CS4 Brochure

THE

ULTIMATE CHAIRSIDE

40% IMPROVEMENT

In Longevity & Durability

Self-Ligating Pivot

CS4® Spring

CORRECTION

APPLIANCE

Magnetic Allen Pencil

Phone: 866.346.5665 | Fax: 314.426.1967 | www.dynaflex.com

40% Improvement *

The all new CS4® is made from an exclusive nickel titanium material with specially built key-hole ends that improve the strength and durability by 40%. The new CS4® spring will load force instantly and remain extremely consistent throughout treatment with the confidence of longer usage. The benefit is a smoother, more constant force that performs better and lasts longer. The CS4® system is one of the most successful Class II and Class III chairside appliances used in the world due to its simplicity, effectiveness and value pricing as compared to other systems available today. The CS4® is a major improvement to an already successful and widely used product.

This is a must have system for your orthodontic tool box.

NEW DESIGN CREATES INSTANT LOADING AND MORE CONSISTENT FORCE LEVELS

Case photos compliments of Dr. Andy Hayes of St. Louis, MO BEFORE

CS4® SPRING AFTER

700 Load (g)

600 500 400

Working Range

300 200 100 0

10 15 20 25 30 35 Position (mm)

YOUR CLASS II & CLASS III SOLUTION This revolutionary system will guarantee results with your Class II and Class III orthodontic cases.

The CS4® Niti springs are a DynaFlex® exclusive, utilizing a patented, instant force (350 grams), closed coil spring and a specially built “key-hole” end which fits over our traditional and NEW SL patented pivot.

Tips For Class II Treatment

Class III Archwire Set-Up Example

No more than 2mm of initial mandibular advancement is recommended. At subsequent visits, reposition the pivots or change from 10mm springs to 7mm springs for further mandibular advancement.

*

Test results were recorded during extremely abusive conditions.

SELF-LIGATING PIVOT The SL pivot was years in the making and has been highly tested for strength and reliability. With the SL pivot, placing the CS® system is faster than ever and will not require the removal of the archwire which greatly reduces patient chair time. Simply slide the door in the open position using our exclusive SL tool, place on the archwire, push the door to the closed position, place the spring, insert and tighten the screw. The SL pivot will be locked on the archwire and ready for spring activation.

Exclusive CS® SL Pivot and Tool

MAGNETIC ALLEN PENCIL We are excited to introduce our new, brilliantly designed CS® Allen Pencil! The new Allen Pencil has been designed and engineered to make placement of the CS® system quicker and safer than ever before. The Allen Pencil is “charged” using an exclusive rare earth magnet. Once charged, it then uses magnetic forces to latch onto the screw. The screw is easily retrievable out of the kit and remains on the Allen Pencil for placement and tightening within the patients mouth.

Magnet Instructions:

CS® Magnetic Allen Pencil

STEP 1: Slide the magnet onto the Allen Pencil tip to activate the magnetic force.

STEP 2: After 2-3 seconds, remove the magnet and set aside.

STEP 3: Proceed with CS® System installation using magnetically charged Allen Pencil.

Magnet

Additional Notes:

Dr. Jacqueline Demko Demko Orthodontics

Strong, Reliable, Fast & Reduces Chairtime

“

“

Magnet is cold sterilizable only. Allen Pencil is heat sterilizable only.

Once magnet and Allen Pencil are sterilized, magnet can be stored engaged with Allen Pencil.

Important: Keep magnet away from electronics, damage could occur.

My entire staff is absolutely in love with the CS® SL Pivot! The unique design allows us to place immediately, without impacting chairtime there is no need to remove and replace wires. They clip on securely right away! Ultimately, it is a HUGE time saver, both chairside and allowing treatment to progress as efficiently as possible with fewer visits.

USING THE HYBRID SCREW

For use in the active position, simply insert the screw into pivot and tighten to lock into desired position on the archwire.

See chart for archwire size needed for locking.

Slot Size

Video Tutorial & Educational Animations - Available online at dynaflex.com

.018

.022

Min. Lock Size

.016 x .022

.018 x .025

Max. Lock Size

.018 x .025

.021 x .025

For use in a passive position, simply cut off the tip of the hybrid screw with a hard wire cutter, allowing the pivot to move freely along archwire.

When used in a passive position, the pivot will be free to slide and rotate on archwire.

IMPORTANT NOTE: Active screw must be used with SL pivot.

REFERENCE PUBLISHED ARTICLES USING THE CS® SYSTEM To view, visit - www.dynaflex.com/CS-System * For detailed information on Class II Correction, reference: “A new, no-compliance Class II correction strategy using nickel-titanium coil-springs.”

* For detailed information on Class III Correction, reference: “Class III correction using an inter-arch spring loaded module”.

Quick and Easy STEP-BY-STEP INSTRUCTIONS SELF-LIGATING PIVOT SETUP STEP 1:

Using our exclusive SL tool, pull the door to the open position.

STEP 2:

Place the SL pivot onto the archwire and the push door closed with index finger.

**The SL Pivot should be used on wire sizes from .016 x .025 up to .021 x .025

STEP 3: Place CS4ÂŽ spring onto pivot and secure in place with hybrid screw.

CLASS II

CLASS III

IMPORTANT NOTE: Active screw must be used with SL pivot.

TRADITIONAL PIVOT SETUP CLASS II

CLASS III

STEP 1:

Place 2 pivots on the upper archwire, position pivots distal to the upper canines, insert and ligate archwire

STEP 1:

UPPER ARCH

LOWER ARCH

Place 2 pivots on the lower archwire, position pivots distal to the lower canines, insert and ligate archwire

STEP 2:

STEP 2:

STEP 3:

STEP 3:

Outside the mouth, assemble a spring, screw and pivot combination. Place assembled components onto the lower archwire. Insert and ligate archwire positioning the pivots mesial to the lower first molars

Using a hemostat, stretch spring eyelet onto the upper pivot and secure in place with a screw

Outside the mouth, assemble a spring, screw and pivot combination. Place assembled components onto the upper archwire. Insert and ligate archwire positioning the pivots mesial to the upper first molars

Using a hemostat, stretch spring eyelet onto the lower pivot and secure in place with a screw

CSÂŽ System can be used on archwires or on a fixed laboratory appliance.

“

“

The Ultimate Chairside Correction Appliance “DynaFlex® CS® is my appliance of choice for Class III correction. It’s easy to place and compatible with all bracket systems. It’s also easy on the patient.

You get excellent, proven results in a short period of time. I am always amazed at how much Class III correction you can achieve in just a couple of visits.“ Dr. Katherine Friedman | Litchfield County Orthodontics

2 Patient Kit Includes: §§ §§ §§ §§ §§ §§

4 CS4® NiTi Springs 8 Pivots (SL or Traditional) 8 Hybrid Screws 1 Allen Pencil 1 Magnet 1 Self-Ligating Tool (With SL Kit Only)

New

MAGNETIC CS4®

5 Patient Kit Includes: §§ §§ §§ §§ §§ §§

10 CS4® NiTi Springs 20 Pivots (SL or Traditional) 20 Magnetic Hybrid Screws 1 Allen Pencil 1 Magnet 1 Self-Ligating Tool (With SL Kit Only)

Master Kit Includes: §§ §§ §§ §§ §§ §§ §§ §§

20 10mm CS4® Springs 20 7mm CS4® Springs 20 Self-Ligating Pivots 20 Traditional Pivots 40 Hybrid Screws 1 Allen Pencil 1 Magnet 1 Self-Ligating Tool

Exclusive CS® Magnet Exclusive CS® Allen Pencil

Exclusive CS® SL Tool

To Order: 866.346.5665 or www.dynaflex.com KITS 2 PATIENT KIT 2 Patient Kit (10mm) 2 Patient Kit (7mm) 5 PATIENT KIT 5 Patient Kit (10mm) 5 Patient Kit (7mm)

MASTER KIT Complete COMPONENT DESCRIPTION CS4® Niti Spring 10mm CS4® Niti Spring 7mm Traditional Pivot .022 x .025 Traditional Pivot .018 x .025

.018 PIVOT #39-1810-2 #39-1807-2 .018 PIVOT #39-1810-5 #39-1807-5

.022 PIVOT #39-2210-2 #39-2207-2 .022 PIVOT #39-2210-5 #39-2207-5

.018 #39M-018 ITEM NUMBER #38094 #38114 #3810-E #3830-E

PRICE $199.95 ea. $199.95 ea.

PRICE $354.95 ea. $354.95 ea.

2 PATIENT KIT - SELF-LIGATING PIVOT KIT 2 Patient Kit (10mm) #39-SL10-2 2 Patient Kit (7mm) #39-SL07-2 5 PATIENT KIT - SELF-LIGATING PIVOT KIT 5 Patient Kit (10mm) #39-SL10-5 5 Patient Kit (7mm) #39-SL07-5

.022 #39M-022

COMPONENTS PRICE COMPONENT DESCRIPTION $18.00 ea.

Self-Ligating Pivot $18.00 ea.

Self-Ligating Tool $10.50 ea.

Hybrid Screw $10.50 ea.

Allen Pencil Magnet

PRICE $244.95 ea. $244.95 ea.

PRICE $399.95 ea. $399.95 ea.

PRICE $999.95 ea.

ITEM NUMBER #3810-SL #3823-SL #3815-5M #3823-EM #3823-500

PRICE

$15.00 ea. $28.50 ea. $2.25 ea. $28.50 ea. $12.00 ea.

10403 International Plaza Dr. St. Ann, MO 63074 866-346-5665

Simple, Effective, Proven, And Now Better Than Ever.

Join the thousands of doctors worldwide that use the CS system and enjoy incredible results.

BEFORE

Class III Treatment

AFTER

AFTER

BEFORE

Class II Treatment

“The CS System is an incredible new development in non-compliance therapy.

The new spring provides a smoother, more consistent force, allowing for better treatment results and increased patient comfort.”

Dr. Michael Williams, DDS, MS | The Gulf Coast Center for Advanced Cosmetic Orthodontics

020217 © 2017 DynaFlex®, St. Louis, MO 63074. Printed in U.S.A. All rights reserved. It is a violation of copyright law to reproduce all or part of this material, including photography, without the permission of DynaFlex®. CS4® patent pending. SL Pivot patent pending. Pivot Patent 6,036,488. Hybrid Screw Patent US D749, 737S.