CATALOGUE GB
NALMAT TRZEBINIA is a manufacturer, distributor and marketer of adhesives, sealants, lubricants and chemical products for the automotive, industrial, consumer and DIY markets.
Brand
In 1985 NALMAT started as a small company which had the idea of producing ready-to-go packs of blister packed adhesives and chemical preparations for use around the house and garages. The company achieved great success in the Polish market and decided to expand its range of products and to create its own trade mark.
At the moment company has a modern production factory, a fully computerized laboratory and cooperates with leading producers of chemical components worldwide. It offers over 160 high quality products under the brand name Technicqll速 which is registrated in the EU and Poland. The products are sold in Poland and exported to 11 countries
means uniqueness , satisfaction and quality guaranteed !
Content EPOXY ADHESIVES ................................................................................................................................................................................... str. 4_ CYANOACRYLATE INSTANT ADHESIVES .................................................................................................................................................. str. 12 SPECIAL ADHESIVES ................................................................................................................................................................................ str. 20 ANAEROBIC ADHESIVES .......................................................................................................................................................................... str. 24 SOLVENT ADHESIVES................................................................................................................................................................................ str. 30 SEALANTS ................................................................................................................................................................................................. str. 38 LUBRICANTS AND PENETRANTS ............................................................................................................................................................. str. 44 CHEMICAL AGENTS .................................................................................................................................................................................. str. 50 ADHESIVE TAPES ...................................................................................................................................................................................... str. 56
EPOXY ADHESIVES STANDARD (syringe) ............................................................................... str. 6 METAL 300 KG (syringe) ......................................................................... str. 6 EPOXY 1 MIN. (syringe) .......................................................................... str. 6 METAL ..................................................................................................... str. 7 UNIWERSAL ........................................................................................... str. 7 5 MINUTES ............................................................................................. str. 7
EPOXY PUTTY UNIWERSAL ........................................................................................... str. 8 AUTOMOTIVE ......................................................................................... str. 9 HOUSEHOLD ........................................................................................... str. 9 METAL ..................................................................................................... str. 9 PLUMBING ............................................................................................. str. 9
EPOXY PASTE PLUMBING ........................................................................................... str. 10 STEEL..................................................................................................... str. 10 ALUMINIUM ......................................................................................... str. 10
EPOXY ADHESIVES
Epoxy adhesives are a major part of the class of adhesives called "structural adhesives". These high-performance adhesives are used in the construction of aircraft, automobiles, bicycles, boats, golf clubs, skis, snowboards, and other applications where high strength bonds are required. Epoxy adhesives can be developed to suit almost any application. They are suitable for bonding nearly all substrates - metal, plastic, glass and ceramic, wood and wood products, and many types of rubber. In general, they have high resistance to physical and chemical influences and in addition they have high long-term stability because they only have a limited tendency to undergo creep. Depending on the type, they can withstand continuous temperatures from 95째C up to 200째C. Cured adhesives are typically hard and rigid and range from brittle to tough depending on CHEMICAL COMPOSITION. How 2-part epoxy adhesives work. Hardening of epoxy mass occurs automatically as a result of a chemical reaction, independently of weather conditions, after mixing two components of the same volume. Bonding time, depending on a kind of adhesive, can vary from several minutes to hours. A joint is thought to obtain full parameters after 24 hours. The Technicqll 2-part epoxy adhesives are offered as semi-fluids, pastes and putties to provide superior performance benefits in applications
Page 5
Epoxy Standard
Epoxy Metal 300kg
EPOXY STANDARD
EPOXY METAL 300kg
Epoxy Standard is a high strength, general purpose epoxy adhesives ideal for complex, multi-piece assemblies. Economical easy to use syringe, eliminates wastage. Bonds rigid materials including ceramic, chrome, wood, fabric, fiberglass, hard plastic, metal and rubber. Fills gaps and will not shrink. When cured, can be painted, drilled, sanded, threaded or filed. Water and solvent resistance.
No. E-402
Blister 2x12ml / Pack 10 pcs
Colour: amber Working time: 60 min. Handling strength : 240 min. (20°C) Final cure: 48 h Shear strength: 10.0 MPa Temperature resistance: -30ºC ÷ 90ºC
Epoxy Metal 300kg has been designed to effect fast repairs to damaged metalwork such as castings, pipes, valves and engines. Economical easy to use syringe, eliminates wastage. Once working strength has been achieved can be painted, machined, drilled, tapped or sawn in the same way as solid metal. High chemical and temperature resistance.
No. E-396
Blister 2x12ml / Pack 10 pcs
Colour: grey Working time: 30 min. Handling strength: 180 min. (20°C) Final cure: 24 h Shear strength: 20.0 MPa Temperature resistance: -30ºC ÷120ºC
Epoxy 1 min.
EPOXY 1 MIN.
EPOXY ADHESIVES
Epoxy 1 MIN. is a transparent, quick curing, versatile, easy-to-use adhesive and filler that eliminates the need for welding or brazing. Economical easy to use syringe, eliminates wastage. Ideal for bonding ceramic, chrome, fabric, fiberglass, glass, hard plastic, metal and rubber. Once cured, can be painted, drilled, sanded, threaded or filed. Water and solvent resistance.
No. E-358
Blister 2x12ml / Pack 10 pcs
Page 6
Colour: transparent Working time: 1 min. Handling strength: 8 min. (20°C) Final cure: 12 h Shear strength: 11.5 MPa Temperature resistance: -30ºC ÷ 80ºC
T-048 Fiberglass Net
For reinforcement joints and epoxy coatings
read more on page 59
Epoxy Glue Metal
EPOXY GLUE METAL
Epoxy Glue Metal is a two-part adhesive and filler ideal for metals, alloys and castings. Once cured, can be painted, drilled, sanded, threaded or filed. Resists water, solvent and most automotive fluids.
P-102 DEGREASER AEROSOL P-959 DEGREASER To get the best connection, all elements for bonding should be clean, dry and free of grease.
Colour: grey Working time: 30 min. Handling strength: 60 min. (20°C) Final cure: 12 h Shear strength:12.0 MPa Temperature resistance: -30ºC ÷ 90ºC
read more on page 54
No. E-143
Blister 2x20ml / Pack 10 pcs
Epoxy Glue Universal
EPOXY GLUE UNIVERSAL
Epoxy 5 min.
EPOXY GLUE 5 MIN.
Colour: beige Working time: 30 min. Handling strength: 60 min. (20°C) Final cure: 12 h Shear strength: 10.0 MPa Temperature resistance: -30ºC ÷ 70ºC
No. E-198
Blister 2x20ml / Pack 10 pcs
Colour: beige Working time: 2 min. Handling strength: 5 min. (20°C) Final cure: 12 h Shear strength:10.0 MPa Temperature resistance: -30ºC ÷ 80ºC
No. E-362
Blister 2x5ml / Pack 20 pcs
Page 7
EPOXY ADHESIVES
Epoxy Glue 5 MIN. is a fast acting structural adhesive ideal for small assembly or repair on most materials. Bonds plastics, composites, steel, ceramics, wood to themselves and one another. Once cured, can be painted, drilled, sanded, threaded or filed. Water and solvent resistance.
Epoxy Glue Universal is a structural adhesive designed for general purpose bonding of a wide variety of materials. Bonds plastics, composites, steel, ceramics, wood to themselves and one another. Once cured, can be painted, drilled, sanded, threaded or filed. Water and solvent resistance. High chemical resistance
Epoxy Mastic 1
UNIVERSAL EPOXY PUTTY
Universal Epoxy Putty is a two part compound designed to make repairs in minutes. Ideal for patching, protecting or building up most base materials, including steel, cast iron, ALUMINUM, stainless steel, glass, wood and ceramics. It can be drilled, tapped, filed and sanded.
No. E-051
Colour: light grey Working time: 5 min. Handling strength: 10 min. (20°C) Final cure: 12 h Temperature resistance: -40ºC ÷ 90ºC
EPOXY PUTTY
Blister 35g / Pack 20 pcs
All epoxy putty available in packs of 200g Page 8
Epoxy Putty RAPID 10 MIN
Repair Epoxy putties of the plasticine consistency are unique adhesives. They were the first and remain the most important products on the offer Technicqll brand. They have thousands of applications. They are irreplaceable in rapid removal of leaks and repairs of cracks, especially in corners and inaccessible places where there is no possibility of using conventional liquid adhesives. Bonding is always associated with application of liquid substances, while the putty consistence allows to form different shapes and thanks to it putties are used for filling losses of native materials. Epoxy putties may be formed like plasticine therefore they are used for reproduction of whole missing elements. Remember about thorough mixing components A + B. This operation is carried out alternatively by kneading and rolling mill.
Epoxy Mastic 2
Epoxy Mastic 3
AUTOMOTIVE EPOXY PUTTY
Automotive Epoxy Putty can stop leaks and make permanent repairs on water pipes and pipe joints, oil and water tanks, fuel lines, carburetors, transmission cases, radiators. Ideal for patching, protecting or building up most materials. It can be drilled, tapped, filed and sanded. Resists water, solvent and most automotive fluids.
No. E-136
Blister 35g / Pack 20 pcs
HOUSEHOLD EPOXY PUTTY
perfect for automotive
Colour: orange Working time: 10 min. Handling strength: 45 min. (20°C) Final cure: 12 h Temperature resistance: -40ºC ÷ 100ºC
No. E-181
Blister 35g / Pack 20 pcs
Epoxy Mastic 4
replaces pins anchors
Colour: light grey Working time: 10 min. Handling strength: 45 min. (20°C) Final cure: 12 h Temperature resistance: -40ºC ÷ 100ºC
PLUMBING EPOXY PUTTY
Plumbing Epoxy Putty has been designed for quick-fix for leaking pipes. Bonds and seals wet surfaces. Ideal for repairs of pipelines, heat exchangers, CH radiators, refrigerating units, siphons. It can be painted, drilled, tapped, filed and sanded.
RESISTANCE FOR ATTRITION
only cold welding
No. E-150
Blister 35g / Pack 20 pcs
ABLE TO GLUE UNDER WATER
perfect for plumbing
3
Colour: blue Working time: 10 min. Handling strength: 40 min. (20°C) Final cure: 12 h Temperature resistance: -40ºC ÷ 100ºC
Page 9
4
5
EPOXY PUTTY
No. E-174
Blister 40g / Pack 20 pcs
Colour: slate Working time: 10 min. Handling strength: 30 min. (20°C) Final cure: 12 h Temperature resistance: -30ºC ÷ 120ºC
1001 APPLICATIONS FOR HOME
Epoxy Mastic 5
METAL EPOXY PUTTY
Metal Epoxy Putty has been designed for rebuilding small engine parts, sealing leaks and filling cracks and voids in metal. Ideal for bonding, patching and building up most materials. Abrasion, water and solvent resistant.
Household Epoxy Putty is ideal for all around the house and general DIY repairs. For bonding, patching, protecting and building up most materials. It can be painted, drilled, tapped, filed and sanded.
RESISTANCE FOR VIBRATION
Epoxy Hydraulic
PLUMBING EPOXY PASTE
Plumbing Epoxy Paste has been designed for repairs pressure pipelines. Contains special agents absorbing water. Irreplaceable in the industry for stopping the leakages. It can be painted, drilled, tapped, filed and sanded.
Epoxy Paste Epoxy pastes are known in the market under such advertising names like: liquid metal, super metal welding in the cold. These names reflect the possibilities of their applications. Manufactured by Nalmat three types of pastes: steel, aluminium and hydraulic ones in packages of small capacity make alternative to costly service repairs and allow for independent and without disassembly removing effects of a failure saving time, health and money.
Colour: light blue Working time: 30 min. Handling strength: 120 min. (20°C) Final cure: 24 h Shear strength: 10.0 MPa Temperature resistance: -40ºC ÷ 100ºC
No. E-570
No. E-532
Pack 500g
Blister 100g / Pack 10 pcs
Super Metal 1
Super Metal 4
STEEL EPOXY PASTE
ALUMINIUM EPOXY PASTE
EPOXY PASTE
Steel Epoxy Paste is ideal for repairs parts and devices damaged by friction, corrosion, cavitation and impact. Contains graphite for self-lubricating. Is very useful for regeneration worn cranks, pumps and rotors. It can be painted, drilled, tapped, filed and sanded.
No. E-433
Blister 100g / Pack 10 pcs
Page 10
Colour: slate Working time: 30 min. Handling strength: 120 min. (20°C) Final cure: 24 h Shear strength: 13.5 MPa Temperature resistance: -40ºC ÷ 100ºC
Aluminum Epoxy Paste is a specially formulated two-part adhesive for use on aluminium alloy, cast iron, steel and non-ferrous metals. Contains glass fibers increasing resistance to cracking. Alu Epoxy is ideal for repair cracked heads and engine blocks, fuel tanks, coolers, oil sumps. It can be painted, drilled, tapped, filed and sanded. .
No. E-648 Pack 500g
No. E-020
Blister 80g / Pack 10 pcs
Colour: silver - grey Working time: 30 min. Handling strength: 120 min. (20°C) Final cure: 24 h Shear strength: 11.0 MPa Temperature resistance: -40ºC ÷ 120ºC
No. E-068 Pack 500g
Page 11
CIA - STANDARD ....................................................................................... str. 14 CIA - CLASSIC ............................................................................................ str. 15 CIA - FINE .................................................................................................. str. 15 CIA - GEL ................................................................................................... str. 15 REMOVER ................................................................................................. str. 15 CIA PREMIUM KIT ............................................................................... str. 16 QUARTZ FILLER ........................................................................................ str. 17 CIA - ACTIVE ............................................................................................. str. 17 CIA - PP & PE SET....................................................................................... str. 17 GEL FOR PP, PE, PTFE ............................................................................... str. 17 CIA - GLASS ............................................................................................... str. 18 CIA - 4406 (INDUSTRY) ............................................................................ str. 18 CIA- 4410 (ELASTIC) ................................................................................ str. 18
CYANOACRYLATE INSTANT ADHESIVES (CIA) Cyanoacrylate adhesives bring a wide variety of performance benefits to the production environment. These benefits include joining dissimilar and hard-to-bond materials, quick curing with very strong adhesion and a wide range of viscosities. Cyanoacrylates are the solution for even the most demanding manufacturing and assembly applications How do cyanoacrylate adhesives work? Cyanoacrylate adhesives cure by reacting with moisture on the surface of the material being bonded. Cyanoacrylates cure in seconds at room temperature and have been formulated to bond flexible or rigid surfaces made from a wide range of materials. The Technicqll Cyanoacrylate Instant Adhesives (CIA) offer extremely fast cure speeds on a wide variety of materials, including plastics, metals, ceramics, rubbers, PP, PE, PTFE.
Page 13
C Second Glue
CIA - STNADARD
Technicqll CIA is a low viscosity general purpose adhesive useful in bonding closely fitting parts. It is fast setting and suitable for use on plastics, rubber and metals.
Viscosity: 40 cP (mPas) Shear strength: 3.5 MPa Max. gap fill: 0.10 mm Temperature resistance: -40ยบC รท 80ยบC
No. C-031
CYANOACRYLATE ADHESIVES
Blister 2g / Pack 20 pcs
One drop is enough No. C-204
Box 2g / Pack 25 pcs
Page 14
No. C-808
Paddle 12x2g / Pack 5 pcs
C Second Glue 1
Super Second Glue 2
CIA - CLASSIC
CIA - FINE
Technicqll CIA-1 is one of the most effective and popular instant adhesives for bonding plastics, rubber, metals and wood. One drop is enough for every 2 cm2. The one-drop nozzle ensures easy application and has a no-clog tip
CIA-2 is a high performance adhesive. Odourless and has no blooming effect on bond lines. For bonding metals, plastics, elastomers, ceramics and wood. The brush in the cup provides excellent surface covering and is ideal for large surfaces and hard-to-reach areas.
Available also in 20g No. C-522 packs
Viscosity: 40 cP (mPas) Shear strength: 3.5 MPa Max. gap fill: 0.10 mm Temperature resistance: -40ºC ÷ 80ºC
No. C-129
Viscosity: 100 cP (mPas) Shear strength: 4.0 MPa Max. gap fill: 0.10 mm Temperature resistance: -40ºC ÷ 80ºC
No. C-990
Blister 5g / Pack 20 pcs
Blister 8g / Pack 20 pcs
REMOVER
An effective and very easy to use colourless gel to remove dried-on residue and dirt coating the cyanoacrylate adhesives from a variety of materials such as metals, wood, glass, plastic, textile. Used for separating glued together fingers and also to clean fingernails after removing artificial tips.
Technicqll CIA-GEL is a thixotropic, fast‐setting adhesive particularly suitable for use on vertical and porous materials. Can be used on metals, plastics, elastomers, ceramics and wood
Viscosity: īHO Shear strength: 3.5 MPa Max. gap fill: 0.25 mm Temperature resistance: -40ºC ÷ 80ºC
No. C-297
Blister 2g / Pack 20 pcs
No. P-093
Blister 4ml / Pack 20 pcs
Page 15
CYANOACRYLATE ADHESIVES
Glue Remover
Second Glue Gel
CIA - GEL
C Cyanoacrytale Repair Set
CIA - PREMIUM KIT
CIA-KIT is an advanced universal adhesive system that combines all of your bonding needs into one easy to use system. This all inclusive kit enables you to bond all materials (including PP, PE, PTFE and other difficult-to-bond materials). Contains SECOND GLUE SECOND GLUE (INDUSTRY) FILLER AKTYWATOR PRIMER REMOVER CLEANER
- cyanoacrylate adhesive for use with an activator and Primer (bottle 4ml). - modified cyanoacrylate adhesive for use with filler (quartz filler) (bottle 8g). - which fills holes, cracks and gaps, evens out surface irregularities, strengthens and reinforces joints (bottle 4ml). - in order to shorten the setting time and to quicken the strength of the bond (bottle 4ml). - for PP, PE PTFE and other difficult-to-bond materials (bottle 4ml). - removes adhesives from hands, upholstery, plastics and many other materials (bottle 4ml). ÄžIRU SUHSDULQJ VXUIDFHV SULRU WR ERQGLQJ ERWWOH PO
The impossible is now possible We have broken the myth that there is no glue for everything.
CYANOACRYLATE ADHESIVES
Cars
Models
No. X-966 Pack 6 pcs
Page 16
Industry
Sport
C Quartz Filler
Second Glue Technic & Activator
QUARTZ FILLER
CIA - ACTIVE
Fine grain quartz for use with cyanoacrylate adhesives. It fills holes, cracks and gaps, evens out surface irregularities, strengthens and reinforces joints.
CIA-Active is a set containing high performance adhesive and activator liquid which cleans, degreases and makes the bonding process rapid.
Viscosity: 40 cP (mPas) Shear strength 10 MPa Max. gap fill: 0.10 mm Temperature resistance: -40ºC ÷ 80ºC
Viscosity: 20 cP (mPas) Temperature resistance: -40ºC ÷ 80ºC
No. C-000
No. X-942
Blister 4ml + 4ml / Pack 20 pcs
Blister 8g + 8ml / Pack 20 pcs
GEL FOR PP, PE, PTFE
A kit for bonding polyolefins and other materials difficult to bond porous surfaces. Does not drip from vertical surfaces. Contains a primer that increases the surface tension of polyolefines and modified cyanoacrylate gel. The gel may be used to bond standard materials without the primer.
CIA-PP Set is a complete set for bonding PP, PE, PTFE, silicone and other difficult-to-bond materials. Contains modified instant adhesive and primer. The primer permits polyolefins (PP,PE), PTFE and silicones to be bonded together. Bonding materials just with adhesive and no primer achieves adherence but no firm bonding.
Viscosity: 40 cP (mPas) Shear strength: 6.0 MPa Max. gap fill: 0.10 mm Temperature resistance: -40ºC ÷ 80ºC
No. X-935
Blister 8g + 8ml / Pack 20 pcs
Viscosity: gel Shear strength 3.0 MPa Max. gap fill: 0.25 mm Temperature resistance: -40ºC ÷ 80ºC
No. C-086
Blister 4g+4ml / Pack 20 pcs
Page 17
CYANOACRYLATE ADHESIVES
Polyolefine Gel
Polyolefine Adhesive
CIA - PP & PE SET
C Super Glass Glue
CIA - GLASS
CIA-GLASS is a high quality adhesive that permanently bonds glass to metal. It is resistant to UV, moisture, temperature and most chemicals. The brush in the cup provides excellent surface covering and is ideal for large surfaces and hard-to-reach areas. A shock absorbent rubber pad is used for bonding the rear view mirror
P-102 DEGREASER AEROSOL P-959 DEGREASER To get the best connection all elements for bonding should be clean, dry and free of grease.
Viscosity: 80 cP (mPas) Shear strength: 3.0 MPa Max. gap fill: 0.10 mm Temperature resistance: -40ºC ÷ 80ºC
read more on page 54 No. C-355
CYANOACRYLATE ADHESIVES
Blister 8g / Pack 20 pcs
Second Glue Technic
Second Glue Elastic
CIA - INDUSTRY
CIA - ELASTIC
CIA-4406 is a high performance adhesive suitable for industrial and quality consumer applications. This low viscosity glue can be used for ready assembled objects that need bonding.
CIA-4410 is a specially formulated adhesive with enhanced flexibility for flexible bond-lines and has improved resistance to vibration. Contains powdered rubber. Its black colour makes CIA-4410 suitable for dark surfaces.
Viscosity: 20 cP (mPas) Shear strength: 4.0 MPa Max. gap fill: 0.10 mm Temperature resistance: -40ºC ÷ 80ºC
No. C-075
Blister 20g / Pack 10 pcs
Page 18
Viscosity: 5000 cP (mPas) Shear strength: 3.0 MPa Max. gap fill: 0.20 mm Temperature resistance: -45ºC ÷ 105ºC
No. C-822 Butle 50g
No. C-839 Butle 500g
No. C-211
Blister 20g / Pack 10 pcs
No. C-884
Butelka 50g / Pack 10 pcs
Page 19
MS-POLIMER GEL .................................................................................... str. 22 CONSTRUCTION GLUE .............................................................................. str. 22 HT SILICATE .............................................................................................. str. 22 RAPID BOND ............................................................................................ str. 23
SPECIAL ADHESIVES Modern design and technological solutions require the use of materials that have better physico-mechanical properties compared to those used in the past. They also require modern, efficient and faster joining techniques, especially where 100% reliability and safety is required. Special adhesives are the latest development in chemical engineering. They are an essential product for modern, high-strength bonds that can connect various material combinations and work in extremely difficult conditions. For several years, special adhesives have been well known and widely used in industry for builders, designers and engineers. With Technicqll 速 brands these excellent special adhesives now come in small, easy-to-dispense packages which make available to households products only previously used in industry
Page 21
X MS Polymer
MS-POLIMER GEL
A premium quality gel formulated using the very latest chemical technology. It combines superb adhesion with excellent sealant characteristics. It is odourless, non-corrosive and bonds and seals primed, painted and bare metal, zinc coatings, aluminum, most woods and most plastics.
&RORXU transparent 7HPSHUDWXUH UHVLVWDQFH -40°C á +90°C )LQDO FXUH 3 mm / 24 h
Characteristic: Silyl modified polymers (abbreviated as SMP or MS polymers) are a relatively new family of one-component materials that combine the advantages of silicones and polyurethanes (called hybrids). They are characterized by excellent adhesion to smooth surfaces without the use of primers. Bonds made with MS polymers are resistant to vibration, impacts and settling. It is also sound absorbent. SMPs are used where high durability is required for bonds and seals where working conditions are unfavorable. The advantages of MS-Polymers: ‡ RGRXUOHVV DQG GRHV QRW FRQWDLQ LVRF\DQDWHV DQG VROYHQWV ‡ (DV\ DQG IDVW DSSOLFDWLRQ ‡ 9HU\ KLJK VWUHQJWK DGKHVLRQ WR PDWHULDOV ZLWKRXW WKH QHHG IRU VSHFLDO SULPHUV ‡ +LJK IOH[LELOLW\ ‡ 5HVLVWDQFH WR DJLQJ 89 UDGLDWLRQ PRLVWXUH VDOW ZDWHU ‡ &DQ EH HYHQ SDLQWHG ZLWK ZDWHU EDVHG SDLQW ‡ 9HU\ JRRG GLHOHFWULF LQVXODWLQJ
No. R-812
Blister 20ml / Pack 20 pcs
Construcion Glue
SPECIAL ADHESIVES
CONSTRUCTION GLUE
Silicate High Temperature
HT SILICATE
+7 6,/,&$7( LV D RQH SDUW DGKHVLYH EDVHG on a modified silicate cement. Specifically designed to permanently repair and seal joints as well as cracks and fissures in fireplaces, ovens and chimneys. It can also be used for repairing and assembling vehicle exhaust systems.
A high quality, one component, ready to use, polyurethane based construction adhesive. It offers high bonding strength and high water resistance (class D4). On curing, the adhesive expands to create a join that fills all gaps.
Complementary product: Reinforcing Mesh T-048 (page 59)
&RORXU light brown 7HPSHUDWXUH UHVLVWDQFH –30° á 80°C )LQDO FXUH 24 h
&RORXU grey 7HPSHUDWXUH UHVLVWDQFH -40°C á 1200°C )LQDO FXUH 24 h
No. R-167
Blister 20ml / Pack 20 pcs
No. R-457
Blister 70ml / Pack 12 pcs
Page 22
No. R-518
&DUWRXFKH PO 3DFN SFV
X Metacryl Adhesive
RAPID BOND
No. X-904
Blister 25ml / Pack 12 pcs
ž&
ž&
20
ž&
10 5 0
Metaakryle
15
Poliuretany
25
Epoksydy
:\WU]\PDåRĞß QD ]U\ZDQLH 03D
The latest achievement of acrylic elastomer chemistry - a two component methacrylate adhesive in an easy-to-use syringe. Ideal for use on the structural joining of metals, composite bonding, plastics and on ceramics where high impact strengths are needed.
:\GĂĄXÄŞHQLH
*
Structural Bonding in modern processes require speed and a very high-quality. One of the most common structural adhesives are those based on the modified ester of methacrylic acid, in short called methacrylate adhesives (MMA). MMA adhesives are based on an innovative two-color dual adhesive system that allows for bonds with a very high tensile, tear and shear strengths. In comparison with conventional structural adhesives such as epoxies, MMA is characterL]HG E\ D KLJKHU WHQVLOH VWUHQJWK XS WR 03D DQG DUH PXFK PRUH IOH[LEOH HORQJDWLRQ DV ZHOO DV KDYLQJ D KLJKHU UHVLVWDQFH WR FRQVWDQW WHPSHUDWXUHV RI XS WR ƒ & DQG WHPSRUDULO\ XS WR ƒ &
Building prototypes and models Airconditioning Windows Building boats and yachts Wind and solar power stations Production of sports equipment Tinkering and household
NIEKTĂ“RE MIEJSCA APLIKACJI Assembly of spoilers, Assembly of side panels and isothermal lines, Assembly of roof, $VVHPEO\ RI *53 SDQHOV IRU VWHHO IUDPHV Bonding aluminium elements to steel ones bonding composites to metal elements assembly of valves and pipe lines bonding frames and closing strips assembly of hull trusses assembly of deck skin assembly of steel strips on edges of wings assembly of warning lightening on windmills assembly of finishing elements assembly of reinforcements sticking information boards on facades
The benefits of using methacrylate adhesives: ‡ ,PSURYHG DHVWKHWLFV HOLPLQDWLQJ ZHOGV ULYHWV DQG VFUHZV ‡ (OLPLQDWHV VTXHDNLQJ ‡ ,QFUHDVHV WKH VWUHQJWK RI WKH ERQG WKURXJK WKH HIIHFWLYH XVH RI WKH FRQWDFW VXUIDFH ‡ 0RUH FUHDWLYH GHVLJQ FRQVWUXFWLRQ UHGXFHG ZHLJKW DQG LQFUHDVHG VWUHQJWK ‡ 5HGXFHG ODERU FRVWV DQG ZRUNLQJ WLPH ‡ 6SHHGLQJ XS SURGXFWLRQ WKURXJK D VKRUW FXULQJ WLPH RI XS WR PLQXWHV WR JHW VWUHQJWK ‡ (DVH RI XVH DQG LPSURYHG XVHU ZRUNHU VDIHW\ ‡ 0XFK JUHDWHU VWUHQJWK DQG JUHDWHU WROHUDQFH RQ XQSUHSDUHG VXUIDFHV DQG VHYHUDO GR]HQ WLPHV faster at binding compared to polyurethane adhesives. The use of methacrylate adhesives: Bonding a variety of materials together in various combinations, 0HWDOV DOXPLQXP FDUERQ VWHHO FRSSHU IHUULWH VWDLQOHVV VWHHO VWDLQOHVV VWHHO SDLQWHG PHWDOV metals clad, galvanized metals. &RPSRVLWHV ILEHUJODVV JHOFRDW 60& %0& SRO\HVWHU ODPLQDWHV ODPLQDWHV HSR[\ YLQ\OHVWHU ODPLQDWHV ODPLQDWHV '&3' 3ODVWLFV $%6 YLQ\O 39& DFU\OLF SOH[LJODVV 300$ SRO\DPLGHV Q\ORQV SRO\FDUERQDWHV polyurethanes
Page 23
SPECIAL ADHESIVES
Structural adhesives are adhesives that can achieve connectivity with a strength equal WR RU FRPSDUDEOH ZLWK WKH FRPELQHG VWUHQJWK RI PDWHULDOV &XUUHQWO\ VWUXFWXUDO ERQGLQJ has become an integral part of the production process and are increasingly displacing traditional joining methods such as brazing, riveting or welding.
SEKTOR Transport (busses, trucks, special and rail vehicles)
THREADLOCKER 6620 ............................................................................. str. 26 ANAEROBIC ADHESIVES 6612 ................................................................ str. 26 THREADLOCKER 6601 ............................................................................. str. 26 RETAINER 6638 ....................................................................................... str. 26 PIPE SEALER PTFE 5572 ........................................................................ str. 27 GASKETMAKER GEL 5518 ........................................................................ str. 27 AKTYWATOR KLEJÓW ANAEROBOWYCH ................................................ str. 28
ANAEROBIC ADHESIVES
Anaerobic adhesives remain liquid until they are isolated from oxygen when, in the presence of metal ions, they are generally used for such purposes as threadlockers, thread sealants, and retaining or gasketing materials. Liquid threadlocking adhesives produce a hard thermoset plastic filling the thread grooves and are the best way to keep threaded assemblies locked and leakproof throughout their service lives. Bolts previously joined with threadlocking adhesive can be reused later as well by removing the old adhesive then applying a new threadlocker before reassembly. Anaerobic thread sealants, meanwhile, are easily applied liquid or paste-like products that seal and lock threads while eliminating the possibility of leaks. Anaerobic retaining compounds allow manufacturers to bond parts in rigid cylindrical assemblies, something that at one time would have required press fits or shrink fits. The use of anaerobic materials allows matching tolerances to be relaxed and rougher surface textures to be used. Another common use for anaerobic adhesives is as formed-in place gaskets for leak-proof sealing of mating flanges. Technicqll’s range of anaerobic adhesives is formulated to provide superior performance benefits in applications with metallic components such as locking threads, retaining bearings, sealing pipe work and flange seal.
Page 25
A Anaerobic Universal
THREADLOCKER 6620
Anaerobic 6612
ANAEROBIC ADHESIVES 6612
UNIVERSAL
Technicqll THREADLOCKER 6620 is an excellent general-purpose anaerobic adhesive. It is used for locking bolts, nuts and screws that may require disassembly for service and repair. Its medium strength allows disassembly with ordinary tools
Technicqll 6612 is an anaerobic adhesive protecting micro-screws against self-unscrewing. Resistant to vibration, irreplaceable in optics, (protection micro-screws in hinges and noses of glasses) watch making, electronics, and assembly of all precise mechanisms.
MEDIUM BONDING STRENGTH
disassembly with hand tools
Viscosity: 800 cP (mPas) Colour: blue Breakaway torque: 17 Nm Set time: 15 min. Temperature resistance: -55ºC ÷ 150ºC
No. A-525
No. A-185
Blister 10g / Pack 10 pcs
Anaerobic 6638
Anaerobic 6601
RETAINER 6638
ANAEROBIC ADHESIVES
THREADLOCKER 6601
Technicqll THREADLOCKER 6601 is medium viscosity an anaerobic adhesive designed to provide permanent locking and sealing of metal parts such as bearings, gears, studs, cylindrical assemblies and other threaded components
RETAINER 6638 is a rapid curing adhesive designed to provide permanent locking and sealing of metal parts such as bearings, gears, pulleys, cylindrical assemblies and threaded components. It exhibits high strength and high viscosity. RETAINER 6638 will help to reduce processing costs Available also in 20g, 50g pack
HIGH BONDING STRENGTH
disassembly with pneumatic tools
Available also in 20g, 50g pack
Viscosity: 2500 cP (mPas) Colour: green Breakaway torque: 25 Nm Set time: 15 min. Temperature resistance: -55ºC ÷ 150ºC
Viscosity: 150 cP (mPas) Colour: green Breakaway torque: 25 Nm Set time: 15 min. Temperature resistance: -55ºC ÷ 150ºC
No. A-235
Page 26
allows to unscrew micro bolts
Viscosity: 500 cP (mPas) Colour: purple Berakaway torque: 5 Nm Set time: 15 min. Temperature resistance: -55ºC ÷ 150ºC
Blister 10g / Pack 20 pcs
Blister 10g / Pack 10 pcs
LOW BONDING STRENGTH
No. A-242
Blister 10g / Pack 10 pcs
HIGH BONDING STRENGTH
disassembly with pneumatic tools
A Anaerobic 5572
PIPE SEALER PTFE 5572
How do anaerobic adhesives work? Anaerobic adhesives cure under the absence of oxygen. Oxygen inhibits the reaction thus preventing cure. When the adhesive is placed in a bond line and the accessibility of oxygen is restricted, the cure proceeds quite rapidly. So that the adhesive does not cure prematurely, the adhesive in its container must remain in contact with oxygen up until the time it is used. This is achieved by using air-permeable plastic bottles which are only half filled and which, prior to filling, are flushed with oxygen.
Technicqll PIPE SEALER 5572 is a high viscosity anaerobic thixotropic gel paste containing PTFE designed to seal threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water. The delayed cure allows the accurate alignment of components. Should disassembly be necessary,
LOW BONDING STRENGTH
disassembly with hand tools
Viscosity: 50.000 cP (mPas) Colour: white Breakaway torque: 5 Nm Set time: 30 min. Temperature resistance: -55ºC ÷ 150ºC
No. A-683
Butle 50g / Op. 10 szt.
No. A-676 Butle 250g
No. A-228
Blister 15g / Pack 10 pcs
Anaerobic 5518
GASKETMAKER GEL 5518 LOW BONDING STRENGTH
allows easy disassembly
Viscosity: 400.000 cP (mPas) Colour: red Breakaway torque: 10 MPa Set time: 15 min. Temperature resistance: -55ºC ÷ 150ºC
No. A-652
Butle 50g / Op. 10 szt.
No. A-669 Butle 250g
No. A-645
Blister 15g / Pack 10 pcs
Page 27
ANAEROBIC ADHESIVES
Technicqll anaerobic Gasket Maker 5518 is a single component, medium strength, thixotropic, anaerobic sealant that cures rapidly. It provides a tough, resilient, solvent and temperature resistant seal that flexes with flange movement caused by vibration, pressurization or thermal changes. Ideal for
A Anaerobic Activator
% full strength
AKTYWATOR KLEJĂ“W ANAEROBOWYCH
100 90 80 70 60 50 40 30 20 10 0
Graph of cure speed
inactive surface active surface whit activator 0
1
2
No. A-192
3
4
5
6
curring time (h)
7
8
9
10
Blister 50ml / Pack 10 szt.
ANAEROBIC ADHESIVES
1 It accelerates the curing of anaerobic adhesives. 2 Essential for inactive materials. 3 Allows you to connect two passive materials. 4 Increases ability to fill gaps. 5 Allows you to connect at low temperatures.
BEHAVIOR ANAEROBIC ADHESIVES ON DIFFERENT SUBSTRATES SUPER ACTIVE (very fast cure)
Brass Copper Magnesium
ACTIVE
(fast cure)
Iron Steel Nickel Aluminum
INACTIVE (slow cure)
Anodized Aluminum Cadmium Finishes Chrome Finishes Stainless Steel Titanium Zinc
PASSIVE
(no cure without Surface Activator)
Ceramics Glass Plastics Painted Finishes
Copper and its alloys will follow the faster cure while oxidised or passivated surfaces, like stainless steel, will tend towards the slower cure . Lower temperatures or large gaps will tend to extend the cure time. To reduce the cure time the use of a Surface Activator or the application of heat can be considered.
Page 28
Page 29
RUBBER GLUE ...................................................................................... str. 32 RIGID PLASTIC GLUE ............................................................................ str. 32 SOFT PLASTIC GLUE ............................................................................. str. 32 SHOE GLUE ........................................................................................... str. 33 ADHESIVE FOR FABRIC ........................................................................ str. 33 UNIVERSAL CONTACT GLUE ................................................................. str. 33 GLUE FOR MODELS ............................................................................... str. 33 WALLPAPER GLUE................................................................................ str. 34 BOOKBINDING GLUE ........................................................................... str. 34 HOUSEHOLD ADHESIVE....................................................................... str. 34 STYROFOAM ADHESIVE ....................................................................... str. 34
MONTAGE ADHESIVES POWER-FIX ........................................................................................... str. 35 PRZEZROCZYSTY .................................................................................. str. 35 EXPRESS-FIX ........................................................................................ str. 35
WOOD ADHESIVES POLIURETANOWY D4 ........................................................................... str. 36 WOOD GLUE – RAPID........................................................................... str. 36 WOOD GLUE.......................................................................................... str. 36
SOLVENT ADHESIVES
These more traditional adhesives are formulated from solvents containing polychloroprene, polyurethane, acrylic, and natural and synthetic rubbers (elastomers). Solvent based adhesives contain significant levels of volatile organic compounds (VOC). These adhesives are applied by brush, roller, and spray or as beads or ribbons either manually or automatically. Solvent based adhesives are available with a variety of drying and bonding times to match the application method and assembly process. These adhesives are typically intermediate in final bond strength and heat resistance so providing a good bond line flexibility. How do solvent base adhesives work? Once the adhesive is applied, the solvent evaporates relatively quickly causing an increase in the viscosity of the adhesive film. Bonds can be made immediately after adhesive application or after some solvent has evaporated but before the adhesive has dried to the point where it will no longer be wet ( the open time ). Waiting for some evaporation prior to bonding ( the set time) increases the initial strength of the adhesive bond and allows assemblies to be processed more quickly.
Page 31
R Natural Rubber
Polychloride
RUBBER GLUE
RIGID PLASTIC GLUE
A highly flexible, natural rubber-based glue. For bonding rubber elements ( e.g. tubes, hoses) and rubber to other materials (e.g. rubber to metal).
A strong, water resistant, clear adhesive designed for bonding most common hard plastics. Suitable for bonding PVC-U, ABS and high impact polystyrene to themselves and each other. It has a wide range of uses for repairing household objects.
Colour: transparent Open time: 5 min. Final cure: 12 h Temperature resistance: -30ºC ÷ 80ºC
Colour: light brown Open time: 10 min. Final cure: 12 h Temperature resistance: -30ºC ÷ 70ºC
No. R-327
No. R-310
Blister 20ml / Pack 20 pcs
Blister 20ml / Pack 20 pcs
Polyurethane 3
SOLVENT ADHESIVES
SOFT PLASTIC GLUE
A high quality, waterproof adhesive for repairing items of virtually all flexible materials. Suitable for bonding flexible PVC, polyurethane, natural and sulfochlorinated rubbers. Typical applications include repairing inflatable, plastic raincoats, tents and waders.
T-294 RUBBER REPAIR TAPE For use with Rubber Glue R-310 and Contact glue R - 266
T-300 PVC REPAIR FOIL
For use on soft PCV with soft Adhesive R - 334
Colour: transparent Open time: 5 min. Final cure: 12 h Temperature resistance: -30ºC ÷ 80ºC
No. R-334
Blister 20ml / Pack 20 pcs
Page 32
read more on page 59
R Polyurethane 4
Fabric Adhesive
SHOE GLUE
ADHESIVE FOR FABRIC
Shoe Glue has been designed for repair of most shoes, especially the ones which are used in difficult conditions (e.g. running shoes). Strong, flexible, weather and impact resistant.
A flexible adhesive designed for the permanent and strong bonding and repairing of various types of fabrics (e.g. curtain laminating and patches for clothes). It leaves a clear bond. The fixed material may be washed at 60 ยฐ C, pressed dry and cleaned.
Colour: white; after cure - colourless Open time: 30 min. Final cure: 12 h Temperature resistance: -20ยบC รท 60ยบC
Colour: transparent Open time: min. Final cure: 12 h Temperature resistance: -30ยบC รท 80ยบC
No. R-341
No. R-116
Blister 20ml / Pack 20 pcs
Blister 20ml / Pack 20 pcs
Plastic Models
Contact Glue
GLUE FOR MODELS
UNIVERSAL CONTACT GLUE
Colour: yellowish/light brown Open time: 10 min. Final cure: 12 h Temperature resistance: -30ยบC รท 80ยบC
No. R-266
Blister 20ml / Pack 20 pcs
Colour: transparent Open time: 5 min. Final cure: 12 h Temperature resistance: -30ยบC รท 60ยบC
No. R-017
Can 325ml / Pack 12 pcs
No. R-130
Blister 20ml / Pack 20 pcs
Page 33
SOLVENT ADHESIVES
A clear and fast-setting adhesive based on polystyrene to bond plastics (except PP, PE, PTFE). A tube with a thin nozzle allows for the precise application of the glue.
A new generation adhesive - universal, flexible and waterproof. For bonding leather, rubber, plastic, metals, cork, felt, plastic and so on.
R Paper Wall Glue
Biblopegistic Glue
WALLPAPER GLUE
BOOKBINDING GLUE
A water-based adhesive designed for spot repair of wallpaper. Has a short open time and high initial grab for immediate bonding. The handy nozzle enables precise application of the adhesive.
A high quality, water-based adhesive specially formulated for paper and bookbinding. When dry it gives a very strong and elastic bond. It has a high viscosity, does not shrink and dries transparent.
Colour: white; after cure - colourless Open time: 10 min. Final cure: 12 h Temperature resistance: -30ºC ÷ 60ºC
Colour: white; after cure - colourless Open time: 10 min. Final cure: 12 h Temperature resistance: -30ºC ÷ 60ºC
No. R-440
No. R-945
Blister 100ml / Pack 12 pcs
Polyvinyl Acetate
HOUSEHOLD ADHESIVE
SOLVENT ADHESIVES
A universal, colourless, easy to use ethanol-based adhesive for every household application. Bonding almost all materials. Safe for sensitive materials (e.g. styrofoam, sponge). For interior and exterior use.
Colour: transparent Open time: 20 min. Final cure: 24 h Temperature resistance: -40ºC ÷ 80ºC
No. R-464
Blister 70ml / Pack 12 pcs
Page 34
Blister 80ml / Pack 12 pcs
Polyvinyl Adhesive
STYROFOAM ADHESIVE
High quality, colourless adhesive based on alcohol and vinyl polyacetate. Designed for delicate materials such as styrofoam, sponge, felt, PU foam, cork, fabrics, leather and paper.
Colour: transparent Open time: 20 min. Final cure: 24 h Temperature resistance: -40ºC ÷ 80ºC
No. R-938
Blister 70ml / Pack 12 pcs
R Montage Transparent
Montage Power Fix
./(- 0217$ฤฏ2:< 35=(=52&=<67<
POWER-FIX
:\VRNLHM MDNRฤ FL NOHM GR V]\ENLHJR รกฤ F]H QLD PDWHULDรกyZ EXGRZODQ\FK L HOHPHQWyZ dekoracyjnych. 3R Z\VFKQLฤ FLX WZRU]\ EH] EDUZQฤ HODVW\F]Qฤ VSRLQฤ Nie uszkadza GHOLNDWQ\FK PDWHULDรกyZ WDNLFK MDN Jฤ END czy styropian.
A ready to use assembly adhesive based on water dispersion. It replaces the use of nails and screws in many applications ( often known as a โ liquid nailโ ). For particular use on porous, water absorbent materials. A joint can be formed immediately after the greater part of the water contained in the adhesive has been absorbed and sticks firm.
Colour: white; after cure - colourless Open time: 7 min. Final cure: 24 h Temperature resistance: -10ยบC รท 60ยบC
Colour: white Open time: 5 min. Final cure: 24 h Temperature resistance: -15ยบC รท 60ยบC
No. R-178
No. R-147
No. R-331
Tube 250ml / Pack 12 pcs
Blister 100ml / Pack 12 pcs
Blister 100ml / Pack 12 pcs
Montage Express Fix
EXPRESS-FIX
MONTAGE ADHESIVES
A ready to use assembly adhesive based on neoprene rubber. It replaces the use of nails and screws in many applications. Has a high initial grab for immediate bonding. Especially for use on non absorbent materials (glass, ceramics, metal, plastic).
Colour: light brown Open time: 5 min. Final cure: 12 h Temperature resistance: -30ยบC รท 60ยบC
No. R-317
Blister 100ml / Pack 12 pcs
No. R-744
Tube 100ml / Pack 12 pcs
No. R-539
Tube 250ml / Pack 12 pcs
No. R-594
Cartouche 300ml / Pack 12 pcs
Page 35
R Polyurethane Wood Glue
Super Wood Glue 1
KLEJ DO DREWNA POLIURETANOWY D4
WOOD GLUE โ RAPID
A water-based, fast curing adhesive for strong bonding of wood and wood derivative materials. Creates invisible joints. Class D3.
Bardzo elastyczny klej na bazie naturalnego kauczuku. Odporny na zmienne warunki atmosferyczne. PrzeznaF]RQ\ GR รกฤ F]HQLD HOHPHQWyZ Z\NRQD Q\FK ] JXP\ UXU\ Zฤ ฤชH L JXP\ ] LQQ\PL PDWHULDรกDPL QS JXPD PHWDO
Colour: white; after cure - colourless Open time: 10 min. Final cure: 12 h Temperature resistance: -30ยบC รท 60ยบC
Colour: light brown Open time: 30 min. Final cure: 24 h Temperature resistance: -30ยบC รท 100ยบC
No. R-850
Blister 30ml / Pack 12 pcs
No. R-123
No. R-161
Bottle 250ml / Pack 12 pcs
Blister 70ml / Pack 12 pcs
Super Wood Glue
WOOD GLUE
WOOD ADHESIVES
An easy to use adhesive made from vinyl copolymers dispersed in water for the strong bonding of wood and wood derived materials. Does not contains harmful solvents. After cure it creates invisible joints. Waterproof class D3.
P-102 DEGREASER AEROSOL P-959 DEGREASER To get the best connection, all elements for bonding should be clean, dry and free of grease.
read more on page 54
Colour: white; after cure - colourless Open time: 10 min. Final cure: 12 h Temperature resistance: -30ยบC รท 60ยบC
No. R-426
Blister 100ml / Pack 12 pcs
Page 36
No. R-631
Bottle 250ml / Op. 12 szt.
Page 37
UNIVERSAL SILIKONE .............................................................................. str. 40 HT SEALANT ............................................................................................. str. 40 SANITARY SEALANT ................................................................................. str. 41 MIRROR SILICON ...................................................................................... str. 41 GLAZING SILICONE .................................................................................. str. 42 BITUMEN SEALANT .................................................................................. str. 42 ACRYL ....................................................................................................... str. 42
SEALANTS
Silicones have special properties compared to other adhesives based on organic polymers because silicones have a different chemical structure. They remain highly elastic at low temperatures as low as -75째C and also have a very good temperature stability (up to 200째C with continuous exposure and up 300째C for short periods). The properties of silicones remain virtually unchanged over this temperature range. Silicones are nearly inert to chemicals and have excellent resistance to moisture and weathering. Bonds made with silicones can, however, only be subjected to relatively small mechanical loads. That is why they are chiefly used as sealants. Due to their low surface tension they cannot be painted. Typical applications include bonding glass and ceramics, metals, plastics, concrete, and brickwork. Special formulations are used in aircraft and aerospace applications. Technicqll offers a highly effective, long lasting sealants available in blisters and cartridges.
Page 39
S Silicone Universal
UNIVERSAL SILIKONE
The most popular acetoxy silicone sealant cures with atmospheric moisture to form a rubber-like seal. Its physical properties are designed to give outstanding durability and performance. Adheres very well to all materials (except PP and PE) and smooth surfaces (glass).
Tack free time: 12-15 min. Temperature resistance: -50ºC ÷ 120ºC Final cure: 2.0 mm / 24h Blister 20ml / Pack 20 pcs
Blister 70ml / Pack 12 pcs
Cartridge 300ml / Pack 12 pcs
20ml No. S-013 70ml No. S-273 300ml No. S-723
white
20ml No. S-072 70ml No. S-003 300ml No. S-730
colorless
20ml No. S-065 70ml No. S-027 300ml No. S-952
grey
20ml No. S-041 70ml No. S-010 300ml No. S-914
brown
20ml No. S-058 70ml No. S-034 300ml No. S-099
black
20ml No. S-037 70ml No. S-280 300ml No. S-105
red
20ml No. S-679 70ml No. S-881 300ml No. S-898
blue
20ml No. S-907 70ml No. S-556 300ml No. S-686
black
Silicone Temperature
HT SEALANT
SEALANTS
HT SEALANT is a high quality ready-to-use product. The applied sealant reacts with atmospheric moisture to produce a highly elastic silicone rubber resistant to aggressive chemical agent and automotive fluids . The product is specifically designed and recommended for high temperature applications.
Tack free time: 7 - 15 min. Temperature resistance: -60ºC ÷ 300ºC Final cure: 3.0 mm / 24h Blister 20ml / Pack 20 pcs
Page 40
Blister 70ml / Pack 12 pcs
Cartridge 300ml / Pack 12 pcs
S Silicone Sanitar
SANITARY SEALANT
A high performance acetoxy silicone sealant containing anti-fungal compounds to prevent mould growth in areas subject to high humidity levels ( e.g. bathroom, kitchen and other sanitary applications).
20ml No. S-389 70ml No. S-089 300ml No. S-365
white
20ml No. S-969 70ml No. S-587 300ml No. S-976
colorless
Tack free time: 10 min. Temperature resistance:-50ºC ÷ 120ºC Final cure: 2.0 mm / 24h Blister 20ml / Pack 20 pcs
Blister 70ml / Pack 12 pcs
Cartridge 300ml / Pack 12 pcs
Mirror Silicone Neutral
MIRROR SILICON
Mirror silicone is a neutral-curing, low modulus 100% silicone sealant. Has outstanding adhesion that provides permanent flexible bonds . Used wherever acetoxy silicones can not be applied. Can be used to fix mirrors onto walls.
How do silicone adhesives works? Single component silicone adhesives require a humidity of 5% to 95% to cure. Besides the presence of humidity, a temperature of between 5 and 40°C is required to cure the adhesive. Complete curing depends on the thickness of the adhesive film and can take several days. The onset of curing is indicated by the formation of a skin. Generally, a few millimeters film of the adhesive fully cures in 24 hours
SEALANTS
Tack free time: 10 min. Temperature resistance: -40ºC ÷ 120ºC Final cure: 2.0 mm / 24h
No. S-096
Blister 70ml / Pack 12 pcs
No. S-372
Cartridge 300ml / Pack 12 pcs
Page 41
S Bitumic Fix
Silicone Glass
BITUMEN SEALANT
GLAZING SILICONE
An acetoxy silicone sealant which cures with atmospheric moisture to form a rubber-like seal for specialized glazing applications, joint sealing and assembly. Excellent weathering and UV resistance. Adheres very well to non-porous substrates (glass, ceramics).
Bitumen sealant is an elastic bitumic mass of perfect adhesion to surfaces (concrete, plaster wood, metal) designed for all outside seals particurarly at all roofer's works. Resistant against atmospheric conditions. white
colorless
300ml No. S-600
300ml No. S-270
Colour: black Tack free time: 24 h Temperature resistance: -20ºC ÷ 70ºC
Tack free time: 10 min. Temperature resistance: -40ºC ÷ 180ºC Final cure: 2.0 mm / 24h
No. B-617
Cartridge 300ml / Pack 12 pcs
Cartridge 300ml / Pack 12 pcs
Silicone Acryl
ACRYL
Application of silicone
ACRYL is a water based general-purpose, flexible sealant that is used for caulking, grouting, jointing and embedding in building construction. Paintable.
SEALANTS
For larger areas pasting vertical bars at intervals of about 10 cm.
Colour: white Tack free time: 15 min. Final cure: 24 h
No. B-112
Cartridge 300ml / Pack 12 pcs
Page 42
Page 43
BRAKE PISTON GREASE ........................................................................... str. 46 CV-JOINTS GREASE ................................................................................... str. 46 BEARING GREASE .................................................................................... str. 46 SYNTHETIC GREASE ................................................................................. str. 46 PTFE GREASE............................................................................................ str. 47 GRAPHITE GREASE ................................................................................... str. 47 PIPE THREAD GREASE .............................................................................. str. 47 VASELINE ................................................................................................. str. 47 SILICONE OIL............................................................................................. str. 48 SILICONE OIL............................................................................................. str. 48 MOLY GREASE ........................................................................................... str. 48 COOPER GREASE .................................................................................... str. 48 BRAKE REPAIR KIT ................................................................................... str. 48 DRY LUBRICANT ....................................................................................... str. 49 TECH-VASELINE ....................................................................................... str. 49 WHITE GREASE ......................................................................................... str. 49 MD-80 ....................................................................................................... str. 49
LUBRICANTS AND PENETRANTS Friction is a part of our everyday life. Nearly every movement we make involves friction, and we have instinctively learned to take advantage of friction- or the lack of friction. Several famous scientists and engineers contributed to our understanding of friction. They include Leonardo da Vinci, Guillaume Amontons, John Theophilus Desaguliers, Leonard Euler, and Charles-Augustin de Coulomb. An important consequence of friction can be wear, which may lead to performance degradation and/or damage to components. Creaking doors and gate hinges, chain grinding ( e.g. in bicycles), squeaky bearings in cars and engine knocks are only some examples that show such problems. It is estimated that tens of thousands tons of the most expensive metals and plastics wear away due to friction fatigue. A common way to reduce friction is by using a lubricant such as oil, water, or grease, which is placed between the two surfaces. Technicqllâ&#x20AC;&#x2122;s high quality greases, packed into plastic tubes, aerosols and concertina bottles, allow you to use a suitable lubricant protecting numerous mechanical components from damage and so save time and money.
Page 45
M Break Grease
BRAKE PISTON GREASE
Ball Link Grease
BRAKE PISTON GREASE
A high-performance extreme pressure grease. Designed for use in constant velocity (CV) joints and other such high-loaded components. The excellent water resistance, high-temperature and anti-corrosive properties allows it to be used in a wide variety of situations. Contains MoS2 that gives enhanced lubrication.
A high quality silicon oil and PTFE-based lubricant used for the repair, assembly and conservation of hydraulic brake components. It is applied thinly and evenly to cylinder sleeves, pistons and seals. Harmless to plastics and rubber.
Colour: black Density: 0.87 g/cm³ Temperature resistance: -30° ÷ 140°C
Colour: white Density: 1.25 g/cm³ Temperature resistance: -40° ÷ 200°C
No. M-577
No. M-799
Tube 100ml / Pack 12 pcs
LUBRICANTS AND PENETRANTS
Blister 6ml / Pack 20 pcs
Bearing Grease
Syntetic Grease
BEARING GREASE
SYNTHETIC GREASE
This premium grease has been designed for lubricating roll and slide bearings. Contains corrosion inhibitors, anti-wear and water-resistant additives.
Colour: light brown Density: 0.88 g/cm³ Temperature resistance: -40° ÷ 160°C
No. M-553
Tube 100ml / Pack 12 pcs
Page 46
Provides excellent protection against rust, corrosion and water washout. It's suited for wheel bearings, ball joint suspensions, steering linkages, king pin and chassis lube points.
Colour: light brown Density:: 0.86 g/cm³ Temperature resistance: -50° ÷ 180°C
No. M-621
Tube 100ml / Pack 12 pcs
Silicone Grease
Graphite Grease
PTFE GREASE
GRAPHITE GREASE
A high quality PFTE-based lubricant for use where mineral greases are not recommended. Especially used for elements exposed to high humidity. Excellent resistance to oxidation and ageing. Protects rubbers from cracking and perishing.
A long-term and high load-carrying graphite based lubricant for splined and screw joints, chains, gear drives, worm gears and slow-moving elements.
Colour: black Density: 0.89 g/cm³ Temperature resistance: -20° ÷ 60°C
Colour: white Density:1.25 g/cm³ Temperature resistance: -40° ÷ 200°C
No. M-607
No. M-591
Tube 100ml / Pack 12 pcs.
A sealing paste for screw joints in water, steam and central heating installations. Facilitates fastening with bolts. Protects against unsealing during setting installations.
Colour: slate Density: 1.30 g/cm³ Temperature resistance: -20° ÷ 100°C
No. M-638
Tube 100ml / Pack 12 pcs
Vaseline Grease
VASELINE
Pure white Vaseline grease. Does not oxidize, harden or stain. Difficult to remove with water. Provides long term lubrication for locks, hinges, threaded locks, technical and household uses. Protects metals against corrosion.
Colour: light yellow Density: 0.82 g/cm³ Temperature resistance: 0º ÷ 30°C
No. M-614
Tube 100ml / Pack 12 pcs
Page 47
LUBRICANTS AND PENETRANTS
Pipe Thread Grease
PIPE THREAD GREASE
Tube 100ml / Pack 12 pcs
M Silicone Oil
Silicone Spray
SILICONE OIL
SILICONE OIL
Workshop Grease
MOLY GREASE
MOLY GREASE is a high performance lubricant for a wide range of high and low-speed application. Fortified with MoS2 it can handle the toughest lubricating jobs.
A high quality silicone oil grease for lubrication and moisture protection. Protects plastics from discoloration and rubbers from cracking and perishing.
Colour: black Density: 0.87 g/cm³ Temperature resistance: -30° ÷ 140°C
Colour: transparent Density: 1.01 g/cm³ Temperature resistance: -50° ÷ 200°C
No. M-778
No. M-419
Blister 50ml / Pack 10 pcs
LUBRICANTS AND PENETRANTS
Blister 50ml / Pack 8 pcs
Cooper Grease
Cooper Lubricant
COOPER GREASE
COOPER GREASE
No. M-560
Blister 50ml / Pack 8 pcs.
Break Repair Set
BRAKE REPAIR KIT
A fast and efficient treatment for contamination and the seizure of hydraulic brake components. The kit contains fast drying degreaser for the cleaning of disc brakes, drum brakes and clutch plates and BRAKE GREASE (M-799).
A general purpose, high temperature grease which allows easy dismantling and assembly. Will form a dense, uniform protective coat. Protects against seizure even in extreme conditions.
Colour: metallic-copper Density: 1.00 g/cm³ Temperature resistance: -30° ÷ 650°C
No. M-792
No. M-829
Blister 50ml +6ml / Pack 10 pcs
Blister 50ml / Pack 8 pcs
No. M-584
Tube 100ml / Pack 12 pcs
Page 48
Dry Lubricant
Technical Vaseline
DRY LUBRICANT
TECH-VASELINE
Dry Lube 100% PTFE lubricant that has been developed to provide long lasting lubrication without staining. It is ideal for most types of material, and is particularly suitable for all areas of lubrication where the attraction of dirt and dust is to be avoided
TECH-VASELINE is based on pure white Vaseline. Hardens to a pasty consistency at room temperature. Water repellent. Protects metals against corrosion.
Colour: white Density: 0.90 g/cm³ Temperature resistance: -50° ÷ 200°C
No. M-747
Colour: transparent Density: 0.78 g/cm³ Temperature resistance: -20° ÷ 50°C
No. M-785
Blister 50ml / Pack 10 pcs
Blister 50ml / Pack 10 pcs
MD-80
A fast multi-purpose rust penetrant with lubricating properties. Displaces moisture and protects against rust and wear. Harmless to plastics and rubber.
A high quality, synthetic grease with PTFE that has been formulated to provide visible lubrication for a wide range of applications. WHITE GREASE is most commonly used during vehicle servicing, for the lubrication of door hinges and check straps
Colour: white Density: 0.91 g/cm³ Temperature resistance: -50° ÷ 200°C
No. M-761
Blister 50ml / Pack 10 pcs
Colour: light brown Density: 0.80 g/cm³ Temperature resistance: -20° ÷ 115°C
No. M-754
Blister 50ml / Pack 10 pcs
Page 49
LUBRICANTS AND PENETRANTS
Penetrate Spray
White Grease
WHITE GREASE
INOX CLEANER .......................................................................................... str. 52 FIRE SCREEN CLEANER ............................................................................ str. 52 PLASTIC CLEANER .................................................................................... str. 52 LEATHER BALSAM ................................................................................... str. 52 IRON CLEANER ......................................................................................... str. 53 ENAMEL FIX FILLER ................................................................................. str. 53 DESCALING AGENT ................................................................................. str. 53 PATINA REMOVER ................................................................................... str. 54 STICKERS REMOVER ................................................................................ str. 54 DEGREASER AEROSOL ............................................................................. str. 54 DEGREASER .............................................................................................. str. 54 CONTACT CLEANER ................................................................................... str. 55 SILVER GLUE ............................................................................................. str. 55 SILVER SEAL ............................................................................................. str. 55 TOBACCO DEODORISER ........................................................................... str. 55
CHEMICAL AGENTS
To realize the vision of the Technicqll brand - “ Household Automotive Technical Kit” the manufacturer had to produce effective chemical solutions for the “battle against dirt”. The best definition of dirt can be found in a popular Encyclopedia: Dirt - different kinds of pollution and impurities, lowering esthetic or functional properties of objects. Dirty objects often change their color, e.g. dust darkness the color of given object. Dirt can have a negative effect on the operation of mechanical devices, damage them and shorten their life. The word “ dirt” triggers negative reactions and is associated with something unpleasant, such as: mess, unpleasant smell and other negative results of passing time which damage the surface of products by: corrosion, various layers, formation of cavities, scratches, decaying ect. Nalmat has a wide range of products which help fight an object’s natural state of degradation and decay. This is particularly true in the production of agents for cleaning the interior and exterior of automobiles.
Page 51
P Enamel Steel Cleaner
Fire Screen Cleaner
INOX CLEANER
FIRE SCREEN CLEANER
An ecological, easy to use and extremely effective cleaner for stainless steel, chromium and nickel plated surfaces. Leaves a protective coating to resist further tainting or marking
No. P-921
Fire Screen Cleaner is a revolutionary non-scratch cleaning paste which simply and safely removes soot and grime built up on the windows of any wood fired heating appliance.
No. P-782
Blister 80ml / Pack 12 pcs
Blister 250ml / Pack 12 pcs
Plastic Balsam
LEATHER BALSAM
A high quality blend of bee wax and natural waxes designed to refinish plastic surfaces. Contains ingredients that repel dust and will guarantee the long term protection.
CHEMICAL AGENTSE
Blister 250ml / Op. 12 szt.
Leather Balsam
PLASTIC CLEANER
No. P-563
Blister 40ml / Pack 10 pcs
Page 52
No. P-755
No. P-348
Blister 100ml / Pack 12 pcs
A unique blend of bee wax and natural oils designed to replenish those natural components found in leather, thereby keeping leather supple, smelling fresh and improving stain resistance.
No. P-549
Blister 40ml / Pack 10 pcs
P Iron Cleaner
Enamel Ceramics Fix
IRON CLEANER
ENAMEL FIX FILLER
An easy to use stick for the quick and effective cleaning of iron plates. Removes burned-on, sticky deposits that can make your iron drag.
Enamel Fix Filler is a high performance two-component enamel used for quick and effective repair. Ensures a smooth professional finish on white, enameled, ceramic, acrylic and lacquered surfaces (e.g. sinks, bath tubs, shower tubs, washing machines and gas cookers).
No. P-488
No. P-805
Blister 30g / Pack 24 pcs
Blister 20g+4g / Pack 10 pcs
Descaling Agent
DESCALING AGENT
An ecological, safe and easy to use agent to remove scale from coffee machines, kettles, irons, moisteners and so on.
No. P-044
Blister 4x14g / Pack 24 pcs
No. P-379
Blister 40g / Pack 12 pcs
CHEMICAL AGENTS
'OD FHOyZ SU]HP\VรกRZ\FK GRVWฤ SQ\ Z RSDNRZDQLDFK NJ
No. P-928
Blister 650g / Pack 6 pcs
Page 53
P Colour Metal Cleaner
PATINA REMOVER
Unglue Etiquettes
STICKERS REMOVER
Patina Remover is an emulsion for the gentle cleaning and polishing of a wide variety of materials such as brass, stainless steel, copper, aluminum and plated surfaces. Creates a bright shiny finish and makes clean-up quick and easy.
A specially formulated agent for penetrating and softening adhesives prior to removal stickers from different surfaces made of materials such as metal, glass, porcelain, wood, rubber and leather.
No. P-997
No. P-501
Blister 60ml / Pack 12 pcs
Blister 20ml / Pack 14 pcs
Technical Remover
DEGREASER AEROSOL
Degreaser Cleaner
DEGREASER
CHEMICAL AGENTS
A high quality, universal solvent for cleaning a variety of surfaces prior to bonding. Leaves no oily film or other contaminants.
No. P-102
Blister 50ml / Pack 10 pcs
Page 54
A high quality, universal solvent for cleaning a variety of surfaces prior to bonding. Leaves no oily film or other contaminants.
No. P-959
Blister 20ml / Pack 14 pcs
P Electronic Conductivity
CONTACT CLEANER
Electronic Glue
SILVER GLUE
A high quality, solvent based electric cleaner which quickly dissolves oxide films and restores full power to electrical components. Protects against oxidation and moisture.
No. P-113
An electric conductive, silver-based adhesive. For electronic and electric use (e.g. the repair of broken circuits of car window).
No. R-082
Blister 50ml / Pack 10 pcs
Blister 2g / Pack 20 pcs
Tabacco Neutralize
Silver Seal
TOBACCO DEODORISER
SILVER SEAL
No. P-495
Blister 20g / Pack 12 pcs
No. P-836
Blister 50ml / Pack 12 pcs
Page 55
CHEMICAL AGENTS
A bottle of unique, light brown, micro granular particles made from high quality essential oils. It has been specially designed for absorbing tobacco odour from ash trays to refresh rooms or vehicle interiors.
A very effective agent containing pure silver powder, fillers and sealing additives. Designed for quick repairs of leaking radiators. Contains silver molecules.
VEHICLE BONDING TAPE ......................................................................... str. 58 ASSEMBLY TAPE ....................................................................................... str. 58 WATERPROOF TAPE.................................................................................. str. 58 ALU TAPE................................................................................................... str. 58 RUBBER REPAIR TAPE ............................................................................. str. 59 PVC REPAIR FOIL ...................................................................................... str. 59 FIBERGLASS NET ...................................................................................... str. 59
TAPES Adhesive tapes often replace and even force out adhesives ( e. g. double-sided tapes - bonding a fixture to a smooth hard substrate). They are easy to use. Adhesive tapes are not only practical for the household and motorization but they are also useful while camping and for sports equipment. For this reason adhesive tapes should be available in cars, households, garages and traveling bags.
Page 57
T Extra Tape 2
VEHICLE BONDING TAPE
Extra Tape 1
ASSEMBLY TAPE
A high strength, double sided tape designed for use on vehicles. Bonds to plastic, metal and painted surfaces. Resistant to UV, water and general cleaning solvent. For interior and exterior use.
A high quality, double sided tape made of flexible PU-foam with a rubber based pressure sensitive adhesive. Easy to apply – simply peel off the backing film and position where required. Sticks to most smooth and hard surfaces including metals, plastic, glass, wood, painted and lacquered surfaces. Highly resistant to water and temperature.
Thickness: 1.0 mm Temperature: 0° ÷ 50°C
Thickness: 1.0 mm Temperature: -20° ÷ 100°C
No. T-709
No. T-693
Blister 1,5m/19mm / Pack 16 pcs
Blister 1,5m/19mm / Pack 16 pcs.
Extra Tape Duct 3
WATERPROOF TAPE
Exhaust Bandage
ALU TAPE
TAPES
A waterproof tape for a wide variety adhesive and sealing applications such as quick temporary repairs of leaks in low pressure water pipes, air lines, protecting electrical wiring, It holds components in place whilst the adhesive cures. Used for many other indoor and outdoor applications.
A shiny aluminum tape with a high temperature-resistant, pressure sensitive adhesive. Can be used in jobs requiring moisture and chemical resistance, thermal conductivity, flame resistance and heat and light reflectance.
Thickness: 0.5 mm Temperature: -20° ÷ 70°C
No. T-716
Blister 3m/50mm / Pack 16 pcs
Page 58
Thickness: 0.5 mm Temperature: -20° ÷ 250°C
No. T-815
Blister 1,2m/50mm / Pack 16 pcs
T Rubber Repair
RUBBER REPAIR TAPE
Repair PVC Foil
PVC REPAIR FOIL
A tape made of a special elastic rubber. Used for fast and strong repairs to cracks and punctures in rubber objects such as hoses and inner tubes. To be used with Rubber Adhesive and Contact Adhesive.
A flexible PVC foil made of high quality, transparent plastic. Ensures quick, strong and invisible repairs. For use on soft PVC with Soft Plastic Adhesive R-334.
Thickness: 0.5 mm Temperature: -20° ÷ 65°C
Thickness: 0.5 mm Temperature: -20° ÷ 70°C
No. T-294
No. T-300
Blister 8,4cm/20cm / Pack 20 pcs
Blister 8,4cm/50cm / Pack 20 pcs
Repair Fiberglass Net
FIBERGLASS NET
A glass net designed for internal reinforcement of joints and adhesive coats. Especially recommended for epoxy and thermal adhesives.
P-102 DEGREASER AEROSOL P-959 DEGREASER To get the best connection, all elements for bonding should be clean, dry and free of grease.
read more on page 54
TAPES
Thickness: 0.5 mm Temperature: -40° ÷ 400°C
No. T-048
Blister 8,4cm/50cm / Pack 20 pcs
Page 59
Display Stands
DISPLAY STANDS
We provide eye-catching products packaged in blisters, marketing materials, exhibition stands and comprehensive technical support.
Page 60
Ę&#x2039; 1 2 3 4 5 6
1
Description
Hight
60 assortment stand 220 cm 40 assortment stand 200 cm 25 assortment stand 180 cm 10 assortment stand 70 cm 6 cm euro hook for 2 blisters 21 cm euro hook for 10 blisters
Wide 100 cm 77 cm 62 cm 47 cm
2 3
4
5
DISPLAY STANDS
6
Page 61
office@technicqll.pl www.technicqll.pl