Certificate of Compliance Certificate:
2356372 (25773)
Master Contract:
167807
Project:
2396577
Date Issued:
March 22, 2011
Issued to:
EAO AG Tannwaldstrasse 88 Olten, 4601 Switzerland Attention: Milos Cisar
The products listed below are eligible to bear the CSA Mark shown Omar Elouadrhiri Eng Issued by: Omar Elouadrhiri Eng
PRODUCTS CLASS 3211 03
- INDUSTRIAL CONTROL EQUIPMENT - Motor Controllers - Auxiliary Devices
PART A: Push-button switches may be provided with impulse or push on - push off or selector mechanism. Illuminated or non-illuminated, for flush mounting, with NO and/or NC contacts 1.
Series 01: up to 4 sections with pilot lights, 48V, 1.2W max;
2. Series 02, 03 and 22: single- or d-p, d-t contacts, 300V ac, standard duty, with or without pilot lights 48V, 1.2W max. 3. Series 04: NO- and/or NC contacts, single-pole, 300V ac heavy duty with or without pilot light 250V max. 2.5W 4.
Series 11: up to 4 sections, with pilot lights 6-28V, 0.8W max
5.
Series 14: with up to four sections, with pilot lights 6-48V, 1.2W max or neon light 110V max
6.
Series 15: up to 4 sections
7.
Series 21: up to 3 sections
8.
Series 30: pilot light 6-48V, 1.2W max, up to 4 sections, with double-throw contacts 300V, 5A
DQD 507 Rev. 2009-09-01
Page: 1
Certificate:
2356372 (25773)
Master Contract:
167807
Project:
2396577
Date Issued:
March 22, 2011
9. Series 31: up to 4 sections with pilot lights 6-48V, 1.2W max, with or without integral miniature type fuse 6.3A max 10. Series 32: up to 4 sections 11. Series 41: up to 4 sections with two pilot lights 6-48V, 1.2W max 12. Series 51: pilot light 6-48V, 1.2W max up to 4 sections with double throw contacts 300V ac SD, with or without integral miniature type fuse 6.3A max; or with one or two switch- elements 6A, 250V ac SD (same polarity). 13. Series 52: with rotary mechanism, pilot light 6-48V, 1.2W max, up to 4 sections with double-throw contacts, 300V ac SD, (same polarity) 14. Series 61: pilot light 6-48V, 1.2W max, up to 3 PST (NO and/or NC) A300 PART B: Pilot lights, for flush mounting; 1.
Type 01 with series resistor for 230V, 48V 1.2W max;
2.
Type 11 with series resistor for 230V, 6-28V 0.8W max;
3.
Types 22, 30, 31, 51 and 61 with series resistor for 230V, 6-48V 1.2W max;
4.
Type 41 with series resistor for 230V and with two lamps 6-48V, 1.2W max;
5.
Type 02 with series resistor for 230V, 48V 1.2W max;
6.
Type 03 with series resistor for 230V and with two lamps 48V, 1.2W max;
7.
Type 04 without series resistor, 250V max, 2.4W max.
8.
Type Series 14... for lamps 6-48V, 1.2W max or neon light, 110V max. General
Notes: • Devices are certified only as component parts of other certified equipment, where the acceptability of the combination is determined by the Canadian Standards Association. • The switches are certified for use in equipment where the short circuit capacity of the circuit in which they are connected is limited by fuses having ratings not exceeding the rating of the switches. • The type indication may be followed by a series of figures denoting number of sections, switching action, built-up diodes), etc. • The switches Series 02, 03, 04, 14, 22, 31, 32, 51 and 61 may also be key operated. • The switches Series 01, 11, 14, 15, 21, 30, 31, 41, 51, 52 and 61 may have built-in diodes. • The switch-elements of Series 01, 11, 14, 15, 21, 30, 31, 41, 51 and 52 may have soldering or quick-connect terminals • Series 04 may have Push In Terminal (PIT) instead of Terminal Plate and Screw
DQD 507 Rev. 2009-09-01
Page: 2
Certificate:
2356372 (25773)
Master Contract:
167807
Project:
2396577
Date Issued:
March 22, 2011
APPLICABLE REQUIREMENTS CSA Standard C22.2 No.14-10
DQD 507 Rev. 2009-09-01
-
Industrial Control Equipment
Page: 3
Supplement to Certificate of Compliance 2356372
Certificate:
Master Contract:
167807
The products listed, including the latest revision described below, are eligible to be marked in accordance with the referenced Certificate.
Product Certification History Project
Date
Description
2396577
March 22, 2011
2356372
November 11, 2010
Alternate construction with cage-clamp terminals (PIT) for series 04. And addition of alternate plastic material for series 61. Fusion of repots LR25773-4, LR25773-16, LR25773-17, LR25773-20 and LR25773-21. Addition of alternate material DAP 5562
History LR 25773-24
1993/01/26
Alternate construction
LR 25773-20/21
1989/03/16
Original Certification
Page: 1