HMI Components
Edition 12/2012
Series
84
Characteristics
Functions
Market segments
The compact 22.5 mm Series 84 is especially suited for:
The Series 84 incorporates the following functions:
The EAO Series 84 is especially suited for applications in the segments:
■■ ■■ ■■
Flush design Raised design PCB mounting
■■ ■■ ■■ ■■
The extremely small mounting depth makes this series highly suited for installation in flat, narrow casings. In combination with PCB fitting, Series 84 offers optional HALO illumination with attractive combination options and a wide variety of designs.
Indicator Pushbutton Illuminated pushbutton E-STOP switch
■■ ■■ ■■ ■■ ■■ ■■ ■■
Public transport Machinery and Automation Construction machines and special-purpose vehicles Lifting and moving Panel building Medicinal technology Laboratory and measuring equipment
Please refer to the EAO website to obtain detailed information regarding this series www.products.eao.com Configure a product to your exact needs and request a quotation.
Content
84 01
Overview
02
Flush design Indicator
758
Illuminated pushbutton
760
Pushbutton
764
Indicator with halo illumination
768
Pushbutton with halo illumination
770
Indicator with halo illumination (multi-colour)
772
Pushbutton with halo illumination (multi-colour)
773
03 04 10 14 17
Raised design Emergency-stop switch
774
Stop switch
776
Accessories
778
Drawings
803
Technical data
805
Application guidelines
809
Index
810
18 19 22 31 41 44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
757
84 01
Flush design
Indicator standard
02
Equipment consisting of (schematic overview) Ă˜25
03
P1
M1 M2 M5
F1
2
300 Âą10
23
6 max.
10
M1
M5
M2
Ă˜32
Product can differ from the current configuration.
18
NJO Âą NN
• Illuminated lens, non-illuminated bezel
NJO Âą NN
51
PLQ
PLQ
• The colour of anodized aluminium parts can vary due to technical production reasons
44
To obtain a complete unit, please select the red components from the pages shown.
Additional Information
Âą
41
page 785
Each Part Number listed below includes all the black components shown in the 3D-drawing.
Dimensions [mm] F1 = Flat ribbon cable, P1 = Plug-in terminal 2.8 x 0.8 mm, M1 = Lens level with bezel, M2 = Lens raised above bezel M5 = Mushroom-head cap
22
Fixing nut
Illumination element 9.5
4
19
Actuator
23
14
31
page 778
9
04
17
Lens
3 NBY
56
Mounting cut-outs [mm]
57 61 70
Front protection
Front ring
Part No.
Weight
71 82 84
Indicator actuator standard, Front dimension Ă˜ 25 mm
IP 40
Plastic black
84-3100.0
0.004 kg
IP 67
Plastic black
84-0100.0
0.003 kg
Aluminium natural anodized
84-0200.7
0.008 kg
92 95 96 97 99 ST
758
Flush design
84 01
Indicator PCB standard
Equipment consisting of (schematic overview)
02
M5
M2
03 Ă˜32
page 778 Ă˜25
Lens
M1
04
Actuator
Fixing nut
2
Mounting flange
page 791
LED
page 793
Illumination element
18
10
9.5
4
4max. 3.6
14
Dimensions [mm] M1 = Lens level with bezel, M2 = Lens raised above bezel M5 = Mushroom-head cap
Product can differ from the current configuration.
17 18
page 790
NJO Âą NN
Additional Information
NJO Âą NN
• Illuminated lens, non-illuminated bezel
Each Part Number listed below includes all the black components shown in the 3D-drawing. PLQ
PLQ
• The colour of anodized aluminium parts can vary due to technical production reasons
Âą
To obtain a complete unit, please select the red components from the pages shown.
19 22 31
3 NBY
41
44
Mounting cut-outs [mm]
51 Front protection
Front ring
Part No.
Weight
56 57
61
Indicator actuator PCB standard, Front dimension Ă˜ 25 mm
IP 40
Plastic black
84-3100.0
0.004 kg
IP 67
Plastic black
84-0100.0
0.003 kg
Aluminium natural anodized
84-0200.7
0.008 kg
70 71 82 84 92 95 96 97 99 ST
759
84 01
Flush design
Illuminated pushbutton standard
02
Equipment consisting of (schematic overview) Ă˜25
03
P1
F1
9
04
300 Âą10
23
6 max.
Lens
page 778
Actuator
23
2
10
Fixing nut Ă˜40
14 17
M1 M2 M5
Product can differ from the current configuration.
P1
F1
M1
Switching element
page 787
9
18 19
Each Part Number listed below includes all the black components shown in the 3D-drawing.
300 Âą10
21
3 max. 21
4
M1
Ă˜32
22
To obtain a complete unit, please select the red components from the pages shown.
M5
M2
31 Dimensions [mm] F1 = Flat ribbon cable, P1 = Plug-in terminal 2.8 x 0.8 mm, M1 = Lens level with bezel, M2 = Lens raised above bezel, M5 = Mushroom-head cap
44 51
NJO Âą NN
• Illuminated lens, non-illuminated bezel
NJO Âą NN
NJO Âą NN
• The colour of anodized aluminium parts can vary due to technical production reasons
70
3 NBY
71
NJO
Âą
61
PLQ
57
Additional Information
PLQ
56
9.5
4
41
Âą
Mounting cut-outs [mm]
82
92
Front protection
Front ring
Switching action
Part No.
Wiring diagram
84
Weight
84-1221.7
1
0.022 kg
95 96
IP 67
Illuminated pushbutton standard, Front dimension Ă˜ 40 mm Aluminium natural anodized
B
97 99 ST
Illuminated pushbutton standard, Front dimension Ă˜ 25 mm
IP 40
Plastic black
B
84-2101.0
1
0.004 kg
IP 67
Plastic black
B
84-1101.0
1
0.003 kg
Aluminium black anodized
B
84-1201.0
1
0.008 kg
Aluminium red anodized
B
84-1201.2
1
0.008 kg
760
84 01
Front protection
Front ring
Switching action
Part No.
Wiring diagram
Flush design
Weight
IP 67
Aluminium gold anodized
B
84-1201.4
1
0.008 kg
Aluminium olive-green anodized
B
84-1201.5
1
0.008 kg
Aluminium blue anodized
B
84-1201.6
1
0.008 kg
Aluminium natural anodized
B
84-1201.7
1
0.008 kg
Switching action: B = Momentary
02 03 04 10 14 17 18 19
Wiring diagram 1
22 31 41 44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
761
84 01
Flush design
Illuminated pushbutton PCB standard
02
M1 M2 M5
M1
Equipment consisting of (schematic overview)
03 04
Actuator
10
4max. 18
2
14
M1
3max.
3.6
19
M5
M2
9.5
4
31 Additional Information
NJO Âą NN
• Illuminated lens, non-illuminated bezel
NJO Âą NN
Mounting flange
page 791
LED
page 793
Switching element
page 789
Each Part Number listed below includes all the black components shown in the 3D-drawing.
Dimensions [mm] M1 = Lens level with bezel, M2 = Lens raised above bezel, M5 = Mushroom-head cap
22
To obtain a complete unit, please select the red components from the pages shown.
NJO Âą NN
56
3 NBY
57
NJO
Âą
51
PLQ
• The colour of anodized aluminium parts can vary due to technical production reasons PLQ
44
Fixing nut
3.6
Product can differ from the current configuration.
18
41
16
4
Ă˜32
17
page 778
Ă˜40
Ă˜25
Lens
Âą
Mounting cut-outs [mm]
70
Front protection
Front ring
Switching action
Part No.
Wiring diagram
61 Weight
84-1221.7
1
0.022 kg
84-2101.0
1
0.004 kg
71 82 84
Illuminated pushbutton actuator PCB standard, Front dimension Ă˜ 40 mm
IP 67
Aluminium natural anodized
B
92 95 96
Illuminated pushbutton actuator PCB standard, Front dimension Ă˜ 25 mm
IP 40 IP 67
Plastic black
B
Plastic black
B
84-1101.0
1
0.003 kg
Aluminium black anodized
B
84-1201.0
1
0.008 kg
97
Aluminium red anodized
B
84-1201.2
1
0.008 kg
Aluminium gold anodized
B
84-1201.4
1
0.008 kg
99
Aluminium olive-green anodized
B
84-1201.5
1
0.008 kg
Aluminium blue anodized
B
84-1201.6
1
0.008 kg
Aluminium natural anodized
B
84-1201.7
1
0.008 kg
ST
Switching action: B = Momentary
762
Flush design
84 01 02 03 04
Wiring diagram 1
10 14 17 18 19 22 31 41 44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
763
84 01
Flush design
Pushbutton standard
02 Ă˜25
03
P1
F1
9
04
300 Âą10
23
6 max.
Equipment consisting of (schematic overview) Lens
page 779
Actuator
23
2
10 Product can differ from the current configuration.
Ă˜40
Fixing nut
14 17
M1 M2 M3 M4 M5
P1
F1
M1
Switching element
page 789
9
18
4
19
M1
Each Part Number listed below includes all the black components shown in the 3D-drawing.
300 Âą10
21
3 max. 21 M2
M4
M3
M5
Ă˜32
22
To obtain a complete unit, please select the red components from the pages shown.
31 4
41
51 56 Additional Information
NJO Âą NN
• Non-illuminated lens and bezel
NJO Âą NN
NJO Âą NN
71
3 NBY
82
NJO
Âą
70
PLQ
• The colour of anodized aluminium parts can vary due to technical production reasons PLQ
61
9.5
7
Dimensions [mm] F1 = Flat ribbon cable, P1 = Plug-in terminal 2.8 x 0.8 mm, M1 = Lens level with bezel, M2 = Lens raised above bezel, M3 = Lens konvexe level with bezel, M4 = Lens convexe raised above bezel, M5 = Mushroom-head cap
44
57
5
Âą
Mounting cut-outs [mm]
92
Front protection
Front ring
Switching action
Part No.
Wiring diagram
84 Weight
84-1221.7
1
0.022 kg
95 96 97
IP 67
99 ST
764
Pushbutton actuator standard, Front dimension Ă˜ 40 mm Aluminium natural anodized
B
Front protection
Front ring
Switching action
Part No.
Wiring diagram
Flush design
84 01 Weight
02 03
Pushbutton actuator standard, Front dimension Ă˜ 25 mm
IP 40 IP 67
Plastic black
B
84-2101.0
1
0.004 kg
Plastic black
B
84-1101.0
1
0.003 kg
Aluminium black anodized
B
84-1201.0
1
0.008 kg
Aluminium red anodized
B
84-1201.2
1
0.008 kg
Aluminium gold anodized
B
84-1201.4
1
0.008 kg
Aluminium olive-green anodized
B
84-1201.5
1
0.008 kg
Aluminium blue anodized
B
84-1201.6
1
0.008 kg
Aluminium natural anodized
B
84-1201.7
1
0.008 kg
Switching action: B = Momentary
04 10 14 17 18 19 22 31 41 44
Wiring diagram 1
51 56 57 61 70 71 82 84 92 95 96 97 99 ST
765
84 01
Flush design
Pushbutton PCB standard
02
M1 M2 M3 M4 M5
M1
Equipment consisting of (schematic overview)
03 04
Actuator
10
4max. 18
2
14
M1
M2
3max.
3.6
16
4 M4
M3
M5
Product can differ from the current configuration.
18 19
9.5
7
41 Additional Information
NJO Âą NN
• Non-illuminated lens and bezel
NJO Âą NN
Fixing nut
Mounting flange
page 791
Switching element
page 789
Each Part Number listed below includes all the black components shown in the 3D-drawing. To obtain a complete unit, please select the red components from the pages shown.
Dimensions [mm] F1 = Flat ribbon cable, P1 = Plug-in terminal 2.8 x 0.8 mm, M1 = Lens level with bezel, M2 = Lens raised above bezel, M3 = Lens konvexe level with bezel, M4 = Lens convexe raised above bezel, M5 = Mushroom-head cap
31
NJO Âą NN
57
3 NBY
61
NJO
Âą
56
PLQ
• The colour of anodized aluminium parts can vary due to technical production reasons PLQ
51
5
4
22
44
3.6
Ă˜32
17
page 779
Ă˜40
Ă˜25
Lens
Âą
Mounting cut-outs [mm]
Part No.
Wiring diagram
70 Weight
84-1221.7
1
0.022 kg
71 Front protection
Front ring
Switching action
82 84 92
IP 67
95 96 97 99 ST
766
Pushbutton actuator PCB standard, Front dimension Ă˜ 40 mm Aluminium natural anodized
B
Front protection
Front ring
Switching action
Part No.
Wiring diagram
Flush design
84 01 Weight
02 03
Pushbutton actuator PCB standard, Front dimension Ă˜ 25 mm
IP 40 IP 67
Plastic black
B
84-2101.0
1
0.004 kg
Plastic black
B
84-1101.0
1
0.003 kg
Aluminium black anodized
B
84-1201.0
1
0.008 kg
Aluminium red anodized
B
84-1201.2
1
0.008 kg
Aluminium gold anodized
B
84-1201.4
1
0.008 kg
Aluminium olive-green anodized
B
84-1201.5
1
0.008 kg
Aluminium blue anodized
B
84-1201.6
1
0.008 kg
Aluminium natural anodized
B
84-1201.7
1
0.008 kg
Switching action: B = Momentary
04 10 14 17 18 19 22 31 41 44
Wiring diagram 1
51 56 57 61 70 71 82 84 92 95 96 97 99 ST
767
84 01
Flush design
Indicator with halo illumination standard, IP 67
02
Equipment consisting of (schematic overview) Ă˜25
03
P1
M2 M4
F1
Lens
9
04 2
300 Âą10
23
6 max.
10
Actuator
23 M4
M2
Fixing nut
14 Product can differ from the current configuration.
18
4
22
41
page 785
Each Part Number listed below includes all the black components shown in the 3D-drawing.
7
Dimensions [mm] F1 = Flat ribbon cable, P1 = Plug-in terminal 2.8 x 0.8 mm, M2 = Lens raised above bezel, M4 = Lens convexe raised above bezel
19
31
Illumination element
To obtain a complete unit, please select the red components from the pages shown.
Additional Information NJO
• Front bezel illuminated • Accessories for halo illumination: Essential lenses Part No. 84-7202.x00A and 84-7205.x00A ¹
44
PLQ
17
page 780
51
3 NBY
56 Mounting cut-outs [mm]
57 61 70
Front ring
71 82
92 95 96 97 99 ST
768
Weight
84-0090.7
0.006 kg
Indicator actuator with halo illumination standard, Front dimension Ă˜ 25 mm
Plastic colourless translucent
84
Part No.
Flush design
84 01
Indicator with halo illumination PCB standard, IP 67
Equipment consisting of (schematic overview)
02
M4
03
page 780 Ă˜25
Lens
M2
M2 M4
04
Actuator 4
4max.
Fixing nut
2
Mounting flange
page 791
LED
page 793
Illumination element
18
10
7
3.6
14
Dimensions [mm] M2 = Lens raised above bezel, M4 = Lens convexe raised above bezel
Product can differ from the current configuration.
17 18
Additional Information NJO
page 790
• Front bezel illuminated
Âą
To obtain a complete unit, please select the red components from the pages shown.
PLQ
Each Part Number listed below includes all the black components shown in the 3D-drawing.
• Accessories for halo illumination: Essential lenses Part No. 84-7202.x00A and 84-7205.x00A
19 22 31
3 NBY
41 Mounting cut-outs [mm]
44 51
Front ring
Part No.
Weight
56 57
Indicator actuator with halo illumination PCB standard, Front dimension Ă˜ 25 mm
Plastic colourless translucent
84-0090.7
0.006 kg
61 70 71 82 84 92 95 96 97 99 ST
769
84 01
Flush design
Pushbutton actuator with halo illumination standard, IP 67
02
Equipment consisting of (schematic overview) Ă˜25
03
P1
M2 M4
F1
Lens
9
04
300 Âą10
23
6 max.
Actuator
23
2
10
M4
M2
Fixing nut
14 Product can differ from the current configuration.
Switching element
18
4
22 31 41
Each Part Number listed below includes all the black components shown in the 3D-drawing.
7
Dimensions [mm] F1 = Flat ribbon cable, P1 = Plug-in terminal 2.8 x 0.8 mm, M2 = Lens raised above bezel, M4 = Lens convexe raised above bezel
19
page 787
To obtain a complete unit, please select the red components from the pages shown.
Additional Information NJO
• Front bezel illuminated • Accessories for halo illumination: Essential lenses Part No. 84-7202.x00A and 84-7205.x00A ¹
44
PLQ
17
page 780
51
3 NBY
56 Mounting cut-outs [mm]
Part No.
Wiring diagram
57 Weight
84-1091.7
1
0.006 kg
61 70
Front ring
71 82 84
Switching action
Switching action: B = Momentary
92 95 96 97
Pushbutton actuator with halo illumination standard, Front dimension Ă˜ 25 mm
Plastic colourless translucent
Wiring diagram 1
99 ST
770
B
Flush design
84 01
Pushbutton with halo illumination PCB standard, IP 67
Equipment consisting of (schematic overview)
02
M4
03
page 780 Ă˜25
Lens
M2
M2 M4
04
Actuator 4
4max.
Fixing nut
18
2
Mounting flange
page 791
LED
page 793
10
7
3.6
14
Dimensions [mm] M2 = Lens raised above bezel, M4 = Lens convexe raised above bezel
Product can differ from the current configuration.
17 18
Additional Information NJO
page 789
• Front bezel illuminated
Âą
Each Part Number listed below includes all the black components shown in the 3D-drawing.
PLQ
Switching element
To obtain a complete unit, please select the red components from the pages shown.
• Accessories for halo illumination: Essential lenses Part No. 84-7202.x00A and 84-7205.x00A
19 22 31
3 NBY
41 Mounting cut-outs [mm]
Switching action
Part No.
Wiring diagram
Front ring
44 51 Weight
56 57
Pushbutton actuator with halo illumination PCB standard, Front dimension Ă˜ 25 mm
Plastic colourless translucent
B
84-1091.7
1
0.006 kg
Switching action: B = Momentary
61 70 71 82 84 92
Wiring diagram 1
95 96 97 99 ST
771
84 01
Flush design
Indicator with halo illumination (multi-colour) PCB, IP 67
02
M1 M2 M3 M4
Equipment consisting of (schematic overview)
03 04
Actuator
10
4max. 18
2
14 17
M1
M2
Befestigungsmutter
3.6 M4
M3
Product can differ from the current configuration.
18 7
Dimensions [mm] M1 = Lens level with bezel, M2 = Lens raised above bezel, M3 = Lens konvexe level with bezel, M4 = Lens convexe raised above bezel
22 31
Mounting flange
page 791
Single-LED
page 793
Illumination element
page 790
Each Part Number listed below includes all the black components shown in the 3D-drawing. To obtain a complete unit, please select the red components from the pages shown.
Additional Information NJO
• The LEDs are not part of delivery. Recommendation: Osram Hyper Mini TOPLED
Âą
51
PLQ
44
5
4
19
41
page 778
Ă˜25
Lens
56
3 NBY
57
Mounting cut-outs [mm]
61 70
Front ring
Part No.
Weight
84-0080.7
0.006 kg
71 82 84
Indicator actuator with halo illumination (multi-colour) PCB, Front dimension Ă˜ 25 mm
Plastic colourless transparent
92 95 96 97 99 ST
772
Flush design
84 01
Pushbutton actuator with halo illumination (multi-colour) PCB, IP 67
03
page 778 Ă˜25
Lens
02
M1 M2 M3 M4
Equipment consisting of (schematic overview)
04
Actuator
10
4max. 18
2
Fixing nut M1
Mounting flange
page 791
LED
page 793
Switching element
page 789
Each Part Number listed below includes all the black components shown in the 3D-drawing. To obtain a complete unit, please select the red components from the pages shown.
M2
3.6
14
M4
M3
Product can differ from the current configuration.
17 18
5
4
7
19
Dimensions [mm] M1 = Lens level with bezel, M2 = Lens raised above bezel, M3 = Lens konvexe level with bezel, M4 = Lens convexe raised above bezel
22 31 Additional Information
NJO
Âą
PLQ
• The LEDs are not part of delivery. Recommendation: Osram Hyper Mini TOPLED
41 44 51
3 NBY
56
57
Mounting cut-outs [mm]
Front ring
Switching action
Part No.
Wiring diagram
61 Weight
70 71
82
Pushbutton actuator with halo illumination (multi-colour) PCB, Front dimension Ă˜ 25 mm
Plastic colourless transparent
B
84-1081.7
1
0.006 kg
84
Switching action: B = Momentary
92 95 96 97 99
Wiring diagram 1
ST
773
84 01
Raised design
Emergency-stop switch complete, foolproof EN IEC 60947-5-5, IP 65 1...4
03
P
Equipment consisting of (schematic overview)
Ă˜ 32
02
04 10
26
Actuator
9.5 18
14 17
Fixing nut F1
Product can differ from the current configuration.
Each Part Number listed below includes all the black components shown in the 3D-drawing.
18 Dimensions [mm] F1 = Flat ribbon cable, P = Plug-in terminal 2.8 x 0.5 mm
22
51
• Lens plastic red
• Switching action maintain
3 NBY
• Twist to unlock clockwise • Application as per DIN EN ISO 13850 and EN 60204-1 • Standard version: Flat ribbon-cable length 300 mm or plug-in terminal 2.8 x 0.5 mm
56
• Other options on request: Customisation of flat ribbon-cable and connectors
57
• Luminosity and wave length scattering caused by LED manufacturing processes may cause slight variations in the illumination
NJO
44
NJO
41
Additional Information
31
300 Âą 10
13.5
19
Âą
Mounting cut-outs [mm]
71
Product attribute
LED colour
Contacts
Terminal
Part No.
Wiring diagram
70
Component layout
61
Weight
82 84
Emergency-stop switch complete, foolproof EN IEC 60947-5-5, Front dimension Ă˜ 32 mm
Position indication ring green
92 Single-LED red
95 96
Position indication ring black
97 Single-LED red
99 ST
774
1 NC
Flat ribbon cable
84-5120.0040
1
1
0.036 kg
1 NC + 1 NO
Flat ribbon cable
84-5130.0040
1
2
0.036 kg
2 NC
Flat ribbon cable
84-5140.0040
1
3
0.036 kg
1 NC
Flat ribbon cable
84-5121.2B40
1
4
0.036 kg
1 NC + 1 NO
Flat ribbon cable
84-5131.2B40
1
5
0.036 kg
2 NC
Flat ribbon cable
84-5141.2B40
1
6
0.036 kg
1 NC
Flat ribbon cable
84-5020.0040
1
1
0.036 kg
1 NC + 1 NO
Flat ribbon cable
84-5030.0040
1
2
0.036 kg
2 NC
Flat ribbon cable
84-5040.0040
1
3
0.036 kg
1 NC
Flat ribbon cable
84-5021.2B40
1
4
0.036 kg
1 NC + 1 NO
Flat ribbon cable
84-5031.2B40
1
5
0.036 kg
2 NC
Flat ribbon cable
84-5041.2B40
1
6
0.036 kg
LED colour
Contacts
Terminal
Part No.
Wiring diagram
Product attribute
Component layout
Raised design
84 01 Weight
02 03
Emergency-stop switch complete, foolproof EN IEC 60947-5-5, Front dimension Ø 32 mm
Position indication ring green
1 NC
Single-LED red
Position indication ring black
Single-LED red
84-5120.0020
Plug 2.8 x 0.5 mm
2
1
0.028 kg
1 NC + 1 NO
Plug 2.8 x 0.5 mm
84-5130.0020
2
2
0.028 kg
2 NC
Plug 2.8 x 0.5 mm
84-5140.0020
2
3
0.028 kg
1 NC
Plug 2.8 x 0.5 mm
84-5121.2B20
2
3
0.028 kg
1 NC + 1 NO
Plug 2.8 x 0.5 mm
84-5131.2B20
2
5
0.028 kg
2 NC
Plug 2.8 x 0.5 mm
84-5141.2B20
2
6
0.028 kg
1 NC
Plug 2.8 x 0.5 mm
84-5020.0020
2
1
0.028 kg
1 NC + 1 NO
Plug 2.8 x 0.5 mm
84-5030.0020
2
2
0.028 kg
2 NC
Plug 2.8 x 0.5 mm
84-5040.0020
2
3
0.028 kg
1 NC
Plug 2.8 x 0.5 mm
84-5021.2B20
2
4
0.028 kg
1 NC + 1 NO
Plug 2.8 x 0.5 mm
84-5031.2B20
2
5
0.028 kg
2 NC
Plug 2.8 x 0.5 mm
84-5041.2B20
2
6
0.028 kg
Contacts: NC = Normally closed, NO = Normally open The component layouts you will find from page 803
11
11
04 10 14 17 18 19 22 31
23
11
21
11
X2+
11
41
23 X2+
44 12
Wiring diagram 1
11
12
Wiring diagram 2
24
12
Wiring diagram 3
22
12
Wiring diagram 4
X1–
12
51
24 X1–
56
Wiring diagram 5
57
21 X2 +
61 12
70
22 X1–
71
Wiring diagram 6
82 84 92 95 96 97 99 ST
775
84 01
Raised design
Stop switch complete grey, IP 65
02
1...4
03
Equipment consisting of (schematic overview)
Ă˜32
P
04 10
26
Actuator
9.5 18
14 17
Fixing nut Product can differ from the current configuration.
F1
Each Part Number listed below includes all the black components shown in the 3D-drawing.
18 300 Âą 10
13.5
19
Dimensions [mm] F1 = Flat ribbon cable, P = Plug-in terminal 2.8 x 0.5 mm
22 31
Additional Information
41
• Switching action maintain
NJO
• Lens plastic grey
3 NBY
• Position indication ring black
51 56 57
• Twist to unlock clockwise
44
NJO
• Standard version: Flat ribbon-cable length 300 mm or plug-in terminal 2.8 x 0.5 mm • Other options on request: Customisation of flat ribbon-cable and connectors • Luminosity and wave length scattering caused by LED manufacturing processes may cause slight variations in the illumination
Âą
Mounting cut-outs [mm]
LED colour
Wiring diagram
70
Component layout
61
Weight
1 NC
Flat ribbon cable
84-6820.0040
1
1
0.036 kg
1 NC + 1 NO
Flat ribbon cable
84-6830.0040
1
2
0.036 kg
2 NC
Flat ribbon cable
84-6840.0040
1
3
0.036 kg
1 NC
Flat ribbon cable
84-6821.2B40
1
4
0.036 kg
1 NC + 1 NO
Flat ribbon cable
84-6831.2B40
1
5
0.036 kg
2 NC
Flat ribbon cable
84-6841.2B40
1
6
0.036 kg
Contacts
Terminal
Part No.
71 82
84 92
Single-LED red
95 96 97 99 ST
776
Stop switch complete grey, Front dimension Ă˜ 32 mm
Contacts
Terminal
Part No.
Wiring diagram
LED colour
Component layout
Raised design
84 01 Weight
02 03
Stop switch complete grey, Front dimension Ø 32 mm
Single-LED red
1 NC
Plug 2.8 x 0.5 mm
84-6820.0020
2
1
0.028 kg
1 NC + 1 NO
Plug 2.8 x 0.5 mm
84-6830.0020
2
2
0.028 kg
2 NC
Plug 2.8 x 0.5 mm
84-6840.0020
2
3
0.028 kg
1 NC
Plug 2.8 x 0.5 mm
84-6821.2B20
2
4
0.028 kg
1 NC + 1 NO
Plug 2.8 x 0.5 mm
84-6831.2B20
2
5
0.028 kg
2 NC
Plug 2.8 x 0.5 mm
84-6841.2B20
2
6
0.028 kg
Contacts: NC = Normally closed, NO = Normally open The component layouts you will find from page 803
11
11
04 10 14 17 18
23
11
21
11
X2+
11
19
23 X2+
22 12
Wiring diagram 1
11
12
Wiring diagram 2
24
12
Wiring diagram 3
22
12
Wiring diagram 4
X1–
12
31
24 X1–
41
Wiring diagram 5
44
21 X2 +
51 12
56
22 X1–
57
Wiring diagram 6
61 70 71 82 84 92 95 96 97 99 ST
777
84
Accessories
01
Front
02
Lens plastic
03 04
Additional Information • Lens profile flat
10 14
Product attribute
Dimension
Lens
Mounting type
Part No.
Weight
17 18 19
Lens plastic
illuminative
Ø 19.7 mm
red transparent
level with bezel
84-7111.200
0.001 kg
orange transparent
level with bezel
84-7111.300
0.001 kg
22
yellow transparent
level with bezel
84-7111.400
0.001 kg
green transparent
level with bezel
84-7111.500
0.001 kg
31
blue transparent
level with bezel
84-7111.600
0.001 kg
colourless transparent
level with bezel
84-7111.700
0.001 kg
41 44
non-illuminative
Ø 19.7 mm
illuminative
Ø 19.7 mm
51 56 57 61 70 71
non-illuminative
Ø 19.7 mm
black opaque
level with bezel
84-7121.000
0.001 kg
grey opaque
level with bezel
84-7121.800
0.001 kg
red transparent
raised above bezel
84-7115.200
0.001 kg
orange transparent
raised above bezel
84-7115.300
0.001 kg
yellow transparent
raised above bezel
84-7115.400
0.001 kg
green transparent
raised above bezel
84-7115.500
0.001 kg
blue transparent
raised above bezel
84-7115.600
0.001 kg
colourless transparent
raised above bezel
84-7115.700
0.001 kg
black opaque
raised above bezel
84-7125.000
0.001 kg
grey opaque
raised above bezel
84-7125.800
0.001 kg
Marking plate Additional Information • Can be hot stamped
82 84
Marking plate
Part No.
Weight
61-9707.7
0.001 kg
92 95 96
Legend plate for lens plastic
Plastic colourless transparent
97 99 ST
778
Accessories
84 01
Lens plastic with symbol
02
Additional Information • Lens profile flat
03
• Illuminative • The silvery coat is being applied on the lens (screen print) with an additional protective lacquer. Further information see «Technical data»
04 10 14
Dimension
Lens
Mounting type
Symbol
Part No.
Weight
17 18
Lens plastic with symbol
Ø 19.7 mm
red transparent
level with bezel
Ring
84-7111.201
0.002 kg
orange transparent
level with bezel
Ring
84-7111.301
0.002 kg
yellow transparent
level with bezel
Ring
84-7111.401
0.002 kg
green transparent
level with bezel
Ring
84-7111.501
0.002 kg
blue transparent
level with bezel
Ring
84-7111.601
0.002 kg
colourless transparent
level with bezel
Ring
84-7111.701
0.002 kg
19 22 31 41
44
Lens plastic with symbol
Ø 19.7 mm
red transparent
level with bezel
ON/OFF
84-7111.202
0.002 kg
green transparent
level with bezel
ON/OFF
84-7111.502
0.002 kg
blue transparent
level with bezel
ON/OFF
84-7111.602
0.002 kg
colourless transparent
level with bezel
ON/OFF
84-7111.702
0.002 kg
51 56 57
61
Lens plastic with symbol
Ø 19.7 mm
red transparent
level with bezel
Stand by
84-7111.203
0.002 kg
green transparent
level with bezel
Stand by
84-7111.503
0.002 kg
blue transparent
level with bezel
Stand by
84-7111.603
0.002 kg
colourless transparent
level with bezel
Stand by
84-7111.703
0.002 kg
70 71 82
Lens metal
84
Additional Information
92
• The colour of anodized aluminium parts can vary due to technical production reasons
95 96
Product attribute
Dimension
Lens
Mounting type
Part No.
97
Weight
99 flat
Lens metal Ø 25 mm
Aluminium black anodized
level with bezel
84-7201.000
0.003 kg
Ø 19.7 mm
Aluminium red anodized
level with bezel
84-7201.200
0.003 kg
ST
779
84
Accessories
01 02
Product attribute
Dimension
Lens
Mounting type
Part No.
Weight
flat
Ø 19.7 mm
Aluminium gold anodized
level with bezel
84-7201.400
0.003 kg
Aluminium olive-green anodized
level with bezel
84-7201.500
0.003 kg
Aluminium blue anodized
level with bezel
84-7201.600
0.003 kg
Aluminium natural anodized
level with bezel
84-7201.800
0.003 kg
Aluminium black anodized
raised above bezel
84-7205.000
0.003 kg
Aluminium red anodized
raised above bezel
84-7205.200
0.003 kg
03 04 10 14 17
Aluminium gold anodized
raised above bezel
84-7205.400
0.003 kg
Aluminium olive-green anodized
raised above bezel
84-7205.500
0.003 kg
Aluminium blue anodized
raised above bezel
84-7205.600
0.003 kg
Aluminium natural anodized
raised above bezel
84-7205.800
0.003 kg
18 19
Lens metal
convex (domed)
Ø 19.7 mm
22 31 41 44 51 56 57
Aluminium black anodized
level with bezel
84-7202.000
0.003 kg
Aluminium red anodized
level with bezel
84-7202.200
0.003 kg
Aluminium gold anodized
level with bezel
84-7202.400
0.003 kg
Aluminium olive-green anodized
level with bezel
84-7202.500
0.003 kg
Aluminium blue anodized
level with bezel
84-7202.600
0.003 kg
Aluminium natural anodized
level with bezel
84-7202.800
0.003 kg
Lens
Mounting type
Part No.
Weight
Lens for halo illumination Additional Information • Lens profile flat or convex (domed)) • The colour of anodized aluminium parts can vary due to technical production reasons
61 70
Product attribute
Dimension
71 82
flat
Lens metall for halo illumination Ø 19.7 mm
84 92 95
Aluminium black anodized
raised above bezel
84-7205.000A
0.003 kg
Aluminium red anodized
raised above bezel
84-7205.200A
0.003 kg
Aluminium gold anodized
raised above bezel
84-7205.400A
0.003 kg
Aluminium olive-green anodized
raised above bezel
84-7205.500A
0.003 kg
Aluminium blue anodized
raised above bezel
84-7205.600A
0.003 kg
Aluminium natural anodized
raised above bezel
84-7205.800A
0.003 kg
96 97
convex (domed)
99 ST
780
Lens metall for halo illumination Ø 19.7 mm
Aluminium black anodized
raised above bezel
84-7202.000A
0.004 kg
Aluminium red anodized
raised above bezel
84-7202.200A
0.004 kg
Aluminium gold anodized
raised above bezel
84-7202.400A
0.004 kg
Aluminium olive-green anodized
raised above bezel
84-7202.500B
0.004 kg
Aluminium blue anodized
raised above bezel
84-7202.600A
0.004 kg
Aluminium natural anodized
raised above bezel
84-7202.800A
0.004 kg
Accessories
84 01
Lens for stop request pushbutton
02
Additional Information • Lens profile flat • With raised labelling symbol, TSI compliant
03
• The colour of anodized aluminium parts can vary due to technical production reasons
04 10
Dimension
Lens
Mounting type
Symbol
Part No.
14
Weight
17 Ø 19.7 mm
18
Lens metal for halo illumination with raised symbol Aluminium natural anodized
raised above bezel
Door open
84-7205.804A
0.003 kg
19 22
Ø 19.7 mm
Lens metal for halo illumination with raised symbol Aluminium natural anodized
raised above bezel
Wheelchair
84-7205.805A
31
0.003 kg
41 Ø 19.7 mm
44
Lens metal for halo illumination with raised symbol Aluminium natural anodized
raised above bezel
Baby carriage
84-7205.806A
0.003 kg
51 56
Ø 19.7 mm
Lens metal for halo illumination with raised symbol Aluminium natural anodized
raised above bezel
Bell
84-7205.808A
57
0.003 kg
61 70 71 82 84 92 95 96 97 99 ST
781
84 01 02 03
Accessories
Lens metal with dot Additional Information • Lens profile flat • The colour of anodized aluminium parts can vary due to technical production reasons
04 10 14
Product attribute
Dimension
Lens
Mounting type
Part No.
Weight
17 18
illuminative
19
Lens metal with dot Ă˜ 19.7 mm
Aluminium black anodized
level with bezel
84-7211.000
0.002 kg
Aluminium red anodized
level with bezel
84-7211.200
0.002 kg
Aluminium gold anodized
level with bezel
84-7211.400
0.002 kg
22
Aluminium olive-green anodized
level with bezel
84-7211.500
0.002 kg
Aluminium blue anodized
level with bezel
84-7211.600
0.002 kg
31
Aluminium natural anodized
level with bezel
84-7211.800
0.002 kg
Aluminium black anodized
raised above bezel
84-7215.000
0.002 kg
41
Aluminium red anodized
raised above bezel
84-7215.200
0.002 kg
Aluminium gold anodized
raised above bezel
84-7215.400
0.002 kg
44
Aluminium olive-green anodized
raised above bezel
84-7215.500
0.002 kg
Aluminium blue anodized
raised above bezel
84-7215.600
0.002 kg
Aluminium natural anodized
raised above bezel
84-7215.800
0.002 kg
51 56 57 61 70 71 82 84 92 95 96 97 99 ST
782
Accessories
84 01
Mushroom-head cap
02 Product attribute
Mushroom-head cap
Part No.
03
Weight
04
10
Mushroom-head cap, Front dimension Ø 32 mm
illuminative
Plastic blue
84-7114.600A
0.004 kg
non-illuminative
Plastic black
84-7124.000A
0.004 kg
Plastic red
84-7124.200A
0.004 kg
Plastic yellow
84-7124.400A
0.004 kg
Plastic green
84-7124.500A
0.004 kg
Plastic blue
84-7124.600A
0.004 kg
14 17 18 19
Front protective cap, IP 68
22
Additional Information
31
• For flat lense profil only • When using the front protection cover the external sealing in the actuator has to be removed
41 44
Material
Colour
Optics
Part No.
51
Weight
56
57
Front protective cap
Silicone
colourless
transparent
84-9103.7
0.001 kg
61
Legend frame
70 71
Additional Information • For devices with front dimension Ø 25 mm, flush design
82
• The colour of anodized aluminium parts can vary due to technical production reasons
84 92
Dimension
Material
Colour
Mounting type
Part No.
95
Weight
96
Legend frame
30 x 50 x 0.75 mm
Aluminium
black anodized
adhesive
61-9980.0
97
0.001 kg
99 ST
783
84 01 02 03
Accessories
Legend plate Additional Information • For legend frame Part No. 61-9980.0 • The colour of anodized aluminium parts can vary due to technical production reasons
04 10 14
Dimension
Material
Colour
Mounting type
Part No.
Weight
17 Legend plate for legend frame
19 22
Blind plug, IP 65
31
Additional Information
44
• Please note that bigger minimum distances are necessary
adhesive
704.968.0
0.001 kg
adhesive
704.968.1
0.001 kg
16.5 ... 20.5
Ø25
41
2
• The dimensions of the mounting cut-outs are shown in the product details
natural anodized black anodized
51
2.6
14
Ø 35.6
Aluminium
Ø 36.2
14.5 x 23.5 mm
23.5
18
1 ... 5
2…6
56 Dimensions [mm]
57 61 70
Product attribute
Dimension
Mounting cut-out
Material
Colour
Part No.
Weight
Ø 25 mm
Ø 22.5 mm
Plastic
black
61-9453.0
0.006 kg
Ø 36 mm
Ø 30.5 mm
Plastic
black
704.964.8
0.007 kg
71 82
Blind plug
with this print version of the panel thickness is reduced to 2.5 mm max.
84 92
95 96 97 99 ST
784
Blind plug
Accessories
84
Rear side
01
Illumination element, IP 40
02 03
Additional Information
04
• LED and built-in resistor included • Standard version: Cable length 300 mm with insulated ferrule, plug-in terminal 2.8 x 0.8 mm
10
• Other options on request: Customisation of cable and connectors, rear side fully sealed (IP 67)
14
• Protection degree (rear side): IP 40, upgrade to IP 67 with plug Part No. 84-900 possible. With applications where strong vibrations occure, the plugs may become loose
17
• Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination
18
Protection degree
LED colour
Operating voltage
Operation current
Terminal
Part No.
Wiring diagram
19 22 Weight
31 41
IP 40
Illumination element Single-LED red
12 VDC ±10 %
10 mA
Plug 2.8 x 0.8 mm
84-8001.2320
1
0.005 kg
Single-LED orange
12 VDC ±10 %
10 mA
Plug 2.8 x 0.8 mm
84-8001.3320
1
0.005 kg
Single-LED yellow
12 VDC ±10 %
10 mA
Plug 2.8 x 0.8 mm
84-8001.4320
1
0.005 kg
Single-LED green
12 VDC ±10 %
10 mA
Plug 2.8 x 0.8 mm
84-8001.5320
1
0.005 kg
Single-LED blue
12 VDC ±10 %
10 mA
Plug 2.8 x 0.8 mm
84-8001.6320
1
0.005 kg
Single-LED white
12 VDC ±10 %
10 mA
Plug 2.8 x 0.8 mm
84-8001.9320
1
0.005 kg
Single-LED red
24 VDC ±10 %
10 mA
Plug 2.8 x 0.8 mm
84-8001.2620
1
0.005 kg
Single-LED orange
24 VDC ±10 %
10 mA
Plug 2.8 x 0.8 mm
84-8001.3620
1
0.005 kg
Single-LED yellow
24 VDC ±10 %
10 mA
Plug 2.8 x 0.8 mm
84-8001.4620
1
0.005 kg
Single-LED green
24 VDC ±10 %
10 mA
Plug 2.8 x 0.8 mm
84-8001.5620
1
0.005 kg
Single-LED blue
24 VDC ±10 %
10 mA
Plug 2.8 x 0.8 mm
84-8001.6620
1
0.005 kg
Single-LED white
24 VDC ±10 %
10 mA
Plug 2.8 x 0.8 mm
84-8001.9620
1
0.005 kg
44 51 56 57 61 70 71
IP 40
82
Illumination element Single-LED red
12 VDC ±10 %
10 mA
Flat ribbon cable
84-8001.2340
1
0.010 kg
Single-LED orange
12 VDC ±10 %
10 mA
Flat ribbon cable
84-8001.3340
1
0.010 kg
Single-LED yellow
12 VDC ±10 %
10 mA
Flat ribbon cable
84-8001.4340
1
0.010 kg
Single-LED green
12 VDC ±10 %
10 mA
Flat ribbon cable
84-8001.5340
1
0.010 kg
Single-LED blue
12 VDC ±10 %
10 mA
Flat ribbon cable
84-8001.6340
1
0.010 kg
Single-LED white
12 VDC ±10 %
10 mA
Flat ribbon cable
84-8001.9340
1
0.010 kg
Single-LED red
24 VDC ±10 %
10 mA
Flat ribbon cable
84-8001.2640
1
0.010 kg
Single-LED orange
24 VDC ±10 %
10 mA
Flat ribbon cable
84-8001.3640
1
0.010 kg
Single-LED yellow
24 VDC ±10 %
10 mA
Flat ribbon cable
84-8001.4640
1
0.010 kg
Single-LED green
24 VDC ±10 %
10 mA
Flat ribbon cable
84-8001.5640
1
0.010 kg
Single-LED blue
24 VDC ±10 %
10 mA
Flat ribbon cable
84-8001.6640
1
0.010 kg
Single-LED white
24 VDC ±10 %
10 mA
Flat ribbon cable
84-8001.9640
1
0.010 kg
84 92 95 96 97 99 ST
785
84 01
Accessories
X2 +
02 03
X1 –
04
Wiring diagram 1
14 17 18 19 22 31
Illumination element bi-colour Additional Information • LED and built-in resistor included • Standard version: Cable length 300 mm with insulated ferrule, plug-in terminal 2.8 x 0.8 mm • Other options on request: Customisation of cable and connectors, rear side fully sealed (IP 67). • Best illumination level will be reached with aluminium lens with spot, Part No. 84-7215.x00 and 84-7211.x00 • Protection degree (rear side): IP 40, upgrade to IP 67 with plug Part No. 84-900 possible. With applications where strong vibrations occure, the plugs may become loose
41
• Cabel connection IP 67, rear side fully sealed. The illumination element of the cable version cannot be disconnected from the actuator any longer
44
• Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination
51 56 57
Protection degree
LED colour
Operating voltage
Operation current
Terminal
Part No.
Wiring diagram
10
Weight
61 70
IP 40
71
Illumination element with bi-colour illumination Bi-colour LED red/green
24 VDC ±10 %
20 mA
Plug 2.8 x 0.8 mm
84-8005.8620
1
0.005 kg
Bi-colour LED yellow/green
24 VDC ±10 %
20 mA
Plug 2.8 x 0.8 mm
84-8005.7620
1
0.005 kg
82
92 95
X3 + X1 – X2 +
97 99
grün
96
0V
24 V
rot oder gelb
24 V
Wiring diagram 1
ST
786
Illumination element with bi-colour illumination Bi-colour LED yellow/green
24 VDC ±10 %
20 mA
Flat ribbon cable
84-8005.7640
2
0.011 kg
Bi-colour LED red/green
24 VDC ±10 %
20 mA
Flat ribbon cable
84-8005.8640
2
0.011 kg
gb
+ 24 V
bl
0V
rt
+24 V rot oder gelb
IP 67
grün
84
Wiring diagram 2
Accessories
84 01
Switching element with illumination
02
Additional Information • LED and built-in resistor included
03
• Standard version: Cable length 300 mm with insulated ferrule, plug-in terminal 2.8 x 0.8 mm
04
• Other options on request: Customisation of cable and connectors, rear side fully sealed (IP 67)
10
• Protection degree (rear side): IP 40, upgrade to IP 67 with plug Part No. 84-900 possible. With applications where strong vibrations occure, the plugs may become loose
14
• Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination
17
Protection degree
LED colour
Operating voltage
Operation current Contacts
Terminal
Part No.
Wiring diagram
18 19
Weight
22 IP 40
31
Switching element with illumination Single-LED red
12 VDC ±10 %
10 mA
1 NO
Plug 2.8 x 0.8 mm
84-8511.2320
1
0.006 kg
Single-LED orange
12 VDC ±10 %
10 mA
1 NO
Plug 2.8 x 0.8 mm
84-8511.3320
1
0.006 kg
Single-LED yellow
12 VDC ±10 %
10 mA
1 NO
Plug 2.8 x 0.8 mm
84-8511.4320
1
0.006 kg
Single-LED green
12 VDC ±10 %
10 mA
1 NO
Plug 2.8 x 0.8 mm
84-8511.5320
1
0.006 kg
Single-LED blue
12 VDC ±10 %
10 mA
1 NO
Plug 2.8 x 0.8 mm
84-8511.6320
1
0.006 kg
Single-LED white
12 VDC ±10 %
10 mA
1 NO
Plug 2.8 x 0.8 mm
84-8511.9320
1
0.006 kg
Single-LED red
24 VDC ±10 %
10 mA
1 NO
Plug 2.8 x 0.8 mm
84-8511.2620
1
0.006 kg
Single-LED orange
24 VDC ±10 %
10 mA
1 NO
Plug 2.8 x 0.8 mm
84-8511.3620
1
0.006 kg
Single-LED yellow
24 VDC ±10 %
10 mA
1 NO
Plug 2.8 x 0.8 mm
84-8511.4620
1
0.006 kg
Single-LED green
24 VDC ±10 %
10 mA
1 NO
Plug 2.8 x 0.8 mm
84-8511.5620
1
0.006 kg
Single-LED blue
24 VDC ±10 %
10 mA
1 NO
Plug 2.8 x 0.8 mm
84-8511.6620
1
0.006 kg
Single-LED white
24 VDC ±10 %
10 mA
1 NO
Plug 2.8 x 0.8 mm
84-8511.9620
1
0.006 kg
41 44 51 56 57 61 70
IP 40
71
Switching element with illumination Single-LED red
12 VDC ±10 %
10 mA
1 NO
Flat ribbon cable
84-8511.2340
1
0.015 kg
Single-LED orange
12 VDC ±10 %
10 mA
1 NO
Flat ribbon cable
84-8511.3340
1
0.015 kg
Single-LED yellow
12 VDC ±10 %
10 mA
1 NO
Flat ribbon cable
84-8511.4340
1
0.015 kg
Single-LED green
12 VDC ±10 %
10 mA
1 NO
Flat ribbon cable
84-8511.5340
1
0.015 kg
Single-LED blue
12 VDC ±10 %
10 mA
1 NO
Flat ribbon cable
84-8511.6340
1
0.015 kg
Single-LED white
12 VDC ±10 %
10 mA
1 NO
Flat ribbon cable
84-8511.9340
1
0.015 kg
Single-LED red
24 VDC ±10 %
10 mA
1 NO
Flat ribbon cable
84-8511.2640
1
0.015 kg
Single-LED orange
24 VDC ±10 %
10 mA
1 NO
Flat ribbon cable
84-8511.3640
1
0.015 kg
Single-LED yellow
24 VDC ±10 %
10 mA
1 NO
Flat ribbon cable
84-8511.4640
1
0.015 kg
Single-LED green
24 VDC ±10 %
10 mA
1 NO
Flat ribbon cable
84-8511.5640
1
0.015 kg
Single-LED blue
24 VDC ±10 %
10 mA
1 NO
Flat ribbon cable
84-8511.6640
1
0.015 kg
Single-LED white
24 VDC ±10 %
10 mA
1 NO
Flat ribbon cable
84-8511.9640
1
0.015 kg
82 84 92 95 96 97 99
Contacts: NO = Normally open
ST
787
84 01
3
X2 +
4
X1 –
Accessories
02 03 04 10 14 17
Wiring diagram 1
Switching element bi-colour Additional Information • LED and built-in resistor included
18
• Protection degree IP 67, rear side fully sealed. The switching element cannot be disconnected from the actuator any longer
19
• Best illumination level will be reached with aluminium lens with spot, Part No. 84-7215.x00 and 84-7211.x00
22
• Standard version: Cable length 300 mm with insulated ferrule
31 41
• Other options on request: Customisation of cable and connectors • Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination
Wiring diagram
44 Weight
24 VDC ±10 %
20 mA
1 NO
Flat ribbon cable
84-8515.8640
1
0.015 kg
Bi-colour LED yellow/green 24 VDC ±10 %
20 mA
1 NO
Flat ribbon cable
84-8515.7640
1
0.015 kg
51 Protection degree
LED colour
Operating voltage
Operation current
Contacts Terminal
Part No.
56 57
70 71
Bi-colour LED red/green
Contacts: NO = Normally open
gr
82
gb
gn
+ 24 V
Wiring diagram 1
95 96 97 99 ST
788
ws
0V
grün
84 92
Switching element with bi-colour illumination
bn
+ 24 V rot oder gelb
61
IP 67
Accessories
84 01
Switching element without illumination
02
Additional Information • Standard version: Cable length 300 mm with insulated ferrule, plug-in terminal 2.8 x 0.8 mm
03
• Other options on request: Customisation of cable and connectors, rear side fully sealed (IP 67)
04
• Protection degree (rear side): IP 40, upgrade to IP 67 with plug Part No. 84-900 possible. With applications where strong vibrations occure, the plugs may become loose
10
Protection degree
Contacts
Terminal
Part No.
Wiring diagram
14 17 Weight
18 19
Switching element without illumination
IP 40
1 NO
Plug 2.8 x 0.8 mm
84-8510.0020
1
22
0.005 kg
31
41
Switching element without illumination
IP 40
1 NO
Flat ribbon cable
84-8510.0040
1
0.010 kg
44
Contacts: NO = Normally open
51 3
56 57 4
61 Wiring diagram 1
70 Switching element PCB illuminative
71
Additional Information
82 9.3
4
92 95
12.5
2 4
5.08
1 3
84 1
3.6
12.5
10.16
• LED and mounting flange to be ordered separately
5.7
Ø8
• The customer has to decide what series resistor shall be used to the LED
.8 16
96 97
Dimensions [mm]
99 ST
789
Wiring diagram
Weight
3
1
0.001 kg
Part No.
Component layout
Accessories Component layout
84
Weight
92-800.042
4
0.001 kg
01 02
Contacts
Terminal
Switching action
Part No.
B
92-851.342
03 04 10 14 17
Switching element PCB mounting illuminative
1 NO
PCB
Contacts: NO = Normally open Switching action: B = Momentary The component layouts you will find from page 803
3
4
1
2
Wiring diagram 1
31
Illumination element PCB
41
Additional Information
44
• The customer has to decide what series resistor shall be used to the LED • LED and mounting flange to be ordered separately
.8
16
8
0.
51
4
22
5.7
19
1.6
18
x 6.35
8
0.
56 12.5
57 Dimensions [mm]
61 70 71
Terminal
82 84 92
IIlumination element PCB mounting
PCB The component layouts you will find from page 803
95 96 97 99 ST
790
Accessories
84 01
Mounting flange
02
6.85
24.5
03 R 2.2
04
7.35
30 Âą 0.05 4
10
7.1
20
14 R2.2 21.55 Âą 0.1
17
4.9
18
Dimensions [mm]
19 Product attribute
Part No.
22
Weight
31
41
Mounting flange
Halo illumination (illuminated multi-color bezel)
84-960.0
0.001 kg
44
51
Mounting flange 92-960.0
Standard version
56
0.001 kg
57
Flat receptacle
61 70 Product attribute
Part No.
Weight
71
82
Flat receptacle
2.8 x 0.8 mm plug-in terminal
84-9420
0.001 kg
84 92
Insulation sleeve
95 Product attribute
Part No.
96
Weight
97
99
Insulation sleeve
for flat receptacle 2.8 mm
31-929
0.001 kg
ST
791
84 01
Accessories
Plug
02
Additional Information
03
• For back protection IP67 of switching elements and illumination elements. Two plugs are nessecary per element
04 10 14
Part No.
17 18
Weight
84-900
19 22 31 41 44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
792
Plug 0.001 kg
Accessories
84
Illumination
01
Single-LED, T1 Bi-Pin
02 03
Additional Information • The customer has to decide what series resistor shall be used to the LED
04
• Luminosity and wave length scattering caused by LED manufacturing processes may cause slight variations in the illumination
10 14 17
LED colour
Forward voltage typ.
Lumi. intensity
Dom. wavelength
Part No.
Weight
18 19
Single-LED
Single-LED red
2.1 VDC @ 20 mA
200 mcd
625 nm
10-2602.3202L
0.001 kg
Single-LED orange
2.1 VDC @ 20 mA
220 mcd
590 nm
10-2602.3203L
0.001 kg
Single-LED yellow
3.3 VDC @ 20 mA
500 mcd
570 nm
10-2602.3204L
0.001 kg
Single-LED green
3.5 VDC @ 20 mA
250 mcd
525 nm
10-2602.3205L
0.001 kg
Single-LED blue
3.5 VDC @ 20 mA
450 mcd
470 nm
10-2602.3206L
0.001 kg
Single-LED white
3.3 VDC @ 20 mA
600 mcd
x=0.29/y=0.31 nm
10-2602.3209L
0.001 kg
22 31 41 44
Bi-colour-LED, T1 Bi-Pin
51 56
Additional Information • The customer has to decide what series resistor shall be used to the LED
57
• Luminosity and wave length scattering caused by LED manufacturing processes may cause slight variations in the illumination
61 70
LED colour
Forward voltage typ.
Lumi. intensity
Dom. wavelength
Part No.
71
Weight
82
84
Bi-colour-LED
Bi-colour LED red/green
2.0/3.2 VDC @ 20 mA
310/800 mcd
625/528 nm
10-2603.308AL
0.001 kg
Bi-colour LED yellow/green
2.0/3.2 VDC @ 20 mA
350/750 mcd
591/528 nm
10-2603.308CL
0.001 kg
92 95 96 97 99 ST
793
84
Accessories
01
Emergency-stop and Stop pushbutton
02
Emergency-stop legend
03 04
Additional Information • Front panel thickness 3 mm max.
10 14
Dimension
Mounting cut-out
Marking
Colour
Part No.
Weight
17 18
Emergency-stop legend Ø 22.5 mm
22 31
Ø 90 x 1 mm
Ø 22.5 mm
41
51 56 57 61 70
yellow
704.963.5
0.011 kg
yellow
704.963.6
0.011 kg
ARRET D›URGENCE
yellow
704.963.7
0.011 kg
NOT HALT
yellow
704.963.8
0.011 kg
NOT AUS
yellow
704.963.0
0.011 kg
EMERGENCY STOP
yellow
704.963.1
0.011 kg
ARRET D›URGENCE
yellow
704.963.2
0.011 kg
NOT HALT
yellow
704.963.3
0.011 kg
E-stop protective shroud Additional Information
11
1.8
• Front panel thickness 1 ... 3 mm
Ø22.5
• With anti-twist device Ø50.2
44
NOT AUS EMERGENCY STOP
• When using a protective shroud the e-stop or stop-switch has to be turned by 180° to be mounted. See dimensional drawing • The protection shroud Part No. 84-909 is not suitable for a proper use of emergency-stop. It can obstruct a spontaneous operation of the emergency-stop switch
Ø31.8
19
Ø 59 x 1 mm
1.5
26
2.5 Ø22.5
82
Ø37
Ø45
71 1
84 92 Dimensions [mm]
95 96 97
Front protection
Dimension
Mounting cut-out
Marking
Material
Colour
Part No.
Weight
Plastic
yellow
84-902
0.006 kg
Plastic
yellow
84-902A
0.006 kg
99 ST
IP 65
E-stop protective shroud Ø 50 mm
Ø 22.5 mm NOT - AUS
794
Accessories
84 01
Front protection
Dimension
Mounting cut-out
Marking
Colour
Part No.
Weight
IP 65
Ø 50 mm
Ø 22.5 mm
EMERGENCY STOP Plastic
Material
yellow
84-902B
0.006 kg
NOT - HALT
yellow
84-902D
0.006 kg
Plastic
02 03 04
E-stop protective shroud
IP 40
Ø 45 mm
Ø 22.5 mm
Metal
yellow RAL 1003
84-909
10
0.021 kg
14 Fixing nut
17 18
Product attribute
Dimension
Material
Colour
Part No.
19
Weight
22
Fixing nut
For limited-space applications
Ø 28 mm
Plastic
black
84-905
31
0.002 kg
41
44
Fixing nut
Standard delivery
Ø 30 mm
Plastic
black
84-908
0.002 kg
51
Emergency-stop enclosure, IP 66
56 57
Additional Information 65
2.5
• Bottom grey similar RAL 7035; cover lead-sealable, yellow similar RAL 1004
61 70
25
• Openings for cable gland M16 or M20
65
57
• With mounting cut-out Ø 22.5 mm, with anti- twist device
71 82 Dimensions [mm]
84 92 Dimension
Part No.
Weight
95 96
65 x 65 x 57 mm
Emergency-stop enclosure 84-910
97
0.099 kg
99 ST
795
84 03
Additional Information • Cover lead-sealable
B
H
04
L
02
Stop switch enclosure, IP 66
2.5
01
Accessories
10 14 Dimensions [mm]
17 18 19
Product attribute
Dimension
Material
Colour
Part No.
Weight
L 94 x B 94 x H 81 mm
Plastic
grey, similar RAL 7035
704.945.1
0.211 kg
L 130 x B 94 x H 81 mm
Plastic
grey, similar RAL 7035
704.945.2
0.251 kg
L 180 x B 94 x H 81 mm
Plastic
grey, similar RAL 7035
704.945.3
0.313 kg
L 180 x B 182 x H 110 mm
Plastic
grey, similar RAL 7035
704.945.4
0.572 kg
L 180 x B 182 x H 110 mm
Plastic
grey, similar RAL 7035
704.945.5
0.568 kg
22 31
Enclosure
with mounting cut-out 1 x Ø 22.5 mm, with anti-twist device
41 44
Enclosure
with mounting cut-out 2 x Ø 22.5 mm, with anti-twist device
51 56 57
Enclosure
with mounting cut-out 3 x Ø 22.5 mm, with anti-twist device
61 70
Enclosure
with mounting cut-out 4 x Ø 22.5 mm, with anti-twist device
71 82 84
Enclosure
with mounting cut-out 6 x Ø 22.5 mm, with anti-twist device
92 95 96 97 99 ST
796
Accessories
84 01
PCB plug-in base
02
2.9
03 1.6 20.3
04 10
0
8.3 -0.2
15.8
14
Dimensions [mm]
Dimension
Pins
Terminal
Part No.
Component layout
17 18 Weight
19 22
PCB plug-in base
20.3 x 15.8 x 8.3 mm
axial
84-920
PCB
5
31
0.003 kg
The component layouts you will find from page 803
41
Cable gland, IP 68
44 51
Additional Information • With traction relief
56 57
Product attribute
Thread
Material
Colour
Part No.
61
Weight
70
Cable gland
Clamping range Ø 4 ... 10 mm, thread length 8 mm
M16 x 1.5
Plastic
grey
61-9481.6
0.007 kg
Clamping range Ø 6 ... 12 mm, thread length 9 mm
M20 x 1.5
Plastic
grey
704.945.6
0.011 kg
71 82 84 92 95 96 97 99 ST
797
84 01
Accessories
Flat receptacle
02 03
Product attribute
Part No.
Weight
31-946
0.001 kg
Part No.
Weight
31-929
0.001 kg
04 10 14 17
Flat receptacle
2.8 x 0.5 mm plug-in terminal
Insulation sleeve
18 19
Product attribute
22 31 41
Insulation sleeve
for flat receptacle 2.8 mm
44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
798
Accessories
84
Stop request pushbutton
01
Housing pole mounting 35 mm
02
Additional Information
03
31
04 50
• Please note: The cut-out of the pole must read min. 22 mm and needs to be aligned with the switch
10
• Screws are not contained in the scope of supply Ø35 Ø 22.5
Ø 4.8
111
14
38.7
17 98 ±0.4
18
Dimensions [mm]
19 22
Material
Colour
Part No.
Weight
31 41
Housing pole mounting 35 mm
Plastic
84-9500.4
yellow RAL 1023
44
0.035 kg
traffic blue RAL 5017
84-9500.6A
0.035 kg
grey RAL 7016
84-9500.8
0.035 kg
51 56
Housing pole mounting 38 mm Additional Information
57
31
61 42.5
• Please note: The cut-out of the pole must read min. 22 mm and needs to be aligned with the switch
70
• Screws are not contained in the scope of supply 110.5
Ø38
82
Ø4.8
98 ±0.4
71
38
Ø 22.5
84
Dimensions [mm]
92 95 Material
Colour
Plastic
Part No.
Weight
96 97
Housing pole mounting 38 mm yellow RAL 1023
84-9600.4
0.030 kg
grey RAL 7016
84-9600.8
0.030 kg
99 ST
799
84 03
Additional Information • For housing, pole mounting 35 mm dia.
04
98 ±0.4
Ø 30
02
Adaptor reducing to 30 mm
Ø 4.8
01
Accessories
20.5
111
10 14
Dimensions [mm]
17 18 19
Material
Colour
Part No.
Weight
22 31
Adaptor reducing to 30 mm
Plastic
41 44 51
yellow RAL 1023
84-9700.4
0.024 kg
grey RAL 7016
84-9700.8
0.024 kg
Adaptor reducing to 25 mm Additional Information
57
Ø 4.8
56 98 ±0.4
Ø25
• For housing, pole mounting 35 mm dia.
20.5
111
61 70
Dimensions [mm]
71 82 Material
Colour
Part No.
Weight
84 92 95
Plastic
96 97 99 ST
800
Adaptor reducing to 25 mm yellow RAL 1023
84-9300.4
0.008 kg
grey RAL 7016
84-9300.8
0.008 kg
Accessories
84 01
Housing wall mounting Additional Information
02
31
03
31
• Please note: The cut-out of the pole must read min. 22 mm and needs to be aligned with the switch 110
• Screws are not contained in the scope of supply
36
04
Ø 22.5
Ø 4.8
10
98 ±0.4
14
Dimensions [mm]
17 18
Material
Colour
Part No.
Weight
19 22
Plastic
Housing wall mounting yellow RAL 1023
84-9800.4
0.024 kg
grey RAL 7016
84-9800.8
0.024 kg
31 41 44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
801
84
Accessories
01
Mounting
02
Mounting tool
03 04 10
Product attribute
14 17
Part No.
Weight
84-996
0.014 kg
84-997
0.027 kg
Mounting tool
for tightening or loosening the fixing nut, for emergency-stop and stop-switch
18 19
Mounting tool
for tightening or loosening of fixing nut, for Indicator and Pushbutton
22 31 41 44
Dismantling tool Additional Information • For actuator dismantling of switching element, illumination element and mounting flange
51 56
Part No.
Weight
57 61
84-918
70 71 82 84 92 95 96 97 99 ST
802
Combined dismantling tool 0.008 kg
Drawings
84 01
Drawings
02
23 24 21 22 X2+ X1- 12 11
Cable 11
white
12 X1_ X2+ 24 22 23 21
green grey
11 12 X1_ X2+
white green
11 12 24 22 23 21
white green
11 12
white
Terminals brown
1 NC + 1 NO 2 NC Illumination
yellow pink
11 / 12 + 23 / 24 11 / 12 + 21 / 22 _ X1 / X2+
12 11
03
X2+ X1-
04
22 21 24 23
Terminals brown
1 NC Illumination
yellow
10
11 / 12 _ X1 / X2+
14 Terminals
brown
1 NC + 1 NO 2 NC
yellow
1 NC
brown
11 / 12 + 23 / 24 11 / 12 + 21 / 22
17
Terminals
18
11 / 12
19 Component layout 1
Component layout 2
Single-LED
Bi-colour-LED
Drilling plan (element side)
Drilling plan (element side)
A Fixing holes for mounting flange (92-960.0) B Holes for LED C Holes for contact pins Pad max. Ø 2.5 mm Through-connection recommended
A Fixing holes for mounting flange (92-960.0) B Holes for Bi-colour LED: BA1 (green) + BA2 (yellow or red) = Anodes, BK = Cathode C Holes for contact pins Pad max. Ø 2.5 mm Through-connection recommended
22 31 41 44 51
A
A
C B
C
Ø 2.0
5.08
C
10.16
C
56
BA2 15.24
5.08
10.16
15.24
B
Ø 1.3
A
C
C
C
C
BA1 BK A
Ø 1.0 10.16
Ø2.0
57
Ø1.3 Ø1.0
61
10.16
12.7
12.7
15.24
15.24
70 71 82
Hyper mini Top-LED
84 92
Drilling plan (element side) A Fixing holes for mounting flange (84-960.0)
95 2.8
Ø 20.8 A
96
10.61
0.8
10.61
1
97 99
A Pads
Ø2.0
10.61
ST
10.61
Component layout 3
803
84
Drawings
01
Single-LED
Bi-colour-LED
02
Drilling plan (element side)
Drilling plan (element side)
03
A Fixing holes for mounting flange (92-960.0) B Holes for LED C Holes for centering pins
A Fixing holes for mounting flange (92-960.0) B Holes for Bi-colour LED: BA1 (green) + BA2 (yellow or red) = Anodes, BC = Cathode C Holes for centering pins
04
A
Ă˜ 1.0
A
17 18
6.35 10.16
15.24
15.24
22
41
Hyper mini Top-LED
Drilling plan (element side) A Fixing holes for mounting flange (84-960.0)
44 2.8
Ă˜ 20.8
51
A 10.61 10.61
1
56 57
A Pads 10.61
Ă˜ 2.0
61
Component layout 4
%SJMMJOH QMBO FMFNFOU TJEF
71
Š
84
97
r
Y ¹ Š 1PTJUJPOJOH IPMF Š
99 ST
Š
92
96
1VTICVUUPO BOUJ UXJTU EFWJDF Š
1VTICVUUPO DFOUSF
Š
82
95
10.61
70
0.8
Š
Component layout 5
804
YÂą 1JOT GPS DPOUBDU -&% 5ISPVHI DPOOFDUJPO SFDPNNFOEFE
Ă˜1.0 BC
10.16
19
31
BA1
C
A
6.35
Ă˜2.0
C
6.35
B
15.24
Ă˜ 2.0
C
10.16
BA2
C
6.35
10.16
14
15.24
10
A B
Technical data
84 01
Emergency-stop Switching system The double-break switching system can be supplied for the following switching functions: 1 Normally closed, 2 Normally closed, 1 Normally closed + 1 Normally open. The Normally closed contacts have forced opening according to EN IEC 60947-5-1 Material Connection cable Polyvinylchloride (PVC), operating temperature up to +65 °C Mushroom-head cap Polybutylenterephthalate (PBT), as per UL 94 V0 (red items) Actuator housing Polyamide (PA 66), as per UL 94 V0, Flat ribbon cable-cover Polyamide (PA 6.6), as per UL 94 V0
Rated Operational Voltage Ue 250 VAC, as per EN IEC 60947-1
02 03
Rated Insulation Voltage Ui 250 V, as per EN IEC 60947-1
04
Rated Impulse Withstand Voltage Uimp 2.5 kV, as per EN IEC 60947-1
10
Contact resistance New state ≤ 50 mΩ, as per DIN IEC 60512-2-3
14
Isolation resistance > 1011 Ω between the opend contats at 500 VDC, as per DIN IEC 60512-3-1
17 18
Electrical life ≥ 50 000 cycles of operations (inductive cosφ 0.4), as per EN IEC 60947-5-1 Voltage Current
120 VAC 3A
240 VAC 1.5 A
19 22
125 VDC 250 VDC 0.55 A 0.27 A
Material of contact Silver alloy gold plated
Reduced load ≥ 50 000 cycles of operations (resistive)
Mechanical characteristics
Voltage Current
Front panel thickness Standard 1 … 4 mm with EMERGENCY-STOP protective shroud Part No. 84-902 1 … 3 mm
Conventional free air thermal current Ith 5 A, as per EN IEC 60947-5-1 the maximum current in continuous operation and at ambient temperature must not exceed the quoted maximum values.
Mounting cut-outs Ø 22.5 mm as per EN IEC 60947-5-1 with anti-twist device
Switch rating Switch rating AC with silver contact (gold plated), service category AC-15, as per EN IEC 60947-5-1
Terminals Soldering terminals 2.8 x 0.5 mm (solderable), CuSn6 tin-plated Flat ribbon cable 2-, 4-, or 6-poles 0.35 mm² (AWG 22)
Voltage Current
1 VAC/DC 100 mA
120 VAC 3A
31 41
42 VAC/DC 200 mA
44 51
Switch rating DC for silver contact (gold plated), service category DC-13, as per EN IEC 60947-5-1
Actuating force 22 N ±4 N
Voltage (VDC) 12 VDC 24 VDC 48 VDC 60 VDC 125 VDC 250 VDC Current Plug 5 A 4A 2.1 A 1.7 A 0.55 A 0.27 A Current Cable 3 A 3A 2.1 A 1.7 A 0.55 A 0.27 A
Mechanical lifetime ≥ 50 000 cycles of operations Electrical characteristics Standards The devices comply with: EN IEC 60947-5-1, EN IEC 60947-5-5 (EMERGENCY-STOP), DIN EN ISO 13850, EN IEC 60204 Illumination LED red with pole reversal, constant current source Operation Voltage 5 VDC … 30 VDC Current consumption 9.7 mA … 12.4 mA
70 71 82 84
Recommended minimum operational data Silver contacts (gold plated) Voltage Current
57 61
240 VAC 1.5 A
Tightening torque Fixing nut 80 Ncm
Actuating travel approx. 4 mm to release the internal operation part
56
92
1 VAC/DC 1 mA
95
Electric strength 500 VAC, 50 Hz, 1 min, as per DIN IEC 60512-2
96
Rated conditional short-circuit current 1000 A, type of short-circuit unit 6 A gG, as per EN IEC 60947-5-1
97 99
Protection class Class II, as per EN IEC 60947-5
ST
805
84
Technical data
01 02
Overvoltage category II, as per EN IEC 60947-1
03
Degree of pollution 3, as per EN IEC 60947-1
Climate resistance Damp heat, cyclic 96 hours, +25 °C/97 %, +55 °C/93 % relative humidity, as per EN IEC 60068-2-30
Environmental conditions
Damp heat, steady 56 days, +40 °C/93 % relative humidity, as per EN IEC 60068-2-78
Storage temperature -25 °C … +80 °C
Dry heat 96 hours, +70 °C, as per EN IEC 60068-2-2
17
Operating temperature -25 °C … +65 °C
Low temperature 96 hours, -40 °C, as per EN IEC 60068-2-1
18
Front protection IP 65, as per EN IEC 60529
Saline mist 96 Stunden, +35 °C in chemical solution NaCl, as per EN IEC 60068-2-11
04 10 14
19 22 31 41 44
Shock resistance (semi-sinusoidal) max. 150 m/s², pulse width 11 ms, 3-axis, as per EN IEC 60068-2-27 Vibration resistance (sinusoidal) max. 50 m/s² at 10 Hz … 500 Hz, 10 cycles, 3-axis, as per EN IEC 60068-2-6
Approvals Approbations CB (IEC 60947) UL NFF Declaration of conformity CE
51 56 57 61
Switching element illuminated pushbutton Switching system Short-travel switching system with 2 independent contact points and tactile operation. Guarantees reliable switching even of very light loads. Fitted with 1 normally open contact.
70 71 82 84 92 95
Material Connection cable Polyvinylchloride (PVC), short-time heat-resistant up to 105 °C Material of contact Silver alloy gold plated Switching element Thermoplastic polyester (PET, PBT), as per UL 94 V0 and Polyacetale (POM), as per UL 94 HB
96
Mechanical characteristics
97
Terminals Plug-in terminals 2.8 x 0.8 mm (solderable) Flat ribbon cable 0.5 mm² PCB terminal
99 ST
Actuating force 4.0 N ±0.2 N (measured at the lens)
806
Actuating travel ~0.5 mm Rebound time ≤ 1 ms Resistance to heat of soldering 260 °C, 5 s (PCB assembly) 350 °C, 10 s (when using a soldering iron) as per EN IEC 60068-2-20 Mechanical lifetime ≥ 1 million cycles of operations Electrical characteristics Illumination Single-Chip LED, green, orange, red, yellow, white and blue Operation Voltage 12 VDC Current consumption 10 mA
24 VDC 10 mA
Contact resistance Starting value (initial) ≤ 100 mΩ, as per DIN IEC 60512-2 Isolation resistance ≥ 1 GΩ between all terminals at 100 VDC, as per DIN IEC 60512-3-1
Technical data
84 01
Environmental conditions
Electrical life as per EN IEC 60512-5 5 million cycles of operation 5 million cycles of operation 2 million cycles of operation 2 million cycles of operation 300 000 cycles of operation 250 000 cycles of operation 1 million cycles of operation 1 million cycles of operation 1 million cycles of operation 5 million cycles of operation 1.5 million cycles of operation 100 000 cycles of operation 500 000 cycles of operation 300 000 cycles of operation 100 000 cycles of operation
24 VAC, 50 mA at 480 Ω 24 VAC, 100 mA at 240 Ω 42 VAC, 50 mA at 840 Ω 42 VAC, 100 mA at 420 Ω 42 VAC, 100 mA at cosφ 0.4 42 VAC, 200 mA at cosφ 0.395 12 VDC, 250 mA at 48 Ω 24 VDC, 50 mA at 480 Ω 24 VDC, 100 mA at 240 Ω 42 VDC, 25 mA at 1680 Ω 42 VDC, 50 mA at 840 Ω 42 VDC, 100 mA at 420 Ω 24 VDC, 200 mA at L/R = 30 ms 42 VDC, 100 mA at L/R = 30 ms 42 VDC, 200 mA at L/R = 30 ms
Switch rating Voltage 50 mVAC/DC … 42 VAC/DC Current 10 uA … 100 mA Power max. 2 W
02
Storage temperature -40 °C … +85 °C
03
Operating temperature -25 °C … +70 °C
04
Protection degree Back protection: IP 40, standard version IP 67, fully sealed version, with mounted actuator only.
10 14 17
Shock resistance (semi-sinusoidal) max. 100 m/s², pulse width 11 ms, 3-axis, as per EN IEC 60068-2-27
18 19
Vibration resistance (sinusoidal) max. 50 m/s² at 10 Hz … 500 Hz, 10 cycles, 3-axis, as per EN IEC 60068-2-6
22 31
Electric strength 500 VAC, 50 Hz, 1 min, as per DIN IEC 60512-2
41 44
Actuator Material
Environmental conditions
Lens Polycarbonate (PC), as per UL 94 V2 or Aluminium anodised
Storage temperature -40 °C … +85 °C
Actuator housing Polyetherimid (PEI), as per UL 94 V0 or Aluminium anodised
Operating temperature -25 °C … +70 °C
Mechanical characteristics
Front protection IP 67 and IP40, as per EN IEC 60529
Mounting cut-outs Ø 22.5 mm and Ø 30.5 mm Tightening torque Fixing nut max. 80 Ncm
Damp heat, state 56 days, +40 °C/93 % relative humidity, as per EN IEC 60068-2-78
Actuating travel Total switching travel 1.2 mm
Rapid change of temperature 100 cycles, -40 °C … +80 °C, as per EN IEC 60068-2-14
Mechanical lifetime ≥ 1 million cycles of operations
Approvals
Electrostatic breakdown value Plastic case ≥ 15 kV Aluminium case ≥ 5 kV as per IEC 61000-4-2, mounted in plastic front panel
56 57 61 70
Climate resistance Damp heat, cyclic 96 hours, +25 °C/97 %, +55 °C/93 % relative humidity, as per EN IEC 60068-2-30
Actuating force 4.0 N ±0.2 N (measured at the lens)
Electrical characteristics
51
71 82 84 92 95 96 97
Approbations EBC NFF
99
Declaration of conformity CE TSI/PRM
ST
807
84 01 02 03 04 10
Technical data
Lens plastic with symbols Chemical and mechanical tests 1. Wipe resistance according to EN 61058-1 section 8.9 (Petrol/gasoline, distilled water, diluted alcohol) 2. Graffiti-Killer Test 3. Railway cleaning agents (Walo) 4. Damp/dry heat durability 5. UV test according to EN 60068-2-5 / 56 days 6. Mechanical life time 2 Mio. Operations (abrasive test)
14 17
EAO reserves the right to alter specifications without further notice.
18 19 22 31 41 44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
808
Application guidelines
84 01
Suppressor circuits When switching inductive loads such as relays, DC motors, and DC solenoids, it is always important to absorb surges (e. g. with a diode) to protect the contacts. When these inductive loads are switched off, a counter emf can severely damage switch contacts and greatly shorten lifetime. Fig. 1 shows an inductive load with a free-wheeling diode connected in parallel. This free-wheeling diode provides a path for the inductor current to flow when the current is interrupted by the switch. Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric breakdown voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude even when nominal circuit voltages are low (e. g. 12 VDC) see Fig. 2.
The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the voltage driving the inductive load. The DC blocking voltage (VR) of the free-wheeling diode can be found in the datasheet of a diode. The forward current should be equal or greater than the maximum current flowing through the load. To get an efficient protection, the free-wheeling diode must be connected as close as possible to the inductive load!
ON
Free-wheeling diode
Inductive load
10
18 19 22
OFF
31
0
+ _
04
17
Switch
VDC
03
14
Counter EMF over load without free-wheeling diode Fig. 2
Switching with inductive load Fig. 1
02
Several hundred to several thousend volts
41
di __ e = L dt
44 51
Arrangement mounting flange for switching- and illumination element, PCB mounting
56 57 25...30
61
max. 60
70 71 82 max. 60
84
25...30
The arrangement of the mounting flanges and their number is determined by the size of the front panel or PCB. To ensure uniform, tactile switching, we recommend a layout of the flanges as per adjacent sketch. For large PCBs with several switching elements we recommend the following procedure: 1. Fit the actuator to the front panel. 2. Clip the mounting flange to the rear of the intended actuator. 3. Screw the PCB with the components soldered to it to the assembled mounting flange.
92
Dismantling mounting flange The tool Part No. 84-998 must be used for removing the mounting flange from the actuator. Before removing the flange, the PCB fixing srews must be loosened.
95 96 97 99 ST
This arrangement applies to PCBs 1.6 mm thick.
809
84 01 02 03 04 10 14 17 18 19 22 31 41 44 51 56 57 61 70 71 82 84 92 95 96 97 99 ST
Index
Index from Part No. Part No.
Page
10-2602.3202L....... 793 10-2602.3203L....... 793 10-2602.3204L....... 793 10-2602.3205L....... 793 10-2602.3206L....... 793 10-2602.3209L....... 793 10-2603.308AL....... 793 10-2603.308CL....... 793 31-929.................... 791 31-929.................... 798 31-946.................... 798 61-9453.0............... 784 61-9481.6............... 797 61-9707.7............... 778 61-9980.0............... 783 704.945.1............... 796 704.945.2............... 796 704.945.3............... 796 704.945.4............... 796 704.945.5............... 796 704.945.6............... 797 704.963.0............... 794 704.963.1............... 794 704.963.2............... 794 704.963.3............... 794 704.963.5............... 794 704.963.6............... 794 704.963.7............... 794 704.963.8............... 794 704.964.8............... 784 704.968.0............... 784 704.968.1............... 784 84-0080.7............... 772 84-0090.7............... 768 84-0090.7............... 769 84-0100.0............... 758 84-0100.0............... 759 84-0200.7............... 758 84-0200.7............... 759 84-1081.7............... 773 84-1091.7............... 770 84-1091.7............... 771 84-1101.0............... 760 84-1101.0............... 762 84-1101.0............... 765 84-1101.0............... 767 84-1201.0............... 760 84-1201.0............... 762 84-1201.0............... 765 84-1201.0............... 767 84-1201.2............... 760 84-1201.2............... 762 84-1201.2............... 765 84-1201.2............... 767 84-1201.4............... 761 84-1201.4............... 762 84-1201.4............... 765 84-1201.4............... 767 84-1201.5............... 761 84-1201.5............... 762 84-1201.5............... 765 84-1201.5............... 767 84-1201.6............... 761 84-1201.6............... 762 84-1201.6............... 765 84-1201.6............... 767 84-1201.7............... 761 84-1201.7............... 762 84-1201.7............... 765 84-1201.7............... 767 84-1221.7............... 760 84-1221.7............... 762 84-1221.7............... 764 84-1221.7............... 766 84-2101.0............... 760 84-2101.0............... 762 84-2101.0............... 765
810
Part No.
Page
84-2101.0............... 767 84-3100.0............... 758 84-3100.0............... 759 84-5020.0020......... 775 84-5020.0040......... 774 84-5021.2B20......... 775 84-5021.2B40......... 774 84-5030.0020......... 775 84-5030.0040......... 774 84-5031.2B20......... 775 84-5031.2B40......... 774 84-5040.0020......... 775 84-5040.0040......... 774 84-5041.2B20......... 775 84-5041.2B40......... 774 84-5120.0020......... 775 84-5120.0040......... 774 84-5121.2B20......... 775 84-5121.2B40......... 774 84-5130.0020......... 775 84-5130.0040......... 774 84-5131.2B20......... 775 84-5131.2B40......... 774 84-5140.0020......... 775 84-5140.0040......... 774 84-5141.2B20......... 775 84-5141.2B40......... 774 84-6820.0020......... 777 84-6820.0040......... 776 84-6821.2B20......... 777 84-6821.2B40......... 776 84-6830.0020......... 777 84-6830.0040......... 776 84-6831.2B20......... 777 84-6831.2B40......... 776 84-6840.0020......... 777 84-6840.0040......... 776 84-6841.2B20......... 777 84-6841.2B40......... 776 84-7111.200........... 778 84-7111.201........... 779 84-7111.202........... 779 84-7111.203........... 779 84-7111.300........... 778 84-7111.301........... 779 84-7111.400........... 778 84-7111.401........... 779 84-7111.500........... 778 84-7111.501........... 779 84-7111.502........... 779 84-7111.503........... 779 84-7111.600........... 778 84-7111.601........... 779 84-7111.602........... 779 84-7111.603........... 779 84-7111.700........... 778 84-7111.701........... 779 84-7111.702........... 779 84-7111.703........... 779 84-7114.600A......... 783 84-7115.200........... 778 84-7115.300........... 778 84-7115.400........... 778 84-7115.500........... 778 84-7115.600........... 778 84-7115.700........... 778 84-7121.000........... 778 84-7121.800........... 778 84-7124.000A......... 783 84-7124.200A......... 783 84-7124.400A......... 783 84-7124.500A......... 783 84-7124.600A......... 783 84-7125.000........... 778 84-7125.800........... 778 84-7201.000........... 779 84-7201.200........... 779
Part No.
Page
84-7201.400........... 780 84-7201.500........... 780 84-7201.600........... 780 84-7201.800........... 780 84-7202.000........... 780 84-7202.000A......... 780 84-7202.200........... 780 84-7202.200A......... 780 84-7202.400........... 780 84-7202.400A......... 780 84-7202.500........... 780 84-7202.500B......... 780 84-7202.600........... 780 84-7202.600A......... 780 84-7202.800........... 780 84-7202.800A......... 780 84-7205.000........... 780 84-7205.000A......... 780 84-7205.200........... 780 84-7205.200A......... 780 84-7205.400........... 780 84-7205.400A......... 780 84-7205.500........... 780 84-7205.500A......... 780 84-7205.600........... 780 84-7205.600A......... 780 84-7205.800........... 780 84-7205.800A......... 780 84-7205.804A......... 781 84-7205.805A......... 781 84-7205.806A......... 781 84-7205.808A......... 781 84-7211.000........... 782 84-7211.200........... 782 84-7211.400........... 782 84-7211.500........... 782 84-7211.600........... 782 84-7211.800........... 782 84-7215.000........... 782 84-7215.200........... 782 84-7215.400........... 782 84-7215.500........... 782 84-7215.600........... 782 84-7215.800........... 782 84-8001.2320......... 785 84-8001.2340......... 785 84-8001.2620......... 785 84-8001.2640......... 785 84-8001.3320......... 785 84-8001.3340......... 785 84-8001.3620......... 785 84-8001.3640......... 785 84-8001.4320......... 785 84-8001.4340......... 785 84-8001.4620......... 785 84-8001.4640......... 785 84-8001.5320......... 785 84-8001.5340......... 785 84-8001.5620......... 785 84-8001.5640......... 785 84-8001.6320......... 785 84-8001.6340......... 785 84-8001.6620......... 785 84-8001.6640......... 785 84-8001.9320......... 785 84-8001.9340......... 785 84-8001.9620......... 785 84-8001.9640......... 785 84-8005.7620......... 786 84-8005.7640......... 786 84-8005.8620......... 786 84-8005.8640......... 786 84-8510.0020......... 789 84-8510.0040......... 789 84-8511.2320......... 787 84-8511.2340......... 787 84-8511.2620......... 787
Part No.
Page
84-8511.2640......... 787 84-8511.3320......... 787 84-8511.3340......... 787 84-8511.3620......... 787 84-8511.3640......... 787 84-8511.4320......... 787 84-8511.4340......... 787 84-8511.4620......... 787 84-8511.4640......... 787 84-8511.5320......... 787 84-8511.5340......... 787 84-8511.5620......... 787 84-8511.5640......... 787 84-8511.6320......... 787 84-8511.6340......... 787 84-8511.6620......... 787 84-8511.6640......... 787 84-8511.9320......... 787 84-8511.9340......... 787 84-8511.9620......... 787 84-8511.9640......... 787 84-8515.7640......... 788 84-8515.8640......... 788 84-900.................... 792 84-902.................... 794 84-902A.................. 794 84-902B.................. 795 84-902D.................. 795 84-905.................... 795 84-908.................... 795 84-909.................... 795 84-910.................... 795 84-9103.7............... 783 84-918.................... 802 84-920.................... 797 84-9300.4............... 800 84-9300.8............... 800 84-9420.................. 791 84-9500.4............... 799 84-9500.6A............. 799 84-9500.8............... 799 84-960.0................. 791 84-9600.4............... 799 84-9600.8............... 799 84-9700.4............... 800 84-9700.8............... 800 84-9800.4............... 801 84-9800.8............... 801 84-996.................... 802 84-997.................... 802 92-800.042............. 790 92-851.342............. 790 92-960.0................. 791