3 Wishes - 2024 Free Patterns by EE Schenck Company

By Connie Haley

Quilt Size: 54” x 54”

cm x 137.16cm)

Quilt Design by Matthew Pridemore

Farmtastic

Finished Quilt Size: 54” x 54” (137.16 cm x 137.16 cm)

Fabrics in the Back to the Farm Collection

Tossed Animals 23043-BLU-CTN-D

Farm Tractors 23044-GRN-CTN-D

Chirpy Chicks 23045-WHT-CTN-D

Packed Barns 23046-RED-CTN-D

Farm Sunrise 23047-YLW-CTN-D

Black Sheep 23048-GRY-CTN-D

Floral Farm 23049-TRQ-CTN-D

Barnyard Friends 36in Panel 23050-PNL-CTN-D

Back to the Farm 36in Panel 23051-PNL-CTN-D

Solid White

Farmtastic

Materials

1 panel

Back to the Farm 36in Panel (A)

23051-PNL-CTN-D

⅞ yard (0.80m) Floral Farm (B)*

23049-TRQ-CTN-D

½ yard (0.46m) Solid White (C)

⅓ yard (0.31m) Chirpy Chicks (D)

23045-WHT-CTN-D

½ yard (0.46m) Tossed Animals (E)

23043-BLU-CTN-D

½ yard (0.46m) Packed Barns (F)

23046-RED-CTN-D

½ yard (0.46m) Farm Tractors (G)

23044-GRN-CTN-D

½ yard (0.46m) Black Sheep (H)

23048-GRY-CTN-D

3 ½ yards (3.20m) Chirpy Chicks (Backing)

23045-WHT-CTN-D

*Includes binding

Cutting Instructions

Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Back to the Farm 36in Panel (A):

• Fussy cut (1) 33 ½” square centered on the blocks.

From the Floral Farm (B), cut:

• (2) 2 ½” x 33 ½” WOF strips.

• (2) 2 ½” x 37 ½” WOF strips.

• (6) 2 ½” x WOF strips for the binding.

From the Solid White (C), cut:

• (2) 1 ¼” x 36 ½” WOF strips.

• (2) 1 ¼” x 38” WOF strips.

• (2) 1 ¼” x 41” WOF strips.

• (2) 1 ¼” x 42 ½” WOF strips, piece as needed.

From the Chirpy Chicks (D), cut:

• (2) 2” x 38” WOF strips.

• (2) 2” x 41” WOF strips.

From the Tossed Animals (E), cut:

• (2) 6 ½” x WOF strips. Sub-cut (8) 6 ½” squares.

From the Packed Barns (F), cut:

• (2) 6 ½” x WOF strips. Sub-cut (8) 6 ½” squares.

From the Farm Tractors (G), cut:

• (2) 6 ½” x WOF strips. Sub-cut (8) 6 ½” squares.

From the Black Sheep (H), cut:

• (2) 6 ½” x WOF strips. Sub-cut (8) 6 ½” squares.

From the Chirpy Chicks (Backing), cut:

• (2) 62” x WOF strips for the backing. Sew the strips together and trim to make the 62” x 62” back.

Block Assembly

Note: The arrows in figures represent the fabric print direction. Pay attention to the fabric and unit orientations when assembling the various components. Use a ¼” seam allowance with right sides together (RST) unless otherwise noted.

1. Sew (1) 2 ½” x 33 ½” Fabric B strip to each side of (1) 33 ½” Fabric A square. Sew (1) 2 ½” x 37 ½” Fabric B strip to the top and bottom of the Fabric A square to make the Center Block (Fig. 1). Trim the block to measure 36 ½” x 36 ½”.

Center Block

Trim block to measure 36 ½” x 36 ½” AFTER adding Fabric B borders

2. Sew together (1) 6 ½” Fabric H square, (1) 6 ½” Fabric G square, (1) 6 ½” Fabric F square, (1) 6 ½”

Fabric E square, (1) 6 ½” Fabric H square, (1) 6 ½” Fabric G square and (1) 6 ½” Fabric F square, in that order from top to bottom, to make the 6 ½” x 42 ½” Left Side Border (Fig. 2).

3.Sew together (1) 6 ½” Fabric F square, (1) 6 ½” Fabric G square, (1) 6 ½” Fabric H square, (1) 6 ½”

Fabric E square, (1) 6 ½” Fabric F square, (1) 6 ½” Fabric G square and (1) 6 ½” Fabric H square, in that order from top to bottom, to make the 6 ½” x 42 ½” Right Side Border (Fig. 3).

Fig. 1

Fig. 2

Farmtastic Page 4

4. Sew together (1) 6 ½” Fabric E square, (1) 6 ½” Fabric F square, (1) 6 ½” Fabric G square, (1) 6 ½” Fabric H square, (1) 6 ½” Fabric E square, (1) 6 ½” Fabric F square, (1) 6 ½” Fabric G square, (1) 6 ½” Fabric H square and (1) 6 ½” Fabric E square, in that order from left to right, to make the 54 ½” x 6 ½” Top Border (Fig. 4).

5. Sew together (1) 6 ½” Fabric E square, (1) 6 ½” Fabric H square, (1) 6 ½” Fabric G square, (1) 6 ½” Fabric F square, (1) 6 ½” Fabric E square, (1) 6 ½” Fabric H square, (1) 6 ½” Fabric G square, (1) 6 ½” Fabric F square and (1) 6 ½” Fabric E square, in that order from left to right, to make the 54 ½” x 6 ½” Bottom Border (Fig. 5).

Quilt Top Assembly (Follow the Quilt Layout while assembling the quilt top.)

6. Sew (1) 1 ¼” x 36 ½” Fabric C strip to each side of the Center Block. Sew (1) 1 ¼” x 38” Fabric C strip to the top and bottom of the Center Block.

7. Sew (1) 2” x 38” Fabric D strip to each side of the Center Block. Sew (1) 2” x 41” Fabric D strip to the top and bottom of the Center Block.

8. Sew (1) 1 ¼” x 41” Fabric C strip to each side of the Center Block. Sew (1) 1 ¼” x 42 ½” Fabric C strip to the top and bottom of the Center Block.

9. Sew the Left Side Border and Right Side Border to the left and to the right sides of the Center Block. Sew the Top Border and Bottom Border to the top and to the bottom of the Center Block to make the quilt top.

10. Layer and quilt as desired.

11. Sew the (6) 2 ½” x WOF Fabric B strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

Fig. 5

12. Bind as desired.

Every effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check www.3wishesfabric.com for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. Finally, all free projects are intended to remain free to you and are not for resale

Fig. 4

By Connie Haley

Barnyard Friends

Quilt Size: 64” x 72”

cm x 182.88 cm)

Quilt Design by Matthew Pridemore

Barnyard Friends

Finished Quilt Size: 64” x 72” (162.56 cm x 182.88 cm)

Fabrics in the Back to the Farm Collection

Tossed Animals 23043-BLU-CTN-D

Farm Tractors 23044-GRN-CTN-D

Chirpy Chicks 23045-WHT-CTN-D

Packed Barns 23046-RED-CTN-D

Farm Sunrise 23047-YLW-CTN-D

Black Sheep 23048-GRY-CTN-D

Floral Farm 23049-TRQ-CTN-D

Barnyard Friends 36in Panel 23050-PNL-CTN-D

Back to the Farm 36in Panel 23051-PNL-CTN-D

Solid White

Barnyard Friends

Materials

1 panel

Barnyard Friends 36in Panel (A)

23050-PNL-CTN-D

⅓ yard (0.31m) Farm Sunrise (B)

23047-YLW-CTN-D

⅜ yard (0.35m) Tossed Animals (C)

23043-BLU-CTN-D

1 ⅛ yards (1.03m) Solid White (D)

⅜ yard (0.35m) Farm Tractors (E)

23044-GRN-CTN-D

⅞ yard (0.80m) Black Sheep (F)

23048-GRY-CTN-D

⅝ yard (0.58m) Chirpy Chicks (G)

23045-WHT-CTN-D

1 ⅛ yards (1.03m) Floral Farm (H)*

23049-TRQ-CTN-D

⅝ yard (0.58m) Packed Barns (I)

23046-RED-CTN-D

4 yards (3.66m) Chirpy Chicks (Backing)

23045-WHT-CTN-D

*Includes binding

Cutting Instructions

Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Barnyard Friends 36in Panel (A):

• Fussy cut (1) 34 ½” x 40 ½” rectangle centered on the panel.

From the Farm Sunrise (B), cut:

• (2) 2” x 40 ½” WOF strips.

• (2) 3” x 37 ½” WOF strips.

From the Tossed Animals (C), cut:

• (1) 9 ½” x WOF strip. Sub-cut (4) 9 ½” squares.

From the Solid White (D), cut:

• (4) 1” x WOF strips. Sub-cut (16) 1” x 9 ½” strips.

• (4) 1” x WOF strips. Sub-cut (16) 1” x 10 ½” strips.

• (4) 1 ¼” x WOF strips. Sub-cut (8) 1 ¼” x 17 ½” strips.

• (3) 1 ¼” x WOF strips. Sub-cut (8) 1 ¼” x 13 ½” strips.

• (8) 2 ½” x WOF strips. Sub-cut (124) 2 ½” squares.

From the Farm Tractors (E), cut:

• (1) 9 ½” x WOF strip. Sub-cut (4) 9 ½” squares.

From the Black Sheep (F), cut:

• (1) 17 ½” x WOF strip. Sub-cut (4) 5 ½”x 17 ½” strips.

• (2) 5 ½” x WOF strips. Sub-cut (4) 5 ½”x 13 ½” strips.

From the Chirpy Chicks (G), cut:

• (4) 2 ¼” x WOF strips. Sub-cut (8) 2 ¼” x 17 ½” strips.

• (3) 2 ¼” x WOF strips. Sub-cut (8) 2 ¼” x 13 ½” strips.

From the Floral Farm (H), cut:

• (4) 4 ½”x WOF strips. Sub-cut (32) 4 ½”squares.

• (7) 2 ½” x WOF strips for the binding.

From the Packed Barns (I), cut:

• (4) 4 ½”x WOF strips. Sub-cut (32) 4 ½”squares.

From the Chirpy Chicks (Backing), cut:

• (2) 72” x WOF strips for the backing. Sew the strips together and trim to make the 72” x 80” back.

Block Assembly

1. Sew (1) 2” x 40 ½” Fabric B strip to each side of (1) 34 ½” x 40 ½” Fabric A rectangle. Sew (1) 3” x 37 ½” Fabric B strip to the top and bottom of the Fabric A rectangle to make the Center Block (Fig. 1). Trim the block to measure 36 ½” x 44 ½”.

Trim block to measure

36 ½” x 44 ½” AFTER adding Fabric B borders

Center Block B B

2. Sew (1) 1” x 9 ½” Fabric D strip to each side of (1) 9 ½” Fabric C square. Sew (1) 1” x 10 ½” Fabric D strip to the top and bottom of the Fabric C square to make (1) 10 ½” Block One square (Fig. 2). Repeat to make (4) Block One squares total.

Block One make 4

Fig. 1

Fig. 2

Barnyard Friends

3. Sew (1) 1” x 9 ½” Fabric D strip to each side of (1) 9 ½” Fabric E square. Sew (1) 1” x 10 ½” Fabric D strip to the top and bottom of the Fabric E square to make (1) 10 ½” Block Two square (Fig. 3). Repeat to make (4) Block Two squares total.

Two make 4

4. Sew (1) 1 ¼” x 17 ½” Fabric D strip to each side of (1) 5 ½” x 17 ½” Fabric F strip lengthwise. Sew (1) 2 ¼” x 17 ½” Fabric G strip to each side of the newly sewn strip lengthwise to make (1) 10 ½” x 17 ½” Block Three strip (Fig. 4). Repeat to make (4) Block Three strips total.

Block Three make 4

Fig. 4

5. Sew (1) 1 ¼” x 13 ½” Fabric D strip to the top and bottom of (1) 5 ½” x 13 ½” Fabric F strip lengthwise. Sew (1) 2 ¼” x 13 ½” Fabric G strip to the top and bottom of the newly sewn strip lengthwise to make (1) 13 ½” x 10 ½” Block Four strip (Fig. 4). Repeat to make (3) Block Four strips total.

Four make 4

6. Sew (1) Block Three strip to the top and bottom of (1) Block Two square to make (1) 10 ½” x 44 ½” Inner Side Border (Fig. 6). Repeat to make a second Inner Side Border.

Fig. 6

7. Sew (1) Block Four strip to each side of (1) Block Two square. Sew (1) Block One square to each end of the newly sewn strip to make the 56 ½” x 10 ½” Inner Top Border (Fig. 7). Repeat to make the Inner Bottom Border.

8. Place (1) 2 ½” Fabric D square on the top right corner of (1) 4 ½” Fabric I square, right sides together (Fig. 8). Sew across the diagonal of the smaller square from the upper left corner to the lower right corner (Fig. 8). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle ¼” away from the sewn seam (Fig. 9).

Fig. 9

Fig.

Barnyard Friends

9. Follow Figure 10 for the seam direction to add a 2 ½” Fabric D square to the bottom right corner of the Fabric I square to make (1) 4 ½” Block Five square (Fig. 11).

10. Repeat Steps 8-9 to make (8) Block Five squares total.

Fig. 10 Fig. 11

11. Repeat Steps 8-9 and refer to Figures 12-18 for fabric identification, placement orientation and seam direction to make the indicated number of 4 ½” block squares for Block Six through Block Twelve.

Six make 30

Seven make 8

Eight make 7

Fig. 12

Nine

Fig. 15 Fig. 13 Fig. 16 Fig. 14 Fig. 17 Fig. 18

12. Sew together (8) Block Five squares and (8) Block Six squares, alternating them from top to bottom, to make the 4 ½” x 64 ½” Outer Left Side Border (Fig. 19).

13. Sew together (8) Block Six squares and (8) Block Seven squares, alternating them from top to bottom, to make the 4 ½” x 64 ½” Outer Right Side Border (Fig. 20).

Fig. 19 Fig. 20

14. Sew together (7) Block Eight squares and (7) Block Six squares alternating them from left to right. Sew (1) Block Ten square to the left end of the newly sewn strip and (1) Block Eleven square to the right end of the newly sewn strip to make the 4 ½” x 64 ½” Outer Top Border (Fig. 21).

Fig. 21

15. Sew together (7) Block Six squares and (7) Block Nine squares alternating them from left to right. Sew (1) Block Twelve square to the left end of the newly sewn strip and (1) Block Ten square to the right end of the newly sewn strip to make the 4 ½” x 64 ½” Outer Bottom Border (Fig. 22).

Barnyard Friends Page 6

Quilt Top Assembly

(Follow the Quilt Layout while assembling the quilt top.)

16. Sew (1) Inner Side Border to each side of the Center Block. Sew the Inner Top Border and Inner Bottom Border to the top and to the bottom of the Center Block.

17. Sew the Outer Left Side Border and Outer Right Side Border to the left and to the right sides of the Center Block. Sew the Outer Top Border and Outer Bottom Border to the top and to the bottom of the Center Block to make the quilt top.

18. Layer and quilt as desired.

19. Sew the (7) 2 ½” x WOF Fabric H strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

20. Bind as desired.

Center Block

www.3wishesfabric.com

Quilt Layout

By MOMART

City of Lights Finished Quilt Size: 60” x 82” (152.40 cm x 208.28 cm)

Quilt Design by Matthew Pridemore

City of Lights

Finished Quilt Size: 60” x 82” (152.40 cm x 208.28 cm)

Fabrics in the C’est Magnifique Collection

22921-BLK-CTN-D

22923-BLU-CTN-D

Cityscape

Rolling Hills 22922-GRN-CTN-D

Starry Night

Fields of Gold 22924-YLW-CTN-D

Tranquil Valley 22925-MLT-CTN-D

C’est Magnifique 36in Panel 22926-PNL-CTN-D

Solid Black Solid White

City of Lights

Materials

1 panel

C’est Magnifique 36in Panel (A)

22926-PNL-CTN-D

2 yards (1.83m) Starry Night (B)

22923-BLU-CTN-D

¾ yard (0.69m) Tranquil Valley (C)

22925-MLT-CTN-D

2 ¼ yards (2.06m) Fields of Gold (D)

22924-YLW-CTN-D

2 ⅛ yards (1.94m) Rolling Hills (E)

22922-GRN-CTN-D

⅜ yards (0.34m) Solid White (F)

⅔ yard (0.61m) Solid Black (G)*

5 yards (4.57m) Cityscape (Backing)

22921-BLK-CTN-D

*Includes binding

Cutting Instructions

Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the C’est Magnifique 36in Panel (A):

• Fussy cut (4) 20 ½” x 16 ½” rectangles each centered on a block.

From the Starry Night (B), cut:

• (4) 2” x WOF strips. Sub-cut (8) 2” x 16 ½” strips.

• (8) 2” x 23 ½” WOF strips.

• (2) 2 ½” x WOF strips. Sub-cut (8) 2 ½” x 10 ½” strips.

• (4) 2 ½” x WOF strips. Sub-cut (8) 2 ½” x 18 ½” strips.

• (4) 3 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 3 ½” x 76 ½” strips.

• (3) 3 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 3 ½” x 60 ½” strips.

From the Tranquil Valley (C), cut:

• (2) 10 ½” x WOF strips. Sub-cut (4) 14 ½” x 10 ½” strips.

From the Fields of Gold (D), cut:

• (2) 1 ½” x 74 ½” Length of Fabric (LOF) strips.

• From the remaining fabric cut (8) 2 ½” x 14 ½” WOF strips, (8) 2 ½” x 22 ½” WOF strips and (2) 1 ½” x 54 ½” WOF strips, piece as needed.

From the Rolling Hills (E), cut:

• (3) 2 ½” x 72 ½” LOF strips.

From the Solid White (F), cut:

• (4) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 72 ½” strips.

• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 52 ½” strips.

From the Solid Black (G), cut:

• (8) 2 ½” x WOF strips for the binding.

From the Cityscape (Backing), cut:

• (2) 90” x WOF strips for the backing. Sew the strips together and trim to make the 68” x 90” back.

Block Assembly

1. Sew (1) 2” x 16 ½” Fabric B strip to each side of (1) 20 ½” x 16 ½” Fabric A rectangle. Sew (1) 2” x 23 ½” Fabric B strip to the top and bottom of the Fabric A rectangle to make (1) Block One rectangle (Fig. 1). Trim the block to measure 22 ½” x 18 ½”. Repeat to make (4) Block One rectangles total.

Block One make 4 B

A Trim block to measure 22 ½” x 18 ½” AFTER adding Fabric B borders

2. Sew (1) 2 ½” x 10 ½” Fabric B strip to each side of (1) 14 ½” x 10 ½” Fabric C strip. Sew (1) 2 ½” x 18 ½” Fabric B strip to the top and bottom of the Fabric C strip to make (1) 18 ½” x 14 ½” Unit 1 rectangle (Fig. 2). Repeat to make (4) Unit 1 rectangles total.

Unit 1 make 4

Fig. 1

Fig. 2

City of Lights Page 4

3. Sew (1) 2 ½” x 14 ½”

Fabric D strip to each side of (1) Unit 1 rectangle.

Sew (1) 2 ½” x 22 ½”

Fabric D strip to the top and bottom of the Unit 1 rectangle to make (1) 22 ½” x 18 ½” Block

Two rectangle (Fig. 3).

Repeat to make (4) Block

Two rectangles total.

4. Sew Together (2) Block One rectangles and (2) Block

Two rectangles, lengthwise and alternating them from top to bottom, to make Column One (Fig. 4).

5. Sew together (2) Block Two rectangles and (2) Block

One rectangles, lengthwise and alternating them from top to bottom, to make Column Two (Fig. 4).

6. Sew together Column One, (1) 2 ½” x 72 ½” Fabric E strip and Column Two, lengthwise and in that order from left to right, to make the 46 ½” x 72 ½” Center Block (Fig. 4).

1 1 2 2 2 2 1 1

Fig. 4

Quilt Top Assembly (Follow the Quilt Layout while assembling the quilt top.)

7. Sew (1) 2 ½” x 72 ½” Fabric E strip to each side of the Center Block.

8. Sew (1) 1 ½” x 72 ½” Fabric F strip to each side of the Center Block. Sew (1) 1 ½” x 52 ½” Fabric F strip to the top and bottom of the Center Block.

9. Sew (1) 1 ½” x 74 ½” Fabric D strip to each side of the Center Block. Sew (1) 1 ½” x 54 ½” Fabric D strip to the top and bottom of the Center Block.

10. Sew (1) 3 ½” x 76 ½” Fabric B strip to each side of the Center Block. Sew (1) 3 ½” x 60 ½” Fabric B strip to the top and bottom of the Center Block to make the quilt top.

11. Layer and quilt as desired.

12. Sew the (8) 2 ½” x WOF Fabric G strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

13. Bind as desired.

Quilt Layout

www.3wishesfabric.com

Fig.

By Michael Moon

Quilt Design by Matthew Pridemore

Take to the Sky

Finished Quilt Size: 70” x 70” (177.80 cm x 177.80 cm)

Fabrics in the First in Flight Collection

First in Flight 22975-WHT-CTN-D

Blueprint Green 22976-GRN-CTN-D

Blueprint Red 22976-RED-CTN-D

Flags A Flying 22977-MLT-CTN-D

Control Panel

22978-GRY-CTN-D

Lead the Way 22979-TAN-CTN-D

Flight Gear 22980-BLU-CTN-D

Solid Black Solid White

Take to the Sky

Materials

⅝ yards (0.57m) Blueprint Red (A)

22976-RED-CTN-D

⅝ yards (0.57m) Blueprint Green (B)

22976-GRN-CTN-D

2 yards (1.83m) Solid White (C)

⅛ yard (0.12m) Solid Black (D)

⅞ yards (0.80m) Flags A Flying (E)

22977-MLT-CTN-D

⅔ yard (0.61m) Control Panel (F)*

22978-GRY-CTN-D

1 yard (0.92m) Lead the Way (G)

22979-TAN-CTN-D

⅝ yards (0.57m) Flight Gear (H)

22980-BLU-CTN-D

1 ¾ yards (1.60m) First in Flight (I)

22975-WHT-CTN-D

4 ½ yards (4.12m) First in Flight (Backing)

22975-WHT-CTN-D

*Includes binding

Cutting Instructions

Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Blueprint Red (A), cut:

• (1) 2 ½” x WOF strip. Sub-cut (5) 2 ½” x 4 ½” strips.

• (2) 2 ½” x WOF strips. Sub-cut (5) 2 ½” x 12 ½” strips.

• (1) 1 ½” x WOF strip. Sub-cut (5) 1 ½” x 4 ½” strips.

• (5) Template 2 triangles.

From the Blueprint Green (B), cut:

• (1) 2 ½” x WOF strip. Sub-cut (4) 2 ½” x 4 ½” strips.

• (2) 2 ½” x WOF strips. Sub-cut (4) 2 ½” x 12 ½” strips.

• (1) 1 ½” x WOF strip. Sub-cut (4) 1 ½” x 4 ½” strips.

• (4) Template 2 triangles.

From the Solid White (C), cut:

• (2) 2 ½” x WOF strips. Sub-cut (18) 2 ½” squares.

• (1) 1” x WOF strip. Sub-cut (9) 1” x 4 ½”strips.

• (1) 1 ½” x WOF strip. Sub-cut (9) 1 ½” x 4 ½”strips.

• (2) 3 ½” x WOF strips. Sub-cut (18) 3 ½” x 4 ½” strips.

• (5) 4 ½” x WOF strips. Sub-cut (18) 4 ½” x 9 ½”strips.

• (9) 1 ½” x WOF strips. Sub-cut (18) 1 ½” x 14 ½”strips.

• (9) Template 1 triangles.

• (9) Template 3 triangles.

From the Solid Black (D), cut:

• (1) 1” x WOF strip. Sub-cut (9) 1” x 4 ½”strips.

From the Flags A Flying (E), cut:

• (9) 1 ½” x WOF strips. Sub-cut (18) 1 ½” x 14 ½”strips.

• (9) 1 ½” x WOF strips. Sub-cut (18) 1 ½” x 16 ½”strips.

From the Control Panel (F), cut:

• (1) 2 ½” x WOF strip. Sub-cut (16) 2 ½” squares.

• (7) 2 ½” x WOF strips for the binding.

From the Lead the Way (G), cut:

• (12) 2 ½” x WOF strips. Sub-cut (24) 2 ½” x 16 ½”strips.

From the Flight Gear (H), cut:

• (3) 2 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2 ½” x 56 ½” strips.

• (3) 2 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2 ½” x 60 ½” strips.

From the First in Flight (I), cut:

• (2) 5 ½” x 60 ½” Length of Fabric (LOF) strips.

• From the remaining fabric cut (2) 5 ½” x 70 ½” WOF strips, piece as needed.

From the First in Flight (Backing), cut:

• (2) 78” x WOF strips for the backing. Sew the strips together and trim to make the 78” x 78” back.

Block Assembly

1. Place (1) 2 ½” Fabric C square on the left side of (1) 2 ½” x 4 ½” Fabric A strip, right sides together (Fig. 1). Sew across the diagonal of the square from the upper right corner to the lower left corner (Fig. 1). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle, leaving a ¼” seam allowance (Fig. 2).

2 Place another 2 ½” Fabric C square on the right side of the 2 ½” x 4 ½” Fabric A strip, right sides together (Fig. 3). Sew across the diagonal of the square from the upper left corner to the lower right corner (Fig. 3). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle, leaving a ¼” seam allowance to make (1) Unit 1 strip (Fig. 4).

3. Repeat Steps 1-2 to make (5) Unit 1 strips total.

4. Repeat Steps 1-2 and refer to Figure 5 for fabric identification, placement and seam direction to make (5) Unit 2 strips total.

Fig. 1

Fig. 2

Fig. 5

Fig. 3

Fig. 4

Take to the Sky

6. Sew together (1) 1” x 4 ½” Fabric C strip, (1) 1” x 4 ½” Fabric D strip and (1) Unit 1 strip, lengthwise and in that order from top to bottom, to make (1) 4 ½” x 3 ½” Unit 3 strip (Fig. 6). Repeat to make (5) Unit 3 strips total.

7. Sew together (1) 1” x 4 ½” Fabric C strip, (1) 1” x 4 ½” Fabric D strip and (1) Unit 2 strip, lengthwise and in that order from top to bottom, to make (1) 4 ½” x 3 ½” Unit 4 strip (Fig. 7). Repeat to make (4) Unit 4 strips total.

8. Place (1) Fabric C Template 1 triangle on top of (1) Fabric A Template 2 triangle, right sides together, aligning the left sides (Fig. 8). Sew the (2) triangles together along the left side. Press the smaller triangle open.

9. Place (1) Fabric C Template 3 triangle on top of the Fabric A Template 2 triangle, right sides together, aligning the right sides (Fig. 9). Sew the (2) triangles together along the right side. Press the smaller triangle open to make (1) Unit 5 strip (Fig. 10). Trim the unit to measure 4 ½” x 7 ½”.

10. Repeat Steps 8-9 to make (5) Unit 5 strips total.

11. Repeat Steps 8-9 and refer to Figure 11 for fabric identification, placement and seam direction to make (4) 4 ½” x 7 ½” Unit 6 strips.

13. Sew together (1) Unit 6 strip, (1) 1 ½” x 4 ½” Fabric B strip and (1) 1 ½” x 4 ½” Fabric C strip, in that order from top to bottom, to make (1) 4 ½” x 9 ½”

Unit 8 strip (Fig. 12). Repeat to make (4) Unit 8 strips total.

Fig. 9

Fig. 10

12. Sew together (1) Unit 5 strip, (1) 1 ½” x 4 ½” Fabric A strip and (1) 1 ½” x 4 ½” Fabric C strip, in that order from top to bottom, to make (1) 4 ½” x 9 ½”

Unit 7 strip (Fig. 12). Repeat to make (5) Unit 7 strips total.

14. Sew together (1) 3 ½” x 4 ½” Fabric C strip to each side of (1) Unit 3 strip to make the top row.

Sew (1) 4 ½” x 9 ½” Fabric C strip to each side of (1) Unit 7 strip lengthwise to make the bottom row.

Sew together the top row, (1) 2 ½” x 12 ½” Fabric A strip and the bottom row, lengthwise and in that order from top to bottom, to make (1) 12 ½” x 14 ½” Unit 9 rectangle (Fig. 14). Repeat to make (5) Unit 9 rectangles.

15. Sew together (1) 3 ½” x 4 ½” Fabric C strip to each side of (1) Unit 4 strip to make the top row.

Sew (1) 4 ½” x 9 ½” Fabric C strip to each side of (1) Unit 8 strip lengthwise to make the bottom row.

Sew together the top row, (1) 2 ½” x 12 ½” Fabric B strip and the bottom row, lengthwise and in that order from top to bottom, to make (1) 12 ½” x 14 ½” Unit 10 rectangle (Fig. 15). Repeat to make (4) Unit 10 rectangles.

16. Sew (1) 1 ½” x 14 ½” Fabric C strip to each side of (1) Unit 9 rectangle lengthwise to make (1) 14 ½” x 14 ½” Unit 11 square (Fig. 16). Repeat to make (5) Unit 11 squares total.

Fig. 6

Fig. 8 Fig. 12

Fig. 14

Fig. 13

Fig. 15

Fig. 16

Fig. 11

Fig. 7

Take to the Sky

17. Sew (1) 1 ½” x 14 ½” Fabric C strip to each side of (1) Unit 10 rectangle lengthwise to make (1) 14 ½” x 14 ½” Unit 12 square (Fig. 17). Repeat to make (4) Unit 12 squares total.

18. Sew (1) 1 ½” x 14 ½” Fabric E strip to each side of (1) Unit 11 square. Sew (1)

1 ½” x 16 ½” Fabric E strip to the top and bottom of the Unit 11 square to make (1) 16 ½” x 16 ½” Block One square (Fig. 18). Repeat to make (5) Block One squares total.

Fig. 17

Fig. 18

19. Sew (1) 1 ½” x 14 ½” Fabric E strip to each side of (1) Unit 12 square. Sew (1) 1 ½” x 16 ½” Fabric E strip to the top and bottom of the Unit 12 square to make (1) 16 ½” x 16 ½” Block Two square (Fig. 18). Repeat to make (4) Block Two squares total.

Fig. 19

20. Sew together (4) 2 ½” Fabric F squares and (3) 2 ½” x 16 ½” Fabric G strips, alternating them from left to right, to make Row One (Fig. 20). Repeat to make Row Three, Row Five and Row Seven.

21. Sew together (1) 2 ½” x 16 ½” Fabric G strip, (1) Block

One square, (1) 2 ½” x 16 ½” Fabric G strip, (1) Block

Two square, (1) 2 ½” x 16 ½” Fabric G strip, (1) Block One square and (1) 2 ½” x 16 ½” Fabric G strip, in that order from left to right, to make Row Two (Fig. 20). Repeat to make Row Six.

22. Sew together (1) 2 ½” x 16 ½” Fabric G strip, (1) Block

Two square, (1) 2 ½” x 16 ½” Fabric G strip, (1) Block

One square, (1) 2 ½” x 16 ½” Fabric G strip, (1) Block Two square and (1) 2 ½” x 16 ½” Fabric G strip, in that order from left to right, to make Row Four (Fig. 20).

23. Sew together the (7) pieced Rows, lengthwise and in numerical order from top to bottom, to make the 56 ½” x 56 ½” Center Block (Fig. 20).

Fig. 20

Quilt Top Assembly (Follow the Quilt Layout on Page 7 while assembling the quilt top.)

24. Sew (1) 2 ½” x 56 ½” Fabric H strip to each side of the Center Block. Sew (1) 2 ½” x 60 ½” Fabric H strip to the top and bottom of the Center Block.

25. Sew (1) 5 ½” x 60 ½” Fabric I strip to each side of the Center Block. Sew (1) 5 ½” x 70 ½” Fabric I strip to the top and bottom of the Center Block to make the quilt top.

26. Layer and quilt as desired.

27. Sew the (7) 2 ½” x WOF Fabric F strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

28. Bind as desired.

Take to the Sky

100% Templates

1” square for scale

Template 1 (T-1)

NOTE: All templates should be cut from a single layer of fabric.

Template 2 (T-2)

Template 3 (T-3)

Center Block

Quilt Layout

By MOMART

Lil Cuties

Quilt Size: 60” x 68”

cm x 172.72 cm)

Quilt Design by Matthew Pridemore

Lil Cuties

Finished Quilt Size: 60” x 68” (152.40 cm x 172.72 cm)

Fabrics in the Fur-Ever Friends Collection

Playful Pups

22970-MLT-CTN-D

Butterflies and Bubbles

22971-BLU-CTN-D

Morning Glory

22972-BLK-CTN-D

Doggone Cute

22973-WHT-CTN-D

Fur-Ever Friends 36in Panel

22974-PNL-CTN-D

Solid White

Lil Cuties

Materials

1 panel

Fur-Ever Friends 36in Panel (A)

22974-PNL-CTN-D

⅞ yards (0.80m) Solid White (B)

½ yard (0.46m) Morning Glory (C)

22972-BLK-CTN-D

1 ⅜ yards (1.26m) Butterflies and Bubbles (D)*

22971-BLU-CTN-D

1 ⅔ yards (1.53m) Playful Pups (E)

22970-MLT-CTN-D

⅞ yards (0.80m) Doggone Cute (F)

22973-WHT-CTN-D

4 yards (3.66m) Doggone Cute (Backing)

22973-WHT-CTN-D

*Includes binding

Cutting Instructions

Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Fur-Ever Friends 36in Panel (A):

• Fussy cut (1) 32 ½” x 40 ½” rectangle centered on four panels.

From the Solid White (B), cut:

• (2) 2” x 40 ½” WOF strips.

• (2) 2” x 35 ½” WOF strips.

• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 46 ½” strips.

• (2) 1 ½” x 40 ½” WOF strips.

• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 52 ½” strips.

• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 46 ½” strips.

From the Morning Glory (C), cut:

• (3) 2 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2 ½” x 42 ½” strips.

• (2) 2 ½” x 38 ½” WOF strips.

From the Butterflies and Bubbles (D), cut:

• (3) 2 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2 ½” x 48 ½” strips.

• (3) 2 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2 ½” x 44 ½” strips.

• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 60 ½” strips.

• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 54 ½” strips.

• (7) 2 ½” x WOF strips for the binding.

From the Playful Pups (E), cut:

• (2) 3 ½” x 54 ½” Length of Fabric (LOF) strips.

• (3) 3 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 3 ½” x 52 ½” strips.

From the Doggone Cute (F), cut:

• (4) 3 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 3 ½” x 62 ½” strips.

• (3) 3 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 3 ½” x 60 ½” strips.

From the Doggone Cute (Backing), cut:

• (2) 68” x WOF strips for the backing. Sew the strips together and trim to make the 68” x 76” back.

Block Assembly

1. Sew (1) 2” x 40 ½” Fabric B strip to each side of (1) 32 ½” x 40 ½”

Fabric A rectangle. Sew (1) 2” x 35 ½” Fabric B strip to the top and bottom of the Fabric A rectangle to make the Center Block (Fig. 1). Trim the block to measure 34 ½” x 42 ½”.

Center Block

BB A Trim block to measure

34 ½” x 42 ½” AFTER adding Fabric B borders

Quilt Top Assembly (Follow the Quilt Layout while assembling the quilt top.)

2. Sew (1) 2 ½” x 42 ½” Fabric C strip to each side of the Center Block. Sew (1) 2 ½” x 38 ½” Fabric C strip to the top and bottom of the Center Block.

3. Sew (1) 1 ½” x 46 ½” Fabric B strip to each side of the Center Block. Sew (1) 1 ½” x 40 ½” Fabric B strip to the top and bottom of the Center Block.

4. Sew (1) 2 ½” x 48 ½” Fabric D strip to each side of the Center Block. Sew (1) 2 ½” x 44 ½” Fabric D strip to the top and bottom of the Center Block.

5. Sew (1) 1 ½” x 52 ½” Fabric B strip to each side of the Center Block. Sew (1) 1 ½” x 46 ½” Fabric B strip to the top and bottom of the Center Block.

Fig. 1

Lil Cuties Page

6. Sew (1) 3 ½” x 54 ½” Fabric E strip to each side of the Center Block. Sew (1) 3 ½” x 52 ½” Fabric E strip to the top and bottom of the Center Block.

7. Sew (1) 1 ½” x 60 ½” Fabric D strip to each side of the Center Block. Sew (1) 1 ½” x 54 ½” Fabric D strip to the top and bottom of the Center Block.

8. Sew (1) 3 ½” x 62 ½” Fabric F strip to each side of the Center Block. Sew (1) 3 ½” x 60 ½” Fabric F strip to the top and bottom of the Center Block to make the quilt top.

9. Layer and quilt as desired.

10. Sew the (7) 2 ½” x WOF Fabric D strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

11. Bind as desired.

Quilt Layout

By Lisa Perry

Long Haired Beauty Finished Quilt Size: 74” x 92” (187.96 cm x 233.68 cm)

Quilt Design by Matthew Pridemore

Long Haired Beauty

Finished Quilt Size: 74” x 92” (187.96 cm x 233.68 cm)

Fabrics in the Highland Hazel Collection

Bows and Flowers 22983-MNT-CTN-D

Packed Hazel 22984-TEA-CTN-D

Highland Farm 22985-WHT-CTN-D

Cherries Jubilee 22986-PNK-CTN-D

Quilt Market 22987-MLT-CTN-D

Long Haired Beauty

Materials

1 ⅞ yards (1.72m) Bows and Flowers (A)

22983-MNT-CTN-D

1 ½ yards (1.38m) Packed Hazel (B)

22984-TEA-CTN-D

1 ½ yards (1.38m) Cherries Jubilee (C)*

22986-PNK-CTN-D

1 ¼ yards (1.15m) Quilt Market (D)

22987-MLT-CTN-D

2 yards (1.83m) Highland Farm (E)

22985-WHT-CTN-D

5 ¾ yards (5.26m) Highland Farm (Backing)

22985-WHT-CTN-D

*Includes binding

Cutting Instructions

Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Bows and Flowers (A), cut:

• (7) 8 ½” x WOF strips. Sub-cut (20) 8 ½” x 12 ½” strips.

From the Packed Hazel (B), cut:

• (3) 8 ½” x WOF strips. Sub-cut (20) 8 ½” x 4 ½” strips.

• (5) 4 ½” x WOF strips. Sub-cut (20) 4 ½” x 8 ½” strips.

From the Cherries Jubilee (C), cut:

• (5) 4 ½” x WOF strips. Sub-cut (20) 4 ½” x 8 ½” strips.

• (9) 2 ½” x WOF strips for the binding.

From the Quilt Market (D), cut:

• (5) 8 ½” x WOF strips. Sub-cut (20) 8 ½” squares.

From the Highland Farm (E), cut:

• (2) 16 ½” x WOF strips. Sub-cut (25) 2 ½” x 16 ½” strips.

• (11) 2 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (6) 2 ½” x 74 ½” strips.

From the Highland Farm (Backing), cut:

• (2) 100” x WOF strips for the backing. Sew the strips together and trim to make the 82” x 100” back.

Block Assembly

1. Sew (1) 8 ½” x 12 ½” Fabric A strip to the top of (1) 8 ½” x 4 ½”

Fabric B strip to make the left column. Sew (1) 4 ½” x 8 ½” Fabric B strip to the left side of (1) 4 ½” x 8 ½” Fabric C strip lengthwise. Sew the newly sewn square to the top of (1) 8 ½” Fabric D square to make the right column. Sew together the (2) columns lengthwise to make (1) 16 ½” Block One square (Fig. 1). Repeat to make (5) Block One squares total.

2. Sew (1) 4 ½” x 8 ½” Fabric C strip to the left side of (1) 4 ½” x 8 ½”

Fabric B strip lengthwise. Sew the newly sewn square to the bottom of (1) 8 ½” Fabric D square to make the left column. Sew (1) 8 ½” x 4 ½”

Fabric B strip to the top of (1) 8 ½” x 12 ½” Fabric A strip to make the right column. Sew together the (2) columns lengthwise to make (1) 16 ½”

Block Two square (Fig. 2). Repeat to make (5) Block Two squares total.

3. Sew (1) 4 ½” x 8 ½” Fabric B strip to the left side of (1) 8 ½” x 12 ½”

Fabric A strip to make the top row.

Sew (1) 8 ½” x 4 ½” Fabric B strip to the top of (1) 4 ½” x 8 ½” Fabric C strip lengthwise. Sew the newly sewn square to the right side of (1) 8 ½”

Fabric D square to make the bottom row. Sew together the (2) rows lengthwise to make (1) 16 ½” Block

Three square (Fig. 3). Repeat to make (5) Block Three squares total.

Fig. 1

Fig. 2

Fig.

Long Haired Beauty Page 4

4. Sew (1) 4 ½” x 8 ½” Fabric C strip to the top of (1) 8 ½” x 4 ½”

Fabric B strip lengthwise. Sew the newly sewn square to the left side of (1) 8 ½” Fabric D square to make the top row. Sew (1) 8 ½” x 12 ½” Fabric A strip to the left side of (1) 4 ½” x 8 ½” Fabric B strip to make the bottom row. Sew together the (2) rows lengthwise to make (1) 16 ½” Block Four square (Fig. 4). Repeat to make (5) Block Four squares total.

Quilt Top Assembly

Four

(Follow the Quilt Layout while assembling the quilt top.)

5. Sew together (1) 2 ½” x 16 ½” Fabric E strip, (1) Block One square, (1) 2 ½” x 16 ½” Fabric E strip, (1) Block Two square, (1) 2 ½” x 16 ½” Fabric E strip, (1) Block Three square, (1) 2 ½” x 16 ½” Fabric E strip, (1) Block Four

square and (1) 2 ½” x 16 ½” Fabric E strip, in that order from left to right to make Row One.

6. Repeat Step 5 and refer to the Quilt Layout for fabric and unit identification, placement and orientation to make Row Two through Row Five.

7. Sew together (6) 2 ½” x 74 ½” Fabric E strips and the (5) pieced Rows in numerical order, lengthwise and alternating them from top to bottom, to make the quilt top.

8. Layer and quilt as desired.

9. Sew the (9) 2 ½” x WOF Fabric C strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

10. Bind as desired.

One

Quilt Layout

By Shawna Stewart

Hummingbird Bouquet Hummingbird Bouquet

Small Wonders Finished Quilt Size: 70” x 81” (177.80 cm x 205.74 cm)

Quilt Design by Matthew Pridemore

Small Wonders

Finished Quilt Size: 70” x 81” (177.80 cm x 205.74 cm)

Fabrics in the Hummingbird Bouquet Collection

22957-YLW-CTN-D

22958-MLT-CTN-D

22959-MLT-CTN-D

22960-BLU-CTN-D

Sunflower Jewels

Watercolor Swirls

Flutter Texture

Fanciful Flyers

Poppy Field 22961-MLT-CTN-D

Hummingbird Bouquet 36in Panel 22962-PNL-CTN-D

Solid White

Small Wonders

Materials

1 panel Hummingbird Bouquet 36in Panel (A)

22962-PNL-CTN-D

¾ yard (0.69m) Watercolor Swirls (B)

22958-MLT-CTN-D

3 ⅛ yards (2.86m) Solid White (C)

¾ yard (0.69m) Fanciful Fliers (D)

22960-BLU-CTN-D

1 ⅝ yards (1.49m) Poppy Field (E)

22961-MLT-CTN-D

1 ⅔ yards (1.53m) Sunflower Jewels (F)*

22957-YLW-CTN-D

1 ⅜ yards (1.26m) Flutter Texture (G)

22959-MLT-CTN-D

5 yards (4.57m) Watercolor Swirls (Backing)

22958-MLT-CTN-D

*Includes binding

Cutting Instructions

Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Hummingbird Bouquet 36in Panel (A):

• Fussy cut (4) 20 ½” x 16 ½” rectangles each centered on a block.

From the Watercolor Swirls (B), cut:

• (4) 2” x WOF strips. Sub-cut (8) 2” x 16 ½” strips.

• (8) 2” x 23 ½” WOF strips.

From the Solid White (C), cut:

• (18) 4” x WOF strips. Sub-cut (176) 4” squares.

• (5) 4 ⅜” x WOF strips. Sub-cut (44) 4 ⅜” squares.

• (4) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 75 ½” strips.

• (2) 1 ½” x 24 ½” WOF strips.

• (3) 1 ½” x 22 ½” WOF strips.

From the Fanciful Fliers (D), cut:

• (3) 7 ½” x WOF strips. Sub-cut (12) 7 ½” squares.

From the Poppy Field (E), cut:

• (7) 7 ½” x WOF strips. Sub-cut (32) 7 ½” squares.

From the Sunflower Jewels (F), cut:

• (9) 4” x WOF strips. Sub-cut (88) 4” squares.

• (8) 2 ½” x WOF strips for the binding.

From the Flutter Texture (G), cut:

• (5) 4 ⅜” x WOF strips. Sub-cut (44) 4 ⅜” squares.

• (4) 2 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2 ½” x 77 ½” strips.

• (4) 2 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2 ½” x 70 ½” strips.

From the Watercolor Swirls (Backing), cut:

• (2) 89” x WOF strips for the backing. Sew the strips together and trim to make the 78” x 89” back.

Block Assembly

1. Place (1) 4” Fabric C square on the top left corner of (1) 7 ½” Fabric D square, right sides together (Fig. 1). Sew across the diagonal of the smaller square from the upper right corner to the lower left corner (Fig. 1). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle ¼” away from the sewn seam (Fig. 2).

2. Follow Figure 3 for the seam direction to add a 4” Fabric C square to each of the remaining corners of the 7 ½” Fabric D square to make (1) 7 ½” Block One square (Fig. 4).

3. Repeat Steps 1-2 to make (12) Block One squares total.

Block One make 12

Fig. 3 Fig. 4

4. Repeat Steps 1-2 and refer to Figure 5 for fabric identification, placement and seam orientation to make (32) 7 ½” Block Two squares.

Block Two make 32

Fig. 1

Fig. 2

Fig. 5

Small Wonders

5. Place (1) 4 ⅜” Fabric G square on top of (1) 4 ⅜” Fabric C square, right sides together. Draw a line across the diagonal of the top square (Fig. 6). Sew ¼” away from each side of the drawn diagonal line (Fig. 6). Cut the (2) squares apart on the drawn diagonal line (Fig. 7) to make (2) halfsquare triangles. Trim the half-square triangles to measure 4” to make (2) Unit 1 squares (Fig. 8). Repeat to make (88) Unit 1 squares total.

10. Sew (1) 2” x 16 ½”

Fabric B strip to each side of (1) 20 ½” x 16 ½” Fabric A rectangle. Sew (1) 2” x 23 ½” Fabric B strip to the top and bottom of the Fabric A rectangle to make (1) Block Four rectangle (Fig. 11). Trim the block to measure 22 ½” x 18 ½”. Repeat to make (4) Block Four rectangles total.

6. Sew together (4) Unit 1 squares into a 2 x 2 matrix to make (1) 7 ½” Unit 2 square. Repeat to make (22) Unit 2 squares total.

7. Place (1) 4” Fabric F square on the top left corner of (1) Unit 2 square, right sides together. Sew across the diagonal of the smaller square from the upper right corner to the lower left corner. Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle ¼” away from the sewn seam.

8. Follow Figure 10 for the seam direction to add a 4” Fabric F square to each of the remaining corners of the Unit 2 square to make (1) 7 ½” Block Three square.

9. Repeat Steps 7-8 to make (22) Block Three squares total.

11. Sew together (1) Block One square, (1) Block Two square and (1) Block Three square, in that order from left to right, to make Row One (Fig. 12). Repeat to make Row Five, and Row Nine.

12. Sew (1) Block Two square to each side of (1) Block Three square to make Row Two (Fig. 12). Repeat to make Row Four, Row Six, Row Eight and Row Ten.

13. Sew together (1) Block Three square, (1) Block Two square and (1) Block One square, in that order from left to right, to make Row Three (Fig. 12). Repeat to make Row Seven, and Row Eleven.

14. Sew together the (11) Rows from Steps 11-13, lengthwise and in numerical order from top to bottom, to make the 21 ½” x 77 ½” Column One (Fig. 12).

Fig. 6

Fig. 8

Fig. 9

Fig. 10

Fig. 11

Fig. 12

Fig.

Small Wonders

15. Refer to Figure 13 for component identification and placement to make Row One through Row Eleven.

16. Sew together the (11) Rows from Step 15, lengthwise and in numerical order from top to bottom, to make the 21 ½” x 77 ½” Column Three (Fig. 13).

17. Sew together (4) Block Four rectangles and (3) 1 ½” x 22 ½” Fabric C strips, lengthwise and alternating them from top to bottom, to make (1) Unit 3 strip (Fig. 14).

18. Sew (1) 1 ½” x 75 ½” Fabric C strip to each side of the Unit 3 strip. Sew (1) 1 ½” x 24 ½” Fabric C strip to the top and bottom of the Unit 3 strip to make the 24 ½” x 77 ½” Column Two (Fig. 15).

19. Sew together Column One, Column Two and Column Three, lengthwise and in that order from left to right, to make the 66 ½” x 77 ½” Center Block (Fig. 16).

Fig.

Small Wonders Page 6

Quilt Top Assembly

(Follow the Quilt Layout while assembling the quilt top.)

20. Sew (1) 2 ½” x 77 ½” Fabric G strip to each side of the Center Block. Sew (1) 2 ½” x 70 ½” Fabric G strip to the top and bottom of the Center Block to make the quilt top.

21. Layer and quilt as desired.

22. Sew the (8) 2 ½” x WOF Fabric F strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

23. Bind as desired.

www.3wishesfabric.com

Quilt Layout

Center Block

By Duncan Macdougal

Monster Rally Finished Quilt Size: 56” x 65”

cm x 165.10 cm)

Quilt Design by Matthew Pridemore

Monster Rally

Finished Quilt Size: 56” x 65” (142.24 cm x 165.10cm)

Fabrics in the Mash the Throttle Collection

Solid Black

Solid Gray

Solid White

Monster Rally

Materials

1 ¾ yards (1.60m) Tread Marks (A)

22991-BLK-CTN-D

½ yard (0.46m) Camo Tracks (B)

22992-MLT-CTN-D

1 ⅝ yards (1.49m) Solid White (C)

⅓ yards (0.31m) Solid Gray (D)

⅛ yards (0.12m) Solid Black (E)

⅞ yard (0.81m) Final Lap (F)*

22990-WHT-CTN-D

1 yard (0.92m) Monster Truck Outline (G)

22989-TRQ-CTN-D

1 ⅔ yards (1.53m) Full Throttle (H)

22988-WHT-CTN-D

3 ¾ yards (3.43m) Full Throttle (Backing)

22988-WHT-CTN-D

*Includes binding

You will also need:

• Fusible web

Cutting Instructions

Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Tread Marks (A), cut:

• (3) 12 ¼” x WOF strips. Sub-cut (9) 12 ¼” squares. From each square cut (1) 8 ½”square on-point (Fig. 1).

• See instructions to cut (15) Tires.

From the Camo Tracks (B), cut:

• (3) 5” x WOF strips. Sub-cut (18) 5” squares.

From the Solid White (C), cut:

• (4) 8 ½” x WOF strips. Sub-cut (15) 8 ½” squares.

• (4) 2 ½” x WOF strips.

• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 55 ½” strips.

• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 48 ½” strips.

From the Solid Gray (D), cut:

• See instructions to cut (15) Rims.

From the Solid Black (E), cut:

• See instructions to cut (15) Rim Centers.

From the Final Lap (F), cut:

• (4) 2 ½” x WOF strips.

• (7) 2 ½” x WOF strips for the binding.

From the Monster Truck Outline (G), cut:

• (6) 1 ½” x WOF strips. Sub-cut (24) 1 ½” x 8 ½” strips.

• (6) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (5) 1 ½” x 44 ½” strips.

• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 53 ½” strips.

• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 46 ½” strips.

From the Full Throttle (H), cut:

• (2) 4 ½” x 57 ½” Length of Fabric (LOF) strips.

• From the remaining fabric cut (2) 4 ½” x 56 ½” WOF strips, piece as needed.

From the Full Throttle (Backing), cut:

• (2) 64” x WOF strips for the backing. Sew the strips together and trim to make the 64” x 73” back.

Block Assembly

1. Place (1) 5” Fabric B square on the top left corner of (1) 8 ½” Fabric A square, right sides together (Fig. 2). Sew across the diagonal of the smaller square from the upper right corner to the lower left corner (Fig. 2). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle ¼” away from the sewn seam (Fig. 3).

2. Follow Figure 4 for the seam direction to add a 5” Fabric B square to the lower right corner of the 8 ½” Fabric A square to make (1) 8 ½” Block One square (Fig. 5).

3. Repeat Steps 1-2 to make (9) Block One squares total.

Fig. 2

Fig. 1

Fig. 3

Fig. 4

Fig. 5

4. Following the manufacturer’s instructions, trace the listed number of each template onto the paper side of the fusible web. Roughly cut out each template about 1/8” outside the drawn lines.

5. Press each template onto the wrong side of the fabrics as listed on the templates. Cut out each template on the drawn lines.

6. Refer to Figure 6 to center and press (1) Fabric D Rim, (1) Fabric A Tire and (1) Fabric E Rim Center onto (1) 8 ½” Fabric C square.

7. Finish the raw edges of each shape with a decorative stitch such as a buttonhole or satin stitch to make (1) 8 ½” Block Two square (Fig. 6).

8. Repeat Steps 6-7 to make (15) Block Two squares total.

9. Sew together (2) 2 ½” x WOF Fabric F strips and (2) 2 ½” x WOF Fabric C strips, lengthwise and alternating them from left to right, to make (1) Strip Set 1 (Fig. 7). Repeat to make a second Strip Set 1.

10. From the (2) Strip Set 1’s cut (24) 8 ½” x 2 ½” Unit 1 strips (Fig. 8).

11. Sew together (4) Unit 1 strips lengthwise to make (1) 8 ½” Block Three square (Fig. 9). Repeat to make (6) Block Three squares total.

12. Sew together (1) Block One square, (1) 1 ½” x 8 ½” Fabric G strip, (1) Block Two square, (1) 1 ½” x 8 ½” Fabric G strip, (1) Block One square, (1) 1 ½” x 8 ½” Fabric G strip, (1) Block Two square, (1) 1 ½” x 8 ½” Fabric G strip and (1) Block One square, in that order from left to right, to make Row One (Fig. 10). Repeat to make Row Three and Row Five. Pay attention to the Block One orientations.

13. Sew together (1) Block Two square, (1) 1 ½” x 8 ½” Fabric G strip, (1) Block Three square, (1) 1 ½” x 8 ½” Fabric G strip, (1) Block Two square, (1) 1 ½” x 8 ½” Fabric G strip, (1) Block Three square, (1) 1 ½” x 8 ½” Fabric G strip and (1) Block Two square, in that order from left to right, to make Row Two (Fig. 10). Repeat to make Row Four and Row Six.

14. Sew together the (6) pieced Rows in numerical order and (5) 1 ½” x 44 ½” Fabric G strips, lengthwise and alternating them from top to bottom, to make the 44 ½” x 53 ½” Center Block (Fig. 10).

Fig. 7

Fig. 9

Fig. 10

Fig. 8

Fig. 6

Monster Rally

Quilt Top Assembly

(Follow the Quilt Layout while assembling the quilt top.)

15. Sew (1) 1 ½” x 53 ½” Fabric G strip to each side of the Center Block. Sew (1) 1 ½” x 46 ½” Fabric G strip to the top and bottom of the Center Block.

16. Sew (1) 1 ½” x 55 ½” Fabric C strip to each side of the Center Block. Sew (1) 1 ½” x 48 ½” Fabric C strip to the top and bottom of the Center Block.

17. Sew (1) 4 ½” x 57 ½” Fabric H strip to each side of the Center Block. Sew (1) 4 ½” x 56 ½” Fabric H strip to the top and bottom of the Center Block to make the quilt top.

18. Layer and quilt as desired.

19. Sew the (7) 2 ½” x WOF Fabric F strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

20. Bind as desired.

100% Templates

1” square for scale Rim Trace 15 Fabric D Rim Center Trace 15 Fabric E

Quilt Layout

Monster Rally Page

100% Templates

1” square for scale

By Ivan Guaderrama

Quilt Design by Matthew Pridemore

Purrfection

Finished Quilt Size: 67” x 67” (170.18 cm x 170.18 cm)

Fabrics in the Purrfectly Playful Collection

Purrfect Purr-ito

22963-MLT-CTN-D

Kaleidoscope Knit 22964-MLT-CTN-D

Floral Ride

22965-WHT-CTN-D

Bold Butterflies 22966-BLK-CTN-D

Purr-ty Texture

22967-MLT-CTN-D

Distinguished Gentleman 22968-MLT-CTN-D

Purrfectly Playful 36in Panel 22969-PNL-CTN-D

Solid Black Solid White

Purrfection

Materials

1 panel

Purrfectly Playful 36in Panel (A)

22969-PNL-CTN-D

1 ⅛ yards (1.03m) Bold Butterflies (B)

22966-BLK-CTN-D

1 ½ yards (1.38m) Solid White (C)

1 yard (0.92m) Purr-ty Texture (D)

22967-MLT-CTN-D

¾ yard (0.69m) Kaleidoscope Knit (E)

22964-MLT-CTN-D

1 ⅔ yards (1.53m) Purrfect Purr-ito (F)

22963-MLT-CTN-D

⅝ yards (0.58m) Solid Black (G)*

4 ¼ yards (3.89m) Distinguished Gentleman (Backing)

22968-MLT-CTN-D

*Includes binding

Cutting Instructions

Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Purrfectly Playful 36in Panel (A):

• Fussy cut (9) 10 ½” squares each centered on a block.

From the Bold Butterflies (B), cut:

• (5) 2” x WOF strips. Sub-cut (18) 2” x 10 ½” strips.

• (6) 2” x WOF strips. Sub-cut (18) 2” x 13 ½” strips.

• (3) 2” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2” x 54 ½” strips.

• (3) 2” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2” x 57 ½” strips.

From the Solid White (C), cut:

• (8) 3 ½” x WOF strips. Sub-cut (96) 3 ½” squares.

• (6) 3 ½” x WOF strips. Sub-cut (32) 3 ½” x 6 ½” strips.

From the Purr-ty Texture (D), cut:

• (7) 3 ½” x WOF strips. Sub-cut (40) 3 ½” x 6 ½” strips.

• (2) 3 ½” x WOF strips. Sub-cut (20) 3 ½” squares.

From the Kaleidoscope Knit (E), cut:

• (6) 3 ½” x WOF strips. Sub-cut (64) 3 ½” squares.

From the Purrfect Purr-ito (F), cut:

• (2) 5 ½” x 57 ½” Length of Fabric (LOF) strips.

• From the remaining fabric cut (2) 5 ½” x 67 ½” WOF strips, piece as needed.

From the Solid Black (G), cut:

• (7) 2 ½”x WOF strips for the binding.

From the Distinguished Gentleman (Backing), cut:

Block Assembly

1. Sew (1) 2” x 10 ½” Fabric B strip to each side of (1) 10 ½” Fabric A square. Sew (1) 2” x 13 ½” Fabric B strip to the top and bottom of the Fabric A square to make (1) Unit 1 square (Fig. 1). Trim the unit to measure 12 ½” x 12 ½”. Repeat to make (9) Unit 1 squares total.

• (2) 75” x WOF strips for the backing. Sew the strips together and trim to make the 75” x 75” back. Unit 1 make 9

2. Place (1) 3 ½” Fabric C square on the left side of (1) 3 ½” x 6 ½” Fabric D strip, right sides together (Fig. 2). Sew across the diagonal of the square from the upper right corner to the lower left corner (Fig. 2). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle, leaving a ¼” seam allowance (Fig. 3).

3. Place another 3 ½” Fabric C square on the right side of the 3 ½” x 6 ½” Fabric D strip, right sides together (Fig. 4). Sew across the diagonal of the square from the upper left corner to the lower right corner (Fig. 4). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle, leaving a ¼” seam allowance to make (1) Unit 2 strip (Fig. 5).

4. Repeat Steps 2-3 to make (40) Unit 2 strips total.

5. Repeat Steps 2-3 and refer to Figure 6 for fabric identification, placement and seam direction to make (32) Unit 3 strips.

Fig. 1

Fig. 2

Fig. 6

Fig. 5

Fig. 3

Fig. 4

Purrfection

6. Sew together (2) Unit 2 strips end to end to make (1) 12 ½” x 3 ½” Unit 4 strip (Fig. 7). Repeat to make (20) Unit 4 strips total.

9. Sew (1) Unit 5 strip to each side of (1) Unit 1 square. Sew (1) Fabric C square to each end of (1) Unit 5 strip. Repeat to make a second strip. Sew (1) newly sewn strip to the top and bottom of the Unit 1 square to make (1) 18 ½” Block Two square (Fig. 10). Repeat to make (4) Block Two squares total.

7. Sew together (2) Unit 3 strips end to end to make (1) 12 ½” x 3 ½” Unit 5 strip (Fig. 8). Repeat to make (16) Unit 5 strips total.

8. Sew (1) Unit 4 strip to each side of (1) Unit 1 square. Sew (1) Fabric D square to each end of (1) Unit 4 strip. Repeat to make a second strip. Sew (1) newly sewn strip to the top and bottom of the Unit 1 square to make (1) 18 ½” Block One square (Fig. 9). Repeat to make (5) Block One squares total.

10. Sew (1) Block One square to each side of (1) Block Two square to make Row One. Repeat to make Row Three (Fig. 11).

11. Sew (1) Block Two square to each side of (1) Block One square to make Row Two (Fig. 11).

12. Sew together the (3) Rows, lengthwise and in numerical order from top to bottom, to make the 54 ½” x 54 ½” Center Block.

Fig. 8

Fig. 9

Fig. 10

Fig.

Fig. 7

Purrfection Page 5

Quilt Top Assembly

(Follow the Quilt Layout while assembling the quilt top.)

13. Sew (1) 2” x 54 ½” Fabric B strip to each side of the Center Block. Sew (1) 2” x 57 ½” Fabric B strip to the top and bottom of the Center Block.

14. Sew (1) 5 ½” x 57 ½” Fabric F strip to each side of the Center Block. Sew (1) 5 ½” x 67 ½” Fabric F strip to the top and bottom of Center Block to make the quilt top.

15. Layer and quilt as desired.

16. Sew the (7) 2 ½” x WOF Fabric G strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

17. Bind as desired.

www.3wishesfabric.com

Quilt Layout

By Michael Moon

Beach Time

Finished Quilt Size: 48” x 60” (121.92 cm x 152.40 cm)

Quilt Design by Matthew Pridemore

Beach Time

Finished Quilt Size: 48” x 60” (121.92 cm x 152.40 cm)

Fabrics in the Sandsational Collection

Sea Turtle Cove 22927-AQU-CTN-D

Ikat Orange 22928-ORG-CTN-D

Swarm 22929-WHT-CTN-D

Under the Sea 22930-TRQ-CTN-D

Starfish Toss 22931-WHT-CTN-D

22932-BLU-CTN-D

Ocean Life 22933-TRQ-CTN-D

Packed Minnows 22934-NVY-CTN-D

Sea Horsing Around 22935-WHT-CTN-D

Jellyfish

Coral Reef

Beach Time

Materials

1 yard (0.92m) Packed Minnows (A)*

22934-NVY-CTN-D

⅔ yard (0.61m) Sea Turtle Cove (B)

22927-AQU-CTN-D

½ yard (0.46m) Starfish Toss (C)

22931-WHT-CTN-D

⅓ yard (0.31m) Ikat Orange (D)

22928-ORG-CTN-D

⅓ yard (0.31m) Coral Reef (E)

22932-BLU-CTN-D

⅝ yard (0.58m) Sea Horsing Around (F)

22935-WHT-CTN-D

⅞ yard (0.81m) Ocean Life (G)

22933-TRQ-CTN-D

4 yards (3.66m) Under the Sea (Backing)

22930-TRQ-CTN-D

*Includes binding

Cutting Instructions

Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Packed Minnows (A), cut:

• (7) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (6) 1 ½” x 48 ½” strips.

• (3) 1 ¾” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ¾” x 48 ½” strips.

• (6) 2 ½” x WOF strips for the binding.

From the Sea Turtle Cove (B), cut:

• (3) 6 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 6 ½” x 48 ½” strips.

From the Starfish Toss (C), cut:

• (3) 4 ½” x WOF strips. Sub-cut (24) 4 ½” squares.

From the Ikat Orange (D), cut:

• (3) 2 ½” x WOF strips. Sub-cut (48) 2 ½” squares.

From the Coral Reef (E), cut:

• (3) 2 ½” x WOF strips. Sub-cut (48) 2 ½” squares.

From the Sea Horsing Around (F), cut:

• (3) 5 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 5 ½” x 48 ½” strips.

From the Ocean Life (G), cut:

• (2) 14” x WOF strips. Sew the strips together end to end and cut (1) 14” x 48 ½” strip for Row Five.

From the Under the Sea (Backing), cut:

• (2) 68” x WOF strips for the backing. Sew the strips together and trim to make the 56” x 68” back.

Block Assembly

1. Sew (1) 2 ½” Fabric D square to the left side of (1) 2 ½” Fabric E square to make the top row. Sew (1) 2 ½” Fabric E square to the left side of (1) 2 ½” Fabric D square to make the bottom row. Sew together the two rows lengthwise to make (1) 4 ½” Block One square (Fig. 1). Repeat to make (24) Block One squares total.

Quilt Top Assembly

(Follow the Quilt Layout while assembling the quilt top.) 2. Sew (1) 1 ½” x 48 ½” Fabric A strip to the top and bottom of (1) 6 ½” x 48 ½” Fabric B strip lengthwise to make Row One. Repeat to make Row Nine.

3. Sew together (6) 4 ½” Fabric C squares and (6) Block One squares, alternating them from left to right, to make Row Two. Repeat to make Row Seven.

4. Sew together (6) Block One square and (6) 4 ½” Fabric C squares, alternating them from left to right, to make Row Three. Repeat to make Row Eight.

5. Sew together (1) 1 ½” x 48 ½” Fabric A strip, (1) 5 ½” x 48 ½” Fabric F strip and (1) 1 ¾” x 48 ½” Fabric A strip, lengthwise and in that order from top to bottom, to make Row Four.

6. Sew Together (1) 1 ¾” x 48 ½” Fabric A strip, (1) 5 ½” x 48 ½” Fabric F strip and (1) 1 ½” x 48 ½” Fabric A strip, lengthwise and in that order from top to bottom, to make Row Six.

7. Sew together the (9) Rows, lengthwise and in numerical order from top to bottom, to make the quilt top.

8. Layer and quilt as desired.

9. Sew the (6) 2 ½” x WOF Fabric A strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

10. Bind as desired.

Fig. 1

Layout

not for resale

By Duncan Macdougal

Summer Treats

Finished Quilt Size: 50” x 62” (127.00 cm x 157.48 cm)

Quilt Design by Matthew Pridemore

Summer Treats

Finished Quilt Size: 50” x 62” (127.00 cm x 157.48 cm)

Fabrics in the Sweet Summertime Collection

Summertime Sweets 22948-WHT-CTN-D

Geo Texture 22949-MLT-CTN-D

Popsicle Texture 22950-RED-CTN-D

Pop 22951-MLT-CTN-D

22952-TRQ-CTN-D

22953-ORG-CTN-D

22954-BLU-CTN-D

22955-WHT-CTN-D

22956-GRN-CTN-D

Rainbow

Cherries Galore

Orange You Glad

Strawberry Stripe

Ice Cream You Scream

Tossed Fruit

Solid White

Summer Treats

Materials

⅔ yard (0.61m) Solid White (A)

1 yard (0.92m) Popsicle Texture (B)*

22950-RED-CTN-D

½ yard (0.46m) Orange You Glad (C)

22953-ORG-CTN-D

1 ½ yards (1.38m) Geo Texture (D)

22949-MLT-CTN-D

½ yard (0.46m) Strawberry Stripe (E)

22954-BLU-CTN-D

¼ yard (0.23m) Cherries Galore (F)

22952-TRQ-CTN-D

½ yard (0.46m) Rainbow Pop (G)

22951-MLT-CTN-D

⅞ yard (0.81m) Ice Cream You Scream (H)

22955-WHT-CTN-D

½ yard (0.46m) Tossed Fruit (I)

22956-GRN-CTN-D

1 ⅝ yards (1.49m) Summertime Sweets (J)

22948-WHT-CTN-D

3 ¼ yards (2.98m) Ice Cream You Scream (Backing) 22955-WHT-CTN-D

*Includes binding

You will also need:

• Fusible web

Cutting Instructions

Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Solid White (A), cut:

• (2) 9 ½” x WOF strips. Sub-cut (6) 9 ½” squares.

From the Popsicle Texture (B), cut:

• (4) 1 ¼” x WOF strips. Sub-cut (12) 1 ¼” x 11” strips.

• (4) 1 ¼” x WOF strips. Sub-cut (12) 1 ¼” x 12 ½” strips.

• See instructions to cut (1) Eaten Popsicle #1.

• See instructions to cut (1) Eaten Popsicle #2.

• See instructions to cut (2) Small Popsicles.

• (6) 2 ½” x WOF strips for the binding.

From the Orange You Glad (C), cut:

• (3) 1 ¼” x WOF strips. Sub-cut (12) 1 ¼” x 9 ½” strips.

• (4) 1 ¼” x WOF strips. Sub-cut (12) 1 ¼” x 11” strips.

• See instructions to cut (2) Large Popsicles.

• See instructions to cut (2) Small Popsicles.

From the Geo Texture (D), cut:

• (2) 2 ½” x 48 ½” Length of Fabric (LOF) strips.

• (2) 2 ½” x 40 ½” LOF strips.

• See instructions to cut (10) Popsicle Sticks.

• See instructions to cut (2) Cones.

From the Strawberry Stripe (E), cut:

• (1) 12 ½” x WOF strip. Sub-cut (2) 12 ½” squares.

• See instructions to cut (2) Ice Creams.

From the Cherries Galore (F), cut:

• See instructions to cut (2) Ice Creams.

• See instructions to cut (2) Small Popsicles.

From the Rainbow Pop (G), cut:

• (1) 12 ½” x WOF strip. Sub-cut (2) 12 ½” squares.

From the Ice Cream You Scream (H), cut:

• (4) 6 ½” x WOF strips. Sub-cut (24) 6 ½” squares.

From the Tossed Fruit (I), cut:

• (1) 12 ½” x WOF strip. Sub-cut (2) 12 ½” squares.

From the Summertime Sweets (J), cut:

• (2) 5 ½”x 52 ½” LOF strips.

• From the remaining fabric cut (2) 5 ½” x 50 ½” WOF strips, piece as needed.

From the Ice Cream You Scream (Backing), cut:

• (2) 58” x WOF strips for the backing. Sew the strips together and trim to make the 58” x 70” back.

Block Assembly

1. Following the manufacturer’s instructions, trace the listed number of each template onto the paper side of the fusible web. Roughly cut out each template about 1/8” outside the drawn lines.

2. Press each template onto the wrong side of the fabrics as listed on the templates. Cut out each template on the drawn lines.

3. Refer to Figure 1 to arrange and press (2) Fabric D Popsicle Sticks, (1) Fabric B Eaten Popsicle #1 and (1) Fabric C Large Popsicle onto (1) 9 ½” Fabric A square.

4. Finish the raw edges of each shape with a decorative stitch such as a buttonhole or satin stitch to make (1) 9 ½” Unit 1 square (Fig. 1.

Fig.

Summer Treats

5. Repeat Steps 3-4 and refer to Figures 2-6 for fabric and component identification and placement to make (1) 9 ½” unit square for Unit 2 through Unit 6.

6. Sew (1) 1 ¼” x 9 ½” Fabric C strip to each side of (1) Unit 1 square. Sew (1) 1 ¼” x 11” Fabric C strip to the top and bottom of the Unit 1 square to make (1) 11” Unit 7 square (Fig. 7).

9. Place (1) 6 ½” Fabric H square on the top left corner of (1) 12 ½” Fabric G square, right sides together (Fig. 14). Sew across the diagonal of the smaller square from the upper right corner to the lower left corner (Fig. 14). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle ¼” away from the sewn seam (Fig. 15).

7. Sew (1) 1 ¼” x 11” Fabric B strip to each side of (1) Unit 7 square. Sew (1) 1 ¼” x 12 ½” Fabric B strip to the top and bottom of the Unit 7 square to make (1) 12 ½” Block One square (Fig. 8).

8. Repeat Steps 6-7 and refer to Figures 9-13 for fabric identification and placement while using the Unit 2 through Unit 6 squares to make (1) 12 ½” block square for Block Two through Block Six.

10. Follow Figure 16 for the seam direction to add a 6 ½” Fabric H square to each of the remaining corners of the 12 ½” Fabric G square to make (1) 12 ½” Block Seven square (Fig. 17).

11. Repeat Steps 9-10 to make a second Block Seven square.

Fig. 7

Fig. 9

Fig. 11

Fig. 13

Fig. 14

Fig. 16

Fig. 10

Fig. 12

Fig. 15

Fig. 17

Fig. 8

Fig. 6

Fig. 2 Fig. 3 Fig. 4

Fig. 5

Summer Treats

12. Repeat Steps 9-10 and refer to Figures 18-19 for fabric identification, placement and seam direction to make (2) 12 ½” Block Eight squares and (2) 12 ½” Block Nine squares.

Fig. 18 Fig. 19

13. Sew together (1) Block One square, (1) Block Seven square and (1) Block Two square, in that order from left to right, to make Row One (Fig. 20).

14. Refer to Figure 20 for component identification and placement to make Row Two through Row Four.

15. Sew together the (4) Rows, lengthwise and in numerical order from top to bottom to make the 36 ½” x 48 ½” Center Block (Fig. 20).

12 7 45 83 9 968

Fig. 20

Quilt Top Assembly (Follow the Quilt Layout while assembling the quilt top.)

16. Sew (1) 2 ½” x 48 ½” Fabric D strip to each side of the Center Block. Sew (1) 2 ½” x 40 ½” Fabric D strip to the top and bottom of the Center Block.

17. Sew (1) 5 ½” x 52 ½” Fabric J strip to each side of the Center Block. Sew (1) 5 ½” x 50 ½” Fabric J strip to the top and bottom of the Center Block to make the quilt top.

18. Layer and quilt as desired.

19. Sew the (6) 2 ½” x WOF Fabric B strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

20. Bind as desired.

Quilt Layout

Summer Treats

100% Templates

Reversed for fusible applique

1” square for scale

Large Popsicle

Trace 2

Fabric C

Cone Trace 2 Fabric D

Popsicle Stick

Trace 10

Fabric D

Small Popsicle

Trace 6

(2) Fabric B

(2) Fabric C

(2) Fabric F

Ice Cream Trace 4

(2) Fabric E

(2) Fabric F

Summer Treats Page 7

100% Templates Reversed for fusible applique

1” square for scale

Eaten Popsicle #1

Trace 1

Fabric B

Eaten Popsicle #2

Trace 1

Fabric B

www.3wishesfabric.com

Fo ow us here to s m e

Fabric Needed

3 Wishes Fabric® Tiny Tots Collection

• 1 3⁄4 yds – Sweet Jungle (23055-WHT-FLN-D)

• 1 ½ yds – Tiny Tots Patch (23052-WHT-FLN-D)

Quilt

Finished Size: 49 ½ in x 51 ½ in (125.73 cm x 130.81 cm)

• 1 1⁄8 yd – Tiny Birds (23056-BLU-FLN-D) Includes Binding

• 3⁄4 yd – Tot Trot Stripe (23054-WHT-FLN-D)

• 1⁄4 yd – Mommy and Me (23053-WHT-FLN-D)

• 3 yds – Sweet Jungle (23055-WHT-FLN-D) for Backing

Not included in the 3 Wishes Fabric® Collection

• 1⁄4 yd – Solid White Flannel

Additional Supplies Needed:

• 58 in x 60 in (147.32 cm x 152.4 cm) Cotton batting

• Piecing and sewing thread

• Quilting and sewing supplies

• Even-feed foot (optional for quilting)

Featuring the Tiny Tots Collection by Lisa Perry Shipping to stores January 2025

Before You Begin

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a ¼ in (6.35mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric

Cutting

Use a rotary cutter and ruler to cut the size and number of squares and rectangles from each fabric listed below. Set aside remaining fabric for making the appliqués. Note: Check orientation of directional fabrics.

Sweet Jungle (23055-WHT-FLN-D) – 1 ¾ yd (160.02 cm x wof)

Cut 2 – 4 in x 43 ½ in (10.16 cm x 110.49 cm)

Cut 2 – 4 ½ in x 42 ½ in (11.43 cm x 107.95 cm)

Cut 1 – 20 in x 18 ½ in (50.8 cm x 46.99 cm)

Tiny Tots Patch (23052-WHT-FLN-D) – 1 ½ yd (137.16 cm x wof)

Fussy Cut 2 – 4 ½ in x 39 ½ in (11.43 cm x 100.33 cm)

Fussy Cut 2 – 3 ¾ in x 32 ½ in (9.5 cm x 82.55 cm) 4 ½ in x 39 ½ in

Mommy and Me (23053-MNT-FLN-D) – 1/4 yd (22.86 cm x wof) Cut 8 – 4

x 4

in (10.16 cm x 11.43 cm)

2 in x 23 in

2 in x 18 ½ in

2 in x 42 ½ in 2 in x 40 ½ in

Tiny Birds (23056-BLU-FLN-D) – 1 1/8 yd (102.87 cm x wof)

Cut 6 – 2 ½ in x wof (6.35 cm x wof) for Binding

Cut 2 – 2 in x 42 ½ in (5.08 cm x 107.95 cm)

Cut 2 – 2 in x 40 ½ in (5.08 cm x 102.87 cm)

Cut 2 – 2 in x 23 in (5.08 cm x 58.42 cm)

Cut 2 – 2 in x 18 ½ in (5.08 cm x 46.99 cm) 2 ½ in x wof

Sewing

Note: Check orientation of directional fabrics.

Tot Trot Stripe (23054-WHT-FLN-D) – 3/4 yd (68.58 cm x wof)

Cut 2 – 4 ½ in x 23 in (11.43 cm x 58.42 cm)

Cut 2 – 4 in x 21 ½ in (10.16 cm x 54.61 cm) 4 ½ in x 23 in 4 in x 21 ½ in

Solid White Flannel – 1/4 yd (22.86 cm x wof)

Cut 2 – 2 in x 33 in (5.08 cm x 83.82 cm)

Cut 2 – 2 in x 29 ½ in (5.08 cm x 74.93 cm) 2 in x 33 in 2 in x 29 ½ in

1. Place a Tiny Birds rectangle 2 in x 18 ½ in (5.08 cm x 46.99 cm) on each side of Sweet Jungle rectangle 20 in x 18 ½ in (50.8 cm x 46.99 cm) as shown in Diagram A. Pin, sew and press. Place a Tiny Birds rectangle 2 in x 23 in (5.08 cm x 58.42 cm) on the top and bottom. Pin, sew and press to create the Center Block measuring 23 in x 21 ½ in (58.42 cm x 54.61 cm).

Center Block

23 in x 21 ½ in (58.42 cm x 54.61 cm)

2. Place a Mommy and Me rectangle 4 in x 4 ½ in (10.16 cm x 11.43 cm) on each side of a Top Trot Strips rectangle 4 ½ in x 23 in (11.43 cm x 58.42 cm) as shown in Diagram B. Pin, sew and press to create the Inner Top Border measuring 4 ½ in x 30 in (11.43 cm x 76.2 cm). Repeat to make the Inner Bottom Border.

3. Place a Mommy and Me rectangle 4 in x 4 ½ in (10.16 cm x 11.43 cm)on each side of a Sweet Jungle rectangle 4 in x 43 ½ in (10.16 cm x 110.49 cm) as shown in Diagram C. Pin, sew and press to make the Outer Top & Bottom Border measuring 4 ½ in x 45 ¾ in (11.43 cm x 116.21 cm). Repeat to make the Outer Bottom Border.

4. Place a Turkey Trot Stripe rectangle 4 in x 21 ½ in (10.16 cm x 54.61 cm) on each side of the Center Block as shown in Diagram D. Pin, sew and press. Place the Inner Top and Bottom Borders on the top and bottom. Pin, sew and press to make the Center Block 2 measuring 29 ½ in x 30 in (74.93 cm x 76.2 cm).

5. Add Solid White Border:

Place a Solid White rectangle 2 in x 29 ½ in (5.08 cm x 74.93 cm) on each side of Center Block 2 as shown in Diagram E. Pin, sew and press. Place a Solid White rectangle 2 in x 33 in (5.08 cm x 83.82 cm) on the top and bottom. Pin, sew and press.

Add Patch Borders:

Place a Tiny Tots Patch rectangle 3 ¾ in x 32 ½ in (9.5 cm x 82.55 cm) on each side as shown in Diagram E. Pin, sew and press. Place a Tiny Tots Patch rectangle 4 ½ in x 39 ½ in (11.43 cm x 100.33 cm) on the top and bottom. Pin, sew and press to create Center Block 3 measuring 39 ½ in x 40 ½ in (100.33 cm x 102.87 cm).

Center Block 3

6. Add Solid White Border:

Place a Tiny Birds rectangle 2 in x 18 ½ in (5.08 cm x 46.99 cm) on each side of Center Block 3 as shown in Diagram F. Pin, sew and press. Place a Tiny Birds rectangle 2 in x 23 in (5.08 cm x 58.42 cm) on the top and bottom. Pin, sew and press.

Add Outer Borders:

Place a Sweet Jungle rectangle 4 ½ in x 42 ½ in (11.43 cm x 107.95 cm) on each side as shown in Diagram F. Pin, sew and press. Place an Outer Border 4 ½ in x 45 ¾ in (11.43 cm x 116.21 cm) on the top and bottom. Pin, sew and press to create the Quilt Top measuring 49 ½ in x 51 ½ in (125.73 cm x 130.81 cm).

Finishing

5. Remove the selvages from the Sweet Jungle Backing fabric. Cut one piece 40 ¼ in x 56 in (102.24 cm x 142.24 cm) and two pieces 16 ¼ in x 28 ¼ in (41.28 cm x 71.76 cm). Pin RST and sew the two smaller pieces on the short edges; press. Pin the two sections RST and sew along the long edges as shown in Diagram H. Press the seam open or to one side. The Backing should measure 56 in x 56 in (142.24 cm x 142.24 cm).

7. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

8. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

9. Binding – Follow Diagram I to make the Tiny Birds Binding. Remove selvages and sew the short ends of the six 2 ½ in (6.35 cm) x wof strips RST end to end at a 45° angle to make one continuous strip; press seams open. Press one short end ¼ in (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2 in (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

Finished Care Instructions

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low.

By Duncan MacDougal

Let's Celebrate Fabrics

Finished Quilt Size: 85” x 85” (215.90 cm x 215.90 cm)

in the Victory Garden Collection

Mason Jar Floral 22942-NVY-CTN-D

Star Splatter Blue 22943-BLU-CTN-D

Patriotic Pedals 22944-WHT-CTN-D

Big Bang 22945-NVY-CTN-D

Star Texture Red 22946-RED-CTN-D

Victory Garden 22947-BLU-CTN-D

Solid White

Let's Celebrate

Materials

1 ⅛ yards (1.03m) Mason Jar Floral (A)

22942-NVY-CTN-D

1 ⅜ yards (1.26m) Star Texture Red (B)

22946-RED-CTN-D

2 ⅛ yards (1.94m) Solid White (C)

1 yard (0.92m) Victory Garden (D)

22947-BLU-CTN-D

1 ½ yards (1.38m) Big Bang (E)*

22945-NVY-CTN-D

1 ¼ yards (1.15m) Star Splatter Blue (F)

22943-BLU-CTN-D

2 yards (1.83m) Patriotic Pedals (G)

22944-WHT-CTN-D

6 ⅛ yards (5.60m) Victory Garden (Backing)

22947-BLU-CTN-D

*Includes binding

Cutting Instructions

Please note: All strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

From the Mason Jar Floral (A), cut:

• (2) 14 ½” x WOF strips. Sub-cut (4) 14 ½” squares.

• (1) 2 ¾” x WOF strip.

• (3) 2” x WOF strips.

From the Star Texture Red (B), cut:

• (8) 3 ½” x WOF strips. From each strip cut (1) 3 ½” x 16 ½” strip and (1) 3 ½” x 22 ½” strip.

• (1) 2 ⅞” x WOF strip. Sub-cut (8) 2 ⅞” squares.

• (2) 2 ¾” x WOF strips.

• (2) 3 ½” x WOF strips. Sub-cut (16) 3 ½” squares.

From the Solid White (C), cut:

• (10) 1 ½” x WOF strips. From each strip cut (1) 1 ½” x 14 ½” strip and (1) 1 ½” x 24 ½” strip.

• (10) 1 ½” x WOF strips. From each strip (1) 1 ½” x 16 ½” strip and (1) 1 ½” x 22 ½” strip.

• (1) 2 ⅞” x WOF strip. Sub-cut (8) 2 ⅞” squares.

• (3) 2 ¾” x WOF strips.

• (3) 2” x WOF strips.

• (3) 3 ½” x WOF strips. Sub-cut (32) 3 ½” squares.

• (16) Template 5 triangles.

• (16) Template 7 triangles.

From the Victory Garden (D), cut:

• (2) 2 ¾” x WOF strips.

• (3) 6 ½” x WOF strips. Sub-cut (16) 6 ½” squares.

• (16) Template 1 triangles.

• (16) Template 3 triangles.

From the Big Bang (E), cut:

• (2) 3 ½” x WOF strips. From each strip cut (1) 3 ½” x 16 ½” strip and (1) 3 ½”x 22 ½” WOF strip.

• (2) 3 ½” x WOF strips. Sub-cut (16) 3 ½”squares.

• (16) Template 5 triangles.

• (16) Template 7 triangles.

• (9) 2 ½” x WOF strips for the binding.

From the Star Splatter Blue (F), cut:

• (4) 2” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2” x 72 ½” strips.

• (4) 2” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2” x 75 ½” strips.

• (32) Template 6 triangles.

From the Patriotic Pedals (G), cut:

• (1) 14 ½”square.

• (4) 5 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 5 ½” x 75 ½” strips.

• (5) 5 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 5 ½” x 85 ½” strips.

From the Victory Garden (Backing), cut:

• (2) 93” x WOF strips.

• (2) 9” x WOF strips.

• (1) 9” x 9” square.

Press, arrange and sew the (5) backing pieces as shown below.

Backing Layout

Let's Celebrate

Block Assembly

1. Sew (1) 1 ½” x 14 ½” Fabric C strip to each side of (1) 14 ½” Fabric A square. Sew (1) 1 ½” x 16 ½” Fabric C strip to the top and bottom of the Fabric A square to make (1) 16 ½” Unit 1 square (Fig. 1). Repeat to make (4) Unit 1 squares total.

2. Sew (1) 1 ½” x 14 ½” Fabric C strip to each side of (1) 14 ½” Fabric G square. Sew (1) 1 ½” x 16 ½” Fabric C strip to the top and bottom of the Fabric G square to make (1) 16 ½” Unit 2 square (Fig. 2).

5. Sew (1) 1 ½” x 22 ½” Fabric C strip to each side of (1) Unit 3 square. Sew (1) 1 ½” x 24 ½” Fabric C strip to the top and bottom of the Unit 3 square to make (1) 24 ½” Block One square (Fig. 5). Repeat to make (4) Block One squares total.

6. Sew (1) 1 ½” x 22 ½” Fabric C strip to each side of (1) Unit 4 square. Sew (1) 1 ½” x 24 ½” Fabric C strip to the top and bottom of the Unit 4 square to make (1) 24 ½” Block Two square (Fig. 6).

3. Sew (1) 3 ½” x 16 ½” Fabric B strip to each side of (1) Unit 1 square. Sew (1) 3 ½” x 22 ½” Fabric B strip to the top and bottom of the Unit 1 square to make (1) 22 ½” Unit 3 square (Fig. 3). Repeat to make (4) Unit 3 squares total.

4. Sew (1) 3 ½” x 16 ½” Fabric E strip to each side of (1) Unit 2 square. Sew (1) 3 ½” x 22 ½” Fabric E strip to the top and bottom of the Unit 2 square to make (1) 22 ½” Unit 4 square (Fig. 4).

7. Place (1) 2 ⅞” Fabric C square on top of (1) 2 ⅞” Fabric B square, right sides together. Draw a line across the diagonal of the top square (Fig. 7). Sew ¼” away from each side of the drawn diagonal line (Fig. 7). Cut the (2) squares apart on the drawn diagonal line (Fig. 8) to make (2) halfsquare triangles. Trim the half-square triangles to measure 2 ½” to make (2) Unit 5 squares (Fig. 9). Repeat to make (16) Unit 5 squares total.

8. Sew together (4) Unit 5 squares into a 2 x 2 matrix to make (1) 4 ½” Unit 6 square (Fig. 10). Repeat to make (4) Unit 6 squares total.

Fig.

Fig. 2

Fig. 6

Fig. 8 Fig. 9

Fig. 10

Fig. 7

Fig. 5

Fig. 3

Fig. 4

Let's Celebrate

9. Sew (1) 2 ¾” x WOF Fabric C strip to the left side of (1) 2 ¾” x WOF Fabric B strip lengthwise to make (1) Strip Set 1 (Fig. 11). Repeat to make a second Strip Set 1. Using the Template 2 provided, center and cut (16) Unit 7 triangles from the Strip Set 1’s (Fig. 11).

Set 1 make 2

10. Sew (1) 2 ¾” x WOF Fabric A strip to the left side of (1) 2 ¾” x WOF Fabric D strip lengthwise to make (1) Strip Set 2 (Fig. 12). Using the Template 1 provided, center and cut (16) Unit 8 triangles from the Strip Set 2 (Fig. 12).

11. Sew (1) 2 ¾” x WOF Fabric D strip to the left side of (1) 2 ¾” x WOF Fabric C strip lengthwise to make (1) Strip Set 3 (Fig. 13). Using the Template 3 provided, center and cut (16) Unit 9 triangles from the Strip Set 2 (Fig. 13).

12. Place (1) Unit 8 triangle on top of (1) Unit 7 triangle, right sides together, aligning the left sides (Fig. 14). Sew the (2) triangles together along the left side. Press the smaller triangle open.

13. Place (1) Unit 9 triangle on top of the Unit 7 triangle, right sides together, aligning the right sides (Fig. 15). Sew the (2) triangles together along the right side. Press the smaller triangle open to make (1) Unit 10 (Fig. 16). Trim the block to measure 4 ½” square.

14. Repeat Steps 12-13 to make (16) Unit 10 squares total.

Fig.

Let's Celebrate

15. Sew (1) 2” x WOF Fabric C strip to the left side of (1) 2” x WOF Fabric A strip lengthwise to make (1) Strip Set 4 (Fig. 17). Repeat to make (3) Strip Set 4’s total. Using the Template 4 provided, center and cut (16) Unit 11 diamonds from the Strip Set 4’s (Fig. 17).

Strip Set 4 make 3

19. Sew (1) Unit 12 square to each side of (1) Unit 10 square to make the top row. Repeat to make the bottom row. Sew (1) Unit 10 square to each side of (1) Unit 6 square to make the middle row. Sew together the (3) rows lengthwise to make (1) 12 ½” Unit 12 square (Fig. 21). Repeat to make (4) Unit 12 square total.

20. Place (1) 3 ½” Fabric B square on the top left corner of (1) 6 ½” Fabric D square, right sides together (Fig. 22). Sew across the diagonal of the smaller square from the upper right corner to the lower left corner (Fig. 22). Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle ¼” away from the sewn seam (Fig. 23).

16. Place (1) Fabric D Template 3 triangle on top of (1) Unit 11 diamond, right sides together, aligning the left sides (Fig. 18). Sew the (2) pieces together along the left side. Press the triangle open.

17. Place (1) Fabric D Template 1 triangle on top of the Unit 11 diamond, right sides together, aligning the right sides (Fig. 19). Sew the (2) pieces together along the right side. Press the triangle open to make (1) Unit 12 (Fig. 20). Trim the unit to measure 4 ½” square.

18. Repeat Steps 16-17 to make (6) Unit 12 squares total.

21. Follow Figure 24 for the seam direction to add (1) 3 ½” Fabric E square to the lower right corner and (1) Fabric C square to both the lower left and upper right corners of the 6 ½” Fabric D square to make (1) 6 ½” Unit 13 square (Fig. 25).

22. Repeat Steps 20-21 to make (16) Unit 13 squares total.

Fig. 17

Fig. 18

Fig. 19

Fig. 20

Fig. 21

Fig. 22

Fig. 24

Fig. 23

Fig. 25

Let's Celebrate

23. Place (1) Fabric E Template 5 triangle on top of (1) Fabric F Template 6 triangle, right sides together, aligning the left sides (Fig. 26). Sew the (2) pieces together along the left side. Press the smaller triangle open.

24. Place (1) Fabric C Template 7 triangle on top of the Fabric F triangle, right sides together, aligning the right sides (Fig. 27). Sew the (2) pieces together along the right side. Press the smaller triangle open to make (1) Unit 14 (Fig. 28). Trim the unit to measure 6 ½” square.

25. Repeat Steps 23-24 to make (16) Unit 14 squares total.

28. Sew (1) Unit 13 square to each end of (1) Unit 16 rectangle to make the top row. Repeat to make the bottom row. Sew (1) Unit 16 rectangle to each side of (1) Unit 12 square to make the middle row. Sew together the (3) rows lengthwise to make (1) 24 ½” Block Three square (Fig. 31). Repeat to make (4) Block Three squares total.

26 Fig. 27 Fig. 28

26. Repeat Steps 23-24 and refer to Figure 29 for fabric identification, placement and seam direction to make (16) 6 ½” Unit 15 squares total.

27. Sew together (1) Unit 15 square and (1) Unit 14 square to make (1) 6 ½” x 12 ½” Unit 16 rectangle (Fig. 30). Repeat to make (16) Unit 16 rectangles total. Block Three

29. Sew (1) Block One square to each side of (1) Block Three square to make Row One (Fig. 32). Repeat to make Row Three.

30. Sew (1) Block Three square to each side of the Block Two square to make Row Two (Fig. 32).

31. Sew together the (3) Rows, lengthwise and in numerical order from top to bottom, to make the 72 ½” x 72 ½” Center Block (Fig. 32).

Fig.

Fig. 30

Fig. 31

Fig.

Let's Celebrate

Quilt Top Assembly

(Follow the Quilt Layout while assembling the quilt top.)

32. Sew (1) 2” x 72 ½” Fabric F strip to each side of the Center Block. Sew (1) 2” x 75 ½” Fabric F strip to the top and bottom of the Center Block.

33. Sew (1) 5 ½” x 75 ½” Fabric G strip to each side of the Center Block. Sew (1) 5 ½” x 85 ½” Fabric G strip to the top and bottom of the Center Block.

34. Layer and quilt as desired.

35. Sew the (9) 2 ½” x WOF Fabric E strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

36. Bind as desired.

Center Block

Quilt Layout

Let's Celebrate

100% Templates

1” square for scale

Template 1 (T-1)

Template 4 (T-4)

Template 2 (T-2)

NOTE: All templates should be cut from a single layer of fabric.

Template 3 (T-3)

Let's Celebrate Page 10

NOTE: All templates should be cut from a single layer of fabric.

1” square for scale

100% Templates

Template 5 (T-5)

Template 6 (T-6)

Template 7 (T-7)