Paul Yaffe's Bagger Nation 2015 Catalog by Rico G

Paul Yaffes THE GOODS 2015

Bagger Nation

Wow!! I can’t believe it’s been over 20 years since I opened my shop in a 900 sq. ft. building in Phoenix Arizona. It’s been quite a ride and I have you my loyal customers to thank. Without your support, I wouldn’t have been able to live out my dreams.

I thank you all for your support and patronage. I’m looking forward to another 20 years!! In the mean time, let’s ride.

Paul Yaffe

Paul Yaffe / Sacramento, CA 2013 - Photo: Michael Lichter

THE GOODS 2015 FENDERS & LICENSE PLATE ACCESSORIES - SECTION 01

PAGES 6-33

SADDLEBAGS & ACCESSORIES - SECTION 02

PAGES 34-47

BODY & ACCESSORIES - SECTION 03

PAGES 48-65

SRT (STEAM ROLLER TOURING) - SECTION 04

PAGES 66-69

TANKS, DASH AND SEATS - SECTION 05

PAGES 70-79

TRIKE ACCESSORIES - SECTION 06

PAGES 80-81

RAKE YOUR BAGGER - SECTION 07

PAGES 82-93

LIGHTS - SECTION 08

PAGES 94-105

SUSPENSION - SECTION 09

PAGES 106-107

MONKEY BARS, GUARD & APES - SECTION 10

PAGES 108-125

WHEELS & YAXLES - SECTION 11

PAGES 126-135

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES - SECTION 12

PAGES 136-181

PIPES & PERFORMANCE - SECTION 13

PAGES 182-191

MOTORCYCLE AUDIO - SECTION 14

PAGES 192-215

APPAREL - SECTION 15

PAGES 216-240

FENDERS & LICENSE PLATE ACCESSORIES 21”, 23” and 26” Classic Stretched Front Fenders - Page 8-9 21”, 23” and 26” Thicky Steel Front Fenders - Page 10-11 21”, 23” and 26” Talon Steel Front Fenders - Page 12-13 21”, 23” and 26” DEI Steel Front Fenders - Page 14-15

SECTION

Fender Spacers - Page 16-17 Super Stretch Rear Fenders 2009-2015 - Page 18-21 Chupa Stretched Rear Fenders 2009-2015 - Page 22-25 Chupa Stretched Rear Fenders 2008-Earlier - Page 26-27 Buzz Saw Softail Bagger Kit - Page 28-29 Replacement Saddlebag Lids and Hardware - Page 29 Stealth III Universal License Frames - Page 30-31 Stealth II Frenched License Kits - Page 32-33

PAGE

602.840.4205 | BAGGERNATION.COM

CLASSIC STRETCHED 21”, 23” AND 26” FENDER Adding a big front wheel to your Bagger is all the rage! Paul loves the big wheel Baggers so much that he’s created a line of products just for this conversion! The Bagger Nation® Classic Stretched Fender is styled in traditional Bagger fashion with a nice 4” stretch on the tail for that slammed hot-rod look. The 90* angle between the top and

Each fender is the highest quality, pressure-formed composite fender that’s 3-D molded and hand finished so there’s no need for additional mounting blocks, we’ve handled that! Part # FFC-21 / Touring models 1986 to present / Price: $539.95 Part # FFC-23 / Touring models 1986 to present / Price: $569.95 Part # FFC-26 / Touring models 1986 to present / Price: $599.95

THIS PRODUCT IS PAINT READY

NO ADDITIONAL SPACERS REQUIRED

FFC-21

FFC-23”

Made in the USA

PAINTER APPROVED YOUR PAINTER WILL LOVE YOU

FFC-26”

Shown: FFC-26”

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

FENDERS & LICENSE PLATE ACCESSORIES

Perfect 90° angle fender! Just like a hot rod fender should be!

rear fender edges creates perfect symmetry, and allows the eye to flow seamlessly across your Bagger. The Classic Stretched Fender will set your bike apart from the pack.

SOLID STEEL THICKY 21”, 23” AND 26” FENDER AND SPACERS

New

Check out our NEW Thicky steel fenders! These fenders have been a best seller for years, and this classic west-coast styled fender is the perfect complement to any Bagger project that’s stepping up the front wheel size. Wait… NEW? You’ve been selling Thicky fenders for years! Well, this year Paul created all new tooling for our steel front fenders that allows them to be deep-drawn from one indestructible piece of 14 gauge steel! Each stamped fender is then precision laser-cut for perfect symmetry. We’ve even drilled the mounting holes so you won’t have to touch a tool when you choose our fenders! No spinning, no welding, no seams or grooves that need to be body worked! Each fender is meticulously E-Coated so you can rest assured your fender will arrive corrosion free and remain corrosion free. These fenders are perfect… Seriously, they are perfect! You can pull them right out of the box, scuff them, paint them, and mount them! No mock up, no drilling, no shaping of any kind is required. Your painter will love us… and you will too! In addition, you’ll you also get a free set of polished fender spacers ($70 value) included with each fender! That’s right…FREE! What are you waiting for? Part # THICKY-21/ Thicky Front Fender 21” and Spacers / Price $299.99 Part # THICKY-23/ Thicky Front Fender 23” and Spacers / Price $319.99 Part # THICKY-26/ Thicky Front Fender 26” and Spacers / Price $329.99 Upgrade your polished fender spacers to gloss black or chrome Part # BFSU / Black Fender Spacer Upgrade / Price $15.00 Part # CFSU / Chrome Fender Spacer Upgrade / Price $20.00

THICKY-21

Polished fender spacers included! Shown: Thicky 23” Fender

Charles’ Road Glide / Phoenix, AZ 2013 - Photo: KriegMark

602.840.4205 | BAGGERNATION.COM

PAGE

SOLID STEEL

Made in the USA

YOUR PAINTER WILL LOVE YOU

THICKY-23

THICKY-26

Polished fender spacers included!

Check out our custom Domino Fender Spacers sold separately on page 17 PAGE

602.840.4205 | BAGGERNATION.COM

FENDERS & LICENSE PLATE ACCESSORIES

2014 Compatible with our 2014 Adapter Spacers

THIS PRODUCT IS PAINT READY

PAINTER APPROVED

SOLID STEEL TALON 21”, 23” AND 26” FENDER AND SPACERS Add instant attitude to your bike with the latest addition to our front fender line. The Steel Talon Fender is an aggressive and radically styled fender, featuring a swooping claw-like design that draws your eyes right to the points! The edgy Steel Talon Fender will set your bike apart from the crowd! This year Paul created all new tooling for our steel front fenders that allows them to be deep-drawn from one indestructible piece of 14 gauge steel! Each stamped fender is then precision laser-cut for perfect symmetry. We’ve even drilled the mounting holes so you won’t have to touch a tool when you choose our fenders! No spinning, no welding, no seams or grooves that need to be body worked! Each fender is meticulously E-Coated so you can rest assured your fender will arrive corrosion free and remain corrosion free. These fenders are perfect… Seriously, they are perfect! You can pull them right out of the box, scuff them, paint them, and mount them! No mock up, no drilling, no shaping of any kind is required. Your painter will love us… and you will too! In addition, you’ll you also get a free set of polished fender spacers ($70 value) included with each fender! That’s right…FREE! What are you waiting for? Part # TALON-21/ Talon Front Fender 21” and Spacers / Price $299.99 Part # TALON-23/ Talon Front Fender 23” and Spacers / Price $319.99 Part # TALON-26/ Talon Front Fender 26” and Spacers / Price $329.99 THIS PRODUCT IS PAINT READY

PAINTER APPROVED

SOLID STEEL

Made in the USA

YOUR PAINTER WILL LOVE YOU

New TALON-21

Shown: Talon 26” Fender

TALON-23

TALON-26

Made in the USA

2014 Compatible with our 2014 Adapter Spacers

602.840.4205 | BAGGERNATION.COM

Polished fender spacers included!

Check out our custom Domino Fender Spacers sold separately on page 17 PAGE

PAGE

602.840.4205 | BAGGERNATION.COM

FENDERS & LICENSE PLATE ACCESSORIES

Upgrade your polised fender spacers to gloss black or chrome Part # BFSU / Black Fender Spacer Upgrade / Price $15.00 Part # CFSU / Chrome Fender Spacer Upgrade / Price $20.00

SOLID STEEL DEI 21”, 23” AND 26” FENDER AND SPACERS The classic sport-styled DEI Fender was originally designed for late racing legend Dale Earnhardt. Now Paul has completely restyled this classic fender by adding length to the front and

New

rear, and by beefing-up the sidewalls. The NEW DEI fender remains iconic and compliments your 21, 23, and 26” wheel conversions. Wait… NEW? You’ve been selling DEI fenders for years! Well, this year Paul created all new tooling for our steel front fenders that allows them to be deep-drawn from one indestructible piece of 14 gauge steel! Each stamped fender is then precision laser-cut for perfect symmetry. We’ve even drilled the mounting holes so you won’t have to touch a tool when you choose our fenders! No spinning, no welding, no seams or grooves that need to be body worked! Each fender is meticulously E-Coated so you can rest assured your fender will arrive corrosion free and remain corrosion free. These fenders are perfect… Seriously, they are perfect! You can pull them right out of the box, scuff them, paint them, and mount them! No mock up, no drilling, no shaping of any kind is required. Your painter will love us… and you will too! In addition, you’ll you also get a free set of polished fender spacers ($70 value) included with each fender! That’s right…FREE! What are you waiting for? Part # DEI-21/ DEI Front Fender 21” and Spacers / Price $299.99 Part # DEI-23/ DEI Front Fender 23” and Spacers / Price $319.99 Part # DEI-26/ DEI Front Fender 26” and Spacers / Price $329.99

THIS PRODUCT IS PAINT READY

Made in the USA

Upgrade your polished fender spacers to gloss black or chrome Part # BFSU / Black Fender Spacer Upgrade / Price $15.00 Part # CFSU / Chrome Fender Spacer Upgrade / Price $20.00

SOLID STEEL

YOUR PAINTER WILL LOVE YOU

DEI-26

DEI-23

2014 Compatible with our 2014 Adapter Spacers

Polished fender spacers included! Shown: DEI 23” Fender

602.840.4205 | BAGGERNATION.COM

PAGE

Polished fender spacers included!

Check out our custom Domino Fender Spacers sold separately on page 17 PAGE

602.840.4205 | BAGGERNATION.COM

FENDERS & LICENSE PLATE ACCESSORIES

DEI-10

PAINTER APPROVED

2014 FENDER ADAPTERS As many of you may know, the 2014 Touring models feature a restyled front fork with larger

New

diameter fork tubes and restyled fork legs. Part of the restyle was changing the width of the fender mounts just enough so that no existing aftermarket fender would fit a 2014 Touring bike… Sneaky right? But hey, no worries! Paul has created a really clean, innovative set of adapters that allows all of our 2013 steel fenders to bolt right on to your 2014 model! Our fender adapters are sold in pairs, they are CNC machined from 6061-T6 aluminum, and then beautifully chrome plated or flawlessly powder coated in rich, gloss black. All hardware is included, and it’s an easy bolt on application. Patent Pending

2014-2015 COMPATIBLE

Works perfectly with our 21”, 23”, 26” Thicky, Talon, and DEI fenders

FENDERS & LICENSE PLATE ACCESSORIES

BAGGER NATION “CAS” FENDER SPACERS

Part # FA14-21-C / Chrome 2014 Fender Adapter Kit, 21” Fender / Price: $89.95 Part # FA14-21-B / Black 2014 Fender Adapter Kit, 21” Fender / Price: $89.95 Part # FA14-23/26-C / Chrome 2014 Fender Adapter Kit, 23” & 26” Fender / Price: $89.95 Part # FA14-23/26-B / Black 2014 Fender Adapter Kit, 23” & 26” Fender / Price: $89.95

“CAS” you ask? Clean And Simple… That’s what these spacers represent. Just a nice little part to get the job done. We offer them in 2 widths and 2 finishes to fit most aftermarket fenders. They work on 2013 and earlier Baggers. Your stock fender mounts are 8” apart on the inside. So just measure your fender mounts on the outside, subtract that number from 8 and divide by 2. That’s the spacer size you’ll need! I hope we didn’t lose you there! Spacers are sold in pairs. Each set in CNC machined from 6061-T6 aluminum and then perfectly polished then beautifully chrome plated or gloss black powder coated. Fits 1986 -2013 HD touring models. Part # CAS-.880B / .880” Wide Spacers Black / Price: $39.95 Part # CAS-1.00B / 1.0” Wide Spacers Black / Price: $39.95 Part # CAS-.880C / .880” Wide Spacers Chrome / Price $39.95 Part # CAS-1.00C / 1.0” Wide Spacers Chrome / Price $39.95

CUSTOM DOMINO FENDER SPACERS These trick little Bagger Fender Spacers make the install of our new fenders simple and easy! They feature Domino styling on one side and smooth styling on the other, so you can choose your styling preference. Available in chrome, satin, or black powder coat with accent cuts. Please note front wheel size when ordering. Part # - BFS-C / Front Fender Spacers 21” Chrome / Price: $89.95 Part # - BFS-C 880 / Front Fender Spacers 23” & 26” Chrome / Price: $89.95 Part # - BFS-B / Front Fender Spacers 21” Black Powder Coat / Price: $86.00 Part # - BFS-B 880 / Front Fender Spacers 23” & 26” Black Powder Coat / Price: $86.00

Measuring Example: 8” – 6” = 2” divide 2” by 2 and you get 1”… That’s the size fender spacer you’ll need….

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

New

BAGGER NATION® SUPER STRETCH FENDERS Check out our NEW look for 2009 and later custom Baggers! We have taken our popular Chupa 8” stretched fenders, added even more length, then we stretched the fender rearward an additional 9” to give your big wheel bagger a super stretched profile! The NEW Bagger Nation® Super Stretch Fender is specifically designed to fit seamlessly with our NEW Bagger Nation® Super Stretch Saddlebags on all 2009 and later HD touring models. Our fenders are 3-D molded from the highest quality materials to assure a perfect fit and finish every time. Our fenders are available with your choice of two tail shapes, Pleated or Rounded Tail. Each fender includes our frenched Stealth II license frame with hidden LED lights. They are available with smooth fillers so you can create your own custom taillight look by choosing from our variety of Super Bright taillight options. We also offer our NEW Super Stretched Fenders with our popular Wedgy Lights or our NEW

No cutting, shaping or drilling required…Just bolt the fender on and wire it up, it’s that easy! Our fenders are a direct bolt-on replacement (not a skin) and utilize your stock mounting hardware. They will not interfere with accessory sissy bar or tour-pack docking hardware. Both tail shapes are available in either dual exhaust outlet OR no exhaust outlet styles to match our corresponding Super Stretch saddlebags available on page 37

THIS PRODUCT IS PAINT READY

PAINTER APPROVED

Shown:

2014-2015 COMPATIBLE

No Outlet Super Stretch Pleated Fender, Bagger Dagger Lights, No Outlet Super

YOUR PAINTER WILL LOVE YOU

Pleated Tip / Smooth N/O PSSF-NO

Made in the USA

Stretch SaddleBags

Rounded Tip / Smooth D/O SSF-DO

Now Available With Frenched Lights! Turn The Page!

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

FENDERS & LICENSE PLATE ACCESSORIES

Bagger Dagger lights frenched in right from the factory!

BAGGER NATION速 SUPER STRETCH FENDERS WITH FRENCHED LIGHT BOXES

PLEATED FENDERS

Pleated Tip / Bagger Dagger Lights / N/O

Pleated Tip / Wedgy Lights / N/O

Pleated Super Stretch Fenders Part # PSSF-DO / Pleated Super Stretch Fender w Smooth Fillers and Stealth II (2 Outlet) / Price: $1199.95 Part # PSSF-NO / Pleated Super Stretch Fender w Smooth Fillers and Stealth II (No Outlet) / Price: $1199.95 Part # PSSF-DO-BD / Pleated Super Stretch Fender w Bagger Daggers and Stealth II (2 Outlet) / Price: $1674.95 Part # PSSF-NO-BD / Pleated Super Stretch Fender w Bagger Daggers and Stealth II (No Outlet) / Price: $1674.95 Part # PSSF-DO-WL / Pleated Super Stretch Fender w Wedgy Lights and Stealth II (2 Outlet) / Price: $1498.95 Part # PSSF-NO-WL / Pleated Super Stretch Fender w Wedgy Lights and Stealth II (No Outlet) / Price: $1498.95

FLUSH I

Pleated Tip / Bagger Dagger Lights / D/O

Pleated Tip / Wedgy Lights / D/O

Pleated Tip / Smooth / N/O & D/O

Round Tailed Super Stretch Fenders Part # SSF-DO / Pleated Super Stretch Fender w Smooth Fillers and Stealth II (2 Outlet) / Price: $1199.95 Part # SSF-NO / Pleated Super Stretch Fender w Smooth Fillers and Stealth II (No Outlet) / Price: $1199.95 Part # SSF-DO-BD / Pleated Super Stretch Fender w Bagger Daggers and Stealth II (2 Outlet) / Price: $1674.95 Part # SSF-NO-BD / Pleated Super Stretch Fender w Bagger Daggers and Stealth II (No Outlet) / Price: $1674.95 Part # SSF-DO-WL / Pleated Super Stretch Fender w Wedgy Lights and Stealth II (2 Outlet) / Price: $1498.95 Part # SSF-NO-WL / Pleated Super Stretch Fender w Bagger Daggers and Stealth II (No Outlet) / Price: $1498.95

** For 2014/2015 model years please add a (-14) suffix to end of part # when ordering. If you prefer a black license frame and light bezels please add a (-B) suffix to end of part # when ordering. Example: #SSF-NO-BD-14-B would be telling us that you prefer black plate frame and light bezels** ** We offer all of our Super Stretch fenders custom fitted with HD CVO light holes by special order** Please call your Bagger Nation速 sales representative for assistance at (602) 840-4205

PAGE

Round Tip / Smooth / N/O

602.840.4205 | BAGGERNATION.COM

FENDERS & LICENSE PLATE ACCESSORIES

ALL STYLES Available IN ROUND TAILED

CHUPA STRETCHED REAR FENDERS 2009 – 2013 Bagger Nation® offers the ultimate 8” stretched rear fenders for your 2009 and later custom Bagger! Check out the fantastic flowing style of our Bagger Nation Chupa stretched rear fenders. This year we have expanded our ever popular Chupa line to include a new version with our NEW Bagger Dagger taillights frenched in right at our factory! We’ve done all the work for you! So now you can choose from 3 custom fender styles- Smooth fillers, which allows you to choose any of our custom taillight offerings. Frenched Wedgy lights, or the NEW Chupa with frenched Bagger Dagger lights! As always each Chupa rear fender includes one of our Stealth II frenched license frames with hidden LED lights. Our exclusive 3-D mold process assures you the highest quality composite fender available. Each fender kit is a direct bolt-on replacement for your stock fender (not a skin). No modifications are needed… Just bolt it on and wire up the lights. The Chupa fender is available for all touring models 2009 -2015. We offer both dual outlet and no outlet versions with fillers to match your stock bags, our Big Bag stretched saddlebags and even HD CVO bags. Our Chupa fenders do not interfere with your detachable backrest or tour pack. You can even special order our Chupa Fenders with CVO light holes that accept HD CVO lights! (2013 and earlier light style). We also offer a direct bolt-on CVO replacement Chupa that matches Harley Davidson CVO 2009-2103.

CVO light holes available by special order. Part # CFS-P / Chupa Rear Fender w Stealth II Plate Frame / Price: $899.95 Part # CFF-KIT / Chupa Rear Fender w Stealth II and Wedgy Lights / Price: $1374.95 Part #CFF-BD / Chupa Rear Fender w Stealth II and Bagger Dagger Lights / Price: $1374.95 Part # CFS-P-14 / Chupa Rear Fender for 2014/15 models with stock saddlebags / Price: $899.95

THIS PRODUCT IS PAINT READY

PAINTER APPROVED YOUR PAINTER WILL LOVE YOU

special order with cvo lights

Shown: D/O Chupa with Bagger Dagger Lights D/O Big Bags, Monsta 45 Exhaust Double Trouble Audio Lids

Made in the USA

602.840.4205 | BAGGERNATION.COM

Chupa / Smooth / D/O PAGE

PAGE

602.840.4205 | BAGGERNATION.COM

FENDERS & LICENSE PLATE ACCESSORIES

Please note: **2014/2015 or black suffix notes on page 24 for correct part number information.** Single right side outlet or

CFF-BD-NO

CFF-KIT-NO

CFF-BD

For a no outlet Chupa rear fender please add a [ –NO] suffix to the end of part # when ordering. If you prefer a black license frame or light bezels please add a [–B] suffix to end of part # when ordering. Example: #CFF-BD-NO-B would be telling us that you prefer a No Exhaust outlet fender with black frame and light bezels. We offer all of our Chupa rear fenders with 2009-2013 style HD CVO light holes by special order. Please call you Bagger Nation sales representative for assistance at (602) 840-4205

FLUSH I

CFF-KIT

CFS

CFS-P

CFS-P-14

DON’T SEE WHAT YOU WANT? Want a fender combination that you don’t see? No problem! Special orders don’t upset us! Perhaps you want a set of Middle Finger or Delux lights from our Lights section frenched into your Chupa Fender? Maybe you want two sets of Wedgy Lights in your fillers? It’s no problem! Let us create that special fender just for you. Please contact your Bagger Nation sales representative for an individual quote!

PAGE

602.840.4205 | BAGGERNATION.COM

FENDERS & LICENSE PLATE ACCESSORIES

CHUPA STRETCHED REAR FENDERS 2009 – 2015 WITH FRENCHED LIGHT BOXES

CHUPA REAR FENDERS 2008 - EARLIER Our ever popular 8” Chupa stretched rear fender line is also available for 2008 and earlier models. These fenders are offered with smooth fillers (no taillights) so you can choose any of our custom taillight options. We offer our frenchy kits on page 33. These trick CNC machined boxes allow you to french our Middle Finger, Snake Eye or Delux lights into the fillers (or any other surface) in whatever fashion you can dream up! We also offer this fender with a set of our Wedgy Taillights frenched in right at our factory so you we have done all the work for you! All you have to do is bolt on the fender and wire the lights up. Just like our 2009 and later fenders, our 2008 and earlier Chupas are a direct bolt on replacement fender (not a skin) and they will not interfere with your HD back rest detachable docking system** Please note: **Black suffix notes below for correct part number information.** Single right side outlet or CVO light holes are available by special order. ** These fenders will require a hole drilled in the fillers to work with HD’s detachable tour pack rack. Part # CFF08-KIT / Frenched Stealth II and Frenched Wedgy Lights / $1374.95 Part # CFS08-P / Frenched Stealth II with smooth fillers / $899.95

New

For a no outlet Chupa rear fender please add a[ –NO] suffix to the end of part # when ordering. If you prefer a black license frame or light bezels please add a [–B] suffix to end of part # when ordering. Example: #CFF08-KIT-NO-B would be telling us that you prefer a No Exhaust outlet fender with black frame and light bezels. We offer all of our Chupa rear fenders with 2009-2013 style HD CVO light holes by special order. Please call your Bagger Nation sales representative for assistance at (602) 840-4205

FENDERS & LICENSE PLATE ACCESSORIES

LOWER PRICE!

THIS PRODUCT IS PAINT READY

PAINTER APPROVED YOUR PAINTER WILL LOVE YOU

Shown: D/O Chupa with Wedgy Lights D/O Big Bags Yafterburner Exhaust Tips

Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

BUZZ SAW SOFTAIL BAGGER KIT So, you want to turn your Softail into a head-turning, traffic-stopping Bagger? Well, Bagger Nation® has the kit for you... Introducing our NEW Buzz Saw Softail Bagger Kit! Finally, a complete kit that will inspire you

New

to slap hard bags on your Softail and transform your ride. Softails certainly have several advantages over touring models, like lower seat height, a narrower frame in the saddle area, lighter weight and of course, an sleeker looking chassis. With the introduction of the Twin Cam B counterbalanced drivetrain, the Softail also becomes a smooth running, distance capable machine as well. We developed our Buzz Saw Kit to enhance these advantages and help you create a killer Patent Pending

Softail Bagger! Each kit includes: a set of our Big Bag Stretched Saddlebags, a complete, bolt-on saddlebag support rail system with quick-detach bag retainers, an 8” Stretched Chupa Rear Fender with a Stealth II license frame, and a pair of our exclusive Swoop Stretch Side Covers for

All hardware is included along with complete, step-by-step installation instructions. The Buzz Saw Softail Bagger Kit fits all narrow tire HD Softail models from 1986-2000 (except Deuce models). YOU MAY ALSO NEED THESE Our Big Bag Stretched Saddlebags accept OEM stock hard bag lids. We also offer the Bagger Nation® line of Audio Saddlebag lids if you prefer. Bag lids and Hinge kit is sold separately. Part # SBK / Buzz Saw Softail Bagger Kit / Price: $3,495.00

Todd Deskin’s Softail - Photo: Michael Lichter

Featured: Buzz Saw Bagger Kit

Part #BLBS / Bag Lids / Price: $194.95

THIS PRODUCT IS PAINT READY

PAINTER APPROVED

Made in the USA

Part # HBHHK / Hard Bag Hardware & Hinge Kit / Price: $395.95

YOUR PAINTER WILL LOVE YOU

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

FENDERS & LICENSE PLATE ACCESSORIES

Softails.

CVO/UNIVERSAL STEALTH 3 LICENSE FRAME KITS Harley Davidson did a great job designing the CVO Baggers. However, the license plate looks like an after thought... No worries, Bagger Nation has you covered! Check out our plug and play Stealth 3 CVO License Frame Kit! This kit will clean up the look of your CVO, do away with the stock light box, and is a direct bolt on for all 2009-2013 HD CVO Touring models. Hidden LEDs in the frame light your plate, and it even has an HD electrical connection for simple installation. The Stealth 3 is easy to install on any fender, simply drill two 1/4” holes and mount to fender. Not required on CVO models. Available in both chrome and gloss black finishes. All hardware included. Part # - USLP3 / Universal Stealth III License Frame Kit (CVO’s and custom apps) Chrome / Price: $164.95

BEFORE

YAFTER - Black

PAGE

YAFTER - Chrome

602.840.4205 | BAGGERNATION.COM

FENDERS & LICENSE PLATE ACCESSORIES

Part # - USLP3-B / Universal Stealth III License Frame Kit (CVO’s and custom apps) Black / Price: $164.95

STEALTH II FRENCHED LICENSE KITS A must-do on any properly customized motorcycle is frenching (flush mounting) the license plate and frame. We have created a cool do it yourself kit just for that! We offer the French boxes in both steel (weld in) and composite (epoxy in) materials and each kit comes complete with your choice of a black or chrome Stealth II License Frame with hidden license light LED’s. The boxes and frames have a nice radius that compliments the curve of your fender. Simply cut a hole, install our French box, trim the side walls and paint. A must-do on custom baggers! *Fender must be at least 7” in width Part # FREN-K-C-C / Composite Frenched License Kit - Chrome / Price: $199.95 Part # FREN-K-C-B / Composite Frenched License Kit - Black / Price: $199.95 Part # FREN-K-S-C / Steel Frenched License Kit - Chrome / Price: $199.95

FENDERS & LICENSE PLATE ACCESSORIES

Part # FREN-K-S-B / Steel Frenched License Kit - Black / Price: $199.95

Todd Deskin’s Softail - Photo: Michael Lichter

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

SADDLEBAGS AND ACCESSORIES Super Stretch Saddlebags 1992-2015 - Page 36-37

SECTION

Big Bag Stretch Saddlebags 1992-2013 - Page 38-39 Saddlebag Claws 2009-2015 - Page 40-41 Tour Pack Wail Tail (all years) - Page 42 Chop Chop Tour Pack (all years) - Page 43 Luxury Liners and Tethers 1992-2013 - Page 44-47

PAGE

602.840.4205 | BAGGERNATION.COM

SUPER STRETCH SADDLEBAGS 2009-2015 Check out our NEW Bagger Nation® Super Stretch Saddlebags! These bags offer a full 8” rearward AND 4” downward stretch! We accomplish this with our exclusive outside beveled edge that allows us full turning clearance with a radical new look! Our Super Stretch Saddlebags are pre-drilled, accept stock HD lids and hardware, and of course are made of the highest quality materials available. Besides the killer look, the full-stretch means a bigger interior so you’ll realize about a 20% increase in storage room! The Bagger Nation® Super Stretch Saddlebags are available in dual outlet and no outlet configurations. Shown: Dual Outlet Super Stretch Pleated Fender,

We have direct bolt on, Super Stretch Fenders to match both styles of bags. And when you pair our awesome bags with one of our new Super Stretch Fenders, you’ll create a look for your

Bagger Dagger Lights, Dual Outlet Super

Bagger that simply can’t be beat!

Stretch Saddle Bags Part # BBSS-DO / Super Stretch Bags - Dual Outlet / Price: $1499.99

THIS PRODUCT IS PAINT READY

Part # BBSS-NO / Super Stretch Bags - No Outlet / Price: $1499.99 Part # BBSS-2014-DO / 2014/15 Super Stretch Bags - Dual Outlet / Price: $1499.99

2014-2015 COMPATIBLE

PAINTER APPROVED

Part # BBSS-2014-NO / 2014/15 Super Stretch Bags - No Outlet / Price: $1499.99

YOUR PAINTER WILL LOVE YOU

New 2014

ANGLED FOR MAX TURNING CLEARANCE See Exhaust Extenders on page 186

Larry’s 30” Bike / Sacramento, CA 2013 - Photo: Michael Lichter

602.840.4205 | BAGGERNATION.COM

Made in the USA

PAGE

602.840.4205 | BAGGERNATION.COM

SADDLEBAGS & ACCESSORIES

2014

BIG BAG STRETCHED BAGS Our Big Bag Stretched Bags are the highest quality aftermarket saddlebags we have ever seen! No expense has been spared creating these beautiful aerospace quality bags, and we won’t put anything else on our Baggers! These bags are stretched perfectly- all the way down, so you’ll also pick-up some extra bag capacity... but not too long to drag them in the turns! They also have a gorgeous scallop treatment on the side of the bag which is great for paint accents! The Big Bag walls are double-thick, pressure formed, resin transferred and baked at 300 degrees... all of which makes incredibly strong bags. Absolutely no cracking or warped bags from heat exposure. The Big Bag Stretched Bags are finished inside and out, and they are pre-drilled so your existing latches and lids will bolt right on! Bagger Nation ships these bags to you primed and ready for paint. Available in 3 exhaust outlet choices: dual outlets, single right-side outlet, and no exhaust oulet. We also have our custom Chupa Rear Fenders to match any style you choose! Part # BBNO / Big Bag Stretched Bags - No Outlet / Price: $1499.95 Part # BBDO / Big Bag Stretched Bags - Dual Outlet / Price: $1299.95 Part # BBRO / Big Bag Stretched Bags - Single Right Outlet / Price: $1399.95 Part # SBSP / Saddlebag Skid Plates - 1 Pair / Price: 59.95

THIS PRODUCT IS PAINT READY

PAINTER APPROVED

Made in the USA

YOUR PAINTER WILL LOVE YOU

Big Bags shown with no outlet Chupa Fender and CVO lights. Chop Chop

No Outlet

Single Outlet

Dual Outlet

Skid Plates Photo: Michael Lichter

602.840.4205 | BAGGERNATION.COM

PAGE

SADDLEBAGS & ACCESSORIES

Tour Pack on page 43

BAGGER NATION BAG CLAWS Here’s a super cool and innovative accessory for your custom Bagger project. Check out our NEW Bagger Nation Bag Claws! Paul created a one-off set of these for his first 26” wheel Road Glide way back in 2009. The response to the claws was instant overwhelming. It took us awhile to figure out how to turn them into a production part but here they are! Simply make one cut to the front of your saddlebag supports and the claws will bolt right on. They create a really cool guard for the front of your stretched saddlebags and add a ton of style and attitude. You can even have them run through your Swoop side covers if you’re using a set as shown on page #40. Each set of bag claws is formed to fit all 2009-2015 touring models. They are and mild modifications are required. Instructions and hardware included.

2014-2015 COMPATIBLE

Part # BAGCLAW / Bag Claw / Price: $199.00

Shown: Bag Claws fitted to customized Swoop Side Covers with brushed finish

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

SADDLEBAGS & ACCESSORIES

forged from cold steel and then beautifully chrome plated. Sold in pairs

CHOP CHOP ULTRA SLIM TOUR PACK

New

We love our Chop Chop Ultra Slim Tour Pack! Why? Well, it’s a full 2.5” slimmer than HD’s chopped pack, that’s why! The Bagger Nation® Chop Chop is made from high quality fiberglass, flawlessly gel coated, and each kit comes assembled with genuine HD hinges and latches (and a cool little back rest for the ladies!) The packs are direct bolt on fitment for HD’s tour pack racks and work great with detachable components. Paul thinks the Chop Chop is killer for weekend getaways... keeping his

Option 2

Bagger low and long, yet still allowing him plenty of storage space for longer trips. Suzy says the pack is totally comfortable to lean back on and far more

WAIL TAIL

comfortable than a sissybar... and the best part is she can pack all the shoes she wants! WOO HOO!

Check out this bad-ass accessory for our Chop Chop Tour Pack. Introducing the NEW Bagger Nation® Wail Tail! The Wail

Option #1- For those of you who may be less mechanically inclined, you can

Tail makes any Bagger tour pack look like it’s going 100mph

purchase the Chop Chop Ultra Slim Tour Pack fully assembled with our

while sitting still! Our NEW Wail Tail gives any tour pack a

Chop Chop backrest installed. You can still custom paint it, just have your

serious race-ready look and really dresses up a boring tour

Backrest Now Sold Separately!

painter carefully tape off the hinges and latches.

pack lid! Talk about sexy!

Option #2- For those planning a custom paint job, purchase Chop Chop Ultra

The Wail Tail is designed to fit seemlessly to our Chop Chop

Slim Tour Pack in kit form, which comes unassembled and includes all

Tour Pack*. Each Wail Tail is perfectly pressure molded, tions are included, and some modification is required. *Our Wail Tail fits all OEM HD tour packs, however it may

Part # CCTP-1 / Complete Assembled / Price: $633.95 Part # CCTP-2 / Unassembled Kit With Backrest / Price: $578.95 Part # CCTP-S / Heavy Support Plate / Price: $28.00 - (Recommended)

interfere with tour pack lid racks if so equipped.

Part # CCTP-B / Backrest & Hardware Kit / Price: $149.95

Part # YWT / Wail Tail / Price: $299.99

THIS PRODUCT IS PAINT READY

2014-2015 COMPATIBLE

THIS PRODUCT IS PAINT READY

PAINTER APPROVED

YOUR PAINTER WILL LOVE YOU

Made in the USA

Option 1

YOUR PAINTER WILL LOVE YOU

Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

SADDLEBAGS & ACCESSORIES

needed latches, hinges hardware, and backrest.

smooth as glass, and paint-ready. All hardware and instruc-

CHOP CHOP LINERS We know you installed our Bagger Nation速 Luxury Liners in your saddlebags. Well, complete the look with our Chop Chop Liners! Not only a fun way to set your bike apart from the crowd, our Liners also supply a layer of protection for the junk you put inside! Just like our Luxury Liners, the Chop Chop Liners are available in 5 colors: Black, Grey, Red, Green and Blue, as well as 4 fun animal prints! Part # CCTP-L-BLK / Chop Chop Liners - Black / Price: $249.95 Part # CCTP-L-BLU / Chop Chop Liners - Blue / Price: $249.95 Part # CCTP-L-GRAY / Chop Chop Liners - Gray / Price: $249.95 Part # CCTP-L-GRE / Chop Chop Liners - Green / Price: $249.95 Part # CCTP-L-RED / Chop Chop Liners - Red / Price: $249.95 Part # CCTP-L-CHE / Chop Chop Liners - Cheetah / Price: $249.95 Part # CCTP-L-GIR / Chop Chop Liners - Giraffe / Price: $249.95 Part # CCTP-L-TIG / Chop Chop Liners - Tiger / Price: $249.95 Part # CCTP-L-ZEB / Chop Chop Liners - Zebra / Price: $249.95

SADDLEBAGS & ACCESSORIES

Colors: Grey, Green, Blue, Red, Black, Giraffe, Cheetah, Tiger, Zebra

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

BAGGER NATION® SADDLEBAG TETHERS Here at Bagger Nation®, we’ve been installing these tethers on all of our shop built bikes since the beginning! Well, the word got out and everybody wanted a set... so here they are! They are the perfect finishing touch for your Bagger, or they make a great gift! Easy to install, and swap-out, our tethers are available in 5 embroidered colors: Black, Red, Silver, Green, or Blue. Part # SBT-BLACK / Black on Black / Price: $39.95 Part # SBT-RED / Red on Black / Price: $39.95 Part # SBT-SILVER / Silver on Black / Price: $39.95 Part # SBT-GREEN / Green on Black / Price: $39.95 Part # SBT-BLUE / Blue on Black / Price: $39.95

THE ORIGINAL BAGGER NATION LUXURY LINERS Check out this totally cool way to set your bike apart from the crowd! Paul installed these saddlebag liners on his personal bikes, and the response to them was so overwhelming he created a “Do It Yourself” kit! The Original Bagger Nation® Luxury Liners fit all

The Original Bagger Nation® Luxury Liners come in either Bottoms only, or a complete set of Bottoms and Tops. They are available in 5 colors: Black, Grey, Red, Green and Blue, as well as 4 fun animal prints! When ordering, please note stock or stretched bags, and note Bottom only or Set. Bagger Nation® SaddleBag Tethers sold separately. Set of Bottom Liners for stock or stretched saddlebags / Price: $249.95 Complete set of four (2 tops/2 bottoms) / Price: $339.95 Please state stock or stretched bags when ordering Colors: Grey, Green, Blue, Red, Black, Giraffe, Cheetah, Tiger, Zebra

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

SADDLEBAGS & ACCESSORIES

HD stock bags and our Stretched Bags.

BODY & ACCESSORIES Swoop Side Covers 1992-2015 - Page 50-51 The SCOOWL™ Fairing Extension 1998-2013 - Page 52-53

SECTION

Throttle Body Gloves 2008-2015 - Page 54-55

Monkey Fairing Support Bars 2008-2013 - Page 56 Classic Fairing Support Bars 2008-2013 - Page 57 Builders Raked Fairing Support Bar Kits - Page 58-59 Trask Chin Scoops 1992-2015 - Page 60-61 Cobra Chin Scoops 2009-2015 - Page 62-63 Drop Seat and Side Cover Kits - Page 64-65

Shown: 2013 Road Glide, Super Stretch Saddlebags, Drop Seat Kit, Trask Chin Scoop, Monkey Fairing Support Bar, Scoowl Fairing Extension, 26” Speed Freak Wheel, Talon Front Fender

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

SWOOP SWOOP

S W O O P S W O O

SWOOP SIDE COVERS Create a seamless flow between our stretched tanks and saddlebags by adding a set of our Bagger Nation® Swoop Side Covers! Our 3-D molded composite stretched side covers are a direct snap-on replacement for your stock HD covers. They are not a skin that requires

SWOOP SWOOP

trimming, shaping, gluing or screwing... like others we’ve tried. Bagger Nation® Swoop Side Covers are 3-D molded (not open on the bag side) with perfect body lines, and shaped as narrow as possible up front so they won’t interfere with your legs while stopped. Bagger Nation® Swoop Side Covers fit perfectly every time, and complete the side profile of your Bagger! Swoop Side Covers are available in 2 styles, Smooth or Scooped. We offer them to fit a bevy of saddlebag styles: Stock / CVO / our Big Bag Stretched Saddlebags and our Super Stretch Saddlebags for all years 1992-2015.

S W O O P S W O O

WO O P S W O O SCSC

602.840.4205 | BAGGERNATION.COM

SSC

PAGE

OEM-SCSC

THIS PRODUCT IS PAINT READY

2014-2015 COMPATIBLE

PAINTER APPROVED YOUR PAINTER WILL LOVE YOU

Made in the USA

OEM-SSC

PAGE

602.840.4205 | BAGGERNATION.COM

BODY & ACCESSORIES

SWOOP SWOOP

Part # SSC / Smooth Swoop Side Covers 2009 - 2013 / Price: $699.00 Part # SSC-08 / Smooth Swoop Side Covers 1997 - 2008 / Price: $699.00 Part # SCSC / Scooped Swoop Side Covers 2009 - 2013 / Price: $699.00 Part # SCSC-08 / Scooped Swoop Side Covers 1997 - 2008 / Price: $699.00 Part # OEM-SSC / Smooth Swoop Side Covers OEM 2009 - 2013 / Price: $699.00 Part # OEM-SSC-08 / Smooth Swoop Side Covers 1997 - 2008 / Price: $699.00 Part # OEM-SCSC / Scooped Swoop Side Covers OEM 2009 - 2013 / Price: $699.00 Part # OEM-SSC-08 / Scooped Swoop Side Covers 1997 - 2008 / Price: $699.00 Part # SSC-14 / Smooth Swoop Side Covers 2014 / Price: $699.00 Part # SCSC-14 / Scooped Swoop Side Covers 2014 / Price: $699.00 Part # OEM-SSC-14 / Smooth Swoop Side Covers OEM 2014 / Price: $699.00 Part # OEM-SCSC-14 / Scooped Swoop Side Covers OEM 2014 / Price: $699.00

THE SCOOWL™ FAIRING EXTENSION Road Glide fans unite! Our awesome new fairing extension will transform the look of your Road Glide! The SCOOWL™ Fairing Extension will give your Bagger a vicious and angry stare! The SCOOWL™ is a direct replacement on 1998 - 2013 Road Glides and can be installed as is

*2010 and earlier models can use a 2010 and later headlight kit (Optional / Sold Separately) US Patent D683,495 S Part # SFE / The Scoowl™ Fairing Extension / Price: $159.95

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

BODY & ACCESSORIES

or painted to match your bike.

. e v o l o n e v o l no g

THROTTLE BODY GLOVE

If you have changed out your boring stock ham can air cleaner for something smaller, better flowing and sexier, unfortunately, you’ve exposed the wiring and connector for the servo unit on 2008 and later Fly-By-Wire models. We hated that too, so we designed the Throttle Body Glove! This super slick molded cover slips right over your stock throttle body and not only cleans up the entire throttle body area, it perfectly hides the ugly wire and connector that is on the left side! Each Throttle Body Glove comes complete with mounting hardware and instructions and is super easy to install! You can get our New Throttle Body Glove in a primer finish if you want to paint it as a cool accent to your custom paint scheme, or you can get one in a black texture finish to match your engine if you want a little more stealth application. Either way you’ll love how the super trick accessory will clean up your air cleaner area and hide that ugly eye sore! The below 2 part #’s will fit with our Force Elbow Air Cleaner or HD’s Heavy Breather Air Cleaners and similar products Part # TBG-F-RAW / Throttle Body Glove - Primer / Price: $87.95 Part # TBG-F-BK / Throttle Body Glove - Black Texture / Price: $97.95 The below 2 part #’s will fit with most after-market air filters with a round back plate such as a PM, Ness or RSD type filter

New

THIS PRODUCT IS PAINT READY

PAINTER APPROVED YOUR PAINTER WILL LOVE YOU

Part # TBG-R-RAW / Relief Throttle Body Glove - Primer / Price: $87.95

BODY & ACCESSORIES

Part # TBG-R-BK / Relief Throttle Body Glove - Black Texture / Price: $97.95

Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

MONKEY FAIRING SUPPORT BARS

FAIRING SUPPORT BARS

The perfect evolution of our standard fairing support bars was to remodel them to compliment

Tricking out your Road Glide? Our Fairing Support Bar will allow you to remove your

the look of our world famous Monkey Bar® handlebars. Now even a simple fairing support can

bulky engine guard and replace it with our stealth unit. Specifically created for HD’s

have the Bagger Nation® attitude and style!

Road Glide frame, our Road Glide Fairing Support Kit is handmade here at our shop and available in Chrome or Gloss Black finishes. Check out our Turn Signal Eliminators and LED windshield trim for a total custom look! Available in satin black by special order! Part # FSB08-C / Fairing Support Bar 2008 & Earlier - Chrome / Price: $149.95 Part # FSB08-B / Fairing Support Bar 2008 & Earlier - Black / Price: $149.95 Part # FSB-C / Fairing Support Bar 2009 - Chrome / Price: $149.95 Part # FSB-B / Fairing Support Bar 2009 - Black / Price: $149.95 Part # FSB10-C / Fairing Support Bar 2010-2013- Chrome / Price: $149.95 Part # FSB10-B / Fairing Support Bar 2010-2013- Black / Price: $149.95

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

BODY & ACCESSORIES

Part # MFSB08-C / Monkey Fairing Support Bar 2008 & Earlier - Chrome / Price: $249.95 Part # MFSB08-B / Monkey Fairing Support Bar 2008 & Earlier - Black / Price: $249.95 Part # MFSB-C / Monkey Fairing Support Bar 2009 - Chrome / Price: $249.95 Part # MFSB-B / Monkey Fairing Support Bar 2009 - Black / Price: $249.95 Part # MSFB10-C / Monkey Fairing Support Bar 2010-2013- Chrome / Price: $249.95 Part # MFSB10-B / Monkey Fairing Support Bar 2010-2013- Black / Price: $249.95

BUILDERS RAKED FAIRING SUPPORT BAR KIT For designers that are going the extra mile with their Road Glides, Bagger Nation速 offers this raw Fairing Support Bar Kit! After the fairing is relocated, our Fairing Support Bar can be finished for a perfect fit on your raked Road Glide. Each Kit comes complete with a semi-finished Fairing Support Bar and two feet for welding 2010-2013. Part # MRFSB / Raked Fairing Support Bar (Thru 2008) / Price: $120.00 Part # MRFSB-09 / Raked Fairing Support Bar (2009) / Price: $120.00 Part # MRFSB-10 / Raked Fairing Support Bar (2010-2013) / Price: $120.00

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

BODY & ACCESSORIES

on. There are 3 choices depending on your model year. Through 2008 / 2009 only /

Optional Grill

Chin Scoop for Stock Bikes

Chin Scoop for Raked Bikes

TRASK CHIN SCOOP Chin Scoops have been around for years, but our NEW Trask Chin Scoop is the coolest one we’ve seen! This composite, frame covering chin has a perfect balance of size and shape. The Trask Chin Scoop creates incredible continuity between the frame and front fender. The Trask Chin Scoop is a direct bolt on component for all HD touring models, and it works with or without oil coolers. Each part is shipped primered, ready to scuff and paint.

Please note model year and rake/ non-rake when ordering. Part # TCS / Trask Chin Scoop - Rake / Price: $279.99 Part # TCS-08-STOCK / Trask Chin Scoop - 2008 & Earlier Stock / Price: $279.99 Part # TCS-09-STOCK / Trask Chin Scoop - 2008 & Later Stock / Price: $279.99 Part # / TCS-14-STOCK / Trask Chin Scoop - 2014 Stock / Price: $279.99 Part # / TCS-14-RAKED / Trask Chin Scoop – 2014 Rake / Price: $279.99 Part # TCS-G-STOCK / Optional Grills For Stock Size Scoop / Price: $29.95 Part # TCS-G / Optional Grills For Rake Size Scoop / Price: $29.95

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

BODY & ACCESSORIES

Check out our optional Perforated Screen Kit for a cool accent for the scoop ports!

COBRA CHIN SCOOP Check out the latest killer looking chin scoop design from Paul Yaffe’s Bagger Nation! The NEW Cobra Chin Scoop was created to fit seamlessly with our Classic style fender and our tire-hugging Thicky, DEI, or Talon fenders! The NEW Cobra Chin Scoop will give an “all-business” attitude to any custom Bagger. It features a billet grill that conjures images of a 60’s muscle car ready to tear up the streets! Each 3-D molded composite chin scoop features a hidden mounting block, satin finished scoop grill and all necessary hardware. We offer two versions- one for stock bikes with limited clearance between the front fender and frame, and the second features an exaggerated chin and is meant for raked Baggers where fender to frame clearance is not an issue. Each versions is available for 2009-2013 models and we also offer a 2014-2015 version. Direct bolt-on, simple

New

installation. No modifications are necessary. We offer features 2 grill options. The Speed Freak Grill (included), or the optional Tech Grill, which features exposed screws around the perimeter of the bezel. To choose the optional Tech Grill, add a –T to the end of the part #. Ex. Part# COBRA-09/13-STK-T would get you a 2009-2013 Stock Frame Cobra Chin Scoop with the optional Tech Grill. Part # COBRA-09/13-STK / Cobra Chin Scoop - 2009-2013 Stock Frame / Price: $399.95 Part # COBRA-09/13-RAKE / Cobra Chin Scoop - 2009-2013 Raked Frame / Price: $399.95 Part # COBRA-2014-STOCK / Cobra Chin Scoop - 2014 Stock Frame / Price: $399.95 Part # COBRA-2014-RAKED / Cobra Chin Scoop - 2014 Raked Frame / Price: $399.95

THIS PRODUCT IS PAINT READY

PAINTER APPROVED YOUR PAINTER WILL LOVE YOU

COBRA-09/13-Rake with Speed Freak™ Grill

COBRA-09/13-Rake with optional Tech Grill

Shown: COBRA-09/13-RAKE with Speed Freak™ Grill Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

BODY & ACCESSORIES

2014-2015 COMPATIBLE

DROP SEAT AND SIDE COVER KIT

New

Bagger Nation® and Bagger Werx have joined forces to create the ultimate Drop Seat Kit for 2009 and later HD Touring models. Our incredible looking Swoop Side Covers flow seamlessly from our Stretch Tanks into our Stretch Saddlebags! This direct bolt-on kit allows for a 3” drop in seat height! These three components, when used together, totally customize your Bagger! The Drop Seat Kit includes everything you’ll need for installation including straight forward, step-by-step instructions. All your stock components have been relocated and the kit works perfectly on both ABS and non-ABS equipped bikes. One of our steel Stretch Tank kits is required and a custom seat will be needed as well.

Part # DSK-KIT / Drop Seat Frame, Side Covers & Seat Pan Kit / Price: $2241.89 Part # DSK / Drop Seat Kit Only / Price: $1236.95 Part # DSSCK / Side Covers Only / Price: $804.95 Part # DSP / Seat Pan Only / Price: $199.99 Part # STK08 / Stretch Tank Kit 2008 - Later / Price: $799.95

Shown:

Note: Not for lowered bikes.

Drop Seat Kit with Super Stretch Saddlebags and Double Trouble Audio Lids

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

BODY & ACCESSORIES

Custom seat pan sold separately.

srt STEAM ROLLER TOURING SECTION

04 SRT - STEAM ROLLER TOURING We’ve had enough of these crazy big wheel Baggers! Ridiculous trailer queen show bikes that you can’t even ride anywhere except the local watering hole! 32” wheels… REALLY? So, in an attempt to return some sanity, yet still keep it cool, we introduce the anti-Ferris wheel! Meet the SRT… SRT stands for Steam Roller Touring and that’s exactly what a 220/50 R20 tire looks like on the front of a Bagger, a steam roller! Paul likes to call the SRT a “Muscle Bagger”. Wide, mean, aggressive stance and a 100% gas to ride! “It handles like a sport bike” says Paul. What you’ll find on the pages to follow are the “key ingredients” to creating your own muscle Bagger… We’ll keep adding to the section as we build more SRT’s. The orders are flying in! Stay tuned. See more of the SRT @ http://www.youtube.com/watch?v=BoX9hTFS4us&feature=youtu.be Get all the pictures @ http://www.baggernation.com/0414-srt/

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

srt STEAM ROLLER TOURING

WIDE RAKE BLOCK AND TREE KIT

YAXLE FOR WIDE TREES

A 220/50R20 tire measures the same outer diameter as a 23” front tire so our 23”

We make a special Yaxle that is 1” longer to accommodate the increased width of our FIWIA

rake and trail geometry works perfectly! By raking your frame with our patent pending

Tree Kits… Simply choose your model year Yaxle part # and the style of Yaxle cap part # your

neck block and then correcting the trail with our X-tra Wide raked Triple Trees you’ll

prefer and your almost ready to roll! Example: WYAX-25-BSYC = 25mm wide Yaxle w smooth

create the perfect environment for your big wheel to live. This kit comes with Neck

black caps

Block, Triple Tree Kit and step by step instructions to rake your frame. Part # WYAX-10 / Wide Yaxle for 1” bearings / Price $199.95 (Includes Yaxle Cap) Part # WYAX-25 / Wide Yaxle for 25mm bearings / Price $199.95 (Includes Yaxle Cap) Part # SFYC / Speed Freak Yaxle Cap chrome (pair) Part # BSFYC / Speed Freak Yaxle Cap black (pair) Part # YYC / Yafterburner Yaxle Cap chrome (pair) Part # BYYC / Yafterburner Yaxle Cap black (pair) Part # DYC / Domino Yaxle Cap chrome (pair) Part # BDYC / Domino Yaxle Cap black (pair) Part # SYC / Smooth Yaxle Cap chrome (pair) Part # BSYC / Smooth Yaxle Cap black) (pair)

Part # FIWIA-08 / Wide Tree and Rake Kit - 2008 and earlier / Price: $$1160.95 Part # FIWIA-09 / Wide Tree and Rake Kit - 2009 and later / Price: $$1160.95

New

New CLASSIC STRETCHED FENDER / FIWIA If you want to run a super fat tire you must have a super fat fender! We’ve taken our 23” Classic Stretched Fender and stretched it to the limit. Even at 8” wide the massive stretched so wide that we had to cut reliefs in the fender crown to allow clearance for the slider covers to travel… This fender is a great starting point for creating your own “Fat is Where it’s At” look! Part # WFFC-23 / Wide Classic 23” Fender / Price: $494.95

Patent Pending

Fat Is Where It’S AT!

Patent Pending

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

SRT - STEAM ROLLER TOURING

220/50R20 tire barely squeezes between the mount bosses. The fender had to be

TANK, DASH & SEAT SECTION

Razorback Stretched Tank Kits 2009-2015 - Page 72-73

6 Gallon Stretched Tank Kits 2005-2015 - Page 74 Steel Dresser Dash Kit for 6 Gallon Tanks - Page 75 Composite Dresser Dash Kit for 6 Gallon Tanks - Page 76 Road King and 5 Gallon Dash Kits - Page 77 Le Pera Custom Seats for Stretched Tanks - Page 78-79

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

New

orBac

Raz

ETCHED T

WIT

L H THE F

™

RAZORBACK™ TANK Everyone knows that Paul Yaffe’s Bagger Nation makes the coolest stretched tank kits in the industry! All steel, direct bolt-on and perfectly proportioned. Well guess what? He just oneupped himself! Check out the all new Bagger Nation Razorback Stretched Tank for all HD touring models 2010-2015. This super sexy, deep drawn, all steel stretched tank is the ultimate compliment to your custom Bagger project! Check out the way this tank flows seamlessly from front to back. Then check out how the stretch wings flow right into the side covers allowing your eyes to roll, uninterrupted along the bikes new sexy lines. The NEW Razorback Tank is a direct bolt-on replacement steel tank and requires NO modifications! No sanding, no gluing,

TANK, DASH & SEAT

no taping, no nothing! No plastic here, baby... just steel... real steel. Each 6.5 gallon Razorback tank kit is hand crafted and pressure tested at the factory. Each Razorback kit comes complete with tank, steel dash, chrome pop-up cap, rubber dash trim and hardware. Requires a custom Le Pera seat found on Page 78-79 - Sold separately. Patent Pending Part # STK-RZR / Razorback Tank / Price: $995.00 We recommend nickel plating your Razorback tank for a lifetime of corrosion protection. Please ask your Bagger Nation sales representative about our electroless nickel plating service…

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

6 GALLON STEEL STRETCH TANK KITS

STEEL DRESSER DASH

Paul and CCI have created a full capacity, 6 gallon, stretched, steel

Our latest Steel Dresser Dash design looks great on the new 2008 and later 6 gallon

tank that looks amazing with quality that’s unbeatable! This Kit is all

HD tanks! When the new HD touring gas tank got bigger, so did the OEM dash. This

you need to swap your boring stock tank for a sexy stretched one!

gave Paul the perfect opportunity to create a sleek, low- profile dash for your late

New

model tank application! The NEW Steel Dresser Dash for 6 Gallon Tank is sleek Each 6 Gallon Steel Stretch Tank Kit includes: (1) complete new tank,

and swoopy, the way Bagger Nation custom parts should be!

(1) steel low profile dash, a chrome pop-up gas cap and all the trim and hardware. *Seat modification required OR see our LePera stretched tank seats on pages 78-79. Part # STK07 / 6 Gallon Tank – 2005-2007 / Price: $799.95 Part # STK08 / 6 Gallon Tank – 2008 -2015 / Price: $799.95

Our NEW Steel Dresser Dash will bolt right on to your 6 gallon tank. Each steel dash is comes with a really trick chrome pop-up cap! The dash will fit on your stock tank but looks even better if you use one of our stretched tanks! The Steel Dresser Dash for 6 Gallon Tanks Kit includes: (1) Dash, a chrome pop-up gas cap, rubber trim, all hardware and installation instructions

TANK, DASH & SEAT

Part # DS-08 / Steel Dresser Dash / Price: $249.95

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

DRESSER DASH FOR 6 GALLON TANKS

ROAD KING DASH KIT

DRESSER DASH FOR 5 GALLON TANKS

Our latest Dresser Dash design looks great on the new 2008 and later 6 gallon HD

A sleeker, sexier look for Road Kings... Hell yes! Paul created this low-profile Road

Paul’s been making his fiberglass Dresser Dash for a dozen years. Lately it seems

tanks! When the new HD touring gas tank got bigger, so did the OEM dash. This

King Dash Kit utilizing a small (2”) Dakota Digital gauge that houses a speedo,

like everyone who’s jumpin’ on the Bagger craze has knocked-off the “Original”...

gave Paul the perfect opportunity to create a low-profile composite dash for your

tach, odometer, and all idiot light functions as well! Your ignition switch is moved

So Paul decided to make a new one! Our NEW dash features hidden hardware,

late model tank application! The new Dresser Dash for 6 Gallon Tanks is sleek and swoopy, the way Bagger Nation custom parts should be! Our new Dresser Dash will bolt right on to your 6 gallon model. Each dash is handlaid composite and comes with a really trick chrome pop-up cap! The dash will fit on your stock tank but looks even better if you use one of our stretched tanks!

trick mount brackets, a chrome plated, low profile pop-up cap, and a sunken scal-

to your upper motor mount and there’s an optional horn kit as well.

lop. The Dresser Dash bolts directly to stock OR stretched tanks and adds killer styling.

Each Road King Dash Kit includes: (1) Dash, (1) Dakota Digital gauge, (1)ignition switch holder, rubber trim and detailed instructions.

Paul’s new dash fits all models 1994-2007, carb or EFI models.

Horn kit sold separately.

The Dresser Dash for 5 Gallon Tank Kit Includes: (1) Dash, a chrome billet pop-up

The Dresser Dash for 6 Gallon Tanks Kit includes: (1) Dash, a chrome pop-up gas cap, rubber trim, all hardware and install instructions

gas cap, rubber trim, hidden hardware, and instructions Part # RKDK / Road King Dash Kit / Price: $699.99 Part # HRK / Horn Kit / Price: $149.95

Part # DD-CFI / Dresser Dash Kit - 5 Gallon Tanks / Price: $299.95

TANK, DASH & SEAT

Part # DD-FI08 / 6 Gallon Dresser Dash Kit 2008 - Later / Price: $299.95

Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

LE PERA CUSTOM SEATS FOR NEW BN RAZORBACK™ AND CCI TANKS stery for over 30 years! When we need a partner to create killer seat styles for our stretch tank line, Le-Pera was the obvious choice! Hell, Bob Le Pera used to make seats for Paul’s custom bicycles back in Paul’s San Fernando Valley days! Bob Jr. and Christine have created 4, super cool seats for our NEW Razorback Stretched Tanks and our CCI Classic Stretched Tank. So whatever your riding style may be, we are sure to have a seat to meet your needs. Le Pera seats start with a bullet proof steel pan that is perfectly shaped to match our tanks. They then create beautiful, sleek custom seats and upholster them from only the highest quality materials. The result is a perfect fitting seat that will compliment the smooth flow of your custom Bagger project while maintaining superior comfort and years of enjoyment.

Part # LPBB-07-S / Bare Bones Solo Seat 2007 / Price: $288.95 Part # LPBB-08-S / Bare Bones Solo Seat Stretched 2008 / Price: $302.95 Part # LPSS-07 / Silouhette Seat For Stretched 2007 / Price: $369.99 Part # LPSS-08 / Silhouette Seat Stretched 2002-2007 / Price: $369.99 Part # LPVIS-08 / Villain Seat For Stretched 2008 / Price: $599.00 Part # LPSOS-07 / Sorrento Seat Stretched 2007 / Price: $599.00 Part # LPSOS-08 / Sorrento Seat For Stretched 2008 / Price: $599.00

Part # LPBB-10/15-RZR / Bare Bones Solo Seat for Stretched Razorback 2010-2015 / Price: $302.95 Part # LPSOS-10/15-RZR / Sorrento Seat for Stretched Razorback 2010-2015 / Price: $599.00 Part # LPSS-10/15-RZR / Silhouette Seat for Stretched Razorback 2010-2015 / Price: $369.99 Part # LPVIS-10/15-RZR / Villian Seat for Stretched Razorback 2010-2015 / Price: $599.00

BARE BONES

SILHOUETTE

VILLAIN

SORRENTO

This classic solo seat is the ultimate “less-is-more” look for those who love

Sleek and minimal with a super low profile and body complimenting curves.

Unique and aggressive custom LePera styling in a truly trick looking “two-

This is the best looking touring seat we have ever seen! Plenty of cushion for

the exposed rear fender look.

This seat seamlessly connects the swoop of our stretch tank with the rear

up” platform. A compliment to any custom Bagger project.

long hauls yet still incredibly stylish without overpowering the custom lines

body of the any Bagger.

602.840.4205 | BAGGERNATION.COM

PAGE

of your Bagger.

PAGE

602.840.4205 | BAGGERNATION.COM

TANK, DASH & SEAT

The Le Pera name has been synonymous with comfort and quality when it comes to custom motorcycle seats. Le Pera is an industry leading company and has been creating cutting edge uphol-

TRICK OUT YOUR TRIKE The HD Trike platform is quickly catching on and could certainly use a dose of “Cool”! No worries, Bagger Nation® is on the case. You can find everything you’ll need to trick out your Trike in the 2015 Bagger Nation® catalog. From killer new body parts, chrome accessories, big wheel rake and adapter kits, even air systems and stereos, Bagger Nation® has got you covered. So if a bad-ass Trike is your dream, we’ve got the bling! *5 on 4.5 lug pattern / Use +10 - +20 wheel offset / 8.5” x 20” rim Chop Trike Tour Pack Roll Pan

SECTION

06 Part # BWTF / Big Wheel Fenders (11.5” Inside) / Price: $1568.95 pr. Part # TWA / 4 hole/5 hole wheel adapters / Price: $560.95 pr.* Part # TLK / Trike Lowering Kit / Price: $199.95 pr. Shown:

TRIKE ACCESSORIES

2010 FLHXXX with all Bagger Nation trike accessories, Rake kit, 26” High 5 Wheel and Classic Stretch 26” fender

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

RAKE YOUR BAGGER SECTION

Rake Your Neck Kit for 30” Wheels 2009-2015 - Pages 84-85 7 and 9 Degree Raked Triple Trees 1986-2015 - Pages 86-87 7 and 9 Degree “Chop Your Neck Kits” 1986-2015 - Pages 86-87 Raked Road King Nacelles for 23”, 26” and 30” Wheels - Pages 88-89 Exchange Raked Batwing Fairings 1999-2015 - Pages 90-91 Exchange Road Glide Raked Fairing Bracket 2004-2013 - Pages 92

PAGE

602.840.4205 | BAGGERNATION.COM

THE BAGGER NATION® RAKE UR NECK KIT FOR 30” WHEEL When Paul decided to create the ultimate 30” wheel build, he knew there were complicated issues to be addressed. Paul and other builders, such as Brian from Hatred Cycles, considered the challenges associated with 30” builds and discussed the solutions required to market the best big wheel kit. First up, raise the neck as little as possible, yet create enough room for 4” of fender travel. Paul shortened the steering head 2”, which allowed a 30” wheel to occupy the same space as a 26” wheel. Then, he increased the steering head diameter to accept new bearings with a side-load rating double that of standard Timken’s. This assured the increased load from the new rake angle would not diminish the integrity of the steering head bearings. Paul’s next task was to keep all OEM fairing mount points consistent, allowing all stock parts to be re-installed. Paul then designed an arched lower triple tree to take advantage of the clearance created by shortening the steering head. Paul had previously

New

collaborated with Mark at HHI and they discussed the engineering and Mark took Paul’s arched tree concept and created our new Arched 12* Tree Kit for 30” wheels. Lastly, Paul compiled what was needed in a 30” wheel rake “kit” for our Bagger Nation® customers. After much R&D and test riding, Paul presents the Bagger Nation® Rake UR Neck Kit for 30” Wheels. Our complete Kit looks great, handles properly, and maintains the perfect rake and trail you desire in a 30” wheel Bagger! The Bagger Nation® Rake UR Neck Kit for 30” Wheels includes: (1) -2” 12* rake steering head, (1) new frame skin, (1) new fork lock plate, (1) new neck/ head assembly. Detailed installation instructions. Our Kit is a weld-in application and requires the removal of the OEM steering head. Applicable to model year 2009-2013 If a 30” wheel build is the Bagger look and style you crave, Bagger Nation® has created the single most comprehensive, all-inclusive, precisely engineered, great riding 30” wheel kit on the market! The Bagger Nation® Rake UR Neck Kit is the industry standard, and gives your Bagger the perfect geometry and hi-quality engineering you expect from Paul Yaffe. Patent Pending

RAKE YOUR BAGGER

Part # 30-RYNK / Raked Triple Trees and Rake UR Neck Kit for 30” Wheel / Price: $1,699.00

PAGE

602.840.4205 | BAGGERNATION.COM

rake it Right!

Patent Pending

7 OR 9 DEGREE RAKED TREE KITS

CHOP YOUR NECK KIT

Do you love your Bagger but want to take it to another level? If so, then our

If you’ve decided to rake your Bagger using our Triple Trees then this kit is a

Raked Tree Kits are for you! Pricey? You bet! Easy to install? No way! Totally

must! Bagger Nation provides all the “know how” to make the job a breeze!

bitchin’? Hell Yeah! This truly IS the best way to install a 23” or 26” wheel and The Bagger Nation Chop Your Neck Kit includes: (1) pre-raked neck block, a cradle

make your Bagger look 9 feet long!

rail gusset, fork stops (if needed), and a full color tip sheet showing you how we cut and rake a Bagger frame.

Paul and his crew spent countless hours of head-scratchin’ and spittin’... and Bagger out and still have it handle perfectly!

Our Raked Tree Kit IS required with purchase.

The Bagger Nation® Raked Tree Kit includes: A really nice set of HHI triple

The Chop Your Neck Kit is available for all models and years. Please note size of

trees and our optional Rake Block Kit that comes with a picture-by-picture

wheel to be used.

outline showing you everything you’ll need to do to set your bike up right! Patent Pending Yes there is cutting, chopping, welding, grinding and cussing involved... it’s also expensive and takes time. But hey, if it was cheap and easy, everybody

Part # RNB7 / Raked Neck Block 7 Degree for 23” Wheel / Price: $149.95

would do it!

Part # RNB7-09 / Raked Neck Block 7 degree for 2009-2015 / Price: $169.95 Part # RNB9 / Raked Neck Block 9 Degree for 26” Wheel / Price: $149.95 Part # RNB9-09 / Raked Neck Block 9 degree for 2009-2015 / Price: $169.95

Part # RTTK / Raked Triple Tree Kit 7 Degree / Price: $792.95 Part # RTTK9 / Raked Triple Tree Kit 9 Degree / Price: $792.95 Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

Made in the USA PAGE

602.840.4205 | BAGGERNATION.COM

RAKE YOUR BAGGER

finally devised the perfect combination of rake and trail so you can lay your

RAKED ROAD KING NACELLES Bagger Nation® has thought of everything when it comes to raking your Bagger, and we make it available to you! Check out our Road King Raked Nacelle! When you rake your Road King, you’re left with a headlight pointing to the sky like a bat-signal... no worries, Paul solved the problem! Choose one of our Raked Road King Nacelles and correct your headlight position AND add killer styling at the same time! Each high-pressure composite Nacelle fits our raked trees perfectly and will accept your stock riser cover, cowling spear and headlight assembly. Our Raked Road King Nacelle is composite, primed, and ready for paint. Part # RN / Raked Nacelle for 23” and 26” Wheel / Price: $449.95 Part # RN-30 / Raked Nacelle for 30” Wheel / Price: $485.95

RAKE YOUR BAGGER

Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

EXCHANGE RAKED FAIRINGS 1999-2015 1999-2013

New

Bagger Nation® has thought of everything when it comes to raking your Bagger, and we make

Shown:

it available to you! Check out our Raked Fairings!

2010 Raked Street Glide,

Visor Model

Visor and Scoop Fairing

When you rake your Ultra, Electra, or Street Glide, you’re left with a headlight pointing to the sky like a bat-signal... no worries, Paul solved the problem! Choose from our three styles of Raked Fairings that will correct your headlight position and add killer styling at the same time! Just send us your stock fairing and we’ll send you back the fairing of your choice, all tricked out and ready for the paint shop. We’ve created a raked scoop design for the new 2014/15 Rushmore fairing too! Our new scoop

2014

design adds an aggressive, radical look to HD’s new fairing design and still allows full use of the air passage and trim! We offer the 2014/15 fairing in a raked and scooped version only

1999-2013

because that’s how we think it looks best. Please note wheel size and visor style when ordering.

Standard Model Part # EXRF23 / Raked Electra Glide Fairing 23” Wheel / Price: $599.00 Part # EXRF26 / Raked Electra Glide Fairing 26” Wheel / Price: $599.00 Part # EXRFV23 / Raked Electra Glide Fairing w/ Visor 23” Wheel / Price: $825.00 Part # EXRFV26 / Raked Electra Glide Fairing w/ Visor 26” Wheel / Price: $825.00 Part # EXRFVS23 / Raked Electra Glide Fairing w/ Visor & Scoop 23” Wheel / Price: $1299.00 Part # EXRFVS23-14 / Raked Electra Glide Fairing w/ Visor & Scoop 23” Wheel / Price: $1299.00

THIS PRODUCT IS PAINT READY

2014-2015 COMPATIBLE

PAINTER APPROVED YOUR PAINTER WILL LOVE YOU

Part # EXRFVS26-14 / Raked Electra Glide Fairing w/ Visor & Scoop 26” Wheel / Price: $1299.00

1999-2013

Visor & Scoop Model Made in the USA PAGE

PAGE

602.840.4205 | BAGGERNATION.COM

RAKE YOUR BAGGER

Part # EXRFVS26 / Raked Electra Glide Fairing w/ Visor & Scoop 26” Wheel / Price: $1299.00

EXCHANGE ROAD GLIDE RAKED FAIRING BRACKET Bagger Nation has thought of everything when it comes to raking your Bagger, and we make it available to you! Check out our Road Glide Raked Fairing Brackets!

Shown: 2013 Road Glide With Raked Neck Block

When you rake your Road King, you’re left with a headlight pointing to the sky like a bat-signal... no worries, Paul

and Tree Kit for a

solved the problem!

26” Wheel

Send us your Fairing Bracket and we’ll send you our Raked Fairing Bracket that corrects your fairing position. This product is customized using stock HD components which is why we label them “Exchange”. This means that we trade you our customized components for your stock ones. Each bracket is painted gloss black and ready to install. Please note 23” or 26” wheel when ordering. Additional fairing modification required. Part # EXRGRFB23 04-08 / Exchange RG Raked Fairing Bracket 04-08 23” Wheel / Price: $249.95 Part # EXRGRFB23-09 / Exchange RG Raked Fairing Bracket 2009 23” Wheel / Price: $249.95 Part # EXRGRFB23 / Exchange RG Raked Fairing Bracket 2010-2013 23” Wheel / Price: $249.95 Part # EXRGRFB26 04-08 / Exchange RG Raked Fairing Bracket 04-08 26” Wheel / Price: $249.95 Part # EXRGRFB26-09 / Exchange RG Raked Fairing Bracket 2009 26” Wheel / Price: $249.95

RAKE YOUR BAGGER

Part # EXRGRFB26 / Exchange RG Raked Fairing Bracket 2010-2013 26” Wheel / Price: $249.95

602.840.4205 | BAGGERNATION.COM

PAGE

LIGHTS Bagger Dagger Taillights - Pages 96-97 EZ LED Taillights (Middle Finger, Snake Eye & Delux) - Pages 98-99 EZ French Boxes (Middle Finger, Snake Eye & Delux) - Page 100

SECTION

Wedgy LED Lights With French Boxes - Page 101 Brake Light Strobing Module - Page 101 Road Glide Windshield Trim w/o LED Signals - Pages 102-103 Road Glide Windshield Trim with Super Bright LED Signals - Pages 102-103 Super Bright LEDâ&#x20AC;&#x2122;s Amber and Red - Page 104 Badlands Load Equalizers - Page 105

Bag Light Install Kits - Page 105

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

BAGGER DAGGER TAILLIGHTS Innovation is what Bagger Nation速 is known for, and our uniquely styled Bagger Dagger LEDs are just that! Bagger Dagger LEDs are designed to fit our 2009 and later Chupa and Super Stretch Fenders. Our billet bezels are CNC machined from 6061-T6 aluminum, then beautifully chrome plated or black anodized with an accent-cut perimeter edge. We then add four of our super-bright LED boxes for incredibly bright brake-light, taillight and turn signal functions! Each Bagger Dagger Taillight Kit includes: Bezels, lenses and LED boxes, wiring instructions and stick on templates to make drilling and cutting for install a snap!

Shown: Surface mounted

We recommend our Badlands Load Equalizer to regulate turn signal flashing speed.

Chrome Bagger Dagger

Part # BDL-C / Chrome Bezels / Price: $475.00

lights

Part # BDL-B / Black Accetn Cut Bezels / Price: $475.00

LIGHTS

New

602.840.4205 | BAGGERNATION.COM

PAGE

602.840.4205 | BAGGERNATION.COM

Now Even Brighter!

New EZ LEDs® Bagger Nation EZ LEDs are classically styled light units that are filled with 32 super-bright LEDs, and have running light, brake light and turn signal functions! We call them EZ LEDs because they are so EZ to install! EZ LEDs will add some killer style to your Bagger project. Mount them on your saddlebags, your fillers or any flat surface you choose! Bagger Nation® offers the EZ LEDs in 3 awesome styles: The Snake Eye, The Middle Finger and our newest, The Delux. We recommend our Badlands Load Equalizer to regulate turn signal flashing speed. Middle Finger size: 5.5”x1” Snake Eye size: 6”x1.25” Delux size: 6”x1.375” Delux Lights - 1.25”x6”

Snake Eye - 1.25”x6”

Middle Finger - 1”x5.5”

Part # EZSE-C / Snake Eye Lights - Chrome / Price: $238.95 Part # EZSE-B / Snake Eye Lights - Black / Price: $238.95 Part # EZMF-C / Middle Finger Lights - Chrome / Price: $238.95

Shown: Surface mounted Chrome Snake Eye

Part # EZMF-B / Middle Finger Lights - Black / Price: $238.95 Part # EZDLUX-C / Delux Lights - Chrome / Price: $238.95 Part # EZDLUX-B / Delux Lights - Black / Price: $238.95 Part # BSM / Brake Light Strobing Module / Price:38.95

LIGHTS

lights

Made in the USA PAGE

PAGE

602.840.4205 | BAGGERNATION.COM

FLUSH IS COO

FRENCHIE EZ BOX Our EZ LEDs add slick, super-bright LED lighting to the back of your Bagger. Now, our NEW new Frenchie EZ Box lets you mount our LEDs to virtually any surface- flat, radius, convex, whatever! The Frenchie lip is extra-deep to accommodate the thickest materials or sharpest bends and curves. Simply cut out the template shape, epoxy our Frenchie EZ Box into whatever surface you want, and sand to shape. Once installed and painted, you’ll have a clean, professional frenched look with minimal effort!

WEDGY BAG LIGHT KIT Our world famous Wedgy Lights have been an industry standard for years! They can be surface mounted or frenched with our exclusive Frenchy Boxes that are now included with every pair! They feature super-bright LEDs that function as taillights, turn signals and brake lights, and increase your visibility over 50%! Our Wedgy’s are machined from 6061-T6 billet aluminum then beautifully chrome plated, making your Bagger look 100%

Instructions included. Sold in pairs.

cooler!

Another killer innovation from the minds at Bagger Nation®!

Part # WEDGY-P / Wedgy Light, Pair / Price: $299.00 Part # BSM / Brake Light Strobing Module / Price: $38.95

Part # FREN-EZSF / Frenchie EZ Box - Snake Eyes / Price: $119.99 Part # FREN-EZMF / Frenchie EZ Box - Middle Finger / Price: $119.99

New

Middle Finger

Snake Eye

now ONLY

$299

Shown: Frenched mounted

LIGHTS

Chrome Snake Eye lights Shown: Two pair of frenched Chrome Wedgy lights. Custom install.

602.840.4205 | BAGGERNATION.COM

PAGE

100

PAGE

101

602.840.4205 | BAGGERNATION.COM

SUPER BRIGHT LEDs

ROAD GLIDE WINDSHIELD TRIM WITH OR WITHOUT SUPER BRIGHT LED TURN SIGNALS Now this is a really cool Bagger Nation® accessory! We start off with a sleek, fitted windshield trim. Then, we added a pair of the brightest LEDs that you’ve ever seen... What we end up with is a killer way to dress up your Road Glide AND completely hide your turn signals! The trim piece is so cool we sell it separately w/o the turn signals, but once you see these bad boys in action, you’ll want to hide your turn signals too! Hand assembled at the Bagger Nation® Factory and available in chrome or gloss black finishes. We recommend our Badlands Load Equalizer to regulate turn signal flashing speed. Part # RGWT-C / No LEDs - Chrome / Price: $129.95 Part # RGWT-B / No LEDs - Black / Price: $129.95 Part # RGWTLED-C / With LEDs - Chrome / Price: $285.00 Part # RGWTLED-B / With LEDs - Black / Price: $295.95

Shown: Black Road Glide

LIGHTS

Windshield trim with Super Bright LEDs

PAGE

103

602.840.4205 | BAGGERNATION.COM

SUPER BRIGHT LEDS

BADLANDS LOAD EQUALIZER

BAG LIGHT INSTALL KIT

Have you installed some killer Bagger Nation® LED turn signals to trick

Our Bag Light Install Kit will simplify the wiring your new Bag Lights! Just plug

You’ve seen these on our wildest custom Baggers, and in our Road Glide

out your Bagger? Of course you have! Well, we recommend you add the

in to your under-seat harness, run the wires down the bag supports, hook-up to

windshield trims. Now Bagger Nation offers our Super Bright LEDs in kit

Badlands Load Equalizer.

the taillight wires, and clip the plugs together! Boom! You’re ready to show-off

form so you can create your own custom look!

your new Bagger Nation® taillights! The Badlands Load Equalizer will regulate the flashing sequence at a

These insanely bright LEDs are easy to install...just drill a hole, silicon them

consistent rate.

This kit also allows for easy, one-plug bag removal when you are cleaning or

in place, and wire them up!

servicing your Bagger... One kit hooks up two saddlebag lights, one right & one Part # LE-03 / Load Equalizer Wire In Style / Price: $59.95

Available in red or amber.

left.

Part # LE-03-A / Load Equalizer 97 - Later / Price: $69.95

We recommend our Badlands Load Equalizer to regulate turn signal flash-

Part # LE-03-SR / Load Equalizer 2010 - Later FLHX / Price: $79.95

Part # BLIK / Bag Light Install Kit / Price: $59.95

Part # LE-03-SRCVO / Load Equalizer 2009 - Later CVO / Price: $83.95

Part # BLIK-10 / Bag Light Install Kit 2010-2013, SG, RG / Price: $59.95

ing speed.

Part # BLIK-CVO / Bag Light Install Kit - CVO / Price: $59.95 Part # BLIK-14 / Bag Light Install Kit 2014 SG, RG / Price: $95.95

Part # SBY / Pair of Amber LEDs / Price: $79.95

Part # BSM / Brake Light Strobing Module / Price: $38.95

LIGHTS

Part # SBR / Pair of Red LEDs / Price: $79.95

602.840.4205 | BAGGERNATION.COM

PAGE

104

PAGE

105

602.840.4205 | BAGGERNATION.COM

LAY’D OUT REAR AIR SUSPENSION

SUSPENSION

Over the years, we tried several different air suspension kits, but we never fell in love with any of them. Then, the guys who developed the Platinum “Bleed and Feed” technology created a system just for our Baggers, and we were blown away! Our Lay’d Out Rear Air Suspension Kit features a unique two-chamber air system that allows you to raise the bike with air, then apply pressure on top to control dampening for changing road and load conditions. Our exclusive air suspension is 12.5” extended and drops to 9.25” That’s over 3” of travel! Since Platinum was creating this exclusive kit for us, we had them setup the shocks to be lowest traveling shock on the market, so our Baggers could truly be Lay’d Out! All of this, coupled with the smoothest ride available, means our new air kits can’t be beat! It’s the baddest system we have ever tried and we now use it on all of our custom Baggers! Each Lay’d Out Rear Air Suspension Kit includes: A pair of Shocks, Switches, Wiring, Mount Brackets, Compressor and full instructions, and is available in Black or Chrome. Please note ABS or non-ABS when ordering.

SECTION

09 Part # SPBF-B / Signature Platinum Air Suspension - Black / Price: $1599.99 Part # SPBF-C / Signature Platinum Air Suspension - Chrome / Price: $1599.99

Showtime’s 2012 Bagger Nation Road Glide - Photo: Michael Lichter

PAGE

107

602.840.4205 | BAGGERNATION.COM

MONKEY BARS速, GUARD & APES Handlebar Measurement Information - Pages 110-111 OEM Monkey Bars (fits everything but batwing fairings) - Pages 112-113 Monkey Drag Bars (fits everything but batwing fairings) - Pages 114-115

SECTION

Monkey Bagger Bars (fit all batwing fairing models) - Pages 116-117 Classic Bagger Apes (fit all batwing models) - Pages 118-119 OEM Classic Bagger Apes (fit everything but batwing fairings) - Pages 120-121 Super Clamp 1 piece riser clamp - Page 122 Supersize Handlebar Install Kits - Page 122 Monkey Engine Guards - Pages 124-125

PAGE

109

602.840.4205 | BAGGERNATION.COM

MEASURE IT RIGHT

OEM MONKEY BARS®

MONKEY DRAG BARS®

10”

12”

14”

16”

W 33” / PB 6”

W 34” / PB 6”

W 35” / PB 6”

W 36” / PB 6”

6”

MONKEY BAGGER BARS®

CLASSIC BAGGER BARS

OEM CLASSIC BAGGER APES

8”

10”

12”

14”

16”

W 35” / PB 9”

10”

12”

14”

16”

W 35” / PB 6”

10”

12”

14”

16”

W 34” / PB 6”

W 35” / PB 6”

W 36” / PB 6”

W 37” / PB 6”

602.840.4205 | BAGGERNATION.COM

PAGE

110

“The Original Monkey Bars, often imitated, never duplicated.” - Roger Richardson PAGE

111

602.840.4205 | BAGGERNATION.COM

MONKEY BARS, GUARD & APES

W 33” / PB 9”

2014-2015 COMPATIBLE

OEM MONKEY BARS® If you’re a Road Glide or Road King freak, don’t feel left out... Bagger Nation® makes killer bars for your bike too! Paul wanted to lend all the chopper styling and attitude he could to the Road Glide / Road King platform. Paul grabbed a set of Original Monkey Bars®, widened them, added swoopy arches and unique, sexy points, and BOOM! Our OEM Monkey Bars® give your Bagger instant attitude adjustment! Designed for Road Glide and Road Kings, but they fit on just about any OEM model out there! OEM Monkey Bars® are available in both chrome or gloss black powdercoated finishes. Heights from 10”-16” are available. Each bar is pre-drilled, and Bagger Nation® works the inside of our bars so wires and cables pull through easily. They also work with the new Fly-

with a 6” pullback and a 1.25” bar diameter. Taller bars will naturally get wider.

Note: Custom heights available by special order. Note: Make sure to order a corresponding Supersize Kit. Note: If you are ordering for CVO models please call for special orders.

Shown:

Note: Bars fit Road Glide / Road King and all HD models 1986-2015, except Batwing Fairings.

10” Chrome OEM Monkey Bars

Part # OEM125-10C / OEM Monkey Bar Chrome 10” x 1 1/4” / $395.00 Part # OEM125-10B / OEM Monkey Bar Black 10” x 1 1/4” / $395.00 Part # OEM125-12C / OEM Monkey Bar Chrome 12” x 1 1/4” / $395.00 Part # OEM125-12B / OEM Monkey Bar Black 12” x 1 1/4” / $395.00 Part # OEM125-14C / OEM Monkey Bar Chrome 14” x 1 1/4” / $415.00 Part # OEM125-14B / OEM Monkey Bar Black 14” x 1 1/4” / $415.00 Part # OEM125-16C / OEM Monkey Bar Chrome 16” x 1 1/4” / $469.00 Part # OEM125-16B / OEM Monkey Bar Black 16” x 1 1/4” / $469.00 Part # OEM-Install / 10” OEM Monkey Install Kit / $27.95

602.840.4205 | BAGGERNATION.COM

PAGE

112

PAGE

113

602.840.4205 | BAGGERNATION.COM

MONKEY BARS, GUARD & APES

As an example, our most popular OEM Monkey Bar® size sits 10” high, measures 33” wide,

Made in the USA

By-Wire throttle system found on 2008 and later touring models.

MONKEY DRAG BARS® Bagger Nation® fans asked us for a low slung bar for their Road Glides and Road Kings, and they also wanted more pullback so they weren’t left stretching forward to reach traditional drag bars. So, we combined the classic style of our OEM Monkey Bars® with our signature tightly bent uprights with good pullback and BAM, the Monkey Drag Bar® is born! These high-style bars have tons of attitude and all the comfort that our original OEM Monkey Bars® are famous for. They feature the exact same natural hand position as our OEM bars, they are 33 inches wide, with a 6” rise and over 8” of pull back! So if it’s a low slung

1986-2015 except batwing fairing models and softail springer models. Fly-By Wire ready. 1.25” diameter bars step to 1” and grip and riser areas.

MONKEY BARS, GUARD & APES

Available in gloss black powder coat or beautifully chrome plated. Fit all OEM Harley models

Made in the USA

profile you crave, the New Monkey Drag Bars® deliver!

Part # OEMMDB-CHR/ OEM Monkey Drag Bar - Chrome / $395.00 Part # OEMMDB-BLK / OEM Monkey Drag Bar - Black / $395.00

Shown: Custom Painted Monkey Drag Bars

2014-2015 COMPATIBLE

602.840.4205 | BAGGERNATION.COM

PAGE

114

PAGE

115

602.840.4205 | BAGGERNATION.COM

MONKEY BAGGER BARS™ HOLY SHIT these bars are bitchin! When Paul began tricking out his Street Glide, he wanted to combine chopper styling and attitude with a unique handlebar that Bagger Nation® could

8” Now AVAILABLE

truly call its own... well, Paul nailed it with our Monkey Bagger Bars™.

Made in the USA

Part # MBB125-8C / Monkey Bagger Bar Chrome 8” x 1 1/4” / $395.00 Part # MBB125-8B / Monkey Bagger Bar Black 8” x 1 1/4” / $395.00 Part # MBB125-10C/ Monkey Bagger Bar Chrome 10” x 1 1/4” / $395.00 Part # MBB125-10B/ Monkey Bagger Bar Black 10” x 1 1/4” / $395.00 Part # MBB125-12C / Monkey Bagger Bar Chrome 12” x 1 1/4” / $395.00 Part # MBB125-12B / Monkey Bagger Bar Black 12” x 1 1/4” / $395.00 Part # MBB125-14C / Monkey Bagger Bar Chrome 14” x 1 1/4” / $415.00 Part # MBB125-14B / Monkey Bagger Bar Black 14” x 1 1/4” / $415.00 Part # MBB125-16C / Monkey Bagger Bar Chrome 16” x 1 1/4” / $469.00 Part # MBB125-16B / Monkey Bagger Bar Black 16” x 1 1/4” / $469.00

2014-2015 COMPATIBLE

602.840.4205 | BAGGERNATION.COM

PAGE

116

MONKEY BARS, GUARD & APES

Bars fit all touring models with bat wing fairings from 1986 thru 2015

Shown: 8” Black Monkey Bagger Bars

PAGE

117

602.840.4205 | BAGGERNATION.COM

CLASSIC BAGGER APES Nothing gives instant attitude to a Bagger like a fresh set of ape hangers! Baggers just look better with apes, so we created an affordable alternative for your Bagger. Classic Bagger Apes are available in both chrome or gloss black powdercoated finishes. Heights from 10”-16” are available. Each bar is mandrel bent from 1” seamless steel tubing, pre-drilled, and Bagger Nation® works the inside of our bars so wires and cables pull through easily. They also work with the new Fly-By-Wire throttle system found on 2008 and later touring models.

“These feel like Monkey Bagger Bars and they only cost $133.95.”

Note: Make sure to order a corresponding Supersize Kit.

Shown:

MONKEY BARS, GUARD & APES

Made in the USA

Part # BA-10-C / 10” Classic Bagger Apes - Chrome / $133.95 Part # BA-10-B / 10” Classic Bagger Apes - Black / $133.95 Part # BA-12-C / 12” Classic Bagger Apes - Chrome / $133.95 Part # BA-12-B / 12” Classic Bagger Apes - Black / $133.95 Part # BA-14-C / 14” Classic Bagger Apes - Chrome / $172.95 Part # BA-14-B / 14” Classic Bagger Apes - Black / $172.95 Part # BA-16-C / 16” Classic Bagger Apes - Chrome / $172.95 Part # BA-16-B / 16” Classic Bagger Apes - Black / $172.95

12” Chrome Classic Bagger Apes

2014-2015 COMPATIBLE

602.840.4205 | BAGGERNATION.COM

PAGE

118

PAGE

119

602.840.4205 | BAGGERNATION.COM

OEM CLASSIC BAGGER APES Bagger Nation® has had an overwhelming response to our Classic Bagger Apes for batwing fairing bikes, so we decided that Road Glide and Road King enthusiasts needed some love too! our NEW OEM Classic Bagger Apes provide all the comfort you’re looking for, as well as a Bagger Nation® attitude adjustment! These superior quality 1” DOM bars are available in heights 10”-16” and come in either chrome or gloss black finishes. These bars feature the identical geometry of our world

“These feel like OEM Monkey Bars and they only cost $133.95.”

Shown: 12” OEM Classic Bagger Apes

famous OEM Monkey Bars®, they are drilled for internal wiring, and notched for Fly-By-Wire.

Part # OEMH10-C / 10” OEM Classic Bagger Apes - Chrome / $133.95 Part # OEMH10-B / 10” OEM Classic Bagger Apes - Black / $133.95 Part # OEMH12-C / 12” OEM Classic Bagger Apes - Chrome / $133.95 Part # OEMH12-B / 12” OEM Classic Bagger Apes - Black / $133.95 Part # OEMH14-C / 14” OEM Classic Bagger Apes - Chrome / $172.95 Part # OEMH14-B / 14” OEM Classic Bagger Apes - Black / $172.95 Part # OEMH16-C / 16” OEM Classic Bagger Apes - Chrome / $172.95 Part # OEMH16-B / 16” OEM Classic Bagger Apes - Black / $172.95

MONKEY BARS, GUARD & APES

Our OEM Classic Bagger Apes are compatible with all models and years thru 2015.

2014-2015 COMPATIBLE

Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

120

PAGE

121

602.840.4205 | BAGGERNATION.COM

YOU NEED THIS! SUPER CLAMP 1 PIECE RISER CLAMP

SUPERSIZE KIT

Since we were designing a new riser clamp anyway, Paul decided to solve all the is-

Our Supersize Kits are the easiest way to ensure you’ve got everything needed to

sues* we have heard about with other bars and clamps. All 2007 and earlier HD tour-

install your new Bagger Nation® handlebars! We offer the kits in standard black or

ing models have a 2-piece top clamp system that we feel can create a safety problem

braided stainless, and for ABS equipped models! Supersize Kits vary in price de-

when handlebars are used with internal wiring. Our NEW Bagger Nation® Super

pending on style, finish and equipment. Custom finishes are available as well!

with poor knurling from slipping. Our Super Clamp has a large wire relief exit for bars

Each Bagger Nation® Supersize Kit includes: Clutch cable, throttle cables (if needed)

with internal wiring.

our pro-system brake line (if needed) wires, shrink, pull wire, instructions and gas-

MONKEY BARS, GUARD & APES

Clamp has bar-locking set screws built into the clamp that will prevent handlebars

kets. The contents of your Supersize Kit will vary by model, year and equipment. The Super Clamp is CNC machined from 6061-T6 aircraft aluminum, and is the highest quality, problem solving, bad-ass clamp available!

Due to the many variations and combinations Bagger Nation® offers in Supersize Kits, please call us to order. 602.840.4205

*When installing handlebars, Bagger Nation® STRONGLY recommends our 1-piece Super Clamp be used on 2007 and earlier HD touring models. Part # SRC / Super Clamp 1 Piece Ricer Clamp / $69.95

602.840.4205 | BAGGERNATION.COM

PAGE

122

PAGE

123

602.840.4205 | BAGGERNATION.COM

MONKEY ENGINE GUARDS MONKEY BARS, GUARD & APES

Paul’s Monkey Bars are the hottest Bagger bars available. Now you can continue that killer Monkey look with our Monkey Guards! Bagger Nation® Monkey Guards are ready to rock in either black or chrome and available for all models 1997-2015. Note: Bagger Nation® Monkey Guards are not compatible with HD leg guards. Part # MEG-08-C / Monkey Engine Guard - 97-2008 - Chrome / $399.95 Part # MEG-08-B / Monkey Engine Guard - 97-2008 - Black / $399.95 Part # MEG-09-C / Monkey Engine Guard - 09-2015 - Chrome / $399.95 Part # MEG-09-B / Monkey Engine Guard - 09-2015 - Black / $399.95

2014-2015 COMPATIBLE

Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

124

PAGE

125

602.840.4205 | BAGGERNATION.COM

WHEELS & YAXLES SECTION

Yaxle Custom Axles and End Caps - Pages 128-129

Speed Freak Wheels and Rotors - Pages 130-131 High Five Wheels and Rotors - Page 132 Hoopla Wheels and Rotors - Page 133 High Roller Wheels and Rotors - Page 134 Smoothie Rear Wheels - Page 135

PAGE

127

602.840.4205 | BAGGERNATION.COM

THE YAXLE 2014-2015 COMPATIBLE

The Yaxle is Paul’s new twist on the flush-mount axle! The Yaxle is the perfect way to make your stock fork look super sleek and custom! Our Yaxle and end caps are CNC machined from 6061-T6 aluminum and then flawlessly chrome plated or black anodized. The Yaxle is available in Speed Freak™, Yafterburner™, Domino, and Smooth styles. We offer The Yaxle in 25mm, 1”, or 3/4” axle sizes to fit all touring models 1986 through 2015

New New

Part # YAXLE08/SF / 25mm Yaxle Speed Freak - Touring Models 2008-2015 - Chrome / Price: $149.95 Part # YAXLE08/SFB / 25mm Yaxle Speed Freak - Touring Models 2008-2015 - Black / Price: $149.95 Part # YAXLE08/YC / 25mm Yaxle Yafterburner - Touring Models 2008-2015 - Chrome / Price: $149.95 Part # YAXLE08/YB / 25mm Yaxle Yafterburner - Touring Models 2008-2015 - Black / Price: $149.95 Part # YAXLE08/CDC / 25mm Yaxle Domino - Touring Models 2008-2015 - Chrome / Price: $149.95

Yafterburner

New

Part # YAXLE08/BDC / 25mm Yaxle Domino - Touring Models 2008-2015 - Black / Price: $149.95 Part # YAXLE08/PCC / 25mm Yaxle Smooth - Touring Models 2008-2015 - Chrome / Price: $149.95 Part # YAXLE08/PCB / 25mm Yaxle Smooth - Touring Models 2008-2015 - Black / Price: $149.95

New New Speed Freak™

Part # YAXLE/SF / 1” Yaxle Speed Freak - Chrome / Price: $149.95 Part # YAXLE/SFB / 1” Yaxle Speed Freak - Black / Price: $149.95 Part # YAXLE/YC / 1” Yaxle Yafterburner - Chrome / Price: $149.95 Part # YAXLE/YB / 1” Yaxle Yafterburner - Black / Price: $149.95 Part # YAXLE/CDC / 1” Yaxle Domino - Chrome / Price: $149.95 Part # YAXLE/BDC / 1” Yaxle Domino - Black / Price: $149.95 Part # YAXLE/PCC / 1” Yaxle Smooth - Chrome / Price: $149.95 Part # YAXLE/PCB / 1” Yaxle Smooth - Black / Price: $149.95

New

Smooth

Part # YAXLE99/SF / 3/4” Yaxle Speed Freak - Touring Models 1999-earlier - Chrome / Price: $149.95 Part # YAXLE99/SFB / 3/4” Yaxle Speed Freak - Touring Models 1999-earlier - Black / Price: $149.95 Part # YAXLE99/YC / 3/4” Yaxle Yafterburner - Touring Models 1999-earlier - Chrome / Price: $149.95 Part # YAXLE99/YB / 3/4” Yaxle Yafterburner - Touring Models 1999-earlier - Black / Price: $149.95 Part # YAXLE99/CDC / 3/4” Yaxle Domino - Touring Models 1999-earlier - Chrome / Price: $149.95 Part # YAXLE99/BDC / 3/4” Yaxle Domino - Touring Models 1999-earlier - Black / Price: $149.95 Part # YAXLE99/PCC / 3/4” Yaxle Smooth - Touring Models 1999-earlier - Chrome / Price: $149.95 Part # YAXLE99/PCB / 3/4” Yaxle Smooth - Touring Models 1999-earlier - Black / Price: $149.95

Domino

602.840.4205 | BAGGERNATION.COM

PAGE

128

PAGE

129

602.840.4205 | BAGGERNATION.COM

WHEELS & YAXLES

New

New SPEED FREAK™ WHEEL Our new Speed Freak wheel is one of our best yet! Our Speed Freak accessory styling has been so popular we knew we needed a matching wheel. So Paul narrowed our classic five spoke and added killer Speed Freak perforated pockets. Get yours today! Available in sizes 18” thru 30”. Matching rotors and pulleys available. Due to the many styles and sizes Bagger Nation® offers in wheel options, please call us to order. 602.840.4205

speed

WHEELS & YAXLES

freak

2014-2015 COMPATIBLE

Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

130

PAGE

131

602.840.4205 | BAGGERNATION.COM

11 2014-2015 COMPATIBLE

HOOPLA WHEEL Introducing The Hoopla, the latest wheel from Bagger Nation! This minimal, super-clean design screams custom! When you see them roll, you’ll know what the Hoopla is all about!

2014-2015 COMPATIBLE

WHEELS & YAXLES

Available in sizes 18” thru 30”. Matching rotors and pulleys available.

HIGH 5 WHEEL

Due to the many styles and sizes Bagger Nation offers in wheel

This timeless, stylish 5-spoke looks like it was poured rather than cut. Fluid lines with tons of attitude, the

options, please call us to order. 602.840.4205

High 5 is machined from solid billet forgings and then hand finished. Available in sizes 18” thru 30”. Matching rotors and pulleys available. Due to the many styles and sizes Bagger Nation offers in wheel options, please call us to order. 602.840.4205

602.840.4205 | BAGGERNATION.COM

PAGE

132

Made in the USA

Made in the USA PAGE

133

602.840.4205 | BAGGERNATION.COM

SMOOTHIE REAR WHEEL If you want Bagger Nation® style but the $ is a little tight, our Smoothie wheel is the answer! Paul had our Smoothie specially made to match our selection of front wheel styles! The idea is pick out your favorite front wheel style and a set of matching rotors. Then use our less expensive Smoothie wheel on the rear with your stock rotor and pulley! You only see the bottom of the rear wheel anyway since it’s behind the saddlebags. You get the great looks of a custom rim and a $200 tire, but you’ll save yourself about $1350 on a killer set of our latest styles! Available in chrome or black and w/ machined edge.

2014-2015 COMPATIBLE

Available in sizes 16” thru 18”. Matching rotors and pulleys available. Due to the many styles and sizes Bagger Nation® offers in wheel options, please call us to order. 602.840.4205

HIGH ROLLER WHEEL The classic, 5-spoke hot-rod styling of our High Roller wheel makes your ride look like it’s running 100 even when it’s sitting still! Forged billet construction available in black anodized w/ machined accents or brilliantly chrome plated. Available in sizes 18” thru 30”. Matching rotors and pulleys available. Due to the many styles and sizes Bagger Nation® offers in wheel options,

WHEELS & YAXLES

please call us to order. 602.840.4205

2014-2015 COMPATIBLE

Made in the USA

602.840.4205 | BAGGERNATION.COM

Made in the USA PAGE

134

PAGE

135

602.840.4205 | BAGGERNATION.COM

SECTION

12 FOOT BOARDS, MIRRORS, YAFTERBURNER & ACCESSORIES Speed Freak, Yafterburner and Wedgy Shift Linkages - Pages 138-139

2014 / 15 Speed Freak and Yafterburner Ignition Switch Covers - Pages 161

Classic Wedgy Footboards - Page 140

Speed Freak and Yafterburner Slider Covers - Pages 162-163

Super Bling Wedgy Foot Boards - Page 141

Slider Cover Spacers - Page 163

Classic and Super Bling Wedgy Passenger Foot Boards - Pages 142-143

Speed Freak and Yafterburner Extended Slider Covers - Pages 164-165

Classic and Super Bling Wedgy Passenger Foot Pegs - Page 144

Speed Freak and Yafterburner Saddlebag Latches - Pages 166-167

Classic and Super Bling Wedgy Shift Pegs - Page 145

Speed Freak and Yafterburner Accessories for 2014 / 15 models - Pages 168

Classic and Super Bling Wedgy Brake Pedals - Pages 146--147

Bagger Nation Logo Points Covers - Page 169

Bagger Nation Racing Levers - Pages 148-149

2â&#x20AC;? Lowered Kickstands and Kickstand Heel Catch Extension - Page 169

Speed Freak Grips and Stash Tube - Pages 150-151

Speed Freak and Yafterburner Brake Arm Covers - Pages 170-171

Yafterburner Grips and Stash Tube - Pages 152-153

Bagga Chip Mirror Hole Covers for Street Glides - Page 172

Bullet Grips and Stash Tube - Pages 154-155

Shift Arm Heel Lever Eliminators - Page 173

Stash Tube for Bagger Nation Grips - Pages 156-157

Speed Freak, Yafterburner and Domino Turn Signal Eliminators for Street Glides - Pages 174-175

Speed Freak, Yafterburner and Bullet Shift Pegs - Page 158

Turn Signal Eliminators for Road Glides - Pages 176-177

Speed Freak, Yafterburner and Bullet Passenger Pegs - Page 159

Bagger Nation Power Mirrors - Pages 178-179

Speed Freak and Yafterburner Ignition Switch Covers - Pages 160

Bagger Nation Double Trouble Mirrors - Pages 180-181

PAGE

137

602.840.4205 | BAGGERNATION.COM

WEDGY SHIFT LINKAGE

Wedgy Link

speed

WOW! These new shift linkages are truly BADASS! Paul wanted to

freak

the bill. Each link is machined from 6061-T6 aluminum and then

expand his ever popular Wedgy product line and the shift linkage fit beautifully chrome plated or black anodized and accent cut. They are a simple bolt-on installation and all needed hardware is included. Check out all 3 new Wedgy link styles...one is sure to fit your style! Part # LINK-Wedgy / Wedgy Link - Chrome / Price: $175.95 Part # LINK-Wedgy-B / Wedgy Link - Black / Price: $175.95

Shown:

Part # LINK-SF-CH / Speed Freak Link - Chrome / Price: $201.99

Speed Freak™ Link

Part # LINK-SF-BK / Speed Freak Link - Black / Price: $201.99

2007 Road Glide

Part # LINK-YB-CH / Yafterburner Link - Chrome / Price: $179.95

with Black Speed Freak™

Part # LINK-YB-BK / Yafterburner Link - Black / Price: $179.95

Shift Linkage

Yafterburner Link

602.840.4205 | BAGGERNATION.COM

PAGE

138

PAGE

139

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

WEDGY FOOT BOARDS Our Classic Wedgy Foot Boards are BADASS! Paul’s been dreaming up products like this since he designed the Power Mirrors on “Sliver”, the industry defining 1999 Oakland Roadster Show Champion. Our Classic Wedgy Foot Boards are CNC machined from 6061-T6 aluminum and beautifully chrome plated or black powdercoated. Our foot boards are a direct bolt-on application to all HD models equipped with OEM floor boards. Our Classic Wedgy design is so stylish that Paul created a

SUPER BLING

wide selection of Classic Wedgy accessories for your Bagger. What’s new? Be sure to check out our NEW Super Bling Wedgy products! We removed the rubber inserts and machined a brilliant diamond pattern right into the aluminium. This adds a whole new level of sparkling detail to our

CLASSIC WEDGY

Wedgy series, which includes floor boards, passenger foot boards and pegs, shift pegs and brake pedals. Part # WFB / Wedgy Foot Boards - Chrome / Price: $399.00 Part # WFB-B / Wedgy Foot Boards - Black / Price: $399.00 Part # WFBSB-CH / Wedgy Foot Boards - Super Bling - Chrome / Price: $499.95 Part # WFBSB-B / Wedgy Foot Boards - Super Bling - Black / Price: $499.95

602.840.4205 | BAGGERNATION.COM

PAGE

140

PAGE

141

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

New

WEDGY PASSENGER FOOT BOARDS Check out our Classic Wedgy Passenger Foot Boards! Simply pop-off your stock passenger foot boards and our Wedgy Passenger Foot Boards bolt directly to the factory mount! Beautifully machined from 6061-T6 aluminum. Hardware is included, and are available in chrome or

Our Classic Wedgy design is so stylish that Paul created a wide selection of Classic Wedgy accessories

CLASSIC WEDGY

for your Bagger! Be sure to check out our NEW Super Bling Wedgy products! Part # WPFSB-CH / Wedgy Passenger Foot Boards - Super Bling - Chrome / Price: $359.95 Part # WPFSB-BK / Wedgy Passenger Foot Boards - Super Bling - Black / Price: $359.95 Part # WPF-C / Wedgy Passenger Foot Boards - Chrome / Price: $284.95 Part # WPF-B / Wedgy Passenger Foot Boards - Black / Price: $284.95

New Shown: Classic Wedgy Foot Board and Passenger Board

SUPER BLING

PAGE

143

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

gloss black powder coat.

WEDGY PASSENGER PEGS

WEDGY SHIFT PEG

Our Classic Wedgy Passenger Pegs are the perfect compliment to our popular Classic

Now, even your shift pegs can be Wedgy styled! Bagger Nation速 Classic Wedgy Shift Pegs are a

Wedgy Floorboards! They are a direct replacement for Street Glide or Road Glide custom

direct bolt-on replacement for stock pegs. Each Wedgy Shift Peg is beautifully machined from

stock pegs. Simply remove the factory peg body and our Classic Wedgy Pegs slip right on!

6061-T6 aluminum and then flawlessly chrome plated or gloss black powdercoated!

Our Classic Wedgy Passenger Pegs are expertly machined from 6061-T6 Aluminum, and

Our Classic Wedgy design is so stylish that Paul created a wide selection of Classic Wedgy accesShown:

Our Classic Wedgy design is so stylish that Paul created a wide selection of Classic Wedgy accessories for your Bagger!

Super Bling Foot Boards, Passenger & Shift Pegs

sories for your Bagger! Be sure to check out our NEW Super Bling Wedgy products! Part # WSPSB-CH / Wedgy Shift Peg - Super Bling - Chrome / Price: $77.95 Part # WSPSB-BK / Wedgy Shift Peg - Super Bling - Black / Price: $77.95

Be sure to check out our NEW Super Bling Wedgy products!

Part # WSP-CH / Wedgy Shift Peg - Chrome / Price: $69.99 Part # WPPSB-CH / Wedgy Passenger Peg - Super Bling - Chrome / Price: $265.95

Part # WSP-BK / Wedgy Shift Peg - Black / Price: $69.99

Part # WPPSB-BK / Wedgy Passenger Peg - Super Bling - Black / Price: $265.95 Part # WPP-C / Wedgy Passenger Peg - Chrome / Price: $23495 Part # WPP-B / Wedgy Passenger Peg - Black / Price: $234.95

CLASSIC WEDGY

New

Shown:

New

Super Bling Shift Peg

SUPER BLING

SUPER BLING PAGE

145

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

available in chrome or gloss black powder coat.

CLASSIC WEDGY

WEDGY & OVAL BRAKE PEDAL If you dig our Classic Wedgy Foot Boards, you’re going love the matching Classic Wedgy Brake Pedal! Super sleek, and it bolts directly to your stock brake arm with one cut. Don’t like the points? We also have an Oval Brake Pedal. This nifty little brake pedal looks great on all Baggers, or as a compliment to our Wedgy or Banana Footboards. Both the Wedgy and the Oval are expertly machined from 6061 T-6 aluminum and beautifully chrome plated or black anodized. Simple installation instructions and all hardware is included. Our Classic Wedgy design is so stylish that Paul created a wide selection of Classic Wedgy accessories for your Bagger!

Part # WBPSB-CH / Wedgy Brake Pedal - Super Bling - Chrome / Price: $108.95 Part # WBPSB-BK / Wedgy Brake Pedal - Super Bling - Black / Price: $108.95 Part # WBP / Wedgy Brake Pedal - Chrome / Price: $98.95 Part # WBP-B / Wedgy Brake Pedal - Black / Price: $98.95 Part # OBPSB-CH / Oval Brake Pedal - Super Bling - Chrome / Price: $108.95 Part # OBPSB-BK / Oval Brake Pedal - Super Bling - Black / Price: $108.95 Part # OBP / Oval Brake Pedal - Chrome / Price: $98.95 Part # OBP-B / Oval Brake Pedal - Black / Price: $98.95

SUPER BLING WEDGY & OVAL

Shown: Super Bling Foot Boards with Super Bling

CLASSIC WEDGY & OVAL

New

Brake Pedal

602.840.4205 | BAGGERNATION.COM

PAGE

146

PAGE

147

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

Be sure to check out our NEW Super Bling Wedgy products!

BAGGER NATION® RACING LEVERS FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

In our never ending pursuit of speed, Bagger Nation commissioned an independent aeronautic laboratory to determine wind drag on stock HD hand levers vs Paul’s 40% lighter, graduated-hole style lever. Well, the data was astounding! Paul’s new lever design not only increased stopping power by an amazing 20%, they also added 10mph to his top speed! OK, that’s a bunch of bullshit, but these are the coolest levers we’ve seen! Our Bagger Nation® Racing Levers are hand-crafted then flawlessly chrome plated or black powdercoated and machine accented to match factory controls. For 2008-2013 and later models. Part # RL08 / Racing Levers 2008-2013 - Chrome / Price: $149.95 Part # RL08-BLK / Racing Levers 2008-2013 - Black / Price: $149.95

Shown: Racing Levers, Power Mirrors, Yafterburner Grips on 10” OEM Monkey Bars

PAGE

149

602.840.4205 | BAGGERNATION.COM

freak

New FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

speed

SPEED FREAK™ GRIPS These stylish grips are a perfect addition to our ever expanding line of products. Our Speed Freak™ Grips are CNC machined from T-6061 aircraft aluminum, and they work great on all Fly-By-Wire models. The clutch side grip has our exclusive hidden double mounting system, which makes them safe and clean. Our Grips also feature a unique removable left side end cap that allows use of our exclusive “Stash Tube” sold separately… Get your Stash Tube on page 156 Available in Chrome or Black accent finishes. Don’t forget to add a Stash Tube to your grip order! Part # SFG-C / Speed Freak Grips - Chrome FBW / Price: $169.95 Part # SFG-BLK / Speed Freak Grips - Black FBW / Price: $149.95 Part # SFG7-C / Speed Freak Grips - Chrome 07-Earlier / Price: $169.95 Part # SFGB7 / Speed Freak Grips - Black 07-Earlier / Price: $169.95 Part # STASH-TUBE / Stash Tube / Price $9.99

GRIP STASH TUBE See Page 156

602.840.4205 | BAGGERNATION.COM

PAGE

150

PAGE

151

602.840.4205 | BAGGERNATION.COM

YAFTERBURNER™ GRIPS

New FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

These stylish grips are a perfect addition to our ever expanding line of products. Our Yafterburner™ Grips are CNC machined from T-6061 aircraft aluminum, and they work great on all Fly-By-Wire models. The clutch side grip has our exclusive hidden double mounting system, which makes them safe and clean. Our Grips also feature a unique removable left side end cap that allows use of our exclusive “Stash Tube” sold separately… Get your Stash Tube on page 156 Available in Chrome or Black accent finishes. Don’t forget to add a Stash Tube to your grip order! Part # YG / Yafterburner Grips - Chrome FBW / Price: $169.95 Part # YGB / Yafterburner Grips - Black FBW / Price: $169.95 Part # YG7 / Yafterburner Grips - Chrome - 07-Earlier / Price: $169.95 Part # YGB7 / Yafterburner Grips - Bullet - 07-Earlier / Price: $169.95 Part # STASH-TUBE / Stash Tube / Price $9.99

GRIP STASH TUBE See Page 156

602.840.4205 | BAGGERNATION.COM

PAGE

152

PAGE

153

602.840.4205 | BAGGERNATION.COM

New FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

BULLET GRIPS These stylish grips are a perfect addition to our ever expanding line of products. Our Bullet Grips are CNC machined from T-6061 aircraft aluminum, and they work great on all Fly-By-Wire models. The clutch side grip has our exclusive hidden double mounting system, which makes them safe and clean. Our Grips also feature a unique removable left side end cap that allows use of our exclusive “Stash Tube” sold separately… Get your Stash Tube on page 156 Available in Chrome or Black accent finishes. Don’t forget to add a Stash Tube to your grip order! Part # BG / Bullet Grips - Chrome FBW / Price: $169.95 Part # BGB / Bullet Grips - Black FBW / Price: $169.95 Part # BG7 / Bullet Grips - Chrome - 07-Earlier / Price: $169.95 Part # BGB7 / Bullet Grips - Bullet - 07-Earlier / Price: $169.95 Part # STASH-TUBE / Stash Tube / Price $9.99

GRIP STASH TUBE See Page 156

602.840.4205 | BAGGERNATION.COM

PAGE

154

PAGE

155

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

New

GRIP STASH TUBE Ever wish you had a secret place to stash stuff? Try our exclusive Grip Stash Tube that works with all of our Bagger Nation速 grip styles! Our Grip Stash Tube slides discretely into the left side handlebar on all custom and OEM HD model bars. Our end caps are threaded and unscrew to allow easy access to your secret stash. Part # STASH-TUBE / Stash Tube / Price: $9.99

I put ________________________ in my Grip Stash Tube.

602.840.4205 | BAGGERNATION.COM

PAGE

156

PAGE

157

602.840.4205 | BAGGERNATION.COM

speed

New speed

freak

BAGGER NATION® SHIFT PEGS

BAGGER NATION® PASSENGER PEGS

Our NEW Bagger Nation® grip styles are so awesome, we now offer matching shift

Our grip styles are so awesome, we now offer matching foot pegs! The

pegs! Bagger Nation Shift Pegs come in all three looks- the Speed Freak™, the

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

New

Bagger Nation® Passenger Pegs come in all three looks- the Speed Freak™, the

Yafterburner™, and the Bullet styles. Each set of pegs are a direct bolt on OEM

Yafterburner™, and the Bullet, and match our grip styles perfectly. CNC ma-

replacement and are CNC machined from 6061-T6 Aluminum.

chined from 6061-T6 aluminum, our pegs are a direct bolt-on OEM replacement for your factory pegs.

Available in brilliant chrome or black accent finishes and match our grip styles perfectly! Sold individually.

Available in brilliant chrome or black accent finishes.

Part # SPB-C / Shift Peg Bullet - Chrome / Price: $39.95

Part # PPB-C / Passenger Pegs - Bullet - Chrome / Price: $115.95

Part # SPB-B / Shift Peg Bullet - Black / Price: $39.95

Part # PPB-BK / Passenger Pegs - Bullet - Black / Price: $115.95

Part # SPSF-C / Shift Peg Speed Freak - Chrome / Price: $39.95

Part # PPSF-C / Passenger Pegs - Speed Freak - Chrome / Price: $115.95

Part # SPSF-B / Shift Peg Speed Freak - Black / Price: $39.95

Part # PPSF-BK / Passenger Pegs - Speed Freak - Black / Price: $115.95

Part # SPYB-C / Shift Peg Yafterburner - Chrome / Price: $39.95

Part # PPYB-C / Passenger Pegs - Yafterburner - Chrome / Price: $115.95

Part # SPYB-B / Shift Peg Yafterburner - Black / Price: $39.95

Part # PPYB-B / Passenger Pegs - Yafterburner - Black / Price: $115.95

SOLD IN PAIRS

602.840.4205 | BAGGERNATION.COM

PAGE

158

PAGE

159

602.840.4205 | BAGGERNATION.COM

speed

freak

New

freak

2006-2013

IGNITION SWITCH COVERS 2013 - EARLIER Paul continues to create innovative products to stylize your Bagger! Our NEW Bagger Nation®

2014-2015 COMPATIBLE

Ignition Switch Covers are machined from a solid block of 6061-T6 aluminum, then beautifully chrome plated or black anodized. Available in the Speed Freak™ style, or the accent-cut Yafterburner™ style.

2014/2015 IGNITION SWITCH COVERS

Part # SFIC-CH / Speed Freak Ignition Switch Cover - 2006-2013 - Chrome / Price: $113.95

The all-new 2014/15 HD touring models created an awesome opportunity for us to create some

Part # SFIC-BLACK / Speed Freak Ignition Switch Cover - 2006-2013 - Black / Price: $113.95

super cool billet pieces. One of those new designs is our all new 2014/15 ignition switch covers. We

Part # YIC-C / Yafterburner Ignition Switch Cover - 2006-2013 - Chrome / Price: $99.95

offer our ignition switch covers in 2 awesome styles, Speed Freak™ and Yafterburner. Both styles

Part # YIC-B / Yafterburner Ignition Switch Cover - 2006-2013 - Black / Price: $99.95

are available beautifully chrome plated or black anodized and accent cut. Each ignition switch

Part # YIC-05 / Yafterburner Ignition Switch Cover - 2005 & Earlier - Chrome / Price: $99.95

cover is CNC machined from 6061-T6 aluminum. They are a direct snap-on replacement part and

Part # YIC-05 / Yafterburner Ignition Switch Cover - 2005 & Earlier - Black / Price: $99.95

installation is simple. Sold individually. You can also add our Bagger Nation (BN) logo to your ignition switch cover if you prefer. We think it looks killer machined onto the face but we’ll let you be the judge.

Yafterburner Ignition Switch Cover

Part # SFIC-2014-B / Speed Freak Ignition Switch Cover - Black / Price $111.95 Part # SFIC-2014-C / Speed Freak Ignition Switch Cover - Chrome / Price $111.95 Part # YIC-2014-B / Yafterburner Ignition Switch Cover - Black / Price $111.95 Part # YIC-2014-C / Yafterburner Ignition Switch Cover - Chrome / Price $111.95 Part # SFIC-14-LOGO-B / Speak Freak Ignition Switch Cover, w/ Logo - Black / Price $111.95 Part # SFIC-14-LOGO-C / Speak Freak Ignition Switch Cover, w/ Logo - Chrome / Price $111.95

2006-2013 602.840.4205 | BAGGERNATION.COM

PAGE

160

PAGE

161

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

New

speed

FORK SLIDER COVERS 1986-2015 WOW! Check out our BADASS Fork Slider Covers! These will allow you to continue

New

Paul’s Speed Freak™ or Yafterburner™ styling down your forks, and you’ll have the most radical looking front end in town! This is an simple, bolt on product that will dramatically change the look of your Bagger!

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

Machined from 6061-T6 aluminum, then beautifully chrome plated or black anodized. Part # SFSC-CHROME / Speed Freak Slider Cover - Chrome / Price: $431.95 Part # SFSC-BLACK / Speed Freak Slider Cover - Black / Price: $431.95 Part # YSC-C / Yafterburner Fork Cover - Chrome / Price: $399.95 Part # YSC-B / Yafterburner Fork Cover - Black / Price: $399.95 Part # SCAK / Slider Cover Adapter Kit - 2014-2015 Slider Covers / Price: $2.95

2014-2015 COMPATIBLE

SLIDER COVER SPACERS If you’re raking your Bagger and have extended the fork tubes, you’ll have a gap between the slider covers and the lowers. The Bagger Nation® Slider Cover Spacers will solve that issue pronto! Our spacers are a perfect profile match for our Yafterburner Slider Covers! Slider Cover Spacers are machined from 6061 T-6 aluminum, 1” thick and available in both Black anodize or Chrome finishes.

speed

Part # SCS / Slider Cover Spacers 1” Chrome / Price: $99.99

freak

Part # SCS-B / Slider Cover Spacers 1” Black / Price: $99.99

Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

162

PAGE

163

602.840.4205 | BAGGERNATION.COM

New

EXTENDED FORK SLIDER COVERS 1986-2015 WOW! Everybody already digs the original Bagger Nation® Fork Slider Covers! Well, Paul decided bigger IS better and we extended these babies! Continue Paul’s Yafterburner™ styling down your forks, and you’ll have the most radical looking front end in town! Our NEW Extended Length Slider Covers are 8.25” long as opposed to our standard 6.25” model. This is an simple, bolt on product that will dramatically change the look of your Bagger! Machined from 6061-T6 aluminum, then beautifully chrome plated or black anodized.

2014-2015 COMPATIBLE

speed

Part # SC-YB-EXT-CHR / Yafterburner Extended Slider Cover - Chrome / Price: $549.95

freak

Shown:

Part # SC-YB-EXT-BLK / Yafterburner Extended Slider Cover - Black / Price: $549.95 Part # SC-SF-EXT-CHR / Speed Freak Extended Slider Cover - Chrome / Price: $549.95

Chrome Yafterburner

Part # SC-SF-EXT-BLK / Speed Freak Extended Slider Cover - Black / Price: $549.95

Extended Fork Slider

Part # SCAK / Slider Cover Adapter Kit - 2014-2015 Slider Covers / Price: $2.95

Covers

Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

164

PAGE

165

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

New

SADDLEBAG LATCHES Need to spice-up your factory saddlebag latches with something cool? Our Bagger Nation® Saddlebag Latch Covers add serious flavor to your Bagger! Of course, we hid the mounting hardware for that clean Bagger Nation® look!

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

Available in both the Speed Freak™ and Yafterburner™ styles. CNC machined from 6061-T6 aircraft aluminum and then beautifully chrome plated or black anodized. No modifications required, direct bolt-on application. Part # SFSBL-CH / Speed Freak Saddlebag Latches - Chrome / Price: $276.95 Part # SFSBL-BK / Speed Freak Saddlebag Latches - Black / Price: $276.95 Part # YSBL-CH / Yafterburner Saddlebag Latches - Chrome / Price: $228.95 Part # YSBL-B / Yafterburner Saddlebag Latches - Black / Price: $228.95

speed

freak

New

2006-2013 1992-2013

Made in the USA

Made in the USA PAGE

167

602.840.4205 | BAGGERNATION.COM

12 Yafterburner Lid Lifters

Speed Freak Lid Lifters

Race Lid Lifters

speed

The motor company has made some exciting changes to the 2014/15 touring

2” LOWERED KICKSTAND

freak

models. One of those additions is one finger opening saddlebag lids. All you do is lift a little lever on the bag lid and voilà, your bag is open. Once we saw this killer

So you slammed your Bagger, now it doesn’t lean over enough on the factory

innovation we knew it was the perfect place to add some Yaffe style! Introducing the

kickstand... The Bagger Nation® 2” Lowered Kickstand solves this issue, and

Bagger Nation “Lid Lifters™. We have lent our classic styling cues to the bag opening

allows your Bagger to lean correctly when parked!

New

levers and holy smokes do they look trick! We offer our Lid Lifters™ in 3 awesome styles, Race, Speed Freak™ and Yafterburner. All 3 styles are available beautifully chrome plated or black anodized and accent cut. Each Lid Lifter ™ set is

Finished in chrome and is a direct bolt-on OEM replacement. Part # LK / 2’ Lowered Kickstand / Price: $215.00

CNC machined from 6061-T6 aluminum. Our included, innovative installation cams are patent pending. Lid Lifters ™ are sold in pairs and all needed hardware and instructions are included. Simple bolt-on installation. 2014-2015 COMPATIBLE

Part # LLRC-2014-BLK / Race Lid Lifter™ - Black / Price $159.95 Part # LLRC-2014-CHR / Race Lid Lifter™ - Chrome / Price $159.95 Part # LLSF-2014-BLK / Speed Freak™ Lid Lifter™ - Black / Price $159.95 Part # LLSF-2014-CHR / Speed Freak™ Lid Lifter™ - Chrome / Price $159.95

KICKSTAND HEEL CATCH EXTENSION

New

Part # LLYB-2014-BLK / Yafterburner Lid Lifter™ - Black / Price $159.95 Part # LLYB-2014-CHR / Yafterburner Lid Lifter™ - Chrome / Price $159.95

Having a hard time reaching your kickstand? The Bagger Nation® Kickstand Extension allows easy kickstand access when our full length Wedgy Foot

This goes here!

New

2014/2015 SADDLEBAG HINGE COVERS The all-new 2014/15 saddlebag design created an awesome opportunity for us to create some super cool billet pieces. One of those new designs is our all new 2014/15 saddlebag hinge cover

Boards are installed. Machined from a stainless steel, then beautifully polished. Fits models 1986 to present, and installs in seconds! Part # KSE / Kickstand Heel Catch Extension / Price: $49.99

2014-2015 COMPATIBLE

sets. We offer our saddlebag hinge covers in 2 awesome styles, Speed Freak™ and Yafterburner. Both styles are available beautifully chrome plated or black anodized and accent cut. Each hinge cover set is CNC machined from 6061-T6 aluminum. They are a direct bolt-on replacement part and installation is simple. Sold in pairs.

BAGGER NATION® POINTS COVER

Part #SBHC-2014-SF-B / Speed Freak™ Saddlebag Hinge Covers - Black / Price $299.95

Let everyone know that your Bagger is the coolest by sporting our Bagger Nation®

Part #SBHC-2014-SF-C / Speed Freak™ Saddlebag Hinge Covers - Chrome/ Price $299.95

Logo Points Cover! Our cover features a 2-piece design, with no visible hardware

Part #SBHC-2014-YB-B / Yafterburner Saddlebag Hinge Covers - Black / Price $299.95

for a super clean look!

Part #SBHC-2014-YB-C / Yafterburner Saddlebag Hinge Covers - Chrome/ Price $299.95

speed

freak

CNC machined from 6061-T6 aluminum, in chrome or black. Part # BNPC / Bagger Nation Logo Points Cover - Chrome / Price: $79.95

2014-2015 COMPATIBLE

Made in the USA 2014-2015 COMPATIBLE

Part # BNPC-BLACK / Bagger Nation Logo Points Cover - Black / Price: $79.95

Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

168

PAGE

169

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

2014/2015 SADDLEBAG LID LIFTERS™

BAGGER NATION® BRAKE LEVER COVER 2002-2013 In our never ending quest to bring you the coolest billet accessories, Bagger Nation® offers these super-cool, easy-to-install brake lever covers! Our Brake Lever Covers are CNC machined from 6061-T6 aluminum, and fit precisely over your boring, stock, stamped-steel brake arm. Installs in seconds!

accent-cut details. Check out all our Yafterburner™ and Speed Freak™ accessories to give your Bagger the Yaffe look! Part # SFBC-CHROME / Speed Freak Brake Lever Cover - Chrome / Price: $144.99 Part # SFBC-BLACK / Speed Freak Brake Lever Cover - Black / Price: $149.99 Part # YBBC-CHROME / Yafterburner Brake Lever Cover - Chrome / Price: $144.99

New

Part # YBBC-BLACK / Yafterburner Brake Lever Cover - Black / Price: $144.99 Part # WFB-SPACER / Wedgy Foot Board Spacer / Price: $10.95

speed

freak

Note: When using with our

Shown:

Wedy Foot Boards you

Chrome Yafterburner

will need a Wedgy Foot

Brake Lever Cover,

Board Spacer.

Classic Wedgy Brake Pedal, Classic Wedgy Foot Board, Bagger Nation Points Cover Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

170

PAGE

171

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

We offer our covers in the popular Yafterburner™ style, or our latest addition, the Speed Freak™ style. Available in flawless chrome, or black with

HEEL LEVER ELIMINATOR

BAGGA CHIPS If you want to change the fairing mounted mirrors on your Street Glide, the

2014-2015 COMPATIBLE

Many riders don’t like the rear-heel shift lever that comes stock on HD touring models or Softails with factory floorboards. When you remove the lever it

solution is here! Simply use a set of our Bagga Chips to cover the holes left in

leaves unattractive, exposed splines.

your inner fairing and add some cool style to your Bagger!

Paul designed this neat, billet adapter that allows you to remove the unwanted

Each set is machined from 6061-T6 aluminum and available in chrome or

lever, scoot the front lever out to the end of the shaft, and the Bagger Nation™

black accent finishes. Hardware and installation instructions included.

Heel Lever Eliminator will fill the space!

Part # BC-CH / Bagga Chips - Chrome / Price: $98.95

Machined from 6061-T6 aluminum, then beautifully chrome plated.

Part # BC-BLK / Bagga Chips - Black / Price: $98.95

Part # HLE-C / Heel Lever Eliminator - Chrome / Price: $39.95 Part # HLE-B / Heel Lever Eliminator - Black / Price: $39.95

Made in the USA

602.840.4205 | BAGGERNATION.COM

Made in the USA PAGE

173

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

New

Shown: Chrome Yafterburner Turn Signal Eliminator, Yafterburner Fork Slider

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

TURN SIGNAL ELIMINATORS FOR STREET GLIDES

Cover

When customizing a Street Glide, one of the first things Paul does is remove the stock turn signals. Well, that leaves ugly holes in the fairing... so Paul created these Bitchin Turn Signal Eliminators for Street Glides! Choose Speed Freak™, Yafterburner™, or Domino style. Machined from 6061-T6 aluminum, then beautifully chrome plated or black anodized. Each Bitchin Street Glide Turn Signal Eliminator includes: (2) covers, hardware, and instructions. Part # SF-TSE-C / Speed Freak Turn Signal Eliminators - Chrome / Price: $132.99 Part # SF-TSE-B / Speed Freak Turn Signal Eliminators - Black / Price: $132.99 Part # YB-TSE-C / Yafterburner Turn Signal Eliminators - Chrome / Price: $84.95 Part # YB-TSE-B / Yafterburner Turn Signal Eliminators - Black / Price: $84.95 Part # SGTSE-C / Domino Turn Signal Eliminators - Chrome / Price: $84.95 Part # SGTSE-B / Domino Turn Signal Eliminators - Black / Price: $84.95

speed

freak

2014-2015 COMPATIBLE

Made in the USA

602.840.4205 | BAGGERNATION.COM

PAGE

174

PAGE

175

602.840.4205 | BAGGERNATION.COM

TURN SIGNAL ELIMINATORS FOR ROAD GLIDES When customizing a Road Glide, one of the first things Paul does is remove the stock turn signals. Well, that leaves ugly holes in the fairing... so Paul created these Bitchin Turn Signal Eliminators for Road Glides! Machined from 6061-T6 aluminum, then beautifully chrome plated or black anodized. Each Bitchin Turn Signal Eliminator Kit includes: (2) covers, hardware and instructions.

Shown: Chrome Turn Signal

Part # RGBTSE-C / Road Glide Turn Signal Eliminators - Chrome / Price: $69.95

Eliminator, Monkey

Part # RGBTSE-B / Road Glide Turn Signal Eliminators - Black / Price: $69.95

Fairing Support Bar, Speed Freak Fork Slider Cover

Made in the USA PAGE

177

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

lifetime warranty

Shown: Chrome Power Mirror, Racing Lever, Speed

POWER MIRRORS This awesome mirror was created exclusively for Paul’s 1999 Oakland Roadster Show Champion, “Sliver”. Now our Wedgy style mirror is available for your Bagger! Complete the look with our Wedgy Bag Lights, Wedgy Foot Boards and accessories! Machined from 6061-T6 aluminum, then beautifully chrome plated. Includes 2 mirrors, 2 arms, hardware. Part # PMP / Power Mirror Pair - Chrome / Price: $239.00

2014-2015 COMPATIBLE

Part # PMP-B / Power Mirror Pair - Black / Price: $239.00

602.840.4205 | BAGGERNATION.COM

PAGE

178

PAGE

179

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

Freak Grip

DOUBLE TROUBLE MIRRORS The latest mirror design from Paul is the uniquely styled Double Trouble mirror set. A contemporary profile mixed with nostalgic, graduated holes make these mirrors incredibly versatile for any Bagger. Machined from 6061-T6 aluminum, then beautifully chrome plated. Includes 2 mirrors, 2 arms, hardware. Part # DTMP / Double Trouble Mirror Pair - Chrome / Price: $239.00 Part # DTMP-B / Double Trouble Mirror Pair - Black / Price: $239.00

602.840.4205 | BAGGERNATION.COM

PAGE

180

PAGE

181

2014-2015 COMPATIBLE

602.840.4205 | BAGGERNATION.COM

FOOT BOARDS, MIRRORS, GRIPS, YAFTERBURNER & ACCESSORIES

lifetime warranty

PIPES & PERFORMANCE Bagger Nation Racing Monsta 45 Performance Exhaust - Pages 184-185

SECTION

Rinehart Adapters for Monsta 45 Designer Exhaust Tips - Page 186

Muffler Extension Kit for Super Stretch Bags and Fenders - Page 186 Bagger Nation Phantom 2:1 Bag Pipes - Page 188 Headers - Page 189 Force Air Cleaner Kit - Page 190 Force Air Logo Cap - Page 191 Force Air Cleaner Filter Fairing - Page 191

Paul and G-Ma Mary cruisin Main Street Sturgis 2013

PAGE

183

602.840.4205 | BAGGERNATION.COM

MONSTA 45s PERFORMANCE EXHAUST

4 A 5S T S N

Paul Yaffe and Bagger Nation® have brought you some of the hottest exhaust trends over the past couple of decades. 8 years ago, we invented the stylized exhaust tip for Baggers with our Yafterburner™ Exhaust Tips. Well, it’s time to introduce the next BIG thing in performance exhaust! With the evolution of the custom Bagger over the past decade, and the Bagger Nation role in that evolution, we’ve seen wheels get bigger, bags and fenders get longer... yet nothing devel-

oped in the exhaust department to create overall balance with everything BIG. Well, consider this issue addressed! Check out our NEW Monsta 45 Performance Exhaust! The Monsta 45 tips are a full 4.5” in diameter and fill our Chupa rear fenders perfectly, while fitting seamlessly under our Big Bag and Super Stretch Bags!

PER

How do they sound? Incredible... with a deep throaty rumble that’s ready to rock!

How do they perform? Amazing... with a 17% bolt-on increase in horsepower right out of the box!

ANCE E

Bagger Nation offers you 4 killer tip styles to choose from. And whether you prefer flawlessly chrome-plated tips, or wicked satin black with machined accents, there is surely a perfect match for your Bagger! So go BIG or go home with the NEW Bagger Nation Monsta 45 Performance Exhaust! The Monsta 45 is a BIG middle finger to stock exhaust and brings balance to your Bagger! Part # M45FLC / Monsta 45s w/ Groovy Tips - Chrome / Price: $695.00 Part # M45FLB / Monsta 45s w/Groovy Tips – Black / Price: $695.00 Part # M45HMC / Monsta 45s w/ Holy Moly Tips - Chrome / Price: $695.00 Part # M45HMB / Monsta 45s w/Holy Moly Tips – Black / Price: $695.00 Part # M45SFC / Monsta 45s w/ Speed Freak Tips - Chrome / Price: $695.00 Part # M45SFB / Monsta 45s w/Speed Freak Tips – Black / Price: $695.00 Part # M45YBC / Monsta 45s w/ Yafterburner Tips - Chrome / Price: $695.00

2014-2015 COMPATIBLE

Before 3.5”

Actual Size

Yafter 4.5”

Actual Size

Yafterburner™ Tips

Speed Freak™ Tips

Holy Moly Tips

PAGE

185

Groovy Tips

602.840.4205 | BAGGERNATION.COM

PIPES & PERFORMANCE

Part # M45YBB / Monsta 45s w/Yafterburner Tips – Black / Price: $695.00

GOT RINEHARTS? WANT MONSTA 45 TIPS? RINEHART 4” ADAPTER KIT Due to the overwhelming response to Paul’s new designer tips, Bagger Nation® now offers an adapter kit that allows our Monsta 45s tips to be installed on Rinehart touring exhaust systems! Part # M45-TIPADAPT-CHR / Pipe Tip Adapter - Chrome / Price: $59.95 Part # M45-TIPADAPT-BLK / Pipe Tip Adapter - Black / Price: $59.95

EXHAUST EXTENSION KIT When using our NEW Dual Outlet Super Stretch Fenders and Saddle-

MONSTA 45 TIPS

bags, you’ll need to extend your exhaust pipes. Our Exhaust Exten-

Part # M45-TIP-FLB / Monsta 45 Groovy Tip - Black / Price: $299.95

clamps that will accomplish the job with ease.

sion Kit includes pipe extensions, heat shields, muffler supports and

Part # M45-TIP-FLC / Monsta 45 Groovy Tip – Chrome / Price: $299.95 Part # M45-TIP-HMB / Monsta 45 Holy Moly Tip – Black / Price: $299.95

PIPES & PERFORMANCE

Part # PEK / Pipe Extension Kit / Price: $199.95

Part # M45-TIP-HMC / Monsta 45 Holy Moly Tip – Chrome / Price: $299.95 Part # M45-TIP-SFB / Monsta 45 Speed Freak Tip – Black / Price: $299.95 Part # M45-TIP-SFC / Monsta 45 Speed Freak Tip – Chrome / Price: $299.95 Part # M45-TIP-YBB / Monsta 45 Yafterburner Tip – Black / Price: $299.95 Part # M45-TIP-YBC / Monsta 45 Yafterburner Tip – Chrome / Price: $299.95

JUST THE TIP PLEASE!

Yafterburner™ Tips 602.840.4205 | BAGGERNATION.COM

PAGEFreak™ Tips Speed

Holy Moly Tips

Groovy Tips

PAGE

187

602.840.4205 | BAGGERNATION.COM

New

BAGGER NATION 2-2 HEADER new 2-2 replacement header! Each Bagger Nation 2-2 Header system features a hidden inter-connect for maximum top end horsepower, and it attaches like your stock pipe and causes no loss of clearance. This header will balance flow and sound, and feature 220 degree full coverage individual heat shields for an awesome appearance. The headers are available in two model versions: 2009-2015 or 1993-2008. Both are available beautifully chrome plated or black ceramic coated and both 18mm and 12mm 02 sensor bungs are included! All mounting hardware and new exhaust gaskets are provided. Pair our new 2-2 Header with a set of our

PHANTOM BAG PIPES

NEW Monsta 45 Racing Exhaust and get ready to hang on!! Your ride will not only look fantastic it will realize significant horsepower gains as well!

Phantom Bag Pipes have been an incredible success for Bagger Nation®. Now, we introduce the all NEW Phantom Bag Pipes! Longer, curvier, with a removable baffle for those who roll bold. Our Phantom Bag Pipes are black ceramic coated with a four piece stylized chrome heat shield and a removable core. Of course, Bagger Nation® has our Chupa Fenders and stretch bags available for a truly radical custom look for your Bagger!

Part #HDR-09-14-FLHR-B / 2-2 Header black ceramic 2009-2015 / Price: $624.95 Part #HDR-09-14-FLHR-CH / 2-2 Header chrome 2009-2015 / Price: $525.85 Part #HDR-93-08-FLHR-B / 2-2 Header black ceramic 1993-2008 / Price: $624.95

2014-2015 COMPATIBLE

Made in the USA

Part #HDR-93-08-FLHR-CH / 2-2 Header chrome 1993-2008 / Price: $525.85

Part # PBP / 2009 & Earlier / Price: $1399.00 Part # PBP-10 / 2009 & Later / Price: $1349.00

602.840.4205 | BAGGERNATION.COM

PAGE

188

PAGE

189

602.840.4205 | BAGGERNATION.COM

PIPES & PERFORMANCE

We all want to scrap our stock cat-corked head pipes! They are heavy, hot as hell and lets not even talk about horsepower… or lack thereof! ! Well, check out our

Shown: Force Air Cleaner Kit with Filter Fairing

FORCE AIR CLEANER KIT

LOGO FILTER CAP

FILTER FAIRING

This is the original forward elbow kit that Paul and John from Force

Let everyone know that your Bagger is the coolest by sporting our Bagger

As if the Bagger Nation® Force Air Cleaner Kit wasn’t cool enough, we

Products developed 20 years ago! Our Force Air Cleaner Kit comes

Nation® Logo Filter Cap! Our filter cap fits perfectly on the front of our

also offer our Filter Fairing! This handmade steel accent piece comes

with everything you’ll need to bolt our high-flow system directly to

Force Filters, has no visible hardware, and looks great! CNC machined

chrome plated, or raw and ready for paint to match your bike.

your carb or EFI powered bike. It gives an all business, racy look to

from 6061-T6 aluminum and beautifully

your Bagger!

chrome plated.

The Force Air Cleaner Kit includes: Chrome support bracket w/

Part # BNFC / Bagger Nation Logo Filter Cap - Chrome / Price: $29.95

internal breathers and chrome breather bolts, polished intake elbow,

Part # BNFC-B / Bagger Nation Logo Filter Cap - Black / Price: $29.95

Part # FF-C / Filter Fairing - Chrome / Price: $148.95 Part # FF / Filter Fairing Raw / Price: $105.95

PIPES & PERFORMANCE

genuine K&N air filter w/ stainless mount band. Part # FAC-K / Force Air Cleaner Kit / Price: $416.95 Part # FAC-K-08 / Force Air Cleaner Kit 08 / Price: $459.95

PAGE

190

PAGE

191

602.840.4205 | BAGGERNATION.COM

MOTORCYCLE AUDIO Rockford Fosgate Power Amplifiers - Pages 194-195 Rockford Fosgate Bluetooth Adapter - Pages 196-197 Rockford Fosgate / Bagger Nation® Digital Media Center w/ Bluetooth - Page 198 The Bagger Nation® OEM Supreme 75EX System - Page 199 The Bagger Nation® OEM Ultra Supreme 75EX System - Page 199 The Bagger Nation® Super Stereo For Road Glides or Baggers w/ Vented Faring Lowers - Page 200 The Bagger Nation® Road King Super Stereo Kit - Page 201 The Bagger Nation® OEM Ultimate 400 / T-4 Component System - Page 202 The Bagger Nation® House Party 300 System - Page 203 The Bagger Nation® House Party 600 System For Road Glides - Page 204 Rockford Fosgate 2 Speaker / 140W Audio System Upgrade - Page 205 Rockford Fosgate 4 Speaker / 160W Audio System Upgrade - Page 205 Double Trouble Killer Audio Lids - Page 207 Bagger Nation® Killer Audio Lids - Page 209

SECTION

2014-2015 Bagger Nation® Killer Audio Lids - Page 209 Rockford Fosgate Two and Four Channel Amplifiers - Page 210 Rockford Fosgate 300W & 500W Mono Amplifiers - Page 210 Bagger Nation® BRT Amplifier Wiring & Installation Accessories - Page 211 Rockford Fosgate Power Speakers - Page 212 Bigger is Better 6.5 Speaker Adapters - Page 213 Rockford Fosgate Marine Grade Speakers - Page 214 Audio Lid Conversion Kits and Accessories - Page 214

602.840.4205 | BAGGERNATION.COM

PAGE

192

PAGE

193

602.840.4205 | BAGGERNATION.COM

the next “little” thing is here!!

• 400 - 500 Watts of constant amazingly clean power • Compact size means no storage loss

New

• Class AD Topology delivers unprecedented clarity • Forced induction dual fans provide dynamic thermal management • New clean technology eliminates signal & source clipping + distortion with easy on board LED tuning • The ultimate motorcycle amplifier for the avid purist who will settle for nothing but the best • Call your Bagger Nation sales rep to get hooked up with the ultimate in motorcycle audio horsepower

Part # RF-T400X2AD / T400X2AD Two-Channel Power Amplifier / Price: $499.95 Part # RF-T400X4AD / T400x4AD Four-Channel Power Amplifier / Price: $499.95

Introducing the new POWER series amplifiers. PAGE

194

CALL NOW! PAGE

195

SOUND LAB

500x1

400x4

400x2

Part # RF-T500X1BR / T500x1BR Mono Power Amp / Price: $529.95

602.840.4205 | BAGGERNATION.COM

ROCKFORD FOSGATE BLUETOOTH ADAPTER

Stream audio from your phone to your bike... Finally! Introducing the NEW Rockford Fosgate Universal Bluetooth Adapter! This trick accessory turns your head unit into a modern music machine! No cable from your phone or MP3 player into the deck, no double-stick tape holding your device to the fairing... those days are through!

New

Just enable the Bluetooth in your phone, search for the Rockford Fosgate device, click play, and BOOM! Your music is streamed wirelessly, and your Bagger can rock! We shop tested this device and itâ&#x20AC;&#x2122;s roadworhty and approved! This accessory changes everything... Turn on your music, stick your phone in your pocket and ride! Instructions included.

SOUND LAB

Part # RFBA / Rockford Fosgate Bluetooth Adapter / Price: $49.00

602.840.4205 | BAGGERNATION.COM

PAGE

196

PAGE

197

602.840.4205 | BAGGERNATION.COM

THE BAGGER NATION® OEM SUPREME 75EX This IS the system for you! The Bagger Nation® OEM Supreme 75EX System rocks 75 watts per channel along with separate amp-tuning controls that allow you to drive your speakers as hard as you want! This is an expandable 2-speaker system for both Batwing or Road Glide fairing models. The Bagger Nation® OEM Supreme 75EX System includes: (1) Rockford Fosgate RF300x4 tune-able amp, (2) Rockford Fosgate Power 6.5” coaxial speakers, (2) 6.5” Bigger Is Better speaker adapters. Each Kit includes: Hardware. Mount/ Heat-Sink. Wiring Harness. Step-by-step instructions. Part # RF300X4-OEM / OEM Supreme System / Price: $498.95 Part # RF300X4-OEM-BW / OEM Supreme System - Batwing Fairings / Price: $498.95

THE BAGGER NATION® ULTRA SUPREME 75EX Our latest complete stereo system caters to Ultra Classics! The Bagger Nation® Ultra Supreme System is driven by the Rockford Fosgate 300x4 amplifier, and replaces the stock

ROCKFORD FOSGATE/BAGGER NATION® DIGITAL MEDIA CENTER W/ BLUETOOTH

in-fairing speakers with Rockford Fosgate Power 6.5” coaxial speakers. It also upgrades the tour pack speakers with Rockford Fosgate Power coaxial 5.25” speakers.

If you own a Road Glide and looking for the coolest stereo around, your search just ended! Rockford Fosgate and Bagger Nation® now offer our NEW Digital Media Center for Road

If you want to rock out at highway speeds, look no further... The Bagger Nation® Ultra Su-

Glides. This weather resistant, state-of-the-art system will replace your stock head unit with easy modifications. Our Digital Media Center has AM/FM, Sirius Satellite, MP3, Bluetooth,

preme System will blow you away!

and iPod functions. amp, (2) Rockford Fosgate Power 6.5” coaxial speakers, (2) 6.5” Bigger Is Better speaker

serves as a 200 watt, 4 channel amp.

adapters, (2) 5.25” Rockford Fosgate Power coaxial speakers.

Each Kit includes: Hardware. Step-by-step instructions.

Each Kit includes: Hardware. Mount/ Heat-Sink. Wiring Harness. Step by Step instructions.

We have also just finished a peripheral option for the media center that will allow you to control the unit with your stock HD hand controls! (Sold separately)

Part # RF300X4-UGSS / Bagger Nation Ultra Supreme 75EX System / Price: $629.95

Part # DMC / Digital Media Center (3pc. Kit) / Price: $622.95 Part # RF-PCC / Peripheral Hand Control Kit / Price: $280.95

602.840.4205 | BAGGERNATION.COM

PAGE

198

PAGE

199

602.840.4205 | BAGGERNATION.COM

SOUND LAB

The Bagger Nation® Ultra Supreme 75EX System includes: (1) Rockford Fosgate BRT 300x4 The Rockford Fosgate/ Bagger Nation® Digital Media Center includes: A new satin billet face-plate, a Digital Media Center touch screen control panel, and a hidden control box that

THE BAGGER NATION® SUPER STEREO FOR ROAD GLIDES OR BAGGERS WITH VENTED FAIRING LOWERS If you own a Road Glide, you’re aware of how bad-ass our Bagger Nation® Super Stereo Kit is. Well, with the introduction of HD’s new 6.5” fairing-lower speaker pods, you can add our Super Stereo Kit to any touring model that has fairing lowers! Our Kit puts either (4) 6.5” Rockford Fosgate speakers in a Road Glide fairing... OR it will put (2) 6.5” speakers in the fairing and (2) in the lowers. Either way you’ve got a rock concert in front of you at any speed and in any condition! This system will provide you with amazing sound clarity and volume capabilities that you’ve never heard from a motorcycle sound system! The Bagger Nation® Super Stereo System includes: (1) Rockford Fosgate BRT300x4 amplifier,

THE BAGGER NATION® ROAD KING SUPER STEREO KIT Love your Road King but wish it rocked? The NEW Bagger Nation® Road King Super Stereo Kit is what you need to kick-out-the-jams on your Road King! With iPod integration and volume control, you can run Rockford Fosgate 6x9” speakers under our Killer Audio Lids and rock it down the highway! The Bagger Nation® Road King Super Stereo Kit includes:(1) Rockford Fosgate BRT 300-2 amplifier, (2) Rockford Fosgate Power 6x9” 3-way speakers, (2) Killer Audio Lids Each Kit includes: Hardware. Wiring Harness. Step by Step instructions. Part # ISRK / Bagger Nation Road King Super Stereo Kit / Price: $1119.99 Part # ISRK-2014 / Bagger Nation Road King Super Stereo Kit 2014 / Price: $1219.99

(4) Rockford Fosgate Power 6.5” coaxial speakers, (2) 6.5” Bigger Is Better speaker adapters. Each Kit includes: Hardware. Mount/ Heat-Sink. Wiring Harness. Step by Step instructions.

SOUND LAB

Part # RF300X4-SS / Bagger Nation Super Stereo For Baggers w/ Fairing Lowers / Price: $672.95

602.840.4205 | BAGGERNATION.COM

PAGE

200

PAGE

201

602.840.4205 | BAGGERNATION.COM

New

THE BAGGER NATION® OEM ULTIMATE 400 / T-4 COMPONENT

New

THE BAGGER NATION® HOUSE PARTY 300 SYSTEM

The all NEW Bagger Nation OEM Ultimate is the finest, most powerful 6.5” component speaker system we

For those of us who love music, we offer our ultimate stereo equipment combination. The

offer! With over 400 watts of power and our NEW T-4 component speakers

Bagger Nation® House Party 300 System is amazing!

You’ll be blown away at just how amazing a two speaker system can sound. It will honestly hurt your ears when cranked up! This is the most incredible, clear sounding 2 speaker

The Bagger Nation® House Party 300 System for Batwing Fairing or Road Glide models in-

motorcycle audio system we’ve ever created!

cludes: (1) Rockford Fosgate BRT 300x4 amp, (2) Rockford Fosgate Power 6.5” coaxial speakers, (2) Bigger Is Better speaker adapters, (2) of our Killer Audio Lids, (2) Rockford Fosgate

The Bagger Nation OEM Ultimate system includes: (1) Rockford Fosgate Power 400x2 amplifier, (2) Power T-4

Power 6x9 3-way speakers.

6.5” component speakers w/ tweeters and crossovers, (2) Bigger is better speaker adapters, Amp mount/ heat sink plate and complete wiring kit with step by step instructions.

Each Kit Includes: Hardware. Mount/Heat Sink. Wiring Harness. Step by Step instructions.

Note: Requires removal of the stock air temp & oil or voltage gauge for T-4 tweeter install or separate holes

Part # RF-300X4-BHP / Bagger Nation Rockford Batwing House Party System

must be cut for tweeter install.

Price: $1174.95 Part # RF-300X4-BHP-14 / Bagger Nation Rockford Batwing House Party System

Part # RF-400T-4 / Bagger Nation OEM Ultimate Stereo 400/ T-4 Component System / Price: $1599.00

Price: $1274.95

SOUND LAB

YOUR NEIGHBORS WILL HATE YOU!

602.840.4205 | BAGGERNATION.COM

PAGE

202

PAGE

203

602.840.4205 | BAGGERNATION.COM

New THE BAGGER NATION® HOUSE PARTY 600 SYSTEM FOR ROAD GLIDES

ROCKFORD FOSGATE 2 SPEAKER/140W AUDIO SYSTEM UPGRADE

ROCKFORD FOSGATE 4 SPEAKER /160W AUDIO SYSTEM UPGRADE

This Prime 2-channel 140 Watt complete kit designed specifically for 1998 - 2013 Harley-

The PRIME R1-HD4-9813 is a 4-channel 160 Watt complete kit designed specifically for

What is your Road Glide missing if you don’t have the House Party 600? Try 75 watts per

Davidson® motorcycles*. The kit includes everything you’ll need for a plug and play

1998 - 2013 Harley-Davidson® motorcycles*. The kit includes everything you’ll need for

channel to the 4 front speakers and a whopping 150 watts per channel to the 6x9”s in the

install!! This “Closed loop” design is a precisely matched (using equalization and gain)

a plug and play install!! This “Closed loop” design is a precisely matched (using equaliza-

rear! It boasts 6 speakers and a total of 600 watts of power!

amplifier and speaker system for optimized output and reliability. Includes pass-thru

tion and gain) amplifier and speaker system for optimized output and reliability. Includes

outputs for future expansion of audio system by sending signal down to another audio

pass-thru outputs for future expansion of audio system by sending signal down to

component.

another audio component.

nel amp, (4) Rockford Fosgate Power 6.5” coaxial speakers, (2) Bigger Is Better speaker adapt-

140 Watt / Complete motorcycle kit / Plug and play install

160 Watt /Complete motorcycle kit / Plug and play install

ers, (2) of our Killer Audio Lids, (2) Rockford Fosgate Power 6x9 3-way speakers.

*Fits 1998-2013 Harley-Davidson™ factory 2-speaker systems

*Fits 1998-2013 Harley-Davidson™ factory 4-speaker systems

Optimized EQ, crossover and gain

Three position output level control

Pass-Thru output for future system expansion

Part # RF-300X4-RHP / Bagger Nation Rockford Road Glide House Party System

Extruded aluminum heatsink

2/4 channel input switch

Price: $1620.95

Short circuit protection

Extruded aluminum heatsink

Thermal protection

Fan cooled

Multiple mounting options

Short circuit protection

Includes all harnesses and hardware for full installation

Thermal protection

1 Year Standard Warranty

Multiple mounting options

Includes all harnesses and hardware for full installation

1 Year Standard Warranty

Road Glide fans, you can have Rockford’s biggest, baddest stereo of all! If you love your music, we offer Rockford’s ultimate stereo equipment combination, The House Party 600!

The Bagger Nation® Road Glide House Party 600 System for Road Glide models includes: (1) Rockford Fosgate BRT 300x4 watt 4 channel amp, (1) Rockford Fosgate BRT300x2 2 chan-

Each Kit Includes: Hardware. Mount/Heat Sink. Wiring Harness. Step by Step instructions.

*Not compatible with some CVO™ and Screaming Eagle™ Harley-Davidson motorcycle models.

motorcycle models.

Part # R1-HD2-9813 / Rockford Fosgate 2 Speaker Audio System Upgrade / $299.95

Harley-Davidson® is a registered trademark of Harley-Davidson Motor Company Part # R1-HD4-9813/ Rockford Fosgate 4 Speaker Audio System Upgrade / $399.95

602.840.4205 | BAGGERNATION.COM

PAGE

204

PAGE

205

602.840.4205 | BAGGERNATION.COM

SOUND LAB

*Not compatible with some CVO™ and Screaming Eagle™ Harley-Davidson Harley-Davidson® is a registered trademark of Harley-Davidson Motor Company

DOUBLE TROUBLE KILLER AUDIO LIDS So you thought our Killer Audio Lids with one pair of 6x9s was crazy? Well, we went double crazy with our NEW Double Trouble Killer Audio Lids! Now you can have twice the amount of ground-pounding sound with TWO pair of 6x9s! Our NEW Double Trouble Killer Audio Lids are injection molded TPO, water resistant, and fit stock HD bags or stretched bags like a glove. No storage room is sacrificed, because everything is neatly tucked in the lid! Choose from our line of Rockford Fosgate speakers, and your Bagger will rock... twice as hard! The Double Trouble Killer Audio Lids include: (2) saddlebag lids, (4) grilles, lid seals, hydrocloth, tethers, and hardware. Speakers sold separately.

SOUND LAB

Part # DTL / Double Trouble Killer Audio Lids / Price: $499.95

PAGE

207

602.840.4205 | BAGGERNATION.COM

BAGGER NATION速 KILLER AUDIO LIDS The Bagger Nation速 Killer Audio Lids are the best way to get ground-pounding sound from your Bagger... that YOU can actually hear while riding! Our Killer Audio Lids offer 6x9 power without sacrificing the profile of the saddlebag lid! No storage room is sacrificed, because everything is neatly tucked in the lid. The Bagger Nation速 Killer Audio Lids are simply the cleanest audio equipped lid design available! Our Lids are injection molded TPO, water resistant, and fit stock HD bags or stretched bags like a glove! Choose from our line of Rockford Fosgate speakers, and your Bagger will rock! The Bagger Nation Killer Audio Lids include: (2) saddlebag lids, (2) grilles, lid seals, hydrocloth, and tethers. Speakers sold separately. Part # CSSL / Killer Audio Lid Kit / Price: $399.95 Part # CSSL-2014 / Killer Audio Lid Kit 2014 / Price: $495.95

New

SOUND LAB

2014-2015 COMPATIBLE

602.840.4205 | BAGGERNATION.COM

PAGE

208

PAGE

209

602.840.4205 | BAGGERNATION.COM

BAGGER NATION® BRT AMPLIFIER WIRING & INSTALLATION ACCESSORIES Once we fell in love with all the bad-ass Rockford Fosgate audio components, we started developing helpful accessories to make the installations a breeze! These items are included with each of our full matched kits as well as step by step installation instructions. We have component and location specific complete wiring kits, model specific aluminum hard amp mount/heat sinks, dual amp mounts for Road Glides, Power hubs for dual amp applications and much more! The wiring kits and amp mounts are only available with the purchase of one of our Rockford Fosgate BRT series amplifiers. Part # RFD1 / Distribution Blocks (for two amplifiers / 2 blocks) / Price: $43.90 Part # 344x2 / BRT + 2 Speaker and Amp Wiring Kit / Price: $69.95 Part # 344x4IF / BRT + 4 Speakers and Amp in Fairing Wiring Kit / Price: $84.95 Part # 344x4AL / BRT + 4 Speakers w/ Audio Lids Wiring Kit / Price: $103.95

ROCKFORD FOSGATE TWO AND FOUR CHANNEL AMPLIFIERS

ROCKFORD FOSGATE 300W & 500W MONO AMPLIFIERS

Part # 344x6HP / BRT + 6 Speakers w/ Audio Lids Wiring Kit / Price: $173.95

Choose the Rockford Fosgate world famous BRT300x4 4-channel amplifier, and you’ll get

Got Bass? You certainly will with our Rockford Fosgate BRT mono amplifiers! Choose

Part # 344AM-R / Single Premium Amp Mount/Heat Sink for Road Glides (right) / Price: $29.95

the most powerful, crystal clear, 75 watts-per-channel amplifier available in its size!

our BRT300x1 Mono amplifier, which is perfect for 6” or 8” subs. Or step-up to our

Part # 344DAM / Dual Premium Amp Mount/Heat Sinks (Road Glide) / Price: $49.90

NEW powerful BRT500x1 Mono amplifier, which will kick out serious bass in our 10” /

Part # 344AMBWIS / Single Premium Amp Mount/Heat Sink Batwing w/ Ipod or Satellite / Price: $29.95

12” or larger format sub woofers!

Part # AL-65 / Premium Audio Lid Adapters for 6.5 Component System / Price: $55.95

Need even more power? Then check out our NEW Rockford Fosgate BRT300x2 2-channel

Part # 344AMBW / BRT Single Premium Amp Mount for Batwing Fairings / Price: $29.95 Part # 344AM-L / Single Premium Amp Mount/Heat Sink for Road Glides (left) / Price: $29.95

Part # ALWP / Premium Audio Lid Adapter for Water Proof Marine Speakers / Price: $45.95

amplifier, which produces a whopping 150 continuous watts-per-channel! This is the most powerful amp available in its size, anywhere!

Our amp and sub combos will find every loose screw on your Bagger, so you’ll defi-

Part # ALWK / Audio Lid Quick Detach Wiring Kit / Price: $49.95

nitely know what the buzz is about!

Part # FL65 / Fairing Lowers Adapter Kit for 6.5” Speakers and Grilles / Price: $24.95* *Fairing lower speaker mounts sold separately

Part # BRT3004 / Rockford Fosgate 300 Watt - 4 Channel Amplifier / Price: $249.95

SOUND LAB

Part # BRT3001 / Rockford Fosgate 300 Watt - Mono Amplifier / Price: $249.95

Part # BRT3002 / Rockford Fosgate 300 Watt - 2 Channel Amplifier / Price: $249.95

Part # BRT5001 / Rockford Fosgate 500 Watt - Mono Amplifier / Price: $399.99

602.840.4205 | BAGGERNATION.COM

PAGE

210

PAGE

211

602.840.4205 | BAGGERNATION.COM

ROCKFORD FOSGATE POWER SPEAKERS Bagger Nation® is proud to offer the incredible Power line of Rockford Fosgate speakers. The Power line is available in all shapes and sizes for just about any motorcycle application. From the 5.25 Tour Pack upgrades to bass pounding 6x9s, all the way to the ultimate T-4 Components... you won’t find a better motorcycle speaker at any price. Part # T1693 / Power Full Range 3-Way 6x9 Speaker / Price: $179.99 Part # T1652S / Power T-1 Component 6.5” System - Includes Crossovers / Price: $349.99 Part # T152 / Power Full Range Coaxial 5.25” Speaker / Price: $149.99 Part # T4652-S / Power T-4 Component 6.5” Driver w/ Liquid Crystal Polymer Tweeters and Crossovers / Price: $999.99 Must be modified to fit Road Glides

BIGGER IS BETTER 6.5 SPEAKER ADAPTERS With our Bigger Is Better Speaker Adapters, you can replace the small factory speakers with our awesome 6.5” speakers and really blast some tunes! The conical shape design aids in sound efficiency, and our quality, injection molded adapters retain the stock fairing supports brackets. No fairing modifications required, except for Road Glide models. Part # BSA / Bigger Is Better Speaker Adapters / Price: $39.95

602.840.4205 | BAGGERNATION.COM

T152

PAGE

212

T1693

T4652-S

SOUND LAB

T1S652

PAGE

213

602.840.4205 | BAGGERNATION.COM

T1625-S

AL-65

ALWP

M262

HEK

ROCKFORD FOSGATE MARINE GRADE SPEAKERS Rockford Fosgate Marine Grade Speakers are the most water-resistant speakers on the market. To ensure the highest degree of durability, put these speakers in our Killer Audio Lids, and you’re good-to-go

AUDIO LID CONVERSION KITS AND ACCESSORIES

in any weather conditions!

Bagger Nation® offers various audio-related accessories that help your Bagger rock!

Adapter required, sold separately.

Part # T1652S / Power T-1 Component 6.5” System - Includes Crossovers and Tweeters / Price: $349.99

Part # M262B / Rockford Fosgate marine Grade 6.5” Water-Resistant Speakers/ Price: $249.99

Part # HEK / Headache Eliminator Kit / Price: $9.99

Part # ALWP / Premium Audio Lid Adapter For Water Resistant Marine Speakers / Price: $55.95

Part # ALWK /Audio Lid Quick Detach Wiring Kit / Price: $49.95

602.840.4205 | BAGGERNATION.COM

PAGE

214

PAGE

215

SOUND LAB

Part # AL-65 / Premium Audio Lid Adapters For 6.5” Component System / Price: $65.95

602.840.4205 | BAGGERNATION.COM

APPAREL BN Coin Cap - Pages 218-219 Classic Bagger Nation Cap - Pages 220-221 Bagger Nation V-Neck - Pages 222-223 BN Embroidered Tee - Pages 224-225

SECTION

Bagger Nation Tee - Pages 226-227 8 Ball Vintage Tee - Pages 228-229 Bagger Script Tee - Pages 230-231 Bagger Nation Hoodie - Pages 232-233 Bagger Nation Shop Jacket - Pages 234-235 Ladies Script Tee - Pages 236-237 Ladies Boy Beaters - Pages 238-239 Bagger Nation Sticker Pack - Page 241

PAGE

217

602.840.4205 | BAGGERNATION.COM

BN COIN CAP We’ve added a new lid to the collection... Check the NEW Bagger Nation® Coin Cap! Just like all our hats, it’s a Flex-Fit, 100% wool, deep-fitting, and cool looking! We got your dome covered, pinhead to buckethead... in S/M or L/XL. Part # CAP-COIN-RL / Coin Cap Red L/XL / Price: $20.00 Part # CAP-COIN-RS / Coin Cap Red S/M / Price: $20.00 Part # CAP-COIN-BL / Coin Cap Black L/XL / Price: $20.00

APPAREL

Part # CAP-COIN-BS / Coin Cap Black S/M / Price: $20.00

602.840.4205 | BAGGERNATION.COM

PAGE

218

PAGE

219

602.840.4205 | BAGGERNATION.COM

CLASSIC BAGGER NATION® CAP

Part # CAP-R / Classic Bagger Nation Cap - Red - L/XL / Price: $20.00

Paul Likes a certain kind of hat... Flex-Fit, 100% wool, deep-fitting so it will stay on

Part # CAP-W / Classic Bagger Nation Cap - White - L/XL / Price: $20.00

when he’s riding. It also takes a pretty big hat to cover his big ol’ head!

Part # CAP-W-S / Classic Bagger Nation Cap - White - S/M / Price: $20.00

Part # CAP-R-S / Classic Bagger Nation Cap - Red - S/M / Price: $20.00

Part # CAP-GGRN / Classic Bagger Nation Cap - Grey/Green - L/XL / Price: $20.00 We’ve got your dome covered, pinhead to buckethead... in S/M or L/XL.

Part # CAP-GGRN-S / Classic Bagger Nation Cap - Grey/Green - S/M / Price: $20.00 Part # CAP-BGLXL / Classic Bagger Nation Cap - Black/Green - L/XL / Price: $20.00 Part # CAP-BGSM / Classic Bagger Nation Cap - Black/Green - S/M / Price: $20.00 Part # CAP-BBLXL / Classic Bagger Nation Cap - Black/Black - L/XL / Price: $20.00

APPAREL

Part # CAP-BBSM / Classic Bagger Nation Cap - Black/Black - S/M / Price: $20.00

602.840.4205 | BAGGERNATION.COM

PAGE

220

PAGE

221

602.840.4205 | BAGGERNATION.COM

BAGGER NATION速 V-NECK Comfy is the name of the game with our NEW Bagger Nation速 V Neck! We kicked it back a notch with this super casual, soft v-neck tee. Available in White, Slate Blue, and Black. We got you covered, from Medium through 2XL. Bagger Nation V-Neck Colors: White, Black, Blue

APPAREL

Sizes: M, L, XL, XXL / Price: $20.00

602.840.4205 | BAGGERNATION.COM

PAGE

222

PAGE

223

602.840.4205 | BAGGERNATION.COM

BN EMBROIDERED TEE We thought we would add some classy embroidery, so hereâ&#x20AC;&#x2122;s the BN Embroidered Tee! A coin size embroidered logo on the front left pocket, and a big BN logo screened on the back. A super casual, soft tee, and available in Red, Royal Blue, and Grey. We got you covered, from Large through 3XL. Bagger Nation Emroidered Tee Colors: Red, Royal Blue, Grey

APPAREL

Sizes: L, XL, XXL, XXXL / Price: $20.00

602.840.4205 | BAGGERNATION.COM

PAGE

224

PAGE

225

602.840.4205 | BAGGERNATION.COM

BAGGER NATION速 TEE Our classic Bagger Nation速 Tee comes in white or navy. We got you covered, from Large through 5XL. Bagger Nation Tee Colors: White, Navy Sizes: L, XL, XXL / Price: $20.00

APPAREL

Sizes: XXXL, XXXXL, XXXXXL / Price: $25.00

602.840.4205 | BAGGERNATION.COM

PAGE

226

PAGE

227

602.840.4205 | BAGGERNATION.COM

8 BALL VINTAGE TEE Our retro inspired, pinstriped 8 Ball Vintage Tee comes in black or white. We got you covered, from Medium through 5XL. Click on the image for a spin through our color options! 8 Ball Vintage Tee Colors: White, Black Sizes: M, L, XL, XXL / Price: $20.00

APPAREL

Sizes: XXXL, XXXXL, XXXXXL / Price: $25.00

602.840.4205 | BAGGERNATION.COM

PAGE

228

PAGE

229

602.840.4205 | BAGGERNATION.COM

BAGGER SCRIPT TEE Our Bagger Script Tee comes in black with our bitchin’ Bagger Nation® script logo on the front and back. We got you covered, from Large through 5XL. Bagger Script Tee Colors: Black Sizes: L, XL, XXL / Price: $20.00

APPAREL

Sizes: XXXL, XXXXL, XXXXXL / Price: $25.00

602.840.4205 | BAGGERNATION.COM

PAGE

230

PAGE

231

602.840.4205 | BAGGERNATION.COM

BAGGER NATION速 HOODIE Gotta stay warm on those cool rides... Our Bagger Nation速 Hoodie does the trick, and comes in Black with our classic logo and screened lower sleeves. We got you covered, from Small through 3XL. Bagger Script Hoodie Colors: Black

APPAREL

Sizes: S, M, L, XL, XXL, XXXL / Price: $59.95

602.840.4205 | BAGGERNATION.COM

PAGE

232

PAGE

233

602.840.4205 | BAGGERNATION.COM

BAGGER NATION® SHOP JACKET Cruisin’ your Bagger is cool. Freezing your ass off is not! Stay toasty on your ride and look stylish standin’ around in the Bagger Nation Shop Jacket! Our black, zip-front, lined jacket has front pockets, a sleeve pocket, and has white Bagger Nation® screens on the chest, on the sleeve, and a big ol’ Bagger Nation® screen on the back so you properly represent! We got you covered, from Small through 3XL.. Bagger Nation® Shop Jacket Colors: Black

APPAREL

Sizes: S, M, L, XL, XXL, XXXL / Price: $99.95

602.840.4205 | BAGGERNATION.COM

PAGE

234

PAGE

235

602.840.4205 | BAGGERNATION.COM

LADIES SCRIPT TEE Hey Ladies! Here’s a NEW Tee for all the gals that dig Bagger Nation®... A form fitting v-neck, available in black or pink. We got you covered, from Small through XL. Ladies Script Tee Colors: Black, Pink

APPAREL

Sizes: S, M, L, XL / Price: $20.00

602.840.4205 | BAGGERNATION.COM

PAGE

236

PAGE

237

602.840.4205 | BAGGERNATION.COM

LADIES BOY BEATERS Hey Ladies! This is our gift to the ones who really wears the pants! These bad-ass boy beaters have our script logo on the front, and come in white, pink, or black. We got you covered, from Small through XL. Ladies Boy Beaters Colors: Black, Pink, White

APPAREL

Sizes: S, M, L, XL / Price: $20.00

602.840.4205 | BAGGERNATION.COM

PAGE

238

PAGE

239

602.840.4205 | BAGGERNATION.COM

BAGGER NATION® STICKER PACK Slap some Bagger Nation® love on something! Send us a pic with our stickers and maybe we’ll put it on our site... or maybe we’ll call the cops!

APPAREL

Part # STICKER-PAK / Sticker Pack - 1 BN Coin, 1 Green Logo, 1 Red Logo / Price: $3.00

602.840.4205 | BAGGERNATION.COM

PAGE

240

PAGE

241

602.840.4205 | BAGGERNATION.COM

Dealers: We offer dealer accounts to licensed Motorcycle related businesses operating in a retail capacity serving the general public. (showroom, Tax license, yellow pages ad and a completed dealer application are required) A motorcycle related business conducts retail sales, parts and accessories and/or service. We reserve the right to refuse dealer status to any individual or company that we feel does not meet our requirements. Discounting the suggested retail price of our products (such as with internet stores) will result in the immediate revocation of dealer status. Dealer Advertising Agreement: Any dealer, distributor or Retailer of any Paul Yaffe Originals® or Bagger Nation® product (s) agrees that in no instance may the Paul Yaffe Originals® or Bagger Nation® logo’s, Name, similar mark or any material subject to copyright protection, be used in or be associated with any advertising that mentions, suggests or in some form is linked to a price below the suggested retail price published by Paul Yaffe Originals® or Bagger Nation®. Failure to comply with this policy will result in Paul Yaffe Originals® and Bagger Nation® terminating the agreement between Paul Yaffe Originals® and the party involved. Pricing: We reserve the right to change prices, policies and terms at anytime without prior notice.

Catalog Contents: We believe the contents and specifications of this catalog to be accurate and correct. We assume no liability foe any errors in listings, specifications, part numbers, prices or model applications. We reserve the right to change specifications, product descriptions, pricing and applications of any product at anytime without further notice and without further obligation. The reproduction of any material from this catalog is forbidden without our written approval. Important: Paul Yaffe Originals® and Bagger Nation® are in no way, shape or form connected with The Harley-Davidson Motor Company. Any products with a trademark, name, word, O.E.M. number used in this catalog by Paul Yaffe Originals® and Bagger Nation® are strictly intended, solely as a reference as to that particular part. None of our parts are D.O.T approved. All of our parts are intended for custom applications. You and only you are ultimately responsible for determining the suitability of any product and your intended use of that product for your application. Therefore you assume any and all responsibility for any outcome resulting from use or installation of any of our products in any manner. Paul Yaffe Originals® insists that you test fit any product prior to painting or cosmetic finishing. Modifying any Paul Yaffe or Bagger Nation® product for your particular application voids all warranty. Paul Yaffe Originals® and Bagger Nation® will not be held responsible for any paint or labor expenses under any circumstances and will not accept for return any product that has been modified or damaged due to improper installation.

Limited Warranty

Backorders: Every effort is made to keep all items in stock at all times. Occasionally some product may be backordered. We will make every effort to deliver backordered products as quickly as possible and we will call before shipping any backordered products that have been on order more that 30 days.

Improper Care or Misuse: Paul Yaffe Originals® and Bagger Nation® shall have no warranty obligation in the event that goods have been modified by any other person or organization, or where goods become defective in whole or in part as a result of improper installation, improper maintenance, improper use, abnormal operation or any other misuse or mistreatment of the goods.

Special Orders: Special orders are exactly that... Special. We will try to fill all special orders as fast as possible. However, special orders take as long as they take and cost as much as they cost. There are often factors pertaining to these items that are out of our control. All special orders will require at least a 50% deposit and Special orders may not be cancelled for any reason. There are no refunds on Special Orders. Things that fall under the Special Order policy are: One-of-a-kind items, another manufacturers item that we order specifically for you, Any roller, or turn-key custom motorcycle, any stocked item that we modify at your request.

Proof of Purchase: Paul Yaffe Originals® shall have no warranty obligation in the event the customer is unable to present a receipt evidencing the date on which the customer purchased the goods. Exhausts: Exhaust systems are warranted for manufacturing defects only. There is no warranty on exhaust pipes or mufflers with regard to any discoloration. Discoloration (bluing) is caused by tuning characteristics, carburetor jetting, overheating, etc...It is not caused by defective manufacturing.

Freight: Shipping is the responsibility of the purchasing party and all incurred shipping expenses will be added to the total purchase price at time of shipping unless other arrangements have been made at time of purchase. Returned Checks and Refused Shipments: All returned checks and refused shipments will result in a $45.00 processing fee. No exceptions Merchandise Returns: A returned goods authorization (RGA) is required for any item being returned to our warehouse. You must call and make arrangements for a returned item to obtain an RGA number. No freight or restocking fee will be charged on goods found to be defective or not as ordered. Returns for any other reason will be charged a 20% Re Stocking fee. All sales are final on Blem, Discontinued or Closeout items and Apparel. All returns are subject to inspection and verification before any credit is offered. Mark the letters RGA and the number given on the outside of the package and return it postage prepaid to the showroom address above. All returns without correct RGA information prominently displayed on the outside of the package will be refused. All retail returns will receive a repaired or replaced item at the discretion of Paul Yaffe Originals® or a merchandise credit. No refunds will be issued.

Chrome plating: If after initial inspection a flaw is discovered in the chrome, DO NOT INSTALL IT!! Please call Paul Yaffe Originals® for an RGA and we will replace the item at no charge. If chrome fails after installation during our one year warranty period we will re-plate the item at our expense and return the item to you. Please use caution when installing chrome plated components, the finish is fragile. Especially when mating two chrome components together. Always use anti-seize when using chrome hardware on chrome plated products. Paul Yaffe Originals® and Bagger Nation® recommend using a quality wax or polish on chrome to protect their finish. Consequential Damages: Paul Yaffe Originals® and Bagger Nation® shall not be liable for any consequential or incidental damages arising from the breach of any warranties, the failure to deliver, delay in delivery, in non-conforming condition, or for any other breach of contract or duty between Paul Yaffe Originals® or Bagger Nation® and the customer. Paul Yaffe Originals® and Bagger Nation® cannot control any environment that our products may be subjected to and our warranty coverage only extends to our products in their original un-installed / as purchased form. Paul Yaffe Originals® and Bagger Nation® will not under any circumstances warranty paint or installation / removal labor on any product unless said product was purchased from Paul Yaffe Originals® or Bagger Nation® in an installed or painted form. Photos: Kriegmark, Michael Licther, Paul Markow, Jesse Nelson Art Direction, Design & Layout: Kriegmark.com

Paul Yaffe’s Bagger Nation | 2211 E Indian School Rd. - Phoenix, AZ 85016 | 602.840.4205 | baggernation.com | paulyaffeoriginals.com

Paul Yaffeâ&#x20AC;&#x2122;s Bagger Nation 2211 E Indian School Rd. - Phoenix, AZ 85016 602.840.4205 baggernation.com - paulyaffeoriginals.com

602.840.4205 | BAGGERNATION.COM

PAGE

244