Rebar Threader
The Rebar Threader is designed for small children to play with. You will need very small tyres along with 12mm rebar and metal paint. You will need to cement the ends of the threader into the ground. Make sure you have at least 1.5 metres of space around the Rebar Threader.
Per Rebar Threader motorbike tyres 12mm round bar
Amount 1 20ft
How to build 1. Bend the rebar into a random wobbly shape but leave the ends straight so it can stand up. Make sure that it is not too tall as it will not be very strong. 2. Paint the rebar. 3. Cut the sidewalls off the motorbike tyre on both sides. Cut out a section and make a loop with the tyre. Bolt this loop together, making sure the bolts don’t stick out too far. 4. Slip these tyre loops over the rebar. 5. Dig holes for the rebar to go into the ground. Pour in some cement, put in the rebar and fill up with cement.
1
Colour Scheme Paint the tyres different colours. Paint the bar two colours striped. Foundations
5ft
X marks the centre of the foundation and where the leg should go. 30” deep
18” 18”
2