Drill Jig Bushings by steve hirzel

PRECISION DRILL JIG BUSHINGS

Authorized AuthorizedDistributor: Distributor:

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com PRICES EFFECTIVE JULY 15, 2002 PRINTED IN U.S.A. © COPYRIGHT 2003 CARR LANE MANUFACTURING CO. 11952-703

WHAT MAKES A CARR LANE DRILL BUSHING BETTER?

Carr Lane drill bushings are all precision honed and ground, the finest quality available. They exceed all ANSI drill-bushing standards. Unlike some of our competitors, we manufacture only first-quality drill bushings, never “economy grade.”

TOP QUALITY

Our nationwide network of stocking distributors, plus huge inventories at two warehouse locations, guarantees same-day shipment for standard bushings. In addition, our quick-response manufacturing capabilities allow us to ship almost all special and modified bushings in less than 10 days.

FAST DELIVERY Drill Bushing Factory Austin, Texas

3 ECONOMICAL PRICES

Main Factory and Warehouse St. Louis, Missouri

As you expect with all Carr Lane products, our drill-bushing prices are the most competitive around. Our production volumes and advanced manufacturing techniques mean excellent value for you.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

INDEX Bushing Selection ..............................................................p. 2-3 Installation and Technical Data .........................................p. 4-5 Counterbore Data .................................................................p. 6 Specials .............................................................................p. 7-8

P Press Fit p. 9-14

SF Slip/Fixed Renewable p. 23-28

Extended-Range Bushings .............p. 12, 18, 26, 31, 34, 37 Carbide Bushings..............................................p. 13, 19, 27 Slotted Locator Bushings ..............................................p. 76

Head Press Fit p. 15-20

Serrated Press Fit p. 21-22

FM Flat Milled Renewable p. 29-31

Head Liner p. 36-38

Locking Liner p. 39

Chip Breaker p. 42-43

Directed Coolant p. 44-45

L Liner p. 32-35

Lockscrews and Clamps p. 40-41

Oil Groove p. 46-48

ULD

Diamond Groove p. 49-50

Serrata Groove p. 51

Diamond Knurl Locking Liner p. 52

Gun Drill p. 54-56

Template p. 58-59

EZ Cast p. 53

CB Circuit Board p. 60-61

A Air Feed p. 62-72

Air-Feed Accessories p. 73-75

MANUFACTURING CO. 1BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/94)

BUSHING SELECTION USA P - 20 - 8 Type

OD Length in 64ths in 16ths of an inch of an inch

FLAT MILLED RENEWABLE:

METRIC .1250 ID as 4-place decimal inch

PM - 8 - 12 - 4.50 Type

OD in mm

Length in mm

ID as 2-place decimal mm

PRESS FIT:

Types FM and FMC (carbide). Replaceable bushing used for extra resistance to rotational forces under harsh conditions. This bushing, generally used with a liner, has a milled locking flat to allow fastening securely with a flat clamp. FM bushings also have a standard recess on the other side to allow using a lockscrew instead.

LINER: Types P, PC (carbide), and PM (metric). This is the most-popular and least-expensive drill bushing. P bushings are permanently pressed into the jig plate, usually flush with the top surface. They are generally used for single-step drilling or reaming operations when you do not expect to replace bushings during the tooling’s lifetime. P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.

HEAD PRESS FIT:

Types L and PM (metric). Liners are permanent bushings used to hold renewable drill bushings. The liner’s ID has a precise sliding fit with the renewable bushing’s OD. The hardened liner accurately locates the renewable bushing and protects the jig plate from wear caused by frequent bushing replacement. Note: Metric liner bushings are the same as metric press-fit bushings.

HEAD LINER: Types H, HC (carbide), and HM (metric). Similar to a P bushing, but with a head to resist heavy axial loads. H bushings are permanently pressed into the jig plate. They are generally used for single-step drilling or reaming operations when you do not expect to replace bushings during the tooling’s lifetime. The head can be left exposed, or recessed by counterboring the installation hole. Note: The “length” listed for a USA head-press-fit bushing refers to its length under the head, while the metric version’s “length” is its overall length.

SERRATED PRESS FIT:

Types HL and HM (metric). Similar to an L bushing, but with a head to resist heavy axial loads. Head liners are permanent bushings used to hold renewable drill bushings. The head liner’s ID has a precise sliding fit with the renewable bushing’s OD. The hardened head liner accurately locates the renewable bushing and protects the jig plate from wear caused by frequent bushing replacement. Note: The “length” listed for a head liner refers to its overall length, not its length under the head. Metric head-liner bushings are the same as metric head-press-fit bushings.

UN-A-LOK® LINER: Types SP and SPM (metric). Similar to a P bushing, but with top serrations to prevent rotation in soft materials. Recommended in high-torque situations for materials such as magnesium, aluminum, masonite, or wood. Finish-ground OD ensures accurate ID location. Serrations also resist axial force to prevent pushing the bushing through the jig plate.

SLIP/FIXED RENEWABLE:

Types UL and ULM (metric). Similar to an HL head liner, but incorporating a special locking tab that eliminates the need for a lockscrew. Un-A-Lok® liners are permanent bushings used to hold SF renewable drill bushings (on the “slip” side only, not the “fixed” side). Although slightly more expensive than a head liner plus a lock screw, installation time is dramatically reduced.

CHIP BREAKER: Types SF, SFC/SC/FC (carbide), and SFM (metric). Replaceable bushing generally used with a liner bushing and lockscrew. Use when you expect to replace bushings during the tooling’s lifetime, or when you want to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older Stype slip-renewable and F-type fixed-renewable bushings: One side has a small recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then lock in place by rotating it. S and F types are now obsolete (except in carbide) and combination SF bushings will be furnished at no extra charge.

Types CH and CHM (metric). Similar to an SF renewable bushing, but with specially designed chip-breaking notches on the drill-exit end. Use to break up chips from tough, stringy materials, to reduce friction and heat buildup. Reduces bushing wear at the drill-exit end and reduces the chance of tool or workpiece damage. A chip-breaker bushing should extend beyond its liner to allow chips to escape. Chip breakers are also available on other bushing types such as P, H, and DC.

MANUFACTURING CO. 2BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(12/03)

BUSHING SELECTION DIRECTED COOLANT:

EZ CAST LINER:

Types DC, DCCH (chip breaker), DCL (liner), and DCHL (head liner). Similar to an SF renewable bushing, but with passages to direct coolant to the cutting area. This design is particularly good for washing away chips, especially when ordered as the combination Directed Coolant Chip Breaker (DCCH). DC bushings require special liners, DCL or DCHL, to direct coolant from a drilled manifold passage to the holes in the bushing’s OD wall.

Type EZ. Another liner for cast-in-place or potted installation, used to hold SF renewable drill bushings. Unlike diamond-knurl unilock liners, EZ-cast liners hold either the “slip” or “fixed” side of an SF bushing, since they include an integral lockscrew holder. Diamondknurled OD provides superior holding strength against both rotational and axial forces. Since the bushing’s OD is not ground, keep the ID accurately located during casting or potting to ensure accuracy in the finished tool.

OIL GROOVE:

GUN DRILL: Drill Coolant passage

Oil grooves are available on most drill-bushing types, including P, H, and SF. Use when you need complete drill lubrication and cooling, such as when drilling hardened steel. Oil grooves are specially designed coolant passageways in the bushing’s ID wall. Choose from 25 different groove styles. End wipers are also available, to keep out dirt and chips.

DIAMOND GROOVE:

Workpiece Types GD, GDL (liner), and GDI (insert). Drill bushings for gun-drilling machines, such as Eldorado, Drillmation, DeHoff, and Lahr. Gun drill bushings are similar to SF renewable bushings, but with the drill bearing at the bushing’s head end. Depending on the gun-drilling machine, bushings are either one-piece or two-piece (a liner and an insert).

TEMPLATE:

Types DG and DGM (metric). A bushing for cast-in-place or potted installation. Diamond-knurled OD provides superior holding strength against both rotational and axial forces. Since the bushing’s OD is not ground, keep the ID accurately located during casting or potting to ensure accuracy in the finished tool.

SERRATA GROOVE:

Bushing Retainer Ring

Type TB. An economical bushing designed for thin template jig plates from 1/16- to 3/8-inch thick. Bushings are held in place by a retainer ring. The OD serrations prevent the bushing from spinning. Bushings can be removed and reused by breaking the aluminum retainer ring (extra retainer rings available).

CIRCUIT BOARD: Type SG. Can be cast in place or potted, just as a diamond-groove bushing, or can also be pressed into an installation hole. Straight knurl provides less resistance to axial loads than the diamond knurl on a DG bushing. Since the bushing’s OD is not ground, keep the ID accurately located during casting or potting to ensure accuracy in the finished tool.

DIAMOND-KNURL UN-A-LOK® LINER:

Types CB and CBC (carbide). Headless and head-type bushings made especially for circuit-board drilling machines. Available for Electro-Mechano, Excellon, Waco, Digital, Nationwide, Edlund, Tektronix, Leland-Gifford, Palomar, Hughes, Rapidrill, and Reliable drilling machines.

AIR-FEED DRILL: Types ULD and ULDM (metric). A liner for cast-in-place or potted installation, used to hold SF renewable drill bushings. Un-A-Lok® liners incorporate a special locking tab that eliminates the need for a lockscrew. Holds only the “slip” side of an SF bushing, not the “fixed” side. Diamond-knurled OD provides superior holding strength against both rotational and axial forces. Since the bushing’s OD is not ground, keep the ID accurately located during casting or potting to ensure accuracy in the finished tool.

Collar

Shank Reducer Type A. Drill-bushing shanks, collars, adaptors, and locking accessories for air-feed drills, tappers, and back-spotfacers. Available for all standard drill motors, including Gardner-Denver, Keller, Aro, Buckeye, Quackenbush, Desoutter, and Ingersoll-Rand.

MANUFACTURING CO. 3BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(12/03)

INSTALLATION AND TECHNICAL DATA RECOMMENDED CHIP CLEARANCE:

accurate and round, because these bushings are more-easily distorted. For very-close hole spacing, especially with headed bushings, specify bushings with ground flats.

1/2 to 1-1/2 times drill dia

To minimize drill bending and maximize hole accuracy, mount drill bushings as close to the workpiece as possible while still allowing adequate chip clearance. The necessary clearance depends on workpiece material and chip stringiness. For example, cast iron, with fine chips requires about 1/2 times drill diameter for chip clearance. Materials that produce long, stringy chips, such as cold-rolled steel and aluminum, require at least one-drill-diameter clearance. To reduce clearance even with long, stringy chips, exit-end chip breakers are available…see pages 42-43.

Direct workpiece contact is usually not recommended. Chips can escape only up through the drill’s flutes, drill-bearing length is shortened by the drill point’s length, and drillwithdrawal burrs can raise the jig plate. Direct contact may be necessary, though, for maximum bearing length when drilling sloped surfaces (see below). Also, reamer bushings can be mounted much closer than drill bushings, due to much finer chips, for more-accurate hole finishing.

INSTALLATION-HOLE PREPARATION:

Excessive interference causes bellmouthing

To avoid jig-plate or bushing distortion, do not use excessive interference fits on press-fit bushings. See table below for recommended hole sizes in unhardened steel or cast iron jig plates. Always prepare installation holes using a jig borer or reamer. Standard chucking reamers (with a plus tolerance) usually produce installation holes to the tolerances shown in the table. Other factors to consider are: (1) headed bushings require less interference to resist drilling thrust; (2) longer bushings in thick plates require less interference; (3) bushings with thinner walls are more prone to distortion; (4) less-ductile jig-plate materials require less interference.

METRIC

PRESS-FIT BUSHING OD

SLOPED WORKPIECE SURFACES:

USA PRESS-FIT BUSHING OD

Angled exit end

Whenever the drilling axis is not perpendicular to the workpiece surface, locate the exit end as close to the part as possible. Otherwise the drill will tend to wander. For maximum drill guiding, we recommend specifying bushings with an angle milled on the exit end, tangent to the workpiece surface at point of entry.

SPECIAL BUSHINGS FOR CLOSE HOLE SPACING: When holes are located close together, special bushings are sometimes required. Thinwall bushings, where the bushing ID is larger than the normal ID range for a given OD, are often a good solution. Holes for thinwall bushings must be very

NOM. 5/32 3/16 13/64 1/4 5/16 3/8 13/32 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2-1/4 2-3/4

ACTUAL .1578-.1575 .1891-.1888 .2046-.2043 .2516-.2513 .3141-.3138 .3766-.3763 .4078-.4075 .4392-.4389 .5017-.5014 .5642-.5639 .6267-.6264 .7518-.7515 .8768-.8765 1.0018-1.0015 1.1270-1.1267 1.2520-1.2517 1.3772-1.3768 1.5021-1.5018 1.7523-1.7519 2.2525-2.2521 2.7526-2.7522

RECOMMENDED HOLE SIZE .1565-.1570 .1880-.1883 .2037-.2040 .2507-.2510 .3132-.3135 .3757-.3760 .4069-.4072 .4382-.4385 .5007-.5010 .5632-.5635 .6257-.6260 .7507-.7510 .8757-.8760 1.0007-1.0010 1.1257-1.1260 1.2507-1.2510 1.3757-1.3760 1.5007-1.5010 1.7507-1.7510 2.2507-2.2510 2.7507-2.7510

NOM. 3mm 4mm 5mm 6mm 7mm 8mm 10mm 12mm 15mm 18mm 22mm 26mm 30mm 35mm 42mm 48mm 55mm 62mm 70mm 78mm 85mm 95mm 105mm 115mm 125mm

RECOMMENDED HOLE SIZE (H7)

ACTUAL (s6) 3.020-3.014mm 3.000-3.010mm 4.027-4.019mm 4.000-4.012mm 5.027-5.019mm 5.000-5.012mm 6.027-6.019mm 6.000-6.012mm 7.032-7.023mm 7.000-7.015mm 8.032-8.023mm 8.000-8.015mm 10.032-10.023mm 10.000-10.015mm 12.039-12.028mm 12.000-12.018mm 15.039-15.028mm 15.000-15.018mm 18.039-18.028mm 18.000-18.018mm 22.048-22.035mm 22.000-22.021mm 26.048-26.035mm 26.000-26.021mm 30.048-30.035mm 30.000-30.021mm 35.059-35.043mm 35.000-35.025mm 42.059-42.043mm 42.000-42.025mm 48.059-48.043mm 48.000-48.025mm 55.072-55.053mm 55.000-55.030mm 62.072-62.053mm 62.000-62.030mm 70.078-70.059mm 70.000-70.030mm 78.078-78.059mm 78.000-78.030mm 85.093-85.071mm 85.000-85.035mm 95.093-95.071mm 95.000-95.035mm 105.101-105.079mm 105.000-105.035mm 115.101-115.079mm 115.000-115.035mm 125.117-125.092mm 125.000-125.040mm

MANUFACTURING CO. 4BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/98)

INSTALLATION AND TECHNICAL DATA UNGROUND BUSHINGS AVAILABLE FOR OVERSIZE HOLES: Unground OD

ANSI standards. Counterbores prevent binding and heat buildup due to excessive bearing length. See chart on page 6 for ANSI counterbore depths. Counterbore diameters are generally 1/32 inch larger than the inside diameter, and are angled at the bottom for smooth entrance. No-counterbore bushings are available on request as specials.

DRILL ENTRANCE RADIUS: Radius

We offer bushings with unfinished ODs for custom-fitting to oversize holes. They are slightly larger than nominal diameter to provide grinding stock, .005-.020 extra, depending on the OD size (see charts under each specific bushing type). We recommend grinding on a mandrel to hold ID/OD concentricity.

INSTALLATION PROCEDURE: Arbor Press

Drawbolt Washer Bushing

Bushing

Bushings feature a blended and polished radius at the drillentrance end for smooth drill entry and proper alignment, preventing drill wear and breakage. Radius size varies in proportion to drill size.

CONCENTRICITY: .0003 A

Washer

We recommend installing bushings with an arbor press whenever possible. If the bushing’s OD is large enough, you can also use a drawbolt with two washers as shown above. If a hammer is the only tool available, do not strike the bushing directly or it could fracture. Use a soft-metal punch to cushion the blows. Before installing a press-fit bushing, lubricate the inside of the mounting hole and outside of the bushing with a lubricant such as lithium grease. Otherwise the bushing may score the mounting hole, and may be difficult to replace later.

GROUND LEAD FOR EASY INSTALLATION:

-A-

Bushing OD is ground concentric to the ID to within .0003 TIR for ID sizes from 1/8 inch to 1/2 inch (3mm to 12mm), unless otherwise indicated. For larger or smaller sizes, concentricity is within .0005 TIR. Unground bushings are concentric to within .006 TIR. On counterbored bushings, concentricity applies only over the drill-bearing length.

OTHER TOLERANCES: Head diameter

Ground lead

45° Chamfer

All bushings feature a concentric ground lead and a 45° chamfer on the exit end to ensure perfect alignment during installation.

COUNTERBORES ON LONG BUSHINGS:

Length

Head thickness

Any dimensions where tolerances are not specifically listed are held to +/- .010 inches on standard ANSI sizes, and +/.015 inches on larger sizes (extended range). Special tolerances for any dimension are available on request as specials.

MATERIAL:

Long bushings with small IDs are slightly counterbored for proper drill-bearing length and chip clearance, as specified by

Standard drill-bushing material is durable 1144 Stressproof steel, heat treated to achieve RC 62-64 ID hardness, and other high-carbon steels. Optional materials such as tungsten carbide (Grade C2 carbide with steel head), 52100 steel, A2 tool steel, D2 tool steel, M2 tool steel, 416 stainless, 440C stainless, 17-4PH stainless, 303 stainless, 660 bronze, Ampco 18 bronze, Ampco 21 bronze, Oilite, and brass are available as specials. See pages 13, 19, and 27 for carbide bushings.

MANUFACTURING CO. 5BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(5/05)

COUNTERBORE DATA TYPE P — DRILL BEARING LENGTH DRILL SIZE (ID)

.0135 - .0291 .0292 - .0519 .0520 - .0625 .0135 - .0291 .0292 - .0519 .0520 - .0634 .0635 - .0995 .0135 - .0291 .0292 - .0519 .0520 - .0634 .0635 - .0995 .0980 - .1406 .1250 - .1935 .1935 - .2880 .1875 - .2570 .2340 - .2900 .1875 - .3160 .3125 - .4375 .3125 - .5313

BUSHING LENGTH OD

1/4

5/16

3/8

1/2

3/4

1-3/8

1-1/2

1-3/4

2-1/8

2-1/2

5/32

FULL

5/16

3/16

FULL

FULL FULL

7/16

5/16

FULL FULL FULL FULL FULL FULL FULL FULL FULL

7/16 7/16

7/16 5/8 5/8 5/8 5/8 5/8 5/8

7/16 5/8 5/8 5/8 5/8 5/8 3/4

FULL FULL

7/16 5/8 5/8 5/8 5/8 5/8 3/4 1-1/2 1-1/2

13/64

FULL

1/4 5/16 3/8 13/32 7/16 1/2 5/8 3/4

FULL FULL FULL FULL FULL FULL FULL FULL

FULL FULL FULL FULL FULL FULL FULL

TYPE H — DRILL BEARING LENGTH RANGE (ID)

.0135 - .0291 .0292 - .0519 .0520 - .0625 .0135 - .0291 .0292 - .0519 .0520 - .0634 .0635 - .0995 .0980 - .1406 .1250 - .1935 .1935 - .2280 .1875 - .2570 .2340 - .2900 .1875 - .3160 .3125 - .4375 .3125 - .5313

BUSHING LENGTH (UNDER HEAD) OD 5/32

1/4 FULL

5/16

1/2

3/4

1-3/8

1-1/2

1-3/4

2-1/8

2-1/2

5/16

7/16 7/16

FULL FULL FULL FULL FULL FULL FULL

7/16 5/8 5/8 5/8 5/8 5/8 3/4

FULL FULL

7/16 5/8 5/8 5/8 5/8 5/8 3/4 1-1/2 1-1/2

3/8 5/16

FULL

FULL 5/16 13/64

FULL

FULL FULL

1/4 5/16 3/8 13/32 7/16 1/2 5/8 3/4

FULL FULL FULL FULL FULL FULL FULL FULL

TYPES SF & FM — DRILL BEARING LENGTH DRILL SIZE (ID)

.0135 - .0291 .0292 - .0519 .0520 - .0634 .0635 - .0980 .0995 - .1405 .0135 - .0291 .0292 - .0519 .0520 - .0634 .0635 - .0934 .0935 - .1249 .1250 - .1935 .1935 - .2280 .2340 - .2900 .1405 - .1889 .1890 - .3438 .2950 - .5625

BUSHING LENGTH (UNDER HEAD) OD

1/4

5/16

3/8

1/2

5/8

3/4

1-3/8

1-1/2

1-3/4

2-1/8

2-1/2

5/16

FULL

3/8 3/8

7/16 7/16

5/16

7/16

FULL FULL FULL

5/8

5/8 5/8 5/8 5/8

FULL FULL

7/8 FULL

5/8 5/8 5/8 5/8 1

FULL

5/8 5/8 5/8 5/8 1 1-1/2

1/4

3/16 1/4

5/16

FULL FULL 1/4

5/16

3/8 7/16

FULL FULL

3/8 FULL FULL FULL FULL

1/2

FULL

3/4

FULL

FULL FULL

MANUFACTURING CO. 6BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(3/01)

SPECIALS Check for adequate wall thickness by calculating the ratio of ID divided by OD:

1. SPECIAL ID SIZE (WITHIN LISTED ID RANGE): With standard OD, standard length, and standard tolerances.

Up to 1/4" OD Over 1/4" to 1/2" OD Over 1/2" OD

ID/OD must be ≤ .70 ID/OD must be ≤ .75 ID/OD must be ≤ .80

Please contact factory for pricing.

Special ID sizes include any ID size that is not a standard fractional, number, letter, or metric drill size as listed on the back cover of our catalog (reamer and tap-guide ID sizes are specials). To price, add a prorated $35.00 setup charge to the quantity price for the standard OD and length.

4. SPECIAL OD SIZE: With standard ID and length for the next-larger OD, and standard tolerances.

Example: (6) H-10-8-.0365 List price for H-10-8

$25.98

Quantity price for H-10-8 ($25.98 less 18%) $35.00 setup divided by 6

$21.30 + 5.83 $27.13

2. ID SIZE SMALLER THAN LISTED RANGE: With standard or special ID, standard OD, standard length, and standard tolerances.

To price, compare price for the standard OD and length with the price for the largest bushing of the same length with the ID within range. Add a prorated $35.00 setup charge to the higher of the two. Example: (6) H-16-8-.0820 List price for H-16-8 (low) List price for H-13-8 (high)

$11.25 $12.39

Quantity price for H-13-8 ($12.39 less 18%) $35.00 setup divided by 6

$10.16 + 5.83 $15.99

3. ID SIZE LARGER THAN LISTED RANGE (THIN-WALL BUSHINGS): With standard or special ID, standard OD, standard length, and standard tolerances.

To price, add a prorated $35.00 setup charge to the quantity price for the same-length bushing with the next-larger standard OD. Head dimensions for the next-larger size will be used unless otherwise requested. Example: (6) H-18-8-.1250 List price for H-20-8

$ 9.19

Quantity price for H-20-8 ($9.19 less 18%) $35.00 setup divided by 6

$ 7.54 +5.83 $13.37

5. SPECIAL LENGTH With standard ID, standard OD, standard tolerances, and length shorter than maximum listed length.

To price, add a prorated $35.00 setup charge to the quantity price for the next-longer standard length. Example: (6) H-16-14-.1250 List price for H-16-16

$ 18.70

Quantity price for H-16-16 ($18.70 less 18%) $35.00 setup divided by 6

$ 15.33 + 5.83 $ 21.16

MANUFACTURING CO. 7BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/03)

SPECIALS 6. EXTRA LENGTH: With standard ID, standard OD, and standard tolerances.

To price, add the following percentages to the standard bushing’s price (add a separate percentage charge for each special tolerance). Also add a prorated $35.00 setup charge. .0002 ID tolerance range (up to 1" ID) .0001 ID tolerance range (up to 1" ID) .0001 OD tolerance range (up to 1" OD) .0002 TIR concentricity (over 1/8" to 1" ID)

+25% +75% +25% +25%

Example: (6) H-16-10-.1250 ID+0/+.0001 CONC .0002 To price, add 15% for up to 1/4" extra length, to the quantity price for the longest length listed in the catalog, plus a prorated $35.00 setup charge. Example: (6) H-16-26-.1250 List price for H-16-24

List price for H-16-10

$12.39

Quantity price for H-16-10 ($12.39 less 18%) Add-on for .0001 ID tolerance (+ 75%) Add-on for .0002 concentricity (+ 25%) $35.00 setup divided by 6

$10.16 + 7.62 + 2.54 + 5.83 $26.15

$27.00

Quantity price for H-16-24 ($27.00 less 18%)

$22.13

Quantity price for H-16-24 plus 15% $35.00 setup divided by 6

$25.45 + 5.83 $31.28

9. NO COUNTERBORE ON LONG BUSHINGS:

7. COMBINATION SPECIAL ID, OD, AND/OR LENGTH: With standard tolerances. Contact factory for special pricing on “No Counterbore” bushings, long bushings that would normally be counterbored, according to ANSI standards.

10. OTHER ALTERATIONS: To price, compare price for the ID range, special OD, and/or special length. Add a prorated $35.00 setup charge to the highest of all the prices. Example: (6) H-22-14-.1260 List price for H-24-16, ID range (low) List price for H-20-16, ID range (high) List price for H-24-16, OD range (low) List price for H-24-16, Length (low)

$10.72 $11.36 $10.72 $10.72

Quantity price for H-20-16 ($11.36 less 18%) $35.00 setup divided by 6

$ 9.31 + 5.83 $15.14

8. SPECIAL TOLERANCES: With standard ID, standard OD, and standard length.

For milled angles, ground flats, cross holes, chip breakers, oil grooves, or special finishing, please contact factory.

11. SPECIAL MATERIAL: Bushings made of the following heat-treated materials are readily available as specials: 52100 Steel A2 Tool Steel D2 Tool Steel M2 Tool Steel

416 Stainless Steel 440C Stainless Steel 17-4PH Stainless Steel

Bushings made of the following non-heat-treated materials are also readily available as specials: 303 Stainless Steel 660 Bronze Ampco 18 Bronze

Ampco 21 Bronze Oilite Brass

Please contact factory for pricing.

MANUFACTURING CO. 8BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/03)

PRESS FIT ID RANGE

LENGTH

APPLICATIONS: This is the most-popular and least-expensive drill bushing. P bushings are permanently pressed into the jig plate, usually flush with the top surface. They are generally used for single-step drilling or reaming operations when you do not expect to replace bushings during the toolingâ&#x20AC;&#x2122;s lifetime. P bushings can be mounted closer together than headed bushings, but offer less resistance to heavy axial loads.

ORDERING EXAMPLES: P-20-16-.1250 P-20-16-.1772

Standard USA bushing, inch ID Standard USA bushing, mm ID (.1772 = 4.50mm) P-20-16U-.1250 Unground OD P-20-16-.1250 REAMER Reamer tolerance on ID P-20-16-.1250 NCB No counterbore on long bushings marked with * (no counterbore is standard on all other bushings) PC-20-16-.1250 Carbide bushing PM-8-12-4.50 Standard metric bushing

Prices shown here apply to standard bushings only, either ground or unground OD, for a standard drill size within the stated ID range. See back cover for decimal equivalents. To price non-standard sizes, including all reamer and tap-guide bushings, see page 7.

STANDARD ID TOLERANCES: From #80 to 1/4"

+ .0001/+.0004

Over 1/4 to 3/4"

+ .0001/+.0005

Over 3/4 to 1-1/2"

+ .0002/+.0006

Over 1-1/2 to 2-3/4" + .0003/+.0007

From .35 to 3mm +.002/+.008mm Over 3 to 6mm +.004/+.012mm Over 6 to 10mm +.005/+.014mm Over 10 to 18mm +.006/+.017mm Over 18 to 30mm +.007/+.020mm Over 30 to 50mm +.009/+.025mm Over 50 to 80mm +.010/+.029mm Over 80 to 120mm +.012/+.034mm (G6 tolerance)

ANSI PRICE LENGTH PART NO. 1-5

26.18 1/4 P-10-4 27.38 5/16 P-10-5 28.09 3/8 P-10-6 28.60 *1/2 P-10-8 23.29 1/4 P-10-4 .0292-.0519 5/32 24.32 5/16 P-10-5 24.65 3/8 P-10-6 #69-3/64 .1578-.1575 25.73 *1/2 P-10-8 .75-1.25mm (.166-.161 UNG) 27.38 *3/4 P-10-12 18.45 1/4 P-10-4 .0520-.0625 19.28 5/16 P-10-5 #55-1/16 19.65 3/8 P-10-6 19.97 *1/2 P-10-8 1.30-1.60mm 21.76 *3/4 P-10-12 18.45 1/4 P-12-4 19.28 5/16 P-12-5 .0520-.0634 19.65 3/8 P-12-6 #55-1/16 19.97 *1/2 P-12-8 1.30-1.60mm *5/8 P-12-10 20.81 3/16 *3/4 P-12-12 21.76 .1891-.1888 8.68 1/4 P-12-4 (.201-.197 UNG) 9.70 5/16 P-12-5 .0635-.0995 10.21 3/8 P-12-6 #52-#39 10.72 1/2 P-12-8 1.65-2.50mm 5/8 P-12-10 11.25 *3/4 P-12-12 11.74 26.18 1/4 P-13-4 .0135-.0291 27.38 5/16 P-13-5 #80-#70 28.09 3/8 P-13-6 .35-.70mm 28.60 *1/2 P-13-8 23.29 1/4 P-13-4 .0292-.0519 24.32 5/16 P-13-5 24.65 3/8 P-13-6 #69-3/64 25.73 *1/2 P-13-8 .75-1.30mm *3/4 P-13-12 27.38 18.45 1/4 P-13-4 13/64 19.28 5/16 P-13-5 .0520-.0634 .2046-.2043 19.65 3/8 P-13-6 #55-1/16 19.97 *1/2 P-13-8 (.213-.208 UNG) 1.35mm-1.60mm *3/4 P-13-12 21.76 *1 P-13-16 24.56 8.68 1/4 P-13-4 9.70 5/16 P-13-5 .0635-.0995 10.34 3/8 P-13-6 10.72 1/2 P-13-8 #52-#39 *3/4 P-13-12 11.74 1.65-2.50mm *1 P-13-16 12.77 *1-3/8 P-13-22 16.14 * Counterbored, leaving correct drill-bearing length and clearance (see page 6 for bearing length).

.0135-.0291 #80-#70 .35-.70mm

REAMER ID TOLERANCES: From #60 to 1/4"

+.0005/+.0008

Over 1/4 to 1"

+.0006/+.0010

Over 1" to 1-1/2"

+.0008/+.0012

From 1 to 3mm +.006/+.012mm Over 3 to 6mm +.010/+.018mm Over 6 to 10mm +.013/+.022mm Over 10 to 18mm +.016/+.027mm Over 18 to 30mm +.020/+.033mm (F6 tolerance)

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 9BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

P ID RANGE

.0980-.1406 #40-9/64 2.50-3.50mm

PRESS FIT OD

1/4 .2516-.2513 (.265-.260 UNG)

.1250-.1935 1/8-#10 3.20-4.90mm

5/16 .3141-.3138 (.327-.322 UNG)

.1935-.2280 #10-#1 4.90-5.80mm

3/8 .3766-.3763 (.390-.385 UNG)

.1875-.2570 3/16-F 4.75-6.50mm

13/32 .4078-.4075 (.421-.416 UNG)

.2340-.2900 A-L 5.90-7.40mm

7/16 .4392-.4389 (.453-.448 UNG)

.1875-.3160 3/16-O 4.75-8.00mm

1/2 .5017-.5014 (.520-.515 UNG)

LENGTH

ANSI PART NO.

PRICE 1-5

1/4 5/16 3/8 1/2 5/8 *3/4 *1 *1-3/8 *1-1/2 *1-3/4 1/4 5/16 3/8 1/2 5/8 3/4 *1 *1-3/8 *1-1/2 *1-3/4 1/4 5/16 3/8 1/2 5/8 3/4 *1 1/4 5/16 3/8 1/2 3/4 *1 *1-3/8 *1-1/2 *1-3/4 1/4 5/16 3/8 1/2 5/8 3/4 *1 1/4 5/16 3/8 1/2 3/4 *1 *1-3/8 *1-1/2 *1-3/4 *2-1/8

P-16-4 P-16-5 P-16-6 P-16-8 P-16-10 P-16-12 P-16-16 P-16-22 P-16-24 P-16-28 P-20-4 P-20-5 P-20-6 P-20-8 P-20-10 P-20-12 P-20-16 P-20-22 P-20-24 P-20-28 P-24-4 P-24-5 P-24-6 P-24-8 P-24-10 P-24-12 P-24-16 P-26-4 P-26-5 P-26-6 P-26-8 P-26-12 P-26-16 P-26-22 P-26-24 P-26-28 P-28-4 P-28-5 P-28-6 P-28-8 P-28-10 P-28-12 P-28-16 P-32-4 P-32-5 P-32-6 P-32-8 P-32-12 P-32-16 P-32-22 P-32-24 P-32-28 P-32-34

7.98 8.49 9.19 9.70 10.34 10.87 12.05 19.03 19.92 20.95 6.63 6.95 7.29 7.66 7.98 8.30 8.69 12.77 14.81 16.85 5.75 5.93 6.45 6.63 6.95 7.29 8.49 5.75 5.93 6.45 6.63 7.29 8.49 9.70 10.87 12.05 5.75 5.93 6.45 6.63 6.95 7.29 8.49 5.75 5.93 6.45 6.63 7.29 8.49 9.70 10.87 12.05 24.27

ID RANGE

.2950-.3438 9/16 M-11/32 .5642-.5639 7.50-8.75mm (.582-.577 UNG)

5/8 .3125-.4375 .6267-.6264 5/16-7/16 7.90-11.00mm (.645-.640 UNG)

3/4 .3125-.5312 .7518-.7515 5/16-17/32 7.90-13.50mm (.770-.765 UNG)

.5000-.6562 7/8 1/2-21/32 .8768-.8765 12.50-16.50mm (.895-.890 UNG)

LENGTH

ANSI PART NO.

PRICE 1-5

1/4 5/16 3/8 1/2 5/8 3/4 1 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-3/8 1-1/2 1-3/4 2-1/8 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-3/8 1-1/2 1-3/4 2-1/8 *2-1/2 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2

P-36-4 P-36-5 P-36-6 P-36-8 P-36-10 P-36-12 P-36-16 P-40-4 P-40-5 P-40-6 P-40-8 P-40-10 P-40-12 P-40-16 P-40-20 P-40-22 P-40-24 P-40-28 P-40-34 P-48-4 P-48-5 P-48-6 P-48-8 P-48-10 P-48-12 P-48-16 P-48-20 P-48-22 P-48-24 P-48-28 P-48-34 P-48-40 P-56-5 P-56-6 P-56-8 P-56-10 P-56-12 P-56-16 P-56-20 P-56-22 P-56-24 P-56-28 P-56-34 P-56-40

6.63 5.75 6.13 6.13 6.45 6.63 6.95 6.63 5.75 6.13 6.13 6.45 6.63 6.95 9.51 9.51 10.02 10.87 13.08 6.95 5.93 6.63 6.63 6.95 6.95 7.66 9.70 9.70 10.34 11.25 13.28 24.27 8.69 9.00 7.98 8.30 8.30 8.69 9.51 9.51 10.34 11.36 13.08 15.13

QUANTITY DISCOUNTS Quantity * Counterbored, leaving correct drill-bearing length and clearance (see page 6 for bearing length).

Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 10BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/02)

PRESS FIT ID RANGE

LENGTH

ANSI PART NO.

PRICE 1-5

1/2 5/8 3/4 1 1-1/4 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 1/2 5/8 3/4 1 1-1/4 1-1/2 1-3/4 5/8 3/4 1 1-1/4 1-1/2 1-3/4 2 1/2 5/8 3/4 1 1-1/4 1-3/8 1-1/2 1-3/4 2 2-1/8 2-1/2 3 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4

P-64-8 P-64-10 P-64-12 P-64-16 P-64-20 P-64-22 P-64-24 P-64-28 P-64-34 P-64-40 P-64-48 P-72-8 P-72-10 P-72-12 P-72-16 P-72-20 P-72-24 P-72-28 P-80-10 P-80-12 P-80-16 P-80-20 P-80-24 P-80-28 P-80-32 P-88-8 P-88-10 P-88-12 P-88-16 P-88-20 P-88-22 P-88-24 P-88-28 P-88-32 P-88-34 P-88-40 P-88-48 P-96-12 P-96-16 P-96-20 P-96-24 P-96-28 P-96-32 P-96-36

8.30 8.30 8.30 8.82 9.51 9.51 10.72 11.74 13.08 15.13 25.35 12.77 12.05 10.87 12.77 14.23 15.45 16.85 12.05 10.87 12.77 14.23 15.45 16.85 19.34 13.08 12.39 10.87 13.08 14.44 14.44 15.83 17.17 19.72 19.92 22.27 30.77 16.35 14.44 16.35 17.51 18.52 21.58 22.98

1 .5000-.7656 1.0018-1.0015 1/2-49/64 12.50-19.50mm (1.020-1.015 UNG)

.7656-.8438 1-1/8 49/64-27/32 1.1270-1.1267 19.50-21.50mm (1.145-1.140 UNG)

.8594-.9375 1-1/4 55/64-15/16 1.2520-1.2517 22.00-24.00mm (1.270-1.265 UNG)

.6250-1.0312 1-3/8 5/8-1-1/32 1.3772-1.3768 16.00-26.00mm (1.395-1.390 UNG)

1.0156-1.1250 1-1/2 1-1/64-1-1/8 1.5021-1.5018 26.00-29.00mm (1.520-1.515 UNG)

ID RANGE

1.0000-1.3906 1-3/4 1-1-25/64 1.7523-1.7519 25.00-35.00mm (1.770-1.765 UNG)

2-1/4 1.3750-1.7656 1-3/8-1-49/64 2.2525-2.2521 35.00-45.00mm (2.270-2.265 UNG)

LENGTH

ANSI PART NO.

PRICE 1-5

3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3

P-112-12 P-112-16 P-112-22 P-112-24 P-112-28 P-112-34 P-112-40 P-112-48 P-144-16 P-144-22 P-144-24 P-144-28 P-144-34 P-144-40 P-144-48

16.35 14.44 16.35 17.51 18.52 21.58 22.98 35.48 18.70 20.74 21.77 22.78 26.37 28.91 41.30

Have a problem? Carr Lane can help you pin it down, with L Pins, T Pins, Locking Pins, Clamping Pins, Ball-Lock Pins, Lifting Pins,

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

and More.

MANUFACTURING CO. 11BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

PRESS FIT EXTENDED RANGE (LARGE)

P ID

RANGE

1.5000 1.5000 1.5000 1.7500 2.2500 2.2500 2.5000 2.5000 2.7500 3.0000 3.0000 3.3750 3.3750 3.6250 to to to to to to to to to to to to to to 4.1250 2.7500 3.0000 3.1250 3.3750 3.6250 3.7500 3.8750 4.2500 2.8750 2.3750 2.5000 2.0000 2.1250 2-3/8

2-1/2

2-3/4

3-1/4 3-3/8

3-1/2

3-3/4

4-1/4

4-3/8

4-1/2

4-3/4

2.3775 2.5025 2.7525 3.0028 3.2528 3.3778 3.5028 3.7528 4.0028 4.2530 4.3780 4.5030 4.7530 5.0030 2.3771 2.5021 2.7521 3.0023 3.2523 3.3773 3.5023 3.7523 4.0023 4.2525 4.3775 4.5025 4.7525 5.0025 256

272

280

288

304

320

65.05 66.21

68.08

69.42

71.73

74.70

78.29

82.84

33.77 40.81 49.01 63.41 64.61

65.35 67.60

69.62

71.61

73.62

76.10

80.67

85.95

33.89

34.25 42.76 51.20 64.14 65.36

66.81 68.88

72.15

73.92

76.71

79.81

83.21

88.38

36.44

37.36 45.37 52.48 65.35 66.60

68.88 72.82

74.53

76.53

78.85

82.11

85.45

91.96

1-3/4

38.09

38.93 46.59 54.24 67.06 68.32

69.97 75.56

76.90

79.38

81.45

84.49

87.76

95.23

40.02

41.18 48.48 55.76 68.46 69.75

74.53 78.54

79.44

82.66

83.76

86.54

90.37

98.76

2-1/8

41.30

42.22 49.57

2-1/4

43.19

44.41 51.75 59.17 72.28 73.67

78.29 81.57

82.66

85.45

86.54

90.37

93.30 102.22

2-1/2

45.37

47.98 54.12 61.59 74.34 75.75

81.21 82.91

85.44

88.25

90.37

93.30

96.57 105.68

2-3/4

50.23

51.56 60.44 69.24 76.71 78.17

84.49 87.76

88.38

91.41

93.67

97.07 100.34 109.45

58.61

59.40 65.60 71.72 78.85 80.34

88.31 90.26

92.02

94.68

97.30 100.40 103.68 112.78

3-1/4

60.44

61.41 70.16 73.99 81.21 82.75

92.37 94.68

95.47

98.22 101.44 104.52 107.68 116.61

3-1/2

62.25

63.05 71.72 76.53 83.28 84.86

96.21 97.85

99.12 101.85 105.32 108.78 111.69 121.36

3-3/4

63.60

66.75 73.24 77.67 85.28 86.89 100.34 102.22 102.76 106.06 110.06 112.98 116.26 126.41

64.86

65.97 74.76 78.90 87.64 89.32 104.17 106.36 106.78 110.43 114.36 117.87 121.18 131.57

4-1/4

67.06

68.09 76.90 82.54 89.83 91.55 107.14 110.43 111.69 115.34 119.35 122.74 126.64 137.88

4-1/2

69.00

70.28 78.90 85.28 92.21 93.84 110.97 114.91 116.54 120.02 124.09 128.03 131.92 143.22

4-3/4

71.18

72.47 81.27 87.76 94.58 96.37 114.56 118.80 121.36 124.83 129.19 133.20 137.74 148.87

73.38

75.20 83.82 91.41 98.22 100.08 117.52 123.12 126.39 129.91 134.29 138.61 143.22 154.52

5-1/2

104.17 123.54 131.50 136.48 139.94 144.68 149.42 153.91 165.26

139.94 145.77 150.09 155.25 159.98 165.26 176.19

6-1/2

104

155.42 159.98 165.26 170.55 175.65 187.62

112

172.55 182.93 190.05 199.83

160

216

ANSI NO.

152

3/4

30.18

30.91 39.50 48.10 61.41 62.58

31.77

1-1/4

1-1/2

176

192

208

LENGTH

224

240

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -3 Net 1.00

4 -6 8% .92

7 -12 18% .82

13 -24 25% .75

25 -49 30% .70

50 Up 33% .67

MANUFACTURING CO. 12BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

PRESS FIT CARBIDE ID RANGE

.0280-.0468 #70-#56 .75-1.15mm .0469-.0625 3/64-1/16 1.20-1.55mm .0550-.0995 #54-#39 1.40-2.50mm .0995-.1360 #39-#29 2.55-3.40mm .1285-.1875 #30-3/16 3.30-4.75mm

.1875-.2500 3/16-1/4 4.80-6.30mm

.2188-.3125 7/32-5/16 5.60-7.90mm

.3125-.4219 5/16-27/64 8.00-10.50mm

.3750-.5000 3/8-1/2 9.60-12.50mm

.5000-.6250 1/2-5/8 13.00-15.50mm

LENGTH

ANSI PART NO.

5/16

PC-10-5

1/2

PC-10-8

5/16

PC-10-5

1/2

PC-10-8

13/64 .2046-.2043

5/16

PC-13-5

1/2

PC-13-8

1/4 .2516-.2513

5/16

PC-16-5

5/32 .1578-.1575

5/16 .3141-.3138

13/32 .4078-.4075

1/2 .5017-.5014

5/8 .6267-.6264

3/4 .7518-.7515

7/8 .8768-.8765

1/2

PC-16-8

5/16

PC-20-5

1/2

PC-20-8

3/4

PC-20-12

PC-20-16

5/16

PC-26-5

PRICE 1-5

Contact Factory Contact Factory

ID RANGE

PC OD

.5000-.7500 1 1/2-3/4 1.0018-1.0015 13.00-19.00mm

Contact Factory Contact Factory

.7500-1.0000 1-3/8 3/4-1 1.3772-1.3768 19.50-25.00mm

Contact Factory

1.0000-1.3750 1-3/4 1–1-3/8 1.7523-1.7519 26.00-34.00mm

LENGTH

ANSI PART NO.

1/2

PC-64-8

3/4

PC-64-12

PC-64-16

1-3/8

PC-64-22

1-3/4

PC-64-28

3/4

PC-88-12

PC-88-16

1-3/8

PC-88-22

1-3/4

PC-88-28

2-1/8

PC-88-34

2-1/2

PC-88-40

PC-112-16

1-3/8

PC-112-22

1-3/4

PC-112-28

2-1/8

PC-112-34

PRICE 1-5

Contact Factory

1/2

PC-26-8

3/4

PC-26-12

PC-26-16

2-1/2

PC-112-40

5/16

PC-32-5

PC-112-48

1/2

PC-32-8

PC-144-16

1-3/8

PC-144-22

1-3/4 2-1/8

PC-144-28 Contact PC-144-34 Factory

2-1/2

PC-144-40

PC-144-48

3/4

PC-32-12

PC-32-16

1-3/8

PC-32-22

1/2

PC-40-8

3/4

PC-40-12

PC-40-16

1-3/8

PC-40-22

1/2

PC-48-8

3/4

PC-48-12

PC-48-16

1-3/8

PC-48-22

1/2

PC-56-8

3/4

PC-56-12

PC-56-16

1-3/8

PC-56-22

1-3/4

PC-56-28

Contact Factory

1.3750-1.7500 2-1/4 1-3/8-1-3/4 2.2525-2.2521 35.00-44.00mm

Contact Factory

Check out Carr Lane’s CAD/CAM library of tooling components, the Tool Designer’s Assistant®, available in 2-D or 3-D, micro-based workstation or mainframe. See our ad in the front of this book.

MANUFACTURING CO. 13BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(5/99)

PRESS FIT METRIC

PM OD (s6)

ID RANGE (G6)

.35-1.00mm 1.01-1.80mm

4mm 4.027-4.019mm

1.81-2.60mm

5mm 5.027-5.019mm

2.61-3.30mm

6mm 6.027-6.019mm

3.31-4.00mm

7mm 7.032-7.023mm

4.01-5.00mm

8mm 8.032-8.023mm

5.01-6.00mm

10mm 10.032-10.023mm

6.01-8.00mm

12mm 12.039-12.028mm

15mm 8.01-10.00mm 15.039-15.028mm 18mm 10.01-12.00mm 18.039-18.028mm 22mm 12.01-15.00mm 22.048-22.035mm 26mm 15.01-18.00mm 26.048-26.035mm 30mm 18.01-22.00mm 30.048-30.035mm 35mm 22.01-26.00mm 35.059-35.043mm 42mm 26.01-30.00mm 42.059-42.043mm 48mm 30.01-35.00mm 48.059-48.043mm 55mm 35.01-42.00mm 55.072-55.053mm 62mm 42.01-48.00mm 62.072-62.053mm

LENGTH

ANSI PART NO.

PRICE 1-5

*6mm *9mm 6mm 9mm 6mm 9mm 8mm 12mm 16mm 8mm 12mm 16mm 8mm 12mm 16mm 10mm 16mm 20mm 10mm 16mm 20mm 12mm 20mm 25mm 12mm 20mm 25mm 16mm 28mm 36mm 16mm 28mm 36mm 20mm 36mm 45mm 20mm 36mm 45mm 25mm 45mm 56mm 25mm 45mm 56mm 30mm 56mm 67mm 30mm 56mm 67mm

PM-4-6 PM-4-9 PM-4-6 PM-4-9 PM-5-6 PM-5-9 PM-6-8 PM-6-12 PM-6-16 PM-7-8 PM-7-12 PM-7-16 PM-8-8 PM-8-12 PM-8-16 PM-10-10 PM-10-16 PM-10-20 PM-12-10 PM-12-16 PM-12-20 PM-15-12 PM-15-20 PM-15-25 PM-18-12 PM-18-20 PM-18-25 PM-22-16 PM-22-28 PM-22-36 PM-26-16 PM-26-28 PM-26-36 PM-30-20 PM-30-36 PM-30-45 PM-35-20 PM-35-36 PM-35-45 PM-42-25 PM-42-45 PM-42-56 PM-48-25 PM-48-45 PM-48-56 PM-55-30 PM-55-56 PM-55-67 PM-62-30 PM-62-56 PM-62-67

30.51 32.73 27.14 28.73 10.12 11.91 9.89 11.31 12.66 8.10 8.92 9.68 8.10 8.92 9.68 7.52 7.73 8.50 7.52 7.73 8.50 7.15 7.73 8.10 7.73 8.10 8.92 9.68 10.12 12.05 9.68 10.27 12.49 9.68 12.49 13.68 12.66 18.45 20.00 16.82 21.58 26.77 16.82 21.58 26.77 24.16 33.68 48.12 38.06 49.39 57.29

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

LENGTH

ANSI PART NO.

PRICE 1-5

30mm 56mm 67mm 35mm 78mm 55.01-63.00mm 78.078-78.059mm 67mm 78mm 35mm 85mm 63.01-70.00mm 85.093-85.071mm 67mm 78mm 40mm 95mm 70.01-78.00mm 95.093-95.071mm 78mm 105mm 40mm 105mm 78.01-85.00mm 105.101-105.079mm 78mm 105mm 45mm 115mm 85.01-95.00mm 115.101-115.079mm 89mm 112mm 45mm 125mm 95.01-105.00mm 125.117-125.092mm 89mm 112mm

PM-70-30 PM-70-56 PM-70-67 PM-78-35 PM-78-67 PM-78-78 PM-85-35 PM-85-67 PM-85-78 PM-95-40 PM-95-78 PM-95-105 PM-105-40 PM-105-78 PM-105-105 PM-115-45 PM-115-89 PM-115-112 PM-125-45 PM-125-89 PM-125-112

47.51 57.49 67.16 58.30 76.93 79.70 74.01 86.86 89.27 80.92 100.29 122.69 85.04 105.21 128.16 93.87 120.87 142.26 105.81 134.85 159.14

ID RANGE (G6)

48.01-55.00mm

OD (s6)

70mm 70.078-70.059mm

* Small metric drill sizes through .80mm are counterbored 1.00mm diameter, with 3mm drill-bearing length.

A manâ&#x20AC;&#x2122;s real limitations are not the things he wants to do and cannot; they are the things he ought to do but does not.

500 Up 52% .48

MANUFACTURING CO. 14BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

HEAD PRESS FIT

H-20-16U-.1250 Unground OD H-20-16-.1250 REAMER Reamer tolerance on ID H-20-16-.1250 NCB No counterbore on long bushings marked with * (no counterbore is standard on all other bushings) HC-20-16-.1250 Carbide bushing HM-8-12-4.50 Standard metric bushing

USA BODY OD 5/32 13/64 1/4 5/16 3/8 13/32 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/4 1-3/8 1-3/4 2-1/4

METRIC

F DIA

1/4 19/64 23/64 27/64 1/2 1/2 9/16 39/64 11/16 51/64 59/64 1-7/64 1-15/64 1-1/2 1-39/64 1-63/64 2-31/6

3/32 3/32 3/32 1/8 3/32 5/32 3/32 7/32 3/32 7/32 7/32 1/4 5/16 1/4 3/8 3/8 3/8

For dimensions of larger USA sizes, see page 18 (Extended Range).

BODY OD 4mm 5mm 6mm 7mm 8mm 10mm 12mm 15mm 18mm 22mm 26mm 30mm 35mm 42mm 48mm 55mm 62mm 70mm 78mm 85mm 95mm 105mm 115mm 125mm

F DIA

7mm 8mm 9mm 10mm 11mm 13mm 15mm 18mm 22mm 26mm 30mm 34mm 39mm 46mm 52mm 59mm 66mm 74mm 82mm 90mm 100mm 110mm 120mm 130mm

2mm 2mm 2.5mm 2.5mm 2.5mm 3mm 3mm 3mm 4mm 4mm 4mm 5mm 5mm 5mm 5mm 5mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm

APPLICATIONS: Similar to a P bushing, but with a head to resist heavy axial loads. H bushings are permanently pressed into the jig plate. They are generally used for single-step drilling or reaming operations when you do not expect to replace bushings during the tooling’s lifetime. The head can be left exposed, or recessed by counterboring the installation hole. Note: The “length” listed for a USA head-press-fit bushing refers to its length under the head, while the metric version’s “length” is its overall length.

STANDARD ID TOLERANCES: From #80 to 1/4"

+.0001/+.0004

Over 1/4 to 3/4"

+.0001/+.0005

Over 3/4 to 1-1/2"

+.0002/+.0006

Over 1-1/2 to 2-3/4" +.0003/+.0007

REAMER ID TOLERANCES: From #60 a 1/4"

+.0005/+.0008

Over 1/4 to 1"

+.0006/+.0010

Over 1 to 1-1/2"

+.0008/+.0012

From 1 to 3mm +.006/+.012mm Over 3 to 6mm +.010/+.018mm Over 6 to 10mm +.013/+.022mm Over 10 to 18mm +.016/+.027mm Over 18 to 30mm +.020/+.033mm (F6 tolerance)

LENGTH

ANSI PART NO.

PRICE 1-5

5/32 .1578-.1575 (.166-.161 UNG)

1/4 5/16 *3/8 *1/2 1/4 5/16 *3/8 *1/2 *3/4 1/4 5/16 3/8 *1/2 *3/4

H-10-4 H-10-5 H-10-6 H-10-8 H-10-4 H-10-5 H-10-6 H-10-8 H-10-12 H-10-4 H-10-5 H-10-6 H-10-8 H-10-12

27.38 28.03 28.73 29.05 24.27 24.66 25.35 25.98 28.53 19.34 19.34 20.05 20.37 22.61

ID RANGE

.0135-.0291 #80-#70 .35-.70mm .0292-.0519 #69-3/64 .75-1.25mm .0520-.0625 #55-1/16 1.30-1.60mm

* Counterbored, leaving correct drill-bearing length and chip clearance (see page 6 for bearing length).

QUANTITY DISCOUNTS ORDERING EXAMPLES: H-20-16-.1250 H-20-16-.1772

Standard USA bushing, inch ID Standard USA bushing, mm ID (.1772 = 4.50mm)

Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 15BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

H ID RANGE

HEAD PRESS FIT OD

.0135-.0291 #80-#70 .35-.70mm .0292-.0519 #69-3/64 .75-1.30mm

.0520-.0634 #55-1/16 1.35-1.60mm

13/64 .2046-.2043 (.213-.208 UNG)

.0635-.0995 #52-#39 1.65-2.50mm

.0980-.1406 1/4 #40-9/64 .2516-.2513 2.50-3.50mm (.265-.260 UNG)

.1250-.1935 1/8-#10 3.20-4.90mm

5/16 .3141-.3138 (.327-.322 UNG)

.1935-.2280 #10-#1 4.90-5.80mm

3/8 .3766-.3763 (.390-.385 UNG)

.1875-.2570 3/16-F 4.75-6.50mm

13/32 .4078-.4075 (.421-.416 UNG)

LENGTH

ANSI PART NO.

PRICE 1-5

1/4 5/16 *3/8 *1/2 1/4 5/16 *3/8 *1/2 *3/4 1/4 5/16 3/8 *1/2 *3/4 *1 1/4 5/16 3/8 *1/2 *3/4 *1 1/4 5/16 3/8 *1/2 *5/8 *3/4 *1 *1-3/8 *1-1/2 1/4 5/16 3/8 1/2 5/8 3/4 *1 *1-3/8 *1-1/2 1/4 5/16 3/8 1/2 5/8 3/4 *1 1/4 5/16 3/8 1/2 3/4 *1 *1-3/8 *1-1/2 *1-3/4

H-13-4 H-13-5 H-13-6 H-13-8 H-13-4 H-13-5 H-13-6 H-13-8 H-13-12 H-13-4 H-13-5 H-13-6 H-13-8 H-13-12 H-13-16 H-13-4 H-13-5 H-13-6 H-13-8 H-13-12 H-13-16 H-16-4 H-16-5 H-16-6 H-16-8 H-16-10 H-16-12 H-16-16 H-16-22 H-16-24 H-20-4 H-20-5 H-20-6 H-20-8 H-20-10 H-20-12 H-20-16 H-20-22 H-20-24 H-24-4 H-24-5 H-24-6 H-24-8 H-24-10 H-24-12 H-24-16 H-26-4 H-26-5 H-26-6 H-26-8 H-26-12 H-26-16 H-26-22 H-26-24 H-26-28

27.38 28.03 28.73 29.05 24.27 24.66 25.35 25.98 28.53 19.66 19.66 20.05 20.37 22.61 25.74 11.25 11.36 12.05 12.39 14.05 18.19 9.70 10.34 10.87 11.25 12.39 13.79 18.70 25.28 27.00 7.98 8.49 9.00 9.19 9.39 9.51 11.36 19.22 21.77 7.29 7.98 8.30 8.49 8.82 9.00 10.72 7.29 7.66 8.30 8.49 9.00 10.72 12.05 13.41 14.81

* Counterbored, leaving correct drill-bushing length and clearance (see page 6 for bearing length).

ID RANGE

LENGTH

ANSI PART NO.

PRICE 1-5

1/4 5/16 3/8 1/2 5/8 3/4 *1 1/4 5/16 3/8 1/2 3/4 *1 *1-3/8 *1-1/2 *1-3/4 1/4 5/16 3/8 1/2 5/8 3/4 1 1/4 5/16 3/8 1/2 5/8 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4 1-3/8 1-1/2 1-3/4 2-1/8

H-28-4 H-28-5 H-28-6 H-28-8 H-28-10 H-28-12 H-28-16 H-32-4 H-32-5 H-32-6 H-32-8 H-32-12 H-32-16 H-32-22 H-32-24 H-32-28 H-36-4 H-36-5 H-36-6 H-36-8 H-36-10 H-36-12 H-36-16 H-40-4 H-40-5 H-40-6 H-40-8 H-40-10 H-40-12 H-40-16 H-40-22 H-40-24 H-40-28 H-40-34 H-48-4 H-48-5 H-48-6 H-48-8 H-48-10 H-48-12 H-48-16 H-48-20 H-48-22 H-48-24 H-48-28 H-48-34

7.29 7.98 8.30 8.49 8.82 9.00 10.72 7.29 7.66 8.30 8.49 9.00 10.72 12.05 13.41 14.81 8.30 7.29 7.98 7.98 8.30 8.30 9.00 8.30 7.29 7.66 7.66 8.30 8.30 9.00 12.05 12.77 13.79 15.97 9.00 7.98 8.30 8.30 8.69 9.00 9.70 12.39 12.39 13.08 13.92 16.35

.2340-.2900 7/16 A-L .4392-.4389 5.90-7.40mm (.453-.448 UNG)

1/2 .1875-.3160 .5017-.5014 3/16-O 4.75-8.00mm (.520-.515 UNG)

.2950-.3438 M-11/32 7.50-8.75mm

9/16 .5642-.5639 (.582-.577 UNG)

5/8 .3125-.4375 .6267-.6264 5/16-7/16 7.90-11.00mm (.645-.640 UNG)

.3125-.5312 3/4 5/16-17/32 .7518-.7515 7.90-13.50mm (.770-.765 UNG)

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 16BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

HEAD PRESS FIT ID RANGE

.5000-.6562 1/2-21/32 12.50-16.50mm

7/8 .8768-.8765 (.895-.890 UNG)

.5000-.7656 1/2-49/64 12.50-19.50mm

1 1.0018-1.0015 (1.020-1.015 UNG)

.8594-.9375 55/64-15/16 22.00-24.00mm

1-1/4 1.2520-1.2517 (1.270-1.265 UNG)

.6250-1.0312 5/8–1-1/32 16.00-26.00mm

1-3/8 1.3772-1.3768 (1.395-1.390 UNG)

1.0000-1.3906 1–1-25/64 26.00-35.00mm

1-3/4 1.7523-1.7519 (1.770-1.765 UNG)

1.3750-1.7656 1-3/8-1-49/64 35.00-45.00mm

2-1/4 2.2525-2.2521 (2.270-2.265 UNG)

LENGTH

ANSI PART NO.

PRICE 1-5

1/2 5/8 3/4 1 1-1/4 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 1/2 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 5/8 3/4 1 1-1/4 1-1/2 1-3/4 2 1/2 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3

H-56-8 H-56-10 H-56-12 H-56-16 H-56-20 H-56-22 H-56-24 H-56-28 H-56-34 H-56-40 H-64-8 H-64-12 H-64-16 H-64-22 H-64-24 H-64-28 H-64-34 H-64-40 H-64-48 H-80-10 H-80-12 H-80-16 H-80-20 H-80-24 H-80-28 H-80-32 H-88-8 H-88-12 H-88-16 H-88-22 H-88-24 H-88-28 H-88-34 H-88-40 H-88-48 H-112-12 H-112-16 H-112-22 H-112-24 H-112-28 H-112-34 H-112-40 H-112-48 H-144-16 H-144-22 H-144-24 H-144-28 H-144-34 H-144-40 H-144-48

10.02 10.02 10.22 10.72 11.74 11.74 13.08 14.44 16.35 19.54 10.34 10.34 11.25 12.05 14.05 15.83 18.52 21.25 32.83 15.83 15.13 16.67 18.52 19.92 21.25 24.13 16.85 15.45 17.00 18.90 20.23 21.58 22.41 25.18 39.26 22.28 20.55 22.78 23.80 24.82 28.21 31.28 44.17 26.50 29.44 31.09 31.09 36.51 40.09 50.83

A great speaker is one whose spirit enters the souls of his listeners.

If you have no goals you have nothing to reach for.

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 17BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/04)

HEAD PRESS FIT EXTENDED RANGE (LARGE)

H ID RANGE

1.5000 1.5000 1.5000 1.7500 2.2500 2.2500 2.5000 2.5000 2.7500 3.0000 3.0000 3.3750 3.3750 3.6250 to to to to to to to to to to to to to to 2.0000 2.1250 2.3750 2.5000 2.7500 2.8750 3.0000 3.1250 3.3750 3.6250 3.7500 3.8750 4.1250 4.2500 2-3/8

2-1/2

2-3/4

3-1/4

3-3/8

3-1/2

3-3/4

4-1/4

4-3/8

4-1/2

4-3/4

2.3775 2.5025 2.7525 3.0028 3.2528 3.3778 3.5028 3.7528 4.0028 4.2530 4.3780 4.5030 4.7530 5.0030 2.3771 2.5021 2.7521 3.0023 3.2523 3.3773 3.5023 3.7523 4.0023 4.2525 4.3775 4.5025 4.7525 5.0025

LENGTH

ANSI NO.

152

160

176

192

3/4

31.28

30.59

47.02

50.30

33.34

33.98

49.20

1-1/4

34.98

35.65

1-1/2

38.03

1-3/4

208

216

224

240

256

272

280

288

304

320

65.60 66.14

68.08

70.28

78.54

80.11

83.21

86.68

90.49 95.77

52.05

66.81 67.60

68.88

73.26

80.67

83.08

86.00

89.29

93.11 99.25

50.41

54.30

67.60 68.46

71.72

76.53

83.28

85.64

87.76

91.87

95.97 102.51

38.74

51.20

56.12

68.71 69.62

72.01

80.47

86.13

88.31

91.29

95.23

98.76 106.36

39.66

40.29

52.48

57.94

70.64 71.43

78.85

84.54

89.10

92.90

93.78

97.60 101.80 110.18

41.55

42.34

55.58

60.98

72.34 73.01

82.84

88.73

92.21

95.47

96.88 100.58 104.52 114.07

2-1/8

42.64

43.44

56.48

2-1/4

45.37

46.23

58.13

63.41

75.56 76.71

86.68

92.50

95.47

98.76 100.34 104.52 108.36 118.88

2-1/2

44.62

47.91

60.79

65.77

77.80 78.90

90.37

95.97

98.76 102.04 104.52 108.36 111.69 122.21

2-3/4

52.05

53.04

62.50

67.06

80.67 81.45

95.23

99.79 102.51 105.81 108.78 112.05 115.89 126.39

60.44

61.51

64.86

70.16

83.08 83.76

99.67 104.17 106.36 109.51 112.61 116.26 120.02 130.41

3-1/4

62.14

63.32

67.06

72.28

85.08 86.00 104.52 108.78 110.43 113.51 117.53 120.93 124.75 134.84

3-1/2

64.09

65.30

69.00

75.44

87.22 88.31 110.25 113.45 114.36 117.89 122.02 125.49 129.19 140.80

3-3/4

65.40

66.66

70.70

76.83

89.77 90.50 115.65 118.44 119.35 122.63 127.35 130.95 133.02 146.80

66.81

68.08

73.01

78.54

92.21 93.69 120.44 123.12 123.90 127.73 132.41 136.43 140.12 152.14

4-1/4

68.88

70.19

75.20

80.67

94.39 95.29 124.38 127.92 129.19 133.38 137.94 142.26 146.80 159.38

4-1/2

71.53

72.61

77.62

83.21

96.51 97.30 128.54 132.66 134.84 138.84 143.58 148.14 152.81 165.94

4-3/4

73.38

74.78

80.11

85.45

99.25 100.22 132.46 137.74 140.80 144.68 149.59 150.44 159.27 172.31

76.16

77.61

83.82

89.22 102.76 103.62 136.97 142.50 146.13 150.63 155.62 153.78 165.45 178.86

5-1/2

107.99 141.39 152.14 157.43 161.99 167.27 172.92 178.33 190.05

161.79 168.56 173.64 179.11 185.07 191.33 203.54

6-1/2

104

179.67 185.07 191.33 204.75 203.34 216.46

112

203.45 211.37 220.11 231.41

DIMENSIONS F G

2-3/4 3/8

3 3/8

3-1/4 3/8

3-1/2 3/8

3-5/8 3/8

3-7/8 1/2

4-1/8 1/2

4-3/8 1/2

4-5/8 1/2

4-3/4 1/2

4-7/8 1/2

5-1/8 1/2

5-3/8 1/2

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -3 Net 1.00

4 -6 8% .92

7 -12 18% .82

13 -24 25% .75

25 -49 30% .70

50 Up 33% .67

MANUFACTURING CO. 18BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

HEAD PRESS FIT CARBIDE ID RANGE

.0280-.0468 #70-#56 .75-1.15mm .0469-.0625 3/64-1/16 1.20-1.55mm .0550-.0995 #54-#39 1.40-2.50mm .0995-.1360 #39-#29 2.55-3.40mm .1285-.1875 #30-3/16 3.30-4.75mm

.1875-.2500 3/16-1/4 4.80-6.30mm

.2188-.3125 7/32-5/16 5.60-7.90mm

.3125-.4219 5/16-27/64 8.00-10.50mm

.3750-.5000 3/8-1/2 9.60-12.50mm

.5000-.6250 1/2-5/8 13.00-15.50mm

5/32 .1578-.1575

LENGTH

ANSI PART NO.

PRICE 1-5

5/16

HC-10-5

1/2

HC-10-8

Contact Factory

5/16

HC-10-5

1/2

HC-10-8

13/64 .2046-.2043

5/16

HC-13-5

1/2

HC-13-8

1/4 .2516-.2513

5/16

HC-16-5

1/2

HC-16-8

5/16

HC-20-5

1/2

HC-20-8

3/4

HC-20-12

HC-20-16

5/16

HC-26-5

1/2

HC-26-8

5/16 .3141-.3138

13/32 .4078-.4075

1/2 .5017-.5014

5/8 .6267-.6264

3/4 .7518-.7515

7/8 .8768-.8765

3/4

HC-26-12

HC-26-16

5/16

HC-32-5

1/2

HC-32-8

3/4 1

Contact Factory

HC-48-12

.7500-1.0000 3/4-1 19.50-25.00mm

HC-48-22

1/2

HC-56-8

3/4

HC-56-12

HC-56-16

1-3/8

HC-56-22

1-3/4

HC-56-28

HC-64-16

Contact Factory

1-3/8 1.3772-1.3768

3/4

HC-88-12

HC-88-16

1-3/8 HC-88-22 1-3/4 HC-88-28

Contact Factory

2-1/8 HC-88-34 2-1/2 HC-88-40

1.0000-1.3750 1-–1-3/8 26.00-34.00mm

HC-112-16

1-3/4 HC-112-28

1-3/4 1.7523-1.7519

HC-112-32

Contact Factory

2-1/8 HC-112-34

Note: Due to manufacturing requirements, head dimensions of some carbide bushings may differ slightly from ANSI standards. Most carbide bushings have steel heads.

HC-112-48

HC-144-16

2-1/4 2.2525-2.2521

1-3/4 HC-144-28 Contact Factory 2-1/8 HC-144-34 2-1/2 HC-144-40 3

180° Pivot

Contact Factory

1-3/8 HC-144-22

Contact HC-48-16 Factory

1-3/8

1-3/4 HC-64-28

1.3750-1.7500 1-3/8–1-3/4 35.00-44.00mm

HC-40-12 Contact HC-40-16 Factory

3/4

HC-64-12

2-1/2 HC-112-40

3/4

HC-48-8

HC-64-8

3/4

PRICE 1-5

1-3/8 HC-112-22

HC-40-8

1/2

HC-40-22

ANSI PART NO.

1-3/8 HC-64-22

Contact HC-32-12 Factory HC-32-16

1-3/8

LENGTH

1 1.0018-1.0015

Contact Factory

HC-32-22

.5000-.7500 1/2-3/4 13.00-19.00mm

Contact Factory

1-3/8

ID RANGE

HC-144-48

What pivots 180° and takes more tugging than an eye bolt?

360° Rotation

Swivel Hoist Rings — from Carr Lane, of course.

MANUFACTURING CO. 19BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(5/99)

HEAD PRESS FIT METRIC

HM OD (s6)

ID RANGE (G6)

.35-1.00mm 1.01-1.80mm

LENGTH

ANSI PART NO.

PRICE 1-5

HM-4-6 HM-4-9 HM-4-6 HM-4-9 HM-5-6 HM-5-9 HM-6-8 HM-6-12 HM-6-16 HM-7-8 HM-7-12 HM-7-16 HM-8-8 HM-8-12 HM-8-16 HM-10-10 HM-10-16 HM-10-20 HM-12-10 HM-12-16 HM-12-20 HM-15-12 HM-15-20 HM-15-25 HM-18-12 HM-18-20 HM-18-25 HM-22-16 HM-22-28 HM-22-36 HM-26-16 HM-26-28 HM-26-36 HM-30-20 HM-30-36 HM-30-45 HM-35-20 HM-35-36 HM-35-45 HM-42-25 HM-42-45 HM-42-56 HM-48-25 HM-48-45 HM-48-56 HM-55-30 HM-55-56 HM-55-67 HM-62-30 HM-62-56 HM-62-67

31.90 33.48 28.27 29.53 13.10 14.04 12.05 13.10 16.07 9.89 10.70 11.07 9.89 10.70 11.07 9.89 10.50 12.49 9.89 10.50 12.49 8.93 10.50 10.50 9.68 10.50 11.31 11.91 13.69 15.24 12.05 13.10 16.37 17.62 23.22 24.76 17.99 23.58 25.14 23.95 28.92 36.45 23.95 28.92 36.45 34.30 46.71 59.21 39.61 51.37 58.94

4mm 4.027-4.019mm

1.81-2.60mm

5mm 5.027-5.019mm

2.61-3.30mm

6mm 6.027-6.019mm

3.31-4.00mm

7mm 7.032-7.023mm

4.01-5.00mm

8mm 8.032-8.023mm

5.01-6.00mm

10mm 10.032-10.023mm

6.01-8.00mm

12mm 12.039-12.028mm

8.01-10.00mm

15mm 15.039-15.028mm

18mm 10.01-12.00mm 18.039-18.028mm 22mm 12.01-15.00mm 22.048-22.035mm 26mm 15.01-18.00mm 26.048-26.035mm 30mm 18.01-22.00mm 30.048-30.035mm 35mm 22.01-26.00mm 35.059-35.043mm 42mm 26.01-30.00mm 42.059-42.043mm 48mm 30.01-35.00mm 48.059-48.043mm 55mm 35.01-42.00mm 55.072-55.053mm 42.01-48.00mm

62mm 62.072-62.053mm

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

OD (s6)

ID RANGE (G6)

LENGTH

48.01-55.00mm

70mm 70.078-70.059mm

ANSI PART NO.

PRICE 1-5

HM-70-30 HM-70-56 HM-70-67 HM-78-35 HM-78-67 HM-78-78 HM-85-35 HM-85-67 HM-85-78 HM-95-40 HM-95-78 HM-95-105 HM-105-40 HM-105-78 HM-105-105 HM-115-45 HM-115-89 HM-115-112 HM-125-45 HM-125-89 HM-125-112

56.02 64.58 69.44 62.36 74.51 77.96 83.62 105.81 110.75 89.41 115.74 142.13 98.13 121.68 148.20 108.45 139.43 164.60 122.43 156.45 184.38

* Small metric drill sizes through .80mm are counterbored 1.00mm diameter, with 3mm drill-bearing length.

Note: The “length” listed on this page for a metric head-press-fit bushing refers to its overall length, while the USA version’s “length” is its length under the head.

CARR LANE: We’re often imitated . . . but never duplicated! MANUFACTURING CO.

20BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

SERRATED PRESS FIT 1/2 LENGTH

LENGTH

APPLICATIONS: Similar to a P bushing, but with top serrations to prevent rotation in soft materials. Recommended in high-torque situations for materials such as magnesium, aluminum, masonite, or wood. Finish-ground OD ensures accurate ID location. Serrations also resist axial force to prevent pushing the bushing through the jig plate.

ORDERING EXAMPLES: SP-26-16-.1875 SP-26-16-.1772

Standard USA bushing, inch ID Standard USA bushing, mm ID (.1772 - 4.50mm) SP-26-16-.1875 REAMER Reamer tolerance on ID SP-26-16-.1875 NCB No counterbore on long bushings marked with * (no counterbore is standard on all other bushings) SPM-8-12-4.50 Standard metric bushing Prices shown here apply to standard bushings only, for a standard drill size within the stated ID range. See back cover for decimal equivalents. To price non-standard sizes, including all reamer and tap-guide bushings, see page 7.

ID RANGE

.0520-.0995 #55-#39 1.35-2.50mm

13/64 .2031-.2029

.0980-.1406 #40-9/64 2.50-3.50mm

1/4 .2500-.2498

.1250-.1935 1/8-#10 3.20-4.90mm

5/16 .3125-.3123

.1562-.2570 5/32-F 4.00-6.50mm

13/32 .4062-.4060

.1562-.3160 5/32-O 4.00-8.00mm

1/2 .5000-.4998

.3125-.4375 5/16-7/16 7.90-11.00mm

5/8 .6250-.6248

.3125-.5312 5/16-17/32 8.00-13.00mm

3/4 .7500-.7498

.5000-.6562 7/8 1/2-21/32 .8750-.8748 13.00-16.50mm .5000-.7656 1 1/2-49/64 1.0000-.9998 13.00-19.00mm

LENGTH

ANSI PART NO.

PRICE 1-5

1/4 5/16 3/8 1/2 1/4 5/16 3/8 1/2 1/4 5/16 3/8 1/2 3/4 5/16 3/8 1/2 3/4 *1 5/16 3/8 1/2 3/4 *1 3/8 1/2 3/4 1 3/8 1/2 3/4 1 3/8 1/2 3/4 1 1/2 3/4 1 1-3/8

SP-13-4 SP-13-5 SP-13-6 SP-13-8 SP-16-4 SP-16-5 SP-16-6 SP-16-8 SP-20-4 SP-20-5 SP-20-6 SP-20-8 SP-20-12 SP-26-5 SP-26-6 SP-26-8 SP-26-12 SP-26-16 SP-32-5 SP-32-6 SP-32-8 SP-32-12 SP-32-16 SP-40-6 SP-40-8 SP-40-12 SP-40-16 SP-48-6 SP-48-8 SP-48-12 SP-48-16 SP-56-6 SP-56-8 SP-56-12 SP-56-16 SP-64-8 SP-64-12 SP-64-16 SP-64-22

9.92 11.23 11.70 12.21 7.75 8.24 8.92 9.42 6.44 6.75 7.08 7.44 8.06 5.76 6.26 6.44 7.08 8.13 5.76 6.26 6.44 7.08 8.13 5.95 5.95 6.44 6.75 6.44 6.44 6.75 7.44 8.74 7.75 8.06 8.44 8.06 8.06 8.56 9.12

* Counterbored, leaving correct drill-bushing length and clearance (see page 6 for bearing length).

STANDARD ID TOLERANCES: From #55 to 1/4"

+.0001/+.0004

Over 1/4 to 3/4"

+.0001/+.0005

Over 3/4 to 1-1/2â&#x20AC;?

+.0002/+.0006

From 1 to 3mm +.002/+.008mm Over 3 to 6mm +.004/+.012mm Over 6 to 10mm +.005/+.014mm Over 10 to 18mm +.006/+.017mm Over 18 to 19mm +.007/+.020mm (G6 tolerance)

REAMER ID TOLERANCES: From #60 to 1/4"

+.0005/+.0008

Over 1/4 to 1"

+.0006/+.0010

From 1 to 3mm +.006/+.012mm Over 3 to 6mm +.010/+.018mm Over 6 to 10mm +.013/+.022mm Over 10 to 18mm +.016/+.027mm Over 18 to 19mm +.020/+.033mm (F6 tolerance)

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 21BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

SPM

SERRATED PRESS FIT METRIC

OD (h5)

ID RANGE (G6)

1.00-1.80mm 5mm 5.000-4.995mm 1.81-2.60mm

2.61-3.30mm

6mm 6.000-5.995mm

4.01-5.00mm

5.01-6.00mm

6.01-8.00mm

7mm 7.000-6.994mm

8mm 8.000-7.994mm

PRICE 1-5

6mm

SPM-5-6

27.88

9mm

SPM-5-9

32.90

6mm

SPM-5-6

11.56

9mm

SPM-5-9

13.64

8mm

SPM-6-8

9.61

12mm SPM-6-12

10.98

16mm SPM-6-16

10.98

8mm

3.31-4.00mm

ANSI PART NO.

LENGTH

7.86

SPM-7-8

We Make Tooling Simple The world’s largest manufacturer of tooling components has the parts

12mm SPM-7-12

8.66

you need for today’s

16mm SPM-7-16

9.39

changing industry.

8mm

7.86

We can save you time,

SPM-8-8

Handles & Knobs

12mm SPM-8-12

8.66

16mm SPM-8-16

9.39

10mm SPM-10-10

7.51

to look for several

16mm SPM-10-16

8.25

tooling sources.

20mm SPM-10-20

9.47

Most of our items are

10mm SPM-12-10

7.51

12mm 16mm SPM-12-16 12.000-11.992mm

8.25

20mm SPM-12-20

9.47

and U.S sizes. Many

10mm 10.000-9.994mm

since you don’t have

available in both metric

12mm SPM-15-12

6.93

items are available in

15mm 8.01-10.00mm 20mm SPM-15-20 15.000-14.992mm

7.86

stainless steel. Send for

25mm SPM-15-25

7.86

our free illustrated catalog

12mm SPM-18-12

7.51

18mm 20mm SPM-18-20 18.000-17.992mm

8.66

25mm SPM-18-25

8.66

of tooling components anywhere.

10.01-12.00mm

16mm SPM-22-16

9.39

22mm 12.01-15.00mm 22.000-21.991mm 28mm SPM-22-28

9.83

36mm SPM-22-36

9.83

16mm SPM-26-16

9.39

26mm 28mm SPM-26-28 26.000-25.991mm

9.98

36mm SPM-26-36

10.62

15.01-18.00mm

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

Alignment Pins

Toggle Clamps

Drill Bushings

with the widest assortment

Chuck Jaws

• Specialty Clamps • Spring-Loaded Devices • Locators • Nuts, Bolts, Washers, Screws • Clamps Straps • Jig and Fixture Bases • Plug Gages • Supports, Rests and Feet • Threaded Inserts • CAD/CAM Tooling Library

Modular Fixturing

Hoist Rings

MANUFACTURING CO. 22BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

SLIP/FIXED RENEWABLE

APPLICATIONS: Replaceable bushing generally used with a liner bushing and lockscrew. Use when you expect to replace bushings during the tooling’s lifetime, or when you want to switch bushings to perform multi-step operations with the same tooling. SF bushings combine the benefits of older S-type slip-renewable and F-type fixed-renewable bushings: One side has a small recess for fixed mounting; the other has a locking recess that allows the bushing to slip down, then lock in place by rotating it. S and F types are now obsolete (except in carbide) and combination SF bushings will be furnished at no extra charge.

USA BODY OD 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/4 1-3/8 1-1/2 1-3/4 2-1/4

F DIA

3/16 3/32 5/16 7/16 35/64 5/8 5/8 1/4 1/8 51/64 7/8 7/8 1-3/64 1-1/4 1-27/64 1-5/8 3/8 3/16 1-51/64 1-7/8 2-19/64 3/8 3/16 2-51/64

3/32 9/64 11/64 15/64 15/64 19/64 23/64 23/64 27/64 31/64 19/32 43/64 25/32 51/64 1 1-1/4

55° 30° 65° 30° 30° 65° 65° 30° 50° 30° 35° 30° 30° 30° 30° 25°

17/64 23/64 5/8 1/2 29/64 29/64 3/4 5/8 37/64 37/64 7/8 3/4 53/64 1-7/64 59/64 1-1/64 1-19/64 1-7/64 1-9/64 1-41/64 1-25/64 1-57/64 1-41/64

LOCK SCREW

LS-0 TW-2 LS-1 TW-2 TW-2 LS-1 TW-2 TW-2 LS-1 TW-7

LS-3

METRIC BODY OD 8mm 10mm 12mm 15mm 18mm 22mm 26mm 30mm 35mm 42mm 48mm 55mm 62mm 70mm 78mm 85mm 95mm 105mm

SF-20-16-.1250 SF-20-16-.1772

Standard USA bushing, inch ID Standard USA bushing, mm ID (.1772 = 4.50mm) SF-20-16-.1250 REAMER Reamer tolerance on ID SF-20-16-.1250 NCB No counterbore on long bushings marked with * (no counterbore is standard on all other bushings) SFC-20-16-.1250 Carbide bushing SFM-8-16-4.50 Standard metric bushing

LS-2

For dimensions of larger USA sizes, see page 26 (Extended Range).

F DIA

ORDERING EXAMPLES:

Prices shown here apply to standard bushings only, for a standard drill size within the stated ID range. See back cover for decimal equivalents. To price non-standard sizes, including all reamer and tap-guide bushings, see page 7.

STANDARD ID TOLERANCES: L

15mm 4.5mm 65° 6mm 3mm 18mm 6mm 65° 22mm 7.5mm 60° 26mm 8mm 4mm 9.5mm 50° 30mm 11.5mm 50° 34mm 13mm 35° 39mm 15.5mm 35° 46mm 10mm 5.5mm 19mm 30° 52mm 22mm 30° 59mm 25.5mm 30° 66mm 28.5mm 30° 74mm 32.5mm 25° 82mm 36.5mm 25° 90mm 40.5mm 25° 12mm 7mm 100mm 45.5mm 25° 110mm 50.5mm 20° 120mm 55.5mm 20° 130mm 60.5mm 20°

R 11.5mm 13mm 16mm 18mm 20mm 23.5mm 26mm 29.5mm 32.5mm 36mm 41mm 45mm 49mm 53mm 58mm 63mm 68mm 73mm

LOCK SCREW

From #80 to 1/4"

+.0001/+.0004

LSM-1 LSM-2

Over 1/4 to 3/4"

+.0001/+.0005

Over 3/4 to 1-1/2"

+.0002/+.0006

Over 1-1/2 to 2-3/4"

+.0003/+.0007

LSM-3 LSM-4

LSM-5 LSM-6

REAMER ID TOLERANCES: LSM-7 LSM-8

From #60 to 1/4"

+.0005/+.0008

Over 1/4 to 1"

+.0006/+.0010

Over 1 to 1-1/2"

+.0008/+.0012

From 1 to 3mm +.006/+.012mm Over 3 to 6mm +.010/+.018mm Over 6 to 10mm +.013/+.022mm Over 10 to 18mm +.016/+.027mm Over 18 to 30mm +.020/+.033mm (F6 tolerance)

MANUFACTURING CO. 23BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/98)

SF ID RANGE

SLIP/FIXED RENEWABLE OD

.0135-.0291 #80-#70 .35-.70mm

.0292-.0519 #69-3/64 .75-1.25mm 3/16 .1875-.1873 .0520-.0634 #55-1/16 1.30-1.60mm

.0635-.0980 #52-#40 1.65-2.50mm

.0995-.1405 1/4 #39-#28 .2500-.2498 2.55-3.50mm

ANSI LENGTH PART NO.

*1/4 *5/16 *3/8 *1/2 *5/8 *3/4 1/4 *5/16 *3/8 *1/2 *5/8 *3/4 1/4 *5/16 *3/8 *1/2 *5/8 *3/4 1/4 *5/16 *3/8 *1/2 *5/8 *3/4 1/4 5/16 *3/8 *1/2 *5/8 *3/4

SF-12-4 SF-12-5 SF-12-6 SF-12-8 SF-12-10 SF-12-12 SF-12-4 SF-12-5 SF-12-6 SF-12-8 SF-12-10 SF-12-12 SF-12-4 SF-12-5 SF-12-6 SF-12-8 SF-12-10 SF-12-12 SF-12-4 SF-12-5 SF-12-6 SF-12-8 SF-12-10 SF-12-12 SF-16-4 SF-16-5 SF-16-6 SF-16-8 SF-16-10 SF-16-12

PRICE LOCK SCREW 1-5

33.33 33.85 34.46 34.88 39.58 44.68 28.53 28.86 29.37 30.08 31.47 32.83 21.77 LS-0 22.02 22.35 22.72 23.75 24.90 13.08 13.41 13.59 14.05 15.13 15.97 12.05 12.05 12.39 TW-2 13.08 13.92 14.81

ID RANGE

ANSI LENGTH PART NO.

.0135-.0291 #80-#70 .35-.70mm .0292-.0519 #69-3/64 .75-1.30mm .0520-.0634 #55-1/16 1.35-1.60mm .0635-.0934 5/16 #52-#43 .3125-.3123 1.65-2.35mm

.0935-.1249 #42-#31 2.40-3.15mm

.1250-.1935 1/8-#10 3.20-4.90mm

.1935-.2280 3/8 #10-#1 .3750-.3748 4.90-5.80mm

Why settle for the rest when you can have the best?

.2340-.2900 7/16 A-L .4375-.4373 5.90-7.40mm

*1/4 *5/16 *3/8 *1/2 *3/4 *5/16 *3/8 *1/2 *3/4 *5/16 *3/8 *1/2 *3/4 5/16 *3/8 *1/2 *3/4 *1 5/16 3/8 *1/2 *3/4 *1 *1-3/8 5/16 3/8 1/2 5/8 *3/4 *1 *1-3/8 1/4 5/16 3/8 1/2 5/8 3/4 *1 1/4 5/16 3/8 1/2 5/8 3/4 *1

SF-20-4 SF-20-5 SF-20-6 SF-20-8 SF-20-12 SF-20-5 SF-20-6 SF-20-8 SF-20-12 SF-20-5 SF-20-6 SF-20-8 SF-20-12 SF-20-5 SF-20-6 SF-20-8 SF-20-12 SF-20-16 SF-20-5 SF-20-6 SF-20-8 SF-20-12 SF-20-16 SF-20-22 SF-20-5 SF-20-6 SF-20-8 SF-20-10 SF-20-12 SF-20-16 SF-20-22 SF-24-4 SF-24-5 SF-24-6 SF-24-8 SF-24-10 SF-24-12 SF-24-16 SF-28-4 SF-28-5 SF-28-6 SF-28-8 SF-28-10 SF-28-12 SF-28-16

PRICE LOCK SCREW 1-5

33.33 33.85 34.46 34.88 44.68 28.86 29.37 30.08 32.83 22.02 22.35 22.72 24.90 13.28 13.59 14.05 15.97 19.54 12.05 12.39 13.08 14.80 17.51 22.27 11.74 12.05 12.58 13.41 14.29 17.17 21.90 8.30 8.82 9.19 9.70 10.02 10.34 11.74 8.30 8.82 9.19 9.70 10.02 10.34 11.74

LS-1 RC-01 RK-01 RK-10

TW-2

* Counterbored, leaving correct drill-bearing length and clearance (see page 6 for bearing length).

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 24BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

SLIP/FIXED RENEWABLE ID RANGE

ANSI PRICE LOCK LENGTH PART NO. 1-5 SCREW

5/16 3/8 1/2 .1405-.1889 *3/4 #28-3/16 *1 3.60-4.75mm *1-3/8 *1-1/2 *1-3/4 1/2 .5000-.4998 5/16 3/8 1/2 .1890-.3438 3/4 #12-11/32 *1 *1-3/8 4.80-8.70mm *1-1/2 *1-3/4 *2-1/8 1/4 5/16 .2950-.3438 3/8 9/16 M-11/32 1/2 7.50-8.80mm .5625-.5623 5/8 3/4 1 3/8 1/2 .3480-.4375 5/8 5/8 S-7/16 .6250-.6248 3/4 8.90-11.00mm 1 1-1/4 3/8 1/2 3/4 1 .2812-.5625 1-3/8 3/4 9/32-9/16 .7500-.7498 1-1/2 7.20-14.00mm 1-3/4 2-1/8 *2-1/2 *3 1/2 5/8 .5469-.6562 7/8 3/4 35/64-21/32 1 13.50-16.50mm .8750-.8748 1-1/4 1-1/2 1/2 3/4 1 .4688-.7812 1-3/8 1 15/32-25/32 1.0000-.9998 1-1/2 12.00-19.50mm 1-3/4 2-1/8 2-1/2 3

SF-32-5 SF-32-6 SF-32-8 SF-32-12 SF-32-16 SF-32-22 SF-32-24 SF-32-28 SF-32-5 SF-32-6 SF-32-8 SF-32-12 SF-32-16 SF-32-22 SF-32-24 SF-32-28 SF-32-34 SF-36-4 SF-36-5 SF-36-6 SF-36-8 SF-36-10 SF-36-12 SF-36-16 SF-40-6 SF-40-8 SF-40-10 SF-40-12 SF-40-16 SF-40-20 SF-48-6 SF-48-8 SF-48-12 SF-48-16 SF-48-22 SF-48-24 SF-48-28 SF-48-34 SF-48-40 SF-48-48 SF-56-8 SF-56-10 SF-56-12 SF-56-16 SF-56-20 SF-56-24 SF-64-8 SF-64-12 SF-64-16 SF-64-22 SF-64-24 SF-64-28 SF-64-34 SF-64-40 SF-64-48

10.02 10.34 11.25 11.74 13.41 15.45 16.48 17.88 8.82 9.19 9.51 10.34 11.74 14.05 15.10 16.15 30.08 8.30 8.82 9.19 9.70 10.02 10.34 11.74 9.39 9.39 9.70 10.02 10.54 14.05 9.19 9.39 10.02 10.72 14.04 15.13 16.35 18.52 31.60 43.85 11.74 12.05 12.27 13.08 14.29 15.83 11.74 12.05 13.08 14.29 15.45 17.17 20.55 33.64 44.68

LS-1 RC-01 RK-01 RK-10

TW-2

ID RANGE

ANSI PRICE LOCK LENGTH PART NO. 1-5 SCREW

3/4 1 1-3/8 .7188-1.0625 1-3/8 1-1/2 23/32–1-1/16 1.3750-1.3747 1-3/4 18.50-27.00mm 2-1/8 2-1/2 3 3/4 1 1-3/8 .9688-1.4062 1-3/4 1-1/2 31/32–1-13/32 1.7500-1.7497 1-3/4 25.00-35.00mm 2-1/8 2-1/2 3 3/4 1 1-3/8 1.3438-1.8750 2-1/4 1-1/2 1-11/32–1-7/8 2.2500-2.2496 1-3/4 35.00-47.00mm 2-1/8 2-1/2 3

TW-2

SF-88-12 SF-88-16 SF-88-22 SF-88-24 SF-88-28 SF-88-34 SF-88-40 SF-88-48 SF-112-12 SF-112-16 SF-112-22 SF-112-24 SF-112-28 SF-112-34 SF-112-40 SF-112-48 SF-144-12 SF-144-16 SF-144-22 SF-144-24 SF-144-28 SF-144-34 SF-144-40 SF-144-48

17.88 20.23 21.90 23.30 25.16 28.21 38.05 49.48 25.98 23.80 25.98 27.72 29.56 33.33 40.99 49.48 35.20 32.12 36.29 36.51 38.24 43.55 48.07 56.76

LS-2 RC-02 RK-02 RK-12

LS-3 RC-03 RK-03 RK-14

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

LS-1 RC-01 RK-01 RK-11

TW-7

LS-2 RC-02 RK-02 RK-12

The biggest disappointments come to those who get what’s coming to them.

* Counterbored, leaving correct drill-bearing length and clearance (see page 6 for bearing length).

MANUFACTURING CO. 25BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/03)

SLIP/FIXED RENEWABLE EXTENDED RANGE (LARGE)

ID RANGE

1.0937 1.5000 1.5000 1.7500 2.2500 2.2500 2.6250 2.5000 2.7500 3.0000 3.0000 3.3750 3.3750 3.6250 to to to to to to to to to to to to to to 1.5312 2.0312 2.2812 2.5312 2.6250 2.8750 2.8750 3.1250 3.2500 3.5000 3.6250 3.7500 4.0000 4.2500 2"

2-1/2

2-3/4

3-1/4

3-1/2

3-3/8

3-3/4

4-1/4

4-3/8

4-1/2

4-3/4

2.0000 2.5000 2.7500 3.0000 3.2500 3.3750 3.5000 3.7500 4.0000 4.2500 4.3750 4.5000 4.7500 5.0000 1.9996 2.4996 2.7496 2.9996 3.2496 3.3746 3.4996 3.7496 3.9996 4.2496 4.3746 4.4996 4.7496 4.9996

LENGTH

ANSI NO.

128

160

176

192

208

216

224

3/4

37.36

59.17

68.08

80.11

81.82

83.94

85.82

87.64

240

256

272

95.77 98.58

280

288

304

320

101.80 106.06 110.24 116.25

38.23

61.04

71.37

82.11

84.54

86.73

89.22

91.11

97.85 101.50 104.95 109.33 113.45 120.44

1-1/4

40.46

63.60

72.89

84.84

87.46

90.31

92.57

94.56

101.42 104.77 108.05 112.87 116.61 124.09

1-1/2

43.86

65.77

79.57

87.04

90.50

94.20

96.39

98.53

104.22 107.82 111.33 115.53 119.83 128.46

1-3/4

45.00

68.70

80.17

89.95

94.21

97.85

99.85 102.41 107.82 112.61 113.51 118.80 123.12 129.11

92.93

97.30 101.85 103.86 106.22 111.33 116.01 117.83 122.02 126.46 137.28

48.96

72.34

83.21

2-1/8

50.41

75.44

85.64

2-1/4

53.92

76.83

88.14

95.77 101.13 105.72 108.36 110.43 115.34 119.83 122.02 126.46 130.65 142.12

2-1/2

55.52

80.11

90.56

99.07 104.22 110.43 112.37 114.80 118.93 123.84 126.46 130.65 135.02 146.80

2-3/4

58.49

82.36

93.30 102.76 108.78 114.80 116.80 119.47 123.17 128.03 131.00 135.21 139.70 151.55

60.98

84.74

95.77 106.36 112.73 119.47 121.72 124.09 127.67 132.39 135.75 140.12 144.31 156.35

3-1/4

65.05

87.04

98.53 110.24 117.53 124.75 127.35 129.82 132.29 136.97 141.04 145.17 149.59 161.79

3-1/2

68.16

89.77 100.95 113.99 122.02 130.13 132.46 135.02 136.97 141.89 146.50 150.68 154.95 167.94

3-3/4

70.70

91.81 103.71 118.44 127.01 135.75 137.94 140.49 142.16 147.17 152.64 156.71 161.07 174.93

72.82

94.20 106.22 123.12 131.20 139.70 142.85 146.07 147.78 151.60 158.65 162.90 167.45 181.12

4-1/4

74.89

96.88 108.59 128.09 135.75 143.58 147.34 151.55 154.16 159.38 165.09 169.82 174.93 185.12

4-1/2

77.20

99.67 111.33 133.13 138.96 147.17 152.27 157.18 160.71 165.94 171.28 176.39 181.04 196.97

4-3/4

79.38 102.76 114.36 138.13 144.68 150.99 157.00 162.72 167.03 172.38 178.33 183.79 189.14 204.44

81.27 106.90 118.75 143.58 149.42 154.89 162.10 168.36 173.42 179.11 184.94 190.90 196.92 211.37

5-1/2

162.72 173.33 179.30 186.22 192.41 198.54 204.80 211.12 226.13

190.78 199.16 205.72 212.47 219.02 225.88 240.70

6-1/2

104

212.27 219.02 226.13 233.05 240.16 255.72

112

239.79 249.35 259.22 271.99

DIMENSIONS F G H J R LOCK SCREW ROUND CLAMP ROUND END CLAMP

2-9/16 3-1/16 3/8 3/8 3/16 3/16 1-1/8 1-3/8 1-33/64 1-49/64 LS-3 LS-3 RC-03 RC-03 RK-03 RK-03 RK-14 RK-14

3-7/16 7/16 7/32 1-35/64 1-15/16 LS-4 RC-04 RK-04 RK-15

3-11/16 7/16 7/32 1-43/64 2-1/16 LS-4 RC-04 RK-04 RK-15

3-15/16 7/16 7/32 1-51/64 2-3/16 LS-4 RC-04 RK-04 RK-15

4-1/16 7/16 7/32 1-55/64 2-1/4 LS-4 RC-04 RK-04 RK-15

4-3/16 7/16 7/32 1-59/64 2-5/16 LS-4 RC-04 RK-04 RK-15

4-9/16 7/16 7/32 2-7/64 2-1/2 LS-4 RC-04 RK-04 RK-16

4-13/16 1/2 1/4 2-15/64 2-5/8 LS-5 RC-05 RK-05 RK-17

5-1/16 1/2 1/4 2-23/64 2-3/4 LS-5 RC-05 RK-05 RK-17

5-3/16 1/2 1/4 2-27/64 2-13/16 LS-5 RC-05 RK-05 RK-17

5-5/16 1/2 1/4 2-31/64 2-7/8 LS-5 RC-05 RK-05 RK-17

5-9/16 1/2 1/4 2-39/64 3 LS-5 RC-05 RK-05 RK-17

5-13/16 1/2 1/4 2-47/64 3-1/8 LS-5 RC-05 RK-05 RK-17

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -3 Net 1.00

4 -6 8% .92

7 -12 18% .82

13 -24 25% .75

25 -49 30% .70

50 Up 33% .67

MANUFACTURING CO. 26BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

SLIP/FIXED RENEWABLE CARBIDE SFC

SLIP/FIXED RENEWABLE ID RANGE

.0520-.0934 #55-#43 1.35-2.35mm .0935-.1562 #42-5/32 2.40-3.90mm

5/16 .3125-.3123

.1406-.1889 9/64-3/16 3.60-4.75mm 1/2 .5000-.4998 .1890-.3438 #12-11/32 4.80-8.70mm

.2812-.5312 9/32-17/32 7.20-13.00mm

3/4 .7500-.7498

.4688-.7812 15/32-25/32 12.00-19.50mm

1 1.0000-.9998

.7188-1.0312 1-3/8 23/32 - 1-1/32 1.3750-1.3747 18.50-27.00mm

.9688-1.4062 31/32 - 1-13/32 25.00-35.00mm

1-3/4 1.7500-1.7497

1.3438-1.7812 2-1/4 1-11/32 - 1-25/32 2.2500-2.2496 35.00-45.00mm

LENGTH

5/16 1/2 3/4 1 5/16 1/2 3/4 1 5/16 1/2 3/4 1 1-3/8 5/16 1/2 3/4 1 1-3/8 1/2 3/4 1 1-3/8 1/2 3/4 1 1-3/8 1-3/4 3/4 1 1-3/8 1-3/4 2-1/8 2-1/2 1 1-3/8 1-3/4 2-1/8 2-1/2 3 1 1-3/8 1-3/4 2-1/8 2-1/2 3

ANSI PART NO.

SLIP RENEWABLE PRICE 1-5

SFC-20-5 SFC-20-8 Contact Factory SFC-20-12 SFC-20-16 SFC-20-5 SFC-20-8 Contact Factory SFC-20-12 SFC-20-16 SFC-32-5 SFC-32-8 Contact SFC-32-12 Factory SFC-32-16 SFC-32-22 SFC-32-5 SFC-32-8 Contact SFC-32-12 Factory SFC-32-16 SFC-32-22 SFC-48-8 SFC-48-12 Contact Factory SFC-48-16 SFC-48-22 SFC-64-8 SFC-64-12 Contact SFC-64-16 Factory SFC-64-22 SFC-64-28 SFC-88-12 SFC-88-16 SFC-88-22 Contact Factory SFC-88-28 SFC-88-34 SFC-88-40 SFC-112-16 SFC-112-22 SFC-112-28 Contact SFC-112-34 Factory SFC-112-40 SFC-112-48 SFC-144-16 SFC-144-22 SFC-144-28 Contact SFC-144-34 Factory SFC-144-40 SFC-144-48

LOCK SCREW

LS-1 RC-01 RK-01 RK-10

LS-1 RC-01 RK-01 RK-10 LS-2 RC-02 RK-02 RK-12

LS-2 RC-02 RK-02 RK-12

LS-3 RC-03 RK-03 RK-14

ANSI PART NO.

SC-20-5 SC-20-8 SC-20-12 SC-20-16 SC-20-5 SC-20-8 SC-20-12 SC-20-16 SC-32-5 SC-32-8 SC-32-12 SC-32-16 SC-32-22 SC-32-5 SC-32-8 SC-32-12 SC-32-16 SC-32-22 SC-48-8 SC-48-12 SC-48-16 SC-48-22 SC-64-8 SC-64-12 SC-64-16 SC-64-22 SC-64-28 SC-88-12 SC-88-16 SC-88-22 SC-88-28 SC-88-34 SC-88-40 SC-112-16 SC-112-22 SC-112-28 SC-112-34 SC-112-40 SC-112-48 SC-144-16 SC-144-22 SC-144-28 SC-144-34 SC-144-40 SC-144-48

SFC FC

FIXED RENEWABLE

PRICE 1-5

Contact Factory

ANSI PART NO.

FC-20-5 FC-20-8 FC-20-12 FC-20-16 FC-20-5 FC-20-8 FC-20-12 FC-20-16 FC-32-5 FC-32-8 FC-32-12 FC-32-16 FC-32-22 FC-32-5 FC-32-8 FC-32-12 FC-32-16 FC-32-22 FC-48-8 FC-48-12 FC-48-16 FC-48-22 FC-64-8 FC-64-12 FC-64-16 FC-64-22 FC-64-28 FC-88-12 FC-88-16 FC-88-22 FC-88-28 FC-88-34 FC-88-40 FC-112-16 FC-112-22 FC-112-28 FC-112-34 FC-112-40 FC-112-48 FC-144-16 FC-144-22 FC-144-28 FC-144-34 FC-144-40 FC-144-48

PRICE 1-5

Contact Factory

Note: Due to manufacturing requirements, head dimensions of some carbide bushings may differ slightly from ANSI standards. Most carbide bushings have steel heads.

MANUFACTURING CO. 27BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/03)

SFM ID RANGE (G6)

SLIP/FIXED RENEWABLE METRIC

OD (h5)

.35-1.00mm 1.01-1.80mm

8mm 8.000-7.994mm

1.81-4.00mm 4.01-6.00mm

10mm 10.000-9.994mm

6.01-8.00mm

12mm 12.000-11.992mm

15mm 8.01-10.00mm 15.000-14.992mm

10.01-12.00mm

18mm 18.000-17.992mm

12.01-15.00mm

22mm 22.000-21.991mm

15.01-18.00mm

26mm 26.000-25.991mm

30mm 18.01-22.00mm 30.000-29.991mm 35mm 22.01-26.00mm 35.000-34.989mm 26.01-30.00mm

42mm 42.000-41.989mm

48mm 30.01-35.00mm 48.000-47.989mm 55mm 35.01-42.00mm 55.000-54.987mm 42.01-48.00mm

62mm 62.000-61.987mm

LENGTH

ANSI PRICE LOCK PART NO. 1-5 SCREW

*10mm *16mm 10mm 16mm 10mm 16mm 12mm 20mm 25mm 12mm 20mm 25mm 16mm 28mm 36mm 16mm 28mm 36mm 20mm 36mm 45mm 20mm 36mm 45mm 25mm 45mm 56mm 25mm 45mm 56mm 30mm 56mm 67mm 30mm 56mm 67mm 30mm 56mm 67mm 35mm 67mm 78mm

SFM-8-10 SFM-8-16 SFM-8-10 SFM-8-16 SFM-8-10 SFM-8-16 SFM-10-12 SFM-10-20 SFM-10-25 SFM-12-12 SFM-12-20 SFM-12-25 SFM-15-16 SFM-15-28 SFM-15-36 SFM-18-16 SFM-18-28 SFM-18-36 SFM-22-20 SFM-22-36 SFM-22-45 SFM-26-20 SFM-26-36 SFM-26-45 SFM-30-25 SFM-30-45 SFM-30-56 SFM-35-25 SFM-35-45 SFM-35-56 SFM-42-30 SFM-42-56 SFM-42-67 SFM-48-30 SFM-48-56 SFM-48-67 SFM-55-30 SFM-55-56 SFM-55-67 SFM-62-35 SFM-62-67 SFM-62-78

40.63 52.07 36.14 45.69 13.48 18.94 11.31 12.05 13.69 11.07 12.05 13.69 12.05 13.69 17.25 11.68 12.49 17.62 15.24 18.45 18.45 15.24 17.99 20.00 23.58 29.32 44.32 23.58 29.32 44.32 30.27 47.76 57.65 44.96 59.93 64.99 42.27 56.00 66.13 73.09 91.52 94.15

ID RANGE (G6)

OD (h5)

LENGTH

ANSI PRICE LOCK PART NO. 1-5 SCREW

35mm SFM-70-35

88.42

70mm 48.01-55.00mm 70.000-69.987mm 67mm SFM-70-67 103.67 LSM-1 LSM-2 RCM-1 RCM-2

LSM-3 LSM-4 RCM-3 RCM-4

78mm 55.01-62.00mm 78.000-77.987mm

62.01-70.00mm

85mm 85.000-84.985mm

70.01-78.00mm

95mm 95.000-94.985mm

105mm 78.01-85.00mm 105.000-104.985mm

78mm 40mm 78mm 105mm 40mm 78mm 105mm 45mm 89mm 112mm 45mm 89mm 112mm

106.42 96.71 118.17 142.33 104.67 LSM-7 132.75 LSM-8 RCM-7 159.54 RCM-8 113.78 150.03 174.65 125.12 157.65 SFM-105-112 184.38 SFM-70-78 SFM-78-40 SFM-78-78 SFM-78-105 SFM-85-40 SFM-85-78 SFM-85-105 SFM-95-45 SFM-95-89 SFM-95-112 SFM-105-45 SFM-105-89

* Small metric drill sizes through .80mm are counterbored 1.00mm diameter, with 3mm drill-bearing length.

LSM-5 LSM-6 RCM-5 RCM-6

LSM-7 LSM-8 RCM-7 RCM-8

We’ve done well, now let’s excel.

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 28BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

FLAT MILLED RENEWABLE

STANDARD ID TOLERANCES: From #80 to 1/4"

+.0001/+.0004

Over 1/4 to 3/4"

+.0001/+.0005

Over 3/4 to1-1/2"

+.0002/+.0006

Over 1-1/2 to 2-3/4" +.0003/+.0007

From .35 to 3mm +.002/+.008mm Over 3 to 6mm +.004/+.012mm Over 6 to 10mm +.005/+.014mm Over 10 to 18mm +.006/+.017mm Over 18 to 30mm +.007/+.020mm Over 30 to 50mm +.009/+.025mm (G6 tolerance)

REAMER ID TOLERANCES: From #60 to 1/4"

+.0005/+.0008

Over 1/4 to 1"

+.0006/+.0010

Over 1" to 1-1/2"

+.0008/+.0012

ID RANGE

BODY OD

5/16

35/64

11/64 11/64

5/8

11/16

1/2

51/64 1/4 1/8 19/64 17/64

3/4

25/32

5/8

3/4

1-3/64

27/64 25/64

7/8

57/64

3/4

1-27/64

19/32 1/2

1-7/64 1-9/64 59/64

3/8 3/16 25/32 11/16 1-19/64 1-21/64 1-7/64

1-3/8 1-51/64

1-3/4 2-19/64 3/8 3/16 2-1/4 2-51/64

FLAT LOCK CLAMP SCREW

FC-01 LS-1 FC-10

FC-02 LS-2 FC-12

7/8 1-41/64 1-33/64 1-25/64

FC-03 FC-14 LS-3 1-1/4 1-1/8 1-57/64 1-49/64 1-41/64 FC-15

For dimensions of larger USA sizes, see page 31 (Extended Range).

LENGTH

.0135-.0291 #80-#70 .35-.70mm .0292-.0519 #69-3/64 .75-1.30mm .0520-.0634 #55-1/16 1.35-1.60mm .0635-.0934 5/16 #52-#43 .3125-.3123 1.65-2.35mm

APPLICATIONS: Replaceable bushing used for extra resistance to rotational forces under harsh conditions. This bushing, generally used with a liner, has a milled locking flat to allow fastening securely with a flat clamp. FM bushings also have a standard recess on the other side to allow using a lockscrew instead.

FM-20-16-.1250 FM-20-16-.1772 FM-20-16-.1250 REAMER FM-20-16-.1250 NCB

FMC-20-16-.1250

.0935-.1249 #42-#31 2.40-3.15mm

.1250-.1935 1/8-#10 3.20-4.90mm

ORDERING EXAMPLES: Standard USA Bushing, inch ID Standard USA Bushing, mm ID (.1772 = 4.50mm) Reamer Tolerance on ID No counterbore on long bushings marked with * (no counterbore is standard on all other bushings) Carbide Bushing

From 1 to 3mm +.006/+.012mm Over 3 to 6mm +.010/+.018mm Over 6 to 10mm +.013/+.022mm Over 10 to 18mm +.016/+.027mm Over 18 to 30mm +.020/+.033mm (F6 tolerance)

*1/4 *5/16 *3/8 *1/2 *3/4 *5/16 *3/8 *1/2 *3/4 *5/16 *3/8 *1/2 *3/4 5/16 *3/8 *1/2 *3/4 *1 5/16 3/8 *1/2 *3/4 *1 *1-3/8 5/16 3/8 1/2 5/8 *3/4 *1 *1-3/8

ANSI PRICE CLAMP PART NO. 1-5

FM-20-4 FM-20-5 FM-20-6 FM-20-8 FM-20-12 FM-20-5 FM-20-6 FM-20-8 FM-20-12 FM-20-5 FM-20-6 FM-20-8 FM-20-12 FM-20-5 FM-20-6 FM-20-8 FM-20-12 FM-20-16 FM-20-5 FM-20-6 FM-20-8 FM-20-12 FM-20-16 FM-20-22 FM-20-5 FM-20-6 FM-20-8 FM-20-10 FM-20-12 FM-20-16 FM-20-22

33.33 33.85 34.46 34.88 44.68 28.86 29.37 30.08 32.83 22.02 22.35 22.72 24.90 13.28 13.59 14.05 15.97 19.54 12.05 12.39 13.08 14.80 17.51 22.27 11.74 12.05 12.58 13.41 14.29 17.17 21.90

FC-01 FC-10 LS-1 RC-01 RK-01 RK-10

* Counterbored, leaving correct drill-bearing length and clearance (see page 6 for bearing length).

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 29BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

FM FLAT MILLED RENEWABLE ID RANGE

LENGTH

.1405-.1889 #28-3/16 3.60-4.75mm 1/2 .5000-.4998

.1890-.3438 #12-11/32 4.80-8.70mm

.2812-.5625 3/4 9/32-9/16 .7500-.7498 7.20-14.00mm

.4688-.7812 1 15/32-25/32 1.0000-.9998 12.00-19.50mm

.7188-1.0625 1-3/8 23/32 – 1-1/16 1.3750-1.3747 18.50-27.00mm

5/16 3/8 1/2 *3/4 *1 *1-3/8 *1-1/2 *1-3/4 5/16 3/8 1/2 3/4 *1 *1-3/8 *1-1/2 *1-3/4 *2-1/8 3/8 1/2 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 *2-1/2 *3 1/2 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3

ANSI PRICE CLAMP PART NO. 1-5

FM-32-5 FM-32-6 FM-32-8 FM-32-12 FM-32-16 FM-32-22 FM-32-24 FM-32-28 FM-32-5 FM-32-6 FM-32-8 FM-32-12 FM-32-16 FM-32-22 FM-32-24 FM-32-28 FM-32-34 FM-48-6 FM-48-8 FM-48-12 FM-48-16 FM-48-22 FM-48-24 FM-48-28 FM-48-34 FM-48-40 FM-48-48 FM-64-8 FM-64-12 FM-64-16 FM-64-22 FM-64-24 FM-64-28 FM-64-34 FM-64-40 FM-64-48 FM-88-12 FM-88-16 FM-88-22 FM-88-24 FM-88-28 FM-88-34 FM-88-40 FM-88-48

10.02 10.34 11.25 11.74 13.41 15.45 16.48 17.88 8.82 9.19 9.51 10.34 11.74 14.05 14.81 16.15 30.08 9.19 9.39 10.02 10.72 14.04 15.13 16.35 18.52 31.60 43.85 11.74 12.05 13.08 14.29 15.45 17.17 20.55 33.64 44.68 17.88 20.23 21.90 23.30 25.16 28.21 38.05 49.48

ID RANGE

.9688-1.4062 1-3/4 31/32 – 1-13/32 1.7500-1.7497 25.00-35.00mm FC-01 FC-10 LS-1 RC-01 RK-01 RK-10

1.3438-1.8750 2-1/4 1-11/32 – 1-7/8 2.2500-2.2496 35.00-47.00mm

ANSI PRICE CLAMP PART NO. 1-5

LENGTH

3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3

FM-112-12 FM-112-16 FM-112-22 FM-112-24 FM-112-28 FM-112-34 FM-112-40 FM-112-48 FM-144-12 FM-144-16 FM-144-22 FM-144-24 FM-144-28 FM-144-34 FM-144-40 FM-144-48

25.99 23.80 25.99 27.72 29.56 33.33 40.99 49.48 35.22 32.12 36.29 36.51 38.24 43.55 48.07 56.76

FC-03 FC-14 FC-15 LS-3 RC-03 RK-03 RK-14 FC-03 FC-14 FC-15 LS-3 RC-03 RK-03 RK-14

* Counterbored, leaving correct drill-bearing length and clearance (see page 6 for bearing length). FC-01 FC-11 LS-1 RC-01 RK-01 RK-11

FC-02 FC-12 LS-2 RC-02 RK-02 RK-12

Cooperation is doing with a smile what you have to do anyway.

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 30BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(12/04)

FLAT MILLED RENEWABLE EXTENDED RANGE (LARGE) ID RANGE

1.0937 1.5000 1.5000 1.7500 2.2500 2.2500 2.6250 2.5000 2.7500 3.0000 3.0000 3.3750 3.3750 3.6250 to to to to to to to to to to to to to to 4.0000 2.6250 2.8750 3.1250 3.2500 3.5000 3.6250 3.7500 4.2500 2.8750 1.5312 2.0312 2.2812 2.5312 2"

2-1/2

2-3/4

3-1/4

3-3/8

3-1/2

3-3/4

4-1/4

4-3/8

4-1/2

4-3/4

2.0000 2.5000 2.7500 3.0000 3.2500 3.3750 3.5000 3.7500 4.0000 4.2500 4.3750 4.5000 4.7500 5.0000 1.9996 2.4996 2.7496 2.9996 3.2496 3.3746 3.4996 3.7496 3.9996 4.2496 4.3746 4.4996 4.7496 4.9996

LENGTH

ANSI NO.

128

160

176

3/4 1 1-1/4 1-1/2 1-3/4 2

12 16 20 24 28 32 34 36 40 44 48 52 56 60 64 68 72 76 80 88 96 104 112

37.36 38.23 40.46 43.86 45.00 48.96 50.41 53.92 55.52 58.49 60.98 65.05 68.16 70.70 72.82 74.89 77.20 79.38 81.27

59.17 61.04 63.60 65.77 68.70 72.34 75.44 76.83 80.11 82.36 84.74 87.04 89.77 91.81 94.20 96.88 99.67 102.76 106.90

68.08 71.37 72.89 79.57 80.17 83.21 85.64 88.14 90.56 93.30 95.77 98.53 100.95 103.71 106.22 108.59 111.33 114.36 118.75

2-1/8 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 4-1/4 4-1/2 4-3/4 5 5-1/2 6 6-1/2 7

240

256

192

208

80.11 82.11 84.84 87.04 89.95 92.93

95.77 81.82 83.94 85.82 87.64 97.85 84.54 86.73 89.22 91.11 87.46 90.31 92.57 94.56 101.42 90.50 94.20 96.39 98.53 104.22 94.21 97.85 99.85 102.41 107.82 97.30 101.85 103.86 106.22 111.33

95.77 99.07 102.76 106.36 110.24 113.99 118.44 123.12 128.09 133.13 138.13 143.58

101.13 104.22 108.78 112.73 117.53 122.02 127.01 131.20 135.75 138.96 144.68 149.42

216

105.72 110.43 114.80 119.47 124.75 130.13 135.75 139.70 143.58 147.17 150.99 154.89 162.72

224

108.36 112.37 116.80 121.72 127.35 132.46 137.94 142.85 147.34 152.27 157.00 162.10 173.33

272

280

288

304

320

98.58 101.50 104.77 107.82 112.61 116.01

101.80 104.95 108.05 111.33 113.51 117.83

106.06 109.33 112.87 115.53 118.80 122.02

110.24 113.45 116.61 119.83 123.12 126.46

116.25 120.44 124.09 128.46 129.11 137.28

119.83 123.84 128.03 132.39 136.97 141.89 147.17 151.60 159.38 165.94 172.38 179.11 192.41 205.72 219.02

122.02 126.46 131.00 135.75 141.04 146.50 152.64 158.65 165.09 171.28 178.33 184.94 198.54 212.47 226.13 239.79

110.43 114.80 119.47 124.09 129.82 135.02 140.49 146.07 151.55 157.18 162.72 168.36 179.30 190.78

115.34 118.93 123.17 127.67 132.29 136.97 142.16 147.78 154.16 160.71 167.03 173.42 186.22 199.16 212.27

126.46 130.65 135.21 140.12 145.17 150.68 156.71 162.90 169.82 176.39 183.79 190.90 204.80 219.02 233.05 249.35

130.65 135.02 139.70 144.31 149.59 154.95 161.07 167.45 174.93 181.04 189.14 196.92 211.12 225.88 240.16 259.22

142.12 146.80 151.55 156.35 161.79 167.94 174.93 181.12 185.12 196.97 204.44 211.37 226.13 240.70 255.72 271.99

4-9/16 7/16 7/32 2-7/64 1-7/8 2-11/16 2-1/2 FC-04 FC-05 FC-16 FC-17 LS-4 RC-04 RK-04 RK-16

4-13/16 5-1/16 5-3/16 5-5/16 1/2 1/2 1/2 1/2 1/4 1/4 1/4 1/4 2-15/64 2-23/64 2-27/64 2-31/64 2 2-1/8 2-3/16 2-1/4 3 3-1/16 2-13/16 2-15/16 2-5/8 2-3/4 2-13/16 2-7/8 FC-06 FC-06 FC-06 FC-06 FC-07 FC-07 FC-07 FC-07 FC-18 FC-20 FC-20 FC-20 FC-19 FC-21 FC-21 FC-21 LS-5 LS-5 LS-5 LS-5 RC-05 RC-05 RC-05 RC-05 RK-05 RK-05 RK-05 RK-05 RK-17 RK-17 RK-17 RK-17

5-9/16 1/2 1/4 2-39/64 2-3/8 3-3/16 3 FC-06 FC-07 FC-20 FC-21 LS-5 RC-05 RK-05 RK-17

5-13/16 1/2 1/4 2-47/64 2-1/2 3-5/16 3-1/8 FC-06 FC-07 FC-20 FC-21 LS-5 RC-05 RK-05 RK-17

25 -49 25% .70

50 Up 33% .67

DIMENSIONS F G H J K N R FLAT CLAMP LOCK SCREW ROUND CLAMP ROUND END CLAMP

2-9/16 3-1/16 3/8 3/8 3/16 3/16 1-1/8 1-3/8 1 1-1/4 1-41/64 1-57/64 1-33/64 1-49/64 FC-03 FC-03 FC-14 FC-14 FC-15 FC-15 LS-3 LS-3 RC-03 RC-03 RK-03 RK-03 RK-14 RK-14

3-7/16 3-11/16 7/16 7/16 7/32 7/32 1-35/64 1-43/64 1-3/8 1-1/2 2-3/16 2-5/16 1-15/16 2-1/16 FC-04 FC-04 FC-05 FC-05 FC-16 FC-16 FC-17 FC-17 LS-4 LS-4 RC-04 RC-04 RK-04 RK-04 RK-15 RK-15

3-15/16 7/16 7/32 1-51/64 1-5/8 2-7/16 2-3/16 FC-04 FC-05 FC-16 FC-17 LS-4 RC-04 RK-04 RK-15

4-1/16 7/16 7/32 1-55/64 1-11/16 2-1/2 2-1/4 FC-04 FC-05 FC-16 FC-17 LS-4 RC-04 RK-04 RK-15

4-3/16 7/16 7/32 1-59/64 1-3/4 2-9/16 2-5/16 FC-04 FC-05 FC-16 FC-17 LS-4 RC-04 RK-04 RK-15

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -3 Net 1.00

4 -6 8% .92

7 -12 18% .82

13 -24 25% .75

MANUFACTURING CO. 31BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

LINER LENGTH

LENGTH

1/2 .5017-.5014 (.520-.515 UNG)

5/16

APPLICATIONS:

9/16 .5642-.5639 (.582-.577 UNG)

Liners are permanent bushings used to hold renewable drill bushings. The liner’s ID has a precise sliding fit with the renewable bushing’s OD. The hardened liner accurately locates the renewable bushing and protects the jig plate from wear caused by frequent bushing replacement. Note: Metric liner bushings are the same as metric press-fit bushings. 3/8

5/8 .6267-.6264 (.645-.640 UNG)

ORDERING EXAMPLES: L-32-16 L-32-16U L-40-16-24 PM-18-25-12.00 metric press-fit type)

Standard USA liner bushing Unground OD Standard USA liner bushing with a choice of ID in that OD size Standard metric liner bushing (same as

7/16

Prices shown here apply to standard bushings only, either ground or unground OD, for a standard ID size. 1/2

STANDARD LINER ID TOLERANCES: 3/16 to 3/8" 7/16 to 5/8" 3/4" 7/8 to 1" 1-3/8" 1-3/4" 2-1/4"

+.0001/+.0004 +.0002/+.0005 +.0003/+.0006 +.0004/+.0007 +.0006/+.0010 +.0008/+.0012 +.0010/+.0015

8 to 10mm +.005/+.014mm 12 to 18mm +.006/+.017mm 22 to 30mm +.007/+.020mm 35 to 48mm +.009/+.025mm 55 to 78mm +.010/+.029mm 85 to 105mm +.012/+.034mm (G6 tolerance)

3/16

5/16 .3141-.3138 (.327-.322 UNG)

1/4

7/16 .4392-.4389 (.453-.448 UNG)

LENGTH

1/4 5/16 3/8 1/2 5/8 3/4 1/4 5/16 3/8 1/2 5/8 3/4

9/16 7/8 .8768-.8765 (.895-.890 UNG)

PRICE ANSI 1-5 PART NO.

L-20-4 L-20-5 L-20-6 L-20-8 L-20-10 L-20-12 L-28-4 L-28-5 L-28-6 L-28-8 L-28-10 L-28-12

6.63 6.95 7.29 7.66 7.98 8.31 5.75 5.93 6.45 6.63 6.63 7.29

3/4 .7518-.7515 (.770-.765 UNG)

5/8

1/4 5/16 3/8 1/2 5/8 3/4 1 1-3/8 1/4 5/16 3/8 1/2 5/8 3/4 1 1/4 5/16 3/8 1/2 5/8 3/4 1 1/4 5/16 3/8 1/2 5/8 3/4 1 5/16 3/8 1/2 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 5/16 3/8 1/2 5/8 3/4 1 1-1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4

ANSI PART NO.

PRICE 1-5

5.75 L-32-4 5.93 L-32-5 6.45 L-32-6 6.63 L-32-8 6.95 L-32-10 7.29 L-32-12 8.49 L-32-16 9.71 L-32-22 6.63 L-36-4 5.75 L-36-5 6.13 L-36-6 6.13 L-36-8 6.45 L-36-10 6.63 L-36-12 6.63 L-36-16 6.63 L-40-4-24 5.75 L-40-5-24 6.13 L-40-6-24 6.13 L-40-8-24 L-40-10-24 6.45 L-40-12-24 6.63 L-40-16-24 6.95 6.63 L-40-4-28 5.75 L-40-5-28 6.13 L-40-6-28 6.13 L-40-8-28 L-40-10-28 6.45 L-40-12-28 6.63 L-40-16-28 6.95 5.93 L-48-5 6.63 L-48-6 6.63 L-48-8 6.95 L-48-12 7.66 L-48-16 9.71 L-48-22 10.34 L-48-24 11.25 L-48-28 13.28 L-48-34 8.69 L-56-5-36 9.01 L-56-6-36 7.98 L-56-8-36 L-56-10-36 8.31 L-56-12-36 8.31 L-56-16-36 8.69 L-56-20-36 9.51 8.69 L-56-5-40 9.01 L-56-6-40 7.98 L-56-8-40 L-56-10-40 8.31 L-56-12-40 8.31 L-56-16-40 8.69 L-56-20-40 9.51

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 32BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

LINER ID

3/4

LENGTH

ANSI PART NO.

PRICE 1-5

1/2 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 1/2 5/8 3/4 1 1-1/4 1-1/2 1/2 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3

L-64-8 L-64-12 L-64-16 L-64-22 L-64-24 L-64-28 L-64-34 L-64-40 L-64-48 L-80-8 L-80-10 L-80-12 L-80-16 L-80-20 L-80-24 L-88-8 L-88-12 L-88-16 L-88-22 L-88-24 L-88-28 L-88-34 L-88-40 L-88-48 L-112-12 L-112-16 L-112-22 L-112-24 L-112-28 L-112-34 L-112-40 L-112-48 L-144-12 L-144-16 L-144-22 L-144-24 L-144-28 L-144-34 L-144-40 L-144-48 L-176-12 L-176-16 L-176-22 L-176-24 L-176-28 L-176-34 L-176-40 L-176-48

8.30 8.30 8.82 9.51 10.72 11.74 13.08 15.13 25.28 12.77 12.05 10.87 12.77 14.29 15.45 13.08 10.87 13.08 14.44 15.83 17.17 19.92 22.27 30.77 16.35 14.44 16.35 17.51 18.52 21.58 23.04 35.48 20.74 18.70 20.74 21.77 22.78 26.37 28.86 41.30 22.93 20.74 23.10 24.45 25.85 28.21 31.47 43.15

1 1.0018-1.0015 (1.020-1.015 UNG)

7/8

1-1/4 1.2520-1.2517 (1.270-1.265 UNG)

1-3/8 1.3772-1.3768 (1.395-1.390 UNG)

1-3/8

1-3/4 1.7523-1.7519 (1.770-1.765 UNG)

1-3/4

2-1/4 2.2525-2.2521 (2.270-2.265 UNG)

2-1/4

2-3/4 2.7526-2.7522 (2.770-2.765 UNG)

Alignment Pins Offer Strength and Precision Our wide variety of precision alignment pins includes ball-lock pins, detent pins, expanding pins and lifting pins. Choose just the right pin for every job. Send for a free catalog, or view our web site, www.carrlane.com. We also have a wide assortment of tooling components, clamps, modular fixturing and much more.

L Pin

Shoulder Pin

T Pin

Clamping Pin

Jig Pin

Ball Lock Pin

Marine Pin

Lifting Pin

Locating Pin

Detent Pin

Locking Pin

Expanding Pin

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 33BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(6/05)

LINER EXTENDED RANGE (LARGE)

L ID

3-1/4 3-3/8 3-1/2 3-3/4 3" 2" 2-1/2 2-3/4 4" 4-1/4 4-3/8 4-1/2 4-3/4 5" 2.0015 2.5015 2.7515 3.0015 3.2515 3.3765 3.5015 3.7515 4.0015 4.2515 4.3765 4.5015 4.7515 5.0015 2.0010 2.5010 2.7510 3.0010 3.2510 3.3760 3.5010 3.7510 4.0010 4.2510 4.3760 4.5010 4.7510 5.0010 2-1/2

3-3/8

3-5/8

3-7/8

4-1/8

4-1/2

4-3/4

5-1/8

5-1/4

5-1/2

5-3/4

2.5025 3.0028 3.3778 3.6278 3.8778 4.0028 4.1280 4.5030 4.7530 5.0030 5.1280 5.2530 5.5030 5.7530 2.5021 3.0023 3.3773 3.6273 3.8773 4.0023 4.1275 4.5025 4.7525 5.0025 5.1275 5.2525 5.5025 5.7525 368

304

320

328

336

352

68.44 71.80

75.44

77.25

79.81

83.46

86.73 92.37

68.88

70.83 72.15

77.45

79.44

82.66

86.38

89.83 95.47

70.09

71.72

74.10 75.25

80.11

82.36

85.28

88.73

92.50 98.76

69.42

72.67

74.70

77.25 78.54

82.84

85.28

87.76

91.38

95.29 102.34

65.35

72.15

75.25

78.29

80.47 81.82

85.95

88.38

90.56

95.55

97.60 105.81

55.76

66.81

74.34

77.80

81.45

81.57 85.45

88.38

91.96

93.90

96.88 100.40 109.63

31.83

57.52

68.32

33.52

59.17

70.28

77.20

81.27

85.28

86.81 89.10

91.96

95.23

96.88 100.40 104.22 113.99

2-1/2

35.28

61.59

72.33

79.44

83.82

88.38

90.56 92.69

95.29

98.39 100.40 104.22 107.44 117.89

2-3/4

43.31

64.31

74.64

82.66

87.76

92.37

94.58 95.97

98.76 101.85 104.52 108.36 111.52 121.72

48.42

67.06

76.83

85.64

91.11

95.97

98.76 100.22 102.34 105.68 108.36 111.89 115.53 125.49

3-1/4

52.48

68.88

78.85

88.73

95.23 100.58 103.14 104.71 106.36 109.63 112.78 116.26 120.02 130.11

3-1/2

53.92

71.61

81.27

92.01

98.76 105.15 107.68 108.97 110.24 113.45 117.34 120.93 124.45 135.21

3-3/4

55.58

73.38

83.28

95.77 102.76 109.63 112.05 113.99 114.91 118.07 122.58 126.04 129.37 141.04

57.57

75.44

86.68

99.67 106.41 113.35 116.01 118.62 119.35 122.74 127.67 131.20 134.84 146.80

4-1/4

59.40

77.62

87.64 104.05 110.24 116.26 119.90 123.12 124.45 128.55 132.66 137.74 141.04 153.74

4-1/2

61.59

80.47

89.83 108.41 113.99 119.52 127.47 127.73 129.91 133.75 138.29 142.80 147.17 159.81

4-3/4

63.60

83.21

92.93 112.05 117.89 122.74 128.03 132.46 135.21 139.03 141.59 148.14 153.24 165.94

65.05

86.73

95.84 116.43 121.36 126.04 132.46 137.03 140.85 145.03 149.59 154.70 159.38 171.96

5-1/2

139.75 144.68 146.80 151.55 156.09 161.27 166.18 171.53 184.22

155.97 162.10 167.03 172.55 178.38 184.22 192.16

6-1/2

104

173.11 170.13 184.22 190.23 195.51 208.45

112

195.46 203.54 211.67 222.48

LENGTH

ANSI NO.

160

192

216

232

248

256

3/4

22.96

49.20

59.17

63.60

64.86

66.27

23.33

49.63

60.79

65.35

67.54

1-1/4

25.81

51.20

61.59

67.42

1-1/2

27.87

52.48

63.41

1-3/4

29.53

54.24

30.79

2-1/8

2-1/4

264

288

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -3 Net 1.00

4 -6 8% .92

7 -12 18% .82

13 -24 25% .75

25 -49 30% .70

50 Up 33% .67

MANUFACTURING CO. 34BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

LINER METRIC OD (s6)

ID (G6)

LENGTH

8mm

10mm 12mm 12.039-12.028mm 16mm

10mm

12mm

15mm

18mm

22mm

26mm

30mm

35mm

42mm

48mm

55mm

62mm

ANSI PART NO.

PRICE 1-5

ID (G6)

PM OD (s6)

ANSI PART NO.

LENGTH

PRICE 1-5

PM-12-10-8.00

7.52

35mm

PM-85-35-70.00

74.01

PM-12-16-8.00

7.73

85mm 67mm 85.093-85.071mm

PM-85-67-70.00

86.86

12mm

PM-15-12-10.00

7.15

78mm

PM-85-78-70.00

89.27

15mm 20mm 15.039-15.028mm

PM-15-20-10.00

7.73

40mm

PM-95-40-78.00

80.92

25mm

PM-15-25-10.00

8.10

PM-95-78-78.00

100.29

12mm

95mm 78mm 95.093-95.071mm

PM-18-12-12.00

7.73

105mm PM-95-105-78.00

18mm 20mm 18.039-18.028mm

PM-18-20-12.00

8.10

40mm

PM-105-40-85.00

85.04

25mm

PM-18-25-12.00

8.92

105mm 78mm 105.101-105.079mm

PM-105-78-85.00

105.21

16mm

PM-22-16-15.00

9.68

22mm 28mm 22.048-22.035mm

PM-22-28-15.00

10.12

45mm

PM-115-45-95.00

93.87

115mm 89mm 95mm 115.101-115.079mm

PM-115-89-95.00

120.87

36mm

PM-22-36-15.00

12.05

16mm

PM-26-16-18.00

9.68

26mm 28mm 26.048-26.035mm

PM-26-28-18.00

36mm 20mm

70mm

78mm

85mm

105mm PM-105-105-85.00

122.69

128.16

112mm PM-115-112-95.00

142.26

10.27

45mm

PM-125-45-105.00

105.81

PM-26-36-18.00

12.49

PM-125-89-105.00

134.85

PM-30-20-22.00

9.68

125mm 89mm 105mm 125.117-125.092mm

30mm 36mm 30.048-30.035mm

PM-30-36-22.00

12.49

45mm

PM-30-45-22.00

13.68

20mm

PM-35-20-26.00

12.66

35mm 36mm 35.059-35.043mm

PM-35-36-26.00

18.45

45mm

PM-35-45-26.00

20.00

25mm

PM-42-25-30.00

16.82

42mm 45mm 42.059-42.043mm

PM-42-45-30.00

21.58

56mm

PM-42-56-30.00

26.77

25mm

PM-48-25-35.00

16.82

48mm 45mm 48.059-48.043mm

PM-48-45-35.00

21.58

56mm

PM-48-56-35.00

26.77

30mm

PM-55-30-42.00

24.16

55mm 55.072-55.053mm 56mm

PM-55-56-42.00

33.68

67mm

PM-55-67-42.00

48.12

30mm

PM-62-30-48.00

38.06

PM-62-56-48.00

49.39

67mm

PM-62-67-48.00

57.29

30mm

PM-70-30-55.00

47.51

PM-70-56-55.00

57.49

67mm

PM-70-67-55.00

67.16

35mm

PM-78-35-62.00

58.30

PM-78-67-62.00

76.93

PM-78-78-62.00

79.70

62mm 62.072-62.053mm 56mm 70mm 70.078-70.059mm 56mm 78mm 78.078-78.059mm 67mm 78mm

112mm PM-125-112-105.00 159.14

Note: Metric liner bushings are the same as metric press-fit bushings.

Be the job Great or small Do it right Or not at all.

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 35BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

HEAD LINER

LENGTH

5/16

1/2 .5017-.5014 (.520-.515 UNG)

1/2

3/4 .7518-.7515 (.770-.765 UNG)

LENGTH

ANSI PART NO.

PRICE 1-5

5/16 3/8 1/2 3/4 1 1-3/8 5/16 3/8 1/2 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 1/2 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 1/2 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3 3/4 1 1-3/8 1-1/2 1-3/4 2-1/8 2-1/2 3

HL-32-5 HL-32-6 HL-32-8 HL-32-12 HL-32-16 HL-32-22 HL-48-5 HL-48-6 HL-48-8 HL-48-12 HL-48-16 HL-48-22 HL-48-24 HL-48-28 HL-48-34 HL-64-8 HL-64-12 HL-64-16 HL-64-22 HL-64-24 HL-64-28 HL-64-34 HL-64-40 HL-64-48 HL-88-8 HL-88-12 HL-88-16 HL-88-22 HL-88-24 HL-88-28 HL-88-34 HL-88-40 HL-88-48 HL-112-12 HL-112-16 HL-112-22 HL-112-24 HL-112-28 HL-112-34 HL-112-40 HL-112-48 HL-144-12 HL-144-16 HL-144-22 HL-144-24 HL-144-28 HL-144-34 HL-144-40 HL-144-48 HL-176-12 HL-176-16 HL-176-22 HL-176-24 HL-176-28 HL-176-34 HL-176-40 HL-176-48

7.66 8.30 8.30 9.00 11.74 14.44 7.98 8.30 8.30 9.00 10.34 12.05 13.07 14.05 16.35 10.02 10.72 11.36 12.05 13.41 15.13 15.78 18.78 29.04 13.59 12.05 13.59 14.81 15.83 17.17 19.34 22.27 38.94 16.67 17.51 19.22 20.37 21.58 24.66 27.72 44.88 23.80 21.90 24.13 25.16 26.50 29.24 32.94 48.28 28.86 26.18 29.24 30.77 32.63 35.74 39.77 54.06

USA

METRIC

BODY OD

F DIA

1/2 3/4 1 1-3/8 1-3/4 2-1/4 2-3/4

5/8 7/8 1-1/8 1-1/2 1-7/8 2-3/8 2-7/8

3/32 3/32 1/8 1/8 3/16 3/16 3/16

For dimensions of larger USA sizes, see page 37 (Extended Range).

BODY OD

F DIA

12mm 15mm 18mm 22mm 26mm 30mm 35mm 42mm 48mm 55mm 62mm 70mm 78mm 85mm 95mm 105mm 115mm 125mm

15mm 18mm 22mm 26mm 30mm 34mm 39mm 46mm 52mm 59mm 66mm 74mm 82mm 90mm 100mm 110mm 120mm 130mm

3mm 3mm 4mm 4mm 4mm 5mm 5mm 5mm 5mm 5mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm 6mm

3/4

1 1.0018-1.0015 (1.020-1.015 UNG)

1-3/8 1.3772-1.3768 (1.395-1.390 UNG)

1-3/8

1-3/4 1.7523-1.7519 (1.770-1.765 UNG)

1-3/4

2-1/4 2.2525-2.2521 (2.270-2.265 UNG)

APPLICATIONS: Similar to an L bushing, but with a head to resist heavy axial loads. Head liners are permanent bushings used to hold renewable drill bushings. The head liner’s ID has a precise sliding fit with the renewable bushing’s OD. The hardened head liner accurately locates the renewable bushing and protects the jig plate from wear caused by frequent bushing replacement. Note: The “length” listed for a head liner refers to its overall length, not its length under the head. Metric head-liner bushings are the same as metric head-press-fit bushings.

ORDERING EXAMPLES: HL-32-16 HL-32-16U HM-18-25-12.00

Standard USA liner bushing Unground OD Standard metric liner bushing (same as metric press-fit type) Prices shown here apply to standard bushings only, either ground or unground OD, for a standard ID size.

2-1/4

2-3/4 2.7526-2.7522 (2.770-2.765 UNG)

STANDARD LINER ID TOLERANCES: 5/16" 1/2" 3/4" 1" 1-3/8" 1-3/4" 2-1/4"

+.0001/+.0004 +.0002/+.0005 +.0003/+.0006 +.0004/+.0007 +.0006/+.0010 +.0008/+.0012 +.0010/+.0015

8 to 10mm +.005/+.014mm 12 to 18mm +.006/+.017mm 22 to 30mm +.007/+.020mm 35 to 48mm +.009/+.025mm 55 to 78mm +.010/+.029mm 85 to 105mm +.012/+.034mm (G6 tolerance)

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 36BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

HEAD LINER EXTENDED RANGE (LARGE) ID

3-1/4 3-3/8 3-1/2 3-3/4 3" 2-1/2 2-3/4 2" 4" 4-1/4 4-3/8 4-1/2 4-3/4 5" 2.0015 2.5015 2.7515 3.0015 3.2515 3.3765 3.5015 3.7515 4.0015 4.2515 4.3765 4.5015 4.7515 5.0015 2.0010 2.5010 2.7510 3.0010 3.2510 3.3760 3.5010 3.7510 4.0010 4.2510 4.3760 4.5010 4.7510 5.0010 2-1/2

LENGTH

ANSI NO.

3/4

3-3/8

3-5/8

3-7/8

4-1/8

4-1/2

4-3/4

5-1/8

5-1/4

5-1/2

5-3/4

2.5025 3.0028 3.3778 3.6278 3.8778 4.0028 4.1280 4.5030 4.7530 5.0030 5.1280 5.2530 5.5030 5.7530 2.5021 3.0023 3.3773 3.6273 3.8773 4.0023 4.1275 4.5025 4.7525 5.0025 5.1275 5.2525 5.5025 5.7525 160 26.91

192 51.20

216 61.59

232 65.04

248 66.86

256 68.08

264

288

70.34 71.61

304 77.62

320 79.38

352

328

336

81.82

85.64 89.22

368 99.28

27.35

52.05

63.41

67.06

68.88

70.64

73.01 74.34

79.44

81.57

84.51

88.31 92.21 101.44

1-1/4

30.18

54.30

64.14

68.88

71.64

73.55

76.16 77.25

82.36

84.37

87.46

91.11 94.68 102.80

1-1/2

32.26

55.58

65.35

71.43

74.34

77.20

77.45 80.72

85.28

87.04

90.37

93.67 97.48 104.95

1-3/4

34.02

56.48

67.06

73.92

77.25

80.11

81.82 83.82

88.12

90.50

92.93

96.57 100.34 108.78

35.65

59.99

68.45

76.29

79.93

83.46

85.95 87.64

90.91

93.30

95.77

99.61 102.90 112.78

2-1/8

37.17

61.04

70.20

2-1/4

39.50

62.43

72.28

78.85

83.28

87.04

89.95 91.29

94.39

97.60

99.61 102.90 106.71 116.55

2-1/2

41.30

65.04

74.34

81.57

86.38

90.91

93.30 95.23

97.48 100.95 102.90 106.71 110.43 120.81

2-3/4

45.92

66.97

76.70

84.49

89.95

94.56

96.93 98.76

101.44 104.71 106.95 110.97 114.56 124.83

48.93

69.29

78.85

87.76

93.30

98.76 102.41 102.76 104.95 108.36 111.09 114.91 119.50 128.76

3-1/4

61.59

71.43

81.21

91.11

97.30 102.96 105.62 107.32 108.97 112.05 115.65 119.47 123.12 133.56

3-1/2

63.05

73.38

83.28

94.39 101.44 107.99 110.24 111.89 112.91 116.26 120.44 124.09 127.73 138.61

3-3/4

64.81

75.20

85.45

98.22 105.68 112.78 115.34 116.55 117.83 121.12 125.49 129.19 133.13 144.68

66.81

77.25

87.64 102.04 109.45 115.89 118.26 121.36 122.08 126.04 130.65 134.59 138.48 150.14

4-1/4

68.63

79.46

89.85 106.41 112.91 119.47 124.38 126.09 127.73 131.73 136.43 140.73 144.68 157.56

4-1/2

70.70

80.49

92.21 110.97 116.61 122.63 127.49 131.20 133.38 137.03 141.70 147.71 150.99 163.82

4-3/4

72.34

84.49

94.56 115.34 120.81 125.73 130.65 136.23 138.61 143.63 147.71 152.14 157.00 170.12

74.34

88.31

98.20 119.52 124.75 129.19 134.05 140.85 144.13 148.44 153.60 158.65 163.75 176.39

5-1/2

136.23 140.85 150.14 155.42 159.98 165.39 170.67 174.34 188.89

159.98 166.18 171.41 177.29 182.94 188.89 201.46

6-1/2

104

177.78 182.94 188.89 194.91 200.92 214.03

112

200.61 208.82 216.28 228.50

DIMENSIONS F G

2-5/8 3/16

3-1/8 3/16

3-1/2 3/16

3-7/8 3/16

4-1/8 3/16

4-1/4 3/16

4-3/8 3/16

4-3/4 7/32

5 7/32

5-1/4 7/32

5-3/8 7/32

5-1/2 7/32

5-3/4 7/32

6 7/32

25 -49 30% .70

50 Up 33% .67

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -3 Net 1.00

4 -6 8% .92

7 -12 18% .82

13 -24 25% .75

MANUFACTURING CO. 37BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

HEAD LINER METRIC

HM ID (G6)

OD (s6)

8mm

12mm 12.039-12.028mm

10mm

12mm

15mm

18mm

22mm

26mm

30mm

35mm

42mm

48mm

55mm

62mm

LENGTH

15mm 15.039-15.028mm 18mm 18.039-18.028mm 22mm 22.048-22.035mm 26mm 26.048-26.035mm 30mm 30.048-30.035mm 35mm 35.059-35.043mm 42mm 42.059-42.043mm 48mm 48.059-48.043mm 55mm 55.072-55.053mm 62mm 62.072-62.053mm 70mm 70.078-70.059mm 78mm 78.078-78.059mm

ANSI PART NO.

PRICE 1-5

ID (G6)

OD (s6)

ANSI PART NO.

LENGTH

PRICE 1-5

10mm

HM-12-10-8.00

9.89

16mm

HM-12-16-8.00

10.50

12mm

HM-15-12-10.00

8.93

78mm

HM-85-78-70.00

20mm

HM-15-20-10.00

10.50

40mm

HM-95-40-78.00

89.41

25mm

HM-15-25-10.00

10.50

115.74

12mm

95mm 78mm HM-95-78-78.00 95.093-95.071mm

HM-18-12-12.00

9.68

20mm

HM-18-20-12.00

10.50

25mm

HM-18-25-12.00

12.34

16mm

HM-22-16-15.00

11.91

105mm HM-105-105-85.00

148.20

28mm

HM-22-28-15.00

13.69

45mm

HM-115-45-95.00

108.45

115mm 89mm HM-115-89-95.00 95mm 115.101-115.079mm

139.43

HM-85-35-70.00

83.62

85mm 67mm HM-85-67-70.00 85.093-85.071mm

105.81

35mm

70mm

78mm

105mm HM-95-105-78.00

110.75

142.13

HM-105-40-85.00

98.13

105mm 78mm HM-105-78-85.00 85mm 105.101-105.079mm

121.68

40mm

36mm

HM-22-36-15.00

15.24

16mm

HM-26-16-18.00

12.05

112mm HM-115-112-95.00

164.60

28mm

HM-26-28-18.00

13.10

45mm

HM-125-45-105.00

122.43

125mm 89mm HM-125-89-105.00 105mm 125.117-125.092mm

156.42

36mm

HM-26-36-18.00

16.37

20mm

HM-30-20-22.00

17.62

36mm

HM-30-36-22.00

23.22

45mm

HM-30-45-22.00

24.76

20mm

HM-35-20-26.00

17.99

36mm

HM-35-36-26.00

23.58

45mm

HM-35-45-26.00

25.14

25mm

HM-42-25-30.00

23.95

45mm

HM-42-45-30.00

28.92

56mm

HM-42-56-30.00

36.45

25mm

HM-48-25-35.00

23.95

45mm

HM-48-45-35.00

28.92

56mm

HM-48-56-35.00

36.45

30mm

HM-55-30-42.00

34.30

56mm

HM-55-56-42.00

46.71

67mm

HM-55-67-42.00

59.21

30mm

HM-62-30-48.00

39.61

56mm

HM-62-56-48.00

51.37

67mm

HM-62-67-48.00

58.94

30mm

HM-70-30-55.00

56.02

56mm

HM-70-56-55.00

64.58

67mm

HM-70-67-55.00

69.44

35mm

HM-78-35-62.00

62.36

67mm

HM-78-67-62.00

74.51

78mm

HM-78-78-62.00

78.99

112mm HM-125-112-105.00 184.38 Note: Metric head-liner bushings are the same as metric headpress-fit bushings.

It is not a tragedy to have only one talent; the tragedy is in not using it.

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 38BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

UN-A-LOK® LINER USA ID

3/16

.3141-.3138 (.327-.322 UNG)

5/16

.5017-.5014 (.520-.515 UNG)

1/2

.7518-.7515 (.770-.765 UNG)

3/4

1.0018-1.0015 (1.020-1.015 UNG)

1.3772-1.3768 (1.395-1.390 UNG)

LENGTH

PART NO.

PRICE 1-5

5/16 3/8 1/2 3/4 3/8 1/2 3/4 1/2 3/4 1 1/2 3/4 1 1/2 3/4 1 1-3/8

UL-20-5 UL-20-6 UL-20-8 UL-20-12 UL-32-6 UL-32-8 UL-32-12 UL-48-8 UL-48-12 UL-48-16 UL-64-8 UL-64-12 UL-64-16 UL-88-8 UL-88-12 UL-88-16 UL-88-22

18.31 19.00 19.36 20.13 13.36 13.85 15.51 14.69 16.83 18.31 23.56 25.08 32.01 28.53 32.84 39.76 43.38

5/16

1/2

USA BODY OD

5/16 1/2 3/4 1 1-3/8

METRIC

F DIA

1/4 .365 3/8 9/16 1/2 13/16 21/32 1-1/16 7/8 1-7/16

3/32 3/32 3/32 1/8 1/8

BODY OD

F DIA

12mm 9.5mm 15mm 15mm 11mm 18mm 18mm 13mm 22mm 22mm 15.5mm 26mm 26mm 17.5mm 30mm

3mm 3mm 4mm 4mm 4mm

1-3/8

METRIC

APPLICATIONS:

ID (G6)

Similar to an HL head liner, but incorporating a special locking tab that eliminates the need for a lockscrew. Un-A-Lok ® liners are permanent bushings used to hold SF renewable drill bushings (on the “slip” side only, not the “fixed” side). Although slightly more expensive than a head liner plus a lockscrew, installation time is dramatically reduced. Patent no. 3,015,242 and 3,099,079.

8mm 10mm 12mm 15mm

ORDERING EXAMPLES: UL-20-5 UL-20-5U ULM-12-10

3/4

Standard USA liner bushing Unground OD Standard metric liner bushing

18mm

OD (s6)

10mm 12mm 12.039-12.028mm 16mm 12mm 15mm 20mm 15.039-15.028mm 25mm 12mm 18mm 20mm 18.039-18.028mm 25mm 16mm 22mm 28mm 22.048-22.035mm 36mm 16mm 26mm 28mm 26.048-26.035mm 36mm

MILLED SLOT FOR LOCK TAB CLEARANCE

+.0001/+.0004 +.0002/+.0005 +.0003/+.0006 +.0004/+.0007

8 to 10mm +.005/+.014mm 12 to 18mm +.006/+.017mm (G6 tolerance)

Quantity Discount % Multiplier

ULM-12-10-8.00 ULM-12-16-8.00 ULM-15-12-10.00 ULM-15-20-10.00 ULM-15-25-10.00 ULM-18-12-12.00 ULM-18-20-12.00 ULM-18-25-12.00 ULM-22-16-15.00 ULM-22-28-15.00 ULM-22-36-15.00 ULM-26-16-18.00 ULM-26-28-18.00 ULM-26-36-18.00

Contact Factory Contact Factory Contact Factory Contact Factory Contact Factory

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

UN-A-LOK® INSTALLATION TOOL

! NEW

RAM OF ARBOR PRESS

CL-1-ULT $11.22 STEPPED SHOULDERS MATE WITH UN-A-LOK HEAD

PRICE 1-5

PART NO.

QUANTITY DISCOUNTS

STANDARD LINER ID TOLERANCES: 3/16 to 5/16" 1/2" 3/4" 1"

LENGTH

LOCK TAB CLEARANCE SLOT JIG PLATE

UN-A-LOK INSERTING TOOL UN-A-LOK PRESS FIT LINER

PILOT END WITH STEPPED OD’S TO FIT ALL UN-A-LOK ID’S

MANUFACTURING CO. 39BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/04)

LOCKSCREWS AND CLAMPS STANDARD MOUNTING (USA)

LOCKSCREWS

PART NO.

LS-0 LS-1 LS-2 LS-3 LS-4* LS-5*

7/16 5/8 7/8 1 1-1/16 1-1/8

B DIA

C DIA

3/16

5/16

3/8

5/8

7/16

3/4

3/16 1/4 3/8 3/8 7/16 1/2

THREAD

.105/.100 #8-32 .138/.132 5/16-18 .200/.194 .200/.194 .231/.225 3/8-16 .263/.257

PRICE (NET)

.44

STANDARD MOUNTING — THINWALL (USA) E A F

TW-1 TW-2 TW-3 TW-4 TW-5 TW-7

7/16 1/2 11/16 7/8 1 3/4

LSM-1 LSM-3 LSM-5 LSM-7

15mm 18mm 22mm 32mm

LSM-2 LSM-4 LSM-6 LSM-8

18mm 22mm 27mm 38mm

3/16 3/8

5/16 3/8 7/16 9/16

3/8

5/8

1/4

3/16 1/4 3/8 1/2 5/8 3/8

.105/.100 #8-32 .138/.132 #10-32 .200/.194 .263/.257 .325/.319 5/16-18 .200/.194

.44

STANDARD MOUNTING (METRIC) C

* For extended-range bushings. The most popular locking device for renewable drill bushings. Use on either the “slip” or “fixed” side of a slip-fixed bushing. Simple, strong, compact, and economical.

7.5mm 9.5mm 12mm 15mm

13mm 16mm 20mm 24mm

6mm 8mm 10mm 12mm

3.3mm 4.3mm 5.8mm 7.3mm

M5 M6 M8 M10

.68

PROJECTED MOUNTING (METRIC)

ROUND CLAMPS

7.5mm 9.5mm 12mm 15mm

13mm 16mm 20mm 24mm

9mm 6.3mm 12mm 8.3mm 15mm 10.8mm 18mm 13.3mm

M5 M6 M8 M10

.68

STANDARD MOUNTING (USA) PART NO.

A DIA

RC-01 5/8 RC-02 RC-03 RC-04* 3/4 RC-05*

RCM-1 RCM-3 RCM-5 RCM-7

13mm 16mm 20mm 24mm

RCM-2 RCM-4 RCM-6 RCM-8

13mm 16mm 20mm 24mm

H E

5/16 7/16 1/2 17/32 9/16

5/32 17/32 .109 .125 7/32 29/32 .125 .188 9/32 1-13/32 .188 .156 .219 1/4 2-1/2 .250

H SOCKET- REPLACES PRICE HEAD CAP LOCK SCREW (NET) SCREW

5/16-18 3/8-16

LS-1 LS-2 LS-3 LS-4 LS-5

1.38

STANDARD MOUNTING (METRIC) Alternative to lockscrews when using the “fixed” side of a slipfixed SF bushing. Round clamps have less clearance under their heads, to clamp bushings tighter (which is why you cannot use them on the bushing’s “slip” side). Use them with a socket-head cap screw.

F G +.000 –.010

* For extended-range bushings.

8mm 10mm 12mm 16mm

4mm 5mm 5mm 7mm

9.5mm 15mm 30mm 80mm

2.8mm 3.3mm 3.8mm 4.5mm

3mm M5 4mm M6 5.5mm M8 7mm M10

LSM-1 LSM-3 LSM-5 LSM-7

2.94

PROJECTED MOUNTING (METRIC) 11mm 14mm 17mm 22mm

4mm 5mm 5mm 7mm

9.5mm 15mm 30mm 80mm

2.8mm 3.3mm 3.8mm 4.5mm

6mm M5 8mm M6 10.5mm M8 13mm M10

LSM-2 LSM-4 LSM-6 LSM-8

2.94

LOCKSCREW LOCATING JIG

CL-1-LSLJ

$18.75

A precision tool for centerpunching lockscrew holes. The jig is made in two parts: a reversible centerpunch and an outer body for locating. To use, just insert the bushing and place the locating jig against the lockscrew recess. Turn bushing to desired orientation, then tap centerpunch lightly. For installing lockscrews LS-1, LS-2, LS-3, LS-4, LS-5, TW-5, and TW-7. Also for installing round clamps RC-01, RC-02, RC-03, RC-04, and RC-05.

MANUFACTURING CO. 40BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(5/05)

LOCKSCREWS AND CLAMPS ROUND END CLAMPS B

1/2 D

STANDARD MOUNTING (USA) D

R RADIUS

PART NO.

H E

G F

A heavy-duty alternative to lockscrews. Allows locating tapped hole farther away from bushing to avoid interference with a larger liner. Use on either the “slip” or “fixed” side of a slip-fixed renewable bushing. Available in two heights: standard for recessed liner mounting; tall for projected headliner mounting. Use with a socket-head cap screw.

RK-01 7/16 5/16 3/16 1/8 3/4 5/8 RK-02 1/2 3/8 1/4 3/16 1 RK-03 5/8 3/4 3/8 5/16 3/16 7/16 RK-04* 7/32 11/16 1-1/8 3/4 5/16 1/2 RK-05* 1/4

H SOCKET-HEAD CAP SCREW

1/4-20

5/16

5/16-18

3/8

3/8-16

PRICE (NET)

2.21

3/8 2.48

PROJECTED MOUNTING (USA) PART NO.

RK-10 7/16 RK-11 3/4 5/8 RK-12 1/2 RK-13 RK-14 5/8 1 RK-15* 3/4 RK-16* 11/16 1-1/8 RK-17*

7/32 1/4 5/16 1/4 3/8 3/8 5/16 13/32 7/16 15/32

H SOCKET-HEAD CAP SCREW

PRICE (NET)

3/8 3/16 1/2 1/2 5/8 3/4

1/4-20

5/16 2.21

3/8-16

3/8

2.65

* For extended-range bushings.

Projected Mounting

Standard Mounting

FLAT CLAMPS H

STANDARD MOUNTING (USA)

1/2 D D

B A

3/8

1 D

A B G E F

2 HOLE H MOUNTING

Use to lock FM-type fixed-renewable bushings which have a milled locking flat. Available in two heights: standard for recessed liner mounting; tall for projected head-liner mounting. Use with one or two socket-head cap screws.

Standard Mounting

Projected Mounting

PART NO.

FC-01 FC-02 FC-03 FC-04* FC-05* FC-06* FC-07*

NO. OF HOLES 1

1/2

7/8 1 1-1/8

5/8

5/8 5/16 3/16 1/8 1/4 3/16 3/8 1 5/16

1-1/4 3/8 7/32 51/64 1-11/64 1-3/4 27/64 1-1/4 1/2 1/4 1-3/4

2 1 2

H PRICE SOCKET-HEAD CAP SCREW (NET)

1/4-20 5/16-18

3/8-16

2.21 2.48 2.76 2.48 2.76

PROJECTED MOUNTING (USA) PART NO.

NO. OF HOLES

FC-10 5/8 1/2 7/8 1 FC-11 FC-12 1 1 5/8 1 FC-13 1-1/4 FC-14 1 5/8 1-1/8 1-3/4 FC-15 2 1-1/4 FC-16* 1 1-3/4 FC-17* 2 FC-18* 1 51/64 1-11/64 1-1/4 1-3/4 FC-19* 2 1-1/4 FC-20* 1 1-3/4 FC-21* 2 * For extended-range bushings.

3/8 3/16 1/2

1/4

1/2 5/16

7/32 1/4 5/16 3/8

H PRICE SOCKET-HEAD CAP SCREW (NET)

1/4-20 2.21 5/16-18

3/8 13/32

5/8

3/8-16 27/64 7/16

3/4

15/32

2.48 2.76 2.65 2.76 2.65 2.76 2.65 2.76

MANUFACTURING CO. 41BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/02)

CHIP BREAKER CH-20-16-.1250 NCB CHM-10-20-4.50 PCH-20-16-.1250 HCH-20-16-.1250 DCCH-20-16-.1250

No counterbore on long bushings marked with * (no counterbore is standard on all other bushings) Standard metric SF-type bushing with chip breaker P bushing with chip breaker H bushing with chip breaker Directed coolant bushing with chip breaker

STANDARD ID TOLERANCES:

USA BODY OD

5/16 1/2 3/4 1 1-3/8 1-3/4 2-1/4

35/64 51/64 1-3/64 1-27/64 1-51/64 2-19/64 2-51/64

1/4

1/8

3/8

3/16

3/8

3/16

11/64 19/64 27/64 19/32 25/32 1 1-1/4

65° 65° 50° 35° 30° 30° 25°

LOCK SCREW

5/8 1/2 LS-1 3/4 5/8 7/8 3/4 1-7/64 59/64 LS-2 1-19/64 1-7/64 1-41/64 1-25/64 LS-3 1-57/64 1-41/64

METRIC BODY OD 8mm 10mm 12mm 15mm 18mm 22mm 26mm 30mm 35mm 42mm 48mm 55mm 62mm

15mm 4.5mm 6mm 3mm 18mm 6mm 22mm 7.5mm 26mm 8mm 4mm 9.5mm 30mm 11.5mm 34mm 13mm 39mm 15.5mm 46mm 10mm 5.5mm 19mm 52mm 22mm 59mm 25.5mm 66mm 28.5mm 74mm 12mm 7mm 32.5mm 82mm 36.5mm

L 65° 65° 60° 50° 50° 35° 35° 30° 30° 30° 30° 25° 25°

R 11.5mm 13mm 16mm 18mm 20mm 23.5mm 26mm 29.5mm 32.5mm 36mm 41mm 45mm 49mm

LOCK SCREW LSM-1 LSM-2 LSM-3 LSM-4

LSM-5 LSM-6

LSM-7 LSM-8

From #80 to 1/4"

+.0001/+.0004

Over 1/4 to 3/4"

+.0001/+.0005

Over 3/4 to 1-1/2"

+.0002/+.0006

Over 1-1/2 to 2-3/4" +.0003/+.0007 ID RANGE

.0625-.0934 1/16-#43 1.60-2.35mm .0935-.1935 #42-#10 2.40-4.90mm

5/16 .3125-.3123

.1405-.3438 #28-11/32 3.60-8.70mm

1/2 .5000-.4998

.2812-.5625 9/32-9/16 7.20-14.00mm

3/4 .7500-.7498

.4688-.7812 1 15/32-25/32 11.50-19.50mm 1.0000-.9998

APPLICATIONS: Similar to an SF renewable bushing, but with specially designed chipbreaking notches on the drill-exit end. Use to break up chips from tough stringy materials, to reduce friction and heat buildup. Reduces bushing wear at the drill-exit end and reduces the chance of tool or workpiece damage. A chip-breaker bushing should extend beyond its liner to allow chips to escape. Chip breakers are also available on other bushing types such as P, H, and DC (directed coolant).

ORDERING EXAMPLES: CH-20-16-.1250 CH-20-16-.1772

Standard USA SF-type bushing with chip breaker, inch ID Standard USA SF-type bushing with chip breaker, mm ID (.1772 = 4.50mm)

.7188-1.0625 1-3/8 23/32–1-1/16 18.50-27.00mm 1.3750-1.3747

.9688-1.4062 1-3/4 31/32–1-13/32 1.7500-1.7497 25.00-35.00mm

1.3438-1.8750 2-1/4 1-11/32–1-7/8 2.2500-2.2496 35.00-47.00mm

From .35 to 3mm +.002/+.008mm Over 3 to 6mm +.004/+.012mm Over 6 to 10mm +.005/+.014mm Over 10 to 18mm +.006/+.017mm Over 18 to 30mm +.007/+.020mm Over 30 to 50mm +.009/+.025mm (G6 tolerance) ANSI PRICE LOCK LENGTH PART NO. 1-5 SCREW

*3/4 *1 *1-3/8 *3/4 *1 *1-3/8 *3/4 *1 *1-3/8 *1-3/4 *2-1/8 1 1-3/8 1-3/4 2-1/8 *2-1/2 1 1-3/8 1-3/4 2-1/8 2-1/2 3 1 1-3/8 1-3/4 2-1/8 2-1/2 3 1-3/8 1-3/4 2-1/8 2-1/2 3 1-3/8 1-3/4 2-1/8 2-1/2 3

CH-20-12 CH-20-16 CH-20-22 CH-20-12 CH-20-16 CH-20-22 CH-32-12 CH-32-16 CH-32-22 CH-32-28 CH-32-34 CH-48-16 CH-48-22 CH-48-28 CH-48-34 CH-48-40 CH-64-16 CH-64-22 CH-64-28 CH-64-34 CH-64-40 CH-64-48 CH-88-16 CH-88-22 CH-88-28 CH-88-34 CH-88-40 CH-88-48 CH-112-22 CH-112-28 CH-112-34 CH-112-40 CH-112-48 CH-144-22 CH-144-28 CH-144-34 CH-144-40 CH-144-48

LS-1

Contact RC-01 Factory RK-01 RK-10 LS-1 Contact RC-01 Factory RK-01 RK-10

LS-1 Contact RC-01 Factory RK-01 RK-10 LS-1 Contact RC-01 Factory RK-01 RK-11 LS-2 Contact RC-02 Factory RK-02 RK-12

LS-2 Contact RC-02 Factory RK-02 RK-12 LS-3 Contact RC-03 Factory RK-03 RK-13 LS-3 Contact RC-03 Factory RK-03 RK-13

* Counterbored, leaving correct drill-bearing length and chip clearance (see page 6 for bearing length).

MANUFACTURING CO. 42BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/03)

CHIP BREAKER METRIC ID RANGE (G6)

1.00-4.00mm

4.01-6.00mm

OD (h5)

ANSI LENGTH PART NO.

PRICE

CHM

LOCK SCREW

*10mm CHM-8-10 8mm 8.000-7.994mm *16mm CHM-8-16

Contact Factory LSM-1 LSM-2 12mm CHM-10-12 RCM-1 10mm 20mm CHM-10-20 Contact RCM-2 10.000-9.994mm Factory 25mm CHM-10-25 12mm CHM-12-12

12mm Contact 6.01-8.00mm 12.000-11.992mm 20mm CHM-12-20 Factory 25mm CHM-12-25 16mm CHM-15-16

LSM-3

36mm CHM-15-36

RCM-4

Contact LSM-4 15mm 8.01-10.00mm 15.000-14.992mm 28mm CHM-15-28 Factory RCM-3 16mm CHM-18-16

18mm Contact 10.01-12.00mm 18.000-17.992mm 28mm CHM-18-28 Factory 36mm CHM-18-36 20mm CHM-22-20

Contact 22mm 12.01-15.00mm 22.000-21.991mm 36mm CHM-22-36 Factory 45mm CHM-22-45 20mm CHM-26-20

26mm Contact 15.01-18.00mm 26.000-25.991mm 36mm CHM-26-36 Factory

Why settle for the rest when you can have the best?

45mm CHM-26-45 25mm CHM-30-25

LSM-5

56mm CHM-30-56

RCM-6

Contact LSM-6 30mm 18.01-22.00mm 30.000-29.991mm 45mm CHM-30-45 Factory RCM-5 25mm CHM-35-25

35mm Contact 22.01-26.00mm 35.000-34.989mm 45mm CHM-35-45 Factory 56mm CHM-35-56 30mm CHM-42-30

42mm Contact 26.01-30.00mm 42.000-41.989mm 56mm CHM-42-56 Factory 67mm CHM-42-67 30mm CHM-48-30

48mm Contact 30.01-35.00mm 48.000-47.989mm 56mm CHM-48-56 Factory 67mm CHM-48-67 30mm CHM-55-30

LSM-7

67mm CHM-55-67

RCM-8

55mm Contact LSM-8 35.01-42.00mm 55.000-54.987mm 56mm CHM-55-56 Factory RCM-7 35mm CHM-62-35

62mm Contact 42.01-48.00mm 62.000-61.987mm 67mm CHM-62-67 Factory

We’ve done well, now let’s excel.

78mm CHM-62-78

* Small metric drill sizes through .80mm are counterbored 1.00mm diameter, with 3mm drill-bearing length.

MANUFACTURING CO. 43BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/98)

DIRECTED COOLANT STANDARD ID TOLERANCES: From #80 to 1/4"

+.0001/+.0004

Over 1/4 to 3/4"

+.0001/+.0005

Over 3/4 to 1-1/2"

+.0002/+.0006

From .35 to 3mm Over 3 to 6mm Over 6 to 10mm Over 10 to 18mm Over 18 to 30mm Over 30 to 50mm

+.002/+.008mm +.004/+.012mm +.005/+.014mm +.006/+.017mm +.007/+.020mm +.009/+.025mm

Over 1-1/2 to 2-3/4" +.0003/+.0007

REAMER ID TOLERANCES:

BODY OD

F DIA

5/16 1/2 3/4 1 1-3/8 1-3/4 2-1/4

35/64 51/64 1-3/64 1-27/64 1-51/64 2-19/64 2-51/64

BODY OD

5/16 1/2 3/4 1 1-3/8 1-3/4 2-1/4

1/4

3/8

1/8

3/16

3/32 3/16 1/2 3/32 5/16** 5/8 1/8 3/4 5/16 1/8 59/64 5/16 3/16 1-7/64 3/16 7/16 1-25/64 3/16 1-41/64

N DIA

11/64 19/64 27/64 19/32 25/32 1 1-1/4

65° 65° 50° 35° 30° 30° 25°

5/8 3/4 7/8 1-7/64 1-19/64 1-41/64 1-57/64

5/8 7/8 1-1/8 1-1/2 1-7/8 2-3/8 2-7/8

T DIA

U DIA

5/64 9/64 17/64 23/64 17/32 11/16 7/8

.067 .093 .104 .125 .147 .173 .173

25/64 19/32** 55/64 1-5/32 1-17/32 1-31/32 2-15/32

5/32 7/32** 7/32 7/32 9/32

** Q = 3/16, U = 39/64, V = 5/32 on 1/2" long liner bushings.

APPLICATIONS: Similar to an SF renewable bushing, but with passages to direct coolant to the cutting area. This design is particularly good for washing away chips, especially when ordered as the combination Directed Coolant Chip Breaker (DCCH). DC bushings require special liners, DCL or DCHL, to direct coolant from a drilled manifold passage to the holes in the bushing’s OD wall. Important note: Always order matching liner length (see page 45.)

From #60 to 1/4"

+.0005/+.0008

Over 1/4 to 1"

+.0006/+.0010

Over 1 to 1-1/2"

+.0008/+.0012

STANDARD LINER ID TOLERANCES: 5/16" 1/2" 3/4" 1"

+.0001/+.0004 +.0002/+.0005 +.0003/+.0006 +.0004/+.0007

ID RANGE

.0625-.0934 1/16-#43 1.60-2.35mm .0935-.1935 #42-#10 2.40-4.90mm

5/16 .3125-.3123

.1405-.3438 #28-11/32 3.60-8.70mm

1/2 .5000-.4998

.2812-.5625 9/32-9/16 7.20-14.00mm

3/4 .7500-.7498

.4688-.7812 1 15/32-25/32 11.50-19.50mm 1.0000-.9998

.7188-1.0625 1-3/8 23/32–1-1/16 18.50-27.00mm 1.3750-1.3747

ORDERING EXAMPLES: DC-20-12-.1250

Standard USA directed-coolant bushing, inch ID DCCH-20-16-.1250 Same as above, except with chip breakers (go to next length so that chip breakers extend beyond the liner) DC-20-12-.1772 Standard USA directed-coolant bushing, mm ID (.1772 = 4.50 mm) DC-20-12-.1250 REAMER Reamer tolerance on ID DC-20-12-.1250 NCB No counterbore on long bushings marked with * ( no counterbore is standard on all other bushings) DCL-32-12 Liner for renewable bushings above DCHL-32-12 Head liner for renewable bushings above

From 1 to 3mm Over 3 to 6mm Over 6 to 10mm Over 10 to 18mm Over 18 to 30mm

.9688-1.4062 1-3/4 31/32–1-13/32 1.7500-1.7497 25.00-35.00mm

1.3438-1.8750 2-1/4 1-11/32–1-7/8 2.2500-2.2496 35.00-47.00mm

1-3/8" 1-3/4" 2-1/4"

LENGTH PART NO.

*3/4 *1 *1-3/8 *3/4 *1 *1-3/8 *3/4 *1 *1-3/8 *1-3/4 *2-1/8 1 1-3/8 1-3/4 2-1/8 *2-1/2 1 1-3/8 1-3/4 2-1/8 2-1/2 3 1 1-3/8 1-3/4 2-1/8 2-1/2 3 1-3/8 1-3/4 2-1/8 2-1/2 3 1-3/8 1-3/4 2-1/8 2-1/2 3

DC-20-12 DC-20-16 DC-20-22 DC-20-12 DC-20-16 DC-20-22 DC-32-12 DC-32-16 DC-32-22 DC-32-28 DC-32-34 DC-48-16 DC-48-22 DC-48-28 DC-48-34 DC-48-40 DC-64-16 DC-64-22 DC-64-28 DC-64-34 DC-64-40 DC-64-48 DC-88-16 DC-88-22 DC-88-28 DC-88-34 DC-88-40 DC-88-48 DC-112-22 DC-112-28 DC-112-34 DC-112-40 DC-112-48 DC-144-22 DC-144-28 DC-144-34 DC-144-40 DC-144-48

+.006/+.012mm +.010/+.018mm +.013/+.022mm +.016/+.027mm +.020/+.033mm +.0006/+.0010 +.0008/+.0012 +.0010/+.0015 PRICE LOCK 1-5 SCREW

LS-1

Contact RC-01 Factory RK-01 RK-11 LS-1 Contact RC-01 Factory RK-01 RK-11

LS-1 Contact RC-01 Factory RK-01 RK-11 LS-1 Contact RC-01 Factory RK-01 RK-11 LS-2 Contact RC-02 Factory RK-02 RK-12

LS-2 Contact RC-02 Factory RK-02 RK-12 LS-3 Contact RC-03 Factory RK-03 RK-13 LS-3 Contact RC-03 Factory RK-03 RK-13

* Counterbored, leaving correct drill-bearing length and chip clearance (see page 6 for depth).

MANUFACTURING CO. 44BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/03)

DIRECTED COOLANT LENGTH

LENGTH

Q DIA

SEE BELOW AND PAGE 44 FOR DIMENSIONS

HEAD LINERS

LINERS ID

5/16

1/2

3/4

1/2 .5017-.5014 (.520-.515 UNG)

3/4 .7518-.7515 (.770-.765 UNG)

1 1.0018-1.0015 (1.020-1.015 UNG)

1-3/8 1.3772-1.3768 (1.395-1.390 UNG)

1-3/4 1.7523-1.7519 1-3/8 (1.770-1.765 UNG)

1-3/4

2-1/4 2.2525-2.2521 (2.270-2.265 UNG)

2-1/4

2-3/4 2.7526-2.7522 (2.770-2.765 UNG)

LENGTH

LINER PART NO.

PRICE

1/2 3/4 1 1-3/8 1/2 3/4 1 1-3/8 1-3/4 2-1/8 3/4 1 1-3/8 1-3/4 2-1/8 2-1/2 3/4 1 1-3/8 1-3/4 2-1/8 2-1/2 3 3/4 1 1-3/8 1-3/4 2-1/8 2-1/2 3 1 1-3/8 1-3/4 2-1/8 2-1/2 3 1 1-3/8 1-3/4 2-1/8 2-1/2 3

DCL-32-8 DCL-32-12 DCL-32-16 DCL-32-22 DCL-48-8 DCL-48-12 DCL-48-16 DCL-48-22 DCL-48-28 DCL-48-34 DCL-64-12 DCL-64-16 DCL-64-22 DCL-64-28 DCL-64-34 DCL-64-40 DCL-88-12 DCL-88-16 DCL-88-22 DCL-88-28 DCL-88-34 DCL-88-40 DCL-88-48 DCL-112-12 DCL-112-16 DCL-112-22 DCL-112-28 DCL-112-34 DCL-112-40 DCL-112-48 DCL-144-16 DCL-144-22 DCL-144-28 DCL-144-34 DCL-144-40 DCL-144-48 DCL-176-16 DCL-176-22 DCL-176-28 DCL-176-34 DCL-176-40 DCL-176-48

10.75 11.41 12.61 13.83 10.75 11.07 11.78 13.83 15.37 17.40 12.42 12.94 13.63 15.86 17.20 19.25 14.99 17.20 18.56 21.29 24.04 26.39 34.89 20.47 18.56 20.47 22.64 25.70 27.16 39.60 22.82 24.86 26.90 30.49 32.98 45.42 24.86 27.22 29.97 32.33 35.59 47.27

MATCHING RENEWABLE BUSHING STANDARD

CHIP BREAKER

HEAD LINER PART NO.

— DC-20-12 DC-20-16 DC-20-22 — DC-32-12 DC-32-16 DC-32-22 DC-32-28 DC-32-34 — DC-48-16 DC-48-22 DC-48-28 DC-48-34 DC-48-40 — DC-64-16 DC-64-22 DC-64-28 DC-64-34 DC-64-40 DC-64-48 — DC-88-16 DC-88-22 DC-88-28 DC-88-34 DC-88-40 DC-88-48 — DC-112-22 DC-112-28 DC-112-34 DC-112-40 DC-112-48 — DC-144-22 DC-144-28 DC-144-34 DC-144-40 DC-144-48

DCCH-20-12 DCCH-20-16 DCCH-20-22 — DCCH-32-12 DCCH-32-16 DCCH-32-22 DCCH-32-28 DCCH-32-34 — DCCH-48-16 DCCH-48-22 DCCH-48-28 DCCH-48-34 DCCH-48-40 — DCCH-64-16 DCCH-64-22 DCCH-64-28 DCCH-64-34 DCCH-64-40 DCCH-64-48 — DCCH-88-16 DCCH-88-22 DCCH-88-28 DCCH-88-34 DCCH-88-40 DCCH-88-48 — DCCH-112-22 DCCH-112-28 DCCH-112-34 DCCH-112-40 DCCH-112-48 — DCCH-144-22 DCCH-144-28 DCCH-144-34 DCCH-144-40 DCCH-144-48 —

DCHL-32-8 DCHL-32-12 DCHL-32-16 DCHL-32-22 DCHL-48-8 DCHL-48-12 DCHL-48-16 DCHL-48-22 DCHL-48-28 DCHL-48-34 DCHL-64-12 DCHL-64-16 DCHL-64-22 DCHL-64-28 DCHL-64-34 DCHL-64-40 DCHL-88-12 DCHL-88-16 DCHL-88-22 DCHL-88-28 DCHL-88-34 DCHL-88-40 DCHL-88-48 DCHL-112-12 DCHL-112-16 DCHL-112-22 DCHL-112-28 DCHL-112-34 DCHL-112-40 DCHL-112-48 DCHL-144-16 DCHL-144-22 DCHL-144-28 DCHL-144-34 DCHL-144-40 DCHL-144-48 DCHL-176-16 DCHL-176-22 DCHL-176-28 DCHL-176-34 DCHL-176-40 DCHL-176-48

PRICE

12.42 13.12 15.86 18.56 12.42 13.12 14.46 16.17 18.17 20.47 14.84 15.48 16.17 19.25 19.90 22.90 16.17 17.71 18.93 21.29 23.46 26.39 43.06 20.79 21.63 23.34 25.70 28.78 31.84 49.00 26.02 28.25 30.62 33.36 37.06 52.40 30.30 33.36 36.75 39.86 43.89 58.18

MATCHING RENEWABLE BUSHING STANDARD

CHIP BREAKER

MANUFACTURING CO. 45BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/03)

OIL GROOVE APPLICATIONS: Oil grooves are available on most drill-bushing types, including P, H, and SF. Use when you need complete drill lubrication and cooling, such as when drilling hardened steel. Oil grooves are specially designed coolant passageways in the bushing’s ID wall. Choose from 25 different groove styles. End wipers are also available, to keep out dirt and chips.

OPTIONAL WIPERS 45° TYP. .020/.030 TYPICAL FLAT.

WIPER END SHARP BOTH ENDS

Coolant passage

ORDERING EXAMPLES: P-48-16-.5000-AJ P-48-16-.4724-AJ P-48-16-.5000-AJ-AAA SF-48-16-.5000-AJ

P bushing with AJ oil groove, inch ID P bushing with AJ oil groove, mm ID (.4724 = 12.00mm) P bushing with AJ oil groove and AAA wiper SF bushing with AJ oil groove

STYLE AAA HEADLESS BUSHINGS

THREE GENERAL TYPES: 1. With oil hole. A single radial hole in the bushing wall allows coolant to flow from a manifold passage to the internal oil grooves. Bushing must be installed to line up the radial hole with the manifold passage.

WIPER END

2. With oil hole and external groove. OD groove allows coolant to flow around the bushing, then through the radial hole in the bushing's wall to the internal oil grooves. Allows installing the bushing at any orientation, and mounting bushings in series using a single manifold passage. This type is our most popular. 3. Without oil feed. No external coolant feed through a manifold passage, so all coolant enters through the top. This type is also commonly used as a bearing bushing, packed with oil or grease.

OIL-GROOVE STYLES: We offer a wide selection of oil-groove styles in each general type. This allows choosing a style to suit various operating conditions, lubrication requirements, and individual preferences.

STYLE ABB HEAD-TYPE BUSHINGS

OPTIONAL WIPERS: To guard against dirt and chips entering the bushing ID, order oilgroove bushings with a wiper end. Note: do not order an oil-groove style that breaks out at the wiper end (AA, AB, AG, AH, AD, or AE). Order style AAA for headless bushings (install wiper in either direction). Order style ABB or ACC for head-type bushings.

TECHNICAL DATA: Oil-groove dimensions - 1/16" wide x 1/32" deep Oil-hole dimensions - 1/4" diameter External-groove dimensions - 5/16" wide x 3/64" deep Allowable ID range - 1/2" to 8" Allowable length range - 1/2" to 8" Oil grooves stop 1/8" short of bushing end

WIPER END

STYLE ACC HEAD-TYPE BUSHINGS

PRICING: Please contact factory for pricing on oil-groove bushings.

MANUFACTURING CO. 46BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/97)

OIL GROOVE

WITH OIL HOLE

AC Helix

WITH OIL HOLE & EXTERNAL GROOVE

Helix Open Bottom

AJ Helix

Helix Open Bottom

WITHOUT OIL FEED

AF Helix

Helix Open both ends

Straight

Helix Open both ends

Loop

Double Loop

AS Loop

Figure 8

Double Figure 8

Figure 8

Double Loop

Straight

Double Loop

Figure 8

Helix Open Bottom

Two Holes

Loop

Double Figure 8

Helix with ID groove

MANUFACTURING CO. 47BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(2/89)

OIL GROOVE

OIL-GROOVE CONVERSION CHART Carr Lane

Ace

Acme

Style AA

Type 1

Style 5

Style AB

Type 2

Style AC

Type 3

Style AD Style AE

American

Briney

Economy

Style 1

Style A

Style 8

Style 2

Style B

Style 2

Style 3

Style C

Type 4

Style 4

Type 6

Style 7

Style 5

Style AF

Type 5

Style 1

Style AG

Type 7

Style 6

Style AH

Type 8

Style AJ

Type 9

Style AK Style AL

United

Universal

Welch

Style 1A

Style A

Style B

Style 2A

Style B

Style C

Style 3A

Style C

Style D

Style 1

Style D

Style E

Style 2

Style E

Style 6

Style F

Style 3

Style F

Style 7

Style G

Style 1B

Style G

Style 9

Style 8

Style H

Style 2B

Style H

Style 3

Style 9

Style J

Style 3B

Style J

Type 10

Style 10

Style K

Style 4

Style K

Type 11

Style 11

Style L

Style 4A

Style L

Style AM

Type 12

—

Style 12

Style M

Style 6

Style M

Style AN

Type 14

Style 20

Style 13

Style N

Style 7A

Style N

Style AO

Type 13

Style 12

Style 14

Style O

Style 12C

Style O

Style AP

Type 15

Style 21

Style 15

Style P

Style 7B

Style P

Style AQ

Type 16

Style 19

Style 16

Style Q

Style 7

Style Q

Style AR

Type 17

Style 14

Style 17

Style R

Style 9A

Style R

Style AS

Type 18

Style 15

Style 18

Style S

Style 9B

Style S

Style AJ

Type 19

Style 13

Style 19

Style T

Style 9

Style T

Style AU

Type 20

Style 17

Style 20

Style U

Style 10A

Style U

Style AV

Type 21

Style 18

Style 21

Style V

Style 10B

Style V

Style AW

Type 22

Style 16

Style 22

Style W

Style 10

Style W

Style AX

Type 23

Style 23

Style X

Style 8A

Style X

Style AY

Type 24

Style 24

Style Y

Style 8B

Style Y

Style AZ

Type 25

Style 22

Style 25

Style Z

Style 8

Style Z

WIPER CONVERSION CHART Carr Lane

Ace

Acme

Style AAA

Type WEA

Style WA

Style ABB

Type WEB

Style ACC

Type WEC

American

Briney

Economy

United

Universal

Welch

Style A

Style AA

Style PE

Style AA

Style WC

Style B

Style BB

Style HW

Style BB

Style WB

Style C

Style CC

Style HE

Style CC

MANUFACTURING CO. 48BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(2/89)

DIAMOND GROOVE LENGTH

APPLICATIONS: A bushing for cast-in-place or potted installation. Diamond-knurled OD provides superior holding strength against both rotational and axial forces. Since the bushingâ&#x20AC;&#x2122;s OD is not ground, keep the ID accurately located during casting or potting to ensure accuracy in the finished tool.

ORDERING EXAMPLES: DG-26-16-.1875 DG-26-16-.1772 DG-26-16-.1875 REAMER DG-26-16-.1875 NCB

DGM-8-12-4.50

Standard USA bushing, inch ID Standard USA bushing, mm ID (.1772 = 4.50mm) Reamer tolerance on ID No counterbore on long bushings marked with * (no counterbore is standard on all other bushings) Standard metric bushing

STANDARD ID TOLERANCES: From #55 to 1/4"

+.0001/+.0004

Over 1/4 to 3/4"

+.0001/+.0005

Over 3/4 to 1-1/2"

+.0002/+.0006

From 1 to 3mm +.002/+.008mm Over 3 to 6mm +.004/+.012mm Over 6 to 10mm +.005/+.014mm Over 10 to 18mm +.006/+.017mm Over 18 to 19mm +.007/+.020mm (G6 tolerance)

ID RANGE

.0520-.0995 #55-#39 1.35-2.50mm

13/64 .223-.213

.0980-.1406 #40-9/64 2.50-3.50mm

1/4 .275-.260

.1250-.1935 1/8-#10 3.20-4.90mm

5/16 .337-.322

.1562-.2570 5/32-F 4.00-6.50mm

13/32 .431-.416

.1562-.3160 5/32-O 4.00-8.00mm

1/2 .525-.510

.3125-.4375 5/16-7/16 7.90-11.00mm

5/8 .650-.635

.3125-.5312 5/16-17/32 8.00-13.00mm

3/4 .775-.760

.5000-.6562 1/2-21/32 13.00-16.50mm

7/8 .900-.885

.5000-.7656 1 1/2-49/64 1.035-1.010 13.00-19.00mm

LENGTH

ANSI PART NO.

PRICE 1-5

1/4 5/16 3/8 1/2 1/4 5/16 3/8 1/2 *3/4 1/4 5/16 3/8 1/2 3/4 *1 1/4 5/16 3/8 1/2 3/4 *1 5/16 3/8 1/2 3/4 *1 3/8 1/2 3/4 1 1-3/8 3/8 1/2 3/4 1 1-3/8 3/8 1/2 3/4 1 1-3/8 1/2 3/4 1 1-3/8 1-1/2

DG-13-4 DG-13-5 DG-13-6 DG-13-8 DG-16-4 DG-16-5 DG-16-6 DG-16-8 DG-16-12 DG-20-4 DG-20-5 DG-20-6 DG-20-8 DG-20-12 DG-20-16 DG-26-4 DG-26-5 DG-26-6 DG-26-8 DG-26-12 DG-26-16 DG-32-5 DG-32-6 DG-32-8 DG-32-12 DG-32-16 DG-40-6 DG-40-8 DG-40-12 DG-40-16 DG-40-22 DG-48-6 DG-48-8 DG-48-12 DG-48-16 DG-48-22 DG-56-6 DG-56-8 DG-56-12 DG-56-16 DG-56-22 DG-64-8 DG-64-12 DG-64-16 DG-64-22 DG-64-24

8.57 9.06 9.55 9.73 6.03 6.31 6.62 6.93 8.76 4.68 5.36 5.67 5.85 6.62 7.91 4.37 4.68 5.05 5.36 5.85 6.62 4.68 5.05 5.36 5.85 6.62 4.37 4.37 5.36 5.67 6.62 4.68 4.68 5.36 5.85 7.91 7.30 6.45 6.62 6.93 7.61 6.62 6.62 7.30 7.91 8.76

* Counterbored, leaving correct drill-bearing length and clearance (see page 6 for bearing length).

REAMER ID TOLERANCES: From #60 to 1/4"

+.0005/+.0008

Over 1/4 to 1"

+.0006/+.0010

From 1 to 3mm +.006/+.012mm Over 3 to 6mm +.010/+.018mm Over 6 to 10mm +.013/+.022mm Over 10 to 18mm +.016/+.027mm Over 18 to 19mm +.020/+.033mm (F6 tolerance)

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 49BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

DGM ID RANGE (G6)

LENGTH

1.00-1.80mm 5mm 5.50-5.25mm 1.81-2.60mm

2.61-3.30mm

DIAMOND GROOVE METRIC

6mm 6.65-6.25mm

3.31-4.00mm

DGM-5-6

24.10

9mm

DGM-5-9

26.83

6mm

DGM-5-6

9.99

9mm

DGM-5-9

11.12

8mm

DGM-6-8

7.71

12mm DGM-6-12

8.08

16mm DGM-6-16

10.20

4.01-5.00mm

5.01-6.00mm

6.01-8.00mm

DGM-7-8

6.60

12mm DGM-7-12

6.81

16mm DGM-7-16

7.71

8mm

8mm 8.65-8.25mm

PRICE 1-5

6mm

8mm

7mm 7.65-7.25mm

ANSI PART NO.

DGM-8-8

5.88

12mm DGM-8-12

6.24

16mm DGM-8-16

6.81

10mm DGM-10-10

6.24

10mm 16mm DGM-10-16 10.65-10.25mm

6.81

20mm DGM-10-20

7.71

10mm DGM-12-10

6.24

12mm 16mm DGM-12-16 12.65-12.25mm

6.81

20mm DGM-12-20

7.71

12mm DGM-15-12

5.10

15mm 8.01-10.00mm 20mm DGM-15-20 15.65-15.25mm

6.24

25mm DGM-15-25

6.60

12mm DGM-18-12

5.45

18mm 20mm DGM-18-20 10.01-12.00mm 18.65-18.25mm

6.24

25mm DGM-18-25

6.81

16mm DGM-22-16

7.71

22mm 12.01-15.00mm 22.65-22.25mm 28mm DGM-22-28

8.08

36mm DGM-22-36

8.87

16mm DGM-26-16

7.71

26mm 15.01-18.00mm 26.90-26.25mm 28mm DGM-26-28 36mm DGM-26-36

9.22 10.20

Something you get for nothing is usually worth it.

Temper is what gets most of us into trouble. Pride is what keeps us there.

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 50BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

SERRATA GROOVE LENGTH

ID RANGE

.0520-.0995 #55-#39 1.35-2.50mm

13/64 .223-.213

.0980-.1406 #40-9/64 2.50-3.50mm

1/4 .275-.260

.1250-.1935 1/8-#10 3.20-4.90mm

5/16 .337-.322

.1562-.2570 5/32-F 4.00-6.50mm

13/32 .431-.416

.1562-.3160 5/32-O 4.00-8.00mm

1/2 .525-.510

.3125-.4375 5/16-7/16 7.90-11.00mm

5/8 .650-.635

.3125-.5312 5/16-17/32 8.00-13.00mm

3/4 .775-.760

.5000-.6562 1/2-21/32 13.00-16.50mm

7/8 .900-.885

APPLICATIONS: Can be cast in place or potted, just as a diamond-groove bushing, or can also be pressed into an installation hole. Straight knurl provides less resistance to axial loads than the diamond knurl on a DG bushing. Since the bushingâ&#x20AC;&#x2122;s OD is not ground, keep the ID accurately located during casting or potting to ensure accuracy in the finished tool.

ORDERING EXAMPLES: SG-26-16-.1875 SG-26-16-.1772

Standard USA bushing, inch ID Standard USA bushing, mm ID (.1772 = 4.50mm) SG-26-16-.1875 REAMER Reamer tolerance on ID SG-26-16-.1875 NCB No counterbore on long bushings marked with * (no counterbore is standard on all other bushings) Prices shown here apply to standard bushings only, for a standard drill size within the stated ID range. See back cover for decimal equivalents. To price non-standard sizes, including all reamer and tap-guide bushings, see page 7.

STANDARD ID TOLERANCES: From #55 to 1/4" Over 1/4 to 3/4" Over 3/4 to 1-1/2"

+.0001/+.0004 +.0001/+.0005 +.0002/+.0006

From 1 to 3mm +.002/+.008mm Over 3 to 6mm +.004/+.012mm Over 6 to 10mm +.005/+.014mm Over 10 to 18mm +.006/+.017mm Over 18 to 19mm +.007/+020mm (G6 tolerance)

.5000-.7656 1 1/2-49/64 1.035-1.010 13.00-19.00mm

LENGTH

ANSI PART NO.

PRICE 1-5

1/4 5/16 3/8 1/2 1/4 5/16 3/8 1/2 *3/4 1/4 5/16 3/8 1/2 3/4 *1 1/4 5/16 3/8 1/2 3/4 *1 5/16 3/8 1/2 3/4 *1 3/8 1/2 3/4 1 1-3/8 3/8 1/2 3/4 1 1-3/8 3/8 1/2 3/4 1 1-3/8 1/2 3/4 1 1-3/8 1-1/2

SG-13-4 SG-13-5 SG-13-6 SG-13-8 SG-16-4 SG-16-5 SG-16-6 SG-16-8 SG-16-12 SG-20-4 SG-20-5 SG-20-6 SG-20-8 SG-20-12 SG-20-16 SG-26-4 SG-26-5 SG-26-6 SG-26-8 SG-26-12 SG-26-16 SG-32-5 SG-32-6 SG-32-8 SG-32-12 SG-32-16 SG-40-6 SG-40-8 SG-40-12 SG-40-16 SG-40-22 SG-48-6 SG-48-8 SG-48-12 SG-48-16 SG-48-22 SG-56-6 SG-56-8 SG-56-12 SG-56-16 SG-56-22 SG-64-8 SG-64-12 SG-64-16 SG-64-22 SG-64-24

* Counterbored, leaving correct drill-bearing length and clearance (see page 6 for bearing length).

REAMER ID TOLERANCES: From #60 to 1/4"

+.0005/+.0008

Over 1/4 to 1"

+.0006/+.0010

From 1 to 3mm +.006/+.012mm Over 3 to 6mm +.010/+.018mm Over 6 to 10mm +.013/+.022mm Over 10 to 18mm +.016/+.027mm Over 18 to 19mm +.020/+.033mm (F6 tolerance)

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 51BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

DIAMOND-KNURL UN-A-LOK® LINER

ULD

USA ID

3/16

5/16

METRIC

USA BODY OD

5/16 1/2 3/4 1 1-3/8

F DIA

1/4 .365 3/32 3/8 9/16 3/32 1/2 13/16 3/32 21/32 1-1/16 1/8 7/8 1-7/16 1/8

BODY OD

F DIA

12mm 9.5mm 15mm 15mm 11mm 18mm 18mm 13mm 22mm 22mm 15.5mm 26mm 26mm 17.5mm 30mm

1/2 G

3mm 3mm 4mm 4mm 4mm

3/4

LENGTH

5/16 .342-.332

1/2 .533-.523

3/4 .785-.775

1 1.035-1.025

1-3/8 1.415-1.405

PRICE 1-5

PART NO.

5/16

ULD-20-5

12.38

3/8

ULD-20-6

14.03

1/2

ULD-20-8

14.69

3/4

ULD-20-12

15.84

3/8

ULD-32-6

11.70

1/2

ULD-32-8

11.88

3/4

ULD-32-12

12.70

1/2

ULD-48-8

16.34

3/4

ULD-48-12

18.65

ULD-48-16

21.13

1/2

ULD-64-8

16.83

3/4

ULD-64-12

19.13

ULD-64-16

21.61

1/2

ULD-88-8

19.63

3/4

ULD-88-12

22.61

ULD-88-16

25.54

1-3/8

ULD-88-22

26.56

APPLICATIONS: A liner for cast-in-place or potted installation, used to hold SF renewable drill bushings. Un-A-Lok® liners incorporate a special locking tab that eliminates the need for a lockscrew. Holds only the “slip” side of an SF bushing, not the “fixed” side. Diamond-knurled OD provides superior holding strength against both rotational and axial forces. Since the bushing’s OD is not ground, keep the ID accurately located during casting or potting to ensure accuracy in the finished tool.

METRIC ID (G6)

LENGTH

8mm

10mm ULDM-12-10 Contact 12mm 12.65-12.25mm 16mm ULDM-12-16 Factory

10mm

Contact 15mm 20mm ULDM-15-20 Factory 15.65-15.25mm

12mm

15mm

Standard USA liner bushing Standard metric liner bushing

18mm

ULDM-15-12

25mm

ULDM-15-25

12mm

ULDM-18-12

Contact 18mm 20mm ULDM-18-20 Factory 18.65-18.25mm 25mm

ULDM-18-25

16mm

ULDM-22-16

22mm 28mm ULDM-22-28 Contact Factory 22.65-22.25mm

ORDERING EXAMPLES: ULD-20-5 ULDM-12-10

PRICE 1-5

PART NO.

36mm

ULDM-22-36

16mm

ULDM-26-16

26mm 28mm ULDM-26-28 Contact Factory 26.90-26.25mm 36mm

ULDM-26-36

QUANTITY DISCOUNTS STANDARD LINER ID TOLERANCES: 3/16 to 5/16" 1/2" 3/4" 1"

+.0001/+.0004 +.0002/+.0005 +.0003/+.0006 +.0004/+.0007

8 to 10mm +.005/+.014mm 12 to 18mm +.006/+.017mm (G6 tolerance)

Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 52BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(2/04)

EZ-CAST LINER ID

LENGTH

OD 5/16 .3126-.3129

1/2 .525-.510

ID 1/2 .5002-.5005

LENGTH

3/4 .775-.760

APPLICATIONS: Another liner for cast-in-place or potted installation, used to hold SF renewable drill bushings. Unlike diamond-knurl unilock liners, EZ-cast liners hold either the “slip” or “fixed” side of an SF bushing, since they include an integral lockscrew holder. Diamond-knurled OD provides superior holding strength against both rotational and axial forces. Since the bushing’s OD is not ground, keep the ID accurately located during casting or potting to ensure accuracy in the finished tool.

3/4 .7503-.7506

1 1.0004-1.0007

1 1.035-1.010

1-3/8 1.410-1.385

PART NO.

PRICE 1-5

1/2

EZ-32-8

9.91

3/4

EZ-32-12

10.56

EZ-32-16

11.70

1/2

EZ-48-8

9.25

3/4

EZ-48-12

10.08

EZ-48-16

10.56

1-3/8

EZ-48-22

13.85

1/2

EZ-64-8

11.70

3/4

EZ-64-12

11.88

EZ-64-16

12.38

1-3/8

EZ-64-22

13.51

3/4

EZ-88-12

15.51

EZ-88-16

16.63

1-3/8

EZ-88-22

18.81

ORDERING EXAMPLE: EZ-32-8

Standard USA liner bushing

QUANTITY DISCOUNTS

STANDARD LINER ID TOLERANCES: 5/16" 1/2" 3/4" 1"

+.0001/+.0004 +.0002/+.0005 +.0003/+.0006 +.0004/+.0007

Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

500 Up 52% .48

200 -499 50% .50

Handy Reference Books Jig & Fixture Handbook • 430 pages • Completely illustrated • Hardbound manual • Step-by-step instructions • Handy reference charts - Decimals and fractions - Units of measure - Trigonometry calculations - Much more!

Modular Fixturing Handbook • 216 pages • Step-by-step building • Includes chart of break-even calculations • Checklist helps you avoid problems caused by missing important steps in building • Illustrated examples

Jig & Fixture Handbook: $19.95 — Modular Fixturing Handbook: $12.00 — Order online at www.carrlane.com/books

MANUFACTURING CO. 53BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(7/01)

GUN DRILL TYPE GDL GUN-DRILL LINER A ID

C LGTH

B OD

13/64 1/4

LOCK SCREW

PART NO.

PRICE

1/8

GDL-64-16-13

35.50

5/32

GDL-64-16-16

35.50

7/32

GDL-64-16-20

35.50 LS-2

1 5/16 BODY OD

1 1-3/8 1-3/4

F DIA

7/16 1-27/64 3/8 7/16 1-51/64 3/8 3/4 2-19/64 3/8

3/16 19/32 35˚ 59/64 3/16 25/32 30˚ 1-7/64 1 30˚ 1-25/64 3/16

LOCK SCREW

LS-2 LS-2 LS-2

1.0000-.9998

1/2

11/32 GDL-64-16-32

35.50

3/4

9/16

GDL-64-16-48

35.50

13/64

1/8

GDL-88-22-13

40.60

1/4

5/32

GDL-88-22-16

40.60

7/32

GDL-88-22-20

40.60

11/32 GDL-88-22-32

40.60

GDL-88-22-48

40.60

51/64 GDL-88-22-64

40.60

5/16 GUN-DRILL LINER P. 54

1/2

1-3/8 1.3750-1.3747

LS-2

1-3/8

GUN DRILL 3/4

9/16

1 13/64

GUN-DRILL INSERT P. 55

APPLICATIONS:

GDL-112-28-13 46.70

1/4

5/32 GDL-112-28-16 46.70

5/16

7/32 GDL-112-28-20 46.70

1/2

These bushings are for gun-drilling machines, such as Eldorado, Drillmation, deHoff, and Lahr. Gun-drill bushings are similar to SF renewable bushings, but with the drill bearing at the bushing’s head end. Depending on the gun-drilling machine, bushings are either one-piece or two-piece (a liner and an insert).

1/8

1-3/4 1.7500-1.7497

1-3/4 11/32 GDL-112-28-32 46.70 LS-2

3/4

9/16 GDL-112-28-48 46.70

51/64 GDL-112-28-64 46.70

1-3/8

1-3/64 GDL-112-28-88 46.70

Drill

Workpiece

ORDERING EXAMPLE: GDL-112-28-20

Liner for any insert with a 5/16 OD

Prices shown here apply to standard bushings only, for a standard drill size within the stated ID range. See back cover for decimal equivalents. To price non-standard sizes, see page 7.

STANDARD LINER ID TOLERANCES: 13/64" 1/4 to 5/16" 1/2" 3/4 to 1" 1-3/8"

+.0014/+.0016 +.0015/+.0017 +.0016/+.0018 +.0017/+.0019 +.0021/+.0023

QUANTITY DISCOUNTS Quantity Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 54BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(2/05)

GUN DRILL

TYPE GDI GUN-DRILL INSERTS A ID

GUN-DRILL LINER P. 54 GUN DRILL

GUN-DRILL INSERT P. 55

B OD

.0635-.0995 13/64 #52-#39 .2046-.2043 1.65-2.50mm .0980-.1406 1/4 #40-9/64 .2516-.2513 2.50-3.50mm .1250-.1935 5/16 1/8-#10 .3141-.3138 3.20-4.90mm .1875-.3160 1/2 3/16-O .5017-.5014 4.80-8.00mm .3125-.5312 3/4 5/16-17/32 .7518-.7515 8.00-13.50mm .5000-.7656 1 1/2-49/64 1.0018-1.0015 13.00-19.00mm .6250-1.0312 1-3/8 5/8–1-1/32 1.3772-1.3768 16.00-26.00mm

C LGTH

PART NO.

1/2 3/4 1 1/2 3/4 1 1/2 3/4 1 1/2 3/4 1 1/2 3/4 1

GDI-13-8 GDI-13-12 GDI-13-16 GDI-16-8 GDI-16-12 GDI-16-16 GDI-20-8 GDI-20-12 GDI-20-16 GDI-32-8 GDI-32-12 GDI-32-16 GDI-48-8 GDI-48-12 GDI-48-16

3/4

PRICE

20.65 21.50 22.55 19.85 20.80 21.75 18.10 18.50 19.95 17.55 17.70 18.75 17.55 17.55 18.10 GDI-64-12 18.65

MATCHING LINER GDL-64-16-13 GDL-88-22-13 GDL-112-28-13 GDL-64-16-16 GDL-88-22-16 GDL-112-28-16 GDL-64-16-20 GDL-88-22-20 GDL-112-28-20 GDL-64-16-32 GDL-88-22-32 GDL-112-28-32 GDL-64-16-48 GDL-88-22-48 GDL-112-28-48 GDL-88-22-64

GDI-64-16 19.15 GDL-112-28-64

GDI-88-16 22.55 GDL-112-28-88

ORDERING EXAMPLES: GDI-20-16-.1250

Gun-drill insert for 1-3/4" OD liner GDL-112-28-20, inch ID Gun-drill insert for 1-3/4" OD liner GDL-112-28-20, mm ID (.1772 = 4.50mm)

GDI-20-16-.1772

Prices shown here apply to standard bushings only, for a standard drill size within a stated ID range. See back cover for decimal equivalents. To price non-standard sizes, see page 7.

STANDARD ID TOLERANCES: #52 to 1-1/32"

-.0000/+.0002

1.65 to 26mm

-.000/+.005mm

QUANTITY DISCOUNTS Quantity Discount % Multiplier

CHIP AND COOLANT DEFLECTOR

SPINDLE DRIVER SOCKET WHIPGUIDES

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

GUN DRILL LINER CHIP BOX

GUN DRILL INSERT

MANUFACTURING CO. 55BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(2/05)

GUN DRILL TYPE GDE ONE-PIECE ELDORADO TYPE ID RANGE

BODY OD

F DIA

1 1-3/8

1-27/64 1-51/64

3/8 3/8

3/16 3/16

19/32 25/32

35˚ 30˚

59/64 1-7/64

LENGTH PART NO.

.1250-.7812 1 1/8-25/32 1.0000-.9998 3.20-19.50mm

PRICE 1-5

3/4

GDE-64-12

39.25

GDE-64-16

42.40

1-3/8

GDE-64-22

44.40

GDE-88-16

44.40

1-3/8

GDE-88-22

47.40

LOCK SCREW

LS-2

ORDERING EXAMPLES: GDE-64-12-.1250 GDE-64-12-.1772

Standard gun-drill bushing, inch ID Standard gun-drill bushing, mm ID (.1772 = 4.50mm)

STANDARD ID TOLERANCES: 1/8 to 1-1/16"

-.0000/+.0002

3 to 27mm

.1250-1.0625 1-3/8 1/8-1-1/16 1.3750-1.3747 3.20-27.00mm

LS-2

-.000/+.005mm

TYPE GDD ONE-PIECE ELDORADO DEEP TYPE ID RANGE

ORDERING EXAMPLES: GDD-88-30-.1250 GDD-88-30-.1772

Standard gun-drill bushing, inch ID Standard gun-drill bushing, mm ID (.1772 = 4.50mm)

-.0000/+.0002

D EXT.

PART NO.

PRICE LOCK 1-5 SCREW

1-7/8

1/2

GDD-88-30

52.15

GDD-88-38

58.10

1-1/2

GDD-88-46

60.70

GDD-88-54

67.50

.1250-1.0625 1-3/8 2-3/8 1/8-1-1/16 1.37503.20-27.00mm 1.3747 2-7/8

STANDARD ID TOLERANCES: 1/8 to 1-1/16"

C LGTH.

LS-2

3-3/8

3 to 27mm

-.000/+.005mm

TYPE GDH ONE-PIECE DEHOFF TYPE ID RANGE BODY OD

F DIA

1 1-3/8

1-27/64 1-51/64

3/8 3/8

3/16 3/16

19/32 25/32

35˚ 30˚

59/64 1-7/64

LENGTH

PART NO.

PRICE LOCK SCREW 1-5

3/4

GDH-64-12

37.65

GDH-64-16

40.35

1-3/8

GDH-64-22

42.40

.1250-1.0625 1 1-3/8 1/8-1-1/16 3.20-27.00mm 1.3750-1.3747 1-3/8

GDH-88-16

42.40

GDH-88-22

45.10

.1250-.7812 1 1/8-25/32 1.0000-.9998 3.20-19.50mm

ORDERING EXAMPLES: GDH-64-12-.1250 GDH-64-12-.1772

Standard gun-drill bushing, inch ID Standard gun-drill bushing, mm ID (.1772 = 4.50mm)

STANDARD ID TOLERANCES: 1/8 to 1-1/16"

-.0000/+.0002

3 to 27mm

-.000/+.005mm

LS-2

QUANTITY DISCOUNTS

QUANTITY DISCOUNTS FOR ABOVE TYPES Quantity Prices shown here apply to standard bushings only, for a standard drill size within the stated ID range. See back cover for decimal equivalents. To price non-standard sizes, see page 7.

LS-2

Discount % Multiplier

1 -5 Net 1.00

6 -11 18% .82

12 -23 29% .71

24 -49 34% .66

50 -99 42% .58

100 -199 48% .52

200 -499 50% .50

500 Up 52% .48

MANUFACTURING CO. 56BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(2/05)

MINI MODULAR FIXTURING

IDEAL FOR SMALLER PARTS, WHICH ARE OFTEN MACHINED IN MULTIPLES

New mini-size modular fixturing, now available from Carr Lane, is designed for pallets as small as 300mm square, and is ideal for smaller parts, which are often machined in multiples. Now 20 different types of tooling plates and blocks, all finish ground, are available in each of the mini, standard and heavy sizes. Included are round, rectangular, square, platform, and angle tooling plates; and twosided, four-sided, and window tooling blocks. More than 200 new items are being introduced, including a large variety of

locators and mounting accessories, adding to what is already the most complete selection of modular components available. Multipurpose holes, which contain an alignment bushing and a threaded insert, have 1.0000" spacing and 5/16-18 threads on the mini size. Dual mounting capability allows both JIS mounting (locating from two reference edges) and DIN mounting (locating from center and radial holes) with excellent accuracy.

Modular fixturing is a valuable tool for every machine shop. Use for these applications: • One-time jobs • Short-notice production runs requiring rapid setup • Prototype parts which might be changed or redesigned • Jobs that do not repeat on a regular basis • Replacement parts • Trial fixturing • While permanent fixtures are being fixed or repaired.

STANDARD AND HEAVY SIZES ALSO AVAILABLE. ECONOMICAL STARTER SETS ARE OFFERED. MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

TEMPLATE INSTALLATION STEPS

1. LAY OUT HOLES

INSTALLATION TOOL

TRIM EDGE

RETAINER RING

When laying out holes, observe the minimum hole spacing and edge distance listed below: BUSHING A B OD MINIMUM MINIMUM 3/8 .60 .250 1/2 .73 .312 3/4 .98 .438

2. REAM AND COUNTERSINK REAMED HOLES .001 TO .003 LARGER THAN OD OF BUSHING

TEMPLATE FACE

TEMPLATE BUSHING

90°

APPLICATIONS: An economical bushing designed for thin template jig plates from 1/16- to 3/8-inch thick. Bushings are held in place by a retainer ring. The OD serrations prevent the bushing from spinning. Bushings can be removed and reused by breaking the aluminum retainer ring (extra retainer rings available). Bushing Retainer Ring

BUSHING

TEMPLATE BASE

FLUSH TO .015 Ream hole .001 to .003 larger than bushing OD. Countersink reamed hole to allow the bushing to seat .015 below flush with surface. For best results, use a piloted countersink tool so that the countersink is concentric and free of chatter marks.

3. INSTALL ORDER EXAMPLES: TB-24-6-4-.1250-TR-10 Bushing for 1/8" drill and 1/16"-thick template TB-24-6-4-.1250-TR-30 Bushing for 1/8" drill and 1/8"-thick template TB-24-6-4-.1250 Bushing only for 1/8" drill (if rings are ordered separately) Prices shown here apply to standard bushings only, for a standard drill size within the stated ID range. See back cover for decimal equivalents. To price non-standard sizes, including all reamer and tap-guide bushings, see page 7.

STANDARD ID TOLERANCES: #55 to 1/2"

+.0001/+.0011

1.30 to 12mm

CONCENTRICITY:

+.002/+.030mm

TOP SURFACE OF RETAINER RING

TOP EDGE OF BUSHING GROOVE TEMPLATE FACE

DRILL ENTRANCE +.005

PARALLEL -.010

TEMPLATE BASE

BUSHING CHAMFER MUST SEAT HERE

Install Retainer Ring with an arbor press whenever possible. The Installation Tool is also tapped for mounting on a rivet gun or other impact tool. Check that Retainer Ring top surface is within +.005 / -.010 of the bushing groove’s top edge before installing.

ID concentric with OD to within .002 TIR

MANUFACTURING CO. 58BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/94)

TEMPLATE

TEMPLATE BUSHINGS WITH RETAINER RINGS ID RANGE A

OD B

LGTH. C

GRIP D

TR-10 TR-20 TR-30 5/16 TB-24-6-5 TR-10 TR-30 5/16 TB-24-8-5 TR-10 TR-30 3/8 TB-24-8-6 TR-10 TR-30 7/16 TB-24-8-7 TR-10 TR-30 TR-40 1/4 TB-32-6-4 TR-50 TR-60 TR-40 5/16 TB-32-6-5 TR-60 TR-40 5/16 TB-32-8-5 TR-60 TR-40 3/8 TB-32-8-6 TR-60 TR-40 7/16 TB-32-8-7 TR-60 TR-40 1/2 TB-32-10-8 TR-60 TR-70 1/4 TB-48-6-4 TR-80 TR-90 TR-70 5/16 TB-48-6-5 TR-90 TR-70 5/16 TB-48-8-5 TR-90 TR-70 3/8 TB-48-8-6 TR-90 TR-70 7/16 TB-48-8-7 TR-90 TR-70 1/2 TB-48-10-8 TR-90 1/4

3/8

.0520-.1960 3/8 #55-#9 1.30-5.00mm .374-.373 1/2

3/8

+.002 +.005 MED. SERRATION B RADIUS B

1/2

5/8

+.000 D –.010

C .025 .030

.1960-.3160 1/2 #9-O .499-.498 5.00-8.00mm

B+.062

3/8 .050 .055

.3125-.5000 3/4 5/16-1/2 8.00-12.00mm .749-.748

1/2

5/8

QUANTITY PRICE

BUSHING RETAINER TEMPLATE PART RING THICKNESS 1-9 NO. PART NO.

1/16 3/32 1/8 1/8 3/16 1/8 3/16 3/16 1/4 1/4 5/16 1/16 3/32 1/8 1/8 3/16 1/8 3/16 3/16 1/4 1/4 5/16 5/16 3/8 1/16 3/32 1/8 1/8 3/16 1/8 3/16 3/16 1/4 1/4 5/16 5/16 3/8

TB-24-6-4

1024

2599

100499

500- 1000 999 & UP

2.33 1.98 1.86 1.75 1.68 1.63 2.33 1.98 1.86 1.75 1.68 1.63 2.40 2.04 1.92 1.80 1.73 1.68 2.40 2.04 1.92 1.80 1.73 1.68 2.40 2.04 1.92 1.80 1.73 1.68 2.54 2.16 2.03 1.91 1.83 1.78 2.54 2.16 2.03 1.91 1.83 1.78 2.83 2.41 2.26 2.12 2.04 1.98 2.83 2.41 2.26 2.12 2.04 1.98 2.83 2.41 2.26 2.12 2.04 1.98 2.83 2.41 2.26 2.12 2.04 1.98 3.29 2.80 2.63 2.47 2.37 2.30 3.29 2.80 2.63 2.47 2.37 2.30 3.73 3.17 2.98 2.80 2.69 2.61 3.73 3.17 2.98 2.80 2.69 2.61 3.73 3.17 2.98 2.80 2.69 2.61 3.73 3.17 2.98 2.80 2.69 2.61

EXTRA RETAINER RINGS +.000 H –.005

.005 CHAMFER .010 BOTH ENDS ID & OD

+.000 G –.003 +.003 F –.000

PART NO.

TR-10 TR-20 TR-30 TR-40 TR-50 TR-60 TR-70 TR-80 TR-90

F ID

G OD

.375

.468

.500

.593

.750 .843

.205 .173 .142 .205 .173 .142 .205 .173 .142

1-9

1024

QUANTITY PRICE 25100- 50099 499 999

1000 & UP

.82

.78

.75

.72

.70

.67

.91

.86

.84

.80

.77

.75

1.15

1.09

1.06

1.01

.98

.94

INSTALLATION TOOLS

L LENGTH

J HEX 5/16-24 TAP

PART NO.

FOR BUSHING SERIES

TBT-100 TBT-200 TBT-300

TB-24 TB-32 TB-48

FOR RING SERIES

TR-10,TR-20,TR-30 5/8 TR-40,TR-50,TR-60 3/4 TR-70,TR-80,TR-90 1

NET PRICE

COMPLETE SET PART NET NO. PRICE

1 10.44 1 13.92 TBT-400 34.75 1 17.45

MANUFACTURING CO. 59BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

CIRCUIT BOARD STEEL AND CARBIDE

CB APPLICATIONS:

Headless and head-type bushings made especially for circuit-board drilling machines. Available for ElectroMechano, Excellon, Waco, Digital, Nationwide, Edlund, Tektronix, Leland-Gifford, Palomar, Hughes, Rapidrill, and Reliable drilling machines.

CB-1 FOR ELECTROMECHANO

CB-2 ORDERING EXAMPLES: CB-1-.1250 CB-1C-.1250

Steel Bushing for 1/8" drill Carbide bushing for 1/8" drill

Prices shown here apply to standard bushings only, for a standard drill size within the stated ID range. See back cover.

SPECIALS: Bushings for other types of circuit-board drilling machines, including Hughes, Rapidrill, and Reliable, are available on request. Please contact factory.

STANDARD ID TOLERANCE (STEEL): #80 to 1/4

Nominal +.0001/+.0004

STANDARD ID TOLERANCE (CARBIDE): #80 to 1/4

FOR EXCELLON AND WACO

1-1/2 A DIA

10°

ID concentric with OD to within .0005 TIR maximum at drill exit end.

DRILL BEARING LENGTH: Standard drill bearing length is 1-1/2 times drill size on all types and sizes.

C 1/2

A 5/32 - #80 TO #41 ID 3/16 - #40 TO 11/64 ID COUNTERBORE: 1/8 - #80 TO 3/32 ID 3/16 - #41 TO 11/64 ID

B C 5/16

1-1/2 A DIA

.2516 .2513

.3749 .3747

B .031

CB-3 FOR DIGITAL

3/16 .032R

A 1-1/2 A DIA

.43 .422 .417

CB-4 FOR NATIONWIDE

17°

.094 .091

TYP. 3/16

1-1/2 A DIA

CB-5 FOR EDLUND AND TEKTRONIX

C .343

.093

A .3125 .3123

Nominal +.0003/+.0006

CONCENTRICITY:

.3125 .3123

B 3/16

.286 .281

46°

.355 .345

.191 .190

.500 .490 .255 C .245

A B

.3766 .3763

.500

CB-6

Great works are performed not by strength but by perseverance.

FOR LELANDGIFFORD

.160 .152

.375 46°

.313 C .308 A

1-1/2 A DIA

7/32

CB-7

+.000 –.010

.4232 .4228

.3750 .3748

1-1/2 A DIA

FOR PALOMAR

C .500

A .124 .122

.749 .746

MANUFACTURING CO. 60BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/94)

CIRCUIT BOARD STEEL AND CARBIDE TYPE

CB-1

TYPE

CB-2

TYPE

CB-3

TYPE

CB-4

TYPE

CB-5

TYPE

CB-6

TYPE

CB-7

ID RANGE DRILL SIZE “A”

#80-#78 #77-#70 #69-3/64 #55-1/16 #52-3/32 #41-9/64

.0135-.0179 .0180-.0291 .0292-.0519 .0520-.0634 .0635-.0959 .0960-.1406

ID RANGE DRILL SIZE “A”

#80-#79 1/64-#75 #74-1/32 #67-3/64 #55-#41 #40-9/64

.0135-.0155 .0156-.0224 .0225-.0319 .0320-.0519 .0520-.0979 .0980-.1406

ID RANGE DRILL SIZE “A”

#80-#78 #77-#70 #69-3/64 #55-1/16 #52-3/32 #41-9/64

.0135-.0179 .0180-.0291 .0292-.0519 .0520-.0634 .0635-.0959 .0960-.1406

ID RANGE DRILL SIZE “A”

#80-#78 #77-#70 #69-3/64 #55-1/16 #52-3/32 #41-9/64

.0135-.0179 .0180-.0291 .0292-.0519 .0520-.0634 .0635-.0959 .0960-.1406

ID RANGE DRILL SIZE “A”

#80-#78 #77-#70 #69-3/64 #55-1/16 #52-3/32 #41-9/64

.0135-.0179 .0180-.0291 .0292-.0519 .0520-.0634 .0635-.0959 .0960-.1406

ID RANGE DRILL SIZE “A”

#80-#78 #77-#70 #69-3/64 #55-1/16 #52-3/32 #41-9/64

.0135-.0179 .0180-.0291 .0292-.0519 .0520-.0634 .0635-.0959 .0960-.1406

ID RANGE DRILL SIZE “A”

#80-#78 #77-#70 #69-3/64 #55-1/16 #52-3/32 #41-9/64

.0135-.0179 .0180-.0291 .0292-.0519 .0520-.0634 .0635-.0959 .0960-.1406

STEEL QUANTITY PRICE

CARBIDE QUANTITY PRICE

Contact Factory

STEEL QUANTITY PRICE

CARBIDE QUANTITY PRICE

Contact Factory

STEEL QUANTITY PRICE

CARBIDE QUANTITY PRICE

Contact Factory

STEEL QUANTITY PRICE

CARBIDE QUANTITY PRICE

Contact Factory

STEEL QUANTITY PRICE

CARBIDE QUANTITY PRICE

Contact Factory

STEEL QUANTITY PRICE

CARBIDE QUANTITY PRICE

Contact Factory

STEEL QUANTITY PRICE

CARBIDE QUANTITY PRICE

Contact Factory

MANUFACTURING CO. 61BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

AIR FEED

ADAPTOR TIP ASSEMBLY

To mount air-feed drill, insert in liner and turn 30° counterclockwise to lock.

Collar

Shank (Press fit in Collar)

STANDARD AIR-FEED DRILLS

REDUCER (optional) p. 73

AIR-FEED-DRILL NOSEPIECE

SHANK p. 64-72

COLLAR p. 64-72

AT-TYPE ADAPTOR TIP p. 73

CONTOUR-NOSE SHANK p. 63

COOLANT-TYPE AIR-FEED DRILLS

COOLANT REDUCER (optional) p. 73

COOLANT-TYPE AIR-FEED-DRILL NOSEPIECE

COOLANT COLLAR p. 64-72

COOLANT SHANK p. 64-72

COOLANT-NOSE COOLANT SHANK p. 63

MOUNTING OPTIONS

TAPER-LOK® LINERS p. 74 New-design one-piece lock liner has angular locking surfaces for superior strength. Allows very close hole spacing. Hold in place with a lock nut. Also available knurled for installing in plastic tooling.

LOCK LINERS p. 74 Conventional lock liner incorporating two lock screws. Hold in place with a lock nut.

TAPER-LOK® AIR-FEED LOCKSCREWS p. 75 New-design lock screw especially for air-feed drills. Angular locking surface for superior strength. Install two lock screws and a liner directly in jig plate.

LOCKSCREWS p. 75

LOCK STRIPS p. 75

Conventional-style lock screws. Install two lock screws and a liner bushing directly in jig plate.

Allows the closest possible hole spacing. Use together with liner bushings.

MANUFACTURING CO. 62BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(12/03)

AIR FEED

ADAPTOR TIP ASSEMBLIES

APPLICATIONS: Drill-bushing shanks, collars, adaptors, and locking accessories for air-feed drills, tappers, and back-spotfacers. Available for all standard drill motors, including GardnerDenver, Keller, Aro, Buckeye, Quackenbush, Desoutter, and Ingersoll-Rand. Collar

21000 SERIES Shank Reducer

CONSTRUCTION: Adaptor-tip assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the air- feed-drill nosepiece, precisely aligns the shank, and locks the drill in place by rotating 30˚ counterclockwise after mounting. Shanks and collars can be ordered separately for replacement purposes.

ORDERING EXAMPLES: A-21101-.1250 Complete adaptor-tip assembly 21101-.1250 Shank only 21000 Collar only A-21101-.1250-C Complete assembly with contour nose 21101-.1250-C Shank only, with contour nose A-11101-.1250 Coolant-type assembly A-11101-.1250-C Coolant-type assembly with contour nose Prices shown here apply to standard bushings only, for a standard drill size within the stated ID range. See back cover for decimal equivalents. To price non-standard sizes, see page 7. All prices are net — no quantity discount.

STANDARD ID TOLERANCES: From #70 to 1/4" Over 1/4 to 3/4" Over 3/4 to 1-1/2"

+.0001/+.0004 +.0001/+.0005 +.0002/+.0006

AT-Type +.0000/+.0003 (See page 9 for reamer ID tolerances.)

From 1 to 3mm Over 3 to 6mm Over 6 to 10mm Over 10 to 18mm Over 18 to 30mm

.176 AT START .182 OF HELIX

3/4-16 UNF-2A L.H. THREAD 41/64 .8110 .8104

C 1/4

5/8 1" .4987 3/4 .4989 HOLE IN .250 COLLAR FOR SHANK COLLAR

1-14 NF-2A L.H. THREAD 1.0610 1.0604

.437

C 5/16

B .6238 1.00 .6240 HOLE IN COLLAR SHANK FOR SHANK

1-1/4-12 UNF-2A L.H. THREAD 1.3110 1.3104

.437

C 5/16

.9523 5° 07' .9525 1.00 HELIX HOLE IN ANGLE COLLAR SHANK FOR SHANK COLLAR

1.5610 1.5604

.166 AT START .176 OF HELIX .437

C 5/16

24000 SERIES

B 1.1703 1.00 4° 22' 1.1705 HELIX HOLE IN ANGLE COLLAR SHANK FOR SHANK COLLAR

OPTIONAL CONTOUR NOSE:

8°

Angular-nose shank recommended for close drilling along sloped or curved surfaces. Available on standard and coolant-type shanks. To order, add “-C” suffix to part number. Contact factory for pricing.

±1/64 A

1-1/2 1.922

45°

±1/64 A B

1-1/2-12 UNF-2A L.H. THREAD

2"-16 UNEF-2A L.H. THREAD 2.0610 2.0604

A B

COLLAR

1-1/4

1.672

5° 53' HELIX ANGLE

.158 AT START .168 OF HELIX

23000 SERIES

For coolant-inducing air-feed drills. Special shanks, collars, and reducers with internal coolant passages. Contact factory for pricing.

±1/64 A

3/4 1.422

OPTIONAL COOLANT TYPE:

5° B HELIX ANGLE SHANK

.166 AT START .174 OF HELIX

22000 SERIES

+.002/+.008mm +.004/+.012mm +.005/+.014mm +.006/+.017mm +.007/+.020mm

±1/64 A

.153 AT START .163 OF HELIX .437

25000 SERIES

C 5/16

±1/64

A B 1-3/4 2-5/8 1.7188 1.00 5° 1.7191 HELIX HOLE IN ANGLE COLLAR SHANK FOR SHANK COLLAR

MANUFACTURING CO. 63BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(8/98)

AIR FEED 21000 SERIES

A ID RANGE

SHANK ONLY

TIP ASSEMBLY B OD

.0938-.2500 3/8 3/32-1/4 .3748-.3745 2.40-6.35mm

.0938-.3125 7/16 3/32-5/16 .4373-.4370 2.40-7.90mm

.0938-.3750 1/2 3/32-3/8 .4998-.4995 2.40-9.50mm

C LENGTH

STANDARD TYPE PART NO.

COOLANT TYPE PART NO.

3/8 1/2 5/8 3/4 7/8 1 1-1/16 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 6 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3/8 1/2 5/8 3/4 7/8 1 1-1/16 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 5

A-21101 A-21102 A-21103 A-21104 A-21105 A-21106 A-16500 A-21108 A-21110 A-21111 A-21113 A-21114 A-21115 A-21116 A-21118 A-21119 A-21120 A-21121 A-21122 A-21124 A-21125 A-21126 A-21131 A-21202 A-21203 A-21204 A-21205 A-21206 A-21208 A-21210 A-21211 A-21213 A-21214 A-21215 A-21216 A-21218 A-21219 A-21220 A-21221 A-21222 A-21224 A-21225 A-21226 A-21301 A-21302 A-21303 A-21304 A-21305 A-21306 A-16501 A-21308 A-21310 A-21311 A-21313 A-21314 A-21315 A-21316 A-21318 A-21319 A-21320 A-21321 A-21322 A-21324 A-21325 A-21326 A-21330

A-11101 A-11102 A-11103 A-11104 A-11105 A-11106 A-11107 A-11108 A-11110 A-11111 A-11113 A-11114 A-11115 A-11116 A-11118 A-11119 A-11120 A-11121 A-11122 A-11124 A-11125 A-11126 A-11131 A-11202 A-11203 A-11204 A-11205 A-11206 A-11208 A-11210 A-11211 A-11213 A-11214 A-11215 A-11216 A-11218 A-11219 A-11220 A-11221 A-11222 A-11224 A-11225 A-11226 A-11301 A-11302 A-11303 A-11304 A-11305 A-11306 A-11307 A-11308 A-11310 A-11311 A-11313 A-11314 A-11315 A-11316 A-11318 A-11319 A-11320 A-11321 A-11322 A-11324 A-11325 A-11326 A-11330

COLLAR ONLY

AIR-FEED LOCK LINER PART NO. p. 74

LOCK LINER LOCK NUT PART NO. PART NO. p. 74 p. 74

AIR-FEED LOCKSCREW PART NO. p. 75

LOCK LINER SCREW PART NO. PART NO. p. 75 p. 75

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

COOLANT TYPE PART NO.

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

32.56 32.56 32.56 32.56 32.56 32.56 32.56 35.11 35.11 35.11 35.11 35.11 35.11 35.11 35.11 37.65 37.65 40.20 40.20 42.75 45.30 47.84 75.86 32.56 32.56 32.56 32.56 32.56 35.11 35.11 35.11 35.11 35.11 35.11 35.11 35.11 37.65 37.65 40.20 40.20 42.75 45.30 47.84 32.56 32.56 32.56 32.56 32.56 32.56 35.11 35.11 35.11 35.11 35.11 35.11 35.11 35.11 35.11 37.65 37.65 40.20 40.20 42.75 45.30 47.84 65.67

11101 11102 11103 11104 11105 11106 11107 11108 11110 11111 11113 11114 11115 11116 11118 11119 11120 11121 11122 11124 11125 11126 11131 11202 11203 11204 11205 11206 11208 11210 11211 11213 11214 11215 11216 11218 11219 11220 11221 11222 11224 11225 11226 11301 11302 11303 11304 11305 11306 11307 11308 11310 11311 11313 11314 11315 11316 11318 11319 11320 11321 11322 11324 11325 11326 11330

16.98 16.98 16.98 16.98 16.98 16.98 16.98 19.53 19.53 19.53 19.53 TLL-16520 A-16520 19.53 (Matches (Matches 19.53 19936 A-21106 A-16500 14441 19.53 tip) tip) 19.53 22.07 22.07 24.62 24.62 27.17 29.72 32.26 60.28 16.98 16.98 16.98 16.98 16.98 19.53 19.53 19.53 CL-11-AFL 19.53 or 19.53 21000 11000 15.58 CL-13-AFL 16531 19937 19.53 or 19.53 CL-14-AFL 19.53 22.07 22.07 24.62 24.62 27.17 29.72 32.26 16.98 16.98 16.98 16.98 16.98 16.98 19.53 19.53 19.53 19.53 TLL-16521 A-16521 19.53 (Matches (Matches 19938 14442 19.53 A-21306 A-16501 19.53 tip) tip) 19.53 19.53 22.07 22.07 24.62 24.62 27.17 29.72 32.26 50.09

21101 21102 21103 21104 21105 21106 16500 21108 21110 21111 21113 21114 21115 21116 21118 21119 21120 21121 21122 21124 21125 21126 21131 21202 21203 21204 21205 21206 21208 21210 21211 21213 21214 21215 21216 21218 21219 21220 21221 21222 21224 21225 21226 21301 21302 21303 21304 21305 21306 16501 21308 21310 21311 21313 21314 21315 21316 21318 21319 21320 21321 21322 21324 21325 21326 21330

COOLANT STANDARD TYPE TYPE PART NO. PRICE*

* Contact factory for pricing on coolant type.

MANUFACTURING CO. 64BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(3/05)

AIR FEED 22000 SERIES

A ID RANGE

SHANK ONLY

TIP ASSEMBLY B OD

.1875-.2812 7/16 3/16-9/32 .4373-.4370 4.80-7.10mm

.1875-.3438 1/2 3/16-11/32 4.80-8.70mm .4998-.4995

.1875-.4062 9/16 3/16-13/32 .5623-.5620 4.80-10.20mm

C LENGTH

STANDARD TYPE PART NO.

COOLANT TYPE PART NO.

3/8 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8

A-22101 A-22102 A-22103 A-22104 A-22105 A-22106 A-22108 A-22110 A-22111 A-22113 A-22114 A-22115 A-22116 A-22118 A-22119 A-22120 A-22121 A-22122 A-22124 A-22125 A-22126 A-22127 A-22128 A-22129 A-22130 A-22131 A-22202 A-22203 A-22204 A-22205 A-22206 A-22208 A-22210 A-22211 A-22213 A-22214 A-22215 A-22216 A-22218 A-22219 A-22220 A-22221 A-22222 A-22224 A-22225 A-22226 A-22227 A-22228 A-22229 A-22230 A-22231 A-22303 A-22304 A-22305 A-22306 A-22308 A-22310 A-22311 A-22313 A-22314 A-22315 A-22316

A-12101 A-12102 A-12103 A-12104 A-12105 A-12106 A-12108 A-12110 A-12111 A-12113 A-12114 A-12115 A-12116 A-12118 A-12119 A-12120 A-12121 A-12122 A-12124 A-12125 A-12126 A-12127 A-12128 A-12129 A-12130 A-12131 A-12202 A-12203 A-12204 A-12205 A-12206 A-12208 A-12210 A-12211 A-12213 A-12214 A-12215 A-12216 A-12218 A-12219 A-12220 A-12221 A-12222 A-12224 A-12225 A-12226 A-12227 A-12228 A-12229 A-12230 A-12231 A-12303 A-12304 A-12305 A-12306 A-12308 A-12310 A-12311 A-12313 A-12314 A-12315 A-12316

COLLAR ONLY

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

COOLANT TYPE PART NO.

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

39.42 39.42 39.42 39.42 39.42 39.42 42.58 42.58 42.58 42.58 42.58 42.58 42.58 42.58 45.73 45.73 48.89 48.89 52.04 55.20 58.36 61.51 64.67 67.82 80.45 93.07 39.42 39.42 39.42 39.42 39.42 42.58 42.58 42.58 42.58 42.58 42.58 42.58 42.58 45.73 45.73 48.89 48.89 52.04 55.20 58.36 61.51 64.67 67.82 80.45 93.07 39.42 39.42 39.42 39.42 42.58 42.58 42.58 42.58 42.58 42.58 42.58

12101 12102 12103 12104 12105 12106 12108 12110 12111 12113 12114 12115 12116 12118 12119 12120 12121 12122 12124 12125 12126 12127 12128 12129 12130 12131 12202 12203 12204 12205 12206 12208 12210 12211 12213 12214 12215 12216 12218 12219 12220 12221 12222 12224 12225 12226 12227 12228 12229 12230 12231 12303 12304 12305 12306 12308 12310 12311 12313 12314 12315 12316

21.04 21.04 21.04 21.04 21.04 21.04 24.20 24.20 24.20 24.20 24.20 24.20 24.20 24.20 27.35 27.35 30.51 30.51 33.66 36.82 39.98 43.13 46.29 49.44 62.07 74.69 21.04 21.04 21.04 21.04 21.04 24.20 22000 12000 18.38 24.20 24.20 24.20 24.20 24.20 24.20 24.20 27.35 27.35 30.51 30.51 33.66 36.82 39.98 43.13 46.29 49.44 62.07 74.69 21.04 21.04 21.04 21.04 24.20 24.20 24.20 24.20 24.20 24.20 24.20

22101 22102 22103 22104 22105 22106 22108 22110 22111 22113 22114 22115 22116 22118 22119 22120 22121 22122 22124 22125 22126 22127 22128 22129 22130 22131 22202 22203 22204 22205 22206 22208 22210 22211 22213 22214 22215 22216 22218 22219 22220 22221 22222 22224 22225 22226 22227 22228 22229 22230 22231 22303 22304 22305 22306 22308 22310 22311 22313 22314 22315 22316

COOLANT STANDARD TYPE TYPE PART NO. PRICE*

AIR-FEED LOCK LINER PART NO. p. 74

LOCK LINER LOCK NUT PART NO. PART NO. p. 74 p. 74

AIR-FEED LOCKSCREW PART NO. p. 75

LOCK LINER SCREW PART NO. PART NO. p. 75 p. 75

19937

CL-11-AFL or CL-13-AFL 16532 or CL-14-AFL

19938

19939

CONTINUED ON NEXT PAGE.

* Contact factory for pricing on coolant type.

MANUFACTURING CO. 65BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

AIR FEED 22000 SERIES (CONT.)

A ID RANGE

SHANK ONLY

TIP ASSEMBLY B OD

C LENGTH

STANDARD TYPE PART NO.

COOLANT TYPE PART NO.

2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 3/8 1/2 5/8 3/4 7/8 1 1-1/8 1-3/16 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6

A-22318 A-22319 A-22320 A-22321 A-22322 A-22324 A-22325 A-22326 A-22327 A-22328 A-22329 A-22330 A-22331 A-22401 A-22402 A-22403 A-22404 A-22405 A-22406 A-22408 A-16502 A-22410 A-22411 A-22413 A-22414 A-22415 A-22416 A-22418 A-22419 A-22420 A-22421 A-22422 A-22424 A-22425 A-22426 A-22427 A-22428 A-22429 A-22430 A-22431 A-22504 A-22505 A-22506 A-22508 A-22510 A-22511 A-22513 A-22514 A-22515 A-22516 A-22518 A-22519 A-22520 A-22521 A-22522 A-22524 A-22525 A-22526 A-22527 A-22528 A-22529 A-22530 A-22531

A-12318 A-12319 A-12320 A-12321 A-12322 A-12324 A-12325 A-12326 A-12327 A-12328 A-12329 A-12330 A-12331 A-12401 A-12402 A-12403 A-12404 A-12405 A-12406 A-12408 A-12409 A-12410 A-12411 A-12413 A-12414 A-12415 A-12416 A-12418 A-12419 A-12420 A-12421 A-12422 A-12424 A-12425 A-12426 A-12427 A-12428 A-12429 A-12430 A-12431 A-12504 A-12505 A-12506 A-12508 A-12510 A-12511 A-12513 A-12514 A-12515 A-12516 A-12518 A-12519 A-12520 A-12521 A-12522 A-12524 A-12525 A-12526 A-12527 A-12528 A-12529 A-12530 A-12531

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

COOLANT TYPE PART NO.

42.58 45.73 45.73 48.89 48.89 52.04 55.20 58.36 61.51 64.67 67.82 80.45 93.07 39.42 39.42 39.42 39.42 39.42 39.42 42.58 42.58 42.58 42.58 42.58 42.58 42.58 42.58 42.58 45.73 45.73 48.89 48.89 52.04 55.20 58.36 61.51 64.67 67.82 80.45 93.07 39.42 39.42 39.42 42.58 42.58 42.58 42.58 42.58 42.58 42.58 42.58 45.73 45.73 48.89 48.89 52.04 55.20 58.36 61.51 64.67 67.82 80.45 93.07

12318 12319 12320 12321 12322 12324 12325 12326 12327 12328 12329 12330 12331 12401 12402 12403 12404 12405 12406 12408 12409 12410 12411 12413 12414 12415 12416 12418 12419 12420 12421 12422 12424 12425 12426 12427 12428 12429 12430 12431 12504 12505 12506 12508 12510 12511 12513 12514 12515 12516 12518 12519 12520 12521 12522 12524 12525 12526 12527 12528 12529 12530 12531

COLLAR ONLY

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

COOLANT STANDARD TYPE TYPE PART NO. PRICE*

AIR-FEED LOCK LINER PART NO. p. 74

LOCK LINER LOCK NUT PART NO. PART NO. p. 74 p. 74

AIR-FEED LOCKSCREW PART NO. p. 75

LOCK LINER SCREW PART NO. PART NO. p. 75 p. 75

CONTINUED FROM PRECEDING PAGE.

.1875-.4062 9/16 3/16-13/32 .5623-.5620 4.80-10.20mm

.1875-.4688 5/8 3/16-15/32 .6248-.6245 4.80-11.80mm

.1875-.4688 3/4 3/16-15/32 .7498-.7495 4.80-11.80mm

22318 22319 22320 22321 22322 22324 22325 22326 22327 22328 22329 22330 22331 22401 22402 22403 22404 22405 22406 22408 16502 22410 22411 22413 22414 22415 22416 22418 22419 22420 22421 22422 22424 22425 22426 22427 22428 22429 22430 22431 22504 22505 22506 22508 22510 22511 22513 22514 22515 22516 22518 22519 22520 22521 22522 22524 22525 22526 22527 22528 22529 22530 22531

24.20 27.35 27.35 30.51 30.51 33.66 36.82 19939 39.98 43.13 46.29 49.44 62.07 74.69 21.04 21.04 21.04 21.04 21.04 21.04 24.20 24.20 24.20 24.20 24.20 24.20 24.20 TLL-16522 A-16522 19940 24.20 (MATCHES (MATCHES 24.20 A-22406 A-16502 14443 27.35 TIP) TIP) CL-11-AFL 27.35 or 30.51 CL-13-AFL 16532 30.51 22000 12000 18.38 or 33.66 CL-14-AFL 36.82 39.98 43.13 46.29 49.44 62.07 74.69 21.04 21.04 21.04 24.20 24.20 24.20 24.20 24.20 24.20 24.20 19941 24.20 27.35 27.35 30.51 30.51 33.66 36.82 39.98 43.13 46.29 49.44 62.07 74.69

* Contact factory for pricing on coolant type.

MANUFACTURING CO. 66BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

AIR FEED

The best thing about the future is that it comes only one day at a time. Abraham Lincoln

23000 SERIES

A ID RANGE

SHANK ONLY

TIP ASSEMBLY B OD

.2500-.5312 3/4 1/4-17/32 6.30-13.50mm .7498-.7495

.2500-.5938 13/16 1/4-19/32 .8123-.8120 6.30-15.00mm

C LENGTH

STANDARD TYPE PART NO.

COOLANT TYPE PART NO.

3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6

A-23104 A-23105 A-23106 A-23108 A-23110 A-23111 A-23113 A-23114 A-23115 A-23116 A-23118 A-23119 A-23120 A-23121 A-23122 A-23124 A-23125 A-23126 A-23127 A-23128 A-23129 A-23130 A-23131 A-23204 A-23205 A-23206 A-23208 A-23210 A-23211 A-23213 A-23214 A-23215 A-23216 A-23218 A-23219 A-23220 A-23221 A-23222 A-23224 A-23225 A-23226 A-23227 A-23228 A-23229 A-23230 A-23231

A-13104 A-13105 A-13106 A-13108 A-13110 A-13111 A-13113 A-13114 A-13115 A-13116 A-13118 A-13119 A-13120 A-13121 A-13122 A-13124 A-13125 A-13126 A-13127 A-13128 A-13129 A-13130 A-13131 A-13204 A-13205 A-13206 A-13208 A-13210 A-13211 A-13213 A-13214 A-13215 A-13216 A-13218 A-13219 A-13220 A-13221 A-13222 A-13224 A-13225 A-13226 A-13227 A-13228 A-13229 A-13230 A-13231

COLLAR ONLY

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

COOLANT TYPE PART NO.

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

23104 23105 23106 23108 23110 23111 23113 23114 23115 23116 23118 23119 23120 23121 23122 23124 23125 23126 23127 23128 23129 23130 23131 23204 23205 23206 23208 23210 23211 23213 23214 23215 23216 23218 23219 23220 23221 23222 23224 23225 23226 23227 23228 23229 23230 23231

13104 13105 13106 13108 13110 13111 13113 13114 13115 13116 13118 13119 13120 13121 13122 13124 13125 13126 13127 13128 13129 13130 13131 13204 13205 13206 13208 13210 13211 13213 13214 13215 13216 13218 13219 13220 13221 13222 13224 13225 13226 13227 13228 13229 13230 13231

24.97 24.97 24.97 28.72 28.72 28.72 28.72 28.72 28.72 28.72 28.72 32.46 32.46 36.21 36.21 39.95 43.70 47.44 51.19 54.93 58.68 73.66 88.64 24.97 23000 13000 18.83 24.97 24.97 28.72 28.72 28.72 28.72 28.72 28.72 28.72 28.72 32.46 32.46 36.21 36.21 39.95 43.70 47.44 51.19 54.93 58.68 73.66 88.64

43.80 43.80 43.80 47.55 47.55 47.55 47.55 47.55 47.55 47.55 47.55 51.29 51.29 55.04 55.04 58.78 62.53 66.27 70.02 73.76 77.51 92.49 107.47 43.80 43.80 43.80 47.55 47.55 47.55 47.55 47.55 47.55 47.55 47.55 51.29 51.29 55.04 55.04 58.78 62.53 66.27 70.02 73.76 77.51 92.49 107.47

COOLANT STANDARD TYPE TYPE PART NO. PRICE*

AIR-FEED LOCK LINER PART NO. p. 74

LOCK LINER LOCK NUT PART NO. PART NO. p. 74 p. 74

AIR-FEED LOCKSCREW PART NO. p. 75

LOCK LINER SCREW PART NO. PART NO. p. 75 p. 75

19942

CL-11-AFL or CL-13-AFL 16532 or CL-14-AFL

19943

* Contact factory for pricing on coolant type.

MANUFACTURING CO. 67BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

AIR FEED 23000 SERIES (CONT.)

A ID RANGE

SHANK ONLY

TIP ASSEMBLY B OD

C LENGTH

3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-7/16 1-1/2 1-5/8 1-3/4 1-7/8 .2500-.6562 2 7/8 1/4-21/32 6.30-16.50mm .8748-.8745 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 .2500-.7188 1 1/4-23/32 .9998-.9995 2-1/8 2-1/4 6.30-18.00mm 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 1-15/16 2 .2500-.7188 1-1/8 2-1/8 5/16-23/32 1.1248-1.1245 2-1/4 6.30-18.00mm 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6

STANDARD TYPE PART NO.

COOLANT TYPE PART NO.

A-23304 A-23305 A-23306 A-23308 A-23310 A-23311 A-16503 A-23313 A-23314 A-23315 A-23316 A-23318 A-23319 A-23320 A-23321 A-23322 A-23324 A-23325 A-23326 A-23327 A-23328 A-23329 A-23330 A-23331 A-23406 A-23408 A-23410 A-23411 A-23413 A-23414 A-23415 A-23416 A-23418 A-23419 A-23420 A-23421 A-23422 A-23424 A-23425 A-23426 A-23427 A-23428 A-23429 A-23430 A-23431 A-23506 A-23508 A-23510 A-23511 A-23513 A-23514 A-23515 A-23516 A-16504 A-23518 A-23519 A-23520 A-23521 A-23522 A-23524 A-23525 A-23526 A-23527 A-23528 A-23529 A-23530 A-23531

A-13304 A-13305 A-13306 A-13308 A-13310 A-13311 A-13312 A-13313 A-13314 A-13315 A-13316 A-13318 A-13319 A-13320 A-13321 A-13322 A-13324 A-13325 A-13326 A-13327 A-13328 A-13329 A-13330 A-13331 A-13406 A-13408 A-13410 A-13411 A-13413 A-13414 A-13415 A-13416 A-13418 A-13419 A-13420 A-13421 A-13422 A-13424 A-13425 A-13426 A-13427 A-13428 A-13429 A-13430 A-13431 A-13506 A-13508 A-13510 A-13511 A-13513 A-13514 A-13515 A-13516 A-13517 A-13518 A-13519 A-13520 A-13521 A-13522 A-13524 A-13525 A-13526 A-13527 A-13528 A-13529 A-13530 A-13531

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

COOLANT TYPE PART NO.

23304 23305 23306 23308 23310 23311 16503 23313 23314 23315 23316 23318 23319 23320 23321 23322 23324 23325 23326 23327 23328 23329 23330 23331 23406 23408 23410 23411 23413 23414 23415 23416 23418 23419 23420 23421 23422 23424 23425 23426 23427 23428 23429 23430 23431 23506 23508 23510 23511 23513 23514 23515 23516 16504 23518 23519 23520 23521 23522 23524 23525 23526 23527 23528 23529 23530 23531

13304 13305 13306 13308 13310 13311 13312 13313 13314 13315 13316 13318 13319 13320 13321 13322 13324 13325 13326 13327 13328 13329 13330 13331 13406 13408 13410 13411 13413 13414 13415 13416 13418 13419 13420 13421 13422 13424 13425 13426 13427 13428 13429 13430 13431 13506 13508 13510 13511 13513 13514 13515 13516 13517 13518 13519 13520 13521 13522 13524 13525 13526 13527 13528 13529 13530 13531

43.80 43.80 43.80 47.55 47.55 47.55 47.55 47.55 47.55 47.55 47.55 47.55 51.29 51.29 55.04 55.04 58.78 62.53 66.27 70.02 73.76 77.51 92.49 107.47 43.80 47.55 47.55 47.55 47.55 47.55 47.55 47.55 47.55 51.29 51.29 55.04 55.04 58.78 62.53 66.27 70.02 73.76 77.51 92.49 107.47 43.80 47.55 47.55 47.55 47.55 47.55 47.55 47.55 47.55 47.55 51.29 51.29 55.04 55.04 58.78 62.53 66.27 70.02 73.76 77.51 92.49 107.47

COLLAR ONLY

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

COOLANT STANDARD TYPE TYPE PART NO. PRICE*

AIR-FEED LOCK LINER PART NO. p. 74

LOCK LINER LOCK NUT PART NO. PART NO. p. 74 p. 74

AIR-FEED LOCKSCREW PART NO. p. 75

LOCK LINER SCREW PART NO. PART NO. p. 75 p. 75

24.97 24.97 24.97 28.72 28.72 28.72 28.72 28.72 28.72 28.72 TLL-16523 A-16523 28.72 (Matches (Matches 14445 19944 28.72 A-23310 A-16504 32.46 Tip) Tip) 32.46 36.21 36.21 39.95 43.70 47.44 51.19 54.93 58.68 73.66 88.64 24.97 28.72 28.72 28.72 28.72 28.72 28.72 28.72 CL-11-AFL 28.72 or 32.46 23000 13000 18.83 CL-13-AFL 16532 19945 32.46 or 36.21 CL-14-AFL 36.21 39.05 43.70 47.44 51.19 54.93 58.68 73.66 88.64 24.97 28.72 28.72 28.72 28.72 28.72 28.72 28.72 28.72 TTL-16524 A-16524 28.72 (Matches (Matches 14446 32.46 19946 A-23515 A-16504 32.46 Tip) Tip) 36.21 36.21 39.95 43.70 47.44 51.19 54.93 58.68 73.66 88.64

* Contact factory for pricing on coolant type.

MANUFACTURING CO. 68BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

AIR FEED Sports do not build character. They reveal it. John Wooden

24000 SERIES

A ID RANGE

SHANK ONLY

TIP ASSEMBLY B OD

.3125-.4062 5/8 5/16-13/32 .6248-.6245 8.00-10.20mm

.3125-.5312 3/4 5/16-17/32 8.00-13.50mm .7498-.7495

C LENGTH

STANDARD TYPE PART NO.

COOLANT TYPE PART NO.

5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6

A-24103 A-24104 A-24105 A-24106 A-24108 A-24110 A-24111 A-24113 A-24114 A-24115 A-24116 A-24118 A-24119 A-24120 A-24121 A-24122 A-24124 A-24125 A-24126 A-24127 A-24128 A-24129 A-24130 A-24131 A-24304 A-24305 A-24306 A-24308 A-24310 A-24311 A-24313 A-24314 A-24315 A-24316 A-24318 A-24319 A-24320 A-24321 A-24322 A-24324 A-24325 A-24326 A-24327 A-24328 A-24329 A-24330 A-24331

A-14103 A-14104 A-14105 A-14106 A-14108 A-14110 A-14111 A-14113 A-14114 A-14115 A-14116 A-14118 A-14119 A-14120 A-14121 A-14122 A-14124 A-14125 A-14126 A-14127 A-14128 A-14129 A-14130 A-14131 A-14304 A-14305 A-14306 A-14308 A-14310 A-14311 A-14313 A-14314 A-14315 A-14316 A-14318 A-14319 A-14320 A-14321 A-14322 A-14324 A-14325 A-14326 A-14327 A-14328 A-14329 A-14330 A-14331

COLLAR ONLY

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

COOLANT TYPE PART NO.

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

45.44 45.44 45.44 45.44 49.62 49.62 49.62 49.62 49.62 49.62 49.62 49.62 53.81 53.81 57.99 57.99 62.17 66.36 70.54 74.72 78.91 83.09 99.83 116.56 45.44 45.44 45.44 49.62 49.62 49.62 49.62 49.62 49.62 49.62 49.62 53.81 53.81 57.99 57.99 62.17 66.36 70.54 74.72 78.91 83.09 99.83 116.56

14103 14104 14105 14106 14108 14110 14111 14113 14114 14115 14116 14118 14119 14120 14121 14122 14124 14125 14126 14127 14128 14129 14130 14131 14304 14305 14306 14308 14310 14311 14313 14314 14315 14316 14318 14319 14320 14321 14322 14324 14325 14326 14327 14328 14329 14330 14331

27.89 27.89 27.89 27.89 32.07 32.07 32.07 32.07 32.07 32.07 32.07 32.07 36.26 36.26 40.44 40.44 44.62 48.81 52.99 57.17 61.36 65.54 82.28 99.01 24000 14000 17.55 27.89 27.89 27.89 32.07 32.07 32.07 32.07 32.07 32.07 32.07 32.07 36.26 36.26 40.44 40.44 44.62 48.81 52.99 57.17 61.36 65.54 82.28 99.01

24103 24104 24105 24106 24108 24110 24111 24113 24114 24115 24116 24118 24119 24120 24121 24122 24124 24125 24126 24127 24128 24129 24130 24131 24304 24305 24306 24308 24310 24311 24313 24314 24315 24316 24318 24319 24320 24321 24322 24324 24325 24326 24327 24328 24329 24330 24331

COOLANT STANDARD TYPE TYPE PART NO. PRICE*

AIR-FEED LOCK LINER PART NO. p. 74

LOCK LINER LOCK NUT PART NO. PART NO. p. 74 p. 74

AIR-FEED LOCKSCREW PART NO. p. 75

LOCK LINER SCREW PART NO. PART NO. p. 75 p. 75

19947

CL-11-AFL or CL-13-AFL 16532 or CL-14-AFL

19949

* Contact factory for pricing on coolant type.

MANUFACTURING CO. 69BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

AIR FEED 24000 SERIES (CONT.)

A ID RANGE

SHANK ONLY

TIP ASSEMBLY B OD

C LENGTH

7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 .3125-.6562 7/8 2-1/4 5/16-21/32 8.00-16.50mm .8745-.8748 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 .3125-.7812 1 5/16-25/32 .9998-.9995 2-1/4 2-3/8 8.00-19.50mm 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 1-15/16 2 .3125-.9062 1-1/8 5/16-29/32 1.1248-1.1245 2-1/8 2-1/4 8.00-23.00mm 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6

STANDARD TYPE PART NO.

COOLANT TYPE PART NO.

A-24405 A-24406 A-24408 A-24410 A-24411 A-24413 A-24414 A-24415 A-24416 A-24418 A-24419 A-24420 A-24421 A-24422 A-24424 A-24425 A-24426 A-24427 A-24428 A-24429 A-24430 A-24431 A-24506 A-24508 A-24510 A-24511 A-24513 A-24514 A-24515 A-24516 A-24518 A-24519 A-24520 A-24521 A-24522 A-24524 A-24525 A-24526 A-24527 A-24528 A-24529 A-24530 A-24531 A-24606 A-24608 A-24610 A-24611 A-24613 A-24614 A-24615 A-24616 A-16505 A-24618 A-24619 A-24620 A-24621 A-24622 A-24624 A-24625 A-24626 A-24627 A-24628 A-24629 A-24630 A-24631

A-14405 A-14406 A-14408 A-14410 A-14411 A-14413 A-14414 A-14415 A-14416 A-14418 A-14419 A-14420 A-14421 A-14422 A-14424 A-14425 A-14426 A-14427 A-14428 A-14429 A-14430 A-14431 A-14506 A-14508 A-14510 A-14511 A-14513 A-14514 A-14515 A-14516 A-14518 A-14519 A-14520 A-14521 A-14522 A-14524 A-14525 A-14526 A-14527 A-14528 A-14529 A-14530 A-14531 A-14606 A-14608 A-14610 A-14611 A-14613 A-14614 A-14615 A-14616 A-14617 A-14618 A-14619 A-14620 A-14621 A-14622 A-14624 A-14625 A-14626 A-14627 A-14628 A-14629 A-14630 A-14631

COLLAR ONLY

AIR-FEED LOCK LINER PART NO. p. 74

LOCK LINER LOCK NUT PART NO. PART NO. p. 74 p. 74

AIR-FEED LOCKSCREW PART NO. p. 75

LOCK LINER SCREW PART NO. PART NO. p. 75 p. 75

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

COOLANT TYPE PART NO.

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

45.54 45.54 49.62 49.62 49.62 49.62 49.62 49.62 49.62 49.62 53.81 53.81 57.99 57.99 62.17 66.36 70.54 74.72 78.91 83.09 99.83 116.56 45.44 49.62 49.62 49.62 49.62 49.62 49.62 49.62 49.62 53.81 53.81 57.99 57.99 62.17 66.36 70.54 74.72 78.91 83.09 99.83 116.56 45.44 49.62 49.62 49.62 49.62 49.62 49.62 49.62 49.62 49.62 53.81 53.81 57.99 57.99 62.17 66.36 70.54 74.72 78.91 83.09 99.83 116.56

14405 14406 14408 14410 14411 14413 14414 14415 14416 14418 14419 14420 14421 14422 14424 14425 14426 14427 14428 14429 14430 14431 14506 14508 14510 14511 14513 14514 14515 14516 14518 14519 14520 14521 14522 14524 14525 14526 14527 14528 14529 14530 14531 14606 14608 14610 14611 14613 14614 14615 14616 14617 14618 14619 14620 14621 14622 14624 14625 14626 14627 14628 14629 14630 14631

27.89 27.89 32.07 32.07 32.07 32.07 32.07 32.07 32.07 32.07 36.26 19950 36.26 40.44 40.44 44.62 48.81 52.99 57.17 61.36 65.54 82.28 99.01 27.89 32.07 32.07 32.07 32.07 32.07 32.07 32.07 CL-11-AFL 32.07 or 17.55 36.26 CL-13-AFL 16532 19951 36.26 24000 14000 or 40.44 CL-14-AFL 40.44 44.62 48.81 52.99 57.17 61.36 65.54 82.28 99.01 27.89 32.07 32.07 32.07 32.07 32.07 32.07 32.07 32.07 32.07 TLL-16525 A-16525 36.26 (Matches (Matches 36.26 14446 19946 A-24615 A-16505 40.44 Tip) Tip) 40.44 44.62 48.81 52.99 57.17 61.36 65.54 82.28 99.01

24405 24406 24408 24410 24411 24413 24414 24415 24416 24418 24419 24420 24421 24422 24424 24425 24426 24427 24428 24429 24430 24431 24506 24508 24510 24511 24513 24514 24515 24516 24518 24519 24520 24521 24522 24524 24525 24526 24527 24528 24529 24530 24531 24606 24608 24610 24611 24613 24614 24615 24616 16505 24618 24619 24620 24621 24622 24624 24625 24626 24627 24628 24629 24630 24631

COOLANT STANDARD TYPE TYPE PART NO. PRICE*

* Contact factory for pricing on coolant type.

MANUFACTURING CO. 70BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

AIR FEED 24000 SERIES (CONT.)

A ID RANGE

SHANK ONLY

TIP ASSEMBLY B OD

C LENGTH

1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 .3125-.9375 1-1/4 2-3/8 5/16-15/16 8.00-23.50mm 1.2498-1.2495 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 1 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 1-15/16 2 2-1/8 .3125-.9375 2-1/4 1-1/2 5/16-15/16 8.00-23.50mm 1.4998-1.4995 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6

STANDARD TYPE PART NO.

COOLANT TYPE PART NO.

A-24710 A-24711 A-24713 A-24714 A-24715 A-24716 A-24718 A-24719 A-24720 A-24721 A-24722 A-24724 A-24725 A-24726 A-24727 A-24728 A-24729 A-24730 A-24731 A-24806 A-24811 A-24813 A-24814 A-24815 A-24816 A-16506 A-24818 A-24819 A-24820 A-24821 A-24822 A-24824 A-24825 A-24826 A-24827 A-24828 A-24829 A-24830 A-24831

A-14710 A-14711 A-14713 A-14714 A-14715 A-14716 A-14718 A-14719 A-14720 A-14721 A-14722 A-14724 A-14725 A-14726 A-14727 A-14728 A-14729 A-14730 A-14731 A-14806 A-14811 A-14813 A-14814 A-14815 A-14816 A-14817 A-14818 A-14819 A-14820 A-14821 A-14822 A-14824 A-14825 A-14826 A-14827 A-14828 A-14829 A-14830 A-14831

A-25110 A-25111 A-25113 A-25114 A-25115 A-25116 A-25118 A-25119 A-25120 A-25121 A-25122 A-25124 A-25125 A-25126 A-25127 A-25128 A-25129 A-25130 A-25131

A-15110 A-15111 A-15113 A-15114 A-15115 A-15116 A-15118 A-15119 A-15120 A-15121 A-15122 A-15124 A-15125 A-15126 A-15127 A-15128 A-15129 A-15130 A-15131

COLLAR ONLY

AIR-FEED LOCK LINER PART NO. p. 74

LOCK LINER LOCK NUT PART NO. PART NO. p. 74 p. 74

AIR-FEED LOCKSCREW PART NO. p. 75

LOCK LINER SCREW PART NO. PART NO. p. 75 p. 75

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

COOLANT TYPE PART NO.

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

49.62 49.62 49.62 49.62 49.62 49.62 49.62 53.81 53.81 57.99 57.99 62.17 66.36 70.54 74.62 78.91 83.09 99.83 116.36 45.44 49.62 49.62 49.62 49.62 49.62 49.62 49.62 49.62 53.81 53.81 57.99 57.99 62.17 66.36 70.54 74.72 78.91 83.09 99.83

24710 24711 24713 24714 24715 24716 24718 24719 24720 24721 24722 24724 24725 24726 24727 24728 24729 24730 24731 24806 24811 24813 24814 24815 24816 16506 24818 24819 24820 24821 24822 24824 24825 24826 24827 24828 24829 24830 24831

14710 14711 14713 14714 14715 14716 14718 14719 14720 14721 14722 14724 14725 14726 14727 14728 14729 14730 14731 14806 14811 14813 14814 14815 14816 14817 14818 14819 14820 14821 14822 14824 14825 14826 14827 14828 14829 14830 14831

32.07 32.07 32.07 32.07 32.07 32.07 32.07 36.26 36.26 40.44 19952 40.44 44.62 48.81 52.99 57.17 61.36 65.54 CL-11-AFL 82.28 or 99.01 CL-13-AFL 16532 27.89 24000 14000 17.55 or 32.07 CL-14-AFL 32.07 32.07 32.07 32.07 32.07 32.07 32.07 TLL-16526 A-16526 36.26 (Matches (Matches 36.26 A-24815 A-16506 14447 40.44 Tip) Tip) 40.44 44.62 48.81 52.99 57.17 61.36 65.54 82.28

70.53 70.53 70.53 70.53 70.53 70.53 70.53 75.80 81.07 81.07 86.34 91.61 96.89 102.16 107.43 112.70 117.97 139.05 160.14

25110 25111 25113 25114 25115 25116 25118 25119 25120 25121 25122 25124 25125 25126 25127 25128 25129 25130 25131

COOLANT STANDARD TYPE TYPE PART NO. PRICE*

25000 SERIES

.3750-1.0312 1-1/4 3/8-1-1/32 9.50-26.00mm 1.2498-1.2495

1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6

15110 15111 15113 15114 15115 15116 15118 15119 15120 15121 15122 15124 15125 15126 15127 15128 15129 15130 15131

35.14 35.14 35.14 35.14 35.14 35.14 35.14 40.41 45.68 45.68 25000 15000 35.99 50.95 56.22 61.50 66.77 72.04 77.31 82.58 103.66 124.75

CL-12-AFL 16530 19953

* Contact factory for pricing on coolant type.

MANUFACTURING CO. 71BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

AIR FEED

25000 SERIES (CONT.)

A ID RANGE

SHANK ONLY

TIP ASSEMBLY B OD

.3750-1.1562 1-3/8 3/8-1-5/32 1.3748-1.3745 9.50-29.00mm

.3750-1.2812 1-1/2 3/8-1-9/32 1.4998-1.4995 9.50-32.00mm

.3750-1.4688 1-3/4 3/8-1-15/32 1.7498-1.7495 9.50-37.00mm

.3750-1.4688 2 3/8-1-15/32 1.9998-1.9995 9.50-37.00mm

C LENGTH

STANDARD TYPE PART NO.

COOLANT TYPE PART NO.

1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6 2 2-5/8 2-3/4 3 3-1/4 3-1/2 3-3/4 4 5 6

A-25211 A-25213 A-25214 A-25215 A-25216 A-25218 A-25219 A-25220 A-25221 A-25222 A-25224 A-25225 A-25226 A-25227 A-25228 A-25229 A-25230 A-25231 A-25313 A-25314 A-25315 A-25316 A-25318 A-25319 A-25320 A-25321 A-25322 A-25324 A-25325 A-25326 A-25327 A-25328 A-25329 A-25330 A-25331 A-25415 A-25416 A-25418 A-25419 A-25420 A-25421 A-25422 A-25424 A-25425 A-25426 A-25427 A-25428 A-25429 A-25430 A-25431 A-25518 A-16513 A-25524 A-25525 A-25526 A-25527 A-25528 A-25529 A-25530 A-25531

A-15211 A-15213 A-15214 A-15215 A-15216 A-15218 A-15219 A-15220 A-15221 A-15222 A-15224 A-15225 A-15226 A-15227 A-15228 A-15229 A-15230 A-15231 A-15313 A-15314 A-15315 A-15316 A-15318 A-15319 A-15320 A-15321 A-15322 A-15324 A-15325 A-15326 A-15327 A-15328 A-15329 A-15330 A-15331 A-15415 A-15416 A-15418 A-15419 A-15420 A-15421 A-15422 A-15424 A-15425 A-15426 A-15427 A-15428 A-15429 A-15430 A-15431 A-15518 A-15523 A-15524 A-15525 A-15526 A-15527 A-15528 A-15529 A-15530 A-15531

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

COOLANT TYPE PART NO.

70.53 70.53 70.53 70.53 70.53 70.53 75.80 81.07 81.07 86.34 91.61 96.89 102.16 107.43 112.70 117.97 139.05 160.14 70.53 70.53 70.53 70.53 70.53 75.80 81.07 81.07 86.34 91.61 96.89 102.16 107.43 112.70 117.97 139.05 160.14 70.53 70.53 70.53 75.80 81.07 81.07 86.34 91.61 96.89 102.16 107.43 112.70 117.97 139.05 160.14 70.53 86.34 91.61 96.89 102.16 107.43 112.70 117.97 139.05 160.14

15211 15213 15214 15215 15216 15218 15219 15220 15221 15222 15224 15225 15226 15227 15228 15229 15230 15231 15313 15314 15315 15316 15318 15319 15320 15321 15322 15324 15325 15326 15327 15328 15329 15330 15331 15415 15416 15418 15419 15420 15421 15422 15424 15425 15426 15427 15428 15429 15430 15431 15518 15523 15524 15525 15526 15527 15528 15529 15530 15531

25211 25213 25214 25215 25216 25218 25219 25220 25221 25222 25224 25225 25226 25227 25228 25229 25230 25231 25313 25314 25315 25316 25318 25319 25320 25321 25322 25324 25325 25326 25327 25328 25329 25330 25331 25415 25416 25418 25419 25420 25421 25422 25424 25425 25426 25427 25428 25429 25430 25431 25518 16513 25524 25525 25526 25527 25528 25529 25530 25531

COLLAR ONLY

STANDARD STANDARD TYPE TYPE PRICE* PART NO.

COOLANT STANDARD TYPE TYPE PART NO. PRICE*

35.14 35.14 35.14 35.14 35.14 35.14 40.41 45.68 45.68 50.95 56.22 61.50 66.77 72.04 77.31 82.58 103.66 124.75 35.14 35.14 35.14 35.14 35.14 40.41 45.68 45.68 50.95 56.22 61.50 66.77 72.04 25000 15000 35.99 77.31 82.58 103.66 124.75 35.14 35.14 35.14 40.41 45.68 45.68 50.95 56.22 61.50 66.77 72.04 77.31 82.58 103.66 124.75 35.14 50.95 56.22 61.50 66.77 72.04 77.31 82.58 103.66 124.75

AIR-FEED LOCK LINER PART NO. p. 74

LOCK LINER LOCK NUT PART NO. PART NO. p. 74 p. 74

AIR-FEED LOCKSCREW PART NO. p. 75

LOCK LINER SCREW PART NO. PART NO. p. 75 p. 75

19954

19955

CL-12-AFL 16530

19956

A-16533 (Matches 14448 A-16513 Tip)

* Contact factory for pricing on coolant type.

MANUFACTURING CO. 72BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

AIR FEED REDUCERS

E D B L.H. THREAD C

A L.H. THREAD

5/16 1/8 1 PART NO. PART NO. STANDARD COOLANT TYPE TYPE 17952 25018 25582 25583 20132 20017 27910

Available for either standard or coolanttype air-feed drills.

A-17952 A-25018 A-25582 A-25583 A-20132 A-20017 A-27910

A INSIDE THREAD 3/4-16

1-14 1-1/4-12 1-1/2-12

B OUTSIDE THREAD

C DIA

1-14 1-1/4-12 1-1/2-12 1-1/4-12 1-1/2-12 1-1/2-12 2-16

D DIA

1.0610-1.0604 1.3110-1.3104 1.5610-1.5604 1.3110-1.3104 1.0625 1.5610-1.5604 1.3125 1.5610-1.5604 1.5625 2.0610-2.0604 .8125

9/32

11/32 11/32 11/32

F DIA

STANDARD TYPE PRICE

COOLANT TYPE PRICE

1-3/8 1-5/8 1-15/16 1-5/8 1-15/16 1-15/16 2-1/2

1-1/16 1-5/16 1-9/16 1-5/16 1-9/16 1-9/16 2-1/16

53.57

Contact Factory

* Coolant type does not have wrench flats.

AT-TYPE ONE-PIECE ADAPTER TIPS

One-piece adapter tips for fiberglass and plastic tooling. These tips and liners are not ADAPTER TIP interchangeable with any other standard mounting accessories. Press-fit liners are also LOCK LINER available on request. EPOXY POTTING COMPOUND

AUTOMATIC FEED DRILL MOTOR LAMINATED FIBERGLASS

AT-TYPE ADAPTER TIPS PART NO.

C A B D

L.H. THREAD

ADAPTER TIP

A ID RANGE

B OD

AT-1

.1910-.2055 11/32 #11-#5 .3437-.3435

AT-2

.1910-.2850 7/16 #11-9/32 .4375-.4373

AT-3

.2810-.4130 9/16 K-Z .5625-.5623

AT-4

.2810-.6250 3/4 K-5/8 .7500-.7498

2-7/16

1-9/16

L.H. THREAD

LIST & QUANTITY PRICES 1-3

4-6

7-12

13-24 25-49

3/4-16 51.70 49.12 46.53 41.36 36.19

1-14

AT-TYPE LOCK LINERS PART NO.

D B A

F A

LOCK LINER

A ID

B OD

LL-1

11/32 9/16 .3440-.3443

LL-2

7/16 11/16 .4377-.4380

LL-3

9/16 13/16 .5627-.5630

LL-4

3/4 .7503-.7506

LIST & QUANTITY PRICES

F DIA

1-6

7-12

13-24

25-49

11/16

9.38

8.44

7.50

6.57

6.10

5.63

5.16

4.69

13/16

9.38

8.44

7.50

6.57

6.10

5.63

5.16

4.69

15/16

9.47

8.52

7.58

6.63

6.16

5.68

5.21

4.74

1-1/8

10.11

9.10

8.09

7.08

6.57

6.07

5.56

5.06

50-99 100-199 200-499 500-999

1-3/8 7/8

MANUFACTURING CO. 73BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

AIR FEED TAPER-LOK® LINERS

Patent No. 3,015,242

PART NO.

TLL-16520

TLL-16521

39/64 TLL-16522

C D

L B

STANDARD

L.H. TH’D.

TLL-16523 TLL-16524 TLL-16525

TLL-16526

PART NO.

A DIA .3750 .3755 .5000 .5005 .6250 .6255 .8750 .8756 1.1252 1.1258 1.5002 1.5008

B DIA .4995 .4990 .7495 .7490 .8745 .8740 1.2495 1.2490 1.4990 1.4985 1.9990 1.9985

STANDARD MATCHING MATCHING ADAPTOR LOCK TIP NUT

PRICE EACH

F DIA

L.H. THREAD

7/16

3/4

1-1/8

.625

3/4

1/2-20 14441 A-21106 18.00

7/16

3/4

1-3/16

.625

7/8

3/4-16 14442 A-21306 18.00

7/16

3/4

1-13/16 1.218 1-1/8

7/8-14 14443 A-22406 32.71

9/16

2-1/8

1.468 1-3/8 1-1/4 1-1/4-12 14445 A-23310 32.71

27/32

2-1/8 1.468 A-23515 32.71 1-5/8 1-3/4 1-1/2-12 14446 1-1/2 2-7/16 1.718 A-24615 32.71

27/32

1-1/2 2-7/16 1.718 2-1/8 1-3/4

14447 A-24815 36.11

2-16

KNURLED A

TLD-375

39/64 L

TLD-500

KNURLED

TLD-750

A DIA .3750 .3755 .5000 .5005 .7500 .7505

B DIA

F DIA

MATCHING ADAPTOR TIP

PRICE EACH

3/4

7/8

1-3/16

.625

7/8

1-1/8

A-21108

16.56

3/4

7/8

1-3/16

.625

7/8

1-1/8

A-21308

16.56

1-1/8

7/8

1-13/16

1.218

1-1/8

A-22508

30.56

B L.H. TH’D.

LOCK LINERS

L B A

PART NO. A-16520

H D STANDARD

A-16521 A-16522

L.H. TH’D. L B

A-16523 A-16524 A-16525

A-16526

C F

A-16533

A DIA .3750 .3756 .5000 .5006 .6250 .6256 .8750 .8756 1.1250 1.1260 1.1250 1.1260 1.5000 1.5010 2.0000 2.0015

B DIA .4995 .4989 .7495 .7489 .8745 .8739 1.2495 1.2485 1.4990 1.4980 1.4990 1.4980 1.9990 1.9980 2.4990 2.4980

MATCHING MATCHING ADAPTOR LOCK TIP NUT

PRICE EACH

F DIA

7/16

3/4

1-3/4

5/8

3/4

1-1/16

1/2-20 14441 A-16500 16.89

7/16

3/4

1-3/4

5/8

1-1/16

3/4-16 14442 A-16501 16.89

7/16

3/4

2-7/16

59/64 1-1/8 1-3/16

7/8-14 14443 A-16502 30.42

9/16

L.H. THREAD

2-11/16 1-3/64 1-1/2 1-7/16 1-1/4-12 14445 A-16503 30.42

27/32 1-1/2 2-11/16 1-3/64 1-3/4 1-15/16 1-1/2-12 14446 A-16504 30.42 27/32 1-1/2

1-11/64 1-3/4 1-15/16 1-1/2-12 14446 A-16505 30.42

27/32 1-1/2

1-11/64 2-1/2 1-15/16

1-3/8

3-3/4

1-9/16

—

2”-16

14447 A-16506 33.83

2-5/8 2-1/2-16 14448 A-16513 53.98

A-16533 ONLY

LOCK NUTS B

A L.H. TH’D.

LOCK NUT PART NO. 14441 14442 14443 14445 14446 14447 14448

A (THREAD SIZE) 1/2-20 3/4-16 7/8-14 1-1/4-12 1-1/2-12 2-16 2-1/2-16

3/4 1 1-1/4 1-3/4 2 2-1/2 3

1/4 1/4 1/4 3/8 1/2 1/2 1/2

PRICE EACH 2.94 3.00 3.61 4.61 5.74 6.74 12.88

MANUFACTURING CO. 74BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(1/05)

AIR FEED F

MOUNTING DIMENSIONS FOR LOCKSCREWS AND LOCK STRIPS

DIMENSION D E F

21000 23000 25000 22000 24000 SERIES SERIES SERIES SERIES SERIES .312 .734 — .609 .859 1.047 1.562 .922 1.172 .625 — .687 1.109 .984 1.234

TAPER-LOK® AIR-FEED LOCKSCREWS

A DIA. B DIA.

.165

7° .385 1-1/2 RAD

PART NO.

Angular locking surface mates perfectly with air-feed collars. Use instead of standard lockscrews for greater strength . . . eliminates worn, bent, or broken lockscrews caused by point contact. Serrations at bottom bite into the fixture plate to positively prevent rotation under heavy torque loads. Alloy steel mounting screws furnished. Patent No. 3,336,822.

CL-9-AFL CL-11-AFL CL-13-AFL CL-14-AFL CL-10-AFL CL-12-AFL

MOUNTING SCREW DIA

MOUNTING SCREW

REPLACES STANDARD PRICE EACH LOCKSCREW — — 2.13 — 19/32 16531 & 16532 2.16 5/8 19/32 3/16 1-3/32 3/4 2.42 — 1-19/32 1-1/4 2.42 — — 2.13 3/4 23/32 7/32 — 19/32 16530 2.16

B A DIA DIA

Not Furnished 5/16-18x1.00 5/16-18x1.50 w/Jam Nut 5/16-18x2.00 w/Jam Nut Not Furnished 3/8-16x1.00

5/16

3/8

LOCKSCREWS

LINERS

B C .197±.003 C

16531 16532 16530

B DIA

3/8

5/8

7/16

3/4

C 5/16 7/16 5/8

B PRICE THREAD EACH

B 5/16-18

19936 19937 19938 19939 19940 19947 19941 19942 19949 19943 19944 19950 19945 19951 19946 19952 19953 19954 19955 19956

A DIA

PART NO.

THREAD

PART NO.

11/32

JAM NUT FURNISHED ON SOME SIZES

.66

3/8-16

A ID 3/8 7/16 1/2 9/16 5/8 3/4

B OD 5/8 3/4 7/8

13/16 7/8

1-3/8

1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4

C PRICE LENGTH EACH 1 7.11 1

7.81

8.85

1-3/4 1 1-3/8 1-3/4

11.61 9.01 9.71 11.96

1-3/8

14.73

1-3/4 1-3/8 1-3/4

17.46 14.73 17.46

1-3/4

18.89

2-1/2

24.78

2-1/2

29.45

1-3/4

2-1/4

LOCK STRIPS 3/8 .125 .187 .192

3/8

C L 1-1/2 1-1/2

3/4 17/64 DRILL THRU

L PART NO. OVERALL NO. OF LENGTH HOLES 4 LSM-12 12 8 LSM-24 24 12 LSM-36 36

PRICE EACH 20.24 24.31 33.48

MANUFACTURING CO. 75BU

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(6/05)

USA DRILL SIZES Drill/Decimal Drill/Decimal 80 79 1/64 78 77 76 75 74 73 72 71 70 69 68 1/32 67 66 65 64 63 62 61 60 59 58 57 56 3/64 55 54 53 1/16 52 51 50 49 48 5/64 47 46 45 44 43 42 3/32 41 40 39 38 37 36 7/64 35 34 33 32 31 1/8 30 29 28

.0135 .0145 .0156 .0160 .0180 .0200 .0210 .0225 .0240 .0250 .0260 .0280 .0292 .0310 .0312 .0320 .0330 .0350 .0360 .0370 .0380 .0390 .0400 .0410 .0420 .0430 .0465 .0469 .0520 .0550 .0595 .0625 .0635 .0670 .0700 .0730 .0760 .0781 .0785 .0810 .0820 .0860 .0890 .0935 .0938 .0960 .0980 .0995 .1015 .1040 .1065 .1094 .1100 .1110 .1130 .1160 .1200 .1250 .1285 .1360 .1405

Drill/Decimal 23/64 .3594 U .3680 3/8 .3750 V .3770 W .3860 25/64 .3906 X .3970 Y .4040 13/32 .4062 Z .4130 27/64 .4219 7/16 .4375 29/64 .4531 15/32 .4688 31/64 .4844 1/2 .5000 33/64 .5156 17/32 .5312 35/64 .5469 9/16 .5625 37/64 .5781 19/32 .5938 39/64 .6094 5/8 .6250 41/64 .6406 21/32 .6562 43/64 .6719 11/16 .6875 45/64 .7031 23/32 .7188 47/64 .7344 3/4 .7500 49/64 .7656 25/32 .7812 51/64 .7969 13/16 .8125 53/64 .8281 27/32 .8438 55/64 .8594 7/8 .8750 57/64 .8906 29/32 .9062 59/64 .9219 15/16 .9375 61/64 .9531 31/32 .9688 63/64 .9844 1 1.0000

9/64 .1406 27 .1440 26 .1470 25 .1495 24 .1520 23 .1540 5/32 .1562 22 .1570 21 .1590 20 .1610 19 .1660 18 .1695 11/64 .1719 17 .1730 16 .1770 15 .1800 14 .1820 13 .1850 3/16 .1875 12 .1890 11 .1910 10 .1935 9 .1960 8 .1990 7 .2010 13/64 .2031 6 .2040 5 .2055 4 .2090 3 .2130 7/32 .2188 2 .2210 1 .2280 A .2340 15/64 .2344 B .2380 C .2420 D .2460 E .2500 1/4 .2500 F .2570 G .2610 17/64 .2656 H .2660 I .2720 J .2770 K .2810 9/32 .2812 L .2900 M .2950 +64th 19/64 .2969 increments up N .3020 to 1-7/8" 5/16 .3125 O .3160 +32nd P .3230 increments up 21/64 .3281 to 2-1/4" Q .3320 R .3390 +16th 11/32 .3438 increments up S .3480 to 4-1/4" T .3580

METRIC DRILL SIZES Drill/Decimal .35mm .38mm .40mm .42mm .45mm .48mm .50mm .55mm .60mm .65mm .70mm .75mm .80mm .85mm .90mm .95mm 1.00mm 1.05mm 1.10mm 1.15mm 1.20mm 1.25mm 1.30mm 1.35mm 1.40mm 1.45mm 1.50mm 1.55mm 1.60mm 1.65mm 1.70mm 1.75mm 1.80mm 1.85mm 1.90mm 1.95mm 2.00mm 2.05mm 2.10mm 2.15mm 2.20mm 2.25mm 2.30mm 2.35mm 2.40mm 2.45mm 2.50mm 2.55mm 2.60mm 2.65mm 2.70mm 2.75mm 2.80mm 2.90mm 3.00mm 3.10mm 3.20mm 3.25mm 3.30mm 3.40mm 3.50mm

.0138 .0150 .0157 .0165 .0177 .0189 .0197 .0217 .0236 .0256 .0276 .0295 .0315 .0335 .0354 .0374 .0394 .0413 .0433 .0453 .0472 .0492 .0512 .0531 .0551 .0571 .0591 .0610 .0630 .0650 .0669 .0689 .0709 .0728 .0748 .0768 .0787 .0807 .0827 .0846 .0866 .0886 .0906 .0925 .0945 .0965 .0984 .1004 .1024 .1043 .1063 .1083 .1102 .1142 .1181 .1220 .1260 .1280 .1299 .1339 .1378

Drill/Decimal 3.60mm 3.70mm 3.75mm 3.80mm 3.90mm 4.00mm 4.10mm 4.20mm 4.25mm 4.30mm 4.40mm 4.50mm 4.60mm 4.70mm 4.75mm 4.80mm 4.90mm 5.00mm 5.10mm 5.20mm 5.25mm 5.30mm 5.40mm 5.50mm 5.60mm 5.70mm 5.75mm 5.80mm 5.90mm 6.00mm 6.10mm 6.20mm 6.25mm 6.30mm 6.40mm 6.50mm 6.60mm 6.70mm 6.75mm 6.80mm 6.90mm 7.00mm 7.10mm 7.20mm 7.25mm 7.30mm 7.40mm 7.50mm 7.60mm 7.70mm 7.75mm 7.80mm 7.90mm 8.00mm 8.10mm 8.20mm 8.25mm 8.30mm 8.40mm 8.50mm 8.60mm

.1417 .1457 .1476 .1496 .1535 .1575 .1614 .1654 .1673 .1693 .1732 .1772 .1811 .1850 .1870 .1890 .1929 .1969 .2008 .2047 .2067 .2087 .2126 .2165 .2205 .2244 .2264 .2283 .2323 .2362 .2402 .2441 .2461 .2480 .2520 .2559 .2598 .2638 .2657 .2677 .2717 .2756 .2795 .2835 .2854 .2874 .2913 .2953 .2992 .3031 .3051 .3071 .3110 .3150 .3189 .3228 .3248 .3268 .3307 .3346 .3386

Drill/Decimal 8.70mm .3425 8.75mm .3445 8.80mm .3465 8.90mm .3504 9.00mm .3543 9.10mm .3583 9.20mm .3622 9.25mm .3642 9.30mm .3661 9.40mm .3701 9.50mm .3740 9.60mm .3780 9.70mm .3819 9.75mm .3839 9.80mm .3858 9.90mm .3898 10.00mm .3937 10.20mm .4016 10.50mm .4134 10.80mm .4252 11.00mm .4331 11.20mm .4409 11.50mm .4528 11.80mm .4646 12.00mm .4724 12.20mm .4803 12.50mm .4921 13.00mm .5118 13.50mm .5315 14.00mm .5512 14.50mm .5709 15.00mm .5906 15.50mm .6102 16.00mm .6299 16.50mm .6496 17.00mm .6693 17.50mm .6890 18.00mm .7087 18.50mm .7283 19.00mm .7480 19.50mm .7677 20.00mm .7874 20.50mm .8071 21.00mm .8268 21.50mm .8465 22.00mm .8661 22.50mm .8858 23.00mm .9055 23.50mm .9252 24.00mm .9449 24.50mm .9646 25.00mm .9843 +1.00mm increments up to 48mm +5.00mm increments from 50mm up to 105mm

TAP GUIDE SIZES (Priced as specials) Tap Guide Tap Size* Nominal ID Size Tap Drill Size** #0-80 .0616 3/64 #2-56 .0883 #50 #2-64 .0880 #50 #4-40 .1152 #43 #4-48 .1147 #42 #5-40 .1282 #38 #5-44 .1280 (3.25mm) #37 #6-32 .1421 #36 #6-40 .1412 #33 #8-32 .1681 #29 #8-36 .1676 #29 #10-24 .1954 #25 #10-32 .1941 #21 1/4-20 .2565 #7 1/4-28 .2546 #3 5/16-18 .3197 F 5/16-24 .3179 I 3/8-16 .3831 5/16 3/8-24 .3804 Q 7/16-14 .4468 U 7/16-20 .4440 25/64 1/2-13 .5100 27/64 1/2-20 .5065 29/64 9/16-12 .5733 31/64 9/16-18 .5697 33/64 5/8-11 .6368 17/32 5/8-18 .6322 37/64 3/4-10 .7630 21/32 3/4-16 .7581 11/16 7/8-9 .8894 49/64 7/8-14 .8843 13/16 1-8 1.0162 7/8 1-14 1.0093 15/16

METRIC M1.6x0.35 M2x0.4 M2.5x0.45 M3x0.5 M3.5x0.6 M4x0.7 M5x0.8 M6x1 M8x1.25 M8x1 M10x1.5 M10x1.25 M12x1.75 M12x1.25 M14x2 M14x1.5 M16x2 M16x1.5 M18x2.5 M18x1.5 M20x2.5 M20x1.5 M22x2.5 M22x1.5 M24x3 M24x2

.0651 .0810 (#46) .1008 .1207 .1407 .1613 .2010 (#7) .2410 .3214 .3197 .4009 .4002 .4805 .4789 .5600 .5584 .6387 .6372 .7191 .7159 .7978 .7946 .8765 .8734 .9583 .9537

1.25mm or #55 1.60mm or #52 2.05mm or #46 2.50mm or #39 2.90mm or #32 3.30mm or #30 4.20mm or #19 5.00mm or #8 6.80mm or H 7.00mm or J 8.50mm or R 8.80mm or 11/32 10.20mm or 13/32 10.80mm or 27/64 12.00mm or 15/32 12.50mm or 1/2 14.00mm or 35/64 14.50mm or 37/64 15.50mm or 39/64 16.50mm or 21/32 17.50mm or 11/16 18.50mm or 47/64 19.50mm or 49/64 20.50mm or 13/16 21.00mm or 53/64 22.00mm or 7/8

* Coarse series shown in bold. Pitch callout not required on metric coarse series. ** Closest size for 75% theoretical thread.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com