Leading the Way ...
...Solutions For every Application
www.dynaflex.com
DFT
Digital File Transfer DynaFlex® is able to print your scanned orthodontic case on our Rapid Prototyping Printers into a physical working model. These models can then be sent into our laboratory for appliance fabrication. The modelbuilding material is a non-toxic durable material that does not break easily like plaster and stone models. The accuracy of the model is exceptional and the appliance fit is better than EVER!
Step 1 – Exporting Your Scan DynaFlex® can except an .stl file from any scanner. Some scanners allow you to export your scans for upload directly to the DynaFlex® online portal, while others have DynaFlex® listed in your Lab Drop Down Menu.
Step 2 – Sending In Your Prescription Filling out your prescription has never been easier! DynaFlex® prescriptions are available for download through the download link on www.dynaflex.com.
Step 3 – Submitting Your Case DynaFlex® makes it easy to submit your case. How you send in your scan and prescriptions may vary based upon the scanner you use. Visit www.dynaflex.com to see the best way to send in your case.
New!
High Contrast Polymer
Scanner Information Align iTero®
DynaFlex® can accept most scans taken through any intra oral scanners. The scanners pictured below are some of our most popular scanners that doctors use to send cases. Still have questions? Call 1-800-489-4020 for assistance. CareStream CS 3500
IMPORTANT NOTE: 3Shape Trios®
3M™ True-Def Cerec® Omnicam
DynaFlex® can accept .stl files from ANY scanner. If your scanner is not listed, call 1-800-489-4020 for more info.
Visit www.dynaflex.com/3d-ortho/scannerinfo to learn more about your scanner.
DMP
Digital Model Printing DynaFlex® can print your scans quick and easy! DynaFlex® has FOUR Stratasys 3D printers in house, ready to print your models! These printers use the highest quality material available in today’s market and will ensure the utmost in accuracy while making your appliance. DynaFlex® can print your scans in 3 different ways, based on your needs.
IMPORTANT NOTE:
Working model print for ABO Study Model Prints DynaFlex Appliances $32 per arch Horseshoe Full Palate Models With Appliance - $9 per arch Without Appliance - $18 per arch
Slim Base Model Prints $22 per arch
If it’s your first time submitting a scan, please contact the 3D.Ortho department at 1-800-489-4020 for initial setup up instructions. Setup is quick and easy!
Visit www.dynaflex.com/brace-erase to view video!
There is no need to remove brackets before you take your scan! DynaFlex® can easily remove brackets for you digitally. Simply check off Bracket Removal on your Rx that you submit for the case. For best results, it is important to capture ALL of the area around the bracket. Removing archwire will ensure better results. ONLY $7 per arch.
DMS
Digital Model Storage DynaFlex® uses the most technologically advanced scanning system available to convert your impressions or models into a 3D image. With each DMS case, you will receive a digital model that you can easily manipulate on your computer screen and a .pdf that contains six views of the case in a 1:1 ratio. All cases are stored forever in five different locations all meeting HIPA standards. If your patient breaks or loses their appliance, you can order a replacement with a simple phone call.
3 Types of Digital Model Storage Full Based Study Model – $29 per set DynaFlex® returns these records to you through the DynaFlex® portal with a full ABO base and a printable 1:1 ratio composite PDF.
Rough Scan – $20 per set DynaFlex® returns these records to you through the DynaFlex® portal without any cleanup or base and printable 1:1 ratio composite PDF.
Simple Storage/Archive Scan – $14.50 per set DynaFlex® will store your scanned models without returning your records to you. If you would like the digital version of your scan sent back to you, an additional $14.50 will be required.
Call 800-489-4020 to learn more about Digital Model Storage options.
104030 International Plaza Dr. St. Ann, MO 63074-0099 800-489-4020 • www.dynaflex.com
Computer Aided Placement DynaFlex® now offers state-of-the-art interactive software to put the control of bracket placement in your hands... DynaFlex’s CAP indirect bonding system utilizes a technologically advanced bracket positioning system. This system places “ridges” around the perimeter of the bracket pad that is a perfect match for your specific bracket system. These ridges are built up on the surface of the “digitally” printed models and hold the brackets in place avoiding possible movement or unwanted rotation of the brackets as the delivery trays are being constructed.
• Use software for patient consultation • View ideal computer aided bracket positioning • See before and after results • Modify or reposition brackets • Approve case for fabrication
LEADING THE WAY
www.dynaflex.com
Laboratory: 800.489.4020 Fax: 314.429.7575
Products: 866.346.5665 Fax: 314.426.1967