EN
new products protective hand and footwear q1–q2
2019
EXPLANATION OF SYMBOLS, PROTECTIVE GLOVES
UPDATES FOR EN 388 AND EN 374
EN 388:2016
EN ISO 374-1:2016
Protective gloves against mechanical risks.
Protective gloves against chemicals and microorganisms – Part 1: Terminology and performance requirements for chemical risks.
EN 388:2003 Protective gloves against mechanical risks
EN 407:2004 Protective gloves against thermal risks (heat and/or fire)
EN 511:2006 Protective gloves against cold
EN 374-2:2003 Protective gloves against chemicals and microorganisms - Part 2: Determination of resistance to penetration
EN 374-3:1994 Determination of resistance to permeation by chemicals
EN 421:1994 Protective gloves against radioactive contamination
EN 381-7:1999 Hand-held chainsaw protective gloves
Suitable for contact with foodstuffs
Waterproof membrane
Water repellent
Windproof
Breathable
Cut protection
EN 374-5:2016 Protective gloves against chemicals and microorganisms – Part 5: Terminology and performance requirements for microorganism risks.
EN 374-3:2003 EN 374-3:2003 Protective gloves against This pictogram means that chemicals and microthe glove has failed to attain organisms - Part 3: Level 2 (≥30 minutes) in the Determination of permeation test for three resistance to permeation of the chemicals in the table by chemicals “Chemical list EN 374”
Suitable for contact with foodstuffs, except for fatty foods
Warm lining
Information/UIS
ESD
Latex
Short model
EXPLANATION OF SYMBOLS, PROTECTIVE FOOTWEAR
Aluminium toecap
Steel toecap
Heat-resistant outsole
Wide fit
ESD
Composite toecap
Nail protection in steel
Ergothan Shock Shock absorbing Absorption System
Nail protection in plasma-treated composite (PTC) textile
Winter model
Waterproof
Water repellent
Oil-resistant outsole
ProNose toe reinforcement
Heat-resistant upper
Zipper
Stabilizator
Anti-static properties
Mixed markings on gloves due to the new PPE regulation After 21 April 2019 the new EU regulation 2016/425 will be fully implemented. Customers will receive a mix of products with markings according to the previous Directive 89/686/EEC and the new Regulation (EU) 2016/425 for a time being, depending on our stock level. Remember, the glove performances are the same, the only change is the marking.
EN 388 TEST RESULTS INFORMATION All TEGERA® protective gloves against mechanical risks have been re-tested according to the updated standard EN 388:2016. It’s important to understand that test methods have changed and therefore glove rating may differ, although the glove performance will remain the same. TEGERA® gloves keep the same high quality as before, and the performance of gloves when used will not change.
4443 4x43cp
en 388:2003 en 388:2016 new! impact protection (marking if passed requirements) iso cut test/cut resistance (a-f or x) puncture resistance (0-4) tear resistance (0-4) coup test/cut resistance (0-5 or x) abrasion resistance (0-4)
In the revised version of EN 388:2016, there are two cut resistance test available. The coup method is the same as before and is used for materials that do not dull the blade. For materials that will affect the blade, e.g. most cut resistant materials, TDM test is required. In these cases, the TDM result is the real reference performance while the coup result is only indicative and will therefore be marked with an X. EN 388:2016 – TESTING
(specifies the requirements that apply for each safety level) Level of protection
1
2
3
4
a) Resistance to abrasion (No. of revolutions)
100
500
2 000
8 000
b) Resistance to cutting (Index)
1.2
2.5
5.0
10.0
c) Tear resistance (N)
10
25
50
75
d) Puncturing resistance (N)
20
60
100
150
Level of protection
A
B
C
D
E
F
e) Cut resistance, EN ISO 13997 (N)
2
5
10
15
22
30
Level of protection
P
f) Impact protection, EN 13594:2015
Pass (Level 1 ≤ 9 kN)
3
5
20.0
new!
WARM COMFORT
Soft comfort and durable protection with cold insulation The TEGERA® Infinity™ collection offers excellent fingertip precision, grip, softness, dexterity, and of course, protection.
GOOD GRIP
enabled through crafted foam finish
The new TEGERA® 8810 is a winter-lined glove with high dexterity, comfort and durability. 10 gg acrylic winter liner covered by a 15 gg liner shell.
HIGH DEXTERITY AND FINGERTIP SENSITIVITY
SUPERIOR FORM AND FIT provides
optimized through unique dipping technique
less stress/strain to the hand
COLD INSULATION GLOVES / MEDIUM WEIGHT
TEGERA® 8810 Infinity Synthetic glove, nitrile foam/waterbased PU, palm-dipped, acrylic, nylon, spandex, 10 gg, 15 gg, foam grip pattern, fleece, Cat. II, withstands contact heat up to 100°C, for allround work LINER MATERIAL Acrylic, nylon, spandex, 10 gg, 15 gg DIPPING Palm-dipped DIPPING MATERIAL Nitrile foam/waterbased PU LINING MATERIAL Fleece GRIP PATTERN Foam grip pattern COLOUR Black, yellow SIZE RANGE (EU) 8, 9, 10, 11
FEATURES Withstands contact heat up to 100°C, approved for handling foodstuffs, anatomically designed PROPERTIES High level of protection, good fingertip sensitivity, flexible, durable, good grip, extra comfortable
AVAILABLE FROM APRIL 2019
PRIMARY ENVIRONMENTS OF USE Dry environments, cold environments, dirty environments
PAIRS PER PACKAGE/CARTON 6/120 DISPLAY Hook
Cat. II
EN 388:2016 4221X
EN 407:2004 X1XXXX
I
EN 511:2006 X2X
4
N
F
I
N
I
T
Y
TM
INFINITY ™ CUT LEVEL F Highest cut protection level with touchscreen capability
TOUCHSCREEN CAPABILITY
TEGERA® Infinity™ is next-generation safety gloves with an unique manufacturing process that allows us to combine state-of-the-art coating material with extra-soft and protective fibers. It’s a matter of getting the knit, dip and yarn working together to offer a sensational level of smooth fingertip control. Now with highest cut resistance level F.
SUPERIOR SOFTNESS AND DEXTERITY
from innovative CRF® technology
REINFORCED FOR EXTRA DURABILITY AND PROTECTION
CUT RESISTANT GLOVES / HEAVY WEIGHT
CUT F
TEGERA® 8814 Infinity Cut resistant glove, nitrile foam/waterbased PU, palm-dipped, basalt fibre thread, CRF® Technology, stainless steel fibre yarn, nylon, spandex, 13 gg, foam grip pattern, cut resistance level F, Cat. II, withstands contact heat up to 100°C, anatomically designed, for heavy work LINER MATERIAL Basalt fibre thread, CRF® Technology, stainless steel fibre yarn, nylon, spandex, 13 gg DIPPING Palm-dipped DIPPING MATERIAL Nitrile foam/waterbased PU GRIP PATTERN Foam grip pattern COLOUR Black SIZE RANGE (EU) 6, 7, 8, 9, 10, 11
FEATURES Cut resistant according to 388:2016 level F, withstands contact heat up to 100°C, approved for handling foodstuffs, for touchscreen, anatomically designed PROPERTIES Highest level of protection, very durable, good grip, perfect fit PRIMARY ENVIRONMENTS OF USE Cut risk environments, dry environments, moist environments, dirty environments
PAIRS PER PACKAGE/CARTON 6/120 DISPLAY Hook
I
Cat. II
EN 388:2016 4X43F
N
F
I
N
I
T
Y
TM
EN 407:2004 X1XXXX
5
AVAILABLE FROM APRIL 2019
DYNEEMA DIAMOND TECHNOLOGY ®
Our thinnest cut-resistant gloves yet
The highly succesful TEGERA® 909 is now available in new colours. We present three ultra-thin, cut-resistant TEGERA® gloves made with Dyneema® Diamond Technology, which provides superior dexterity and fingertip sensitivity. Three gloves made for precision work in different types of environments.
Gloves made with Dyneema® Diamond Technology achieve the same cut performance as comparable conventional products – but with much thinner fibers. The result is gloves that are lighter, cooler, and more flexible.
BETTER FEEL AND CONTROL
through thin fiber material
KEEP HANDS COOL AND REDUCE RISK OF INJURIES
through breathable fabric
SUPERIOR FORM AND FIT
provides less stress/strain to the hand
DY N
®
DY N
GY O
GY O
OND TE CH DIAM NO L
MA EE
®
MA EE
OND TE CH DIAM NO L
CUT RESISTANT GLOVES / LIGHT WEIGHT
CUT B
TEGERA® 905 Cut resistant glove, PU, palm-dipped, Dyneema® Diamond Technology, Lycra®, nylon, 18 gg, smooth finish, cut resistance level B, Cat. II, oil and grease resistant palm, for precision work LINER MATERIAL Dyneema® Diamond Technology, Lycra®, nylon, 18 gg DIPPING Palm-dipped DIPPING MATERIAL PU GRIP PATTERN Smooth finish COLOUR White SIZE RANGE (EU) 5, 6, 7, 8, 9, 10, 11
FEATURES Cut resistant according to 388:2016 level B, water and oil repellent palm, steel-fibre free, fibreglass-free
PU COATING
PROPERTIES Extremely good fingertip sensitivity, extra flexible, breathable
CUT B WITH EXCELLENT FINGERTIP SENSITIVITY
PRIMARY ENVIRONMENTS OF USE Cut risk environments, clean environments
LENGTH RANGE 210-250mm PAIRS PER PACKAGE/CARTON 12/120
CLEAN ENVIRONMENTS
®
DY N
GY O
DY N
EN 388:2016 3X42B
GY O
OND TE CH DIAM NO L
Cat. II
OND TE CH DIAM NO L
MA EE
®
MA EE
CUT B TEGERA® 906 Cut resistant glove, PU, palm-dipped, Dyneema® Diamond Technology, Lycra®, nylon, 18 gg, smooth finish, cut resistance level B, Cat. II, oil and grease resistant palm, for precision work LINER MATERIAL Dyneema® Diamond Technology, Lycra®, nylon, 18 gg DIPPING Palm-dipped DIPPING MATERIAL PU GRIP PATTERN Smooth finish COLOUR Black SIZE RANGE (EU) 5, 6, 7, 8, 9, 10, 11
FEATURES Cut resistant according to 388:2016 level B, water and oil repellent palm, steel-fibre free, fibreglass-free PROPERTIES Extremely good fingertip sensitivity, extra flexible, breathable
PU COATING
PRIMARY ENVIRONMENTS OF USE Cut risk environments, dirty environments
CUT B WITH EXCELLENT FINGERTIP SENSITIVITY
LENGTH RANGE 210-250 mm PAIRS PER PACKAGE/CARTON 12/120
DIRTY ENVIRONMENTS
®
DY N
GY O
DY N
EN 388:2016 3X42B
GY O
OND TE CH DIAM NO L
Cat. II
OND TE CH DIAM NO L
MA EE
®
MA EE
CUT B TEGERA® 929 Cut resistant glove, nitrile, nitrile foam, palm-dipped, Dyneema® Diamond Technology, nylon, spandex, 18 gg, foam grip pattern, cut resistance level B, Cat. II, oil and grease resistant palm, fibreglass-free, soft, for precision work LINER MATERIAL Dyneema® Diamond Technology, nylon, spandex, 18 gg DIPPING Palm-dipped DIPPING MATERIAL Nitrile foam MATERIAL Nitrile GRIP PATTERN Foam grip pattern COLOUR Grey
NITRILE COATING
FEATURES Cut resistant according to 388:2016 level B, water and oil repellent palm, steel-fibre free, fibreglass-free
CUT B WITH GOOD FINGERTIP SENSITIVITY
PROPERTIES Good fingertip sensitivity, breathable PRIMARY ENVIRONMENTS OF USE Dry environments, dirty environments
DIRTY ENVIRONMENTS
SIZE RANGE (EU) 6, 7, 8, 9, 10, 11 LENGTH RANGE 210-250 PAIRS PER PACKAGE/CARTON 12/60 DISPLAY Bag with euro slot
DY N
GY O
OND TE CH DIAM NO L
7
®
EN 407:2004 X1XXXX
DY N
EN 388:2016 4X41B
GY O
Cat. II
OND TE CH DIAM NO L
MA EE
®
MA EE
TEGERA OIL GRIP ®
An innovative solution for oily and greasy environments TEGERA® has developed OGT™ – Oil Grip Technology – a special leather treatment that makes the glove oil and water repellent, and thanks to its unique absorption ability maintains excellent grip in wet and oily environments. OGT™ can be used on thin gloves and allows precision work.
INNOVATION
EXCELLENT GRIP in wet and oily environments
The new TEGERA® 6615 gives full 360º protection from water, grease and oil.
FULL 360º PROTECTION from water, grease and oil
EASY ON/OFF elasticated 180º
WORK GLOVES - GENERAL HANDLING / MEDIUM WEIGHT
TEGERA® 6615 Leather glove, unlined, 0,7-0,8 mm full grain cowhide, Cat. II, water and oil repellent, for allround work PALM MATERIAL Full grain cowhide
FEATURES Water and oil repellent
BACK MATERIAL Full grain cowhide
PROPERTIES High level of protection, good fingertip sensitivity, excellent grip in oily environments
LINING Unlined FASTENING Elasticated 180° COLOUR Grey SIZE RANGE (EU) 6, 7, 8, 9, 10, 11, 12
PRIMARY ENVIRONMENTS OF USE Slippery environments, oily and greasy environments
EXCELLENT GRIP IN OILY ENVIRONMENTS
PAIRS PER PACKAGE/CARTON 6/60 DISPLAY Thread
Cat. II
EN 388:2016 3011X
8
UNIFORM GLOVES Top quality leather gloves for normal/narrow hands
RELIABLE COLOUR FASTNESS
Designed for everyday use by uniformed security personnel and officers of the law, the TEGERA® leather safety glove series provides a high level of comfort and protection.
WATER REPELLENT
We are complementing the range with the new TEGERA® 8106 and 8305, which are suitable for users with normal/ narrow hands, and has velcro fastening for a tight fit. All TEGERA® uniform gloves have reliable colour fastness and are compliant with EN ISO 11640:2012.
VELCRO FASTENING for a secure fit
WORK GLOVES - GENERAL HANDLING / MEDIUM WEIGHT
TEGERA® 8106 Leather glove, 0,65-0,8 mm full grain goatskin of top quality, Cat. II, water repellent, for allround work PALM MATERIAL Full grain goatskin of top quality FASTENING Velcro® COLOUR Black SIZE RANGE (EU) 6, 7, 8, 9, 11, 12 LENGTH RANGE 230-255 mm PAIRS PER PACKAGE/CARTON 3/60
FEATURES Water repellent PROPERTIES High level of protection, extremely good fingertip sensitivity, extra flexible, very durable, perfect fit PRIMARY ENVIRONMENTS OF USE Moist environments, dirty environments, harsh environments
DISPLAY Thread
Cat. II
EN 388:2016 EN ISO 11640:2012 2011X Dry 150 cycles 4/5 Wet 50 cycles 3/4
CUT RESISTANT GLOVES / MEDIUM WEIGHT
CUT B
TEGERA® 8305 Cut resistant glove, fully lined, 0,65-0,8 mm full grain goatskin of top quality, cut resistance level B, KEVLAR® fiber, Cat. II, water repellent, for allround work PALM MATERIAL Full grain goatskin of top quality
FEATURES Cut resistant according to 388:2016 level B, water repellent
LINING Fully lined
PROPERTIES Highest level of protection, extremely good fingertip sensitivity, extra flexible, very durable, perfect fit
LINING MATERIAL KEVLAR® fiber FASTENING Velcro® COLOUR Black SIZE RANGE (EU) 6, 7, 8, 9, 10, 11, 12
PRIMARY ENVIRONMENTS OF USE Moist environments, harsh environments
LENGTH RANGE 230-265 mm
CUT LEVEL B
PAIRS PER PACKAGE/CARTON 3/60 DISPLAY Thread
Cat. II
EN 388:2016 EN ISO 11640:2012 2X21B Dry 150 cycles 4/5 Wet 50 cycles 3/4
9
TEGERA BUTYL ®
For special chemical protection TEGERA 16® butyl glove with patterned finish for better grip. Butyl often gives protection where other rubber materials perform less well. Protects against aldehydes (e.g., formaldehyde), glycol ethers (e.g., ethylene glycol), ketones (e.g., methyl ethyl ketone) and acids. TEGERA® 16 is also tested against viruses.
IMPROVED GRIP
with patterned finish
PROTECTION AGAINST ADVANCED CHEMICALS
e.g. ketones and acids
TESTED AGAINST VIRUSES
according to EN ISO 374-5:2016
TEGERA® 16 Chemical protection glove, 0,3 mm butyl, sandy finish, Cat. III, for allround work MATERIAL Butyl
FEATURES Protection against chemicals
THICKNESS 0,3 mm
PROPERTIES Flexible, good fit
GRIP PATTERN Sandy finish
PRIMARY ENVIRONMENTS OF USE Chemical risk environments, environments hazardous to health, corrosive environments, harsh environments
COLOUR Black SIZE RANGE (EU) 7, 8, 9, 10, 11 LENGTH RANGE 350 mm PAIRS PER PACKAGE/CARTON 1/100 DISPLAY Bag
Cat. III
EN 388:2016 0010X
EN ISO 374-5:2016
EN ISO 374-1:2016/Type B VIRUS
10
REPLACES TEGERA® 18
JALAS ZENIT EVO ®
Safety shoes for a new generation Designed for light duty environment use, all six Zenit Evo models combine a lightweight sporty design and sock-like ergonomic fit, seamless construction and enhanced breathability, as well as JALAS®’ signature foot protection. Inspired by the stretch-knit fabrics in modern athletic shoes, the sleek and virtually seamless upper shapes to fit the foot. Thanks to innovative, high-tech materials the Zenit EVO is 10–15% lighter than its predecessor. The latest Boa® L6 Fit System was added for a perfect fit.
When it comes to comfort, an all-new seven-layer cushioning system provides an unparalleled level of foot support and protection. Each layer has a specific function – from JALAS®’ advanced FX3 Supreme insole, with arch and heel support, to the stable yet flexible midsole. While the plastic stabilizing shank prevents twisting, pads of Poron® XRD® foam protect the ball and heel of the foot from extreme impact.
ADDED BREATHABILITY provided through seamless knitted upper and lining
SOCK-LIKE ERGONOMIC COMFORT
Based on high-tech materials and JALAS’ know-how in ergonomic foot protection
SHOCK ABSORPTION AND ERGONOMIC COMFORT
with optimized, new sevenlayer cushioning system ALL-DAY COMFORT
due to lightweight materials SUPERIOR GRIP AND COMFORT
from molecular structured RPU outsole material
SAFETY FOOTWEAR / SAFETY RATING S1
JALAS® 7100 Zenit Evo EN ISO 20345:2011, S1 SRC TOECAP MATERIAL Aluminium FITTING Regular SIZE RANGE (EU) 35-48 PLATFORM Custom SOLE MATERIAL PU midsole, plastic shank, RPU outsole BIND SOLE MATERIAL SBS INSOLE FX3 Supreme INSOLE MATERIAL Textile, soft EVA, rigid EVA, polyester-based conductive thread, neo foam, double shock absorption zones in Poron® XRD®
FEATURES Low weight, oil-resistant outsole, anti-static properties, bellows tongue, padded shaft edge in memory foam, ventilating insole, ergonomically shaped, soft, conforms with IEC 61340-5-1 (ESD) PROPERTIES Excellent grip, perfect fit, extra comfortable, very breathable, excellent shock absorption, extremely light PRIMARY ENVIRONMENTS OF USE Outdoors, indoors, dry environments, clean environments
LACING AVAILABLE FROM APRIL 2019
UPPER MATERIAL Textile LINING MATERIAL Hygienical polyamide COLOUR Black, red, white
SAFETY FOOTWEAR / SAFETY RATING S1 P
JALAS® 7108 Zenit Evo Easyroll EN ISO 20345:2011, S1 P SRC NAIL PROTECTION MATERIAL Plasma-treated composite (PTC) textile TOECAP MATERIAL Aluminium FITTING Regular SIZE RANGE (EU) 35-48 PLATFORM Custom SOLE MATERIAL PU midsole, plastic shank, RPU outsole INSOLE FX3 Supreme INSOLE MATERIAL Textile, soft EVA, rigid EVA, polyester-based conductive thread, neo foam, double shock absorption zones in Poron® XRD®
FEATURES Low weight, oil-resistant outsole, anti-static properties, bellows tongue, padded shaft edge in memory foam, ventilating insole, Boa® closure system, ergonomically shaped, double shock absorption zones, conforms with IEC 61340-5-1 (ESD) PROPERTIES Excellent grip, perfect fit, extra comfortable, very breathable, excellent shock absorption, extremely light PRIMARY ENVIRONMENTS OF USE Outdoors, indoors, environments with risk for outsole penetration, dry environments, clean environments
BOA® L6 FIT SYSTEM AVAILABLE FROM APRIL 2019
UPPER MATERIAL Textile LINING MATERIAL Hygienical polyamide COLOUR Black, red, white
JALAS® 7118 Zenit Evo Easyroll EN ISO 20345:2011, S1 P SRC NAIL PROTECTION MATERIAL Plasma-treated composite (PTC) textile TOECAP MATERIAL Aluminium FITTING Regular SIZE RANGE (EU) 35-48 PLATFORM Custom SOLE MATERIAL PU midsole, plastic shank, RPU outsole INSOLE FX3 Supreme INSOLE MATERIAL Textile, soft EVA, rigid EVA, polyester-based conductive thread, neo foam, double shock absorption zones in Poron® XRD®
FEATURES Low weight, oil-resistant outsole, anti-static properties, bellows tongue, padded shaft edge in memory foam, ventilating insole, Boa® closure system, stabilizator, ergonomically shaped, conforms with IEC 61340-5-1 (ESD) PROPERTIES Excellent grip, perfect fit, extra comfortable, very breathable, excellent shock absorption, extremely light PRIMARY ENVIRONMENTS OF USE Outdoors, indoors, environments with risk for outsole penetration, dry environments, clean environments
UPPER MATERIAL Textile LINING MATERIAL Hygienical polyamide COLOUR Black, grey, white
12
BOA® L6 FIT SYSTEM AVAILABLE FROM APRIL 2019
SAFETY FOOTWEAR / SAFETY RATING S1 P
JALAS® 7128 Zenit Evo EN ISO 20345:2011, S1 P SRC NAIL PROTECTION MATERIAL Plasma-treated composite (PTC) textile TOECAP MATERIAL Aluminium FITTING Regular SIZE RANGE (EU) 35-48 PLATFORM Custom SOLE MATERIAL PU midsole, plastic shank, RPU outsole INSOLE FX3 Supreme INSOLE MATERIAL Textile, soft EVA, rigid EVA, polyester-based conductive thread, neo foam, double shock absorption zones in Poron® XRD®
FEATURES Low weight, oil-resistant outsole, anti-static properties, bellows tongue, padded shaft edge in memory foam, ventilating insole, ergonomically shaped, conforms with IEC 613405-1 (ESD) PROPERTIES Excellent grip, perfect fit, extra comfortable, very breathable, excellent shock absorption, extremely light PRIMARY ENVIRONMENTS OF USE Outdoors, indoors, environments with risk for outsole penetration, dry environments, clean environments
LACING AVAILABLE FROM APRIL 2019
UPPER MATERIAL Textile LINING MATERIAL Hygienical polyamide COLOUR Black, grey, white
SAFETY FOOTWEAR / SAFETY RATING S3
JALAS® 7138 Zenit Evo Easyroll EN ISO 20345:2011, S3 SRC NAIL PROTECTION MATERIAL Plasma-treated composite (PTC) textile TOECAP MATERIAL Aluminium FITTING Regular SIZE RANGE (EU) 35-48 PLATFORM Custom SOLE MATERIAL PU midsole, plastic shank, RPU outsole INSOLE FX3 Supreme INSOLE MATERIAL Textile, soft EVA, rigid EVA, polyester-based conductive thread, neo foam, double shock absorption zones in Poron® XRD® UPPER MATERIAL Textile
COLOUR Black, red, white FEATURES Low weight, oil-resistant outsole, anti-static properties, bellows tongue, padded shaft edge in memory foam, ventilating insole, Boa® closure system, water repellent, ergonomically shaped, conforms with IEC 613405-1 (ESD) PROPERTIES Excellent grip, perfect fit, extra comfortable, very breathable, excellent shock absorption, extremely light PRIMARY ENVIRONMENTS OF USE Outdoors, indoors, environments with risk for outsole penetration, dry environments, clean environments
BOA® L6 FIT SYSTEM AVAILABLE FROM APRIL 2019
LINING MATERIAL Hygienical polyamide
JALAS® 7148 Zenit Evo EN ISO 20345:2011, S3 SRC NAIL PROTECTION MATERIAL Plasma-treated composite (PTC) textile TOECAP MATERIAL Aluminium FITTING Regular SIZE RANGE (EU) 35-48 PLATFORM Custom SOLE MATERIAL PU midsole, plastic shank, RPU outsole INSOLE FX3 Supreme INSOLE MATERIAL Textile, soft EVA, rigid EVA, polyester-based conductive thread, neo foam, double shock absorption zones in Poron® XRD®
FEATURES Low weight, oil-resistant outsole, anti-static properties, bellows tongue, padded shaft edge in memory foam, ventilating insole, water repellent, ergonomically shaped, conforms with IEC 61340-5-1 (ESD) PROPERTIES Excellent grip, perfect fit, extra comfortable, very breathable, excellent shock absorption, extremely light PRIMARY ENVIRONMENTS OF USE Outdoors, indoors, environments with risk for outsole penetration, dry environments, clean environments
UPPER MATERIAL Textile LINING MATERIAL Hygienical polyamide COLOUR Black, red, white
13
LACING AVAILABLE FROM APRIL 2019
JALAS SPOC ®
Sculpted for you. Certified for work. enhanced breathability. Choose between laces or the L6 Boa® Fit System. All the shoes in JALAS® SPOC (sporty occupational) collection are certified according to EN ISO 20347:2012, ensuring durability and safety.
Inspired by sleek, modern sneakers, the JALAS® SPOC combines the safety and ergonomic comfort of an occupational shoe with a stylish new design. The leather models are splash resistant and highly durable, while the bold red or black textile models offer flexibility and
FEET REMAIN COOL AND CLEAN
through hygienic polyamide
ALL-DAY COMFORT
due to lightweight materials
EXCELLENT ABRASION AND SLIP RESISTANCE
provided through nitrile rubber outsole
OPTIMAL IMPACT DISTRIBUTION
from EVA midsole
ULTIMATE SHOCK ABSORPTION
with optimized PORON® XRD® insole
OCCUPATIONAL FOOTWEAR / SAFETY RATING O1
JALAS® 5302 SpOc EN ISO 20347:2012, O1 A E FO SRC FITTING Regular SIZE RANGE (EU) 35-48 PLATFORM Active SOLE MATERIAL EVA, rubber outsole INSOLE FX2 PRO SpOc insole INSOLE MATERIAL Textile, soft EVA, polyesterbased conductive thread, double shock absorption zones in Poron® XRD® UPPER MATERIAL Textile LINING MATERIAL Hygienical polyamide
FEATURES Breathable mesh, low weight, oilresistant outsole, anti-static properties, ESD, double shock absorption zones, conforms with IEC 61340-5-1 (ESD), antibacterial fibre counteracts odours PROPERTIES Excellent grip, perfect fit, extra comfortable, breathable, excellent shock absorption, light PRIMARY ENVIRONMENTS OF USE Outdoors, indoors, office environments, slippery environments
COLOUR Black, white
14
UPPER IN TEXTILE/ LACING AVAILABLE FROM APRIL 2019
OCCUPATIONAL FOOTWEAR / SAFETY RATING O1
JALAS® 5322 SpOc EN ISO 20347:2012, O1 A E FO SRC FITTING Regular SIZE RANGE (EU) 35-48 PLATFORM Active SOLE MATERIAL EVA, rubber outsole INSOLE FX2 PRO SpOc insole INSOLE MATERIAL Textile, soft EVA, polyesterbased conductive thread, double shock absorption zones in Poron® XRD® UPPER MATERIAL Textile
FEATURES Breathable mesh, low weight, oil-resistant outsole, anti-static properties, ventilating insole, ESD, double shock absorption zones, conforms with IEC 61340-5-1 (ESD) PROPERTIES Excellent grip, perfect fit, extra comfortable, breathable, excellent shock absorption, extremely light PRIMARY ENVIRONMENTS OF USE Outdoors, indoors, office environments, slippery environments
LINING MATERIAL Hygienical polyamide COLOUR Black, red, white
UPPER IN TEXTILE LACING AVAILABLE FROM APRIL 2019
OCCUPATIONAL FOOTWEAR / SAFETY RATING O2
JALAS® 5342 SpOc EN ISO 20347:2012, O2 A E FO SRC FITTING Regular SIZE RANGE (EU) 35-48 PLATFORM Active SOLE MATERIAL EVA, rubber outsole INSOLE FX2 PRO SpOc insole INSOLE MATERIAL Textile, soft EVA, polyesterbased conductive thread, double shock absorption zones in Poron® XRD® UPPER MATERIAL Full-grain leather
FEATURES Low weight, oil-resistant outsole, anti-static properties, ESD, water repellent leather, double shock absorption zones, conforms with IEC 61340-5-1 (ESD) PROPERTIES Excellent grip, perfect fit, extra comfortable, excellent shock absorption, light PRIMARY ENVIRONMENTS OF USE Outdoors, indoors, office environments, all-year use, slippery environments, dry environments, clean environments
LINING MATERIAL Hygienical polyamide COLOUR Black
UPPER IN FULL-GRAIN LEATHER LACING AVAILABLE FROM APRIL 2019
JALAS® 5352 SpOc easyroll EN ISO 20347:2012, O2 A E FO SRC FITTING Regular SIZE RANGE (EU) 35-48 PLATFORM Active SOLE MATERIAL EVA, rubber outsole INSOLE FX2 PRO SpOc insole INSOLE MATERIAL Textile, soft EVA, polyesterbased conductive thread, double shock absorption zones in Poron® XRD® UPPER MATERIAL Full-grain leather LINING MATERIAL Hygienical polyamide
FEATURES Low weight, oil-resistant outsole, anti-static properties, Boa® closure system, ESD, water repellent leather, double shock absorption zones, conforms with IEC 61340-5-1 (ESD) PROPERTIES High level of protection, excellent grip, perfect fit, extra comfortable, excellent shock absorption, light PRIMARY ENVIRONMENTS OF USE Outdoors, indoors, office environments, all-year use, slippery environments, dry environments, clean environments
COLOUR Black
15
UPPER IN FULL-GRAIN LEATHER BOA® FIT SYSTEM AVAILABLE FROM APRIL 2019
OTHER FOOTWEAR
JALAS® 8020 SANDAL Slip resistant shower sandal made of lightweight EVA. For indoor use. SIZE RANGE (EU) 35-48 Double sizing SOLE MATERIAL EVA
SLIP RESISTANT
UPPER MATERIAL EVA
REPLACES 4020B
COLOUR Black, red, white FEATURES Low weight, anatomically designed PROPERTIES Light
AVAILABLE FROM APRIL 2019
ANTI-SLIP PROTECTION
JALAS® 8027 Heel grip Anti-slip protection, TPU, black, five studs MATERIAL TPU COLOUR Black SIZE RANGE (EU) S, M, L, XL FEATURES Easy to put on and take off, suitable for all shoes and boots PROPERTIES Perfect fit
16
ACCESSORIES
JALAS® 8014-60 Jalas Shoe Horn Shoe horn, TPE, black MATERIAL TPE COLOUR Black SIZE RANGE (EU) 60 LENGTH 60 cm
JALAS® 8015-1 Shoe brush Shoe brush made of wood and dense brush of horsehair.
17
JALAS FSS ®
The FootStop Service insoles and foot scanner is available with a new design Developed by medical specialists, JALAS® FSS uses pressure-mapping software to measure the foot’s arch type and pressure points. The scanner helps to pinpoint problem areas that may be causing strain injuries, heel spurs, nerve issues or other discomfort. With FSS, the correct insole is easily selected. It takes just 10 seconds to make an analysis, and there is no need to remove socks. The scanner instantly records foot arch and pressure measurements. Then the display shows the location of pressure points how and whether arches are low, medium or high.
JALAS® Neutralizer are made to prevent foot issues from occurring. Arch support that provide rigidity and stability and helps the foot to have an neutral position through the step. JALAS® Neutralizer insoles are approved and certified for use with all JALAS® safety shoes. The double shock absorption zones feature extra cushioning made of Poron® XRD®, a high-tech material that absorbs up to 90% of impact energy. Used by professional athletes, this material depresses and molds to the shape of the foot while providing maximum impact protection. Whether the foot arch is low, medium or high, JALAS® have insoles to provide the right support. 8709H High Arch Support 8710M Medium Arch Support 8711L Low Arch Support
18
ALPHANUMERIC INDEX GLOVES
Page
SHOES
Page
ACCESSORIES
Page
TEGER A ® 8810 INFINITY.......................... 4
JALAS ® 7 100 ZENIT EVO.......................... 12
JALAS ® 8027 HEEL GRIP.. ........................ 16
TEGER A 8814 INFINITY.......................... 5
JALAS 7 108 ZENIT EVO EASYROLL . . . 12
JALAS ® 8014-60 JALAS SHOE HORN.. . 17
TEGER A 905 .............................................. 7
JALAS 7 118 ZENIT EVO EASYROLL ... 12
JALAS ® 8015-1 SHOE BRUSH.................. 17
TEGER A ® 906 .............................................. 7
JALAS ® 7 128 ZENIT EVO.......................... 13
TEGER A 929 .............................................. 7
JALAS ® 7 138 ZENIT EVO EASYROLL . . . 13
TEGER A 6615 .. ........................................... 8
JALAS ® 7 148 ZENIT EVO.......................... 13
TEGER A 8106 .. ........................................... 9
JALAS ® 5302 SPOC. . .................................. 14
TEGER A ® 8305 .. .......................................... 9
JALAS ® 5322 SPOC . . .................................. 15
TEGER A 16 .................................................. 10
JALAS ® 5342 SPOC. . .................................. 15
® ®
® ® ®
®
® ®
JALAS ® 5352 SPOC EASYROLL............ 15 JALAS ® 8020 SANDAL.............................. 16
Ejendals ab
Limavägen 28 SE-793 32 Leksand Sweden Phone +46 (0) 247 360 00
SP-1065
info@ejendals.com order@ejendals.com www.ejendals.com