3 Wishes - Free Project Book 2021

Delivering January 2022 Look Featuring:DeliveringSpringBook2022January2022byBethAlbert

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! Featuring the Call of the Sea Collection by Josephine Wall Shipping to stores July 2021! page 1 Finished Size: 18 ½" x 18 ½" (46.99 cm x 46.99 cm) Makes six (6) pillows Fabric Needed 3 Wishes Fabric® Call of the Sea Collection • 1 Panel – Pillow Panel (17987-MLT-CTN-D) • 1 1/8 yds – Dolphins (17992-MLT-CTN-D) • 1 1/8 yds – Fish (17989-MLT-CTN-D) • 5/8 yd – Waves (17991-MLT-CTN-D) • 5/8 yd – Shells (17993-MLT-CTN-D) • ½ yd – Allover Merfairy (17988-BLU-CTN-D) • ½ yd – Coral Reef (17990-MLT-CTN-D) Additional Supplies Needed: • 6 bags – 16 oz. Polyester fiber fill,1 for each pillow • Piecing and sewing thread • Quilting and sewing supplies • Even-feed foot (optional for quilting) Pillows

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a ½" (1.27 cm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric Dolphins – 17992-MLT-CTN-D (1 1⁄8 yds x wof Cut 2 – 19 ½" x 19 ½" (49.53 cm x 49.53 cm) for Backing Cut 4 – 2 ½" x 19 ½" (6.35 cm x 49.53 cm) Cut 4 – 2 ½" x 16 ½" (6.35 cm x 41.91 cm) Pillow Panel – 17987-MLT-CTN-D Fussy Cut 4 – 16 ½" x 16 ½" (41.91 cm x 41.91 cm) 19 ½" x 19 ½" 2 ½" x 19 ½" 2 ½" x 16 ½" Waves – 17991-MLT-CTN-D (5 8 yd x wof / 57.15 cm x 106.68 cm) Cut 1 – 19 ½" x 19 ½" (49.53 cm x 49.53 cm) for Backing Cut 2 – 2 ½" x 19 ½" (6.35 cm x 49.53 cm) Cut 2 – 2 ½" x 16 ½" (6.35 cm x 41.91 cm) 19 ½" x 19 ½" 2 ½" x 19 ½" 2 ½" x 16 ½" Fish – 17989-MLT-CTN-D (1 1⁄8 yds x wof / 102.87 cm x 106.68 cm) Cut 2 – 19 ½" x 19 ½" (49.53 cm x 49.53 cm) for Backing Cut 4 – 2 ½" x 19 ½" (6.35 cm x 49.53 cm) Cut 4 – 2 ½" x 16 ½" (6.35 cm x 41.91 cm) 19 ½" x 19 ½" 2 ½" x 19 ½" 2 ½" x 16 ½"

www.3wishesfabric.com Cutting Use a rotary cutter and ruler to cut the size and number of squares and rectangles from each fabric listed below. Note: Place rectangles as shown on directional fabric.

Before You Begin

Cut 1 – 16 ½" x 16 ½" (41.91 cm x 41.91 cm)

Cut 1 – 16 ½" x 16 ½" (41.91 cm x 41.91 cm) 16 ½" x 19 ½" (49.53 cm x 49.53 cm)

Place a Waves rectangle (2 ½" x 16 ½" / 6.35 cm x 41.91 cm) on each side of the Fussy Cut Pillow Panel square (16 ½" x 16 ½" / 41.91 cm x 41.91 cm) as shown in Diagram A. Pin RST; sew and press. Place a Waves rectangle (2 ½" x 19 ½" / 6.35 cm x 49.53 cm) on the top and bottom. Pin RST; sew and press to make the Pillow Front (19 ½" x 19 ½" / 49.53 cm x 49.53 cm).

Sewing

www.3wishesfabric.com page 3

Shells – 17993-MLT-CTN-D (5 8 yd x wof / 57.15 cm x 106.68 cm)

16 ½" x 16 ½"

Note: ½" (1.27 cm) seam allowance

19 ½" x 19 ½"

½" 2 ½" x 19 ½" 2 ½" x 16 ½" 19

Coral Reef – 17990-MLT-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm)

Allover Merfairy – 17988-BLU-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm)

Cut 1 – 19 ½" x 19 ½" (49.53 cm x 49.53 cm) for Backing

A 1/2" (1.27 cm) seam allowance is suggested to allow for minor size variations on a printed panel. Sew from the back side along the outside edge of the thin turquoise border, which should be an approximate 1/2" (1.27 cm) seam allowance.

16 ½" x

Cut 2 – 2 ½" x 19 ½" (6.35 cm x 49.53 cm)

Cut 2 – 2 ½" x 16 ½" (6.35 cm x 41.91 cm)

www.3wishesfabric.com page 4

2. Place the Waves Backing square (19 ½" x 19 ½" / 49.53 cm x 49.53 cm) and the Pillow Front (19 ½" x 19 ½" / 49.53 cm x 49.53 cm) RST with edges even and pin. Sew around the sides leaving a 6" (15.24 cm) opening to turn as shown in Diagram B. Carefully clip corners and turn right side out. Push out corners and press edges flat.

Dia. B Clip corners 18 ½" x

Finished Care Instructions

Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Tumble dry low or lay flat to dry. 18 ½" cm x 46.99 cm)

Dia. D

(46.99

3. Insert fiber fill through opening as shown in Diagram C. Stuff firmly, but do not overstuff. Hand stitch opening closed.

4. Follow Steps 1-3 and Diagram D to make the remaining Pillows.

• yd – Fish (17989-MLT-CTN-D) Piecing and Binding

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! Featuring the Call of the Sea Collection by Josephine Wall Shipping to stores July 2021! page 1 Finished Size: 39 ½" x 47 ½" (100.3 cm x 120.65 cm) Fabric Needed 3 Wishes Fabric® Call of the Sea Collection

• 5/8 yd – Allover Merfairy (17988-BLU-CTN-D)

for

•

Even-feed foot

• 1/8 yd – Dolphins (17992-MLT-CTN-D)

• 1/4 yd – Coral Reef (17990-MLT-CTN-D)

Piecing and sewing thread

1

–

• (optional quilting)

• 5/8 yds – Coral Reef (17990-MLT-CTN-D) (Backing)

1

• (121.92 cm x 142.24

48" x 56"

•

for

cm) Cotton batting

• 3/4 yd – Shells (17993-MLT-CTN-D)

Quilting and sewing supplies

½

• 1/8 yd – Waves (17991-MLT-CTN-D)

Additional Supplies Needed:

Panel

Quilt

• Panel Merfairy (17994-MLT-CTN-D)

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a 1/4" (6.35mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric Merfairy Panel – 17994-MLT-CTN-D Fussy Cut 1 – 32 ½" x 40 ½" (85.22 cm x 102.87 cm) Fish – 17989-MLT-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm) Cut 5 – 2 ½" x wof (6.35 cm x 106.68 cm) for Binding Cut 1 – 1 ½" x 40 ½" (3.81 cm x 102.87 cm) Cut 1 – 1 ½" x 34 ½" (3.81 cm x 87.63 cm) Shells – 17993-MLT-CTN-D (¾ yd x wof / 68.58 cm x 106.68 cm) Cut 2 – 3" x 24 ½" (7.62 cm x 62.23 cm) 2 ½" x wof 1 ½" x 40 ½" 1 ½" x 34 ½" Coral Reef – 17990-MLT-CTN-D (¼ yd x wof / 22.86 cm x 106.68 cm) Cut 1 – 1 ½" x 40 ½" (3.81 cm x 102.87 cm) Cut 1 – 1 ½" x 34 ½" (3.81 cm x 87.63 cm) Cut 4 – 3" x 3" (7.62 cm x 7.62 cm) Waves – 17991-MLT-CTN-D (1⁄8 yd x wof / 11.43 cm x 106.68 cm) Cut 1 – 3" x 34 ½" (7.62 cm x 87.631cm)½" x 40 ½" 1 ½" x 34 ½" 3" x 34 ½" Dolphins – 17992-MLT-CTN-D (1 8 yd x wof / 11.43 cm x 106.68 cm) Cut 1 – 3" x 34 ½" (7.62 cm x 87.63 cm) 3" x 34 ½" 3" x 24 ½" Allover Merfairy – 17988-BLU-CTN-D (5⁄8 yd x wof / 57.15 cm x 106.68 cm) Cut 2 – 3" x 18 ½" (7.62 cm x 46.99 cm) 3" x 18 ½" x3"3"

www.3wishesfabric.com page 2 Cutting Use a rotary cutter and ruler to cut the size and number of squares and rectangles from each fabric listed below. Note: Fabrics are directional.

Before You Begin

Note: Pay close attention to the placement of directional fabrics while sewing.

4. Place a Coral Reef square (3" x 3" / 7.62 cm x 7.62 cm) on each side of the Dolphins rectangle (3" x 34 ½" / 7.62 cm x 87.63 cm) as shown in Diagram D. Pin RST, sew and press to make the Bottom Border (3" x 39 ½" / 7.62 cm x 100.3 cm).

www.3wishesfabric.com page 3

Sewing

2. Follow Step 1 and Diagram B to Make the Right Side Border (3" x 42 ½" / 7.62 cm x 107.95 cm).

3. Place a Coral Reef square (3" x 3" / 7.62 cm x 7.62 cm) on each side of the Waves rectangle (3" x 34 ½" / 7.62 cm x 87.63 cm ) as shown in Diagram C. Pin RST, sew and press to make the Top Border (3" x 39 ½" / 7.62 cm x 100.3 cm).

Dia. A + = 3" x 42 ½" (7.62 cm x 107.95 cm) Left Side Border Dia. B + = 3" x 42 ½" (7.62 cm x 107.95 cm) Right Side Border Dia. C + = 3" x 39 ½" (7.62 cm x 100.3 cm) Top Border + Dia. D + = 3" x 39 ½" (7.62 cm x 100.3 cm) Bottom Border +

1. Place an Allover Merfairy rectangle (3" x 18 ½" / 7.62 cm x 46.99 cm) and a Shells rectangle (3" x 24 ½" / 7.62 cm x 62.23 cm) as shown in Diagram A. Pin RST, sew across the short ends and press to make the Left Side Border (3" x 42 ½" / 7.62 cm x 107.95 cm).

www.3wishesfabric.com page 4

5. Place the Coral Reef and Fish strips (1 ½" x 40 ½" / 3.81 cm x 102.87 cm) on each side of the Fussy Cut Merfairy Panel (32 ½" x 40 ½" / 85.22 cm x 102.87 cm) as shown in Diagram E. Pin RST matching ends and middles, sew and press. Place the Coral Reef and Fish strips (1 ½" x 34 ½" / 3.81 cm x 87.63 cm) on the top and bottom as shown. Pin RST matching ends and middles, sew and press. The Quilt Center should measure 34 ½" x 42 ½" (87.63 cm x 102.87 cm).

Dia. E 34 ½" x 42 ½" (87.63 cm x 107.95 cm) Quilt Center + + + + Dia. F 39 ½" x 47 ½" (100.3 cm x 120.65 cm) Quilt Top + + + +

6. Place the Side Borders as shown in Diagram F. Note: Check that placement of border fabrics is correct. Pin RST matching ends and middles, sew and press. Place the Top and Bottom Borders as shown. Pin RST matching ends and middles, sew and press. The Quilt Top should measure 39 ½" x 47 ½" (100.3 cm x 120.65 cm).

Dia. H

10. Binding – Follow Diagram H to make Binding from the Fish fabric. Remove selvages and sew the short ends of the five 2 ½" (6.35 cm) x wof strips RST end to end at a 45° angle to make one continuous strip; press seams open. Press one short end 1/4" (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

Dia.

Finished Care Instructions

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low.

G

Backing 42" x 58 ½" (106.68 cm x 148.59 cm)

7. The Coral Reef Backing is enough to cover the length and width of the Quilt Top. If using a long arm machine to quilt, extra fabric basted onto Backing edges may be necessary.

Finishing

8. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

9. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

• 58" x 58" (147.32 cm x 147.32 cm) Cotton batting

• Quilting and sewing supplies

• ½ yd – Cat Patch (18036-BLU-CTN-D)

• 1 1/4 yds – White on White Leaf (18058-WOW-CTN-D)

Fabric collection ships to stores beginning July 2021.

• 1 yd – Floral (18038-COR-CTN-D) for Piecing and Binding

From the 3 Wishes Fabric® Painted Soul Collection

Fabric Needed

Fo

• ½ yd – White Cats (18039-MNT-CTN-D)

ow us here to s m e exciting projects and ideas! page 1

Additional Supplies Needed:

Finished Size: 50 ½" x 50 ½" (128.27 cm x 128.27 cm)

• 2 ½ yds – Plants Backing-Directional(18037-WHT-CTN-D)

• Even-feed foot (optional for quilting)

• Piecing and sewing thread

www.3wishesfabric.com

• 1/3 yd – Plants (18037-WHT-CTN-D)

Quilt

• 1/3 yd – Packed Cats (18040-MLT-CTN-D)

3 Wishes Fabric® Everyday is Caturday Collection

Any questions? Email us at help@askaquilter.com or call 888-912-7238.

Cut 14 – 2 ½" x 2 ½" (6.35 cm x 6.35 cm) ½" x 10 ½"

White on White Leaf – 18058-WOW-CTN-D (1 ¼ yds x wof / 114.3 cm x 106.68 cm) from the 3W Painted Soul Collection

10

Cut 16 – 2 ½" x 2 ½" (6.35 cm x 6.35 cm)

10 ½" x 10 ½" 2 ½" x 2 ½" 2 ½" x 2 ½"

10 ½" x 10 ½"

2

Cut 36 – 2 ½" x 2 ½" (6.35 cm x 6.35 cm)

Cut 48 – 5 ½" x 5 ½" (13.97 cm x 13.97 cm)

Before You Begin

Cut 12 – 2 ½" x 2 ½" (6.35 cm x 6.35 cm) ½" x 10 ½" ½" x 2 ½" 2 ½" x 2 ½" ½" x 2 ½"

10

5 ½" x 5 ½" 2 ½" x wof 10 ½" x 10 ½"

Plants – 18037-WHT-CTN-D (1⁄3 yd x wof / 30.48 cm x 106.68 cm)

www.3wishesfabric.com page 2

Cat Patch – 18036-BLU-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm)

Cut 3 – 10 ½" x 10 ½" (26.67 cm x 26.67 cm)

White Cats – 18039-MNT-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm)

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a 1/4" (6.35 mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric

Cut 6 – 2 ½" x wof (6.35 cm x 106.68 cm) for Binding

Cut 2 – 10 ½" x 10 ½" (26.67 cm x 26.67 cm)

Cut 3 – 10 ½" x 10 ½" (26.67 cm x 26.67 cm)

Cut 18 – 2 ½" x 2 ½" (6.35 cm x 6.35 cm)

Packed Cats – 18040-MLT-CTN-D (1⁄3 yd x wof / 30.48 cm x 106.68 cm)

Cutting

Floral – 18030-COR-CTN-D (1 yd x wof / 91.44 cm x 106.68 cm)

2

Cut 3 – 10 ½" x 10 ½" (26.67 cm x 26.67 cm)

Cut 2 – 10 ½" x 10 ½" (26.67 cm x 26.67 cm)

Use a rotary cutter and ruler to cut the size and number of squares and rectangles from each fabric listed below. Note: It will be helpful to group and label the 2 ½" x 2 ½" (6.35 cm x 6.35 cm) squares with the fabric name as they are cut.

Plants / X-BlockFloralUnit

¼" (6.35 mm)

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 10

3. Make the first X-Block using the following method. Place one Floral/Floral, one Floral/Packed Cats, one Cat Patch/Floral and one Cat Patch/Packed Cats X-Block Units (5 ½" x 5 ½" / 13.97 cm x 13.97 cm) in two rows as shown in Diagram C. Pin the pieces in each row RST, sew and press. Pin the rows RST matching seams, sew and press to make one X-Block R-1 C-2 (5 ½" x 5 ½" / 13.97 cm x 13.97 cm). Follow Step 4 to put the remaining X-Block Units together after they are placed in the Quilt layout to ensure correct placement.

+= =

Sewing

Cat Patch / Packed Cats X-Block Unit

Floral / White Cats X-Block Unit

White Cats / Packed Cats X-Block Unit

Dia. C Row 1 Row 2

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 2

1. Draw a diagonal line on the wrong side of a Floral square (2 ½" x 2 ½" / 6.35 cm x 6.35 cm). Place the square on one corner of a White on White Leaf square (5 ½" x 5 ½" / 13.97 cm x 13.97 cm), sew on the drawn line and trim 1/4" (6.35 mm) away from the sewn line; press. Repeat with the opposite corner to make a Floral/Floral X-Block Unit (5 ½" x 5 ½" / 13.97 cm x 13.97 cm). Make two.

10 ½" x 10 ½" (26.67 cm x 26.67 cm)

X-Block R-1 C-2

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 2

Plants / Packed Cats X-Block Unit

www.3wishesfabric.com page 3

Cat Patch / Plants X-Block Unit

2. Repeat the technique in Step 1 to make the following X- Block Units. Follow Diagram B using a White on White Leaf square (5 ½" x 5 ½" / 13.97 cm x 13.97 cm) with two print squares (2 ½" x 2 ½" / 6.35 cm x 6.35 cm) placed on opposite corners. Make the number shown in the diagram for each fabric combination. Tip: Pin a label with the Unit name as they are sewn.

Cat Patch / White Cats X-Block Unit

Dia. A

Cat Patch / Packed Cats Cat Patch / Floral + +

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 2

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 4

Cat Patch / Floral X-Block Unit

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 6

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 12

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 4

Floral / Packed Cats X-Block Unit

Dia. B

Draw wrong side Sew and cut Press

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 2

FloralFloral/

Floral / X-BlockFloralUnit

Floral / Packed Cats

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 4

Dia. D Row ½" x 50 ½" (26.67 cm x 128.27 cm)

1 Row 2 10

4. Lay out the three Floral, three Cat Patch, three White Cats, two Plants and two Packed Cats Print squares (10 ½" x 10 ½" / 26.67 cm x 26.67 cm) as shown in Diagram D. Next, place the individual X-Block Units (5 ½" x 5 ½" / 13.97 cm x 13.97 cm) in groups of four between the 10 ½" (26.67 cm) squares. Note: The triangle prints match the adjacent print square. The triangles facing the outside edges are Floral and match the Binding. Make the X-Blocks according to the method in Step 3 and return to their position in the Quilt layout. Pin the Print squares and Blocks in each row RST, sew and press. Each row should measure 10 ½" x 50 ½" (26.67 cm x 128.27 cm). Tip: Pin a label with the Row and Column number to each Print square and X-Block.

www.3wishesfabric.com page 4

Column 1 Column 2 Column 3 Column 4 Column 5 Floral / Packed Cats Floral / Packed Cats Floral / White Cats Floral / Packed Cats Floral / White Cats Cat Patch / Floral Cat Patch / Packed Cats + + + +R-1 C-1 R-1 C-3 R-1 C-5X-Block R-1 C-2 X-Block R-1 C-4 /FloralFloral Cat Patch / Packed Cats Cat Patch / Floral Cat Patch / Plants Floral / Packed/PlantsCatsFloralFloral / White Cats Cat Patch / White Cats + + +R-2 C-2 R-2 C-4X-Block R-2 C-1 X-Block R-2 C-3 + Floral / White Cats Cat Patch / Floral Floral / White Cats Cat Patch / Floral X-Block R-2 C-5 /FloralFloral Row 3 Row 4 /PlantsFloralCat Patch / Plants Cat Patch / Floral Plants / Packed Cats Cat Patch / Packed Cats Floral / White Cats /PlantsFloral + + + +R-3 C-1 R-3 C-3 R-3 C-5X-Block R-3 C-2 X-Block R-3 C-4 Cat Patch / White Cats Row 5 White Cats / Packed Cats Floral / White Cats Plants / Packed Cats Floral / White Cats /PlantsFloralCat Patch / Floral Floral / White Cats + + + +R-5 C-1 R-5 C-3 R-5 C-5X-Block R-5 C-2 X-Block R-5 C-4 Cat Patch / Floral /PlantsFloralFloral / White Cats Floral / White Cats Plants / Packed Cats White Cats / Packed Cats Cat Patch / Floral Cat Patch / Floral + + +R-4 C-2 R-4 C-4X-Block R-4 C-1 X-Block R-4 C-3 + Cat Patch / Packed PackedPlantsCats/Cats Cat Patch / /PlantsFloralFloralX-Block R-4 C-5 Floral / White Cats

www.3wishesfabric.com page 5 5. Place the rows as shown in Diagram E. Pin RST, sew and press. The Everyday is Caturday Quilt Top should measure 50 ½" x 50 ½" (128.27 cm x 128.27 cm). 50 ½" x 50 ½" (128.27 cm x 128.27 cm) Everyday is Caturday Quilt Top ++++ Dia. E Row 1 Row 2 Row 3 Row 4 Row 5

8. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

40 ¼" x 58" (102.24 cm x 147.32 cm)

18 ¼" x 29 ¼" (46.35 cm x 74.3 cm)

10. Binding – Follow Diagram G to make the Floral Binding. Remove selvages and sew the short ends of the six 2 ½" (6.35 cm) x wof strips RST end to end at a 45° angle to make one continuous strip; press seams open. Press one short end 1/4" (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

18 ¼" x 29 ¼" (46.35 cm x 74.3 cm)

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low.

Dia. G

Finishing

7. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

Dia. F

Backing (Directional) 58" x 58" (147.32 cm x 147.32 cm)

6. Remove the selvages from the Plants Backing fabric. Note: Fabric is directional. Cut one piece 40 1/4" x 58" (102.24 cm x 147.32 cm) and two pieces 18 1/4" x 29 1/4" (46.35 cm x 74.3 cm). Pin the two smaller pieces RST on the short edges and sew; press. Pin the two sections RST and sew the long edges as shown in Diagram F. Press seams open or to one side. The Backing should measure 58" x 58" (147.32 cm x 147.32 cm).

Finished Care Instructions

– Dog Patch

1/3

• Quilting and sewing

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! page 1 Finished Size: 50 ½" x 50 ½" (128.27 cm x 128.27 cm)

• yd Bulldog (18033-TRQ-CTN-D)

Needed

2 ½

• 1/4 yds (18058-WOW-CTN-D)

Quilt Fabric collection

1

Backing-Directional

• yd (18031-MLT-CTN-D)

½

147.32 cm) Cotton batting

•

½

• Even-feed foot (optional for quilting) ships

• yd (18034-GRN-CTN-D)

to stores beginning July 2021.

– Wildflowers

• yds (18035-WHT-CTN-D)

Wishes Fabric® A Dog’s Life Collection

1

58"

for Piecing and Binding

3

58"

– White on White Leaf

From

1/3

– Paw Prints

• yd (18035-WHT-CTN-D)

supplies

– French

• x (147.32 cm x

• yd (18032-BLU-CTN-D)

the 3 Wishes Fabric® Painted Soul Collection

Fabric

Piecing and sewing thread

Additional Supplies Needed:

– Dog Park

Cut 6 – 2 ½" x wof (6.35 cm x 106.68 cm) for Binding

Cut 12 – 2 ½" x 2 ½" (6.35 cm x 6.35 cm) ½" x 10 ½"

Use a rotary cutter and ruler to cut the size and number of squares and rectangles from each fabric listed below. Note: It will be helpful to group and label the 2 ½" x 2 ½" (6.35 cm x 6.35 cm) squares with the fabric name as they are cut.

White on White Leaf – 18058-WOW-CTN-D (1 ¼ yds x wof / 114.3 cm x 106.68 cm) from the 3W Painted Soul Collection

2

Cutting

2 ½" x 2 ½" 2

Cut 2 – 10 ½" x 10 ½" (26.67 cm x 26.67 cm)

10

Cut 14 – 2 ½" x 2 ½" (6.35 cm x 6.35 cm) ½" x 10 ½" ½" x 2 ½" ½" x 2 ½" ½" x 2 ½"

2

Dog Park – 18031-MLT-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm)

Cut 18 – 2 ½" x 2 ½" (6.35 cm x 6.35 cm) ½" x 5 ½" ½" x wof ½" x 10 ½" ½" x 2 ½"

Cut 3 – 10 ½" x 10 ½" (26.67 cm x 26.67 cm)

French Bulldog – 18033-TRQ-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm)

5

Wild owers – 18034-GRN-CTN-D (1 3 yd x wof / 30.48 cm x 106.68 cm)

Before You Begin

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a 1/4" (6.35 mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric

Cut 16 – 2 ½" x 2 ½" (6.35 cm x 6.35 cm) ½" x 10 ½"

Paw Prints – 18032-BLU-CTN-D (1 yd x wof / 91.44 cm x 106.68 cm)

Cut 3 – 10 ½" x 10 ½" (26.67 cm x 26.67 cm)

10

Cut 2 – 10 ½" x 10 ½" (26.67 cm x 26.67 cm)

Cut 48 – 5 ½" x 5 ½" (13.97 cm x 13.97 cm)

2

10

2

Cut 36 – 2 ½" x 2 ½" (6.35 cm x 6.35 cm)

10 ½" x 10 ½" 10

www.3wishesfabric.com page 2

Dog Patch – 18035-WHT-CTN-D (1⁄3 yd x wof / 30.48 cm x 106.68 cm)

2. Repeat the technique in Step 1 to make the following X- Block Units. Follow Diagram B using a White on White Leaf square (5 ½" x 5 ½" / 13.97 cm x 13.97 cm) with two print squares (2 ½" x 2 ½" / 6.35 cm x 6.35 cm) placed on opposite corners. Make the number shown in the diagram for each fabric combination. Tip: Pin a label with the Unit name as they are sewn.

Dog Park / French Bulldog X-Block Unit

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 4

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 12

Wild owers / Dog Park Paw Prints / Dog Park + += = +

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 4

C Row 1 Row 2 Paw Prints / Paw Prints

Dog Patch / Wild owers X-Block Unit

French Bulldog / Wild owers X-Block Unit

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 2

Paw Prints / Wild owers X-Block Unit

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 4

1. Draw a diagonal line on the wrong side of a Paw Prints square (2 ½" x 2 ½" / 6.35 cm x 6.35 cm). Place the square on one corner of a White on White Leaf square (5 ½" x 5 ½" / 13.97 cm x 13.97 cm), sew on the drawn line and trim 1/4" (6.35 mm) away from the sewn line; press. Repeat with the opposite corner to make a Paw Prints/Paw Prints X-Block Unit (5 ½" x 5 ½" / 13.97 cm x 13.97 cm). Make two.

Dog Park / Paw Prints X-Block Unit

Dia. B

Paw Prints / Wild owers X-Block

www.3wishesfabric.com page 3

placement.Dia.A

10 ½" x 10 ½" (26.67 cm x 26.67 cm) R-1 C-2

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 2

3. Make the first X-Block using the following method. Place one Paw Prints/Paw Prints, one Paw Prints/Wildflowers, one Paw Prints/ Dog Park and one Wildflowers/Dog Park X-Block Units (5 ½" x 5 ½" / 13.97 cm x 13.97 cm) in two rows as shown in Diagram C. Pin the pieces in each row RST, sew and press. Pin the rows together RST matching seams, sew and press to make one X-Block R-1 C-2 (10 ½" x 10 ½" / 26.67 cm x 26.67 cm). Follow Step 4 to put the remaining X-Block Units together after they are placed in the quilt layout to ensure correct

Dog Park / Dog Patch X-Block Unit

Paw Prints / French Bulldog X-Block Unit

Dia.

¼" (6.35 mm)

Dog Patch / Paw Prints X-Block Unit

Draw wrong side Sew and cut Press

Paw Prints / Paw Prints X-Block Unit 5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 2

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 6

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 10

Dog Park / Wild owers X-Block Unit

5 ½" x 5 ½" (13.97 cm x 13.97 cm) Make 2

Sewing

www.3wishesfabric.com page 4

Dia. D Row 1 Row 2 10

Column 1 Column 2 Column 3 Column 4 Column 5 Paw Prints / Wild owers Paw Prints / Wild owers Paw Prints /BulldogFrench Paw Prints / Wild owers Paw Prints /BulldogFrenchPaw Prints / Dog Park Wild owers / Dog Park + + + +R-1 C-1 R-1 C-3 R-1 C-5X-Block R-1 C-2 X-Block R-1 C-4 Paw Prints / Paw Prints Dog Park / Wild owers Dog Park / Paw Prints Dog Park / Dog Patch Paw Prints / Wild owers Dog Patch / Paw Prints Paw Prints /BulldogFrench Dog Park /BulldogFrench + + +R-2 C-2 R-2 C-4X-Block R-2 C-1 X-Block R-2 C-3 + Paw Prints /DogBulldogFrenchPark / Paw Prints Paw Prints / DogBulldogFrenchPark / Paw Prints X-Block R-2 C-5 Paw Prints / Paw Prints Row 3 Row 4 Dog Patch / Paw Prints Dog Park / Wild owers Paw Prints / Dog Prak Dog Patch / Wild owers Dog Park / Wild owers Paw Prints /BulldogFrench Wild owers / Paw Prints + + + +R-3 C-1 R-3 C-3 R-3 C-5X-Block R-3 C-2 X-Block R-3 C-4 Dog Park /BulldogFrench Row 5 BulldogFrench / Wild owers Paw Prints /BulldogFrench Dog Patch / Wild owers Paw Prints /BulldogFrench Dog Patch / Paw Prints Dog Park / Paw Prints Paw Prints /BulldogFrench + + + +R-5 C-1 R-5 C-3 R-5 C-5X-Block R-5 C-2 X-Block R-5 C-4 Dog Park / Paw Prints Dog Park / Paw Prints Paw Prints /BulldogFrench Paw Prints /BulldogFrench Dog Park / DogBulldogFrenchPatch / Dog Patch Dog Park / Paw Prints Dog Park / Paw Prints + + +R-4 C-2 R-4 C-4X-Block R-4 C-1 X-Block R-4 C-3 + Dog Park / Wild owers Dog Patch / Wild owers Dog Park / Paw Prints Dog Patch / Paw Prints X-Block R-4 C-5 Paw Prints /BulldogFrench

4. Lay out the three Paw Prints, three Dog Park, three French Bulldog, two Wildflowers and two Dog Park Print squares (10 ½" x 10 ½" / 26.67 cm x 26.67 cm) as shown in Diagram D. Next, place the individual X-Block Units (5 ½" x 5 ½" / 13.97 cm x 13.97 cm) in groups of four between the 10 ½" (26.67 cm) squares. Note: The triangle prints match the adjacent print square. The triangles facing the outside edges are Paw Prints and match the Binding. Make the X-Blocks according to the method in Step 3 and return to their position in the quilt layout. Pin the Print squares and Blocks in each row RST, sew and press. Each row should measure 10 ½" x 50 ½" ( 26.67 cm x 128.27 cm) . Tip: Pin a label with the Row and Column number to each Print square and X-Block. ½" x 50 ½" (26.67 cm x 128.27 cm)

www.3wishesfabric.com page 5 5. Place the rows as shown in Diagram E. Pin RST, sew and press. The A Dog’s Life Quilt Top should measure 50 ½" x 50 ½" (128.27 cm x 128.27 cm). 50 ½" x 50 ½" (128.27 cm x 128.27 cm) A Dog’s Life Quilt Top ++++ Dia. E Row 1 Row 2 Row 3 Row 4 Row 5

Dia. G

18 ¼" x 29 ¼" (46.35 cm x 74.3 cm)

7. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

9. Binding – Follow Diagram G to make the Paw Prints Binding. Remove selvages and sew the short ends of the six 2 ½" (6.35 cm) x wof strips RST end to end at a 45° angle to make one continuous strip; press seams open. Press one short end 1/4" (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

8. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

Finished Care Instructions

Finishing

6. Remove the selvages from the Dog Patch Backing fabric. Note: Fabric is directional. Cut one piece 40 1/4" x 58" (102.24 cm x 147.32 cm) and two pieces 18 1/4" x 29 1/4" (46.35 cm x 74.3 cm). Pin the two smaller pieces RST on the short edges and sew; press. Pin the two sections RST and sew the long edges as shown in Diagram F. Press seams open or to one side. The Backing should measure 58" x 58" (1473.32 cm x 147.32 cm).

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low.

Dia. F

Backing (Directional) 58" x 58" (147.32 cm x 147.32 cm)

40 ¼" x 58" (102.24 cm x 147.32 cm)

18 ¼" x 29 ¼" (46.35 cm x 74.3 cm)

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! Featuring the Don’t Forget to CollectionDream by Angela Nickeas Shipping to stores July 2021! page 1 Finished Size: 50 ½" x 50 ½" (128.27 cm x 128.27 cm) Fabric Needed 3 Wishes Fabric® Don’t Forget to Dream Collection • 1 yd – Night Sky (18078-BLK-FLN-D) for Piecing and Binding • � yd – Allover Moon (18076-GRY-FLN -D) • 5⁄8 yd – Hearts (18077-WHT-FLN-D) • 5⁄8 yd – Rainbow Hearts (18080-GRY-FLN-D) • 5⁄8 yd – Solid White Flannel • ½ yd – Hugs/Kisses (18079-PNK-FLN-D) • 2 ½ yds – Hearts Backing-Directional(18077-WHT-FLN-D) Additional Supplies Needed: • 59" x 59" (149.86 cm x 149.86 cm) Cotton batting • Piecing and sewing thread • Quilting and sewing supplies • Even-feed foot (optional for quilting) Quilt Fabric collection ships to stores beginning July 2021.

4

Fussy Cut 4 – 4 ½" x 42 ½"

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a ¼" (6.35mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric

Before You Begin

Rainbow Hearts – 18080-GRY-FLN-D (5⁄8 yd x wof / 57.15 cm x 106.68 cm)

Allover Moon – 18076-GRY-FLN-D (¾ yd x wof / 68.58 cm x 107.95 cm) (11.43 cm x 107.95 cm)

2 ½" x wof 18 ½" x 18 ½" 4 ½" x 42 ½" 4

Cut

Cutting

Cut 1

Night Sky – 18078-BLK-FLN-D (1 yd x wof / 91.44 cm x 106.68 cm) 6 – 2 ½" x wof (6.35 cm x 106.68 cm) for Binding – 18 ½" x 18 ½" (46.99 cm x 46.99 cm)

www.3wishesfabric.com page 2

Use a rotary cutter and ruler to cut the size and number of squares and rectangles from each fabric listed below. Note: Check orientation of directional fabrics.

Hearts – 18077-WHT-FLN-D (5 8 yd x wof / 57.15 cm x 106.68 cm) 4 – 4 ½" x 32 ½" (11.43 cm x 82.55 cm) ½" x 32 ½"

Cut

Cut 4 – 4 ½" x 22 ½" (11.43 cm x 57.15 cm) ½" x 22 ½"

2. Follow Step 1 and Diagram B using four Hugs/Kisses squares (4 ½" x 4 ½" / 11.43 cm x 11.43 cm) and two Hearts rectangles (4 ½" x 32 ½" / 11.43 cm x 82.55 cm) to make the Fifth Border Top and Bottom (4 ½" x 40 ½" / 11.43 cm x 102.87 cm).

1 ½" x 22 ½"

+ Dia.

4 ½" x 40 ½" (11.43 cm x 102.877 cm) 2

Note: Check orientation of directional fabrics.

Solid White Flannel (5⁄8 yd x wof / 57.15 cm x 107.95 cm)

Sewing

Cut 2 – 1 ½" x 20 ½" (3.81 cm x 52.07 cm)

Cut 2 – 1 ½" x 18 ½" (3.81 cm x 46.99 cm)

Cut 2 – 1 ½" x 32 ½" (3.81 cm x 82.55 cm)

1 ½" x 20 ½" 1 ½" x 18 ½"

Dia. A

Cut 2 – 1 ½" x 42 ½" (3.81 cm x 107.95 cm)

Make

1 ½" x 20 ½"

Cut 2 – 1 ½" x 30 ½" (3.81 cm x 77.47 cm)

1 ½" x 42 ½"

4 ½" x 4 ½"

Fifth Border Top and Bottom

Seventh Border Top and Bottom

4 ½" x 30 ½" (11.43 cm x 77.47 cm) Make 2 B

1 ½" x 40 ½"

Hugs/Kisses – 18079-PNK-FLN-D (½ yd x wof / 45.72 cm x 106.68 cm)

4 ½" x 50 ½" (11.43 cm x 128.27 cm) Make 2

1. Place a Hugs/Kisses square (4 ½" x 4 ½" / 11.43 cm x 11.43 cm) on each side of a Rainbow Hearts rectangle (4 ½" x 22 ½" / 11.43 cm x 57.15 cm) as shown in Diagram A. Pin RST, sew and press to make the Third Border Top (4 ½" x 30 ½" / 11.43 cm x 77.47 cm). Repeat to make the Third Border Bottom.

3. Follow Step 1 and Diagram C using four Hugs/Kisses squares (4 ½" x 4 ½" / 11.43 cm x 11.43 cm) and two Fussy Cut Allover Moon rectangles (4 ½" x 42 ½" / 11.43 cm x 107.95 cm) to make the Seventh Border Top and Bottom (4 ½" x 50 ½" / 11.43 cm x 128.27 cm).

Cut 2 – 1 ½" x 40 ½" (3.81 cm x 102.87 cm)

Cut 2 – 1 ½" x 22 ½" (3.81 cm x 57.15 cm)

Cut 12 – 4 ½" x 4 ½" (11.43 cm x 11.43 cm)

Dia. C

1 ½" x 32 ½"

Third Border Top and Bottom

1 ½" x 30 ½"

Cut 2 – 1 ½" x 20 ½" (3.81 cm x 52.07 cm)

www.3wishesfabric.com page 3

+ =

Sides: 2 – Fussy Cut Allover Moon rectangles (4 ½" x 42 ½" / 11.43 cm x 107.95 cm)

Top and Bottom: Seventh Border Top and Bottom (4 ½" x 50 ½" / 11.43 cm x 128.27 cm) Quilt 50 ½" x 50 ½" (128.27 cm x 128.27 cm)

Sixth Border

Second Border

Sides: 2 – Hugs/Kisses strips (1 ½" x 18 ½" / 3.81 cm x 46.99 cm)

Sides: 2 – Solid White strips (1 ½" x 20 ½" / 3.81 cm x 52.07 cm)

Top and Bottom: 2 – Solid White strips (1 ½" x 32 ½" / 3.81 cm x 82.55 cm) Quilt 32 ½" x 32 ½" (82.55 cm x 82.55 cm)

Seventh Border

Sides: 2 – Rainbow Hearts rectangles (4 ½" x 22 ½" / 11.43 cm x 57.15 cm)

Fourth Border

Fifth Border

Sides: 2 – Hugs/Kisses rectangles (4 ½" x 32 ½" / 11.43 cm x 82.55 cm)

Top and Bottom: 2 – Solid White strips (1 ½" x 22 ½" / 3.81 cm x 57.15 cm) Quilt 22 ½" x 22 ½" (57.15 cm x 57.15 cm)

Top and Bottom: 2 – Solid White strips (1 ½" x 42 ½" / 3.81 cm x 107.95 cm) Quilt 42 ½" x 42 ½" (107.95 cm x 107.95 cm)

First Border

Top and Bottom: 2 – Hugs/Kisses strips (1 ½" x 20 ½" / 3.81 cm x 52.07 cm) Quilt 20 ½" x 20 ½" (52.07 cm x 52.07 cm)

www.3wishesfabric.com page 4

Top and Bottom: Third Border Top and Bottom (4 ½" x 30 ½" / 11.43 cm x 77.47 cm) Quilt 30 ½" x 30 ½" (77.47 cm x 77.47 cm)

The Don’t Forget to Dream Quilt Top should measure 50 ½" x 50 ½" (128.27 cm x 128.27 cm).

Third Border

Sides: 2 – Solid White strips (1 ½" x 30 ½" / 3.81 cm x 77.47 cm)

4. Refer to Diagram D to place the Borders around the Night Sky square (18 ½" x 18 ½" / 46.99 cm x 46.99 cm). Sew each Border RST in the order listed. Pin, matching center and ends. Press seams as shown. Measure at each step to ensure the next border will fit. If one border is a little larger than the border it is being sewn to, pin well to ease the fullness and place the fullness on the bottom while sewing.

Sides: 2 – Solid White strips (1 ½" x 40 ½" / 3.81 cm x 102.87 cm)

Top and Bottom: Fifth Border Top and Bottom (4 ½" x 40 ½" / 11.43 cm x 102.87 cm) Quilt 40 ½" x 40 ½" (102.87 cm x 102.87 cm)

www.3wishesfabric.com page 5 Dia. D ++++++++++++++ Seventh BorderSixth Border Fifth BorderFourthThirdBorderBorderSecond Border First Border + + + + + + + +++ ++++ 50 ½" x 50 ½" (128.27 cm x 128.27 cm)

8. Binding – Follow Diagram F to make the Night Sky Binding. Remove selvages and sew the short ends of the six 2 ½" (6.35 cm) x wof strips RST end to end at a 45° angle to make one continuous strip; press seams open. Press one short end ¼" (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

Finishing

7. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low.

40 ¼" x 59" (102.24 cm x 149.86 cm)

19 ¼" x 29 ¾" (48.9 cm x 75.57 cm)

Backing (Directional) 59" x 59" (149.86 cm x 149.86 cm)

19 ¼" x 29 ¾" (48.9 cm x 75.57 cm)

Finished Care Instructions

5. Remove the selvages from the Hearts Backing fabric. Note: Fabric is directional. Cut one piece 40 ¼" x 59" (102.24 cm x 149.86 cm)and two pieces 19 ¼" x 29 �" (48.9 cm x 75.57 cm). Pin the two smaller pieces RST on the short edges and sew; press. Pin the two sections RST and sew the long edges as shown in Diagram E. Press seams open or to one side. The Backing should measure 59" x 59" (149.86 cm x 149.86 cm).

6. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

Dia. E

Dia. F

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! Featuring the Happy Fall Collection by Beth Albert Shipping to stores June 2021! page 1 Finished Size: 28 ¼" x 30 ¼" (71.76 cm x 76.84 cm) Fabric Needed 3 Wishes Fabric® Happy Fall Collection • 7/8 yd – Flowers (18120-TAN-CTN-D) • ½ yd – Black Solid • 3 /8 yd – Patchwork (18116-MLT-CTN-D) Additional Supplies Needed: • 6" x 9" (15.24 cm x 22.86 cm) Lightweight fusible web • 16 ¾" x 16 ¾" (42.55 cm x 42.55 cm) piece of paper/tissue (for Pattern) • Chopstick • Scotch Tape • Fabric and paper scissors • Piecing and sewing thread • Quilting and sewing supplies Apron

Read

Before You Begin

www.3wishesfabric.com page 2 Cutting Use a rotary cutter and ruler or scissors to cut the pieces from each fabric listed below. Note: Refer to instructions to create Apron Pattern and Pocket Appliqué.

all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a ¼" (6.35mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Backstitch at beginning and end of seams. Black Solid – (½ yd x wof / 45.72 cm x 106.68 cm) Cut 2 – 3" x 41" (7.62 cm x 104.14 cm) for Waist Ties Cut 1 – 3" x 24" (7.62 cm x 60.96 cm) for Neck Strap Cut 2 – 6 ½" x 15 ¾" (16.51 cm x 40.01 cm) for Pocket and Pocket Lining Flowers – 18120-TAN-CTN-D (7⁄8 yd x wof / 80.01 cm x 106.68 cm) Cut 1 – Apron on fold from pattern FoldonPlace Apron Pattern Patchwork – 18116-MLT-CTN-D (3 8 yd x wof / 34.29 cm x 106.68 cm) Fussy Cut 1 – 4 ¾" x 7 7 8" (12.07 cm x 20 cm) Pocket Appliqué 4 ¾" x 7 7⁄8" 3" x 41" 3" x 24" 6 ½" x 15 ¾"

paper. Measure 2 ½" (6.35 cm) from the top right edge of the square and make a mark. Draw a line to connect the mark and the lower right corner as shown in Diagram A. Lay out the pattern pieces with the square, overlapping the dotted lines and tape together. Cut out the pattern along the drawn and printed lines. 2. Fold the Flowers fabric wrong sides together so selvages meet. Place the Apron Pattern on the fold and cut one Apron 30" x 32 ½" (76.2 cm x 82.55 cm).Dia.A 2 ½" SectionApronSectionApron1 2 16 ¾" x 16 ¾" FoldonPlace Apron Pattern 8 ½" xx811"½"11" FoldonPlaceFold SelvagesApron Pattern Flowers Apron from Pattern 30" x 32 ½" (76.2 cm x 82.55 cm) Dia. B

www.3wishesfabric.com page 3

Sewing

1. of

Make an Apron Pattern from the two printed pattern pieces and a 16 ¾" x 16 ¾" (42.55 cm x 42.55 cm) square

4. Fold the Pocket (6 ½" x 15 ¾" / 16.51 cm x 40.01 cm) in half and lightly press a crease in both directions to mark the center. Center the Autumn Truck appliqué (4 ¾" x 7 7/8" / 12.07 cm x 20 cm) as shown in Diagram D. Fuse according to the manufacturer’s directions. Secure the outside edges with a machine buttonhole stitch or small zig-zag stitch (Tip: Test stitch length and stitch width on fabric scrap).

7⁄8" 4 ¾" x 7 7⁄8"

www.3wishesfabric.com page 4

3. Place Patchwork fabric with wrong side up. Center the adhesive side of the Lightweight fusible web rectangle (6" x 9" / 15.24 cm x 22.86 cm) over the Autumn Truck motif as shown in Diagram C. Fuse according to the manufacturer’s directions. Fussy cut a rectangle (4 ¾" x 7 7/8" / 12.07 cm x 20 cm) with the Autumn Truck motif centered. Remove paper backing.

5. Place the Pocket Lining (6 ½" x 15 ¾" / 16.51 cm x 40.01 cm) and the Pocket (6 ½" x 15 ¾" / 16.51 cm x 40.01 cm) RST with edges even as shown in Diagram E; pin. Sew around all edges leaving a 3" (7.62 cm) opening in the bottom for turning. Start and stop with a backstitch. Clip corners and turn right side out through opening. Use a chopstick to carefully push out corners; press. Topstitch ¼" (6.35 mm) from the top edge. The Pocket should measure 6" x 15 ¼" (15.24 cm x 38.74 cm). x 7 (12.07 cm x 20 cm)

6" x 9" Dia. B Fuse wrong side Fussy Cut Autumn Truck 6 ½" x 15 ¾" (16.51 cm x 40.01 cm) Dia. D Pocket Front Buttonhole Stitch Zigzag Stitch =+ 3" (7.62 cm) open to turn Dia. E 6" x 15 ¼" (15.24 cm x 38.74 cm) Pocket with Autumn Truck Appliqué Topstitch

4 ¾"

open

8. Fold one Waist Tie (3" x 41" / 7.62 cm x 104.14 cm) RST lengthwise as shown in Diagram H. Pin and sew around one end and long edge leaving the other end open to turn. Clip Corners and turn right side out; press. Topstitch around the sewn end and both sides to complete the Waist Tie 1 ¼" x 40 ¾" (3.18 cm x 103.51 cm). Make two. (3.18 cm x 59.69 cm)(7.62 cm) to turn

7. Fold the Neck Strap (3" x 24" / 7.62 cm x 60.96 cm) RST lengthwise as shown in Diagram G. Pin and sew around the open edges leaving a 3" (7.62 cm) opening to turn. Clip Corners and turn right side out, press. Topstitch around all sides, closing the opening to complete the Neck Strap 1 ¼" x 23 ½" (3.18 cm x 59.69 cm).

3"

www.3wishesfabric.com page 5

6. Center Pocket on Apron 4 ½" (11.43 cm) from the bottom edge as shown in Diagram F and pin. Sew around sides and bottom, closing the bottom opening. Sew a vertical line down the center of the appliqué to divide the Pocket into two sections.

Apron with PocketDia. StitchF to divide Pocket 4 ½" (11.43 cm) Fold Neck Strap 1 ¼" x 23 ½"

Dia. G Fold Leave open to turn Dia. H Apron Ties 1 ¼" x 40 ¾" (3.18 cm x 103.51 cm) Make 2

¼"Fold(6.35

¼"

wrongside mm)

wrongside TopstitchTopstitchTopstitchTopstitch ¼"Fold(6.35 mm) 1"Fold(2.54Foldcm)1"

Fold 1" (2.54 cm)

Press the top edge and sides an additional 1" (2.54 cm) to the wrong side and topstitch close to the inside fold.

¼"Fold(6.35

Fold (6.35 mm) (2.54 cm)

www.3wishesfabric.com page 6

9. Press each edge of the Apron ¼" (6.35 mm) to the wrong side.

Press the armholes and bottom edge another ¼" (6.35 mm) to the wrong side and topstitch close to the inside fold.

TopstitchTopstitch mm)

Dia. I

wrongside

1 – Attach unsewn edge of one Apron Tie to the back of the Apron as shown and sew using the hem line as a stitching guide.

2 – Fold Apron Tie back over the seam just sewn and sew along the edge of the apron. Repeat to attach the second Apron Tie.

The finished Apron should measure approximately 28 ¼" x 30" (71.76 cm x 76.2 cm).

10. Attach the Neck Strap as shown in Diagram J. Pin, then try on and adjust length if desired. Secure by sewing a 1" (2.54 cm) square through all layers.

Finished Care Instructions

Sewcm)Sew 1 - Sew 2 - Fold back and sew Dia. J

Machine wash in cold water; gentle cycle. Do not Bleach. Tumble dry low or hang to dry and press if needed. 28 ¼" x 30" (71.76 cm x 76.2

2SectionApronOverlap Fold

Scale: 1 square = 1" x 1" SectionPattern1

Apron Pattern – Section 1 (100% Scale)

Apron

Apron Pattern – Section 2 (100% Scale)

Scale: 1 square =

1" x 1" ApronSectionPattern21SectionApronOverlap 16–SquareApronOverlap¾"x16¾"

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! Featuring the Happy Fall Collection by Beth Albert Shipping to stores June 2021! page 1 Finished Size: 54 ½" x 54 ½" (138.43 cm x 138.43 cm) Fabric Needed 3 Wishes Fabric® Happy Fall Collection • 1 yd – Black Solid • 3/4 yd – Truck (18118-MLT-CTN-D) • 3/4 yd – Words (18119-BGE-CTN-D) • ½ yd – Patchwork (18116-MLT-CTN-D) • ½ yd – Wreath (18117-BGE-CTN-D) • ½ yd – Beige Solid • 3/8 yd – Flowers (18120-TAN-CTN-D) • 3 yds – Flowers (18120-TAN-CTN-D) for Backing-Directional Additional Supplies Needed: • 62" x 62" (157.48 cm x 157.48cm) Cotton batting • Piecing and sewing thread • Quilting and sewing supplies • Even-feed foot (optional for quilting) Quilt

Before You Begin

www.3wishesfabric.com page 2 Cutting Use a rotary cutter and ruler to cut the size and number of squares and rectangles from each fabric listed below.

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a ¼" (6.35mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric Black Solid – (1 yd x wof / 91.44 cm x 106.68 cm) Cut 12 – 7" x 7" (17.78 cm x 17.78 cm) Cut 12 – 6 ½" x 6 ½" (16.51 cm x 16.51 cm) Cut 2 – 1 ½" x 14 ½" (3.81 cm x 36.83 cm) Cut 2 – 1 ½" x 12 ½" (3.81 cm x 31.75 cm) Trucks – 18118-MLT-CTN-D (¾ yd x wof / 68.58 cm x 106.68 cm) Cut 6 – 2 ½" x wof (6.35 cm x 106.68 cm) for Binding Cut 4 – 6 ½" x 6 ½" (16.51 cm x 16.51 cm) Words – 18119-BGE-CTN-D (¾ yd x wof / 68.58 cm x 106.68 cm) Cut 16 – 6 ½" x 6 ½" (16.51 cm x 16.51 cm) Patchwork – 18116-MLT-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm) Fussy Cut 1 – 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Wreaths – 18117-BGE-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm) Cut 12 – 6 ½" x 6 ½" (16.51 cm x 16.51 cm) 7" x 7" 6 ½" x 6 ½" 6 ½" x 6 ½" 6 ½" x 6 ½" 6 ½" x 6 ½" 1 ½" x 14 ½" 1 ½" x 12 ½" 2 ½" x wof 12 ½" x 12 ½"

Draw

Center

18 ½" x 18 ½" (46.99 cm x 46.99 cm) Dia. B +++ + +++ + =

Cut 2 – 2 ½" x 14 ½" (6.35 cm x 36.83 cm)

¼"

1. Draw a diagonal line on the wrong side of a Beige Solid square (7" x 7" / 17.78 cm x 17.78 cm) as shown in Diagram A. Place on top of a Black Solid square (7" x 7" / 17.78 cm x 17.78 cm) with RST and sew ¼" (6.35 mm) away from the line on both sides. Cut on the drawn line; press. Two squares yield two Half-Square Triangle (HST) Units. Square up and trim slightly to make two Half-Square Triangle Units (6 ½" x 6 ½" / 16.51 cm x 16.51 cm). Make 24.

CutSew Press (6.35mm)

Dia. A wrong side

Note: Check orientation of directional designs.

Sewing

Half-Square Triangle Unit 6 ½" x 6 ½" (16.51 cm x 16.51 cm) Make 24 Block

Cut 12 – 7" x 7" (17.78 cm x 17.78 cm)

www.3wishesfabric.com page 3

Beige Solid (½ yd x wof / 45.72 cm x 106.68 cm)

7" x 7" 6 ½" x 6 ½" 2 ½" x 14 ½" 2 ½" x 18 ½"

Flowers – 18120-TAN-CTN-D (3⁄8 yd x wof / 34.29 cm x 106.68 cm)

Cut 4 – 6 ½" x 6 ½" (16.51 cm x 16.51 cm)

2. Place a Black Solid strip (1 ½" x 12 ½" / 3.81 cm x 31.75 cm) on each side of the Fussy Cut Patchwork square (12 ½" x 12 ½" / 31.75 cm x 31.75 cm) as shown in Diagram B. Pin RST, sew and press. Place a Black Solid strip (1 ½" x 14 ½" / 3.81 cm x 36.83 cm) on the top and bottom. Pin RST, sew and press. The Patchwork square with Black Borders should measure 14 ½" x 14 ½" (36.83 cm x 36.83 cm).

Place a Flowers rectangle (2 ½" x 14 ½" / 6.35 cm x 36.83 cm) on each side. Pin RST, sew and press. Place a Flowers rectangle (2 ½" x 18 ½" / 6.35 cm x 46.99 cm) on the top and bottom. Pin RST, sew and press. The Center Block should measure 18 ½" x 18 ½" (46.99 cm x 46.99 cm.

Cut 2 – 2 ½" x 18 ½" (6.35 cm x 36.83 cm)

Side Unit 1A Side Unit 1B 6 ½" x 18 ½" (16.51 cm x

www.3wishesfabric.com page 4

Make 2 Dia. D Side

cm) 6 ½" x 18 ½" (16.51 cm x 46.99 cm) Dia. C ++ = Side Unit 2 6

6

3. Place two HST Units and one Words square (6 ½" x 6 ½" / 16.51 cm x 16.51 cm) as shown in Diagram C. Pin RST, sew and press to make Side Unit 1A (6 ½" x 18 ½" / 16.51 cm x 46.99 cm). Repeat to make Side Unit 1B. Note: Check the orientation of the HST Units and print direction of the square.

Dia. E

5. Follow Step 3 and Diagram E using four HST Units and two Truck squares (6 ½" x 6 ½" / 16.51 cm x 16.51 cm) to make a Side Unit 3A and 3B (6 ½" x 18 ½" / 16.51 cm x 46.99 cm). Note: Check the orientation of the HST Units and print direction of the square. 46.99 ½" x 18 ½" (16.51 cm x 46.99 cm) Unit 3A Side Unit 3B ½" x 18 ½" (16.51 cm x 46.99 cm) ½" x 18 ½" (16.51 cm x 46.99 cm)

6

4. Follow Step 3 and Diagram D using four Words and two Black Solid squares (6 ½" x 6 ½" / 16.51 x 16.51 cm) to make two Side Unit 2’s (6 ½" x 18 ½" / 16.51 cm x 46.99 cm).

www.3wishesfabric.com page 5 6. Place Side Unit 1A, Side Unit 2, Side Unit 3A (6 ½" x 18 ½" / 16.51 cm x 46.99 cm), the Center Block (18 ½" x 18 ½" / 46.99 cm x 46.99 cm), and Side Unit 3B, Side Unit 2, Side Unit 3A (6 ½" x 18 ½" / 16.51 cm x 46.99 cm) as shown in Diagram F. Pin RST, sew and press to make Row 4 (18 ½" x 54 ½" / 46.99 cm x 138.43 cm). Note: Check the orientation of the HST Units and print direction of the squares. 7. Place two Flowers, two Black Solid, two Wreath, one Words squares and two HST Units (6 ½" x 6 ½" / 16.51 cm x 16.51 cm) as shown in Diagram G. Pin RST, sew and press to make Row 1 (6 ½" x 54 ½" / 16.51 cm x 138.43 cm). Note: Check the orientation of the HST Units and print direction of the squares. 8. Follow Step 7 and Diagram H using two Flowers, two Black Solid, two Wreath, one Words squares and two HST Units (6 ½" x 6 ½" / 16.51 cm x 16.51 cm) to make Row 7 (6 ½" x 54 ½" / 16.51 cm x 46.99 cm). 18 ½" x 54 ½" (46.99 cm x 138.43 cm) Center BlockSide Unit 1A Side Unit 1BSide Unit 2 Side Unit 2Side Unit 3A Row 4 Side Unit 3B + + + + + + = Dia. F 6 ½" x 54 ½" (16.51 cm x 138.43 cm) Row 1 + + + + + + ++ = Dia. G Dia. H 6 ½" x 54 ½" (16.51 cm x 138.43 cm) Row 7

11. Follow Step 7 and Diagram H using two Wreath, two Words, one Truck squares and four HST Units (6 ½" x 6 ½" / 16.51 cm x 16.51 cm) to make Row 3 (6 ½" x 54 ½" / 16.51 cm x 138.43 cm).

6 ½"

Row 2 Dia. I Dia. K 6 ½"

12. Follow Step 7 and Diagram L using two Wreath, two Words, one Truck squares and four HST Units (6 ½" x 6 ½" / 16.51 cm x 16.51 cm) to make Row 5 (6 ½" x 54 ½" / 16.51 cm x 138.43 cm). x 54 ½" (16.51 cm x 138.43 cm) x 54 ½" (16.51 cm x 138.43 cm) x 54 (16.51 cm x 138.43 cm) x 54 ½" (16.51 cm x 138.43 cm)

www.3wishesfabric.com page 6

9. Follow Step 7 and Diagram I using three Black Solid, two Wreath, two Words squares and two HST Units (6 ½" x 6 ½" / 16.51 cm x 16.51 cm) to make Row 2 (6 ½" x 54 ½" / 16.51 cm x 138.43 cm).

Row 3 Dia. J 6 ½"

Row 6 Dia. L 6 ½"

½"

Row 5

10. Follow Step 7 and Diagram J using three Black Solid, two Wreath, two Words squares and two HST Units (6 ½" x 6 ½" / 16.51 cm x 16.51 cm) to make Row 6 (6 ½" x 54 ½" / 16.51 cm x 46.99 cm).

www.3wishesfabric.com page 7 13. Place Rows 1-7 as shown in Diagram M, matching the centers, ends and seams. Pin RST, sew and press to make the Happy Fall Quilt Top (54 ½" x 54 ½" / 138.43 cm x 138.43 cm). 54 ½" x 54 ½" (138.43 cm x 138.43 cm) Happy Fall Quilt Top Dia. M Row 1 Row 2 Row 3 Row 4 Row 5 Row 6 Row 7 ++++++

14. Remove the selvages from the Flowers Backing fabric. Note: Fabric is directional. Cut two pieces 40 ¼" x 62" (102.24 cm x 157.48 cm), one piece 22 ¼" x 40 ¼" (56.52 cm x 102.24 cm) one piece 22 ¼" x 22 ¼" (56.52 cm x 56.52 cm. Pin RST and sew the two smaller pieces on the short edges; press. Pin the two sections RST and sew along the long edges as shown in Diagram N. Press the seam open or to one side. The Backing should measure 62" x 62" (157.48 cm x 157.48 cm).

16. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

15. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low.

40 ¼" x 62" (102.24 cm x 157.48 cm) 22 ¼" x 40 ¼" (56.52 cm x 102.24 cm) 22 ¼" x 22 ¼" (56.52 cm x 56.52 cm) Dia. O

Finishing

Finished Care Instructions

17. Binding – Follow Diagram O to make the Truck Binding. Remove selvages and sew the short ends of the six 2 ½" (6.35cm) x wof strips RST end to end at a 45° angle to make one continuous strip; press seams open. Press one short end ¼" (6.35mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

Dia. N

Backing 62" x 62" (157.48 cm x 157.48 cm)

• Piecing and sewing thread

• 1/2 yd – Words (18105-BGE-CTN-D)

• 4 – 16" x 16" (40.64 cm x 40.64 cm) Pillow forms

• 1 Panel – Home for the Holidays Panel (18104-MLT-CTN-D)

• 1/3 yd – Reindeer (18109-RED-CTN-D)

• Sewing supplies

• 1/2 yd – Snowman (18103-TRQ-CTN-D)

Fabric Needed

3 Wishes Fabric® Home for the Holidays Collection

• 1/2 yd – Mailbox (18102-BGE-CTN-D)

Any questions? Email us at help@askaquilter.com or call 888-912-7238.

Pillows

ow us here to s m e exciting projects and ideas! page 1

www.3wishesfabric.com

• 1/2 yd – Village (18101-BLK-CTN-D)

Fo

Additional Supplies Needed:

Finished Size: 16" x 16" (40.64 cm x 40.64 cm) Makes four (4) pillows

Cutting

www.3wishesfabric.com page 2

Do

all

Read instructions before beginning project. not pre-wash fabrics. fabrics with a dry iron on cotton setting before with right sides together (RST) unless otherwise noted. seams

cutting. Use a ¼" (6.35 mm) seam allowance and sew fabrics

a rotary cutter and ruler to cut the size and number of pieces from each fabric

Press

Snowman

Mailbox

in the direction of the arrows. wof = width of fabric Panel – 18104-MLT-CTN-D Fussy Cut 4 – 16 ½" x 16 ½" (41.91cm x 41.91cm) Reindeer – 18109-RED-CTN-D (1⁄3 yd x wof / 30.48 cm x 106.68 cm) Cut 16 – 4 ½" x 4 ½" (11.43 cm x 11.43 cm) 4 ½" x 4 ½"

– 18102-BGE-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm) Cut 1 – 16 ½" x 16 ½" (41.91 cm x 41.91 cm) 16 ½" x 16 ½"

– 18103-TRQ-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm) Cut 1 – 16 ½" x 16 ½" (41.91 cm x 41.91 cm) 16 ½" x 16 ½" Words – 18105-BGE-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm) Cut 1 – 16 ½" x 16 ½" (41.91 cm x 41.91 cm) 16 ½" x 16 ½" Village – 18101-BLK-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm) Cut 1 – 16 ½" x 16 ½" (41.91 cm x 41.91 cm) 16 ½" x 16 ½"

Before You Begin

Use listed below.

a

Gazebo Pillow Front

11.43

1. Refer to Diagram draw diagonal line on the wrong side of a Reindeer square (4 1/2" x 4 1/2" / 11.43 cm x 11.43 cm). Place the square on one corner of Fussy Cut House Panel square (16 1/2" x 16 1/2" / 41.91 cm x 41.91 cm), sew on the drawn line and trim ¼" (6.35 mm) from the sewn line; press. Repeat with the remaining three corners to make the House Pillow Front (16 1/2" x 16 1/2" / 41.91 cm x 41.91 cm).

A to

squares (4 /

16 ½" x 16 ½" (41.91 cm x 41.91 cm)

the

Fronts

Sewing

and

Follow Step 1 Diagram remaining Pillow using Reindeer 11.43 cm x cm),

B to make the

twelve

www.3wishesfabric.com page 3

the Fussy Cut Schoolhouse, Gazebo and Post Office Panel squares (16 Dia. A Sew and Cut House Pillow Front (6.35mm)¼" 16 ½" x 16 ½" (41.91 cm x 41.91 cm)

three

3. Place the House Pillow Front and Village squares (16 1/2" x 16 1/2" / 41.91 cm x 41.91 cm) RST as shown in Diagram C. Note: Check orientation of printed design. Pin and sew, leaving a 13" (33.02 cm) opening on the bottom. Clip the corners to reduce bulk.

Dia. C

www.3wishesfabric.com

Hand stitch opening closed

16" (40.64 cm) Pillow Form

Turn right side out. Gently push the corners out. Press flat. Insert a 16" (40.64 cm) pillow form.

Pin the open edges together and hand stitch the opening closed.

The finished House Pillow should measure approximately 16" x 16" (40.64 cm x 40.64 cm). 13" (33.02 cm)

Machine wash in cold water; gentle cycle. Do not bleach. Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye

Follow Step 3 and Diagram D using the Schoolhouse Pillow Front with the Snowman square, the Gazebo Pillow Front with the Words square and the Post Office Pillow Front with the Mailbox square (16 Schoolhouse, Gazebo and Post Office Pillows 16" x 16" (40.64 cm x 40.64 cm).

Finished Care Instructions

Additional Supplies Needed:

• Even-feed foot (optional for quilting)

• 2 3/8 yds – Mailbox (18102-BGE-CTN-D) for Backing

3 Wishes Fabric® Home for the Holidays Collection

• 1/3 yd – Mailbox (18102-BGE-CTN-D)

• 1/3 yd – Trees (18108-GRY-CTN-D)

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! Featuring the Home for the Holidays Collection by Beth Albert Shipping to stores June 2021! page 1 Finished Size: 48 ½" x 48 ½" (123.19 cm x 123.19 cm)

• 1/3 yd – Tartan (18107-MLT-CTN-D)

• 1 yd – Reindeer (18109-RED-CTN-D)

• 3/4 yd – Snowman (18103-TRQ-CTN-D)

• Piecing and sewing thread

• 1/3 yd – Words (18105-BGE-CTN-D)

Fabric Needed

• 1/3 yd – Trucks (18110-MLT-CTN-D)

• ½ yd – Patch (18106-MLT-CTN-D)

• 1/3 yd – Village (18101-BLK-CTN-D)

• 1 1/4 yds – White Solid

Quilt

• Quilting and sewing supplies

• 56" x 56" (142.24 cm x 142.24 cm) Cotton batting

cm)

24 – 4" x 4"

Cut 12 – 2 ½" x 8 ½"

arrows. wof

Cut 92.71

cm) Reindeer – 18109-RED-CTN-D (1 yd x wof / 91.44 cm x 106.68 cm) Cut 6 – 2 ½" x wof (6.35 cm x 106.68 cm) for Binding Cut 24 – 4" x 4" (10.16 cm x 10.16 cm) Cut 4 – 2 ½" x 2 ½" (6.35 cm x 6.35 cm) Snowman – 18103-TRQ-CTN-D (¾ yd x wof / 68.58 cm x 106.68 cm) Cut 6 – 6 ½" x 8 ½" (16.51 cm x 21.59 cm) Vertical Cut 6 – 8 ½" x 6 ½" (21.59 cm x 16.51 cm) Horizontal Patch – 18106-MLT-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm) Fussy Cut 1 – 8 ½" x 8 ½" (21.59 cm x 21.59 cm) Village – 18101-BLK-CTN-D (1 3 yd x wof / 30.48 cm x 106.68 cm) Cut 2 – 8 ½" x 8 ½" (21.59 cm x 21.59 cm) 4 ½" x 36 ½" 4 ½" x 28 ½" 4" x 4" 2 ½" x 8 ½" 2 ½" x wof 4" x 4" 2 ½" x 2 ½" 6 ½" x 8 ½" 8 ½" x 6 ½" 8 ½" x 8 ½" 8 ½" x 8 ½" Mailbox – 18102-BGE-CTN-D (1⁄3 yd x wof / 30.48 cm x 106.68 cm) Cut 1 – 8 ½" x 8 ½" (21.59 cm x 21.59 cm) 8 ½" x 8 ½"

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a 1/4" (6.35mm) and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the = width of

www.3wishesfabric.com page 2

White

seam allowance

and ruler to cut

fabric

cm)

Use rotary cutter the size and number of rectangles from each fabric listed below.

a

2 – 4 ½" x 28 ½"

Cut (10.16 cm x 10.16 cm) (6.35 cm x 21.59

squares and

2 – 4 ½" x 36 ½" (11.43 cm x

Cutting

Solid – (1 ¼ yds x wof / 114.3 cm x 106.68 cm)

Before You Begin

Cut (11.43 cm x 72.39

1. Place a Trees, a Village, a Tartan square (8 ½" x 8 ½" / 21.59 cm x 21.59 cm) and two White Solid rectangles (2 ½" x 8 ½" / 6.35 cm x 21.59 cm) as shown in Diagram A. Pin RST, sew and press to make Row 1 (8 ½" x 28 ½" / 21.59 cm x 72.39 cm).

3. Follow Step 1 and Diagram C using a Mailbox, a Trucks, a Village square (8 ½" x 8 ½" / 21.59 cm x 21.59 cm) and two White Solid rectangles (2 ½" x 8 ½" / 6.35 cm x 21.59 cm) to make Row 5 (8 ½" x 28 ½" / 21.59 cm x 72.39 cm).

Words – 18105-BGE-CTN-D (1⁄3 yd x wof / 30.48

2. Follow Step 1 and Diagram B using a Words, a Fussy Cut Patch, a Trees square (8 ½" x 8 ½" / 21.59 cm x 21.59 cm) and two White Solid rectangles (2 ½" x 8 ½" / 6.35 cm x 21.59 cm) to make Row 3 (8 ½" x 28 ½" / 21.59 cm x 72.39 cm).

www.3wishesfabric.com page 3

Note: Place fabric in the direction shown.

Sewing

cm x 106.68 cm) Cut 1 – 8 ½" x 8 ½" (21.59 cm x 21.59 cm) 8 ½" x 8 ½" Tartan – 18107-MLT-CTN-D (1 3 yd x wof / 30.48 cm x 106.68 cm) Cut 1 – 8 ½" x 8 ½" (21.59 cm x 21.59 cm) 8 ½" x 8 ½" Trees – 18108-GRY-CTN-D (1⁄3 yd x wof / 30.48 cm x 106.68 cm) Cut 1 – 8 ½" x 8 ½" (21.59 cm x 21.59 cm) 8 ½" x 8 ½" Trucks – 18110-MLT-CTN-D (1 3 yd x wof / 30.48 cm x 106.68 cm) Cut 1 – 8 ½" x 8 ½" (21.59 cm x 21.59 cm) 8 ½" x 8 ½" Dia. A 8 ½" x 28 ½" (21.59 cm x 72.39 cm) Row 1 + + + + = Dia. B 8 ½" x 28 ½" (21.59 cm x 72.39 cm) Row 3 8 ½" x 28 ½" (21.59 cm x 72.39 cm) Row 5 Dia. C

(2

Half-Square

6. Draw a diagonal line on the wrong side of a White Solid square (4" x 4" / 10.16 cm x 10.16 cm) as shown in Diagram F. Place on top of a Reindeer square (4" x 4" / 10.16 cm x 10.16 cm) RST and sew 1/4" (6.35 mm) away from the line on both sides. Cut on the drawn line; press. Two squares yield two Half-Square Triangle (HST) Units. Square up and trim slightly to make two Half-Square Triangle Units (3 ½" x 3 ½" / 8.89 cm x 8.89 cm). Make 48. 72.39 cm) (72.39 (6.35mm) Triangle Unit x 3 ½" (8.89 cm x 8.89 cm)

3 ½"

Make 2 Dia. D + + + + Rows 2 and 4 = Row 1 Row 2 Row 3 Row 4 Row 5 2 8 ½" x 28 ½"

2 ½" x 28 ½" (6.35 cm x

Make 48

5. Place Rows 1-5 as shown in Diagram E, matching ends and seams. Pin RST, sew and press to make the Quilt Center (28 ½" x 28 ½" / 72.39 cm x 72.39 cm).

4. Place three White Solid rectangles ½" x 8 ½" / 6.35 cm x 21.59 cm) two Reindeer squares (2 ½" x 2 ½" / 21.59 cm x 21.59 cm) as shown in Diagram D. Pin RST, sew and press to make Row (2 ½" x 28 ½" / 6.35 cm x 72.39 cm). Repeat to make Row 4.

and

2

cm x 72.39 cm) ++ Quilt Center ++ Dia. E Dia. F Draw wrong side CutSew Press ¼"

www.3wishesfabric.com page 4

Make

7. Place four HST Units (3 ½" x 3 ½" / 8.89 cm x 8.89 cm) as shown in Diagram G. Pin the Units in each row together, sew and press. Pin the rows together, matching the center seam, sew and press the seam open to make the Pinwheel Unit (6 ½" x 6 ½" / 16.51 cm x 16.51 cm). Make 12.

Make

= = + + + Dia. G Row 1 Row 2 Pinwheel Unit 6

www.3wishesfabric.com page 5

9. Place three Snowmen horizontal rectangles (8 ½" x 6 ½" / 21.59 cm x 16.51 cm) and four Pinwheel Units (6 ½" x 6 ½" / 16.51 cm x 16.51 cm) as shown in Diagram I. Note: Check the orientation of the Snowmen. Pin RST, sew and press to make the Pinwheel Top Border (6 ½" x 48 ½" / 16.51 cm x 123.19 cm). Repeat to make the Pinwheel Bottom Border. ½" x 6 ½" (16.51 cm x 16.51 cm) 12

= + + + + + + Dia. I Pinwheel Top and Bottom Borders 6

=++++ Dia. H

6 ½" x 36 ½" (16.51 cm x 92.71 cm) Make 2 ½" x 48 ½" (16.51 cm x 123.19 cm) 2

8. Place three Snowmen vertical rectangles (6 ½" x 8 ½" / 16.51 cm x 21.59 cm) and two Pinwheel Units (6 ½" x 6 ½" / 16.51 cm x 16.51 cm) as shown in Diagram H. Note: Check the orientation of the Snowmen. Pin RST, sew and press to make a Pinwheel Side Border (6 ½" x 36 ½" / 16.51 cm x 92.71 cm). Make 2.

SidePinwheelBorders

48 ½" x 48 ½" (123.19 cm x 123.19 cm) + + + +

Sides: 2 – Pinwheel Side Borders (6 ½" x 36 ½" / 16.51 cm x 92.71 cm)

www.3wishesfabric.com page 6

10. Refer to Diagram J to place the Borders around the Quilt Center (28 ½" x 28 ½" / 72.39 cm x 72.39 cm). Sew each Border RST in the order listed. Pin, matching middle and ends. Press seams as shown. Measure at each step to ensure the next border will fit. If one border is a little larger than the border it is being sewn to, pin well to ease the fullness and place the fullness on the bottom while sewing.

Home for the Holidays Quilt Top

Top and Bottom: 2 – White Solid rectangles (4 ½" x 36 ½" / 11.43 cm x 92.71 cm) Quilt Top 36 ½" x 36 ½" (92.71 cm x 92.71 cm).

Pinwheel Border

White Solid Border

Sides: 2 – White Solid rectangles (4 ½" x 28 ½" / 11.43cm x 72.39 cm)

Top and Bottom: 2 – Pinwheel Top and Bottom Borders (6 ½" x 48 ½" / 16.51 cm x 123.19 cm) Home for the Holidays Quilt Top 48 ½" x 48 ½" (123.19 cm x 123.19 cm). Dia. J

++++

14. Binding – Follow Diagram L to make the Reindeer Binding. Remove selvages and sew the short ends of the six 2 ½" (6.35 cm) x wof strips RST end to end at a 45° angle to make one continuous strip; press seams open. Press one short end 1/4" (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

40 ¼" x 56" (102.24 cm x 142.24 cm)

16 ¼" x 28 ¼" (41.28 cm x 71.73 cm)

Dia. L

low.Dia.K

16 ¼" x 28 ¼" (41.28 cm x 71.73 cm)

Backing 56" x 56" (142.24 cm x 142.24 cm)

Finishing

11. Remove the selvages from the Mailbox Backing fabric. Cut one piece 40 1/4" x 56 (102.24 cm x 142.24 cm) and two pieces 16 1/4" x 28 1/4" (41.28 cm x 71.73 cm). Pin RST and sew the two smaller pieces on the short edges; press. Pin the two sections RST and sew along the long edges as shown in Diagram K. Press the seam open or to one side. The Backing should measure 56" x 56" (142.24 cm x 142.24 cm).

12. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

13. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

Finished Care Instructions

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! Featuring the Joy Blooms Collection by Bethany Joy Shipping to stores July 2021! page 1 Finished Size: 39 ½" x 48 ½" (100.3 cm x 123.19 cm) Fabric Needed 3 Wishes Fabric® Joy Blooms Collection • 1 Panel – Bloom Panel (17299-MLT-CTN-D) • 7/8 yd – Expressions (17301-BLK-CTN-D) for Piecing and Binding • 1/4 yd – Hearts (17298-MLT-CTN-D) • 1/4 yd – Watercolor (17300-MLT-CTN-D) • 1/4 yd – Tossed Posies (17302-TRQ-CTN-D) • 1 5/8 yds – Sunflowers (17297-MLT-CTN-D) Backing From the 3 Wishes Fabric ® Painted Soul Collection • ½ yd – White on White Leaf (18058-WOW-CTN-D) Additional Supplies Needed: • 48" x 57" (121.92 cm x 144.78 cm) Cotton batting • Piecing and sewing thread • Quilting and sewing supplies • Even-feed foot (optional for quilting) Quilt

www.3wishesfabric.com page 2 Cutting Use a rotary cutter and ruler to cut the size and number of squares and rectangles from each fabric listed below.

Before You Begin

all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a 1/4" (6.35 mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric Bloom Panel – 17299-MLT-CTN-D Fussy Cut 5 – 9 ½" x 12 ½" (24.13 cm x 31.75 cm) 2 ½" x wof 9 ½" x 12 ½" Expressions – 17301-BLK-CTN-D (7⁄8 yd x wof / 80.01 cm x 106.68 cm) Cut 5 – 2 ½" x wof (6.35 cm x 106.68 cm) for Binding Cut 4 – 9 ½" x 12 ½" (24.13 cm x 31.75 cm)

Read

on White Leaf – 18058-WOW-CTN-D (½ yd x wof / 45.72 cm x 106.68 cm) from the 3Wishes Painted Soul Collection Cut 24 – 3 ½" x 3 ½" (8.89 cm x 8.89 cm) Cut 6 – 3 ½" x 12 ½" (8.89 cm x 31.75 cm) 3 ½" x 3 ½" Hearts – 17298-MLT-CTN-D (¼ yd x wof / 22.86 cm x 106.68 cm) Cut 12 – 3 ½" x 3 ½" (8.89 cm x 8.89 cm) 3 ½" x 3 ½" Tossed Posies – 173028-MLT-CTN-D (¼ yd x wof / 22.86 cm x 106.68 cm) Cut 12 – 3 ½" x 3 ½" (8.89 cm x 8.89 cm) 3 ½" x 3 ½" Watercolor – 17300-MLT-CTN-D (¼ yd x wof / 22.86 cm x 106.68 cm) Cut 2 – 3 ½" x 42 ½" (8.89 cm x 107.95 cm) 3 ½" x 42 ½" 3 ½" x 12 ½"

White

1. Place six White on White Leaf, three Hearts and two Tossed Posies squares (3 ½" x 3 ½" / 8.89 cm x 8.89 cm) as shown in Diagram A. Pin RST, sew and press to make one Horizontal Sashing strip (3 ½" x 33 ½" / 8.89 cm x 85.09 cm). Make four.

Make

Top and Bottom Borders ½" x 33 ½" (31.75 cm x 85.09 cm)

Tip: Chain piecing will save time and thread. Feed pieces under the presser foot in a continuous manner without cutting threads between each piece. Start with a scrap to keep the machine from “eating” the beginning of the first patchwork piece. Start stitching midway down on a scrap piece of fabric folded in half while continuing to chain piece onto the first set of patchwork pieces. End in the middle of a scrap which will be the next scrap starter.

Sewing

www.3wishesfabric.com page 3

+ = 3

scrapscrap A ½" x 33 ½" (8.89 cm x 85.09 cm) 4

Row 1

3. Place two White on White Leaf rectangles (3 ½" x 12 ½" / 8.89 cm x 31.75 cm), two Fussy Cut Panels and one Expressions rectangles (9 ½" x 12 ½" / 24.13 cm x 31.75 cm) as shown in Diagram C. Pin RST, sew and press to make Row 1 (12 ½" x 33 ½" / 31.75 cm x 85.09 cm).

2. Place a Tossed Posies square (3 ½" x 3 ½" / 8.89 cm x 8.89 cm) on each side of a Horizontal Sashing made in Step 1 (3 ½" x 33 ½" / 8.89 cm x 85.09 cm) as shown in Diagram B. Pin RST, sew and press to make the Top Border (3 ½" x 39 ½" / 8.89 cm x 100.33 cm). Repeat to make the Bottom Border.

Dia.

Make

Horizontal Sashing ½" x 39 ½" (8.89 cm x 100.33 cm) 2

+ + + + + + + + + + = 3

Dia. C + + + + 12

4. Place two White on White Leaf rectangles (3 ½" x 12 ½" / 8.89 cm x 31.75 cm), one Fussy Cut Panel and two Expressions rectangles (9 ½" x 12 ½" / 24.13 cm x 31.75 cm) as shown in Diagram D. Pin RST, sew and press to make Row 2 (12 ½" x 33 ½" / 31.75 cm x 85.09 cm).

Place two Horizontal Sashing strips (3 ½" x 33 ½" / 8.89 cm x 85.09 cm) and Rows 1-3 (12 ½" x 33 ½" / 31.75 cm x 85.09 cm) as shown in Diagram F. Pin RST matching ends and seams, sew and press to make the Quilt Center (33 ½" x 42 ½" / 85.09 cm x 107.95 cm). x 33 (31.75 cm x 85.09 cm) x 42 ½" (45.09 cm x 107.95 cm)

5. Place two White on White Leaf rectangles (3 ½" x 12 ½" / 8.89 cm x 31.75 cm), two Fussy Cut Panels and one Expressions rectangles (9 ½" x 12 ½" / 24.13 cm x 31.75 cm) as shown in Diagram E. Pin RST, sew and press to make Row 3 (12 ½" x 33 ½" / 31.75 cm x 85.09 cm).

+ Dia. D + + + + 12 ½"

½"

www.3wishesfabric.com page 4

Row 3 Dia. E 33 ½"

Quilt Center Dia. F Row HorizontalHorizontal1SashingRow2SashingRow3

9. Press finished Quilt Top and Backing. Tape the Backing, side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

Dia. G

Finishing

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low. 39 ½" x 48 ½" (100.33 cm x 123.19 cm)

10. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

11. Binding – Follow Diagram H to make the Expressions Binding. Remove selvages and sew the short ends of the five 2 ½" (6.35 cm) x wof strips RST end to end at a 45° angle to make one continuous strip; press seams open. Press one short end 1/4" (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

7. Place a Watercolor rectangle (3 ½" x 42 ½" / 8.89 cm x 107.95 cm) on each side of the Quilt Center (33 ½" x 42 ½" / 85.09 cm x 107.95 cm) as shown in Diagram G. Pin RST matching center and ends, sew and press. Place the Top and Bottom borders as shown; pin RST, matching ends and seams, sew and press to make the Joy Blooms Quilt Top (39 ½" x 48 ½" / 100.33 cm x 123.19 cm).

8. The Sunflowers (1 5/8 yards / 148.59 cm) Backing is enough to cover the length and width of the top. If using a long arm machine to quilt, extra fabric basted onto Backing edges may be necessary.

Dia. H

Finished Care Instructions

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! Featuring the My Happy Place Collection by Connie Haley Shipping to stores July 2021! page 1 Finished Size: 32 ½" x 32 ½" (82.55 cm x 82.55 cm) Fabric Needed 3 Wishes Fabric® My Happy Place Collection • 1 Panel – Camper Panel (18043-GRN-CTN-D) • 3 ⁄4 yard – Chairs (18041-TRQ-CTN-D) • 5⁄8 yard – Mountains (18045-MLT-CTN-D) for Piecing and Binding • ¼ yard – Colorburst (18042-MLT-CTN-D) • ¼ yard – Plaid (18044-MLT-CTN-D) • 1 ¼ yards – Campers (18046-WHT-CTN-D) Backing-Directional Additional Supplies Needed: • 40" x 40" (101.6 cm x 101.6 cm) Cotton batting • Piecing and sewing thread • Quilting and sewing supplies • Even-feed foot (optional for quilting)

Camper Panel (18043-GRN-CTN-D) 1 Panel Fussy Cut 1 - 20 ½" x 20 ½" (52.07 cm x 52.07 cm) Chairs (18041-TRQ-CTN-D) 3 4 Yard Cut 2 - 4 ½" x 24 ½" (11.43 cm x 62.23 cm) vertical Cut 2 - 4 ½" x 24 ½" (11.43 cm x 62.23 cm) horizontal Cut 1 - 9" x 33" (22.86 cm x 83.82 cm) Hanging Sleeve (optional) 2 ½" x wof 4 ½" x 24 ½"9" x 33""24x"½4½

Use a rotary cutter and acrylic ruler to cut the number of pieces from each fabric listed below.

www.3wishesfabric.com page 2

Before You Begin

Cutting

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a ¼" (6.35 mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric

5∕8 Yard Cut 4

1∕2" x

2" x 20 1 2" (5.08 cm x 52.07 cm) Cut 2 - 2" x 23 1 2" (5.08 cm x 59.69 cm) Colorburst (18042-MLT-CTN-D) 1∕4 Yard Cut 2 - 1" x 23 1 2" (2.54 cm x 59.69 cm) Cut 2 - 1" x 24 1 2" (2.54 cm x 62.23 cm) 2" x 20 ½" 2" x 23 ½" 2½" x wof Plaid (18044-MLT-CTN-D) 1∕4 Yard Cut 4 - 4 1∕2" x 4 1∕2" (11.43 cm x 11.43 cm) 4 ½" x 4 ½" 1" x 24 ½" 1" x 23 ½" Dia. A Top and Bottom Chairs Border 4 ½" x 32 ½" (11.43 cm x 82.55 cm) + + =

www.3wishesfabric.com page 3

2. Refer to Diagram B to place the Borders around the Fussy Cut Camper Panel square (20 ½” x 20 ½” / 52.07 cm x 52.07 cm). Sew each Border RST in the order listed. Pin matching center and ends. Press seams as shown. Measure at each step to ensure the next border will fit. If one border is a little larger than the border it is being sewn to, pin well to ease the fullness and place the fullness on the bottom while sewing. The My Happy Place Wall Hanging Top should measure 32 ½” x 32 ½” (82.55 cm x 82.55 cm).

Sewing

Note: Check orientation of directional fabrics.

Mountains (18045-MLT-CTN-D) - 2 wof (6.35 cm x wof) -

1. Place a Plaid square (4 ½” x 4 ½” / 11.43 cm x 11.43 cm) on each side of a horizontal Chairs rectangle (4 ½” x 24 ½” / 11.43 cm x 62.23 cm) as shown in Diagram A. Pin RST, sew and press to make the Top Chairs Border (4 ½” x 32 ½” / 11.43 cm x 82.55 cm). Repeat to make the Bottom Chairs Border.

Binding Cut 2

Sides: 2 – Colorburst strips (1” x 23 ½” / 2.54 cm x 59.69 cm)

Wall Hanging should measure 23 ½” x 23 ½” (59.69 cm x 59.69 cm)

Wall Hanging

Finished Wall Hanging should measure 32 ½” x 32 ½” (82.55 cm x 82.55 cm)

Colorburst Border

Top and Bottom: 2 – Mountain strips (2” x 23 ½” / 5.08 cm x 59.69 cm)

Top and Bottom: 2 – Colorburst strips (1” x 24 ½” / 2.54 cm x 62.23 cm)

5. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Wall Hanging Top.

Wall Hanging

3. The Campers (Directional - 1 ¼ yards / 114.3 cm) Backing is enough to cover the length and width of the Top. If using a long arm machine to quilt, extra fabric basted onto backing edges may be necessary.

Sides: 2 – Vertical Chairs rectangles (4 ½” x 24 ½” / 11.43 cm x 62.23 cm)

My Happy Place Wall Hanging Top

Top and Bottom: Top and Bottom Chairs Borders (4 ½” x 32 ½” / 11.43 cm x 82.55 cm)

4. Press finished Wall Hanging Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Wall Hanging Top (right side up). Baste the layers together with safety pins. Quilt as desired.

www.3wishesfabric.com page 4

Chairs Border

Dia. B

Sides: 2 – Mountains strips (2” x 20 ½” / 5.08 cm x 52.07 cm)

Wall Hanging should measure 24 ½” x 24 ½” (62.23 cm x 62.23 cm)

Mountains Border

Wall Hanging

Finishing

6. Binding – Follow Diagram C to make the Mountains Binding. Remove selvages and sew the short ends of the four 2 ½" x wof (6.35 cm x wof) strips RST end to end at a 45˚ angle to make one continuous strip; press seams open. Press one short end ¼" (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Wall Hanging Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

32 ½"" x 32 ½" (82.55 cm x 82.55 cm) ++ Dia. C

Fold ¼" ¼" ¼" Fold Fold Dia. E My Happy Place Wall Hanging Top Edge ½" /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// ///////////////// ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Center the seam; press open. Lightly press flat.

Finished Care Instructions

www.3wishesfabric.com page 5

8. Place the Hanging Sleeve on the back of the Wall Hanging approximately ½” (12.7 mm) from the top edge of the Binding with the seam against the backing as shown in Diagram E. Pin and sew in place by hand. Fold the top edge so it meets the binding (this forms a small pleat to allow room for a hanging device). Flatten the sleeve. Pin and sew the bottom edge by hand.

4

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low. x 32" (22.86 cm x 81.28 cm) ¼" x 32" (10.80 cm x 81.28 cm)

7. Hanging Sleeve (optional) – To hem the short ends, fold the edges of the Chairs rectangle (9” x 33” / 22.86 cm x 83.82 cm) ¼” (6.35 mm) to the wrong side and press, then fold ¼” (6.35 mm) again to enclose the edge of the fabric. Stitch close to the inner fold with a scant ¼” (6.35 mm) seam allowance as shown in Diagram D.

Dia. D 9"

Fold in half with wrong sides together, pin and sew a ¼” (6.35 mm) seam.

•

2 ½ yds– White on White Leaf (18058-WOW-CTN-D)

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! Featuring the Painted Soul Collection by Lisa Whitebutton Shipping to stores July 2021! page 1 Finished Size: 64 ½" x 77 ½" (163.83 cm x 196.85 cm) Fabric Needed 3 Wishes Fabric® Painted Soul Collection

5/8 yd – Lead Floral (18057-MLT-CTN-D)

• (18057-MLT-CTN-D) (Backing)

Quilting and sewing supplies

• (18063-TRQ-CTN-D)

•

• (18064-MLT-CTN-D)

• (18065-GRN-CTN-D)

Quilt

1/4 yd – Tonal Medallions

3/8 yd – Tropical

• (18062-MLT-CTN-D)

1 3/8 yds – Midnight Geos (18061-TRQ-CTN-D) for Piecing and Binding

4 7/8 yds – Lead Floral

1 1/4 yds – Mountains (18060-MLT-CTN-D)

½ yd – Hexagon

Even-feed foot (optional for quilting)

Additional Supplies Needed: • 73" x 86" (185.42 cm x 218.44 cm) Cotton batting

•

Piecing and sewing thread

•

• (18066-MLT-CTN-D)

1/4 yd – Ferns

•

3/8 yd – Diamonds

1/4 yd – Brushstrokes

•

• (18059-COR-CTN-D)

106.68

www.3wishesfabric.com page 2

cm) Fussy Cut 4 – 2 ½" x 32 ½"

Cut 8 – 2 ½" x wof

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a 1/4" (6.35 mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric

Cut 4 – 4 ½" x 21 ½" (11.43 cm x 54.61 cm)

Cut 8 – 4 ½" x 18 ½" (11.43 cm x 46.99 cm)

Cut 6 – 2 ½" x 16 ½" (6.35 cm x 41.91 cm)

Cut 12 – 3 ½" x 4 ½" (8.89 cm x 11.43 cm)

Cut 12 – 3" x 3 ½" (7.62 cm x 8.89 cm)

Cut 36 – 6 ½" x 6 ½" (16.51 cm x 16.51 cm)

Before You Begin

cm x 106.68 cm) for Binding Cut 2 – 6 ½" x 16 ½" (6.35 cm x 41.91 cm) Cut 3 – 3 ½" x 4 ½"

White on White Leaf – 18058-WOW-CTN-D (2 ½ yds x wof / 228.6 cm x 106.68 cm)

Use a rotary cutter and ruler to cut the size and number of squares and rectangles from each fabric listed below.

cm x

Cutting

cm) 6 ½" x 6 ½" 4 ½" x 21 ½" 4 ½" x 18 ½" 4 ½" x 18 ½" 2 ½" x 16 ½" 6 ½" x 16 ½" 3 ½" x 4 ½" 3 ½" x 4 ½" 3" x 3 ½" 2 ½" x wof 2 ½" x 32 ½"

Midnight Geos – 18061-TRQ-CTN-D (1 3⁄8 yds x wof / 125.73 cm x cm) (6.35 (8.89 cm x 11.43 (6.35 82.55

Cut 2 – 6 ½" x 16 ½" (6.35 cm x 41.91 cm)

Fussy Cut 4 – 6 ½" x 32 ½" (6.35 cm x 82.55 cm)

Cut 4 – 3 ½" x 3 ½" (8.89 cm x 8.89 cm)

Mountains – 18060-MLT-CTN-D (1 ¼ yds x wof / 114.3 cm x 106.68 cm)

Cut 6 – 3 ½" x 6 ½" (8.89 cm x 16.51 cm)

Cut 6 – 3 ½" x 4 ½" (8.89 cm x 11.43 cm)

Cut 2 – 6 ½" x 16 ½" (6.35 cm x 41.91 cm)

Tonal Medallions – 18057-MLT-CTN-D (¼ yd x wof / 22.86 cm x 106.68 cm)

Cut 2 – 3 ½" x 9 ½" (8.89 cm x 24.13 cm)

www.3wishesfabric.com page 3 4 ½" x 4 ½"

Cut 2 – 6 ½" x 16 ½" (6.35 cm x 41.91 cm)

Lead Floral – 18057-MLT-CTN-D (5⁄8 yd x wof / 57.15 cm x 106.68 cm)

Cut 4 – 2 ½" x 32 ½" (6.35 cm x 82.55 cm)

cm x 41.91 cm) Cut 2 – 4 ½" x 4 ½" (11.43 cm x 11.43 cm) Cut 2 – 3 ½" x 9 ½" (8.89 cm x 24.13 cm) *Note orientation of pieces Cut 4 – 3 ½" x 3 ½" (8.89 cm x 8.89 cm) 2 ½" x 32 ½" 6 ½" x 16 ½" 6 ½" x 16 ½" Brushstrokes – 18064-MLT-CTN-D (¼ yd x wof / 22.86 cm x 106.68 cm) Cut 2 – 6 ½" x 16 ½" (6.35 cm x 41.91 cm) 6 ½" x 16 ½" Ferns – 18065-GRN-CTN-D (¼ yd x wof / 22.86 cm x 106.68 cm) Cut 2 – 6 ½" x 16 ½" (6.35 cm x 41.91 cm) 6 ½" x 16 ½" 3 ½" x 9 ½" 4 ½" x 4 ½" 3 ½" x 3 ½" 6 ½" x 16 ½" 3 x½" 9 ½" 3 ½" x 3 ½" Tropical – 18066-MLT-CTN-D (3 8 yd x wof / 34.29 cm x 106.68 cm) Cut 2 – 6 ½" x 16 ½" (6.35 cm x 41.91 cm) Cut 2 – 4 ½" x 4 ½" (11.43 cm x 11.43 cm) Cut 2 – 3 ½" x 9 ½" (8.89 cm x 24.13 cm) Cut 4 – 3 ½" x 3 ½" (8.89 cm x 8.89 cm) 6 ½" x 16 ½" 3 ½" x 9 ½" 4 ½" x 4 ½" 3 ½" x 3 ½" 6 ½" x 16 ½" 3 ½" x 6 ½" 3 ½" x 4 ½"

6 ½" x 16 ½"

Cut 2 – 4 ½" x 4 ½" (11.43 cm x 11.43 cm)

Hexagon – 18059-COR-CTN-D (3⁄8 yd x wof / 34.29 cm x 106.68 cm)

Cut 2 – 6 ½" x 16 ½" (6.35

6 ½" x 32 ½"

Cut 2 – 6 ½" x 16 ½" (6.35 cm x 41.91 cm)

Diamonds – 18062-MLT-CTN-D (3 8 yd x wof / 34.29 cm x 106.68 cm)

www.3wishesfabric.com page 4

2. Repeat the technique in Step 1 to make the Blocks shown in Diagram B using the remaining 32 White on White Leaf squares (6 ½" x 6 ½" / 16.51 cm x 16.51 cm), two Tonal Medallions, two Lead Floral, two Brushstrokes, two Midnight Geos, two Tropical, two Ferns, two Hexagon, and two Mountains rectangles (6 ½" x 16 ½" / 16.51 cm x 41.91 cm).

Dia. A ¼" (6.35mm) Draw wrong side Sew and cut Press Diamonds Block 6 ½" x 16 ½" (16.51 cm x 41.91 cm) Make 2 Dia. B Tonal Medallions Block 6 ½" x 16 ½" (16.51 cm x 41.91 cm) Make 2 Lead Floral Block 6 ½" x 16 ½" (16.51 cm x 41.91 cm) Make 2 Brushstrokes Block 6 ½" x 16 ½" (16.51 cm x 41.91 cm) Make 2 Midnight Geos Block 6 ½" x 16 ½" (16.51 cm x 41.91 cm) Make 2 Tropical Block 6 ½" x 16 ½" (16.51 cm x 41.91 cm) Make 2 Ferns Block 6 ½" x 16 ½" (16.51 cm x 41.91 cm) Make 2 Hexagon Block 6 ½" x 16 ½" (16.51 cm x 41.91 cm) Make 2 Mountains Block 6 ½" x 16 ½" (16.51 cm x 41.91 cm) Make 2 Dia. C ++ = Unit 1 16 ½" x 18 ½" (41.91 cm x 46.99 cm) Make 2

3. Place one Diamonds Block, one Tonal Medallions Block and one Lead Floral Block (6 ½" x 16 ½" / 16.51 cm x 41.91 cm) as shown in Diagram C. Pin RST, sew and press to make one Unit 1 (16 ½" x 18 ½" / 41.91 cm x 46.99 cm). Make two.

Sewing

1. Draw a diagonal line on the wrong side of a White on White Leaf square (6 ½" x 6 ½" / 16.51 cm x 16.51 cm). Place on the left end of a Diamonds rectangle (6 ½" x 16 ½" / 16.51 cm x 41.91 cm) and sew on the line, trim 1/4" (6.35 mm) from the line and press. Repeat for the right end to make a Diamonds Block (6 ½" x 16 ½" / 16.51 cm x 41.91 cm). Make two.

www.3wishesfabric.com page 5 4. Follow Step 3 and Diagram D to make two Unit 2’s using two Brushstrokes Blocks, two Midnight Geos Blocks and two Tropical Blocks. Make two Unit 3’s using two Mountains Blocks, two Ferns Blocks and two Hexagon Blocks. 5. Place four White on White Leaf rectangles (4 ½" x 18 ½" / 11.43 cm x 46.99 cm) and one each Units 1, 2 and 3 (16 ½" x 18 ½" / 41.91 cm x 46.99 cm) as shown in Diagram E. Pin RST, sew and press to make Row 2 (18 ½" x 64 ½" / 46.99 cm x 163.83 cm). Repeat to make Row 8. 6. Place two White on White Leaf rectangles (3 ½" x 4 ½" / 8.89 cm x 11.43 cm) and one Diamonds rectangle (3 ½" x 9 ½" / 8.89 cm x 24.13 cm) as shown in Diagram F. Pin RST on the short ends, sew and press to make Column 1 (3 ½" x 17 ½" / 8.89 cm x 44.45 cm). Repeat to make Column 5. Dia. D Unit 2 16 ½" x 18 ½" (41.91 cm x 46.99 cm) Make 2 Unit 3 16 ½" x 18 ½" (41.91 cm x 46.99 cm) Make 2 Dia. E + + + + + + = Unit 2 Rows 2 and 8 Unit 1 Unit 3 18 ½" x 64 ½" (46.99 cm x 163.83 cm) Make 2 Dia.++F = Col. 1 & 5 3 ½" x 17 ½" (8.89 cm x 44.45 cm) Make 2

8. Place two Diamonds squares (4 ½" x 4 ½" / 11.43 cm x 11.43 cm), two Hexagon rectangles (3 ½" x 4 ½" / 8.89 cm x 11.43 cm) and one Midnight Geos rectangle (3 ½" x 4 ½" / 8.89 cm x 11.43 cm) as shown in Diagram H. Pin RST on the 4 ½" (11.43 cm) edges, sew and press to make Column 3 (4 ½" x 17 ½" / 11.43 cm x 44.45 cm).

17 ½"

Make 2 Dia. I + ++ = Col. 3Col. 2Col. 1 Col. 5 Diamonds Pieced UnitCol. 4 16 ½" x 17 ½"

Make 2 Dia. H++++ = Col. 3 4 ½"

www.3wishesfabric.com page 6

7. Place two White on White Leaf rectangles (3" x 3 ½" / 7.62 cm x 8.89 cm), two Diamonds squares (3 ½" x 3 ½" / 8.89 cm x 8.89 cm) and one Hexagon rectangle (3 ½" x 6 ½" / 8.89 cm x 16.51 cm) as shown in Diagram G. Pin RST on the 3 ½" (8.89 cm) edges, sew and press to make Column 2 (3 ½" x 17 ½" / 8.89 cm x 44.45 cm). Repeat to make Column 4.

Dia.++++G = Col. 2 & 4 3 ½" x

44.45 cm) +

9. Place Columns 1-5 as shown in Diagram I. Pin RST, sew and press to make the Diamonds Pieced Unit (16 ½" x 17 ½" / 41.91 cm x 44.45 cm). 17 ½" (8.89 cm x 44.45 cm) x (11.43 cm x 44.45 cm) (41.91 cm x

Dia. J ++ =

12. Follow Steps 6-10 and Diagram L to make the Lg. Lead Floral Block (16 ½" x 21 ½" / 41.61 cm x 54.61 cm) using:

Dia. K

Tropical - two 3 ½" x 9 ½" (8.89 cm x 24.13 cm) rectangles, four 3 ½" x 3 ½" (8.89 cm x 8.89 cm) squares, two 4 ½" x 4 ½" (11.43 cm x 11.43 cm) squares. Hexagon – two 3 ½" x 6 ½" (8.89 cm x 16.51 cm) rectangles, two 3 ½" x 4 ½" (8.89 cm x 11.43 cm) Midnightrectangles.Geos – one 3 ½" x 4 ½" (8.89 cm x 11.43 cm) rectangle.

Dia. L

Lead Floral - two 3 ½" x 9 ½" (8.89 cm x 24.13 cm) rectangles, four 3 ½" x 3 ½" (8.89 cm x 8.89 cm) squares, two 4 ½" x 4 ½" (11.43 cm x 11.43 cm) squares. Hexagon – two 3 ½" x 6 ½" (8.89 cm x 16.51 cm) rectangles, two 3 ½" x 4 ½" (8.89 cm x 11.43 cm) Midnightrectangles.Geos – one 3 ½" x 4 ½" (8.89 cm x 11.43 cm) rectangle.

16 ½" x 21 ½" (41.91 cm x 54.61 cm)

10. Place a White on White Leaf rectangle (2 ½" x 16 ½" / 6.35 cm x 41.91 cm) on the top and bottom of the Lg. Diamonds Pieced Unit (16 ½" x 17 ½" / 41.91 cm x 44.45 cm) as shown in Diagram J. Pin RST, sew and press to make the Diamonds Block (16 ½" x 21 ½" / 41.61 cm x 54.61 cm).

White on White Leaf - four 3 ½" x 4 ½" (8.89 cm x 11.43 cm) rectangles, four 3" x 3 ½" (7.62 cm x 8.89 cm) rectangles, two 2 ½" x 16 ½" (6.35 cm x 41.91 cm) rectangles.

Large Diamonds Block

www.3wishesfabric.com page 7

11. Follow Steps 6-10 and Diagram K to make the Lg. Tropical Block (16 ½" x 21 ½" / 41.61 cm x 54.61 cm) using:

Large Tropical Block

16 ½" x 21 ½" (41.91 cm x 54.61 cm)

White on White Leaf - four 3 ½" x 4 ½" (8.89 cm x 11.43 cm) rectangles, four 3" x 3 ½" (7.62 cm x 8.89 cm) rectangles, two 2 ½" x 16 ½" (6.35 cm x 41.91 cm) rectangles.

Large Lead Floral Block

16 ½" x 21 ½" (41.91 cm x 54.61 cm)

www.3wishesfabric.com page 8 13. Place four White on White Leaf rectangles (4 ½" x 21 ½" / 11.43 cm x 54.61 cm) and the Lg. Diamonds Block, Lg Tropical Block and Lg. Lead Floral Block (16 ½" x 21 ½" / 41.91 cm x 54.61 cm) as shown in Diagram M. Pin RST, sew and press to make Row 5 (21 ½" x 64 ½" / 54.61 cm x 163.83 cm). 14. Place two Lead Floral strips (2 ½" x 32 ½" / 6.35 cm x 82.55 cm) as shown in Diagram N. Pin RST on the short ends, sew and press to make Row 1 (2 ½" x 64 ½" / 6.35 cm x 163.83 cm). Repeat to make Row 9. 15. Follow Step 14 and Diagram O using the four Fussy Cut Midnight Geos strips (2 ½" x 32 ½" / 6.35 cm x 82.55 cm) to make Rows 3 and 7 (2 ½" x 64 ½" / 6.35 cm x 163.83 cm). Dia. M + + + + + + = Large Diamonds Block Large Tropical Block 21 ½" x 64 ½" (54.61 cm x 163.83 cm) Large Lead Floral Block Row 5 Dia. N += 2 ½" x 64 ½" (6.35 cm x 163.83 cm) Make 2 Rows 1 and 9 Dia. O 2 ½" x 64 ½" (6.35 cm x 163.83 cm) Make 2 Rows 3 and 7

www.3wishesfabric.com page 9 16. Follow Step 14 and Diagram P using the four Mountains rectangles (6 ½" x 32 ½" / 16.51 cm x 82.55 cm) to make rows 4 and 6 (6 ½" x 64 ½" / 16.51 cm x 163.83 cm). 17. Place Rows 1-9 as shown in Diagram Q. Pin RST matching ends and middles, sew and press to make the Painted Soul Quilt Top (64 ½" x 77 ½" / 163.83 cm x 196.85 cm). Dia. Q Row 1 Row 2 Row 3 Row 4 Row 5 Row 6 Row 7 Row 8 Row 9 ++++++++ 64 ½" x 77 ½" (163.83 cm x 196.85 cm) Painted Soul Quilt Top Dia. P 6 ½" x 64 ½" (16.51 cm x 163.83 cm) Make 2 Rows 4 and 6

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low. S

Backing 73" x 86" (185.42 cm x 218.44 cm)

Dia.

Finished Care Instructions

36 ¾" x 86" (93.35 cm x 218.44 cm) 36 ¾" x 86" (93.35 cm x 218.44 cm)

18. Remove the selvages from the Lead Floral Backing fabric. Cut two pieces 36 ¾" x 86" (93.35 cm x 218.44 cm). Note: Check orientation of fabric design. Pin the two sections RST and sew the long edges as shown in Diagram R. Press seams open or to one side. The Backing should measure 73" x 86" (185.42 cm x 218.44 cm).

21. Binding – Follow Diagram S to make the Midnight Geos Binding. Remove selvages and sew the short ends of the eight 2 ½" (6.35cm) x wof strips RST end to end at a 45° angle to make one continuous strip; press seams open. Press one short end 1/4" (6.35mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

20. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

Dia. R

19. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

Finishing

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! page 1 Finished Size: 44 ½" x 52 ½" (113.03 cm x 133.35 cm) Fabric Needed 3 Wishes Fabric® Polar Journey Collection • 1 Panel – Polar Panel (17980-MLT-CTN-D) • 5⁄8 yd – Aurora Crown (17984-BLK-CTN-D) for Piecing and Binding • 1⁄ 3 yd – Animal Flight (17982-MLT-CTN-D) • ¼ yd – Snowflake (17981-MLT-CTN-D) • ¼ yd – Village (17983-MLT-CTN-D) • ¼ yd – Ice Fantasy (17985-MLT-CTN-D) • ¼ yd – Polar Flight (17986-MLT-CTN-D) • 2 ¼ yds – Polar Flight (17986-MLT-CTN-D) Backing-Directional Additional Supplies Needed: • 53" x 61" (106.68 cm x 137.16 cm) Cotton batting • Piecing and sewing thread • Quilting and sewing supplies • Even-feed foot (optional for quilting)

Featuring the Polar Journey Collection by Josephine Wall Shipping to 2021!

stores July

Quilt

project. Do

a rotary cutter and acrylic ruler to cut the number of pieces from each fabric listed below.

Before You Begin

before cutting. Use a ¼" (6.35 mm) seam allowance and sew fabrics with right sides together

Use

Read instructions before beginning not pre-wash fabrics. Press fabrics with a dry iron on cotton setting (RST) otherwise

unless

noted. Press seams in the direction of the arrows. wof = width of fabric Polar Panel (17980-MLT-CTN-D) 1 Panel Fussy Cut 1 - 33 ½" x 41 ½" (85.09 cm x 105.41 cm) Aurora Crown (17984-BLK-CTN-D) 5∕8 Yard Cut 5 - 2 1∕2" x wof (6.35 cm x wof) Binding Cut 9 - 4 1∕2" x 4 1∕2" (11.43 cm x 11.43 cm) Animal Flight (17982-MLT-CTN-D) 1 3 Yard Cut 2 - 2" x 41 ½" (5.08 cm x 105.41 cm) Cut 2 - 2" x 36 ½" (5.08 cm x 92.71 cm) 2 ½" x wof 4 ½" x 4 ½" 2 " x 41 ½" 2 " x 36 ½"

all

www.3wishesfabric.com page 2 Cutting

www.3wishesfabric.com page 3 Sewing 1. Place two Aurora Crown, three Snowflake, two Village, two Ice Fantasy and two Polar Flight squares 4 ½" x 4 ½" (11.43 cm x 11.43 cm) as shown in Diagram A. Note: Check orientation of directional designs. Pin RST, sew and press to make the Top Border 4 ½" x 44 ½" (11.43 cm x 113.03 cm). 2. Follow Step 1 and Diagram B using two Aurora Crown, two Snowflake, two Village, two Ice Fantasy and three Polar Flight squares 4 ½" x 4 ½" (11.43 cm x 11.43 cm) to Make the Bottom Border 4 ½" x 44 ½" (11.43 cm x 113.03 cm). Dia. A Top Border 4 ½" x 44 ½" (11.43 cm x 113.03 cm) + + + + + + + + + + = Snow ake (17981-MLT-CTN-D) 1∕4 Yard Cut 9 - 4 1∕2" x 4 1∕2" (11.43 cm x 11.43 cm) 4 ½" x 4 ½" 4 ½" x 4 ½" Ice Fantasy (17985-MLT-CTN-D) 1∕4 Yard Cut 8 - 4 1∕2" x 4 1∕2" (11.43 cm x 11.43 cm) 4 ½" x 4 ½" Village (17983-MLT-CTN-D) 1∕4 Yard Cut 9 - 4 1∕2" x 4 1∕2" (11.43 cm x 11.43 cm) Polar Flight (17986-MLT-CTN-D) 1 4 Yard Cut 9 - 4 1∕2" x 4 1∕2" (11.43 cm x 11.43 cm) 4 ½" x 4 Dia.½"B Bottom Border 4 ½" x 44 ½" (11.43 cm x 113.03 cm)

Dia. D4 ½" x 44 ½" (11.43 cm x 113.03 cm) Right

3. Place two Aurora Crown, two Snowflake, three Village, two Ice Fantasy and two Polar Flight squares 4 ½" x 4 ½" (11.43 cm x 11.43 cm) as shown in Diagram C. Note: Check orientation of directional designs. Pin RST, sew and press to make the Left Side Border 4 ½" x 44 ½" (11.43 cm x 113.03 cm).

Dia. C ++++++++++ = 4 ½" x 44 ½" (11.43 cm x 113.03 cm) Left

www.3wishesfabric.com page 4

4. Follow Step 3 and Diagram D using three Aurora Crown, two Snowflake, two Village, two Ice Fantasy and two Polar Flight squares, to Make the Right Side Border 4 ½" x 44 ½" (11.43 cm x 113.03 cm). BorderSide BorderSide

½"

6. Place the Top and Bottom Borders as shown in Diagram F. Note: Check the orientation of the borders. Pin RST matching center and ends, sew and press. Place the Side Borders as shown. Pin RST matching center and ends, sew and press. The Polar Journey Quilt Top should measure 44 ½" x 52 ½" (113.03 cm x 133.35 cm). 36 ½" x 44 ½" (92.71 cm x 113.03 cm)

Dia. E + + + +

Top BottomQuiltBorderCenter+Border

www.3wishesfabric.com page 5

5. Place an Animal Flight strip 2" x 41 ½" (5.08 cm x 105.41 cm) on the top and bottom of the Fussy Cut Polar Journey Panel rectangle 33 ½" x 41 ½" (85.09 cm x 105.41 cm) as shown in Diagram E. Pin RST matching center and ends, sew and press. Place an Animal Flight strip 2" x 36 ½" (5.08 cm x 92.71 cm) on each side. Pin RST matching center and ends, sew and press. The Quilt Center should measure 36 ½" x 44 ½" (92.71 cm x 113.03 cm).

+ + +

LeftBorderSide RightBorderSide

Dia. F Polar

Quilt Center Journey Quilt Top 44 ½" x 52 (113.03 cm x 133.35 cm)

two sections RST and sew the long edges as shown in

Finishing

and sew; press. Pin

should measure 53" x 61" (134.62 cm x 154.94 cm). 8. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired. 9. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top. Dia. G Polar Flight (17986-MLT-CTN-D) 2 1 4 Yards Backing - Directional 53" x 61" (134.62 cm x 154.94 cm) Cut 1 - 40 ¾" x 53" (103.505 cm x 134.62 cm) Cut 2 - 20 ¾" x 26 ¾" (52.71 cm x 67.95 cm)40 ¾" x 53" 20 ¾" x 26 ¾" 20 ¾" x 26 ¾"

from the Polar Flight

www.3wishesfabric.com page 6

Note:

53"

40 ¾"

Remove

7. the selvages Backing fabric. Fabric is directional. Cut one piece x (103.51 cm x 134.62 cm) (52.71 cm x 67.95 cm). the two smaller the short edges the Diagram seams Backing

pieces RST on

open or to one side. The

G. Press

and two pieces 20 ¾" x 26 ¾"

Finished Care Instructions

10. Binding – Follow Diagram H to make the Aurora Crown Binding. Remove selvages and sew the short ends of the five 2 ½" x wof (6.35 cm x wof) strips RST end to end at a 45˚ angle to make one continuous strip; press seams open. Press one short end ¼" (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

Dia. H

www.3wishesfabric.com page 7

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low.

cm) Paper plates

• 3/4 yard – Forest (18114-PUR-CTN-D)

• 61" x 61" (154.94 cm x 154.94 cm)

• 1 yard – Black Solid

Additional Supplies

• 1/3 yard – Jack (18113-BLK-CTN-D)

Cotton batting

16

•

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas!

page 1 Finished Size: 53" x 53" (134.62 cm x 134.62 cm) Fabric Needed 3 Wishes Fabric® Spooky Night Collection by Beth Albert

• 3/4 yard – Webs (18112-CHR-CTN-D)

• – 9" (22.86

• 2 3/4 yards – Webs (18112-CHR-CTN-D) for Backing (Directional)

• 1/4 yards Patchwork (18111-MLT-CTN-D)

Featuring the Spooky Night Collection by Beth Albert to stores June 2021!

1

•

• (optional for quilting)

Even-feed foot

Quilt

Needed:

Quilting and sewing supplies

• 3/4 yard – Pumpkin Patch (18115-GRY-CTN-D)

–

Shipping

Piecing and sewing thread

Before You Begin

www.3wishesfabric.com page 2 Cutting Use a rotary cutter and ruler to cut the size and number of squares and rectangles from each fabric listed below. Refer to Diagrams A-H to label the paper plates with the Block identification and organize the pieces for each block on the plates as they are cut.

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a 1/4" (6.35 mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric 2 ½" x wof ""4x6½ 12 ½" x 5" "12x"5½ Webs (18112-CHR-CTN-D) ¾ yard Cut 6 2 ½" (6.35 cm) x wof (Binding) Cut 8 4" x 6 ½" (10.16 cm x 16.51 cm) Pumpkin Patch (18115-GRY-CTN-D) ¾ yard Cut 4 5" x 12 ½" (12.7 cm x 31.75 cm) Cut 4 12 ½" x 5" (31.75 cm x 12.7 cm) 6 ½" x 7 ½" 7 ½" x 6 ½" "6x2""12x2"½½ Patchwork (18111-MLT-CTN-D) 1 ¼ yards Fussy Cut 8 6 ½" x 7 ½" (16.51 cm x 19.05 cm) vertical Fussy Cut 8 7 ½" x 6 ½" (19.05 cm x 16.51 cm) horizontal Black Solid 1 yard Cut 40 2" x 12 ½" (5.08 cm x 31.75 cm) Cut 16 2" x 6 ½" (5.08 cm x 16.51 cm)

www.3wishesfabric.com page 3

Sewing

1. Place one Pumpkin Patch vertical rectangle 5" x 12 ½" (12.7 cm x 31.75 cm), one Fussy Cut Patchwork vertical rectangle 6 ½" x 7 ½" (16.51 cm x 19.05 cm), one Jack rectangle 4" x 6 ½" (10.16 cm x 16.51 cm), one Black Solid rectangle 2" x 12 ½" (5.08 cm x 31.75 cm) and one Black Solid rectangle 2" x 6 ½" (5.08 cm x 16.51 cm) as shown in Diagram A. Pin the pieces in Column 3 RST, sew and press. Pin the Columns together, sew and press to make Block 1A finishing at 12 ½" x 12 ½" (31.75 cm x 31.75 cm).

to make Blocks 1C, 3A and 3C each finishing at 12 ½" x 12 ½" (31.75 cm x 31.75 cm).++ =+ + 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Col. 1 Col. 2 Col. 3Dia. A Block 1A 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 3C 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 3A 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 1CDia. B "12x"5½ 12 ½" x 5" 2" x 2" 4" x 6 ½" Forest (18114-PUR-CTN-D) ¾ yard Cut 4 5" x 12 ½" (12.7 cm x 31.75 cm) Cut 4 12 ½" x 5" (31.75 cm x 12.7 cm) Jack (18113-BLK-CTN-D) 1⁄3 yard Cut 8 4" x 6 ½" (10.16 cm x 16.51 cm) Cut 9 2" x 2" (5.08 cm x 5.08 cm)

2. Follow Step 1 and Diagram B using three Pumpkin Patch vertical rectangles 5" x 12 ½" (12.7 cm x 31.75 cm), three Fussy Cut Patchwork vertical rectangles 6 ½" x 7 ½" (16.51 cm x 19.05 cm), three Jack rectangles 4" x 6 ½" (10.16 cm x 16.51 cm), three Black Solid rectangles 2" x 12 ½" (5.08 cm x 31.75 cm) and three Black Solid rectangles 2" x 6 ½" (5.08 cm x 16.51 cm)

Note: Fabric is directional. Label Blocks as they are made.

31.75 cm). +++ + =12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 2A Row 1 Row 2 Row 3 Dia. E 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 4C 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 4A 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 2CDia. F 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 3D 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 3B 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 1DDia. D + + = ++ 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 1B Col. 1Dia. C Col. 2 Col. 3

rectangles 2" x 6 ½"

three

6. Follow Step 5 and Diagram F using three Forest horizontal rectangles 12 ½" x 5 ½" (31.75 cm x 12.7 cm), three Fussy Cut Patchwork horizontal rectangles 7 ½" x 6 ½" (19.05 cm x 16.51 cm), three Webs rectangles 4" x 6 (10.16 cm x 16.51 cm), Black Solid x (10.16 cm x 16.51 cm) Black Solid (5.08 cm x 16.51 cm) x

½"

4. Follow Step 3 and Diagram D using three Forest vertical rectangles 5" x 12 ½" (12.7 cm x 31.75 cm), three Fussy Cut Patchwork vertical rectangles 6 ½" x 7 ½" (16.51 cm x 19.05 cm), three Jack rectangles 4" x 6 ½" (10.16 cm x 16.51 cm), three Black Solid rectangles 2" x 12 ½" (5.08 cm x 31.75 cm) and three Black Solid rectangles 2" x 6 ½" (5.08 cm x 16.51 cm) to make Blocks 1D, 3B and 3D each finishing at 12 ½" x 12 ½" (31.75 cm x 31.75 cm).

5. Place one Forest horizontal rectangle 12 ½" x 5 ½" (31.75 cm x 12.7 cm), one Fussy Cut Patchwork horizontal rectangle 7 ½" x 6 ½" (19.05 cm x 16.51 cm), one Webs rectangle 4" x 6 ½" (10.16 cm x 16.51 cm), one Black Solid rectangle 2" x 12 ½" (5.08 cm x 31.75 cm) and one Black Solid rectangle 2" x 6 ½" (5.08 cm x 16.51 cm) as shown in Diagram E. Pin the pieces in Row 1 RST, sew and press. Pin the Rows together, sew and press to make Block 2A finishing at 12 ½" x 12 ½" (31.75 cm x 31.75 cm).

www.3wishesfabric.com page 4

and three

to make Blocks 2C, 4A and 4C each finishing at 12 ½" x 12 ½" (31.75 cm

6 ½"

3. Place one Forest vertical rectangle 5" x 12 ½" (12.7 cm x 31.75 cm), one Fussy Cut Patchwork vertical rectangle 6 ½" x 7 ½" (16.51 cm x 19.05 cm), one Jack rectangle 4" x 6 ½" (10.16 cm x 16.51 cm), one Black Solid rectangle 2" x 12 ½" (5.08 cm x 31.75 cm) and one Black Solid rectangle 2" x 6 ½" (5.08 cm x 16.51 cm) as shown in Diagram C. Pin the pieces in Column 1 RST, sew and press. Pin the Columns together, sew and press to make Block 1B finishing at 12 ½" x 12 ½" (31.75 cm x 31.75 cm).

rectangles 4"

8. Follow Step 7 and Diagram H using three Pumpkin Patch horizontal rectangles 12 ½" x 5 ½" (31.75 cm x 12.7 cm), three Fussy Cut Patchwork horizontal rectangles 7 ½" x 6 ½" (19.05 cm x 16.51 cm), three Web rectangles 4" x 6 ½" (10.16 cm x 16.51 cm), three Black Solid rectangles 4" x 6 ½" (10.16 cm x 16.51 cm) and three Black Solid rectangles 2" x 6 ½" (5.08 cm x 16.51 cm) to make Blocks 2D, 4B and 4D finishing at 12 ½" x 12 ½" (31.75 cm x 31.75 cm).

www.3wishesfabric.com page 5

9. Place four Black Solid strips 2" x 12 ½" (5.08 cm x 31.75 cm) and three Jack squares 2" x 2" (5.08 cm x 5.08 cm) as shown in Diagram I. Pin RST, sew and press to make Row 2 finishing at 2" x 53" (5.08 cm x 134.62 cm). Repeat to make Rows 4 and 6.

7. Place one Pumpkin Patch horizontal rectangle 12 ½" x 5 ½" (31.75 cm x 12.7cm), one Fussy Cut Patchwork horizontal rectangle 7 ½" x 6 ½" (19.05 cm x 16.51 cm), one Webs rectangle 4" x 6 ½" (10.16 cm x 16.51 cm), one Black Solid rectangle 4" x 6 ½" (10.16 cm x 16.51 cm) and one Black Solid rectangle 2" x 6 ½" (5.08 cm x 16.51 cm) as shown in Diagram G. Pin the pieces in Row 3 RST, sew and press. Pin the Rows together, sew and press to make Block 2B finishing at 12 ½" x 12 ½" (31.75 cm x 31.75 cm).

2" x 53" (5.08 cm x 134.62 cm) Make 3 Rows 2, 4 & 6 + + + + + + = Dia. I ++++ =12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 2BRow 1 Row 2 Row 3 Dia. G 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 4D 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 4B 12 ½" x 12 ½" (31.75 cm x 31.75 cm) Block 2DDia. H

www.3wishesfabric.com page 6 10. Place Blocks 1A, 1B, 1C and 1D and three Black Solid rectangles 2" x 12 ½" (5.08 cm x 31.75 cm) as shown in Diagram J. Pin RST, sew and press to make Row 1 finishing at 12 ½" x 53" (31.75 cm x 134.62 cm). Pin a label with the Row number on the first block. 11. Follow Step 10 and Diagram K using Blocks 2A, 2B, 2C and 2D and three Black Solid rectangles 2" x 12 ½" (5.08 cm x 31.75 cm) to make Row 3 finishing at 12 ½" x 53" (31.75 cm x 134.62 cm). 12. Follow Step 10 and Diagram L using Blocks 3A, 3B, 3C and 3D 2" x 12 ½" (5.08 cm x 31.75 cm) to make Row 5 finishing at 12 ½" x 53" (31.75 cm x 134.62 cm). 13. Follow Step 10 and Diagram M using Blocks 4A, 4B, 4C and 4D 2" x 12 ½" (5.08 cm x 31.75 cm) to make Row 7 finishing at 12 ½" x 53" (31.75 cm x 134.62Dia.cm).M Row 7 12 ½" x 53" (31.75 cm x 134.62 cm) Block 4B Block 4DBlock 4CBlock 4A Block 2DBlock 2BBlock 2A Block 2C Dia. K Row 3 12 ½" x 53" (31.75 cm x 134.62 cm) Dia. L Row 5 12 ½" x 53" (31.75 cm x 134.62 cm) Block 3CBlock 3B Block 3DBlock 3A 12 ½" x 53" (31.75 cm x 134.62 cm) Block 1C + + + + + Dia. J Block 1DBlock 1B Row 1 Block 1A

Finishing

Webs (18112-CHR-CTN-D) 2 ¾ yards Cut 1 40 ¼" x 61" (102.24 cm x 154.94 cm) Cut 2 21 ¼" x 30 ¾" (51.44 cm x 78.11 cm) Dia. O Spooky Night Backing 61" x 61" (154.94 cm x 154.94 cm) 40 ¼" x 61" 21 30x¼"¾" 21 30x¼"¾" 21 30x¼"¾"21¼"x30¾"40 ¼" x 61" Dia. N Spooky Night Quilt Top 53" x 53" (134.62 cm x 134.62 cm) + Row 1 Row 3 Row 2 Row 7 Row 6 Row 5 Row 4 +++++

12. Remove the selvages from the Webs Backing fabric. Note: Check the direction of the printed design. Cut one piece 40 1/4" x 61" (102.24 cm x 154.94 cm) and two pieces 21 1/4" x 30 3/4" (53.98 cm x 78.12 cm). Pin RST and sew the two smaller pieces on the short edges; press. Pin the two sections RST and sew along the long edges as shown in Diagram O. Press the seam open or to one side. The Backing should measure 61" x 61" (154.94 cm x 154.94 cm).

www.3wishesfabric.com page 7 14. Place Rows 1-7 as shown in Diagram N, matching ends and seams. Pin RST, sew and press to make the Spooky Night Quilt Top finishing at 53" x 53" (134.62 cm x 134.62 cm).

Dia. P

15. Binding – Follow Diagram P to make the Webs Binding. Remove selvages and sew the short ends of the six 2 ½" (6.35 cm) x wof strips RST end to end at a 45° angle to make one continuous strip; press seams open. Press one short end 1/4" (6.35mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

13. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

www.3wishesfabric.com page 8

14. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

Finished Care Instructions

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low.

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! page 1 Finished Size: 63 ½" x 63 ½" (162.56 cm x 162.56 cm) Fabric Needed 3 Wishes Fabric® Starlight Collection • 2 yds – Planets (18047-NVY-CTN-D) • 1 1⁄4 yds – Solar System (18054-WHT-CTN-D) • 3 ⁄4 yd – Bright Sky (18053-MLT-CTN-D) • 3 ⁄4 yd – Constellations (18056-BLU-CTN-D) for Piecing and Binding • 1⁄ 2 yd – Sky (18055-MLT-CTN-D) • 3 ⁄8 yd – Atmosphere (18048-MLT-CTN-D) • ¼ yd – Cosmic Sky (18050-MLT-CTN-D ) • 4 1⁄8 yds – Nebula (18051-MLT-CTN-D) Backing Additional Supplies Needed: • 72" x 72" (182.88 cm x 182.88 cm) Cotton batting • Piecing and sewing thread • Quilting and sewing supplies • Spray Starch (optional) • Even-feed foot (optional for quilting) • Pressing cloth

Tips for successful construction:

Before You Begin

Cut 4 - 10 ¾" x 10 ¾" (27.31 cm x 27.31 cm) (cut on diagonal) x 15" ¾" x 10 ¾"

Use a rotary cutter and acrylic ruler to cut the number of pieces from each fabric listed below.

x wof) Cut 3 - 3 ¾" x 11" (9.53 cm x 27.94 cm) 6 ½" x 32" 3 ¾" x wof 3 ¾" x11" 26"x"½6

Use spray starch to make sure the strip set is straight and flat. The spray starch will also stabilize the fabric to minimize stretching of the bias edges when sewing. (18047-NVY-CTN-D) 2 yards - (16.51 cm x 81.28 - 6 ½" (16.51 cm x 66.04 - 3 ¾" cm

x wof" (9.53

Read all instructions before beginning project. Do not pre-wash fabrics. Note: Take special care when pressing glitter fabrics. Always press from the wrong side or use a pressing cloth. Press fabrics with a dry iron on cotton setting before cutting. Use a ¼" (6.35 mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric

x 26"

Cut 4 - 15" x 15" (38.1 cm x 38.1 cm) (cut on diagonal)

www.3wishesfabric.com page 2

15"

Ensure an accurate seam allowance by sewing a practice set of three 3 ¾” x 8” (9.53 cm x 20.32 cm) rectangles together. If the strip set does not measure 10 ¼” (26.04 cm) wide, adjust the seam allowance until it does.

Cutting

10

Solar System (18054-WHT-CTN-D) 1 ¼ yards

Planets

cm) Cut 3

6 ½" x 32"

cm) Cut 4

Cut 4

Cut 2 - 3 ¾" x 11" (9.53 cm x 27.94 cm)

11" 1 ¾" x 25 ½" 1 ¾" x 24 ¼" 3 (8.89½"cm) 3 (8.89½"cm) 10 (26.04¼"cm) Dia. A

Cut 1 - 3 ¾" x 11" (9.53 cm x 27.94 cm) x

Cut 4 - 1¾" x 25 ½" (4.45 cm x 64.77 cm)

Cut 4 - 1 ½" x 25" (3.81 cm x 63.5 cm)

Cut 2 - 3 ¾" x wof" (9.53 cm x wof)

Cut 1 - 3 ¾" x 11" (9.53 cm x 27.94 cm)

Cut 2 - 3 ¾" x 11" (9.53 cm x 27.94 cm)

Cosmic Sky (18050-MLT-CTN-D) ¼ yard

Cut 1 - 3 ¾" x wof" (9.53 cm x wof)

Bright Sky (18053-MLT-CTN-D) ¾ yard

www.3wishesfabric.com page 3

Sewing

3 ¾" x wof 3 ¾" x wof 2 ½" x wof 3 ¾" x11" 3 ¾" x11"

1 ½" x 25" 1 ½" x 26" 3 ¾" x wof 3 ¾" x 11" 3 ¾" x wof 3 ¾"

1. Strip Set A - Place the Cosmic Sky, Atmosphere and Planets strips 3 ¾" x wof (9.53 cm x wof) with the ends offset by 3 ½" (8.89 cm) as shown in Diagram A. Pin RST and sew. Press the seams in the direction shown. The strip set width should measure 10 ¼" (26.04 cm) wide.

Cut 7 - 2 ½" x wof" (6.35 cm x wof) (Binding)

Note: To simplify making the Center Star, the diamond units are created from three different strip-pieced combinations and the corners are made from triangles rather than set in squares.

Constellations (18056-BLU-CTN-D) ¾ yard

Cut 4 - 1 ¾" x 24 ¼" (4.45 cm x 61.60 cm)

Cut 2 - 3 ¾" x wof" (9.53 cm x wof)

Sky (18055-MLT-CTN-D) ½ yard

Cut 4 - 1 ½" x 26" (3.81 cm x 66.04 cm)

Atmosphere (18048-MLT-CTN-D) 3/8 yard

www.3wishesfabric.com page 4 2. Align the 45˚ line of the acrylic ruler with the edge of the strip set and carefully trim as shown in Diagram B. 3. Continue cutting 3 ¾" (9.53 cm) segments at a 45˚ angle as shown in Diagram C to yield seven Strip Set A Segments. 4. Repeat Steps 1-3 with the shorter Cosmic Sky, Atmosphere and Planets rectangles 3 ¾" x 11" (9.53 cm x 27.94 cm) to make one more Strip Set A as shown in Diagram D, for a total of eight Strip Set A Segments. 5. Strip Set B - Repeat Steps 1-4 with Atmosphere, Planets and Bright Sky strips 3 ¾" x wof (9.53 cm x wof) and rectangles 3 ¾" x 11" (9.53 cm x 27.94 cm) to make a total of eight Strip Set B Segments as shown in Diagram E. Note: The pressing direction is the opposite from Step 1 so seams will nest during construction. selvagesremove Dia. B 45° Dia. C 45° 3 ¾" 3 ¾" 3 ¾" 3 ¾" 3 ¾" 3 ¾" 3 ¾" Strip Set A Makes 7 Dia. D 3 ¾" Strip Set A Make 1 more (Total of 8) Dia. E3 (8.89½"cm) 3 (8.89½"cm) Make 8 Strip Set B segments 45° 3 ¾" 3 ¾" 3 ¾" 3 ¾" 3 ¾" 3 ¾" 3 ¾" 3 ¾"

8. Finish making the first pieced diamond by following Step 7 and adding Strip Set C as shown in Diagram I. Press carefully with seams going in the same direction. Dia.StripG Set A Strip Set A + B Strip Set A + Strip Set B Strip Set B ¼" (6.35 mm) Seam allowance 3 8" (9.53mm) 3∕8" (9.53 mm) = Dia.SeamH too wide Seam too narrow Perfect seam Dia. I Strip Set A & B Strip Set C Pieced Diamond + = Dia. F Make 8 Strip Set C segments 3 (8.89½"cm) 3 (8.89½"cm)45° 3 ¾" 3 ¾" 3 ¾" 3 ¾" 3 ¾" 3 ¾" 3 ¾" 3 ¾"

Tip: For perfectly matched diagonal seams, position Strip Set A and Strip Set B RST as shown. Push a fine straight pin through the seam of Strip Set B at the ¼" (6.35 mm) seam allowance and match to the ¼" (6.35 mm) seam allowance of the Strip Set A directly below. This is the exact spot that the sewing machine needle should penetrate while sewing the seam. Repeat to pin the second seam adding additional pins along the seam as needed. The tips at each end should show about 3/8" (9.53 mm). Sew the seam with an accurate ¼" (6.35 mm) seam allowance.

www.3wishesfabric.com page 5 6. Strip Set C - Repeat Steps 1-4 with Planets, Bright Sky and Constellations strips 3 ¾" x wof (9.53 cm x wof) and rectangles 3 ¾" x 11" (9.53 cm x 27.94 cm) to make a total of eight Strip Set C Segments as shown in Diagram F. Note: Seams are pressed the same as Strip Set A

Check to see that the points match after sewing. Note: If the seam is too wide, the points will overlap and if it is too narrow the seams will gap as shown in Diagram H. The seams of the strip sets were pressed in opposite directions to facilitate matching.

7. To make one Pieced Diamond, lay out Strip Segments A and B as shown in Diagram G.

(9.533∕8"mm) (9.533∕8"mm) Dia. J Pieced Diamond Wrong side¼" (6.35 mm) Seam allowance Dia. M 24 3∕8" (61.91 cm) Make 4 34 (87.63½"cm) ¼" (6.35 mm) Seam allowance Wedge Unit B (9.533∕8"mm) (9.533∕8"mm)

Dia. K 14 ½" (36.83 cm) 14 (36.83½"cm) 10 (26.04¼"cm) 24 (62.87¾"cm) 45° Make 8 Dia. L Make 4 ¼"

10. Repeat Steps 7-9 to make a total of eight Pieced Diamonds. Use a cutting mat or square up ruler to check measurements as shown in Diagram K. Tip: Changes to the shape can be made while it is slightly damp with spray starch. Use your hands to gently re-shape, then press.

11. Place a Solar System triangle 15" (38.1 cm) short side on the right side of a Pieced Diamond oriented as shown in Diagram L. The tips should be offset by about 3⁄8" (9.53 mm) so the edges will line up. Pin RST, matching the ¼" (6.35 mm) seam intersections; sew and press. Repeat to make four Partial Wedge B Units.

12. Place a Solar System triangle 10 ¾" (27.31 cm) long side on a Partial Wedge Unit B made in Step 11 as shown in Diagram M. The tips should be offset by about 3 8" (9.53 mm). Pin RST, matching the ¼" (6.35 mm) seam intersections, sew and press to make one Wedge Unit B, 24 3/8" (61.91 cm) on the short side. Trim slightly if necessary, maintaining the ¼" (6.35 mm) seam allowance at the Pieced Diamond tip. Repeat to make a total of four. (6.35 mm) UnitWedgeB

Seam allowance Partial

www.3wishesfabric.com page 6

9. On the wrong side, draw small lines at each corner to show the ¼" (6.35 mm) seam intersections as shown in Diagram J.

14. Place one Wedge Unit A and one Wedge Unit B as shown in Diagram O. Tip: Strive for perfectly matched seams using the same tips for making the Pieced Diamonds in Step 7. Pin RST and sew. Press the seam open. The A/B Quarter Unit should measure 24 ¼" x 24 ¼" (61.6 cm x 61.6 cm). Make four.

A/B Quarter Unit

N 24 (61.913∕8"cm) 34 (87.63½"cm) ¼" (6.35 allowanceSeammm) Make 4 Wedge Unit A(9.533∕8"mm) (9.533∕8"mm)

15. Place the four A/B Quarter Units in two rows as shown in Diagram P. Pin RST and sew the A/B Quarter Units in each row together.

www.3wishesfabric.com page 7

24 ¼" x 24 ¼" (61.6 cm x 61.6 cm) Make 4 Wedge Unit B

+ = Quilt CenterDia. P + 48" x 48" (121.92 cm x 121.92 cm) Make 4 + +

13. Repeat Steps 11 and 12 except start by placing the Solar System triangle 15" (38.1 cm) long side, on the Pieced Diamond oriented as shown in Diagram N. Sew a Solar System Triangle, 10 ¾" (27.31 cm) short side, to the Partial Wedge Unit A. Repeat to make four Wedge Unit A’s.

Wedge Unit A

Tip: Strive for perfectly matched seams using the same tips for making the Pieced Diamonds in Step 7.

Press the seams open. Pin the rows RST and sew (matching the center and seams). Press the seam open to complete the Quilt Center that should measure approximately 48" x 48" (121.92 cm x 121.92 cm).

Dia. O

Dia.

www.3wishesfabric.com page 8 16. Place two Bright Sky strips 1 ¾" x 24 ¼" (4.45 cm x 61.6 cm) as shown in Diagram Q. Pin RST on the short ends, sew and press to make a Bright Sky Side Border 1 ¾" x 48" (4.45 cm x 121.92 cm). Make two. 17. Follow Step 16 and Diagram R using the four Bright Sky strips 1 ¾" x 25 ½" (4.45 cm x 64.77 cm) to make the Bright Sky Top and Bottom Borders 1 ¾" x 50 ½" (4.45 cm x 128.27 cm). 18. Follow Step 16 and Diagram S using the four Sky Strips 1 ½" x 25" (3.81 cm x 63.5 cm) to make two Sky Side Borders 1 ½" x 49 ½" (3.81 cm x 125.73 cm). 19. Follow Step 16 and Diagram T using the four Sky Strips 1 ½" x 26" (3.81 cm x 66.04 cm) to make the Sky Top and Bottom Borders 1 ½" x 51 ½" (3.81 cm x 130.81 cm). 20. Follow Step 16 and Diagram U using the four vertical Planets rectangles 6 ½" x 26" (16.51 cm x 66.04 cm) to make the two Planets Side Borders 6 ½" x 51 ½" (16.51 cm x 130.81 cm). 21. Follow Step 16 and Diagram V using the four horizontal Planets rectangles 6 ½" x 32" (16.51 cm x 81.28 cm) to make the Planets Top and Bottom Borders 6 ½" x 63 ½" (16.51 cm x 161.29 cm). + Dia. Q Bright Sky Side Borders 1 ¾" x Make48"2 Bright Sky Top and Bottom Borders Dia. R 1 ¾" x 50 ½" Make 2 Sky Side Borders Dia. S 1 ½" x 49 ½" Make 2 Sky Top and Bottom Borders Dia. T 1 ½" x 51 ½" Make 2 Planets Side Borders Dia. U 6 ½" x 51 ½" Make Planets2 Top and Bottom Borders Dia. V 6 ½" x 63 ½" Make 2

Top and Bottom: 2 – Sky Top and Bottom Borders 1 ½" x 51 ½" (3.81 cm x 130.81 cm)

Sides: 2 – Planets Side Borders 6 ½" x 51 ½" (16.51 cm x 130.81 cm)

Top and Bottom: 2 – Sky Top and Bottom Borders 6 ½" x 63 ½" (16.51 cm x 161.29 cm)

Trim the same amount from each side to measure exactly 49 ½" x 49 ½" (125.73 cm x 125.73 cm) to insure accurate piecing with the remaining borders.

Dia. W

Planets Border

Quilt Top 51 ½" x 51 ½" (130.81 cm x 130.81 cm)

www.3wishesfabric.com page 9

Sky Border

22. Place a Bright Sky Side Border 1 ¾" x 48" (4.45 cm x 121.92 cm) on each side of the Center Star as shown in Diagram W. Pin RST matching center and ends; press. Place the Top and Bottom Bright Sky Borders as shown. Pin RST matching center and ends; press. The Quilt Center plus Bright Sky Border was designed to be a little larger than needed and should measure approximately 50 ½" x 50 ½" (128.27 cm x 128.27 cm).

Quilt Top 63 ½" x 63 ½" (161.29 cm x 161.29 cm)

Quilt Center with Bright Sky Border 50 ½" x 50 ½" Quilt Top

Sides: 2 – Sky Side Borders 1 ½" x 49 ½" (3.81 cm x 125.73 cm)

Dia. X 63 ½" x 63 ½"

49 ½" x 49 ½" + +++ ++++ + + + + Starlight

23. Refer to Diagram X to place the remaining Borders around the Quilt Center with Bright Sky Border 49 ½" x 49 ½" (125.73 cm x 125.73 cm). Sew each Border RST in the order listed. Pin matching center and ends. Press seams as shown. Measure at each step to ensure the next border will fit. If one border is a little larger than the border it is being sewn to, pin well to ease the fullness and place the fullness on the bottom while sewing.

24. Remove the selvages from the Nebula Backing fabric. Cut two pieces 36 ¼" x 72" (92.075 cm x 182.88 cm). Pin RST along the long edges and sew as shown in Diagram Y. Press the seam open or to one side. The Backing should measure 72" x 72" (182.88 cm x 182.88 cm).

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low. Dia. Y

25. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

27. Binding – Follow Diagram Z to make the Constellations Binding. Remove selvages and sew the short ends of the seven 2 ½" x wof (6.35 cm x wof) strips RST end to end at a 45˚ angle to make one continuous strip; press seams open. Press one short end ¼" (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

Backing 72" x 72" (182.88 cm x 182.88 cm) 36 ¼" x 72" 36 ¼" x 72"

Finishing

26. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

Dia. Z

www.3wishesfabric.com page 10

Finished Care Instructions

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! Featuring the Welcome to the CollectionJungle by Scott Barnes

Quilt

• 5/8 yd – Giraffe/Tiger (18074-TRQ-FLN-D)

Fabric Needed

• 5/8 yd – Animal Patch (18071-WHT-FLN -D)

Shipping to stores July 2021!

page 1

Finished Size: 50 ½" x 50 ½" (128.27 cm x 128.27 cm)

• 2 ½ yds – Jungle Friends (18072-WHT-FLN-D)

• Quilting and sewing supplies

• 5/8 yd – Solid White Flannel

• 59" x 59" (149.86 cm x 149.86 cm) Cotton batting

• 7/8 yd – Plaid (18075-WHT-FLN-D) for Piecing and Binding

3 Wishes Fabric® Welcome to the Jungle Collection

• 5/8 yd – Rainbow Clouds (18073-BLU-FLN-D)

• Piecing and sewing thread

• 5/8 yd – Jungle Friends (18072-WHT-FLN-D)

• Even-feed foot (optional for quilting)

Additional Supplies Needed:

1 ½" x 20 ½" 1 ½" x 18 ½" 18 ½" x 18 ½"

Animal Patch – 18071-WHT-FLN-D (5 8 yd x wof / 57.15 cm x 106.68 cm)

4 ½" x 22 ½"

Plaid – 18075-WHT-FLN-D (7 8 yd x wof / 80.01 cm x 106.68 cm)

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a ¼" (6.35mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric

Cut 4 – 4 ½" x 22 ½" (11.43 cm x 57.15 cm)

Rainbow Clouds – 18073-BLU-FLN-D (5 8 yd x wof / 57.15 cm x 106.68 cm)

Jungle Friends – 18072-WHT-FLN-D (5 8 yd x wof / 57.15 cm x 106.68 cm)

2 ½" x wof

Cut 2 – 1 ½" x 18 ½" (3.81 cm x 46.99 cm)

Cut 6 – 2 ½" x wof (6.35 cm x 106.68 cm) for Binding

Cutting

www.3wishesfabric.com page 2

4 ½" x 4 ½" 4 ½" x 32 ½"

Cut 12 – 4 ½" x 4 ½" (11.43 cm x 11.43 cm)

Cut 1 – 18 ½" x 18 ½" (46.99 cm x 46.99 cm)

Cut 2 – 1 ½" x 20 ½" (3.81 cm x 52.07 cm)

Cut 4 – 4 ½" x 32 ½" (11.43 cm x 82.55 cm)

Use a rotary cutter and ruler to cut the size and number of squares and rectangles from each fabric listed below. Note: Check orientation of directional designs.

Before You Begin

Rainbow Clouds – 18073-BLU-FLN-D (5 8 yd x wof / 57.15 cm x 106.68 cm)

Note: Check orientation of directional designs.

x 42 ½"

Third Border Top and Bottom

1 ½" x 20 ½"

2. Follow Step 1 and Diagram B using four Plaid squares (4 ½" x 4 ½" / 11.43 cm x 11.43 cm) and two Jungle Friends rectangles (4 ½" x 32 ½" / 11.43 cm x 82.55 cm) to make the Fifth Border Top and Bottom (4 ½" x 40 ½" / 11.43 cm x 102.87 cm).

1 ½" x 30 ½"

1. Place a Plaid square (4 ½" x 4 ½" / 11.43 cm x 11.43 cm) on each side of a Rainbow Clouds rectangle (4 ½" x 22 ½" / 11.43 cm x 57.15 cm) as shown in Diagram A. Pin RST, sew and press to make the Third Border Top (4 ½" x 30 ½" / 11.43 cm x 77.47 cm). Repeat to make the Third Border Bottom.

4 ½" x 50 ½" (11.43 cm x 128.27 cm) Make 2

1 ½" x 22 ½"

www.3wishesfabric.com page 3

Cut 2 – 1 ½" x 20 ½" (3.81 cm x 52.07 cm)

Cut 2 – 1 ½" x 22 ½" (3.81 cm x 57.15 cm)

3. Follow Step 1 and Diagram C using four Plaid squares (4 ½" x 4 ½" / 11.43 cm x 11.43 cm) and two Giraffe/Tiger rectangles (4 ½" x 42 ½" / 11.43 cm x 107.95 cm) to make the Seventh Border Top and Bottom (4 ½" x 50 ½" / 11.43 cm x 128.27 cm).

1 ½" x 40 ½"

1 ½" x 32 ½"

Cut 2 – 1 ½" x 32 ½" (3.81 cm x 82.55 cm)

cm)4½"

Sewing

4 ½" x 30 ½" (11.43 cm x 77.47 cm) Make 2 + Dia. B

Dia. A +

Dia. C

Solid White Flannel (5 8 yd x wof / 57.15 cm x 107.95 cm)

=

1 ½" x 42 ½"

4 ½" x 40 ½" (11.43 cm x 102.877 cm) Make 2

Cut 2 – 1 ½" x 40 ½" (3.81 cm x 102.87 cm)

Seventh Border Top and Bottom

Cut 2 – 1 ½" x 30 ½" (3.81 cm x 77.47 cm)

Cut 4 – 4 ½" x 42 ½" (11.43cm x 107.95

Cut 2 – 1 ½" x 42 ½" (3.81 cm x 107.95 cm)

Fifth Border Top and Bottom

Sides: 2 – Solid White strips (1 ½" x 40 ½" / 3.81 cm x 102.87 cm)

Top and Bottom: Fifth Border Top and Bottom (4 ½" x 40 ½" / 11.43 cm x 102.87 cm)

Sides: 2 – Solid White strips (1 ½" x 30 ½" / 3.81 cm x 77.47 cm)

Quilt 40 ½" x 40 ½" (102.87 cm x 102.87 cm)

Fifth Border

Second Border

Third Border

Top and Bottom: Seventh Border Top and Bottom (4 ½" x 50 ½" / 11.43 cm x 128.27 cm) Quilt 50 ½" x 50 ½" (128.27 cm x 128.27 cm)

Top and Bottom: Third Border Top and Bottom (4 ½" x 30 ½" / 11.43 cm x 77.47 cm)

www.3wishesfabric.com page 4

First Border

Top and Bottom: 2 – Plaid strips (1 ½" x 20 ½" / 3.81 cm x 52.07 cm) Quilt 20 ½" x 20 ½" (52.07 cm x 52.07 cm)

Sides: 2 – Rainbow Clouds rectangles (4 ½" x 22 ½" / 11.43 cm x 57.15 cm)

Quilt 32 ½" x 32 ½" (82.55 cm x 82.55 cm)

Top and Bottom: 2 – Solid White strips (1 ½" x 22 ½" / 3.81 cm x 57.15 cm) Quilt 22 ½" x 22 ½" (57.15 cm x 57.15 cm)

Top and Bottom: 2 – Solid White strips (1 ½" x 32 ½" / 3.81 cm x 82.55 cm)

Sides: 2 – Jungle Friends rectangles (4 ½" x 32 ½" / 11.43 cm x 82.55 cm)

Sixth Border

RST in the order listed. Pin, matching center and ends. Press seams as shown. Measure at each step to ensure the next border will fit. If one border is a little larger than the border it is being sewn to, pin well to ease the fullness and place the fullness on the bottom while sewing.

The Welcome to the Jungle Quilt Top should measure 50 ½" x 50 ½" (128.27 cm x 128.27 cm).

Seventh Border

Sides: 2 – Plaid strips (1 ½" x 18 ½" / 3.81 cm x 46.99 cm)

Top and Bottom: 2 – Solid White strips (1 ½" x 42 ½" / 3.81 cm x 107.95 cm) Quilt 42 ½" x 42 ½" (107.95 cm x 107.95 cm)

Sides: 2 – Solid White strips (1 ½" x 20 ½" / 3.81 cm x 52.07 cm)

Fourth Border

Quilt 30 ½" x 30 ½" (77.47 cm x 77.47 cm)

4. Refer to Diagram D to place the Borders around the Animal Patch square (18 ½" x 18 ½" / 46.99 cm x 46.99 cm). Sew each Border

Sides: 2 – Giraffe/Tiger rectangles (4 ½" x 42 ½" / 11.43 cm x 107.95 cm)

www.3wishesfabric.com page 5 Dia. D ++++++++++++++ Seventh BorderSixth Border Fifth BorderFourthThirdBorderBorderSecond Border First Border + + + + + + + +++ ++++ 50 ½" x 50 ½" (128.27 cm x 128.27 cm)

40 ¼" x 59" (102.24 cm x 149.86 cm)

Dia. E 59" x 59" (149.86 cm x 149.86 cm)

19 ¼" x 29 ¾" (48.9 cm x 75.57 cm)

8. Binding – Follow Diagram F to make the Plaid Binding. Remove selvages and sew the short ends of the six 2 ½" (6.35 cm) x wof strips RST end to end at a 45° angle to make one continuous strip; press seams open. Press one short end ¼" (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

Dia. F

5. Remove the selvages from the Jungle Friends Backing fabric. Cut one piece 40 ¼" x 59" (102.24 cm x 149.86 cm) and two pieces 19 ¼" x 29 ¾" (48.9 cm x 75.57 cm). Pin the two smaller pieces RST on the short edges and sew; press. Pin the two sections RST and sew the long edges as shown in Diagram E. Press seams open or to one side. The Backing should measure 59" x 59" (149.86 cm x 149.86 cm).

Machine wash gentle warm, non chlorine bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low.

Finished Care Instructions

6. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

7. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

19 ¼" x 29 ¾" (48.9 cm x 75.57 cm)

Finishing

• 1/2 yard – Medallion (18010-MLT-CTN-D)

• 1/4 yard – Leopard (18008-MLT-CTN-D)

• 3/8 yard – White on White (18058-WOW-CTN-D)

Leaf

• 5/8 yard Global Animals (18007-MLT-CTN-D)

• 1/3 yard – Zebra (18009-BLK-CTN-D)

• 1 Panel (18005-MLT-CTN-D)

Piecing and Binding

3

Fabric

• 2 1/2 yards – Global Animals (18007-MLT-CTN-D) Backing-Directional

• 1 1/4 yards – Tribal Texture (18006-BLK-CTN-D) for

Wishes® Painted Soul Collection

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! page 1 Featuring the Global Luxe Collection by PI Creative Art Shipping to stores July 2021!

Additional Supplies Needed: 57" x 57" (144.78 cm x 144.78 cm) Cotton batting Piecing and sewing thread Quilting and sewing supplies Even-feed foot (optional for quilting) Quilt

–

3

Needed

Wishes® Global Luxe Collection

– Tree Panel

Zebra (18009-BLK-CTN-D)

Cut - 19 49.53 (3.81 cm 44.45 cm)

2

Tribal Texture (18006-BLK-CTN-D) yards

Cut 5 - 2 ½" (6.35 cm) x wof

½" (3.81 cm x

(Binding)

2 - 2 ½" x 19 ½"

Leopard (18008-MLT-CTN-D)

1 ¼

Cut

Cutting

Cut (6.35

White on White Leaf (18058-WOW-CTN-D) 3⁄8 yard from the Painted Soul Collection 40 - 3" x 3" (7.62 cm x 7.62 cm)

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a 1/4" (6.35 mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric

2 - 1 ½" x 42 ½" (3.81 cm x 107.95 cm)

cm) Cut 2 - 1 ½" x 17 ½"

cm x 49.53 cm) vertical

Use a rotary cutter and acrylic ruler to cut the number of pieces from each fabric listed below.

Cut (6.35

5 - 2 ½" x 9"

2 - 2 ½" x 23 ½" (6.35 cm x 59.69 cm) horizontal Cut 5 - 2 ½" x 9" (6.35 cm x 22.86 cm) horizontal Cut 4 - 3 ½" x 3 ½" (8.89 cm x 8.8917cm)½" x 17 ½" 9" x 19 ½" 9" x 9" 9" x 9" 9" x 9" 9" x 9" 2 ½" x wof 1 ½" x 42 ½" 1 ½" x 40 ½" ½"19x½"2 9"x½"2 2 ½" x 23 ½" 2 ½" x 9" 3 x½" 3 ½" 9" x 19 ½" 3 ½" x 42 ½" 3" x 3"9" x 9" 1 ½" x 19 ½" 1 ½" x 17 ½"

cm x

Cut

Tree Panel (18005-MLT-CTN-D) 1 Panel

Fussy Cut 4 - 9" x 9" (22.86 cm x 22.86 cm)

1⁄3 yard Cut 4 - 9" x 9" (22.86 cm x 22.86 cm)

1 ½" x

2 - 1 ½" x 40 ½"

cm x 22.86 cm) vertical

1⁄4 yard

www.3wishesfabric.com page 2

Fussy Cut 1 - 17 ½" x 17 ½" (44.45 cm x 44.45 cm)

Global Animals (18007-MLT-CTN-D) 5⁄8 yard Fussy Cut 1 - 9" x 19 ½" (22.86 cm x 49.53 cm)

cm)

Fussy Cut 1 - 9" x 19 ½" (22.86 cm x 49.53 cm)

x

Cut (3.81 102.87

Before You Begin

Cut

Medallion (18010-MLT-CTN-D) 1⁄2 yard Cut 4 - 3 ½" x 42 ½" (8.89 cm x 107.95 cm)

www.3wishesfabric.com

1. Draw a diagonal line on the wrong side of a White on White Leaf square 3" x 3" (7.62 cm x 7.62 cm). Place the square on one corner of a Zebra square 9" x 9" (22.86 cm x 22.86 cm), sew on the drawn line and trim 1/4" (6.35 mm) from the sewn line; press. Repeat with the remaining three corners to make a Zebra Unit finishing at 9" x 9" (22.86 cm x 22.86 cm). Make four.

Repeat the technique in Step 1 to make the blocks cut from the Panel. Follow Diagram B using the Panel Unit shown with four White on White Leaf squares 3" x 3" (7.62 cm x 7.62 cm) for each one. Make the last block (Diagram C) using the Global Animals " (22.86 cm x 49.53 cm) and four White on White Leaf squares 3" x 3" (7.62 cm x 7.62 cm).

Refer to Diagram D to add Borders 1 and 2:

: Place a Leopard strip 1 1/2" x 17 1/2" (3.81 cm x 44.45 cm) on each side of the Fussy Cut Tree Panel square 17 (44.45 cm x 44.45 cm). Pin RST, sew and press. Place the Leopard strips 1 Pin RST, sew and press. The Center Panel with Border 1 should measure 19

Zebra Unit¼" (6.35 mm) ( 22.86 cm x 22.86 cm) 9" x 19 ½" (22.86 cm x 49.53 cm) 9" x 19 ½" (22.86 cm x 49.53 cm)

Place a vertical Tribal Texture strip 2 1/2" x 19 1/2" (6.35 cm x 49.53 cm) on each side. Pin RST, sew and press. Place the horizontal Tribal Texture strips 2 1/2" x 23 1/2" (6.35 cm x 59.69 cm) on the top and bottom. Pin RST, sew and press. The Center Panel " x 23 1/2" (59.69 cm x 59.69 cm).

+

Center Panel Unit

Dia. Draw 22.86 cm x 22.86 cm)

Sewing

22.86 cm x 22.86 cm) 9" x 9"

Dia. D

Leopard Panel UnitDia. C

A

= + Dia.

5. Place three vertical Tribal Texture rectangles 2 " x 9" (6.35 cm x 22.86 cm), one Zebra Unit 9" x 9" (22.86 cm x 22.86 cm) and the Lion Panel Unit 9" x 9" (22.86 cm x 22.86 cm) as shown in Diagram F. Pin RST, sew and press to make the Bottom Border 3 finishing at 9" x 23 1/2" (22.86 cm x 59.69 cm).

6. Place three horizontal Tribal Texture rectangles 2 cm x 22.86 cm), one Zebra Unit 9" x 9" (22.86 cm x 22.86 cm), the Rhino Panel Unit 9" x 9" (22.86 cm x 22.86 cm) and the Zebra Panel Unit 9" x 9" (22.86 cm x 22.86 cm) as shown in Diagram G. Pin RST, sew and press to make the Left Side Border 3 finishing at 9" x 32" (22.86 cm x 81.28 cm). G

Zebra Unit Rhino

4. Place two vertical Tribal Texture rectangles 2 " (22.86 cm x 49.53 cm), one Zebra Unit 9" x 9" (22.86 cm x 22.86 cm) and the Leopard Panel Unit 9" x 9" (22.86 cm x 22.86 cm) as shown in Diagram E. Pin RST, sew and press to make the Top Border 3 finishing at 9" x 40

ZebraUnitPanelPanelUnit =

www.3wishesfabric.com

=

8. Place the Bottom Border 3, 9" x 23 " (22.86 cm x 59.69 cm), and the Center Panel Unit 23 shown in Diagram I. Pin RST, sew and press. Place the Left and Right Side Borders 3, 9" x 32" (22.86 cm x 81.28 cm), on each side. Pin RST, sew and press. Place the Top Border 3 as shown. Pin RST, sew and press to make the Quilt Center finishing at 40 9" x 32" (22.86 cm x 81.28 cm)

+++ Dia. H

7. Place two horizontal Tribal Texture rectangles 2 1/2" x 9" (6.35 cm x 22.86 cm), one Zebra Unit 9" x 9" (22.86 cm x 22.86 cm) and the Global Animals Unit 9" x 19 1/2" (22.86 cm x 49.53 cm) as shown in Diagram H. Pin RST, sew and press to make the Right Side Border 3 finishing at 9" x 32" (22.86 cm x 81.28 cm).

+ + =+ + Dia. I Top Border 3 Right Side Border 3

page 5

Right Side Border 3

AnimalsGlobalZebraUnitUnit

Border 5: Place a Medallion rectangle 3 1/2" x 42 1/2" (8.89 cm x 107.95 cm) on each side. Pin RST, sew and press. Place the Top and Bottom Borders 5, 3 1/2" x 48 1/2" (8.89 cm x 123.19 cm) on the top and bottom. Pin RST, sew and press. The Global Luxe Quilt Top should measure 48 (8.89

Dia. J Top & Bottom Border 5 + + = 3 ½" x 48 ½"

10. Refer to Diagram K to add Borders 4 and 5:

cm x 123.19 cm) Make 2 4BorderLeft5BorderLeft 4BorderRight 5BorderRight =+ + Dia. K 5/13

Border 4: Place a Tribal Texture strip 1 1/2" x 40 1/2" (3.81 cm x 102.87 cm) on each side of the Quilt Center 40 1/2" x 40 1/2" (102.87 cm x 102.87 cm). Pin RST, sew and press. Place the Tribal Texture strips 1 1/2" x 42 1/2" (3.81 cm x 107.95 cm) on the top and bottom. Pin RST, sew and press. The Quilt Center with Border 4 should measure 42 1/2" x 42 1/2" (107.95 cm x 107.95 cm).

www.3wishesfabric.com page 6 9. Place a Tribal Texture square 3 1/2" x 3 1/2" (8.89 cm x 8.89 cm) on each side of a Medallion rectangle 3 1/2" x 42 1/2" (8.89 cm x 107.95 cm) as shown in Diagram J. Pin RST, sew and press to make the Top Border 5, 3 1/2" x 48 1/2" (8.89 cm x 123.19 cm). Repeat to make the Bottom Border 5.

13. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

www.3wishesfabric.com page 7 Dia. M

Global Animals (18007-MLT-CTN-D) 2 ½ yards

Cut 2 - 17 ¼" x 28 ¾" (43.82 cm x 73.03 cm)

57" x 57" (144.78 cm x 144.78 cm)

Backing

Finished Care Instructions

12. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

Cut 1 - 40 ¼" x 57" (102.24 cm x 144.78 cm)

Finishing

11. Remove the selvages from the Global Animals Backing fabric. Note: Fabric is directional. Cut one piece 40 1/4" x 57" (102.87 cm x 144.78 cm) and two pieces 17 1/4" x 28 ¾" (43.82 cm x 73.03 cm). Pin the two smaller pieces RST on the short edges and sew; press. Pin the two sections RST and sew the long edges as shown in Diagram L. Press seams open or to one side. The Backing should measure 57" x 57" (144.78 cm x 144.78 cm).

14. Follow Diagram M to make the Tribal Texture Binding. Remove selvages and sew the short ends of the five 2 1/2" (6.35 cm) x wof strips RST end to end at a 45˚ angle to make one continuous strip; press seams open. Press one short end 1/4" (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

Machine wash in cold water; gentle cycle. Do not Bleach. Tip: Before drying, check for fabric dyes that may have run. If fabric dyes run, rewash and rinse using a color catcher to absorb loose dye. Lay flat to dry or tumble dry low.

•

• (18024-MLT-CTN-D)

½ yard – Words

1 ⁄3 yard – Pink/Blue Rings

7⁄8 yard – Red/Blue Glasses (18025-MLT-CTN-D) for Piecing and Binding

¾ yard – Orange/Yellow Ice

2 ¾ yards – Fruit

for Backing Additional Supplies Needed: • 64" x 64" (162.56 cm x 162.56 cm) Cotton batting • ½ yard (17" x 18" / 43.18 cm x 45.72 cm) Lightweight fusible web • Piecing and sewing thread • Quilting and sewing supplies • Even-feed foot (optional for quilting) • Pressing cloth Finished Size: 56" x 56" (142.24 cm x 142.24 cm) Quilt

1 3⁄8 yards – Mixed Drinks (18016-MLT-CTN-D)

• (18020-WHT-CTN-D)

• (18023-MLT-CTN-D)

• (18018-WHT-CTN-D)

½ yard – Green/Blue Ice

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! page 1 Shipping to stores July 2021! Fabric Needed 3 Wishes Fabric® Mixology Collection

7⁄8 yard – White Solid

•

• (18022-MLT-CTN-D)

• (18020-WHT-CTN-D)

1 ⁄3 yard – Fruit

• (18021-MLT-CTN-D)

¼ yard – Yellow/Green Rings

•

Use a rotary cutter and acrylic ruler to cut the number of square and rectangular pieces from each fabric listed below. Set aside the remaining fabric for making the appliqués.

Fussy Cut 4 - Sm. Glass Appliqués from Template

Cut 8 - 4 ½" x 4 ½" (11.43 cm x 11.43 cm)

Cut 2 - 1 ¼" x 8 ½" (3.18 cm x 21.59 cm)

Before You Begin

Fussy Cut 4 - 5" x 28 ¼" (12.7 cm x 71.76 cm) horizontal

Red/Blue Glasses (18025-MLT-CTN-D) 7 8 yard

Cut 2 - 1 ½" x 39" (3.81 cm x 99.06 cm)

Mixed Drinks (18016-MLT-CTN-D) 1 3 8 yards

Fussy Cut 2 - 5" x 47" (12.7 cm x 119.38 cm) vertical

Cut 12 - 2" x 8 ½" (5.08 cm x 21.59 cm)

Orange/Yellow Ice (18024-MLT-CTN-D) 3 4 yard Cut 4 - 5 ¼" x 5 ¼" (13.34 cm x 13.34 cm) Fussy Cut 16 - 4 ½" x 4 ½" (11.43 cm x 11.43 cm) Fussy Cut 1 - Lg. Glass Appliqué from Template 5" x 47" 5" x 28 ¼" 4 x½" 4 ½"2 ½" x wof 1 ½" x 39" 1 ½" x 37" 5 x¼" 5 ¼" 5 x¼" 5 ¼" 4 x½" 4 ½" 4 x½" 4 ½" 4 ½" x 7" 2" x 8 ½" 1 ¼" x 8 ½" "4x2"½ 1 ¼" x 10"

Fussy Cut 1 - Lg. Glass Appliqué from Template

Cut 4 - 4 ½" x 7" (11.43 cm x 17.78 cm)

Cut 6 - 2 ½" (6.35 cm) x wof (for Binding)

Cut 2 - 1 ¼" x 10" (3.18 cm x 25.4 cm)

Cutting

Cut 16 - 5 ¼" x 5 ¼" (13.34 cm x 13.34 cm)

Cut 2 - 1 ½" x 37" (3.81 cm x 93.98 cm)

www.3wishesfabric.com page 2

Cut 4 - 2" x 4 ½" (5.08 cm x 11.43 cm)

White Solid 7 8 yard

Read all instructions before beginning project. Do not pre-wash fabrics. Note: Take special care when pressing glitter fabrics. Always press from the wrong side or use a pressing cloth. Use a pressing cloth when fusing appliqué shapes. Press fabrics with a dry iron on cotton setting before cutting. Use a ¼" (6.35 mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric. Print Appliqué Templates at 100% scale.

Cut 8 - 4 ½" x 4 ½" (11.43 cm x 11.43 cm)

Sewing

Fussy Cut 4 - Sm. Glass Appliqués

cm x 5.08 cm) vertical Fussy Cut 1 - Lg. Glass Appliqué from Template 2" x 2" 5 x¼" 5 ¼" 5 x¼" 5 ¼" 4 x½" 4 ½" 4 x½" 4 ½" 2" x 8 ½" ½"8x2" 8 ½" x 8 ½" 4 x½" 4 ½"

www.3wishesfabric.com page 3

Cut 4 - 5 ¼" x 5 ¼" (13.34 cm x 13.34 cm)

Cut 4 - 4 ½" x 4 ½" (11.43 cm x 11.43 cm)

Green/Blue Ice Wrong Side Fussy Cut 1 - Lg. Glass Appliqué Yellow/Green Rings Wrong Side Fussy Cut 1 - Lg. Glass Appliqué Pink/Blue Rings Wrong Side Fussy Cut 1 - Lg. Glass Appliqué

Fussy Cut 1 - Lg. Glass Appliqué

Ice Wrong Side

2. Refer to Diagram B to place the fusible web appliqué pieces on the wrong side of each fabric, adhesive side down. Fuse according to the manufacturer’s directions. Cut out on the traced lines. Remove paper backing.

1. Use the templates provided to trace the number of appliqué shapes on the paper side of fusible web as shown in Diagram A. Leave ¼" (6.35 mm) between shapes and cut out 1⁄8" (3.18 mm) outside the traced line.

Cut 5 - 8 ½" x 8 ½" (21.59 cm x 21.59 cm)

Yellow/Green Rings (18023-MLT-CTN-D) 1⁄4 yard

Pink/Blue Rings (18021-MLT-CTN-D) 1 3 yard

Cut 4 - 2" x 8 ½" (5.08 cm x 21.59 cm) vertical

Fussy Cut 4 - 4 ½" x 4 ½" (11.43 cm x 11.43 cm)

Words (18018-MLT-CTN-D) 1 2 yard

Red/Blue

Glasses Wrong Side

Fussy Cut 1 - Lg. Glass Appliqué

Fussy Cut 1 - Lg. Glass Appliqué from Template

Fruit (18020-WHT-CTN-D) 1⁄3 yard

Lightweight Fusible Web 17" x 18" (43.18 cm x 45.72 cm) Cut 5 - Lg. Glass Appliqués from Template Cut 4 - Sm. Glass Appliqués from Template Dia. A Dia. B

Cut 8 - 5 ¼" x 5 ¼" (13.34 cm x 13.34 cm)

Fussy Cut 1 - Lg. Glass Appliqué from Template

Orange/Yellow

Cut 4 - 2" x 8 ½" (5.08 cm x 21.59 cm) horizontal

Fussy Cut 8 - 2" x 2" (5.08

Green/Blue Ice (18022-MLT-CTN-D) 1⁄2 yard

Lg.

7. Place two Fruit vertical rectangles and one White Solid rectangle 2" x 8 ½" (5.08 cm x 21.59 cm), two Four Square Blocks, the Lg. Glass Appliqué Orange/Yellow Ice Block and the Lg. Glass Appliqué Green/Blue Ice Block 8 ½" x 8 ½" (21.59 cm x 21.59 cm) as shown in Diagram G. Pin RST, sew and press to make Row 1 finishing at 8 ½" x 37" (21.59 cm x 93.98 cm).

4 ½" x 7" (11.43 cm x 17.78 cm) Make 2

Lg. Glass Orange/YellowAppliquéIceBlock

Center Block

www.3wishesfabric.com page 4

8 ½" x 8 ½" (21.59 cm x 21.59 cm)

Fuse to Right side

Dia. E

Dia.

RowRowF12 + + + = = =

Note: Use a pressing cloth Buttonhole Stitch Zigzag Stitch

Sm. GlassBlockAppliqué1

8 ½" x 8 ½" (21.59 cm x 21.59 cm)

Dia. C

Dia. D Lg. Glass Appliqué Red/Blue Glasses Block

Sm. GlassBlockAppliqué2

Lg. Glass Appliqué Pink/Blue Rings Block

4 ½" x 7" (11.43 cm x 17.78 cm) Make 2

Lg. Glass Yellow/GreenAppliquéRingsBlock

8 ½" x 8 ½" (21.59 cm x 21.59 cm)

Dia. G + + + + + + =

Four Square Block

8 ½" x 8 ½" (21.59 cm x 21.59 cm)

+++ + =

5. Place a White Solid strip 1 ¼" x 8 ½" (3.18 cm x 21.59 cm) on each side of the Lg. Glass Red/Blue Glasses Appliqué Block as shown in Diagram E. Pin RST, sew and press. Place a White Solid strip 1 ¼" x 10" (3.18 cm x 25.4 cm) on the top and bottom. Pin RST, sew and press to make the Center Block 10" x 10" (25.4 cm x 25.4 cm).

3. Refer to Diagram C to position a Sm. Glass Appliqué shape on a White Solid rectangle 4 ½" x 7" (11.43 cm x 17.78 cm) at a slight angle, leaving a ¼" (6.35 mm) seam allowance around all sides. Use a pressing cloth and fuse to the right side of the fabric according to the manufacturer’s directions. Use a coordinating thread and small buttonhole or zig-zag stitch to secure and finish the edges. The Sm. Glass Appliqué 1 Block should measure 4 ½" x 7" (11.43 cm x 17.78 cm). Make two. Repeat to make two Sm. Appliqué Glass 2 Blocks, positioning the Sm. Glass Appliqué shape at an angle opposite to the Sm. Glass Appliqué 1 Block as shown.

8 ½" x 8 ½" (21.59 cm x 21.59 cm) Glass Green/BlueAppliquéIceBlock

6. Place one White Solid, two Fussy Cut Orange/Yellow Ice and one Mixed Drinks squares 4 ½" x 4 ½" (11.43 cm x 11.43 cm) in two rows as shown in Diagram F. Pin the pieces in each row RST, sew and press. Pin the rows RST matching seams, sew and press to make one Four Square Block 8 ½" x 8 ½" (21.59 cm x 21.59 cm). Make eight.

8 ½" x 8 ½" (21.59 cm x 21.59 cm) Make 8 Row 1 8 ½" x 37" (21.59 cm x 93.98 cm)

4. Follow Step 3 to make the Lg. Glass Appliqué Blocks. Use a Words square 8 ½" x 8 ½" (21.59 cm x 21.59 cm) for each background and place the Lg. Glass Appliqué shapes as shown in Diagram D.

=

10" x 10" (25.4 cm x 25.4 cm)

Column 1: One White Solid rectangle 2" x 8 ½" (5.08 cm x 21.59 cm), two Four Square Blocks 8 ½" x 8 ½" (21.59 cm x 21.59 cm).

Make

www.3wishesfabric.com page 5

Dia. H + + + + + + = Row 5 8

14"

11. Place four Fruit squares 4 ½" x 4 ½" (11.43 cm x 11.43 cm), two White Solid rectangles 2" x 4 ½" (5.08 cm x 11.43 cm) and the Center Block in three rows as shown in Diagram K. Pin the pieces in each row RST, sew and press. Pin the rows RST, sew and press to make Row 3 Center Unit 10" x 18" (25.4 cm x 45.72 cm). ½" x 37" (21.59 cm x 93.98 cm) x 37" (5.08 cm x 93.98 cm) 2 x 18" (35.56 cm x 45.72 cm) 2 x 18" (25.4 cm x 45.72 cm)

8. Place two Fruit vertical rectangles and one White Solid rectangle 2" x 8 ½" (5.08 cm x 21.59 cm), two Four Square Blocks, the Lg. Glass Appliqué Pink/Blue Rings Block and the Lg. Glass Appliqué Yellow/Green Rings Block 8 ½" x 8 ½" (21.59 cm x 21.59 cm) as shown in Diagram H. Pin RST, sew and press to make Row 5 finishing at 8 ½" x 37" (21.59 cm x 93.98 cm).

Dia. J ++ ++ + + + ==+++ Col. 1 Col. 1 Col. 2 Col. 2 Col. 3 Col. 3 Row 3 Side Unit 10"

9. Place two Fruit horizontal rectangles and two White Solid rectangles 2" x 8 ½" (5.08 cm x 21.59 cm) and three Fussy Cut Pink/Blue Rings squares 2" x 2" (5.08 cm x 5.08 cm) as shown in Diagram I. Pin RST, sew and press to make Row 2 finishing at 2" x 37" (5.08 cm x 93.98 cm). Repeat to make Row 4.

Column 2: Two White Solid rectangles 2" x 8 ½" (5.08 cm x 21.59 cm), one Fussy Cut Pink/Blue Rings square 2" x 2" (5.08 cm x 5.08 cm).

10. Place the pieces in three columns as shown in Diagram J. Pin the pieces in each column RST, sew and press. Pin the columns RST matching seams, sew and press to make Row 3 Side Unit 14" x 18" (35.56 cm x 45.72 cm). Make 2.

Column 3: One White Solid rectangle 2" x 4 ½" (5.08 cm x 11.43 cm), two Fussy Cut Green/Blue Ice and two Fruit squares 4 ½" x 4 ½" (11.43 cm x 11.43 cm).

Make

Dia. K + + ++ + + == = Row 3 Center Unit Row 1 Row 2 Row 3

Dia. I + + + + + + = Rows 2 & 4 2"

Draw Wrong side Sew Cut Press 5 ¼" x 5 ¼" (13.34 cm x 13.34 cm) Make 16

14. Draw a diagonal line on the wrong side of a White Solid square 5 ¼" x 5 ¼" (13.34 cm x 13.34 cm) as shown in Diagram N. Place on top of a Green/Blue Ice square 5 ¼" x 5 ¼" (13.34 cm x 13.34 cm) with right sides together and sew ¼" (6.35 mm) away from the line on both sides. Cut on the drawn line; press. Two squares yield two Half-Square Triangle Units. Do not trim.

www.3wishesfabric.com page 6 12. Place the two Row 3 Side Units 14" x 18" (35.56 cm x 45.72 cm) and the Row 3 Center Unit 10" x 18" (25.4 cm x 45.72 cm) as shown in Diagram L. Pin RST, sew and press to make Row 3 finishing at 18" x 37" (45.72 cm x 93.98 cm).

Green/Blue Ice Hourglass Block ¼" (6.35 mm)

Sew

Half-Square Triangle Unit¼" (6.35 mm)

Square up to 4 ½" x 4 ½" (11.43 cm x 11.43 cm) 4 ½" x 4 ½" (11.43 cm x 11.43 cm) 16

Dia. L + + = Row 3 Dia.

Row

15. Draw a diagonal line on the wrong side of one Half-Square Triangle Unit with the line crossing the seam as shown in Diagram O. Place the two Half-Square Triangle Units RST with contrasting colors on opposite sides and seams nesting against each other; pin. Sew ¼" (6.35 mm) away from the line on both sides. Cut on the drawn line; press. Trim square 4 ½" x 4 ½" (11.43 cm x 11.43 cm), keeping the “X” centered. Make 16 Green/Blue Ice Hourglass Blocks finishing at 4 ½" x 4 ½" (11.43 cm x 11.43 cm).

++++ = Dia.

Dia. O Draw Wrong side & Cut Press Right side

13. Place Rows 1-5 as shown in Diagram M. Pin RST matching ends and seams, sew and press to make the Quilt Center 37" x 37" (93.98 cm x 93.98 cm).

Make

18" x 37" (45.72 cm x 93.98 cm) M Quilt Center 1 Row 2 Row 3 Row 4 Row 5 37" x 37" (93.98 cm x 93.98 cm) N

4 ½" x 4 ½" (11.43 cm x 11.43 cm)

Hourglass

17. Follow Steps 14 and 15 and Diagram Q using four White Solid and four Yellow/Green Rings squares 5 ¼" x 5 ¼" (13.34 cm x 13.34 cm) to make eight Yellow/Green Rings Hourglass Blocks finishing at 4 ½" x 4 ½" (11.43 cm x 11.43 cm).

21. Follow Step 20 and Diagram U to place two Fussy Cut Pink/Blue Rings squares, two Orange/Yellow Ice Hourglass Blocks, two Yellow/Green Rings Hourglass Blocks, four Green/Blue Ice Hourglass Blocks 4 ½" x 4 ½" (11.43 cm x 11.43 cm) one Sm. Glass Appliqué Block 2 (4 ½" x 7" / 11.43 cm x 17.78 cm) to make the Hourglass Bottom Border (4 ½" x 47" / 11.43 cm x 119.38 cm).

=

4

Dia. S HourglassBorder2 ½" x 47" (11.43 cm x 119.38 cm)

Make 8

Dia. T + + = Dia.

Orange/Yellow Ice Hourglass Block Dia. Q 4 ½" x 4 ½" (11.43 cm x 11.43 cm) Make 8

20. Place two Fussy Cut Pink/Blue Rings squares, two Orange/Yellow Ice Hourglass Blocks, two Yellow/Green Rings Hourglass Blocks, four Green/Blue Ice Hourglass Blocks 4 ½" x 4 ½" (11.43 cm x 11.43 cm) and one Sm. Glass Appliqué Block 1 (4 ½" x 7" / 11.43 cm x 17.78 cm) as shown in Diagram T. Pin RST, sew and press to make the Hourglass Top Border (4 ½" x 47" / 11.43 cm x 119.38 cm).

19. Follow Step 18 and Diagram S to place two Orange/Yellow Ice, two Yellow/Green Rings and four Green/Blue Ice Hourglass Blocks 4 ½" x 4 ½" (11.43 cm x 11.43 cm) and one Sm. Glass Appliqué Block 2 (4 ½" x 7" / 11.43 cm x 17.78 cm) to make Hourglass Border 2 (4 ½" x 39" / 11.43 cm x 99.06 cm).

Dia. P

16. Follow Steps 14 and 15 and Diagram P using four White Solid and four Orange/Yellow Ice squares 5 ¼" x 5 ¼" (13.34 cm x 13.34 cm) to make eight Orange/Yellow Ice Hourglass Blocks finishing at 4 ½" x 4 ½" (11.43 cm x 11.43 cm).

www.3wishesfabric.com page 7

++++++++

Dia. R

HourglassBorder1 4 ½" x 39" (11.43 cm x 99.06 cm)

Hourglass Top Border U ½" x 47" (11.43 cm x 119.38 cm) Bottom Border

18. Place two Orange/Yellow Ice, two Yellow/Green Rings and four Green/Blue Ice Hourglass Blocks 4 ½" x 4 ½" (11.43 cm x 11.43 cm) and one Sm. Glass Appliqué Block 1 (4 ½" x 7" / 11.43 cm x 17.78 cm) as shown in Diagram R. Pin RST, sew and press to make Hourglass Border 1 (4 ½" x 39" / 11.43 cm x 99.06 cm).

+ + + + + + + + 4

Yellow/Green Rings Hourglass Block 4 ½" x 39" (11.43 cm x 99.06 cm)

• Sides: (2) Fussy Cut vertical Mixed Drinks rectangles 5" x 47" (12.7 cm x 119.38 cm)

5" x 56" (12.7 cm x 142.24 cm) Drinks Top and Bottom Borders

Make 2 + Mixed

Quilt Top finishes at 47" x 47" (119.38 cm x 119.38 cm).

www.3wishesfabric.com page 8

Quilt Top finishes at 39" x 39" (99.06 cm x 99.06 cm).

• Top: Hourglass Top Border 4 ½" x 47" (11.43 cm x 119.38 cm)

• Top and Bottom: (2) Red/Blue Glasses strips 1 ½" x 39" (3.81 cm x 99.06 cm)

• Top and Bottom: (2) Mixed Drinks Top and Bottom Borders 5" x 56" (12.7 cm x 142.24 cm)

Dia. V

Red/Blue Glasses Border 1:

• Bottom: Hourglass Bottom Border 4 ½" x 47" (11.43 cm x 119.38 cm)

22. Place two horizontal Fussy Cut Mixed Drinks rectangles 5" x 28 ¼" (12.7 cm x 71.76 cm) as shown in Diagram V. Pin RST on the short ends, sew and press to make the Mixed Drinks Top Border 5" x 56" (12.7 cm x 142.24 cm). Repeat to make the Mixed Drinks Bottom Border.

Mixology Quilt Top

Dia. W 56" x 56" (142.24 cm x 142.24 cm)

Hourglass Border 2:

23. Refer to Diagram W to place the Borders around the Quilt Center 37" x 37" (93.98 cm x 93.98 cm). Sew each Border RST in the order listed. Pin, matching center and ends. Press seams as shown. Measure at each step to ensure the next border will fit. If one border is a little larger than the border it is being sewn to, pin well to ease the fullness and place the fullness on the bottom while sewing.

++++++ ++++ + +

Quilt Top finishes at 56" x 56" (142.24 cm x 142.24 cm).

• Left Side: Hourglass Border 1 4 ½" x 39" (11.43 cm x 99.06 cm)

• Sides: (2) Red/Blue Glasses strips 1 ½" x 37" (3.81 cm x 93.98 cm)

Mixed Drinks Border 3:

• Right Side: Hourglass Border 2 4 ½" x 39" (11.43 cm x 99.06 cm)

26. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

Dia. X Fruit (18020-WHT-CTN-D) 2 ¾ yards

Finished Care Instructions

Finishing

24. Remove the selvages from the Fruit Backing fabric. Cut two pieces 40 ¼" x 64" (102.24 cm x 162.56 cm), two pieces 24 ¼" x 32 ¼" (61.6 cm x 81.92 cm). Pin RST and sew the two smaller pieces on the short edges; press. Pin the two sections RST and sew along the long edges as shown in Diagram X. Press the seam open or to one side. The Backing should measure 64" x 64" (162.56 cm x 162.56 cm).

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Beforedrying,checkforfabricdyesthatmayhaverun. Iffabricdyes run,rewashandrinseusingacolorcatchertoabsorbloosedye. Lay flat to dry or tumble dry low.

24 ¼" x 32 ¼" (61.6 cm x 81.92 cm)

Backing

Cut 1 - 40 ¼" x 64" (102.24 cm x 162.56 cm)

Cut 2 - 24 ¼" x 32 ¼" (61.6 cm x 81.92 cm)

27. Follow Diagram Y to make the Red/Blue Glasses Binding. Remove selvages and sew the short ends of the six 2 ½" (6.35 cm) x wof strips RST end to end at a 45˚ angle to make one continuous strip; press seams open. Press one short end ¼" (6.35 mm) to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08 cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch.

24 ¼" x 32 ¼" (61.6 cm x 81.92 cm)

25. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

www.3wishesfabric.com page 9

40 ¼" x 64" (102.24cm x 162.56cm)

64" x 64" (162.56 cm x 162.56 cm)

Dia. Y

Fussy Cut 1 - Yellow/Green Rings

Sm. Glass Template

Fussy Cut 1 - Pink/Blue Rings

Fussy Cut 4 - Red/Blue Glasses

Scale: 1 square = 1" x 1"

Appliqué Template (100% Scale)

3" (7.62 cm)

(9.373.69"cm)

Lg. Glass Template

5" (12.7 cm)

(15.66.14"cm)

Fussy Cut 1 - Red/Blue Glasses

Fussy Cut 1 - Green/Blue Ice

Fussy Cut 1 - Orange/Yellow Ice

www.3wishesfabric.com page 10

Follow Step 1 to trace templates on the paper side of fusible web.

1 Panel – Record Panel (18003-MLT-CTN-D)

1 ⁄3 yard – Music Notes (18000-MLT-CTN-D)

1 yard – Allover Records (18001-MLT-CTN-D)

Featuring the Rhythm & Hues Collection by Connie Haley Shipping to stores July 2021!

•

3/4 yard – Piano Keys (17997-WHT-CTN-D)

2 ½ yards – Instruments (18002-WHT-CTN-D) for Backing Additional Supplies Needed: • 57" x 57" (144.78cm x 144.78cm) Cotton batting • Piecing and sewing thread • Quilting and sewing supplies • Even-feed foot (optional for quilting) Finished Size: 48 ½" x 48 ½" (123.19cm x 123.19cm) Quilt

Fabric Needed 3 Wishes® Rhythm & Hues Collection

1 ⁄3 yard – Color Vibe (17996-MLT-CTN-D)

•

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! page 1

•

½ yard – Music Words (18004-MLT-CTN-D) for Piecing and Binding

•

www.3wishesfabric.com page 2

Before

You Begin Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a ¼" (6.35mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric Cutting Use a rotary cutter and acrylic ruler to cut the number of pieces from each fabric listed below. Record Panel (18003-MLT-CTN-D) 1 Panel Fussy Cut 1 34" x 34" (86.36cm x 86.36cm) Piano Keys (17997-WHT-CTN-D) ¾ Yard Fussy Cut 4 3 ½" x 36 ½" (8.89cm x 92.71cm) Music Words (18004-MLT-CTN-D) ½ Yard Cut 5 – 2 ½" (6.35cm) x wof (Binding) Cut 4 3 ½" x 3 ½" (8.89cm x 8.89cm) Color Vibe (17996-MLT-CTN-D) 1 3 Yard Cut 2 – 1 ¾" x 36 ½" (4.44cm x 92.71cm) Cut 2 – 1 ¾" x 34" (4.44cm x 86.36cm) Music Notes (18000-MLT-CTN-D) 1⁄3 Yard Fussy Cut 8 3 ½" x 3 ½" (8.89cm x 8.89cm) Allover Records (18001-MLT-CTN-D) 1 Yard Fussy Cut 4 3 ½" x 36 ½" (8.89cm x 92.71cm) Fussy Cut 4 3 ½" x 3 ½" (8.89cm x 8.89cm)3½"x 36 ½" 3 ½" x 36 ½" 2 ½" x wof 1 ¾" x 36 ½" 1 ¾" x 34" 3 x½" 3 ½" 3 x½" 3 ½" 3 x½" 3 ½"

www.3wishesfabric.com page 3

1. Place a Color Vibe strip (1 3/4" x 34") on each side of the Fussy Cut Record Panel 34" x 34" (86.36cm x 86.36cm) as shown in Diagram A. Pin RST, sew and press. Place a Color Vibes strip 1 3/4" x 36 ½" (4.45cm x 92.71cm) on the top and bottom. Pin RST, sew and press to make the Quilt Center 36 ½" x 36 ½" (92.71cm x 92.71cm).

Diagram D. Pin RST on the long edges, sew and press to make the Left Side Border 6 ½" x 36 ½" (16.51cm x 92.71cm). 5. Follow Step 4 and Diagram E to make the Right Side Border 6 ½" x 36 ½" (16.51cm x 92.71cm). Dia. A ++ 36 ½" x 36 ½" (92.71cm x 92.71cm) Quilt Center Dia. RowRowB12 + += = + 6 ½" x 6 ½" (16.51cm x 16.51cm) Top Left Corner Dia. C 6 ½" x 6 ½" (16.51cm x 16.51cm) TopCornerRight 6 ½" x 6 ½" (16.51cm x 16.51cm) BottomCornerLeft 6 ½" x 6 ½" (16.51cm x 16.51cm) BottomCornerRight Dia. D =+ 6 ½" x 36 ½" (16.51cm x 92.71cm) Left Side Border Dia. E =+ 6 ½" x 36 ½" (16.51cm x 92.71cm) Right Side Border

Sewing

2. Place one Fussy Cut Allover Records, one Music Words and two Fussy Cut Music Notes squares 3 ½" x 3 ½" (8.89cm x 8.89cm) in two rows as shown in Diagram B. Pin the squares in each row RST, sew and press. Pin the rows RST matching seams, sew and press to make the Top Left Corner 6 ½" x 6 ½" (16.51cm x 16.51cm).

4.

3. Follow Step 2 and Diagram C to make the Top Right, Bottom Left and Bottom Right Corners 6 ½" x 6 ½" (16.51cm x 16.51cm). Place one Fussy Cut Piano Keys and one Fussy Cut Allover Records rectangle 3 ½" x 36 ½" (8.89cm x 92.71cm) as shown in

Note: Check orientation of fabrics.

6. Follow Step 4 and Diagram F to make the Top Border Center 6 ½" x 36 ½" (16.51cm x 92.71cm). Place the Top Left and Right Corners 6 ½" x 6 ½" (16.51cm x 16.51cm) on each side as shown. Pin RST, sew and press to make the Top Border 6 ½" x 48 ½" (16.51cm x 123.19cm).

Dia. F + + Top Left Corner 6 ½" x 36 ½" (16.51cm

8. Place the Quilt Center 36 ½" x 36 ½" (92.71cm x 92.71cm), Left and Right Side Borders 6 ½" x 36 ½" (16.51cm x 92.71cm) and the Top and Bottom Borders 6 ½" x 48 ½" (16.51cm x 123.19cm) as shown in Diagram H. Pin the Sides to the Center, RST matching ends and middle, sew and press. Pin the Top and Bottom, RST matching ends, middle and seams, sew and press. The Rhythm & Hues Quilt Top should measure 48 ½" x 48 ½" (123.19cm x 123.19cm). x 92.71cm) x 123.19cm)

Top Border Center 6 ½" x 48 ½" (16.51cm

Top Border = Top Right Corner Dia. G + + LeftBottomCorner 6 ½" x 36 ½" (16.51cm x 92.71cm) Bottom Border Center 6 ½" x 48 ½" (16.51cm x 123.19cm) Bottom Border = BottomCornerRight Dia. H 48 ½" x 48 ½" (123.19cm x 123.19cm) Rhythm & Hues Quilt Top + +++

www.3wishesfabric.com page 4

7. Follow Step 4 and Diagram G to make the Bottom Border Center 6 ½" x 36 ½" (16.51cm x 92.71cm). Place the Bottom Left and Right Corners 6 ½" x 6 ½" (16.51cm x 16.51cm) on each side as shown. Pin RST, sew and press to make the Bottom Border 6 ½" x 48 ½" (16.51cm x 123.19cm).

Backing 17 ¼" x 28 ¾" 17 ¼" x 28 ¾" 40 ¼" x 57"

Finishing

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Beforedrying,checkforfabricdyesthatmayhaverun. Iffabricdyes run,rewashandrinseusingacolorcatchertoabsorbloosedye. Lay flat to dry or tumble dry low.

Dia. J

Dia. I 57"

12. Follow Diagram J to make the Music Words Binding. Remove selvages and sew the short ends of the five 2 ½" x wof strips RST end to end at a 45˚ angle to make one continuous strip; press seams open. Press one short end ¼" to the wrong side. Fold in half lengthwise with wrong sides together; press. Leaving a 2" (5.08cm) tail on the folded end, place cut edges of folded Binding even with the edge of the Quilt Top and sew, mitering the corners. Overlap ends, trim any excess and finish sewing the Binding. Fold Binding over to back and hand stitch. x 57" (144.78cm x 144.78cm)

10. Press finished Quilt Top and Backing. Tape the Backing, wrong side up, to a firm surface. Layer Batting and Quilt Top (right side up). Baste the layers together with safety pins. Quilt as desired.

9. Remove the selvages from the Instruments Backing fabric. Note: Check orientation of fabrics. Cut one piece 40 ¼" x 57" (102.24cm x 144.78cm) and two pieces 17 ¼" x 28 3/4" (43.82cm x 73.03cm). Pin the two smaller pieces RST on the short edges and sew; press. Pin the two sections RST and sew along the long edges as shown in Diagram I. Press seams open or to one side. The Backing should measure 57" x 57" (144.78cm x 144.78cm).

Finished Care Instructions

11. Once quilting is complete, square up corners and edges, trimming excess Backing and Batting even with the Quilt Top.

www.3wishesfabric.com page 5

Any questions? Email us at help@askaquilter.com or call 888-912-7238. www.3wishesfabric.com Fo ow us here to s m e exciting projects and ideas! page 1 Fabric Needed 3 Wishes® Rhythm & Hues Collection • 1 Panel – Music Squares Panel (17995-MLT-CTN-D) • 1/4 yard – Color Vibe (17996-MLT-CTN-D) • 1/4 yard – Music Words (18004-MLT-CTN-D) • 1/2 yard – Piano Keys (17997-WHT-CTN-D) Optional Backing for a Single Wall Hanging (not reversible) Additional Supplies Needed: • 14" x 35" (35.56cm x 88.9cm) Cotton batting • Chopstick • Piecing and sewing thread • Quilting and sewing supplies • Even-feed foot (optional for quilting) Finished Size: 12 1/2" x 33" (31.75cm x 83.82cm) FRONT BACK Reversible Wall Hanging

(17995-MLT-CTN-D)

www.3wishesfabric.com page 2

33.02cm)13"x33 1/2" 2" x 302"1/2"x 13"2 1/2" x 5 1/2" Music Words

Cutting

Read all instructions before beginning project. Do not pre-wash fabrics. Press fabrics with a dry iron on cotton setting before cutting. Use a 1/4" (6.35mm) seam allowance and sew fabrics with right sides together (RST) unless otherwise noted. Press seams in the direction of the arrows. wof = width of fabric

30

Piano Keys (17997-WHT-CTN-D) ½ Yard Optional Backing for making a single, non-reversible Wall Hanging Cut 1 13" x 33

Color Vibe

Cut 2

x 77.47cm) Cut 2 – 2 1/2" x 5 1/2"

Music

1⁄4 Yard Cut 2 –

Cut 2 –

Fussy Cut 2 10"

13.97cm) Cut 2 - 2" x 13" (5.08cm x 2"33.02cm)x301/2"2"x 13"2 1/2" x 5 1/2"

Use a rotary cutter and acrylic ruler to cut the number of pieces from each fabric listed below. Squares Panel 1 Panel x 1/2" (25.4cm x 77.47cm) - Cut 1 if doing the single non-revsersible option 1/2" (33.02cm x 85.09cm) (17996-MLT-CTN-D) 2" x 30 1/2" (5.08cm x 77.47cm) 2 1/2" x 5 1/2" (6.35cm x 13.97cm) - 2" x 13" (5.08cm x (18004-MLT-CTN-D) (5.08cm (6.35cm x

1⁄4 Yard Cut 2 – 2" x 30 1/2"

Before You Begin

+ + =++ Dia. C Sew RST 4

= Fold RST Sew Fold

Fold

1. Place a Color Vibe strip 2" x 30 1/2" (5.08cm x 77.47cm) on each side of the Fussy Cut Music Squares Panel A 10" x 30 1/2" (25.4cm x 77.47cm) as shown in Diagram A. Pin RST, sew and press. Place a Color Vibes strip 2" x 13" (5.08cm x 33.02cm) on the top and bottom. Pin RST, sew and press to make the Side A 13" x 33 1/2" (33.02cm x 85.09cm).

Sewing

Dia. A Side A 13" x 33 1/2" (33.02cm x 85.09cm) + + =++ Dia. B Side B 13" x 33 1/2" (33.02cm x

www.3wishesfabric.com page 3

Note: Fabric direction.

3. Refer to Diagram C to make two Hanging Tabs from the Color Vibe and Music Words rectangles 2 1/2" x 5 1/2" (6.35cm x 13.97cm). Pin RST on the long sides, sew and press open to make a rectangle 4 1/2" x 5 1/2" (11.43cm x 13.97cm. RST and sew as shown. Press seam open and turn right side out. Center seam on the back and vertical seam is facing up and fold in half along the horizontal seam. Align cut edges and baste together. Make 2. 85.09cm) 1/2" x 5 1/2" (11.43cm x 13.97cm) RST 2" x 2 1/4" (5.08cm x Make5.72cm)2

Placepress.sothe

2. Follow Step 1 and Diagram B to Make Side B 13" x 33 1/2" (33.02cm x 85.09cm).

Dia. D 1 (4.45cm)¾" 1 (4.45cm)¾"Side A Dia. E

www.3wishesfabric.com page 4

4. Place Side A face up and the Hanging Tabs with Color Vibe face down, edges aligned to the top edge approximately 1 ¾" (4.45cm) from each side. Baste in place

6. For a non-reversible Single Wall Hanging, substitute the Piano Keys rectangle 13" x 33 1/2" (33.02cm x 85.09cm) for one of the Wall Hanging Sides.

5. Place Side A right side up and Side B wrong side up edges aligned, centered on top of the batting. Pin together through all layers. Sew leaving a 6" (15.24cm) opening at the bottom. Trim the Batting even with the Wall Hanging and clip the corners to reduce bulk. Turn right side out. Tip: Use a wooden chopstick to push out the corners. Press flat, sew the opening closed by hand. Topstitch close to the edge. Quilt as desired.

(RightSideBattingAsideup)

on the top edge as shown in Diagram D.

6" (15.24cm) Opening Side B (Wrong side up)

Finished Care Instructions

side

Finishing

Machine wash in cold water; gentle cycle. Do not bleach. Tip: Beforedrying,checkforfabricdyesthatmayhaverun. Iffabricdyes run,rewashandrinseusingacolorcatchertoabsorbloosedye. Lay flat to dry or tumble dry low.

Turn static files into dynamic content formats.

Create a flipbook