SIRION™ Mini Reverse Osmosis Systems Produce up to 90 litres/hr of high purity water
The ELGA Process Water SIRIONTM Mini Reverse Osmosis systems produce high purity water, removing up to 98% of dissolved inorganics and over 99% of large dissolved organics, colloids and particles. Flow rates from 10 to 90 l/hr. Applications
• Industrial Process Water • Boiler Feed • Micro Electronics
Features & Benefits
• Low Energy membranes result in lower operating pressures; cost savings • Optimised flow: size ratio; space saving and efficient • 5 µm pre filtration included within unit; membrane protection • Digital user interface; simple operation, monitoring of conductivity and temperature • Dry run monitor; pump protection • Treated water diverted at startup; ensures water quality
• Laboratory
• Timed recirculation rinse; reduces membrane fouling
• Hospitals
• Volt free contact alarm output
• Food and Beverage Industry • Automotive Industry • Water reuse / recycle
Option
• Output to PLC via analogue signal for conductivity monitoring
Related Services
Our AQUAservice maintenance agreements are designed to allow you to choose from our wide range of capabilities the level of support you require to meet your application, operational and budgetary needs. Water Reuse / Recycle
Water reuse / recycle assessments are available to determine potential water and cost savings.
SIRION™ Mini Model
Nominal Flows at 12°C*
10-15 EP
10-40 EP
10-80 EP
Permeate (Standard)
litres/hr
10-20 30-45 60-90
Concentrate
litres/hr
15-25 40-60 80-90
Feed
litres/hr
40 90 170
Nominal Recovery
%
50 50 50
Typical Salt Rejection
%
96-98 96-98 96-98
kW
0.25 0.25 0.25
Pump Motor Size
* Flow rates are dependent on feed water quality, those quoted are typical values based on 1000 mg/l TDS & SDI <3.
System Dimensions & Weights Model
Height Depth
Width
Weight
10-40 EP
10-80 EP
697 697 697
mm
380 380 380
mm
450 450 450
kg 53 60 63
Feed Water Supply Quality Potable water free from organic contamination, chlorine and suspended matter. Softening may be required for very hard water areas. Supply Pressure: Temperature:
10-15 EP
mm
min. 2 bar min. 2°C
max. 6 bar max. 25°C
Electrical Supply All models 230V 50Hz standard. For higher flow rate applications consult ELGA Process Water.
ELGA Process Water Marlow International Parkway, Marlow Buckinghamshire SL7 1YL, UK tel. +44 (0) 1628 897000 fax. +44 (0) 1628 897001 email sales.uk@veoliawater.com www.elgaprocesswater.co.uk
ELGA Process Water Orbital House Redwood Crescent East Kilbride G74 5PR, UK tel. +44 (0) 1355 588140 fax. +44 (0) 1355 588141 email sales.uk@veoliawater.com www.elgaprocesswater.co.uk
LITR 39001/Rev E: 06/13 In keeping with the progressive nature of the company, we reserve the right to amend details without notice
System Performance