2. Worktop accessories and processing instructions for splashback panels

2. Worktop accessories and processing instructions

Laminates

From stock we offer a laminate solution for all worktops in the same decors and textures. Details see page 19.

ABS edging

For worktops with chipboard or MDF coreboard, we offer an edging solution from stock. For Feelwood worktops with the synchronised surface textures you will receive in addition ABS edging with an end-grain appearance. Details see page 19.

Splashback panels

Back panels are available in all worktop decors as well as in five contrast decors from stock in the format 4,100×640mm. Back panels are based on an 8mm chipboard and are coated with laminate on both sides (different decors per side). Processing instructions see page 20.

Worktop connectors

16mm MDF worktops and 12mm compact laminate worktops require the use of special fittings. The connectors are adapted to the thickness of the worktop and are available from stock. Details

see page 30.

Fastening set for sinks

This set includes fixing profiles made of solid wood as well as suitable screws for PerfectSense Topmatt worktops. In the case of compact laminate worktops, the profile can be glued together. Details see page 31.

Metal traverse for floor cabinets

Metal traverses have proven to be suitable for cabinet and worktop stabilisation. These also allow the screwing of the worktops onto the floor cabinet. Details see page 32.

Worktop-wall profiles

For worktops based on 38 mm chipboard we offer matching worktop-wall profiles in the format 4,100×25×25mm individually packaged in film. Matching inside and outside corners as well as end cappings are also available from stock. Details

see page 28.

Sealing for corner joints

The sealing protects the corner joint against the penetration of moisture. It is available in grey, white, black and brown. Details see page 33.