PIPE FUSION EQUIPMENT

McElroy pipe fusion equipment

2020 McElroy pipe fusion equipment pipe fusion equipment, consisting of the following:

(1) Sidewinder model A SW00114, serial C99595, chain type, with transponder port, purchase new, (One) multi-MC heater 2-inch, model 252601, both units were purchased new condition. The suggested retail price is 3200.00 lot 53

McElroy pipe fusion equipment

(4) McElroy pipe fusion units, sidewinders, with heaters, this entire offering sales as one unit. Lot 56

Ametek instrument crystal pressure

2021 Ametek instrument crystal pressure Nvision reference recorder, serial 109094 300PSI pressure module, serial number 110992 is a RT100 temperature module, pressure range 0-300PSI, out of calibration, purchased new, new condition. Suggest new retail price is 5800.00. Lot 58

Laboratory Conditions Laboratory ambient conditions throughout this calibration Temperature 19 to 23° C

Humidity 20 to 60% RH

Definitions

Temperature Measured temperature of Device Under Test (DUT) during data collection

Reference Reading True value according to our reference standards

Indicated Reading Displayed reading from test unit

Condition Pass or Fail

Difference Indicated reading minus reference reading

Relative Difference (Difference / reference reading) x 100

Allowable Tolerance ± according to manufacturer’s specifications

Pressure Medium Nitrogen

Traceable Reference Standards

Certificate of Calibration

Calibrations comply with ISO/IEC 17025:2017 and ANSI NCSL Z540-1-1994

Traceability Statement

Reference Standards used in this calibration are traceable to the National Institute of Standards and Technology of the United States (NIST) or other NMI

System Expanded Uncertainty System expanded uncertainty evaluation includes the calibration reference used and device under test and is calculated in accordance with ISO "Guide to the Expression of Uncertainty in Measurement" (GUM) The uncer tainties reported represent expanded uncertainties using a coverage factor (k) to approximate a percentage (%) confidence level

Decision Rule

In Tolerance or Pass conditions are based on test results falling within specified limits with no reduction by the uncertainty of the measurement The results contained herein relate only to the item calibrated Test methods defined by COI-054

Coverage Factor (k) Confidence Level (%)

Measured temperature of Device Under Test (DUT) during data collection Reference Reading True value according to our reference standards

Reading Displayed reading from test unit

Pass or Fail

Indicated reading minus reference reading

Difference (Difference / reference reading) x 100

Tolerance ± according to manufacturer’s specifications Traceable Reference Standards

Certificate of Calibration

Calibrations comply with ISO/IEC 17025:2017 and ANSI NCSL Z540-1-1994

Traceability Statement

Reference Standards used in this calibration are traceable to the National Institute of Standards and Technology of the United States (NIST) or other NMI

System Expanded Uncertainty

System expanded uncertainty evaluation includes the calibration reference used and device under test and is calculated in accordance with ISO "Guide to the Expression of Uncertainty in Measurement" (GUM) The uncer tainties reported represent expanded uncertainties using a coverage factor (k) to approximate a percentage (%) confidence

Decision Rule

In Tolerance or Pass conditions are based on test results falling within specified limits with no reduction by the uncertainty of the measurement The results contained herein relate only to the item calibrated Test methods defined by COI-054

Sensit Gold G2

2021 Sensit Gold G2 technologies gas detection instrument, LEL/TC – CO2 - 02 – H2S, SN 6709, gas type methane, this unit was purchased new. Lot 57