SIRION™ Midi Reverse Osmosis Systems Producing up to 800 litres/hr of high purity water
The ELGA Process Water SIRIONTM Midi Reverse Osmosis systems produce high purity water, removing up to 98% of dissolved inorganics and over 99% of large dissolved organics, colloids and particles. Flow rates from 90 to 800 l/hr. Applications
• Industrial Process Water • Boiler Feed • Cleaning and rinse water • Electronics • Healthcare
Features & Benefits
Related Services
• Low Energy membranes result in lower operating pressures; cost savings
Our AQUAservice maintenance agreements are designed to allow you to choose from our wide range of capabilities the level of support you require to meet your application, operational and budgetary needs.
• Optimised flow: size ratio; space saving and efficient • 1 µm pre filtration included within unit; membrane protection
Hydrex water treatment chemicals from ELGA Process Water should be used for optimised operation.
• Modem & RS232 connections
Water reuse / recycle assessments are available to determine potential water and cost savings.
• Dry run monitor; pump protection • Treated water diverted at startup; ensures water quality
• Pharmaceuticals
• Timed recirculation rinse; reduces membrane fouling
• Oil and Gas
• Volt free contact alarm output
• Chemical Industry
• Alarm logging facility
• Pulp and Paper • Water reuse / recycle
Hydrex Chemicals
• Programmable user interface; simple operation, monitoring and storage (14 days) of flow rate, conductivity and temperature values
Option
• Output to PLC via analogue signal for conductivity monitoring
Water Reuse / Recycle
SIRION™ Midi Model Nominal Flows at 12°C* Permeate (Standard)
litres/hr
10-100 EP
10-200 EP
90-110
10-300 EP
10-500 EP
10-750 EP
180-220 280-330 450-550 650-800
Permeate (Reuse / Recycle litres/hr 45-55 90-110 140-165 225-275 325-400 Applications) Feed
litres/hr
Nominal Recovery
%
Pump Motor Size
kW
Typical Salt Rejection
%
150
300 450
70
70 70 70 70
96-98
750 1000
96-98 96-98 96-98 96-98
0.56 0.56 0.56 1.5 1.5
* Flow rates are dependent on feed water quality, those quoted are typical values based on 1000 mg/l TDS & SDI <3.
System Dimensions & Weights Model Height Depth
Width
Weight
10-100 EP
10-750 EP
mm
620
620 620 620 620
mm
600
600 600 600 600
max. 6 bar max. 25°C
Electrical Supply 10-1000 EP to 10-300 EP models 230V, 1ph. 50Hz standard 10-500 EP & 10-750 EP models 400V, 3ph-N-PE, 50Hz standard For higher flow rate applications consult ELGA Process Water.
ELGA Process Water Marlow International Parkway, Marlow Buckinghamshire SL7 1YL, UK tel. +44 (0) 1628 897000 fax. +44 (0) 1628 897001 email sales.uk@veoliawater.com www.elgaprocesswater.com
10-500 EP
1260 1260 1260 1260
kg 59
min. 2 bar min. 2°C
10-300 EP
1010
Feed Water Supply Quality Potable water free from organic contamination, chlorine and suspended matter. A softened water supply is normally required. Supply Pressure: Temperature:
10-200 EP
mm
ELGA Process Water Orbital House Redwood Crescent East Kilbride G74 5PR, UK tel. +44 (0) 1355 588140 fax. +44 (0) 1355 588141 email sales.uk@veoliawater.com www.elgaprocesswater.com
61 68
73 95
LITR 39003/Rev D: 06/13 In keeping with the progressive nature of the company, we reserve the right to amend details without notice
System Performance