EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
CONTENTS
Introduction
2
EFMA’s Product Stewardship Programme
4
Safety
5 ●
EFMA’s Safety Survey
6
●
Incident analyses
7
●
EFMA’s Safety Seminar
8
●
EFMA’s Guidance Documents
9
Recommendations for the Safe and Reliable Inspection of Atmospheric, Refrigerated Ammonia Storage Tanks, 2002
10
Guidance for Safe Handling and Utilization of Non-Conforming Fertilizers and Related Materials for Fertilizer Producers, 2003
11
Guidance for Safe Handling and Utilization of Non-conforming Solid Fertilizers and Related Materials for Fertilizer Importers, Distributors and Merchants, 2004
12
❍
EFMA’S Leaflet Fertilizer and Fire
13
❍
Guidance Relating to Sea Transport of Ammonium Nitrate Based Fertilizers, 2004
13
❍
Guidance for Transporting Ammonia by Rail, 2005
14
❍
Guidance for the Storage of Hot Ammonium Nitrate Solutions
15
❍
❍
❍
Health
16 ●
Chemical Policy
16
Environment
17
●
Best Available Techniques Booklets
17
●
EFMA’s Environmental Benchmark
19
●
EFMA’s Energy Benchmark
20
●
Good Agricultural Practices
21
●
EFMA’s Codes of Practice
22
●
Energy Use and Greenhouse Gases
23
Prepared by EFMA
1
DISCLAIMER: The information and guidance provided in this document is given in good faith. EFMA, its members and staff accept no liability for any loss or damage arising from the use of this guidance.
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
INTRODUCTION
The European Fertilizer Manufacturers’ Association (EFMA) represents the major nitrogen fertilizer producers in Europe. These producers annually issue a Safety, Health and Environmental (SHE) report on their company activities. Jointly, in EFMA, they work together on many activities with the purpose to enhance the health and safety and environmental performance of the fertilizer industry. These activities are part of EFMA’s Product Stewardship programme. The activities cover the whole value chain, as illustrated below. The programme commits all EFMA members to the following: ●
Fertilizers and their raw materials, additives and intermediate products are processed and manufactured, handled, stored, distributed and used in a safe way,
●
We work according to the highest standards and respect applicable legislation with regard to health, occupational and public safety, environment and security,
●
Our plant nutrients shall satisfy society’s requirements for safe food production and animal feed,
●
We co-operate with the whole supply chain to achieve these targets.
An important part of EFMA’s work is to share information on these activities internally between the member companies as well as with our business partners, the regulators and with the community at large. This report covers the SHE activities of EFMA over the last years and is the first SHE report issued by the association. EFMA aims to issue a SHE report every year.
2
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
Schematic visualisation of the fertilizer value chain
3
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
EFMA’S PRODUCT STEWARDSHIP PROGRAMME
EFMA’s Product Stewardship (PS) programme was officially launched in September 2003. The principle is that the Responsibility for our products goes beyond the fences of our production sites and involves activities in the whole chain: “from cradle to grave” or “from raw material to farmer”. The programme exists as a CD-ROM with guidance on how to implement PS in the company and an audit manual. Auditing is carried out by an independent third party. All EFMA’s SHE activities form part of this PS concept.
4
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
SAFETY
Introduction EFMA member companies strive for zero accidents. The PS programme and EFMA’s guidance documents and activities are tools to achieve this goal. EFMA’s safety principles are summarised below. EFMA’s Safety Principles: 1.
All sites should have a high standard of housekeeping.
2.
All sites should establish annual safety targets with action plans (what, who, when).
3.
All sites should have a safety committee comprising the site manager and members reflecting all levels of the organisation. All employees should participate in safety meetings on a regular basis.
4.
All jobs should be evaluated with respect to safety, and a job safety analysis should be carried out for those jobs that are considered critical. Critical jobs should be described in job procedures, including the prescription for the use of any special personal protective equipment. Employees should be trained accordingly.
5.
A preventive maintenance system should be in place.
6.
Modifications of process systems and process equipment should be approved, based on a systematic review.
7.
A work permit system should be in place for all special work.
8.
An approval system for contractors should be in place.
9.
All accidents and near misses should be reported and investigated, with the subsequent implementation of corrective actions.
10. All sites should have an emergency plan. This plan should be tested at least once every year. The plan should be developed in co-operation with external emergency services. 11. Total commitment of support from the line management is imperative for the above principles to be successfully implemented. 5
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
EFMA’S SAFETY SURVEY
(Note: the high figure in 2001 is the result of the Toulouse explosion but was not related to commercial grade fertilizer material). (Note: LTIR is defined as the number of Injuries per million worked hours leading to the absence from work for 1 day or more (EFMA) or converted to absence from work for 3 days (CEFIC))
Figure 1 LTIR comparison of EFMA’s safety performance with the European Chemical Industry (CEFIC) The Lost Time Injury Rate (LTIR) is a good indicator for safety performance in a company. Since 1996 EFMA has collected the LTIRs of member companies with the purpose to benchmark EFMA against the European Chemical Industry (CEFIC). The graph shows an improving trend over the years. Although the statistics give a favourable impression, the industry has experienced some serious incidents and near-miss incidents. These are seriously examined by the industry to take account of lessons learnt.
6
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
INCIDENT ANALYSES All incidents can be prevented. To avoid suffering to people, environmental pollution, costly damages and production interruptions, EFMA believes that lessons from past incidents must be turned into prevention techniques and best practice standards. With such an objective, the members report incidents to EFMA as part of their rapid alert system. EFMA in turn shares the information with all the members.
EFMA keeps records of all relevant incidents that have happened in the fertilizer industry – in European countries and elsewhere. This information is stored in EFMA’s incident data base. Experts from EFMA member companies analyse these accidents on a regular basis and make recommendations to prevent these accidents from occurring again. Selected themes are part of the annual EFMA Safety Seminar where the members have the opportunity to discuss these accidents and prevention techniques in more detail.
7
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
EFMA’S SAFETY SEMINAR In April 2005 EFMA experts came together in Budapest (Hungary) for the 8th time to exchange information and views on technical, environmental and safety issues. This year’s main theme was Transport including loading and unloading. Previous seminars have dealt with learning from incidents (1997), Ammonia (1998), Nitric Acid (1999), Ammonium Nitrate (2000), Safety Management Systems (2001), Regulatory Issues (2003) and EU legislation related to the Fertilizer Industry (2004).
Members of the 8th EFMA Safety Seminar during a plant visit which is part of the Seminar.
8
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
E F M A’ S G U I D A N C E D O C U M E N T S
Ever since EFMA was established (1987) the members have co-operated in establishing and issuing industry guidance documents and easy-to-read leaflets. These documents are considered best practice standards for safe and environmentally correct operations. The documents are made freely available for anyone interested at EFMA’s website www.efma.org.
9
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
Recommendations for the Safe and Reliable Inspection of Atmospheric, Refrigerated Ammonia Storage Tanks, 2002
Safe storage and operation of Atmospheric Refrigerated Ammonia tanks can only be done if the tank is in a good condition. EFMA’s “Recommendations for the Safe and Reliable Inspection of Atmospheric, Refrigerated Ammonia Storage Tanks” (2002) provides our members with a good method to evaluate their tanks and to take appropriate actions.
10
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
Guidance for Safe Handling and Utilization of Non-Conforming Fertilizers and Related Materials For Fertilizer Producers, 2003
This guidance is intended for fertilizer producers, including blenders. It concerns the safe management of solid non-conforming (i.e. off-spec and reject) fertilizer materials and associated raw materials. During production, deviations in process conditions can lead to the manufacture of off-spec materials and, in the handling activities, fines, deteriorated and contaminated materials may be generated. Some of these materials can be potentially more hazardous than the standard products and, therefore, need to be carefully managed with respect to handling, storage and safe utilisation or disposal.
11
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
Guidance for Safe Handling and Utilization of Non-conforming Solid Fertilizers and Related Materials for Fertilizer Importers, Distributors and Merchants, 2004.
This guidance is intended for fertilizer importers, distributors and merchants. It concerns the safe management of solid non-conforming (i.e. off-spec and reject) fertilizer products (with particular attention to ammonium nitrate based materials) and associated raw materials. During storage and in handling activities, fines, deteriorated and contaminated materials may be generated, some of which can be potentially more hazardous than the standard products and therefore, need to be carefully managed. This guidance offers alternative options which the importers, distributors and merchants should evaluate in relation to their own particular situation and select the most suitable one having carried out a risk assessment. Based on this document EFMA has prepared poster versions in 5 major languages with the basic principles: “Guidance for Handling Non-conforming Ammonium Nitrate Fertilizers in the Distribution Chain�
12
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
EFMA’S Leaflets Fertilizer and Fire
Clear messages enhance safety. In 2003 EFMA developed a “Fertilizer and Fire” leaflet in 5 major languages for display in warehouses based on the recommendations given in the EFMA Handbook on Safe Storage and Handling of AN based fertilizers (1992 under revision). The leaflet gives DOs and DON’Ts to prevent fire or decomposition in warehouses and what to do if such an event happens. Guidance Relating to Sea Transport of Ammonium Nitrate Based Fertilizers, 2004
In 2004 EFMA issued the Guidance Relating to Sea Transport of Ammonium Nitrate Based Fertilizers. This booklet gives guidance to ship’s masters on how to prevent decomposition in a cargo of fertilizers. The guidance also provides checklists for those who are involved in the ship transport of AN based fertilizers.
13
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
Guidance for Transporting Ammonia by Rail, 2005
The Guidance for the transport and handling of ammonia has been drawn up by EFMA with the help and expertise of members in order to secure high safety standards in operations involving ammonia transport. The Guidance deals exclusively with the transport of anhydrous ammonia in rail tank cars. The recommendations made in the Guidance go beyond the requirements of national and international regulations and are recommended for all those involved in the handling and transport of ammonia.
14
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
Guidance for The Storage of Hot Ammonium Nitrate Solutions, 2005
The guidance concerns the storage of hot ammonium nitrate solutions with a concentration in excess of 80% in fixed tanks. The recommendations are not intended for tanks used as process vessels in manufacturing plants. The guidance may also serve to determine the basic safety concept in performing studies and the design of storage tanks related to hot ammonium nitrate solutions.
15
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
HEALTH
Our employees, our customers and users of our products shall be informed and trained when necessary in the safety of operations and any health hazards associated with chemicals and products. All EFMA members issue safety data sheets. These are based on EFMA’s Guidance for the Compilation of Safety Data Sheets for Fertilizer Materials (1996; under revision).
CHEMICAL POLICY In 2003 EFMA together with The Fertilizer Institute (TFI, US) completed a research programme with the aim of collecting toxicological data for 23 fertilizers and their intermediates. Presently EFMA is working to get these fertilizers approved in the voluntary ICCA High Production Volume testing programme. This will be part of the necessary compliance with the new EU chemical policy programme REACH.
16
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
ENVIRONMENT
EFMA members are strongly committed to environmental protection. They operate using “state of the art� technology and the operational practices are continuously improved. As a result, the emissions to air and water have been decreased and the energy efficiency of their processes enhanced to be amongst the best world-wide. BEST AVAILABLE TECHNIQUES
In 1993 EFMA volunteered, as the first industry association, to co-operate with the EU Commission to establish documentation on Best Available Techniques (BAT) for Pollution Prevention and Control for the fertilizer 17
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
industry. Eight BAT booklets for different fertilizer production processes were issued in 1995, in parallel with the EU Commission’s drafting of the IPPC Directive. The booklets describe the production processes; give state of the art techniques for pollution prevention and control and emission levels that are achievable for older existing plants and for modern new plants. A second revised edition of the 8 booklets was issued in 2000. EFMA’s BAT booklets have been used as important input material for the EU BAT Reference Document; Ammonia, Acids and Fertilizers (BATREF AAF). This reference document will be used as a guidance document by local authorities for setting permits to operate as from October, 2007. They are amongst the more “popular” documents issued by EFMA and have been requested by fertilizer companies and regulatory authorities world-wide. This confirms the need to establish common uniform standards on a global basis.
18
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
EFMA’s ENVIRONMENTAL BENCHMARK
EFMA has carried out environmental benchmarking amongst its members on an annual basis since 1996. Data on the emission into air and into water for a great number of components, (e.g. NH3, NOx, N2O, CO2, dust) are gathered and graphically displayed. It enables EFMA to see whether our performances as an industry proceed in a proper direction. In addition it enables our individual members to benchmark themselves.
19
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
EFMA’S ENERGY BENCHMARK
Energy Efficiency Ammonia Production 2000 60 CEC Average
US Average (1998) 55
EFMA Average
50
FSU Average
Best CEC Plant
Best FSU Plant
GJ/t NH3
45
40
EFMA Best 10 Average
35
30
25
Best EFMA Plant 59
57
55
53
51
49
47
45
43
41
39
37
35
33
31
29
27
25
23
21
19
17
15
13
9
11
7
5
3
1
20 Plants
Ammonia is the basis for all nitrogen containing fertilizers. Production is based on the use of gas, oil or coal, and represents by far the most energy consuming part of the fertilizer manufacturing processes. It is therefore important that ammonia production is as energy efficient as possible. Due to the high cost of energy in European countries compared to other regions of the world and due to strict environmental regulations in Europe, the European ammonia producers are amongst the most energy efficient with the lowest emissions. This is evident from recent benchmarking of world-wide ammonia production carried out by independent benchmarking companies. The leading average position of EFMA producers has been confirmed by more recent benchmarks made by IFA.
20
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
GOOD AGRICULTURAL PRACTICES EFMA promotes the correct use of all kinds of fertilizer according to the principles of Good Agricultural Practices. Furthermore, EFMA fully support the principles of Integrated Farm Management (IFM) as a system going beyond Good Agricultural Practices, producing quality affordable food under profitable conditions and with due regard to the environment. Integrated Farm Management is defined by a set of common principles and practices which efficiently contribute to achieve a Sustainable Agriculture.
21
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
EFMA’s CODES OF BEST PRACTICE AGRICULTURE Adequate guidance documents and support material are worked out to ensure efficient operation and minimal risk of environmental impact. In that respect, EFMA published several general guidance documents for product use. Code of practice Nitrogen
The growth and harvest of any crop takes nutrients from the soil reserves which must be replenished. Nitrogenous fertilizers contain the most essential crop nutrient in a high quality mineral form, which can be applied with precision. The objective of this “EFMA code of practice Nitrogen” is to encourage the responsible use of nitrogen containing fertilizer and prevent contamination of the atmosphere or aquatic environment. Code of Practice Urea
For healthy growth, plants depend upon various nutrients of which nitrogen is needed in the largest quantity. With nitrogenous fertilizers, farmers and growers supply nitrogen to the plants in order to achieve optimum crop yields and sustainable agricultural production. These EFMA guidelines focus on the nitrogenous fertilizer urea. They are designed to provide general recommendations for its effective use on agricultural crops under European conditions. 22
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
ENERGY USE AND GREENHOUSE GASES EFMA published a simple leaflet on the production of biomass as a source of renewable energy in order to contribute to informing a large part of civil society on issues related to Sustainable Development and agriculture. It demonstrated that the very positive energy balance of biomass production is greatly increased when using mineral fertilizers, while at the same time the Greenhouse Gas balance is increased accordingly:
Fertilizers stimulate plant growth. When plants are harvested, they contain 5-10 times more energy than was used to make the amount of fertilizer required. Fertilizer can thus be considered a catalyst for the capturing of solar energy. In the same context, when plants are growing, photosynthesis enables significant amounts of CO2 to be captured by the plants. The production and use of fertilizers will reduce the world-wide greenhouse gas emissions if care is taken to utilise plant waste material as an energy source. 23
EFMA SAFETY HEALTH AND ENVIRONMENT REPORT
24
Avenue E. van Nieuwenhuyse, 4 B-1160 Brussels Belgium Tel: +32 2 675 35 50 Fax: +32 2 675 39 61 E-mail: main@efma.be For more information about EFMA visit the web-site www.efma.org
european fertilizer manufacturers association