HMI Components
Edition 07/2012
Series
57
Characteristics
Functions
Market segments
The Series 57 is especially suited for:
The Series 57 incorporates the following functions:
The EAO Series 57 is especially suited for applications in the segments:
■■
Front mounting ■■
It is characterised by a extra large operating area, two independently illuminated feedback rings and an excellent tactile feedback.
■■
Illuminated pushbutton Warning indicator
■■
Public transportation
Please refer to the EAO website to obtain detailed information regarding this series www.products.eao.com Configure a product to your exact needs and request a quotation.
Content
57 01
Overview
02
Front mounting Pushbutton
570
Warning indicator
573
Accessories
575
Technical data
577
Application guidelines
580
03 04 10 14 17 18 19 22 31 41 44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
569
57 01
Front mounting
Single side pushbutton 3
02
Equipment consisting of
03 Ø 74
04
eao
Ø 89
Front bezel
Switching unit
10 21.2
13.4
18
Dimensions
Product features
90 min. (Ø 89)
• User friendly, extra large operating area of Ø 74 mm
Ø 65
• Two independently illuminated feedback rings
• Integrated finding tone for visually impaired persons
31
• Cable and front bezel are available as single parts
41
• Please fill in the form and forward it to your local EAO partner by e-mail or fax. The electronic form is available at http://www.eao.com/offer57
12
0°
22
0°
• Raised, illuminated symbols conform to TSI PRM & ADA
12
19
Fixing ring
128 min. (Ø 127) 90 min. (Ø 89)
17
The preview is based on a sample product. This can differ from your current configuration.
42
+ 1.4 0
128 min. (Ø 127)
14
Cable
3xM4 Tap hole
Each part listed below includes all the black components shown in the 3D-drawing.
Mounting cut-outs
44 51 56 57 61 70 71 82 84 92 95 96 97
Front bezel plastic
aluminium
green RAL 6032
red RAL 3000
blue RAL 5015
yellow RAL 1023
grey RAL 7040
black RAL 9017
natural anodized
Symbol insert plastic
aluminium
green RAL 6032
red RAL 3000
blue RAL 5015
yellow RAL 1023
natural anodized
grey RAL 7040
Symbol Symbol plastic Symbol aluminium, natural anodized
Symbol aluminium, natural anodized
Symbol illumination with (only plastic symbol inserts)
without
Finding tone standard 65 dB (A)
without
99 Supply voltage
ST
16 – 63 VDC
570
50 – 143 VDC
57
Front mounting
01
Cable exit cable exit left
cable exit right
cable exit top
cable exit bottom
02 03 04 10 14
Cable length A = 200 mm
A = 1000 mm
A = 2000 mm
________ mm
17
Cable and Connector type Cable
Connector Core end-sleeves
4 x 0.50 mm2
AMP MateNLok
Pin 1
1
___
6 x 0.24 mm
WAGO X-COM 769
Pin 2
2
___
6 x 0.50 mm2
DEUTSCH connector
Pin 3
3
___
Pin 4
4
___
Pin 5
5
___
Pin 6
6
___
2
standard
Symbol illumination
Finding tone
Number of strands
Wiring diagram
with
standard
6
VDC = 16 - 63VDC/50 - 143VDC A 5
2
6 4
LED LED
1
I
K
6
6 4
F
1
I
L
2
standard
4
D F
2
1
61
3
3
70
4
71
5 6
LED LED
1
6
L
3
E
57
1
H
4
6
4
VDC = 16 - 63VDC/50 - 143VDC B
56
4
2
5
I
L
44 51
5
G
without
1
3
5
LED LED
41
Configuration Wago-Connector
6
2
E
31
4 LED
VDC = 16 - 63VDC/50 - 143VDC A 5 B C D
22
2
H
3
19
3
G
standard
special
1
2
E
F
Configuration AMP-Connector
3
B C D
without
18
Connector pin assignment
4 x 0.24 mm
2
82
1
1
2
2
3
4
3
84 92
4
H
95
G
96 97 99 ST
571
57
Front mounting
01
Symbol illumination
Finding tone
Number of strands
Wiring diagram
02
with
without
4
VDC = 16 - 63VDC/50 - 143VDC B
03
D
04 10
3 4
1
without
without
4
D
K
4
3 4
H
4
G
Legend A B C D E F G H I K L
= = = = = = = = = = =
44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
572
VDC finding tone VDC outer ring/symbol VDC inner ring VDC Switch Load 0V Inner ring Outer ring Symbol Finding tone
LED
2
E
F
18
41
LED
3
1
31
I
2
3
VDC = 16 - 63VDC/50 - 143VDC B
17
22
LED
1
2
G
14
19
LED
Configuration Wago-Connector
1
2
E
F
Configuration AMP-Connector
LED
H
I
1
1
2
2
3
4
3 4
Front mounting
57 01
Warning indicator Equipment consisting of
02
13.6
03
eao
Ø 89
Ø 74
Front bezel
04
Illumination unit 25.6
10
21.2
Dimensions [mm]
The preview is based on a sample product. This can differ from your current configuration. Product features
90 min. (Ø 89)
Fixing ring
128 min. (Ø 127)
42
Each part listed below includes all the black components shown in the 3D-drawing.
90 min. (Ø 89)
12
0°
0°
12
Cable
+ 1.4 0
• Extra large illuminated lens, Ø 74 mm 128 min. (Ø 127)
Ø 65
• Cable and front bezel are available as single parts • Please fill in the form and forward it to your local EAO partner by e-mail or fax. The electronic form is available at http://www.eao.com/offer57
3xM4 Tap hole
blue RAL 5015
yellow RAL 1023
grey RAL 7040
black RAL 9017
44
natural anodized
51 56
Illumination red
57
yellow
61
Supply voltage 110 VDC
70
Cable exit cable exit left
22
41 aluminium
red RAL 3000
19
31
Front bezel
green RAL 6032
17 18
• LEDs ensure an optimal illumination
Mounting cut-ots [mm]
plastic
14
cable exit right
cable exit top
71
cable exit bottom
82 84 92 95 96 97 99 ST
573
57 01
Front mounting
Cable length A = 200 mm
A = 1000 mm
A = 2000 mm
________ mm
02 Cable + Connector type
03
Cable
Connector
04 10 14
4
17
LED
18 19
0V
1
Wiring diagram 1
22 31 41 44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
574
standard
special
AMP MateNLok
Pin 1
1
___
WAGO X-COM 769
Pin 4
4
___
DEUTSCH connector
+ VDC
Connector pin assignment
Core end-sleeves
2 x 0.50 mm
2
Accessories
57
Front
01
Front bezel
02 03
Additional Information
04
• Special colours for front bezel on request
10 Colour
Front bezel
14
Weight
17
18
Front bezel, Front dimension Ø 89 mm
RAL 9017 similar
Pastic black
0.018 kg
RAL 3000 similar
Plastic red
0.018 kg
RAL 1023 similar
Plastic yellow
0.018 kg
RAL 6032 similar
Plastic green
0.018 kg
RAL 5015 similar
Plastic blue
0.018 kg
RAL 7040 similar
Plastic grey
0.018 kg
Aluminium natural anodized
0.070 kg
19 22 31 41 44
Front bezel, Front dimension Ø 127 mm
RAL 1023 similar
Plastic yellow
0.037 kg
RAL 5015 similar
Plastic blue
0.037 kg
51 56 57 61 70 71 82 84 92 95 96 97 99 ST
575
57
Accessories
01
Mounting
02
Dismantling tool
03 04 10
Part No.
14 17
Weight
57-9901
18 19 22 31 41 44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
576
Dismantling tool to front bezel 0.011 kg
Technical data
57 01
Single side pushbutton Switching system
Electrical characteristics
The Series 57 is equipped with an electronic high side switch, is short circuit proof and overload protected. In case of over current the switch opens automatically (protection against destruction).
Illumination Side-LED green for outer ring Side-LED red for inner ring Point-LED white for symbol illumination
Material Connection cable Halogen-free, flame retardant, cross-linked by e-beam irradiation Polymer according to EN 50306-2 Lens/illumination ring Polycarbonate (PC) Front bezel Polyamide (PA66-GF25) Housing Polyamide (PA66-GF25) Actuator Polyamide (PA66-GF25) Symbole Polyamide (PA12) Mechanical characteristics Terminals AMP Mini Universal MateNLok WAGO X-COM 769 DEUTSCH connector Open ends with core end-sleeves Wire cross-section Wire 4-/6-poles 0.24 mm2 Wire 4-/6-poles 0.5 mm2 Cable length 200 mm, 1000 mm, 2000 mm Fixing screws Countersunk screws M4 x 10 mm Tightening torque max. 100 Ncm Key (mounting and dismantling) Hexagon socket wrench size 2.5 mm Actuating force max. 15 N Actuating travel ~0.5 mm Mechanical lifetime 2 million cycles of operation
02 03 04
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination
10 14
Finding tone Standard tone sequence tone 1: 500 Hz, Tone 2: 700 Hz Sound pressure level: 65 dB (A) ±4 dB @ 10cm (see graphic in «Application guidelines»)
17 18
Units compliant to EN 60947-5-1 EN 50155 EN14752
19
EMC EN 61000-6-2, EN 61000-6-3, EN 50121-3-2, ESD min. 20 kV Cables according to EN 50306-2; VDE 0260-306-2 EN 50306-4; VDE 0260-306-4 NFF 63808 / NFF 61030
22 31 41 44
Symbole and illumination TSI PRM & ADA
51
Operating voltage 16 … 63 VDC (min./max.) 50 … 143 VDC (min./max.)
56 57
Switch rating max. 250 mA
61 70
Standby current 16 … 63 VDC without tone: < 2 mA @ 24 VDC 50 … 143 VDC without tone: < 2 mA @ 110 VDC 16 … 63 VDC with tone: < 10 mA @ 24 VDC 50 … 143 VDC with tone: < 4 mA @ 110 VDC
71 82
Note: Only pin 1 (0 V) und pin 4 (VDC) connected
84
Electric strength 4000 VAC, 50 Hz, 1 min, between all terminals and mounting plate/front element
92 95
Environmental conditions
96
Storage temperature -45 °C … +90 °C
97
Operating temperature -40 °C … +85 °C
99 ST
577
57
Technical data
01 02 03 04 10 14
Protection degree Front side IP 69 K Rear side IP 67
Shock resistance 50 g, pulse width 11 ms, 6 shocks/axis as per DIN EN 60068-2-27
Impact resistance IK07
Vibration resistance Broad band noise as per EN 61373 class 1B 10 g from 10 Hz ... 500 Hz, as per DIN EN 60068-2-6
Climate resistance Damp heat, cyclic 48 hours, +25 °C/97 %, +55 °C/93 % relative humidity, as per EN IEC 60068-2-30
18
Damp heat, state 56 days, +40 °C/93 % relative humidity, as per EN IEC 60068-2-78 Salt spray 96 h (DIN EN 60068-2-11)
19
Rapid change of temperature 5 cycles, -45 °C … +90 °C, as per EN IEC 60068-2-14
17
22 31 41 44
Declaration of conformity CE TSI/PRM
Material
Electrical characteristics
Connection cable Halogen-free, flame retardent, cross-linked by e-beam irradiation Polymer according to EN 50306-2
Illumination LED red, yellow Supply voltage 110 VDC ±30 % Current consumption < 50 mA
Lens Polyamide (PA12)
56
Front bezel Polyamide (PA66-GF25)
61
Approbations E1 EBC NFF
Warning indicator
51
57
Approvals
Housing Polyamide (PA66-GF25)
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination Units compliant to EN 60947-5-1 EN 50155 EN14752 EMC EN 61000-6-2, EN 61000-6-3, EN 50121-3-2
70
Mechanical characteristics
71
Terminals AMP Mini Universal MateNLok WAGO X-COM 769 DEUTSCH connector Open ends with core end-sleeves
Cables according to EN 50306-2; VDE 0260-306-2 EN 50306-4; VDE 0260-306-4 NFF 63808 / NFF 61030
Wire cross-section Cable 2-poles 0.5mm²
Environmental conditions
Cable length 200 mm; 1000 mm; 2000 mm
Storage temperature -45 °C … +90 °C
Fixing screws Countersunk screws M4 x 10 mm
Operating temperature -40 °C … +85 °C
Tightening torque max. 100 Ncm
Protection degree Front side IP 69K
82 84 92 95 96 97 99 ST
Key (mounting and dismantling) Hexagon socket wrench size 2.5 mm
578
Technical data
57 01
Climate resistance Damp heat, state 56 days, +40 °C/93 % relative humidity, as per EN IEC 60068-2-78
Approvals
02
Declaration of conformity CE
03
Rapid change of temperature 5 cycles, -45 °C … +90 °C, as per EN IEC 60068-2-14
04
Shock resistance (semi-sinusoidal) max. 500 m/s², pulse width 11 ms, as per EN IEC 60068-2-27
10
Vibration resistance (sinusoidal) max. 100 m/s² at 10 Hz … 500 Hz, as per EN IEC 60068-2-6
17
14
18 19
EAO reserves the right to alter specifications without further notice.
22 31 41 44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
579
57 01
Application guidelines
Finding tone Volume
02 03
F1
A
04
F2
10
Time T1
14 17 18
T2
T3
T4
T1
N
T5
T3
T6
M B
Diagram F1
Frequency 1 of a tone sequence
19
T2
Playing time tone 1
T4
Break
22
N
Number of repetitions of tone 1
F2
Frequency 2 of a tone sequence
31
T5
Playing time tone 2
T6
Break
41
M
Number of repetitions of tone 2
A
Volume level (Âą8 dB) @ 10 cm
44
B
Number of repetitions of the complete tone sequence, or blockage of the tone sequence
T1
Fade-in tone 1 and 2
51
T3
Fade-out tone 1 and 2
56
Tone sequence Parameter
Standard Finding tone
F1
500 Hz
T2
100 ms
T4
200 ms
N
1
F2
700 ms
T5
100 ms
T6
900 ms
57 61
Tone 1
70 71
Tone 2
82 84
General
92 95
Other finding tone on request.
96 97 99 ST
580
M
1
A
65 dB (A)
B
â&#x2C6;&#x17E;
T1
100 ms
T3
100 ms