Butt Contact Pushbutton Switches
Series 30
Sealed, Front Panel Mounting FEATURES
Pushbutton Switches
• • • • • •
Threaded bushing Choice of 6 button colors SPST (momentary contact) Gold plated contacts Strong, lightweight aluminum housing Sealed against dust and moisture to IP67 (to IP67 with silicone boot*)
Dimensions in inches (and millimeters) RATING .298 [ 7,58 ]
.220 [ 5,59 ] .050 [ 1,27 ]
.182 [ 4,62 ] Ø .530 ±.003 [ 13,46 ] .503 [ 12,78 ] RECOMMENDED PANEL CUTOUT
Ø.522
[ 13,26 ]
.510 ±.003 [ 12,95 ]
.110 [ 2,79 ]
1/2-32 UNEF THREADS
Ø.689 [ 17,51 ]
Cycles: 500,000 actuations Operating Temperature: -40ºC to +80ºC Shock: 100 G's/6 milliseconds Travel: .090 nominal Travel Before Make: .035 nominal Rating at 24 VDC: 150 milliamps Voltage Breakdown: 1000 Vac Contact Resistance: 25 Megaohms max (initial) Insulation Resistance: 1,000 Megaohms minimum
.780 REF. [ 19,81 ]
MATERIAL
Housing: Aluminum, black chrome finish Button, Base, and Plunger: Nylon, 45% glass-filled Terminal: Brass, gold-plated over nickel Shorting Bar: Brass, gold-plated over nickel Internal Seal: Silicone rubber O-ring panel Seal: Silicone Spring: Tinned music wire Hex Nut: 1/2-32, Brass with Nickel Plating, P/N 635201 Lockwasher: Internal,1/2 dia. , Steel with Zinc plating, P/N 635401
Cable Options
* Switch meets IP67 without boot if not actuated during immersion
CIRCUITRY: SPST N.O.
ORDERING INFORMATION
30-201B-1S
Series Threaded Bushing Strain Relief: Blank = shrink tubing, S = strain relief Connection: Blank = terminals, E = epoxy rear seal 1 = 6" leads, 2 = 12" leads, 3 = 36" leads Silicone Boot: Blank = no boot, B = black boot, C = clear boot Cap Color: 0 = black, 1 = red, 2 = green 3 = yellow, 4 = orange, 5 = blue
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
pictured with clear silicone boot
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Butt Contact Pushbutton Switches
SERIES 30 Snap-in Panel Mounting FEATURES • Convenient Snap-in Panel Mounting • Choice of 6 Button Colors • SPST (Momentary Contact) • Gold Plated Contacts • Sealed • Butt Contact System
DIMENSIONS
In inches (and millimeters) Pushbutton Switches
Ø.690
.240
.160
Ø.596 / .602
YYWW
GH .540
.200 RECOMMENDED PANEL CUT-OUT SCALE: 1 TO 1
SCALE 2.000
PANEL THICKNESS WITH "O" RING: .098-.106 PANEL THICKNESS WITHOUT "O" RING: .140-.144
(Unless otherwise noted, standard tolerances are +/- .020)
MATERIAL • Button, Housing, Base and Plunger: Nylon, 45% Glass-filled • Terminal: Brass, gold-plated over nickel • Shorting Bar: Brass, gold-plated over nickel • Internal Seal: Silicone Rubber • O-ring Seal: Silicone • Spring: Tinned music wire • Travel: .090 Nominal • Travel Before Make: .035 Nominal
RATINGS • Cycles: 500,000 Actuations • Operating Temperature: -40o C to +80o C • Shock: 100 G’s/ 6 Milliseconds • Rating at 24 VDC: 150 Milliamps • Voltage Breakdown: 1000 Vac between mutually insulated parts • Contact Resistance: 25 megaohms max on new switch • Insulation: 1,000 megaohms minimum
ORDERING INFORMATION
CIRCUITRY
Part Number
Description
30-100 30-101 30-102 30-103 30-104 30-105
Black Red Green Yellow Orange Blue
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
SPST N.O. SPST N.O.
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Pushbutton 49