2. Worktop accessories and processing instructions Laminates
Worktop connectors
From stock we offer a laminate solution
16 mm MDF worktops and 12 mm compact
for all worktops in the same decors and
laminate worktops require the use of
textures. Details see page 19.
special fittings. The connectors are adapted to the thickness of the worktop and are available from stock. Details see page 30.
ABS edging coreboard, we offer an edging solution
Fastening set for sinks
from stock. For Feelwood worktops
This set includes fixing profiles made of
with the synchronised surface textures
solid wood as well as suitable screws for
you will receive in addition ABS edging
PerfectSense Topmatt worktops. In the
with an end-grain appearance. Details
case of compact laminate worktops, the
see page 19.
profile can be glued together. Details
For worktops with chipboard or MDF
see page 31.
Splashback panels decors as well as in five contrast decors
Metal traverse for floor cabinets
from stock in the format 4,100 × 640 mm.
Metal traverses have proven to be
Back panels are based on an 8 mm
suitable for cabinet and worktop
chipboard and are coated with laminate
stabilisation. These also allow the
on both sides (different decors per side).
screwing of the worktops onto the floor
Processing instructions see page 20.
cabinet. Details see page 32.
Worktop-wall profiles For worktops based on 38 mm chipboard
Sealing for corner joints
we offer matching worktop-wall profiles in
The sealing protects the corner joint
the format 4,100 × 25 × 25 mm individually
against the penetration of moisture. It is
packaged in film. Matching inside and
available in grey, white, black and brown.
outside corners as well as end cappings
Details see page 33.
Back panels are available in all worktop
are also available from stock. Details see page 28.
18
