DS0616 Quickstart Guide

Ver.1

DS0613/0616C Quick Start Guide

1 Hardware Quick Start 1.1 Panel Overview

IPC Power Switch Reset Button

Main Power ON/OFF Switch Circuit Breaker Power Cable

Copyright Š 2007 DynaScan Technology Corp.

1

Ver.1

DS0613/0616C Quick Start Guide

1.2 IPC Installation Please install: 1. Dummy VGA Monitor 2. Audio Cable as the diagram.

2. Audio Cable z Capture Card Audio output to Audio Card Line In

Mouse Keyboard

Line In Line Out Mic In

8 in 1 Card Reader

Tuner In, AV In, Audio In, S-Video In, Audio Out Power Power Switch, Switch, Rest ResetButton Button

USB

COM2 COM1

RJ-45 DVI Out

Power USB

VGA Out

Copyright Š 2007 DynaScan Technology Corp.

Speaker (R) Speaker (L) Volume External Audio In External Enable Switch

1. Dummy VGA Monitor z Please Refer to the Appendix for more Info

Use the NTSC/Pal switch connector for the Capture Card if needed.

2

Ver.1

DS0613/0616C Quick Start Guide

1.3 Display Operation 1.3.1 Display on / off Manually Turn on: Turn on the main power switch then IPC will power on.

Turn off: Turn off the power switch of the IPC. NOTE: If the operating system crashes, please press reset button to restart the IPC and then press power switch again.

1.3.2 Display on / off Automatically You can preset on and off for the display and IPC at a certain time through the software application. When the preset time is up, the display will be powered on automatically, and the IPC will be triggered to power itself on too. If you have preset the item of startup in the software application, the content of the assigned schedule or external multimedia device will be played automatically. (Refer to the software manual for details) NOTE: The main power switch must be always on.

Copyright Š 2007 DynaScan Technology Corp.

3

Ver.1

DS0613/0616C Quick Start Guide

1.3.3 IPC Operation You can use LCM panel to operate the IPC without keyboard and mouse.

Display

Power Indicator

Basic Operation： ENTER：Enter the selected item or save the setting ESC：Go back or Cancel the setting Up/Down： Move the Cursor（>）or

Command Buttons

Change the settings

1.3.4 Put / Change Contents Insert Flash Media card* 1 ,such as MS/MS PRO, SmartMedia, CF/MicroDrive and SD/MMC, into 8-in-1 Card Reader for content playing.

*1

Not include a Flash Media card.

Copyright © 2007 DynaScan Technology Corp.

4

Ver.1

DS0613/0616C Quick Start Guide

Steps

1. Save contents to a Flash Media card. (Media files must put in the root directory when you use LCM playing.)

2. Insert media card into the 8-in-1 card reader.

3. Choose the control item “Player Control”.

4. Choose the sub-menu “File Source”.

5. Select”All Content” to play the all media.

NOTE: 1.Refer to P.21~22 “Operation Tree of the IPC LCM” for more menu items, please.

2. For more instruction of IPC, please refer to the IPC User Manual.

Copyright © 2007 DynaScan Technology Corp.

5

Ver.1

DS0613/0616C Quick Start Guide

1.3.5 Spin Speed Setting The spin speed of the display images. The more “X” is the faster it spins.

Steps 1.

Choose the control item “Monitor System”.

2.

Press Up to increase, or Down to decrease. “Fixed” means to stop spinning.

NOTE: 1.Refer to P.21~22 “Operation Tree of the IPC LCM” for more menu items, please.

2. For more instruction of IPC, please refer to the IPC User Manual.

Copyright © 2007 DynaScan Technology Corp.

6

Ver.1

DS0613/0616C Quick Start Guide

2 Function / Maintenance Introduction 2.1 AP3 Quick Operation 2.1.1 Start Program To activate AP3, click “START/Programs/ DynaScan AP3/DSPlayer to Start. Normally, the AP3 is running if PC power on when your computers are from DynaScan. Double click and AP3 will be restored.

2.1.2 Main Menu and Functions of Buttons Four Sections on Main Menu Section 1. Those buttons are the main Menu of AP3 Section 2. Video Play control: This part is the control bar for controlling the playing item Section 3. Function operation area.

Section 4. Display monitor system.

Copyright © 2007 DynaScan Technology Corp.

7

Ver.1

DS0613/0616C Quick Start Guide

2.1.3 Schedule Editing To setup the background sequence file,

5.

Click

1.

Set the Media type as Sequence File

6.

Set the Media type as Sequence File.

2.

Click

7.

Drag the editing file as following picture.

3.

Drag the file to the box as following picture.

8.

Select the media file you need.

4.

Save the sequence editing file.

9.

Drag the file to the box and editing schedule.

to select path and select the file you need.

Copyright Š 2007 DynaScan Technology Corp.

to select schedule editing.

8

Ver.1

DS0613/0616C Quick Start Guide

2.1.4 Edit Layout Presetting Layout AP3 provides seven layout settings. Click the layout you want, AP3 will load the layout into the editing section and you can start to edit. The Preset layouts are undeletable.

Content Setting There is no content for newly made layout frames. If you do not assign any content to one frame, it will display a black ground when playing. Click

Start Run button to summon the Startup Run Setup window, and then assign

the content and the description of this content. The content with parameters to adjust will show the

button

beside description, and you can click it to setup.

Copyright Š 2007 DynaScan Technology Corp.

9

Ver.1

Copyright Š 2007 DynaScan Technology Corp.

DS0613/0616C Quick Start Guide

10

Ver.1

DS0613/0616C Quick Start Guide

2.1.5 Image Spin Speed Select the spin speed of the image(s) on the display screen. It is a drop-down list, and the options cannot be changed, 8 Sec, 16 Sec, -- to 120 Sec. The 8 Sec. means the drum image takes 8 seconds to rotate a round. The default setting is “Fixed”. This means that image(s) is displayed on the screen in a fixed position. You can choose any of them to fit your needs.

Copyright © 2007 DynaScan Technology Corp.

11

Ver.1

DS0613/0616C Quick Start Guide

2.2 Lift and Move 2.2.1 Lifted by Lift Aided Steel Rope Step 1. Take out the eyebolt (M10) x 3 pcs from the accessories box.

Step 2. Unscrew the six inner screws as shown below.

CAUTION: Before doing it, make sure the power of the display is turned off.

Step 3. Remove the top cover.

CAUTION: Be cautious not to scratch the screen shield

Copyright Š 2007 DynaScan Technology Corp.

12

Ver.1

DS0613/0616C Quick Start Guide

Step 4. Screw the eyebolts (M10*3 pcs) on the display as shown below.

Step 5. Now the display is ready to be lifted up.

CAUTION : (1) The display is about 300(DS0613C) / 400(DS0616C)Kg. (2) Be sure to tighten the eyebolt.

Fasten the eyebolt with the through hole on the top of the display.

Copyright Š 2007 DynaScan Technology Corp.

13

Ver.1

DS0613/0616C Quick Start Guide

Steel Ropes Step 6.Lift the display vertically with a forklift and then move it horizontally.

CAUTION: The length of the three lift aided steel ropes as the drawing below must be equal.

Step 7. Move slowly to the preferred place, and be sure to prevent the display from being hit or scratched by any object.

Step 8. Gently lower down the display.

CAUTION: The display may swing if moved too fast and carelessly

Copyright Š 2007 DynaScan Technology Corp.

14

Ver.1

DS0613/0616C Quick Start Guide

Step 9. Reassemble the top cover.

Copyright Š 2007 DynaScan Technology Corp.

15

Ver.1

DS0613/0616C Quick Start Guide

2.2.2 Installing the Moving Aided Ring (Optional) The moving aided ring can help move the display easily. It is designed with four handles for two persons to move the display by grasping the handles to control the direction and apply strength. It is an optional for you to choose

Fixed Bolt

Cushion

Grasp handle

Package Box

Copyright Š 2007 DynaScan Technology Corp.

16

Ver.1

DS0613/0616C Quick Start Guide

2.3 Ground Mounting Step 1. The assembling parts are as follows: (1) Ground mounting bracket x 3 pcs (2) Anchor x 3 pcs (3) Hexagon-socket-head-cap screw M10 * 30 x 6 pcs (4) Spring-Washerψ10 x 6 pcs (5) Washerψ10 x 6 pcs

Ground Mounting Bracket

Anchor Hexagon-sockethead-cap screw Spring-washer Washer Step 2. Drive the three anchors into the ground with the angles shown below.

Copyright © 2007 DynaScan Technology Corp.

17

Ver.1

DS0613/0616C Quick Start Guide

Step 3. We recommend doing the work by the specialist.

Step 4. Turn the screws to fix the ground-fixing skeleton with the display.

The positions are shown below.

CAUTION: The washer needs to be put into the bolt as the drawing below.

Washer

Spring -washer

Screw M10*30

ANCHOR(38"*221"L)

Copyright Š 2007 DynaScan Technology Corp.

18

Ver.1

DS0613/0616C Quick Start Guide

Step 5. Move the display to the preferred place and use the nuts to fix it.

CAUTION: Ensure the nuts have fastened with the anchor.

SPRING-WASHER WASHER NUT ANCHOR A B

C

NOTE: Please follow the below steps to fix the display.

Copyright Š 2007 DynaScan Technology Corp.

(1) Unscrew A.

(2) Align B with the anchor.

(3) Tighten C.

(4) Tighten A.

19

Ver.1

DS0613/0616C Quick Start Guide

3 Reference 3.1 Specifications Model

DS0613

DS0616 Chip

LED Type Pitch (H x V) Resolution

2.7mm x 2.2mm

2.1mm x 2.2mm

744 x 592 x 1 screen

960 x 720 x 1 screen

Brightness

> 650 cd/㎡

Color

16.7 millions > 5000 : 1

Contrast Ratio Screen Size (Diagonal)

66” Diagonal x 2

75” Diagonal x 2

Total Display Area (W x H)

1.0 m x 1.3 m x 2

1.0 m x 1.6 m x 2 o

>170 x 120

Viewing Angle(H x V)

o

Display Area (D x H)

Φ0.65m x 1.3m

Φ0.65m x 1.6m

Physical Dimension (D x H)

Φ0.83m x 1.97m

Φ0.83m x 2.23m

300Kg

350Kg

Physical Weight Power Supply Color Spectrum Safe Ambient Temperature

Copyright © 2007 DynaScan Technology Corp.

1Φ, AC 200V~240V, 18A Red: 660nm

Green: 525nm o

Blue: 470nm

o

From 0 to 30 C

20

Ver.1

DS0613/0616C Quick Start Guide

3.2 Operation Tree of the IPC LCM Main Menu

Menu Level 1

Menu Level 2

Menu Level 3

Main Menu

Menu Level 1

Monitor System

Spin Speed Power On Power Off Adj Dis Forward Adj Dis Reverse Temperature Power / Motor System Run Time System Alarm Virtual Enc. Brightness LEDM ON/OFF

Play All Close Select Frame

Player Control

Media File Picture File One File -------------- Sequence File Schedule File File Source --------Layout File All Media All Picture All Content SVideo Video Source ------- AV Tuner Channel Play Pause Play Operator ------- Stop Next Prev.

Volume One Two Layout ---------------- Clone Two Clone Three CF/MicroDrive SD/MMC Content Device ----- MS/MSPro SmartMedia Hard Disk

Copyright Š 2007 DynaScan Technology Corp.

Menu Level 2

Menu Level 3

21

Ver.1

DS0613/0616C Quick Start Guide

Main Menu

Menu Level 1

Menu Level 2

Menu Level 3

Main Menu

OS Protect Clock Country Code Tuner ----------------

Network --------------

Auto Run -----------Option Setting Watchdog------------

Window Adjust -----

Display Setting -----Video Out -------------

Input Type -----------

Cable Antenna

Input Pin DHCP Enable IP Address Subnet Mask Default Gateway Set Cancel Host Name Startup Startup Time Shutdown Shutdown Time Reboot Reboot Time Watchdog Watchdog Timer Left Pos. Top Pos Width Height Brightness Contrast Gamma DVI VGA

Test Pattern

Menu Level 1

Menu Level 2

Menu Level 3

White Red Green Pure Color ---------- Blue No Red No Green No Blue White Red Green Level Color ---------- Blue No Red No Green No Blue

Back Light CF/Micro Drive SD/MMC MS/MSPRO Smart Media Stable Embedded OS------Unstable Update Program----

NOTE: For more instruction of IPC, Please refer to the IPC User Manual.

Copyright Š 2007 DynaScan Technology Corp.

22

Ver.1

DS0613/0616C Quick Start Guide

3.3 AP3 Default Settings Click

to start option settings. Default settings are shown below.

Setting Function \ Model

DS0613C

DS0616C

DS0613

DS0616

Remark

Items Select Model Accelerator

Default setting.

VMR9_WL

Default setting.

Screen Type

Screen2

Default setting.

Auto Startup

Enable

Biling Record Enable Startup Computer ID

User Define

Activate the function to keep the log. It needs to reopen AP3 to enable the setting.

User Define

To set a computer ID number for Biling Record for easy maintenance.

Disable

It's necessary to check it when you'd like to display a upside down content. Select VMR9_RL as accelerator and close it. Reopen AP3 to enable the setting.

Setting VMR9_RL Frame Reversal

To auto activate AP3 when the computer starts.

Content in Sequence Preload

User Define

Content in Schedule Preload

User Define

Sequence in Schedule Preload

User Define

Copyright Š 2007 DynaScan Technology Corp.

To shorten the blank interval between clips. It only supports Media File, Capture & Picture. Accelerator VMR9 _ WL supports this function.

To shorten the blank interval between clips. It only supports Media File, Capture & Picture.

To shorten the blank interval between clips. It only supports Media File, Capture & Picture.

23

Ver.1

DS0613/0616C Quick Start Guide

Setting Function \ Model

DS0613C

DS0616C

Remark

Items Serial Port Protocol Ver.

COM3 Auto

Select Monitor System connection port. Default setting is COM3.

Select a correct monitor system edition. Default setting is Auto.

Forward: Move the screen clockwise.

Display Adjust

User Define

Reverse: Move the screen counterclockwise.

Save: Save the setting.

Forcefully turn ON or OFF the display power.

After Power off, you can’t power on the display until six minutes later.

Monitor

This is for the safety reason. However you can power on the display System

Power Control Enable

Enable

before the countdown is due by pressing the “Force Power On”.

Warning: “Force Power On” may cause damage to the display. Please don’t press the button unless you are sure that the display is completely stop operating.

Check the checkbox to enable the setting. When the IPC is turned off

Outside Power Off Enable

Disable

by any way except the shutdown time, such as pressing the Power button. IPC will shut the display as well.

NOTE: For more instruction of AP3, please refer to the AP3 Software Manual.

Copyright © 2007 DynaScan Technology Corp.

24

Ver.1

DS0613/0616C Quick Start Guide

3.4 Legal Notices In te lle ctu al property; limited license to users T he ha rdwa re and so ftwa re o f our pr oduc ts a re pro tec te d b y c op yr ig h t, tr ademark , pa ten t, a nd /o r o the r in te llec tu al pro per ty laws , a nd a n y un au th or ized use o f the s oftwa re , tra de marks co ntaining h ere in ma y vio la te s uch laws and the so ftwa re lic ense a gre eme n t. Excep t as e x press l y p r o v ide d he r e in , D yna Sc an a nd i ts s upp l iers d o no t gra n t an y e xp r ess or i mp l ied r ig hts to use an y p roduc t r e la te d h ardw are a nd so ftwar e.

D yn a Scan is re g istered tr ad ema rk o f D yna Sca n Tech nolog y C orp . in R .O .C an d \or other co un tr ies . Micr oso ft is re g istered tr ad ema rk o f Mic roso ft Cor p . Mo on ligh t is r eg is tere d t r a de mark o f Moo n li gh t c or d les s L td . I B M is re g istered tr ad ema rk o f IBM Co rpor a tion . O ther tra de marks ar e tra demarks o f the ir r espec tive owne rs .

D is c la i me r Sp eci fica tio ns and information contained herein are furnished for informational use only. Revisions are periodically made to the information herein; these revisions will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time and are subject to change without notice, and should not be construed as a commitment made by DynaScan. This manual could include mistyping or typographical errors. DynaScan assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.

E x c lus i on o f D a ma ges : D yn a Sc a n Tec h n o lo g y C o r p o r a t ion ’s l ia b i l i t y i s lim i ted t o t h e c o s t o f r e pair o r r e p la ce me n t o f the pr oduc t.

D yn a Sc an Tec hno lo g y C o r por a ti on s ha ll no t b e l ia bl e for : 1 . Da ma ges to o ther prop er ty c ause d b y a n y d e fec t in the pr oduc t, d amages bas ed up on inco n ven ienc e , loss of us e o f the pr oduc t, loss o f time , loss o f p ro fits , loss o f b usiness o p p o r tu n i t y, l o s s o f g o o d w i l l , i n ter fe r e n c e w it h b u s in e s s r e l a ti o n s h ips , o r o th e r c o mm erc ia l l os s , e v en i f ad v is e d o f t he p os s i b il i t y o f s uc h da mag es .

2 . An y other d amages , wh e the r inc ide ntal, co nseq uen tia l o r o th erw ise .

3 . A n y c la im a ga ins t th e c us t ome r b y an y o t he r par t y.

Copyright Š 2007 DynaScan Technology Corp.

25

Ver.1

DS0613/0616C Quick Start Guide

3.5 Disposal Notices Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new one, the retailer is legally obligated to take back your old appliances for disposal at least for free of charge.

Copyright Š 2007 DynaScan Technology Corp.

26

MEMO