modular fixturing by steve hirzel

MODULAR FIXTURING

Authorized Distributor:

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

ALPHA-NUMERICAL INDEX BC CS DLT EC EX F FAC FH HTC KSA KSJ PC PD PPC RLT SA SAC SC SCH SHCS SHS SPC SSXX SSC TSB TSJ V WS 0001 0101 010X 015X 020X 030X 040X 045X 050X 060X 065X 070X 080X 080X 085X 090X 100X 110X 125X 141X 146X 15XX 160X

Block Push Clamps .........................................67 Clamp Straps .......................................52-53, 55 Diamond Locating Pins ...................................45 Edge Clamps...................................................67 Extending Clamps ...........................................67 Distribution Manifolds ......................................70 Forged Adjustable Clamps ..............................60 Fixture Hose ....................................................66 Horizontal Toggle Clamps ...............................65 Knob Shoe Assemblies ...................................64 Knurled Screw Jacks.......................................48 Push/Pull Toggle Clamps ................................65 Pallet Decouplers ...........................................70 Push/Pull Toggle Clamps ................................65 Round Locating Pins .......................................45 Standard-Adjustable Spindles .........................57 Serrated Adjustable Clamps ......................62-63 Swing Clamps .................................................68 Swing Clamps .................................................68 Socket-Head Cap Screws ...............................34 Swivel Head Screws........................................64 Push/Pull Toggle Clamps ................................65 Toolroom Starter Sets ................................10-15 Swivel Screw Clamps......................................64 Adjustable-Torque Thumb Screws...................64 Torque Screw Jacks ........................................49 Sequence Valves.............................................70 Work Supports ................................................69 Protection Plugs ..............................................35 Precision Bushings............................................5 Rectangular Tooling Plates, Regular ...............16 Rectangular Tooling Plates, Extra Long ..........17 Vertical Tooling Plates .....................................27 Round Tooling Plates ......................................18 Angle Plates, Tall .............................................29 Angle Tooling Plates........................................22 Angle Plates, Short .........................................29 Two-Sided Tooling Blocks................................23 Window Tooling Blocks....................................26 Four-Sided Tooling Blocks...............................24 Platform Tooling Plates....................................21 Square Pallet Tooling Plates ...........................19 Rectangular Pallet Tooling Plates....................20 Riser Plates .....................................................28 Pivoting Edge Clamps .....................................61 Downthrust Backstops.....................................61 Screw-Clamp Adaptors ...................................64 Support Riser Blocks.......................................37 Multipurpose Riser Blocks...............................37 Swing Clamp Assemblies................................58 Clamp Riser Blocks .........................................36

165X 180X 190X 200X 205X 210X 220X 230X 235X 240X 250X 260X 290X 31XX 315X 320X 330X 340X 350X 360X 370X 380X 390X 400X 410X 420X 430X 430X 431X 450X 460X 475X 480X 49XX 500X 501X 510X 520X 530X 540X 55XX 550X 550X 550X 550X 560X 570X 600X 610X 7XXX

Sideways Mounting Blocks..............................36 Adjustable Swing Stops...................................50 High-Rise Clamps, Adaptor Bases..................55 High-Rise Clamps, Tapped-Nose ....................54 High-Rise Clamps, Standard-Nose .................54 High-Rise Clamps, Gooseneck .......................54 High-Rise Clamps, Tapped-Nose ...................55 Narrow Riser Blocks........................................56 Spacer Blocks .................................................56 Support Holders ..............................................56 Swivel Contact Bolts........................................57 Contact-Bolt Extensions ..................................57 Adjustable Stops .............................................50 Support Cylinders............................................42 Relieved Support Cylinders.............................43 Shoulder Support Cylinders ............................43 Extension Supports .........................................38 Heavy-Duty Screw Jacks.................................48 Screw-Jack Tips ..............................................48 Halfway Extension Supports ...........................39 Edge Supports, Single ....................................41 Edge Supports, Double ...................................41 Spring-Stop-Button Adaptors ..........................51 Locating Gages ...............................................35 Locating-Pin Adaptors, Fixed ..........................44 Locating-Pin Adaptors, Adjustable ..................44 Locating Bushings ...........................................34 Locating Screws ..............................................34 Hex-Head Cap Screws....................................35 Locating Pins, Round ......................................35 Locating Pins, Diamond ..................................35 Multipurpose Extension Supports ...................39 Screw Rest Pads.............................................46 Quick-Change Tooling Plates ..........................25 Hook Clamps, Long-Arm.................................59 Hook Clamps, Tapped Long-Arm ....................59 Hook-Clamp Holders .......................................59 Riser Cylinders ................................................40 Up-Thrust Clamps ...........................................58 Toggle-Clamp Adaptors...................................65 Pallet Decoupler Adaptors...............................70 Clamp Adaptors...............................................67 Manifold-and-Valve Adaptors ..........................70 Swing-Clamp Adaptors....................................68 Work Support Adaptors...................................69 Cam Edge Clamps ..........................................60 Manual Work Supports....................................49 Horizontal V Blocks .........................................47 Vertical V Blocks..............................................46 Height Shims ...................................................40

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 1MF (Rev. 8-94)

INTRODUCTION What exactly is modular fixturing? In many ways modular fixturing is just like permanent fixturing, except for a few key differences. First, modular fixtures can be assembled entirely from reusable off-the-shelf components, without machining. Next, many modular components are adjustable and universal. Finally, specially designed tooling plates and blocks, with a standard grid pattern, are the foundation of a good modular system.

GRID HOLES VS. EARLIER T-SLOT SYSTEMS: The two primary forms of modular systems available today are those with grid-pattern holes and earlier types with T slots to mount components. Grid holes offer many advantages over T slots. Modular systems with grid holes have greater positional accuracy and strength than those with T slots. T-slot systems permit movement along the slot, so nothing but friction holds components in place. Wherever T slots cross each other, a weak point exists.

MULTIPURPOSE GRID HOLES OFFER MAXIMUM FLEXIBILITY: Grid-pattern modular-fixturing systems come in two styles: those with alternating dowel holes and tapped holes and those with multipurpose holes. The alternating-hole style does not offer as many advantages as the Carr Lane multipurpose-hole style. Multipurpose holes have both an alignment bushing and threaded insert in the same hole. This arrangement permits each hole to serve as an alignment hole, mounting hole, or both. Multipurpose holes are laid out in a standard 1" or 2" grid pattern (depending on the size) to allow the maximum number of mounting locations. Locating Screw Precision Bushing

A VALUABLE TOOL FOR EVERY MACHINE SHOP: Most metal-machining manufacturers have good applications for temporary fixturing every day! The leadtime and expense required to build a permanent fixture are often difficult to justify. This is especially true when production runs are small and do not repeat on a regular basis. General-purpose workholders â&#x20AC;&#x201D; such as vises, chucks, and table mounted clamps â&#x20AC;&#x201D; can be ready for production on short notice, but they are primarily suited for short runs of basic parts. Fortunately, there is now another alternative: modular fixturing. When a company adds modular fixturing to its options, even job-shop-type production can benefit from quality fixturing.

GOOD APPLICATIONS FOR MODULAR FIXTURING: Modular fixturing is an ideal answer to many workholding problems. One-time jobs, found especially in job shops, are ideal for modular fixturing; with modular fixturing, a workholder can be economically built even for a one-part run. Jobs that do not repeat on a regular basis are well suited to modular fixturing; modular fixturing permits rapid setup of short-notice production runs. Modular fixturing is also ideal for prototype parts; since prototypes are often changed or redesigned, the cost of building a permanent fixture for each new variation would be prohibitive. Replacement parts are another perfect application; modular fixturing allows a company to respond to orders as they are received, instead of shipping parts from an inventory. Trial fixturing is also an excellent application; modular workholders allow a designer to fine tune tooling ideas before a final production workholder is built. Finally, modular fixturing is valuable while permanent fixtures are built or repaired.

THE WIDEST SELECTION OF TOOLING PLATES & BLOCKS: Tooling plates and blocks are the main structural elements of any modular-fixturing system. The type, style, and number of plates and blocks available determine the variety of fixtures that can be built, and also the number of machine tools that can be used. The Carr Lane modular system has the largest selection of tooling plates and blocks available anywhere.

Threaded Insert

POWER WORKHOLDING CAPABILITY: The ability to use hydraulic power workholding is another consideration in the selection of a modular-workholding system. A modular system should treat power workholding as an integral part of the complete fixturing plan. Instead of requiring special power components, a good modular system uses standard, off-the-shelf power workholding components. Adapting standard power components to modular workholders both reduces cost and expands design options. SWIFTSURE power clamps and work supports are the finest available, and work hand-inhand with the Carr Lane modular system. Also, our HILMA precision hydraulic vises work perfectly with modular tooling plates and blocks.

CHOICE OF THREE SYSTEM SIZES: A good modular fixturing system needs to accommodate a wide range of workpiece sizes. Only Carr Lane offers a full line of modular components in three system sizes. As a comparison to choose the proper system size, the table below shows typical clamping force exerted by clamp straps in each size (2-to-1 lever ratio).

Mini 5/16-18

SIZE MINI STANDARD HEAVY

Standard 1/2-13 STUD SIZE 5/16-18 1/2-13 5/8-11

RECOMMENDED TORQUE (FT-LBS) 9 38 77

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Heavy 5/18-11 CLAMPING FORCE (LBS) 900 2300 3700

Page 2MF (Rev. 7-02)

PICTORIAL INDEX TOOLING PLATES & BLOCKS

Rectangular p. 16-17

Two-Sided Blocks p. 23

Round p. 18

Four-Sided Blocks p. 24

Rectangular Pallet p. 20

Square Pallet p. 19

Quick-Change Plates p. 25

Window Tooling Blocks p. 26

Angle p. 22

Platform p. 21

Riser Plates p. 28

Vertical Plates p. 27

Angle Plates p. 29

MOUNTING ACCESSORIES

Locating Screws and Bushings p. 34

Socket-Head Cap Screws p. 34

Locating Pins p. 35

Locating Gages p. 35

Hex-Head Cap Screws p. 35

Protection Plugs p. 35

Height Shims p. 40

Riser Cylinders p. 40

SUPPORTS & LOCATORS

Clamp Riser Blocks p. 36

Edge Supports p. 41

Screw Jacks p. 48-49

Sideways Mounting Blocks p. 36

Extension Supports p. 38-39

Support Riser Blocks p. 37

Locating-Pin Adaptors p. 44-45

Support Cylinders p. 42-43

Manual Work Supports p. 49

Screw Rest Pads p. 46

Adjustable Stops p. 50

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

V Blocks p. 46-47

Stop-Spring-Button Adaptors p. 51

Page 3MF (Rev. 7-02)

PICTORIAL INDEX CLAMPS

Slotted-Heel Clamp Straps p. 52

Up-Thrust Clamps p. 58

Cam Edge Clamps p. 60

Double-End Clamp Straps p. 53

High-Rise Clamps p. 54-56

Contact Bolts p. 57

Hook Clamps p. 59

Forged Adjustable Clamps p. 60

Swing Clamp Assemblies p. 58

Pivoting Edge Clamps p. 61

Serrated Adjustable Clamps p. 62-63

Toggle-Clamp Adaptors p. 65

Screw Clamp Adaptors p. 64

POWER WORKHOLDING

Power Units p. 66

Swing Clamps p. 68

Fixture Hose and Accessories p. 66

Work Supports p. 69

Extending Clamps p. 67

Distribution Manifolds p. 70

Edge Clamps p. 67

Block Push Clamps p. 67

Pallet Decouplers p. 70

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Sequence Valves p. 70

Page 4MF (Rev. 4-93)

TECHNICAL INFORMATION MULTIPURPOSE HOLES

Mini

Standard

Heavy

Every multipurpose hole on a tooling plate or block has a precision alignment bushing on top, with a threaded insert below it. Multipurpose holes will accept Locating Screws, socket-head cap screws, studs, and many other threaded components. The proper mounting screw for each component is listed in its table of dimensions. Locating screws are used to locate and fasten at the same time. Note: mini-size systems use a Locating Bushing together with a socket-head cap screw for extra strength, instead of a Locating Screw.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 5MF (Rev. 8-98)

TECHNICAL INFORMATION GRID ADDRESS SYSTEM

Mini

Standard

Heavy

The grid pattern of multipurpose holes on every tooling plate and tooling block face is labelled with letters in one direction and numbers in the perpendicular direction. Tooling-block faces are numbered (counterclockwise) with Roman numerals. This allows recording the mounting-hole location of each component (e.g., A2, B3, D7, etc.) as part of permanent documentation. See the bill-of-material sheet on page 9 as a sample. Multipurpose holes are spaced within ±.0008 inches of true position on all tooling plates and blocks. The mini system is even more accurate, with all holes spaced within ±.0004 inches.

CUSTOM TOOLING PLATES

Precision Bushing

To build your own custom tooling plates with multipurpose mounting holes, we offer precision bushings and threaded inserts separately. See hole locations and tolerances above (holes must be jig bored), and page 4 for proper counterbore depth to install bushings. The threaded insert’s locking keys can be driven down by the bushing as it is pressed into the tooling plate.

PRECISION BUSHINGS SIZE MINI STANDARD HEAVY

PART NO. CL-MF25-0101-02 CL-MF40-0101-02 CL-MF50-0101-02

ID .5003/.5005 .5006/.5013 .6256/.6263

OD .6247/.6244 .8122/.8119 .9060/.9056

LENGTH .312 .500 .625

KEY INSERTS

Key Insert SIZE MINI STANDARD HEAVY

PART NO. CL-51618-KS CL-1213-KS CL-5811-KS

ID THREAD 5/16-18 1/2-13 5/8-11

OD THREAD 1/2-13 3/4-16 7/8-14

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

LENGTH 7/16 5/8 7/8

Page 6MF (Rev. 7-02)

TECHNICAL INFORMATION MOUNTING TOOLING PLATES ON T-SLOTTED TABLES

Standard and Heavy Standard and heavy Rectangular Tooling Plates are accurately located on T-slotted tables using two Locating Keys (page 156 of tooling-component catalog section) in the center table slot. These plates are fastened to the machine table using four or six socket-head cap screws (page 34) and T Nuts (page 193 of toolingcomponent catalog section). Swivel Hoist Rings are recommended for lifting large tooling plates (page 30 of tooling-component catalog section).

Mini Only Mini-size Rectangular Tooling Plates are accurately located on T-slotted tables using two Sure-Lock Fixture Keys (page 155 of tooling-component catalog section) in the center table slot. These plates are normally fastened to the machine table using two or three sockethead cap screws (page 34) and T Nuts (page 193 of tooling-component catalog section). Alternatively, four Forged Adjustable Clamps (page 207 of toolingcomponent catalog section) can be used for greater holding force.

MOUNTING TOOLING PLATES ON SUBPLATES

Mini, Standard, and Heavy All Rectangular Tooling Plates can be mounted as quick-change fixture plates on a subplate, as well as directly on a T-slotted machine table. Instead of the Locating Keys and Sure-Lock Fixture Keys used above for two-axis location, Subplate Locating Keys (page 156 of tooling-component catalog section) are used for three-axis location. A round key and a diamond (relieved) key are used together for precise location without binding. The subplate hole pattern shown here allows mounting any size and combination of standard or heavy Rectangular Tooling Plates, either lengthwise or widthwise.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 7MF (Rev. 7-02)

TECHNICAL INFORMATION MOUNTING TOOLING PLATES & BLOCKS ON PALLETS

Socket-Head Cap Screw

JIS Mounting JIS-type mounting is the most-common way to mount tooling plates and blocks on a machining-center pallet. Here the plate or block is located from two precisely ground reference edges at 90째 to each other. The plate or block is pulled against the pallet's edge locators using three socket-head cap screws (page 34) and also fastened down with four to eight socket-head cap screws, depending on the size. Swivel Hoist Rings are recommended for lifting tooling blocks and large tooling plates (page 30 of tooling-component catalog section).

Edge Locator

Edge Locator Socket-Head Cap Screw

Machine Pallet

DIN Mounting

Socket-Head Cap Screws

Pallet Fixture Key (Radial)

Most of our modular tooling plates and blocks also incorporate DIN-mounting capability. Here the plate or block is located using a center hole, and oriented using a radial hole. Two Pallet Fixture Keys, a center pin and a radial pin, are required (page 157 of toolingcomponent catalog section). The plate or block is fastened down with four to eight socket-head cap screws, depending on the size.

PALLET PALLET DISTANCE PALLET CENTER-HOLE RADIAL-HOLE BETWEEN CENTER DIA DIA SIZE AND RADIAL HOLES 100mm 320mm 150mm 20mm 400mm 200mm 50mm 500mm 200mm 630mm 25mm 300mm 800mm

Pallet Fixture Key (Center)

Machine Pallet

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 8MF (Rev. 10-92)

TECHNICAL INFORMATION FIXTURE DESIGN AND DOCUMENTATION

The tool-design process for modular fixtures is basically the same as for permanent fixtures, with a few differences. There are generally three ways to design a modular fixture: 1. Designing by actually building the fixture 2. Preparing manual drawings 3. Using a CAD system The first method, designing by building, is possible because modular fixtures require only assembly to put them together, not machining. Once you have a rough design concept in mind, you can go straight to assembling pieces instead of drawing them first. Instead of documenting fixtures with detailed drawings, you would use instant photos along with your concept sketch and bill of material. Carr Lane customers are authorized to photocopy the bill-ofmaterial sheet on page 9 for their own internal use as modular-fixturing documentation. The second method, preparing manual drawings, can be speeded up by using tracing templates. These are available for both modular and permanent fixture components.

Typical 3-D CAD drawing

The third way to design a modular fixture is with a CAD system. Actually, CAD is a way to combine the best features of the first two methods. Instead of building the fixture with actual parts to create a design, you can “build” it on the computer. This is especially true if you work on a 3-dimensional system. Designing with CAD lets you automatically prepare documentation such as tool drawings and bills of material. Modular-fixturing items are included in our Tool Designer’s Assistant® tooling component CAD/CAM library, to help speed up the CAD design process.

MODULAR FIXTURING HANDBOOK

For more information on modular fixturing, Carr Lane offers an excellent 216-page reference book. Our Modular Fixturing Handbook contains the following:

• An introduction to modular fixturing • Fundamentals of jig and fixture design • Detailed application information on all modular-fixturing components • Typical modular-fixturing design process • Examples of actual modular fixtures • Power workholding on modular fixtures Please contact your Carr Lane distributor.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

MODULAR FIXTURING BILL OF MATERIAL Part Number: _______________________________________ Part Description: _____________________________________________________________________________ Tool Number: ___________________________ Machine:____________________________ Prepared by: ______________________________ Date: ___________________ Special Instructions: _____________________________________________________________________________________________________________________________ MOUNTING SCREWS QTY

PART NO.

DESCRIPTION

TOTAL QTY

MOUNTING SCREW PART NO.

HOLE COORDINATES A1, A2, B1, ETC.

Page 10MF (Rev. 9-95)

TOOLROOM STARTER SETS

BASIC STARTER SET Economical starter sets to build one fixture at a time on a typical milling machine. This set includes matching sizes of our most-popular components, plus all necessary mounting screws. Order a tooling plate and Locating Keys separately to fit specific machines. For a complete listing of components, see pages 13-15.

UAL D I V INDI RDERED F F O O 10% S WHEN SETS! E E PRIC N THES I

ONE-FIXTURE SETS SIZE MINI STANDARD HEAVY

PART NO. CL-MF25-SS1B CL-MF40-SS1B CL-MF50-SS1B

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

NUMBER OF PIECES 533 481 411

Page 11MF (Rev. 8-94)

TOOLROOM STARTER SETS

COMPLETE STARTER SET Comprehensive starter sets that allow fixturing almost any part. The one-fixture set (shown above) is ideal for building any one fixture at a time on most milling machines and machining centers. The four-fixture set (not shown) contains enough of most components to build four identical fixtures, ideal for tooling blocks on horizontal machining centers. Order tooling plates, tooling blocks, and Locating Keys separate-ly to fit specific machines. For a complete listing of components, see pages 1315.

L DUA D I V I IND RDERE F F O O 10% S WHEN SETS! E E PRIC N THES I

ONE-FIXTURE SETS SIZE MINI STANDARD HEAVY

PART NO. CL-MF25-SS1C CL-MF40-SS1C CL-MF50-SS1C

NUMBER OF PIECES 1196 1161 892

FOUR-FIXTURE SETS MINI STANDARD HEAVY

CL-MF25-SS4C CL-MF40-SS4C CL-MF50-SS4C

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

3275 3076 2428

Page 12MF (Rev. 8-94)

TOOLROOM STARTER SETS

POWER-WORKHOLDING ADD-ON SET Adds power-workholding capability to the starter sets shown on the previous two pages. These fully reusable hydraulic components include clamps, work supports, valves, fixture hoses, fittings, and other accessories. The one-fixture add-on set adds power to either the one-fixture basic starter set, or the one-fixture complete starter set. The four-fixture add-on set (not shown) complements the four-fixture complete starter set. Order hydraulic power unit separately (see SWIFTSURE catalog section.) For a complete list of components, see pages 13-15.

ONE-FIXTURE SETS

UAL D I V INDI RDERED F F O O 10% S WHEN SETS! E E PRIC N THES I

SIZE MINI STANDARD HEAVY

PART NO. –– CL-MF40-SS1P CL-MF50-SS1P

NUMBER OF PIECES –– 307 238

FOUR-FIXTURE SETS MINI STANDARD HEAVY

–– CL-MF40-SS4P CL-MF50-SS4P

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

–– 932 704

Page 13MF (Rev. 8-98)

TOOLROOM STARTER SETS —

— — —

STANDARD CL-MF40-0511 CL-MF40-0512

— —

2 2

4 2

— — — —

HEAVY

CL-MF50-0501 CL-MF50-0502

— —

2 2

4 2

— — — —

MINI

CL-MF25-0900

—

— —

Contact-Bolt Extensions

Angle Plates

Riser Plates

—

— — —

HEAVY

—

— — —

MINI

—

— — —

—

— —

—

— —

—

— — —

—

— —

—

— —

STANDARD CL-MF40-1001 Pivoting Edge Clamps

HEAVY MINI

CL-MF50-1001 —

STANDARD CL-MF40-1101 Downthrust Backstops

Screw-Clamp Adaptors

Support Riser Blocks

Multipurpose Riser Blocks

HEAVY

CL-MF50-1101

MINI

CL-MF25-1251

12 — —

STANDARD CL-MF40-1251

12 — —

CL-MF50-1251

12 — —

CL-MF25-1411 CL-MF25-1412 MINI CL-MF25-1413 CL-MF25-1414 CL-MF40-1411 STANDARD CL-MF40-1412 CL-MF40-1413 CL-MF40-1414 CL-MF50-1411 CL-MF50-1412 HEAVY CL-MF50-1413 CL-MF50-1414 CL-MF25-1461 MINI CL-MF25-1462 STANDARD CL-MF40-1462 CL-MF40-1463 HEAVY CL-MF50-1463

3 3 3 — 3 3 3 — 3 3 3 — 4 4 4 4 4

4 4 4 4 4 4 4 4 4 4 4 4 8 8 8 8 8

12 12 12 12 12 12 12 12 12 12 12 12 16 16 16 16 16

HEAVY

MINI

Sideways Mounting Blocks

MINI

Adjustable Stops

STANDARD

— — — — — — — — — — — — — — — — —

CL-MF25-1650

— —

STANDARD CL-MF40-1650

— —

HEAVY

CL-MF50-1650

— —

MINI

CL-MF25-2001

—

— —

STANDARD CL-MF40-2001

—

— —

CL-MF25-2601 CL-MF25-2602 CL-MF25-2603 CL-MF40-2601 STANDARD CL-MF40-2602 CL-MF40-2603 CL-MF50-2601 HEAVY CL-MF50-2602 CL-MF50-2603 MINI

SS4P

SS4C

—

MINI

SS1P

SS1B

SS1C

QTY. IN SET* COMPONENTS IN STARTER SET

Support Cylinders

Extension Supports

HEAVY

CL-MF50-2001

—

— —

MINI

CL-MF25-2051 CL-MF25-2052

4 —

4 4

8 8

— — — —

—

— — —

STANDARD High-Rise Clamps, Standard-Nose

—

HEAVY

—

— — —

MINI

—

— — —

— — — —

STANDARD CL-MF40-2101 High-Rise Clamps, Gooseneck

Narrow Riser Blocks

Spacer Blocks

Swivel Contact Bolts

HEAVY

CL-MF50-2101

MINI

CL-MF25-2301

— —

STANDARD CL-MF40-2301

— — — —

HEAVY

CL-MF50-2301

MINI

CL-MF25-2351

16 — —

STANDARD CL-MF40-2351

16 — —

HEAVY MINI STANDARD HEAVY

4 — — —

8 4 4 4

16 8 8 8

CL-MF50-2351 CL-MF25-2502 CL-MF40-2501 CL-MF50-2501

— — — —

— — — — — — — — —

— —

HEAVY

CL-MF50-2901 CL-MF25-3101 CL-MF25-3102 CL-MF25-3103 MINI CL-MF25-3104 CL-MF25-3105 CL-MF25-3106 CL-MF25-3107 CL-MF40-3101 CL-MF40-3102 CL-MF40-3103 STANDARD CL-MF40-3104 CL-MF40-3105 CL-MF40-3112 CL-MF40-3113 CL-MF40-3114 CL-MF50-3101 CL-MF50-3102 CL-MF50-3103 CL-MF50-3104 HEAVY CL-MF50-3112 CL-MF50-3113 CL-MF50-3114 CL-MF50-3115

2 4 8 — — 6 12 24 — — — 3 12 — — 6 12 24 — — — 3 12 — — — 3 12 — — — 3 12 — — 3 6 12 — — 3 6 12 — — 3 6 12 — — 3 3 12 — — — 3 12 — — — 3 12 — — — 3 12 — — — 3 12 — — — 3 12 — — 3 6 24 — — 3 3 12 — — — 3 12 — — — 3 12 — — 3 6 24 — — — 3 12 — — — 3 12 — — — — — 3 6

CL-MF25-3152 CL-MF25-3154

— —

3 3

12 — — 12 — —

CL-MF40-3152 STANDARD CL-MF40-3154 CL-MF40-3155

3 — 3

3 3 3

12 — — 12 — — 12 — —

CL-MF50-3153 CL-MF50-3155

3 3

12 — — 12 — —

HEAVY

CL-MF25-3200 CL-MF25-3202 CL-MF25-3204 CL-MF25-3206 CL-MF40-3202 CL-MF40-3204 STANDARD CL-MF40-3205 CL-MF40-3207 CL-MF40-3208 CL-MF50-3202 HEAVY CL-MF50-3204 CL-MF25-3301 CL-MF25-3302 MINI CL-MF25-3303 CL-MF25-3305 CL-MF40-3300 STANDARD CL-MF40-3301 CL-MF40-3302

CL-MF50-3301 CL-MF50-3302 — CL-MF40-3401 STANDARD CL-MF40-3402 CL-MF40-3403 CL-MF50-3401 HEAVY CL-MF50-3402 Heavy-Duty Screw Jacks CL-MF50-3403 MINI — STANDARD CL-MF10-3501 Screw-Jack Tips HEAVY CL-MF10-3501 CL-MF25-3601 MINI CL-MF25-3603 CL-MF25-3605 STANDARD CL-MF40-3601 Halfway Extension Supports HEAVY CL-MF50-3602 CL-MF25-3700 MINI CL-MF25-3702 CL-MF40-3702 CL-MF40-3704 STANDARD CL-MF40-3705 CL-MF40-3707 CL-MF40-3708 CL-MF40-3709 Edge Supports, Single CL-MF50-3702 HEAVY CL-MF50-3704 CL-MF50-3708 CONTINUED ON NEXT PAGE HEAVY MINI

High-Rise Clamps, Tapped-Nose

8 8 8 8 8 8 8 8 8

CL-MF25-2901

MINI

Shoulder Support Cylinders

4 4 4 4 4 4 4 4 4

STANDARD CL-MF40-2901

MINI

Relieved Support Cylinders

— — — — — — — — —

* No substitutions please.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

6 12 24 — — — 6 12 — — — 6 12 — — 3 6 12 — — 3 6 12 — — 3 6 12 — — 3 6 12 — — — — — 3 12 — — — 3 12 3 6 12 — — 3 6 12 — — 2 3 12 — — — 3 12 — — 2 3 12 — — 2 3 12 — — 2 3 12 — — 2 3 12 — — 2 3 12 — — 2 2 — — — — — — — — — — 4 — — 3 4 4 — 2 — 2 — — — 2 2 —

3 3 — 1 1 1 1 1 1 — 1 1 4 4 4 3 4 4 4 4 4 4 — — — 4 4 —

12 12 — 1 1 1 1 1 1 — 1 1 16 16 16 12 16 16 16 8 8 8 — — — 8 8 —

— — — — — — — — — — — — — — — — — — — — — — 2 2 2 — — 2

— — — — — — — — — — — — — — — — — — — — — — 8 8 4 — — 4

Page 14MF (Rev. 8-97) CONTINUED FROM PRECEDING PAGE CL-MF25-3800 MINI CL-MF25-3802 CL-MF40-3802 CL-MF40-3804 STANDARD CL-MF40-3805 CL-MF40-3807 CL-MF40-3808 CL-MF40-3809 Edge Supports, Double CL-MF50-3802 HEAVY CL-MF50-3804 CL-MF50-3808 MINI CL-MF25-3901 CL-MF40-3902 STANDARD CL-MF40-3904 Spring-Stop-Button Adaptors HEAVY CL-MF50-3903 CL-MF25-4101 CL-MF25-4102 MINI CL-MF25-4103 CL-MF25-4104 CL-MF40-4102 CL-MF40-4103 STANDARD CL-MF40-4105 CL-MF40-4112 CL-MF40-4114 Locating-Pin Adaptors CL-MF40-4116 CL-MF50-4102 HEAVY CL-MF50-4103 CL-MF50-4105 MINI — CL-MF40-4202 STANDARD CL-MF40-4203 CL-MF40-4205 CL-MF50-4202 HEAVY CL-MF50-4203 Adjustable Locating-Pin Adaptors CL-MF50-4205 MINI CL-MF25-4300 STANDARD — Locating Bushings HEAVY — MINI — CL-MF40-4301 STANDARD CL-MF40-4302 CL-MF40-4303 CL-MF50-4301 Locating Screws HEAVY CL-MF50-4302 CL-MF50-4303 CL-MF25-4311 MINI CL-MF25-4312 CL-MF25-4313 CL-MF40-4311 STANDARD CL-MF40-4312 CL-MF40-4313 Hex-Head Cap Screws CL-MF50-4311 HEAVY CL-MF50-4312 CL-MF50-4313 MINI CL-MF25-4751 STANDARD CL-MF40-4751 Multipurpose Extension Supports HEAVY CL-MF50-4751 CL-MF25-4801 CL-MF25-4803 CL-MF25-4804 MINI CL-MF25-4805 CL-MF25-4806 CL-MF25-4807 CL-MF40-4801 CL-MF40-4803 STANDARD CL-MF40-4804 CL-MF40-4805 CL-MF40-4807 Screw Rest Pads CL-MF40-4808 CL-MF50-4803 CL-MF50-4804 CL-MF50-4805 HEAVY CL-MF50-4806 CL-MF50-4807 CL-MF50-4808 CL-MF25-5002 MINI CL-MF25-5013 CL-MF40-5002 STANDARD CL-MF40-5013 CL-MF50-5002 HEAVY Hook Clamps CL-MF50-5014 MINI CL-MF25-5101 STANDARD CL-MF40-5101 CL-MF40-5102 CL-MF50-5101 HEAVY Hook-Clamp Holders CL-MF50-5102 CL-MF25-5201 MINI CL-MF25-5203 CL-MF40-5201 STANDARD CL-MF40-5203 CL-MF40-5204 CL-MF50-5201 Riser Cylinders HEAVY CL-MF50-5203 CL-MF50-5204

MINI 2 — — — — — — — — — — 2 2 — 2 1 1 1 1 1 1 1 — — — 1 1 1 — 1 1 1 1 1 1 36 — — — 34 12 8 20 15 — 4 8 4 8 4 4 8 4 4 2 2 2 — 6 — 6 — 6 — — — 3 — 3 — — — 3 — 3 6 6 — 4 — 4 6 4 4 4 4 4 4 4 — 4 4 — 4

3 3 2 2 2 — — — 2 2 — 4 2 2 2 4 4 4 4 2 2 2 — — — 2 2 2 — 2 2 2 2 2 2 78 — — — 74 58 16 43 52 3 12 20 8 16 8 8 12 4 4 2 2 2 6 12 6 12 6 12 3 3 3 6 6 6 3 3 3 6 3 6 8 8 6 6 6 6 8 6 6 6 6 6 6 6 6 6 6 6 6

12 12 4 4 4 — — — 4 4 — 16 8 8 8 8 8 8 8 4 4 4 — — — 4 4 4 — 4 4 4 4 4 4 242 — — — 140 172 32 116 124 12 24 32 8 24 8 8 24 8 8 8 8 8 24 24 24 24 24 24 12 12 12 12 12 12 12 12 12 24 12 24 24 24 24 24 24 24 24 24 24 24 24 16 16 16 6 6 16 6 6

— — — — — 2 2 2 — — 2 — — — — — — — — — — — 2 2 2 — — — — — — — — — — — — — — — 6 24 — 3 8 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — 4 4 4 — — 4 — — — — — — — — — — — 2 2 2 — — — — — — — — — — — — — — — 24 64 — 6 16 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

—

STANDARD CL-MF40-5301 Up-Thrust Clamps

Toggle-Clamp Adaptors

Clamp Adaptors

Swing-Clamp Adaptors

Work-Support Adaptors

Manifold-and-Valve Adaptors

Cam Edge Clamps

HEAVY MINI STANDARD HEAVY MINI STANDARD HEAVY

MINI — STANDARD CL-MF40-5502 HEAVY CL-MF50-5502 MINI — CL-MF40-5504 STANDARD CL-MF40-5505 CL-MF40-5507 HEAVY CL-MF50-5507 MINI — STANDARD CL-MF40-5508 HEAVY CL-MF50-5508 MINI CL-MF25-5611 STANDARD CL-MF40-5611 HEAVY — MINI

Manual Work Supports

Horizontal V Blocks

— — —

12 — —

—

— — —

4 6 16 4 6 16 — — — — — — — — — — — —

— — — — 4 4

— — — — 12 12

— — — — — — — — — — — 3 3 —

— 4 4 — 4 2 2 2 — 2 2 — — —

— 8 8 — 12 8 2 4 — 8 8 — — —

— — — — — — — — — — — 3 3 —

— — — — — — — — — — — 12 12 —

CL-MF25-5701

— —

HEAVY

CL-MF50-5701

— —

MINI

CL-MF25-6001 CL-MF25-6002 CL-MF40-6002 CL-MF50-6002 CL-MF25-7002 CL-MF25-7003 CL-MF25-7004 CL-MF25-7005 CL-MF25-7010 CL-MF25-7020 CL-MF25-7062 CL-MF25-7125 CL-MF40-7002 CL-MF40-7003 CL-MF40-7004 CL-MF40-7005 CL-MF40-7010 CL-MF40-7020 CL-MF40-7062 CL-MF40-7125 CL-MF50-7002 CL-MF50-7003 CL-MF50-7004 CL-MF50-7005 CL-MF50-7010 CL-MF50-7020 CL-MF50-7062 CL-MF50-7125 CL-1A-CR CL-1B-CR CL-4-CR CL-5-CR CL-6-CR CL-7-CR CL-1A-CS CL-1B-CS CL-23D-CS CL-8-CS CL-10-CS CL-30-CS CL-16-CS CL-18-CS CL-33-CS —

2 2 2 2 — — — — — — — — — — — — — — — — — — — — — — — — 8 8 4 4 4 4 8 8 2 4 4 2 4 4 2 —

4 4 4 4 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 6 6 6 6 12 12 4 6 6 2 6 6 2 —

16 16 16 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 32 32 16 16 16 16 32 32 8 16 16 8 16 16 8 —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

STANDARD CL-8-FAC

16 — —

HEAVY MINI STANDARD HEAVY MINI

4 4 16 — — 8 12 32 — — 4 6 16 — — 4 6 16 — — 4 6 16 — — 4 6 16 — — — 4 16 — — — — — — — 8 12 32 — — 4 6 16 — — 4 6 16 — — 3 3 12 — — 3 3 12 — — 3 3 12 — —

STANDARD HEAVY

STANDARD Height Shims

HEAVY

MINI STANDARD HEAVY MINI STANDARD Clamp Straps HEAVY MINI

Forged Adjustable Clamps

—

STANDARD CL-MF40-5701

MINI

Clamp Rests

— CL-MF25-5401 CL-MF40-5401 — — CL-MF40-5501 CL-MF50-5501

—

CL-10-FAC CL-14-FW CL-2-FW Flat Washers CL-3-FW CL-450-HTC CL-450-HTC STANDARD CL-550-HTC Horizontal Toggle Clamps HEAVY — MINI CL-5-JN STANDARD CL-8-JN Jam Nuts HEAVY CL-10-JN MINI CL-4-KSA STANDARD CL-9-KSA Knob Shoe Assemblies HEAVY CL-11-KSA CONTINUED ON NEXT PAGE

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Page 15MF (Rev. 8-97) CONTINUED FROM PRECEDING PAGE MINI CL-0-KSJ STANDARD CL-7-KSJ Knurled Screw Jacks HEAVY CL-10-KSJ MINI CL-200-PC STANDARD CL-200-PC Push/Pull Toggle Clamps HEAVY — CL-516212-SA MINI CL-38314-SA CL-12314-SA STANDARD CL-38314-SA Standard Adjustable Spindles CL-516212-SA HEAVY CL-58438-SA CL-00-SAC MINI CL-5-SAC CL-50-SAC STANDARD CL-55-SAC CL-90-SAC HEAVY Serrated Adjustable Clamps CL-95-SAC CL-6-32X.50-SHCS CL-1/4-20X.62-SHCS CL-5/16-18X.62-SHCS CL-5/16-18X.75-SHCS CL-5/16-18X1.00-SHCS MINI CL-5/16-18X1.12-SHCS CL-5/16-18X1.38-SHCS CL-5/16-18X1.50-SHCS CL-5/16-18X1.75-SHCS CL-5/16-18X2.00-SHCS CL-5/16-18X2.50-SHCS CL-6-32X.50-SHCS CL-10-32X.50-SHCS CL-1/4-20X.62-SHCS CL-1/4-20X.75-SHCS CL-1/4-20X2.00-SHCS CL-5/16-18X.62-SHCS CL-5/16-18X.75-SHCS CL-5/16-18X1.00-SHCS CL-5/16-18X1.50-SHCS STANDARD CL-5/16-18X2.00-SHCS CL-5/16-18X3.50-SHCS CL-1/2-13X1.00-SHCS CL-1/2-13X1.25-SHCS CL-1/2-13X1.50-SHCS Socket-Head Cap Screws CL-1/2-13X1.75-SHCS CL-1/2-13X2.00-SHCS CL-1/2-13X2.25-SHCS CL-1/2-13X2.75-SHCS CL-1/2-13X4.50-SHCS CL-6-32X.50-SHCS CL-10-32X.50-SHCS CL-10-32X1.50-SHCS CL-1/4-20X.75-SHCS CL-1/4-20X2.00-SHCS CL-5/16-18X1.00-SHCS CL-5/16-18X2.50-SHCS CL-5/16-18X3.50-SHCS HEAVY CL-3/8-16X4.00-SHCS CL-5/8-11X1.00-SHCS CL-5/8-11X1.25-SHCS CL-5/8-11X1.50-SHCS CL-5/8-11X2.00-SHCS CL-5/8-11X2.25-SHCS CL-5/8-11X2.50-SHCS CL-5/8-11X3.00-SHCS CL-5/8-11X5.00-SHCS MINI CL-7A-SLP-1 STANDARD — Spring Locating Pins HEAVY — MINI CL-9-SNW STANDARD CL-3-SNW Spherical Nuts & Washers HEAVY CL-4-SNW MINI — STANDARD CL-350-SPC Push/Pull Toggle Clamps HEAVY — MINI CL-6-SPG STANDARD CL-9-SPG Clamp Springs HEAVY CL-11-SPG CL-10A-SSB MINI CL-10C-SSB CL-10A-SSB CL-20A-SSB STANDARD CL-30A-SSB CL-10C-SSB CL-20C-SSB CL-30C-SSB Spring Stop Buttons CL-10A-SSB CL-20A-SSB CL-30A-SSB HEAVY CL-10C-SSB CL-20C-SSB CL-30C-SSB CL-5/16-18X3.00 MINI CL-5/16-18X3.50 STANDARD CL-1/2-13X4.00 CL-1/2-13X5.50 Studs CL-5/8-11X4.50 HEAVY CL-5/8-11X5.50

2 2 2 — — — 8 — 4 — 8 4 — 3 — 3 — 3 8 16 23 25 33 57 34 20 — — 4 4 28 16 4 — — — — — — — 8 43 43 34 6 8 8 4 4 26 — 4 — — — — — — 26 40 63 6 10 6 4 — — — 8 4 4 — — — 16 8 8 2 2 — — — 2 2 2 — — — 2 2 2 8 8 4 4 4 4

4 2 2 3 3 — 12 3 6 14 12 6 4 4 4 4 4 4 16 24 30 60 58 139 72 37 4 8 16 8 90 24 8 — 16 12 — — — — 8 66 62 62 38 37 17 8 8 68 — 8 — — — — — — 35 59 96 16 27 26 8 4 — — 12 6 6 — 3 — 24 12 12 4 4 2 2 2 2 2 2 2 2 2 2 2 2 12 12 6 6 6 6

8 8 8 8 8 — 32 8 24 48 32 24 12 12 12 12 12 12 64 64 104 200 192 388 216 148 4 24 40 32 204 64 32 — 64 32 — — — — 32 208 208 160 120 130 60 16 32 156 — 32 — — — — — — 108 188 288 48 92 86 16 16 — — 32 16 16 — 8 — 64 32 32 16 16 8 8 8 8 8 8 8 8 8 8 8 8 32 32 16 16 16 16

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 6 — — 14 — — 4 12 16 8 — 20 20 4 6 16 14 — — 3 4 — 8 4 18 8 8 4 16 4 20 2 16 6 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 24 — — 56 — — 4 48 32 16 — 56 56 12 20 50 26 — — 6 16 — 32 8 72 16 16 16 40 16 48 4 32 12 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Knurled Check Nuts

MINI CL-51618-TSJN STANDARD CL-1213-TSJN HEAVY CL-5811-TSJN MINI

Vertical Toggle Clamps

Edge Clamps

16 — —

6 4

16 — — 16 — —

HEAVY

— —

HEAVY MINI

CLR-300-BC — CLR-109-CB STANDARD CLR-400-CB CLR-405-CB CLR-402-CB HEAVY CLR-405-CB MINI — STANDARD CLR-110-EC HEAVY CLR-310-EC

3 12

—

— — —

—

CLR-720-EX

— —

—

— CLR-104-F CLR-106-F CLR-104-F CLR-106-F — CLR-200-F CLR-202-F CLR-301-F CLR-303-F CLR-304-F CLR-402-F CLR-403-F CLR-404-F CLR-501-F CLR-814-F CLR-200-F CLR-202-F CLR-301-F CLR-303-F CLR-304-F CLR-402-F CLR-403-F CLR-404-F CLR-501-F CLR-814-F — CLR-9-FH CLR-12-FH CLR-15-FH CLR-18-FH CLR-24-FH CLR-9-FH CLR-12-FH CLR-15-FH CLR-18-FH CLR-24-FH — CLR-2-FL CLR-2-FL — CLR-102-GA CLR-102-GA — CLR-72-H CLR-72-H — CLR-9425-012-PD CLR-9425-012-PD

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— 1 1 1 1 — 1 1 2 4 2 6 4 4 4 6 1 1 2 4 2 6 4 4 4 6 — 3 3 3 3 3 3 3 3 3 3 — 2 2 — 1 1 — 1 1 — 1 1

— 4 4 4 4 — 4 4 8 16 8 24 16 16 16 24 4 4 8 16 8 24 16 16 16 24 — 12 12 12 12 12 12 12 12 12 12 — 2 2 — 4 4 — 4 4 — 4 4

HEAVY

STANDARD

Fittings

HEAVY

MINI STANDARD

Heavy-Duty Hose

—

— 3 12 — — — — 4 12 — 3 12 — 4 12 — 3 12 — 2 4 — — — — 3 12 — 3 12

— — — — — — — — — —

—

MINI

Gauges

— — — — — — — — — — — —

—

STANDARD

Hydraulic Fluid

— — — — — — — — — —

STANDARD CLR-720-EX

MINI

Fixture Hose

— — — — — —

4 —

MINI

Distribution Manifolds

8 8 8

CL-450-VTC

STANDARD CLR-100-BC

Contact Bolts

4 2 2

STANDARD CL-450-VTC CL-650-VTC

MINI Block Push Clamps

2 2 2

HEAVY MINI STANDARD HEAVY MINI STANDARD HEAVY MINI STANDARD HEAVY MINI STANDARD HEAVY

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Pallet Decouplers

Swing Clamps

MINI — STANDARD CLR-311-SC CLR-321-SC CLR-511-SC HEAVY CLR-521-SC MINI

—

STANDARD CLR-440-V Sequence Valves

Work Supports

HEAVY

CLR-440-V

MINI — CLR-121-WS STANDARD CLR-201-WS CLR-410-WS HEAVY CLR-121-WS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

— — — — — — — — 4 8 — — — 4 8 — — — 4 8 — — — 4 8 —

—

— — —

—

— — — — —

— — — — 2 2 — 4 12 — 2 8 — 2 4

Page 16MF (Rev. 4-01)

RECTANGULAR TOOLING PLATES GRAY CAST IRON, ASTM CLASS 40

24x32 16x20

20x24

Standard Heavy

12x16

Standard

Standard Heavy

Ideal tooling plate for most milling machines. Finish ground to tight tolerances, with all multipurpose holes located within .0008 inches of true position. Available in a full range of standard fixture sizes, with mounting holes to fit almost any USA or metric slot spacing. See page 6 for mounting information. Plates can be accurately connected to create many length and width combinations. Also available as blanks, without multipurpose holes (page 239 of tooling-component catalog section).

12x16

16x20

MFRETP P E R MF400111

20x24

24x32

REGULAR PART NO. CL-MF40-0110 CL-MF40-0111 STANDARD CL-MF40-0112 CL-MF40-0113 CL-MF50-0111 HEAVY CL-MF50-0112 CL-MF50-0113 SIZE

MULTIPURPOSE HOLES THREAD ID SPACING PATTERN 6x8 8x10 1/2-13 .5000 2.0000 10x12 12x16 8x10 5/8-11 .6250 2.0000 10x12 12x16

K C 15.875 1/2-13 19.875 2.0000 or 23.875 M12 31.875 19.875 5/8-11 or 23.875 2.0000 M16 31.875

NOMINAL ACTUAL NOMINAL ACTUAL

12 16 20 24 16 20 24

11.875 15.875 19.875 23.875 15.875 19.875 23.875

16 20 24 32 20 24 32

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

APPROX NO. OF MOUNTING SCREWS WEIGHT (LBS) REQUIRED 88 145 4 220 360 6 140 4 215 6 345

Page 17MF (Rev. 8-98)

RECTANGULAR TOOLING PLATES GRAY CAST IRON, ASTM CLASS 40

For large machine tables, connect two or more plates to form a single baseplate, using Locating Gages (page 35) as shown above to maintain accuracy. Gages are removed once plates are fastened to the machine table.

Two sets of Locating-Key holes allow mounting plates either lengthwise or widthwise on a machine table.

The length of each Rectangular Tooling Plate is the same as the width of the next-larger size, allowing many possible combinations by turning plates 90째.

12x20

Mini (Extra Long) 16x24

Mini (Extra Long) Extra-long Rectangular Tooling Plate that mounts lengthwise on a machine table (mini size only). Finish ground to tight tolerances, with all multipurpose holes spaced within .0004 of true position. See page 6 for mounting information.

12x20

16x24

EXTRA LONG A

MULTIPURPOSE HOLES SIZE MINI

PART NO. CL-MF25-0151 CL-MF25-0152

THREAD

5/16-18

.5000

SPACING

PATTERN

NOMINAL

ACTUAL

NOMINAL

1.0000

11x19 15x23

12 16

11.875 15.750

20 24

ACTUAL C K 19.750 1.3750 3/8-16 23.625 1.5000 or M10

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

NO. OF MOUNTING SCREWS REQUIRED

2 3

APPROX WEIGHT (LBS) 79 140

Page 18MF (Rev. 4-01)

ROUND TOOLING PLATES GRAY CAST IRON, ASTM CLASS 40

600mm 500mm 400mm

Standard Heavy

Standard

Heavy

Round tooling plates are perfect for rotary or indexing machine tables. Finish ground to tight tolerances, with all multipurpose holes spaced within .0008 inches of true position. Locate on machine table using Locating Keys, like a Rectangular Tooling Plate.

MFROTP P E MF400311

400mm SIZE STANDARD HEAVY

500mm

PART NO. CL-MF40-0311 CL-MF40-0312 CL-MF50-0312 CL-MF50-0313

600mm

MULTIPURPOSE HOLES THREAD ID SPACING PATTERN 8x8 1/2-13 .5000 2.0000 10x10 10x10 5/8-11 .6250 2.0000 12x12

A DIA

APPROX WEIGHT K NOMINAL ACTUAL (LBS) C 1/2-13 or M12 400mm 15.75 92 500mm 19.69 2.0000 5/8-11 or M16 145 500mm 19.69 141 2.0000 5/8-11 or M16 600mm 23.62 205

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 19MF (Rev. 2-06)

SQUARE PALLET TOOLING PLATES GRAY CAST IRON, ASTM CLASS 40

500mm

630mm

800mm

Standard Heavy

Standard* Heavy

400mm 300mm**

Mini

Mini Standard

Mini Standard Heavy

Ideal tooling plate for machining-center pallets. Finish ground to tight tolerances. Available in a full range of standard pallet sizes, with mounting holes to fit almost any USA or metric slot spacing. Dual mounting capability allows both JIS mounting (locating from two reference edges) and DIN mounting (locating from center and radial holes) with excellent accuracy. See page 7 for mounting information. Also available as blanks, without multipurpose holes (page 241 of tooling-component catalog section).

300mm**

400mm

MINI

STANDARD

HEAVY

PART NO. CL-MF25-0800 CL-MF25-0801 CL-MF25-0802 CL-MF40-0801 CL-MF40-0802 CL-MF40-0803 CL-MF40-0804* CL-MF50-0822 CL-MF50-0823 CL-MF50-0824

THREAD

SPACING

5/16-18

.5000

1.0000

1/2-13

.5000

2.0000

5/8-11

.6250

MF400801

500mm

MULTIPURPOSE HOLES SIZE

MFSTP P E R

2.0000

PATTERN 11x11 15x15 19x19 8x8 10x10 12x12 14x14 10x10 12x12 14x14

A NOMINAL 300mm 400mm 500mm 400mm 500mm 630mm 800mm 500mm 630mm 800mm

630mm

ACTUAL 11.81 15.20 19.13 15.20 19.13 24.25 30.94 19.13 24.25 30.94

C 1.3750 1.5000 2.0000 2.0000 2.3750 2.0000 2.0000 2.3750

E (JIS) 63mm 80mm 100mm 80mm 100mm 125mm 160mm 100mm 125mm 160mm

F (DIN) 50mm 50mm 100mm 50mm 100mm 100mm

100mm

800mm

G (USA) 50mm 3.000 4.000 3.000 4.000 5.000 6.000 4.000 5.000 6.000

H (JIS) M16

J (DIN) M10 M12 M12

M16 M16 M12 M16

M16

K (USA) 5/8-11 or M16 5/8-11 or M16 5/8-11 or M16

L 1.969 2.165 2.953 2.165 2.953 3.937 5.315 2.953 3.937 5.315

N DIA 25mm

P DIA 20mm

20mm 30mm 25mm 20mm 30mm

* Limited-production item â&#x20AC;&#x201D; please contact factory for delivery leadtime. ** 300mm size also fits 320mm pallets with the 10mm-thick edge pads furnished.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

25mm

S 6.2992 7.8740 9.8425 7.8740 9.8425 12.4016 15.7480 9.8425 12.4016 15.7480

APPROX. WEIGHT (LBS) 51 79 130 115 180 290 560 175 280 540

Page 20MF (Rev. 2-06)

RECTANGULAR PALLET TOOLING PLATES GRAY CAST IRON, ASTM CLASS 40

630x800mm 500x630mm 400x500mm 300x400mm**

Standard*

Mini* Standard*

Mini*

Tooling plate for rectangular machining-center pallets. Finish ground to tight tolerances, with all multipurpose holes spaced within .0008 inches of true position (.0004 for mini). Available in a full range of standard pallet sizes, with mounting holes to fit almost any USA or metric slot spacing. Dual mounting capability allows both JIS mounting (locating from two reference edges) and DIN mounting (locating from center and radial holes) with excellent accuracy. See page 7 for mounting information. Also available as blanks, without multipurpose holes (page 242 of toolingcomponent catalog section).

Standard*

MOUNTING HOLES H (JIS) J (DIN) MULTIPURPOSE HOLES 4E

M16 TAPPED HOLE

4F 2F 2E

.709

4F 2F 2E

4E 6F

4E 4F

6F 4F

4E 2F

8F 6F

.984

4F 4E

FOR P DIA FIXTURE KEY

FOR N DIA FIXTURE KEY .0008

Z±.0015 S±.0015

A C±.0008

.0004

.709

300x400mm** SIZE MINI

STANDARD

PART NO. CL-MF25-0850* CL-MF25-0851* CL-MF40-0851* CL-MF40-0852* CL-MF40-0853*

THREAD

500x630mm

400x500mm MULTIPURPOSE HOLES ID

SPACING

5/16-18

.5000

1.0000

1/2-13

.5000

2.0000

PATTERN 11x15 15x19 8x10 10x12 12x14

M16 TAPPED HOLES

A NOMINAL 300mm 400mm 400mm 500mm 630mm

ACTUAL 11.81 15.20 15.20 19.13 24.25

B NOMINAL ACTUAL C 400mm 15.20 1.3750 500mm 19.13 1.5000 500mm 19.13 630mm 24.25 2.0000 800mm 30.94

630x800mm E (JIS) 63mm 80mm 80mm 100mm 125mm

F (DIN)

H (JIS)

50mm

M16

50mm 100mm 100mm

M16

J L (DIN) M10 1.969 M12 2.165 2.165 M12 2.953 M16 3.937

N DIA

P DIA

S Z 6.2992 7.8740 7.8740 9.8425 7.8740 9.8425 20mm 30mm 9.8425 12.4016 25mm 12.4016 15.7480 25mm 20mm

*Limited-production item — please contact factory for delivery leadtime. **300mm size also fits 320mm pallets with the 10mm-thick edge pads furnished.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

APPROX WEIGHT (LBS) 46 110 150 235 385

Page 21MF (Rev. 12-04)

PLATFORM TOOLING PLATES GRAY CAST IRON, ASTM CLASS 45

800mm

630mm 500mm

Standard Heavy*

Standard Heavy

Standard* Heavy MFPTP P E R MF400832

Raised tooling plate for machining-center pallets. Allows tool access to low workpieces below minimum spindle height on horizontal machining centers. Top and bottom surfaces are finish ground to tight tolerances. All multipurpose holes are spaced within .0008 inches of true position. Available in the three largest pallet sizes, with mounting holes to fit almost any USA or metric slot spacing. Incorporates JIS mounting (locating from two reference edges) … see page 7 for mounting information.

MULTIPURPOSE HOLES SIZE STANDARD

HEAVY

PART NO. CL-MF40-0832 CL-MF40-0833 CL-MF40-0834* CL-MF50-0832* CL-MF50-0833 CL-MF50-0834

THREAD

SPACING

1/2-13

.5000

2.0000

5/8-11

.6250

2.0000

A PATTERN

NOMINAL

ACTUAL

6x6 8x8 10x10 6x6 8x8 10x10

500mm 630mm 800mm 500mm 630mm 800mm

17.75 22.88 29.12 17.75 22.88 29.12

11.81 7.8750 15.75 19.69 11.81 7.8750 15.75 19.69

E (JIS)

G (USA)

400mm 500mm 640mm

16 20 24 16 20 24

400mm 500mm 640mm

H (JIS)

K (USA)

APPROX WEIGHT (LBS)

M16

5/8-11 or M16

2.953 3.937 5.315

9.8425 12.4016 15.7480

M16

5/8-11 or M16

2.953 3.937 5.315

9.8425 12.4016 15.7480

1.75 2.00 2.19 1.75 2.00 2.19

265 365 600 260 360 590

* Limited-production item — please contact factory for delivery leadtime.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 22MF (Rev. 12-04)

ANGLE TOOLING PLATES 800mm GRAY CAST IRON, ASTM CLASS 45

630mm 500mm 400mm

Standard

Standard Heavy

Standard* Heavy

Precision angle plate for machining-center pallets. Large working face is accurately finish ground to tight tolerances, and qualified to the base. All multipurpose holes are spaced within .0008 inches of true position. Gussetted back provides excellent strength and rigidity while keeping weight to a minimum. One-piece cast construction provides superior accuracy, dimensional stability, and vibration dampening. Available in a full range of standard pallet sizes, with mounting holes to fit almost any USA or metric slot spacing. Dual mounting capability allows both JIS mounting (locating from two reference edges) and DIN mounting (locating from center and radial holes) with excellent accuracy. See page 7 for mounting information. Also available as blanks, without multipurpose holes (page 243 of tooling-component catalog section).

These vertical plates are ideal for extremely large parts.

400mm

500mm MULTIPURPOSE HOLES

630mm A

PART NO. B THREAD ID SPACING PATTERN NOMINAL ACTUAL C CL-MF40-0451 9x7 400mm 15.20 17.72 18.50 CL-MF40-0452 11x9 500mm 19.13 21.65 22.83 STANDARD 1/2-13 .5000 2.0000 CL-MF40-0453 15x12 630mm 24.25 27.56 29.92 CL-MF40-0454* 17x14 800mm 30.94 31.50 35.43 CL-MF50-0453 15x12 630mm 24.25 27.56 29.92 HEAVY 5/8-11 .6250 2.0000 CL-MF50-0454 17x14 800mm 30.94 31.50 35.43 SIZE

800mm E (JIS)

F (DIN) D 2.36 80mm 50mm 2.56 100mm 100mm 2.95 125mm 100mm 3.15 160mm 2.95 125mm 100mm 3.15 160mm

G (USA) 3.000 4.000 5.000 6.000 5.000 6.000

H (JIS)

J (DIN) M12

M16 M16 M16

M16

K (USA)

P DIA

L S W X V T 2.165 6.8898 7.8740 1.77 14.39 20mm 5/8-11 5/8-11 2.953 8.8583 9.8425 1.97 17.88 or M16 3.937 25mm 12.4016 2.17 23.60 3/4-10 10.4331 5.315 1-8 13.7795 15.7480 2.36 27.55 5/8-11 3.937 25mm 12.4016 2.17 23.60 3/4-10 10.4331 or M16 5.315 1-8 13.7795 15.7480 2.36 27.55

* Limited-production item â&#x20AC;&#x201D; please contact factory for delivery leadtime.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

APPROX WEIGHT (LBS) 210 345 665 1000 655 990

Page 23MF (Rev. 2-06)

TWO-SIDED TOOLING BLOCKS GRAY CAST IRON, ASTM CLASS 45

800mm

630mm 500mm 400mm 300mm**

Mini

Standard Heavy

Mini* Standard

Mini Standard

Standard* Heavy

Precision tooling block for machining-center pallets. Both faces are accurately finish ground to tight tolerances, and qualified to the base. All multipurpose holes are spaced within .0008 inches of true position (.0004 for mini). Onepiece cast construction provides superior accuracy, dimensional stability, and vibration dampening. Available in a full range of standard pallet sizes, with mounting holes to fit almost any USA or metric slot spacing. Dual mounting capability allows both JIS mounting (locating from two reference edges) and DIN mounting (locating from center and radial holes) with excellent accuracy. See page 7 for mounting information. Also available as blanks, without multipurpose holes (page 244 of tooling-component catalog section).

MFTSTB

P E R MF400611

These tooling blocks have two identical wide faces to allow fixturing large parts. MULTIPURPOSE HOLES THREAD ID SPACING PATTERN PART NO. SIZE CL-MF25-0600 11x11 MINI CL-MF25-0601 5/16-18 .5000 1.0000 15x14 CL-MF25-0602* 19x18 CL-MF40-0611 7x7 CL-MF40-0612 9x9 STANDARD 1/2-13 .5000 2.0000 CL-MF40-0613 11x11 CL-MF40-0614* 15x14 CL-MF50-0603 11x11 HEAVY 5/8-11 .6250 2.0000 CL-MF50-0604 15x14

A NOMINAL 300mm 400mm 500mm 400mm 500mm 630mm 800mm 630mm 800mm

ACTUAL 11.81 15.20 19.13 15.20 19.13 24.25 30.94 24.25 30.94

B 13.19 17.72 21.65 17.72 21.65 27.56 31.50 27.56 31.50

E D C (JIS) 11.81 3.9370 252mm 15.75 5.9055 320mm 19.69 7.8740 400mm 15.75 5.8750 320mm 19.69 7.8750 400mm 24.80 9.8750 500mm 31.50 11.8110 640mm 24.80 9.8425 500mm 31.50 11.8110 640mm

F (DIN) 200mm 200&300mm 200&400mm 200&300mm 200&400mm 400mm 400&600mm 400mm 400&600mm

G (USA) 250mm 12 16 12 16 20 24 20 24

K P H J L DIA (JIS) (DIN) (USA) 1.969 M10 5/8-11 2.165 20mm M16 M12 or M16 2.953 2.165 20mm M12 5/8-11 2.953 M16 or M16 3.937 25mm M16 5.315 5/8-11 3.937 25mm M16 M16 or M16 5.315

S 6.2992 7.8740 9.8425 7.8740 9.8425 12.4016 15.7480 12.4016 15.7480

* Limited-production item â&#x20AC;&#x201D; please contact factory for delivery leadtime. ** 300mm size also fits 320mm pallets with the 10mm-thick edge pads furnished.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

T 1.38 1.97 1.97 2.17 2.36 2.17 2.36

W X 3/8-16 4.3307 4.9213 5/8-11 5.9055 4.9365 5/8-11 5.9050 3/4-10 7.4641 1-8 9.8425 3/4-10 7.4803 1-8 9.8425

Z 2.7500 4.0000 5.0000 5.0000 4.5000 5.0000 4.5000

APPROX WEIGHT (LBS) 120 290 470 340 560 1040 1500 1020 1480

Page 24MF (Rev. 2-06)

FOUR-SIDED TOOLING BLOCKS GRAY CAST IRON, ASTM CLASS 45

800mm

630mm 500mm 400mm 300mm**

Mini

Mini Standard

Mini* Standard

Standard Heavy

Standard* Heavy

Precision four-sided tooling block for machining-center pallets. All four faces are accurately finish ground to tight tolerances, and qualified to the base. All multipurpose holes are spaced within .0008 inches of true position (.0004 for mini). One-piece cast construction provides superior accuracy, dimensional stability, and vibration dampening. Available in a full range of standard pallet sizes, with mounting holes to fit almost any USA or metric slot spacing. Dual mounting capability allows both JIS mounting (locating from two reference edges) and DIN mounting (locating from center and radial holes) with excellent accuracy. See page 7 for mounting information. Also available as blanks, without multipurpose holes (page 245 of tooling-component catalog section).

MFFSTB P E R MF400712

With four identical faces, these tooling blocks are ideal for loading a large number of medium-size parts on a pallet. A MULTIPURPOSE HOLES SIZE PART NO. THREAD ID SPACING PATTERN NOMINAL CL-MF25-0700 5x11 300mm MINI CL-MF25-0711 5/16-18 .5000 1.0000 8x14 400mm CL-MF25-0702* 10x18 500mm CL-MF40-0711 4x7 400mm CL-MF40-0712 5x9 500mm .5000 2.0000 1/2-13 STANDARD CL-MF40-0713 7x11 630mm CL-MF40-0714* 9x14 800mm CL-MF50-0703 7x11 630mm HEAVY 5/8-11 .6250 2.0000 CL-MF50-0704 9x14 800mm

ACTUAL 11.81 15.20 19.13 15.20 19.13 24.25 30.94 24.25 30.94

B 13.19 17.72 21.65 17.72 21.65 27.56 31.50 27.56 31.50

E (JIS)

6.8898 9.8425 11.8110 9.8425 11.8125 15.7500 19.6850 15.7480 19.6850

252mm 320mm 400mm 320mm 400mm 500mm 640mm 500mm 640mm

F (DIN)

G (USA)

H J (JIS) (DIN)

250mm 200mm 12 200&300mm M16 16 200&400mm 12 200&300mm 16 200&400mm M16 20 400&600mm 24 400&600mm 20 400&600mm M16 24 400&600mm

M10 M12 M12 M16 M16

K (USA) 5/8-11 or M16 5/8-11 or M16 5/8-11 or M16

L 1.969 2.165 2.953 2.165 2.953 3.937 5.315 3.937 5.315

P DIA 20mm

20mm 25mm 25mm

S 6.2992 7.8740 9.8425 7.8740 9.8425 12.4016 15.7480 12.4016 15.7480

* Limited-production item â&#x20AC;&#x201D; please contact factory for delivery leadtime. ** 300mm size also fits 320mm pallets with the 10mm-thick edge pads furnished.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

1.38 3/8-16 2.8543 2.9528 1.97 5/8-11 3.9370 2.9528 1.97 5/8-11 3.9363 2.17 3/4-10 4.5266 1-8 5.9055 2.36 2.17 3/4-10 4.5276 1-8 5.9055 2.36

Z 2.7500 4.0000 5.0000 5.0000 4.5000 5.0000 4.5000

APPROX WEIGHT (LBS) 120 265 515 325 515 875 1380 870 1350

Page 25MF (Rev. 8-98)

QUICK-CHANGE TOOLING PLATES GRAY CAST IRON, ASTM CLASS 40 (MULTIPURPOSE HOLES) 1045 STEEL (BLANKS)

Quick-Change Tooling Plate Socket-Head Cap Screws (4 or 6) Round Locating Pin Diamond Locating Pin

Mini/Standard

Blank/Standard

Precision lightweight tooling plates that mount on a modular tooling block. Finish ground to tight tolerances. Plates are available either with multipurpose holes to build modular fixtures (mini size), or as blanks to build permanent fixtures. Multipurpose holes are spaced within .0004 inches of true position. To mount plates on a tooling block, first locate them with Round and Diamond Locating Pins (page 35), then fasten them with socket-head cap screws (page 34).

MINI MULTIPURPOSE HOLES SIZE PLATE

MOUNTING

MINI

STANDARD

PART NO.

MULTIPURPOSE HOLES THREAD ID SPACING PATTERN

CL-MF25-4905 5/16-18 .5000 CL-MF25-4907

1.0000

9x13 11x17

MINIMUM PALLET SIZE

400mm 500mm

13.75 17.75

9.75 11.75

1.1875

12.0000 16.0000

2 4

6 8

—

— 8

APPROX WEIGHT (LBS)

LOCATING PINS (1 EA REQD)

SOCKET-HEAD CAP SCREWS (4 0R 6 REQD)

33 57

CL-MF40-4501 CL-1/2-13x2.00-SHCS CL-MF40-4601

12 14 20 24 28 35 55

CL-MF40-4501 CL-1/2-13x2.00-SHCS CL-MF40-4601

BLANK CL-MF40-4901 CL-MF40-4902 CL-MF40-4903 BLANK STANDARD CL-MF40-4904 CL-MF40-4905 CL-MF40-4906 CL-MF40-4907

400mm —

—

500mm

7.50 9.50 9.50 11.50 13.50 13.50 17.50

5.50

7.50

9.50

6.0000 8.0000 8.0000 1.0000 10.0000 12.0000 1.0000 12.0000 1.1875 16.0000 1.0000

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 26MF (Rev. 6-98)

WINDOW TOOLING BLOCKS GRAY CAST IRON, ASTM CLASS 45

630mm

500mm 400mm

Standard

Precision two-sided frame for mounting Vertical Tooling Plates (page 27), allowing quick fixture changes. Also, the center opening can be used to machine a workpiece from the back side. Both faces are accurately finish ground to tight tolerances, and qualified to the base. One-piece cast construction provides superior accuracy, dimensional stability, and vibration dampening. Available in three popular pallet sizes, with mounting holes to fit almost any USA or metric slot spacing. Dual mounting capability allows both JIS mounting (locating from two reference edges) and DIN mounting (locating from center and radial holes) with excellent accuracy. See page 7 for mounting information.

Each Vertical Tooling Plate is accurately mounted on a Window Tooling Block using two Locating Screws at the top corners, and two socket-head cap screws (four on 630mm size). MULTIPURPOSE HOLES A SIZE THREAD ID NOMINAL PART NO. CL-MF40-0651 400mm STANDARD CL-MF40-0652 1/2-13 .5000 500mm CL-MF40-0653 630mm

E G H J K P F ACTUAL B D (JIS) (USA) (JIS) (DIN) (USA) L O DIA S X Y Z (DIN) T U V W 7.8740 15.20 14.76 2.3622 320mm 200 & 300mm 12 2.165 10.24 12.0000 8 5/8-11 6.6929 6.30 12.7500 M12 5/8-11 20mm 1.97 9.8425 19.13 18.70 2.7559 400mm 200 & 400mm 16 M16 2.953 14.17 16.0000 12 7/8-9 8.4646 10.24 16.7500 or M16 M16 24.25 22.64 5.9055 500mm 200 & 400mm 20 3.937 18.11 25mm 12.4016 2.17 20.0000 16 7/8-9 9.4488 14.17 20.7500

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

APPROX WEIGHT (LBS) 155 245 450

Page 27MF (Rev. 4-01)

VERTICAL TOOLING PLATES GRAY CAST IRON, ASTM CLASS 40

20x24 630mm Pallet 16x20 500mm Pallet 12x16 400mm Pallet

Standard

Precision tooling plates that mount vertically on Window Tooling Blocks for quick-change fixturing on machining centers. Finish ground to tight tolerances, with all multipurpose holes spaced within .0008 inches of true position. Available to fit the three most-popular standard pallet sizes. Each plate is accurately mounted on a Window Tooling Block using two Locating Screws at the top corners, and two socket-head cap screws (four on 630mm size). Also available as blanks, without multipurpose holes (page 240 of tooling-component catalog section).

MFRETP

P E R MF400211

Each Vertical Tooling Plate is accurately mounted on a Window Tooling Block (page 26) using two Locating Screws (page 34) and socket-head cap screws (page 34). APPROX MULTIPURPOSE LOCATING SOCKET-HEAD PALLET WEIGHT HOLES A B SCREWS CAP SCREWS SIZE NOMINAL ACTUAL NOMINAL ACTUAL (LBS) THREAD ID SPACING PATTERN SIZE PART NO. C D E F (2 REQD) (2 OR 4 REQD) 11.875 6x8 CL-MF40-0211 400mm 12 16 15.875 8 12.0000 12.7500 64 15.875 8x10 STANDARD CL-MF40-0212 1/2-13 .5000 2.0000 500mm 16 20 19.875 1.3750 12 16.0000 16.7500 105 CL-MF40-4301 CL-1/2-13x1.75-SHCS 19.875 10x12 630mm CL-MF40-0213 20 24 23.875 16 20.0000 20.7500 160

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 28MF (Rev. 8-98)

RISER PLATES GRAY CAST IRON, ASTM CLASS 45

Standard Heavy

Mini

Standard Heavy

MFRP P E R

Use for raising clamps and locators up to reach a workpiece, parallel to the tooling plate. Riser Plates can be mounted either the short way or the tall way. Two sides have bushed locating-screw holes for accurately mounting the riser plate to the tooling plate. The other two sides have multipurpose holes for mounting clamps and locators.

MF400911

MULTIPURPOSE HOLES F±.0015 HOLES FOR LOCATING SCREWS

MULTIPURPOSE HOLES

C ±.0008 F±.0015 IBP

IBP

D ±.0008

E HOLES FOR LOCATING SCREWS

IBP Riser Plate

SIZE

PART NO.

THREAD

SPACING

PATTERN

APPROX WEIGHT (LBS)

MINI

CL-MF25-0900

5/16-18

.5000

1.0000

5x5 and 5x3

5.1250

6.1250

5-1/2

1.5625

1/2-13

.5000

2.0000 2.0000

8.2500 10.2500 8.2500 10.2500

2.1250

.6250

6.2500 8.2500 6.2500 8.2500

5-7/8

5/8-11

3x3 3x4 3x3 3x4

5-7/8

2.1250

MULTIPURPOSE HOLES

STANDARD HEAVY

CL-MF40-0911 CL-MF40-0912 CL-MF50-0901 CL-MF50-0902

and and and and

3x2 3x3 3x2 3x3

57 81 55 79

LOCATING SCREWS (2 REQD) CL-MF25-4300 + CL-5/16-18x1.75-SHCS

SOCKET-HEAD CAP SCREWS (2 REQD) CL-5/16-18x1.75-SHCS

CL-MF40-4302

CL-1/2-13x2.25-SHCS

CL-MF50-4302

CL-5/8-11x3.00-SHCS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 29MF (Rev. 7-03)

ANGLE PLATES GRAY CAST IRON, ASTM CLASS 45 HOLES FOR LOCATING SCREWS MFAP P E R MF400411

IBP

Tall

G ±.0015 PRECISION MACHINED

MULTIPURPOSE HOLES

Mini Standard Heavy

Standard Heavy

IBP

H ±.0015

F D

IBP PRECISION MACHINED

Tall Short

HOLES FOR LOCATING SCREWS

IBP

Standard Heavy

Standard Heavy G ±.0015 F

Versatile way to hold workpieces, clamps or locators perpendicular to the tooling surface. Bottom has bushed locating-screw holes for accurately mounting the angle plate to the tooling plate. Vertical side has multipurpose holes for mounting clamps, locators or vertical tooling plates. Short Angle Plates

PRECISION MACHINED

MULTIPURPOSE HOLES

C H ±.0015

F D IBP

E PRECISION MACHINED

IBP

Short TALL

MULTIPURPOSE HOLES SIZE MINI

PART NO.

THREAD

CL-MF25-0401 5/16-18 .5000

CL-MF40-0411 STANDARD CL-MF40-0412 CL-MF40-0413 CL-MF50-0401 HEAVY CL-MF50-0402 CL-MF50-0403

3x10

11-13/16

5-7/8

3-1/8

2x5 2x7 2x9 2x5 2x7 2x9

11-13/16 6-7/8 15-3/4 8-13/16 19-11/16 10-13/16 11-13/16 7-1/16 15-3/4 9 19-11/16 11

3x2 3x4 3x2 3x4

5-7/8 9-13/16 5-7/8 9-13/16

SPACING PATTERN 1.0000

1/2-13

.5000

2.0000

5/8-11

.6250

2.0000

1.5000 1.5000

3-7/8

1-3/8 2.0000 3.0000

3-7/8

1-9/16 2.1875 3.0000

APPROX WEIGHT (LBS) 22 26 37 51 29 41 55

LOCATING SCREWS (2 REQD)

SOCKET-HEAD CAP SCREWS (1 TO 2 REQD)

CL-MF25-4300 + CL-5/16-18x1.75-SHCS CL-5/16-18x1.75-SHCS CL-MF40-4302

CL-1/2-13x2.25-SHCS

CL-MF50-4302

CL-5/8-11x3.00-SHCS

CL-MF40-4302

CL-1/2-13x2.25-SHCS

CL-MF50-4302

CL-5/8-11x3.00-SHCS

SHORT CL-MF40-0511 STANDARD CL-MF40-0512 CL-MF50-0501 HEAVY CL-MF50-0502

1/2-13

.5000

2.0000

5/8-11

.6250

2.0000

2-15/16 6-11/16 1-3/8 2.0000 3.0000 4-7/8 3-1/8 6-11/16 1-9/16 2.1875 3.0000 5-1/16

18 30 19 35

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 30MF (Rev. 7-02)

QUICK-CHANGE PALLET TOOLING PLATES MODULAR PLATES: GRAY CAST IRON, ASTM CLASS 40 BLANK PLATES: 1050 STEEL

500mm

630mm

800mm

Standard Heavy Blank

Heavy Blank

400mm

Standard Blank

An important new quick-change tooling system (US Patent No. 5,788,225). Fixtures can be assembled off of the machine tool, then quickly mounted on a specially designed pallet subplate, with excellent locating repeatability. The same subplate accepts modular tooling plates, blank tooling plates for permanent fixtures, and subplate tooling blocks. Accurate location is provided by two tapered pins in the subplate, together with mating tapered receiver bushings in the tooling plate, similar to the way that a machine pallet itself is located in a horizontal machining center. Pins and receiver bushings are made from hardened tool steel. Minimal contact area between tooling plate and subplate allows quick cleaning when changing fixtures. Tooling plates are available in a full range of standard pallet sizes, either modular or blank. Modular plates are finish ground to tight tolerances, with a grid of multipurpose holes (hole spacing +/-.0008, hole location from receiver bushings +/-.0016). See pages 32 and 33 for pallet subplates and subplate tooling blocks.

Quick-Change Subplate Tooling Block (p. 33)

Quick-Change Pallet Tooling Plate

Quick-Change Pallet Subplate (p. 32)

Machine Pallet

Quick-Change Pallet Tooling Plate (Modular)

Horizontal Machining Center

Quick-Change Subplate Tooling Block

Quick-Change Pallet Tooling Plate (Blank)

Quick-Change Pallet Subplate

Vertical Machining Center

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 31MF (Rev. 5-99)

QUICK-CHANGE PALLET TOOLING PLATES

400mm

500mm

630mm

800mm

MODULAR — MULTIPURPOSE HOLES PART NO. CL-MF40-0881 STANDARD CL-MF40-0882 CL-MF40-0883 CL-MF50-0882 HEAVY CL-MF50-0883 CL-MF50-0884 SIZE

400mm

MULTIPURPOSE HOLES A C THREAD ID SPACING PATTERN NOMINAL ACTUAL NOMINAL 8x8 400mm 15.20 1/2 - 13 .5000 2.0000 10x10 500mm 19.13 40mm 12x12 630mm 24.25 10x10 500mm 19.13 40mm 5/8-11 .6250 2.0000 12x12 630mm 24.25 45mm 14x14 800mm 30.94

500mm

630mm

ACTUAL 1.5748 1.5748 1.7717

APPROX. WEIGHT E U W (LBS) 320mm 85 400mm 320mm M16 130 500mm 215 400mm 130 500mm 320mm M16 210 640mm 340

800mm BLANK

APPROX. A C WEIGHT PART NO. NOMINAL ACTUAL NOMINAL ACTUAL E U W (LBS) SIZE CL-BF00-0891 400mm 15.75 320mm 110 M12 CL-BF00-0892 500mm 19.69 40mm 170 1.575 400mm BLANK CL-BF00-0893 630mm 24.80 500mm 320mm 275 M16 CL-BF00-0894 800mm 31.50 45mm 1.772 640mm 495 Note: Do not regrind the bottom of a Pallet Tooling Plate (to preserve the accurate fit of its receiver bushings with the tapered pins of the subplate).

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 32MF (Rev. 8-00)

QUICK-CHANGE PALLET SUBPLATES GRAY CAST IRON, ASTM CLASS 40

800mm

630mm 500mm

400mm

These subplates are the foundation of our new quick-change tooling system. Fixtures can be assembled off of the machine tool, then quickly mounted on the subplate, with excellent locating repeatability. The same subplate accepts modular tooling plates, blank tooling plates for permanent fixtures, and subplate tooling blocks…see pages 30, 31, and 33. Accurate location is provided by two tapered pins in the subplate, together with mating tapered receiver bushings in the tooling plate, similar to the way that a machine pallet itself is located in a horizontal machining center. Pins and receiver bushings are made from hardened tool steel. Pin locations are held +/-.0016 from the subplate’s side locating pads. Minimal contact area between tooling plate and subplate allows quick cleaning when changing fixtures. Subplates are available in a full range of standard horizontalmachining-center pallet sizes, and can also be mounted on vertical machining centers by adding appropriate mounting holes. Dual mounting capability allows both JIS mounting (locating from two reference edges) and DIN mounting (locating from center and radial holes) with excellent accuracy. M16 TAPPED HOLES (2) TAPERED PINS 4E 4F 2E 2F

4E 4F 2E 2F

4E 6F 2E 2F

A 4E 6F 4F 2E

(2) W TAPPED HOLES FOR HOIST RINGS M16 TAPPED HOLES

MOUNTING HOLES H (JIS) AND J (DIN)

2E 4F 6F 4E A .984

S±.0016

.0008/12

.079

SIZE ALL

500mm

PART NO. CL-MF00-0841 CL-MF00-0842 CL-MF00-0843 CL-MF00-0844

630mm

(2) 30MM DIA HOLES FOR DIN FIXTURE KEYS

.709

M16 TAPPED HOLES

400mm

.0008/12

S±.0016

L L

A B

.709

C±.0008

.0004/ 12 .0008 A

A .0004/ 12

800mm

A C F E H J NOMINAL ACTUAL NOMINAL ACTUAL (JIS) (DIN) (JIS) (DIN) U L S W 400mm 15.20 80mm 50mm 2.165 7.8740 M12 500mm 19.13 40mm 1.5748 100mm 100mm 2.953 9.8425 320mm M16 630mm 24.25 125mm 100mm M16 3.937 12.4016 M16 800mm 30.94 45mm 1.7717 160mm 5.315 15.7480

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

APPROX. WEIGHT (LBS) 95 145 235 380

Page 33MF (Rev. 8-00)

QUICK-CHANGE SUBPLATE TOOLING BLOCKS GRAY CAST IRON, ASTM CLASS 45

800mm 630mm 500mm 400mm

Subplate tooling blocks are important components of our new quickchange tooling system. These two-sided tooling blocks mount on a Quick-Change Pallet Subplate (page 32), and accept Quick-Change Pallet Tooling Plates, either modular or blank (pages 30-31). This allows tooling-block fixtures to be assembled off of the machine tool, either as individual plates or the entire tooling block, then quickly mounted on a pallet subplate, with excellent locating repeatability. Subplate tooling blocks have two tapered pins on each face for accurately mounting tooling plates, and also have two receiver bushings of their own underneath to provide accurate location on a subplate. Pin and receiver locations are held to +/-.0016.

A E

MOUNTING HOLES FOR M16 CAP SCREWS

(4) W TAPPED HOLES FOR HOIST RINGS (2) W TAPPED HOLES FOR HOIST RINGS

(2) W TAPPED HOLES FOR HOIST RINGS

IBP

M16 TAPPED HOLES (4) PER SIDE

M16 TAPPED HOLES (6) PER SIDE

C E

M16 TAPPED HOLES (6) PER SIDE

D±.0016

.0004/ 12 .0008/12 A

TAPERED PINS (2) B PER SIDE

E Z ±.0016

(2) RECEIVER BUSHINGS

400mm

PART NO. CL-MF00-0641 CL-MF00-0642 ALL CL-MF00-0643 CL-MF00-0644

SIZE

500mm A B NOMINAL ACTUAL NOMINAL ACTUAL 400mm 15.35 465mm 18.31 500mm 19.13 585mm 23.03 630mm 24.25 730mm 28.74 800mm 30.94 930mm 36.61

630mm C NOMINAL ACTUAL 400mm 15.75 500mm 19.69 630mm 24.80 800mm 31.50

IBP

IBP .0004/ 6

800mm D NOMINAL ACTUAL 80mm 3.1496 100mm 3.9370 150mm 5.9055 200mm 7.8740

W T U V E 320mm 1.57 3.9370 M16 400mm 1.77 320mm 5.3150 M20 500mm 2.17 6.2992 M20 640mm 2.36 8.2677 M24

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

APPROX. WEIGHT (LBS) Z 10.2362 210 13.1890 415 16.1417 780 20.8661 1420

Page 34MF (Rev. 4-01)

LOCATING SCREWS 4130 STEEL, HEAT TREATED RC 33-39, BLACK OXIDE FINISH MFLB P E

PRECISION MF404301 GROUND E THRD.

IBP

–.0006 B DIA –.0013

C DIA 7/8 G

A F

SIZE

Standard Heavy Locating Screws are used to mount all locators in multipurpose grid holes (standard and heavy sizes). These specially designed, precision shoulder screws accurately locate and fasten at the same time.

PART NO. CL-MF40-4301 STANDARD CL-MF40-4302 CL-MF40-4303 CL-MF50-4301 HEAVY CL-MF50-4302 CL-MF50-4303

B C G A E F DIA DIA 1-3/4 2-1/4 2-1/4 .5000 3/4 1/2-13 2-3/4 3/8 2-3/4 3-1/4 2 2-5/8 2-1/2 .6250 15/16 5/8-11 3-1/8 1/2 3 3-5/8

LOCATING BUSHINGS 1144 STEEL, HEAT TREATED RC 58-64, BLACK OXIDE FINISH

Mini

FITS SOCKET-HEAD CAP SCREWS SIZE PART NO. MINI CL-MF25-4300 5/16-18

Used in mini-sized systems only. A Locating Bushing used together with a socket-head cap screw works similarly to a Locating Screw. This construction adds extra strength to mini components despite their small size.

SOCKET-HEAD CAP SCREWS GRADE 8, BLACK OXIDE FINISH

USA

Mini Standard Heavy Socket-head cap screws (grade 8) are used for fastening components whenever precise location is not needed. The starter-set listings on pages 13-15 show part numbers and quantities of screws typically used with mini, standard, and heavy systems. Metric sizes are used to fasten plates and blocks to machine pallets.

PART NO. CL-6-32x.50-SHCS CL-10-32x.50-SHCS CL-10-32x1.50-SHCS CL-1/4-20x.62-SHCS CL-1/4-20x.75-SHCS CL-1/4-20x1.50-SHCS CL-1/4-20x2.00-SHCS CL-1/4-20x2.50-SHCS CL-5/16-18x.62-SHCS CL-5/16-18x.75-SHCS CL-5/16-18x1.00-SHCS CL-5/16-18x1.12-SHCS CL-5/16-18x1.38-SHCS CL-5/16-18x1.50-SHCS CL-5/16-18x1.75-SHCS CL-5/16-18x2.00-SHCS CL-5/16-18x2.50-SHCS CL-5/16-18x3.50-SHCS CL-3/8-16x4.00-SHCS

THREAD SIZE #6-32 #10-32

1/4-20

5/16-18

3/8-16

LENGTH UNDER HEAD .50 .50 1.50 .62 .75 1.50 2.00 2.50 .62 .75 1.00 1.12 1.38 1.50 1.75 2.00 2.50 3.50 4.00

1.00 CL-1/2-13x1.00-SHCS 1.25 CL-1/2-13x1.25-SHCS 1.50 CL-1/2-13x1.50-SHCS 1.75 CL-1/2-13x1.75-SHCS 1/2-13 2.00 CL-1/2-13x2.00-SHCS 2.25 CL-1/2-13x2.25-SHCS 2.75 CL-1/2-13x2.75-SHCS 4.50 CL-1/2-13x4.50-SHCS 1.00 CL-5/8-11x1.00-SHCS 1.25 CL-5/8-11x1.25-SHCS 1.50 CL-5/8-11x1.50-SHCS 2.00 CL-5/8-11x2.00-SHCS 5/8-11 2.25 CL-5/8-11x2.25-SHCS 2.50 CL-5/8-11x2.50-SHCS 3.00 CL-5/8-11x3.00-SHCS 5.00 CL-5/8-11x5.00-SHCS CL-3/4-10x1.50-SHCS 3/4-10 1.50 1.50 1-8 CL-1-8x1.50-SHCS

METRIC CLM-16x40-SHCS CLM-16x50-SHCS CLM-16x65-SHCS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

M16

1.57 1.97 2.56

Page 35MF (Rev. 4-01)

LOCATING GAGES

MFLG P E

1045 STEEL, BLACK OXIDE FINISH

MF404001

B DIA FOR LOCATING BOLT (+.0007, –.0000)

2 ±0.0008

PRECISION GROUND

IBP 2 ±0.0008

Standard Heavy

A-SQ.

Use when connecting two tooling plates, to hold tolerances. Remove after fastening plates to machine.

PRECISION GROUND

IBP

1 ±0.004

LOCATING B SCREW A DIA SIZE PART NO. (4 REQD) STANDARD CL-MF40-4001 3-1/8 .5000 CL-MF40-4302 HEAVY CL-MF50-4001 3-3/8 .6250 CL-MF50-4302

LOCATING PINS 1144 STEEL, HEAT TREATED RC 50-55, BLACK OXIDE FINISH

ROUND

Round

Diamond

Round and Diamond Locating Pins are used together to align QuickChange Tooling Plates or vises on a modular plate or block.

HEAD SHANK DIA SIZE PART NO. DIA STANDARD CL-MF40-4501 .5000 .6250 HEAVY CL-MF50-4501 .6250

DIAMOND STANDARD CL-MF40-4601 .6250 CL-MF50-4601 HEAVY

Standard Heavy

.5000 .6250

HEX-HEAD CAP SCREWS GRADE 8, BLACK OXIDE FINISH A THREAD

C D PART NO. B A CL-MF25-4311 .75 MINI CL-MF25-4312 5/16-18 1.25 13/64 1/2 CL-MF25-4313 1.50 CL-MF40-4311 1.75 STANDARD CL-MF40-4312 1/2-13 2.75 5/16 3/4 CL-MF40-4313 3.00 CL-MF50-4311 2.00 HEAVY CL-MF50-4312 5/8-11 3.00 25/64 15/16 CL-MF50-4313 3.50 SIZE

D HEX

Mounting screws for high-rise clamps, where access to a socket-head screw is difficult.

Mini Standard Heavy

SPARE PROTECTION PLUGS PLASTIC

Mini Standard Heavy

Durable screw-in plugs to keep dirt and chips out of holes that are not used for a particular setup. Note: a complete set of protection plugs is furnished with each tooling plate and block.

SIZE PART NO. MINI CL-MF25-0001 STANDARD CL-MF40-0001 HEAVY CL-MF50-0001

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 36MF (Rev. 4-01)

CLAMP RISER BLOCKS 1041 STEEL, BLACK OXIDE FINISH MFRBU P E MF401601

FOR C MOUNTING SCREWS C TAPPED HOLE C TAPPED HOLE

Swing Clamp Assembly

2 Clamp Riser Block

Standard Heavy Stackable block for raising clamps up a workpiece. Especially useful for mounting Swing Clamp Assemblies (page 58), Screw Clamp Adaptors (page 64) and Toggle Clamp Adaptors (page 65).

IBP

2 B-SQ.

SOCKET-HEAD CAP SCREW SIZE PART NO. A B (2 REQD) CL-MF40-1601 1 CL-1/2-13x1.50-SHCS STANDARD 2-15/16 1/2-13 CL-MF40-1602 2 CL-1/2-13x2.75-SHCS CL-MF50-1601 1 CL-5/8-11x2.00-SHCS HEAVY 3-3/8 5/8-11 CL-MF50-1602 2 CL-5/8-11x3.00-SHCS C DIA

SIDEWAYS MOUNTING BLOCKS 1045 STEEL, BLACK OXIDE FINISH

Mini Standard Heavy Versatile block that allows mounting a clamp, or other component, sideways. Note: Riser Plates (page 28) also can be used for sideways mounting when additional strength and rigidity are required.

SIZE PART NO. A B C D E MINI CL-MF25-1650 5/16-18 1 5/8 1-7/8 1 STANDARD CL-MF40-1650 1/2-13 2 1 3-3/8 2 HEAVY CL-MF50-1650 5/8-11 2 1-1/4 3-3/8 2

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

SOCKET-HEAD CAP SCREW (2 REQD) CL-5/16-18x2.50-SHCS CL-1/2-13x4.50-SHCS CL-5/8-11x5.00-SHCS

Page 37MF (Rev. 4-01)

SUPPORT RISER BLOCKS 1045 STEEL, BLACK OXIDE FINISH

Mini Standard Heavy

SOCKET-HEAD CAP SCREW SIZE PART NO. A B C D (2 REQD) CL-MF25-1411 .5000 CL-5/16-18x1.00-SHCS CL-MF25-1412 .7500 CL-5/16-18x1.12-SHCS MINI 5/16-18 1-3/4 1 CL-MF25-1413 1.0000 CL-5/16-18x1.38-SHCS CL-MF25-1414 2.0000 CL-5/16-18x2.50-SHCS CL-MF40-1411 1.0000 CL-1/2-13x1.50-SHCS CL-MF40-1412 1.2500 CL-1/2-13x1.75-SHCS STANDARD 1/2-13 3-3/8 2 CL-MF40-1413 1.5000 CL-1/2-13x2.00-SHCS CL-MF40-1414 2.0000 CL-1/2-13x2.50-SHCS CL-MF50-1411 1.0000 CL-5/8-11x2.00-SHCS CL-MF50-1412 1.2500 HEAVY 5/8-11 3-3/8 2 CL-5/8-11x2.25-SHCS CL-MF50-1413 1.5000 CL-5/8-11x3.00-SHCS CL-MF50-1414 2.0000

Stackable block with precision ground top and bottom surfaces for accurate height location. Ideal for raising supports up to a workpiece. A choice of seven tapped holes allows mounting the support at any position between grid points.

MULTIPURPOSE RISER BLOCKS TOOL STEEL, HEAT TREATED RC 42-46, BLACK OXIDE FINISH

Mini Standard Heavy A stackable, precision riser block with multipurpose holes instead of plain tapped holes. This unique feature allows raising any locator that mounts with Locating Screws, including Edge Supports (page 41), Support Cylinders (page 42-43), Locating Pin Adaptors (page 44-45), and V Blocks (page 4647). These blocks can also be used to extend some components beyond the edge of a tooling plate, as shown in the example.

Standard Heavy

Mini MULTIPURPOSE HOLES

SIZE

PART NO.

THREAD

CL-MF25-1461 MINI

5/16-18

1.90

1.0000

CL-MF25-4300+ CL-5/16-18x1.38-SHCS CL-MF25-4300+ CL-5/16-18x1.38-SHCS

1/2-13

3.52

2.0000

CL-MF40-4301

5/8-11

3.52

2.0000

CL-MF50-4301

1.0000 5/16-18 .5000

CL-MF25-1462

1.5000

STANDARD CL-MF40-1462 CL-MF40-1463 HEAVY CL-MF50-1463

1.5000 1/2-13 .5000 2.0000 5/8-11 .6250 2.0000

LOCATING SCREWS (2 REQD)

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 38MF (Rev. 4-01)

EXTENSION SUPPORTS 1045 STEEL, HEAT TREATED, BLACK OXIDE FINISH MFEXS P L E R MF403301

E-TAPPED HOLE D

C PRECISION GROUND

IBP

1-9/16 F

Mini

Standard Heavy

A ±.0004

Extension Supports are a perfect height locator to mount underneath Serrated Adjustable Clamps (page 62).

Cam Edge Clamps (page 60) can be placed anywhere between grid points when mounted in an Extension Support’s tapped hole.

PART NO. CL-MF25-3301 CL-MF25-3302 CL-MF25-3303 MINI CL-MF25-3304 CL-MF25-3305 CL-MF25-3306 CL-MF40-3300 STANDARD CL-MF40-3301 CL-MF40-3302 CL-MF50-3301 HEAVY CL-MF50-3302 SIZE

H PRECISION GROUND

B ±.0004

Extension Supports have a precision ground top and bottom surface for accurate height location. Standard and heavy sizes also have a precision ground step, for simultaneous height and edge location. Available in many support heights to match other types of height locators. The tapped hole is ideal for positioning components between grid points.

Screw Rest Pads (page 46) can be positioned anywhere between grid points when mounted on an Extension Support.

PRECISION GROUND

—

.7500 1.0000 1.5000 1.0000 1.5000

PRECISION GROUND IBP

Forged Adjustable Clamps (page 60) can be placed anywhere between grid points when mounted in an Extension Support’s tapped hole.

Extension Supports allow precise edge location anywhere between grid points. SOCKET-HEAD CAP SCREW (1 REQD)

B C D E F G H .5000 .7500 CL-5/16-18x1.00-SHCS 1.0000 7/8 11/32 5/16-18 — 5/16 2-1/2 1.2500 1.5000 CL-5/16-18x1.50-SHCS 2.0000 1.0000 CL-1/2-13x1.50-SHCS 1.2500 1-1/2 17/32 1/2-13 3/8 1 5-1/2 2.0000 CL-1/2-13x2.75-SHCS 1.2500 CL-5/8-11x2.00-SHCS 2 21/32 5/8-11 1/2 1-1/8 5-1/2 2.0000 CL-5/8-11x2.50-SHCS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 39MF (Rev. 4-01)

MULTIPURPOSE EXTENSION SUPPORTS 1018 STEEL, CASE HARDENED, BLACK OXIDE FINISH

Similar to the Extension Supports on page 38, but with a multipurpose hole instead of a plain tapped hole (and slightly larger). This allows attaching any fixed-position locator that mounts with a Locating Screw, enabling that locator to be used between grid points. Such locators include Support Cylinders (page 42), Shoulder Support Cylinders (page 43), and Locating-Pin Adaptors (pages 44-45). Top and bottom surfaces are precision ground for accurate height location.

Mini Standard Heavy

MULTIPURPOSE HOLE

Can be used with a Support Cylinder for simultaneous horizontal and vertical location, using the top surface of the Multipurpose Extension Support as a height locator.

SOCKET-HEAD CAP SCREW (1 REQD)

PART NO. D A F C G THREAD ID B E MINI CL-MF25-4751 5/16-18 .5000 1.0000 5/16-18 1-1/2 3-5/8 3/4 1 1-1/2 CL-5/16-18x1.00-SHCS STANDARD CL-MF40-4751 1/2-13 .5000 1.5000 1/2-13 2-1/4 6 1-1/4 1-3/8 2-7/8 CL-1/2-13x2.00-SHCS HEAVY CL-MF50-4751 5/8-11 .6250 2.0000 5/8-11 2-1/2 6-1/2 1-1/4 1-3/4 2-7/8 CL-5/8-11x2.50-SHCS SIZE

HALFWAY EXTENSION SUPPORTS 1045 STEEL, HEAT TREATED, BLACK OXIDE FINISH FOR B MOUNTING SCREW B TAPPED HOLE IBP

MFHWEXS

P E R MF403601

F D

A Âą.0004

Mini Standard Heavy Precision ground top and bottom surface for accurate height location. Ideal for positioning components exactly halfway between two multipurpose holes. Also useful as a large rest pad.

IBP

PART NO. CL-MF25-3601 CL-MF25-3602 CL-MF25-3603 MINI CL-MF25-3604 CL-MF25-3605 CL-MF25-3606 CL-MF40-3601 STANDARD CL-MF40-3602 CL-MF40-3603 CL-MF50-3601 HEAVY CL-MF50-3602 CL-MF50-3603 SIZE

SOCKET-HEAD CAP SCREWS (2 REQD)

A B D E F .5000 .7500 CL-5/16-18x1.00-SHCS 1.0000 1.2500 5/16-18 2 7/8 1 1.5000 CL-5/16-18x1.38-SHCS 2.0000 1.0000 1.2500 1/2-13 4 2 2 CL-1/2-13x1.50-SHCS 1.5000 1.0000 1.2500 5/8-11 4 2 2 CL-5/8-11x2.00-SHCS 1.5000

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 40MF (Rev. 4-01)

HEIGHT SHIMS 1144 STEEL, HEAT TREATED, BLACK OXIDE FINISH

Mini Standard Heavy

SIZE

PART NO. CL-MF25-7002 CL-MF25-7003 CL-MF25-7004 CL-MF25-7005 MINI CL-MF25-7010 CL-MF25-7020 CL-MF25-7062 CL-MF25-7125 CL-MF40-7002 CL-MF40-7003 CL-MF40-7004 CL-MF40-7005 STANDARD CL-MF40-7010 CL-MF40-7020 CL-MF40-7062 CL-MF40-7125 CL-MF50-7002 CL-MF50-7003 CL-MF50-7004 CL-MF50-7005 HEAVY CL-MF50-7010 CL-MF50-7020 CL-MF50-7062 CL-MF50-7125

Precision shims that allow raising a height locator by a small, exact amount. Ideal when supporting at different levels underneath a workpiece, as in the example shown using Support Cylinders. Shims are stackable to obtain any height in .001-inch increments. Thickness tolerance is +.0003 on .062 and .125 sizes, + 10% on smaller sizes.

A .002 .003 .004 .005 .010 .020 .062 .125 .002 .003 .004 .005 .010 .020 .062 .125 .002 .003 .004 .005 .010 .020 .062 .125

B DIA

C DIA

9/16 15/16

9/16 1-5/8

11/16 1-7/8

RISER CYLINDERS 1045 STEEL, BLACK OXIDE FINISH MFRC P E

Hook Clamp

MF405201

Heavy-Duty Screw Jack

Adjustable Stop

PART NO. CL-MF25-5201 MINI CL-MF25-5202 CL-MF25-5203 CL-MF40-5201 STANDARD CL-MF40-5203 CL-MF40-5204 CL-MF50-5201 HEAVY CL-MF50-5203 CL-MF50-5204 SIZE

Mini Standard Heavy Provides additional height without taking up much space. Useful with Hook Clamps (page 59), Heavy-Duty Screw Jacks (page 48), and Adjustable Stops (page 50).

Riser Cylinder

C A B DIA D E 1-1/4 2 1-1/2 7/8 1 2-1/4 5/16-18 2 2-3/4 2 3-1/4 3-1/8 1-7/16 1-9/16 4-3/8 1/2-13 4 5-1/4 2 3-1/4 3-1/8 1-13/16 2 4-3/8 5/8-11 4 5-1/4

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 41MF (Rev. 4-01)

EDGE SUPPORTS 1045 STEEL, HEAT TREATED, BLACK OXIDE FINISH

Single

Precision edge locator with a ground step for simultaneous horizontal and vertical location. Large contact area is ideal for supporting heavy workpieces and locating curved surfaces. Available in many support heights to match other types of height locators. For additional height, use Multipurpose Riser Blocks (page 37).

Mini Standard Heavy

SINGLE SIZE

PART NO.

CL-MF25-3700 CL-MF25-3701 MINI CL-MF25-3702 CL-MF25-3703 CL-MF40-3701 CL-MF40-3702 CL-MF40-3703 CL-MF40-3704 CL-MF40-3705 STANDARD CL-MF40-3706 CL-MF40-3707 CL-MF40-3708 CL-MF40-3709 CL-MF50-3701 CL-MF50-3702 CL-MF50-3703 CL-MF50-3704 HEAVY CL-MF50-3705 CL-MF50-3706 CL-MF50-3707 CL-MF50-3708

Double

A .5000 .7500 1.0000 1.2500 .7500 1.0000 1.2500 1.5000 2.0000 2.5000 3.0000 4.0000 5.0000 1.0000 1.2500 1.5000 2.0000 2.5000 3.0000 4.0000 5.0000

LOCATING SCREWS (2 REQD)

F C H G E B D 1 1-1/4 CL-MF25-4300+ 3/8 5/16-18 1.0000 1-3/4 1-3/8 .5000 — 1-1/2 CL-5/16-18x1.50-SHCS 2 1-3/4 CL-1/2-13x1.50-SHCS 2 2-1/4 CL-MF40-4302 2-1/2 CL-1/2-13x2.00-SHCS 3 1/2-13 2.0000 3-3/8 3-3/8 1.2500 1-7/16 3-1/2 4-1/2 5-1/2 CL-MF40-4303 CL-1/2-13x2.25-SHCS 6-1/2 2 2-1/4 2-1/2 CL-MF50-4302 CL-5/8-11x2.00-SHCS 3 5/8-11 2.0000 3-3/8 3-3/8 1.2500 1-7/16 3-1/2 4-1/2 5-1/2 CL-MF50-4303 CL-5/8-11x2.00-SHCS 6-1/2

DOUBLE

Single MFES P E R MF403801

Double

SOCKET-HEAD CAP SCREWS (0 OR 2 REQD)

SIZE

PART NO.

CL-MF25-3800 CL-MF25-3801 MINI CL-MF25-3802 CL-MF25-3803 CL-MF40-3801 CL-MF40-3802 CL-MF40-3803 CL-MF40-3804 STANDARD CL-MF40-3805 CL-MF40-3806 CL-MF40-3807 CL-MF40-3808 CL-MF40-3809 CL-MF50-3801 CL-MF50-3802 CL-MF50-3803 CL-MF50-3804 HEAVY CL-MF50-3805 CL-MF50-3806 CL-MF50-3807 CL-MF50-3808

A .5000 .7500 1.0000 1.2500 .7500 1.0000 1.2500 1.5000 2.0000 2.5000 3.0000 4.0000 5.0000 1.0000 1.2500 1.5000 2.0000 2.5000 3.0000 4.0000 5.0000

1 1-1/4 5/16-18 1.0000 1-3/4 .5000 1-1/2 2 1-3/4 2 2-1/4 2-1/2 3 1/2-13 2.0000 3-3/8 .7500 3-1/2 4-1/2 5-1/2 6-1/2 2 2-1/4 2-1/2 3 5/8-11 2.0000 3-3/8 .7500 3-1/2 4-1/2 5-1/2 6-1/2

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

LOCATING SCREWS (2 REQD) CL-MF25-4300+ CL-5/16-18x1.50-SHCS

CL-MF40-4302

CL-MF40-4303

CL-MF50-4302

CL-MF50-4303

Page 42MF (Rev. 4-01)

SUPPORT CYLINDERS

MFSC P E

1045 OR 1144 STEEL, HEAT TREATED, BLACK OXIDE FINISH Extremely versatile precision locator that can be used either as a support or for side location. Ground on top, bottom, and outside diameter. Available in many support heights to match other types of height locators. For additional height, use Multipurpose Riser Blocks (page 37). To position between grid points, use a Multipurpose Extension Support (page 39).

MF403101

Mini Standard Heavy

Mini With the wide range of available heights, Support Cylinders can be used as both side locators and supports.

A Multipurpose Extension Support (page 39) can be used to mount a Support Cylinder anywhere between grid points.

Two Support Cylinders can accurately locate a large diameter, similar to using a V Block.

SIZE

PART NO. CL-MF25-3101 CL-MF25-3102 CL-MF25-3103 MINI CL-MF25-3104 CL-MF25-3105 CL-MF25-3106 CL-MF25-3107 CL-MF40-3101 CL-MF40-3112 CL-MF40-3113 CL-MF40-3102 STANDARD CL-MF40-3114 CL-MF40-3103 CL-MF40-3104 CL-MF40-3115 CL-MF40-3105 CL-MF50-3112 CL-MF50-3113 CL-MF50-3101 CL-MF50-3114 HEAVY CL-MF50-3102 CL-MF50-3103 CL-MF50-3115 CL-MF50-3104

Standard Heavy A .5000 .7500 1.0000 1.2500 1.5000 2.0000 2.5000 1.0000 1.2500 1.5000 2.0000 2.5000 3.0000 4.0000 4.5000 5.0000 1.2500 1.5000 2.0000 2.5000 3.0000 4.0000 4.5000 5.0000

B DIA

C DIA

LOCATING SCREW (1 REQD)

D 5/32

CL-5/16-18x1.00-SHCS

3/8

CL-5/16-18x1.12-SHCS

7/16

CL-MF40-4301

15/16

CL-MF40-4302

9/16

CL-MF50-4301

1-1/16

CL-MF50-4302

1.0000 .5000

1.6250 .5000 2.0000

2.0000 .6250

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 43MF (Rev. 4-01)

SHOULDER SUPPORT CYLINDERS 1045 OR 1144 STEEL, HEAT TREATED, BLACK OXIDE FINISH

MFSC P E MF403201

Standard and Heavy

Mini SIZE

Mini

Standard Heavy

MINI

Precision edge locator with a ground shoulder for simultaneous horizontal and vertical location. Available in many support heights to match other types of height locators. For additional height, use Multipurpose Riser Blocks (page 37). To position between grid points, use a Multipurpose Extension Support (page 39).

STANDARD

Shoulder Support Cylinders can be used to locate from internal edges, as well as external edges. Here three of them locate a large bored diameter, one mounted on a Multipurpose Extension Support.

HEAVY

PART NO. CL-MF25-3200 CL-MF25-3201 CL-MF25-3202 CL-MF25-3203 CL-MF25-3204 CL-MF25-3205 CL-MF25-3206 CL-MF40-3201 CL-MF40-3202 CL-MF40-3203 CL-MF40-3204 CL-MF40-3205 CL-MF40-3206 CL-MF40-3207 CL-MF40-3208 CL-MF50-3201 CL-MF50-3202 CL-MF50-3203 CL-MF50-3204 CL-MF50-3205 CL-MF50-3206 CL-MF50-3207

A .5000 .7500 1.0000 1.2500 1.5000 2.0000 2.5000 .7500 1.0000 1.2500 1.5000 2.0000 2.5000 3.0000 4.0000 1.0000 1.2500 1.5000 2.0000 2.5000 3.0000 4.0000

B .7500 1.0000 1.2500 1.5000 2.0000 2.5000 3.0000 1.0000 1.2500 1.5000 2.0000 2.5000 3.0000 4.0000 5.0000 1.2500 1.5000 2.0000 2.5000 3.0000 4.0000 5.0000

C DIA

D DIA

E DIA

LOCATING SCREW (1 REQD)

1.0000

1-1/2

.5000

3/8

CL-5/16-18x1.12-SHCS

7/16

CL-MF40-4301

1.6250 2-5/16

.5000

15/16

CL-MF40-4302

9/16

CL-MF50-4301

1-1/16

CL-MF50-4302

2.0000

2-7/8

.6250

RELIEVED SUPPORT CYLINDERS 1045 OR 1144 STEEL, HEAT TREATED, BLACK OXIDE FINISH

Relieved Support Cylinder

SIZE

Mini Standard Heavy Ideal support underneath a drilled hole. This precision height locator provides full support, yet allows for drill clearance and chip cleanout. Available in many support heights to match other types of height locators. For additional height, use Support Riser Blocks (page 37). To position between grid points, use an Extension Support (page 38).

PART NO. CL-MF25-3151 CL-MF25-3152 MINI CL-MF25-3153 CL-MF25-3154 CL-MF25-3155 CL-MF40-3152 CL-MF40-3153 STANDARD CL-MF40-3154 CL-MF40-3155 CL-MF50-3153 HEAVY CL-MF50-3154 CL-MF50-3155

C A B D .7500 3/16 1.0000 1.2500 1 5/16-18 5/16 1.5000 2.0000 1.0000 3/16 1.2500 5/16 1-5/8 1/2-13 1.5000 7/16 2.0000 1.2500 5/16 1.5000 2 5/8-11 7/16 2.0000

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

SOCKET-HEAD CAP SCREW (1 REQD) CL-5/16-18x1.00-SHCS

CL-5/16-18x1.12-SHCS

CL-1/2-13x1.25-SHCS CL-1/2-13x1.50-SHCS

CL-5/8-11x2.00-SHCS

Page 44MF (Rev. 4-01)

LOCATING-PIN ADAPTORS CARBON STEEL, HEAT TREATED, BLACK OXIDE FINISH PATENT NO. 4,834,358

Fixed

Adjustable Diamond Locating Pin

Round Locating Pin

Mini Standard Heavy

Round and Diamond Locating Pins are frequently used together for proper workpiece location without binding. The Round Locating Pin is usually mounted in the fixed adaptor.

Standard Heavy

Extremely useful for locating from existing holes in a workpiece. These Locating-Pin Adaptors use off-the-shelf Round and Diamond Locating Pins to fit hole diameters exactly. Fixed adaptors mount at grid points in multipurpose holes, to maintain full positional accuracy. To adjust for hole spacing, a second fixed adaptor can be mounted between grid points using a Multipurpose Extension Support (page 39). An adjustable-type adaptor can also be used if lower height is required. Note: Locating pins mounted between grid points must be indicated into correct x-and-y-axis position during mounting. LS-1 LOCKSCREW IBP (Furnished) ROUND OR DIAMOND LOCATING PIN (Order Separately) LOCATING PIN DIA +.0000 A A–.0005

F DIA H

FIXED SIZE

MFLPAF P E R MF404101

Fixed B SHANK DIAMETER

E ±.0004

D DIA C THREAD

IBP IBP

PART NO. CL-MF25-4101 CL-MF25-4102 MINI CL-MF25-4103 CL-MF25-4104 CL-MF40-4101 CL-MF40-4102 CL-MF40-4111 CL-MF40-4112 CL-MF40-4113 CL-MF40-4103 STANDARD CL-MF40-4104 CL-MF40-4114 CL-MF40-4115 CL-MF40-4105 CL-MF40-4106 CL-MF40-4116 CL-MF40-4117 CL-MF50-4101 CL-MF50-4102 CL-MF50-4103 HEAVY CL-MF50-4104 CL-MF50-4105 CL-MF50-4106

FOR C MOUNTING SCREWS F DIA 2

2-3/4 5-1/2

1-1/4

Adjustable

H LS-1 LOCKSCREW (Furnished) IBP

E ±.0004 1/2

1/8 to 5/16

5/16

5/16 to 1/2

1/2

1/8 to 5/16

5/16

5/16 to 1/2

1/2

1/2 to 3/4

3/4

1/8 to 5/16

5/16

5/16 to 1/2

1/2

1/2 to 3/4

3/4

D DIA

E F 1.5000 1-1/2 2.5000 5/16-18 .5000 1.5000 1-3/4 2.5000 1.5000 2.0000 2.5000 1-1/2 3.0000 4.0000 2.0000 1/2-13 .5000 2.5000 1-3/4 3.0000 4.0000 2.0000 2.5000 2 3.0000 4.0000 1.5000 1-1/2 2.0000 2.0000 5/8-11 .6250 1-3/4 2.5000 2.0000 2 2.5000

H 13/32 15/32

13/32

15/32

21/32

13/32 15/32 21/32

ADJUSTABLE

MFLPAA P E R MF404201

A B LOCATING PIN LOCATING PIN DIA RANGE SHANK DIA

SIZE

PART NO.

CL-MF40-4201 CL-MF40-4202 CL-MF40-4203 STANDARD CL-MF40-4204 CL-MF40-4205 CL-MF40-4206 CL-MF50-4201 CL-MF50-4202 CL-MF50-4203 HEAVY CL-MF50-4204 CL-MF50-4205 CL-MF50-4206

A B LOCATING PIN LOCATING PIN DIA RANGE SHANK DIA 1/8 to 5/16

5/16

5/16 to 1/2

1/2

1/2 to 3/4

3/4

1/8 to 5/16

5/16

5/16 to 1/2

1/2

1/2 to 3/4

3/4

1.5000 2.0000 2.0000 1/2-13 2.5000 2.0000 2.5000 1.5000 2.0000 2.0000 5/8-11 2.5000 2.0000 2.5000

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

F DIA

SOCKET-HEAD CAP SCREWS (2 REQD)

1-1/2 13/32 1-3/4 15/32 2

CL-1/2-13x1.75-SHCS

21/32

1-1/2 13/32 1-3/4 15/32 CL-5/8-11x2.00-SHCS 2

21/32

Page 45MF (Rev. 7-02)

LOCATING-PIN ADAPTORS CARBON STEEL, HEAT TREATED, BLACK OXIDE FINISH PATENT NO. 4,834,358

SUPPORT CYLINDER ROUND LOCATING PIN DIAMOND LOCATING PIN To mount a Fixed Locating-Pin Adaptor between grid points, use a Multipurpose Extension Support (page 39). Alternatively, an Adjustable Locating-Pin Adaptor could be used for lower height (standard and heavy sizes only).

Adjustable Locating Pin Adaptor

Workpiece Base Plate

Locating-Pin Adaptors are precision ground on top and bottom to provide accurate height location. Usually just one additional rest is required for full three-point support.

Three locating pins can be used in combination to locate workpieces with large internal diameters.

3/4" SHANK STOCK PIN DIAMETERS USA

For additional locating-pin dimensions, see pages 158-161 of tooling-component catalog section. Special head diameters (A dimensions) are readily available.

1/2" SHANK STOCK PIN DIAMETERS USA

5/16" SHANK STOCK PIN DIAMETERS USA

Round Locating Pin

ROUND PIN PART NO. CL-123-RLT CL-124-RLT CL-154-RLT CL-155-RLT CL-186-RLT CL-187-RLT CL-217-RLT CL-218-RLT CL-248-RLT CL-249-RLT CL-279-RLT CL-280-RLT CL-311-RLT CL-312-RLT

DIAMOND HEAD DIA PIN (A) PART NO. NOMINAL ACTUAL CL-123-DLT .1235 1/8 CL-124-DLT .1245 CL-154-DLT .1548 5/32 CL-155-DLT .1558 CL-186-DLT .1860 3/16 CL-187-DLT .1870 CL-217-DLT .2173 7/32 CL-218-DLT .2183 CL-248-DLT .2485 1/4 CL-249-DLT .2495 CL-279-DLT .2798 9/32 CL-280-DLT .2808 CL-311-DLT .3110 5/16 CL-312-DLT .3120

METRIC Diamond Locating Pin

CL-5-RLT-.2347 CL-5-DLT-.2347 CL-5-RLT-.2357 CL-5-DLT-.2357

Fixed Locating Pin Adaptors

6mm

.2347 .2357

ROUND PIN PART NO. CL-310-RLT CL-3115-RLT CL-341-RLT CL-342-RLT CL-373-RLT CL-374-RLT CL-404-RLT CL-405-RLT CL-435-RLT CL-436-RLT CL-466-RLT CL-467-RLT CL-498-RLT CL-499-RLT

DIAMOND HEAD DIA PIN (A) PART NO. NOMINAL ACTUAL CL-310-DLT .3105 5/16 CL-3115-DLT .3115 CL-341-DLT .3418 11/32 CL-342-DLT .3428 CL-373-DLT .3730 3/8 CL-374-DLT .3740 CL-404-DLT .4043 13/32 CL-405-DLT .4053 CL-435-DLT .4355 7/16 CL-436-DLT .4365 CL-466-DLT .4668 15/32 CL-467-DLT .4678 CL-498-DLT .4980 1/2 CL-499-DLT .4990

CL-8-RLT-.3130 CL-8-RLT-.3140 CL-8-RLT-.3917 CL-8-RLT-.3927 CL-8-RLT-.4704 CL-8-RLT-.4714

CL-8-DLT-.3130 CL-8-DLT-.3140 CL-8-DLT-.3917 CL-8-DLT-.3927 CL-8-DLT-.4704 CL-8-DLT-.4714

ROUND PIN PART NO. CL-4980-RLT CL-4990-RLT CL-529-RLT CL-530-RLT CL-560-RLT CL-561-RLT CL-591-RLT CL-592-RLT CL-623-RLT CL-624-RLT CL-654-RLT CL-655-RLT CL-685-RLT CL-686-RLT CL-716-RLT CL-717-RLT CL-748-RLT CL-749-RLT

DIAMOND PIN PART NO. CL-4980-DLT CL-4990-DLT CL-529-DLT CL-530-DLT CL-560-DLT CL-561-DLT CL-591-DLT CL-592-DLT CL-623-DLT CL-624-DLT CL-654-DLT CL-655-DLT CL-685-DLT CL-686-DLT CL-716-DLT CL-717-DLT CL-748-DLT CL-749-DLT

CL-12-RLT-.5492 CL-12-RLT-.5502 CL-12-RLT-.6279 CL-12-RLT-.6289 CL-12-RLT-.7067 CL-12-RLT-.7077

CL-12-DLT-.5492 CL-12-DLT-.5502 CL-12-DLT-.6279 CL-12-DLT-.6289 CL-12-DLT-.7067 CL-12-DLT-.7077

METRIC

HEAD DIA (A) NOMINAL 1/2 17/32 9/16 19/32 5/8 21/32 11/16 23/32 3/4

ACTUAL .4980 .4990 .5293 .5303 .5605 .5615 .5918 .5928 .6230 .6240 .6543 .6553 .6855 .6865 .7168 .7178 .7480 .7490

METRIC 8mm 10mm 12mm

.3130 .3140 .3917 .3927 .4704 .4714

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

14mm 16mm 18mm

.5492 .5502 .6279 .6289 .7067 .7077

Page 46MF (Rev. 4-01)

SCREW REST PADS 1144 STEEL, HEAT TREATED, BLACK OXIDE FINISH

Screw Rest Pad

SIZE

Mini Standard Heavy Precision height locator with a small contact area. Available in a wide range of heights, including very short sizes. This support can be installed in either a plain tapped hole or a multipurpose hole. F

A THREAD

D DIA

E±.0004

PART NO. A B C CL-MF25-4801 CL-MF25-4802 CL-MF25-4803 MINI CL-MF25-4804 5/16-18 3/4 5/8 CL-MF25-4805 CL-MF25-4806 CL-MF25-4807 CL-MF40-4801 CL-MF40-4802 CL-MF40-4803 CL-MF40-4804 STANDARD 1/2-13 7/8 15/16 CL-MF40-4805 CL-MF40-4806 CL-MF40-4807 CL-MF40-4808 CL-MF50-4801 CL-MF50-4802 CL-MF50-4803 CL-MF50-4804 HEAVY 5/8-11 1 1-1/4 CL-MF50-4805 CL-MF50-4806 CL-MF50-4807 CL-MF50-4808

VERTICAL V BLOCKS 1045 STEEL, HEAT TREATED, BLACK OXIDE FINISH

D DIA

E .2500 .3750 .5000 5/16 .7500 1.0000 1.2500 1.5000 .2500 .3750 .5000 .7500 1/2 1.0000 1.2500 1.5000 2.0000 .2500 .3750 .5000 .7500 5/8 1.0000 1.2500 1.5000 2.0000

F 75° 60° 35° 25° 20° 15° 75° 60° 35° 25° 20° 15° 75° 60° 35° 25° 20° 15°

MFVB P E R MF406101

Standard Heavy

Ideal for mounting a cylindrical workpiece with its axis perpendicular to the tooling surface. Locating surfaces are precision ground and accurately qualified with respect to the mounting holes.

WORKPIECE LOCATING DIAMETER SCREWS RANGE A B C E (2 REQD) SIZE PART NO. STANDARD CL-MF40-6101 9/16 to 3-1/8 2-1/2 1.3951 3-1/4 1/2-13 CL-MF40-4302 HEAVY CL-MF50-6101 9/16 to 3-1/8 2-1/2 1.3951 3-1/4 5/8-11 CL-MF50-4302

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 47MF (Rev. 4-01)

HORIZONTAL V BLOCKS 1045 STEEL, HEAT TREATED, BLACK OXIDE FINISH

Small V

Mini (2 Holes) Standard (2 Holes) Heavy (2 Holes)

Large V Extremely versatile locator for cylindrical workpieces. Locating surface is precision ground and accurately qualified with respect to the mounting holes. Two tapped holes in the side (standard and heavy sizes only) can be used to mount end stops or clamps. Available in two types: one for small diameters, and one for larger diameters.

Mini (4 Holes) Standard (2 Holes) Heavy (2 Holes)

Mini—Small V Mini—Large V MFVB P E R MF406001

In the above example, Support Cylinders are used as end stops for shafts located in Horizontal V Blocks.

Standard—Small V Heavy—Small V

To locate a workpiece from two different diameters simultaneously, use Height Shims (page 40) and/or Multipurpose Riser Blocks (page 37) to raise one V block to the proper level.

Standard—Large V Heavy—Large V

SMALL V

WORKPIECE DIAMETER SIZE PART NO. RANGE MINI CL-MF25-6001 3/8 to 1 STANDARD CL-MF40-6001 9/16 to 3-1/8 HEAVY CL-MF50-6001 9/16 to 3-1/8

A 1-1/4 2-1/2 2-1/2

B .8750 1.3951 1.3951

MINI CL-MF25-6002 STANDARD CL-MF40-6002 HEAVY CL-MF50-6002

1-1/2 3 3

.7500 1.5858 1.5858

D — 1/2-13 5/8-11

E — 1-1/8 1-3/8

F — 2 2

G 1 3-3/8 3-3/8

H 1-3/4 3-3/8 3-3/8

— 2 2

1-3/4 3-3/8 3-3/8

LOCATING SCREWS (2 REQD)

SOCKET-HEAD CAP SCREWS (0 OR 2 REQD)

CL-MF25-4300 + CL-5/16-18x1.38SHCS CL-MF40-4302

— — —

CL-MF25-4300 + CL-5/16-18x1.38SHCS

CL-5/16-18x1.38-SHCS — —

LARGE V 9/16 to 2 9/16 to 4 9/16 to 4

— 1/2-13 5/8-11

— 1-1/8 1-3/8

CL-MF40-4302

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 48MF (Rev. 4-01)

HEAVY-DUTY SCREW JACKS JACK SCREW: 4135 STEEL, HEAT TREATED, BLACK OXIDE FINISH TIP: 1144 OR 1045 STEEL, HEAT TREATED, BLACK OXIDE FINISH BODY: 1045 STEEL, BLACK OXIDE FINISH MFSJ P E R MF403401

Standard Heavy

For additional height and/or mounting between grid points, use Riser Cylinders (page 40), Support Riser Blocks (page 37), or Extension Supports (page 38).

SCREW JACKS Heavy-duty adjustable support that accepts any of the three tips shown below. Choice of three heights in each size cover the full range of height possibilities. See page 148 of tooling-component catalog section for additional dimensions.

SIZE

PART NO. CL-MF40-3401 STANDARD CL-MF40-3402 CL-MF40-3403 CL-MF50-3401 HEAVY CL-MF50-3402 CL-MF50-3403

MOUNTING SCREW OUTSIDE RETRACTED SIZE DIAMETER HEIGHT 1-5/8 1/2-13 1-9/16 2 2-3/4 1-5/8 5/8-11 1-9/16 2 2-3/4

MAX SCREW TRAVEL 3/8 3/4 1-1/2 3/8 3/4 1-1/2 MFSJT P E R MF103502

SCREW-JACK TIPS PART NO. TYPE CL-MF10-3501 RADIUS ALL CL-MF10-3502 CONICAL CL-MF10-3503 V-SHAPED

SIZE

Radius Tip

Conical Tip

V-Shaped Tip

OUTSIDE DIAMETER 1-3/16

OVERALL TIP HEIGHT 3/8 11/16 11/16

KNURLED SCREW JACKS 12L14 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

Mini Standard Heavy Knurled head allows quick, easy finger adjustment. Order Check Nut separately. See page 123 of tooling-component catalog section for additional dimensions and sizes.

CHECK KNURLED LENGTH NUT SCREW JACK THREAD UNDER PART NO. PART NO. SIZE HEAD SIZE CL-51618-TSJN 5/16-18 CL-0-KSJ 1-5/8 MINI CL-1213-TSJN CL-7-KSJ 1/2-13 2-1/2 STANDARD CL-5811-TSJN CL-10-KSJ 5/8-11 2-1/2 HEAVY

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 49MF (Rev. 7-02)

MANUAL WORK SUPPORTS BODY & PLUNGER: CARBON STEEL, CASE HARDENED, BLACK OXIDE FINISH HANDLE: ZINC DIE CASTING, ENAMEL PAINT

Ideal for supporting in hard-to-reach places, such as underneath this casting. Work supports can be positioned to allow convenient handle access.

Mini Standard Heavy Spring-extended manual work support with an extremely low profile. Plunger is locked at proper height by tightening handle. If desired, lock plunger in retracted position for easier loading of light parts, then release and retighten to extend and support. Adjustable handle can be reset to any convenient angle. See page 147 of tooling-component catalog section for complete dimensions. A Screw Rest Pad (page 46), available from 1/4" to 2" tall, is an ideal contact bolt to use in the support plunger. For an adjustable contact screw, use a Knurled Screw Jack (page 48). The mounting slot allows stacking other components, such as this Cam Edge Clamp, on top of the support.

SIZE MINI STANDARD HEAVY

PART NO. CL-MF25-5701 CL-MF40-5701 CL-MF50-5701

TAPPED HOLE IN PLUNGER 5/16-18 1/2-13 5/8-11

HEIGHT WITH PLUNGER FULLY RETRACTED

MAX PLUNGER STROKE

DISTANCE FROM PLUNGER TO SLOT

1.709 1.945 1.339

.118 .236 .433

1-1/16 1-9/16 1-3/4

SLOT LENGTH 1-3/8 3-9/16 3-15/16

SOCKET-HEAD CAP SCREW (1 REQD.) CL-5/16-18x1.12-SHCS CL-1/2-13x1.50-SHCS CL-5/8-11x2.00-SHCS

TORQUE SCREW JACKS 12L14 STEEL, BLACK OXIDE FINISH TSJ P E 4TSJ

Mini Standard Heavy CONTROLLED TORQUE COUNTERCLOCKWISE A knurled-head screw jack that declutches at a preset torque. When the indicated end force is reached, the head disengages and turns freely. This eliminates the possibility of exerting excess force on thinwall parts. Knurled check nut is furnished. See page 133 of tooling-component catalog section for complete dimensions and additional sizes.

POSITIVE RETRACTION CLOCKWISE

SIZE PART NO. MINI CL-4A-TSJ STANDARD CL-6-TSJA HEAVY CL-8-TSJA

END LENGTH THREAD FORCE UNDER SIZE (LBS) HEAD 5/16-18 14-16 1-3/4 1/2-13 18-20 1-3/4 5/8-11 20-22 1-3/4

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 50MF (Rev. 4-01)

ADJUSTABLE STOPS

MFAS P L E R

BOLT: 4135 OR 1144 STEEL, HEAT TREATED, BLACK OXIDE FINISH BODY: 1045 OR 1018 STEEL, BLACK OXIDE FINISH

MF402901

IBP B A ADJUSTMENT SCREW, H LONG

Three tapped crossholes allow setting the stop at different heights.

Mini Standard Heavy

IBP

Versatile side stop with an adjustment screw that can be mounted at three different heights. For additional height, mount the Adjustable Stop on top of a Riser Cylinder (page 40) or Support Riser Block (page 37). To mount sideways, use a Sideways Mounting Block (page 36).

D B C SIZE E F PART NO. A MINI 3/4 CL-MF25-2901 5/16-18 7/8 1-5/8 1-1/4 1 2 1-1/2 1-1/4 STANDARD CL-MF40-2901 1/2-13 1-1/2 2-3/8 HEAVY CL-MF50-2901 5/8-11 1-7/8 3-1/8 2-1/2 2 1-1/2

MOUNTING HOLE FOR SOCKETHEAD CAP SCREW

H 2 4 4

ADJUSTABLE SWING STOPS BOLT: 4135 OR 1144 STEEL, HEAT TREATED, BLACK OXIDE FINISH BODY: 1045 OR 1018 STEEL, BLACK OXIDE FINISH

SOCKET-HEAD CAP SCREW (1 REQD) CL-5/16-18x1.00-SHCS CL-1/2-13x1.50-SHCS CL-5/8-11x2.00-SHCS

MFASC P L E R MF401801

The contact screw can be reversed for additional mounting versatility.

Standard Heavy SIZE

An adjustable side stop with considerable adjustment range. The long swing arm can be set at any angle, and is slotted to increase or decrease swing radius. Also, the arm can be swung out of the way after loading if desired.

PART NO. A CL-MF40-1801 2 to 2-1/2 STANDARD CL-MF40-1802 2-1/2 to 3-1/8 CL-MF40-1803 3-1/8 to 4 CL-MF50-1801 2 to 2-1/2 HEAVY CL-MF50-1802 2-1/2 to 3-1/8 CL-MF50-1803 3-1/8 to 4

SOCKET-HEAD CAP SCREW (2 REQD)

E B D F G 5 5-5/8 1/2-13 4-3/8 1-9/16 7/8 CL-1/2-13x2.75-SHCS 6-1/2 5-1/4 5-7/8 5/8-11 4-3/8 1-3/4 1 CL-5/8-11x3.00-SHCS 6-3/4

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 51MF (Rev. 8-98)

SPRING-STOP-BUTTON ADAPTORS CARBON STEEL, HEAT TREATED, BLACK OXIDE FINISH PATENT NO. 4,832,325

MOUNTING OPTIONS Workpiece

Mini Standard Heavy

Workpiece

Versatile adaptor for standard Spring Stop Buttons and Spring Locating Pins. Applies spring pressure to the workpiece to hold it against its locators. Fits three sizes of Spring Stop Buttons (one in mini size), both round and flat face, and two sizes of Spring Locating Pins.

Workpiece

The adaptor can be used three ways: 1. As a height-locating point. Use rear mounting holes. 2. Without height locating. Use front mounting holes. 3. Reverse mounting. Use as a height-locating point with most of adaptor under workpiece.

Round-Face Spring Stop Buttons

Flat-Face Spring Stop Buttons

Spring Locating Pins

MOUNTING HOLE FOR SPRING LOCATING PIN MOUNTING HOLES FOR THREE SIZES OF SPRING STOP BUTTONS

C CL-10C-SSB

CL-10A-SSB

CL-7-SLP-1 Light CL-7-SLP-2 Medium CL-7-SLP-3 Heavy F

CL-20A-SSB

CL-20C-SSB

CL-30C-SSB

CL-30A-SSB

SIZE MINI STANDARD

HEAVY

PART NO. CL-MF25-3901 CL-MF40-3901 CL-MF40-3902 CL-MF40-3903 CL-MF40-3904 CL-MF50-3901 CL-MF50-3902 CL-MF50-3903 CL-MF50-3904

FITS ROUND FACE STOP BUTTONS CL-10A-SSB

FITS FLAT FACE STOP BUTTONS

CL-10A-SSB CL-20A-SSB CL-30A-SSB

CL-10C-SSB CL-20C-SSB CL-30C-SSB

CL-10A-SSB CL-20A-SSB CL-30A-SSB

CL-10C-SSB CL-20C-SSB CL-30C-SSB

CL-10C-SSB

FITS SPRING LOCATING PINS

B .5000 .7500 CL-7-SLP-1 1.0000 CL-7-SLP-2 1.2500 CL-7-SLP-3 1.5000 CL-7A-SLP-1 .7500 CL-7A-SLP-2 1.0000 CL-7A-SLP-3 1.2500 1.5000

E D SLOT FOR SOCKETHEAD CAP SCREW

CL-7A-SLP-1 Light CL-7A-SLP-2 Medium CL-7A-SLP-3 Heavy

C 1

D 3

4-3/4

B ±.0004

SOCKET-HEAD SOCKET-HEAD CAP SCREWS FOR CAP SCREW SPRING STOP BUTTONS (2 REQD) (1 REQD) F E SMALL MEDIUM LARGE 1-7/16 1-5/16 CL-5/16-18x1.00-SHCS CL-6-32x.50-SHCS — — CL-1/2-13x1.25-SHCS CL-1/2-13x1.50-SHCS 2-3/4 1-9/16 CL-6-32x.50-SHCS CL-10-32x.50-SHCS CL-1/4-20x.75-SHCS CL-1/2-13x1.75-SHCS CL-1/2-13x2.00-SHCS CL-5/8-11x1.50-SHCS 2-3/4

1-9/16

CL-5/8-11x2.00-SHCS

CL-6-32x.50-SHCS

CL-5/8-11x2.25-SHCS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

CL-10-32x.50-SHCS

CL-1/4-20x.75-SHCS

Page 52MF (Rev. 8-98)

SLOTTED-HEEL CLAMP STRAPS

Short Clamp-Strap Assembly (see below)

Tall Clamp-Strap Assembly (see below)

Tall Clamp-Strap Assembly on Riser Block (p. 37) or Riser Cylinders (p. 40)

Our most-popular clamp strap, with a slot underneath to allow sliding it straight back for clear loading. Choose from three different fastening devices, each available in a short or tall version, and two clamp-strap lengths. Order components individually (page numbers listed are in the tooling-component catalog section).

Spherical Nut & Washer

High-Rise Clamp (p. 54)

High-Rise Clamp on Narrow Riser Block (p. 56)

SPHERICAL NUT & WASHER (SHORT) SIZE

CLAMPING HEIGHT RANGE

MINI

0 to 1-1/16

STANDARD 0 to 1-3/8 HEAVY

0 to 1-3/8

CLAMP STRAP (p. 213) A PART NO. LENGTH 2-1/2 27/32 CL-1A-CS 3 1-11/32 CL-1B-CS 5 2-1/4 CL-8-CS 6 2-3/4 CL-10-CS 5 2-3/16 CL-16-CS 6 2-11/16 CL-18-CS

CLAMP REST (p. 182)

CLAMP FLAT JAM SPRINGS WASHER NUT (p. 183) (p. 181) (p. 177)

STUD (p. 189)

SPHER. NUT & WASHER (p. 179)

CL-1A-CR CL-6-SPG CL-14-FW CL-5-JN CL-5/16-18x3.00 CL-9-SNW CL-4-CR

CL-9-SPG

CL-2-FW CL-8-JN CL-1/2-13x4.00

CL-3-SNW

CL-6-CR

CL-11-SPG CL-3-FW CL-10-JN CL-5/8-11x4.50

CL-4-SNW

SPHERICAL NUT & WASHER (TALL)

CL-1A-CS 1 to 1-3/4 MINI CL-1B-CS CL-8-CS STANDARD 1-3/8 to 2-3/4 CL-10-CS CL-16-CS HEAVY 1-3/8 to 2-1/2 CL-18-CS

Mini Standard Heavy

High-Rise Clamp on Spacer Block (p. 56)

2-1/2 3 5 6 5 6

27/32 CL-1B-CR (2) CL-6-SPG CL-14-FW CL-5-JN CL-5/16-18x3.50 1-11/32 2-1/4 CL-5-CR (2) CL-9-SPG CL-2-FW CL-8-JN CL-1/2-13x5.50 2-3/4 2-3/16 CL-7-CR (2)CL-11-SPG CL-3-FW CL-10-JN CL-5/8-11x5.50 2-11/16

CL-9-SNW CL-3-SNW CL-4-SNW

HAND KNOB (SHORT)

Hand Knob A

CLAMPINGCLAMP STRAP HEIGHT (p. 213) SIZE RANGE A PART NO. LENGTH CL-1A-CS 2-1/2 27/32 MINI 0 to 1-1/16 3 1-11/32 CL-1B-CS 5 2-1/4 CL-8-CS STANDARD 0 to 1-3/8 6 2-3/4 CL-10-CS 5 2-3/16 CL-16-CS HEAVY 0 to 1-3/8 6 2-11/16 CL-18-CS

CLAMP REST (p. 182)

CLAMP SPRINGS (p. 183)

JAM FLAT WASHER NUT (p. 181) (p. 177)

STUD (p. 189)

HAND KNOB (p. 54)

CL-1A-CR CL-6-SPG CL-14-FW CL-5-JN CL-5/16-18x3.00 CL-2-HK-2

SPHERICAL WASHER (p. 179) CL-11-SW

CL-4-CR

CL-9-SPG

CL-2-FW CL-8-JN CL-1/2-13x4.00

CL-6-CR

CL-11-SPG

CL-3-FW CL-10-JN CL-5/8-11x4.50 CL-10-HK-10 CL-4-SW

CL-4-HK-4

CL-3-SW

HAND KNOB (TALL) CL-1A-CS MINI CL-1B-CS CL-8-CS 1-3/8 to 2-3/4 STANDARD CL-10-CS CL-16-CS HEAVY 1-3/8 to 2-1/2 CL-18-CS 1 to 1-3/4

Mini Standard Heavy

2-1/2 3 5 6 5 6

27/32 CL-1B-CR (2) CL-6-SPG CL-14-FW CL-5-JN CL-5/16-18x3.50 CL-2-HK-2 CL-11-SW 1-11/32 2-1/4 CL-5-CR (2) CL-9-SPG CL-2-FW CL-8-JN CL-1/2-13x5.50 CL-4-HK-4 CL-3-SW 2-3/4 2-3/16 CL-7-CR (2)CL-11-SPG CL-3-FW CL-10-JN CL-5/8-11x5.50 CL-10-HK-10 CL-4-SW 2-11/16

CAM HANDLE (SHORT) Cam Handle

CLAMPINGCLAMP STRAP EYE DOWEL CLAMP CLAMP SPHERICAL CAM JAM FLAT HEIGHT (p. 213) PIN REST SPRINGS WASHER WASHER HANDLE BOLT NUT SIZE RANGE (p. 185) A PART NO. LENGTH (p. 182) (p. 183) (p. 181) (p. 177) (p. 179) (p. 185) (p. 184) 2-1/2 27/32 CL-1A-CS MINI 0 to 1-1/16 CL-1A-CR CL-6-SPG CL-14-FW CL-5-JN CL-11-SW CL-11A-CH CL-31-EB CL-1/4x.62-CADP 3 1-11/32 CL-1B-CS 5 2-1/4 CL-8-CS STANDARD 0 to 1-3/8 CL-4-CR CL-9-SPG CL-2-FW CL-8-JN CL-3-SW CL-13-CH CL-50-EB CL-3/8x1.00-CADP 6 2-3/4 CL-10-CS 5 2-3/16 CL-16-CS HEAVY 0 to 1-3/8 CL-6-CR CL-11-SPG CL-3-FW CL-10-JN CL-4-SW CL-14-CH CL-62-EB CL-5/8x1.25-CADP 6 2-11/16 CL-18-CS

CAM HANDLE (TALL) Mini Standard Heavy

CL-1A-CS 1 to 1-3/4 MINI CL-1B-CS CL-8-CS STANDARD 1-3/8 to 2-3/4 CL-10-CS CL-16-CS HEAVY 1-3/8 to 2-1/2 CL-18-CS

2-1/2 3 5 6 5 6

27/32 CL-1B-CR (2) CL-6-SPG CL-14-FW CL-5-JN CL-11-SW CL-11A-CH CL-32-EB CL-1/4x.62-CADP 1-11/32 2-1/4 CL-5-CR (2) CL-9-SPG CL-2-FW CL-8-JN CL-3-SW CL-13-CH CL-51-EB CL-3/8x1.00-CADP 2-3/4 2-3/16 CL-7-CR (2)CL-11-SPG CL-3-FW CL-10-JN CL-4-SW CL-14-CH CL-63-EB CL-5/8x1.25-CADP 2-11/16

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 53MF (Rev. 8-98)

DOUBLE-END CLAMP STRAPS A clamp-strap assembly with two clamping ends, for holding two workpieces simultaneously. Choose from three different fastening devices, each available in a short or tall version, and two clamp-strap lengths. Order components individually (page numbers listed are in the tooling-component catalog section).

SPHERICAL NUT & WASHER (SHORT)

Spherical Nut & Washer A

CLAMPINGCLAMP STRAP CLAMP HEIGHT (p. 224) SPRINGS SIZE RANGE A PART NO. LENGTH (p. 183) 2 27/32 CL-23C-CS MINI 0 to 1-1/16 CL-6-SPG 3 1-11/32 CL-23D-CS 5 2-19/64 CL-28-CS STANDARD 0 to 1-3/8 CL-9-SPG 6 2-51/64 CL-30-CS 5 2-1/4 CL-32A-CS HEAVY 0 to 1-3/8 CL-11-SPG 6 2-3/4 CL-33-CS

JAM NUT (p. 177)

CL-14-FW

CL-5-JN CL-5/16-18x3.00

CL-9-SNW

CL-2-FW

CL-8-JN

CL-1/2-13x4.00

CL-3-SNW

CL-3-FW

CL-10-JN CL-5/8-11x4.50

CL-4-SNW

SPHERICAL NUT & WASHER (p. 179)

STUD (p. 189)

SPHERICAL NUT & WASHER (TALL) CL-23C-CS CL-23D-CS CL-28-CS STANDARD 1-3/8 to 2-3/4 CL-30-CS CL-32A-CS HEAVY 1-3/8 to 2-1/2 CL-33-CS MINI

Mini Standard Heavy

FLAT WASHER (p. 181)

1 to 1-3/4

2 3 5 6 5 6

27/32 (2) CL-6-SPG CL-14-FW CL-5-JN CL-5/16-18x3.50 1-11/32 2-19/64 (2) CL-9-SPG CL-2-FW CL-8-JN CL-1/2-13x5.50 2-51/64 2-1/4 (2)CL-11-SPG CL-3-FW CL-10-JN CL-5/8-11x5.50 2-3/4

CL-9-SNW CL-3-SNW CL-4-SNW

HAND KNOB (SHORT)

Hand Knob

SPHERICAL WASHER (p. 179)

CL-5-JN CL-5/16-18x3.00

CL-2-HK-2

CL-11-SW

CL-1/2-13x4.00

CL-4-HK-4

CL-3-SW

JAM NUT (p. 177)

CL-14-FW CL-2-FW

CL-8-JN

CL-3-FW

CL-10-JN CL-5/8-11x4.50 CL-10-HK-10

STUD (p. 189)

CL-4-SW

HAND KNOB (TALL) CL-23C-CS 1 to 1-3/4 MINI CL-23D-CS CL-28-CS STANDARD 1-3/8 to 2-3/4 CL-30-CS CL-32A-CS HEAVY 1-3/8 to 2-1/2 CL-33-CS

Mini Standard Heavy

HAND KNOB (p. 54)

FLAT WASHER (p. 181)

2 3 5 6 5 6

27/32 (2) CL-6-SPG CL-14-FW CL-5-JN CL-5/16-18x3.50 CL-2-HK-2 CL-11-SW 1-11/32 2-19/64 (2) CL-9-SPG CL-2-FW CL-8-JN CL-1/2-13x5.50 CL-4-HK-4 CL-3-SW 2-51/64 2-1/4 (2)CL-11-SPG CL-3-FW CL-10-JN CL-5/8-11x5.50 CL-10-HK-10 CL-4-SW 2-3/4

CAM HANDLE (SHORT)

Cam Handle

CLAMPINGCLAMP STRAP JAM CLAMP FLAT HEIGHT (p. 224) NUT SPRINGS WASHERS SIZE RANGE (p. 177) A PART NO. LENGTH (p. 183) (p. 181) 2 27/32 CL-23C-CS MINI 0 to 1-1/16 CL-6-SPG CL-14-FW CL-5-JN 3 1-11/32 CL-23D-CS 5 2-19/64 CL-28-CS STANDARD 0 to 1-3/8 CL-9-SPG CL-2-FW CL-8-JN 6 2-51/64 CL-30-CS 5 2-1/4 CL-32A-CS HEAVY 0 to 1-3/8 CL-11-SPG CL-3-FW CL-10-JN 6 2-3/4 CL-33-CS

CAM HANDLE (p. 185)

EYE BOLT (p. 184)

CL-11-SW CL-11A-CH CL-31-EB

DOWEL PIN (p. 185) CL-1/4x.62-CADP

CL-3-SW

CL-13-CH CL-50-EB CL-3/8x1.00-CADP

CL-4-SW

CL-14-CH CL-62-EB CL-5/8x1.25-CADP

CAM HANDLE (TALL) CL-23C-CS MINI CL-23D-CS CL-28-CS STANDARD 1-3/8 to 2-3/4 CL-30-CS CL-32A-CS 1-3/8 to 2-1/2 HEAVY CL-33-CS 1 to 1-3/4

Mini Standard Heavy

SHERICAL WASHER (p. 179)

2 3 5 6 5 6

27/32 (2) CL-6-SPG CL-14-FW CL-5-JN CL-11-SW CL-11A-CH CL-32-EB CL-1/4x.62-CADP 1-11/32 2-19/64 (2) CL-9-SPG CL-2-FW CL-8-JN CL-3-SW CL-13-CH CL-51-EB CL-3/8x1.00-CADP 2-51/64 2-1/4 (2)CL-11-SPG CL-3-FW CL-10-JN CL-4-SW CL-14-CH CL-63-EB CL-5/8x1.25-CADP 2-3/4

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 54MF (Rev. 7-02)

HIGH-RISE CLAMPS

Slotted Heel

For clamping taller workpieces. All-in-one clamp construction for quick, safe setups. Modular design allows stacking for height flexibility. Clamp straps slide back for loading clearance. Tapped-nose and gooseneck clamp straps can be reversed to use either end for clamping. The tapped-nose end accepts a contact bolt, while the cylindrical end is ideal for clamping in horizonal holes or narrow slots. The gooseneck strap provides a low clamp profile, and can also be reversed to use the plain end as a tapered-nose clamp.

Mini Standard Heavy

MFHRC P L E R MF402001

A SLOT FOR HEX-HEAD CAP SCREW

E D K HORZ. TRAVEL

Q RANGE J

High-Rise Clamps can be stacked on Narrow Riser Blocks and Spacer Blocks (page 56) to reach tall workpieces.

C MAX

B MIN CLAMPING HEIGHT F S T

H G

SLOTTED HEEL HIGH-RISE CLAMPS K

HEX-HEAD CAP SCREW (1 REQD)

5/32

1/2

3/32

3/8

1/2

CL-MF25-4312*

13/64 1/4

1-9/32 1-19/32

SIZE

A PART NO. B C D E F G H CL-MF25-2051 2-1/2 3/4 1-7/16 1-5/8 1 MINI 1/2 1-7/8 3-3/8 3 CL-MF25-2052 STANDARD CL-MF40-2051 23/32 5-3/4 4 1-1/4 2-3/4 2-3/4 1-9/16 HEAVY CL-MF50-2051 29/32 3-5/8 7-1/4 5 1-1/2 2-15/16 3-9/16 2 * Use CL-MF25-4311 when mounted on a Narrow Riser Block.

F TAPPED HOLE C

Adaptor used in the assembly above. Also allows using other types of clamp straps as high-rise clamps. MFCAA P L E R

Adaptor Base

9/16 CL-MF40-4311 3/16 13/16 13/16 CL-MF50-4311

B E

A IBP

MF401901

IBP

ADAPTOR BASES

Mini Standard Heavy

HEX-HEAD CAP SCREW (1 REQD) SIZE A B C D E F PART NO. G MINI 1 11/32 1 5/16-18 3/32 CL-MF25-4312 CL-MF25-1902 1-7/16 1-5/8 STANDARD CL-MF40-1901 2-3/4 2-3/4 1-9/16 9/16 1-9/16 1/2-13 3/16 CL-MF40-4311 HEAVY 2 11/16 2 5/8-11 3/16 CL-MF50-4311 CL-MF50-1901 2-15/16 3-9/16

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 55MF (Rev. 7-02)

HIGH-RISE CLAMPS

Tapped Nose

Tapped-nose and gooseneck clamp straps can be reversed to use either end for clamping (except mini, which has no cylindrical end). The tapped-nose end accepts a contact bolt, while the cylindrical end is ideal for clamping in horizontal holes or narrow slots. The gooseneck strap provides a low clamp profile, and can also be reversed to use the plain end as a tapered-nose clamp. M TAPPED HOLE

Mini Standard Heavy

IBP

E J DIA

K HORIZONTAL TRAVEL

Q RANGE

Gooseneck

B MINIMUM CLAMPING HEIGHT

C MAX F

IBP T

H G

B MINIMUM CLAMPING HEIGHT

C MAX F

IBP T

H G

Standard Heavy TAPPED-NOSE HIGH-RISE CLAMPS HEX-HEAD CAP SCREW (1 REQD) A SIZE B C D E F G H J K M Q T R S PART NO. — 1 MINI 1-7/8 3-3/8 3-1/2 3/4 1-7/16 1-5/8 1 1 5/16-18 1/2 3/32 3/8 1/2 CL-MF25-4312 CL-MF25-2001 STANDARD CL-MF40-2001 1-3/8 4-1/8 6-5/8 5-7/8 1-5/8 2-3/4 2-3/4 1-9/16 3/4 1-9/16 1/2-13 1-1/4 3/16 13/16 9/16 CL-MF40-4311 HEAVY 2 1 2 5/8-11 1-3/8 3/16 13/16 13/16 CL-MF50-4311 CL-MF50-2001 1-13/16 4-3/8 7-3/8 7-1/2 2 2-15/16 3-9/16

GOOSENECK HIGH-RISE CLAMPS STANDARD CL-MF40-2101 1-3/4 HEAVY CL-MF50-2101 2-3/8

4-3/4 6-5/8 4-5/8 1-3/8 2-3/4 2-3/4 1-9/16 9/16 1-3/8 5-3/8 7-5/8 6-1/2 2 2-15/16 3-9/16 2 11/16 2

__ __

1-1/4 3/16 13/16 9/16 CL-MF40-4311 1-3/8 3/16 13/16 13/16 CL-MF50-4311

M J E A

C D

F K L L

H 2° C

TAPPED-NOSE CLAMP STRAPS

HGB

STUD SIZE E B C SIZE PART NO. A G D F 1 3/8 MINI CL-MF25-2201 5/16-18 3-1/2 3/4 — 5/8 — STANDARD CL-MF40-2201 1/2-13 5-7/8 1-5/8 9/16 13/16 2-9/16 1-3/16 1-3/16 3-1/8 1-7/16 1-9/16 HEAVY CL-MF50-2201 5/8-11 7-1/2 2 13/16 1

GOOSENECK CLAMP STRAPS

G A F

K D

H DIA J M K L — 11/32 1/2 — 5/16-18 3/4 17/32 13/16 5/32 1/2-13 1 11/16 1-1/8 3/16 5/8-11

PART NO. SIZE STANDARD CL-MF40-2202 CL-MF50-2202 HEAVY

STUD SIZE 1/2-13 5/8-11

A B C D E 4-5/16 1-7/16 1-1/16 4 1-3/16 6-5/16 2 2 5-11/16 1-9/16

F 5/8 1

G H J K L 2-1/8 1-9/16 5/32 19/32 17/32 2-3/4 2-3/16 3/16 1 11/16

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 56MF (Rev. 4-01)

HIGH-RISE-CLAMP ACCESSORIES CARBON STEEL, BLACK OXIDE FINISH

F TAPPED HOLE

C E

High Rise Clamp

Narrow Riser Block

A H SLOT FOR HEX-HEAD CAP SCREW

Mini Standard Heavy

NARROW RISER BLOCKS

These Narrow Riser Blocks are used to raise up High-Rise Clamps to reach tall workpieces. Interlocking channels ensure that clamps and risers remain properly aligned when stacked up. Clamps and risers are fastened to the tapped hole on top of the riser block.

SIZE MINI STANDARD HEAVY

PART NO. CL-MF25-2301 CL-MF40-2301 CL-MF50-2301

C F G E B A H 1 13/16 5/16-18 1/16 3/32 1 1-5/8 3 2-3/4 1-9/16 1-3/16 1/2-13 1/8 3/16 2 1-9/16 5/8-11 1/8 3/16 3 3-9/16

HEX-HEAD CAP SCREW (1 REQD) CL-MF25-4312 CL-MF40-4311 CL-MF50-4311

Spacer Block

Mini Standard Heavy SPACER BLOCKS A shorter version of the Narrow Riser Block for raising height only slightly. These blocks also have interlocking channels and can be stacked. Note: A longer hex-head cap screw is required to mount the High-Rise Clamp when using a Spacer Block.

PART NO. SIZE CL-MF25-2351 MINI STANDARD CL-MF40-2351 CL-MF50-2351 HEAVY

Support Holder

A 1/2 1 1

B 1-5/8 2-3/4 3-9/16

C 1 1-9/16 2

Standard Heavy

G 1/16 1/8 1/8

H 3/32 3/16 3/16

30째

IBP

Narrow Riser Block Support Holder

E 13/16 1-3/16 1-9/16

High-Rise Clamp

Adjustable Support

Support Holders allow using an adjustable support as part of a High-Rise-Clamp assembly. Slotted to allow positioning support anywhere within a range. For precision height location, an Extension Support (page 38) can be used instead (always used on mini size). Note: The longest standard hex-head cap screw is required to mount HighRise Clamps when using a Support Holder.

D DIA 11/32 17/32 11/16

MFCBH P L E R

G TAPPED HOLE 5/8 C

1-5/16

1-3/16

MF402401

SIZE PART NO. STANDARD CL-MF40-2401 HEAVY CL-MF50-2401

SUPPORT HOLDERS

IBP

A 5-1/8 6-3/8

E 1-3/16 1-9/16

B 1-9/16 2

C 1-3/16 1-9/16

D 17/32 11/16

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

IBP

F 1-3/16 1-3/8

G 1/2-13 5/8-11

Page 57MF (Rev. 4-01)

SWIVEL CONTACT BOLTS BALL: CHROME STEEL, HEAT TREATED RC 60-67 BODY: 1144 STEEL, HEAT TREATED RC 35-40, BLACK OXIDE FINISH MFSCB P E R

Mini Standard Heavy

MF402501

Swivel Contact Bolts are precision ground for accurate height location, even on sloped surfaces. See page 40 for Height Shims if additional heights are required. Precision swivel ball that can be used as either a contact bolt or rest pad. Ideal for evenly distributing clamping pressure on sloped surfaces. For additional thread sizes, see tooling-component catalog section (page 142).

D SIZE PART NO. A B DIA E MINI CL-MF25-2502 5/16-18 9/16 13/32 1.5000 STANDARD CL-MF40-2501 1/2-13 7/8 5/8 1.8125 HEAVY CL-MF50-2501 5/8-11 1-1/16 13/16 1.0000

F .32 .41 .61

G DIA 15/32 23/32 29/32

CONTACT-BOLT EXTENSIONS 1045 OR 12L14 STEEL, BLACK OXIDE FINISH MFCBE P E MF402601

Mini Standard Heavy

CONTACT-BOLT EXTENSIONS SIZE

PART NO. CL-MF25-2601 CL-MF25-2602 CL-MF25-2603 CL-MF40-2601 CL-MF40-2602 CL-MF40-2603 CL-MF50-2601 CL-MF50-2602 CL-MF50-2603

MINI STANDARD Use with Swivel Contact Bolts to extend their length. Extensions can be stacked to increase length even further.

HEAVY

A 1/2 3/4 1 1-1/4 2 3 1-1/4 2 3

B 13/16 1-1/16 1-5/16 2 2-3/4 3-3/4 2-1/4 3 4

9/16

5/16-18

7/8

1/2-13

1-1/16

5/8-11

STANDARD-ADJUSTABLE SPINDLES CARBON STEEL, ZINC PLATED CLEAR CHROMATE SA P E 516212SA

Mini Standard Heavy

STANDARD-ADJUSTABLE SPINDLES B A PART NO. CL-516212-SA 5/16-18 2-11/16 3-1/4 CL-38314-SA1 3/8-16 STANDARD CL-12314-SA1 1/2-13 3-5/16 4-3/8 HEAVY CL-58438-SA1 5/8-11 SIZE MINI

Long hex-head contact bolt. Fully threaded for maximum adjustment range.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

C 1/2 9/16 3/4 15/16

E 2-1/2 3 3 4

Page 58MF (Rev. 4-01)

UP-THRUST CLAMPS STEEL, WEAR SURFACES HARDENED, BLACK OXIDE FINISH

Up-Thrust Clamps locate off of the part’s top surface and clamp up from below.

Standard

Combination clamp and locator with unique upward clamping action. Pushing down the cam handle pulls the lower jaw upward. This clamps the workpiece against the stationary upper jaw, whose bottom surface is a precision-ground locator. The lower jaw has two clamping surfaces 180° apart, one for thinner parts, the other for thicker parts. The cam handle rotates to screw the lower jaw up or down for fine adjustment.

B C MAX CLAMPING RANGE RANGE FORCE SIZE (LBS) PART NO. A MIN MAX MIN MAX STANDARD CL-MF40-5301 1/2-13 0 1-3/8 1-3/8 2-3/4 2200

SWING CLAMP ASSEMBLIES ARM: DUCTILE IRON ASTM CLASS 60-45-10, ZINC PLATED KNOB: CAST ALUMINUM, BALLS: BLACK PHENOLIC PLASTIC OTHER COMPONENTS: MILD STEEL, BLACK OXIDE FINISH MFSWCA

P L E R Swing Clamp Assembly

Ball Handle

MF401511

Standard Heavy

Knob Handle Long-reach swing clamp that can be hand tightened for medium clamping force. The stop pin furnished can be installed on either side for clockwise or counterclockwise rotation. For additional height, use Clamp Riser Blocks (page 36). For additional, non-modular sizes and more-complete dimensions, see page 206-207 of tooling-component catalog section.

Clamp Riser Block

BALL HANDLE SOCKET-HEAD CAP SCREWS SIZE A (2 REQD) PART NO. B C D E G STANDARD CL-MF40-1511 2-1/2 3-3/4 13/16 1/2 1/2-13 CL-1/2-13x1.50-SHCS 3 HEAVY 4 CL-MF50-1511 4-3/4 1-13/16 1/2 5/8-11 3-3/8 CL-5/8-11x2.00-SHCS

KNOB HANDLE STANDARD CL-MF40-1521 2-1/2 3-1/2 13/16 1/2 1/2-13 CL-1/2-13x1.50-SHCS 3 HEAVY 4 CL-MF50-1521 4-1/2 1-13/16 1/2 5/8-11 3-3/8 CL-5/8-11x2.00-SHCS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 59MF (Rev. 4-01)

HOOK CLAMPS

MFHC P E R

CLAMP BODY: 4135 STEEL, HEAT TREATED, BLACK OXIDE FINISH HOLDER: 1045 STEEL, BLACK OXIDE FINISH

MF405002

G-CAP SCREW

IBP E

F A H

Mini Standard Heavy

C K

Mini Standard Heavy

PRECISION GROUND

IBP

Long Arm Versatile Hook Clamps available with either a plain or tapped arm. The tapped-arm version accepts a wide variety of contact bolts or adjustment spindles to increase clamping range (the tapped arm is also slightly longer). For additional sizes and more-complete dimensions, see pages 204-205 of tooling component catalog section.

B +.0000 -.0010

Tapped Long Arm

LONG-ARM HOOK CLAMPS SIZE MINI STANDARD HEAVY

PART NO. CL-MF25-5002 CL-MF40-5002 CL-MF50-5002

MINI STANDARD HEAVY

CL-MF25-5013 CL-MF40-5013 CL-MF50-5014

A 1 2 2

B DIA .7500 1.0000 1.2500

C 1-7/16 2-1/2 2-7/8

D 2-5/16 3-1/2 3-7/8

E 7/8 1-1/4 1-7/16

F 3/8 11/16 7/8

G 5/16-18x2.00 1/2-13x3.00 5/8-11x3.25

H — — —

J — — —

K 29/32 1-17/32 1-17/32

TAPPED LONG-ARM HOOK CLAMPS 1-3/16 .7500 2-3/8 1.0000 2-3/8 1.2500

1-7/16 2-1/2 2-7/8

2-5/16 3-1/2 3-7/8

7/8 1-1/4 1-7/16

3/8 11/16 7/8

5/16-18x2.00 1/2-13x3.00 5/8-11x3.25

15/16 5/16-18 29/32 1-13/16 1/2-13 1-17/32 1-13/16 5/8-11 1-17/32

Hook Clamps work well in conjunction with Support Cylinders (page 42) or Screw Rest Pads (page 46) to allow clamping directly over a supported point.

MFH P E MF405101

Long-Arm Hook Clamp

Hook-Clamp Holder

Mini Standard Heavy HOOK-CLAMP HOLDERS Riser Cylinder (See p. 40)

SIZE MINI STANDARD

Hook-Clamp Holder

HEAVY

F THREAD PART NO. SIZE CL-MF25-5101 5/16-18 CL-MF40-5101 1/2-13 CL-MF40-5102 CL-MF50-5101 5/8-11 CL-MF50-5102

A 2-1/4 3-1/8 4 3-1/8 4

C 7/8

D DIA 1

1.0000

1-7/16

1-9/16

1.2500

1-3/4

B DIA .7500

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

E 3 4-3/8 5-1/4 4-3/8 5-1/4

G 15/16 1-9/16 1-9/16

Page 60MF (Rev. 8-98)

FORGED ADJUSTABLE CLAMPS FORGED C1045 STEEL, BLACK OXIDE FINISH

D A DIA B 30°

Standard Heavy

Rugged forged steel pivot clamp with an integral heel support. Order components individually (page numbers listed are in the tooling-component catalog section). For additional sizes, see page 209 of the tooling-component catalog section. PART NO.

CLAMP (p. 199)

STUD (p. 189)

SIZE STANDARD CL-8-FAC CL-1/2-13x4.50 HEAVY CL-10-FAC CL-5/8-11x6.00

REMOVABLE BRASS HEEL

FLANGE NUT CLAMP SPRING (p. 178) (p. 183)

CL-3-FN CL-4-FN

CL-9-SPG CL-11-SPG

CLAMPINGHEIGHT A RANGE DIA B C D E F G CL-8-JN 0 to 2-1/16 9/16 4 1-5/8 1-1/8 1-7/16 1-7/16 2-5/16 CL-10-JN 0 to 3 11/16 5-1/2 1-7/8 1-3/8 1-7/8 2 3-1/4 JAM NUT (p. 177)

CAM EDGE CLAMPS BODY: STEEL, WEAR SURFACES HARDENED, BLACK OXIDE FINISH BALL HANDLE: BLACK PHENOLIC PLASTIC

Mini Standard Pivoting-nose edge clamp operated by a cam handle for fast action. Smooth spiral cam locks positively anywhere within its 180° throw. Choice of clockwise or counterclockwise handle rotation to clamp. For additional models, see page 203 of the tooling-component catalog section.

Nose pivots to exert clamping force forward and downward at the same time.

SIZE

PART NO. CL-MF25-5611 MINI CL-MF25-5612 CL-MF40-5611 STANDARD CL-MF40-5612

CLAMPING DIRECTION CLOCKWISE CCW CLOCKWISE CCW

5/16-18 5/32 1-1/8 3-15/16 1-5/8 7/16 15/16 3-1/2 1/2-13 7/32 1-9/16 5-3/4 2-1/2 5/8 1-1/2

K MIN MAX 7/8

MAX CLAMPING FORCE (LBS) HORIZ. VERT.

1-1/4 3/4

1 750 50

1-5/16 1-1/2 1-7/8 1 2-15/16 2 1500 100

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

SOCKET-HEAD CAP SCREW (1 REQ’D) CL-5/16-18x1.00-SHCS CL-1/2-13x1.25-SHCS

Page 61MF (Rev. 7-02)

PIVOTING EDGE CLAMPS BODY: GRAY CAST IRON, ASTM CLASS 40, BLACK OXIDE FINISH JAW: 1045 STEEL, HEAT TREATED RC 40-45, BLACK OXIDE FINISH BOLT: 4135 STEEL, HEAT TREATED, BLACK OXIDE FINISH

Large edge clamp that is ideal for tall workpieces. Pivoting nose pushes forward and downward simultaneously. Can be used to clamp against fixed locators, or against the Downthrust Backstops shown below. Replacement jaws are available.

Standard

3/4 I.D. WASHER

9/16 I.D. WASHER MFPEC P L E R

3/4 2 3-3/4

9/16 2 3-9/16

MF401001

IBP 2-3/16

Heavy

13/16 2

1-3/16

3-1/8

IBP

IBP 6-1/8 3-9/16

5-3/8

IBP 2-15/16 2-3/8

2-3/8

Pivoting Edge Clamps

Standard

IBP

Heavy

PIVOTING EDGE CLAMPS SIZE STANDARD HEAVY

MAX. CLAMPING SOCKET-HEAD FORCE (LBS) CAP SCREWS PART NO. HORIZONTAL VERTICAL (2 OR 4 REQD) CL-MF40-1001 2000 220 (4) CL-1/2-13x2.25-SHCS CL-MF50-1001 4200 730 (2) CL-5/8-11x3.00-SHCS

REPLACEMENT JAW CL-MF40-1011 CL-MF40-1011

3/4 I.D. WASHER

9/16 I.D. WASHER

Standard MFBS P L E R

3/4 2 3-3/4

9/16 2 3-9/16

MF401101

IBP 3-1/8

2-3/8

3-1/8

3-3/8

1-3/16 IBP

7-1/8

5-9/16

Heavy

IBP 2-15/16

Standard Downthrust Backstops

IBP

These backstops slide back and downward to provide downholding force on both sides of the workpiece when used with a matching edge clamp. Use when precise horizontal location is not necessary. Replacement jaws are available.

IBP

SIZE STANDARD HEAVY

Heavy DOWNTHRUST BACKSTOPS SOCKET-HEAD CAP SCREWS PART NO. (2 OR 4 REQD) CL-MF40-1101 (4) CL-1/2-13x2.25-SHCS CL-MF50-1101 (2) CL-5/8-11x3.00-SHCS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

REPLACEMENT JAW CL-MF40-1111 CL-MF40-1111

Page 62MF (Rev. 7-02)

SERRATED EDGE CLAMPS BODY AND NOSE: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH CLAMPING SCREW: 4140 STEEL, HEAT TREATED RC 43-45, BLACK OXIDE FINISH NOSE COVER: ALUMINUM

Mini Standard Heavy

This low-profile clamp is ideal for gripping the side of a workpiece to keep the top clear for machining. Clamps both forward and down simultaneously, by tightening the socket-head screw in the sliding nose with a hex wrench. V-groove in nose is excellent for clamping round parts or corners.

High Nose

Low Nose

High-nose version is best for most applications. Gripping high up on the workpiece, close to the machining plane, provides maximum clamping rigidity. A removable aluminum nose cover is furnished for clamping soft or machined parts without damage.

Low-nose version is ideal for thin parts, with its extra machining clearance.

ADJUSTABLE — HIGH NOSE D

––

PART NO. CL-1-SAC MINI CL-5-SAC CL-45-SAC STANDARD CL-55-SAC CL-65-SAC CL-75-SAC HEAVY CL-95-SAC

C A B 2 1 5/8 3 4 5-1/2 7/8 1-1/2 7-1/8 5-1/2 1-1/4 1-3/4 8-1/4

CL-0-SAC MINI CL-00-SAC CL-40-SAC STANDARD CL-50-SAC CL-60-SAC CL-70-SAC HEAVY CL-90-SAC

2 1 5/8 3 4 5-1/2 7/8 1-1/2 7-1/8 5-1/2 1-1/4 1-3/4 8-1/4

––

1 MINI CL-5-SFC 1-13/16 5/8 STANDARD CL-45-SFC 2-11/16 7/8 1-1/2 HEAVY CL-75-SFC 3-1/2 1-1/4 1-3/4

1 2 2

1-3/4 11/16 3 1 3-1/4 1-1/4

1 MINI CL-0-SFC 1-13/16 5/8 STANDARD CL-40-SFC 2-11/16 7/8 1-1/2 HEAVY CL-70-SFC 3-1/2 1-1/4 1-3/4

1 2 2

1-3/4 11/16 3 1 3-1/4 1-1/4

MINI STANDARD HEAVY

1 CL-5-SDC 2-15/16 5/8 CL-45-SDC 4-3/8 7/8 1-1/2 CL-75-SDC 5-3/4 1-1/4 1-3/4

1 2 2

1-3/4 11/16 3 1 3-1/4 1-1/4

MINI STANDARD HEAVY

1 CL-0-SDC 2-15/16 5/8 CL-40-SDC 4-3/8 7/8 1-1/2 CL-70-SDC 5-3/4 1-1/4 1-3/4

1 2 2

1-3/4 11/16 3 1 3-1/4 1-1/4

SIZE

J K M L G H 1-1/2 1/4 9/32 7/16 1/4 2-1/2 5/32 1-1/4 3-3/16 1-1/4 5/8 5/16 4-11/16 1/4 2-1/8 1/2 6-5/16 3 4-1/2 1-3/8 5/8 3/4 5/16 5/16 7-1/4 4

––

MOUNTING SCREWS (1 OR 2 REQD)

1-3/8 (1) CL-5/16-18x1.12-SHCS

2-1/4 2-1/2 (1) CL-1/2-13x1.50-SHCS 2-9/16 3-9/32 (1) CL-5/8-11x2.00-SHCS –– 3 (2) CL-5/8-11x2.00-SHCS

ADJUSTABLE — LOW NOSE 1/4 9/32 1-1/4 1-1/4 2-1/8 1/2 3 1-3/8 5/8 4

–– –– ––

1-1/2 1/8 1/8 1-3/8 (1) CL-5/16-18x1.12-SHCS 2-1/2 5/32 3-3/16 2-1/4 5/16 4-11/16 1/4 1/4 1/4 2-1/2 (1) CL-1/2-13x1.50-SHCS 6-5/16 2-9/16 4-1/2 3-9/32 (1) CL-5/8-11x2.00-SHCS 5/16 5/16 3/8 5/16 7-1/4 3 (2) CL-5/8-11x2.00-SHCS 1/4

FIXED — HIGH NOSE –– –– ––

–– –– ––

7/16 1/4 1-5/16 5/32 –– 5/8 5/16 1-7/8 1/4 –– 3/4 5/16 2-1/2 5/16 ––

–– 1-15/32 (2) CL-5/16-18x1.00-FHSS –– 2-3/16 (2) CL-1/2-13x1.38-FHSS –– 2-7/8 (2) CL-5/8-11x2.00-FHSS

FIXED — LOW NOSE –– –– ––

–– –– ––

7/16 1/4 1-5/16 5/32 1/8 1/8 1-15/32 (2) CL-5/16-18x1.00-FHSS 5/8 5/16 1-7/8 1/4 1/4 1/4 2-3/16 (2) CL-1/2-13x1.38-FHSS 3/4 5/16 2-1/2 5/16 5/16 3/8 2-7/8 (2) CL-5/8-11x2.00-FHSS

DOUBLE — HIGH NOSE –– –– ––

–– –– ––

7/16 1/4 5/8 5/16 3/4 5/16

2 5/32 –– 2-3/4 1/4 –– 3-3/4 5/16 ––

–– 1-15/32 (2) CL-5/16-18x1.00-FHSS –– 2-3/16 (2) CL-1/2-13x1.38-FHSS –– 2-7/8 (2) CL-5/8-11x2.00-FHSS

DOUBLE — LOW NOSE –– –– ––

–– –– ––

7/16 1/4 5/8 5/16 3/4 5/16

2 5/32 1/8 1/8 1-15/32 (2) CL-5/16-18x1.00-FHSS 2-3/4 1/4 1/4 1/4 2-3/16 (2) CL-1/2-13x1.38-FHSS 3-3/4 5/16 5/16 3/8 2-7/8 (2) CL-5/8-11x2.00-FHSS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 63MF (Rev. 7-02)

SERRATED EDGE CLAMPS M HEX SOCKET Q

M HEX SOCKET Q

IBP

C IBP

1/2

Serrated Adjustable Edge Clamp

A SLOT FOR SOCKET HEAD CAP SCREW

1/16

IBP

45째 H

B 1째

- K RANGE

+ K RANGE

IBP P

45째

L + K RANGE

Low Nose

M HEX SOCKET

D E

IBP

1/16

+ K RANGE

IBP

M HEX SOCKET Q

1/16

(2) MOUNTING HOLES FOR FLAT-HEAD SOCKET SCREWS Q

C D E IBP

F A

F A 45

B L - K RANGE

High Nose

IBP

Low Nose

C D E

L - K RANGE

IBP

(2) MOUNTING HOLES FOR FLAT-HEAD SOCKET SCREWS Q

M HEX SOCKET Q

+ K RANGE

High Nose

1/2

+ K RANGE

Serrated Double Edge Clamp

L - K RANGE

1/16

D E IBP

REMOVABLE NOSE COVER

(2) MOUNTING HOLES FOR FLAT-HEAD SOCKET SCREWS

1/2

Serrated Fixed Edge Clamp

M HEX SOCKET Q

(2) MOUNTING HOLES FOR FLAT-HEAD SOCKET SCREWS

REMOVABLE NOSE COVER

1째

- K RANGE

High Nose

IBP

P + K RANGE

L - K RANGE

IBP

Low Nose

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 64MF (Rev. 7-02)

SCREW-CLAMP ADAPTORS 1018 STEEL, BLACK OXIDE FINISH

Screw-Clamp Adaptor

Extremely useful mounting adaptor for screw clamps. Accepts any of the four types of screw clamp shown below (order separately). These screw clamps all use our patented left-hand-thread swivel feet (the ball end of the body screws into the foot for easy installation and removal). The adaptor has two tapped holes to allow installing a screw clamp at either of two heights. The tapped holes are angled slightly downward to provide some downthrust force. See pages 60, 62-63 and 66 of tooling-component catalog section for complete dimensions and additional sizes of screw clamps.

Mini Standard Heavy

Almost any support can be used together with a Screw Clamp Adaptor. For additional height, a Support Riser Block can be used underneath the adaptor.

SCREW CLAMP ADAPTORS

PART NO. SIZE B A CL-MF25-1251 5/16-18 1-3/4 MINI STANDARD CL-MF40-1251 1/2-13 3-3/8 HEAVY CL-MF50-1251 5/8-11 3-3/8

Knob Shoe Assembly

KSA P E 4KSA

Swivel Screw Clamp

SSC P E 27SSC

Swivel Head Screw

SHS P E 22SHS

TS P E 527TSB

Adjustable-Torque Thumb Screw

E F G H J C D 1 1-1/4 1-3/4 2-1/4 3° 5/8 13/16 3 3-5/8 5° 1-1/8 1-5/16 2 2 3 3-5/8 5° 1-1/8 1-5/16 2 2

SOCKET-HEAD CAP SCREWS (2 EACH REQD) CL-5/16-18x1.12-SHCS CL-5/16-18x1.50-SHCS CL-1/2-13x1.75-SHCS CL-1/2-13x2.75-SHCS CL-5/8-11x2.00-SHCS CL-5/8-11x3.00-SHCS

KNOB SHOE ASSEMBLIES SIZE MINI STANDARD HEAVY

LENGTH THREAD UNDER HEAD HEAD FOOT DIA HEAD HEIGHT DIA SIZE PART NO. 3/4 1-3/4 1/2 2-1/4 5/16-18 CL-4-KSA 1-1/4 2-1/8 3/4 3-9/16 1/2-13 CL-9-KSA 1-1/2 2-3/4 15/16 3-5/16 5/8-11 CL-11-KSA

MINI STANDARD HEAVY

CL-27-SSC CL-35-SSC CL-38-SSC

MINI STANDARD HEAVY

CL-22-SHS CL-29-SHS CL-32-SHS

SWIVEL SCREW CLAMPS 5/16-18 1/2-13 5/8-11

2-3/32 3-1/16 3-3/64

— — —

1/2 3/4 15/16

SWIVEL HEAD SCREWS 5/16-18 1/2-13 5/8-11

2-3/32 3-1/16 3-3/64

3/8 1/2 1/2

1-1/8 1/2 1-1/4 3/4 1-1/4 15/16

ADJUSTABLE-TORQUE THUMB SCREWS CL-527-TSB 5/16-18 MINI STANDARD CL-830-TSB 1/2-13 CL-1030-TSB 5/8-11 HEAVY

2-7/8 3-1/8 3-1/8

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

21/32 7/8 1/2 21/32 1-3/16 3/4 21/32 1-3/16 15/16

Page 65MF (Rev. 7-02)

TOGGLE-CLAMP ADAPTORS 1018 STEEL, BLACK OXIDE FINISH

Mini Standard Heavy

Fixed Adaptor

Either one of these adaptors holds all of the toggle clamps listed below. Fasten clamp to the adaptor using only two socket-head cap screws, the two nearest the clamping point. See page 57 for Standard Adjustable Spindles. For additional height, use Clamp or Support Riser Blocks (pages 36-37). To place a clamp between grid points, use an Extension Support (page 38). See toggleclamp catalog for complete clamp dimensions and specifications.

Slotted Adaptor Fixed adaptor on an Extension Support MFTCA P E R MF405401

SLOTTED ADAPTORS

FIXED ADAPTORS SIZE PART NO. A B MINI CL-MF25-5401 5/16-18 3/4 STANDARD CL-MF40-5401 1/2-13 7/8 HEAVY CL-MF50-5401 5/8-11 7/8

SOCKET-HEAD CAP SCREW (1 REQD) CL-5/16-18x1.12-SHCS CL-1/2-13x1.50-SHCS CL-5/8-11x1.50-SHCS

SIZE PART NO. A C D MINI CL-MF25-5402 5/16-18 3-3/4 2-3/4 STANDARD CL-MF40-5402 1/2-13 4 5-1/4 HEAVY CL-MF50-5402 5/8-11 4-1/4

E 3 4

SOCKET-HEAD CAP SCREWS F (2 or 4 REQD) 2-1/8 (4) CL-5/16-18x1.38-SHCS (2) CL-1/2-13x1.50-SHCS 3 (2) CL-5/8-11x2.00-SHCS

VERTICAL HANDLE TOGGLE CLAMPS SIZE

PART NO. CL-450-VTC CL-452-VTC CL-453-VTC CL-1000-PTC ALL CL-650-VTC CL-652-VTC CL-650-ATC CL-850-VTC CL-2000-PTC

SOCKET-HEAD CAP SCREWS (2 REQD)

STANDARD ADJUSTABLE SPINDLE

CL-1/4-20x.62-SHCS

CL-516212-SA

MAXIMUM CAPACITY CATALOG PAGE (LBS)

500

15TC 48TC

750 1000

16TC 19TC 17TC 52TC

CL-5/16-18x.62-SHCS CL-38314-SA..

CL-5/16-18x.75-SHCS CL-12314-SA..

HORIZONTAL HANDLE TOGGLE CLAMPS CL-450-HTC CL-550-HTC ALL CL-550-AHTC CL-650-HTC

500 750 1000

7TC 7TC 9TC 8TC

CL-1/4-20x.62-SHCS

CL-516212-SA

CL-5/16-18x.62-SHCS CL-38314-SA.. CL-5/16-18x.62-SHCS CL-12314-SA..

PUSH/PULL TOGGLE CLAMPS CL-275-SPC CL-250-SPC ALL CL-200-PC CL-1500-PPC CL-350-SPC

600 800 850 2500

34TC 32TC 36TC 54TC 32TC

CL-5/16-18x.75-SHCS CL-5/16-18x.75-SHCS CL-5/16-18x.75-SHCS

CL-38314-SA

CL-5/16-18x.75-SHCS

TOGGLE EDGE CLAMPS ALL CL-550-ATEC

750

38TC

CL-5/16-18x.62-SHCS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

—

Page 66MF (Rev. 7-05)

POWER WORKHOLDING

Manual Fixture

Same Fixture with Power Workholding

See SWIFTSURE catalog section for electric and air power units. Once installed on a machine tool, one power unit can handle any modular powerworkholding fixture on that machine.

Fixture hose is a unique small-diameter, braided-steel-covered hydraulic hose that is ideally suited for modular-fixturing applications. This hose can be installed in the same tight-fit areas as custom-bent tubing, yet installs as easily as conventional hydraulic hose. Keeping a variety of different-length fixture hoses on hand ensures that virtually any modular power-workholding fixture can be assembled without custom fabrication. CLR-9-FH 9" long CLR-12-FH 12" long CLR-15-FH 15" long CLR-18-FH 18" long CLR-24-FH 24" long

Power workholding and modular fixturing make an excellent combination. Power workholding is an obvious choice to reduce cycle time in high-volume and long-run production. Although clamping speed is an obvious and important advantage, power workholdingâ&#x20AC;&#x2122;s biggest payoff usually is improved workpiece accuracy and the elimination of scrap. The improved workpiece quality is due consistent, controlled clamping, combined with automatically adjusted precision work supports that resist workpiece deformation during machining. Since power clamps can be used easily on modular fixtures, even short-run jobs can greatly benefit from power workholding. From these two examples, you can see that assembling a modular workholder for a powerworkholding operation is basically the same process as that for a manual fixture. There are slight differences in the types of components used to position, clamp, and support the workpiece. Power clamps, supports, and accessories used with modular fixtures can be reused, just as any other modular components. Therefore, modular fixturing is a very inexpensive way to achieve the significant benefits of power workholding: improved part quality and reduced manufacturing time.

For fittings, hoses, gauges, and other accessories, see SWIFTSURE catalog section.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 67MF (Rev. 5-04)

POWER WORKHOLDING MFPWCA

P E R

Clamp Adaptor

MF405501

IBP B

5-1/2

Standard Heavy

One clamp adaptor holds either edge clamps (two sizes), or block clamps (two sizes, each in two different stroke lengths). Always mount with two socket-head cap screws in the adjustment slot. See SWIFTSURE catalog section for complete dimensions and specifications.

2-1/2

IBP

MOUNTING SLOT FOR (2) A SOCKET-HEAD CAP SCREWS

CLAMP ADAPTORS FITS BLOCK PUSH A B SIZE CLAMPS CLR-1511-705-BC STANDARD CL-MF40-5501 1/2-13 7/8 CLR-110-EC CLR-1511-725-BC CLR-310-EC CLR-1513-705-BC CLR-1513-725-BC HEAVY CL-MF50-5501 5/8-11 1-1/8 CLR-310-EC CLR-1513-705-BC CLR-1513-725-BC FITS EDGE CLAMPS

ADAPTOR PART NO.

SOCKET-HEAD CAP SCREWS (2 REQD)

CL-1/2-13x1.50-SHCS

CL-5/8-11x2.00-SHCS

Clamp Adaptor SWEC P L E R R310EC

EDGE CLAMPS

1560 Lbs

3670 Lbs

CLR-110-EC

CLR-310-EC

FORCE CLAMP AT PART NO. 6000 PSI SIZE STANDARD CLR-110-EC 1560 LBS STANDARD CLR-310-EC 3670 LBS & HEAVY

MAXIMUM OPERATING PRESSURE 7500 PSI

SOCKET-HEAD CAP SCREWS (4 REQD) CL-5/16-18x1.50-SHCS CL-5/16-18x2.50-SHCS

Clamp Adaptor SWBC P E R R100BC

BLOCK PUSH CLAMPS

1870 Lbs

4560 Lbs

CLR-1511-705-BC CLR-1511-725-BC

CLR-1513-705-BC CLR-1513-725-BC

CLAMP SIZE PART NO. CLR-1511-705-BC STANDARD CLR-1511-725-BC STANDARD CLR-1513-705-BC & HEAVY CLR-1513-725-BC

CONTACT BOLT PART NO.

FORCE AT 6000 PSI

CLR-400-CB

1870 LBS

MAXIMUM OPERATING PRESSURE

7500 PSI CLR-402-CB

3670 LBS

CLAMPING STROKE 5/16 25/32 5/16 25/32

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

SOCKET-HEAD CAP SCREWS (2 REQD) CL-1/4-20x2.00-SHCS CL-5/16-18x2.50-SHCS

Page 68MF (Rev. 7-02)

POWER WORKHOLDING

MFPWCA

P E R

Swing-Clamp Adaptor

MF405502

5-1/2

One swing-clamp adaptor holds any of eight different swing clamps, either low-profile swing clamps or flange-base swing clamps. Always mount with two socket-head cap screws in the adjustment slot. See SWIFTSURE catalog section for complete dimensions and specifications.

Standard Heavy

4 IBP MOUNTING SLOT FOR (2) A SOCKET-HEAD CAP SCREWS IBP

SWING-CLAMP ADAPTORS FITS FITS SOCKET-HEAD LOW-PROFILE FLANGE-BASE CAP SCREWS (2 REQD) A B SWING CLAMPS SWING CLAMPS SIZE CLR-311-SC CLR-314-SCH CL-1/2-13x1.50-SHCS STANDARD CL-MF40-5502 1/2-13 7/8 CLR-321-SC CLR-324-SCH CLR-511-SC CLR-514-SCH CL-5/8-11x2.00-SHCS CL-MF50-5502 5/8-11 1-1/8 HEAVY CLR-521-SC CLR-524-SCH ADAPTOR PART NO.

Swing-Clamp Adaptor

SWSC P L E R R311SC

LOW-PROFILE SWING CLAMPS

770 Lbs

2090 Lbs

CLR-311-SC CLR-321-SC

CLR-511-SC CLR-521-SC

MAXIMUM FORCE AT CLAMP OPERATING PART NO. 6000 PSI PRESSURE SIZE CLR-311-SC STANDARD CLR-321-SC 770 LBS 7500 PSI & HEAVY CLR-511-SC 2090 LBS CLR-521-SC

SWING DIRECTION CLOCKWISE CCW CLOCKWISE CCW

Swing-Clamp Adaptor

SOCKET-HEAD CAP SCREWS (2 REQD) CL-5/16-18x2.00-SHCS CL-5/8-11x2.50-SHCS

SWSC P L E R R314SC

FLANGE-BASE SWING CLAMPS

540 Lbs

1560 Lbs

CLR-314-SCH CLR-324-SCH

CLR-514-SCH CLR-524-SCH

FORCE MAXIMUM OPERATING AT CLAMP SIZE 3000 PSI PRESSURE PART NO. CLR-314-SCH STANDARD CLR-324-SCH 540 LBS 3000 PSI & HEAVY CLR-514-SCH 1320 LBS CLR-524-SCH

SWING DIRECTION CLOCKWISE CCW CLOCKWISE CCW

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

SOCKET-HEAD CAP SCREWS (4 REQD) CL-1/4-20x1.50-SHCS CL-5/16-18x1.50-SHCS

Page 69MF (Rev. 7-02)

POWER WORKHOLDING See SWIFTSURE catalog section for complete work support dimensions and specifications.

MOUNTING SLOT FOR A SOCKET-HEAD CAP SCREW 6

1200 Lbs Fluid Advanced

1200 Lbs Spring Extended

CLR-201-WS

CLR-001-WS

3-1/4 EXTENDED HEIGHT 3 SUPPORT HEIGHT 2-15/16 RETRACTED HEIGHT

2 CONTACT BOLT CLR-109 CB FIXTURE HOSE CONNECTION

1-1/8 4

7/8

1-5/16

1200-LB WORK SUPPORTS & ADAPTORS Adaptor SIZE STANDARD

ADAPTOR

WORK SUPPORT

CONTACT BOLT

MAXIMUM OPERATING

PART NO. CL-MF40-5504

PART NO. CLR-001-WS OR CLR-201-WS

PART NO. CLR-109-CB

PRESSURE 7500 PSI

FIXTURE HOSE CONNECTION (CAN BE ROTATED 90째 OR 180째)

SOCKET-HEAD CAP SCREW A (1 REQD) 1/2-13 CL-1/2-13x2.00-SHCS

MOUNTING SLOT FOR 4-11/32 EXTENDED A SOCKET-HEAD HEIGHT CAP SCREW 4 SUPPORT 7-1/8 HEIGHT

3-7/8 RETRACTED HEIGHT

3700 Lbs Fluid Advanced

CONTACT 1-1/4 BOLT CLR-405 CB

2-1/8 4-15/16

1-1/2

CLR-410-WS

3700-LB WORK SUPPORTS & ADAPTORS ADAPTOR PART NO. CL-MF40-5505

SIZE STANDARD

Adaptor

FIXTURE HOSE CONNECTION (CAN BE ROTATED 90째 OR 180째)

WORK SUPPORT PART NO. CLR-410-WS

CONTACT BOLT PART NO. CLR-405-CB

MOUNTING SLOT FOR A SOCKET-HEAD CAP SCREW 7-7/8

MAXIMUM OPERATING PRESSURE 7500 PSI

SOCKET-HEAD CAP SCREW A (1 REQD) 1/2-13 CL-1/2-13x2.25-SHCS

C EXTENDED HEIGHT D SUPPORT HEIGHT

E RETRACTED HEIGHT

9000 Lbs Fluid Advanced

9000 Lbs Spring Extended

CLR-121-WS

CLR-700-WS

CONTACT BOLT CLR-405 CB

2 4-13/16

9000-LB WORK SUPPORTS & ADAPTORS SIZE STANDARD

Adaptor

HEAVY

ADAPTOR PART NO. CL-MF40-5506 CL-MF40-5507 CL-MF50-5506 CL-MF50-5507

WORK SUPPORT PART NO. CLR-700-WS CLR-121-WS CLR-700-WS CLR-121-WS

CONTACT BOLT PART NO.

MAXIMUM OPERATING PRESSURE

CLR-405-CB 7500 PSI CLR-405-CB

B 1-7/16 1/2-13 1-5/16 1-7/16 5/8-11 1-5/16

C 5-1/32 5-7/32 5-1/32 5-7/32

D 4-1/2 5 4-1/2 5

E 4-11/32 4-17/32 4-11/32 4-17/32

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

SOCKET-HEAD CAP SCREW (3 REQD) (2)CL-5/16-18x1.00-SHCS (1)CL-1/2-13x2.50-SHCS (2)CL-5/16-18x1.00-SHCS (1)CL-5/8-11x3.00-SHCS

Page 70MF (Rev. 7-02)

Manifold-and-Valve Adaptor

POWER WORKHOLDING MOUNTING HOLES FOR (2) DIA SOCKETHEAD CAP SCREWS

3-1/2 2

7/8 5/8

2 13/16

Manifold

Standard Heavy

(5) 1/4-20 TAPPED MOUNTING HOLES

(2) #10-32 TAPPED MOUNTING HOLES

MANIFOLD-AND-VALVE ADAPTORS

One adaptor holds any of two manifolds, a pallet decoupler, or two sequence valves. See SWIFTSURE catalog section for complete dimensions and specifications.

ADAPTOR SIZE PART NO. STANDARD CL-MF40-5508 HEAVY CL-MF50-5508

FITS FITS FITS PALLET SEQUENCE MANIFOLDS DECOUPLERS VALVES CLR-104-F CLR-420-V CLR-9425-012-PD CLR-106-F CLR-440-V

A DIA 1/2-13 5/8-11

SOCKET-HEAD CAP SCREWS (2 REQD) CL-1/2-13x1.50-SHCS CL-5/8-11x1.50-SHCS

DISTRIBUTION MANIFOLDS 4-Port & 6-Port Distribution Manifolds

SIZE PART NO. STANDARD CLR-104-F & HEAVY CLR-106-F

NUMBER OF PORTS

MAXIMUM OPERATING PRESSURE

SOCKET-HEAD CAP SCREWS (3 REQD)

4 6

7500 PSI

CL-1/4-20x2.00-SHCS

PALLET DECOUPLERS Pallet Decoupler

PART NO. SIZE STANDARD CLR-9425-012-PD & HEAVY

MAXIMUM OPERATING PRESSURE

SOCKET-HEAD CAP SCREWS (2 REQD)

7500 PSI

CL-1/4-20x2.00-SHCS

SEQUENCE VALVES Sequence Valve

SIZE STANDARD & HEAVY

PART NO. CLR-420-V CLR-440-V

ADJUSTMENT RANGE FOR TRIGGER PRESSURE LOW PRESSURE 150-220 PSI NORMAL PRESSURE 1500-6500 PSI

MAXIMUM OPERATING PRESSURE

SOCKET-HEAD CAP SCREWS (2 REQD)

7500 PSI

CL-10-32x1.50-SHCS

A 4

1/2

A 2-1/2

Tooling-Block Pallet Decoupler

Adaptor TOOLING-BLOCK PALLET DECOUPLERS AND ADAPTORS

ADAPTOR PART NO. SIZE CL-MF40-5512 STANDARD CL-MF40-5513 CL-MF40-5514 & HEAVY CL-MF40-5515

FITS TOOLING BLOCK CL-MF40-0711 CL-MF40-0702 CL-MF40-0703 CL-MF40-0704

PALLET DECOUPLER PART NO.

MAXIMUM OPERATING PRESSURE

CLR-402-PD

7500 PSI

A 9-1/2 11-1/2 15-1/2 19-1/2

SOCKET-HEAD CAP SCREWS (4 EACH REQD) CL-1/4-20x2.50-SHCS + CL-5/8-11x1.25-SHCS CL-1/4-20x2.50-SHCS + CL-3/4-10x1.50-SHCS CL-1/4-20x2.50-SHCS + CL-1-8x1.50-SHCS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com