GUÍA DE INSTALACIÓN INSTALATION GUIDE
Decomuro Line
Wall Paneling
Elegance , Comfort , Save and Do it yourself Tool List the area where you are 1 1 Identify going to install the sheet.
Power Drill with a 1/4 or 9/64 (Bit , drill).
r e t h e a r e a 1 P r e 1pdeasurface of dust or any 212 1 1 Clean other material, for an easyer
Measuring the wall first
i
n
s
t
a
l
a
t
i
o
n
.
the sheet on the wall. 3 11 Present 1 can mark the levels with a you
pencil in the sheet /and wall as well
Screws of 8 X 1 ½ inches
Rawl Plugs 1/4
Screw Driver ( cross )
41
Tape Measure
Drill the corners of the sheet previusly marked with the 9/64 (drill)
sheet in the wall just 1 Present 1the 512 to make sure is leveled. and star 1 1 drilling the holes in the wall using 1/4 drill
the rawl plugs, put the 6 11 Using 1 screws on , install it. and it´s ready.
Hacksaw Barniz Base Poliuretano
Varnish polyurethane base HENK
EL
Henkel Glue ÓN
Silicón
SILIC
Suggestions: If you are going to install it in exteriors , apply one hand of varnish ( polyurethane Base ) once a year To minimize the unions between sheets or holes. you can apply henkel glue and after it dryes, you can paint the area. If the product it´s installed in drywall, you must use rawl plugs for drywall for better results When you done with the installation, you can apply silicon around the perimeter. could be black or with , to seal any gap For a professional finish: you can use tile past, wait for it to dry and its ready. For more information about our products visit www.elcesar.com.mx, or give us a call at: 01 800 DECORA (01 800 833 26 72)
PRODUCT 100% SELF EXTINGUISH