Light in the outdoor area Architectural lighting in outdoor areas is essentially about dealing directly with the effect of the elements, with nature and also with the social realities of towns and cities. On the one hand, this places a lot of responsibility on lighting designers and manufacturers, but, on the other, it also gives them an opportunity to create symbols and images of exceptional visibility and importance. Whoever tries to design light professionally requires a coherent toolbox of lighting technology rather than
decorative products. The ERCO outdoor lighting program provides efficient visual comfort – not only by way of future- proof light sources and control gear but also through optimum and effective lighting technology for a wide variety of applications.
RDS Radio Dimensione Suono headquarters, Rome. Architect: Nigel Ryan. Lighting design: Baldieri, Rome.
Bærum Rådhus, Sandvika. Architect: Magnus Poulsson (1881- 1951). Lighting design: Linda Knoph Vigsnæs, Hvalstad.
Hotel Intercontinental Avenue Marceau, Paris. www.erco.com
ERCO Program 2012
835
Light in the outdoor area Victory Column, Berlin. Restoration and lighting design: Denkmalamt Berlin (Historic Preservation Office).
Miniature of the Brandenburg Gate, Parque Europa, Torrejón de Ardoz.
Expo Shanghai 2010: German Pavilion. Architect and general contractor: Schmidhuber + Kaindl GmbH, Munich. Exhibition and Carrasco International Airport, Montevideo. Architect: Rafael Viñoly, New York. Partner architects: Carla Bechelli Arquitectos, Buenos Aires. Construction management:
836
media design: Milla und Partner GmbH, Stuttgart. Execution and project management: Nüssli (Deutschland) GmbH, Roth.
Lighting design: E³ Ingenieurgesell schaft mbH, Altenbeken; Thomas Roscher, Bonn.
Puerta del Sur S.A. / Corporación América, Arq. Julian M. Evans. Lighting design: Ricardo Hofstadter, Montevideo.
ERCO Program 2012
www.erco.com
Projectors, oodlights and wallwashers Accent lighting with projectors can give a specific emphasis to individual spatial areas or objects in the room. For functional reasons, the extensive range of accessories such as filters and lenses are integrated within the housing. Floodlights with axially symmetrical light distribution are ideal for general lighting, whereas asymmetric floodlights are particularly suited to the even illumination of surfaces. The luminaires’ high cut-off angles ensure very good visual comfort.
Powercast
LED Low-voltage halogen lamps High-pressure discharge lamps
842 845 846
850 851 852
854 856 856
Grasshopper
LED Low-voltage halogen lamps High-pressure discharge lamps
861 864 865
866
867
Beamer
LED Low-voltage halogen lamps PAR lamps High-pressure discharge lamps
871 877 878 879
887
Focalflood
Tungsten halogen lamps High-pressure discharge lamps Fluorescent lamps
Parscoop
Tungsten halogen lamps High-pressure discharge lamps Fluorescent lamps
895 897 899
911
915 918 921
911
917 920 921
New in the program
Powercast 838
www.erco.com
Beamer 869
ERCO Program 2012
837
Powercast Projectors, floodlights, wallwashers Powercast is a universal and economic range of lighting tools for outdoor applications. The projectors, floodlights and wallwashers all feature Spherolit technology for efficient visual comfort. Their system design with a uniform housing shape produces symmetrical light distributions for accent lighting, but also various wide beam distribution patterns. Powercast is a versatile range of luminaires used, for example, for the illumination of vegetation or the washlighting of faรงades. With its multilayer powder- coated surfaces, a lockable hinge, a sturdy mounting bracket, and a double cable entry for through- wiring, Powercast distinguishes itself as an efficient lighting tool that proves easy to install.
Accentuation Emphasis of objects or architectural elements produced by a narrow beam.
Projectors Very narrow to wide beam, rotationally symmetrical light distribution for accent lighting.
LED 13W - 54W 870lm - 4320lm Narrow spot, spot, flood, wide flood Low- voltage halogen lamps 100W 2200lm Narrow spot, spot, flood, wide flood Optional: DALI High- pressure discharge lamps 20W - 250W 1800lm - 23000lm Narrow spot, spot, flood, wide flood
Washlighting Wide- beam illumination of larger objects or spatial zones.
Floodlights Axially symmetrical light distribution with flood characteristics produced by an oval beam for floodlighting.
LED 27W - 54W 1740lm - 4320lm Low- voltage halogen lamps 100W 2200lm Optional: DALI High- pressure discharge lamps 20W - 250W 1800lm - 23000lm
Wallwashing Vertical illuminance for brightening the surroundings and segmenting the exterior landscape.
Lens wallwashers Asymmetrical light distribution for highly uniform wallwashing.
LED 27W - 54W 1740lm - 4320lm
Wallwashers Asymmetrical light distribution for highly uniform wallwashing.
Low- voltage halogen lamps 100W 2200lm Optional: DALI High- pressure discharge lamps 20W - 250W 1800lm - 23000lm
838
ERCO Program 2012
www.erco.com
Powercast Projectors, floodlights, wallwashers
The double cable entry on the housing and an oval hole in the mounting bracket are pro vided to ensure easy throughwiring and efficient installation when connecting a number of lumi naires.
The sturdy pivot bracket with scale ensures a large swivelling range and consistent alignment of the luminaires.
Powercast with mounting bracket can be mounted directly on the floor, wall or ceiling. Alternatively, it can also be fixed to existing poles and cantilevers.
www.erco.com
ERCO Program 2012
839
Powercast Projectors, floodlights, wallwashers
Narrow spot To accentuate smaller objects with high illuminance or to cover considerable distances between luminaire and object. Beam angle: < 10°.
Spot This is the standard character istic for accent lighting for objects of all kinds, especially to reveal the threedimensional shape. Beam angle: 10°–20°.
Flood Used for efficient accentua tion of large objects or to uniformly emphasise a complete spatial zone. Beam angle: 25°–35°.
Wide flood Used for flexible, flooding illumination of surface areas and spatial zones, especially useful for the presentation of goods. Beam angle: > 45°.
Wallwash The light distribution of the lens wallwasher is designed to produce very good uniformity.
Oval flood The oval flood Spherolit lens has an axially symmetrical light intensity distribution, producing an oval beam of approx. 20° to 60°.
LED lighting control The plastic collimating lens designed and produced by ERCO creates a parallel beam, while a further special lens produces the precise beam angle required.
Neutral white Powercast projecters with neutral white ensure superior efficiency with good colour rendering.
Warm white In warm white, Powercast projecters have a somewhat lower luminous efficacy than in neu tral white, but better colour rendition. The warm white light colour is close to that of halogen lamps.
840
ERCO Program 2012
More efficiency with LEDs Changing from low- voltage halogen technology to LED technology roughly triples the effi ciency (lx/W).
QT12- ax, 100W Luminous flux Luminous efficacy Illuminance 4m Beam diameter Efficiency
2200lm 22lm/W 1140lx 0.98m 11lx/W
LED, 27W Luminous flux Luminous efficacy Illuminance 4m Beam diameter Efficiency
1740lm 64lm/W 790lx 1.2m 29lx/W
www.erco.com
Powercast Projectors, floodlights, wallwashers
Spherolit reflectors Spherolit reflectors for lowvoltage halogen lamps and highpressure discharge lamps are used for accent lighting, Narrow spot washlighting and To accentuate wallwashing. smaller objects with high illuminance or to cover considerable distances between luminaire and object. Beam angle: < 10°.
Spot This is the standard character istic for accent lighting for objects of all kinds, especially to reveal the three- dimensional shape. Beam angle: 10°–20°.
Flood Used for efficient accentua tion of large objects or to uniformly emphasise a complete spatial zone. Beam angle: 25°–35°.
Wide flood Used for flexible, flooding illumination of surface areas and spatial zones. Beam angle: > 45°.
Oval flood To provide floodlighting for surfaces and objects. The oval- shaped beam can be swivelled for vertical or horizontal light distribution.
For great flexibility in practical applications, the Spherolit reflector oval flood can be rotated through 360° and fixed at 90° positions. Similar to the use of a sculpture lens, the oval- shaped
beam can be aligned for optimal illumination of the object.
Washlight Wide- beam, asymmetrical light distribution for floodlighting vertical surfaces such as façades, walls or hedges.
www.erco.com
The housing swings open for easy lamp or reflector change. The Spherolit
reflector can be replaced without tools.
The Powercast wallwasher with Spherolit reflector washlight can be tilted for uniform brightness distribution on vertical surfaces.
ERCO Program 2012
841
Powercast Projector with LED Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic control gear. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Screw-mounted cover with safety glass:
h(m) 402 46666666 3
Weight 4.50kg LMF E krrIP65
∅ 194 466 3
34255.000 Graphit m LED 13W 1080lm 4000K neutral white Version 3 Spherolit lens, narrow spot Maximum wind load area 0.063m2
138 46 3
LED
216 4666 3
LED
216 4666 3
LED
ERCO Program 2012
E(lx) D(m) 7° 15226 0.24 3806 0.49 1692 0.73 952 0.98 609 1.22
2 4 6 8 10
30°
70000 cd
30°
2 4 6 8 10
30°
402 46666666 3
∅ 194 466 3
60°
20000 cd
30°
30°
402 46666666 3
60°
20000 cd
402 46666666 3
60°
LED
402 46666666 3 216 4666 3
30°
30°
60°
9000 cd
60°
LED
E(lx) D(m) 7° 12265 0.24 3066 0.49 1363 0.73 767 0.98 491 1.22
corrosion-resistant cast aluminium, double powder-coated. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 849
2 4 6 8 10
2 4 6 8 10
30°
2 4 6 8 10 h(m)
138 46 3
842
30°
60°
60°
LED
216 4666 3
∅ 194 466 3
Weight 4.50kg LMF E I5 krrIP65
70000 cd
D(m) 6° 0.21 0.42 0.63 0.84 1.05
h(m)
h(m)
138 46 3
34244.000 Graphit m LED 27W 1740lm 3000K warm white Version 3 Spherolit lens, flood Maximum wind load area 0.063m2
60°
60°
LED
216 4666 3
∅ 194 466 3
Weight 4.50kg LMF E I5 krrIP65
30°
30°
E(lx) 8344 2086 927 522 334
h(m)
138 46 3
34245.000 Graphit m LED 27W 2160lm 4000K neutral white Version 3 Spherolit lens, flood Maximum wind load area 0.063m2
216 4666 3
∅ 194 466 3
Weight 4.50kg LMF E I5 krrIP65
55000 cd
E(lx) D(m) 6° 10358 0.21 2590 0.42 1151 0.63 647 0.84 414 1.05
2 4 6 8 10
h(m)
138 46 3
34242.000 Graphit m LED 27W 1740lm 3000K warm white Version 3 Spherolit lens, spot Maximum wind load area 0.063m2
30°
60°
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic control gear. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Screw-mounted cover with safety glass: Weight 4.50kg LMF E I5 krrIP65
30°
60°
60°
402 46666666 3 138 46 3
34243.000 Graphit m LED 27W 2160lm 4000K neutral white Version 3 Spherolit lens, spot Maximum wind load area 0.063m2
55000 cd
2 4 6 8 10
h(m) ∅ 194 466 3
Weight 4.50kg LMF E krrIP65
30°
60°
402 46666666 3 138 46 3
34290.000 Graphit m LED 20W 1305lm 3000K warm white Version 3 Spherolit lens, narrow spot Maximum wind load area 0.063m2
216 4666 3
∅ 194 466 3
Weight 4.50kg LMF E krrIP65
LED
60°
h(m)
138 46 3
34291.000 Graphit m LED 20W 1620lm 4000K neutral white Version 3 Spherolit lens, narrow spot Maximum wind load area 0.063m2
60°
402 46666666 3
Weight 4.50kg LMF E krrIP65
216 4666 3
∅ 194 466 3
34254.000 Graphit m LED 13W 870lm 3000K warm white Version 3 Spherolit lens, narrow spot Maximum wind load area 0.063m2
corrosion-resistant cast aluminium, double powder-coated. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 849
30°
60°
9000 cd
30°
2 4 6 8 10
E(lx) 3921 980 436 245 157 E(lx) 3158 790 351 197 126 E(lx) 1520 380 169 95 61 E(lx) 1224 306 136 77 49
D(m) 17° 0.60 1.20 1.79 2.39 2.99 D(m) 17° 0.60 1.20 1.79 2.39 2.99 D(m) 28° 1.00 1.99 2.99 3.99 4.99 D(m) 28° 1.00 1.99 2.99 3.99 4.99
www.erco.com
Weight 4.50kg LMF E I5 krrIP65
∅ 194 466 3
34247.000 Graphit m LED 27W 2160lm 4000K neutral white Version 3 Spherolit lens, wide flood Maximum wind load area 0.063m2
402 46666666 3
Powercast Projector with LED
Weight 4.50kg LMF E I5 krrIP65
∅ 194 466 3
34246.000 Graphit m LED 27W 1740lm 3000K warm white Version 3 Spherolit lens, wide flood Maximum wind load area 0.063m2
138 46 3
402 46666666 3 402 46666666 3 402 46666666 3
LED
216 4666 3
LED
E(lx)
2 4 6 8 10
618 154 69 39 25
h(m)
E(lx)
2 4 6 8 10
30°
2 4 6 8 10
30°
60°
12500 cd
30°
2 4 6 8 10
30°
60°
12500 cd
30°
2 4 6 8 10
30°
60°
5500 cd
30°
30°
60°
5500 cd
30°
522 4666666666 3
∅ 264 46666 3
522 4666666666 3 290 46666 3
30°
60°
140000 cd
60°
LED
E(lx) 4472 1118 497 279 179 E(lx) 2343 586 260 146 94 E(lx) 1887 472 210 118 75 E(lx) 1012 253 112 63 40
h(m)
E(lx)
2 4 6 8 10
815 204 91 51 33
D(m) 40° 1.46 2.91 4.37 5.82 7.28 D(m) 40° 1.46 2.91 4.37 5.82 7.28 D(m) 17° 0.60 1.20 1.79 2.39 2.99 D(m) 17° 0.60 1.20 1.79 2.39 2.99 D(m) 29° 1.03 2.07 3.10 4.14 5.17 D(m) 29° 1.03 2.07 3.10 4.14 5.17 D(m) 46° 1.70 3.40 5.09 6.79 8.49 D(m) 46° 1.70 3.40 5.09 6.79 8.49
corrosion-resistant cast aluminium, double powder-coated. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 849
60°
LED
5551 1388 617 347 222
2 4 6 8 10
30°
2 4 6 8 10 h(m)
4178 663 www.erco.com
290 46666 3
∅ 264 46666 3
Weight 8.00kg LMF E krrIP65
h(m)
h(m)
4178 663 34296.000 Graphit m LED 36W 2320lm 3000K warm white Version 3 Spherolit lens, narrow spot Maximum wind load area 0.119m2
27500 cd
60°
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic control gear. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Screw-mounted cover with safety glass: Weight 8.00kg LMF E krrIP65
30°
60°
402 46666666 3 138 46 3
34297.000 Graphit m LED 36W 2880lm 4000K neutral white Version 3 Spherolit lens, narrow spot Maximum wind load area 0.119m2
30°
60°
60°
LED
216 4666 3
∅ 194 466 3
Weight 4.50kg LMF E krrIP65
27500 cd
767 192 85 48 31
h(m)
138 46 3
34306.000 Graphit m LED 40W 2610lm 3000K warm white Version 3 Spherolit lens, wide flood Maximum wind load area 0.063m2
60°
60°
LED
216 4666 3
∅ 194 466 3
Weight 4.50kg LMF E krrIP65
30°
30°
2 4 6 8 10
h(m)
138 46 3
34307.000 Graphit m LED 40W 3240lm 4000K neutral white Version 3 Spherolit lens, wide flood Maximum wind load area 0.063m2
5000 cd
60°
LED
216 4666 3
∅ 194 466 3
Weight 4.50kg LMF E krrIP65
60°
E(lx)
h(m)
138 46 3
34304.000 Graphit m LED 40W 2610lm 3000K warm white Version 3 Spherolit lens, flood Maximum wind load area 0.063m2
LED
216 4666 3
∅ 194 466 3
Weight 4.50kg LMF E krrIP65
30°
30°
h(m)
h(m)
138 46 3
34305.000 Graphit m LED 40W 3240lm 4000K neutral white Version 3 Spherolit lens, flood Maximum wind load area 0.063m2
5000 cd
60°
402 46666666 3
Weight 4.50kg LMF E krrIP65
30°
60°
60°
LED
216 4666 3
∅ 194 466 3
34302.000 Graphit m LED 40W 2610lm 3000K warm white Version 3 Spherolit lens, spot Maximum wind load area 0.063m2
216 4666 3
∅ 194 466 3
Weight 4.50kg LMF E krrIP65
LED
402 46666666 3
138 46 3
34303.000 Graphit m LED 40W 3240lm 4000K neutral white Version 3 Spherolit lens, spot Maximum wind load area 0.063m2
216 4666 3
402 46666666 3
138 46 3
60°
30°
60°
140000 cd
30°
2 4 6 8 10
E(lx) D(m) 7° 29145 0.24 7286 0.49 3238 0.73 1822 0.98 1166 1.22 E(lx) D(m) 7° 23478 0.24 5869 0.49 2609 0.73 1467 0.98 939 1.22
ERCO Program 2012
843
Powercast Projector with LED Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic control gear. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Screw-mounted cover with safety glass:
h(m) 522 4666666666 3
Weight 8.00kg LMF E krrIP65
∅ 264 46666 3
34309.000 Graphit m LED 54W 4320lm 4000K neutral white Version 3 Spherolit lens, spot Maximum wind load area 0.119m2
4178 663
30°
30°
522 4666666666 3
60°
17500 cd
522 4666666666 3
60°
LED 522 4666666666 3
290 46666 3
30°
2 4 6 8 10
30°
60°
17500 cd
30°
2 4 6 8 10
60°
LED
30°
60°
7500 cd
30°
2 4 6 8 10
522 4666666666 3
h(m) ∅ 264 46666 3
Weight 8.00kg LMF E krrIP65
40000 cd
2 4 6 8 10
h(m)
4178 663 34312.000 Graphit m LED 54W 3480lm 3000K warm white Version 3 Spherolit lens, wide flood Maximum wind load area 0.119m2
30°
60°
60°
LED
290 46666 3
∅ 264 46666 3
Weight 8.00kg LMF E krrIP65
30°
h(m)
4178 663 34313.000 Graphit m LED 54W 4320lm 4000K neutral white Version 3 Spherolit lens, wide flood Maximum wind load area 0.119m2
40000 cd
60°
LED
290 46666 3
∅ 264 46666 3
Weight 8.00kg LMF E krrIP65
30°
2 4 6 8 10
h(m)
4178 663 34310.000 Graphit m LED 54W 3480lm 3000K warm white Version 3 Spherolit lens, flood Maximum wind load area 0.119m2
290 46666 3
∅ 264 46666 3
Weight 8.00kg LMF E krrIP65
LED
60°
h(m)
4178 663 34311.000 Graphit m LED 54W 4320lm 4000K neutral white Version 3 Spherolit lens, flood Maximum wind load area 0.119m2
60°
522 4666666666 3
Weight 8.00kg LMF E krrIP65
290 46666 3
∅ 264 46666 3
34308.000 Graphit m LED 54W 3480lm 3000K warm white Version 3 Spherolit lens, spot Maximum wind load area 0.119m2
corrosion-resistant cast aluminium, double powder-coated. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 849
4178 663
290 46666 3
60°
LED
30°
60°
7500 cd
30°
2 4 6 8 10
E(lx) 8018 2004 891 501 321 E(lx) 6459 1615 718 404 258 E(lx) 3307 827 367 207 132 E(lx) 2664 666 296 167 107 E(lx) 1371 343 152 86 55 E(lx) 1105 276 123 69 44
D(m) 16° 0.56 1.12 1.69 2.25 2.81 D(m) 16° 0.56 1.12 1.69 2.25 2.81 D(m) 29° 1.03 2.07 3.10 4.14 5.17 D(m) 29° 1.03 2.07 3.10 4.14 5.17 D(m) 46° 1.70 3.40 5.09 6.79 8.49 D(m) 46° 1.70 3.40 5.09 6.79 8.49
Fitted with Spherolit reflectors or lenses, the Powercast range provides the right light distribution for a multitude of lighting applications in the outdoor area – from efficient wallwashers to the precise spot version.
844
ERCO Program 2012
www.erco.com
Powercast Projector for low-voltage halogen lamps Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic transformer 230/240/12V. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. Fitting the mounting bracket to the housing must be done on site. Use dimmers for electronic transformers (trailing edge).
h(m) 402 46666666 3
Weight 4.60kg LMF E I krrIP65
∅ 194 466 3
34219.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm Spherolit reflector, narrow spot Maximum wind load area 0.063m2
138 46 3
25000 cd
30°
30°
402 46666666 3
60°
6000 cd
60°
QT12-ax
30°
30°
60°
2250 cd
30°
402 46666666 3
∅ 194 466 3
216 4666 3
402 46666666 3 216 4666 3
30°
60°
120000 cd
60°
QT12-ax
E(lx) 4560 1140 507 285 182 E(lx) 1010 252 112 63 40
h(m)
E(lx)
2 4 6 8 10
327 82 36 20 13
D(m) 14° 0.49 0.98 1.47 1.96 2.46 D(m) 33° 1.18 2.37 3.55 4.74 5.92 D(m) 68° 2.70 5.40 8.09 10.79 13.49
double powder-coated. Hinge open for lamp replacement. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 849
60°
QT12-ax
E(lx) D(m) 6° 0.21 0.42 0.63 0.84 1.05
24885 6221 2765 1555 995
2 4 6 8 10
30°
2 4 6 8 10 h(m)
138 46 3
www.erco.com
216 4666 3
∅ 194 466 3
Weight 4.70kg LMF E krrIP65
30°
2 4 6 8 10
h(m)
138 46 3
34224.000 Graphit m DALI QT12-ax 100W 12V GY6.35 2200lm Spherolit reflector, spot Maximum wind load area 0.063m2
QT12-ax
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic transformer, 230-240/12V, with plug and play connectivity. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium,
DALI PLUG+ PLAY
Weight 4.70kg LMF E krrIP65
30°
60°
60°
402 46666666 3 138 46 3
34225.000 Graphit m DALI QT12-ax 100W 12V GY6.35 2200lm Spherolit reflector, narrow spot Maximum wind load area 0.063m2
120000 cd
60°
QT12-ax
216 4666 3
∅ 194 466 3
Weight 4.60kg LMF E I krrIP65
30°
2 4 6 8 10
h(m)
138 46 3
34221.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm Spherolit reflector, wide flood Maximum wind load area 0.063m2
216 4666 3
∅ 194 466 3
Weight 4.60kg LMF E I krrIP65
QT12-ax
60°
h(m)
138 46 3
34220.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm Spherolit reflector, flood Maximum wind load area 0.063m2
60°
402 46666666 3
Weight 4.60kg LMF E I krrIP65
216 4666 3
∅ 194 466 3
34218.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm Spherolit reflector, spot Maximum wind load area 0.063m2
Protection mode IP65: dust-proof and water jet-proof. Accessories page 849
30°
60°
25000 cd
30°
2 4 6 8 10
E(lx) D(m) 6° 24885 0.21 6221 0.42 2765 0.63 1555 0.84 995 1.05 E(lx) 4560 1140 507 285 182
ERCO Program 2012
D(m) 14° 0.49 0.98 1.47 1.96 2.46
845
Powercast Projector for low-voltage halogen lamps h(m) 402 46666666 3
Weight 4.70kg LMF E krrIP65
∅ 194 466 3
34226.000 Graphit m DALI QT12-ax 100W 12V GY6.35 2200lm Spherolit reflector, flood Maximum wind load area 0.063m2
Weight 4.70kg LMF E krrIP65
∅ 194 466 3
34227.000 Graphit m DALI QT12-ax 100W 12V GY6.35 2200lm Spherolit reflector, wide flood Maximum wind load area 0.063m2
216 4666 3
QT12-ax
402 46666666 3
138 46 3
60°
138 46 3
216 4666 3
30°
60°
6000 cd
60°
QT12-ax
30°
30°
60°
2250 cd
30°
E(lx)
2 4 6 8 10
1010 252 112 63 40
h(m)
E(lx)
2 4 6 8 10
327 82 36 20 13
D(m) 33° 1.18 2.37 3.55 4.74 5.92 D(m) 68° 2.70 5.40 8.09 10.79 13.49
Powercast Projector for metal halide lamps Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic control gear. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement.
h(m) 402 46666666 3
Weight 4.65kg LMF E I5 krrIP65
∅ 194 466 3
34203.000 Graphit m ECG HIT-TC-CE 20W GU6.5 1800lm Spherolit reflector, narrow spot Maximum wind load area 0.063m2
138 46 3
402 46666666 3
HIT-TC-CE
216 4666 3
∅ 194 466 3
Weight 4.65kg LMF E I5 krrIP65
138 46 3
HIT-TC-CE
216 4666 3
ERCO Program 2012
30°
60°
17000 cd
30°
HIT-TC-CE
30°
30°
60°
4500 cd
60°
402 46666666 3 138 46 3
846
30°
2 4 6 8 10
30°
60°
1750 cd
30°
216 4666 3
E(lx) 3637 909 404 227 145
h(m)
E(lx)
2 4 6 8 10
861 215 96 54 34
h(m)
E(lx)
2 4 6 8 10
268 67 30 17 11
D(m) 15° 0.53 1.05 1.58 2.11 2.63 D(m) 33° 1.18 2.37 3.55 4.74 5.92 D(m) 69° 2.75 5.50 8.25 11.00 13.75
double powder-coated. Hinge open for lamp replacement. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 849
60°
HIT-CE
E(lx) D(m) 6° 23913 0.21 5978 0.42 2657 0.63 1495 0.84 957 1.05
2 4 6 8 10
h(m) ∅ 194 466 3
Weight 5.40kg LMF E I5 krrIP65
100000 cd
60°
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Control gear 230V, 50Hz, with temperature controller, timed-ignitor, capacitor. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, 34204.000 Graphit m HIT-CE 35W G12 3300lm Spherolit reflector, narrow spot Maximum wind load area 0.063m2
30°
60°
402 46666666 3
138 46 3
34209.000 Graphit m ECG HIT-TC-CE 20W GU6.5 1800lm Spherolit reflector, wide flood Maximum wind load area 0.063m2
216 4666 3
∅ 194 466 3
Weight 4.65kg LMF E I5 krrIP65
HIT-TC-CE
60°
h(m)
138 46 3
34206.000 Graphit m ECG HIT-TC-CE 20W GU6.5 1800lm Spherolit reflector, flood Maximum wind load area 0.063m2
60°
402 46666666 3
Weight 4.65kg LMF E I5 krrIP65
216 4666 3
∅ 194 466 3
34200.000 Graphit m ECG HIT-TC-CE 20W GU6.5 1800lm Spherolit reflector, spot Maximum wind load area 0.063m2
Reflector replacement without tools: aluminium, silver, mirror-finish anodised. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 849
30°
60°
150000 cd
30°
2 4 6 8 10
E(lx) D(m) 7° 31088 0.24 7772 0.49 3454 0.73 1943 0.98 1244 1.22
www.erco.com
Powercast Projector for metal halide lamps h(m) 402 46666666 3
Weight 5.40kg LMF E I5 krrIP65
∅ 194 466 3
34201.000 Graphit m HIT-CE 35W G12 3300lm Spherolit reflector, spot Maximum wind load area 0.063m2
138 46 3
402 46666666 3 402 46666666 3
HIT-CE
216 4666 3
HIT-CE
E(lx)
2 4 6 8 10
521 130 58 33 21
50000 cd
30°
30°
60°
18000 cd
30°
30°
60°
7000 cd
30°
522 4666666666 3
∅ 264 46666 3
522 4666666666 3 522 4666666666 3 290 46666 3
30°
60°
350000 cd
30°
30°
60°
125000 cd
60°
HIT-CE
D(m) 32° 1.15 2.29 3.44 4.59 5.73 D(m) 63° 2.45 4.90 7.35 9.80 12.26
E(lx) D(m) 7° 0.24 0.49 0.73 0.98 1.22
38871 9718 4319 2429 1555
h(m)
E(lx) D(m) 17° 10621 0.60 2655 1.20 1180 1.79 664 2.39 425 2.99
2 4 6 8 10
E(lx)
2 4 6 8 10
3065 766 341 192 123
h(m)
E(lx)
2 4 6 8 10
989 247 110 62 40
D(m) 33° 1.18 2.37 3.55 4.74 5.92 D(m) 65° 2.55 5.10 7.64 10.19 12.74
double powder-coated. Hinge open for lamp replacement. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 849
60°
HIT-CE
D(m) 16° 0.56 1.12 1.69 2.25 2.81
2 4 6 8 10
2 4 6 8 10
30°
2 4 6 8 10 h(m)
4178 663 www.erco.com
30°
30°
60°
60°
HIT-CE
290 46666 3
∅ 264 46666 3
Weight 8.80kg LMF E 5 krrIP65
180000 cd
E(lx)
h(m)
h(m)
4178 663 34232.000 Graphit m HIT-CE 150W G12 14000lm Spherolit reflector, flood Maximum wind load area 0.119m2
290 46666 3
∅ 264 46666 3
Weight 8.80kg LMF E 5 krrIP65
30°
5921 1480 658 370 237
1599 400 178 100 64
h(m)
4178 663 34230.000 Graphit m HIT-CE 150W G12 14000lm Spherolit reflector, spot Maximum wind load area 0.119m2
30°
60°
60°
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Control gear 230V, 50Hz, with temperature controller, timed-ignitor, capacitor. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, Weight 8.80kg LMF E 5 krrIP65
3500 cd
60°
402 46666666 3 138 46 3
34231.000 Graphit m HIT-CE 150W G12 14000lm Spherolit reflector, narrow spot Maximum wind load area 0.119m2
60°
60°
HIT-CE
216 4666 3
∅ 194 466 3
Weight 5.80kg LMF E I5 krrIP65
30°
30°
E(lx)
2 4 6 8 10
h(m)
138 46 3
34211.000 Graphit m HIT-CE 70W G12 6600lm Spherolit reflector, wide flood Maximum wind load area 0.063m2
HIT-CE
216 4666 3
∅ 194 466 3
Weight 5.80kg LMF E I5 krrIP65
9000 cd
60°
402 46666666 3 138 46 3
34208.000 Graphit m HIT-CE 70W G12 6600lm Spherolit reflector, flood Maximum wind load area 0.063m2
30°
60°
60°
HIT-CE
216 4666 3
∅ 194 466 3
Weight 5.80kg LMF E I5 krrIP65
30°
2 4 6 8 10
h(m)
138 46 3
34202.000 Graphit m HIT-CE 70W G12 6600lm Spherolit reflector, spot Maximum wind load area 0.063m2
HIT-CE
216 4666 3
∅ 194 466 3
Weight 5.80kg LMF E I5 krrIP65
30000 cd
60°
402 46666666 3 138 46 3
34205.000 Graphit m HIT-CE 70W G12 6600lm Spherolit reflector, narrow spot Maximum wind load area 0.063m2
216 4666 3
∅ 194 466 3
Weight 5.40kg LMF E I5 krrIP65
30°
60°
h(m)
138 46 3
34210.000 Graphit m HIT-CE 35W G12 3300lm Spherolit reflector, wide flood Maximum wind load area 0.063m2
HIT-CE
402 46666666 3
Weight 5.40kg LMF E I5 krrIP65
∅ 194 466 3
34207.000 Graphit m HIT-CE 35W G12 3300lm Spherolit reflector, flood Maximum wind load area 0.063m2
216 4666 3
60°
30°
60°
40000 cd
30°
2 4 6 8 10
E(lx) D(m) 7° 78890 0.24 19723 0.49 8766 0.73 4931 0.98 3156 1.22 E(lx) D(m) 16° 24662 0.56 6165 1.12 2740 1.69 1541 2.25 986 2.81 E(lx) 6477 1619 720 405 259
ERCO Program 2012
D(m) 33° 1.18 2.37 3.55 4.74 5.92
847
Powercast Projector for metal halide lamps h(m) 522 4666666666 3
Weight 8.80kg LMF E 5 krrIP65
∅ 264 46666 3
34233.000 Graphit m HIT-CE 150W G12 14000lm Spherolit reflector, wide flood Maximum wind load area 0.119m2
Weight 10.00kg LMF E 5 krrIP65
∅ 264 46666 3
34237.000 Graphit m HIT-CE 250W G12 23000lm Spherolit reflector, narrow spot Maximum wind load area 0.119m2
4178 663
60°
500000 cd
60°
HIT-CE 522 4666666666 3
290 46666 3
30°
h(m)
E(lx) D(m) 8° 104082 0.28 26020 0.56 11565 0.84 6505 1.12 4163 1.40
2 4 6 8 10
30°
60°
200000 cd
30°
2 4 6 8 10
60°
HIT-CE
30°
60°
60000 cd
30°
2 4 6 8 10
522 4666666666 3
h(m) ∅ 264 46666 3
Weight 10.00kg LMF E 5 krrIP65
30°
30°
4178 663
290 46666 3
60°
HIT-CE
30°
60°
25000 cd
30°
D(m) 66° 2.60 5.20 7.79 10.39 12.99
2176 544 242 136 87
h(m)
4178 663 34239.000 Graphit m HIT-CE 250W G12 23000lm Spherolit reflector, wide flood Maximum wind load area 0.119m2
HIT-CE
290 46666 3
∅ 264 46666 3
Weight 10.00kg LMF E 5 krrIP65
15000 cd
E(lx)
2 4 6 8 10
h(m)
4178 663 34238.000 Graphit m HIT-CE 250W G12 23000lm Spherolit reflector, flood Maximum wind load area 0.119m2
30°
60°
60°
522 4666666666 3
Weight 10.00kg LMF E 5 krrIP65
HIT-CE
290 46666 3
∅ 264 46666 3
34236.000 Graphit m HIT-CE 250W G12 23000lm Spherolit reflector, spot Maximum wind load area 0.119m2
290 46666 3
522 4666666666 3
4178 663
60°
2 4 6 8 10
E(lx) D(m) 16° 38298 0.56 9574 1.12 4255 1.69 2394 2.25 1532 2.81 E(lx) D(m) 33° 1.18 2.37 3.55 4.74 5.92
10392 2598 1155 649 416 E(lx) 3608 902 401 226 144
D(m) 66° 2.60 5.20 7.79 10.39 12.99
With Spherolit reflector in washlight version, the Powercast wallwashers are ideal for vertical illuminance in the outdoor area – a key factor in ensuring efficient visual comfort.
848
ERCO Program 2012
www.erco.com
34276.000 34280.000 Spherolit reflector, spot Reflector replacement without tools: aluminium, silver, mirror-finish anodised.
• • •
• • • •
34277.000 34281.000 Spherolit reflector, flood Reflector replacement without tools: aluminium, silver, mirror-finish anodised.
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• • • • • •
• •
• •
• •
• •
• •
• •
• • •
• •
• • •
• • • • •
• •
• • •
• •
34278.000 34282.000 Spherolit reflector, wide flood Reflector replacement without tools: aluminium, silver, mirror-finish anodised.
34262.000 Skintone filter
34264.000 Daylight conversion filter
34266.000 Colour filter Magenta
00 5 .0
00 97
97
4 .0
00
34
• •
26
1 .0
00 0 .0
00 34
26
2 .0
00 34
27
0 .0
00 34
27
8 .0
00 34
26
6 .0
00 34
26
34
26
4 .0
00 2 .0
00 26
2 .0
00 34
34
28
8 .0
00
• •
• •
33
• • •
27
1 .0
00 34
28
7 .0 27
•
• •
34
• •
00
• • •
• • •
• • •
34
34
28
0 .0
00 6 .0
00 34
27
9 .0
•
• • • • • • • • •
• • • • •
• • •
• • • • •
• • • • • •
• • • • • • • • •
• • • • • • •
34275.000 34279.000 Spherolit reflector, narrow spot Reflector replacement without tools: aluminium, silver, mirror-finish anodised.
www.erco.com
27
• • •
34
34200.000 34201.000 34202.000 34203.000 34204.000 34205.000 34206.000 34207.000 34208.000 34209.000 34210.000 34211.000 34218.000 34219.000 34220.000 34221.000 34224.000 34225.000 34226.000 34227.000 34230.000 34231.000 34232.000 34233.000 34236.000 34237.000 34238.000 34239.000 34242.000 34243.000 34244.000 34245.000 34246.000 34247.000 34254.000 34255.000 34290.000 34291.000 34296.000 34297.000 34302.000 34303.000 34304.000 34305.000 34306.000 34307.000 34308.000 34309.000 34310.000 34311.000 34312.000 34313.000
34
34
27
5 .0
00
Powercast Accessories
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
34268.000 Colour filter Amber
ERCO Program 2012
849
Powercast Accessories ∅ 83
502 6466666666 3
3664 6666
∅ 60
6663664
34270.000 Colour filter Sky blue
34272.000 Colour filter Night blue
34260.000 34261.000 Anti-glare cylinder Metal, black.
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
Powercast Floodlight with LED
Weight 4.50kg LMF E krrIP65
∅ 194 466 3
34257.000 Graphit m LED 27W 2160lm 4000K neutral white Version 3 Spherolit lens, oval flood Maximum wind load area 0.063m2
402 46666666 3
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic control gear. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Lens rotatable through 360°.
Weight 4.50kg LMF E krrIP65
∅ 194 466 3
34256.000 Graphit m LED 27W 1740lm 3000K warm white Version 3 Spherolit lens, oval flood Maximum wind load area 0.063m2
∅ 194 466 3
Weight 4.50kg LMF E krrIP65
138 46 3
850
ERCO Program 2012
LED
216 4666 3
216 4666 3
30°
60°
7500 cd
60°
30°
LED
30°
7500 cd
30°
30°
60°
9000 cd
60°
LED
30°
60°
60°
402 46666666 3
138 46 3
34292.000 Graphit m LED 40W 2610lm 3000K warm white Version 3 Spherolit lens, oval flood Maximum wind load area 0.063m2
216 4666 3
∅ 194 466 3
Weight 4.50kg LMF E krrIP65
LED
402 46666666 3
138 46 3
34293.000 Graphit m LED 40W 3240lm 4000K neutral white Version 3 Spherolit lens, oval flood Maximum wind load area 0.063m2
216 4666 3
60°
402 46666666 3
138 46 3
Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 854
30°
60°
9000 cd
30°
h(m) E(lx) D(m) 51° 1 4791 0.95 2 1198 1.91 3 532 2.86 4 299 3.82 5 192 4.77
18° 0.32 0.63 0.95 1.27 1.58
h(m) E(lx) D(m) 51° 1 3859 0.95 2 965 1.91 3 429 2.86 4 241 3.82 5 154 4.77
18° 0.32 0.63 0.95 1.27 1.58
h(m) E(lx) D(m) 50° 1 6696 0.93 2 1674 1.87 3 744 2.80 4 418 3.73 5 268 4.66
18° 0.32 0.63 0.95 1.27 1.58
h(m) E(lx) D(m) 50° 1 5394 0.93 2 1348 1.87 3 599 2.80 4 337 3.73 5 216 4.66
18° 0.32 0.63 0.95 1.27 1.58
www.erco.com
Powercast Floodlight with LED
Weight 8.00kg LMF E krrIP65
∅ 264 46666 3
34299.000 Graphit m LED 54W 4320lm 4000K neutral white Version 3 Spherolit lens, oval flood Maximum wind load area 0.119m2
522 4666666666 3
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic control gear. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Lens rotatable through 360°.
Weight 8.00kg LMF E krrIP65
∅ 264 46666 3
34298.000 Graphit m LED 54W 3480lm 3000K warm white Version 3 Spherolit lens, oval flood Maximum wind load area 0.119m2
290 46666 3
60°
LED 522 4666666666 3
4178 663
4178 663
290 46666 3
Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 854
30°
60°
12500 cd
60°
LED
30°
30°
60°
12500 cd
30°
h(m) E(lx) D(m) 51° 1 8937 0.95 2 2234 1.91 3 993 2.86 4 559 3.82 5 357 4.77
18° 0.32 0.63 0.95 1.27 1.58
h(m) E(lx) D(m) 51° 1 7199 0.95 2 1800 1.91 3 800 2.86 4 450 3.82 5 288 4.77
18° 0.32 0.63 0.95 1.27 1.58
Powercast Floodlight for low-voltage halogen lamps
4663
Weight 4.60kg LMF E I krrIP65
∅ 194
34222.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm Spherolit reflector, oval flood Maximum wind load area 0.063m2
402 46666666 3
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic transformer 230/240/12V. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Concealed fixing ring for accessories. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. 90° rotation. Fitting the mounting bracket to the housing must be done on site. Use dimmers for electronic transformers (trailing edge).
138 46 3
138 46 3
www.erco.com
QT12-ax
402 46666666 3
4663
∅ 194
Weight 4.70kg LMF E krrIP65
60°
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic transformer, 230-240/12V, with plug and play connectivity. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for
DALI PLUG+ PLAY
34228.000 Graphit m DALI QT12-ax 100W 12V GY6.35 2200lm Spherolit reflector, oval flood Maximum wind load area 0.063m2
216 4666 3
216 4666 3
Protection mode IP65: dust-proof and water jet-proof. Accessories page 854
30°
60°
3000 cd
39° 0.71 1.42 2.12 2.83 3.54
lamp replacement. Concealed fixing ring for accessories. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. 90° rotation. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 854
60°
QT12-ax
30°
h(m) E(lx) D(m) 107° 1 1037 2.70 2 259 5.41 3 115 8.11 4 65 10.81 5 41 13.51
30°
60°
3000 cd
30°
h(m) E(lx) D(m) 107° 1 1037 2.70 2 259 5.41 3 115 8.11 4 65 10.81 5 41 13.51
ERCO Program 2012
39° 0.71 1.42 2.12 2.83 3.54
851
Powercast Floodlight for metal halide lamps
Weight 4.65kg LMF E I5 krrIP65
∅ 194 466 3
34212.000 Graphit m ECG HIT-TC-CE 20W GU6.5 1800lm Spherolit reflector, oval flood Maximum wind load area 0.063m2
402 46666666 3
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic control gear. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for
138 46 3
216 4666 3
60°
HIT-TC-CE
∅ 194 466 3
Weight 5.40kg LMF E I5 krrIP65
402 46666666 3
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Control gear 230V, 50Hz, with temperature controller, timed-ignitor, capacitor. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Concealed fixing ring for accessories. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. 90° rotation. Fitting the mounting bracket to the housing must be done on site. 34213.000 Graphit m HIT-CE 35W G12 3300lm Spherolit reflector, oval flood Maximum wind load area 0.063m2
Weight 5.80kg LMF E I5 krrIP65
∅ 194 466 3
34214.000 Graphit m HIT-CE 70W G12 6600lm Spherolit reflector, oval flood Maximum wind load area 0.063m2
138 46 3
852
ERCO Program 2012
216 4666 3
216 4666 3
30°
60°
2500 cd
HIT-CE
30°
60°
4000 cd
60°
HIT-CE
30°
h(m) E(lx) D(m) 104° 1 946 2.56 2 237 5.12 3 105 7.68 4 59 10.24 5 38 12.80
38° 0.69 1.38 2.07 2.75 3.44
Protection mode IP65: dust-proof and water jet-proof. Accessories page 854
60°
402 46666666 3
138 46 3
lamp replacement. Concealed fixing ring for accessories. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. 90° rotation. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 854
30°
30°
60°
6000 cd
30°
h(m) E(lx) D(m) 104° 1 1882 2.56 2 470 5.12 3 209 7.68 4 118 10.24 5 75 12.80
36° 0.65 1.30 1.95 2.60 3.25
h(m) E(lx) D(m) 104° 1 3557 2.56 2 889 5.12 3 395 7.68 4 222 10.24 5 142 12.80
37° 0.67 1.34 2.01 2.68 3.35
www.erco.com
Powercast Floodlight for metal halide lamps
Weight 8.80kg LMF E 5 krrIP65
∅ 264 46666 3
34234.000 Graphit m HIT-CE 150W G12 14000lm Spherolit reflector, oval flood Maximum wind load area 0.119m2
522 4666666666 3
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Control gear 230V, 50Hz, with temperature controller, timed-ignitor, capacitor. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Concealed fixing ring for accessories. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. 90° rotation. Fitting the mounting bracket to the housing must be done on site.
4178 663
HIT-CE
30°
60°
14000 cd
30°
h(m) E(lx) D(m) 118° 1 5891 3.33 2 1473 6.66 3 655 9.99 4 368 13.31 5 236 16.64 h(m)
4178 663
www.erco.com
60°
522 4666666666 3
Weight 10.00kg LMF E 5 krrIP65
∅ 264 46666 3
34240.000 Graphit m HIT-CE 250W G12 23000lm Spherolit reflector, oval flood Maximum wind load area 0.119m2
290 46666 3
Protection mode IP65: dust-proof and water jet-proof. Accessories page 854
290 46666 3
60°
HIT-CE
30°
60°
18000 cd
30°
1 2 3 4 5
50° 0.93 1.87 2.80 3.73 4.66
E(lx) D(m) 116° 50° 10276 3.20 0.93 2569 6.40 1.87 1142 9.60 2.80 642 12.80 3.73 411 16.00 4.66
ERCO Program 2012
853
34283.000 34284.000 Softec lens
00 5 .0
00 33
97
34
97
4 .0
00 2 .0
00 34
27
0 .0
00 34
27
34
26
8 .0
00 6 .0
00 26 34
26
4 .0
00 2 .0
00 26
4 .0 28
34
• • • • •
34
34212.000 34213.000 34214.000 34222.000 34228.000 34234.000 34240.000 34256.000 34257.000 34292.000 34293.000 34298.000 34299.000
34
34
28
3 .0
00
Powercast Accessories
• •
• •
• •
• •
• •
• •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
•
34262.000 Skintone filter
34264.000 Daylight conversion filter
34266.000 Colour filter Magenta
34268.000 Colour filter Amber
34270.000 Colour filter Sky blue
34272.000 Colour filter Night blue
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
∅ 83
502
64666666663
3664 6666
∅ 60
6663664
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
Powercast Lens wallwasher with LED Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic control gear. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Screw-mounted cover with safety glass:
138 46 3
854
ERCO Program 2012
Mean illuminance En (wall) Angle of tilt 35° Wall height (m) 4.0 Offset from wall (m) 1.50 1.75 2.00 Luminaire spacing (m) 1.50 1.75 2.00 211 156 118 Illuminance En (lx)
402 46666666 3
Weight 4.50kg LMF E krrIP65
∅ 194 466 3
34259.000 Graphit m LED 27W 2160lm 4000K neutral white Version 3 Spherolit lens, wallwash Maximum wind load area 0.063m2
216 4666 3
corrosion-resistant cast aluminium, double powder-coated. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 855
LED
www.erco.com
Powercast Lens wallwasher with LED
∅ 194 466 3
Weight 4.50kg LMF E krrIP65
216 4666 3
∅ 194 466 3
Weight 4.50kg LMF E krrIP65
LED Mean illuminance En (wall) Angle of tilt 35° Wall height (m) 6.0 Offset from wall (m) 1.75 2.00 2.25 Luminaire spacing (m) 1.75 2.00 2.25 193 156 128 Illuminance En (lx) LED Mean illuminance En (wall) Angle of tilt 35° Wall height (m) 6.0 Offset from wall (m) 1.75 2.00 2.25 Luminaire spacing (m) 1.75 2.00 2.25 155 126 103 Illuminance En (lx)
402 46666666 3
138 46 3
34294.000 Graphit m LED 40W 2610lm 3000K warm white Version 3 Spherolit lens, wallwash Maximum wind load area 0.063m2
216 4666 3
402 46666666 3
138 46 3
34295.000 Graphit m LED 40W 3240lm 4000K neutral white Version 3 Spherolit lens, wallwash Maximum wind load area 0.063m2
Mean illuminance En (wall) Angle of tilt 35° Wall height (m) 4.0 Offset from wall (m) 1.50 1.75 2.00 Luminaire spacing (m) 1.50 1.75 2.00 170 126 95 Illuminance En (lx)
402 46666666 3
Weight 4.50kg LMF E krrIP65
∅ 194 466 3
34258.000 Graphit m LED 27W 1740lm 3000K warm white Version 3 Spherolit lens, wallwash Maximum wind load area 0.063m2
138 46 3
216 4666 3
LED
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic control gear. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Screw-mounted cover with safety glass:
∅ 264 46666 3
Weight 8.00kg LMF E krrIP65
290 46666 3
LED Mean illuminance En (wall) Angle of tilt 35° Wall height (m) 8.0 Offset from wall (m) 2.00 2.25 2.50 2.75 Luminaire spacing (m) 2.00 2.25 2.50 2.75 130 111 96 84 Illuminance En (lx)
522 4666666666 3
4178 663 34300.000 Graphit m LED 54W 3480lm 3000K warm white Version 3 Spherolit lens, wallwash Maximum wind load area 0.119m2
Mean illuminance En (wall) Angle of tilt 35° Wall height (m) 8.0 Offset from wall (m) 2.00 2.25 2.50 2.75 Luminaire spacing (m) 2.00 2.25 2.50 2.75 169 145 125 108 Illuminance En (lx)
522 4666666666 3
Weight 8.00kg LMF E krrIP65
∅ 264 46666 3
34301.000 Graphit m LED 54W 4320lm 4000K neutral white Version 3 Spherolit lens, wallwash Maximum wind load area 0.119m2
4178 663
corrosion-resistant cast aluminium, double powder-coated. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories see below
290 46666 3
LED
www.erco.com
∅ 83
0
3664 6666
• • • • • •
• • • • • •
502 6466666666 3
75 .00
33 9
34258.000 34259.000 34294.000 34295.000 34300.000 34301.000
34 9
74 .00
0
Powercast Accessories
∅ 60
6663664
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
ERCO Program 2012
855
Powercast Wallwasher for low-voltage halogen lamps Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic transformer 230/240/12V. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. 360° rotation. Fitting the mounting bracket to the housing must be done on site. Use dimmers for electronic transformers (trailing edge).
138 46 3
QT12-ax
138 46 3
216 4666 3
double powder-coated. Hinge open for lamp replacement. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. 360° rotation. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 858
Mean illuminance En (wall) Angle of tilt 70° Wall height (m) 3.0 Offset from wall (m) 1.50 1.50 2.00 2.00 Luminaire spacing (m) 1.50 1.75 2.00 2.25 241 207 153 136 Illuminance En (lx)
402 46666666 3
∅ 194 466 3
Weight 4.70kg LMF E krrIP65
216 4666 3
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic transformer, 230-240/12V, with plug and play connectivity. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium,
DALI PLUG+ PLAY
34229.000 Graphit m DALI QT12-ax 100W 12V GY6.35 2200lm Spherolit reflector, washlight Maximum wind load area 0.063m2
Mean illuminance En (wall) Angle of tilt 70° Wall height (m) 3.0 Offset from wall (m) 1.50 1.50 2.00 2.00 Luminaire spacing (m) 1.50 1.75 2.00 2.25 241 207 153 136 Illuminance En (lx)
402 46666666 3
Weight 4.60kg LMF E I krrIP65
∅ 194 466 3
34223.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm Spherolit reflector, washlight Maximum wind load area 0.063m2
Protection mode IP65: dust-proof and water jet-proof. Accessories page 858
QT12-ax
Powercast Wallwasher for metal halide lamps Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Electronic control gear. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement.
138 46 3
856
ERCO Program 2012
Mean illuminance En (wall) Angle of tilt 55° Wall height (m) 3.0 Offset from wall (m) 1.50 1.50 2.00 2.00 Luminaire spacing (m) 1.50 1.75 2.00 2.25 184 158 118 105 Illuminance En (lx)
402 46666666 3
Weight 4.65kg LMF E I5 krrIP65
∅ 194 466 3
34215.000 Graphit m ECG HIT-TC-CE 20W GU6.5 1800lm Spherolit reflector, washlight Maximum wind load area 0.063m2
216 4666 3
Reflector replacement without tools: aluminium, silver, mirror-finish anodised. 360° rotation. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 858
HIT-TC-CE
www.erco.com
Powercast Wallwasher for metal halide lamps Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Control gear 230V, 50Hz, with temperature controller, timed-ignitor, capacitor. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium,
∅ 194 466 3
Weight 5.80kg LMF E I5 krrIP65
216 4666 3
HIT-CE Mean illuminance En (wall) Angle of tilt 55° Wall height (m) 6.0 Offset from wall (m) 2.50 3.00 3.50 Luminaire spacing (m) 2.50 3.00 3.50 203 158 127 Illuminance En (lx)
402 46666666 3
138 46 3
34217.000 Graphit m HIT-CE 70W G12 6600lm Spherolit reflector, washlight Maximum wind load area 0.063m2
Mean illuminance En (wall) Angle of tilt 55° Wall height (m) 4.0 Offset from wall (m) 2.00 2.00 2.50 Luminaire spacing (m) 2.00 2.50 2.50 186 149 134 Illuminance En (lx)
402 46666666 3
Weight 5.40kg LMF E I5 krrIP65
∅ 194 466 3
34216.000 Graphit m HIT-CE 35W G12 3300lm Spherolit reflector, washlight Maximum wind load area 0.063m2
138 46 3
216 4666 3
HIT-CE
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Mounting bracket: corrosion-resistant aluminium, double powder-coated. Housing: 90° tilt. Control gear 230V, 50Hz, with temperature controller, timed-ignitor, capacitor. Two cable entries with M25 cable glands. Through-wiring possible. 5-pole terminal block. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Concealed fixing ring for accessories. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. 360° rotation. Fitting the mounting bracket to the housing must be done on site.
Weight 10.00kg LMF E 5 krrIP65
∅ 264 46666 3
34241.000 Graphit m HIT-CE 250W G12 23000lm Spherolit reflector, washlight Maximum wind load area 0.119m2
4178 663
www.erco.com
290 46666 3
HIT-CE Mean illuminance En (wall) Angle of tilt 55° Wall height (m) 10.0 Offset from wall (m) 4.00 4.00 5.00 Luminaire spacing (m) 4.00 4.50 5.00 273 243 203 Illuminance En (lx)
522 4666666666 3
4178 663
290 46666 3
Protection mode IP65: dust-proof and water jet-proof. Accessories page 858
Mean illuminance En (wall) Angle of tilt 55° Wall height (m) 8.0 Offset from wall (m) 3.00 4.00 5.00 Luminaire spacing (m) 3.00 4.00 5.00 279 189 137 Illuminance En (lx)
522 4666666666 3
Weight 8.80kg LMF E 5 krrIP65
∅ 264 46666 3
34235.000 Graphit m HIT-CE 150W G12 14000lm Spherolit reflector, washlight Maximum wind load area 0.119m2
double powder-coated. Hinge open for lamp replacement. Reflector replacement without tools: aluminium, silver, mirror-finish anodised. 360° rotation. Fitting the mounting bracket to the housing must be done on site. Protection mode IP65: dust-proof and water jet-proof. Accessories page 858
HIT-CE
ERCO Program 2012
857
34283.000 34284.000 Softec lens
00 5 .0
00 33
97
34
97
4 .0
00 2 .0
00 34
27
0 .0
00 34
27
34
26
8 .0
00 6 .0
00 26 34
26
4 .0
00 2 .0
00 26
4 .0 28
34
• • • • •
34
34215.000 34216.000 34217.000 34223.000 34229.000 34235.000 34241.000
34
34
28
3 .0
00
Powercast Accessories
• •
• •
• •
• •
• •
• •
• • • • • • •
• • • • • • •
•
34262.000 Skintone filter
34264.000 Daylight conversion filter
34266.000 Colour filter Magenta
34268.000 Colour filter Amber
34270.000 Colour filter Sky blue
34272.000 Colour filter Night blue
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
∅ 83
502
64666666663
3664 6666
∅ 60
6663664
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
858
ERCO Program 2012
www.erco.com
Grasshopper Projectors, floodlights, wallwashers The Grasshopper range with its versatile mounting possibilities and the lockable hinge is suitable for flexible accent lighting and floodlighting in the outdoor area. The compact design with low power rating lamps is used, for example, for the lighting of faรงades, details, objects such as company signs or sculptures, plants and trees. The optical systems feature the innovative Spherolit technology enabling the options of narrow spot, spot, flood, wide flood, oval flood or wallwash light distribution. The control gear is separate from the light head and ensures optimal heat management to protect the electronic components.
Accentuation Emphasis of objects or architectural elements produced by a narrow beam.
Projectors Narrow to very wide beam, rotationally symmetrical light distribution for accent lighting.
LED 9W - 20W 580lm - 1620lm Narrow spot, spot, flood, wide flood Optional: DALI, varychrome Low- voltage halogen lamps 50W 1250lm Spot, flood, wide flood High- pressure discharge lamps 20W - 35W 1800lm - 3900lm Spot, flood, wide flood
Washlighting Wide- beam illumination of larger objects or spatial zones.
Floodlights Axially symmetrical light distribution with flood characteristics produced by an oval beam for floodlighting.
LED 13W - 20W 870lm - 1620lm Optional: DALI
Wallwashing Vertical illuminance for brightening and dividing the space.
Lens wallwashers Asymmetrical light distribution for highly uniform wallwashing.
LED 13W - 20W 870lm - 1620lm Optional: DALI
www.erco.com
ERCO Program 2012
859
Grasshopper Projectors, floodlights, wallwashers LED technology The maintenance- free Grasshoppers with LEDs are designed for outdoor use in places that are difficult to access. The Grasshopper projectors are ideal for highlighting façade details, sculptures, plants and trees and are available with white LEDs and in DALI- controlled varychrome technology. They have a robust multi- powder- coated IP65 cast aluminium housing and can be accurately adjusted due to their rigid hinges. The control gear housing is separate from the light head and provides optimal operating conditions for the electronic components.
Narrow spot Used to accentuate small objects with high light intensity or to project over greater distances between the luminaire and the target object. Beam angle: < 10°.
Spot This is the standard characteristic for accent lighting for objects of all kinds, especially to reveal the three- dimensional shape. Beam angle: 10°–20°.
Flood Used for efficient accentua tion of large objects or to uniformly emphasise a complete spatial zone. Beam angle: 25°–35°.
Wide flood Used for flexible, flooding illumination of surface areas and spatial zones, especially useful for the presentation of goods. Beam angle: > 45°.
LED heat management Like other lamps, high- power LEDs generate heat. To prevent the luminous flux and life of the lamp from decreasing drastically, the maximum junction temperature must not be exceeded even during continuous operation. ERCO places particular importance on heat management in its luminaires to ensure that the LED modules remain below the critical temperature range and operate at full output throughout their lives. Mounting the LED module directly on metalcore PCBs effectively dissipates
860
ERCO Program 2012
Oval flood The oval flood Spherolit lens has an axially symmetrical light intensity distribution, producing an oval beam of approx. 20° to 60°.
the heat to the luminaire housing. The form, design and material of the housing all contribute to effective heat management. Extensive simulations and tests in the development phase ensure the success of the production procedures used.
Wallwash The light distribution of the lens wallwasher is designed to produce very good uniformity.
The DALI- compatible luminaires have digital control gear which allows each luminaire to be individually addressed, for example by using the ERCO Light System DALI with integral ERCO Light Studio software.
www.erco.com
Grasshopper Projector with LED
Weight 2.30kg LMF E I3p krrIP65
Weight 2.30kg LMF E 3p krrIP65
124 46666 3 93 466 3 124 46666 3 93 466 3
34087.000 Graphit m DALI LED 9W 580lm 3000K warm white Version 4 Spherolit lens, narrow spot
124 46666 3
124 46666 3
235 466666666 3
LED
LED
124 46666 3
Weight 2.30kg LMF E I3p krrIP65
124 46666 3 93 466 3
34030.000 Graphit m LED 13W 870lm 3000K warm white Version 4 Spherolit lens, spot
www.erco.com
LED
LED
30°
60°
40000 cd
30°
2 4 6 8 10
30°
60°
40000 cd
30°
2 4 6 8 10
30°
60°
10000 cd
60°
LED
8737 2184 971 546 349 E(lx) 7038 1760 782 440 282
D(m) 6° 0.21 0.42 0.63 0.84 1.05 D(m) 6° 0.21 0.42 0.63 0.84 1.05
E(lx) 8737 2184 971 546 349 E(lx) 7038 1760 782 440 282
D(m) 6° 0.21 0.42 0.63 0.84 1.05 D(m) 6° 0.21 0.42 0.63 0.84 1.05
safety glass. Corrosion-resistant cast aluminium, double powder-coated. Improved lamp screening for highest visual comfort. Protection mode IP65: dust-proof and water jet-proof. Accessories page 868
30°
1 2 3 4 5 h(m)
124 46666 3
E(lx)
safety glass. Corrosion-resistant cast aluminium, double powder-coated. Improved lamp screening for highest visual comfort. Protection mode IP65: dust-proof and water jet-proof. Accessories page 868
60°
235 466666666 3
124 46666 3
206 46666666 3
160 466666 3
30°
2 4 6 8 10
h(m)
206 46666666 3
160 466666 3
40000 cd
60°
235 466666666 3
124 46666 3 93 466 3
Weight 2.30kg LMF E I3p krrIP65
30°
60°
60°
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with scale and internal wiring. Housing 80° tiltable, rotatable through 360°. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Compact light head with non-reflecting 34021.000 Graphit m LED 13W 1080lm 4000K neutral white Version 4 Spherolit lens, spot
30°
h(m)
206 46666666 3
160 466666 3
40000 cd
2 4 6 8 10
h(m)
206 46666666 3
160 466666 3
30°
60°
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with scale and internal wiring. Housing 80° tiltable, rotatable through 360°. DALI control gear, with plug and play connectivity. 2 cable entries. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Compact light head with non-reflecting
DALI PLUG+ PLAY
Weight 2.30kg LMF E 3p krrIP65
LED
60°
h(m)
206 46666666 3
160 466666 3
34086.000 Graphit m DALI LED 9W 720lm 4000K neutral white Version 4 Spherolit lens, narrow spot
124 46666 3
60°
235 466666666 3
34085.000 Graphit m LED 9W 580lm 3000K warm white Version 4 Spherolit lens, narrow spot
124 46666 3 93 466 3
160 466666 3
safety glass. Corrosion-resistant cast aluminium, double powder-coated. Improved lamp screening for highest visual comfort. Protection mode IP65: dust-proof and water jet-proof. Accessories page 868
h(m)
206 46666666 3
235 466666666 3
Weight 2.30kg LMF E I3p krrIP65
235 466666666 3
34084.000 Graphit m LED 9W 720lm 4000K neutral white Version 4 Spherolit lens, narrow spot
124 46666 3 93 466 3
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with scale and internal wiring. Housing 80° tiltable, rotatable through 360°. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Compact light head with non-reflecting
30°
60°
10000 cd
30°
1 2 3 4 5
E(lx) 8563 2141 951 535 343 E(lx) 6898 1725 766 431 276
ERCO Program 2012
D(m) 17° 0.30 0.60 0.90 1.20 1.49 D(m) 17° 0.30 0.60 0.90 1.20 1.49
861
Weight 2.30kg LMF E I3p krrIP65
124 46666 3 93 466 3
34089.000 Graphit m LED 20W 1305lm 3000K warm white Version 4 Spherolit lens, spot
124 46666 3 93 466 3
Weight 2.30kg LMF E I3p krrIP65
Weight 2.30kg LMF E I3p krrIP65
124 46666 3 93 466 3
34091.000 Graphit m LED 20W 1305lm 3000K warm white Version 4 Spherolit lens, flood
124 46666 3 93 466 3
Weight 2.30kg LMF E I3p krrIP65
124 46666 3 93 466 3
Weight 2.30kg LMF E I3p krrIP65
862
ERCO Program 2012
124 46666 3
235 466666666 3 235 466666666 3
30°
235 466666666 3
LED
30°
60°
2000 cd
30°
1 2 3 4 5
235 466666666 3
60°
LED
30°
60°
2000 cd
60°
LED
30°
30°
60°
15000 cd
30°
60°
LED
30°
60°
15000 cd
30°
124 46666 3
60°
LED
30°
60°
7500 cd
30°
124 46666 3
LED
30°
60°
7500 cd
30°
124 46666 3
LED
30°
60°
3000 cd
30°
124 46666 3
LED
30°
60°
3000 cd
30°
3177 794 353 199 127 E(lx) 1306 327 145 82 52 E(lx)
D(m) 27° 0.48 0.96 1.44 1.92 2.40 D(m) 46° 0.85 1.70 2.55 3.40 4.24 D(m) 46° 0.85 1.70 2.55 3.40 4.24
E(lx) D(m) 16° 12612 0.28 3153 0.56 1401 0.84 788 1.12 504 1.41
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5 h(m)
60°
E(lx)
h(m)
h(m) 60°
3943 986 438 246 158
D(m) 27° 0.48 0.96 1.44 1.92 2.40
1052 263 117 66 42
h(m) 60°
E(lx)
1 2 3 4 5
h(m)
206 46666666 3
160 466666 3
5500 cd
h(m)
206 46666666 3
160 466666 3
34093.000 Graphit m LED 20W 1305lm 3000K warm white Version 4 Spherolit lens, wide flood
124 46666 3
206 46666666 3
160 466666 3
34092.000 Graphit m LED 20W 1620lm 4000K neutral white Version 4 Spherolit lens, wide flood
124 46666 3
206 46666666 3
160 466666 3
30°
1 2 3 4 5
h(m)
206 46666666 3
160 466666 3
34090.000 Graphit m LED 20W 1620lm 4000K neutral white Version 4 Spherolit lens, flood
124 46666 3
206 46666666 3
160 466666 3
30°
60°
60°
235 466666666 3
Weight 2.30kg LMF E I3p krrIP65
124 46666 3 93 466 3
34088.000 Graphit m LED 20W 1620lm 4000K neutral white Version 4 Spherolit lens, spot
5500 cd
1 2 3 4 5
h(m)
206 46666666 3
160 466666 3
LED
235 466666666 3
Weight 2.30kg LMF E I3p krrIP65
124 46666 3 93 466 3
34037.000 Graphit m LED 13W 870lm 3000K warm white Version 4 Spherolit lens, wide flood
124 46666 3
206 46666666 3
160 466666 3
30°
60°
235 466666666 3
124 46666 3 93 466 3
Weight 2.30kg LMF E I3p krrIP65
LED
60°
h(m)
206 46666666 3
160 466666 3
34036.000 Graphit m LED 13W 1080lm 4000K neutral white Version 4 Spherolit lens, wide flood
124 46666 3
60°
235 466666666 3
Weight 2.30kg LMF E I3p krrIP65
124 46666 3 93 466 3
160 466666 3
34035.000 Graphit m LED 13W 870lm 3000K warm white Version 4 Spherolit lens, flood
h(m)
206 46666666 3
235 466666666 3
Weight 2.30kg LMF E I3p krrIP65
235 466666666 3
34034.000 Graphit m LED 13W 1080lm 4000K neutral white Version 4 Spherolit lens, flood
124 46666 3 93 466 3
Grasshopper Projector with LED
1 2 3 4 5
E(lx) D(m) 16° 10160 0.28 2540 0.56 1129 0.84 635 1.12 406 1.41 E(lx) 5796 1449 644 362 232 E(lx) 4669 1167 519 292 187 E(lx) 1881 470 209 118 75 E(lx) 1515 379 168 95 61
D(m) 27° 0.48 0.96 1.44 1.92 2.40 D(m) 27° 0.48 0.96 1.44 1.92 2.40 D(m) 46° 0.85 1.70 2.55 3.40 4.24 D(m) 46° 0.85 1.70 2.55 3.40 4.24
www.erco.com
Grasshopper Projector with LED Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with scale and internal wiring. Housing 80° tiltable, rotatable through 360°. DALI control gear, with plug and play connectivity. 2 cable entries. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Compact light head with non-reflecting
Weight 2.30kg LMF E 3p krrIP65
124 46666 3 93 466 3
34040.000 Graphit m DALI LED 13W 870lm 3000K warm white Version 4 Spherolit lens, flood
124 46666 3 93 466 3
Weight 2.30kg LMF E 3p krrIP65
Weight 2.30kg LMF E 3p krrIP65
124 46666 3 93 466 3
34042.000 Graphit m DALI LED 13W 870lm 3000K warm white Version 4 Spherolit lens, wide flood
124 46666 3
124 46666 3
235 466666666 3 235 466666666 3
LED
30°
60°
10000 cd
30°
1 2 3 4 5
60°
LED
30°
60°
5500 cd
30°
1 2 3 4 5
60°
LED
30°
60°
5500 cd
30°
1 2 3 4 5 h(m)
124 46666 3
60°
LED
30°
60°
2000 cd
30°
1 2 3 4 5 h(m)
206 46666666 3
160 466666 3
30°
h(m)
206 46666666 3
160 466666 3
10000 cd
1 2 3 4 5
h(m)
206 46666666 3
160 466666 3
34043.000 Graphit m DALI LED 13W 1080lm 4000K neutral white Version 4 Spherolit lens, wide flood
124 46666 3
206 46666666 3
160 466666 3
30°
60°
235 466666666 3
124 46666 3 93 466 3
Weight 2.30kg LMF E 3p krrIP65
LED
60°
h(m)
206 46666666 3
160 466666 3
34041.000 Graphit m DALI LED 13W 1080lm 4000K neutral white Version 4 Spherolit lens, flood
124 46666 3
60°
235 466666666 3
Weight 2.30kg LMF E 3p krrIP65
124 46666 3 93 466 3
160 466666 3
34038.000 Graphit m DALI LED 13W 870lm 3000K warm white Version 4 Spherolit lens, spot
h(m)
206 46666666 3
235 466666666 3
Weight 2.30kg LMF E 3p krrIP65
124 46666 3
60°
235 466666666 3
34039.000 Graphit m DALI LED 13W 1080lm 4000K neutral white Version 4 Spherolit lens, spot
124 46666 3 93 466 3
DALI PLUG+ PLAY
safety glass. Corrosion-resistant cast aluminium, double powder-coated. Improved lamp screening for highest visual comfort. Protection mode IP65: dust-proof and water jet-proof. Accessories page 868
LED
30°
60°
2000 cd
30°
1 2 3 4 5
E(lx) 8563 2141 951 535 343 E(lx) 6898 1725 766 431 276 E(lx) 3943 986 438 246 158 E(lx) 3177 794 353 199 127 E(lx) 1306 327 145 82 52 E(lx) 1052 263 117 66 42
D(m) 17° 0.30 0.60 0.90 1.20 1.49 D(m) 17° 0.30 0.60 0.90 1.20 1.49 D(m) 27° 0.48 0.96 1.44 1.92 2.40 D(m) 27° 0.48 0.96 1.44 1.92 2.40 D(m) 46° 0.85 1.70 2.55 3.40 4.24 D(m) 46° 0.85 1.70 2.55 3.40 4.24
RDS Radio Dimensione Suono headquarter, Rome. Architect: Nigel Rayan. Lighting design: Baldieri, Rome.
www.erco.com
ERCO Program 2012
863
Grasshopper Projector RGB varychrome with LED Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with scale and internal wiring. Housing 80° tiltable, rotatable through 360°. 2 cable entries. Through-wiring possible. 5-pole terminal block. DALI control gear, with plug and play connectivity for ERCO RGB varychrome colour mixing. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer.
Weight 2.30kg LMF E 3p krrIP65
h(m)
206 46666666 3
160 466666 3
124 46666 3
60°
235 466666666 3
34029.000 Graphit m DALI LED 12W 375lm red, green, blue Version 2 Spherolit lens, spot Colour compensation for precise light colour.
124 46666 3 93 466 3
DALI PLUG+ PLAY
Compact light head with non-reflecting safety glass. Corrosion-resistant cast aluminium, double powder-coated. Improved lamp screening for highest visual comfort. Protection mode IP65: dust-proof and water jet-proof. Accessories page 868
LED
Primary colours LED module Colour F(lm) l(nm) Red 135 620-625 Green 180 525-530 Blue 60 465-470
30°
60°
3500 cd
30°
1 2 3 4 5
E(lx) 2768 692 308 173 111
D(m) 15° 0.26 0.53 0.79 1.05 1.32
S(%) 97 77 97
Grasshopper Projector for low-voltage halogen lamps Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with scale and internal wiring. Housing 80° tiltable, rotatable through 360°. Electronic transformer 230/240/12V. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver, mirrorfinish anodised. Compact light head with safety glass. Corrosion-resistant cast aluminium,
160 466666 3
Weight 2.30kg LMF E 5p krrIP65
246 4666666666 3
160 466666 3
864
ERCO Program 2012
124 4666 3
124 46666 3 ∅ 95 466 3
34033.000 Graphit m QT12-ax-RE 50W 12V GY6.35 1250lm Spherolit reflector, wide flood
235 6466666666 3
QT12-ax-RE
30°
60°
10000 cd
30°
1 2 3 4 5 h(m)
246 4666666666 3
124 46666 3 ∅ 95 466 3
Weight 2.30kg LMF E 5p krrIP65
124 4666 3
60°
124 4666 3
60°
235 6466666666 3
160 466666 3
34032.000 Graphit m QT12-ax-RE 50W 12V GY6.35 1250lm Spherolit reflector, flood
h(m)
246 4666666666 3
QT12-ax-RE
30°
60°
2500 cd
60°
235 6466666666 3
Weight 2.30kg LMF E 5p krrIP65
124 46666 3 ∅ 95 466 3
34031.000 Graphit m QT12-ax-RE 50W 12V GY6.35 1250lm Spherolit reflector, spot
double powder-coated. Improved lamp screening for highest visual comfort. Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water jet-proof. Accessories page 868
QT12-ax-RE
30°
30°
60°
1500 cd
30°
E(lx) 8268 2067 919 517 331 E(lx)
1 2 3 4 5
1897 474 211 119 76
h(m)
E(lx)
1 2 3 4 5
976 244 108 61 39
D(m) 15° 0.26 0.53 0.79 1.05 1.32 D(m) 33° 0.59 1.18 1.78 2.37 2.96 D(m) 46° 0.85 1.70 2.55 3.40 4.24
www.erco.com
Grasshopper Projector for metal halide lamps Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with scale and internal wiring. Housing 80° tiltable, rotatable through 360°. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver, mirrorfinish anodised. Compact light head with safety glass. Corrosion-resistant cast aluminium,
Weight 2.30kg LMF E 5p krrIP65
246 4666666666 3
160 466666 3
Weight 2.30kg LMF E 5p krrIP65
124 4666 3
160 466666 3
235 6466666666 3 235 6466666666 3
30°
60°
4000 cd
30°
1 2 3 4 5
60°
HIT-TC-CE
30°
60°
2000 cd
60°
HIT-TC-CE
30°
30°
60°
20000 cd
30°
60°
HIT-TC-CE
30°
60°
7500 cd
30°
124 4666 3
60°
HIT-TC-CE
30°
60°
4000 cd
30°
E(lx) D(m) 15° 10049 0.26 2512 0.53 1117 0.79 628 1.05 402 1.32 E(lx) 2779 695 309 174 111 E(lx)
D(m) 31° 0.55 1.11 1.66 2.22 2.77 D(m) 45° 0.83 1.66 2.49 3.31 4.14
1 2 3 4 5
1456 364 162 91 58
h(m)
E(lx) D(m) 16° 18664 0.28 4666 0.56 2074 0.84 1167 1.12 747 1.41
1 2 3 4 5
1 2 3 4 5 h(m)
246 4666666666 3
124 46666 3 ∅ 95 466 3
Weight 2.30kg LMF E 5p krrIP65
30°
h(m)
246 4666666666 3
160 466666 3
34027.000 Graphit m ECG HIT-TC-CE 35W G8.5 3900lm Spherolit reflector, wide flood
124 4666 3
124 46666 3 ∅ 95 466 3
34026.000 Graphit m ECG HIT-TC-CE 35W G8.5 3900lm Spherolit reflector, flood
124 4666 3
124 46666 3 ∅ 95 466 3
34025.000 Graphit m ECG HIT-TC-CE 35W G8.5 3900lm Spherolit reflector, spot
12500 cd
1 2 3 4 5
h(m)
246 4666666666 3
160 466666 3
HIT-TC-CE
235 6466666666 3
Weight 2.30kg LMF E 5p krrIP65
124 4666 3
124 46666 3 ∅ 95 466 3
34024.000 Graphit m ECG HIT-TC-CE 20W G8.5 1800lm Spherolit reflector, wide flood
30°
60°
235 6466666666 3
160 466666 3
HIT-TC-CE
60°
h(m)
246 4666666666 3
124 46666 3 ∅ 95 466 3
Weight 2.30kg LMF E 5p krrIP65
124 4666 3
60°
235 6466666666 3
160 466666 3
34023.000 Graphit m ECG HIT-TC-CE 20W G8.5 1800lm Spherolit reflector, flood
h(m)
246 4666666666 3
235 6466666666 3
Weight 2.30kg LMF E 5p krrIP65
124 46666 3 ∅ 95 466 3
34022.000 Graphit m ECG HIT-TC-CE 20W G8.5 1800lm Spherolit reflector, spot
double powder-coated. Improved lamp screening for highest visual comfort. Protection mode IP65: dust-proof and water jet-proof. Accessories page 868
1 2 3 4 5
E(lx) 6368 1592 708 398 255 E(lx) 3207 802 356 200 128
D(m) 31° 0.55 1.11 1.66 2.22 2.77 D(m) 46° 0.85 1.70 2.55 3.40 4.24
Grasshopper Projector with cantilever for metal halide lamps Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with scale and internal wiring. Housing 80° tiltable, rotatable through 360°. Cantilever: corrosion-resistant aluminium tube. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver, mirrorfinish anodised. Sculpture lens for Weight 3.55kg LMF E 5p krrIP65
834 46666666666666666666666666 3
∅ 95 466 3 124 46666 3
www.erco.com
60°
160 466666 3
34028.000 Graphit m ECG HIT-TC-CE 35W G8.5 3900lm Spherolit reflector, spot Sculpture lens
uniform illumination of areas in close proximity. Compact light head with improved lamp screening for highest visual comfort. Corrosion-resistant cast aluminium, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. Accessories page 868
HIT-TC-CE
30°
60°
6000 cd
30°
h(m) E(lx) D(m) 19° 1 5892 0.33 2 1473 0.67 3 655 1.00 4 368 1.34 5 236 1.67
ERCO Program 2012
47° 0.87 1.74 2.61 3.48 4.35
865
Grasshopper Floodlight with LED
206 46666666 3
34094.000 Graphit m LED 20W 1620lm 4000K neutral white Version 4 Spherolit lens, oval flood
Weight 2.30kg LMF E I3p krrIP65
124 46666 3 93 466 3
160 466666 3 206 46666666 3
Weight 2.30kg LMF E I3p krrIP65
124 46666 3 93 466 3
160 466666 3
34095.000 Graphit m LED 20W 1305lm 3000K warm white Version 4 Spherolit lens, oval flood
124 46666 3 93 466 3
206 46666666 3
Weight 2.30kg LMF E 3p krrIP65
124 46666 3 93 466 3
160 466666 3
34015.000 Graphit m DALI LED 13W 870lm 3000K warm white Version 4 Spherolit lens, oval flood
ERCO Program 2012
124 46666 3
206 46666666 3
160 466666 3
866
124 46666 3
124 46666 3
235 466666666 3
30°
60°
3000 cd
60°
LED
30°
LED
30°
3000 cd
30°
4000 cd
4000 cd
30°
h(m) E(lx) D(m) 55° 1 1909 1.04 2 477 2.08 3 212 3.12 4 119 4.16 5 76 5.21
19° 0.33 0.67 1.00 1.34 1.67
h(m) E(lx) D(m) 55° 1 1538 1.04 2 384 2.08 3 171 3.12 4 96 4.16 5 62 5.21
19° 0.33 0.67 1.00 1.34 1.67
h(m) E(lx) D(m) 54° 1 2748 1.02 2 687 2.04 3 305 3.06 4 172 4.08 5 110 5.10
19° 0.33 0.67 1.00 1.34 1.67
h(m) E(lx) D(m) 54° 1 2214 1.02 2 553 2.04 3 246 3.06 4 138 4.08 5 89 5.10
19° 0.33 0.67 1.00 1.34 1.67
Compact light head with non-reflecting safety glass. Corrosion-resistant cast aluminium, double powder-coated. Improved lamp screening for highest visual comfort. Protection mode IP65: dust-proof and water jet-proof. Accessories page 868
30°
60°
3000 cd
60°
LED
30°
60°
60°
LED
30°
60°
60°
LED
30°
60°
60°
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with scale and internal wiring. Housing 80° tiltable, rotatable through 360°. DALI control gear, with plug and play connectivity. 2 cable entries. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Lens mountable turned through 90°.
DALI PLUG+ PLAY
Weight 2.30kg LMF E 3p krrIP65
124 46666 3
206 46666666 3
160 466666 3
34014.000 Graphit m DALI LED 13W 1080lm 4000K neutral white Version 4 Spherolit lens, oval flood
124 46666 3
LED
235 466666666 3
Weight 2.30kg LMF E I3p krrIP65
124 46666 3
235 466666666 3
34045.000 Graphit m LED 13W 870lm 3000K warm white Version 4 Spherolit lens, oval flood
124 46666 3 93 466 3
160 466666 3
Compact light head with non-reflecting safety glass. Corrosion-resistant cast aluminium, double powder-coated. Improved lamp screening for highest visual comfort. Protection mode IP65: dust-proof and water jet-proof. Accessories page 868
60°
235 466666666 3
206 46666666 3
235 466666666 3
Weight 2.30kg LMF E I3p krrIP65
235 466666666 3
34044.000 Graphit m LED 13W 1080lm 4000K neutral white Version 4 Spherolit lens, oval flood
124 46666 3 93 466 3
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with scale and internal wiring. Housing 80° tiltable, rotatable through 360°. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Lens mountable turned through 90°.
30°
30°
60°
3000 cd
30°
h(m) E(lx) D(m) 55° 1 1909 1.04 2 477 2.08 3 212 3.12 4 119 4.16 5 76 5.21
19° 0.33 0.67 1.00 1.34 1.67
h(m) E(lx) D(m) 55° 1 1538 1.04 2 384 2.08 3 171 3.12 4 96 4.16 5 62 5.21
19° 0.33 0.67 1.00 1.34 1.67
www.erco.com
Grasshopper Lens wallwasher with LED
206 46666666 3
34096.000 Graphit m LED 20W 1620lm 4000K neutral white Version 4 Spherolit lens, wallwash
Weight 2.30kg LMF E I3p krrIP65
124 46666 3 93 466 3
160 466666 3 206 46666666 3
Weight 2.30kg LMF E I3p krrIP65
124 46666 3 93 466 3
160 466666 3
34097.000 Graphit m LED 20W 1305lm 3000K warm white Version 4 Spherolit lens, wallwash
124 46666 3 93 466 3
206 46666666 3
Weight 2.30kg LMF E 3p krrIP65
124 46666 3 93 466 3
160 466666 3
34017.000 Graphit m DALI LED 13W 870lm 3000K warm white Version 4 Spherolit lens, wallwash
124 46666 3
206 46666666 3
160 466666 3
www.erco.com
124 46666 3
235 466666666 3
Mean illuminance En (wall) Angle of tilt 35° Wall height (m) 3.0 Offset from wall (m) 1.00 1.25 1.50 Luminaire spacing (m) 1.00 1.25 1.50 165 113 79 Illuminance En (lx) LED Mean illuminance En (wall) Angle of tilt 35° Wall height (m) 4.0 Offset from wall (m) 1.25 1.50 1.50 Luminaire spacing (m) 1.25 1.25 1.50 181 163 136 Illuminance En (lx) LED Mean illuminance En (wall) Angle of tilt 35° Wall height (m) 4.0 Offset from wall (m) 1.25 1.50 1.50 Luminaire spacing (m) 1.25 1.25 1.50 146 132 110 Illuminance En (lx) LED
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with scale and internal wiring. Housing 80° tiltable, rotatable through 360°. DALI control gear, with plug and play connectivity. 2 cable entries. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Compact light head with non-reflecting
DALI PLUG+ PLAY
Weight 2.30kg LMF E 3p krrIP65
124 46666 3
206 46666666 3
160 466666 3
34016.000 Graphit m DALI LED 13W 1080lm 4000K neutral white Version 4 Spherolit lens, wallwash
124 46666 3
LED
235 466666666 3
Weight 2.30kg LMF E I3p krrIP65
124 46666 3
235 466666666 3
34047.000 Graphit m LED 13W 870lm 3000K warm white Version 4 Spherolit lens, wallwash
124 46666 3 93 466 3
160 466666 3
124 46666 3
safety glass. Corrosion-resistant cast aluminium, double powder-coated. Improved lamp screening for highest visual comfort. Protection mode IP65: dust-proof and water jet-proof. Accessories page 868
Mean illuminance En (wall) Angle of tilt 35° Wall height (m) 3.0 Offset from wall (m) 1.00 1.25 1.50 Luminaire spacing (m) 1.00 1.25 1.50 205 140 98 Illuminance En (lx)
235 466666666 3
206 46666666 3
safety glass. Corrosion-resistant cast aluminium, double powder-coated. Improved lamp screening for highest visual comfort. Protection mode IP65: dust-proof and water jet-proof. Accessories page 868
Mean illuminance En (wall) Angle of tilt 35° Wall height (m) 3.0 Offset from wall (m) 1.00 1.25 1.50 Luminaire spacing (m) 1.00 1.25 1.50 205 140 98 Illuminance En (lx)
235 466666666 3
Weight 2.30kg LMF E I3p krrIP65
LED Mean illuminance En (wall) Angle of tilt 35° Wall height (m) 3.0 Offset from wall (m) 1.00 1.25 1.50 Luminaire spacing (m) 1.00 1.25 1.50 165 113 79 Illuminance En (lx)
235 466666666 3
34046.000 Graphit m LED 13W 1080lm 4000K neutral white Version 4 Spherolit lens, wallwash
124 46666 3 93 466 3
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with scale and internal wiring. Housing 80° tiltable, rotatable through 360°. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Compact light head with non-reflecting
LED
ERCO Program 2012
867
99
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
34949.000 Sculpture lens
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
300 466666666666 3
00
4663
0 .0
00 3 .0
00 97
4 .0 97
∅ 84
33973.000 Ground spike Metal, hot-dip galvanised. Cable entry. Weight 0.48kg
120 466666 3
•
34
•
33
34014.000 34015.000 34016.000 34017.000 34021.000 34022.000 34023.000 34024.000 34025.000 34026.000 34027.000 34028.000 34029.000 34030.000 34031.000 34032.000 34033.000 34034.000 34035.000 34036.000 34037.000 34038.000 34039.000 34040.000 34041.000 34042.000 34043.000 34044.000 34045.000 34046.000 34047.000 34084.000 34085.000 34086.000 34087.000 34088.000 34089.000 34090.000 34091.000 34092.000 34093.000 34094.000 34095.000 34096.000 34097.000
34
34
94
9 .0
00
Grasshopper Accessories
3666 420 34990.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.16kg
Leonardo Glass Cube, Bad Driburg. Architect: 3deluxe, Wiesbaden. Lighting design: Atelier Schiefer, Leverkusen.
868
ERCO Program 2012
www.erco.com
Beamer Projectors, floodlights Beamer projectors and floodlights, with their rotationally or axially symmetrical light intensity distribution, are suitable for a wide range of lighting tasks, e.g. accent lighting on vegetation or floodlighting of faรงades. Even over great distances, the lighting technology of the Beamer projectors produces an even, soft edged beam of light. The front section is designed as a snoot and ensures optimum anti- glare protection. The oval light distribution of the Beamer floodlights allows the luminaire to be placed closer to objects. They are therefore particularly suitable for efficient lighting of faรงade surfaces as well as trees.
Accentuation Emphasis of objects or architectural elements produced by a narrow beam.
Projectors Narrow to very wide beam, rotationally symmetrical light distribution for accent lighting.
LED 4.5W - 54W 290lm - 4320lm Narrow spot, spot, flood, wide flood Low- voltage halogen lamps 50W - 100W 1250lm - 2200lm Spot PAR lamps 120W - 300W 1300lm - 3000lm High- pressure discharge lamps 20W - 400W 1800lm - 35000lm Spot
Washlighting Wide- beam illumination of larger objects or spatial zones.
www.erco.com
Floodlights Axially symmetrical light distribution with flood characteristics produced by an oval beam for floodlighting.
LED 13W - 54W 870lm - 4320lm
ERCO Program 2012
869
Beamer Projectors, floodlights LED technology The quality of the optical systems has a major influence on the overall efficiency of an LED. With the goal of producing directed light, ERCO uses optical projection systems that have been designed and built in- house. A collimator as a secondary lens forms the interface between the LED lens on the printed circuit board and the interchangeable Spherolit lens, which then acts as a tertiary lens. This system design gives the ERCO user a unique variety of light distributions for professional lighting design applications. Decades of experience in injectionmoulded polymers ensure the highest quality levels from our in- house production plant.
The primary lens (1) is mounted directly on the LED chip and produces a hemispherical beam emission. As a secondary lens, the collimator (2) aligns the rays of light into a parallel beam, enabling different tertiary lenses to be added. After focusing the beam, it is the Spherolit tertiary lens (3) that then determines the light distribution.
2 1
3
Beam characteristics with Spherolit lenses for LEDs
Narrow spot To accentuate smaller objects with high illuminance or to cover considerable distances between luminaire and object. Beam angle: < 10°.
Spot This is the standard character istic for accent lighting for objects of all kinds, especially to reveal the three- dimensional shape. Beam angle: 10°–20°.
Flood Used for efficient accentua tion of large objects or to uniformly emphasise a complete spatial zone. Beam angle: 25°–35°.
Wide flood Used for flexible, flooding illumination of surface areas and spatial zones, especially useful for the presentation of goods. Beam angle: > 45°.
Oval flood The oval flood Spherolit lens has an axially symmetrical light intensity distribution, producing an oval beam of approx. 20° to 60°.
An extensive range of mounting accessories is shared by Beamer, Focalflood and Parscoop. These accessories enable the optimum mounting position in all situations, whether on the building itself or in the grounds.
870
ERCO Program 2012
To ensure high efficiency and an excellent lighting quality, ERCO uses optical projection systems that have been designed and built in- house. A collimator as a secondary lens forms the interface between the LED lens and the Spherolit lens, which then acts as a tertiary lens.
The Spherolit lenses are easily replaced without tools meaning that the light distribution patterns can be changed to suit various lighting tasks.
The pivot bracket with scale allows accurate alignment.
www.erco.com
Beamer Projector with mounting plate and LED Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer.
Weight 3.60kg LMF E krrIP65
60°
36664∅ 120 66666666
LED
60°
34426.000 Graphit m LED 13W 870lm 3000K warm white Version 1 Spherolit lens, wide flood Maximum wind load area 0.03m2
www.erco.com
36664∅ 120 66666666
LED
Weight 3.60kg LMF E krrIP65
30°
15000 cd
30°
2 4 6 8 10
60°
60°
238 4666 3
∅ 135 36664 66666666 ∅ 96 3664 66666666
4193 663 36664∅ 120 66666666
LED
30°
8000 cd
30°
60°
238 4666 3
60°
36664∅ 120 66666666
LED
4193 663
30°
8000 cd
60°
238 4666 3
60°
30°
36664∅ 120 66666666
LED
4193 663
30°
4000 cd
60°
30°
60°
238 4666 3
∅ 135 36664 66666666 ∅ 96 3664 66666666 ∅ 135 36664 66666666 ∅ 96 3664 66666666
4193 663
36664∅ 120 66666666
LED
4193 663
30°
4000 cd
60°
36664∅ 120 66666666
LED
4193 663
30°
60°
30°
2000 cd
60°
36664∅ 120 66666666
LED
E(lx) 3761 940 418 235 150 E(lx) 3030 758 337 189 121
D(m) 6° 0.21 0.42 0.63 0.84 1.05 D(m) 6° 0.21 0.42 0.63 0.84 1.05
Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Available from 2nd quarter 2012 Accessories page 883
238 4666 3
Weight 3.60kg LMF E krrIP65
60°
30°
60°
238 4666 3
34427.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1 Spherolit lens, wide flood Maximum wind load area 0.03m2
Weight 3.60kg LMF E krrIP65
∅ 135 36664 66666666 ∅ 96 3664 66666666
34424.000 Graphit m LED 13W 870lm 3000K warm white Version 1 Spherolit lens, flood Maximum wind load area 0.03m2
Weight 3.60kg LMF E krrIP65
30°
2 4 6 8 10 h(m)
∅ 135 36664 66666666 ∅ 96 3664 66666666
34425.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1 Spherolit lens, flood Maximum wind load area 0.03m2
Weight 3.60kg LMF E krrIP65
15000 cd
h(m)
∅ 135 36664 66666666 ∅ 96 3664 66666666
34422.000 Graphit m LED 13W 870lm 3000K warm white Version 1 Spherolit lens, spot Maximum wind load area 0.03m2
Weight 3.60kg LMF E krrIP65
30°
2 4 6 8 10 h(m)
4193 663
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. 34423.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1 Spherolit lens, spot Maximum wind load area 0.03m2
60°
238 4666 3
∅ 135 36664 66666666 ∅ 96 3664 66666666
h(m)
4193 663
238 4666 3
34420.000 Graphit m LED 4.5W 290lm 3000K warm white Version 1 Spherolit lens, narrow spot Maximum wind load area 0.03m2
Weight 3.60kg LMF E krrIP65
∅ 135 36664 66666666 ∅ 96 3664 66666666
34421.000 Graphit m LED 4.5W 360lm 4000K neutral white Version 1 Spherolit lens, narrow spot Maximum wind load area 0.03m2
Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Available from 2nd quarter 2012 Accessories page 883
30°
2000 cd
30°
E(lx) 1712 428 190 107 68 E(lx)
2 4 6 8 10
1379 345 153 86 55
h(m)
E(lx)
2 4 6 8 10
666 166 74 42 27
h(m)
E(lx)
2 4 6 8 10
536 134 60 34 21
h(m)
E(lx)
2 4 6 8 10
325 81 36 20 13
h(m)
E(lx)
2 4 6 8 10
262 65 29 16 10
ERCO Program 2012
D(m) 16° 0.56 1.12 1.69 2.25 2.81 D(m) 16° 0.56 1.12 1.69 2.25 2.81 D(m) 29° 1.03 2.07 3.10 4.14 5.17 D(m) 29° 1.03 2.07 3.10 4.14 5.17 D(m) 44° 1.62 3.23 4.85 6.46 8.08 D(m) 44° 1.62 3.23 4.85 6.46 8.08
871
Beamer Projector with mounting plate and LED
Weight 6.90kg LMF E krrIP65
60°
LED
∅ 153 36664 666666
LED
ERCO Program 2012
2 4 6 8 10
30°
22500 cd
30°
2 4 6 8 10
30°
60°
12500 cd
30°
2 4 6 8 10 h(m)
LED
283 46666 3
30°
60°
12500 cd
60°
LED
283 46666 3
∅ 153 36664 666666
872
30°
60°
60°
30°
LED
30°
30°
60°
5500 cd
60°
336 466666 3
∅ 205 36666 4 ∅ 160 366664
Weight 6.90kg LMF E krrIP65
LED
283 46666 3
∅ 153 36664 666666
34406.000 Graphit m LED 40W 2610lm 3000K warm white Version 1 Spherolit lens, wide flood Maximum wind load area 0.06m2
22500 cd
60°
336 466666 3
∅ 205 36666 4 ∅ 160 366664
Weight 6.90kg LMF D krrIP65
30°
60°
h(m)
∅ 153 36664 666666
34407.000 Graphit m LED 40W 3240lm 4000K neutral white Version 1 Spherolit lens, wide flood Maximum wind load area 0.06m2
LED
336 466666 3
∅ 205 36666 4 ∅ 160 366664
Weight 6.90kg LMF E krrIP65
30°
E(lx) D(m) 7° 14139 0.24 3535 0.49 1571 0.73 884 0.98 566 1.22 E(lx) D(m) 7° 0.24 0.49 0.73 0.98 1.22
11390 2847 1266 712 456
Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Available from 2nd quarter 2012 Accessories page 883
60°
283 46666 3
∅ 153 36664 666666
34404.000 Graphit m LED 40W 2610lm 3000K warm white Version 1 Spherolit lens, flood Maximum wind load area 0.06m2
60000 cd
2 4 6 8 10
h(m)
336 466666 3
∅ 205 36666 4 ∅ 160 366664
Weight 6.90kg LMF E krrIP65
LED
283 46666 3
∅ 153 36664 666666
34405.000 Graphit m LED 40W 3240lm 4000K neutral white Version 1 Spherolit lens, flood Maximum wind load area 0.06m2
30°
60°
60°
336 466666 3
Weight 6.90kg LMF E krrIP65
∅ 205 36666 4 ∅ 160 366664
∅ 153 36664 666666
34402.000 Graphit m LED 40W 2610lm 3000K warm white Version 1 Spherolit lens, spot Maximum wind load area 0.06m2
30°
2 4 6 8 10
h(m)
283 46666 3 336 466666 3
∅ 205 36666 4 ∅ 160 366664
Weight 6.90kg LMF E krrIP65
60000 cd
60°
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. 34403.000 Graphit m LED 40W 3240lm 4000K neutral white Version 1 Spherolit lens, spot Maximum wind load area 0.06m2
30°
60°
h(m)
283 46666 3 336 466666 3
Weight 6.90kg LMF E krrIP65
∅ 205 36666 4 ∅ 160 366664
∅ 153 36664 666666
34400.000 Graphit m LED 20W 1305lm 3000K warm white Version 1 Spherolit lens, narrow spot Maximum wind load area 0.06m2
Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Available from 2nd quarter 2012 Accessories page 883
h(m)
283 46666 3 336 466666 3
34401.000 Graphit m LED 20W 1620lm 4000K neutral white Version 1 Spherolit lens, narrow spot Maximum wind load area 0.06m2
∅ 205 36666 4 ∅ 160 366664
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer.
30°
60°
5500 cd
30°
E(lx) 4812 1203 535 301 192 E(lx) 3876 969 431 242 155 E(lx) 2181 545 242 136 87 E(lx)
2 4 6 8 10
1759 440 195 110 70
h(m)
E(lx)
2 4 6 8 10
884 221 98 55 35
h(m)
E(lx)
2 4 6 8 10
712 178 79 44 28
D(m) 17° 0.60 1.20 1.79 2.39 2.99 D(m) 17° 0.60 1.20 1.79 2.39 2.99 D(m) 27° 0.96 1.92 2.88 3.84 4.80 D(m) 27° 0.96 1.92 2.88 3.84 4.80 D(m) 42° 1.54 3.07 4.61 6.14 7.68 D(m) 42° 1.54 3.07 4.61 6.14 7.68
www.erco.com
Beamer Projector with mounting plate and LED Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer.
h(m)
334 466666 3
153 3∅666 4
LED
153 3∅666 4
LED
35000 cd
30°
30°
387 4666666 3 387 4666666 3
60°
16500 cd
387 4666666 3
60°
LED
30°
30°
60°
16500 cd
387 4666666 3
60°
LED
30°
30°
60°
7500 cd
60°
387 4666666 3 153 3∅666 4
www.erco.com
LED
334 466666 3 ∅ 274 46666 3 ∅ 220 3666664
Weight 9.10kg LMF E krrIP65
30°
2 4 6 8 10
2 4 6 8 10
2 4 6 8 10 h(m)
153 3∅666 4
34416.000 Graphit m LED 54W 3480lm 3000K warm white Version 1 Spherolit lens, wide flood Maximum wind load area 0.09m2
30°
60°
60°
334 466666 3 ∅ 274 46666 3 ∅ 220 3666664
Weight 9.10kg LMF E krrIP65
35000 cd
2 4 6 8 10
h(m)
153 3∅666 4
34417.000 Graphit m LED 54W 4320lm 4000K neutral white Version 1 Spherolit lens, wide flood Maximum wind load area 0.09m2
LED
334 466666 3 ∅ 274 46666 3 ∅ 220 3666664
Weight 9.10kg LMF E krrIP65
30°
60°
h(m)
153 3∅666 4
34414.000 Graphit m LED 54W 3480lm 3000K warm white Version 1 Spherolit lens, flood Maximum wind load area 0.09m2
30°
LED
E(lx) D(m) 7° 21503 0.24 5376 0.49 2389 0.73 1344 0.98 860 1.22 E(lx) D(m) 7° 0.24 0.49 0.73 0.98 1.22
17322 4330 1925 1083 693
Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Available from 2nd quarter 2012 Accessories page 883
60°
334 466666 3 ∅ 274 46666 3 ∅ 220 3666664
Weight 9.10kg LMF E krrIP65
100000 cd
2 4 6 8 10
h(m)
153 3∅666 4
34415.000 Graphit m LED 54W 4320lm 4000K neutral white Version 1 Spherolit lens, flood Maximum wind load area 0.09m2
LED
334 466666 3 ∅ 274 46666 3 ∅ 220 3666664
Weight 9.10kg LMF E krrIP65
30°
60°
60°
387 4666666 3 153 3∅666 4
34412.000 Graphit m LED 54W 3480lm 3000K warm white Version 1 Spherolit lens, spot Maximum wind load area 0.09m2
30°
2 4 6 8 10
h(m)
334 466666 3 ∅ 274 46666 3 ∅ 220 3666664
Weight 9.10kg LMF E krrIP65
100000 cd
60°
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. 34413.000 Graphit m LED 54W 4320lm 4000K neutral white Version 1 Spherolit lens, spot Maximum wind load area 0.09m2
30°
60°
h(m)
334 466666 3 387 4666666 3
Weight 9.10kg LMF E krrIP65
∅ 274 46666 3 ∅ 220 3666664
34410.000 Graphit m LED 36W 2320lm 3000K warm white Version 1 Spherolit lens, narrow spot Maximum wind load area 0.09m2
60°
387 4666666 3
Weight 9.10kg LMF E krrIP65
∅ 274 46666 3 ∅ 220 3666664
34411.000 Graphit m LED 36W 2880lm 4000K neutral white Version 1 Spherolit lens, narrow spot Maximum wind load area 0.09m2
Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Available from 2nd quarter 2012 Accessories page 883
30°
30°
60°
7500 cd
30°
E(lx) 7084 1771 787 443 283 E(lx) 5706 1427 634 357 228 E(lx) 2847 712 316 178 114 E(lx) 2293 573 255 143 92 E(lx)
2 4 6 8 10
1190 298 132 74 48
h(m)
E(lx)
2 4 6 8 10
959 240 107 60 38
ERCO Program 2012
D(m) 16° 0.56 1.12 1.69 2.25 2.81 D(m) 16° 0.56 1.12 1.69 2.25 2.81 D(m) 29° 1.03 2.07 3.10 4.14 5.17 D(m) 29° 1.03 2.07 3.10 4.14 5.17 D(m) 45° 1.66 3.31 4.97 6.63 8.28 D(m) 45° 1.66 3.31 4.97 6.63 8.28
873
Beamer Projector with mounting bracket and LED For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Screw-mounted cover with safety glass:
Weight 2.80kg LMF E rIP44
h(m) 60°
3666 4∅ 120 666666
LED
3666 4∅ 120 666666
LED
34476.000 Graphit m LED 13W 870lm 3000K warm white Version 1 Spherolit lens, wide flood Maximum wind load area 0.03m2
874
ERCO Program 2012
Weight 2.80kg LMF E rIP44
3666 4∅ 120 666666
LED
60°
30°
8000 cd
30°
2 4 6 8 10 h(m)
60°
211 4666 3
60°
3666 4∅ 120 666666
LED
30°
8000 cd
30°
60°
211 4666 3
60°
3666 4∅ 120 666666
LED
193 466 3
30°
4000 cd
30°
60°
211 4666 3
60°
3666 4∅ 120 666666
LED
193 466 3
30°
4000 cd
60°
3666 4∅ 120 666666
LED
193 466 3
30°
60°
30°
2000 cd
60°
3666 4∅ 120 666666
LED
E(lx) 3761 940 418 235 150 E(lx) 3030 758 337 189 121
D(m) 6° 0.21 0.42 0.63 0.84 1.05 D(m) 6° 0.21 0.42 0.63 0.84 1.05
corrosion-resistant cast aluminium, double powder-coated. Without spill light. Mounting accessories to be ordered separately. Available from 2nd quarter 2012 Accessories page 884
211 4666 3
∅ 135 36664 666666 ∅ 96 666666 3664 ∅ 135 36664 666666 ∅ 96 666666 3664 ∅ 135 36664 666666 ∅ 96 666666 3664
30°
211 4666 3
Weight 2.80kg LMF E rIP44
15000 cd
30°
60°
211 4666 3
34477.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1 Spherolit lens, wide flood Maximum wind load area 0.03m2
Weight 2.80kg LMF E rIP44
30°
2 4 6 8 10
h(m)
193 466 3
∅ 135 36664 666666 ∅ 96 666666 3664
34474.000 Graphit m LED 13W 870lm 3000K warm white Version 1 Spherolit lens, flood Maximum wind load area 0.03m2
Weight 2.80kg LMF E rIP44
30°
60°
60°
193 466 3
∅ 135 36664 666666 ∅ 96 666666 3664
34475.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1 Spherolit lens, flood Maximum wind load area 0.03m2
Weight 2.80kg LMF E rIP44
15000 cd
60°
193 466 3
∅ 135 36664 666666 ∅ 96 666666 3664
34472.000 Graphit m LED 13W 870lm 3000K warm white Version 1 Spherolit lens, spot Maximum wind load area 0.03m2
Weight 2.80kg LMF E rIP44
30°
2 4 6 8 10 h(m)
193 466 3
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Screw-mounted cover with safety glass: 34473.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1 Spherolit lens, spot Maximum wind load area 0.03m2
60°
211 4666 3
∅ 135 36664 666666 ∅ 96 666666 3664
193 466 3
211 4666 3
34470.000 Graphit m LED 4.5W 290lm 3000K warm white Version 1 Spherolit lens, narrow spot Maximum wind load area 0.03m2
Weight 2.80kg LMF E rIP44
∅ 135 36664 666666 ∅ 96 666666 3664
34471.000 Graphit m LED 4.5W 360lm 4000K neutral white Version 1 Spherolit lens, narrow spot Maximum wind load area 0.03m2
corrosion-resistant cast aluminium, double powder-coated. Without spill light. Mounting accessories to be ordered separately. Available from 2nd quarter 2012 Accessories page 884
30°
2000 cd
30°
E(lx) 1712 428 190 107 68 E(lx)
2 4 6 8 10
1379 345 153 86 55
h(m)
E(lx)
2 4 6 8 10
666 166 74 42 27
h(m)
E(lx)
2 4 6 8 10
536 134 60 34 21
h(m)
E(lx)
2 4 6 8 10
325 81 36 20 13
h(m)
E(lx)
2 4 6 8 10
262 65 29 16 10
D(m) 16° 0.56 1.12 1.69 2.25 2.81 D(m) 16° 0.56 1.12 1.69 2.25 2.81 D(m) 29° 1.03 2.07 3.10 4.14 5.17 D(m) 29° 1.03 2.07 3.10 4.14 5.17 D(m) 44° 1.62 3.23 4.85 6.46 8.08 D(m) 44° 1.62 3.23 4.85 6.46 8.08
www.erco.com
Beamer Projector with mounting bracket and LED
Weight 6.40kg LMF E rIP44
60°
LED
∅ 120 36664 666666
LED
LED
LED
LED
LED
283 46666 3
www.erco.com
LED
283 46666 3
∅ 120 36664 666666
22500 cd
30°
30°
60°
12500 cd
30°
30°
60°
12500 cd
60°
30°
LED
30°
30°
60°
5500 cd
60°
295 466666 3
Weight 6.40kg LMF E rIP44
∅ 205 366666 4 ∅ 160 36666 4
∅ 120 36664 666666
34456.000 Graphit m LED 40W 2610lm 3000K warm white Version 1 Spherolit lens, wide flood Maximum wind load area 0.06m2
30°
60°
60°
295 466666 3
∅ 205 366666 4 ∅ 160 36666 4
Weight 6.40kg LMF E rIP44
30°
2 4 6 8 10
2 4 6 8 10
2 4 6 8 10 h(m)
283 46666 3
∅ 120 36664 666666
34457.000 Graphit m LED 40W 3240lm 4000K neutral white Version 1 Spherolit lens, wide flood Maximum wind load area 0.06m2
22500 cd
60°
295 466666 3
∅ 205 366666 4 ∅ 160 36666 4
Weight 6.40kg LMF E rIP44
30°
60°
h(m)
283 46666 3
∅ 120 36664 666666
34454.000 Graphit m LED 40W 2610lm 3000K warm white Version 1 Spherolit lens, flood Maximum wind load area 0.06m2
30°
E(lx) D(m) 7° 14139 0.24 3535 0.49 1571 0.73 884 0.98 566 1.22 E(lx) D(m) 7° 0.24 0.49 0.73 0.98 1.22
11390 2847 1266 712 456
corrosion-resistant cast aluminium, double powder-coated. Without spill light. Mounting accessories to be ordered separately. Available from 2nd quarter 2012 Accessories page 884
60°
295 466666 3
∅ 205 366666 4 ∅ 160 36666 4
Weight 6.40kg LMF E rIP44
60000 cd
2 4 6 8 10
h(m)
283 46666 3
∅ 120 36664 666666
34455.000 Graphit m LED 40W 3240lm 4000K neutral white Version 1 Spherolit lens, flood Maximum wind load area 0.06m2
30°
60°
60°
295 466666 3
Weight 6.40kg LMF E rIP44
∅ 205 366666 4 ∅ 160 36666 4
∅ 120 36664 666666
34452.000 Graphit m LED 40W 2610lm 3000K warm white Version 1 Spherolit lens, spot Maximum wind load area 0.06m2
30°
2 4 6 8 10
h(m)
283 46666 3 295 466666 3
∅ 205 366666 4 ∅ 160 36666 4
Weight 6.40kg LMF E rIP44
60000 cd
60°
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Screw-mounted cover with safety glass: 34453.000 Graphit m LED 40W 3240lm 4000K neutral white Version 1 Spherolit lens, spot Maximum wind load area 0.06m2
30°
60°
h(m)
283 46666 3 295 466666 3
Weight 6.40kg LMF E rIP44
∅ 205 366666 4 ∅ 160 36666 4
∅ 120 36664 666666
34450.000 Graphit m LED 20W 1305lm 3000K warm white Version 1 Spherolit lens, narrow spot Maximum wind load area 0.06m2
corrosion-resistant cast aluminium, double powder-coated. Without spill light. Mounting accessories to be ordered separately. Available from 2nd quarter 2012 Accessories page 884
h(m)
283 46666 3 295 466666 3
34451.000 Graphit m LED 20W 1620lm 4000K neutral white Version 1 Spherolit lens, narrow spot Maximum wind load area 0.06m2
∅ 205 366666 4 ∅ 160 36666 4
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Screw-mounted cover with safety glass:
30°
60°
5500 cd
30°
E(lx) 4812 1203 535 301 192 E(lx) 3876 969 431 242 155 E(lx) 2181 545 242 136 87 E(lx)
2 4 6 8 10
1759 440 195 110 70
h(m)
E(lx)
2 4 6 8 10
884 221 98 55 35
h(m)
E(lx)
2 4 6 8 10
712 178 79 44 28
ERCO Program 2012
D(m) 17° 0.60 1.20 1.79 2.39 2.99 D(m) 17° 0.60 1.20 1.79 2.39 2.99 D(m) 27° 0.96 1.92 2.88 3.84 4.80 D(m) 27° 0.96 1.92 2.88 3.84 4.80 D(m) 42° 1.54 3.07 4.61 6.14 7.68 D(m) 42° 1.54 3.07 4.61 6.14 7.68
875
Beamer Projector with mounting bracket and LED For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Screw-mounted cover with safety glass:
h(m)
334 466666 3
∅ 120 666666 36664
LED
∅ 120 666666 36664
LED
LED
LED
LED
LED
ERCO Program 2012
30°
16500 cd
30°
30°
60°
16500 cd
30°
30°
60°
7500 cd
60°
346 4666666 3 ∅ 120 666666 36664
876
LED
334 466666 3 ∅ 274 46666 3 ∅ 220 3666664
Weight 9.60kg LMF E rIP44
30°
60°
60°
346 4666666 3 ∅ 120 666666 36664
34466.000 Graphit m LED 54W 3480lm 3000K warm white Version 1 Spherolit lens, wide flood Maximum wind load area 0.09m2
35000 cd
2 4 6 8 10
2 4 6 8 10
2 4 6 8 10 h(m)
334 466666 3 ∅ 274 46666 3 ∅ 220 3666664
Weight 9.60kg LMF E rIP44
30°
60°
60°
346 4666666 3 ∅ 120 666666 36664
34467.000 Graphit m LED 54W 4320lm 4000K neutral white Version 1 Spherolit lens, wide flood Maximum wind load area 0.09m2
30°
2 4 6 8 10
h(m)
334 466666 3 ∅ 274 46666 3 ∅ 220 3666664
Weight 9.60kg LMF E rIP44
35000 cd
60°
346 4666666 3 ∅ 120 666666 36664
34464.000 Graphit m LED 54W 3480lm 3000K warm white Version 1 Spherolit lens, flood Maximum wind load area 0.09m2
30°
60°
h(m)
334 466666 3 ∅ 274 46666 3 ∅ 220 3666664
Weight 9.60kg LMF E rIP44
30°
LED
E(lx) D(m) 7° 21503 0.24 5376 0.49 2389 0.73 1344 0.98 860 1.22 E(lx) D(m) 7° 0.24 0.49 0.73 0.98 1.22
17322 4330 1925 1083 693
corrosion-resistant cast aluminium, double powder-coated. Without spill light. Mounting accessories to be ordered separately. Available from 2nd quarter 2012 Accessories page 884
60°
346 4666666 3 ∅ 120 666666 36664
34465.000 Graphit m LED 54W 4320lm 4000K neutral white Version 1 Spherolit lens, flood Maximum wind load area 0.09m2
100000 cd
2 4 6 8 10
h(m)
334 466666 3 ∅ 274 46666 3 ∅ 220 3666664
Weight 9.60kg LMF E rIP44
30°
60°
60°
346 4666666 3 ∅ 120 666666 36664
34462.000 Graphit m LED 54W 3480lm 3000K warm white Version 1 Spherolit lens, spot Maximum wind load area 0.09m2
30°
2 4 6 8 10
h(m)
334 466666 3 ∅ 274 46666 3 ∅ 220 3666664
Weight 9.60kg LMF E rIP44
100000 cd
60°
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Screw-mounted cover with safety glass: 34463.000 Graphit m LED 54W 4320lm 4000K neutral white Version 1 Spherolit lens, spot Maximum wind load area 0.09m2
30°
60°
h(m)
334 466666 3 346 4666666 3
Weight 9.60kg LMF E rIP44
∅ 274 46666 3 ∅ 220 3666664
34460.000 Graphit m LED 36W 2320lm 3000K warm white Version 1 Spherolit lens, narrow spot Maximum wind load area 0.09m2
60°
346 4666666 3
Weight 9.60kg LMF E rIP44
∅ 274 46666 3 ∅ 220 3666664
34461.000 Graphit m LED 36W 2880lm 4000K neutral white Version 1 Spherolit lens, narrow spot Maximum wind load area 0.09m2
corrosion-resistant cast aluminium, double powder-coated. Without spill light. Mounting accessories to be ordered separately. Available from 2nd quarter 2012 Accessories page 884
30°
30°
60°
7500 cd
30°
E(lx) 7084 1771 787 443 283 E(lx) 5706 1427 634 357 228 E(lx) 2847 712 316 178 114 E(lx) 2293 573 255 143 92 E(lx)
2 4 6 8 10
1190 298 132 74 48
h(m)
E(lx)
2 4 6 8 10
959 240 107 60 38
D(m) 16° 0.56 1.12 1.69 2.25 2.81 D(m) 16° 0.56 1.12 1.69 2.25 2.81 D(m) 29° 1.03 2.07 3.10 4.14 5.17 D(m) 29° 1.03 2.07 3.10 4.14 5.17 D(m) 45° 1.66 3.31 4.97 6.63 8.28 D(m) 45° 1.66 3.31 4.97 6.63 8.28
www.erco.com
Beamer Projector with mounting plate for low-voltage halogen lamps Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. Safety transformer 230/12V. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver, mirrorfinish anodised. Screw-fastened snoot with safety glass:
h(m)
4193 663
60°
36664∅ 120 66666666
QT12-ax-RE
30°
18000 cd
30°
2 4 6 8 10
∅ 153 36664 666666
60°
QT12-ax
E(lx) 3726 932 414 233 149
D(m) 9° 0.31 0.63 0.94 1.26 1.57
corrosion-resistant cast aluminium, double powder-coated. Cross-baffle: metal, black lacquered. Cut-off angle 50°. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Accessories page 883
h(m)
283 46666 3 336 466666 3
Weight 6.90kg LMF E I0qp krrIP65
∅ 205 36666 4 ∅ 160 366664
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. Safety transformer 230/12V. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver, mirrorfinish anodised. Screw-fastened snoot with safety glass: 34001.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm Spot reflector Maximum wind load area 0.06m2
60°
238 4666 3
Weight 3.00kg LMF E I0qp krrIP65
∅ 135 36664 66666666 ∅ 96 3664 66666666
34000.000 Graphit m QT12-ax-RE 50W 12V GY6.35 1250lm Spot reflector Maximum wind load area 0.03m2
corrosion-resistant cast aluminium, double powder-coated. Cross-baffle: metal, black lacquered. Cut-off angle 50°. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Accessories page 883
30°
60°
40000 cd
30°
2 4 6 8 10
E(lx) 9300 2325 1033 581 372
D(m) 10° 0.35 0.70 1.05 1.40 1.75
Beamer Projector with mounting bracket for low-voltage halogen lamps For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Safety transformer 230/12V. Heatresistant cable with plug. Reflector: aluminium, silver, mirrorfinish anodised. Screw-fastened snoot with safety glass: corrosion-resistant cast aluminium,
www.erco.com
h(m)
193 466 3
60°
60°
211 4666 3
Weight 2.80kg LMF E I0qp rIP44
∅ 135 36664 666666 ∅ 96 666666 3664
34050.000 Graphit m QT12-ax-RE 50W 12V GY6.35 1250lm Spot reflector Maximum wind load area 0.03m2
double powder-coated. Cross-baffle: metal, black lacquered. Cut-off angle 50°. Without spill light. Mounting accessories to be ordered separately. Accessories page 884
3666 4∅ 120 666666
QT12-ax-RE
30°
18000 cd
30°
2 4 6 8 10
E(lx) 3726 932 414 233 149
ERCO Program 2012
D(m) 9° 0.31 0.63 0.94 1.26 1.57
877
Beamer Projector with mounting bracket for low-voltage halogen lamps
Weight 6.40kg LMF E I0qp rIP44
double powder-coated. Cross-baffle: metal, black lacquered. Cut-off angle 50°. Without spill light. Mounting accessories to be ordered separately. Accessories page 884
h(m)
283 46666 3
60°
295 466666 3
34051.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm Spot reflector Maximum wind load area 0.06m2
∅ 205 366666 4 ∅ 160 36666 4
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Safety transformer 230/12V. Heatresistant cable with plug. Reflector: aluminium, silver, mirrorfinish anodised. Screw-fastened snoot with safety glass: corrosion-resistant cast aluminium,
∅ 120 36664 666666
QT12-ax
30°
60°
40000 cd
30°
2 4 6 8 10
E(lx) 9300 2325 1033 581 372
D(m) 10° 0.35 0.70 1.05 1.40 1.75
Beamer Projector with mounting plate for PAR lamps
Weight 5.80kg LMF E I0qp krrIP65
metal, black lacquered. Cut-off angle 50°. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Accessories page 883
h(m)
283 46666 3
60°
336 466666 3
34003.000 Graphit m PAR38 120W 230V E27 12° PAR38 120W 230V E27 30° Maximum wind load area 0.06m2
∅ 205 36666 4 ∅ 160 366664
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Screw-fastened snoot with safety glass: corrosion-resistant cast aluminium, double powder-coated. Cross-baffle:
∅ 153 36664 666666
PAR38
30°
60°
10000 cd
60°
PAR38
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Screw-fastened snoot with safety glass: corrosion-resistant cast aluminium, double powder-coated. Cross-baffle: 334 466666 3
153 3∅666 4
60°
4000 cd
PAR56
30°
60°
40000 cd
60°
PAR56
878
ERCO Program 2012
30°
2 4 6 8 10
2193 548 244 137 88
h(m)
E(lx)
2 4 6 8 10
731 183 81 46 29
D(m) 12° 0.42 0.84 1.26 1.68 2.10 D(m) 30° 1.07 2.14 3.22 4.29 5.36
metal, black lacquered. Cut-off angle 50°. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Accessories page 883
60°
387 4666666 3
Weight 9.10kg LMF E I0qp krrIP65
∅ 274 46666 3 ∅ 220 366666 4
34007.000 Graphit m PAR56 300W 230V GX16d 9° 15° PAR56 300W 230V GX16d 16° 40° Maximum wind load area 0.09m2
30°
30°
E(lx)
30°
30°
60°
12500 cd
30°
h(m) E(lx) D(m) 9° 2 8620 0.31 4 2155 0.63 6 958 0.94 8 539 1.26 10 345 1.57
15° 0.53 1.05 1.58 2.11 2.63
h(m) E(lx) D(m) 16° 2 1940 0.56 4 485 1.12 6 216 1.69 8 121 2.25 10 78 2.81
40° 1.46 2.91 4.37 5.82 7.28
www.erco.com
Beamer Projector with mounting bracket for PAR lamps
Weight 5.10kg LMF E I0qp rIP44
Mounting accessories to be ordered separately. Accessories page 884
h(m)
283 46666 3
60°
295 466666 3
34053.000 Graphit m PAR38 120W 230V E27 12° PAR38 120W 230V E27 30° Maximum wind load area 0.06m2
∅ 205 366666 4 ∅ 160 36666 4
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Heat-resistant cable with plug. Screw-fastened snoot with safety glass: corrosion-resistant cast aluminium, double powder-coated. Cross-baffle: metal, black lacquered. Cut-off angle 50°. Without spill light.
∅ 120 36664 666666
PAR38
30°
60°
10000 cd
60°
PAR38
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Heat-resistant cable with plug. Screw-fastened snoot with safety glass: corrosion-resistant cast aluminium, double powder-coated. Cross-baffle: metal, black lacquered. Cut-off angle 50°. Without spill light. 334 466666 3
∅ 120 666666 36664
60°
4000 cd
PAR56
30°
60°
40000 cd
60°
PAR56
30°
2 4 6 8 10
2193 548 244 137 88
h(m)
E(lx)
2 4 6 8 10
731 183 81 46 29
D(m) 12° 0.42 0.84 1.26 1.68 2.10 D(m) 30° 1.07 2.14 3.22 4.29 5.36
Mounting accessories to be ordered separately. Accessories page 884
60°
346 4666666 3
Weight 8.20kg LMF E I0qp rIP44
∅ 274 46666 3 ∅ 220 3666664
34063.000 Graphit m PAR56 300W 230V GX16d 9° 15° PAR56 300W 230V GX16d 16° 40° Maximum wind load area 0.09m2
30°
30°
E(lx)
30°
30°
60°
12500 cd
30°
h(m) E(lx) D(m) 9° 2 8620 0.31 4 2155 0.63 6 958 0.94 8 539 1.26 10 345 1.57
15° 0.53 1.05 1.58 2.11 2.63
h(m) E(lx) D(m) 16° 2 1940 0.56 4 485 1.12 6 216 1.69 8 121 2.25 10 78 2.81
40° 1.46 2.91 4.37 5.82 7.28
Beamer Projector with mounting plate for metal halide lamps
Weight 7.00kg LMF E I krrIP65
∅ 153 36664 666666
www.erco.com
double powder-coated. Cross-baffle: metal, black lacquered. Cut-off angle 50°. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Accessories page 883
h(m)
283 46666 3
60°
336 466666 3
34070.000 Graphit m ECG HIT-CE 20W G12 1800lm Spot reflector Electronic control gear. Maximum wind load area 0.06m2
∅ 205 36666 4 ∅ 160 366664
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver, mirrorfinish anodised. Screw-fastened snoot with safety glass: corrosion-resistant cast aluminium,
HIT-CE
30°
60°
65000 cd
30°
1 2 3 4 5
E(lx) D(m) 7° 50654 0.12 12663 0.24 5628 0.37 3166 0.49 2026 0.61
ERCO Program 2012
879
Weight 7.00kg LMF E I0qp krrIP65
34005.000 Graphit m HIT-CE 70W G12 6600lm Spot reflector Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. Maximum wind load area 0.06m2
Weight 7.30kg LMF E I0qp krrIP65
h(m)
283 46666 3
∅ 153 36664 666666
HIT-CE
∅ 153 36664 666666
HIT-CE
HIT-CE
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor. Capacitor. Reflector: aluminium, silver, mirrorfinish anodised.
532 466666666 3
∅ 153 66666 36664
ERCO Program 2012
30°
60°
250000 cd
30°
2 4 6 8 10
HIT-DE
30°
60°
500000 cd
60°
HIT-DE
E(lx) D(m) 9° 19698 0.31 4924 0.63 2189 0.94 1231 1.26 788 1.57
E(lx) D(m) 8° 53987 0.28 13497 0.56 5999 0.84 3374 1.12 2159 1.40
Screw-fastened snoot with safety glass: corrosion-resistant cast aluminium, double powder-coated. Cross-baffle: metal, black lacquered. Cut-off angle 50°. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Accessories page 885
30°
2 4 6 8 10 h(m)
∅ 153 66666 36664
880
30°
E(lx) D(m) 9° 12753 0.31 3188 0.63 1417 0.94 797 1.26 510 1.57
Screw-fastened snoot with safety glass: corrosion-resistant cast aluminium, double powder-coated. Cross-baffle: metal, black lacquered. Cut-off angle 50°. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Accessories page 883
60°
490 466666666 3 532 466666666 3
Weight 21.80kg LMF E 0qp krrIP65
∅ 402 4666666 3 ∅ 325 4666663
34010.000 Graphit m HIT-DE 400W Fc2 35000lm Spot reflector Maximum wind load area 0.18m2
100000 cd
2 4 6 8 10
h(m)
490 466666666 3 ∅ 402 4666666 3 ∅ 325 4666663
Weight 19.50kg LMF E 0qp krrIP65
30°
60°
60°
387 4666666 3 153 3∅666 4
34009.000 Graphit m HIT-DE 250W Fc2 20000lm Spot reflector Maximum wind load area 0.18m2
30°
2 4 6 8 10
h(m)
334 466666 3 ∅ 274 46666 3 ∅ 220 366666 4
Weight 10.60kg LMF E I0qp krrIP65
75000 cd
60°
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor. Capacitor. Reflector: aluminium, silver, mirrorfinish anodised. 34008.000 Graphit m HIT-CE 150W G12 14000lm Spot reflector Maximum wind load area 0.09m2
30°
60°
h(m)
283 46666 3 336 466666 3
∅ 205 36666 4 ∅ 160 366664
60°
336 466666 3
34004.000 Graphit m HIT-CE 35W G12 3300lm Spot reflector Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. Maximum wind load area 0.06m2
∅ 205 36666 4 ∅ 160 366664
Beamer Projector with mounting plate for metal halide lamps
30°
60°
400000 cd
30°
2 4 6 8 10
E(lx) D(m) 8° 104393 0.28 26098 0.56 11599 0.84 6525 1.12 4176 1.40 E(lx) D(m) 9° 95966 0.31 23991 0.63 10663 0.94 5998 1.26 3839 1.57
www.erco.com
Beamer Projector with mounting bracket for metal halide lamps
Weight 6.50kg LMF E I rIP44
34058.000 Graphit m HIT-CE 70W G12 6600lm Spot reflector Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. Maximum wind load area 0.06m2
Weight 6.80kg LMF E I0qp rIP44
HIT-CE
HIT-CE
283 46666 3
HIT-CE
1 2 3 4 5
75000 cd
30°
30°
60°
100000 cd
30°
HIT-CE
E(lx) D(m) 9° 0.31 0.63 0.94 1.26 1.57
12753 3188 1417 797 510
h(m)
E(lx) D(m) 9° 19698 0.31 4924 0.63 2189 0.94 1231 1.26 788 1.57
2 4 6 8 10
corrosion-resistant cast aluminium, double powder-coated. Cross-baffle: metal, black lacquered. Cut-off angle 50°. Without spill light. Mounting accessories to be ordered separately. Accessories page 884
60°
346 4666666 3
∅ 274 46666 3 ∅ 220 3666664
30°
E(lx) D(m) 7° 50654 0.12 12663 0.24 5628 0.37 3166 0.49 2026 0.61
2 4 6 8 10
h(m)
334 466666 3
∅ 120 666666 36664
www.erco.com
30°
60°
60°
295 466666 3
∅ 120 36664 666666
Weight 9.60kg LMF E I0qp rIP44
65000 cd
60°
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. Heat-resistant cable with plug. Reflector: aluminium, silver, mirrorfinish anodised. Screw-fastened snoot with safety glass: 34065.000 Graphit m HIT-CE 150W G12 14000lm Spot reflector Maximum wind load area 0.09m2
30°
60°
h(m)
283 46666 3
∅ 120 36664 666666
∅ 205 366666 4 ∅ 160 36666 4
60°
295 466666 3
Weight 6.50kg LMF E I0qp rIP44
∅ 205 366666 4 ∅ 160 36666 4
∅ 120 36664 666666
34055.000 Graphit m HIT-CE 35W G12 3300lm Spot reflector Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. Maximum wind load area 0.06m2
metal, black lacquered. Cut-off angle 50°. Without spill light. Mounting accessories to be ordered separately. Accessories page 884
h(m)
283 46666 3 295 466666 3
34071.000 Graphit m ECG HIT-CE 20W G12 1800lm Spot reflector Electronic control gear. Maximum wind load area 0.06m2
∅ 205 366666 4 ∅ 160 36666 4
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Heat-resistant cable with plug. Reflector: aluminium, silver, mirrorfinish anodised. Screw-fastened snoot with safety glass: corrosion-resistant cast aluminium, double powder-coated. Cross-baffle:
30°
60°
250000 cd
30°
2 4 6 8 10
E(lx) D(m) 8° 53987 0.28 13497 0.56 5999 0.84 3374 1.12 2159 1.40
ERCO Program 2012
881
Beamer Projector with mounting bracket for metal halide lamps
490 466666666 3
34067.000 Graphit m HIT-DE 400W Fc2 35000lm Spot reflector Maximum wind load area 0.18m2
Weight 21.10kg LMF E 0 q p rIP44
∅ 402 46666666 3 ∅ 325 4666663
∅ 120 666666 36664 490 466666666 3
∅ 120 666666 36664
corrosion-resistant cast aluminium, double powder-coated. Cross-baffle: metal, black lacquered. Cut-off angle 50°. Without spill light. Mounting accessories to be ordered separately. Accessories page 885
h(m) 60°
491 466666666 3
Weight 18.80kg LMF E 0 q p rIP44
HIT-DE
30°
60°
500000 cd
30°
2 4 6 8 10 h(m)
60°
491 466666666 3
34066.000 Graphit m HIT-DE 250W Fc2 20000lm Spot reflector Maximum wind load area 0.18m2
∅ 402 46666666 3 ∅ 325 4666663
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Heat-resistant cable with plug. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor. Capacitor. Reflector: aluminium, silver, mirrorfinish anodised. Screw-fastened snoot with safety glass:
HIT-DE
30°
60°
400000 cd
30°
2 4 6 8 10
E(lx) D(m) 8° 104393 0.28 26098 0.56 11599 0.84 6525 1.12 4176 1.40 E(lx) D(m) 9° 0.31 0.63 0.94 1.26 1.57
95966 23991 10663 5998 3839
Beamer 34959.000
34957.000 34961.000 34962.000
34959.000
34963.000
34963.000
34950.000
∅ 120
∅ 89
∅ 89
∅ 89
34958.000 34960.000
34958.000
34950.000
34957.000
∅ 76
882
ERCO Program 2012
∅ 76
∅ 76
www.erco.com
00 0 .0
00
34007.000 34008.000 34410.000 34411.000 34412.000 34413.000 34414.000 34415.000 34416.000 34417.000
• •
.00 0
.00 0
33 98 1
.00 0
33 97 4
.00 0
34 97 4
.00 0
83 82 9
.00 0
74 46 6
33 98 2
34 99 1
• •
• •
• •
• •
• •
• •
• •
• •
•
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
.00 0
34
• • • • • • • • • • • • •
.00 0
99
2.0 33
• • • • • • • • • • • • •
.00 0
98
1.0 33
• • • • • • • • • • • • •
74 46 5
98
4.0 33
• • • • • • • • • • • • •
74 46 4
97
4.0 34
• • • • • • • • • • • • •
.00 0
97
9.0 83
• •
74 46 3
82
2.0 74
• • • • •
.00 0
46
1.0 74
• • • • •
.00 0
46
0.0 74
• • • • •
74 46 9
46
9.0 74
• • • • •
74 47 2
45
8.0 74
• • • • •
.00 0
46
1.0 74
• • • • •
.00 0
47
8.0 74
• • • • •
74 43 9
43
3.0 74
• • • • •
74 47 4
47
3.0 74
• • • • •
.00 0
40
www.erco.com
1.0
34001.000 34003.000 34004.000 34005.000 34070.000 34400.000 34401.000 34402.000 34403.000 34404.000 34405.000 34406.000 34407.000
00
• • • • • • • • •
00
99 34
• • • • • • • • •
00
• • • • • • • • •
00
33
98
2 .0
00 9 .0
00 97 33
• • • • • • • • •
00
•
00
34
97
4 .0
00 9 .0
00
•
00
83
82
4 .0
00 43 74
•
00
•
00
74
43
3 .0
00 2 .0
00
•
00
74
43
1 .0
00 43 74
•
00
•
00
74
48
3 .0
00 2 .0
00 48
•
00
74
43
7 .0
00 5 .0
•
00
74
18 77
•
00
74
34000.000 34420.000 34421.000 34422.000 34423.000 34424.000 34425.000 34426.000 34427.000
74 40 4
40
2 .0
00
Beamer Accessories
ERCO Program 2012
883
48 00 7 4 2 .0 48 00 7 4 3 .0 43 00 7 4 1 .0 43 00 7 4 2 .0 43 00 3 .0 74 00 43 4 .0 00 83 82 9 .0 34 00 96 3 4 4 .0 96 00 5 .0 34 00 97 4 .0 00 33 97 5 .0 00 33 98 0 .0 00 33 98 2 .0 34 00 96 3 4 2 .0 96 00 3 4 3 .0 95 00 3 4 8 .0 95 00 3 4 9 .0 96 00 3 4 0 .0 96 00 1 .0 34 00 95 0 .0 00 34 95 7 .0 00
00
7 .0
74
74
34051.000 34053.000 34055.000 34058.000 34071.000 34450.000 34451.000 34452.000 34453.000 34454.000 34455.000 34456.000 34457.000
• • • • •
• • • • •
• • • • •
34063.000 34065.000 34460.000 34461.000 34462.000 34463.000 34464.000 34465.000 34466.000 34467.000
• •
• •
•
•
•
•
•
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
47 00 74 1.0 46 00 74 8.0 45 00 74 9.0 46 00 74 0.0 46 00 1.0 74 00 46 2.0 00 83 82 9.0 34 00 96 34 4.0 96 00 5.0 34 00 97 4.0 00 33 97 5.0 00 33 98 0.0 00 33 98 2.0 34 00 96 34 2.0 96 00 34 3.0 95 00 34 8.0 95 00 34 9.0 96 00 34 0.0 96 00 1.0 34 00 95 0.0 00 34 95 7.0 00
•
8.0
74
43
3.0
00
•
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • • • • • • •
.00 0
47
3.0 40
74
•
74 47 4.0 74 00 43 74 9.0 47 00 74 2.0 46 00 74 9.0 46 00 74 3.0 46 00 74 4.0 46 00 5.0 74 00 46 6.0 00 83 82 9.0 34 00 96 34 4.0 96 00 5.0 34 00 97 4.0 00 33 97 5.0 00 33 98 0.0 00 33 98 2.0 34 00 96 34 2.0 96 00 34 3.0 95 00 34 8.0 95 00 34 9.0 96 00 34 0.0 96 00 1.0 34 00 95 0.0 00 34 95 7.0 00
43
5 .0
74
•
74
18 77
•
00
74
34050.000 34470.000 34471.000 34472.000 34473.000 34474.000 34475.000 34476.000 34477.000
74 40 4
40
2 .0
00
Beamer Accessories
884
ERCO Program 2012
• •
• •
• •
• •
• •
• •
• •
•
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
www.erco.com
00 1 .0
00 34
99
33
98
2 .0
00 1 .0
00 33
98
33
97
4 .0
00 4 .0
00 34
97
9 .0
00 74
49
74
49
8 .0
00 7 .0
00 74
49
6 .0
00 74
49
74
49
4 .0
00 5 .0
00 49 74
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
34066.000 34067.000
• •
• •
• •
• •
• •
• •
• •
• •
74471.000 74472.000 74482.000 74495.000 Skintone filter
• •
• •
• •
74468.000 74469.000 74483.000 74494.000 Daylight conversion filter
• •
• •
74431.000 74459.000 74463.000 74496.000 Interference colour filter Magenta
• •
• •
• •
• •
• •
74432.000 74460.000 74464.000 74497.000 Interference colour filter Amber 90 4666666 3 45 466 3
74437.000 74438.000 74439.000 74493.000 Softec lens
• •
• •
• •
• •
74433.000 74461.000 74465.000 74498.000 Interference colour filter Sky blue
• •
74434.000 74462.000 74466.000 74499.000 Interference colour filter Night blue 65 3666 4
58 70 3 46666 3 4666
74402.000 Mounting ring for max. 2 filters or lenses. Stainless steel, black powdercoated.
www.erco.com
74403.000 Mounting ring for max. 2 filters or lenses. Aluminium, black powder-coated.
74404.000 Mounting ring for max. 2 filters or lenses. Aluminium, black powder-coated.
74407.000 Mounting ring for max. 2 filters or lenses. Aluminium, black powder-coated.
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
65 3666 4 160 466666 3
2.0
49
49
7.0 40
74473.000 74474.000 74492.000 77185.000 Sculpture lens
74 3.0 49 00 74 5.0 49 00 74 4.0 49 00 74 6.0 49 00 74 7.0 49 00 8.0 74 00 49 9.0 34 00 96 34 4.0 96 00 5.0 34 00 97 4.0 00 33 97 5.0 00 33 98 0.0 00 33 98 2.0 34 00 96 34 2.0 96 00 34 3.0 95 00 34 8.0 95 00 9.0 34 00 96 0.0 00 34 96 1.0 00 34 95 0.0 00 34 95 7.0 00
• •
74
49
3 .0
00 2 .0
74
• •
00
• •
74
49 74
• •
00
74
34009.000 34010.000
74
40
7 .0
00
Beamer Accessories
34964.000 Cable junction box Plastic, black. Terminal block 2 of 5x2.5mm2 . 1 fuse D01 E14 10A. Weight 0.25kg
ERCO Program 2012
885
34962.000 Post Metal, hot-dip galvanised. Graphit m, double powder-coated. Mounting plate: metal. 5-pole terminal block for cable 5x2.5mm2 . Through-wiring possible. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP44 in connection with mounted luminaire. Weight 5.60kg
886
ERCO Program 2012
∅ 60
33974.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 2.30kg
6663664
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
200 466666 3
200 466666 3
33980.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.30kg
24 66 3664
33981.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.76kg
3666666 4∅ 89
34963.000 Post for adapter sleeves. Metal, hot-dip galvanised. Graphit m, double powder-coated. Mounting plate: metal. 5-pole terminal block for cable 5x2.5mm2 . Through-wiring possible. IP44 protection mode when used with relevant accessories. Not for concrete anchor 33980.000 and mounting plate 33982.000. Weight 1.50kg
d 260 46666666 3
d 124 4 6663
d 124 4 6663
33982.000 Mounting plate Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 1.70kg
∅ 116
4663
34958.000 Adapter sleeve for poles ø 76mm and cantilever arms. Housing and cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powdercoated. Screw fixing. Terminal block 5x2,5mm2 . Throughwiring possible. 2 cable entries for cantilever arms. Protection mode IP44 only with accessories. Cantilever arms to be ordered separately. Poles ø 76mm to be ordered separately. Weight 3.80kg
∅ 116 297 466666666 3
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
579 46666666666 3
200 466666 3 693 64666666666666 3
36666666 4∅ 120
3664 6666
∅ 60 666 3664
d 124 4 6663
33979.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.25kg
∅ 83
297 466666666 3
34965.000 Cable junction box Plastic, grey. Terminal block 2 of 5x6mm2 . 1 fuse D01 E14 10A. Weight 0.55kg
∅ 115 36664 6666
502 6466666666 3
75 36666 4
260 4666666666 3
62 3666 4
600 466666666 3
Beamer Accessories
4663
34959.000 Adapter sleeve for posts ø 89mm and cantilever arms. Housing and cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powdercoated. Screw fixing. Terminal block 5x2,5mm2 . Throughwiring possible. 2 cable entries for cantilever arms. Protection mode IP44 only with accessories. Posts ø 89mm and cantilever arms to be ordered separately. Weight 3.20kg
www.erco.com
34961.000 Adapter sleeve for posts ø 89mm. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Screw fixing. 3-pole terminal block for control line. Through-wiring possible. Luminaire rotatable through 360°. Protection mode IP44 only with mounted luminaire. Weight 1.95kg
120 4666 3
34950.000 Cantilever arm For mounting on adapter sleeve or wall. For standing luminaire installation. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Inspection cover: corrosion-resistant aluminium, double powder-coated in graphit m. 1 cable entry. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP44 in connection with mounted luminaire. Weight 3.55kg
34957.000 Side-mounted sleeve For mounting on adapter sleeve. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. 1 cable entry. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP65 only with mounted luminaire. Weight 0.90kg
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. LED module: high-power LEDs on metal-core PCB. Collimating lens
made of optical polymer. Lens rotatable through 360°. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Available from 2nd quarter 2012 Accessories page 890
120
3666 420
3666 420 34990.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.16kg
161 466666 3
153 466666 3
4666663
34960.000 Adapter sleeve for poles ø 76mm. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Screw fixing. 3-pole terminal block for control line. Through-wiring possible. Luminaire rotatable through 360°. Protection mode IP44 only with mounted luminaire. Weight 2.55kg
407 466666 3
83 466 3
160 46666 3
120 176 3666 4 463
120 4∅666 3
160 46666 3
120 4∅666 3
150 95 3∅666 4 3664
Beamer Accessories
34991.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.23kg
www.erco.com
Weight 3.60kg LMF E krrIP65
4193 663
60°
238 4666 3
60°
36664∅ 120 66666666
LED
4193 663
30°
2600 cd
60°
30°
60°
238 4666 3
34428.000 Graphit m LED 13W 870lm 3000K warm white Version 1 Spherolit lens, oval flood Maximum wind load area 0.03m2
Weight 3.60kg LMF E krrIP65
∅ 135 36664 66666666 ∅ 96 3664 66666666
34429.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1 Spherolit lens, oval flood Maximum wind load area 0.03m2
∅ 135 36664 66666666 ∅ 96 3664 66666666
Beamer Floodlight with mounting plate and LED
36664∅ 120 66666666
LED
30°
2600 cd
30°
h(m) E(lx) D(m) 54° 1 1833 1.02 2 458 2.04 3 204 3.06 4 115 4.08 5 73 5.10
17° 0.30 0.60 0.90 1.20 1.49
h(m) E(lx) D(m) 54° 1 1477 1.02 2 369 2.04 3 164 3.06 4 92 4.08 5 59 5.10
17° 0.30 0.60 0.90 1.20 1.49
ERCO Program 2012
887
Beamer Floodlight with mounting plate and LED
Weight 6.90kg LMF E krrIP65
283 46666 3
Weight 6.90kg LMF E krrIP65
LED
283 46666 3
∅ 153 36664 666666
LED
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. LED module: high-power LEDs on metal-core PCB. Collimating lens 334 466666 3
153 3∅666 4
LED
334 466666 3
153 3∅666 4
30°
LED
30°
60°
7500 cd
30°
h(m) E(lx) D(m) 40° 1 5516 0.73 2 1379 1.46 3 613 2.18 4 345 2.91 5 221 3.64
19° 0.33 0.67 1.00 1.34 1.67
h(m) E(lx) D(m) 40° 1 4443 0.73 2 1111 1.46 3 494 2.18 4 278 2.91 5 178 3.64
19° 0.33 0.67 1.00 1.34 1.67
made of optical polymer. Lens rotatable through 360°. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Available from 2nd quarter 2012 Accessories page 890
30°
60°
11000 cd
60°
387 4666666 3
Weight 9.10kg LMF E krrIP65
∅ 274 46666 3 ∅ 220 366666 4
34418.000 Graphit m LED 54W 3480lm 3000K warm white Version 1 Spherolit lens, oval flood Maximum wind load area 0.09m2
7500 cd
60°
387 4666666 3
Weight 9.10kg LMF E krrIP65
∅ 274 46666 3 ∅ 220 366666 4
34419.000 Graphit m LED 54W 4320lm 4000K neutral white Version 1 Spherolit lens, oval flood Maximum wind load area 0.09m2
30°
60°
60°
336 466666 3
34408.000 Graphit m LED 40W 2610lm 3000K warm white Version 1 Spherolit lens, oval flood Maximum wind load area 0.06m2
∅ 205 36666 4 ∅ 160 366664
∅ 153 36664 666666
made of optical polymer. Lens rotatable through 360°. Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Without spill light. Protection mode IP65: dust-proof and water jet-proof. Available from 2nd quarter 2012 Accessories page 890
60°
336 466666 3
34409.000 Graphit m LED 40W 3240lm 4000K neutral white Version 1 Spherolit lens, oval flood Maximum wind load area 0.06m2
∅ 205 36666 4 ∅ 160 366664
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. LED module: high-power LEDs on metal-core PCB. Collimating lens
30°
30°
60°
11000 cd
30°
h(m) E(lx) D(m) 46° 1 7544 0.85 2 1886 1.70 3 838 2.55 4 472 3.40 5 302 4.24
19° 0.33 0.67 1.00 1.34 1.67
h(m) E(lx) D(m) 46° 1 6077 0.85 2 1519 1.70 3 675 2.55 4 380 3.40 5 243 4.24
19° 0.33 0.67 1.00 1.34 1.67
Indre Quay, Haugesund. Architect: Smedsvig Landskapsarkitekter AS, Bergen. Electrical engineering: Multiconsult AS, Nesttun; Cowi AS, Haugesund.
888
ERCO Program 2012
www.erco.com
Beamer Floodlight with mounting bracket and LED For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Lens rotatable through 360°.
Weight 2.80kg LMF E rIP44
60°
3666 4∅ 120 666666
LED
193 466 3
3666 4∅ 120 666666
LED
283 46666 3
LED
283 46666 3
∅ 120 36664 666666
LED
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Lens rotatable through 360°. 334 466666 3
∅ 120 666666 36664 334 466666 3
∅ 120 666666 36664
www.erco.com
LED
2600 cd
LED
30°
h(m) E(lx) D(m) 54° 1 1833 1.02 2 458 2.04 3 204 3.06 4 115 4.08 5 73 5.10
17° 0.30 0.60 0.90 1.20 1.49
h(m) E(lx) D(m) 54° 1 1477 1.02 2 369 2.04 3 164 3.06 4 92 4.08 5 59 5.10
17° 0.30 0.60 0.90 1.20 1.49
Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Without spill light. Mounting accessories to be ordered separately. Available from 2nd quarter 2012 Accessories page 891
30°
60°
7500 cd
30°
30°
60°
7500 cd
30°
h(m) E(lx) D(m) 40° 1 5516 0.73 2 1379 1.46 3 613 2.18 4 345 2.91 5 221 3.64
19° 0.33 0.67 1.00 1.34 1.67
h(m) E(lx) D(m) 40° 1 4443 0.73 2 1111 1.46 3 494 2.18 4 278 2.91 5 178 3.64
19° 0.33 0.67 1.00 1.34 1.67
Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Without spill light. Mounting accessories to be ordered separately. Available from 2nd quarter 2012 Accessories page 891
30°
60°
11000 cd
60°
346 4666666 3
Weight 9.60kg LMF E rIP44
∅ 274 46666 3 ∅ 220 3666664
34468.000 Graphit m LED 54W 3480lm 3000K warm white Version 1 Spherolit lens, oval flood Maximum wind load area 0.09m2
30°
60°
346 4666666 3
Weight 9.60kg LMF E rIP44
∅ 274 46666 3 ∅ 220 3666664
34469.000 Graphit m LED 54W 4320lm 4000K neutral white Version 1 Spherolit lens, oval flood Maximum wind load area 0.09m2
30°
60°
60°
295 466666 3
Weight 6.40kg LMF E rIP44
∅ 205 366666 4 ∅ 160 36666 4
∅ 120 36664 666666
34458.000 Graphit m LED 40W 2610lm 3000K warm white Version 1 Spherolit lens, oval flood Maximum wind load area 0.06m2
2600 cd
60°
295 466666 3
∅ 205 366666 4 ∅ 160 36666 4
Weight 6.40kg LMF E rIP44
30°
60°
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 130° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Lens rotatable through 360°. 34459.000 Graphit m LED 40W 3240lm 4000K neutral white Version 1 Spherolit lens, oval flood Maximum wind load area 0.06m2
60°
211 4666 3
∅ 135 36664 666666 ∅ 96 666666 3664
193 466 3
211 4666 3
34478.000 Graphit m LED 13W 870lm 3000K warm white Version 1 Spherolit lens, oval flood Maximum wind load area 0.03m2
Weight 2.80kg LMF E rIP44
∅ 135 36664 666666 ∅ 96 666666 3664
34479.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1 Spherolit lens, oval flood Maximum wind load area 0.03m2
Screw-mounted cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Without spill light. Mounting accessories to be ordered separately. Available from 2nd quarter 2012 Accessories page 891
30°
30°
60°
11000 cd
30°
h(m) E(lx) D(m) 46° 1 7544 0.85 2 1886 1.70 3 838 2.55 4 472 3.40 5 302 4.24
19° 0.33 0.67 1.00 1.34 1.67
h(m) E(lx) D(m) 46° 1 6077 0.85 2 1519 1.70 3 675 2.55 4 380 3.40 5 243 4.24
19° 0.33 0.67 1.00 1.34 1.67
ERCO Program 2012
889
Beamer 34959.000
34957.000 34961.000 34962.000
34959.000
34963.000
34963.000
34950.000
∅ 120
∅ 89
∅ 89
∅ 89
34958.000 34960.000
34958.000
34950.000
34957.000
∅ 76
∅ 76
∅ 76
• •
74 .00 0
81 .00 0
82 .00 0
33 9
33 9
34 9
• •
• •
• •
• •
• •
ERCO Program 2012
34408.000 34409.000
• •
• •
• •
• •
• •
91 .00 0
34418.000 34419.000
34 97 4.0 00 33 97 4.0 00 33 98 1.0 00 33 98 2.0 00 34 99 1.0 00
• •
33 9
• •
890
• •
74 .00 0
34428.000 34429.000
34 9
34 97 4.0 00 33 97 9.0 00 33 98 2.0 00 34 99 0.0 00
Beamer Accessories
www.erco.com
00 7 .0
00 95
• •
• •
• •
• •
• •
• •
• •
• •
34468.000 34469.000
• •
• •
• •
• •
• •
7 .0 34
95
7.0
00
95
0 .0 34
95
0.0
00
95
1 .0 34
96
1.0
00
96
0 .0 34
96
0.0
00
96
9 .0 34
95
9.0
00
95
8 .0 34
95
8.0
00
95
3 .0 3.0 96 34
• •
• •
• •
• •
• •
• •
• •
• •
62 3666 4
75 36666 4
46666666663
600 466666666 3
∅ 115 36664 6666
260
160
34964.000 Cable junction box Plastic, black. Terminal block 2 of 5x2.5mm2 . 1 fuse D01 E14 10A. Weight 0.25kg
00
96
2 .0 34
96
2.0
00
96
2 .0 33
98
2.0
00
98
0 .0 98
0.0
00
98
5 .0 5.0 97
• •
4666663
65 3666 4
00
97
4 .0 97
4.0
00
97
5 .0 00 96
5.0
00
96
4 .0 96 4.0 96
65 3666 4
00
34 34
• •
00
34
• •
00 34
95
0 .0
00 1 .0
00 34
96 34
34
• •
00
34
34
• •
00
34
96
0 .0
00 9 .0
00 34
34
• •
00
34
95
8 .0
00
33
• •
33
95 34
33
34458.000 34459.000
00
34
• •
00
• •
33
96
3 .0
00 2 .0
00 34
• •
00
• •
33
96
2 .0
00
• •
34
98 33
• •
00
33
• •
00
• •
34
98
0 .0
00 5 .0
00
• •
34
97 33
• •
00
• •
34
97
4 .0
00 5 .0
34
• •
00
• •
34
96 34
• •
00
34
34478.000 34479.000
34
96
4 .0
00
Beamer Accessories
34965.000 Cable junction box Plastic, grey. Terminal block 2 of 5x6mm2 . 1 fuse D01 E14 10A. Weight 0.55kg
∅ 60 666 3664
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
33974.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 2.30kg
∅ 83
200 466666 3
200 466666 3
4666663
d 124 4 6663
d 124 4 6663
d 124 4 6663 200
502 6466666666 3
3664 6666
∅ 60
6663664
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
www.erco.com
33979.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.25kg
33980.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.30kg
33981.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.76kg
ERCO Program 2012
891
120 4666 3
34957.000 Side-mounted sleeve For mounting on adapter sleeve. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. 1 cable entry. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP65 only with mounted luminaire. Weight 0.90kg
892
ERCO Program 2012
34960.000 Adapter sleeve for poles ø 76mm. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Screw fixing. 3-pole terminal block for control line. Through-wiring possible. Luminaire rotatable through 360°. Protection mode IP44 only with mounted luminaire. Weight 2.55kg
3666 420 34990.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.16kg
34961.000 Adapter sleeve for posts ø 89mm. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Screw fixing. 3-pole terminal block for control line. Through-wiring possible. Luminaire rotatable through 360°. Protection mode IP44 only with mounted luminaire. Weight 1.95kg
34958.000 Adapter sleeve for poles ø 76mm and cantilever arms. Housing and cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powdercoated. Screw fixing. Terminal block 5x2,5mm2 . Throughwiring possible. 2 cable entries for cantilever arms. Protection mode IP44 only with accessories. Cantilever arms to be ordered separately. Poles ø 76mm to be ordered separately. Weight 3.80kg
407 466666 3
150 95 3∅666 4 3664
120 4∅666 3
4663
34950.000 Cantilever arm For mounting on adapter sleeve or wall. For standing luminaire installation. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Inspection cover: corrosion-resistant aluminium, double powder-coated in graphit m. 1 cable entry. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP44 in connection with mounted luminaire. Weight 3.55kg
4666663
161 466666 3
120 4∅666 3
120 466666 3
83
4663
34959.000 Adapter sleeve for posts ø 89mm and cantilever arms. Housing and cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powdercoated. Screw fixing. Terminal block 5x2,5mm2 . Throughwiring possible. 2 cable entries for cantilever arms. Protection mode IP44 only with accessories. Posts ø 89mm and cantilever arms to be ordered separately. Weight 3.20kg
34963.000 Post for adapter sleeves. Metal, hot-dip galvanised. Graphit m, double powder-coated. Mounting plate: metal. 5-pole terminal block for cable 5x2.5mm2 . Through-wiring possible. IP44 protection mode when used with relevant accessories. Not for concrete anchor 33980.000 and mounting plate 33982.000. Weight 1.50kg
120 176 3666 4 463
4663
160 46666 3
297 466666666 3
∅ 116
∅ 116 297 466666666 3
579 46666666666 3
34962.000 Post Metal, hot-dip galvanised. Graphit m, double powder-coated. Mounting plate: metal. 5-pole terminal block for cable 5x2.5mm2 . Through-wiring possible. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP44 in connection with mounted luminaire. Weight 5.60kg
160 46666 3
33982.000 Mounting plate Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 1.70kg
3666666 4∅ 89
153
24 66 3664
36666666 4∅ 120
693 64666666666666 3
d 260 46666666 3
Beamer Accessories
3666 420 34991.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.23kg
www.erco.com
Focalflood Floodlights The Focalflood range produces a wide light distribution along the one axis, with the focal point on the other. With a focused narrow beam at right angles to the lamp axis, the luminaires can be placed closer to objects than conventional wide beam floodlights. They are, therefore, particularly suitable for efficient lighting of façade surfaces as well as trees. At the same time, Focalflood also offers exceptionally high visual comfort with a cut- off angle of up to 50°; passers- by, traffic users and people inside the building all benefit from its all- round glare control. This is all possible thanks to the special design of the reflector contour and reflector surfaces.
Floodlights Axially symmetrical light distribution with flood characteristics produced by an oval beam for floodlighting.
Washlighting Wide- beam illumination of larger objects or spatial zones.
Tungsten halogen lamps 120W - 1000W 2300lm - 22000lm High- pressure discharge lamps 35W - 400W 3900lm - 35000lm Fluorescent lamps 10W - 54W 600lm - 4450lm Optional: DALI, varychrome
Spreitenbach Centre, Spreitenbach near Zürich. Architecture and lighting design: Matteo Thun.
www.erco.com
ERCO Program 2012
893
Focalflood Floodlights
The Focalflood floodlights are suitable for use in the outdoor environment, both for the efficient lighting of façade surfaces and also for vegetation. In indoor areas such as swimming pools, they provide protection against moisture and even dust in harsh environmental conditions. At the same time, Focalflood also offers high visual comfort with a cut- off angle of 50° on both major axes.
The floodlight versions of Focalflood produce a wide light distribution on the x- axis with the point of
An extensive range of mounting accessories is shared by Beamer, Focalflood and Parscoop. These accessories always enable the optimum mounting position, whether on the building itself or in the ground.
focal emphasis on the y- axis. With a focused narrow beam at right angles to the lamp axis, the luminaires
can be placed closer to objects than conventional wide beam floodlights.
In situations where little space is available between luminaire and façade, the Focalflood floodlight effi ciently illuminates the façade with grazing light. The
light distribution on the other axis provides economical lighting to produce the appearance of uniform brightness across the width of the façade.
A diffuser and a Softec lens guarantee the optimum mixture of the three primary colours at the front lens; this permits the controlled colour of light to appear absolutely uniformly on the illuminated surface. To facilitate lamp replace-
ment, the twopart front frame can be simply hinged open. The dusttight and jet- water proof housing with IP65 protection mode is made of aluminium and features a multiple powdercoated finish.
Additive colour mixing enables the light from the Focalflood varychrome luminaires to produce a multitude of colour nuances. The individually con trollable fluorescent lamps in the primary colours red, green and blue produce a smoothly changing, coloured light for illuminating wall surfaces or façades.
The DALI- compatible luminaires feature digitally addressable control gear with which every single luminaire can be individually controlled – i.e.
894
ERCO Program 2012
using the ERCO Light System DALI and the pre- programmed ERCO Light Studio software.
www.erco.com
Focalflood Floodlight with mounting plate for tungsten halogen lamps Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to
107 3666 4
200 4666 3
60°
130 3666 4
Weight 2.40kg LMF E I0qp krrIP65
268 46666 3
34100.000 Graphit m QT-DE12-RE 120W 230V R7s L75mm 2300lm Flood reflector Maximum wind load area 0.04m2
3666 4∅ 120 666666
QT-DE12-RE
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the 207 4666 3
245 46666 3
3666 4∅ 120 666666
QT-DE12-RE
278 466666 3
340 4666666 3
∅ 153 366664 66666
QT-DE12-RE
392 46666666 3
∅ 153 666666666 366664
www.erco.com
480 4666666666 3
30°
h(m) E(lx) D(m) 53° 1 1129 1.00 2 282 1.99 3 125 2.99 4 71 3.99 5 45 4.99
30°
60°
4000 cd
30°
h(m) E(lx) D(m) 31° 1 3677 0.55 2 919 1.11 3 409 1.66 4 230 2.22 5 147 2.77
70° 1.40 2.80 4.20 5.60 7.00
lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 904
30°
60°
7500 cd
30°
h(m) E(lx) D(m) 35° 1 6801 0.63 2 1700 1.26 3 756 1.89 4 425 2.52 5 272 3.15
71° 1.43 2.85 4.28 5.71 7.13
lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 905
60°
QT-DE12
88° 1.93 3.86 5.79 7.73 9.66
lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 904
h(m) 480 4 666666666 3
Weight 18.70kg LMF E I0qp krrIP65
524 4666666666 3
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the 34112.000 Graphit m QT-DE12 1000W 230V R7s L186mm 22000lm Flood reflector Maximum wind load area 0.24m2
1800 cd
60°
340 4666666 3
Weight 9.40kg LMF E I0qp krrIP65
416 466666666 3
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the 34108.000 Graphit m QT-DE12-RE 400W 230V R7s L114mm 9000lm Flood reflector Maximum wind load area 0.13m2
30°
60°
60°
245 46666 3
Weight 4.35kg LMF E I0qp krrIP65
312 466666 3
34102.000 Graphit m QT-DE12-RE 230W 230V R7s L114mm 5000lm Flood reflector Maximum wind load area 0.07m2
increase the visual comfort along the lamp axis, mirror-finish anodised. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 904
30°
60°
40000 cd
30°
1 2 3 4 5
E(lx) D(m) 21° 33403 0.37 8351 0.74 3711 1.11 2088 1.48 1336 1.85
ERCO Program 2012
61° 1.18 2.36 3.53 4.71 5.89
895
Focalflood Floodlight with mounting bracket for tungsten halogen lamps For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Heat-resistant cable with plug. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the lamp axis, mirror-finish anodised. 107 3666 4
200 4666 3
60°
130 3666 4
Weight 2.25kg LMF E I0qp rIP44
241 46666 3
34150.000 Graphit m QT-DE12-RE 120W 230V R7s L75mm 2300lm Flood reflector Maximum wind load area 0.04m2
3666 4∅ 120 666666
QT-DE12-RE
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Heat-resistant cable with plug. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the lamp axis, mirror-finish anodised. Cut207 4666 3
245 46666 3
36666666 4∅ 120
QT-DE12-RE
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Heat-resistant cable with plug. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the lamp axis, mirror-finish anodised. Cut278 466666 3
340 4666666 3
∅ 120 36664 66666
QT-DE12-RE
392 46666666 3
∅ 120 6666666666 36664
896
ERCO Program 2012
480 4666666666 3
30°
h(m) E(lx) D(m) 53° 1 1129 1.00 2 282 1.99 3 125 2.99 4 71 3.99 5 45 4.99
30°
60°
4000 cd
30°
h(m) E(lx) D(m) 31° 1 3677 0.55 2 919 1.11 3 409 1.66 4 230 2.22 5 147 2.77
70° 1.40 2.80 4.20 5.60 7.00
off angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 905
30°
60°
7500 cd
30°
h(m) E(lx) D(m) 35° 1 6801 0.63 2 1700 1.26 3 756 1.89 4 425 2.52 5 272 3.15
71° 1.43 2.85 4.28 5.71 7.13
off angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 906
60°
QT-DE12
88° 1.93 3.86 5.79 7.73 9.66
off angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 905
h(m) 480 4 666666666 3
Weight 18.20kg LMF E I0qp rIP44
483 4666666666 3
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Heat-resistant cable with plug. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the lamp axis, mirror-finish anodised. Cut34162.000 Graphit m QT-DE12 1000W 230V R7s L186mm 22000lm Flood reflector Maximum wind load area 0.24m2
1800 cd
60°
340 4666666 3
Weight 8.85kg LMF E I0qp rIP44
380 46666666 3
34158.000 Graphit m QT-DE12-RE 400W 230V R7s L114mm 9000lm Flood reflector Maximum wind load area 0.13m2
30°
60°
60°
245 46666 3
Weight 4.20kg LMF E I0qp rIP44
285 466666 3
34152.000 Graphit m QT-DE12-RE 230W 230V R7s L114mm 5000lm Flood reflector Maximum wind load area 0.07m2
Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 905
30°
60°
40000 cd
30°
1 2 3 4 5
E(lx) D(m) 21° 33403 0.37 8351 0.74 3711 1.11 2088 1.48 1336 1.85
61° 1.18 2.36 3.53 4.71 5.89
www.erco.com
Focalflood Floodlight with mounting plate for metal halide lamps Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to 207 4666 3
245 46666 3
60°
245 46666 3
Weight 4.85kg LMF E I0qp krrIP65
312 466666 3
34103.000 Graphit m ECG HIT-CE 35W G12 3900lm Flood reflector Maximum wind load area 0.07m2
36666666 6664∅ 120 207 4666 3
HIT-CE 245 46666 3
36666666 6664∅ 120
HIT-CE
340 4666666 3
HIT-DE-CE
34114.000 Graphit m HIT-DE 400W Fc2 35000lm Flood reflector HST-DE 400W possible. Maximum wind load area 0.24m2
Weight 23.90kg LMF E p krrIP65
392 46666666 3
∅ 153 366664 666666666
www.erco.com
30°
71° 1.43 2.85 4.28 5.71 7.13
h(m) E(lx) D(m) 22° 1 6371 0.39 2 1593 0.78 3 708 1.17 4 398 1.56 5 255 1.94
71° 1.43 2.85 4.28 5.71 7.13
increase the visual comfort along the lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 904
60°
30°
15000 cd
30°
1 2 3 4 5
60°
HIT-DE 480 4666666666 3
30°
60°
45000 cd
30°
1 2 3 4 5 h(m)
60°
HIT-DE
E(lx) D(m) 34° 11489 0.61 2872 1.22 1277 1.83 718 2.45 460 3.06
69° 1.37 2.75 4.12 5.50 6.87
double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 905
h(m) 480 4 666666666 3
480 4666666666 3
480 4 666666666 3
∅ 153 366664 666666666
524 4666666666 3
392 46666666 3
524 4666666666 3
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. 2 cable entries. Through-wiring possible. 3-pole terminal block. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, Weight 22.50kg LMF E 0qp krrIP65
7500 cd
h(m) E(lx) D(m) 22° 1 3206 0.39 2 802 0.78 3 356 1.17 4 200 1.56 5 128 1.94
h(m)
∅ 153 366664 6666666
34113.000 Graphit m HIT-DE 250W Fc2 20000lm Flood reflector Maximum wind load area 0.24m2
30°
30°
60°
60°
46666663
278 466666 3
4000 cd
340
Weight 10.00kg LMF E I0qp krrIP65
416 466666666 3
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to 34109.000 Graphit m ECG HIT-DE-CE 150W RX7s 14200lm Flood reflector Maximum wind load area 0.13m2
30°
60°
60°
245 46666 3
Weight 4.85kg LMF E I0qp krrIP65
312 466666 3
34105.000 Graphit m ECG HIT-CE 70W G12 7750lm Flood reflector Maximum wind load area 0.07m2
increase the visual comfort along the lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 904
30°
60°
60000 cd
30°
1 2 3 4 5
E(lx) D(m) 19° 29526 0.33 7381 0.67 3281 1.00 1845 1.34 1181 1.67
66° 1.30 2.60 3.90 5.20 6.49
E(lx) D(m) 19° 51670 0.33 12917 0.67 5741 1.00 3229 1.34 2067 1.67
66° 1.30 2.60 3.90 5.20 6.49
ERCO Program 2012
897
Focalflood Floodlight with mounting bracket for metal halide lamps For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the 207 4666 3
245 46666 3
60°
245 46666 3
Weight 4.70kg LMF E I0qp rIP44
285 466666 3
34153.000 Graphit m ECG HIT-CE 35W G12 3900lm Flood reflector Maximum wind load area 0.07m2
36666666 4∅ 120 207 4666 3
HIT-CE 245 46666 3
36666666 4∅ 120
HIT-CE
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the 278 466666 3
340 4666666 3
HIT-DE-CE
34164.000 Graphit m HIT-DE 400W Fc2 35000lm Flood reflector HST-DE 400W possible. Maximum wind load area 0.24m2
Weight 23.05kg LMF E 0 q p rIP44
392 46666666 3
∅ 120 6666666666 36664
898
ERCO Program 2012
60°
7500 cd
30°
71° 1.43 2.85 4.28 5.71 7.13
h(m) E(lx) D(m) 22° 1 6371 0.39 2 1593 0.78 3 708 1.17 4 398 1.56 5 255 1.94
71° 1.43 2.85 4.28 5.71 7.13
lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 905
15000 cd
30°
1 2 3 4 5
30°
60°
45000 cd
30°
1 2 3 4 5 h(m)
60°
HIT-DE
E(lx) D(m) 34° 11489 0.61 2872 1.22 1277 1.83 718 2.45 460 3.06
69° 1.37 2.75 4.12 5.50 6.87
Mounting accessories to be ordered separately. Accessories page 906
60°
HIT-DE 480 4666666666 3
30°
60°
h(m) 480 4 666666666 3
480 4666666666 3
480 466666666 3
∅ 120 6666666666 36664
483 4666666666 3
392 46666666 3
483 4666666666 3
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. Heat-resistant cable with plug. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Weight 21.95kg LMF E 0 q p rIP44
30°
30°
h(m) E(lx) D(m) 22° 1 3206 0.39 2 802 0.78 3 356 1.17 4 200 1.56 5 128 1.94
h(m)
∅ 120 36664 66666
34163.000 Graphit m HIT-DE 250W Fc2 20000lm Flood reflector Maximum wind load area 0.24m2
4000 cd
60°
340 4666666 3
Weight 9.45kg LMF E I0qp rIP44
380 46666666 3
34159.000 Graphit m ECG HIT-DE-CE 150W RX7s 14200lm Flood reflector Maximum wind load area 0.13m2
30°
60°
60°
245 46666 3
Weight 4.70kg LMF E I0qp rIP44
285 466666 3
34155.000 Graphit m ECG HIT-CE 70W G12 7750lm Flood reflector Maximum wind load area 0.07m2
lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 905
30°
60°
60000 cd
30°
1 2 3 4 5
E(lx) D(m) 19° 29526 0.33 7381 0.67 3281 1.00 1845 1.34 1181 1.67
66° 1.30 2.60 3.90 5.20 6.49
E(lx) D(m) 19° 51670 0.33 12917 0.67 5741 1.00 3229 1.34 2067 1.67
66° 1.30 2.60 3.90 5.20 6.49
www.erco.com
Focalflood Floodlight with mounting plate for compact fluorescent lamps Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to 107 3666 4
200 4666 3
60°
130 3666 4
Weight 2.50kg LMF E I0qp krrIP65
268 46666 3
34101.000 Graphit m ECG TC-DEL 10W G24q-1 600lm Flood reflector Maximum wind load area 0.04m2
36666666 4∅ 120
TC-DEL
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to 207 4666 3
245 46666 3
36666666 4∅ 120
TC-TEL
∅ 153 366664 66666
www.erco.com
340 4666666 3
30°
TC-TEL
h(m) E(lx) D(m) 74° 1 130 1.51 2 33 3.01 3 14 4.52 4 8 6.03 5 5 7.54
107° 2.70 5.41 8.11 10.81 13.51
increase the visual comfort along the lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 904
30°
60°
1000 cd
30°
h(m) E(lx) D(m) 73° 1 711 1.48 2 178 2.96 3 79 4.44 4 44 5.92 5 28 7.40
75° 1.53 3.07 4.60 6.14 7.67
increase the visual comfort along the lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 904
60°
46666663
278 466666 3
180 cd
60°
340
Weight 9.60kg LMF E I0qp krrIP65
416 466666666 3
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to 34111.000 Graphit m ECG TC-TEL 42W GX24q-4 3200lm Flood reflector Maximum wind load area 0.13m2
30°
60°
60°
245 46666 3
Weight 4.60kg LMF E I0qp krrIP65
312 466666 3
34107.000 Graphit m ECG TC-TEL 26W GX24q-3 1800lm Flood reflector Maximum wind load area 0.07m2
increase the visual comfort along the lamp axis, mirror-finish anodised. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 904
30°
2000 cd
30°
h(m) E(lx) D(m) 64° 1 1534 1.25 2 384 2.50 3 170 3.75 4 96 5.00 5 61 6.25
ERCO Program 2012
78° 1.62 3.24 4.86 6.48 8.10
899
Focalflood Floodlight with mounting bracket for compact fluorescent lamps For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to
107 3666 4
200 4666 3
60°
130 3666 4
Weight 2.35kg LMF E I0qp rIP44
241 46666 3
34151.000 Graphit m ECG TC-DEL 10W G24q-1 600lm Flood reflector Maximum wind load area 0.04m2
∅ 120 3666 646666
TC-DEL
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the 207 4666 3
245 46666 3
36666666 4∅ 120
TC-TEL
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 0°-90° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the 278 466666 3
∅ 120 36664 66666
900
ERCO Program 2012
340 4666666 3
180 cd
TC-TEL
30°
h(m) E(lx) D(m) 74° 1 130 1.51 2 33 3.01 3 14 4.52 4 8 6.03 5 5 7.54
107° 2.70 5.41 8.11 10.81 13.51
lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 905
30°
60°
1000 cd
30°
h(m) E(lx) D(m) 73° 1 711 1.48 2 178 2.96 3 79 4.44 4 44 5.92 5 28 7.40
75° 1.53 3.07 4.60 6.14 7.67
lamp axis, mirror-finish anodised. Cutoff angle 50° along the main axes. Without spill light. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 905
60°
340 4666666 3
Weight 9.05kg LMF E I0qp rIP44
380 46666666 3
34161.000 Graphit m ECG TC-TEL 42W GX24q-4 3200lm Flood reflector Maximum wind load area 0.13m2
30°
60°
60°
245 46666 3
Weight 4.45kg LMF E I0qp rIP44
285 466666 3
34157.000 Graphit m ECG TC-TEL 26W GX24q-3 1800lm Flood reflector Maximum wind load area 0.07m2
increase the visual comfort along the lamp axis, mirror-finish anodised. Screw-fastened cover with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 905
30°
60°
2000 cd
30°
h(m) E(lx) D(m) 64° 1 1534 1.25 2 384 2.50 3 170 3.75 4 96 5.00 5 61 6.25
78° 1.62 3.24 4.86 6.48 8.10
www.erco.com
Focalflood Floodlight with mounting plate for fluorescent lamps Housing: corrosion-resistant aluminium profile, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinges, graduated disc and mounting plate: corrosion-resistant aluminium. Hinge with internal wiring, 130° tilt. Electronic control gear, plug and play connectivity with DALI version. 2 cable entries. Through-wiring possible. Flood reflector with focal emphasis in beam direction: aluminium, silver, bright anodised. Side reflectors to increase the visual comfort along the lamp axis, mirror-finish anodised. Cutoff angle 50° (C0). Without spill light. Screw-fastened cover with safety glass: corrosion-resistant aluminium profile, double powder-coated. Hinge open for lamp replacement. Reduction of luminous flux below 0°C.
DALI PLUG+ PLAY
143 4666 3
1242 466666666666666666666 3
60°
206 4666666 3
Weight 10.10kg LMF E 5 krrIP65
145 4666 3
34119.000 Graphit m ECG DALI T16 28W G5 2600lm T16 54W G5 4450lm Flood reflector 5-pole terminal block. Maximum wind load area 0.2m2
81 46 3
325 46666666666 3
Protection mode IP65: dust-proof and water jet-proof. Accessories page 904
T16
30°
60°
1800 cd
60°
T16 143 4666 3
81 46 3 143 4666 3
325 46666666666 3
81 46 3
T16
1242 466666666666666666666 3
325 46666666666 3
60°
3000 cd
60°
30°
T16
30°
30°
60°
1800 cd
60°
206 4666666 3
Weight 10.10kg LMF E 5p krrIP65
145 4666 3
34116.000 Graphit m ECG T16 54W G5 4450lm Flood reflector 3-pole terminal block. Maximum wind load area 0.2m2
1242 466666666666666666666 3
206 4666666 3
Weight 10.10kg LMF E 5p krrIP65
145 4666 3
34115.000 Graphit m ECG T16 28W G5 2600lm Flood reflector 3-pole terminal block. Maximum wind load area 0.2m2
30°
30°
30°
60°
3000 cd
30°
h(m) E(lx) D(m) 44° 1 1444 0.81 2 361 1.62 3 160 2.42 4 90 3.23 5 58 4.04
103° 2.51 5.03 7.54 10.06 12.57
h(m) E(lx) D(m) 44° 1 2472 0.81 2 618 1.62 3 275 2.42 4 154 3.23 5 99 4.04
103° 2.51 5.03 7.54 10.06 12.57
h(m) E(lx) D(m) 44° 1 1444 0.81 2 361 1.62 3 160 2.42 4 90 3.23 5 58 4.04
103° 2.51 5.03 7.54 10.06 12.57
h(m) E(lx) D(m) 44° 1 2472 0.81 2 618 1.62 3 275 2.42 4 154 3.23 5 99 4.04
103° 2.51 5.03 7.54 10.06 12.57
Castillo de Manzanares el Real. Architect: Gines Sanchez Hevia, Madrid.
www.erco.com
ERCO Program 2012
901
Focalflood Floodlight RGB varychrome for fluorescent lamps Housing: corrosion-resistant aluminium profile, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinges, graduated disc and mounting plate: corrosion-resistant aluminium. Hinge with internal wiring, 130° tilt. Three electronic control gear units for ERCO RGB varychrome colour mixing. DALI version offers plug and play connectivity. Two cable entries. Throughwiring possible. Reflector: aluminium, silver anodised,
DALI PLUG+ PLAY
143 4666 3
1242 466666666666666666666 3
60°
206 4666666 3
Weight 11.00kg LMF E 5p krrIP65
145 4666 3
34117.000 Graphit m ECG DALI T16 28W G5 700lm blue T16 28W G5 2100lm red T16 28W G5 3500lm green 5-pole terminal block. Maximum wind load area 0.2m2
81 46 3
325 46666666666 3
mirror-finish. Diffuser and Softec lens for uniform colour mixing. Screw-fastened cover with safety glass: corrosion-resistant aluminium profile, double powder-coated. Hinge open for lamp replacement. Reduction of luminous flux below 0°C. Protection mode IP65: dust-proof and water jet-proof. Accessories page 904
T16
30°
60°
400 cd
60°
T16
30°
60°
750 cd
60°
T16 143 4666 3
1242 466666666666666666666 3
81 46 3
325 46666666666 3
T16
30°
1000 cd
30°
400 cd
30°
30°
60°
750 cd
60°
T16
30°
60°
60°
T16
30°
60°
60°
206 4666666 3
Weight 11.00kg LMF E 5p krrIP65
145 4666 3
34118.000 Graphit m ECG 1-10V T16 28W G5 700lm blue T16 28W G5 2100lm red T16 28W G5 3500lm green 7-pole terminal block for mains and control line. Maximum wind load area 0.2m2
30°
30°
30°
60°
1000 cd
30°
h(m) E(lx) D(m) 86° 1 190 1.87 2 48 3.73 3 21 5.60 4 12 7.46 5 8 9.33
87° 1.90 3.80 5.69 7.59 9.49
h(m) E(lx) D(m) 86° 1 570 1.87 2 143 3.73 3 63 5.60 4 36 7.46 5 23 9.33
87° 1.90 3.80 5.69 7.59 9.49
h(m) E(lx) D(m) 86° 1 950 1.87 2 238 3.73 3 106 5.60 4 59 7.46 5 38 9.33
87° 1.90 3.80 5.69 7.59 9.49
h(m) E(lx) D(m) 86° 1 190 1.87 2 48 3.73 3 21 5.60 4 12 7.46 5 8 9.33
87° 1.90 3.80 5.69 7.59 9.49
h(m) E(lx) D(m) 86° 1 570 1.87 2 143 3.73 3 63 5.60 4 36 7.46 5 23 9.33
87° 1.90 3.80 5.69 7.59 9.49
h(m) E(lx) D(m) 86° 1 950 1.87 2 238 3.73 3 106 5.60 4 59 7.46 5 38 9.33
87° 1.90 3.80 5.69 7.59 9.49
Olympic Swimming Pool, Munich. Architect (existing building): Behnisch & Partner, Stuttgart. Roof construction: Frei Otto. Site management (renovation): Carsten Kiese, Olympiapark München GmbH. Electrical design: Ingenieurbüro Riemhofer, Munich.
902
ERCO Program 2012
www.erco.com
Focalflood 34959.000
34957.000 34961.000 34962.000
34959.000
34963.000
34963.000
34950.000
∅ 120
∅ 89
∅ 89
∅ 89
34958.000 34960.000
34958.000
34950.000
34957.000
∅ 76
∅ 76
∅ 76
Church, Rørvik. Lighting design: Stokkan Lys AS, Trondheim.
www.erco.com
ERCO Program 2012
903
904
ERCO Program 2012 33 33 34
• • • • • • • • • • • • • • • • •
.00 0 .00 0
33 98 1 .00 0
33 97 4 .00 0
34 97 4 .00 0
83 82 9 .00 0
34 93 3
33 98 2
34 99 1
• • •
• • •
• • •
• • •
• • •
• • •
•
• • •
• • •
• • •
• • •
• • •
00
0.0
99
00
2.0
98
00
9.0
97
00
4.0
97
00
9.0
82
00
3.0
92
00
2.0
92
00
1.0
92
00
0.0
92
00
4.0
92
5.0
33
• • • •
34
34
33
83 34
• • • • • • • •
.00 0
34
• • • •
.00 0
83
83
• • • •
.00 0
34
34
• • • •
34 93 2
34
34
• • • •
34 93 1
34
34
• • • •
92
• • • •
.00 0
34
• • • 34
34108.000 34109.000 34111.000 • • • •
.00 0
34102.000 34103.000 34105.000 34107.000
34 93 0
34
•
34
• •
34 93 4
• •
00
• •
.00 0
34
• •
34
• •
34 93 5
00
• •
.00 0
34
1.0
90
• •
34
34100.000 34101.000 34115.000 34116.000 34117.000 34118.000 34119.000
34 90 2
• • • • •
99
99
98
97
97
81
82
91
91
91
91
91
91
90
0 .0
5 .0
2 .0
9 .0
4 .0
4 .0
9 .0
3 .0
2 .0
1 .0
0 .0
4 .0
5 .0
0 .0
00
00
00
00
00
00
00
00
00
00
00
00
00
00
Focalflood Accessories
• •
www.erco.com
34 34 34 34 34 34 83 34 33 33 33 34
• • • • • • • • • • • • • • • • • • • • • •
34150.000 34151.000 • • • •
34152.000 34153.000 34155.000 34157.000 • • • • • • • •
34158.000 34159.000 34161.000
• • •
www.erco.com
• • • • •
• • • •
• • • 91 00 34 4.0 91 00 34 0.0 91 00 34 1.0 91 00 34 2.0 91 00 3.0 83 00 82 9.0 34 00 96 34 4.0 96 00 5.0 34 00 97 4.0 00 33 97 5.0 00 33 98 0.0 00 33 98 2.0 34 00 96 34 2.0 96 00 3.0 34 00 95 8.0 00 34 95 9.0 00 34 96 0.0 00 34 96 1.0 00 34 95 0.0 00 34 95 7.0 00
34
5.0
• • •
91
• • •
92 34 5.0 92 00 34 4.0 92 00 34 0.0 92 00 34 1.0 92 00 34 2.0 92 00 3.0 83 00 82 9.0 34 00 96 34 4.0 96 00 5.0 34 00 97 4.0 00 33 97 5.0 00 33 98 0.0 00 33 98 2.0 34 00 96 34 2.0 96 00 3.0 34 00 95 8.0 00 34 95 9.0 00 34 96 0.0 00 34 96 1.0 00 34 95 0.0 00 34 95 7.0 00
• • •
34
00
• • •
34
00
34
0.0
90
• • •
34
90 1.0
34112.000 34113.000 34114.000
34
02 .0 34 00 93 34 5.0 93 00 34 4.0 93 00 34 0.0 93 00 34 1.0 93 00 34 2.0 93 00 3.0 83 00 82 9.0 34 00 96 34 4.0 96 00 5.0 34 00 97 4.0 00 33 97 5.0 00 33 98 0.0 00 33 98 2.0 34 00 96 34 2.0 96 00 3.0 34 00 95 8.0 00 34 95 9.0 00 34 96 0.0 00 34 96 1.0 00 34 95 0.0 00 34 95 7.0 00
34 9
• •
• • • •
• • • • •
• • • •
• • • • •
• • • •
• • • • •
• • • •
• • • •
•
• • •
• • • •
• • • • •
• • • •
• • • • •
• • • •
• • • • •
• • • •
• • • • •
• • • •
• • • • •
• • • •
• • • • •
• • • •
• • •
• •
• • • •
• • •
• •
• • • •
• • •
99
98
98
97
97
82
94
94
94
94
94
94
90
1 .0
2 .0
1 .0
4 .0
4 .0
9 .0
3 .0
2 .0
1 .0
0 .0
4 .0
5 .0
3 .0
• •
• • • •
• • •
00
00
00
00
00
00
00
00
00
00
00
00
00
Focalflood Accessories
• •
• • • •
• • •
• •
• • • •
• • •
• •
• • • •
• • •
• •
• • • •
• • •
ERCO Program 2012
905
00 3 4 5 .0 94 00 3 4 4 .0 94 00 3 4 0 .0 94 00 3 4 1 .0 94 00 3 4 2 .0 94 00 3 .0 83 00 82 9 .0 34 00 96 3 4 4 .0 96 00 5 .0 34 00 97 4 .0 00 33 97 5 .0 00 33 98 0 .0 00 33 98 2 .0 34 00 96 3 4 2 .0 96 00 3 .0 34 00 95 8 .0 00 34 95 9 .0 00 34 96 0 .0 00 34 96 1 .0 00 34 95 0 .0 00 34 95 7 .0 00
• • •
• • •
34162.000 34163.000 34164.000
94
• • •
• • •
• • •
34925.000 34935.000 34945.000 Skintone filter
• • •
• • •
•
• • •
34914.000 Daylight conversion filter
• • •
• • •
• • •
• • •
34924.000 34934.000 34944.000 Daylight conversion filter
• • •
• • •
34910.000 Colour filter Magenta
• • •
• • •
• • •
• • •
• • •
• • •
34911.000 Colour filter Amber
34920.000 34930.000 34940.000 Colour filter Magenta
• • •
34921.000 34931.000 34941.000 Colour filter Amber
90 4666666 3 45 466 3
34915.000 Skintone filter
34
90
3 .0 34
Focalflood Accessories
58 70 3 46666 3 4666
83814.000 DALI DALI analogue converter 230V 10%, 5A for connection of luminaires with ECG 1-10V to Light System DALI. Conversion of a DALI signal into a 1-10V signal. Internal relay for inductive loads of max. 5A. Mounting on DIN rail. Weight 0.22kg
906
ERCO Program 2012
34900.000 Fixing frame for filters. Metal, graphit m, powder-coated.
34923.000 34933.000 34943.000 Colour filter Night blue
65 3666 4
65 3666 4
34901.000 34902.000 34903.000 Fixing frame for filters. Metal, graphit m, powder-coated.
62 3666 4
34964.000 Cable junction box Plastic, black. Terminal block 2 of 5x2.5mm2 . 1 fuse D01 E14 10A. Weight 0.25kg
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
75 36666 4
34965.000 Cable junction box Plastic, grey. Terminal block 2 of 5x6mm2 . 1 fuse D01 E14 10A. Weight 0.55kg
260 4666666666 3
50 72 4666 3 46666 3
34913.000 Colour filter Night blue
160 466666 3
34922.000 34932.000 34942.000 Colour filter Sky blue
90 4666666 3 45 466 3
34912.000 Colour filter Sky blue
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
www.erco.com
∅ 83
502 6466666666 3
3664 6666
6663664 33979.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.25kg
33982.000 Mounting plate Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 1.70kg
4663
34958.000 Adapter sleeve for poles ø 76mm and cantilever arms. Housing and cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powdercoated. Screw fixing. Terminal block 5x2,5mm2 . Throughwiring possible. 2 cable entries for cantilever arms. Protection mode IP44 only with accessories. Cantilever arms to be ordered separately. Poles ø 76mm to be ordered separately. Weight 3.80kg
∅ 116 297 466666666 3
297 466666666 3
∅ 116
4663
34959.000 Adapter sleeve for posts ø 89mm and cantilever arms. Housing and cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powdercoated. Screw fixing. Terminal block 5x2,5mm2 . Throughwiring possible. 2 cable entries for cantilever arms. Protection mode IP44 only with accessories. Posts ø 89mm and cantilever arms to be ordered separately. Weight 3.20kg
3666666 4∅ 89
579 46666666666 3
34962.000 Post Metal, hot-dip galvanised. Graphit m, double powder-coated. Mounting plate: metal. 5-pole terminal block for cable 5x2.5mm2 . Through-wiring possible. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP44 in connection with mounted luminaire. Weight 5.60kg
34963.000 Post for adapter sleeves. Metal, hot-dip galvanised. Graphit m, double powder-coated. Mounting plate: metal. 5-pole terminal block for cable 5x2.5mm2 . Through-wiring possible. IP44 protection mode when used with relevant accessories. Not for concrete anchor 33980.000 and mounting plate 33982.000. Weight 1.50kg
120 4∅666 3 160 46666 3
33981.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.76kg
33980.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.30kg
34960.000 Adapter sleeve for poles ø 76mm. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Screw fixing. 3-pole terminal block for control line. Through-wiring possible. Luminaire rotatable through 360°. Protection mode IP44 only with mounted luminaire. Weight 2.55kg
120 4∅666 3 160 46666 3
d 260 46666666 3
200 466666 3
24 66 3664
36666666 4∅ 120
693 64666666666666 3
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
d 124 4 6663
www.erco.com
200 466666 3
∅ 60
∅ 60 666 3664
33974.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 2.30kg
d 124 4 6663
d 124 4 6663 200 466666 3
∅ 115 36664 6666 600 466666666 3
Focalflood Accessories
34961.000 Adapter sleeve for posts ø 89mm. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Screw fixing. 3-pole terminal block for control line. Through-wiring possible. Luminaire rotatable through 360°. Protection mode IP44 only with mounted luminaire. Weight 1.95kg
ERCO Program 2012
907
120 4666 3
34957.000 Side-mounted sleeve For mounting on adapter sleeve. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. 1 cable entry. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP65 only with mounted luminaire. Weight 0.90kg
120 466666 3
83 466 3 161 466666 3
3666 420
62 466 3
34995.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.25kg
34990.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.16kg
153 466666 3
34950.000 Cantilever arm For mounting on adapter sleeve or wall. For standing luminaire installation. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Inspection cover: corrosion-resistant aluminium, double powder-coated in graphit m. 1 cable entry. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP44 in connection with mounted luminaire. Weight 3.55kg
81 46666 3 3666 425
407 466666 3
150 95 3∅666 4 3664
120 176 3666 4 463
Focalflood Accessories
3666 420 34991.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.23kg
Oslo City Garage underground car park, Oslo. Architect: a-lab, Oslo. Lighting design: Rasmussen & Strand AS, Oslo.
908
ERCO Program 2012
www.erco.com
Parscoop Washlights, wallwashers The Parscoop range is primarily intended for outdoor architectural lighting, but is also suitable for indoor areas. Mounted on the wall, Parscoop floodlights can illuminate ceilings, porches or floors. When ceiling or floormounted, they can illuminate walls and façades. A wide range of mounting accessories enable these washlights to be optimally positioned under all conditions. The beam direction can be precisely adjusted by setting the robust hinge to the required angle. Parscoop luminaires have asymmetric reflectors: they emit maximum light distribution at angles of below 25° thereby producing optimised uniform illumination. All Parscoop luminaires have robust housings made of cast aluminium.
Wallwashing Vertical illuminance for brightening the surroundings and dividing the outside.
Wallwashers Asymmetrical light distribution for highly uniform façade illumination.
Tungsten halogen lamps 120W 2300lm
Washlighting Wide- beam illumination of larger objects or spatial zones.
Washlights Axially symmetrical light distribution produced by an oval beam for floodlighting.
Tungsten halogen lamps 230W - 1000W 5000lm - 22000lm High- pressure discharge lamps 35W - 400W 3300lm - 35000lm Fluorescent lamps 42W 3200lm
www.erco.com
ERCO Program 2012
909
Parscoop Washlights, wallwashers
60°
80°
1
1
The Parscoop hinge with internal wiring can be tilted for maximum flexibility during installation and alignment in order to create exceptional lighting effects on the building.
Luminaires with mounting plate can be mounted directly on the floor, wall or ceiling. Parscoop wallwashers and washlights with mounting bracket can be mounted on upright supporting poles, brackets or cantilevers. Parscoop washlights can be mounted on walls, ceilings or floors and in addition can also be tilted.
The wallwashers for tungsten halogen lamps are most effective when set at 45°.
Washlights for tungsten halogen lamps and high- pressure discharge lamps
are most effective when set at 25° with approx. 500cd/klm.
The washlights for compact fluorescent lamps are most effective
when set at 40° with approx. 300cd/klm.
The reflector geometry produces an asymmetrical light distribution for uniform illumination of surfaces.
910
ERCO Program 2012
www.erco.com
Parscoop Wallwasher with mounting plate for tungsten halogen lamps Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety glass: corrosion-resistant cast alu-
200 46666 3
36610 6647
253 466666 3
∅120 36666 4 268 466666 3
Weight 2.40kg LMF E I0qp krrIP65
130 36666 4
33240.000 Graphit m 33201.000 White (RAL9002) 33200.000 Silver m QT-DE12-RE 120W 230V R7s L75mm 2300lm Maximum wind load area 0.04m2
minium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 913
60°
30°
QT-DE12-RE
60°
2000 cd
Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 1.00 1.00 1.00 1.00 Luminaire spacing (m) 1.00 1.25 1.50 1.80 399 321 268 223 Illuminance En (lx)
30°
Parscoop Wallwasher with mounting bracket for tungsten halogen lamps For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Heat-resistant cable with plug. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety glass: corrosion-resistant cast alu-
Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 1.00 1.00 1.00 1.00 Luminaire spacing (m) 1.00 1.25 1.50 1.80 399 321 268 223 Illuminance En (lx)
10 7
∅120 36666 4
229 46666 3
241 466666 3
130 36666 4
200 46666 3
664
Weight 2.30kg LMF E I0qp rIP44
366
33270.000 Graphit m QT-DE12-RE 120W 230V R7s L75mm 2300lm Maximum wind load area 0.04m2
minium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 913
QT-DE12-RE
Carrasco International Airport, Montevideo. Architect: Rafael Viñoly, New York; Carla Bechelli Arquitectos, Buenos Aires. Lighting design: Ricardo Hofstadter, Montevideo. Construction management: Puerta del Sur S.A. / Corporación América, Arq. Julian M. Evans.
www.erco.com
ERCO Program 2012
911
Parscoop 34959.000
34957.000 34961.000 34962.000
34959.000
34963.000
34963.000
34950.000
∅ 120
∅ 89
∅ 89
∅ 89
34958.000 34960.000
34958.000
34950.000
34957.000
∅ 76
∅ 76
∅ 76
Museum voor Natuurwetenschappen, Brussels. Architect and lighting designer: SumProject, Brussels. Gallery of Evolution - Scenography: Atelier de l’île, Paris. Exhibition lighting: Cosil, Paris.
912
ERCO Program 2012
www.erco.com
00 0 .0
00 34
99
33
98
2 .0
00 9 .0
00 33
97
4 .0
00 97 34
82
9 .0
00 3 .0
00 91
2 .0
00 91 34
91
1 .0
00 0 .0
00 91
91
34
34
•
•
•
•
•
34
90 4666666 3 45 466 3
34914.000 Daylight conversion filter
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
•
•
•
34910.000 Colour filter Magenta
•
•
•
•
•
34911.000 Colour filter Amber
65 3666 4
•
34912.000 Colour filter Sky blue
65 3666 4
•
•
•
•
34964.000 Cable junction box Plastic, black. Terminal block 2 of 5x2.5mm2 . 1 fuse D01 E14 10A. Weight 0.25kg
•
34913.000 Colour filter Night blue
62 3666 4
•
•
•
34900.000 Fixing frame for filters. Metal, graphit m, powder-coated.
75 36666 4
34965.000 Cable junction box Plastic, grey. Terminal block 2 of 5x6mm2 . 1 fuse D01 E14 10A. Weight 0.55kg
260 4666666666 3
•
4666663
•
160
•
58 70 3 46666 3 4666
www.erco.com
•
• • •
91 00 34 4.0 91 00 34 0.0 91 00 34 1.0 91 00 34 2.0 91 00 3.0 83 00 82 9.0 34 00 96 34 4.0 96 00 5.0 34 00 97 4.0 00 33 97 5.0 00 33 98 0.0 00 33 98 2.0 34 00 96 34 2.0 96 00 3.0 34 00 95 8.0 00 34 95 9.0 00 34 96 0.0 00 34 96 1.0 00 34 95 0.0 00 34 95 7.0 00
•
• • •
5.0 91
90
0.0
00
•
83
•
•
34
•
34915.000 Skintone filter
4 .0
00 5 .0
33270.000
34
91
•
34
34
33200.000 33201.000 33240.000
34
34
90
0 .0
00
Parscoop Accessories
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
ERCO Program 2012
913
Parscoop Accessories ∅ 83
200 466666 3
d 260 46666666 3
d 124 4 6663
d 124 4 6663 200 466666 3
502 6466666666 3
3664 6666
24 66 3664
∅ 60
6663664
34962.000 Post Metal, hot-dip galvanised. Graphit m, double powder-coated. Mounting plate: metal. 5-pole terminal block for cable 5x2.5mm2 . Through-wiring possible. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP44 in connection with mounted luminaire. Weight 5.60kg
3666666 4∅ 89
34963.000 Post for adapter sleeves. Metal, hot-dip galvanised. Graphit m, double powder-coated. Mounting plate: metal. 5-pole terminal block for cable 5x2.5mm2 . Through-wiring possible. IP44 protection mode when used with relevant accessories. Not for concrete anchor 33980.000 and mounting plate 33982.000. Weight 1.50kg
33982.000 Mounting plate Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 1.70kg
∅ 116 297 466666666 3
579 46666666666 3
693 64666666666666 3
36666666 4∅ 120
33980.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.30kg
∅ 116
4663
34958.000 Adapter sleeve for poles ø 76mm and cantilever arms. Housing and cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powdercoated. Screw fixing. Terminal block 5x2,5mm2 . Throughwiring possible. 2 cable entries for cantilever arms. Protection mode IP44 only with accessories. Cantilever arms to be ordered separately. Poles ø 76mm to be ordered separately. Weight 3.80kg
297 466666666 3
33979.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.25kg
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
4663
34959.000 Adapter sleeve for posts ø 89mm and cantilever arms. Housing and cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powdercoated. Screw fixing. Terminal block 5x2,5mm2 . Throughwiring possible. 2 cable entries for cantilever arms. Protection mode IP44 only with accessories. Posts ø 89mm and cantilever arms to be ordered separately. Weight 3.20kg
The New York Times Building, New York. Architect: Renzo Piano Building Workshop, Genoa/Paris, FXFowle Architects, New York. Lighting design: OVI Office for Visual Interaction, New York.
914
ERCO Program 2012
www.erco.com
34961.000 Adapter sleeve for posts ø 89mm. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Screw fixing. 3-pole terminal block for control line. Through-wiring possible. Luminaire rotatable through 360°. Protection mode IP44 only with mounted luminaire. Weight 1.95kg
34950.000 Cantilever arm For mounting on adapter sleeve or wall. For standing luminaire installation. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Inspection cover: corrosion-resistant aluminium, double powder-coated in graphit m. 1 cable entry. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP44 in connection with mounted luminaire. Weight 3.55kg
161 466666 3
120 4666 3
34957.000 Side-mounted sleeve For mounting on adapter sleeve. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. 1 cable entry. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP65 only with mounted luminaire. Weight 0.90kg
120
4666663
34960.000 Adapter sleeve for poles ø 76mm. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Screw fixing. 3-pole terminal block for control line. Through-wiring possible. Luminaire rotatable through 360°. Protection mode IP44 only with mounted luminaire. Weight 2.55kg
407 466666 3
83 466 3
160 46666 3
120 176 3666 4 463
120 4∅666 3
160 46666 3
120 4∅666 3
150 95 3∅666 4 3664
Parscoop Accessories
3666 420 34990.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.16kg
Parscoop Washlight with mounting plate for tungsten halogen lamps
Weight 3.70kg LMF E I0qp krrIP65
245 466666 3
388 466666666 3
245 466666 3
135°
105°
minium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 923
130 36666 4
33241.000 Graphit m 33211.000 White (RAL9002) 33210.000 Silver m QT-DE12-RE 230W 230V R7s L114mm 5000lm Maximum wind load area 0.07m2
366666666 4∅120
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety glass: corrosion-resistant cast alu-
2500 cd
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.50 1.50 2.00 2.00 Luminaire spacing (m) 1.50 2.50 2.00 3.00 387 234 250 167 Illuminance En (lx)
QT-DE12-RE
www.erco.com
ERCO Program 2012
915
Parscoop Washlight with mounting plate for tungsten halogen lamps
Weight 8.30kg LMF E I0qp krrIP65
340 4666666 3
544 46666666666 3
340 4666666 3
minium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 923
155 36666 4
33243.000 Graphit m 33215.000 White (RAL9002) 33214.000 Silver m QT-DE12-RE 400W 230V R7s L114mm 9000lm Maximum wind load area 0.13m2
∅153 36666 4
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety glass: corrosion-resistant cast alu-
135°
5000 cd
105°
Mean illuminance En (wall) Wall height (m) 6.0 Offset from wall (m) 2.00 2.00 2.50 2.50 Luminaire spacing (m) 2.00 3.00 2.50 3.50 263 177 188 135 Illuminance En (lx)
QT-DE12-RE
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety glass: corrosion-resistant cast alu480 4666666666 3
684 46666666666666 3
213 4666 3
Weight 14.80kg LMF E I0qp krrIP65
∅153 36666 4
33247.000 Graphit m 33223.000 White (RAL9002) 33222.000 Silver m QT-DE12 1000W 230V R7s L186mm 22000lm Maximum wind load area 0.25m2
minium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 923
480 4666666666 3
135°
15000 cd
105°
Mean illuminance En (wall) Wall height (m) 8.0 Offset from wall (m) 3.00 3.00 4.00 4.00 Luminaire spacing (m) 3.00 4.00 4.00 5.00 383 290 235 189 Illuminance En (lx)
QT-DE12
Parscoop Washlight with cantilever for tungsten halogen lamps Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. Cantilever: stainless steel tube, powdercoated. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver anodised. Without spill light. Weight 6.70kg LMF E I0qp krrIP65
245 46666 3
m 2
1072 4666666666666666 3 377 46666666 3
33290.000 Graphit m QT-DE12-RE 230W 230V R7s L114mm 5000lm Maximum wind load area 0.1m2
120 3666 4
916
ERCO Program 2012
Screw-fastened cover frame with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 923
H=1m f=1.00
20
1 0 1
QT-DE12-RE
200 1
50 2
3
4 m
www.erco.com
Parscoop Washlight with mounting bracket for tungsten halogen lamps
Weight 3.60kg LMF E I0qp rIP44
245 466666 3
361 466666666 3
245 466666 3
QT-DE12-RE
340
46666663 503 4666666666 3
340 4666666 3
QT-DE12-RE
480 4666666666 3
643 64666666666666 3
www.erco.com
480 4666666666 3
minium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 924
Mean illuminance En (wall) Wall height (m) 8.0 Offset from wall (m) 3.00 3.00 4.00 4.00 Luminaire spacing (m) 3.00 4.00 4.00 5.00 383 290 235 189 Illuminance En (lx)
213 4666 3
Weight 14.30kg LMF E I0qp rIP44
36666 6666 4∅ 120
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Heat-resistant cable with plug. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety glass: corrosion-resistant cast alu33280.000 Graphit m QT-DE12 1000W 230V R7s L186mm 22000lm Maximum wind load area 0.25m2
minium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 924
Mean illuminance En (wall) Wall height (m) 6.0 Offset from wall (m) 2.00 2.00 2.50 2.50 Luminaire spacing (m) 2.00 3.00 2.50 3.50 263 177 188 135 Illuminance En (lx)
155 36666 4
Weight 7.80kg LMF E I0qp rIP44
36666 6666 4∅ 120
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Heat-resistant cable with plug. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety glass: corrosion-resistant cast alu33274.000 Graphit m QT-DE12-RE 400W 230V R7s L114mm 9000lm Maximum wind load area 0.13m2
minium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 924
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.50 1.50 2.00 2.00 Luminaire spacing (m) 1.50 2.50 2.00 3.00 387 234 250 167 Illuminance En (lx)
118 36666 4
33271.000 Graphit m QT-DE12-RE 230W 230V R7s L114mm 5000lm Maximum wind load area 0.07m2
3666664∅120 666
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Heat-resistant cable with plug. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety glass: corrosion-resistant cast alu-
QT-DE12
ERCO Program 2012
917
Parscoop Washlight with mounting plate for metal halide lamps
Weight 5.30kg LMF E I0qp krrIP65
245 466666 3
388 466666666 3
245 466666 3
Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 923
130 36666 4
33242.000 Graphit m 33213.000 White (RAL9002) 33212.000 Silver m HIT-CE 35W G12 3300lm Maximum wind load area 0.07m2
366666666 4∅120
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor. Capacitor.
135°
1500 cd
105°
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.50 1.50 2.00 2.00 Luminaire spacing (m) 1.50 2.50 2.00 3.00 227 137 147 99 Illuminance En (lx)
HIT-CE
Weight 10.20kg LMF E I0qp krrIP65
340 4666666 3
544 46666666666 3
340 4666666 3
135°
Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 923
155 36666 4
33245.000 Graphit m 33219.000 White (RAL9002) 33218.000 Silver m HIT-DE-CE 70W RX7s 6500lm HST-DE 70W possible. Maximum wind load area 0.13m2
∅153 36666 4
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. 2 cable entries. Through-wiring possible. 3-pole terminal block. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor. Capacitor.
3000 cd
105°
Mean illuminance En (wall) Wall height (m) 6.0 Offset from wall (m) 2.00 2.00 2.50 2.50 Luminaire spacing (m) 2.00 3.00 2.50 3.50 237 158 172 123 Illuminance En (lx)
Weight 10.70kg LMF E 0qp krrIP65
340 4666666 3
544 46666666666 3
340 4666666 3
135°
105°
155 36666 4
33246.000 Graphit m 33221.000 White (RAL9002) 33220.000 Silver m HIT-DE-CE 150W RX7s 14200lm HST-DE 150W possible. Maximum wind load area 0.13m2
∅153 36666 4
HIT-DE-CE
7500 cd
Mean illuminance En (wall) Wall height (m) 6.0 Offset from wall (m) 2.00 2.00 2.50 2.50 Luminaire spacing (m) 2.00 3.00 2.50 3.50 381 255 271 194 Illuminance En (lx)
HIT-DE-CE
918
ERCO Program 2012
www.erco.com
Parscoop Washlight with mounting plate for metal halide lamps Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver anodised. Without spill light. 480 4666666666 3
684 46666666666666 3
213 4666 3
Weight 20.50kg LMF E 0qp krrIP65
∅153 36666 4
33249.000 Graphit m 33227.000 White (RAL9002) 33226.000 Silver m HIT-DE 250W Fc2 20000lm Maximum wind load area 0.25m2
Screw-fastened cover frame with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 923
480 4666666666 3
135°
12500 cd
105°
Mean illuminance En (wall) Wall height (m) 8.0 Offset from wall (m) 3.00 3.00 4.00 4.00 Luminaire spacing (m) 3.00 4.00 4.00 5.00 316 238 201 161 Illuminance En (lx)
HIT-DE 480 4666666666 3
684 46666666666666 3
213 4666 3
Weight 21.20kg LMF E 0qp krrIP65
∅153 36666 4
33250.000 Graphit m 33229.000 White (RAL9002) 33228.000 Silver m HIT-DE 400W Fc2 35000lm HST-DE 400W possible. Maximum wind load area 0.25m2
480 4666666666 3
135°
25000 cd
105°
Mean illuminance En (wall) Wall height (m) 8.0 Offset from wall (m) 3.00 3.00 4.00 4.00 Luminaire spacing (m) 3.00 4.00 4.00 5.00 553 417 352 282 Illuminance En (lx)
HIT-DE
Parscoop Washlight with cantilever for metal halide lamps Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. Cantilever: stainless steel tube, powdercoated. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. 2 cable entries. Through-wiring possible. 3-pole terminal block. Weight 8.30kg LMF E Ip krrIP65
245 46666 3
m 2
1072 4666666666666666 3 377 46666666 3
33291.000 Graphit m HIT-CE 35W G12 3300lm Maximum wind load area 0.1m2
120
36664
www.erco.com
Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 923
H=1m f=1.00
2
1 0
200
50
1
HIT-CE
1
2
10 3
4 m
ERCO Program 2012
919
Parscoop Washlight with mounting bracket for metal halide lamps
Weight 5.20kg LMF E I0qp rIP44
245 466666 3
361 466666666 3
245 466666 3
HIT-CE
503 4666666666 3
33276.000 Graphit m HIT-DE-CE 150W RX7s 14200lm HST-DE 150W possible. Maximum wind load area 0.13m2
Weight 10.20kg LMF E 0 q p rIP44
340 4666666 3
503 4666666666 3
340 4666666 3
340 4666666 3
155 36666 4
46666663
HIT-DE-CE Mean illuminance En (wall) Wall height (m) 6.0 Offset from wall (m) 2.00 2.00 2.50 2.50 Luminaire spacing (m) 2.00 3.00 2.50 3.50 381 255 271 194 Illuminance En (lx) HIT-DE-CE
33282.000 Graphit m HIT-DE 400W Fc2 35000lm HST-DE 400W possible. Maximum wind load area 0.25m2
Weight 20.70kg LMF E 0 q p rIP44
480 4666666666 3
643 64666666666666 3
920
ERCO Program 2012
480 4666666666 3
36666 6666 4∅ 120
643 64666666666666 3
480 4666666666 3
glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 924
Mean illuminance En (wall) Wall height (m) 8.0 Offset from wall (m) 3.00 3.00 4.00 4.00 Luminaire spacing (m) 3.00 4.00 4.00 5.00 316 238 201 161 Illuminance En (lx)
213 4666 3
480 4666666666 3
HIT-DE Mean illuminance En (wall) Wall height (m) 8.0 Offset from wall (m) 3.00 3.00 4.00 4.00 Luminaire spacing (m) 3.00 4.00 4.00 5.00 553 417 352 282 Illuminance En (lx)
213 4666 3
Weight 20.00kg LMF E 0 q p rIP44
36666 6666 4∅ 120
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. Heat-resistant cable with plug. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety 33281.000 Graphit m HIT-DE 250W Fc2 20000lm Maximum wind load area 0.25m2
glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 924
Mean illuminance En (wall) Wall height (m) 6.0 Offset from wall (m) 2.00 2.00 2.50 2.50 Luminaire spacing (m) 2.00 3.00 2.50 3.50 237 158 172 123 Illuminance En (lx)
155 36666 4
340
36666 6666 4∅ 120
Weight 9.70kg LMF E I0qp rIP44
36666 6666 4∅ 120
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. Heat-resistant cable with plug. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety 33278.000 Graphit m HIT-DE-CE 70W RX7s 6500lm HST-DE 70W possible. Maximum wind load area 0.13m2
glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 924
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.50 1.50 2.00 2.00 Luminaire spacing (m) 1.50 2.50 2.00 3.00 227 137 147 99 Illuminance En (lx)
118 36666 4
33273.000 Graphit m HIT-CE 35W G12 3300lm Maximum wind load area 0.07m2
3666664∅120 666
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. Heat-resistant cable with plug. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety
HIT-DE
www.erco.com
Parscoop Washlight with mounting plate for compact fluorescent lamps
Weight 9.00kg LMF E I0qp krrIP65
340 4666666 3
544 46666666666 3
340 4666666 3
135°
glass: corrosion-resistant cast aluminium, double powder-coated. Hinge open for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 923
155 36666 4
33244.000 Graphit m ECG 33217.000 White (RAL9002) ECG 33216.000 Silver m ECG TC-TEL 42W GX24q-4 3200lm Maximum wind load area 0.13m2
∅153 36666 4
Housing, hinge and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Mounting plate rotatable through 240°. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety
1250 cd
105°
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.50 1.50 2.00 2.00 Luminaire spacing (m) 1.50 2.50 2.00 3.00 242 147 151 102 Illuminance En (lx)
TC-TEL
Parscoop Washlight with mounting bracket for compact fluorescent lamps
Weight 8.50kg LMF E I0qp rIP44
340
46666663 503 4666666666 3
340 4666666 3
minium, double powder-coated. Hinge open for lamp replacement. Mounting accessories to be ordered separately. Accessories page 924
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.50 1.50 2.00 2.00 Luminaire spacing (m) 1.50 2.50 2.00 3.00 242 147 151 102 Illuminance En (lx)
155 36666 4
33279.000 Graphit m ECG TC-TEL 42W GX24q-4 3200lm Maximum wind load area 0.13m2
36666 6666 4∅ 120
For mounting on accessories. Housing, hinge and mounting bracket: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Hinge with internal wiring, 90° tilt. Graduated disc: corrosion-resistant aluminium. Electronic control gear. Heat-resistant cable with plug. Reflector: aluminium, silver anodised. Without spill light. Screw-fastened cover frame with safety glass: corrosion-resistant cast alu-
TC-TEL
Bærum Rådhus, Sandvika. Architect: Magnus Poulsson (1881-1951). Lighting design: Linda Knoph Vigsnæs, Hvalstad.
www.erco.com
ERCO Program 2012
921
Parscoop 34959.000
34957.000 34961.000 34962.000
34959.000
34963.000
34963.000
34950.000
∅ 120
∅ 89
∅ 89
∅ 89
34958.000 34960.000
34958.000
34950.000
34957.000
∅ 76
∅ 76
∅ 76
Europabad, Karlsruhe. Architect: Geier + Geier, Stuttgart. Lighting design: b.i.g. Bechtold Ingenieurgesellschaft, Karlsruhe.
922
ERCO Program 2012
www.erco.com
www.erco.com
00 1 .0
00 34
99
0 .0
00 99 34 00 1.0
34 99
1.0 0
2.0 0
33 98
0
34
1.0 0
33 98
0
4.0 0
33 97
• • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • •
• • •
•
• •
99
2.0
00
33
98
2 .0
00 1 .0
00 98 98 33
4.0 0
0
• • • •
0
98
1.0
00
33
97 33 00
4.0 97 33
0
33
00 4.0
34
97
9 .0
00 4 .0
00 33
97
4 .0
00 34 00 82
9.0
00 3.0
0
• • • •
34 97
34 94
• • • • • • • • • • • •
• •
34 94
• • •
• •
9.0 0
• • •
• •
• • • •
3.0 0
• • •
0
0 2.0 0
83
93
0 1.0 0
34
•
• • •
97
83
82
9 .0
00 3 .0
00 34 00
• • • •
34 94
• • • •
34 94
• • • •
34 94
• • • •
0
• • • • • • • • • • • •
• • • •
• • •
• •
• • • • • • • • • • • •
• • • •
• • •
• •
• •
0.0 0
34
93
2.0
00 1.0 93
92
2 .0
00 92 34
92 34 00
0.0 93
•
0
34
•
4.0 0
34
00 4.0 93
1 .0
00 0 .0
00 92 34
92
4 .0
00 5 .0 00 5.0
• • • •
0
34
• • • •
5.0 0
34
• • • •
• • • • • • • •
83 82
• • •
• • • •
• •
0 34 90
33222.000 33223.000 33226.000 33227.000 33228.000 33229.000 33247.000 33249.000 33250.000
• • • •
93
2.0 90 34
• • • •
3.0 0
33214.000 33215.000 33216.000 33217.000 33218.000 33219.000 33220.000 33221.000 33243.000 33244.000 33245.000 33246.000
34
92
• • • •
34 94
• • • •
00
33210.000 33211.000 33212.000 33213.000 33241.000 33242.000 33290.000 33291.000
34
34
90
1 .0
00
Parscoop Accessories
ERCO Program 2012
923
00 3 4 5 .0 92 00 3 4 4 .0 92 00 3 4 0 .0 92 00 3 4 1 .0 92 00 3 4 2 .0 92 00 3 .0 83 00 82 9 .0 34 00 96 3 4 4 .0 96 00 5 .0 34 00 97 4 .0 00 33 97 5 .0 00 33 98 0 .0 00 33 98 2 .0 34 00 96 3 4 2 .0 96 00 3 .0 34 00 95 8 .0 00 34 95 9 .0 00 34 96 0 .0 00 34 96 1 .0 00 34 95 0 .0 00 34 95 7 .0 00
• •
• •
34
34
33274.000 33276.000 33278.000 33279.000
• • • •
• • • •
34 0 94 34 5.0 94 00 34 4.0 94 00 34 0.0 94 00 34 1.0 94 00 34 2.0 94 00 3.0 83 00 82 9.0 34 00 96 34 4.0 96 00 5.0 34 00 97 4.0 00 33 97 5.0 00 33 98 0.0 00 33 98 2.0 34 00 96 34 2.0 96 00 3.0 34 00 95 8.0 00 34 95 9.0 00 34 96 0.0 00 34 96 1.0 00 34 95 0.0 00 34 95 7.0 00
33280.000 33281.000 33282.000
• • •
• • •
92
34
90
1 .0 34
33271.000 33273.000
34 9
Parscoop Accessories
• •
• •
• •
•
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
93
34 5.0 93 00 34 4.0 93 00 34 0.0 93 00 34 1.0 93 00 34 2.0 93 00 3.0 83 00 82 9.0 34 00 96 34 4.0 96 00 5.0 34 00 97 4.0 00 33 97 5.0 00 33 98 0.0 00 33 98 2.0 34 00 96 34 2.0 96 00 3.0 34 00 95 8.0 00 34 95 9.0 00 34 96 0.0 00 34 96 1.0 00 34 95 0.0 00 34 95 7.0 00
• •
• • • •
• • • •
• • • •
• • • •
• • • •
•
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
03 .00
90
2.0
00
• •
34925.000 34935.000 34945.000 Skintone filter
924
• • •
• • •
• • •
34924.000 34934.000 34944.000 Daylight conversion filter
ERCO Program 2012
• • •
• • •
•
34920.000 34930.000 34940.000 Colour filter Magenta
• • •
• • •
• • •
• • •
34921.000 34931.000 34941.000 Colour filter Amber
• • •
• • •
34922.000 34932.000 34942.000 Colour filter Sky blue
• • •
• • •
• • •
• • •
34923.000 34933.000 34943.000 Colour filter Night blue
• • •
• • •
• • •
• • •
34901.000 34902.000 34903.000 Fixing frame for filters. Metal, graphit m, powder-coated.
www.erco.com
Parscoop Accessories
58 70 3 46666 3 4666
34964.000 Cable junction box Plastic, black. Terminal block 2 of 5x2.5mm2 . 1 fuse D01 E14 10A. Weight 0.25kg
∅ 115 36664 6666
d 124 4 6663 200 466666 3
∅ 60
6663664
24 66 3664
33982.000 Mounting plate Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 1.70kg
36666666 4∅ 120
34962.000 Post Metal, hot-dip galvanised. Graphit m, double powder-coated. Mounting plate: metal. 5-pole terminal block for cable 5x2.5mm2 . Through-wiring possible. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP44 in connection with mounted luminaire. Weight 5.60kg
33980.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.30kg
3666666 4∅ 89
579 46666666666 3
33979.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.25kg
d 260 46666666 3
4666663
200
33981.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.76kg
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
d 124 4 6663 200 466666 3
600
4666666663
502 6466666666 3
3664 6666
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
d 124 4 6663
34965.000 Cable junction box Plastic, grey. Terminal block 2 of 5x6mm2 . 1 fuse D01 E14 10A. Weight 0.55kg
∅ 83
∅ 60 666 3664
33974.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 2.30kg
75 36666 4
693 64666666666666 3
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
62 3666 4
260 4666666666 3
65 3666 4 160 466666 3
90 4666666 3 45 466 3
65 3666 4
34963.000 Post for adapter sleeves. Metal, hot-dip galvanised. Graphit m, double powder-coated. Mounting plate: metal. 5-pole terminal block for cable 5x2.5mm2 . Through-wiring possible. IP44 protection mode when used with relevant accessories. Not for concrete anchor 33980.000 and mounting plate 33982.000. Weight 1.50kg
Brunner Communications Centre, Rheinau-Freistett. Architecture and lighting design: Schneider+ Schumacher, Frankfurt.
www.erco.com
ERCO Program 2012
925
Parscoop Accessories ∅ 116
407 466666 3
34950.000 Cantilever arm For mounting on adapter sleeve or wall. For standing luminaire installation. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Inspection cover: corrosion-resistant aluminium, double powder-coated in graphit m. 1 cable entry. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP44 in connection with mounted luminaire. Weight 3.55kg
34959.000 Adapter sleeve for posts ø 89mm and cantilever arms. Housing and cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powdercoated. Screw fixing. Terminal block 5x2,5mm2 . Throughwiring possible. 2 cable entries for cantilever arms. Protection mode IP44 only with accessories. Posts ø 89mm and cantilever arms to be ordered separately. Weight 3.20kg
161 466666 3
34960.000 Adapter sleeve for poles ø 76mm. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Screw fixing. 3-pole terminal block for control line. Through-wiring possible. Luminaire rotatable through 360°. Protection mode IP44 only with mounted luminaire. Weight 2.55kg
120 4666 3
34957.000 Side-mounted sleeve For mounting on adapter sleeve. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. 1 cable entry. 3-pole terminal block for control line. Luminaire rotatable through 360°. Protection mode IP65 only with mounted luminaire. Weight 0.90kg
120 4∅666 3 160 46666 3
160 46666 3
120 4∅666 3
3666 420 34990.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.16kg
34961.000 Adapter sleeve for posts ø 89mm. Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Screw fixing. 3-pole terminal block for control line. Through-wiring possible. Luminaire rotatable through 360°. Protection mode IP44 only with mounted luminaire. Weight 1.95kg
153 466666 3
150 95 3∅666 4 3664
120 176 3666 4 463
34958.000 Adapter sleeve for poles ø 76mm and cantilever arms. Housing and cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powdercoated. Screw fixing. Terminal block 5x2,5mm2 . Throughwiring possible. 2 cable entries for cantilever arms. Protection mode IP44 only with accessories. Cantilever arms to be ordered separately. Poles ø 76mm to be ordered separately. Weight 3.80kg
4663
120 466666 3
297 466666666 3
4663
83 466 3
297 466666666 3
∅ 116
3666 420 34991.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.23kg
Apple Store, Regent St., London. Lighting designer: ISP Design Miami, Sylvia Bistrong.
926
ERCO Program 2012
www.erco.com
Faรงade luminaires Vertical surfaces in an urban setting contribute significantly to the spatial definition of squares, road axes and buildings. From the point of view of perception psychology and design, facade lighting thus is a key element in the night lighting concept for urban areas. Different types of facade require specific lighting concepts to bring out the qualities of the architecture. The wide range of facade luminaires allows for a variety of lighting solutions that range from grazing light on facades to pathway lighting.
Kubus
LED High-pressure discharge lamps
Axis Walklight
LED
Visor
Low-voltage halogen lamps High-pressure discharge lamps Fluorescent lamps
942 942 943
Lightmark
Low-voltage halogen lamps Tungsten halogen lamps High-pressure discharge lamps Fluorescent lamps
947
LED Low-voltage halogen lamps High-pressure discharge lamps
953 956
Cylinder
www.erco.com
931 932
934 935
938
949 949
947 948
953 957 958
949 950
954 957
ERCO Program 2012
927
Faรงade luminaires
Focalflood
LED
Site
Fluorescent lamps
962
965
964
New in the program
Cylinder 951
928
ERCO Program 2012
www.erco.com
Kubus Faรงade and bollard luminaires The outdoor luminaires of the Kubus range feature powerful light sources in an extremely compact form to accentuate faรงades or illuminate pathways near buildings. The system design of Kubus works universally with square housings using different lighting technologies. The safety glasses fitted within the luminaires produce flush surfaces that are easy to clean. By using recessed housing versions, the Kubus can be integrated into architecture discreetly. The combination of reflectors/lenses for Kubus luminaires results in precise and efficient light emissions without spill light and provides optimum visual comfort.
Washlighting Wide- beam illumination of pathways and open areas.
Floor washlights Asymmetrical washlighting with a wide or deep beam for the illumination of pathways or squares.
LED 3,2W - 6,7W 240lm - 540lm Wide beam, deep beam High- pressure discharge lamps 20W 1800lm Deep beam
Accentuation Emphasis of the faรงade produced by a narrow light beam.
Faรงade luminaires Asymmetrical light distribution for accentuated faรงade lighting.
LED 3,2W - 6,7W 240lm - 540lm Spot High- pressure discharge lamps 20W 1800lm
www.erco.com
ERCO Program 2012
929
Kubus Façade and bollard luminaires
The floor washlights can be installed on buildings, but can also be mounted on a post made of corrosion- resistant cast aluminium for positioning in open areas.
The Kubus can be mounted to suit any situation using ERCO’s range of accessories: a mounting plate, a post, a base, and a concrete anchor.
Depending on the required characteristics, there are various mounting alternatives. All Kubus luminaires can be used on walls as surfacemounted versions.
Kubus floor washlights can also be mounted on a post available as an accessory and freely positioned in an area for use as a bollard luminaire.
The floor washlights are also suitable for flush wall mounting using the recessed housing or mounting tray available as accessories.
The Kubus floor washlights can be used for both pathway lighting and for the illumination of open areas. The lens system of the LED floor washlight for pathway lighting spreads the beam to produce a distinct oval pattern parallel to the wall. The Softec lens as lamp cover thus produces a soft luminance gradient. Contrary to the Kubus floor washlights for pathway lighting, the floor washlights for open area illumination emit the light deeper into the room. A small component of light also illuminates the wall below the luminaire to produce an eyecatcher on the building.
The lighting technology of the Kubus façade luminaire in the LED version produces a narrow beam of grazing light directed upwards on the wall. The variant with metal halide lamp, on the other hand, emits wide- beam grazing light onto the façade.
930
ERCO Program 2012
www.erco.com
Kubus Floor washlight with LED Housing and wall plate: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Optimised surface for reduced accumulation of dirt. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Softec lens as safety glass. Protection mode IP65: dust-proof and water jet-proof. Accessories page 933
33366.000 Graphit m LED 3.2W 300lm 4000K neutral white Version 4 Prism lens, deep beam Housing temperature 34°C Temperature on the light aperture 35°C
33367.000 Graphit m LED 3.2W 240lm 3000K warm white Version 4 Prism lens, deep beam Housing temperature 34°C Temperature on the light aperture 35°C
0.68m f=1.00
124 466666 3
0.5 2
4666663
LED
m 3.2 2.4 1.6 0.8
0.5 2
m 1.6 0.8 0.0
4666663
0.8
60
4663
LED
m 3.2 2.4 1.6 0.8 0.68m f=1.00
0.5 2 10 50
124 466666 3
Weight 0.88kg LMF E 0qp krrIP65
4663
0.68m f=1.00
124
Weight 0.88kg LMF E 0qp krrIP65
0.8
0.8
60
124 466666 3
Weight 0.88kg LMF E 0qp krrIP65
m 1.6
0.0
124
124 466666 3
33365.000 Graphit m LED 3.2W 240lm 3000K warm white Version 4 Sculpture lens, wide beam Housing temperature 34°C Temperature on the light aperture 35°C
Weight 0.88kg LMF E 0qp krrIP65
60 466 3
2 10
60 466 3
0.8 0.0
m 3.2 2.4 1.6 0.8
0.68m f=1.00
124 466666 3
m 1.6
0.8
LED
124 466666 3
33364.000 Graphit m LED 3.2W 300lm 4000K neutral white Version 4 Sculpture lens, wide beam Housing temperature 34°C Temperature on the light aperture 35°C
0.5
m 1.6 0.8
50
0.0 0.8
LED
m 3.2 2.4 1.6 0.8
Housing and wall plate: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Optimised surface for reduced accumulation of dirt. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Non-reflective safety glass. Protection mode IP65: dust-proof and water jet-proof. Accessories page 933
33528.000 Graphit m LED 6.7W 435lm 3000K warm white Version 4 Spherolit lens, wide beam Housing temperature 34°C Temperature on the light aperture 35°C
www.erco.com
1.80m f=1.00
0.5 2
150 4666666 3
Weight 1.50kg LMF E 0qp krrIP65
4666663 Weight 1.50kg LMF E 0qp krrIP65
m 4 2 0
124
2
90
46663
LED
m 8
6
4
2
1.80m f=1.00
0.5 2
150 4666666 3
33529.000 Graphit m LED 6.7W 540lm 4000K neutral white Version 4 Spherolit lens, wide beam Housing temperature 34°C Temperature on the light aperture 35°C
m 4 2 0
124 466666 3
90 4666 3
2
LED
m 8
6
4
2
ERCO Program 2012
931
Kubus Floor washlight with LED
33530.000 Graphit m LED 6.7W 435lm 3000K warm white Version 4 Spherolit lens, deep beam Housing temperature 34°C Temperature on the light aperture 35°C
1.80m f=1.00
0.5
150 4666666 3
Weight 1.50kg LMF E 0qp krrIP65
10
Weight 1.50kg LMF E 0qp krrIP65
m 4 2 0
124 466666 3
90 4666 3
2
LED
m 8
6
4
0.5 2 10
124 466666 3
90 4666 3
2
2
1.80m f=1.00
150 4666666 3
33531.000 Graphit m LED 6.7W 540lm 4000K neutral white Version 4 Spherolit lens, deep beam Housing temperature 34°C Temperature on the light aperture 35°C
m 4 2 0 2
LED
m 8
6
4
2
Kubus Floor washlight for metal halide lamps Housing and wall plate: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Optimised surface for reduced accumulation of dirt. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver, satin matt anodised. Spread lens as safety glass. Protection mode IP65: dust-proof and water jet-proof. Accessories page 933 Weight 1.73kg LMF E I5p krrIP65
0.68m f=1.00
0.5 2
150 4666666 3
33519.000 Graphit m ECG HIT-TC-CE 20W GU6.5 1800lm Housing temperature 55°C Temperature on the light aperture 77°C
m 4 2 0
124
4666663
2
90
46663
HIT-TC-CE
m 8
6
4
2
Wiesbadener Volksbank Private Banking, Wiesbaden. Lighting design: Arne Fiedler, Wiesbaden.
932
ERCO Program 2012
www.erco.com
00
• • • • •
• • • • •
• • • • •
33329.000 Concrete housing Plastic. 2 cable entries. Recommended 0-8mm aggregate for the concrete. Recessed mounting plate to be ordered separately. Weight 0.79kg
354
46666663
100 3666 4
273 466666 3
4135 663
200 4666 3
4150 663
33524.000 Concrete housing Metal, hot-dip galvanised. 2 cable entries. Recommended 0-8mm aggregate for the concrete. Recessed mounting plate to be ordered separately. Weight 3.50kg
4135 663 262 46666 3
33
98
3 .0
00 9 .0
00 33
97
5 .0
00 33
97
33
36
3 .0
00 6 .0
00 33
• • •
• • • • •
362 46666666 3
273
52
4 .0 52
• • •
4135 663
204 4666 3
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
00
• • •
33
52
5 .0
00
• •
33
33
2 .0
00
• •
33
32
9 .0
00 2 .0
33
36
• •
262 46666 3
• • • • •
4666663
33364.000 33365.000 33366.000 33367.000 33519.000 33530.000 33531.000
33
34
97
4 .0
00
Kubus Accessories
204 4666 3
100 3666 4
33332.000 Housing for recessed mounting for recessed mounting in brickwork. Plastic. 2 cable entries. Recessed mounting plate to be ordered separately. Weight 0.35kg
RDS Radio Dimensione Suono headquarter, Rome. Architect: Nigel Rayan. Lighting design: Baldieri, Rome.
www.erco.com
ERCO Program 2012
933
Kubus Accessories
146 93 36666 4 3666 4
97
4666663 3664 33362.000 Recessed mounting plate for concrete housings and housings for recessed mounting. Metal, graphit m, powder-coated. 2 cable entries. Concrete housings and housings for recessed mounting to be ordered separately. Weight 0.25kg
200 466666 3
220 4666666 3
d 124 4 6663
33979.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.25kg
33525.000 Recessed mounting plate for concrete housings and housings for recessed mounting. Metal, graphit m, powder-coated. 2 cable entries. Concrete housings and housings for recessed mounting to be ordered separately. Weight 0.39kg
220 666 364 4666666 3 15.5
33983.000 Mounting plate Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 1.00kg
∅ 60
6663664
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
800 466666666666 3
33526.000 Housing for recessed mounting for recessed mounting in brickwork. Corrosion resistant stainless steel. 2 cable entries. Recessed mounting plate to be ordered separately. Weight 1.00kg
502 6466666666 3
146 63 36666 4 366 4
3664 6666
135 x 354 26666666 1
366 46666666 3
266661
275 466666 3
354 4666666 3
411.5 466666666 3 273
135 x 262
∅ 83
4135 663
124 94 3666 4 366 4
33363.000 Post Aluminium profile, No-Rinse surface treatment. Double powder-coated. Base plate for mounting on ground socket, concrete anchor or mounting plate: cast aluminium. 2 screwed cable glands M20. Mounting accessories to be ordered separately. Weight 2.70kg
Kubus Façade luminaire with LED Housing and wall plate: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Optimised surface for reduced accumulation of dirt. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Softec lens as safety glass. Protection mode IP65: dust-proof and water jet-proof.
33369.000 Graphit m LED 3.2W 240lm 3000K warm white Version 4 Housing temperature 34°C Temperature on the light aperture 35°C
934
ERCO Program 2012
150°
124 466666 3
Weight 0.88kg LMF E 0qp krrIP65
124 466666 3
Weight 0.88kg LMF E 0qp krrIP65
60 466 3
120°
150°
124 466666 3
60 466 3
3000 cd
150°
120°
LED
124 466666 3
33368.000 Graphit m LED 3.2W 300lm 4000K neutral white Version 4 Housing temperature 34°C Temperature on the light aperture 35°C
120°
3000 cd
150°
120°
LED
www.erco.com
Kubus Façade luminaire with LED Weight 0.88kg LMF F 0qp krrIP65
33536.000 Graphit m LED 3.2W 240lm 3000K warm white Version 4 Sculpture lens Housing temperature 34°C Temperature on the light aperture 35°C
Weight 0.88kg LMF F 0qp krrIP65
150°
124 466666 3
33537.000 Graphit m LED 3.2W 300lm 4000K neutral white Version 4 Sculpture lens Housing temperature 34°C Temperature on the light aperture 35°C
124 466666 3
60 466 3
120°
124 466666 3
60 466 3
150°
120°
LED 150°
124 466666 3
900 cd
900 cd
120°
150°
120°
LED
Housing and wall plate: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Optimised surface for reduced accumulation of dirt. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Non-reflective safety glass. Protection mode IP65: dust-proof and water jet-proof. Weight 1.50kg LMF F 0qp krrIP65
33532.000 Graphit m LED 6.7W 435lm 3000K warm white Version 4 Spherolit lens, spot Housing temperature 34°C Temperature on the light aperture 35°C
Weight 1.50kg LMF F 0qp krrIP65
33535.000 Graphit m LED 6.7W 540lm 4000K neutral white Version 4 Sculpture lens Housing temperature 34°C Temperature on the light aperture 35°C
Weight 1.50kg LMF F 0qp krrIP65
33534.000 Graphit m LED 6.7W 435lm 3000K warm white Version 4 Sculpture lens Housing temperature 34°C Temperature on the light aperture 35°C
Weight 1.50kg LMF F 0qp krrIP65
150°
150 4666666 3
33533.000 Graphit m LED 6.7W 540lm 4000K neutral white Version 4 Spherolit lens, spot Housing temperature 34°C Temperature on the light aperture 35°C
124 466666 3
90 4666 3
120°
150 4666666 3
90 4666 3
120°
1300 cd
120°
150 4666666 3
90 4666 3
150°
150°
120°
LED 150°
124 466666 3
5500 cd
120°
150 4666666 3
90 4666 3
120°
LED 150°
124 466666 3
150°
LED 150°
124 466666 3
5500 cd
1300 cd
120°
150°
120°
LED
Kubus Façade luminaire for metal halide lamps Housing and wall plate: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Optimised surface for reduced accumulation of dirt. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. Reflector: aluminium, silver, satin matt anodised. Anti-glare cover: aluminium, black powder-coated. Optimised lamp screening ensures no direct light emission. Sculpture lens as safety glass.
www.erco.com
Weight 1.75kg LMF E I5p krrIP65
150°
150 4666666 3
33520.000 Graphit m ECG HIT-TC-CE 20W GU6.5 1800lm Sculpture lens Housing temperature 52°C Temperature on the light aperture 88°C
Protection mode IP65: dust-proof and water jet-proof.
124 466666 3
90 4666 3
120°
1000 cd
150°
120°
HIT-TC-CE
ERCO Program 2012
935
Axis Walklight Axis Walklight offers highlydeveloped glare limitation for stairs and paths. The LED module is completely concealed from view for optimal visual comfort. A light sparkle on the rectangular, lens- like cover glass reveals the light emission. The reflector produces a flat and wide beam illuminating the steps all the way to the edge.
Walklights Asymmetrical light distribution for lighting pathways and stairs.
Washlighting Wide- angle illumination of pathways and open areas.
LED 1.7W 64lm - 90lm LED varychrome 3W Optional: varychrome
Private residence, EspergÌrde. Architect: Dall Lindhardtsen, Helsingør.
936
ERCO Program 2012
www.erco.com
Axis Walklight The Axis Walklight provides lighting for pathways, steps and landings. Concrete housings are available for flush- mounting installations in stairs or walls. Due to the use of LEDs, these luminaires provide very economical lighting. The high protection mode IP65 and the connection to mains voltage make the luminaire particularly easy to install and maintenance- free. The IP68rated varychrome version must be operated via a separate controller. Because the direct component of the light from the LEDs is shielded, this is a totally indirect lighting system. This ensures very high glare control and good visual comfort. The luminous flux of the LEDs is defined by the reflector. The reflector produces a wide- spread light distribution across the step. However, the front lens surface maintains a low luminance. The glass is fixed to the housing with adhesive for permanent sealing and a minimised visual impact.
In addition to the neutral white colour temperature, a warm white version is available for the illumination of stairways.
The DALI- compatible luminaires feature digitally addressable control gear with which every single luminaire can be individually
www.erco.com
controlled â&#x20AC;&#x201C; i.e. using the ERCO Light System DALI and the pre- programmed ERCO Light Studio software.
ERCO Program 2012
937
Axis Walklight with LED Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Fixing element: plastic. Clamp extension 7-20mm. 2 cable entries. Through-wiring possible. 3-pole terminal block. Asymmetric reflector lens system: aluminium, silver anodised. Optimised screening for the LEDs ensures no direct light emission. LED module. Cover frame with Softec lens: corrosion-resistant cast aluminium, graphit m double powder-coated. Weight 0.85kg LMF E I0qp krrIP65
0.10m f=1.00
88 466666 3
1
269 4666666666666666666 3
2
LED
Weight 0.85kg LMF E I0qp krrIP65
10
4666663
10 50
2661
269
46666666666666666663
2
LED
0.2 0.0 0.2
m 0.4
1
50 x 254
88
m 0.4
m 0.8 0.6 0.4 0.2 0.10m f=1.00
60 4666 3
33733.000 Reflector silver LED 1.7W 230V AC 64lm 3000K warm white Version 2
50
2661
50 x 254
60 4666 3
33750.000 Reflector silver LED 1.7W 230V AC 90lm 4000K neutral white Version 2
Protection mode IP65: dust-proof and water jet-proof. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 939
0.2 0.0 0.2
m 0.8 0.6 0.4 0.2
Axis Walklight RGB varychrome with LED Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Fixing element: plastic. Clamp extension 7-20mm. 4-core cable, L 1500mm. Asymmetric reflector lens system: aluminium, silver anodised. Optimised screening for the LEDs ensures no direct light emission. LED module. Cover frame with Softec lens: corrosion-resistant cast aluminium, graphit m double powder-coated. The three LED colours red, green and blue are controlled by separate 24V DC Weight 0.85kg LMF E 0qpz koo3mIP68
0.10m f=1.00
88
4666663
0.5 2 10
2661
50 x 254
60 4666 3
33751.000 Reflector silver LED 3W 24V DC 30lm red, green, blue
269
46666666666666666663
Primary colours LED module Colour F(lm) l(nm) Red 10 615-625 Green 17 520-530 Blue 3 460-470
ERCO Program 2012
m 0.4 0.2 0.0 0.2
LED
938
control gear (common 24V, floating earth for PWM (Pulse Width Modulation)). Control gear to be ordered separately. Protection mode: IP68 3m, i.e. protection against the ingress of dust and against the effects of continuous immersion in water up to a maximum depth of 3m. Accessories page 939
m 0.8 0.6 0.4 0.2
S(%) 99 77 96
www.erco.com
00
282
• • •
73 124
•
• • •
256
73
2 .0
00 4 .0
33
97 34
33733.000 33750.000 33751.000
33
89
8 .0
00
Axis Walklight Accessories
104
CO 254
72
33898.000 DALI DALI control gear for 6 Nadir recessed floor luminaires, 8 Axis Walklights or 10 LED orientation luminaires maximum. Input voltage 220-240V AC, 50-60Hz, 25W max., DALI signal. Output voltage 3x24V DC PWM. Max. cable length 10m. Protection mode IP67: dust-proof and protected against the results of temporary immersion. Weight 0.58kg i kooIP67
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
CO 51
33732.000 Concrete housing Metal, hot-dip galvanised. Recommended 0-8mm aggregate for the concrete. Weight 0.94kg
Private residence, Humlebaek. Architect: M-M Arkitekter, Copenhagen.
www.erco.com
ERCO Program 2012
939
Visor Faรงade luminaires The common design feature of the Visor faรงade luminaires is a semi- circular cover glass. As a light source, the Visor faรงade luminaires are discreet and provide high visual comfort. They ensure glare- free light for passersby or road users, as they emit almost no light above the horizontal. Only an unobtrusive refraction of light from the sculpture lens indicates that the light source is switched on. Depending on the photometric option, Visor faรงade luminaires produce wide beams of light which are ideal for lighting pathways, or beams that penetrate deep into an area, which are effective in illuminating open spaces such as public squares or terraces.
Floor washlights Asymmetrical washlighting with a wide or deep beam for the illumination of pathways or squares.
Washlighting Wide- beam illumination of pathways and open areas.
Low- voltage halogen lamps 20W - 50W 320lm - 1250lm Deep beam High- pressure discharge lamps 20W - 35W 1650lm - 3900lm Deep beam Fluorescent lamps 10W - 18W 600lm - 1200lm Wide beam
Hotel Lago, Ulm. Architect: Nething Generalplaner Ulm/NeuUlm. Lighting design: Conplaning GmbH.
940
ERCO Program 2012
www.erco.com
Visor Façade luminaires Floor washlights for pathway lighting In pathway luminaires, the lamp is hidden from the direct view of observers from all positions resulting in good visual comfort. The lens spreads the width of the beam.
2m
0.5 lx
2 lx
20 lx
0m
45°
z
Floor washlights for open area lighting In contrast to the pathway luminaires with their wide light distribution, the open area luminaires direct light up to approximately 8m away. The lamps themselves are shielded by a vertically suspended anti- glare element.
1 lx
0.5 lx 2m
5 lx
20 lx
0m
10°
10°
z
www.erco.com
ERCO Program 2012
941
Visor Floor washlight for low-voltage halogen lamps Housing for recessed mounting in brickwork and dry-wall partitions: corrosion-resistant cast aluminium, Norinse surface treatment. Black double powder-coated. Mounting by means of an adjustable bar. Clamp extension 1-25mm. Predrilled holes in the base of the housing. Electronic transformer 230/240/12V. 2 cable entries. Through-wiring possible. 3-pole terminal block. Asymmetric reflector system: aluminium, silver anodised, mirror-finish. Anti-glare element: metal. No direct light emission. Weight 1.30kg LMF E I56p krrIP65
∅ 132 ∅ 145 4666 3
2 5
125
QT9-ax
Weight 4.20kg LMF E I56p krrIP65
m 8
6
2
4
2
Screw-fastened cover with sculpture lens as safety glass: corrosion resistant stainless steel. Optimised surface for reduced accumulation of dirt. Protection mode IP65: dust-proof and water jet-proof. Accessories page 944
m 4
∅ 227 2666666 1
0.55m f=1.00
∅ 247
466666663
2 10
QT12-ax-RE
m 8
6
4
2 0 2
0.5
130
46663
2 0
0.5
46663
Housing for recessed mounting in brickwork and dry-wall partitions: corrosion-resistant cast aluminium, Norinse surface treatment. Black double powder-coated. Mounting by means of an adjustable bar. Clamp extension 1-35mm. Predrilled holes in the base of the housing. Safety transformer 230/12V. 2 cable entries. Through-wiring possible. 5-pole terminal block. Asymmetric reflector system: aluminium, silver anodised, mirror-finish. Anti-glare element: metal. No direct light emission. 33302.000 Reflector silver QT12-ax-RE 50W 12V GY6.35 1250lm Temperature on the light aperture 90°C
m 4
0.55m f=1.00
26661
33300.000 Reflector silver QT9-ax 20W 12V G4 320lm Temperature on the light aperture 100°C
Screw-fastened cover with sculpture lens as safety glass: corrosion resistant stainless steel. Optimised surface for reduced accumulation of dirt. Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water jet-proof. Accessories page 944
2
Visor Floor washlight for metal halide lamps Housing for recessed mounting in brickwork and dry-wall partitions: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of an adjustable bar. Clamp extension 1-35mm. Predrilled holes in the base of the housing. Electronic control gear. 2 cable entries. Through-wiring possible. 5-pole terminal block. Asymmetric reflector system: aluminium, silver anodised, mirror-finish. Anti-glare element: metal. No direct light emission. Weight 2.70kg LMF E 56p krrIP65 ∅ 247
466666663
942
ERCO Program 2012
m 4
0.55m f=1.00
∅ 227 2666666 1
33306.000 Reflector silver ECG HIT-TC-CE 20W PGJ5 1650lm Temperature on the light aperture 60°C
Screw-fastened cover with sculpture lens as safety glass: corrosion resistant stainless steel. Optimised surface for reduced accumulation of dirt. Protection mode IP65: dust-proof and water jet-proof. Accessories page 944
2 10
46663
0 0.5
130
HIT-TC-CE
m 8
6
4
2
2
2
www.erco.com
Visor Floor washlight for metal halide lamps Housing for recessed mounting in brickwork and dry-wall partitions: corrosion-resistant cast aluminium, Norinse surface treatment. Black double powder-coated. Mounting by means of an adjustable bar. Clamp extension 1-35mm. Predrilled holes in the base of the housing. Electronic control gear. 2 cable entries. Through-wiring possible. 5-pole terminal block. Asymmetric reflector system: aluminium, silver anodised, mirror-finish. Anti-glare element: metal. No direct light emission. Weight 3.70kg LMF E 56p krrIP65
m 4
0.65m f=1.00
5
d277
33304.000 Reflector silver ECG HIT-TC-CE 35W G8.5 3900lm Temperature on the light aperture 60°C
Screw-fastened cover with sculpture lens as safety glass: corrosion resistant stainless steel. Optimised surface for reduced accumulation of dirt. Protection mode IP65: dust-proof and water jet-proof. Accessories page 944
HIT-TC-CE
m 8
6
2 0
0.5
155
d297
1
20
4
2
2
Visor Floor washlight for compact fluorescent lamps Housing for recessed mounting in brickwork and dry-wall partitions: corrosion-resistant cast aluminium, Norinse surface treatment. Black double powder-coated. Mounting by means of an adjustable bar. Clamp extension 1-35mm. Predrilled holes in the base of the housing. Electronic control gear. 2 cable entries. Through-wiring possible. 5-pole terminal block. Asymmetric reflector system: aluminium, silver, satin matt anodised. Screw-fastened cover with sculpture lens as safety glass: corrosion resistant Weight 3.30kg LMF E I5p krrIP65
0.5
∅ 227 ∅ 247
466666663
2
4666666663
www.erco.com
155
466663
1 0 1
TC-DEL
m 4
3
2
1
stainless steel. Optimised surface for reduced accumulation of dirt. Protection mode IP65: dust-proof and water jet-proof. Accessories page 944
m 2
0.65m f=1.00
∅ 277 266666666 1
Weight 3.80kg LMF E I5p krrIP65 ∅ 297
20
130
46663
Housing for recessed mounting in brickwork and dry-wall partitions: corrosion-resistant cast aluminium, Norinse surface treatment. Black double powder-coated. Mounting by means of an adjustable bar. Clamp extension 1-35mm. Predrilled holes in the base of the housing. Electronic control gear. 2 cable entries. Through-wiring possible. 5-pole terminal block. Asymmetric reflector system: aluminium, silver, satin matt anodised. Screw-fastened cover with sculpture lens as safety glass: corrosion resistant 33303.000 Reflector silver ECG TC-DEL 18W G24q-2 1200lm Temperature on the light aperture 40°C
m 2
0.55m f=1.00
26666661
33301.000 Reflector silver ECG TC-DEL 10W G24q-1 600lm Temperature on the light aperture 40°C
stainless steel. Optimised surface for reduced accumulation of dirt. Protection mode IP65: dust-proof and water jet-proof. Accessories page 944
0.5
2 20
1 0 1
TC-DEL
m 4
3
2
1
ERCO Program 2012
943
00
33
33976.000 Concrete housing Metal, galvanised. Recommended 0-8mm aggregate for the concrete. Weight 3.60kg
d254
33984.000 Surface-mounted housing Corrosion-resistant aluminium, NoRinse surface treatment. Graphit m, double powder-coated. Weight 0.88kg
∅ 277 4666666 3
4663 145 466 3
145 466 3
33977.000 Concrete housing Metal, galvanised. Recommended 0-8mm aggregate for the concrete. Weight 4.50kg
184
Q 430 46666666666 3
• •
Q 340 466666666 3
•
98
5 .0
00 4 .0
00
• •
∅ 132
• •
33
98
2 .0
00 97 33
97
•
161
33970.000 33971.000 33972.000 Plaster ring Metal, white.
1 .0
00
• •
58 70 3 46666 3 4666
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
33
97
0 .0
00
33
33
• •
∅ 227 466666 3
•
•
Q 240 466666 3
• •
97
8 .0
00 7 .0
00
•
33
•
97
6 .0 97 33
•
90 4666666 3 45 466 3
33300.000 33301.000 33302.000 33303.000 33304.000 33306.000
83
82
9 .0
00
Visor Accessories
185 46666 3
33978.000 Concrete housing Metal, galvanised. Recommended 0-8mm aggregate for the concrete. Weight 8.00kg
d304
33985.000 Surface-mounted housing Corrosion-resistant aluminium, NoRinse surface treatment. Graphit m, double powder-coated. Weight 1.18kg
Nasjonalmuseet for kunst, arkitektur og design (Museum of Architecture), Oslo. Architect: Prof. Arch. Sverre Fehn, Oslo.
944
ERCO Program 2012
www.erco.com
Lightmark Façade luminaires Features of the rectangular Lightmark façade luminaires include asymmetrical light emission and effective anti- glare protection. The Dark Sky technology prevents light from being emitted above the horizontal and so maximises visual comfort. Depending on the photometric option selected, Lightmark floor washlights produce a wide beam of light which is ideal for lighting pathways, or a beam that penetrates deep into an area, which is effective in illuminating open spaces such as public squares or terraces. The Lightmark façade luminaires are suitable for uniform illumination of exterior walls and façades.
Washlighting Wide- beam illumination of pathways and open areas.
Floor washlights Asymmetrical washlighting with a wide or deep beam for the illumination of pathways or squares.
Low- voltage halogen lamps 50W 1250lm Wide beam High- pressure discharge lamps 20W - 35W 1800lm - 3900lm Wide beam, deep beam Fluorescent lamps 18W Wide beam
Accentuation Emphasis of objects or architectural elements produced by a narrow beam.
www.erco.com
Façade luminaires Asymmetrical light distribution for accentuated façade lighting.
Tungsten halogen lamps 120W - 230W 2300lm - 5000lm High- pressure discharge lamps 35W - 70W 3300lm - 6500lm
ERCO Program 2012
945
Lightmark Faรงade luminaires Floor washlights for pathway lighting In pathway luminaires, the lamp is hidden from the direct view of observers from all positions resulting in good visual comfort. The spread lens extends the beam so that paths can be lit uniformly along their length.
2m
0,5 lx 2 lx 10 lx
0m
The soft- edged beam creates a pleasant transition from bright to darker surroundings. The gentle gradient of the beam improves perception, as the eye requires less adaptation between significant contrasts.
Floor washlights for open area lighting In contrast to the pathway luminaires with their wide light distribution, the open area luminaires with sculpture lenses direct light far forward. The lamps themselves are shielded by a vertically suspended anti- glare element.
2m
0,5 lx
946
ERCO Program 2012
1 lx
5 lx 20 lx
0m
www.erco.com
Lightmark Floor washlight for low-voltage halogen lamps Housing for recessed mounting in brickwork and dry-wall partitions: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting with 4-point support and screw fixing. Clamp extension 5-33mm. Pre-drilled holes in the housing frame. Electronic transformer 230/240/12V. 2 cable entries. Through-wiring possible. 5-pole terminal block. Asymmetric reflector-lens system: aluminium, silver anodised. Optimised lamp screening ensures no direct light emission. Weight 4.16kg LMF E 5p krrIP65
m 2
0.80m f=1.00
0.5 2
Q 242 2666666 1
33377.000 Reflector silver QT12-ax-RE 50W 12V GY6.35 1250lm Temperature on the light aperture 56째C
Cover plate with sculpture lens as safety glass: corrosion-resistant cast aluminium, double powder-coated in graphit m. Optimised surface for reduced accumulation of dirt. Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water jet-proof. Accessories page 948
Q 258
466666663
1
10
0 1
148
46663
QT12-ax-RE
m 4
3
2
1
Lightmark Floor washlight for metal halide lamps Housing for recessed mounting in brickwork and dry-wall partitions: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting with 4-point support and screw fixing. Clamp extension 5-33mm. Pre-drilled holes in the housing frame. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Asymmetric reflector-lens system: aluminium, silver anodised. Optimised lamp screening ensures no direct light emission. Weight 4.20kg LMF E 5p krrIP65 Q 258
466666663
0.5 2
46663
HIT-TC-CE
466666663
3
2
1
0.5 2 10
46663
Weight 4.17kg LMF E 5p krrIP65
HIT-CE
m 8
6
4
0
Cover plate with sculpture lens as safety glass: corrosion-resistant cast aluminium, double powder-coated in graphit m. Optimised surface for reduced accumulation of dirt. Protection mode IP65: dust-proof and water jet-proof. Accessories page 948
Q 242 2666666 1 148 4666 3
2
2
0.80m f=1.00
Q 258 46666666 3
m 4
2
148
Housing for recessed mounting in brickwork and dry-wall partitions: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting with 4-point support and screw fixing. Clamp extension 5-33mm. Pre-drilled holes in the housing frame. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Asymmetric reflector-flood system: aluminium, silver, mirror-finish anodised. Anti-glare element: metal. No direct light emission.
www.erco.com
m 4 0.80m f=1.00
Q 258
33372.000 Reflector silver ECG HIT-TC-CE 35W G8.5 3900lm Temperature on the light aperture 52째C
0 1
148
Weight 4.28kg LMF E 5p krrIP65
1
10
Q 242 2666666 1
33370.000 Reflector silver ECG HIT-CE 35W G12 3900lm Temperature on the light aperture 52째C
m 2
0.80m f=1.00
Q 242 2666666 1
33376.000 Reflector silver ECG HIT-TC-CE 20W GU6.5 1800lm Temperature on the light aperture 40째C
Cover plate with sculpture lens as safety glass: corrosion-resistant cast aluminium, double powder-coated in graphit m. Optimised surface for reduced accumulation of dirt. Protection mode IP65: dust-proof and water jet-proof. Accessories page 948
0.5
5 20
m 8
6
2 0
1
HIT-TC-CE
m 4
4
2
2
ERCO Program 2012
947
Lightmark Floor washlight for compact fluorescent lamps Housing for recessed mounting in brickwork and dry-wall partitions: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting with 4-point support and screw fixing. Clamp extension 5-33mm. Pre-drilled holes in the housing frame. Electronic control gear. 2 cable entries. Through-wiring possible. 5-pole terminal block. Asymmetric reflector-lens system: aluminium, silver anodised. Optimised lamp screening ensures no direct light emission. Weight 4.19kg LMF E 5p krrIP65
m 2
0.80m f=1.00
0.5 2 10
Q 242 2666666 1
33374.000 Reflector silver ECG TC-DEL 18W G24q-2 1200lm Temperature on the light aperture 37°C
Cover plate with sculpture lens as safety glass: corrosion-resistant cast aluminium, double powder-coated in graphit m. Optimised surface for reduced accumulation of dirt. Protection mode IP65: dust-proof and water jet-proof. Accessories see below
Q 258
466666663
148
46663
1 0 1
TC-DEL
m 4
3
2
1
00 98
33
• • • • •
• • • • •
58 70 3 46666 3 4666
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
948
6.0
00 9.0
00 33
37
8.0 37 33
•
• • • • •
ERCO Program 2012
200 317 466 3 466666 3 251 4666 3
90 4666666 3 45 466 3
33370.000 33372.000 33374.000 33376.000 33377.000
83
82
9.0
00
Lightmark Accessories
20 66 364
Q 242 4666 3
33378.000 Concrete housing Metal, powder-coated. Recommended 0-8mm aggregate for the concrete. Weight 3.99kg
184
33379.000 Plaster frame Corrosion resistant stainless steel, white powdercoated. Weight 0.45kg
Q265
33986.000 Surface-mounted housing Corrosion-resistant aluminium, NoRinse surface treatment. Graphit m, double powder-coated. Weight 1.65kg
www.erco.com
Lightmark Façade luminaire for tungsten halogen lamps Luminaire housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Wall plate: cast aluminium. 2 cable entries. Through-wiring possible. 5-pole terminal block. Asymmetric reflector-lens system: aluminium, silver anodised. Optimised lamp screening ensures no direct light emission. Front lens top: spread lens as safety glass. Weight 3.00kg LMF E I5p krrIP65
200 115 3 46666 3 4666
33380.000 Graphit m QT-DE12-RE 120W 230V R7s L75mm 2300lm Housing temperature 99°C Temperature on the light aperture 103°C
254 4666666 3
150°
750 cd
120°
150°
120°
QT-DE12-RE
Luminaire housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Wall plate: cast aluminium. 2 cable entries. Through-wiring possible. 5-pole terminal block. Asymmetric reflector-lens system: aluminium, silver anodised. Optimised lamp screening ensures no direct light emission. Front lens top and bottom: spread lens as safety glass. Weight 4.20kg LMF E I5p krrIP65 254 4666666 3
Protection mode IP65: dust-proof and water jet-proof. Accessories page 950
120°
200 200 3 46666 3 46666
33386.000 Graphit m QT-DE12-RE 230W 230V R7s L114mm 5000lm Housing temperature 115°C Temperature on the light aperture 123°C
Protection mode IP65: dust-proof and water jet-proof. Accessories page 950
900 cd
60°
120°
60°
QT-DE12-RE
Lightmark Façade luminaire for metal halide lamps
33382.000 Graphit m ECG HIT-CE 35W G12 3900lm Housing temperature 49°C Temperature on the light aperture 53°C
Weight 3.40kg LMF E I5p krrIP65 254 4666666 3
www.erco.com
200 115 3 46666 3 4666
Luminaire housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Wall plate: cast aluminium. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Asymmetric reflector-lens system: aluminium, silver anodised. Optimised lamp screening ensures no direct light emission. Front lens top: spread lens as safety glass.
Protection mode IP65: dust-proof and water jet-proof. Accessories page 950
150°
120°
1250 cd
150°
120°
HIT-CE
ERCO Program 2012
949
Lightmark Façade luminaire for metal halide lamps Luminaire housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Wall plate: cast aluminium. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Asymmetric reflector-lens system: aluminium, silver anodised. Optimised lamp screening ensures no direct light emission. Front lens top and bottom: spread lens as safety glass. Weight 4.60kg LMF E 5p krrIP65 254 4666666 3
120°
200 200 3 46666 3 46666
33388.000 Graphit m ECG HIT-DE-CE 70W RX7s 6500lm Housing temperature 55°C Temperature on the light aperture 60°C
Protection mode IP65: dust-proof and water jet-proof.
60°
600 cd
120°
60°
HIT-DE-CE
• •
•
58 70 3 46666 3 4666
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
200 46666666 3
•
90 4666666 3 45 466 3
00 2.0 39
33
33380.000 33382.000 33386.000
83
82
9.0
00
Lightmark Accessories
200 115 46666666 3 4666 3
33392.000 Graphit m Cantilever Corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Aluminium cover for concealed wiring. Fixing screws for support frame. Weight 1.50kg
RDS Radio Dimensione Suono headquarter, Rome. Architect: Nigel Rayan. Lighting design: Baldieri, Rome.
950
ERCO Program 2012
www.erco.com
Cylinder Façade luminaires Cylinder façade luminaires produce striking light effects not only on the building frontage, but also as pathway lighting around access ways. The result: high visual comfort. The basic cylindrical shape with the square wall fixing contains the lighting technology that enables a narrow or wide beam emission directed upwards and downwards or only downwards for different light distribution patterns. The light beam is directed upwards with a slight incline towards the façade to achieve a grazing light effect and prevent light pollution. The high visual comfort of the downward beam results from the precise light distribution and the darklight reflector.
Washlighting Wide- beam illumination of pathways and open areas.
Floor washlights Asymmetrical washlighting with a wide beam for the illumination of pathways.
LED 6.7W - 13W 435lm - 1080lm Wide beam
Accentuation Emphasis of the façade produced by a narrow light beam.
Façade luminaires Asymmetrical light distribution for accentuated façade lighting.
LED 13W - 20W 870lm - 1620lm Low- voltage halogen lamps 50W - 100W 1200lm - 2200lm High- pressure discharge lamps 20W - 70W 1650lm - 7750lm
www.erco.com
ERCO Program 2012
951
Cylinder Façade luminaires
Spot/flood The spot characteristic produces a narrow beam, upward grazing light. The flood characteristic pointed downwards creates a wide beam, grazing light effect on the façade and pools the light in a semicircle on the ground.
Oval flood/ oval flood Changing the downward light emission to oval flood characteristic produces a wide beam grazing light with a beam edge ending just before the façade.
Oval flood/flood The oval flood characteristic produces a wide beam, upward grazing light. The slight inclination of the beam towards the façade conforms to the Dark Sky standard. The flood light distribution downwards generates a wide beam grazing light on the façade and pools the light in a semicircle on the ground.
Spot/oval flood The spot characteristic produces a narrow beam, upward grazing light. The oval flood characteristic generates a wide beam grazing light with a beam edge ending just before the façade.
Oval flood versions The downward beam oval flood characteristic is available in two versions for different applications.
Flood Wide beam grazing light on the façade with a semicircle on the ground.
952
ERCO Program 2012
Façade lighting The oval flood characteristic produces a wide beam grazing light with a beam edge ending just before the façade.
Floor washlights for pathway lighting Tilted at 10°, the oval flood characteristic produces an oblong beam on the ground to illuminate pathways in front of the façade.
www.erco.com
Cylinder Floor washlight with LED Housing: corrosion-resistant aluminium profile, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Tamper-proof screw. Cover and wall fixture: corrosion-resistant cast aluminium. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Front lens bottom: Reflector: aluminium, silver, bright anodised. Inclined
Size 2 30°
Weight 1.80kg LMF E Ip krrIP65
H=2m f=1.00
Weight 1.80kg LMF E Ip krrIP65
LED
m 4
3
2
1 0
1
H=2m f=1.00
1 5 20
180
188
m 2
1
d95 50
85105.000 Graphit m LED 6.7W 435lm 3000K warm white Version 1
1 5 20
180
188
85104.000 Graphit m LED 6.7W 540lm 4000K neutral white Version 1
oval flood Spherolit lens for pathway lighting. Lower non-reflective safety glass. Protection mode IP65: dust-proof and water jet-proof.
m 2 1 0 1
d95 50
LED
m 4
3
2
1
Cylinder Floor washlight and façade luminaire with LED Housing: corrosion-resistant aluminium profile, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Tamper-proof screw. Cover and wall fixture: corrosion-resistant cast aluminium. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Front lens top: Spherolit lens, spot. Upper non-reflective safety glass.
Size 2 30°
H=2m f=1.00
d95 50
m 4
3
2
m 2
1 5 20
m 4
3
2
1500 cd
120°
1 0 1
60°
m 2
120°
60°
1500 cd
120°
1 0 1
LED
120°
1
H=2m f=1.00
d95 50
www.erco.com
LED
180
Weight 1.90kg LMF E Ip krrIP65
195
85114.000 Graphit m LED 13W 870lm 3000K warm white Version 1
1 5 20
180
Weight 1.90kg LMF E Ip krrIP65
195
85115.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1
Front lens bottom: Reflector: aluminium, silver, bright anodised. Inclined oval flood Spherolit lens for pathway lighting. Lower non-reflective safety glass. Protection mode IP65: dust-proof and water jet-proof.
60°
60°
1
ERCO Program 2012
953
Cylinder Floor washlight and façade luminaire with LED Housing: corrosion-resistant aluminium profile, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Tamper-proof screw. Cover and wall fixture: corrosion-resistant cast aluminium. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Front lens top: Spherolit lens, oval flood. Upper non-reflective safety glass.
Size 2 30°
Weight 1.90kg LMF E Ip krrIP65
H=2m f=1.00
d95 50
Weight 1.90kg LMF E Ip krrIP65
LED
m 4
3
2
1 5 20
180
m 2
LED
m 4
3
1500 cd
120°
1 0 1
60°
m 2
120°
60°
2
1500 cd
120°
1 0 1
d95 50
120°
1
H=2m f=1.00
195
85112.000 Graphit m LED 13W 870lm 3000K warm white Version 1
1 5 20
180
195
85113.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1
Front lens bottom: Reflector: aluminium, silver, bright anodised. Inclined oval flood Spherolit lens for pathway lighting. Lower non-reflective safety glass. Protection mode IP65: dust-proof and water jet-proof.
60°
60°
1
Cylinder Façade luminaire with LED Housing: corrosion-resistant aluminium profile, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Tamper-proof screw. Cover and wall fixture: corrosion-resistant cast aluminium. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Front lens top: Spherolit lens, spot. Upper non-reflective safety glass.
Size 2 30°
120°
60°
d95 50
ERCO Program 2012
60°
LED 120°
d95 50
954
120°
1500 cd
120°
180
Weight 1.90kg LMF E Ip krrIP65
195
85110.000 Graphit m LED 13W 870lm 3000K warm white Version 1
1500 cd
180
Weight 1.90kg LMF E Ip krrIP65
195
85111.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1
Front lens bottom: Reflector: aluminium, silver, bright anodised. Spherolit lens, oval flood. Lower non-reflective safety glass. Protection mode IP65: dust-proof and water jet-proof.
60°
60°
LED
www.erco.com
Cylinder Façade luminaire with LED Housing: corrosion-resistant aluminium profile, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Tamper-proof screw. Cover and wall fixture: corrosion-resistant cast aluminium. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Front lens top: Spherolit lens, oval flood. Upper non-reflective safety glass.
Size 2 30°
Weight 1.90kg LMF E Ip krrIP65
60°
d95 50
Weight 1.90kg LMF E Ip krrIP65
180 d122 50
LED
d122 50
30°
60°
1250 cd
30°
1000 cd
120°
60°
60°
LED 1000 cd
120°
150 d122 50
www.erco.com
1250 cd
aluminium, silver, bright anodised. Luminaire cut-off angle 30°. Diffuser: glass, frosted. Cover ring with non-reflective safety glass: corrosion-resistant cast aluminium, double powder-coated. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof.
120° 175
Weight 2.40kg LMF E Ip krrIP65
30°
120°
d122 50
85103.000 Graphit m LED 20W 1305lm 3000K warm white Version 1
30°
60°
150
Weight 2.40kg LMF E Ip krrIP65
175
85102.000 Graphit m LED 20W 1620lm 4000K neutral white Version 1
LED
Housing and wall fixture: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Optimised surface for reduced accumulation of dirt. Tamper-proof screw. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Front lens top: Spherolit lens, spot. Upper non-reflective safety glass. Front lens bottom: Darklight reflector:
Size 3 30°
Luminaire cut-off angle 30°. Diffuser: glass, frosted. Cover ring with non-reflective safety glass: corrosion-resistant cast aluminium, double powder-coated. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof.
60°
150
Weight 2.30kg LMF E Ip krrIP65
163
85101.000 Graphit m LED 13W 870lm 3000K warm white Version 1
120°
60°
60°
150
Weight 2.30kg LMF E Ip krrIP65
1500 cd
LED
Housing and wall fixture: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Optimised surface for reduced accumulation of dirt. Tamper-proof screw. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Front lens bottom: Darklight reflector: aluminium, silver, bright anodised.
163
85100.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1
60°
60°
d95 50
Size 3 30°
120°
LED 120°
195
85108.000 Graphit m LED 13W 870lm 3000K warm white Version 1
1500 cd
180
120° 195
85109.000 Graphit m LED 13W 1080lm 4000K neutral white Version 1
Front lens bottom: Reflector: aluminium, silver, bright anodised. Spherolit lens, oval flood. Lower non-reflective safety glass. Protection mode IP65: dust-proof and water jet-proof.
60°
60°
LED
ERCO Program 2012
955
Cylinder Façade luminaire with LED Housing and wall fixture: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Optimised surface for reduced accumulation of dirt. Tamper-proof screw. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Front lens top: Spherolit lens, oval flood. Upper non-reflective safety glass. Front lens bottom: Darklight reflector:
Size 3 30°
Weight 2.40kg LMF E Ip krrIP65
120°
60°
d122 50
Weight 2.40kg LMF E Ip krrIP65
120°
60°
LED 120°
1000 cd
120°
150
175
85107.000 Graphit m LED 20W 1305lm 3000K warm white Version 1
1000 cd
150
175
85106.000 Graphit m LED 20W 1620lm 4000K neutral white Version 1
aluminium, silver, bright anodised. Luminaire cut-off angle 30°. Diffuser: glass, frosted. Cover ring with non-reflective safety glass: corrosion-resistant cast aluminium, double powder-coated. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof.
60°
d122 50
60°
LED
Cylinder Façade luminaire for low-voltage halogen lamps Housing and wall fixture: corrosion-res- Accessories page 959 istant cast aluminium, No-rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Housing removable for lamp replacement. Tamper-proof screw. 2 Cable entries. Through-wiring possible. 3-pole terminal block. 230/12V, 35-50VA safety transformer. Front lens bottom: Reflector: aluminium, silver, bright anodised. Softec lens. Lower safety glass. Protection mode IP65: dust-proof and water jet-proof.
Size 2 30°
h(m) 60°
140
Weight 2.50kg LMF E I56p krrIP65
150
85022.000 Graphit m QR-CBC51-RE 50W 12V GU5.3 10° QR-CBC51-RE 50W 12V GU5.3 60°
d95 50
QR-CBC51-RE
30°
60°
15000 cd
30°
1 2 3 4 5 h(m)
60°
QR-CBC51-RE
956
ERCO Program 2012
30°
60°
1750 cd
30°
1 2 3 4 5
E(lx) D(m) 10° 12000 0.17 3000 0.35 1333 0.52 750 0.70 480 0.87 E(lx) 1144 286 127 71 46
D(m) 60° 1.15 2.31 3.46 4.62 5.77
www.erco.com
Cylinder Façade luminaire for low-voltage halogen lamps Housing and wall fixture: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Housing removable for lamp replacement. Tamper-proof screw. 2 Cable entries. Through-wiring possible. 3-pole terminal block. 230/12V, 50-70VA safety transformer. Reflectors: aluminium, silver, bright anodised. Softec lenses. Upper and lower safety glass. Protection mode IP65: dust-proof and water jet-proof. Accessories page 959
Size 2 30°
Weight 2.90kg LMF E 56p krrIP65
120°
8000 cd
120°
175
195
85023.000 Graphit m 2xQR-CBC51 35W 12V GU5.3 10° 2xQR-CBC51 35W 12V GU5.3 60°
60°
d95 50
60°
2xQR-CBC51 120°
800 cd
60°
120°
60°
2xQR-CBC51
Housing and wall fixture: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Optimised surface for reduced accumulation of dirt. 2 Cable entries. Through-wiring possible. 3-pole terminal block. 230/12V, 75-100VA safety transformer. Front lens top: Vario-lens, adjustable, 3 levels, 8°, 15°, 30°. Upper safety glass. Front lens bottom: Darklight reflector: aluminium, silver, bright anodised. Luminaire cut-off angle 30°. Diffuser: glass, frosted. Cover ring with safety glass: corro-
Size 3 30°
E(lx)
1 2 3 4 5
6671 1668 741 417 267
h(m)
E(lx)
1 2 3 4 5
583 146 65 36 23
D(m) 10° 0.17 0.35 0.52 0.70 0.87 D(m) 60° 1.15 2.31 3.46 4.62 5.77
sion-resistant cast aluminium, double powder-coated. Remove complete with darklight reflector to replace lamp. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof. Accessories page 959
120°
1500 cd
120°
150
Weight 3.80kg LMF E 56p krrIP65
175
85024.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm
h(m)
d122 50
60°
60°
QT12-ax 120°
1500 cd
60°
120°
60°
QT12-ax 120°
60°
1500 cd
120°
60°
QT12-ax
www.erco.com
ERCO Program 2012
957
Cylinder Façade luminaire for metal halide lamps Housing and wall fixture: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Optimised surface for reduced accumulation of dirt. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. Front lens top: Vario-lens, adjustable, 3 levels, 8°, 15°, 30°. Upper safety glass. Front lens bottom: Darklight reflector: aluminium, silver, bright anodised. Luminaire cut-off angle 30°. Diffuser: glass, frosted. Cover ring with safety glass: corro-
Size 3 30°
120°
1000 cd
120°
150
Weight 2.55kg LMF E 56p krrIP65
175
85026.000 Graphit m ECG HIT-TC-CE 20W PGJ5 1650lm
sion-resistant cast aluminium, double powder-coated. Remove complete with darklight reflector to replace lamp. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof.
d122 50
60°
60°
HIT-TC-CE 120°
1000 cd
60°
120°
60°
HIT-TC-CE 120°
60°
1000 cd
120°
60°
HIT-TC-CE
Werratal-Therme, Bad Sooden-Allendorf. Architect: Geier + Geier Freie Architekten, Stuttgart. Lighting designer: Facit Lichttechnik, Lemgo.
958
ERCO Program 2012
www.erco.com
Cylinder Façade luminaire for metal halide lamps Housing and wall fixture: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Optimised surface for reduced accumulation of dirt. 2 Cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. Front lens top: Vario-lens, adjustable, 3 levels, 8°, 15°, 30°. Upper safety glass. Front lens bottom: Darklight reflector: aluminium, silver, bright anodised. Luminaire cut-off angle 30°. Diffuser: glass, frosted. Cover ring with safety glass: corro-
Size 5 30°
Weight 4.80kg LMF E I56p krrIP65
120°
3000 cd
120°
188
213
85029.000 Graphit m ECG HIT-CE 35W G12 3900lm
sion-resistant cast aluminium, double powder-coated. Remove complete with darklight reflector to replace lamp. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof.
d180
60°
60
60°
HIT-CE 120°
3000 cd
60°
120°
60°
HIT-CE 120°
3000 cd
60°
120°
60°
HIT-CE
Weight 4.80kg LMF E 56p krrIP65
120°
6000 cd
120°
188
213
85028.000 Graphit m ECG HIT-CE 70W G12 7750lm
d180
60
60°
60°
HIT-CE 120°
6000 cd
60°
120°
60°
HIT-CE 120°
60°
6000 cd
120°
60°
HIT-CE
85022.000 85023.000 85024.000
• • •
90 4666666 3 45 466 3
83
82 9.0 00
Cylinder Accessories
58 70 3 46666 3 4666
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
www.erco.com
ERCO Program 2012
959
Focalflood Façade luminaires The grazing light of the Focalflood façade luminaires brings out the surface texture of buildings at night. The narrow beam light distribution over the whole wall avoids unnecessary light pollution. The wide light distribution in the other direction ensures good uniformity on the façade and when mounted in a row, wide luminaire spacing. The two mounting brackets ensure easy adjustment to the tilt of the luminaire.
Façade luminaires Asymmetrical light distribution for accentuated façade lighting.
Accentuation Emphasis of the façade produced by a narrow light beam.
LED 22W 1450lm - 1800lm LED varychrome 24W Optional: DALI, varychrome
Hotel Intercontinental Paris Avenue Marceau, Paris.
960
ERCO Program 2012
www.erco.com
Focalflood Faรงade luminaires
When mounted in a row along the building, the broad light distribution and its even gradient ensure uniform faรงade illumination.
527 530
0.8 510
80 555
60
0.6 500
40
575 20
0.4
600
W 490
20
20
40
60
80
622 780
40
0.2 480
60 80
465
380 0.2
0.4
0.6
0.8
The Focalflood luminaire has a very narrow beam angle towards the wall and a wide light distribution along the wall, allowing the light to graze a wide area without producing any spill light.
In addition to the neutral white colour temperature, the range now also features a warm white version in order that the light colour corresponds more closely to the material colour.
Like other lamps, high- power LEDs generate heat. To prevent the luminous flux and life of the lamp from decreasing drastically, the maximum junction temperature must not be exceeded even during continuous operation. ERCO places particular importance on heat management in its luminaires to ensure that the LED modules remain below the critical temperature range and operate at full output through-
out their lives. Mounting the LED module directly on metal- core PCBs effectively dissipates the heat to the luminaire housing. Extensive simulations and tests in the development phase ensure the success of the production procedures used.
Coloured LEDs have high saturation and therefore allow a large number of mixed colours to be produced. The line from the central white point to the RGB points serves as a scale for saturation. The numeric values on the outer edge of the curve indicate the wavelength.
The DALI- compatible luminaires have digital control gear which allows each luminaire to be individually addressed, for example by using the ERCO
www.erco.com
Light System DALI with integral ERCO Light Studio soft ware.
ERCO Program 2012
961
Focalflood Façade luminaire with LED Housing: corrosion-resistant aluminium profile, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Screw-fastened end plates: corrosion-resistant cast aluminium. Two mounting brackets for positioning as required: corrosion-resistant aluminium. 135° tilt. Electronic control gear. Cable, 3x1mm2 , L 1.5m. LED module. Axially symmetrical reflector lens system: aluminium, silver anodised. Optimised LED screening ensures no direct Weight 3.20kg LMF E 5p krrIP65
633 159 666666666666666666 4 3 46666666 3 89 4666 3
200–590 64666666666666666 3
Weight 3.20kg LMF E 5p krrIP65
5000 cd
120°
150°
120°
LED
633 159 666666666666666666 4 3 46666666 3 89 4666 3
150°
84 4666 3
34170.000 Graphit m LED 22W 1450lm 3000K warm white Version 4 Maximum wind load area 0.05m2
150°
84 4666 3
34172.000 Graphit m LED 22W 1800lm 4000K neutral white Version 4 Maximum wind load area 0.05m2
light emission. Front section with Softec lens: corrosion-resistant aluminium, double powder-coated. Protection mode IP65: dust-proof and water jet-proof.
200–590 64666666666666666 3
5000 cd
120°
150°
120°
LED
Focalflood Façade luminaire RGB varychrome with LED
34171.000 Graphit m DALI LED 24W 750lm red, green, blue Version 2 Colour compensation for precise light colour. Maximum wind load area 0.05m2
Weight 3.20kg LMF E krrIP65
633 159 466666666666666666 3 46666666 3 89 46663
200–590 4666666666666666 3
Primary colours LED module Colour F(lm) l(nm) Red 270 620-625 Green 360 525-530 Blue 120 465-470
962
ERCO Program 2012
tem: aluminium, silver anodised. Optimised LED screening ensures no direct light emission. Front section with Softec lens: corrosion-resistant aluminium, double powder-coated. Protection mode IP65: dust-proof and water jet-proof.
150°
84 4666 3
DALI PLUG+ PLAY
Housing: corrosion-resistant aluminium profile, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Screw-fastened end plates: corrosion-resistant cast aluminium. Two mounting brackets for positioning as required: corrosion-resistant aluminium. 135° tilt. Cable, 5x1.5mm2 , L 1.5m. DALI control gear, with plug and play connectivity for ERCO RGB varychrome colour mixing. LED module. Axially symmetrical reflector lens sys-
120°
1500 cd
150°
120°
LED
S(%) 99 77 97
www.erco.com
Site Faรงade luminaires The Site range of luminaires is designed for use as orientation and pathway lighting on buildings. Their round form and functional design make the faรงade luminaire a sleek architectural detail at entrances and faรงades. Impact- resistant plastic and the additional protective grid provide vandal protection. The diffuse light emission means that this source of direct lighting can be used both on ceiling and walls. The special lighting control, produced by the half- covered, wallmounted version, provides good visual comfort and directs light to the floor.
Washlighting Wide- beam illumination of the faรงade and ground.
Wall- mounted luminaires Asymmetrical light distribution for ground and wall illumination.
Compact fluorescent lamps 18W - 42W 1200lm - 3200lm
General lighting Ambient lighting produced by wide beam light distribution.
Ceiling/wall- mounted luminaires Wide beam, rotationally symmetrical light distribution for orientation and diffuse general lighting.
Compact fluorescent lamps 18W - 42W 1200lm - 3200lm
www.erco.com
ERCO Program 2012
963
Site Wall-mounted luminaire for compact fluorescent lamps Housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. Reflector: metal, white (RAL9010) powder-coated. Cover: impact-resistant plastic, clear, half painted silver light-proof. Screw-fastened cover ring with protective grid: corrosion-resistant cast aluminium, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. 44568.000 Graphit m ECG 44519.000 Silver m ECG TC-DEL 18W G24q-2 1200lm
Weight 1.65kg LMF E 76p krrIP65
m 4
1.60m f=1.00
1 20
119 466 3
∅ 235 4666666 3
5
TC-DEL
m 8
6
4
2 0 2
2
Housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. Reflector: metal, white (RAL9010) powder-coated. Cover: impact-resistant plastic, clear, half painted silver light-proof. Screw-fastened cover ring with protective grid: corrosion-resistant cast aluminium, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. 44569.000 Graphit m ECG 44536.000 Silver m ECG TC-TEL 26W GX24q-3 1800lm
Weight 2.60kg LMF E 76p krrIP65
1.60m f=1.00
1 2
5 20
m 4 2 0
131 46666 3
∅ 280 4666666666 3
2
TC-TEL
m 8
6
4
2
Housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. Reflector: metal, white (RAL9010) powder-coated. Cover: impact-resistant plastic, clear, half painted silver light-proof. Screw-fastened cover ring with protective grid: corrosion-resistant cast aluminium, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. 44570.000 Graphit m ECG 44549.000 Silver m ECG TC-TEL 42W GX24q-4 3200lm
Weight 3.50kg LMF E 76p krrIP65
1.60m f=1.00
1
ERCO Program 2012
2
m 4 2 0
143 46666 3
964
5 20
∅ 330 4 6666666666 3
2
TC-TEL
m 8
6
4
2
www.erco.com
Site Ceiling/wall-mounted luminaire for compact fluorescent lamps Housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. Reflector: metal, white (RAL9010) powder-coated. Cover: impact-resistant plastic, white. Screw-fastened cover ring with protective grid: corrosion-resistant cast aluminium, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. 44571.000 Graphit m ECG 44518.000 Silver m ECG TC-DEL 18W G24q-2 1200lm
Weight 1.65kg LMF E 76p krrIP65 119 466 3
Connected load 44571.000 P: 44518.000 P:
∅ 235 4666666 3
TC-DEL
Connected load per 100lx 44571.000 P*: 6.17 W/m2 44518.000 P*: 6.17 W/m2
18 W 18 W
Number of luminaires per 100lx 44571.000 n*: 34.28 1/100m2 44518.000 n*: 34.28 1/100m2
Housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. Reflector: metal, white (RAL9010) powder-coated. Cover: impact-resistant plastic, white. Screw-fastened cover ring with protective grid: corrosion-resistant cast aluminium, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. 44572.000 Graphit m ECG 44527.000 Silver m ECG TC-TEL 32W GX24q-3 2400lm
Weight 2.60kg LMF E 76p krrIP65 131 46666 3
Connected load 44572.000 P: 44527.000 P:
∅ 280 4666666666 3
TC-TEL
Connected load per 100lx 44572.000 P*: 5.19 W/m2 44527.000 P*: 5.19 W/m2
35 W 35 W
Number of luminaires per 100lx 44572.000 n*: 14.82 1/100m2 44527.000 n*: 14.82 1/100m2
Housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. Reflector: metal, white (RAL9010) powder-coated. Cover: impact-resistant plastic, white. Screw-fastened cover ring with protective grid: corrosion-resistant cast aluminium, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. 44563.000 Graphit m ECG 44548.000 Silver m ECG TC-TEL 42W GX24q-4 3200lm
Weight 3.45kg LMF E 76p krrIP65 143 46666 3
Connected load 44563.000 P: 44548.000 P:
www.erco.com
45 W 45 W
∅ 330 4 6666666666 3
TC-TEL
Connected load per 100lx 44563.000 P*: 3.93 W/m2 44548.000 P*: 3.93 W/m2
Number of luminaires per 100lx 44563.000 n*: 8.73 1/100m2 44548.000 n*: 8.73 1/100m2
ERCO Program 2012
965
Site Ceiling/wall-mounted luminaire for compact fluorescent lamps Housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. Reflector: metal, white (RAL9010) powder-coated. Cover: impact-resistant plastic, white. Screw-fastened cover ring: corrosion-resistant cast aluminium, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. 44564.000 Graphit m ECG 44517.000 Silver m ECG TC-DEL 18W G24q-2 1200lm
Weight 1.50kg LMF E 76p krrIP65
4100 663
Connected load 44564.000 P: 44517.000 P:
∅ 235 4666666 3
TC-DEL
Connected load per 100lx 44564.000 P*: 5.31 W/m2 44517.000 P*: 5.31 W/m2
18 W 18 W
Number of luminaires per 100lx 44564.000 n*: 29.50 1/100m2 44517.000 n*: 29.50 1/100m2
Housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. Reflector: metal, white (RAL9010) powder-coated. Cover: impact-resistant plastic, white. Screw-fastened cover ring: corrosion-resistant cast aluminium, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. 44565.000 Graphit m ECG 44523.000 Silver m ECG TC-TEL 32W GX24q-3 2400lm
Weight 2.30kg LMF E 76p krrIP65 110 4666 3
Connected load 44565.000 P: 44523.000 P:
∅ 280 4666666666 3
TC-TEL
Connected load per 100lx 44565.000 P*: 4.43 W/m2 44523.000 P*: 4.43 W/m2
35 W 35 W
Number of luminaires per 100lx 44565.000 n*: 12.66 1/100m2 44523.000 n*: 12.66 1/100m2
Housing: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powder-coated. 2 cable entries. Through-wiring possible. 3-pole terminal block. Electronic control gear. Reflector: metal, white (RAL9010) powder-coated. Cover: impact-resistant plastic, white. Screw-fastened cover ring: corrosion-resistant cast aluminium, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. 44567.000 Graphit m ECG 44547.000 Silver m ECG TC-TEL 42W GX24q-4 3200lm
Weight 3.10kg LMF E 76p krrIP65 120 4666 3
Connected load 44567.000 P: 44547.000 P:
966
ERCO Program 2012
45 W 45 W
∅ 330 4666666666 3
TC-TEL
Connected load per 100lx 44567.000 P*: 3.45 W/m2 44547.000 P*: 3.45 W/m2
Number of luminaires per 100lx 44567.000 n*: 7.66 1/100m2 44547.000 n*: 7.66 1/100m2
www.erco.com
Bollard luminaires Buildings and their surroundings require a range of lighting solutions for the various tasks from the functional lighting of pathways, stairs or open areas to the dramatic lighting of facades. Luminaire ranges with different but predominantly widebeam, asymmetric light distributions can be used to solve these problems. Each range of products with a uniform design providing the lighting designer with a choice mounting and luminaire position options. Irrespective of the functional principle of the lighting technology, priority is always given to key Dark Sky features as well as the prevention of glare and of unnecessary spill light.
Visor
Low-voltage halogen lamps High-pressure discharge lamps Fluorescent lamps
Midipoll
LED High-pressure discharge lamps
974 975
Panorama
Low-voltage halogen lamps High-pressure discharge lamps
980 981
Lightmark
Tungsten halogen lamps High-pressure discharge lamps Fluorescent lamps
www.erco.com
970 970 970
987 987 988
989
ERCO Program 2012
967
Visor Bollard luminaires The common design feature of the Visor open area luminaires is a semi- circular cover glass. As a light source, the bollard luminaires are discreet and provide high visual comfort. They ensure glare- free light for passers- by or road users, as they emit almost no light above the horizontal. Only an unobtrusive refraction of light from the lens indicates that the light source is actually on. Depending on the lighting technology, these bollard luminaires produce wide beams of light which are ideal for lighting pathways, or beams that penetrate deep into an area, which are effective in illuminating open spaces such as public squares or terraces.
Floor washlights Asymmetrical washlighting with a wide or deep beam for the illumination of pathways or squares.
Washlighting Wide- beam illumination of pathways and open areas.
Low- voltage halogen lamps 50W 1250lm Deep beam High- pressure discharge lamps 35W 3900lm Deep beam Fluorescent lamps 10W - 18W 600lm - 1200lm Wide beam
Fundaci贸n Banco Santander Central Hispano, Madrid. Architect and lighting designer: Kevin Roche John Dinkeloo and Associates, Dublin.
968
ERCO Program 2012
www.erco.com
Visor Bollard luminaires Floor washlights for pathway lighting In pathway luminaires, the lamp is hidden from the direct view of observers from all positions resulting in good visual comfort. The lens spreads the width of the beam.
2m
0.5 lx
2 lx
20 lx
0m
45째
z
Floor washlights for open area lighting In contrast to the pathway luminaires with their wide light distribution, the open area luminaires direct light up to approximately 8m away. The lamps themselves are shielded by a vertically suspended anti- glare element.
1 lx
0.5 lx 2m
5 lx
20 lx
0m
10째
10째
z
www.erco.com
ERCO Program 2012
969
Visor Bollard luminaire Floor washlight for low-voltage halogen lamps Housing: corrosion-resistant aluminium, No-Rinse surface treatment. Double powder-coated. Removable front section with integral floor washlight. Optimised surface for reduced accumulation of dirt. Base plate for mounting on concrete plinth or accessories: corrosion-resistant aluminium. Floor washlight: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Safety transformer, 230/12V. Throughwiring possible. 5-pole terminal block. Asymmetric reflector system: aluWeight 9.20kg LMF E I56p mrrIP55 130 260 3666 4 4666 3
m 4
0.55m f=1.00
690 4666666666 3
33312.000 Graphit m QT12-ax-RE 50W 12V GY6.35 1250lm Housing temperature 85°C Temperature on the light aperture 90°C
minium, silver anodised, mirror-finish. Anti-glare element: metal. No direct light emission. Screw-fastened cover with sculpture lens as safety glass: corrosion resistant stainless steel. Protection mode IP55: dust-proof and water jet-proof. Accessories page 971
2 10
0 2
0.5
QT12-ax-RE
m 8
6
4
2
2
Visor Bollard luminaire Floor washlight for metal halide lamps Housing: corrosion-resistant aluminium, No-Rinse surface treatment. Double powder-coated. Removable front section with integral floor washlight. Optimised surface for reduced accumulation of dirt. Base plate for mounting on concrete plinth or accessories: corrosion-resistant aluminium. Floor washlight: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Through-wiring possible. 5-pole terminal block. Electronic control gear. Asymmetric reflector system: aluWeight 11.20kg LMF E I56p mrrIP55 160 310 3 3666 4 4666
m 4
0.65m f=1.00
810 466666666666 3
33314.000 Graphit m ECG HIT-TC-CE 35W G8.5 3900lm Housing temperature 60°C Temperature on the light aperture 60°C
minium, silver anodised, mirror-finish. Anti-glare element: metal. No direct light emission. Screw-fastened cover with sculpture lens as safety glass: corrosion resistant stainless steel. Protection mode IP55: dust-proof and water jet-proof. Accessories page 971
5
1
20
0 0.5
HIT-TC-CE
m 8
6
2
4
2
2
Visor Bollard luminaire Floor washlight for compact fluorescent lamps Housing: corrosion-resistant aluminium, No-Rinse surface treatment. Double powder-coated. Removable front section with integral floor washlight. Optimised surface for reduced accumulation of dirt. Base plate for mounting on concrete plinth or accessories: corrosion-resistant aluminium. Floor washlight: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Electronic control gear. Through-wiring possible. 5-pole terminal block. Weight 8.20kg LMF E I56p mrrIP55 130 260 36664 46663
970
ERCO Program 2012
m 2
0.55m f=1.00
690 4 6666666666 3
33311.000 Graphit m ECG TC-DEL 10W G24q-1 600lm Housing temperature 40°C Temperature on the light aperture 40°C
Asymmetric reflector system: aluminium, silver, satin matt anodised. Screw-fastened cover with sculpture lens as safety glass: corrosion resistant stainless steel. Protection mode IP55: dust-proof and water jet-proof. Accessories page 971
0.5 2 20
1 0 1
TC-DEL
m 4
3
2
1
www.erco.com
Visor Bollard luminaire Floor washlight for compact fluorescent lamps Housing: corrosion-resistant aluminium, No-Rinse surface treatment. Double powder-coated. Removable front section with integral floor washlight. Optimised surface for reduced accumulation of dirt. Base plate for mounting on concrete plinth or accessories: corrosion-resistant aluminium. Floor washlight: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Electronic control gear. Through-wiring possible. 5-pole terminal block. Weight 11.30kg LMF E I56p mrrIP55 160 310 3 3666 4 4666
m 2
0.65m f=1.00
810 46666666666 3
33313.000 Graphit m ECG TC-DEL 18W G24q-2 1200lm Housing temperature 40°C Temperature on the light aperture 40°C
Asymmetric reflector system: aluminium, silver, satin matt anodised. Screw-fastened cover with sculpture lens as safety glass: corrosion resistant stainless steel. Protection mode IP55: dust-proof and water jet-proof. Accessories see below
0.5
2 20
1 0 1
TC-DEL
m 4
3
2
1
00 0.0
00
• • • •
• • • •
• • • •
• • • •
• • • •
65 3666 4
58 70 3 46666 3 4666
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
62 3666 4
75 36666 4
160 466666 3
65 3666 4
34964.000 Cable junction box Plastic, black. Terminal block 2 of 5x2.5mm2 . 1 fuse D01 E14 10A. Weight 0.25kg
34965.000 Cable junction box Plastic, grey. Terminal block 2 of 5x6mm2 . 1 fuse D01 E14 10A. Weight 0.55kg
260 4666666666 3
33
98
33
97
5.0
00 4.0
00 97 34
96
5.0
00 4.0 96
34
•
90 4666666 3 45 466 3
33311.000 33312.000 33313.000 33314.000
34
83
82
9.0
00
Visor Accessories
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
∅ 83
d 124 4 6663 200 466666 3
502 6466666666 3
3664 6666
∅ 60
6663664
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
www.erco.com
33980.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.30kg
ERCO Program 2012
971
Midipoll Bollard luminaires The Midipoll bollard luminaire not only offers effective illumination of areas or paths, but also makes its presence known in a subtle fashion. It is therefore used both during the day and at night as a defining element whilst providing orientation. The Dark Sky technology shields pedestrians and drivers from glare and prevents spill light from being emitted above the horizontal. The Midipoll emits light downwards and spreads it widely across the ground. The cross- shaped aluminium profile – elegantly formed of four parabolas – emits grazing light gently and connects the cylindrical luminaire head with the base.
Floor washlights Rotationally symmetrical washlighting penetrating deep into an area to illuminate open spaces.
Washlighting Wide- beam illumination of pathways and open areas.
LED 9W 580lm - 720lm Optional: DALI High- pressure discharge lamps 20W - 35W 1800lm - 3900lm
Hotel Santa Marta, Lloret de Mar. Architect: Carles Sobirà, Lloret de Mar.
972
ERCO Program 2012
www.erco.com
Midipoll Bollard luminaires The Midipoll luminaire not only casts light on the surrounding floor area, but also on itself. The discreet grazing light on the distinct cross-shaped profile creates its own focal point to act as a space-defining element. The balanced component of grazing light and the optimal shielding of the lamp thus guarantee excellent night time visual comfort. The optional choices are efficient lamps such as LEDs and high-pressure discharge lamps. Using the long life LEDs makes the luminaire practically maintenance-free.
The front lens of the bollard luminaire is concealed from passers-by. Together with spreading light on the ground, the lens illuminates the cross-
shaped aluminium profile making it a discreet attraction.
The Midipoll bollard luminaire for LEDs is available with a specifically designed plastic prism lens.
The light of the high-power LEDs emitted vertically downwards is refracted by both the top and bottom sides of the lens, resulting in
a wide-beam light distribution on the ground.
Horizon line The Midipoll can be mounted using various accessories: concrete anchor, ground socket or mounting plate. The double cable entry in the mounting plate enables efficient through-wiring.
Dark Sky technology ensures that, in the interest of both the environment and people, the light is only projected where it is required. Dark Sky compatible luminaires such as Midipoll bollards have a precise light guidance system and a defined cutoff angle for optimum visual comfort. A crucial consideration for bollard luminaires is to ensure that no light is emitted above the horizontal plane. www.erco.com
ERCO Program 2012
973
Midipoll Bollard luminaire Floor washlight with LED For mounting on accessories. Cross-shaped aluminium profile and cylindrical housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Cylindrical luminaire head with lower
33334.000 Graphit m LED 9W 580lm 3000K warm white Version 3 Maximum wind load area 0.1m2 Housing temperature 46°C Temperature on the light aperture 37°C
974
ERCO Program 2012
m 2
1
0
0 1
1
m 2
0.5
1
120 3664 6∅666
Weight 4.80kg LMF E 5p krrIP65
LED
0.70m f=1.00
800 4666666666666 3
Weight 4.80kg LMF E 5p krrIP65
20 2
120 3664 6∅666
0
20 2
LED
For mounting on accessories. Cross-shaped aluminium profile and cylindrical housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. DALI control gear, with plug and play connectivity. 2 cable entries. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Cylindrical luminaire head with lower
800 4666666666666 3
33316.000 Graphit m DALI LED 9W 580lm 3000K warm white Version 3 Maximum wind load area 0.1m2 Housing temperature 46°C Temperature on the light aperture 37°C
1
120 3664 6∅666
DALI PLUG+ PLAY
33317.000 Graphit m DALI LED 9W 720lm 4000K neutral white Version 3 Maximum wind load area 0.1m2 Housing temperature 46°C Temperature on the light aperture 37°C
0.5
120 3664 6∅666
Weight 4.80kg LMF E I5p krrIP65
m 2
0.70m f=1.00
800 4666666666666 3
Weight 4.80kg LMF E I5p krrIP65
800 4666666666666 3
33344.000 Graphit m LED 9W 720lm 4000K neutral white Version 3 Maximum wind load area 0.1m2 Housing temperature 46°C Temperature on the light aperture 37°C
prismatic lens: corrosion-resistant cast aluminium, double powder-coated. Mounting accessories to be ordered separately. Protection mode IP65: dust-proof and water jet-proof. Accessories page 977
m 2
1
0
1 1
prismatic lens: corrosion-resistant cast aluminium, double powder-coated. Mounting accessories to be ordered separately. Protection mode IP65: dust-proof and water jet-proof. Accessories page 977
m 2
0.70m f=1.00
0.5
1 20 2
LED
m 2
1
0
0 1
1
m 2
0.70m f=1.00
0.5
1 0
20 2
LED
m 2
1
0
1 1
www.erco.com
Midipoll Bollard luminaire Floor washlight for metal halide lamps For mounting on accessories. Cross-shaped aluminium profile and cylindrical housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. Upper reflector: aluminium, silver anodised. Cylindrical luminaire head with lower flood lens: corrosion-resistant cast aluminium, double powder-coated. ReWeight 4.80kg LMF E I5p krrIP65
0.70m f=1.00
800 4666666666666 3
33338.000 Graphit m ECG HIT-TC-CE 20W G8.5 1800lm Maximum wind load area 0.1m2 Housing temperature 49°C Temperature on the light aperture 57°C
0.5
m 4
2
2
2
0
2 m 4
0.70m f=1.00
800 4666666666666 3
Weight 4.80kg LMF E I5p krrIP65
HIT-TC-CE
m 4
0
20
2
120 3664 6∅666
33342.000 Graphit m ECG HIT-TC-CE 35W G8.5 3900lm Maximum wind load area 0.1m2 Housing temperature 66°C Temperature on the light aperture 76°C
moved from base for lamp replacement. Screw fixing. Mounting accessories to be ordered separately. Protection mode IP65: dust-proof and water jet-proof. Accessories page 977
0.5
2
120 3664 6∅666
20 2
HIT-TC-CE
m 4
2
0
0 2
2
Midipoll Bollard luminaire Floor washlight with LED For mounting on accessories. Cross-shaped aluminium profile and cylindrical housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Cylindrical luminaire head with lower
33333.000 Graphit m LED 9W 580lm 3000K warm white Version 3 Maximum wind load area 0.06m2 Housing temperature 46°C Temperature on the light aperture 37°C
www.erco.com
0.42m f=1.00
525 46666666 3
Weight 3.30kg LMF E I5p krrIP65
0.5
Weight 3.30kg LMF E I5p krrIP65
LED
m 2
1
0
1
m 2 0.5
m 2
1
1 0
20 2
∅ 120
LED
1
1
0.42m f=1.00
3664 6666
m 2
0
20 2
∅ 120
3664 6666
525 46666666 3
33343.000 Graphit m LED 9W 720lm 4000K neutral white Version 3 Maximum wind load area 0.06m2 Housing temperature 46°C Temperature on the light aperture 37°C
prismatic lens: corrosion-resistant cast aluminium, double powder-coated. Mounting accessories to be ordered separately. Protection mode IP65: dust-proof and water jet-proof. Accessories page 977
1 0
1
ERCO Program 2012
975
Midipoll Bollard luminaire Floor washlight with LED For mounting on accessories. Cross-shaped aluminium profile and cylindrical housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. DALI control gear, with plug and play connectivity. 2 cable entries. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. Cylindrical luminaire head with lower
DALI PLUG+ PLAY
33318.000 Graphit m DALI LED 9W 580lm 3000K warm white Version 3 Maximum wind load area 0.06m2 Housing temperature 46°C Temperature on the light aperture 37°C
0.42m f=1.00
525 46666666 3
Weight 3.30kg LMF E 5p krrIP65
0.5
120 3664 6∅666
Weight 3.30kg LMF E 5p krrIP65
2
LED
m 2
1
1
m 2 0.5
m 2
1
1 0
2
LED
1
1
0
20
120 3664 6∅666
m 2
0
20
0.42m f=1.00
525 46666666 3
33319.000 Graphit m DALI LED 9W 720lm 4000K neutral white Version 3 Maximum wind load area 0.06m2 Housing temperature 46°C Temperature on the light aperture 37°C
prismatic lens: corrosion-resistant cast aluminium, double powder-coated. Mounting accessories to be ordered separately. Protection mode IP65: dust-proof and water jet-proof. Accessories page 977
1 0
1
Midipoll Bollard luminaire Floor washlight for metal halide lamps For mounting on accessories. Cross-shaped aluminium profile and cylindrical housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. Electronic control gear. 2 cable entries. Through-wiring possible. 3-pole terminal block. Upper reflector: aluminium, silver anodised. Cylindrical luminaire head with lower flood lens: corrosion-resistant cast aluminium, double powder-coated. Lu-
33339.000 Graphit m ECG HIT-TC-CE 35W G8.5 3900lm Maximum wind load area 0.06m2 Housing temperature 66°C Temperature on the light aperture 76°C
976
ERCO Program 2012
2 20 2 0.5
∅ 120
3664 6666
Weight 3.30kg LMF E I5p krrIP65
m 4
0.42m f=1.00
525 46666666 3
Weight 3.30kg LMF E I5p krrIP65
HIT-TC-CE
m 4
2
0
0 2 2 m 4
0.42m f=1.00
525 46666666 3
33337.000 Graphit m ECG HIT-TC-CE 20W G8.5 1800lm Maximum wind load area 0.06m2 Housing temperature 49°C Temperature on the light aperture 57°C
minaire housing is removed from base for lamp replacement. Screw fixing. Mounting accessories to be ordered separately. Protection mode IP65: dust-proof and water jet-proof. Accessories page 977
2 20 2 0.5
∅ 120
3664 6666
HIT-TC-CE
m 4
2
0
0 2
2
www.erco.com
502 6466666666 3
• • • • • • • • • • • •
• • • • • • • • • • • •
• • • • • • • • • • • •
∅ 60
6663664
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
33980.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.30kg
d 260 46666666 3
• • • • • • • • • • • •
d 124 4 6663 200 466666 3
00
3664 6666
2 .0
00
∅ 83
98 33
98
0 .0
00 5 .0
33
97 33
33316.000 33317.000 33318.000 33319.000 33333.000 33334.000 33337.000 33338.000 33339.000 33342.000 33343.000 33344.000
34
97
4 .0
00
Midipoll Accessories
24 66 3664
33982.000 Mounting plate Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 1.70kg
Private residence, Espergærde. Architect: Dall Lindhardtsen, Helsingør. Electrical engineering: OGC Building Consultants, Bagsværd.
www.erco.com
ERCO Program 2012
977
Panorama Bollard luminaires The cylindrical Panorama bollard luminaires with Dark Sky technology are used to illuminate open areas with particularly high visual comfort. Their innovative lighting technology combines the highest precision and efficiency in a surprisingly small luminaire. The system, with the parabolic and cone reflectors, emits light throughout a full 360째 up to 6m deep over the area to be illuminated. In this way, the Dark Sky technology shields pedestrians and drivers superbly from glare and avoids spill light emitted above the horizontal. The concealed light source of Panorama bollard luminaires is merely revealed by the almost magical shimmering of the light aperture.
Floor washlights Rotationally symmetrical washlighting penetrating deep into an area to illuminate open spaces.
Washlighting Wide- beam illumination of pathways and open areas.
Low- voltage halogen lamps 50W - 100W 1250lm - 2200lm High- pressure discharge lamps 20W - 70W 1800lm - 7750lm
RDS Radio Dimensione Suono headquarters, Rome. Architect: Nigel Ryan. Lighting design: Baldieri, Rome.
978
ERCO Program 2012
www.erco.com
Panorama Bollard luminaires Dark Sky technology ensures that the light is only projected where it is supposed to go â&#x20AC;&#x201C; in the interest of both the environment and people. Dark Sky compatible luminaires such as the Panorama bollards have a precise light guidance system and a defined cut- off angle for optimum visual comfort. A crucial consideration for outdoor luminaires is to ensure that no light is emitted above the horizontal plane. Low luminance of the cover glass avoids excessive luminance contrasts in the outdoor area at night.
Horizon line
The Panorama bollard luminaires produce an exception ally wide circular light distribution. The gentle gradient of the beam and the low luminance of the cover glass improve our perception by avoiding significant contrasts which would require visual adaptation time.
4m 2m 0 m 0.5 lx
5 lx
20 lx
Light distribution The 900mm high Panorama bollard luminaire is particularly suitable for the illumination of wide areas. A beam diameter of up to 12m with an outer illuminance of 0.5lx makes it a powerful tool for outdoor lighting.
Light distribution The lower, 450mm version of the Panorama bollard luminaire is intended for applications where a smaller area is to be illuminated and the luminaire is to be less conspicuous as in green spaces.
www.erco.com
ERCO Program 2012
979
Panorama Bollard luminaire Floor washlight for low-voltage halogen lamps Aluminium tube: double powdercoated. Upper cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. double powder-coated. Optimised surface for reduced accumulation of dirt. Base plate for mounting on concrete plinth or accessories. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic transformer 230/240/12V. Internal parabolic reflector: aluminium, silver, mirror-finish anodised. Anti-glare cap: metal. Anti-glare screen: metal, black. 360° conical Darklight reflector: aluminium, silver, mirror-finish anodised. Glare-free above the light aperture. Glass cylinder as lamp cover. Luminaire housing is removed from base for lamp replacement. Tamper-proof screws. Weight 5.30kg LMF E I5p krrIP65
0.75m f=1.00
800 46666666666 3
33345.000 Graphit m QT12-ax-RE 50W 12V GY6.35 1250lm Maximum wind load area 0.11m2 Housing temperature 45°C Temperature on the light aperture 48°C
0.5
QT12-ax-RE
Weight 8.30kg LMF E I5p krrIP65
900 4 666666666666 3
Aluminium tube: double powdercoated. Upper cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. double powder-coated. Optimised surface for reduced accumulation of dirt. Base plate for mounting on concrete plinth or accessories. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic transformer 230/240/12V. Internal parabolic reflector: aluminium, silver, mirror-finish anodised. Anti-glare cap: metal. Anti-glare screen: metal, black. 360° conical Darklight reflector: aluminium, silver, mirror-finish anodised. Glare-free above the light aperture. Glass cylinder as lamp cover. Luminaire housing is removed from base for lamp replacement. Tamper-proof screws.
m 4
2
2
Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water jet-proof. Accessories page 983
0.5
5
10 m 4
2
0
m 4 2 0
10
QT12-ax
2
2 0
0.85m f=1.00
466 666666 3 ∅ 205
m 4
0
20
10
∅ 132 43 66666
33349.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm Maximum wind load area 0.19m2 Housing temperature 53°C Temperature on the light aperture 55°C
Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water jet-proof. Accessories page 983
2 2
Wiesbadener Volksbank Private Banking, Wiesbaden. Lighting design: Arne Fiedler, Wiesbaden.
980
ERCO Program 2012
www.erco.com
Panorama Bollard luminaire Floor washlight for metal halide lamps Aluminium tube: double powdercoated. Upper cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. double powder-coated. Optimised surface for reduced accumulation of dirt. Base plate for mounting on concrete plinth or accessories. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Internal parabolic reflector: aluminium, silver, mirror-finish anodised. Anti-glare screen: metal, black. Weight 5.50kg LMF E I5p krrIP65
0.75m f=1.00
800 46666666666 3
33359.000 Graphit m ECG HIT-TC-CE 20W GU6.5 1800lm Maximum wind load area 0.11m2 Housing temperature 37°C Temperature on the light aperture 38°C
0.5
10
∅ 132 43 66666
Weight 5.50kg LMF E I5p krrIP65
HIT-TC-CE
www.erco.com
Weight 8.80kg LMF E I5p krrIP65
900 4 666666666666 3 900 4 666666666666 3
33353.000 Graphit m ECG HIT-CE 70W G12 7750lm Maximum wind load area 0.19m2 Housing temperature 57°C Temperature on the light aperture 60°C
2
10
HIT-CE
m 4
2
0
20
2 0 2
360° conical Darklight reflector: aluminium, silver, mirror-finish anodised. Glare-free above the light aperture. Glass cylinder as lamp cover. Luminaire housing is removed from base for lamp replacement. Tamper-proof screws. Protection mode IP65: dust-proof and water jet-proof. Accessories page 983
0.5
10 2
HIT-CE
m 4
2
0.85m f=1.00
466 666666 3 ∅ 205
2
2 0
20
Aluminium tube: double powdercoated. Upper cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. double powder-coated. Optimised surface for reduced accumulation of dirt. Base plate for mounting on concrete plinth or accessories. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Internal parabolic reflector: aluminium, silver, mirror-finish anodised. Anti-glare screen: metal, black. Weight 8.80kg LMF E I5p krrIP65
2
0.5
∅ 132 43 66666
33351.000 Graphit m ECG HIT-CE 35W G12 3900lm Maximum wind load area 0.19m2 Housing temperature 50°C Temperature on the light aperture 47°C
m 4
m 4
0
20
0.75m f=1.00
800 46666666666 3
33347.000 Graphit m ECG HIT-CE 35W G12 3900lm Maximum wind load area 0.11m2 Housing temperature 50°C Temperature on the light aperture 47°C
360° conical Darklight reflector: aluminium, silver, mirror-finish anodised. Glare-free above the light aperture. Glass cylinder as lamp cover. Luminaire housing is removed from base for lamp replacement. Tamper-proof screws. Protection mode IP65: dust-proof and water jet-proof. Accessories page 983
m 6
3
0
m 6 3 0 3
3 m 6
0.85m f=1.00
0.5
3
466 666666 3 ∅ 205
20 5
HIT-CE
m 6
3
0
0 3
3
ERCO Program 2012
981
Panorama Bollard luminaire Floor washlight for low-voltage halogen lamps Aluminium tube: double powdercoated. Upper cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. double powder-coated. Optimised surface for reduced accumulation of dirt. Base plate for mounting on concrete plinth or accessories. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic transformer 230/240/12V. Internal parabolic reflector: aluminium, silver, mirror-finish anodised. Anti-glare cap: metal. Anti-glare screen: metal, black. 360° conical Darklight reflector: aluminium, silver, mirror-finish anodised. Glare-free above the light aperture. Glass cylinder as lamp cover. Luminaire housing is removed from base for lamp replacement. Tamper-proof screws. Weight 5.70kg LMF E I5p krrIP65
m 4
0.40m f=1.00
450 466666 3
33355.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm Maximum wind load area 0.09m2 Housing temperature 53°C Temperature on the light aperture 55°C
Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water jet-proof. Accessories page 983
2
∅ 205 46636666
20 0.5
QT12-ax
m 4
2
0
2 0 2
2
Panorama Bollard luminaire Floor washlight for metal halide lamps Aluminium tube: double powdercoated. Upper cover: corrosion-resistant cast aluminium, No-Rinse surface treatment. double powder-coated. Optimised surface for reduced accumulation of dirt. Base plate for mounting on concrete plinth or accessories. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Internal parabolic reflector: aluminium, silver, mirror-finish anodised. Anti-glare screen: metal, black. Weight 6.10kg LMF E I5p krrIP65
0.40m f=1.00
450 466666 3
33357.000 Graphit m ECG HIT-CE 35W G12 3900lm Maximum wind load area 0.09m2 Housing temperature 50°C Temperature on the light aperture 47°C
360° conical Darklight reflector: aluminium, silver, mirror-finish anodised. Glare-free above the light aperture. Glass cylinder as lamp cover. Luminaire housing is removed from base for lamp replacement. Tamper-proof screws. Protection mode IP65: dust-proof and water jet-proof. Accessories page 983
0.5
∅ 205 46636666
20 2
HIT-CE
m 4
2
0
m 4 2 0 2
2
Harbour, Hjo. Architect: Hjo Kommun Stadsbyggnad & Miljö. Lighting design: White Design AB, Gothenburg.
982
ERCO Program 2012
www.erco.com
00 2 .0
00
• •
• •
•
•
•
58 70 3 46666 3 4666
200
4666663
d 124 4 6663
33980.000 Concrete anchor Mounting plates with threaded bar and fixing screws. Individual parts to be assembled on-site. Weight 0.30kg
∅ 83
3664 6666
∅ 60
∅ 60 666 3664
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
33974.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 2.30kg
6663664
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
d 260 46666666 3
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
∅ 115 36664 6666
502 6466666666 3
• •
600 466666666 3
98 33
98
0 .0
00 5 .0
00 97
97
33
•
• • • • •
33
•
4 .0
00 4 .0
• • • • • • • •
33
97 34
•
90 4666666 3 45 466 3
33345.000 33347.000 33349.000 33351.000 33353.000 33355.000 33357.000 33359.000
83
82
9 .0
00
Panorama Accessories
24 66 3664
33982.000 Mounting plate Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 1.70kg
COR Interlübke works exhibition, Rheda-Wiedenbrück. Architect: Kräling+Lübke, Hamburg. Lighting consultant: LDE Kober, Dortmund.
www.erco.com
ERCO Program 2012
983
Lightmark Bollard luminaires Features of the rectangular Lightmark bollard luminaires include asymmetrical light emission and effective anti- glare protection. The Dark Sky technology maximises visual comfort and prevents light from being emitted above the horizontal. Depending on the version, Lightmark bollard luminaires produce a wide beam of light which is ideal for lighting pathways, or a beam that penetrates deep into an area, which is effective in illuminating open spaces such as public squares or terraces. The Lightmark faรงade floodlights are suitable for uniform illumination of exterior faรงades.
Washlighting Wide- beam illumination of pathways and open areas.
Floor washlights Asymmetrical washlighting with a wide or deep beam for the illumination of pathways or squares.
Tungsten halogen lamps 120W 2300lm Wide beam High- pressure discharge lamps 35W 3900lm Wide beam, deep beam Fluorescent lamps 18W 1200lm Wide beam
Wallwashing Vertical illuminance for brightening the surroundings and dividing the outside.
984
ERCO Program 2012
Faรงade floodlights Asymmetrical light distribution for highly uniform faรงade illumination.
High- pressure discharge lamps 35W - 70W 3900lm - 6500lm
www.erco.com
Lightmark Bollard luminaires Lightmark bollard luminaires with their wide light distribution patterns allow a variety of applications for efficient open area and faรงade lighting. The system design with two heights includes lighting for driveways, pathways and squares, while its precise lighting technology meets the requirements of Dark Sky.
Floor washlights for pathway lighting In pathway luminaires, the lamp is hidden from the direct view of observers from all positions resulting in good visual comfort. The spread lens extends the beam so that paths can be uniformly lit along their length.
2m
0,5 lx 2 lx 10 lx
www.erco.com
0m
The soft- edged beam creates a pleasant transition from bright to darker surroundings. The gentle gradient of the beam improves perception, as the eye requires less adaptation between significant contrasts.
ERCO Program 2012
985
Lightmark Bollard luminaires Floor washlights for open area lighting In contrast to the pathway luminaires with their wide light distribution, the open area luminaires with sculpture lenses direct light far forward. The lamps themselves are shielded by a vertically suspended anti- glare element.
2m
0,5 lx
1 lx
5 lx 20 lx
0m
Faรงade washing Faรงade floodlights produce a wide and very uniform illumination of vertical surfaces through their asymmetric reflector. All luminaires feature robust castaluminium housings and are rated IP65.
986
ERCO Program 2012
www.erco.com
Lightmark Bollard luminaire Floor washlight for tungsten halogen lamps
33450.000 Graphit m QT-DE12-RE 120W 230V R7s L75mm 2300lm Maximum wind load area 0.18m2 Housing temperature 82°C Temperature on the light aperture 86°C
Weight 8.20kg LMF E I5p krrIP65
900 466666666666 3
Bollard: aluminium profile, No-Rinse surface treatment. Double powdercoated. Base plate for mounting on concrete plinth or accessories: cast aluminium. Luminaire housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. 2 cable entries. Through-wiring possible. 5-pole terminal block. Asymmetric reflector-lens system: aluminium, silver anodised. Optimised
lamp screening ensures no direct light emission. Spread lens as safety glass. Luminaire housing is removed from base for lamp replacement. Tamperproof screws. Protection mode IP65: dust-proof and water jet-proof. Accessories page 989
0.80m f=1.00
0.5 2 10
200 43 66 66666
36666666 4115
m 4 2 0 2
QT-DE12-RE
m 8
6
4
2
Lightmark Bollard luminaire Floor washlight for metal halide lamps
33453.000 Graphit m ECG HIT-CE 35W G12 3900lm Maximum wind load area 0.18m2 Housing temperature 44°C Temperature on the light aperture 45°C
Weight 8.60kg LMF E I5p krrIP65
900 466666666666 3
Bollard: aluminium profile, No-Rinse surface treatment. Double powdercoated. Base plate for mounting on concrete plinth or accessories: cast aluminium. Luminaire housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Asymmetric reflector-lens system: aluminium, silver anodised. Optimised
0.80m f=1.00
0.5 2 10
200 43 66 66666
36666666 4115
6
4
115 3666466
2 0
2
element: metal. No direct light emission. Sculpture lens as safety glass. Luminaire housing is removed from base for lamp replacement. Tamperproof screws. Protection mode IP65: dust-proof and water jet-proof. Accessories page 989
0.5
5 20
200 43 6666
www.erco.com
m 8
0.80m f=1.00
900 46666666666 3
Weight 8.60kg LMF E I5p krrIP65
m 4
2
HIT-CE
Bollard: aluminium profile, No-Rinse surface treatment. Double powdercoated. Base plate for mounting on concrete plinth or accessories: cast aluminium. Luminaire housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Asymmetric reflector-flood system: aluminium, silver anodised. Anti-glare 33460.000 Graphit m ECG HIT-TC-CE 35W G8.5 3900lm Maximum wind load area 0.18m2 Housing temperature 43°C Temperature on the light aperture 71°C
lamp screening ensures no direct light emission. Spread lens as safety glass. Luminaire housing is removed from base for lamp replacement. Tamperproof screws. Protection mode IP65: dust-proof and water jet-proof. Accessories page 989
m 8
6
2 0
1
HIT-TC-CE
m 4
4
2
2
ERCO Program 2012
987
Lightmark Bollard luminaire Floor washlight for compact fluorescent lamps
33451.000 Graphit m ECG TC-DEL 18W G24q-2 1200lm Maximum wind load area 0.18m2 Housing temperature 33°C Temperature on the light aperture 33°C
Weight 8.40kg LMF E 5p krrIP65
900 466666666666 3
Bollard: aluminium profile, No-Rinse surface treatment. Double powdercoated. Base plate for mounting on concrete plinth or accessories: cast aluminium. Luminaire housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Asymmetric reflector-lens system: aluminium, silver anodised. Optimised
lamp screening ensures no direct light emission. Spread lens as safety glass. Luminaire housing is removed from base for lamp replacement. Tamperproof screws. Protection mode IP65: dust-proof and water jet-proof. Accessories page 989
m 2
0.80m f=1.00
0.5 2 10
200 43 66 66666
36666666 4115
1 0 1
TC-DEL
m 4
3
2
1
Lightmark Bollard luminaire Floor washlight for tungsten halogen lamps Bollard: aluminium profile, No-Rinse surface treatment. Double powdercoated. Base plate for mounting on concrete plinth or accessories: cast aluminium. Luminaire housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. 2 cable entries. Through-wiring possible. 5-pole terminal block. Asymmetric reflector-lens system: aluminium, silver anodised. Optimised Weight 5.70kg LMF E I5p krrIP65
m 2
0.35m f=1.00
0.5
450 466666 3
33466.000 Graphit m QT-DE12-RE 120W 230V R7s L75mm 2300lm Maximum wind load area 0.09m2 Housing temperature 82°C Temperature on the light aperture 86°C
lamp screening ensures no direct light emission. Spread lens as safety glass. Luminaire housing is removed from base for lamp replacement. Tamperproof screws. Protection mode IP65: dust-proof and water jet-proof. Accessories page 989
466666 3 200
2
115 36664 666
10
1 50
0 1
QT-DE12-RE
m 4
3
2
1
Lightmark Bollard luminaire Floor washlight for metal halide lamps Bollard: aluminium profile, No-Rinse surface treatment. Double powdercoated. Base plate for mounting on concrete plinth or accessories: cast aluminium. Luminaire housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Asymmetric reflector-lens system: aluminium, silver anodised. Optimised Weight 6.10kg LMF E I5p krrIP65
0.35m f=1.00
0.5 2 10
450 466666 3
33467.000 Graphit m ECG HIT-CE 35W G12 3900lm Maximum wind load area 0.09m2 Housing temperature 44°C Temperature on the light aperture 45°C
466666 3 200
115 36664 666
ERCO Program 2012
m 2 1 0 1
HIT-CE
988
lamp screening ensures no direct light emission. Spread lens as safety glass. Luminaire housing is removed from base for lamp replacement. Tamperproof screws. Protection mode IP65: dust-proof and water jet-proof. Accessories page 989
m 4
3
2
1
www.erco.com
Lightmark Bollard luminaire Façade floodlight for metal halide lamps Bollard: aluminium profile, No-Rinse surface treatment. Double powdercoated. Base plate for mounting on concrete plinth or accessories: cast aluminium. Luminaire housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated. Optimised surface for reduced accumulation of dirt. 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Reflector: aluminium, silver anodised. Without spill light. Safety glass. Weight 8.60kg LMF E I5p krrIP65
135°
900 46666666666 3
33462.000 Graphit m ECG HIT-CE 35W G12 3900lm Maximum wind load area 0.18m2 Housing temperature 38°C Temperature on the light aperture 55°C
200 43 66666
Weight 8.60kg LMF E I5p krrIP65
3666666 4115
105°
135°
200 43 66666
3666666 4115
2000 cd
HIT-CE
900 46666666666 3
33464.000 Graphit m ECG HIT-DE-CE 70W RX7s 6500lm Maximum wind load area 0.18m2 Housing temperature 46°C Temperature on the light aperture 75°C
Luminaire housing is removed from base for lamp replacement. Tamperproof screws. Protection mode IP65: dust-proof and water jet-proof. Accessories see below
3000 cd
105°
HIT-DE-CE
3664 6666
00
• • • • • • • •
• • • • • • • •
502 6466666666 3
90 4666666 3 45 466 3
97
•
•
∅ 83
5.0
00 4.0
33
97 34
33450.000 33451.000 33453.000 33460.000 33462.000 33464.000 33466.000 33467.000
83
82
9.0
00
Lightmark Accessories
58 70 3 46666 3 4666
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
∅ 60
6663664
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
33975.000 Ground socket Metal, hot-dip galvanised. Cable entry. Weight 1.75kg
RDS Radio Dimensione Suono, Rome. Architect: Nigel Rayan., Rome. Lighting design: Baldieri, Rome.
www.erco.com
ERCO Program 2012
989
Recessed luminaires Buildings and their surroundings require a range of lighting solutions for the various tasks from the functional lighting of pathways, stairs or open areas to the dramatic lighting of facades. Luminaire ranges with different but predominantly widebeam, asymmetric light distributions can be used to solve these problems. Each range of products with a uniform design providing the lighting designer with a choice mounting and luminaire position options. Irrespective of the functional principle of the lighting technology, priority is always given to key Dark Sky features as well as the prevention of glare and of unnecessary spill light.
Lightcast
Paratec
990
LED Low-voltage halogen lamps PAR lamps High-pressure discharge lamps Fluorescent lamps
Tungsten halogen lamps High-pressure discharge lamps
ERCO Program 2012
994 995 996 996 997
998
999 1000 1001 1001
999
1005 1006
www.erco.com
Lightcast Recessed luminaires The Lightcast recessed luminaires for general and accent lighting have cast aluminium housings. The Darklight technology combines the maximum visual comfort with the maximum light output ratio. The recessed luminaires, with high protection ratings, are suitable for transitional areas between indoors and outdoors, such as entrance zones and arcades. In indoor areas where protection against moisture or dust is required, they ensure highquality lighting even in demanding conditions.
General lighting Ambient lighting produced by wide beam light distribution.
Downlights Wide beam, rotationally symmetrical light distribution for general lighting.
LED 13W - 27W 870lm - 2160lm Size 3, 5 Optional: DALI Low- voltage halogen lamps 35W - 100W 900lm - 2200lm Size 3, 5 PAR lamps 100W 1300lm Size 5 High- pressure discharge lamps 20W - 70W 1650lm - 7750lm Size 3, 5 Fluorescent lamps 18W 1200lm Size 5
Wallwashing Vertical illuminance for brightening and dividing the space.
Lens wallwashers Asymmetrical light distribution for highly uniform wallwashing.
LED 27W 1740lm - 2160lm Size 5 Optional: DALI High- pressure discharge lamps 35W - 70W 3900lm - 7750lm Size 5
www.erco.com
ERCO Program 2012
991
Lightcast Recessed luminaires Accentuation Emphasis of objects or architectural elements produced by a narrow beam.
Directional luminaires Very narrow to very wide beam, rotationally symmetrical light distribution for accent lighting.
LED 20W 1305lm - 1620lm Size 5 Spot Optional: DALI Low- voltage halogen lamps 35W - 100W 900lm - 2200lm Size 3, 5 Spot PAR lamps 100W 1300lm Size 5 High- pressure discharge lamps 35W - 70W 3900lm - 7750lm Size 5 Spot
992
ERCO Program 2012
www.erco.com
Lightcast Recessed luminaires
The downlights produce a widebeam light distribution for ambient lighting, e.g. for entrances or passages.
The lens wallwasher produces an asymmetrical light distribution for uniform illumination of vertical surfaces.
The sculpture lens fitted in the directional luminaire changes the circular beam to an oval. This means that a linear arrangement can produce a band of light on the ground. If directed onto the wall, the light distribution can
produce a wallwashing effect.
The narrow beam angle of the directional luminaires is ideal both for highlighting architectural details and accenting objects. The lampholder carrier can be tilted by up to 20째.
www.erco.com
ERCO Program 2012
993
Lightcast Downlight with LED Housing: cast aluminium, silver powder-coated. Mounting with 2-point support and screw fixing, for ceiling thicknesses of 1-30mm. Side-mounted control gear: plastic, black. Electronic control gear. Two cable entries. Through-wiring possible. 5pole terminal block. LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Diffuser: glass, frosted.
Size 3 30°
Weight 1.35kg LMF E 0qp krrIP65
d125 266666 1
60°
160 4666666 3
81032.000 Reflector silver LED 13W 1080lm 4000K neutral white Version 2
d139 4666666 3
Weight 1.35kg LMF E 0qp krrIP65
d125 266666 1
DALI PLUG+ PLAY
Weight 1.35kg LMF E 0qp krrIP65
d125 266666 1 160 4666666 3
Weight 1.35kg LMF E 0qp krrIP65
994
ERCO Program 2012
Weight 2.60kg LMF E I0qp krrIP65
160 4666666 3
LED
Housing: cast aluminium, silver powder-coated. Mounting with 3point support and screw fixing, for ceiling thicknesses of 1-30mm. Sidemounted control gear: cast aluminium, powder-coated black. Electronic control gear. Two cable entries. Through-wiring possible. 5pole terminal block. LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Darklight reflector: aluminium, silver,
220 4666666666 3 220 4666666666 3
81038.000 Reflector silver LED 27W 1740lm 3000K warm white Version 2
Weight 2.60kg LMF E I0qp krrIP65
30°
800 cd
E(lx)
1 2 3 4 5
516 129 57 32 21
h(m)
E(lx)
1 2 3 4 5
416 104 46 26 17
LED
30°
60°
800 cd
30°
30°
60°
800 cd
D(m) 67° 1.32 2.65 3.97 5.30 6.62
30°
h(m)
E(lx)
1 2 3 4 5
516 129 57 32 21
h(m)
E(lx)
1 2 3 4 5
416 104 46 26 17
D(m) 67° 1.32 2.65 3.97 5.30 6.62 D(m) 67° 1.32 2.65 3.97 5.30 6.62
bright anodised. Cut-off angle 30°. Diffuser: glass, frosted. Screw-fastened cover ring with safety glass: corrosion-resistant cast aluminium, No-Rinse surface treatment. Silver, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1002
30°
60°
1800 cd
30°
1 2 3 4 5 h(m)
60°
LED
D(m) 67° 1.32 2.65 3.97 5.30 6.62
bright anodised. Cut-off angle 30°. Diffuser: glass, frosted. Screw-fastened cover ring with safety glass: corrosion-resistant cast aluminium, No-Rinse surface treatment. Silver, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1002
60°
d 185 266666666 1
4666666666 666666 3 d 201
30°
h(m)
h(m)
d 185 266666666 1
4666666666 666666 3 d 201
30°
60°
60°
d139 4666666 3
81036.000 Reflector silver LED 27W 2160lm 4000K neutral white Version 2
LED
d125 266666 1
Size 5 30°
800 cd
60°
d139 4666666 3
81035.000 Reflector silver DALI LED 13W 870lm 3000K warm white Version 2
LED
Housing: cast aluminium, silver powder-coated. Mounting with 2-point support and screw fixing, for ceiling thicknesses of 1-30mm. Side-mounted control gear: plastic, black. DALI control gear, with plug and play connectivity. Two cable entries. Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Darklight reflector: aluminium, silver,
Size 3 30°
30°
60°
60°
d139 4666666 3
81033.000 Reflector silver DALI LED 13W 1080lm 4000K neutral white Version 2
LED
160 4666666 3
81034.000 Reflector silver LED 13W 870lm 3000K warm white Version 2
Screw-fastened cover ring with safety glass: corrosion-resistant cast aluminium, No-Rinse surface treatment. Silver, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1002
30°
60°
1800 cd
30°
1 2 3 4 5
E(lx) 1409 352 157 88 56 E(lx) 1135 284 126 71 45
D(m) 57° 1.09 2.17 3.26 4.34 5.43 D(m) 57° 1.09 2.17 3.26 4.34 5.43
www.erco.com
Lightcast Downlight with LED Housing: cast aluminium, silver powder-coated. Mounting with 3point support and screw fixing, for ceiling thicknesses of 1-30mm. Sidemounted control gear: cast aluminium, powder-coated black. DALI control gear, with plug and play connectivity. Two cable entries. Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Darklight reflector: aluminium, silver,
Size 5 30° DALI PLUG+ PLAY
81039.000 Reflector silver DALI LED 27W 1740lm 3000K warm white Version 2
220 4666666666 3
Weight 2.60kg LMF E 0qp krrIP65
Weight 2.60kg LMF E 0qp krrIP65
220 4666666666 3
81037.000 Reflector silver DALI LED 27W 2160lm 4000K neutral white Version 2
h(m)
d 185 266666666 1
4666666666 666666 3 d 201
60°
LED
30°
60°
1800 cd
30°
1 2 3 4 5 h(m)
d 185 266666666 1
4666666666 666666 3 d 201
bright anodised. Cut-off angle 30°. Diffuser: glass, frosted. Screw-fastened cover ring with safety glass: corrosion-resistant cast aluminium, No-Rinse surface treatment. Silver, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1002
60°
LED
30°
60°
1800 cd
30°
1 2 3 4 5
E(lx) 1409 352 157 88 56 E(lx) 1135 284 126 71 45
D(m) 57° 1.09 2.17 3.26 4.34 5.43 D(m) 57° 1.09 2.17 3.26 4.34 5.43
Lightcast Downlight for low-voltage halogen lamps Housing: cast aluminium, silver powder-coated. Mounting with 2-point support and screw fixing, for ceiling thicknesses 1-30mm. Side-mounted control gear: plastic, black. Electronic transformer 230/12V. 2 cable entries. Through-wiring possible. 4-pole terminal block. Screw-fastened cover ring with safety glass: corrosion-resistant, cast aluminium, No-rinse surface treatment. Silver double powder-coated. To be removed together with Darklight reflector for lamp replacement.
Size 3 30°
Weight 1.20kg LMF E I0q6p i krrIP65
∅ 125 266666 1 60°
160 4666666 3
81012.000 Reflector silver QT12-ax-RE 50W 12V GY6.35 1250lm Diffuser: glass, frosted.
∅ 139 4666666 3
Weight 1.20kg LMF E I0q6p i krrIP65
QT12-ax-RE
30°
60°
1250 cd
30°
60°
∅ 139 4666666 3
h(m)
E(lx)
1 2 3 4 5
892 223 99 56 36
h(m)
∅ 125 266666 1 160 4666666 3
81010.000 Reflector silver QR-CBC51-RE 35W 12V GU5.3 10° QR-CBC51-RE 35W 12V GU5.3 60°
Darklight reflector: aluminium, bright anodised. Cut-off angle 30°. Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water-jet proof. Accessories page 1002
QR-CBC51-RE
30°
60°
15000 cd
30°
1 2 3 4 5 h(m)
60°
QR-CBC51-RE
www.erco.com
30°
60°
2000 cd
30°
1 2 3 4 5
D(m) 55° 1.04 2.08 3.12 4.16 5.21
E(lx) D(m) 10° 11363 0.17 2841 0.35 1263 0.52 710 0.70 455 0.87 E(lx) 1000 250 111 62 40
ERCO Program 2012
D(m) 60° 1.15 2.31 3.46 4.62 5.77
995
Lightcast Downlight for low-voltage halogen lamps Housing: cast aluminium, silver powder-coated. Mounting with 3-point support and screw fixing, for ceiling thicknesses 1-30mm. Side-mounted control gear: plastic, black. Electronic transformer 230/12V. 2 cable entries. Through-wiring possible. 4-pole terminal block. Darklight reflector: aluminium, bright anodised. Cut-off angle 30°. Diffuser: glass, frosted. Screw-fastened cover ring with safety glass: corrosion-resistant, cast aluminium, No-rinse surface treatment. Silver double powder-coated. To be re-
Size 5 30°
Weight 2.20kg LMF E I0q6p i krrIP65
220 4 6666666666 3
81020.000 Reflector silver QT12-ax 100W 12V GY6.35 2200lm
moved together with Darklight reflector for lamp replacement. Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water-jet proof. Accessories page 1002
h(m)
∅ 185 266666666 1 60°
4666666666 6666666 3 ∅ 201
QT12-ax
30°
60°
4500 cd
30°
1 2 3 4 5
E(lx) 3588 897 399 224 144
D(m) 26° 0.46 0.92 1.39 1.85 2.31
Lightcast Downlight for PAR lamps Housing: cast aluminium, silver powder-coated. Mounting with 3-point support and screw fixing, for ceiling thicknesses of 1-30mm. Side-mounted control gear: plastic, black. 2 cable entries. Through-wiring possible. 5-pole terminal block. Darklight reflector: aluminium, bright anodised. Cut-off angle 30°. Screw-fastened cover ring with safety glass: corrosion-resistant, cast aluminium, No-rinse surface treatment. Silver double powder-coated. To be removed together with Darklight reflector for lamp replacement.
Size 5 30°
Weight 2.20kg LMF E I0q8p krrIP65
220 4666666666 3
81026.000 Reflector silver QPAR30 100W 230V E27 10° QPAR30 100W 230V E27 30°
Protection mode IP65: dust-proof and water-jet proof. Accessories page 1002
h(m)
∅ 185 266666666 1 60°
4666666666 666666 3 ∅ 201
QPAR30
30°
60°
10000 cd
30°
1 2 3 4 5 h(m)
60°
QPAR30
30°
60°
4000 cd
30°
1 2 3 4 5
E(lx) 8182 2045 909 511 327 E(lx) 2728 682 303 170 109
D(m) 10° 0.17 0.35 0.52 0.70 0.87 D(m) 30° 0.54 1.07 1.61 2.14 2.68
Lightcast Downlight for metal halide lamps Housing: cast aluminium, silver powder-coated. Mounting with 2-point support and screw fixing, for ceiling thicknesses of 1-30mm. Side-mounted control gear: plastic, black. Electronic control gear. 2 cable entries. Through-wiring possible. 5-pole terminal block. Darklight reflector: aluminium, bright anodised. Cut-off angle 30°. Diffuser: glass, frosted. Screw-fastened cover ring with safety glass: corrosion-resistant cast aluminium, No-Rinse surface treatment. Silver double powder-coated. To be re-
Size 3 30°
Weight 1.20kg LMF E 0q6p krrIP65
∅ 125 266666 1 60°
160 4666666 3
81040.000 Reflector silver ECG HIT-TC-CE 20W PGJ5 1650lm
∅ 139 4666666 3
996
ERCO Program 2012
moved together with Darklight reflector for lamp replacement. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1002
HIT-TC-CE
30°
60°
1250 cd
30°
h(m)
E(lx)
1 2 3 4 5
794 199 88 50 32
D(m) 65° 1.27 2.55 3.82 5.10 6.37
www.erco.com
Lightcast Downlight for metal halide lamps Housing: cast aluminium, silver powder-coated. Mounting with 3point support and screw fixing, for ceiling thicknesses of 1-30mm. Sidemounted control gear: cast aluminium, powder-coated black. Electronic control gear. 2 cable entries. Through-wiring possible. 5-pole terminal block. Darklight reflector: aluminium, bright anodised. Cut-off angle 30°. Diffuser: glass, frosted. Screw-fastened cover ring with safety glass: corrosion-resistant, cast aluminium, No-rinse surface treatment.
Size 5 30°
81050.000 Reflector silver ECG HIT-CE 70W G12 7750lm
220 4 6666666666 3
Weight 2.70kg LMF E I0q6p krrIP65
Weight 2.70kg LMF E 0q6p krrIP65
220 4 6666666666 3
81042.000 Reflector silver ECG HIT-CE 35W G12 3900lm
Silver double powder-coated. To be removed together with Darklight reflector for lamp replacement. Protection mode IP65: dust-proof and water-jet proof. Accessories page 1002
h(m)
∅ 185 266666666 1 60°
4666666666 666666 3 ∅ 201
HIT-CE
30°
60°
7500 cd
30°
h(m)
∅ 185 266666666 1 60°
4666666666 666666 3 ∅ 201
1 2 3 4 5
HIT-CE
30°
60°
15000 cd
30°
1 2 3 4 5
E(lx) 5343 1336 594 334 214
D(m) 29° 0.52 1.03 1.55 2.07 2.59
E(lx) D(m) 29° 0.52 1.03 1.55 2.07 2.59
10618 2655 1180 664 425
Lightcast Downlight for compact fluorescent lamps Housing: cast aluminium, silver powder-coated. Mounting with 3-point support and screw fixing, for ceiling thicknesses of 1-30mm. Side-mounted control gear: plastic, black. Electronic control gear. 2 cable entries. Through-wiring possible. 5-pole terminal block. Darklight reflector: aluminium, bright anodised. Cut-off angle 30°. Diffuser: plastic, translucent. Screw-fastened cover ring with safety glass: corrosion-resistant, cast aluminium, No-rinse surface treatment. Silver double powder-coated. To be re-
81029.000 Reflector silver ECG TC-TEL 18W GX24q-2 1200lm
Weight 2.40kg LMF E 0qp krrIP65
220 4666666666 3
Size 5 30°
moved together with Darklight reflector for lamp replacement. Protection mode IP65: dust-proof and water-jet proof. Accessories page 1002
∅ 185 266666666 1 60°
4666666666 666666 3 ∅ 201
TC-TEL
30°
60°
600 cd
30°
h(m)
E(lx)
1 2 3 4 5
359 90 40 22 14
D(m) 87° 1.90 3.80 5.69 7.59 9.49
Sheikh Zayed bin Sultan Al Nahyan Mosque, Abu Dhabi. Architect: Yusef Abdelki (design), Halcrow, Dubai Office (implementation). Interior design: Spatium Architects, Milan. Lighting design: Speirs and Major Associates, Edinburgh.
www.erco.com
ERCO Program 2012
997
Lightcast Lens wallwasher with LED
d201 666666 46666666663
81052.000 Reflector silver LED 27W 1740lm 3000K warm white Version 2
Weight 2.60kg LMF E I0qp krrIP65
d185 266666666 1
d201 666666 46666666663
Size 5 40째 DALI PLUG+ PLAY
81049.000 Reflector silver DALI LED 27W 2160lm 4000K neutral white Version 2
Weight 2.60kg LMF E 0qp krrIP65
d185 266666666 1
Weight 2.60kg LMF E 0qp krrIP65
d185 266666666 1
d201 666666 46666666663
anodised, with upper wallwasher lens. Cut-off angle 40째. Screw-fastened cover ring with safety glass: corrosion-resistant cast aluminium, No-Rinse surface treatment. Silver, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1002
Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 0.90 0.90 1.20 1.20 Luminaire spacing (m) 0.90 1.20 1.20 1.50 112 85 67 54 Illuminance En (lx) LED Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 0.90 0.90 1.20 1.20 Luminaire spacing (m) 0.90 1.20 1.20 1.50 90 69 54 44 Illuminance En (lx) LED
Housing: cast aluminium, silver powder-coated. Mounting with 3point support and screw fixing, for ceiling thicknesses of 1-30mm. Sidemounted control gear: cast aluminium, powder-coated black. DALI control gear, with plug and play connectivity. Two cable entries. Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Darklight reflector: aluminium, bright
d201 666666 46666666663
81053.000 Reflector silver DALI LED 27W 1740lm 3000K warm white Version 2
220 4666666666 3
d185 266666666 1
220 4666666666 3
Weight 2.60kg LMF E I0qp krrIP65
220 4666666666 3
81048.000 Reflector silver LED 27W 2160lm 4000K neutral white Version 2
220 4666666666 3
Size 5 40째
Housing: cast aluminium, silver powder-coated. Mounting with 3point support and screw fixing, for ceiling thicknesses of 1-30mm. Sidemounted control gear: cast aluminium, powder-coated black. Electronic control gear. Two cable entries. Through-wiring possible. 5pole terminal block. LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Darklight reflector: aluminium, bright
anodised, with upper wallwasher lens. Cut-off angle 40째. Screw-fastened cover ring with safety glass: corrosion-resistant cast aluminium, No-Rinse surface treatment. Silver, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1002
Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 0.90 0.90 1.20 1.20 Luminaire spacing (m) 0.90 1.20 1.20 1.50 112 85 67 54 Illuminance En (lx) LED Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 0.90 0.90 1.20 1.20 Luminaire spacing (m) 0.90 1.20 1.20 1.50 90 69 54 44 Illuminance En (lx) LED
Lightcast recessed luminaires with LEDs are suitable for energy-efficient lighting concepts in the outdoor area, particularly when used as lens wallwashers.
998
ERCO Program 2012
www.erco.com
Lightcast Lens wallwasher for metal halide lamps Housing: cast aluminium, silver powder-coated. Mounting with 3point support and screw fixing, for ceiling thicknesses of 1-30mm. Sidemounted control gear: cast aluminium, powder-coated black. Electronic control gear. 2 cable entries. Through-wiring possible. 5-pole terminal block. Spherolit technology wallwasher reflector: aluminium, silver, mirror-finish anodised. Darklight reflector: aluminium, bright anodised, with upper wallwasher lens. Cut-off angle 40°.
Size 5 40°
Weight 2.70kg LMF E I0qp krrIP65 d201
Weight 2.70kg LMF E 0qp krrIP65
HIT-CE Mean illuminance En (wall) Wall height (m) 6.0 Offset from wall (m) 1.20 1.50 1.50 Luminaire spacing (m) 1.20 1.50 1.80 274 199 168 Illuminance En (lx)
d185
220
81059.000 Reflector silver ECG HIT-CE 70W G12 7750lm
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.20 1.50 1.50 Luminaire spacing (m) 1.20 1.50 1.80 155 103 87 Illuminance En (lx)
d185
220
81055.000 Reflector silver ECG HIT-CE 35W G12 3900lm
Screw-fastened cover ring with safety glass: corrosion-resistant, cast aluminium, No-rinse surface treatment. Silver double powder-coated. To be removed together with Darklight reflector for lamp replacement. Protection mode IP65: dust-proof and water-jet proof. Accessories page 1002
d201
HIT-CE
Lightcast Directional luminaire with LED Housing: cast aluminium, silver powder-coated. Mounting with 3point support and screw fixing, for ceiling thicknesses of 1-30mm. Sidemounted control gear: cast aluminium, powder-coated black. Electronic control gear. Two cable entries Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. 0°-20° tilt, 360° rotation. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°.
81046.000 Reflector silver LED 20W 1305lm 3000K warm white Version 2 Softec lens, spot
www.erco.com
Weight 2.60kg LMF E I0qp krrIP65
Weight 2.60kg LMF E I0qp krrIP65
220 4666666666 3
81044.000 Reflector silver LED 20W 1620lm 4000K neutral white Version 2 Softec lens, spot
220 4666666666 3
Size 5 30°
h(m)
d 185 266666666 1
d 201 4666666666 6366666
60°
LED
30°
60°
14000 cd
30°
1 2 3 4 5 h(m)
d 185 266666666 1
d 201 4666666666 6366666
Screw-fastened cover ring with safety glass: corrosion-resistant cast aluminium, No-Rinse surface treatment. Silver, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1002
60°
LED
30°
60°
14000 cd
30°
1 2 3 4 5
E(lx) D(m) 16° 11162 0.28 2791 0.56 1240 0.84 698 1.12 446 1.41 E(lx) 8992 2248 999 562 360
ERCO Program 2012
D(m) 16° 0.28 0.56 0.84 1.12 1.41
999
Lightcast Directional luminaire with LED Housing: cast aluminium, silver powder-coated. Mounting with 3point support and screw fixing, for ceiling thicknesses of 1-30mm. Sidemounted control gear: cast aluminium, powder-coated black. DALI control gear, with plug and play connectivity. Two cable entries. Through-wiring possible. 5-pole terminal block. LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. 0°-20° tilt, 360° rotation.
Size 5 30° DALI PLUG+ PLAY
81047.000 Reflector silver DALI LED 20W 1305lm 3000K warm white Version 2 Softec lens, spot
220 4666666666 3
Weight 2.60kg LMF E 0qp krrIP65
Weight 2.60kg LMF E 0qp krrIP65
220 4666666666 3
81045.000 Reflector silver DALI LED 20W 1620lm 4000K neutral white Version 2 Softec lens, spot
h(m)
d 185 266666666 1
d 201 4666666666 6366666
60°
LED
30°
60°
14000 cd
30°
1 2 3 4 5 h(m)
d 185 266666666 1
d 201 4666666666 6366666
Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Screw-fastened cover ring with safety glass: corrosion-resistant cast aluminium, No-Rinse surface treatment. Silver, double powder-coated. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1002
60°
LED
30°
60°
14000 cd
30°
1 2 3 4 5
E(lx) D(m) 16° 11162 0.28 2791 0.56 1240 0.84 698 1.12 446 1.41 E(lx) 8992 2248 999 562 360
D(m) 16° 0.28 0.56 0.84 1.12 1.41
Lightcast Directional luminaire for low-voltage halogen lamps Housing: cast aluminium, silver powder-coated. Lampholder carrier inclined to 15°. Mounting with 2-point support and screw fixing, for ceiling thicknesses of 1-30mm. Side-mounted control gear: plastic, black. Electronic transformer 230/12V. 2 cable entries. Through-wiring possible. 4-pole terminal block. Darklight reflector: aluminium, bright anodised. Cut-off angle 30°. Screw-fastened cover ring with safety glass: corrosion-resistant, cast aluminium, No-rinse surface treatment. Silver double powder-coated. To be re-
Size 3 30°
Weight 1.20kg LMF E I0q6p i krrIP65
h(m)
∅ 125 266666 1 60°
160 4666666 3
81011.000 Reflector silver QR-CBC51-RE 35W 12V GU5.3 10° QR-CBC51-RE 35W 12V GU5.3 36°
moved together with Darklight reflector for lamp replacement. Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water-jet proof. Accessories page 1002
∅ 139 4666666 3
QR-CBC51-RE
30°
60°
15000 cd
30°
1 2 3 4 5 h(m)
60°
QR-CBC51-RE
Housing: cast aluminium, silver powder-coated. Lampholder carrier 0°-15° tilt. Mounting with 3-point support and screw fixing, for ceiling thicknesses of 1-30mm. Side-mounted control gear: plastic, black. Electronic transformer 230/12V. 2 cable entries. Through-wiring possible. 4-pole terminal block. Reflector: aluminium, silver, bright anodised. Sculpture lens. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Screw-fastened cover ring with safety glass: corrosion-resistant, cast alu-
81021.000 Reflector silver QT12-ax 100W 12V GY6.35 2200lm Spot reflector
1000
ERCO Program 2012
Weight 2.50kg LMF E I0q6p i krrIP65
220 4 6666666666 3
Size 5 30°
30°
60°
3000 cd
30°
60°
QT12-ax
E(lx) 2000 500 222 125 80
D(m) 36° 0.65 1.30 1.95 2.60 3.25
minium, No-rinse surface treatment. Silver double powder-coated. To be removed together with Darklight reflector for lamp replacement. Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water-jet proof. Accessories page 1002
∅ 185 266666666 1
4666666666 6666666 3 ∅ 201
1 2 3 4 5
E(lx) D(m) 10° 11363 0.17 2841 0.35 1263 0.52 710 0.70 455 0.87
30°
60°
4000 cd
30°
h(m) E(lx) D(m) 29° 1 2869 0.52 2 717 1.03 3 319 1.55 4 179 2.07 5 115 2.59
51° 0.95 1.91 2.86 3.82 4.77
www.erco.com
Lightcast Directional luminaire for PAR lamps Housing: cast aluminium, silver powder-coated. Lampholder carrier 0°-15° tilt. Mounting with 3-point support and screw fixing, for ceiling thicknesses of 1-30mm. Side-mounted control gear: plastic, black. 2 cable entries. Through-wiring possible. 5-pole terminal block. Darklight reflector: aluminium, bright anodised. Cut-off angle 30°. Sculpture lens. Screw-fastened cover ring with safety glass: corrosion-resistant, cast aluminium, No-rinse surface treatment. Silver double powder-coated. To be re-
Size 5 30°
Weight 2.50kg LMF E I0q8p krrIP65
∅ 185 266666666 1 220 4 6666666666 3
81027.000 Reflector silver QPAR30 100W 230V E27 10°
moved together with Darklight reflector for lamp replacement. Protection mode IP65: dust-proof and water-jet proof. Accessories page 1002
60°
4666666666 666666 3 ∅ 201
QPAR30
30°
60°
2000 cd
30°
h(m) E(lx) D(m) 49° 1 1581 0.91 2 395 1.82 3 176 2.73 4 99 3.65 5 63 4.56
23° 0.41 0.81 1.22 1.63 2.03
Lightcast Directional luminaire for metal halide lamps Housing: cast aluminium, silver powder-coated. Lampholder carrier 0°-15° tilt. Mounting with 3-point support and screw fixing, for ceiling thicknesses of 1-30mm. Side-mounted control gear: cast aluminium, powdercoated black. Electronic control gear. 2 cable entries. Through-wiring possible. 5-pole terminal block. Reflector: aluminium, silver, bright anodised. Sculpture lens. Darklight reflector: aluminium, bright anodised. Cut-off angle 30°. Screw-fastened cover ring with safety
81051.000 Reflector silver ECG HIT-CE 70W G12 7750lm Spot reflector
Weight 2.90kg LMF E I0q6p krrIP65
Weight 2.90kg LMF E 0q6p krrIP65
220 4 6666666666 3
81043.000 Reflector silver ECG HIT-CE 35W G12 3900lm Spot reflector
220 4 6666666666 3
Size 5 30°
glass: corrosion-resistant, cast aluminium, No-rinse surface treatment. Silver double powder-coated. To be removed together with Darklight reflector for lamp replacement. Protection mode IP65: dust-proof and water-jet proof. Accessories page 1002
∅ 185 266666666 1 60°
4666666666 666666 3 ∅ 201
HIT-CE
30°
60°
10000 cd
30°
h(m)
∅ 185 266666666 1 60°
4666666666 666666 3 ∅ 201
h(m) E(lx) D(m) 17° 1 6797 0.30 2 1699 0.60 3 755 0.90 4 425 1.20 5 272 1.49
HIT-CE
30°
60°
22000 cd
30°
1 2 3 4 5
E(lx) D(m) 17° 13506 0.30 3376 0.60 1501 0.90 844 1.20 540 1.49
42° 0.77 1.54 2.30 3.07 3.84 42° 0.77 1.54 2.30 3.07 3.84
AstraZeneca Central Operations, Södertälje. Architect: Lomar Arkitekter AB, Stockholm.
www.erco.com
ERCO Program 2012
1001
00 1 .0
00 81
90 4666666 3 45 466 3
83978.000 83997.000 Softec lens
66 36666 43343 CO 125
4360 663 20 666 34
86
00 81
83
•
380 466 3
83581.000 Concrete housing Metal, powder-coated. Recommended 0-8mm aggregate for the concrete. Weight 5.20kg
125
663664295 63 CO 185
3664 440 4666 3
4360 663 20 666 34
• • • • • • • •
1.0
00 59
•
83
• • •
4.0
00 58
1.0
00 82
9.0
00 7.0 99
8.0
00 83
83
•
83
81011.000 81021.000 81027.000 81043.000 81044.000 81045.000 81046.000 81047.000 81051.000
97
83
97
Directional luminaires
83
9.0
00
3664 440 4666 3
200 3666 4
• • • • • •
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
380 466 3
235 3666 4
00 1 .0 81
83
83
59
4 .0
00
58 70 3 46666 3 4666
00 1 .0 58
83
81048.000 81049.000 81052.000 81053.000 81055.000 81059.000
83
59
•
• •
00
83
82
9 .0
00 99
7 .0
00 83
83
97
8 .0
00 9 .0 97
83979.000 Sculpture lens
• • • •
•
83
• •
• • •
• • • •
Lens wallwashers
83
• •
•
• • • •
•
4 .0
00 1 .0
00 83
58
9 .0
00 82 83
99
7 .0
00 8 .0
83
81010.000 81012.000 81020.000 81026.000 81029.000 81032.000 81033.000 81034.000 81035.000 81036.000 81037.000 81038.000 81039.000 81040.000 81042.000 81050.000
83
83
97
Downlights
97
9 .0
00
Lightcast Accessories
83594.000 Concrete housing Metal, powder-coated. Recommended 0-8mm aggregate for the concrete. Weight 5.50kg
∅ 143 46666 3
83811.000 Spacer plate Plastic. For flush-mounting of downlights in concrete housings in exposed concrete ceilings. Weight 0.08kg
1002
ERCO Program 2012
www.erco.com
Paratec Recessed luminaires Paratec recessed luminaires give walls an almost immaterial quality through perfectly uniform lighting. This effect is further enhanced when, as with Paratec, the light source is hidden discreetly. This family of luminaires with their cast aluminium housings, rated IP65, is also suitable for use in indoor areas that are particularly subject to dust or moisture, e.g. swimming pools, wellness centres or historic buildings. Paratec wallwashers have the same highly asymmetrical light distribution as the Parscoop. The difference is that Paratec wallwashers are installed in walls or ceilings.
Wallwashers Asymmetrical light distribution for highly uniform wallwashing.
Wallwashing Vertical illuminance for brightening the surroundings and dividing the outside.
Tungsten halogen lamps 80W - 230W 1450lm - 5000lm High- pressure discharge lamps 35W - 150W 3900lm - 14200lm
Europabad, Karlsruhe. Architect: Geier+Geier, Stuttgart. Lighting design: b.i.g. Bechtold Ingenieurgesellschaft, Karlsruhe.
www.erco.com
ERCO Program 2012
1003
Paratec Recessed luminaires The Paratec wallwasher illuminates the wall from the very top and can thus create scenic lighting effects on faรงades. Its light distribution ensures highly uniform illumination of the wall and is suitable for faรงade heights of up to 12m.
The uniform light distribution is ideal both for vertical surfaces and horizontal surfaces as Paratec can be installed as a recessed ceiling or recessed wall luminaire.
The reflector geometry creates an asymmetrical light beam to produce a highly uniform illumination. The luminaire projects below the surface to produce maximum uniformity. When used for wallwashing as a ceilingmounted version, the luminaire spreads the light from the very top of the wall at ceiling level. This produces a uniform impression of brightness on the surface from top to bottom.
1004
ERCO Program 2012
www.erco.com
Paratec Wallwasher for tungsten halogen lamps treatment. Double powder-coated. Recessed mounting: housing: corrosion-resistant cast aluminium, No-Rinse Removable for lamp replacement. Protection mode IP65: dust-proof and surface treatment. Double powdercoated. Mounting with 4-point support water jet-proof. and screw fixing, for ceiling thicknesses Accessories page 1007 of 1-25mm. Separate connection compartment: 2 cable entries. Through-wiring possible. 5-pole terminal block. Wallwasher reflector: aluminium, silver, satin matt anodised. Surface mounting: luminaire attachment with safety glass: corrosion-resistant cast aluminium, No-Rinse surface 142x256 120
215
158
272
189
Weight 2.65kg LMF E I58p krrIP65
123
33900.000 Graphit m 33901.000 White (RAL9002) QT-DE12-RE 80W 230V R7s L75mm 1450lm
Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 1.00 1.00 1.25 1.25 Luminaire spacing (m) 1.00 1.25 1.25 1.50 235 191 165 139 Illuminance En (lx)
75°
QT-DE12-RE
45°
1250 cd
treatment. Double powder-coated. Recessed mounting: housing: corrosion-resistant cast aluminium, No-Rinse Removable for lamp replacement. Protection mode IP65: dust-proof and surface treatment. Double powdercoated. Mounting with 4-point support water jet-proof. and screw fixing, for ceiling thicknesses Accessories page 1007 of 1-25mm. Separate connection compartment: 2 cable entries. Through-wiring possible. 5-pole terminal block. Wallwasher reflector: aluminium, silver, satin matt anodised. Surface mounting: luminaire attachment with safety glass: corrosion-resistant cast aluminium, No-Rinse surface 189x274 165
233
205
290
224
Weight 3.80kg LMF E I58p krrIP65
135
33920.000 Graphit m 33921.000 White (RAL9002) QT-DE12-RE 120W 230V R7s L114mm 2300lm
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.25 1.25 1.50 1.50 Luminaire spacing (m) 1.25 1.50 1.50 2.00 254 213 197 149 Illuminance En (lx)
75°
QT-DE12-RE
45°
2000 cd
treatment. Double powder-coated. Recessed mounting: housing: corrosion-resistant cast aluminium, No-Rinse Removable for lamp replacement. Protection mode IP65: dust-proof and surface treatment. Double powdercoated. Mounting with 4-point support water jet-proof. and screw fixing, for ceiling thicknesses Accessories page 1007 of 1-25mm. Separate connection compartment: 2 cable entries. Through-wiring possible. 5-pole terminal block. Wallwasher reflector: aluminium, silver, satin matt anodised. Surface mounting: luminaire attachment with safety glass: corrosion-resistant cast aluminium, No-Rinse surface 232x302 208
262
248
318
251
Weight 4.70kg LMF E I58p krrIP65
140
33940.000 Graphit m 33941.000 White (RAL9002) QT-DE12-RE 230W 230V R7s L114mm 5000lm
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.25 1.25 1.50 1.50 Luminaire spacing (m) 1.25 1.50 1.50 2.00 556 465 437 329 Illuminance En (lx)
75°
QT-DE12-RE
www.erco.com
45°
4000 cd
ERCO Program 2012
1005
Paratec Wallwasher for metal halide lamps treatment. Double powder-coated. Recessed mounting: housing: corrosion-resistant cast aluminium, No-Rinse Removable for lamp replacement. Protection mode IP65: dust-proof and surface treatment. Double powdercoated. Mounting with 4-point support water jet-proof. and screw fixing, for ceiling thicknesses Accessories page 1007 of 1-25mm. Separate connection compartment: 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Wallwasher reflector: aluminium, silver, satin matt anodised. Surface mounting: luminaire attachment with safety glass: corrosion-resistant cast aluminium, No-Rinse surface Weight 3.00kg LMF E I56p krrIP65
142x256 120
215
158
272
189
123
33905.000 Graphit m ECG 33906.000 White (RAL9002) ECG HIT-CE 35W G12 3900lm
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.50 1.50 1.75 1.75 Luminaire spacing (m) 1.50 2.00 1.75 2.50 352 267 283 200 Illuminance En (lx)
75°
HIT-CE
45°
2500 cd
treatment. Double powder-coated. Recessed mounting: housing: corrosion-resistant cast aluminium, No-Rinse Removable for lamp replacement. HST-DE 70W possible. surface treatment. Double powdercoated. Mounting with 4-point support Protection mode IP65: dust-proof and and screw fixing, for ceiling thicknesses water jet-proof. Accessories page 1007 of 1-25mm. Separate connection compartment: 2 cable entries. Through-wiring possible. 5-pole terminal block. Electronic control gear. Wallwasher reflector: aluminium, silver, satin matt anodised. Surface mounting: luminaire attachment with safety glass: corrosion-resistant cast aluminium, No-Rinse surface 189x274 165
233
205
290
224
Weight 4.30kg LMF E I56p krrIP65
135
33925.000 Graphit m ECG 33926.000 White (RAL9002) ECG HIT-DE-CE 70W RX7s 6500lm
Mean illuminance En (wall) Wall height (m) 6.0 Offset from wall (m) 1.75 1.75 2.00 2.00 Luminaire spacing (m) 1.75 2.00 2.00 2.50 324 286 272 219 Illuminance En (lx)
75°
HIT-DE-CE
45°
5000 cd
ant cast aluminium, No-Rinse surface Recessed mounting: housing: corrosion-resistant cast aluminium, No-Rinse treatment. Double powder-coated. Removable for lamp replacement. surface treatment. Double powdercoated. Mounting with 4-point support HST-DE 150W possible. and screw fixing, for ceiling thicknesses Protection mode IP65: dust-proof and water jet-proof. of 1-25mm. Accessories page 1007 Separate connection compartment: 2 cable entries. Through-wiring possible. 5-pole terminal block. Control gear, 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. Wallwasher reflector: aluminium, silver, satin matt anodised. Surface mounting: luminaire attachment with safety glass: corrosion-resist232x302 208
262
248
318
251
Weight 7.20kg LMF E 56p krrIP65
140
33945.000 Graphit m 33946.000 White (RAL9002) HIT-DE-CE 150W RX7s 14200lm
Mean illuminance En (wall) Wall height (m) 8.0 Offset from wall (m) 2.50 2.50 3.00 3.00 Luminaire spacing (m) 2.50 3.00 3.00 3.50 386 323 301 259 Illuminance En (lx)
75°
HIT-DE-CE
1006
ERCO Program 2012
45°
10000 cd
www.erco.com
00 96
7 .0
00 96
58 70 3 46666 3 4666
256 4CO 3 6666
4663
CO 189
46663
66366664
CO 142
276 336 3 46666 3 466666
139
318 466666 3
20 364 66
233 4666 3
6636664
• • • •
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
127
• • • •
3666 420
• •
90 4666666 3 45 466 3
• • • •
33
• • • • • • • • • • • •
• •
6 .0
00
• •
33
96
5 .0
00 4 .0
33
97 34
33900.000 33901.000 33905.000 33906.000 33920.000 33921.000 33925.000 33926.000 33940.000 33941.000 33945.000 33946.000
83
82
9 .0
00
Paratec Accessories
274 4CO 6666 3
33966.000 Concrete housing Metal, black powder-coated. Recommended 0-8mm aggregate for the concrete. Weight 3.90kg
33965.000 Concrete housing Metal, black powder-coated. Recommended 0-8mm aggregate for the concrete. Weight 3.60kg
CO 302 466666 3
144
232 4CO 6666 3
366664 666666
20 364 66666
315 382 3 466666 3 46666666
33967.000 Concrete housing Metal, black powder-coated. Recommended 0-8mm aggregate for the concrete. Weight 4.60kg
Köpcentrum 421, Västra Frölunda. Architecture and lighting design: Wingardh Arkitektkontor AB, Gothenburg.
www.erco.com
ERCO Program 2012
1007
Surface-mounted luminaires Often quite pragmatic considerations lead to the use of surface- mounted luminaires - such as when there is insufficient space in the ceiling to install conventional downlights. The conscious decision for a lighting concept with surface-mounted luminaires considerably reduces the level of installation work in solid ceilings or existing buildings, plus the lighting design can be flexibly adjusted to suit the given situation. Surface-mounted luminaires are available with various light characteristics ranging from downlights and directional luminaires to wallwashers, making them ideal for continuing lighting concepts from the indoor into the outdoor area.
Cylinder
1008
LED Low-voltage halogen lamps PAR lamps High-pressure discharge lamps Fluorescent lamps
ERCO Program 2012
1011 1011 1012 1012 1013
1014
1014 1015 1015 1015
www.erco.com
Cylinder Surface- mounted luminaires The housing of the Cylinder surface- mounted downlights for general and accent lighting and for wallwashing is made of powder- coated, corrosion resistant aluminium. The Darklight technology combines the maximum visual comfort with the optimum light output ratio. The surface- mounted downlights with an extremely high IP rating are particularly suitable for the transitional areas between indoors and outdoors. Cylinder surfacemounted downlights illuminate entrance zones, arcades or atriums effectively. In indoor areas where protection against moisture or dust is required, they ensure highquality lighting even in harsh conditions.
General lighting Ambient lighting produced by wide beam light distribution.
Surface- mounted downlights Wide beam, rotationally symmetrical light distribution for general lighting.
LED 6,3W - 27W 480lm - 2160lm Size 3, 5 Low- voltage halogen lamps 50W - 100W 1250lm - 2200lm Size 3, 5 PAR lamps 100W 1300lm Size 5 High- pressure discharge lamps 20W - 70W 1650lm - 6600lm Size 3, 5 Fluorescent lamps 18W 1200lm Size 5
Wallwashing Vertical illuminance for brightening the surroundings and segmenting the exterior landscape.
Surface- mounted lens wallwashers Asymmetrical light distribution for highly uniform faรงade illumination.
LED 27W 1740lm - 2160lm Size 5
Accentuation Emphasis of objects or architectural elements produced by a narrow beam.
Surface- mounted directional luminaires Narrow to very wide beam, rotationally symmetrical light distribution for accent lighting.
LED 20W 1305lm - 1620lm Size 5 Spot Low- voltage halogen lamps 100W 2200lm Size 5 Spot PAR lamps 100W 1300lm Size 5 High- pressure discharge lamps 35W - 70W 3300lm - 6600lm Size 5 Spot
www.erco.com
ERCO Program 2012
1009
Cylinder Surface- mounted luminaires
The downlights produce a widebeam light distribution for ambient lighting, e.g. for entrances or passages.
The lens wallwasher produces an asymmetrical light distribution for uniform illumination of vertical surfaces.
The sculpture lens fitted in the directional luminaire changes the circular beam to an oval. This means that a linear arrangement can produce a band of light on the ground. If directed onto the wall, the light distribution can
produce a wallwashing effect.
The narrow beam angle of the directional luminaires is ideal both for highlighting architectural details and accenting objects. The lampholder carrier can be tilted by up to 20째.
1010
ERCO Program 2012
www.erco.com
Cylinder Surface-mounted downlight with LED
Size 3 30°
Weight 1.70kg LMF E 0qp krrIP65 d122
LED
Weight 1.70kg LMF E 0qp krrIP65 d122
LED
Size 5 30°
Cylinder and ceiling fixture: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Electronic control gear. 1 cable entry. 3-pole terminal block. Through-wiring with M16 cable gland (not supplied). LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Diffuser: glass, frosted. Fixing ring with safety glass: corro-
Weight 4.10kg LMF E I0qp krrIP65
30°
30°
60°
500 cd
30°
h(m)
E(lx)
1 2 3 4 5
299 75 33 19 12
h(m)
E(lx)
1 2 3 4 5
240 60 27 15 10
Weight 4.10kg LMF E I0qp krrIP65
LED
30°
60°
1800 cd
30°
1 2 3 4 5 h(m)
60°
281 d180
LED
D(m) 73° 1.48 2.96 4.44 5.92 7.40 D(m) 73° 1.48 2.96 4.44 5.92 7.40
sion-resistant cast aluminium, double powder-coated. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
h(m)
d180
85049.000 Graphit m LED 27W 1740lm 3000K warm white Version 2
500 cd
60°
281
85048.000 Graphit m LED 27W 2160lm 4000K neutral white Version 2
30°
60°
60°
181
85043.000 Graphit m LED 6.3W 480lm 3000K warm white Version 2
sion-resistant cast aluminium, double powder-coated. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
60°
181
85041.000 Graphit m LED 6.3W 600lm 4000K neutral white Version 2
Cylinder and ceiling fixture: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Electronic control gear. 1 cable entry. 2-pole terminal block. Through-wiring with M16 cable gland (not supplied). LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Diffuser: glass, frosted. Fixing ring with safety glass: corro-
30°
60°
1800 cd
30°
1 2 3 4 5
E(lx) 1284 321 143 80 51 E(lx) 1034 259 115 65 41
D(m) 64° 1.25 2.50 3.75 5.00 6.25 D(m) 64° 1.25 2.50 3.75 5.00 6.25
Cylinder Surface-mounted downlight for low-voltage halogen lamps
Size 3 30°
Weight 1.55kg LMF E I56p krrIP65 d122
QT12-ax-RE
www.erco.com
with Darklight reflector for lamp replacement. Tamper-proof screw. Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
60°
181
85025.000 Graphit m QT12-ax-RE 50W 12V GY6.35 1250lm
Cylinder and mounting plate: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powdercoated. Electronic transformer 230/240/12V. 1 cable entry. 2-pole terminal block. Through-wiring with M16 cable gland (not supplied). Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Diffuser: glass, frosted. Fixing ring with safety glass: corrosion-resistant cast aluminium, double powder-coated. To be removed together
30°
60°
1250 cd
30°
h(m)
E(lx)
1 2 3 4 5
892 223 99 56 36
ERCO Program 2012
D(m) 55° 1.04 2.08 3.12 4.16 5.21
1011
Cylinder Surface-mounted downlight for low-voltage halogen lamps
Size 5 30°
Weight 3.70kg LMF E I56p krrIP65
with Darklight reflector for lamp replacement. Tamper-proof screw. Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
h(m) 60°
281
85030.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm
Cylinder and mounting plate: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powdercoated. Electronic transformer 230/12V, 35-105W. 1 cable entry. 3-pole terminal block. Through-wiring with M16 cable gland (not supplied). Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Diffuser: glass, frosted. Fixing ring with safety glass: corrosion-resistant cast aluminium, double powder-coated. To be removed together
d180
QT12-ax
30°
60°
4500 cd
30°
1 2 3 4 5
E(lx) 3588 897 399 224 144
D(m) 26° 0.46 0.92 1.39 1.85 2.31
Cylinder Surface-mounted downlight for PAR lamps
Size 5 30°
Weight 3.70kg LMF E I58p krrIP65
Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
h(m) 60°
281
85035.000 Graphit m QPAR30 100W 230V E27 10° QPAR30 100W 230V E27 30°
Cylinder and mounting plate: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powdercoated. 1 cable entry. 3-pole terminal block. Through-wiring with M16 cable gland (not supplied). Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Fixing ring with safety glass: corrosion-resistant cast aluminium, double powder-coated. To be removed together with Darklight reflector for lamp replacement. Tamper-proof screw.
d180
QPAR30
30°
60°
10000 cd
30°
1 2 3 4 5 h(m)
60°
QPAR30
30°
60°
4000 cd
30°
1 2 3 4 5
E(lx) 8182 2045 909 511 327 E(lx) 2728 682 303 170 109
D(m) 10° 0.17 0.35 0.52 0.70 0.87 D(m) 30° 0.54 1.07 1.61 2.14 2.68
Cylinder Surface-mounted downlight for metal halide lamps
Size 3 30°
Weight 1.50kg LMF E 56p krrIP65 d122
HIT-TC-CE
1012
ERCO Program 2012
Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
60°
181
85044.000 Graphit m ECG HIT-TC-CE 20W PGJ5 1650lm
Cylinder and mounting plate: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Electronic control gear. 1 cable entry. 2-pole terminal block. Through-wiring with M16 cable gland (not supplied). Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Diffuser: glass, frosted. Fixing ring with safety glass: corrosion-resistant cast aluminium, double powder-coated. To be removed together with Darklight reflector for lamp replacement. Tamper-proof screw.
30°
60°
1250 cd
30°
h(m)
E(lx)
1 2 3 4 5
794 199 88 50 32
D(m) 65° 1.27 2.55 3.82 5.10 6.37
www.erco.com
Cylinder Surface-mounted downlight for metal halide lamps
Size 5 30°
Weight 4.65kg LMF E I56p krrIP65
h(m)
d180
Weight 5.05kg LMF E 56p krrIP65
HIT-CE
30°
60°
7500 cd
30°
1 2 3 4 5 h(m)
60°
281
85065.000 Graphit m HIT-CE 70W G12 6600lm
with Darklight reflector for lamp replacement. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
60°
281
85045.000 Graphit m HIT-CE 35W G12 3300lm
Cylinder and mounting plate: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powdercoated. Control gear 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. 1 cable entry. 3-pole terminal block. Through-wiring with M16 cable gland (not supplied). Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Diffuser: glass, frosted. Fixing ring with safety glass: corrosion-resistant cast aluminium, double powder-coated. To be removed together
d180
HIT-CE
30°
60°
15000 cd
30°
1 2 3 4 5
E(lx) 4521 1130 502 283 181 E(lx) 9043 2261 1005 565 362
D(m) 29° 0.52 1.03 1.55 2.07 2.59 D(m) 29° 0.52 1.03 1.55 2.07 2.59
Cylinder Surface-mounted downlight for compact fluorescent lamps
Size 5 30°
Weight 3.90kg LMF E 56p krrIP65 d180
Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
60°
281
85060.000 Graphit m ECG TC-TEL 18W GX24q-2 1200lm
Cylinder and mounting plate: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powdercoated. Electronic control gear. 1 cable entry. 3-pole terminal block. Through-wiring with M16 cable gland (not supplied). Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Diffuser: plastic, translucent. Fixing ring with safety glass: corrosion-resistant cast aluminium, double powder-coated. To be removed together with Darklight reflector for lamp replacement. Tamper-proof screw.
TC-TEL
30°
60°
600 cd
30°
h(m)
E(lx)
1 2 3 4 5
359 90 40 22 14
D(m) 87° 1.90 3.80 5.69 7.59 9.49
Private residence, Humlebaek. Architect: M M Arkitekter, Kopenhagen.
www.erco.com
ERCO Program 2012
1013
Cylinder Surface-mounted lens wallwasher with LED
Size 5 40°
Weight 4.10kg LMF E I0qp krrIP65 d180
Weight 4.10kg LMF E I0qp krrIP65
LED Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 0.90 0.90 1.20 1.20 Luminaire spacing (m) 0.90 1.20 1.20 1.50 87 67 51 41 Illuminance En (lx)
281
85057.000 Graphit m LED 27W 1740lm 3000K warm white Version 2
Fixing ring with cover glass: corrosion-resistant cast aluminium, double powder-coated. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 0.90 0.90 1.20 1.20 Luminaire spacing (m) 0.90 1.20 1.20 1.50 109 83 63 51 Illuminance En (lx)
281
85054.000 Graphit m LED 27W 2160lm 4000K neutral white Version 2
Cylinder and ceiling fixture: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Electronic control gear. 1 cable entry. 3-pole terminal block. Through-wiring with M16 cable gland (not supplied). LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Darklight reflector: aluminium, bright anodised, with upper wallwasher lens. Cut-off angle 40°. Rotatable through 360°.
d180
LED
Cylinder Surface-mounted directional luminaire with LED
Size 5 30°
Weight 4.10kg LMF E I0qp krrIP65 d180
Weight 4.10kg LMF E I0qp krrIP65
ERCO Program 2012
LED
30°
60°
15000 cd
30°
1 2 3 4 5 h(m)
d180
1014
60°
60°
281
85051.000 Graphit m LED 20W 1305lm 3000K warm white Version 2 Softec lens, spot
sion-resistant cast aluminium, double powder-coated. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
h(m) 281
85050.000 Graphit m LED 20W 1620lm 4000K neutral white Version 2 Softec lens, spot
Cylinder and ceiling fixture: corrosionresistant cast aluminium, No-Rinse surface treatment. Double powdercoated. Electronic control gear. 1 cable entry. 3-pole terminal block. Through-wiring with M16 cable gland (not supplied). LED module: high-power LEDs on metal-core PCB. Collimating lens made of optical polymer. 0°-20° tilt, 360° rotation. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Fixing ring with safety glass: corro-
LED
30°
60°
15000 cd
30°
1 2 3 4 5
E(lx) D(m) 16° 10979 0.28 2745 0.56 1220 0.84 686 1.12 439 1.41 E(lx) 8844 2211 983 553 354
D(m) 16° 0.28 0.56 0.84 1.12 1.41
www.erco.com
Cylinder Surface-mounted directional luminaire for low-voltage halogen lamps
Size 5 30°
Weight 4.10kg LMF E I56p krrIP65 d180
powder-coated. To be removed together with Darklight reflector for lamp replacement. Tamper-proof screw. Use dimmers for electronic transformers (trailing edge). Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
60°
281
85070.000 Graphit m QT12-ax 100W 12V GY6.35 2200lm Spot reflector
Cylinder and mounting plate: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powdercoated. Lampholder carrier tiltable 0°-15°. Electronic transformer 230/12V, 35-105W. 1 cable entry. 3-pole terminal block. Through-wiring with M16 cable gland (not supplied). Reflector: aluminium, silver, bright anodised. Sculpture lens. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Fixing ring with safety glass: corrosion-resistant cast aluminium, double
QT12-ax
30°
60°
4000 cd
30°
h(m) E(lx) D(m) 29° 1 2869 0.52 2 717 1.03 3 319 1.55 4 179 2.07 5 115 2.59
51° 0.95 1.91 2.86 3.82 4.77
Cylinder Surface-mounted directional luminaire for PAR lamps
Size 5 30°
Weight 3.90kg LMF E I58p krrIP65 d180
with Darklight reflector for lamp replacement. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
60°
281
85075.000 Graphit m QPAR30 100W 230V E27 10°
Cylinder and mounting plate: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powdercoated. Lampholder carrier tiltable 0°-15°. 1 cable entry. 3-pole terminal block. Through-wiring with M16 cable gland (not supplied). Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Sculpture lens. Fixing ring with safety glass: corrosion-resistant cast aluminium, double powder-coated. To be removed together
QPAR30
30°
60°
2000 cd
30°
h(m) E(lx) D(m) 49° 1 1581 0.91 2 395 1.82 3 176 2.73 4 99 3.65 5 63 4.56
23° 0.41 0.81 1.22 1.63 2.03
Cylinder Surface-mounted directional luminaire for metal halide lamps
Size 5 30°
Weight 5.00kg LMF E I56p krrIP65 d180
Weight 5.30kg LMF E 56p krrIP65
30°
60°
10000 cd
30°
h(m) E(lx) D(m) 17° 1 5751 0.30 2 1438 0.60 3 639 0.90 4 359 1.20 5 230 1.49 h(m)
d180
www.erco.com
HIT-CE
60°
281
85090.000 Graphit m HIT-CE 70W G12 6600lm Spot reflector
sion-resistant cast aluminium, double powder-coated. To be removed together with Darklight reflector for lamp replacement. Tamper-proof screw. Protection mode IP65: dust-proof and water jet-proof. Accessories page 1016
60°
281
85085.000 Graphit m HIT-CE 35W G12 3300lm Spot reflector
Cylinder and mounting plate: corrosion-resistant cast aluminium, No-rinse surface treatment. Double powdercoated. Lampholder carrier tiltable 0°-15°. Control gear 230V, 50Hz, with temperature controller, timer-ignitor, capacitor. 1 cable entry. 3-pole terminal block. Through-wiring with M16 cable gland (not supplied). Reflector: aluminium, silver, bright anodised. Sculpture lens. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 30°. Fixing ring with safety glass: corro-
HIT-CE
30°
60°
22000 cd
30°
1 2 3 4 5
E(lx) D(m) 17° 11502 0.30 2875 0.60 1278 0.90 719 1.20 460 1.49
ERCO Program 2012
42° 0.77 1.54 2.30 3.07 3.84 42° 0.77 1.54 2.30 3.07 3.84
1015
00
90 4666666 3 45 466 3
99
83997.000 Softec lens • • • • • • • • • • • • •
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
180 466666 3 3666 420
• •
• • • • • •
• • •
58 70 3 46666 3 4666
• •
120 466666 3
• •
4 .0
00
• •
•
•
• • •
34
34
99
0 .0
00 4 .0
00 34
97
9 .0 82 83
85025.000 85030.000 85035.000 85041.000 85043.000 85044.000 85045.000 85048.000 85049.000 85050.000 85051.000 85054.000 85057.000 85060.000 85065.000 85070.000 85075.000 85085.000 85090.000
83
99
7 .0
00
Cylinder Accessories
3666 420 34990.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.16kg
34994.000 Spacer for surface-mounted cables. Corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Weight 0.28kg
Baths, Bad Boll. Architect: Michel+Wolf+Partner, Stuttgart.
1016
ERCO Program 2012
www.erco.com
In-ground luminaires In-ground luminaires are noticed catchers since the light source is positioned at ground level and the distinctive upward light direction immediately attracts attention In this respect they also assume some tasks of directive lighting, e. g. by marking pathways or highlighting entrances. In addition to these rather technical applications, the luminaires can also provide highly effective architectural lighting, whether individual features are dramatically highlighted or to emphasise architectural lines using a row of luminaires.
Tesis IP68
LED orientation luminaires IP68
LED Low-voltage halogen lamps High-pressure discharge lamps
LED
1024 1025
1022 1025
1023
1028 1031
1026
1043
1041
New in the program
LED orientation luminaires IP68 1039
www.erco.com
ERCO Program 2012
1017
Tesis IP68 In- ground luminaires Tesis IP68 in- ground luminaires include more than the typical outdoor lighting design tools such as uplights, directional luminaires and wallwashers. In addition, Tesis IP68 also sets high standards in terms of visual comfort due to the extensive use of darklight reflector technology. The discreetly concealed light source in the ground produces a dramatic effect for ambitious lighting concepts. Faรงades and vegetation are enhanced by impressive scenic effects produced by the Tesis IP68. The selection of round or square housing forms makes it possible to select the luminaire shape in conformity with the architectural language. All luminaires are supplied with an electrical connection cable for efficient mounting.
Wallwashing Vertical illuminance for brightening the surroundings and dividing the outside.
Lens wallwashers Asymmetrical light distribution for highly uniform wallwashing.
LED 27W 1740lm - 2160lm Size 5 Optional: DALI High- pressure discharge lamps 20W - 150W 1650lm - 15000lm Size 4, 5, 7
Accentuation Emphasis of objects or architectural elements produced by a narrow beam.
Adjustable uplights Very narrow to wide beam, rotationally symmetrical light distribution for accent lighting.
Low- voltage halogen lamps 50W 1250lm Size 5 High- pressure discharge lamps 20W - 35W 1650lm - 3900lm Size 5, 7
Orientation lighting Points of light for providing orientation points and lines.
1018
ERCO Program 2012
Uplights Very wide beam, rotationally symmetrical light distribution for accent lighting.
High- pressure discharge lamps 20W - 150W 1650lm - 15000lm Size 4, 5, 7
Directional luminaires Narrow to wide beam, rotationally symmetrical light distribution for accent lighting.
High- pressure discharge lamps 20W - 150W 1650lm - 15000lm Size 4, 5, 7
In- ground luminaires Wide beam, rotationally symmetrical light distribution for orientation.
LED 9W - 12W 580lm - 720lm Size 5 Optional: DALI, varychrome
www.erco.com
Tesis IP68 In- ground luminaires Wallwashing Vertical illuminance for brightening the surroundings and dividing the outside.
Focal wallwashers Asymmetrical light distribution for faรงade lighting with focal emphasis in the lower area.
High- pressure discharge lamps 20W - 70W 1800lm - 7750lm Size 5, 7
Lens wallwashers Asymmetrical light distribution for highly uniform wallwashing.
LED 27W 1740lm - 2160lm Size 5 Optional: DALI High- pressure discharge lamps 20W - 70W 1800lm - 7750lm Size 5, 7
Wallwashers Asymmetrical light distribution for highly uniform wallwashing with light spread from directly above the ground.
High- pressure discharge lamps 35W - 70W 3900lm - 7750lm Size 5, 7
Accentuation Emphasis of objects or architectural elements produced by a narrow beam.
Directional luminaires Narrow to wide beam, rotationally symmetrical light distribution for accent lighting.
High- pressure discharge lamps 20W - 150W 1800lm - 15000lm Size 5, 7
Orientation lighting Points of light for providing orientation points and lines.
In- ground luminaires Wide beam, rotationally symmetrical light distribution for orientation.
LED 12W 375lm Size 5 Optional: DALI, varychrome
www.erco.com
ERCO Program 2012
1019
Tesis IP68 In- ground luminaires Producing diffusely lit areas on the ground, Tesis varychrome in- ground luminaires are genuine eye- catchers. They assume the task of directive lighting, for example by marking pathways or highlighting entrances.
Tesis adjustable uplights for precise grazing light on façades or objects – for minimised installation depth.
1020
ERCO Program 2012
The DALI- compatible lumi naires have digital control gear which allows each luminaire to be individually addressed, for example by using the ERCO Light System DALI with integral ERCO Light Studio software.
Tesis adjustable uplights combine high visual comfort and a particularly shallow installation depth. To enable precisely placed grazing light on façades – despite any inaccuracy when installing in the ground – the uplights’ narrow light beam can be adjusted by a few degrees tilt.
The LED lens wallwashers in warm white and neutral white excel due to exceptionally high efficiency. Their long lifespan makes them the perfect lamp for low- maintenance operation in outdoor areas.
Uplights in Darklight reflector technology for light which grazes the façades or illuminates the eaves of the building.
Tesis directional luminaires for accentuating architectural objects, shrubbery or building details.
Orientation luminaires for marking out routes and to identify architectural lines.
LED heat management Like other lamps, high- power LEDs generate heat. To prevent the luminous flux and life of the lamp from decreasing drastically, the maximum junction temperature must not be exceeded even during continuous operation. ERCO places particular importance on heat management in its luminaires to ensure that the LED modules remain below the critical temperature range and
operate at full output throughout their lives. Mounting the LED module directly on metal- core PCBs effectively dissipates the heat to the luminaire housing. Extensive simulations and tests in the development phase ensure the success of the production procedures used.
www.erco.com
Tesis IP68 In- ground luminaires Focal wallwashers The Tesis focal wallwasher produces an area of focal emphasis on vertical surfaces. At the same time, the higher illuminance levels in the lower area allow a building’s plinth to be accentuated and enable a soft transition to be achieved for other façade lighting. No direct glare from the lamp arises within the 90° cut- off angle. The luminance is clearly perceptible on the luminaire cover and diffuser. The reflector lens system allows the beam to meet the wall just above the floor line.
The focal wallwasher requires an offset from the wall of one third of the wall height. The recommended ratio of luminaire spacing to wall offset is 1:1.5.
Lens wallwashers The Tesis lens wallwasher is ideal for a highly uniform brightness distribution across a façade. The Darklight technology prevents the eye from being dazzled, either by the lamp or by reflections in the reflector, as long as it remains within the scope of the 40° cutoff angle. Here, too, the beam produced by the reflector lens system intersects the wall just above the floor level.
The lens wallwasher is suitable for ratios of luminaire spacing to wall offset of up to 1:1.25.
Wallwashers The Tesis wallwasher produces the highest uniformity on walls. Its cut- off angle of 90° establishes the basic requirement for high visual comfort. In contrast to the recessed floor luminaires, part of the lighting technology of the Tesis wallwasher protrudes above the floor surface. This permits a special light distribution, whereby the beam cast on the façade starts immediately above the floor. The wallwasher’s cover glass remains hidden from view. The reflector technology is noted for its very high light output ratio.
The optimum offset from the wall for the wallwasher is half of the wall height. The luminaire spacing can be set at up to 1.25 times the offset from the wall.
Installation information IP68 ERCO luminaires rated to protection mode IP68 are suitable for operation in both outdoor and indoor environments. According to VDE 0100, Part 702, operation of these luminaires in ponds or pools, e.g. swimming pools or fountains, and in the surrounding 2m zone is not permitted. The installation must comply with all relevant local regulations.
www.erco.com
A junction box rated protection mode IP68 is available for the efficient throughwiring of a row of luminaires.
ERCO Program 2012
1021
Tesis In-ground luminaire Lens wallwasher with LED Size 5 40°
Weight 5.90kg LMF E I0qp koo3mIP68
d227
Weight 5.90kg LMF E I0qp koo3mIP68
LED
d227
33662.000 Reflector silver DALI LED 27W 2160lm 4000K neutral white Version 4 Temperature on the light aperture 38°C
Weight 6.10kg LMF E 0qp koo3mIP68
LED
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated black . Mounting by means of swing bolts. Clamp range 5-40mm. DALI control gear, with plug and play connectivity. Cable, 5x1.5mm2 , L 1m. LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Wallwasher lens. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 40°. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load: 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection
d227
Weight 6.10kg LMF E 0qp koo3mIP68
d227
1022
ERCO Program 2012
LED Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 1.00 1.00 1.25 1.25 Luminaire spacing (m) 1.00 1.25 1.25 1.75 94 76 63 46 Illuminance En (lx)
d247
365
33664.000 Reflector silver DALI LED 27W 1740lm 3000K warm white Version 4 Temperature on the light aperture 38°C
against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 1.00 1.00 1.25 1.25 Luminaire spacing (m) 1.00 1.25 1.25 1.75 116 94 79 57 Illuminance En (lx)
d247
365
Size 5 40°
DALI PLUG+ PLAY
Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 1.00 1.00 1.25 1.25 Luminaire spacing (m) 1.00 1.25 1.25 1.75 94 76 63 46 Illuminance En (lx)
d247
365
33663.000 Reflector silver LED 27W 1740lm 3000K warm white Version 4 Temperature on the light aperture 38°C
against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 1.00 1.00 1.25 1.25 Luminaire spacing (m) 1.00 1.25 1.25 1.75 116 94 79 57 Illuminance En (lx)
d247
365
33661.000 Reflector silver LED 27W 2160lm 4000K neutral white Version 4 Temperature on the light aperture 38°C
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated black. Mounting by means of swing bolts. Clamp range 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Wallwasher lens. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 40°. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load: 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection
LED
www.erco.com
Tesis In-ground luminaire Lens wallwasher for metal halide lamps Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Lampholder carrier, 360° rotation. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Wallwasher reflector: aluminium, silver anodised. Darklight reflector: aluminium, silver, bright anodised, with wallwasher lens. Cut-off angle 40°. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection
Size 4 40°
Weight 3.10kg LMF E 0qp koo3mIP68
d200
d227
against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.25 1.25 1.50 1.50 Luminaire spacing (m) 1.25 1.50 1.50 1.75 210 176 148 127 Illuminance En (lx)
d247
365
Weight 6.30kg LMF E I0q6p koo3mIP68
HIT-TC-CE
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Lampholder carrier, 360° rotation. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Wallwasher reflector: Aluminium, silver anodised. Darklight reflector: aluminium, silver, bright anodised, with wallwasher lens. Cut-off angle 40°. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection
Size 5 40°
33715.000 Reflector silver ECG HIT-TC-CE 35W G8.5 3900lm Temperature on the light aperture 65°C
Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 1.00 1.00 1.25 1.25 Luminaire spacing (m) 1.00 1.25 1.25 1.50 118 95 72 60 Illuminance En (lx)
d219
225
33704.000 Reflector silver ECG HIT-TC-CE 20W PGJ5 1650lm Temperature on the light aperture 55°C
against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
HIT-TC-CE
Shanghai EXPO - German Pavilion, Shanghai. Architect: Schmidhuber + Kaindl GmbH, Munich. Lighting design: E3 Ingenieurgesellschaft mbH, Altenbeken; Thomas Roscher, Bonn. Exhibition and media design: Milla und Partner GmbH, Stuttgart. Execution and project management: Nüssli (Deutschland) GmbH, Roth.
www.erco.com
ERCO Program 2012
1023
Tesis In-ground luminaire Lens wallwasher for metal halide lamps
33723.000 Reflector silver ECG HIT-CE 70W G12 7750lm Temperature on the light aperture 60°C
Weight 9.00kg LMF E 0q6p koo3mIP68
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Lampholder carrier, 360° rotation. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Wallwasher reflector: Aluminium, silver anodised. Darklight reflector: aluminium, silver, bright anodised, with wallwasher lens. Cut-off angle 40°. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection
d277
Weight 9.00kg LMF E 0qp koo3mIP68
HIT-CE Mean illuminance En (wall) Wall height (m) 10.0 Offset from wall (m) 2.50 2.50 3.50 3.50 Luminaire spacing (m) 2.50 3.00 3.50 4.50 179 151 100 79 Illuminance En (lx)
d297
410
33729.000 Reflector silver ECG HIT-CE 150W G12 15000lm Use lamp with cylindrical discharge tube. Temperature on the light aperture 105°C
against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
Mean illuminance En (wall) Wall height (m) 6.0 Offset from wall (m) 1.75 1.75 2.00 2.00 Luminaire spacing (m) 1.75 2.00 2.00 2.50 169 149 134 108 Illuminance En (lx)
d297
410
Size 7 40°
d277
HIT-CE
Tesis In-ground luminaire Adjustable uplight for low-voltage halogen lamps Size 5 Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 5-40mm. Safety transformer, 230/12V. Cable 3x1.5mm2 , L 1m. High Beam reflector: aluminium, silver anodised, mirror-finish. Cut-off angle 80°. Anti-glare element: metal. Beam adjustable up to 15°. Without spill light. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. Weight 5.00kg LMF E I56p koo3mIP68
d247
d227
1024
ERCO Program 2012
150°
20000 cd
h(m)
120°
QT12-ax-RE
E(lx)
150°
150
33710.000 Reflector silver QT12-ax-RE 50W 12V GY6.35 1250lm Temperature on the light aperture 90°C
On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
120°
10 8 6 4 2
161 252 447 1007 4027
D(m) 7° 1.22 0.98 0.73 0.49 0.24
www.erco.com
Tesis In-ground luminaire Adjustable uplight for metal halide lamps Size 5 Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. High Beam reflector: aluminium, silver anodised, mirror-finish. Cut-off angle 80°. Anti-glare element: metal. Beam adjustable up to 15°. Without spill light. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. Weight 3.60kg LMF E 0qp koo3mIP68
∅ 247 466666666 3
150°
120°
∅ 227 26666666 1
h(m)
Weight 5.30kg LMF E 0q6p koo3mIP68
d297
120°
10 8 6 4 2
298 465 827 1860 7441
D(m) 6° 1.05 0.84 0.63 0.42 0.21
On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
50000 cd
h(m) 150°
175
150°
120°
d277
E(lx)
150°
HIT-TC-CE
Size 7 Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. High Beam reflector: aluminium, silver anodised, mirror-finish. Cut-off angle 80°. Anti-glare element: metal. Beam adjustable up to 15°. Without spill light. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. 33711.000 Reflector silver ECG HIT-TC-CE 35W G8.5 3900lm Temperature on the light aperture 65°C
30000 cd
150 46666 3
33706.000 Reflector silver ECG HIT-TC-CE 20W PGJ5 1650lm Temperature on the light aperture 55°C
On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
120°
HIT-TC-CE
10 8 6 4 2
E(lx) D(m) 7° 426 1.22 666 0.98 1185 0.73 2666 0.49 10662 0.24
Tesis In-ground luminaire Uplight for metal halide lamps
33702.000 Reflector silver ECG HIT-TC-CE 20W PGJ5 1650lm Temperature on the light aperture 55°C
Weight 3.10kg LMF E 0qp koo3mIP68
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 40°. Diffuser: glass, frosted. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN. d219
d200
www.erco.com
Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
150°
2000 cd
h(m)
120°
HIT-TC-CE
E(lx)
150°
225
Size 4 40°
120°
5 4 3 2 1
57 89 158 354 1418
ERCO Program 2012
D(m) 40° 3.64 2.91 2.18 1.46 0.73
1025
Tesis In-ground luminaire Uplight for metal halide lamps Size 5 50°
Weight 6.00kg LMF E I0q6p koo3mIP68
d247
150°
Size 7 50°
h(m)
Weight 8.70kg LMF E 0q6p koo3mIP68
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 50°. Diffuser: glass, frosted. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN. d297
120°
150°
12500 cd
120°
h(m)
120°
22000 cd
120°
E(lx)
5 4 3 2 1 h(m)
378 590 1050 2362 9446 E(lx)
150°
410
150°
d277
115 180 320 719 2876
150°
HIT-CE
d297
5 4 3 2 1
D(m) 50° 4.66 3.73 2.80 1.87 0.93
Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
410
Weight 8.70kg LMF E 0qp koo3mIP68
E(lx)
150°
HIT-TC-CE
d277
33709.000 Reflector silver ECG HIT-CE 150W G12 15000lm Use lamp with cylindrical discharge tube. Temperature on the light aperture 105°C
3000 cd
120°
d227
33721.000 Reflector silver ECG HIT-CE 70W G12 7750lm Temperature on the light aperture 65°C
Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
365
33713.000 Reflector silver ECG HIT-TC-CE 35W G8.5 3900lm Temperature on the light aperture 60°C
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 50°. Diffuser: glass, frosted. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN.
120°
HIT-CE
10 8 6 4 2
197 308 547 1231 4926
D(m) 32° 2.87 2.29 1.72 1.15 0.57 D(m) 32° 5.73 4.59 3.44 2.29 1.15
Tesis In-ground luminaire Directional luminaire for metal halide lamps
33703.000 Reflector silver ECG HIT-TC-CE 20W PGJ5 1650lm Temperature on the light aperture 55°C
Weight 3.10kg LMF E 0qp koo3mIP68
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Lampholder carrier, 0°-35° tilt, 360° rotation. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Spot reflector: aluminium, silver anodised. Softec lens. Darklight reflector: aluminium, silver anodised. Cut-off angle 40°. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection ∅ 219 3666666 4
200 2∅666 1
1026
ERCO Program 2012
against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
150°
10000 cd
h(m)
120°
HIT-TC-CE
E(lx)
150°
225 4666 3
Size 4 40°
120°
5 4 3 2 1
267 417 742 1669 6674
D(m) 18° 1.58 1.27 0.95 0.63 0.32
www.erco.com
Tesis In-ground luminaire Directional luminaire for metal halide lamps Size 5 40°
Weight 6.30kg LMF E I0q6p koo3mIP68
d247
150°
20000 cd
120°
d227
h(m) 150°
Weight 6.30kg LMF E I0q6p koo3mIP68
120°
HIT-TC-CE
d247
150°
25000 cd
120°
d227
h(m)
120°
HIPAR20 150°
6000 cd
120°
h(m)
120°
Weight 9.00kg LMF E 0q6p koo3mIP68
d297
150°
www.erco.com
Weight 9.00kg LMF E 0qp koo3mIP68
h(m)
120°
HIT-CE
d297
d277
150°
120°
HIT-CE
5 4 3 2 1
150°
55000 cd
5 4 3 2 1 h(m)
150°
410
33739.000 Reflector silver ECG HIT-CE 150W G12 15000lm Use lamp with cylindrical discharge tube. Temperature on the light aperture 105°C
40000 cd
120°
d277
E(lx) D(m) 10° 836 0.87 1307 0.70 2323 0.52 5228 0.35 20910 0.17 E(lx) 182 284 505 1136 4545
D(m) 30° 2.68 2.14 1.61 1.07 0.54
against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
410
33725.000 Reflector silver ECG HIT-CE 70W G12 7750lm Temperature on the light aperture 70°C
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Lampholder carrier, 0°-20° tilt, 360° rotation. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Spot reflector: Aluminium, silver anodised. Glass with anti-glare cap. Darklight reflector: Aluminium, silver anodised. Cut-off angle 40°. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection
5 4 3 2 1
E(lx) D(m) 12° 728 1.05 1138 0.84 2023 0.63 4552 0.42 18209 0.21
150°
HIPAR20
Size 7 40°
5 4 3 2 1
150°
365
33719.000 Reflector silver ECG HIPAR20 35W E27 10° HIPAR20 35W E27 30° Temperature on the light aperture 65°C
using a residual current circuit breaker, FI(30mA. Accessories page 1030
365
33717.000 Reflector silver ECG HIT-TC-CE 35W G8.5 3900lm Spot reflector: aluminium, silver anodised. Glass with anti-glare cap. Temperature on the light aperture 65°C
Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Lampholder carrier, 0°-20° tilt, 360° rotation. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Darklight reflector: aluminium, silver anodised. Cut-off angle 40°. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided
120°
10 8 6 4 2
E(lx) D(m) 15° 1335 1.32 2087 1.05 3710 0.79 8346 0.53 33386 0.26 E(lx) D(m) 17° 471 2.99 735 2.39 1307 1.79 2941 1.20 11763 0.60
ERCO Program 2012
1027
Tesis In-ground luminaire Directional luminaire for metal halide lamps Size 7 Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Lampholder carrier, 0°-20° tilt, 360° rotation. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Aperture mask: Aluminium, silver, bright anodised. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, clear. Can be driven over by vehicles with pneumatic tyres. Load 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. Weight 9.00kg LMF E 0q6p koo3mIP68
d297
150°
75000 cd
h(m) 150°
410
33727.000 ECG HIPAR-L30 70W E27 10° HIPAR-L30 70W E27 40° Temperature on the light aperture 80°C
On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
120°
d277
120°
HIPAR-L30 150°
120°
HIPAR-L30
12500 cd
5 4 3 2 1 h(m)
E(lx) D(m) 10° 0.87 0.70 0.52 0.35 0.17
2473 3864 6869 15455 61818 E(lx)
150°
120°
5 4 3 2 1
364 568 1010 2273 9091
D(m) 30° 2.68 2.14 1.61 1.07 0.54
Tesis In-ground luminaire with LED Size 5 Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 5-40mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. LED module: high-power LEDs on metal-core PCB. Screw-fastened cover ring with flush safety glass: corrosion resistant stainless steel. Safety glass: 12mm, white enamelled. Can be driven over by vehicles with pneumatic tyres. Load 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided Weight 3.60kg I0qp koo3mIP68
d247 150
33707.000 LED 9W 720lm 4000K neutral white Version 4 Temperature on the light aperture 35°C
d227
Weight 3.60kg I0qp koo3mIP68
d247
d227
1028
ERCO Program 2012
LED
150
33669.000 LED 9W 580lm 3000K warm white Version 4 Temperature on the light aperture 35°C
using a residual current circuit breaker, FI(30mA. Accessories page 1030
LED
www.erco.com
Tesis In-ground luminaire RGB varychrome with LED
33708.000 DALI LED 12W 375lm red, green, blue Version 2 Colour compensation for precise light colour. Temperature on the light aperture 30째C
Weight 4.80kg 0qp koo3mIP68
against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1030
d247 150
DALI PLUG+ PLAY
Size 5 Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 5-40mm. Cable, 5x1.5mm2 , L 1m. DALI control gear, with plug and play connectivity for ERCO RGB varychrome colour mixing. LED module: high-power LEDs on metal-core PCB. Screw-fastened cover ring with flush safety glass: corrosion-resistant stainless steel. Safety glass: 12mm, white enamelled. Can be driven over by vehicles with pneumatic tyres. Load 40kN. Only to be used with recessed housing. Installation with separate connection sleeve. Protection mode IP68 3m: protection
d227
Primary colours LED module Colour F(lm) l(nm) Red 135 620-625 Green 180 525-530 Blue 60 465-470
LED
S(%) 97 77 97
The square Tesis models have been completely redesigned with the emphasis on different wallwasher characteristics.
www.erco.com
ERCO Program 2012
1029
33
95 3 3 0 .0 95 00 7 4 1 .0 47 00 8 3 3 .0 92 00 8 3 7 .0 99 00 8 3 2 .0 99 00 8 .0 74 00 47 1 .0 00 83 92 9 .0 00 83 98 5 .0 00 83 99 3 .0 00 74 46 8 .0 00 83 92 8 .0 00 83 98 6 .0 00 83 99 4 .0 00 34 97 4 .0 00 33 95 8 .0 00 33 95 9 .0 00 33 73 4 .0 00 33 96 2 .0 00 33 96 3 .0 00
Tesis IP68 Accessories
33952.000 33953.000 Sculpture lens
ERCO Program 2012
74473.000 83927.000 Sculpture lens
•
83992.000 83998.000 Sculpture lens
• • • • • •
• • • • •
33956.000 33957.000 74471.000 83929.000 Skintone filter
83985.000 83993.000 Skintone filter
•
00
• • • • • •
96
• • • • • •
• • • •
1.0
00
• • • • • •
• • •
• • • •
33
95
0.0
00
00 8.0
00 95
4.0
00 97
82
•
33
•
9.0
00 5.0
83
00 4.0
00 95 33
95
•
33
•
7.0
00 6.0
33
00 95 33
95
•
•
33
•
•
• • • • • • • • • • • • • • • • • •
34
•
•
•
3.0
00 2.0
33
95
1.0 33
95
0.0 95
1030
•
•
•
•
•
00
•
33
33950.000 33951.000 Domed glass Cannot be driven over by vehicles. To prevent accumulation of dirt. Load: 5kN.
•
•
• •
•
•
95
•
33
• • • • • •
•
•
33
•
• • • • • • • • • • • • • • • • • •
96
•
• • • •
33669.000 33706.000 33707.000 33708.000 33710.000 33711.000
• • • • • • • • • • • • • • • • • •
9.0
• • • •
00
33661.000 33662.000 33663.000 33664.000 33702.000 33703.000 33704.000 33709.000 33713.000 33715.000 33717.000 33719.000 33721.000 33723.000 33725.000 33727.000 33729.000 33739.000
•
33954.000 33955.000 74468.000 83928.000 Daylight conversion filter
83986.000 83994.000 Daylight conversion filter
www.erco.com
90 4666666 3 45 466 3
∅ 237 366666 4 ∅ 244
66661
58
∅ 350 466666 3
466663 46663
6661
2
∅ 406 4666666 3
33961.000 Housing for recessed mounting Corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. 2 cable entries. Weight 3.80kg
33960.000 Housing for recessed mounting Corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. 2 cable entries. Weight 2.70kg
∅ 237 366666 4 ∅ 244
66661
∅ 340 466666 3
33734.000 Housing for recessed mounting Corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. 2 cable entries. Weight 2.90kg
2
∅ 287 3666666 4 125 3666 4 425 46666666 3
∅ 294
∅ 210 366666 4 ∅ 217 6666 1 2
125 3666 4 235 4666 3
∅ 287 3666666 4
33959.000 Branching sleeve for 8-23mm cable diameter. Plastic shell, twopart PUR cast resin. L 150mm, B 70mm, H 46mm.
33958.000 Coupling sleeve for max. 16mm cable diameter. Plastic conduit, two-part PURcast resin. ø 26mm, L 180mm.
125 3666 4 290 46666 3
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
83829.000 DALI DALI dimmer 1000W for ohmic loads, conventional and electronic transformers. Mounting on DIN rail. Weight 0.18kg
2
∅ 392 4666666 3
33962.000 Housing for recessed mounting Corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. 2 cable entries. Weight 5.80kg
∅ 294
6666 1
2
125 3666 4 470 4 3 66666666
70
125 3666 4 210 466 3
Tesis IP68 Accessories
∅ 442 46666666 3
33963.000 Housing for recessed mounting Corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. 2 cable entries. Weight 7.00kg
Tesis In-ground luminaire Focal wallwasher for metal halide lamps Size 5 Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 11-46mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Wallwasher reflector: aluminium, silver anodised. Vertical diffuser. Wallwasher lens. Screw-fastened cover frame with flush safety glass: corrosion resistant stainless steel. Safety glass: 15mm, clear. Can be driven over by vehicles with pneumatic tyres. Load: 65kN. Only to be used with recessed housing. Installation with separate junction box. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided Weight 4.80kg LMF E I0q6p koo3mIP68
Q194
Weight 4.20kg LMF E I0q6p koo3mIP68
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.50 1.75 2.00 2.00 Luminaire spacing (m) 1.75 2.00 2.25 3.00 95 75 59 45 Illuminance En (lx)
Q213
Q194
www.erco.com
HIT-TC-CE
150
33675.000 Reflector silver ECG HIT-TC-CE 35W G8.5 3900lm Temperature on the light aperture 60°C
Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 1.00 1.25 1.50 1.50 Luminaire spacing (m) 1.25 1.50 1.75 2.25 83 60 44 35 Illuminance En (lx)
Q213 150
33671.000 Reflector silver ECG HIT-TC-CE 20W G8.5 1800lm Temperature on the light aperture 46°C
using a residual current circuit breaker, FI(30mA. Accessories page 1037
HIT-TC-CE
ERCO Program 2012
1031
Tesis In-ground luminaire Focal wallwasher for metal halide lamps Size 7 Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 11-46mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Wallwasher reflector: aluminium, silver anodised. Vertical diffuser. Wallwasher lens. Screw-fastened cover frame with flush safety glass: corrosion resistant stainless steel. Safety glass: 15mm, clear. Can be driven over by vehicles with pneumatic tyres. Load: 65kN. Only to be used with recessed housing. Installation with separate junction box. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided Weight 6.10kg LMF E I0qp koo3mIP68
Mean illuminance En (wall) Wall height (m) 6.0 Offset from wall (m) 2.00 2.50 3.00 3.00 Luminaire spacing (m) 2.25 3.00 3.50 4.50 115 79 61 48 Illuminance En (lx)
Q260
290
33682.000 Reflector silver ECG HIT-CE 70W G12 7750lm Temperature on the light aperture 72°C
Q241
using a residual current circuit breaker, FI(30mA. Accessories page 1037
HIT-CE
Tesis In-ground luminaire Lens wallwasher with LED Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated black. Mounting by means of swing bolts. Clamp range 11-46mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Wallwasher lens. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 40°. Screw-fastened cover frame with flush safety glass: corrosion resistant stainless steel. Safety glass: 15mm, clear. Can be driven over by vehicles with pneumatic tyres. Load: 65kN. Only to be used with recessed housing. Installation with separate junction box. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep.
Size 5 40°
Weight 5.20kg LMF E I0qp koo3mIP68
Q194
Weight 5.20kg LMF E I0qp koo3mIP68
Q194
1032
ERCO Program 2012
LED Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.00 1.25 1.25 1.25 Luminaire spacing (m) 1.25 1.00 1.25 1.75 107 118 98 72 Illuminance En (lx)
Q213
261
33667.000 Reflector silver LED 27W 1740lm 3000K warm white Version 4 Temperature on the light aperture 38°C
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.00 1.00 1.25 1.25 Luminaire spacing (m) 1.25 1.50 1.25 1.75 133 112 122 89 Illuminance En (lx)
Q213
261
33665.000 Reflector silver LED 27W 2160lm 4000K neutral white Version 4 Temperature on the light aperture 38°C
On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1037
LED
www.erco.com
Tesis In-ground luminaire Lens wallwasher with LED Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Double powder-coated black. Mounting by means of swing bolts. Clamp range 11-46mm. DALI control gear, with plug and play connectivity. Cable, 5x1.5mm2 , L 1m. LED module: high-power LEDs on metal-core PCB. Reflector for mixing light: aluminium, silver, mirror-finish anodised. Wallwasher lens. Darklight reflector: aluminium, silver, bright anodised. Cut-off angle 40°. Screw-fastened cover frame with flush safety glass: corrosion resistant stainless steel. Safety glass: 15mm, clear. Can be driven over by vehicles with pneumatic tyres. Load: 65kN. Only to be used with recessed housing. Installation with separate junction box. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep.
Size 5 40°
DALI PLUG+ PLAY
Weight 5.20kg LMF E 0qp koo3mIP68
Q194
Weight 5.20kg LMF E 0qp koo3mIP68
LED Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.00 1.25 1.25 1.25 Luminaire spacing (m) 1.25 1.00 1.25 1.75 107 118 98 72 Illuminance En (lx)
Q213
261
33668.000 Reflector silver DALI LED 27W 1740lm 3000K warm white Version 4 Temperature on the light aperture 38°C
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.00 1.00 1.25 1.25 Luminaire spacing (m) 1.25 1.50 1.25 1.75 133 112 122 89 Illuminance En (lx)
Q213
261
33666.000 Reflector silver DALI LED 27W 2160lm 4000K neutral white Version 4 Temperature on the light aperture 38°C
Q194
On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1037
LED
Tesis In-ground luminaire Lens wallwasher for metal halide lamps Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 11-46mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Wallwasher reflector: aluminium, silver anodised. Wallwasher lens. Darklight reflector: Aluminium, silver, bright anodised. Cut-off angle 40°. Screw-fastened cover frame with flush safety glass: corrosion resistant stainless steel. Safety glass: 15mm, clear. Can be driven over by vehicles with pneumatic tyres. Load: 65kN. Only to be used with recessed housing. Installation with separate junction box. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided
Size 5 40°
Weight 4.80kg LMF E I0q6p koo3mIP68
Q194
Weight 4.20kg LMF E I0q6p koo3mIP68
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.50 1.50 1.75 1.75 Luminaire spacing (m) 1.50 1.75 1.75 2.50 172 150 132 95 Illuminance En (lx)
Q213
Q194
www.erco.com
HIT-TC-CE
150
33677.000 Reflector silver ECG HIT-TC-CE 35W G8.5 3900lm Temperature on the light aperture 70°C
Mean illuminance En (wall) Wall height (m) 3.0 Offset from wall (m) 1.00 1.00 1.25 1.25 Luminaire spacing (m) 1.00 1.25 1.25 1.75 160 131 112 82 Illuminance En (lx)
Q213 150
33672.000 Reflector silver ECG HIT-TC-CE 20W G8.5 1800lm Temperature on the light aperture 50°C
using a residual current circuit breaker, FI(30mA. Accessories page 1037
HIT-TC-CE
ERCO Program 2012
1033
Tesis In-ground luminaire Lens wallwasher for metal halide lamps Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 11-46mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Wallwasher reflector: aluminium, silver anodised. Wallwasher lens. Darklight reflector: Aluminium, silver, bright anodised. Cut-off angle 40°. Screw-fastened cover frame with flush safety glass: corrosion resistant stainless steel. Safety glass: 15mm, clear. Can be driven over by vehicles with pneumatic tyres. Load: 65kN. Only to be used with recessed housing. Installation with separate junction box. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided
Size 7 40°
Weight 6.50kg LMF E I0qp koo3mIP68
Mean illuminance En (wall) Wall height (m) 6.0 Offset from wall (m) 1.75 1.75 2.00 2.00 Luminaire spacing (m) 1.75 2.00 2.00 3.00 283 252 234 161 Illuminance En (lx)
Q260
290
33685.000 Reflector silver ECG HIT-CE 70W G12 7750lm Temperature on the light aperture 75°C
using a residual current circuit breaker, FI(30mA. Accessories page 1037
Q241
HIT-CE
Tesis In-ground luminaire Wallwasher for metal halide lamps Size 5 Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 11-46mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Wallwasher reflector: aluminium, silver anodised. Surface mounting: luminaire attachment with Softec lens as safety glass: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Not to be driven over. Only to be used with recessed housing. Installation with separate junction box. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided
Q194
1034
ERCO Program 2012
Mean illuminance En (wall) Wall height (m) 4.0 Offset from wall (m) 1.75 1.75 2.00 2.00 Luminaire spacing (m) 1.75 2.25 2.00 3.00 215 167 175 117 Illuminance En (lx)
Q213
153
Weight 3.40kg LMF E I0q6p koo3mIP68
242
33689.000 Reflector silver ECG HIT-TC-CE 35W G8.5 3900lm Housing temperature 46°C Temperature on the light aperture 64°C
using a residual current circuit breaker, FI(30mA. Accessories page 1037
HIT-TC-CE
www.erco.com
Tesis In-ground luminaire Wallwasher for metal halide lamps Size 7 Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 11-46mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Wallwasher reflector: aluminium, silver anodised. Surface mounting: luminaire attachment with Softec lens as safety glass: corrosion-resistant cast aluminium, No-Rinse surface treatment. Graphit m, double powder-coated. Not to be driven over. Only to be used with recessed housing. Installation with separate junction box. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided Weight 5.00kg LMF E I0qp koo3mIP68
Mean illuminance En (wall) Wall height (m) 6.0 Offset from wall (m) 2.50 2.50 3.00 3.00 Luminaire spacing (m) 2.50 3.00 3.00 4.00 202 168 150 112 Illuminance En (lx)
Q260
153
266
33691.000 Reflector silver ECG HIT-CE 70W G12 7750lm Housing temperature 50°C Temperature on the light aperture 80°C
Q241
using a residual current circuit breaker, FI(30mA. Accessories page 1037
HIT-CE
Tesis In-ground luminaire Directional luminaire for metal halide lamps Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Lampholder carrier, 0°-20° tilt, 180° rotation. Mounting by means of a swing bolt. Clamp extension 11-46mm. Electronic control gear. Cable 3x1.5mm2 , L 1m. Spot reflector: aluminium, silver anodised. Bracket with anti-glare cap. Darklight reflector: aluminium, silver anodised. Cut-off angle 30°. Screw-fastened cover frame with flush safety glass: corrosion resistant stainless steel. Safety glass: 15mm, clear. Can be driven over by vehicles with pneumatic tyres. Load: 65kN. Only to be used with recessed housing. Installation with separate junction box. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided
Size 5 30°
Weight 4.80kg LMF E I0q6p koo3mIP68
Q 213 36666666 4
Q 194 26666 1
Weight 4.80kg LMF E I0q6p koo3mIP68
www.erco.com
120°
Q 213 36666666 4
Q 194 26666 1
8000 cd
h(m)
150°
120°
120°
HIT-TC-CE
12000 cd
E(lx)
150°
HIT-TC-CE
261 466666 3
33673.000 Reflector silver ECG HIT-TC-CE 35W G8.5 3900lm Temperature on the light aperture 60°C
150°
261 466666 3
33670.000 Reflector silver ECG HIT-TC-CE 20W G8.5 1800lm Temperature on the light aperture 47°C
using a residual current circuit breaker, FI(30mA. Accessories page 1037
5 4 3 2 1
231 361 642 1444 5776
h(m)
E(lx) D(m) 13° 427 1.14 668 0.91 1187 0.68 2672 0.46 10686 0.23
150°
120°
D(m) 16° 1.41 1.12 0.84 0.56 0.28
5 4 3 2 1
ERCO Program 2012
1035
Tesis In-ground luminaire Directional luminaire for metal halide lamps Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Connection cable, L 1m. Lampholder carrier, 0°-20° tilt, 180° rotation. Mounting by means of a swing bolt. Clamp extension 11-46mm. Separate control gear: cast aluminium, powder-coated black. Electronic control gear. 1 cable entry. 5-pole terminal block. Through-wiring with 25mm cable gland (not supplied). Spot reflector: aluminium, silver anodised. Bracket with anti-glare cap. Darklight reflector: aluminium, silver anodised. Cut-off angle 30°. Screw-fastened cover frame with flush safety glass: corrosion resistant stainless steel. Safety glass: 15mm, clear. Can be driven over by vehicles with pneumatic tyres. Load: 65kN. Only to be used with recessed housing. Protection mode IP68 3m: protection
Weight 7.30kg LMF E I0qp koo3mIP68
Q 260 4666666 3
150°
195
h(m) 150°
120°
120°
HIT-CE
Q 260 4666666 3
150°
195
50000 cd
466663 120°
Q 241 266666 1
HIT-CE
120°
E(lx) D(m) 12° 1.05 0.84 0.63 0.42 0.21
5 4 3 2 1
1078 1684 2993 6735 26940
h(m)
E(lx) D(m) 13° 1690 1.14 2641 0.91 4696 0.68 10566 0.46 42262 0.23
150°
489 63
290 4666666 3
Weight 7.70kg LMF E I0qp koo3mIP68
32000 cd
466663 Q 241 266666 1
33688.000 Reflector silver ECG HIT-CE 150W G12 15000lm Temperature on the light aperture 90°C
against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1037
489 63
33679.000 Reflector silver ECG HIT-CE 70W G12 7750lm Temperature on the light aperture 61°C
290 4666666 3
Size 7 30°
5 4 3 2 1
Tesis In-ground luminaire RGB varychrome with LED Size 5 Housing: corrosion-resistant cast aluminium, No-Rinse surface treatment. Black double powder-coated. Mounting by means of a swing bolt. Clamp extension 11-46mm. Cable, 5x1.5mm2 , L 1m. DALI control gear, with plug and play connectivity for ERCO RGB varychrome colour mixing. LED module: high-power LEDs on metal-core PCB. Screw-fastened cover frame with flush safety glass: corrosion resistant stainless steel. Safety glass: 15mm, white enamelled. Can be driven over by vehicles with pneumatic tyres. Load: 65kN. Only to be used with recessed housing. Installation with separate junction box. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep.
DALI PLUG+ PLAY
Q 213 36666666 4
46663
Weight 4.10kg 0qp koo3mIP68
150
33698.000 DALI LED 12W 375lm red, green, blue Version 2 Colour compensation for precise light colour. Temperature on the light aperture 30°C
Q 194 26666 1
Primary colours LED module Colour F(lm) l(nm) Red 135 620-625 Green 180 525-530 Blue 60 465-470
1036
ERCO Program 2012
On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1037
LED
S(%) 97 77 97
www.erco.com
•
• •
• •
• •
•
00
• • • •
00 5.0 69
33
69
4.0
00
•
00
7 .0
00
•
• •
9.0
69
69
• • • • •
• •
95
8.0 95
4.0 97
9.0 69
6 .0
00
• •
33
•
33
• •
33 33
• •
69
4 .0
00 9 .0
00 95 33
• • • • • • • • • •
00 33
95
8 .0
00 4 .0
• • • • • • • • • •
00
33 33
33689.000 33691.000
•
• • • • • • • • • • • • • • •
00
34
97
• • • • • • • • • • • •
34
33
33665.000 33666.000 33667.000 33668.000 33670.000 33671.000 33672.000 33673.000 33675.000 33677.000 33679.000 33682.000 33685.000 33688.000 33698.000
33
69
9 .0
00
Tesis IP68 Accessories
•
Färdig Betong Conference Centre, Mörrum. Architect: Anders Törnqvist Arkitektkontor AB, Karlshamn.
www.erco.com
ERCO Program 2012
1037
Tesis IP68 Accessories Q 203
33699.000 Junction box Cast aluminium, powder-coated black. 2 screwed cable glands for cable diameters of 5-14mm. 2x20mm, 2x25mm cable glands can be fitted on site (not supplied). Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. Weight 1.20kg koo3mIP68
210 4666 3 Q 340 466666 3
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
33958.000 Coupling sleeve for max. 16mm cable diameter. Plastic conduit, two-part PURcast resin. ø 26mm, L 180mm.
210 4666 3
390 4666666 3
4663
Q 395 46666666 3
33695.000 Housing for recessed mounting Corrosion-resistant aluminium, NoRinse surface treatment. Black double powder-coated. 2 cable entries. Not for junction box 33699. Weight 3.20kg
33694.000 Housing for recessed mounting Corrosion-resistant aluminium, NoRinse surface treatment. Black double powder-coated. 2 cable entries. Not for junction box 33699. Weight 2.60kg
Q 250 4666 3
Q 203
Q 250 4666 3
33959.000 Branching sleeve for 8-23mm cable diameter. Plastic shell, twopart PUR cast resin. L 150mm, B 70mm, H 46mm.
Q 380 4666666 3
33696.000 Housing for recessed mounting Corrosion-resistant aluminium, NoRinse surface treatment. Black double powder-coated. 2 cable entries. Weight 4.80kg
390 4666666 3
4140 663
89 3666 4
218 46666 3
4663
Q 400 46666666 3
33697.000 Housing for recessed mounting Corrosion-resistant aluminium, NoRinse surface treatment. Black double powder-coated. 2 cable entries. Weight 5.50kg
COR Interlübke works exhibition, Rheda-Wiedenbrück. Architect: kräling+lübke, Hamburg. Lighting consultant: LDE Kober, Dortmund.
1038
ERCO Program 2012
www.erco.com
LED orientation luminaires IP68 As white or coloured points of light, LED orientation luminaires can mark out pathways and zones, contribute to safety in entrances and on stair treads, and identify architectural lines. Stainless steel covers and scratch- resistant glass ensure that the orientation luminaires will function as high- quality luminaires for years to come. Their special optical components make these orientation luminaires highly visible even in bright surroundings. Linking LED luminaires by means of intelligent lighting control signals is logical. For this reason, the range includes functions such as dimming and rapid and gradual flashing. This allows interesting applications in the context of safety and networked building technology.
Orientation lighting Light points used to create orientation points and lines.
Orientation luminaires Rotationally symmetrical light distribution for orientation.
LED 0.3W - 0.8W 1lm - 24lm Optional: varychrome
Washlighting Wide- beam illumination of pathways and open areas.
Floor washlights Asymmetrical light distribution for ground illumination.
LED 0.6W 17lm - 24lm
www.erco.com
ERCO Program 2012
1039
LED orientation luminaires IP68 The LED orientation luminaires IP68 are used for washlighting corridor floors and stairs or add discreet to coloured accents. As dynamic and coloured points of light, they can interact with the architecture and its users. Their special optical components make these orientation luminaires highly visible even in bright surroundings. The luminaires can be dimmed and changed in colour via DALI- compatible control gear.
Floor washlights Thanks to the powerful LEDs, the compact floor washlights can be used, for example, to discreetly illuminate corridors.
Two sizes The LED orientation luminaires are available in two sizes â&#x20AC;&#x201C; either as a small architectural detail or with higher luminous flux.
Neutral white The neutral white light colour is suitable for cool material colours.
Conductor lengths for LED orientation luminaires The length of the connection cable for monochrome LED orientation luminaires is limited to a maximum of 40m and for varychrome LED orientation luminaires to 10m. Connection of LED orientation luminaires With their approx. 0.5m long connection cable, the electrical installation is made outside the luminaires. The cable connection must therefore be performed on- site according to the protection mode applicable. The necessary control gear can supply a maximum of 40 luminaires at 12V or a maximum of 10 luminaires at 24V. LED orientation luminaires that run on mains voltage are also available.
1040
ERCO Program 2012
Warm white The warm white light colour perfectly emphasises a warm- tone environment.
Blue The blue orientation luminaires provide a discreet focal point.
Varychrome RGB Determining the colour locus of ERCO varychrome luminaires has never been so easy: simply choose the colour required from the colour wheel and check it in real time to decide if you are happy with the effect.
Neutral white The neutral white light colour accentuates cool floor coverings.
Warm white The warm white light colour is ideal for producing a warm- tone room atmosphere.
Installation information IP68 ERCO luminaires rated to protection mode IP68 are suitable for operation in both outdoor and indoor environments. According to VDE 0100, Part 702, operation of these luminaires in ponds or pools, e.g. swimming pools or fountains, and in the surrounding 2m zone is not permitted. The installation must comply with all relevant local regulations.
www.erco.com
LED orientation luminaire Housing with gasket: stainless steel. Installation bush with ribs: plastic. Cable 2x0.75mm2 , L 500mm. Clear prismatic diffuser with circular light aperture. Cover ring: corrosion resistant stainless steel, with 6mm safety glass. Load 5kN. Control gear to be ordered separately. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. Accessories page 1043
4666666 3 ∅ 41
70 46666 3
Weight 0.10kg I koo3mIP68
2 666 34
33755.000 LED 0.3W 12V DC 5lm 4000K neutral white Version 1
∅ 27 463 66666 ∅ 32
261
4666666 3 ∅ 41
70 46666 3
Weight 0.10kg I koo3mIP68
2 666 34
33754.000 LED 0.3W 12V DC 3lm 3000K warm white Version 1
LED
∅ 27 463 66666 ∅ 32
261
4666666 3 ∅ 41
70 46666 3
Weight 0.10kg I koo3mIP68
2 666 34
33756.000 LED 0.3W 12V DC 1lm blue Version 1
LED
∅ 27 463 66666 ∅ 32
261
LED
Weight 0.14kg I koo3mIP68
∅ 56 4666 3
∅ 40
6666 4663
70 46666 3
33758.000 LED 0.6W 24V DC 24lm 4000K neutral white Version 1
2 666 34
Housing with gasket: stainless steel. Installation bush with ribs: plastic. Cable 2x0.75mm2 , L 500mm. Clear prismatic diffuser with circular light aperture. Cover ring: corrosion resistant stainless steel, with 6mm safety glass. Load 5kN. Control gear to be ordered separately. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. Accessories page 1043
Weight 0.14kg I koo3mIP68
∅ 56 4666 3
∅ 40
6666 4663
LED
70 46666 3
33757.000 LED 0.6W 24V DC 17lm 3000K warm white Version 1
2 666 34
2∅66451
Weight 0.14kg I koo3mIP68
∅ 56 4666 3
∅ 40
6666 4663 2∅66451
www.erco.com
LED
70 46666 3
33759.000 LED 0.6W 24V DC 6lm blue Version 1
2 666 34
2∅66451
LED
ERCO Program 2012
1041
LED orientation luminaire
Weight 0.14kg i koo3mIP68
∅ 56 4666 3
∅ 40
6666 4663
70 46666 3
33773.000 LED 0.8W 230V AC 24lm 4000K neutral white Version 1
2 666 34
Housing with gasket: stainless steel. Installation bush with ribs: plastic. 2-core cable, L 500mm. Clear prismatic diffuser with circular light aperture. Cover ring: corrosion resistant stainless steel, with 6mm safety glass. Load 5kN. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. On site protection must be provided using a residual current circuit breaker, FI(30mA. Accessories page 1043
Weight 0.14kg i koo3mIP68
∅ 56 4666 3
∅ 40
6666 4663
LED
70 46666 3
33772.000 LED 0.8W 230V AC 17lm 3000K warm white Version 1
2 666 34
2∅66451
Weight 0.14kg i koo3mIP68
∅ 56 4666 3
∅ 40
6666 4663
LED
70 46666 3
33774.000 LED 0.8W 230V AC 6lm blue Version 1
2 666 34
2∅66451
2∅66451
LED
LED orientation luminaire RGB varychrome
Weight 0.16kg 0qpz koo3mIP68
∅ 56 4666 3
∅ 40
6666 4663 2∅66451
1042
ERCO Program 2012
against dust ingress, and continuous immersion up to 3m deep. Accessories page 1043
70 46666 3
33785.000 LED 1.5W 24V DC red, green, blue
2 666 34
Housing with gasket: stainless steel. Installation bush with ribs: plastic. Cable, 4x0.75mm2 , L 500mm. Clear prismatic diffuser with circular light aperture. Cover ring: corrosion-resistant stainless steel, with 6mm safety glass. Load: 5kN. The three LED colours red, green and blue are controlled by separate 24V DC control gear (common 24V, floating earth for PWM (Pulse Width Modulation)). Control gear to be ordered separately. Protection mode IP68 3m: protection
LED
www.erco.com
LED orientation luminaire Floor washlight Housing with gasket: stainless steel. Installation bush with ribs: plastic. Cable 2x0.75mm2 , L 500mm. Reflector: plastic, aluminium vaporised, silver, frosted. Cover ring: corrosion resistant stainless steel, with 6mm safety glass. Load 5kN. Control gear to be ordered separately. Protection mode IP68 3m: protection against dust ingress, and continuous immersion up to 3m deep. Accessories see below
56 4∅ 666 3
2 34 666
2∅66451
Weight 0.14kg I koo3mIP68
∅ 40 46663666
33753.000 Reflector silver LED 0.6W 24V DC 24lm 4000K neutral white Version 1
70 46666 3
LED
56 4∅ 666 3
2 34 666
2∅66451
Weight 0.14kg I koo3mIP68
∅ 40 46663666
33752.000 Reflector silver LED 0.6W 24V DC 17lm 3000K warm white Version 1
70 46666 3
LED
72
33775.000 Control gear for max. 40 LED orientation luminaires. Input voltage 220-240V AC, 50-60Hz, 13W max. Output voltage 12V DC SELV. Max. cable length 40m. Protection mode IP67: dust-proof and protected against the results of temporary immersion. Weight 0.56kg i kooIP67
104
72
33776.000 Control gear for max. 10 LED orientation luminaires. Input voltage 220-240V AC, 50-60Hz, 7W max. Output voltage 24V DC. Max. cable length 40m. Protection mode IP67: dust-proof and protected against the results of temporary immersion. Weight 0.56kg i kooIP67
00 6.0
00 33
87
6.0
00 7.0
89
• •
• • • • • • • • • • • •
• • • • • • •
256
• • • • • • •
• • •
33
00
• • • • • • •
89
• •
256
• •
33
89
4.0
00 3.0
00 89
6.0
00 88
• • •
33
• • • • • • •
33
88
• • •
33
• • •
5.0
00 3.0
• •
33
00 33
87
2.0
00 87 33
97
4.0
00
•
• • • • • • • • • • • •
256 104
www.erco.com
34
• • •
8.0
00
• • •
89
• •
33
79
8.0
00 6.0 77
33
• • •
• •
256
33752.000 33753.000 33754.000 33755.000 33756.000 33757.000 33758.000 33759.000 33772.000 33773.000 33774.000 33785.000
33
33
77
5.0
00
LED orientation luminaires IP68 Accessories
104
72
33798.000 DALI DALI control gear for max. 10 LED orientation luminaires. Input voltage 220-240V AC, 50-60Hz, 7W max., DALI signal. Output voltage 24V DC PWM. Max. cable length 40m. Protection mode IP67: dust-proof and protected against the results of temporary immersion. Weight 0.58kg i kooIP67
104
72
33898.000 DALI DALI control gear for 6 Nadir recessed floor luminaires, 8 Axis Walklights or 10 LED orientation luminaires maximum. Input voltage 220-240V AC, 50-60Hz, 25W max., DALI signal. Output voltage 3x24V DC PWM. Max. cable length 10m. Protection mode IP67: dust-proof and protected against the results of temporary immersion. Weight 0.58kg i kooIP67
ERCO Program 2012
1043
33893.000 Recessed housing IP67 for installation in concrete floors or compressed substrate with 25mm surface covering. Cast aluminium, double powder-coated black. 2 cable entries with IP67 threads. Through-wiring possible. 4-pole terminal block. Connection cable, L 300mm. Protection mode IP67: dust-proof and protected against the results of temporary immersion. Weight 0.70kg
180 x 138 466666666 3
33894.000 Recessed housing IP67 for installation in concrete floors or compressed natural ground with 50mm floor covering. Cast aluminium, double powder-coated black. 2 cable entries with IP67 threads. Through-wiring possible. 4-pole terminal block. Connection cable, L 300mm. Protection mode IP67: dust-proof and protected against the results of temporary immersion. Weight 0.70kg
366425666
90 4666 3 180 x 138 466666666 3
180 x 138 466666666 3
115 466666 3
36666 425
90 4666 3
50 36666 4
115 466666 3
∅ 40 366664666
∅ 40 366664666
180 x 138 466666666 3
max. 205 466666666 3
33897.000 Recessed housing IP67 for installation in concrete wall. Cast aluminium, double powder-coated black. 2 cable entries with IP67 threads. Through-wiring possible. 4-pole terminal block. Connection cable, L 300mm. Protection mode IP67: dust-proof and protected against the results of temporary immersion. Weight 0.75kg
90 4666 3 180 x 138 466666666 3
∅ 40 36664 666
33885.000 Recessed housing IP67 for installation in concrete floors or compressed substrate with 25mm surface covering. Cast aluminium, double powder-coated black. 2 cable entries with IP67 threads. Through-wiring possible. 4-pole terminal block. Connection cable, L 300mm. Protection mode IP67: dust-proof and protected against the results of temporary immersion. Weight 0.70kg ∅ 27 36664 666
33873.000 Housing for recessed mounting for mounting in plaster. Weight 0.09kg
366666 4∅ 27
33886.000 Recessed housing IP67 for installation in concrete floors or compressed natural ground with 50mm floor covering. Cast aluminium, double powder-coated black. 2 cable entries with IP67 threads. Through-wiring possible. 4-pole terminal block. Connection cable, L 300mm. Protection mode IP67: dust-proof and protected against the results of temporary immersion. Weight 0.70kg
180 x 138 466666666 3
450 63
33872.000 Housing for recessed mounting for mounting in plaster. Weight 0.09kg
366666 4∅ 27
70 Q 100 466 3 46666 3
70 Q 100 466 3 46666 3
34974.000 Distribution box, IP68 With four cable entries, 7-25mm. Plastic. ø 95mm, L 240mm. Weight 0.47kg koo3mIP68
50 46 3 90 4666 3
50 46 3
∅ 40 3666666 4
366666 4∅ 27
LED orientation luminaires IP68 Accessories
max. 205 466666666 3
33896.000 Recessed housing IP67 for installation in concrete wall. Cast aluminium, double powder-coated black. 2 cable entries with IP67 threads. Through-wiring possible. 4-pole terminal block. Connection cable, L 300mm. Protection mode IP67: dust-proof and protected against the results of temporary immersion. Weight 0.75kg
1044
ERCO Program 2012
33876.000 Tool kit for mounting in cable ducts.
www.erco.com
Lamp index LED Abbreviation ZVEI
Symbol
LED
LED
Power
Voltage
Luminous flux
Colour rendition index
P(W)
U(V)
F(lm)
Ra
0,3 0,3 0,3
-
0,6 0,6 0,6
-
0,8 0,8 0,8
Light colour
Colour temperature
Average service life
(K)
t(h)
-
blue warm white neutral white
3000 4000
50000 50000 50000
17 24
-
blue warm white neutral white
3000 4000
50000 50000 50000
-
17 24
-
blue warm white neutral white
3000 4000
50000 50000 50000
1,7 1,7
-
64 90
-
warm white neutral white
3000 4000
50000 50000
2,2 2,2
-
145 180
90 80
warm white neutral white
3000 4000
50000 50000
3,2 3,2
-
240 300
90 80
warm white neutral white
3000 4000
50000 50000
4,5 4,5
-
290 360
90 80
warm white neutral white
3000 4000
50000 50000
6,3 6,3
-
480 600
90 80
warm white neutral white
3000 4000
50000 50000
6,7 6,7
-
435 540
90 80
warm white neutral white
3000 4000
50000 50000
9,0 9,0
-
580 720
90 80
warm white neutral white
3000 4000
50000 50000
13 13
-
870 1080
90 80
warm white neutral white
3000 4000
50000 50000
20 20
-
1305 1620
90 80
warm white neutral white
3000 4000
50000 50000
22 22
-
1450 1800
90 80
warm white neutral white
3000 4000
50000 50000
27 27
-
1740 2160
90 80
warm white neutral white
3000 4000
50000 50000
34 34
-
2175 2700
90 80
warm white neutral white
3000 4000
50000 50000
36 36
-
2320 2880
90 80
warm white neutral white
3000 4000
50000 50000
40 40
-
2610 3240
90 80
warm white neutral white
3000 4000
50000 50000
54 54
-
3480 4320
90 80
warm white neutral white
3000 4000
50000 50000
All data is provided for guidance only. Manufacturersâ&#x20AC;&#x2122; current published data must be used. The average service lives of LEDs are statistical values and mean that the LEDs still achieve a minimum of 70% of their luminous flux and that a maximum of 50% of the LEDs may have
www.erco.com
failed. Operation in direct sunlight must be avoided. No other heat sources should be in the immediate vicinity of the installed luminaire, e.g. heating pipes.
LED luminaires are also subject to the usual 2-year warranty.
ERCO Program 2012
1045
Lamp index LED varychrome Abbreviation ZVEI
Symbol
LED
LED
Power
Voltage
Luminous flux
Colour rendition index
P(W)
U(V)
F(lm)
Ra
1,4
-
-
1,4
-
1,5
Light colour
Colour temperature
Average service life
(K)
t(h)
-
-
-
red, green, blue red, green, blue
-
-
-
-
red, green, blue
-
-
3,3
-
-
red, green, blue
-
-
3,0
24
30
-
red, green, blue
-
-
12
-
375
-
red, green, blue
-
50000
16
-
500
-
red, green, blue
-
50000
23
-
870
90
red, green, blue, warm white
-
50000
24
-
750
-
red, green, blue
-
50000
30
-
870
90
red, green, blue, warm white
3000
50000
All data is provided for guidance only. Manufacturersâ&#x20AC;&#x2122; current published data must be used. The average service lives of LEDs are statistical values and mean that the LEDs still achieve a minimum of 70% of their luminous flux and that a maximum of 50% of the LEDs may have
1046
ERCO Program 2012
failed. Operation in direct sunlight must be avoided. No other heat sources should be in the immediate vicinity of the installed luminaire, e.g. heating pipes.
LED luminaires are also subject to the usual 2-year warranty.
www.erco.com
Lamp index Low-voltage halogen lamps Abbreviation ZVEI
Symbol
Power
Voltage
P(W)
U(V)
QT9-ax
20
12
G4
QT12-ax
75
12
90
QT12-ax-RE
Lampholder
Luminous flux
F(lm)
Colour rendition index Ra
Diameter
Length
Average service life
D(mm)
L(mm)
t(h)
320
100
9
33
4000
GY6.35
1575
100
12
44
4000
12
GY6.35
1800
100
12
44
4000
100
12
GY6.35
2200
100
12
44
4000
50
12
GY6.35
1250
100
12
44
4000
All data is provided for guidance only. Manufacturersâ&#x20AC;&#x2122; current published data must be used. Safety distance The sign w on the luminaire indicates the safety distance required in the direction of the beam. This safety distance must be observed.
www.erco.com
ERCO Program 2012
1047
Lamp index Low-voltage halogen reflector lamps Abbreviation ZVEI
Symbol
Power
Voltage
P(W)
U(V)
QR-CBC35
20 20
12 12
GU4 GU4
700 4500
38 10
100 100
QR-CBC51
35 35
12 12
GU5.3 GU5.3
700 8000
60 10
QR-CBC51-RE
35 35 35
12 12 12
GU5.3 GU5.3 GU5.3
1100 2200 12500
50 50 50
12 12 12
GU5.3 GU5.3 GU5.3
50
12
75 75
QR-111
QR-111-RE
Lampholder
Light intensity
Half peak value
I(cd)
< (°)
Colour rendition index Ra
Diameter
Length
Average service life
D(mm)
L(mm)
t(h)
35 35
37 37
3000 3000
100 100
51 51
45 45
4000 4000
60 36 10
100 100 100
51 51 51
45 45 45
5000 5000 5000
1430 2850 15000
60 36 10
100 100 100
51 51 51
45 45 45
5000 5000 5000
G53
40000
4
100
111
63
3000
12 12
G53 G53
1900 30000
45 8
100 100
111 111
63 63
3000 3000
100 100
12 12
G53 G53
2800 48000
45 8
100 100
111 111
63 63
3000 3000
50
12
G53
5800
24
100
111
63
4000
All data is provided for guidance only. Manufacturersâ&#x20AC;&#x2122; current published data must be used. Safety distance The sign w on the luminaire indicates the safety distance required in the direction of the beam. This safety distance must be observed.
1048
ERCO Program 2012
www.erco.com
Lamp index Tungsten halogen lamps Abbreviation ZVEI
Symbol
Power
Voltage
P(W)
U(V)
QT-DE12
1000
230
QT-DE12-RE
120
QT-DE12-RE
Lampholder
Luminous flux
F(lm)
Colour rendition index Ra
Diameter
Length
Average service life
D(mm)
L(mm)
t(h)
R7s
22000
100
12
186
2000
230
R7s
2300
100
12
114
2000
230
230
R7s
5000
100
12
114
2000
400
230
R7s
9000
100
12
114
2000
80
230
R7s
1450
100
12
75
2000
120
230
R7s
2300
100
12
75
2000
All data is provided for guidance only. Manufacturers’ current published data must be used.
Lamp index Reflector lamps Abbreviation ZVEI
Symbol
Power
Voltage
Lampholder
Light intensity
Half peak value
I(cd)
< (°)
Colour rendition index Ra
P(W)
U(V)
R63
60
230
E27
960
30
-
R95
100
230
E27
1350
35
100
Diameter
Length
Average service life
D(mm)
L(mm)
t(h)
63
105
1000
95
140
1000
All data is provided for guidance only. Manufacturers’ current published data must be used.
www.erco.com
ERCO Program 2012
1049
Lamp index Parabolic aluminised reflector lamps Abbreviation ZVEI
Symbol
Power
Voltage
Lampholder
P(W)
U(V)
PAR38
120 120
230 230
E27 E27
PAR56
300 300
230 230
GX16d GX16d
Light intensity
Half peak value
I(cd)
< (°)
Colour rendition index Ra
Diameter
Length
Average service life
D(mm)
L(mm)
t(h)
3100 9300
30 12
100 100
122 122
136 136
2000 2000
9000 40000
16/40 9/15
100 100
179 179
127 127
2000 2000
Light intensity
Half peak value
Diameter
Length
Average service life
I(cd)
< (°)
Colour rendition index Ra
D(mm)
L(mm)
t(h)
All data is provided for guidance only. Manufacturers’ current published data must be used.
Lamp index Halogen parabolic reflector lamps Abbreviation ZVEI
Symbol
Power
Voltage
Lampholder
P(W)
U(V)
QPAR20
50 50
230 230
E27 E27
1000 3200
30 10
100 100
64 64
91 91
2000 2000
QPAR30
100 100
230 230
E27 E27
3000 9000
30 10
100 100
97 97
90 90
2500 2500
QPAR38
100
230
E27
10000
12
100
122
136
2500
All data is provided for guidance only. Manufacturers’ current published data must be used.
1050
ERCO Program 2012
www.erco.com
Lamp index Metal halide lamps Abbreviation ZVEI
Symbol
Power
Lampholder
P(W)
HIT-TC-CE
Luminous flux
Colour temperature
F(lm)
(K)
Colour rendition index Ra
Diameter
Length
Average service life
D(mm)
L(mm)
t(h)
20
G8.5
1800
3000
85
14
85
15000
35
G8.5
3900
3000
90
15
85
15000
20
GU6.5
1800
3000
85
13
52
15000
35
GU6.5
3400
3000
88
13
52
10000
HIT-TC-CE
20
PGJ5
1650
3000
85
17
45
12000
HIT-CE
20
G12
1800
3000
85
14
90
15000
35 35
G12 G12
3300 3900
3000 3000
81 90
20 20
100 100
12000 15000
50
G12
5400
3000
90
20
100
15000
70 70
G12 G12
6600 7750
3000 3000
84 90
20 20
100 100
12000 15000
150 150
G12 G12
14000 15000
3000 3000
85 90
20 20
110 110
12000 12000
250
G12
23000
3000
89
23
130
11000
70
RX7s
6500
3000
82
22
114
12000
150
RX7s
14200
3000
88
25
132
12000
HIT-DE
250
Fc2
20000
4200
88
25
163
5000
HIT-DE
400
Fc2
35000
4200
85
31
206
12000
HIT-TC-CE
HIT-DE-CE
All data is provided for guidance only. Manufacturersâ&#x20AC;&#x2122; current published data must be used.
www.erco.com
ERCO Program 2012
1051
Lamp index Metal halide reflector lamps Abbreviation ZVEI
Symbol
Power
Lampholder
P(W)
HIPAR51-CE-P
20 20 20
GX10 GX10 GX10
HIPAR20
35 35
HIPAR-L30
HIR111-CE-P
Light intensity
Half peak value
Colour temperature
Colour rendition index
Diameter
Length
Average service life
I(cd)
< (°)
(K)
Ra
D(mm)
L(mm)
t(h)
1500 2900 9000
40 25 12
3000 3000 3000
81 81 81
51 51 51
58 58 58
9000 9000 9000
E27 E27
5000 23000
30 10
3000 3000
81 81
65 65
95 95
7500 7500
70 70
E27 E27
10000 68000
40 10
3000 3000
83 83
97 97
125 125
11000 11000
35 35
GX8,5 GX8,5
4000 35000
40 10
3000 3000
89 89
111 111
95 95
9000 9000
70 70
GX8,5 GX8,5
50000 6500
10 40
3000 3000
89 89
111 111
95 95
10000 10000
Diameter
Length
Average service life
D(mm)
L(mm)
t(h)
All data is provided for guidance only. Manufacturers’ current published data must be used.
Lamp index High-pressure sodium vapour lamps Abbreviation ZVEI
Symbol
Power
Lampholder
P(W)
HST
Luminous flux
Colour temperature
F(lm)
(K)
Colour rendition index Ra
50
GX12-1
2400
2550
83
20
103
10000
100
GX12-1
4900
2550
83
20
110
10000
All data is provided for guidance only. Manufacturers’ current published data must be used.
1052
ERCO Program 2012
www.erco.com
Lamp index Compact fluorescent lamps Abbreviation ZVEI
Symbol
Power
Lampholder
P(W)
Luminous flux
Light colour
F(lm)
Colour temperature
Length
Average service life
(K)
Colour rendition index Ra
L(mm)
t(h)
TC-SEL
9,0
2G7
600
-
4000
80
144
12000
TC-DEL
10
G24q-1
600
-
4000
80
103
12000
13
G24q-1
900
-
4000
80
131
12000
18
G24q-2
1200
-
4000
80
146
12000
26
G24q-3
1800
-
4000
80
165
12000
18
GX24q-2
1200
-
4000
82
112
13000
26
GX24q-3
1800
-
4000
82
127
13000
32
GX24q-3
2400
-
4000
82
139
13000
42
GX24q-4
3200
-
4000
82
161
13000
14
GR14q-1
1050
-
4000
82
127
13000
17
GR14q-1
1250
-
4000
82
149
13000
18
GX24q-2
1200
-
4000
82
112
13000
26
GX24q-3
1800
-
4000
82
127
13000
32
GX24q-3
2400
-
4000
82
139
13000
42
GX24q-4
3200
-
4000
82
161
13000
18
2G11
1200
-
4000
80
225
12000
36
2G11
2900
-
-
-
415
12000
55
2G11
4800
-
4000
80
535
12000
36
2G10
2800
-
-
-
217
12000
TC-TEL
TC-TEL
TC-TELI
TC-L
TC-F
All data is provided for guidance only. Manufacturers’ current published data must be used. When used outdoors, a temperaturedependent drop in luminous flux is to be expected below 0°C. TC-T, TC-TEL: lamps which are longer or have different lamp caps, such as
www.erco.com
GE Lighting, cannot be used in some luminaires.
ERCO Program 2012
1053
Lamp index Fluorescent lamps Abbreviation ZVEI
Symbol
Power
Lampholder
P(W)
T16
Luminous flux
Light colour
F(lm)
Colour temperature
Colour rendition index
Diameter
Length
Average service life
(K)
Ra
D(mm)
L(mm)
t(h)
24
G5
1750
-
4000
89
16
549
20000
28 28 28 28
G5 G5 G5 G5
700 2100 2600 3500
blue red green
4000 -
89 -
16 16 16 16
1149 1149 1149 1149
18000 18000 20000 18000
35
G5
3300
-
4000
89
16
1449
20000
54
G5
4450
-
4000
89
16
1149
20000
All data is provided for guidance only. Manufacturersâ&#x20AC;&#x2122; current published data must be used. When used outdoors, a temperaturedependent drop in luminous flux is to be expected below 0°C.
1054
ERCO Program 2012
www.erco.com
Photometric data from ERCO Light intensity distribution The spatial distribution of the lamp lumens results in a 3- dimensional body of light intensity distribution. A longitudinal or transverse section through this body results in a 2- dimensional light intensity distribution curve that indicates the light intensity of a luminaire for all angles of this plane. Usually, this is displayed in a polar coordinate diagram from which the main direction of the beam is recognisable, e.g. direct or indirect emission. The unit of light intensity is Candela (cd).
The light intensity distribution of rotationally symmetrical luminaires is characterised by one symmetrical curve.
60°
60°
30° Axially symmetrical light sources need two curves, displaying the two main planes C0 – C180 (at right angles to the lamp position) and C90 – C270 (parallel to the lamp).
30°
7500 cd
60°
60°
C0-C180 C90 -C270 30° Asymmetrical distributions, mostly of wallwashers, are usually shown in the main curve C0 – C180.
30°
7500 cd
135°
With luminaires for reflector lamps, the light intensity distribution curves are shown in the documents for both the narrow- beam lamp and the maximum permitted widebeam lamp.
3000 cd
105° C0-C180 C90 -C270 Isolux curves represent the illuminance distribution in a defined situation. The illuminance values are shown without regard to any maintained values. The letter H refers to the height of the front lens above the working plane.
m
H=0.65m f=1.00
4 5
1
20
0 0.5
m
Varychrome The “Primary colours LED module” table for RGB or RGBW varychrome luminaires shows the colour parameters to define the luminaire’s setting options via DALI. The parameters shown include: The luminous flux F in lm, the dominant wavelength l in nm, andt hec olours aturationSi n% .
The controllability of the parameters depends on the type of luminaire and the lighting control system used. For RGBW varychrome luminaires, details of the lamp lumens provided in the catalogue refer only to warm white LEDs.
8
6
2
4
2
2
Example of RGBW luminaire: Primary colours LED module Colour F (lm) l (nm) Red 300 620- 640 Green 807 525- 635 Blue 303 465- 475 Warm white 870 -
527 530
0.8 0.7
S (%) 99 77 97 -
510
0.5
555
60
0.6
40
500
575 20
0.4 0.3
490
0.0
3000K
20
20
600
40
60
80
622 780
40
0.2 480
0.1
www.erco.com
80
60 80
465 380 0.0
0.1
0.2
0.3
0.4
0.5
0.6
ERCO Program 2012
0.7
0.8
1055
Photometric data from ERCO Illuminance and light beam diameter The tables usually shown next to the light intensity distribution comprise the illuminance values E (lx) and the light beam diameter D (m) resulting from the half peak value against the distance or height h (m). Illuminance values relate to the axial intensity. The table data for reflector lamps corresponds to the pertinent polar coordinate diagrams.
Light output ratio
Example of a rotationally symmetrical downlight The illuminance values are given in increments of 1m.
h(m) 1 2 3 4 5
E(lx) D (m) 60° 1100 1.15 275 2.31 122 3.46 69 4.62 44 5.77
h (m)
Example of an axially symmetrical projector Where illuminances are high, the values are given in increments of 2m. The first column of D (m) contains the beam angle of the plane C0 – C180, the second column contains the values of the plane C90 – C270.
h(m)
Example of an uplight with indirect emission The table data for recessed floor luminaires shows the beam direction values, i.e. from bottom to top.
h(m)
According to DIN/EN 13032/2, the light output ratio is abbreviated “LOR”.
Luminaires with direct/indirect emission also specify the “DLOR” (Downward Light Output Ratio) and the “ULOR” (Upward Light Output Ratio) as additional components. These indicate the luminous flux distribution of a luminaire in the lower and upper parts of the room.
Light output ratio of a luminaire with direct emission LOR
0.54
2 4 6 8 10
5 4 3 2 1
E(lx) D (m) 9° 8620 0.31 2155 0.63 958 0.94 539 1.26 345 1.57
15° 0.53 1.05 1.58 2.11 2.63
D (m)
E(lx) D (m) 12° 4 2.10 63 1.68 111 1.26 250 0.84 1000 0.12
Light output ratio of a luminaire with direct/indirect emission LOR DLOR ULOR
E (lx)
0.54 0.40 0.14
The calculation of the maintenance factor is described in a separate chapter. This also contains all relevant information and tables. In the catalogue, the classification for the “maintenance factor according to CIE” is shown right next to the product. This appendix comprising photometric data also contains all other tables. The product data sheets relate the relevant data and tables directly to the pertinent products. LMF
Glare evaluation according The UGR reference value for a to UGR standard room The UGR method – Unified Glare Rating according to CIE 117 – is With symmetrical light distribution used to evaluate and limit the UGR: 19.0 psychological direct glare from <1000 cd/m2 luminaires. Contrary to the previous 65° methods, where the glare was rated using the luminance values of a single luminaire, this method calculates the glare of the entire lighting installation at a defined observer position. According to DIN EN 12464, the UGR reference value is provided for a standard room. An exact calculation of the UGR value at a defined observer position in a room is possible with modern lighting design programs such as DIALux. Where the luminance is < 1000 cd/m2, additional data is provided on the elevation angle, either 55°, 65° or 75°. This is the critical angle above which the luminaire has an all- round luminance of < 1000 cd/m2.
1056
ERCO Program 2012
C
With axially symmetrical light distribution This specifies the values for a line of vision at right angles (C0- C180) and parallel (C90–C270) to the lamp. UGR C0 19.0 UGR C90 18.3 65° <1000 cd/m2
www.erco.com
ERCO planning data Maintained value of illuminance On publication of DIN EN 12464- 1, the luminous intensities it recommends are “maintained values of illuminance”. These must not at any time be lower than indicated. Instead of using the maintenance factor and the light loss factor as influencing variables in the lighting design, the new term now introduced is “maintenance factor”. The new value for the illuminance of an installation is calculated from the maintained value of illuminance and the maintenance factor.
En
According to DIN EN 12464- 1, one of the components required in lighting design is a maintenance plan specifying the cleaning frequency of the luminaires and the room and the lamp replacement.
The maintenance factor is calculated on the basis of separate tables or in computer calculations such as DIALux from version 4.0. The maintenance factor is calculated using the following formula:
MF
New value of a lighting installation Maintained value of illuminance Maintenance Factor
En =
Em / MF
Em
New value = Maintained value / Maintenance Factor
The photometric planning data from ERCO is published on the basis of the “new value of illuminance”. The maintained value of illuminance can be determined by way of a maintenance factor.
www.erco.com
MF = LMF · RSMF · LLMF · LSF MF
Maintenance Factor
LMF
Luminaire Maintenance Factor
RSMF Room Surface Maintenance Factor LLMF Lamp Lumen Maintenance Factor LSF
Lamp Survival Factor
LMF Luminaire Maintenance Factor
The luminaire maintenance factor LMF takes into account the reduction of luminous flux due to the soiling of the luminaire. It signifies the ratio of a luminaire’s light output ratios before and after cleaning. The LMF depends on the version of the luminaire and the related possibility of soiling. The LMF classifica-
tion is indicated next to the product. The LMF values ensue from the attached tables. At this point, the optimal cleaning frequency must be defined for the maintenance plan.
RSMF Room Surface Maintenance Factor
The room surface maintenance factor RSMF takes into account the reduction of luminous flux due to the soiling of the room surfaces. It signifies the ratio of the room surface reflectances before and after cleaning. The RSMF depends on the degree of soiling of the room or the ambient conditions of a room and the specified cleaning frequency. Further influencing factors are the
size of the room and the type of lighting (direct to indirect emission). The table provides 4 classifications for environmental conditions: P pure (very clean room), C clean (clean room), N normal (average conditions) and D dirty (dirty room)
LLMF Lamp Lumen Maintenance Factor
The lamp lumen maintenance factor LLMF takes into account the reduction of luminous flux due to the ageing of the lamp. It signifies the ratio of the lamp lumens at a
specific time and the new value. The current data provided by the lamp manufacturers must be taken into account here.
LSF Lamp Survival Factor
The lamp survival factor LSF takes into account the variation of the life of individual lamps from the mean life of the lamps. The LSF depends on the service life of the lamp. The latest data provided by the lamp manufacturers must be taken into account here. If defective lamps are replaced immediately, the lamp survival factor applied is LSF = 1.
The maintenance plan for a lighting installation must also specify the optimal lamp replacement frequency. This depends on the degree of use of the lamp and is determined by analysing the period of illumination in the room and the mean service life of the specific lamps.
ERCO Program 2012
1057
ERCO planning data LMF Luminaire Maintenance Factors
Classification A B C D E F
Luminaire type Open luminaires (not from ERCO) Open- top reflectors (not from ERCO) Closed- top reflectors Closed reflectors Dustproof luminaires Luminaires with indirect emission
Examples of ERCO LMF luminaire maintenance factors
Classification C: Closed- top reflectors
Recessed luminaires for compact fluorescent lamps, surface- mounted downlights without cover glass, pendant luminaires as well as Monopoll.
Classification D: Closed reflectors
Protective glass and diffusers in front of low- voltage halogen lamps and high- pressure discharge lamps reduce the convection and dust collection on the lamp or near the reflector. Sculpture lenses and spread lenses also prevent a soiling of the lamp and provide a cover for the optical system.
Classification E: Dustproof luminaires
Aside from exterior luminaires with a protection mode above IP6x, LED luminaires with dustproof tertiary lenses and luminaires with reflector lamps are also considered closed due to their design.
Spotlights and wallwashers with lenses, recessed luminaires and surface- mounted and pendant luminaries with cover glass.
All exterior luminaires. All Cantax, Light Board, Opton with LED, Logotec square with LED. All interior luminaires with reflector lamps.
Classification F: Luminaires with indirect emission
1058
ERCO Program 2012
Wall- mounted luminaires, e.g. Trion Uplight. Light structures, e.g. Hi- trac, indirect emission.
www.erco.com
ERCO planning data Calculation of Maintenance Factor
LMF Luminaire Maintenance Factor
Cleaning frequency (a) Environmental conditions A Open luminaires B Open- top reflectors C Closed- top reflectors D Closed reflectors E Dustproof luminaires F Luminaires with indirect emission
1 P 0.96 0.95 0.94 0.94 0.96 0.93
C 0.93 0.90 0.89 0.88 0.94 0.86
N 0.89 0.86 0.81 0.82 0.90 0.81
D 0.83 0.83 0.75 0.77 0.86 0.74
2 P 0.93 0.92 0.91 0.91 0.93 0.88
C 0.89 0.84 0.80 0.83 0.91 0.77
N 0.84 0.80 0.69 0.77 0.86 0.66
D 0.78 0.75 0.59 0.71 0.81 0.57
3 P 0.91 0.89 0.87 0.89 0.92 0.85
C 0.85 0.79 0.74 0.79 0.90 0.70
N 0.79 0.74 0.61 0.73 0.84 0.55
D 0.73 0.68 0.52 0.65 0.79 0.45
RSMF Room Surface Maintenance Factor
Cleaning frequency (a) Environmental conditions Direct emission Direct/indirect emission Indirect emission
1 P 0.96 0.94 0.91
C 0.92 0.89 0.83
N 0.87 0.80 0.68
D 0.81 0.69 0.51
2 P 0.96 0.93 0.90
C 0.92 0.88 0.81
N 0.87 0.79 0.67
D 0.81 0.69 0.50
3 P 0.96 0.93 0.90
C 0.92 0.88 0.81
N 0.87 0.79 0.67
D 0.81 0.69 0.50
Classification of Environmental Conditions P (very clean room) pure C (clean room) clean N (average conditions) normal D (dirty room) dirty LLMF Lamp Lumen Maintenance Factor
LSF Lamp Survival Factor
www.erco.com
Hours of operation (h) LED Tungsten halogen lamps/ low- voltage Metal halide lamps High- pressure sodium vapour lamps Compact fluorescent lamps Fluorescent lamps
2000 4000 6000 8000 10000 12000 20000 30000 40000 50000 0.97 0.96 0.95 0.94 0.93 0.92 0.87 0.82 0.77 0.72 0.97 0.88 - - - - - - - - 0.94 0.89 0.83 0.80 0.76 0.99 0.98 0.98 0.97 0.97
- 0.96
- 0.94
- -
- -
- -
0.91 0.89 0.87 0.85 - 0.96 0.95 0.94 0.93 0.92
- 0.91
- 0.88
- -
- -
- -
- -
- -
- -
If defective lamps are replaced immediately, the lamp survival factor applied is LSF = 1.
ERCO Program 2012
1059
ERCO planning data Example
Clean room with little deterioration Annual cleaning of the luminaire Improvement of the room reflectance factor every 3 years, e.g. by cleaning the room surfaces Lamp replacement after 10,000 hours Immediate replacement in case of lamp failure
LMF Luminaire Maintenance Factor
Cleaning frequency (a) Ambient conditions Closed- top reflectors
1 P C N D 0.94 0.89 0.81 0.72
2 P C N D 0.88 0.80 0.69 0.59
3 P C N D 0.84 0.74 0.61 0.52
RSMF Room Surface Maintenance Factor
Cleaning frequency (a) Ambient conditions Direct emission
1 P C N D 0.99 0.98 0.96 0.95
2 P C N D 0.97 0.96 0.95 0.94
3 P C N D 0.96 0.96 0.95 0.94
LLMF Lamp Lumen Maintenance Factor
Hours of operation (h) Compact fluorescent lamps
2000 4000 6000 8000 10000 12000 14000 16000 18000 20000 0.92 0.88 0.85 0.83 0.85 - - - - - -
LSF Lamp Survival Factor
LSF = 1
If all the individual maintenance factors are known, these can simply be inserted into the formula. Where individual parameters change, the maintenance factor must be recalculated.
Luminaire Maintenance Factor MF = LMF · RSMF · LLMF · LSF MF = 0.94 · 0.96 · 0.85 · 1 MF = 0.76
New value of the lighting installation
En = Em / MF En = 500lx / 0.76 En = 652
The reference maintenance factors
1060
ERCO Program 2012
In cases where the maintenance factor cannot be calculated on the basis of definite assumptions, the following reference maintenance factors are recommended:
Reference maintenance factor
Reference new value factor
Example
0.80
1.25
Clean room, little use
0.67
1.50
Clean room, 3- year maintenance cycle
0.57
1.75
Interior and exterior, average conditions, 3- year maintenance cycle
0.50
2.00
Interior and exterior, severe deterioration, 3- year maintenance cycle
www.erco.com
ERCO planning data Planning data in the ERCO catalogue
The “planning data” provided includes P*, the “connected load per m2 and 100lx” and n*, the “number of luminaires per 100lx”. In practice, these must be converted using the maintenance factors determined separately.
Connected load of one luminaire Connected load per 100lx Number of luminaires per 100lx
“Guide values” are used to plan the approximate lighting requirement. These are small tables including the “number of luminaires per 100m2” and the “illuminance values for luminaire modules”. In practice, the guide values must also be converted using the maintenance factors determined separately.
Number of luminaires per 100m2 100lx 200lx 2x26W 5 9
300lx 14
500lx 23
Illuminance (lx) for module (m) 1.2x1.8 1.8x1.8 1047 698
1.8x2.4 524
2.4x2.4 393
To determine the illuminance, the maintenance factor must be taken into account along with the geometry of the room to be planned and its reflection capacity. To do so, the correction factor f is taken from the correction table. The correction table itself can be found on the product specification sheet. The correction table also provides the required factors to be applied for room data other than k = 2.5 (approx. 100m2) and reflectances other than 0.7/ 0.5/ 0.2.
Correction table Ceiling 0.7 0.7 Wall 0.7 0.5 Floor 0.5 0.2
0.7 0.2 0.2
0.5 0.2 0.1
0 0 0
k0.6 k1.0 k1.5 k2.5 k3.0
67 79 89 96 99
66 77 86 91 93
64 74 83 88 90
Tables with illuminance values of wallwashers are based on calculations with a reasonable offset from the wall/luminaire spacing and help decide on the right wallwashers and their optimal positioning. Here too, the values must, in practice, be converted using the maintenance factors determined separately. In order to evaluate the illuminance distribution, we recommend that the detailed tables provided in the product data sheets be used. Over and above this though, the planning and design of individual, projectspecific lighting installations should always be based on accurate photometric data.
www.erco.com
QT12- ax 100W/12V GY6.35 2200lm P: 100W P*: 6.41W/m2 n*: 6.41 1/100m2
2x26W
90 106 118 128 131
73 85 94 100 102
Mean illuminances En (wall) Specifications: Number of luminaires n>5 without indirect component without peripheral area 3.00 Wall height (m) 1.00 1.00 1.25 1.25 Offset from wall (m) Luminaires pacing( m) 1.00 1.25 1.25 1.50 Illuminance En (lx)
324 265 221 186
ERCO Program 2012
1061
ERCO planning data Planning data in product data sheets
Product data sheets comprise all photometric data required for a detailed lighting design. Along with the catalogue data, they also provide the correction tables to be used for the guide values. The correction factor f takes into account the geometry of the room to be planned and its reflection capacity. The correction table also provides the required factors to be applied for room data other than k = 2.5 (approx. 100m2) and reflectances other than 0.7/ 0.5/ 0.2.
Correction table Ceiling 0.7 0.7 Wall 0.7 0.5 Floor 0.5 0.2
0.7 0.2 0.2
0.5 0.2 0.1
0 0 0
k0.6 k1.0 k1.5 k2.5 k3.0
67 79 89 96 99
66 77 86 91 93
64 74 83 88 90
90 106 118 128 131
73 85 94 100 102
Tables comprising comprehensive data are provided for wallwashers. For an arrangement of 5 wallwashers with different offsets from the wall/luminaire spacings, point illuminances from the ceiling to the floor are available that enable a detailed assessment of the illuminance distribution on a wall. Illuminances En (lx) Specifications: Number of luminaires >5 Wall height 3m Offset from wall (m) 1.00 Luminaire spacing (m) 1.00
0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75
1.00 1.25
1.25 1.25
1.25 1.50
Below Between luminaire luminaires
Below Between luminaire luminaires
Below Between luminaire luminaires
Below Between luminaire luminaires
384 386 363 351 336 336 331 314 288 256 218
318 320 298 285 281 277 274 259 233 208 182
239 252 247 229 225 215 214 216 210 201 187
206 216 207 196 191 186 184 184 181 172 158
366 386 356 334 327 330 329 318 289 248 212
283 303 289 269 261 263 263 254 233 211 181
227 247 241 225 213 212 209 212 211 204 190
185 201 201 189 179 174 174 177 174 169 158
All illuminances are new values. In practice, these must be converted using the maintenance factors determined separately.
1062
ERCO Program 2012
www.erco.com
ERCO planning data Planning example
Abbreviations:
Em (lx)
Maintained value of illuminance Illuminance taken En (lx) from the Guide values table n Number of luminaires P (W) Connected load of one luminaire incl. control gear Connected load P* (W/m2) per 100lx 2 n* (1/100 m ) Number of luminaires per 100lx f Factor taken from the correction table, depending on reflectances and room index k k Room index a (m) Length of room b (m) Width of room h (m) Luminaire height above working plane
Requirements:
The guide values E (lx), P* (W/m2) and n* (1/100 m2) have been calculated for a room k=2.5, working plane 0.75m and reflectances of ceilings = 0.7, walls = 0.5 and floors = 0.2. They include the light loss factor of 1.0. They are valid for a regular module and in practice they also apply to asymmetric modules. Room data:
For room conditions other than 0.7/0.5/0.2 and k = 2.5 the appropriate correction factor f is to be applied. For other lamp lumens and connected loads the values are to be converted proportionally.
H = 2.90 m a = 12.00 m b = 14.00 m h = 2.15 m
Room index:
k=
a路b h (a + b)
k = 3.0
Reflectances:
jD Ceiling = 0.5 jW Walls = 0.2 j B Floor = 0.1
Correction table Ceiling 0.7 0.7 Wall 0.7 0.5 Floor 0.5 0.2
0.7 0.2 0.2
0.5 0.2 0.1
0 0 0
k 0.6 k 1.0 k 1.5 k 2.5 k 3.0
49 69 84 95 99
49 67 80 90 93
45 63 70 86 89
77 100 116 129 133
58 77 91 100 103
Correction factor f = 93%
www.erco.com
ERCO Program 2012
1063
Calculation example using ERCO guide values Calculation example using ERCO guide values. The following can be used as guide values: 1. Calculation of the number of luminaires with specified maintained value Em (from table) 2. Calculation of the maintained value Em with specified luminaire module (from table) 3. Calculation of the number of luminaires n for specified maintained value Em (with P* or n*) 4. Calculation of the maintained value Em for specified number of luminaires n (with P*)
1. Calculation of the number of luminaires n for specified illuminance En 500lx
Specifications En New value of the illuminance f Correction factor from separate correction table 0.93 MF Maintenance Factor, reference value 0.80
Table from the catalogue
Number of luminaires per 100 m2 for illuminance En 100lx 66W 5
200lx 9
300lx 13
500lx 22
Example n= n=
n f · MF 22 0.93 · 0.80
n = 30
2. Calculation of the illuminance (maintained value) Em with specified luminaire module 1.8 x 1.8
Specifications Table from the catalogue Illuminance En (lx) En Illuminance from ERCO table Em Maintained value of illuminance for luminaire module (m) 1.2x1.8 66W 1089 DIN EN 12464 f Correction factor from separate correction table 0.93 MF Maintenance Factor, reference value 0.80
1.8x1.8 726
1.8x2.4 544
2.4x2.4 408
Example Em = En · f · MF Em = 726lx · 0.93 · 0.80 Em = 541lx
1064
ERCO Program 2012
www.erco.com
3. Calculation of the number of luminaires n for specified illuminance (maintained value) Em 500lx
Specifications Connected load of one luminaire P: 66.0W Connected load per 100lx P*: 2.81 W/m2 Em Maintained value of illuminance DIN EN 12464 f Correction factor from separate correction table 0.93 MF Maintenance Factor, reference value 0.80
Specifications Number of luminaires per 100lx n*: 4.25 1/100m2 Em Number of luminaires per DIN EN 12464 f Correction factor from separate correction table 0.93 MF Maintenance Factor, reference value 0.80
4. Calculation of the illuminance (maintained value) Em for specified number of luminaires n
www.erco.com
Specifications Connected load of one luminaire P: 66.0W Connected load per 100lx P*: 2.81W/m2 Em Maintained value of illuminance DIN EN 12464 f Correction factor from separate correction table 0.93 MF Maintenance Factor, reference value 0.80
Example with P* n= n=
Em · a · b · P* P · f · MF 500lx · 12m · 14m · 2.81W/m2 66W · 0.93 · 0.81 ·
100lx
n = 48
Example with n* n=
n=
n* · Em · a · b f · MF 4.25 ·
500lx · 12m · 14m
100m · 100lx · 0.93 · 0.80 2
n = 48
Example with P* Em = Em =
n · P · f · MF a · b · P* 48 · 66W · 0.93 · 0.80 · 100lx 12m · 14m ·
2.81W/m 2
Em = 499
ERCO Program 2012
1065
General Information This catalogue supersedes all previous issues. We reserve the right to make technical and design changes to improve our products or to meet modified statutory requirements. Current data will be supplied on request.
p
All articles which are supplied to Russia (to the Russian Federation) and must be certified for that purpose are GOST- R approved/certified and identified.
MM Identification marks for devices TS- 115 with limited surface temperature for installation in furnishings, ceilings and walls with unknown inflammability characteristics.
DIN EN ISO 9001- 2008
w The w sign on the luminaire FCC Federal Communications Commission indicates the safety distance in the direction of the lamp’s The ERCO Quality Management Sysbeam. This safety distance must LON® tem has been organised in accordance LON is a registered trademark be observed. with DIN EN ISO 9001- 2008. This was of the Echelon Corporation acknowledged by the DQS (Deutsche Many products are protected by a Class I luminaires have an earth Gesellschaft zur Zertifizierung von industrial patent rights. conductor and therefore are not Windows® Managementsystemen) and validated marked. Windows is a registered by licence no. 1151. All luminaires are supplied without trademark of the Microsoft The certified system includes: design/ lamps. LED modules are part of the i Class II luminaires Corporation in the USA and development, production, assembly, luminaire. other countries. sales and service. z Class III luminaires Voltages given in this catalogue refer ERCO sales organisations worldwide C All products subject to EMC are always included in the manageto a mains frequency of 50/60 Hz. guideline 89/336 (electromagment system and are regularly audited IP20 All luminaires meet the requirements of protection mode IP20 netic compatibility) and guideby ERCO auditors. All electrical equipment is to be and are not marked. Other proline 73/23 (low- voltage) meet installed in accordance with IEC regutection modes are specified for the requirements therein and lations and local authority requireeach product. bear the CE symbol on their ments. The local authority should packaging. be consulted if further information r Protection mode IP44 is required. In accordance with the Splash- proof protection against Products with discharge lamps British Health and Safety at Work Act splashes from all directions. and electronic components in 1974, Section VI, products supplied by accordance with the valid EN ERCO contain safety instructions and krr standard, which is the basis of information pertaining to the correct Protection mode IP65 EMC guideline 89/336 (electroDE AEOF 102810 usage and installation of products. Protection against dust and magnetic compatibility), do not The act imposes upon the users of the strong jets of water from all cause interference. products the obligation to ensure that ERCO GmbH was awarded the AEOF directions. (Authorised Economic Operator Full) all personnel involved in the instalEEI Energy Efficiency Index certificate on 27/8/2010. lation, handling, use and disposal of The control gear classification This certification confirms ERCO GmbH koo these products are acquainted with Protection mode IP67 for luminaires with fluoresto be a particularly reliable and trustthe information provided, and made Protection against dust and cent or high- pressure lamps is worthy partner in international trade. fully aware of the precautions that against the results of temporary shown on the data sheet of the need to be taken. As the responsibility It governs the safety and efficiency immersion. luminaire. of the supply chain through to the for correct installation lies with the user, ERCO is to be contacted directly consumer. kooxm LCG = Low- loss control gear prior to the installation for any Protection mode IP68xm ECG = Electronic control gear unit Symbols and abbreviations further information or explanation Protection against dust and which may be required. against the results of continuL = Length & Luminaires and accessories ous submersion up to a depth TL = Total length bearing this sign meet the To assist with the identification of xm. B = Width requirements of the LUM and differentiation of products, the H = Height agreement. colours are usually quoted after the g Suitable lamps only are to be T = Depth article numbers. used in open luminaires. D = Light beam diameter 5 DEKRA test mark With recessed luminaires this generCO = Ceiling aperture ally applies to the reflector colour. For Ü Not suitable for coolbeam 0q RD = Recess depth all other products the housing colour lamps. VDE test mark ∅ = Diameter is indicated. Colours are not speciQ = Square fied for recessed luminaires without T All luminaires meet the 4 SEMKO test mark max. = Maximum reflectors, accessories, etc. F requirements in accordance kg = Approximate weight with with EN 60598- 1 and are suit3 UL test mark lamp The standard finish of our products is able for mounting on normal specified in the product description. inflammable mounting surfaces All dimensions are in millimetres. 7 NEMKO test mark The products can also be produced in (housing parts). the following colours at extra charge: q Luminaires bearing this sign white RAL 9002, white RAL 9010, x Luminaires which are not are VDE approved. silver RAL 9006 and black RAL 9011. suitable for mounting on or Prices and delivery times for other RAL in inflammable mounting China Compulsory Product or BS colours are available on request. surfaces. Certification, Safety The photometric data is based on the Luminaires which are not suitChina Compulsory Product maximum wattage allowed and silver able for mounting on normal Certification, Safety & EMC reflectors. inflammable mounting surfaces. I Articles from the ERCO product Illuminance levels and light beam Luminaires which are not suitrange that are labelled with diameters of narrow beam and maxable for mounting in normal the Nihon sign are available imum- allowed wide beam reflector inflammable mounting surfaces. in a version for the Japanese lamps are provided next to each prodmarket. The Japanese version is uct. For further lamp options, refer to Luminaires which are not suitlargely identical to the marked the lamp index. able for covering with heat article in terms of design, insulation material. dimensions and photometric The abbreviated lamp references use performance, but features difthe ZVEI lamp designation system. Short- circuit- tested transferent specific characteristics former in accordance with in compliance with the specific ERCO luminaires are designed, manuEN 61558 electro- technical environment factured and tested to the applicable in Japan. Although not shown standards and technical regulations S Encapsulated safety transformin detail in this catalogue, a of the VDE. Technical testing is coner EN 61347 wide range of accessories is also ducted at an ambient temperature available for these products. of 25°C, as per IEC 60598. V Selfcontained control gear in ERCO track and its connectors accordance with EN 60598 are operated as a 1- circuit The luminous flux values and other system in the technical environphotometric data also relate to an SELV Safety extra- low voltage ment of Japan. For more exact ambient temperature of 25°C. At information on specifications other temperatures, deviations from and ordering, please get in the values stated in the catalogue touch with your ERCO contact. are possible. Our continually updated product documentation can be accessed at www.erco.com.
8 6
1066
ERCO Program 2012
www.erco.com
General Information Information on highpower LEDs Due to the production process of LEDs, the specified typical LED parameters show statistical values only. There can be variations in the range typical for LEDs. The service life of an LED largely depends on the ambient temperatures. Therefore, the luminaires should not be installed near other sources of heat such as heating pipes, etc. Furthermore, these luminaires should not be operated when exposed to direct sunlight. As a result of innovative heat management, ERCO luminaires with high- power LEDs reach the rated life specified by the manufacturers. Use of infrared- reflecting low- voltage halogen lamps (QR- CBC- RE) In this technology, the halogen lamps are designed with a special infrared- reflecting coating on the outside of the bulb to ensure that the infrared (IR) radiation of the lamp is reflected back to the lamp filament. Fitted in ERCO luminaires, these lamps are thermally safe. For photometric data, refer to the manufacturers’ specifications. Photometric and lighting design data of luminaires for metal halide lamps The photometric and lighting design data identified and published by ERCO are based on the use of metal halide lamps with cylindrical discharge tubes. The use of any other lamps may result in deviations, although these may only be minor. Depending on the manufacturer, the discharge tubes of metal halide lamps are usually made of a ceramic body of various shapes and sizes. This results in differences in the performance of the lamps themselves. Further variations may be the result of lamp production tolerances. Additionally, there will be tolerances in the positioning of the lamp within the reflector systems of the luminaires. While these are usually minor, they are still detectable. It must also be taken into account that differences in the size of the discharge tube can lead to differences in the beam angle and the light intensity. DALI (Digital Addressable Lighting Interface) DALI, i.e. the digital interface protocol, identifies the way in which the ECGs are controlled, not the system or system components. ERCO‘s Light System DALI automatically controls the DALI ECG fitted in the luminaires. These, in turn, are based on a common platform for the control of dimmable ECG. When installed in the luminaire, each DALI ECG saves luminaire data. Once the luminaire is fitted in the lighting system, the luminaire is then given an address. The DALI Light Studio software provides the user with specific luminaire data and installation information in a comprehensible and user- friendly format. The central control unit, the DALI light server, controls or dims up to 64 ECGs via a two- wire control line. The control signal can also be carried by the two normally unused conductors in a 5- core high- voltage connection cable. In this case, there is no need for an additional control line.
DALI
www.erco.com
Potentiometer for dimming lowvoltage halogen lamps Some transadapters or transformer housings of spotlights using lowvolt age halogen lamps contain electronic transformers 230/12V, 50W or 100W. These spotlights can additionally be dimmed on 1- circuit or 3- circuit tracks. The integral potentiometer can be used to dim the lamp lumens continuously down to 10%. A lightemitting diode is provided to monitor the function. When using additional external trailing edge dimmers, the potentiometer must be set to the highest setting to prevent flickering. Overvoltage protection for electronic control gear When switching off inductive loads, e.g. fluorescent lamps, highpressure discharge lamps, motors, etc., spikes (high voltage peaks) may occur which can be so severe that the electronic control gear’s integrated safety device, and the control gear itself, can be destroyed. To protect electronic control gear from such spikes, separate overvoltage protection units, e.g. 83819.000, should be installed in parallel, on the input side. Dimming of LED luminaires LED luminaires can be dimmed depending on the type of control gear. Phase dimmable luminaires may only be used with suitable dimmers (trailing edge technology). Always read the manufacturer’s installation instructions and check the required load data. To ensure proper functioning of the dimmer, especially when using universal dimmers, check the luminaire/ control gear/dimmer combination before installation. Dimming of metal halide lamps Due to their unique innovative design, metal halide lamps are increasingly used in lighting installations. On the one hand, this results from the objective of creating ever smaller lamps, and the development of lower wattages makes it easier to select the correct power level. On the other hand, while the dimming of metal halide lamps may be possible from a technical point of view, the negative effects on the colour temperature and the colour rendition do not make this a viable option. Furthermore, there is inadequate data available on the effects of dimming on the life of the lamps. Always refer to the lamp and control gear manufacturers’ specifications. Electronic control gear in 3- circuit installation To avoid damaging the electronic control gear, the neutral conductor of control gears in 3- circuit installations must never be disconnected. Electronic control gear units Non- dimmable ECGs have established themselves on the market since they achieve greater lamp luminous efficacy than conventional control gear. They also extend the lamp life up to 20,000h by using the so- called “soft- start“, they produce low power losses and ensure improved visual comfort due to their flicker- free operation. Dimming increases both visual comfort and efficiency.
Dimming of fluorescent lamps Dimming is often used with fluorescent lamps and com pact fluorescent lamps. The reasons for this are efficiency and increased visual comfort. In general, lamps require special control gear for dimming, the varying dimensions of which have to be taken into account when designing the luminaires. 1V- 10V control voltage Besides a special ECG with an input for the 1V- 10V control voltage, dimming in a 10V installation only requires a potentiometer or an interface to other control systems, which can be connected to the 1V- 10V control voltage. With the help of a Gateway iLON Smart Server, the Light System DALI can be simply connected to an existing LON network and operated via Ethernet. Dimming of compact fluorescent lamps (TC) Conventional TC, TC- D, and TC- T lamps are equipped with integral starters that cannot be dimmed due to the high- frequency starting pulse of electronic components. Special TC- EL, TC- DEL and TC- TEL lamps are available for dimming. They generally have four contact pins. TC- L lamps are operated with a separate starter, TC- F lamps are operated with ECG and can be dimmed in ECG mode without restriction. Note For a good control response, all compact fluorescent lamps must be run at full output for approximately the first 100 hours of operation, subject to the manufacturer‘s specification.
Corrosion protection for outdoor luminaires 1. Instructions on mounting the luminaires are included with each product. Furthermore, the national regulations on installation and accident prevention must be observed. 2. When mounting and maintaining the luminaires, take particular care not to damage the powder coating. Damaged areas coming in contact with water may lead to corrosion. In aggressive environments, both the mounting and the maintenance of all components require appropriate safety measures to be applied. Chemicals may damage the corrosion protection. 3. The luminaires must be cleaned regularly. The required interval and method depend on the site, situation of mounting and environmental conditions. 4. All recessed in- ground luminaires must be installed with a suitable drainage system in place, e.g. a gravel bed. Please ensure that the installation the luminaires allows water to run off their surface.
Replacing high- pressure discharge lamps High- pressure discharge lamps must be immediately replaced at the end of their service life. The end of their service life is reached when: 1. the colour of the light changes, 2. the lamp glass shows dark discolouration, 3. periodic stopping and starting occurs, 4. the lamp no longer ignites. The lamp manufacturer’s instructions must be observed. These luminaires are equipped with protection systems in the control gear to switch the lamp off at the end of its service life. This minimises the like lihood of damage to the control gear. In a few cases, if the lamp is not replaced on time, the control gear used can be destroyed. Hot materials can be emitted from the luminaire and cause damage. Consequential damage may result. Ultrasonic cleaning of reflectors A portable ultrasonic cleaning system is available for extensive reflector cleaning. The Cleanmobil consists of an ultrasonic cleansing basin for a water and cleaning agent mixture, and a rinsing basin for softened water. Bath dimensions: L 0.70m, W 0.30m, H 1.00m Total dimensions: L 1.40m, W 0.90m, H 1.30m 5- pole CEE plug: 14kVA, 16A Fresh water and waste water connections required.
ERCO Program 2012
1067
General Information Information on environmental protection and the disposal of luminaires and lamps REACH On 1 June 2007, a new European law on chemical substances was introduced in Directive (EC) 1907/2006 (REACH Directive). It stipulates that manufacturers, importers and downstream users of chemical substances are responsible for the safe handling of their substances. ERCO is a downstream, or end, user â&#x20AC;&#x201C; a company using substances or mixtures, or processing these in their products (e.g. use of substances/ mixtures as process aids, for product manufacture). ERCO keeps in close contact with its suppliers and continuously verifies that it meets the full spectrum of requirements under the REACH Directive. At present, ERCO is not aware of any information on variations in the serial parts it uses from the limits stipulated by REACH.
RoHS The RoHS Regulation, or EC Directive 2002/95/EC, restricts the use of certain hazardous substances in electrical and electronic equipment. Since coming into force on 1 July 2006, certain substances may not be contained in new equipment produced and put on the market in quantities exceeding maximum concentration values. According to the regulation, lead (Pb), mercury (Hg), hexavalent chromium (CrVI), polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) must not exceed 0.1 per cent by weight per homogeneous material, and cadmium (Cd), 0.01 per cent by weight per homogeneous material. Exceptions for certain applications are listed in the Annex to the Directive.
Disposing of luminaires ERCO has met the requirements of the WEEE Directive since March 2006 in that it has clearly marked all its products with the symbol of the crossed- out bin. These products may be returned free of charge. Alternatively, at the end of their service life, luminaires may be disposed of at appropriate local facilities provided for the disposal or recycling of electronic equipment. Disposing of discharge lamps For physical reasons, low- pressure discharge lamps (fluorescent lamps) and high- pressure discharge lamps contain small quantities of mercury and other trace elements. Discharge lamps must therefore be treated as special waste. For this reason, they cannot be disposed of with household waste. According to the Waste Disposal Law, the owner is obliged to arrange for proper disposal of waste. Discharge lamps can be disposed of intact by bringing them to special waste disposal sites or by being recycled . Always read the disposal information provided by the lamp manufacturer. There are a number of companies that specialise in the disposal of discharge lamps.
ERCO has obtained declarations from its parts suppliers affirming full compliance with the requirements of the RoHS Directive. According to the latest information, the serial parts which ERCO uses therefore do not contain substances in quantities prohibited by the RoHS Directive. This means, ERCO does not use any substances in the manufacture of its products that fail to conform to the RoHS. On request, ERCO can provide its customers with an appropriate manufacturerâ&#x20AC;&#x2122;s declaration. It affirms to the best of our knowledge that all products which ERCO supplies comply with the RoHS Directive.
WEEE EC Directive 2002/96/EC regulates the free return and environmentally friendly disposal and recycling of old and used electrical equipment by manufacturers and importers. Known also as WEEE (Waste Electrical and Electronic Equipment), the Directive aims to reduce the amount of electrical and electronic waste and encourage everyone to recycle the equipment.
1068
ERCO Program 2012
www.erco.com
Article number index No.
page
06652.000 06658.000 06659.000 06660.000 06661.000 06662.000 06663.000 06664.000 06665.000 06666.000 06667.000 06668.000 06670.000 06671.000
42 44 45 43 46 44 44 47 45 45 45 46 43 46
12031.000 12032.000 12033.000 12034.000 12079.000 12083.000 12099.000 12404.000 12406.000 12412.000 12414.000 12440.000 12445.000 12446.000 12447.000 12482.000 12499.000 12503.000 12527.000 12552.000 12553.000 12556.000 12557.000 12558.000 12560.000 12561.000 12563.000 12567.000 12572.000 12587.000 12597.000 12602.000 12606.000 12612.000 12617.000 12657.000 12662.000 12667.000 12671.000 12681.000 12690.000 12691.000 12692.000 12693.000
80 80 80 80 80 85 85 81 81 82 82 60 62 62 77 84 85 85 84 75 76 84 62 85 62 62 85 84 84 84 84 84 84 84 84 85 62 85 62 85 59 57 59 57
13400.000 13401.000 13402.000 13403.000 13404.000 13408.000 13409.000 13413.000 13418.000 13420.000 13421.000 13422.000 13423.000 13440.000 13441.000 13442.000 13460.000 13461.000 13465.000 13466.000 13470.000 13471.000 13475.000 13476.000 13480.000 13481.000 13485.000 13486.000 13490.000 13491.000 13492.000 13500.000
72 72 72 73 73 73 73 74 74 76 76 76 76 72 72 72 75 75 75 75 75 75 75 75 75 75 75 75 76 76 76 75
www.erco.com
No.
page
13501.000 13540.000
75 74
16910.000
60
33200.000 33201.000 33210.000 33211.000 33212.000 33213.000 33214.000 33215.000 33216.000 33217.000 33218.000 33219.000 33220.000 33221.000 33222.000 33223.000 33226.000 33227.000 33228.000 33229.000 33240.000 33241.000 33242.000 33243.000 33244.000 33245.000 33246.000 33247.000 33249.000 33250.000 33270.000 33271.000 33273.000 33274.000 33276.000 33278.000 33279.000 33280.000 33281.000 33282.000 33290.000 33291.000 33300.000 33301.000 33302.000 33303.000 33304.000 33306.000 33311.000 33312.000 33313.000 33314.000 33316.000 33317.000 33318.000 33319.000 33329.000 33332.000 33333.000 33334.000 33337.000 33338.000 33339.000 33342.000 33343.000 33344.000 33345.000 33347.000 33349.000 33351.000 33353.000 33355.000 33357.000 33359.000 33362.000 33363.000 33364.000 33365.000 33366.000 33367.000 33368.000 33369.000 33370.000 33372.000 33374.000 33376.000 33377.000
911 911 915 915 918 918 916 916 921 921 918 918 918 918 916 916 919 919 919 919 911 915 918 916 921 918 918 916 919 919 911 917 920 917 920 920 921 917 920 920 916 919 942 943 942 943 943 942 970 970 971 970 974 974 976 976 933 933 975 974 976 975 976 975 975 974 980 981 980 981 981 982 982 981 934 934 931 931 931 931 934 934 947 947 948 947 947
No.
page
No.
page
No.
page
No.
33378.000 33379.000 33380.000 33382.000 33386.000 33388.000 33392.000 33429.000 33440.000 33445.000 33450.000 33451.000 33453.000 33460.000 33462.000 33464.000 33466.000 33467.000 33478.000 33479.000 33482.000 33483.000 33486.000 33489.000 33494.000 33498.000 33510.000 33511.000 33512.000 33513.000 33514.000 33515.000 33517.000 33518.000 33519.000 33520.000 33524.000 33525.000 33526.000 33528.000 33529.000 33530.000 33531.000 33532.000 33533.000 33534.000 33535.000 33536.000 33537.000 33661.000 33662.000 33663.000 33664.000 33665.000 33666.000 33667.000 33668.000 33669.000 33670.000 33671.000 33672.000 33673.000 33675.000 33677.000 33679.000 33682.000 33685.000 33688.000 33689.000 33691.000 33694.000 33695.000 33696.000 33697.000 33698.000 33699.000 33702.000 33703.000 33704.000 33706.000 33707.000 33708.000 33709.000 33710.000 33711.000 33713.000 33715.000 33717.000 33719.000 33721.000 33723.000 33725.000 33727.000
948 948 949 949 949 950 950 813 810 810 987 988 987 987 989 989 988 988 809 809 812 812 811 811 811 809 815 815 815 816 816 816 817 817 932 935 933 934 934 931 931 932 932 935 935 935 935 935 935 1022 1022 1022 1022 1032 1033 1032 1033 1028 1035 1031 1033 1035 1031 1033 1036 1032 1034 1036 1034 1035 1038 1038 1038 1038 1036 1038 1025 1026 1023 1025 1028 1029 1026 1024 1025 1026 1023 1027 1027 1026 1024 1027 1028
33729.000 33732.000 33733.000 33734.000 33739.000 33750.000 33751.000 33752.000 33753.000 33754.000 33755.000 33756.000 33757.000 33758.000 33759.000 33772.000 33773.000 33774.000 33775.000 33776.000 33785.000 33786.000 33787.000 33788.000 33789.000 33798.000 33799.000 33801.000 33802.000 33803.000 33804.000 33809.000 33811.000 33812.000 33813.000 33814.000 33816.000 33817.000 33818.000 33819.000 33823.000 33824.000 33825.000 33826.000 33827.000 33828.000 33829.000 33831.000 33832.000 33833.000 33834.000 33835.000 33838.000 33839.000 33852.000 33854.000 33872.000 33873.000 33876.000 33885.000 33886.000 33893.000 33894.000 33896.000 33897.000 33898.000 33900.000 33901.000 33905.000 33906.000 33920.000 33921.000 33925.000 33926.000 33940.000 33941.000 33945.000 33946.000 33950.000 33951.000 33952.000 33953.000 33954.000 33955.000 33956.000 33957.000 33958.000 33959.000 33960.000 33961.000 33962.000 33963.000 33965.000
1024 939 938 1031 1027 938 938 1043 1043 1041 1041 1041 1041 1041 1041 1042 1042 1042 1043 1043 1042 834 834 830 830 1043 830 832 831 832 831 833 832 831 832 827 829 828 829 834 828 827 830 830 830 830 834 831 828 828 827 827 834 834 830 833 1044 1044 1044 1044 1044 1044 1044 1044 1044 830 1005 1005 1006 1006 1005 1005 1006 1006 1005 1005 1006 1006 1030 1030 1030 1030 1030 1030 1030 1030 1031 1031 1031 1031 1031 1031 1007
33966.000 33967.000 33970.000 33971.000 33972.000 33973.000 33974.000 33975.000 33976.000 33977.000 33978.000 33979.000 33980.000 33981.000 33982.000 33983.000 33984.000 33985.000 33986.000
1007 1007 944 944 944 868 886 850 944 944 944 886 886 886 886 934 944 944 948
34000.000 34001.000 34003.000 34004.000 34005.000 34007.000 34008.000 34009.000 34010.000 34014.000 34015.000 34016.000 34017.000 34021.000 34022.000 34023.000 34024.000 34025.000 34026.000 34027.000 34028.000 34029.000 34030.000 34031.000 34032.000 34033.000 34034.000 34035.000 34036.000 34037.000 34038.000 34039.000 34040.000 34041.000 34042.000 34043.000 34044.000 34045.000 34046.000 34047.000 34050.000 34051.000 34053.000 34055.000 34058.000 34063.000 34065.000 34066.000 34067.000 34070.000 34071.000 34084.000 34085.000 34086.000 34087.000 34088.000 34089.000 34090.000 34091.000 34092.000 34093.000 34094.000 34095.000 34096.000 34097.000 34100.000 34101.000 34102.000 34103.000 34105.000 34107.000 34108.000 34109.000
877 877 878 880 880 878 880 880 880 866 866 867 867 861 865 865 865 865 865 865 865 864 861 864 864 864 862 862 862 862 863 863 863 863 863 863 866 866 867 867 877 878 879 881 881 879 881 882 882 879 881 861 861 861 861 862 862 862 862 862 862 866 866 867 867 895 899 895 897 897 899 895 897
34111.000 34112.000 34113.000 34114.000 34115.000 34116.000 34117.000 34118.000 34119.000 34150.000 34151.000 34152.000 34153.000 34155.000 34157.000 34158.000 34159.000 34161.000 34162.000 34163.000 34164.000 34170.000 34171.000 34172.000 34200.000 34201.000 34202.000 34203.000 34204.000 34205.000 34206.000 34207.000 34208.000 34209.000 34210.000 34211.000 34212.000 34213.000 34214.000 34215.000 34216.000 34217.000 34218.000 34219.000 34220.000 34221.000 34222.000 34223.000 34224.000 34225.000 34226.000 34227.000 34228.000 34229.000 34230.000 34231.000 34232.000 34233.000 34234.000 34235.000 34236.000 34237.000 34238.000 34239.000 34240.000 34241.000 34242.000 34243.000 34244.000 34245.000 34246.000 34247.000 34254.000 34255.000 34256.000 34257.000 34258.000 34259.000 34260.000 34261.000 34262.000 34264.000 34266.000 34268.000 34270.000 34272.000 34275.000 34276.000 34277.000 34278.000 34279.000 34280.000 34281.000
page 899 895 897 897 901 901 902 902 901 896 900 896 898 898 900 896 898 900 896 898 898 962 962 962 846 847 847 846 846 847 846 847 847 846 847 847 852 852 852 856 857 857 845 845 845 845 851 856 845 845 846 846 851 856 847 847 847 848 853 857 848 848 848 848 853 857 842 842 842 842 843 843 842 842 850 850 855 854 850 850 849 849 849 849 850 850 849 849 849 849 849 849 849
No.
page
34282.000 34283.000 34284.000 34290.000 34291.000 34292.000 34293.000 34294.000 34295.000 34296.000 34297.000 34298.000 34299.000 34300.000 34301.000 34302.000 34303.000 34304.000 34305.000 34306.000 34307.000 34308.000 34309.000 34310.000 34311.000 34312.000 34313.000 34400.000 34401.000 34402.000 34403.000 34404.000 34405.000 34406.000 34407.000 34408.000 34409.000 34410.000 34411.000 34412.000 34413.000 34414.000 34415.000 34416.000 34417.000 34418.000 34419.000 34420.000 34421.000 34422.000 34423.000 34424.000 34425.000 34426.000 34427.000 34428.000 34429.000 34450.000 34451.000 34452.000 34453.000 34454.000 34455.000 34456.000 34457.000 34458.000 34459.000 34460.000 34461.000 34462.000 34463.000 34464.000 34465.000 34466.000 34467.000 34468.000 34469.000 34470.000 34471.000 34472.000 34473.000 34474.000 34475.000 34476.000 34477.000 34478.000 34479.000 34900.000 34901.000 34902.000 34903.000 34910.000 34911.000
849 854 854 842 842 850 850 855 855 843 843 851 851 855 855 843 843 843 843 843 843 844 844 844 844 844 844 872 872 872 872 872 872 872 872 888 888 873 873 873 873 873 873 873 873 888 888 871 871 871 871 871 871 871 871 887 887 875 875 875 875 875 875 875 875 889 889 876 876 876 876 876 876 876 876 889 889 874 874 874 874 874 874 874 874 889 889 906 906 906 906 906 906
No.
page
34912.000 34913.000 34914.000 34915.000 34920.000 34921.000 34922.000 34923.000 34924.000 34925.000 34930.000 34931.000 34932.000 34933.000 34934.000 34935.000 34940.000 34941.000 34942.000 34943.000 34944.000 34945.000 34949.000 34950.000 34957.000 34958.000 34959.000 34960.000 34961.000 34962.000 34963.000 34964.000 34965.000 34974.000 34990.000 34991.000 34994.000 34995.000
906 906 906 906 906 906 906 906 906 906 906 906 906 906 906 906 906 906 906 906 906 906 868 887 887 886 886 887 887 886 886 885 886 850 868 887 1016 908
36000.000 36001.000 36002.000 36003.000 36004.000 36005.000 36009.000 36010.000 36011.000 36012.000 36013.000 36014.000 36015.000 36016.000 36017.000 36018.000 36021.000 36022.000 36023.000 36024.000 36025.000 36026.000 36028.000 36029.000 36030.000 36031.000 36032.000 36033.000 36034.000 36035.000 36036.000 36037.000 36038.000 36039.000 36040.000 36041.000 36042.000 36043.000 36044.000 36045.000 36046.000 36047.000 36048.000 36049.000 36050.000 36051.000 36052.000 36053.000 36054.000 36055.000 36056.000 36057.000 36058.000 36059.000
671 671 672 673 672 673 684 685 674 674 675 675 676 676 677 677 678 678 674 675 676 677 678 670 685 686 686 686 344 346 343 345 679 679 681 681 679 681 687 687 347 347 347 346 346 347 348 349 349 348 348 348 683 683
ERCO Program 2012
1069
Article number index No.
page
36229.000 36238.000 36239.000 36240.000 36241.000 36242.000 36243.000 36244.000 36245.000 36252.000 36253.000 36254.000 36255.000 36256.000 36257.000 36258.000 36400.000 36401.000 36402.000 36403.000 36406.000 36407.000 36408.000 36409.000 36410.000 36411.000 36412.000 36413.000 36418.000 36419.000 36420.000 36421.000 36424.000 36425.000 36426.000 36427.000 36428.000 36429.000 36430.000 36431.000 36432.000 36433.000 36434.000 36435.000 36436.000 36437.000 36438.000 36440.000 36441.000 36442.000 36443.000 36444.000 36445.000 36446.000 36447.000 36448.000 36449.000 36450.000 36451.000 36452.000 36453.000 36454.000 36455.000 36456.000 36457.000 36500.000 36501.000 36502.000 36503.000 36504.000 36505.000 36506.000 36507.000 36508.000 36509.000 36510.000 36511.000 36512.000 36513.000 36514.000 36515.000 36516.000 36517.000 36518.000 36519.000 36520.000 36521.000 36522.000 36523.000 36524.000 36525.000 36600.000 36601.000
1070
670 680 680 682 682 680 682 687 687 350 350 350 349 349 350 683 695 694 696 696 699 697 701 699 703 702 705 703 698 700 702 704 694 725 726 726 727 356 356 357 354 355 355 722 720 695 697 724 725 352 354 351 353 707 706 709 708 706 708 711 710 714 713 711 714 717 716 719 717 716 718 730 730 362 362 363 360 361 361 727 728 728 729 359 359 360 357 358 358 723 721 738 739
No. 36602.000 36603.000 36604.000 36605.000 36606.000 36607.000 36608.000 36609.000 36610.000 36611.000 36612.000 36613.000 36614.000 36615.000 36616.000 36617.000 36618.000 36619.000 36620.000 36621.000 36622.000 36623.000 36624.000 36625.000 36626.000 36627.000 36628.000 36629.000 36630.000 36631.000 36635.000 36636.000 36638.000 36639.000 36640.000 36642.000 36700.000 36701.000 36702.000 36703.000 36706.000 36707.000 36708.000 36709.000 36712.000 36713.000 36714.000 36715.000 36716.000 36717.000 36718.000 36719.000 36720.000 36721.000 36722.000 36723.000 36724.000 36725.000 36726.000 36727.000 36730.000 36731.000 36732.000 36733.000 36736.000 36737.000 36738.000 36739.000 36740.000 36741.000 36742.000 36743.000 36745.000 36746.000 36747.000 36748.000 36749.000 36750.000 36751.000 36752.000 36753.000 36754.000 36755.000 36756.000 36757.000 36758.000 36759.000 36760.000 36761.000 36762.000 36763.000 36764.000 36765.000
ERCO Program 2012
page 738 739 739 741 740 741 740 741 739 741 740 741 740 741 742 743 742 742 742 743 742 742 738 738 738 738 739 740 739 740 743 744 743 744 744 744 623 623 626 625 630 630 633 633 638 638 337 339 337 339 338 339 338 339 647 647 624 624 627 627 629 629 632 631 637 637 659 659 659 659 331 331 641 642 643 643 649 649 644 644 646 646 650 650 654 653 654 653 652 651 652 652 657
No. 36766.000 36767.000 36768.000 36769.000 36770.000 36771.000 36772.000 36773.000 36774.000 36775.000 36776.000 36777.000 36778.000 36779.000 36780.000 36781.000 36782.000 36783.000 36784.000 36785.000 36786.000 36787.000 36788.000 36789.000 36790.000 36791.000 36792.000 36793.000 36794.000 36795.000 36796.000 36797.000 36798.000 36800.000 36801.000 36802.000 36803.000 36804.000 36805.000 36806.000 36809.000 36810.000 36811.000 36812.000 36813.000 36814.000 36815.000 36816.000 36817.000 36818.000 36819.000 36820.000 36821.000 36822.000 36823.000 36824.000 36825.000 36826.000 36827.000 36828.000 36829.000 36830.000 36833.000 36834.000 36835.000 36836.000 36837.000 36838.000 36839.000 36840.000 36841.000 36842.000 36843.000 36844.000 36845.000 36846.000 36847.000 36848.000 36849.000 36850.000 36851.000 36852.000 36853.000 36854.000 36855.000 36856.000 36857.000 36858.000 36859.000 36860.000 36861.000 36862.000 36863.000
page 657 657 657 655 655 655 655 661 661 661 661 366 366 366 366 337 338 337 338 331 331 332 332 363 363 333 333 333 333 364 364 332 332 649 640 641 623 623 626 626 631 631 634 634 636 636 639 639 340 342 340 342 341 342 341 342 648 648 625 625 628 628 629 629 632 632 635 635 637 637 660 660 660 660 642 642 644 644 650 650 645 645 646 646 651 651 367 368 367 368 340 341 340
No.
page
36864.000 36865.000 36866.000 36867.000 36868.000 36869.000 36870.000 36871.000 36872.000 36873.000 36874.000 36875.000 36876.000 36877.000 36878.000 36879.000 36880.000 36881.000 36882.000 36883.000 36884.000 36885.000 36886.000 36887.000 36888.000 36889.000 36890.000 36891.000 36892.000 36893.000 36894.000 36895.000 36896.000 36897.000 36898.000 36899.000 36900.000
341 654 654 655 654 653 652 653 652 658 658 658 658 656 656 656 656 662 662 662 662 334 334 335 335 364 364 336 336 336 336 365 365 334 334 335 335
37000.000 37001.000 37002.000 37003.000 37004.000 37005.000 37009.000 37010.000 37011.000 37012.000 37013.000 37014.000 37015.000 37016.000 37017.000 37018.000 37021.000 37022.000 37023.000 37024.000 37025.000 37026.000 37028.000 37029.000 37030.000 37031.000 37032.000 37033.000 37034.000 37035.000 37036.000 37037.000 37038.000 37039.000 37040.000 37041.000 37042.000 37043.000 37044.000 37045.000 37046.000 37047.000 37048.000 37049.000 37050.000 37051.000 37052.000 37053.000 37054.000 37055.000 37056.000 37057.000 37058.000 37059.000 37229.000
671 671 672 673 672 673 684 685 674 674 675 675 676 676 677 677 678 678 674 675 676 677 678 670 685 686 686 686 344 346 343 345 679 679 681 681 679 681 687 687 347 347 347 346 347 347 349 349 349 348 348 348 683 683 670
No. 37238.000 37239.000 37240.000 37241.000 37242.000 37243.000 37244.000 37245.000 37252.000 37253.000 37254.000 37255.000 37256.000 37257.000 37258.000 37400.000 37401.000 37402.000 37403.000 37404.000 37405.000 37406.000 37407.000 37408.000 37409.000 37410.000 37411.000 37413.000 37414.000 37415.000 37416.000 37419.000 37420.000 37421.000 37422.000 37423.000 37424.000 37425.000 37426.000 37431.000 37432.000 37433.000 37434.000 37437.000 37438.000 37439.000 37440.000 37441.000 37442.000 37443.000 37444.000 37445.000 37446.000 37447.000 37448.000 37449.000 37450.000 37451.000 37453.000 37454.000 37455.000 37456.000 37457.000 37458.000 37500.000 37501.000 37502.000 37503.000 37504.000 37505.000 37506.000 37507.000 37508.000 37509.000 37510.000 37511.000 37512.000 37513.000 37514.000 37515.000 37516.000 37517.000 37518.000 37519.000 37520.000 37521.000 37522.000 37523.000 37524.000 37525.000 37600.000 37601.000 37602.000
page 680 680 682 682 680 682 687 687 350 350 350 349 349 350 683 707 706 709 708 706 708 712 710 715 713 711 714 695 695 696 696 699 698 701 700 703 702 705 704 698 700 702 704 694 726 727 726 727 356 356 357 355 355 355 722 720 695 697 724 725 352 354 351 353 728 728 729 729 359 359 360 357 358 358 723 721 717 716 719 718 716 718 730 730 362 362 363 360 361 361 738 739 738
No. 37603.000 37604.000 37605.000 37606.000 37607.000 37608.000 37609.000 37610.000 37611.000 37612.000 37613.000 37614.000 37615.000 37616.000 37617.000 37618.000 37619.000 37620.000 37621.000 37622.000 37623.000 37624.000 37625.000 37626.000 37627.000 37628.000 37629.000 37630.000 37631.000 37635.000 37636.000 37638.000 37639.000 37640.000 37642.000 37700.000 37701.000 37702.000 37703.000 37706.000 37707.000 37708.000 37709.000 37712.000 37713.000 37714.000 37715.000 37716.000 37717.000 37718.000 37719.000 37720.000 37721.000 37722.000 37723.000 37724.000 37725.000 37726.000 37727.000 37730.000 37731.000 37732.000 37733.000 37736.000 37737.000 37738.000 37739.000 37740.000 37741.000 37742.000 37743.000 37745.000 37746.000 37747.000 37748.000 37749.000 37750.000 37751.000 37752.000 37753.000 37754.000 37755.000 37756.000 37757.000 37758.000 37759.000 37760.000 37761.000 37762.000 37763.000 37764.000 37765.000 37766.000
page 739 739 741 740 741 740 741 739 741 740 741 740 741 742 743 742 743 742 743 742 743 738 739 738 739 739 741 739 741 743 744 743 744 744 744 623 623 626 626 630 630 633 633 638 638 337 339 337 339 338 339 338 339 647 647 624 624 627 627 629 629 632 632 637 637 659 659 659 659 331 331 642 642 643 643 650 650 645 645 646 646 651 651 654 653 654 653 652 652 652 652 657 657
No. 37767.000 37768.000 37769.000 37770.000 37771.000 37772.000 37773.000 37774.000 37775.000 37776.000 37777.000 37778.000 37779.000 37780.000 37781.000 37782.000 37783.000 37784.000 37785.000 37786.000 37787.000 37788.000 37789.000 37790.000 37791.000 37792.000 37793.000 37794.000 37795.000 37796.000 37797.000 37798.000 37800.000 37801.000 37802.000 37803.000 37804.000 37805.000 37808.000 37809.000 37810.000 37811.000 37812.000 37813.000 37814.000 37815.000 37816.000 37817.000 37818.000 37819.000 37822.000 37823.000 37824.000 37825.000 37826.000 37827.000 37828.000 37829.000 37830.000 37831.000 37832.000 37833.000 37834.000 37835.000 37836.000 37837.000 37838.000 37839.000 37840.000 37841.000 37842.000 37843.000 37844.000 37845.000 37846.000 37847.000 37848.000 37849.000 37850.000 37851.000 37852.000 37853.000 37854.000 37855.000 37856.000 37857.000 37858.000 37859.000 37860.000 37861.000 37862.000 37863.000 37864.000
page 657 657 656 655 656 655 661 661 661 661 366 367 366 367 337 338 337 338 331 331 332 332 363 363 333 333 333 333 364 364 332 332 640 641 624 624 627 627 631 631 634 634 636 636 639 639 625 625 628 628 630 630 633 633 635 635 638 638 340 340 341 341 342 342 342 342 649 648 648 660 660 660 660 643 643 644 644 650 650 645 645 647 647 651 651 367 368 367 368 340 341 340 341
No.
page
37865.000 37866.000 37867.000 37868.000 37869.000 37870.000 37871.000 37872.000 37873.000 37874.000 37875.000 37876.000 37877.000 37878.000 37879.000 37880.000 37881.000 37882.000 37883.000 37884.000 37885.000 37886.000 37887.000 37888.000 37889.000 37890.000 37891.000 37892.000 37893.000 37894.000 37895.000 37896.000 37897.000 37898.000 37899.000 37900.000
655 654 655 654 653 652 653 653 658 658 658 658 656 656 656 656 662 662 662 662 334 334 335 335 365 365 336 336 336 336 365 365 334 334 335 335
44517.000 44518.000 44519.000 44523.000 44527.000 44536.000 44547.000 44548.000 44549.000 44563.000 44564.000 44565.000 44567.000 44568.000 44569.000 44570.000 44571.000 44572.000 44574.000 44584.000 44592.000 44593.000 44594.000 44595.000 44596.000 44597.000 44601.000 44602.000 44603.000 44604.000
966 965 964 966 965 964 966 965 964 965 966 966 966 964 964 964 965 965 822 820 822 821 821 820 821 820 821 821 820 820
46000.000 46001.000 46002.000 46003.000 46004.000 46005.000 46009.000 46010.000 46011.000 46012.000 46013.000 46014.000 46015.000 46016.000 46017.000 46018.000 46021.000 46022.000 46023.000 46024.000 46025.000 46026.000 46028.000 46029.000
510 510 511 512 511 512 530 531 513 513 514 514 515 515 516 516 517 517 513 514 515 516 517 522
www.erco.com
Article number index No.
page
46030.000 46031.000 46032.000 46033.000 46034.000 46035.000 46036.000 46037.000 46038.000 46039.000 46040.000 46041.000 46042.000 46043.000 46044.000 46045.000 46046.000 46047.000 46048.000 46049.000 46050.000 46051.000 46052.000 46053.000 46054.000 46055.000 46056.000 46057.000 46058.000 46059.000 46060.000 46061.000 46062.000 46063.000 46064.000 46065.000 46066.000 46067.000 46068.000 46069.000 46100.000 46101.000 46102.000 46103.000 46104.000 46105.000 46106.000 46107.000 46108.000 46109.000 46110.000 46111.000 46112.000 46113.000 46114.000 46115.000 46116.000 46117.000 46118.000 46119.000 46120.000 46121.000 46122.000 46123.000 46124.000 46125.000 46126.000 46127.000 46229.000 46246.000 46247.000 46248.000 46249.000 46250.000 46251.000 46252.000 46253.000 46254.000 46255.000 46256.000 46257.000 46264.000 46265.000 46266.000 46267.000 46268.000 46269.000 46400.000 46401.000 46402.000 46403.000 46404.000 46405.000
www.erco.com
522 524 524 526 526 528 528 531 532 532 532 298 300 297 299 518 518 520 520 518 520 523 525 527 529 533 533 301 301 301 300 300 301 302 303 303 302 302 302 509 285 285 286 286 317 317 287 287 287 287 318 318 285 285 286 286 440 440 442 442 444 444 440 440 443 443 445 445 509 519 519 521 521 519 521 523 525 527 529 533 533 304 304 304 303 303 304 554 553 556 555 553 555
No. 46406.000 46407.000 46408.000 46409.000 46410.000 46411.000 46412.000 46413.000 46415.000 46416.000 46417.000 46418.000 46419.000 46420.000 46423.000 46424.000 46425.000 46426.000 46427.000 46428.000 46429.000 46430.000 46435.000 46436.000 46437.000 46438.000 46441.000 46442.000 46443.000 46444.000 46445.000 46446.000 46447.000 46448.000 46449.000 46450.000 46451.000 46452.000 46453.000 46454.000 46455.000 46456.000 46457.000 46458.000 46459.000 46460.000 46461.000 46463.000 46464.000 46465.000 46466.000 46467.000 46468.000 46500.000 46501.000 46502.000 46503.000 46504.000 46505.000 46506.000 46507.000 46508.000 46509.000 46510.000 46511.000 46512.000 46513.000 46514.000 46515.000 46516.000 46517.000 46518.000 46519.000 46520.000 46521.000 46522.000 46523.000 46524.000 46525.000 46526.000 46527.000 46528.000 46529.000 46530.000 46531.000 46600.000 46601.000 46602.000 46603.000 46604.000 46605.000 46606.000 46607.000
page 569 574 558 557 561 560 558 561 570 575 542 541 543 543 546 544 548 546 550 549 552 550 545 547 549 551 541 567 568 572 573 577 578 582 583 588 589 589 590 310 310 311 308 309 309 542 544 587 588 306 308 305 307 579 584 590 591 580 585 591 592 313 313 314 311 312 312 564 563 566 564 563 565 571 576 581 586 593 593 316 316 317 314 315 315 604 605 604 605 605 607 606 607
No. 46608.000 46609.000 46610.000 46611.000 46612.000 46613.000 46614.000 46615.000 46616.000 46617.000 46618.000 46619.000 46620.000 46621.000 46622.000 46623.000 46624.000 46625.000 46626.000 46627.000 46628.000 46629.000 46630.000 46631.000 46632.000 46633.000 46634.000 46635.000 46636.000 46637.000 46638.000 46639.000 46640.000 46641.000 46642.000 46643.000 46644.000 46645.000 46646.000 46647.000 46648.000 46649.000 46650.000 46651.000 46652.000 46653.000 46654.000 46655.000 46656.000 46657.000 46658.000 46659.000 46660.000 46661.000 46662.000 46663.000 46664.000 46665.000 46666.000 46667.000 46668.000 46669.000 46670.000 46671.000 46672.000 46673.000 46674.000 46675.000 46676.000 46677.000 46678.000 46679.000 46700.000 46701.000 46702.000 46703.000 46704.000 46705.000 46706.000 46707.000 46708.000 46709.000 46710.000 46711.000 46712.000 46713.000 46714.000 46715.000 46716.000 46717.000 46718.000 46719.000 46720.000
page 606 607 605 607 606 607 606 607 608 609 608 608 608 609 608 608 604 604 604 604 605 606 605 606 610 610 612 612 610 610 610 610 610 610 613 613 613 613 613 613 611 611 611 611 614 614 614 614 609 609 611 611 610 610 612 612 615 615 615 616 616 615 616 616 616 616 616 616 615 615 615 615 447 447 450 449 320 320 454 454 457 457 320 320 462 462 448 448 451 451 291 292 453
No. 46721.000 46722.000 46723.000 46724.000 46725.000 46726.000 46727.000 46728.000 46729.000 46730.000 46731.000 46732.000 46733.000 46734.000 46735.000 46736.000 46737.000 46738.000 46739.000 46740.000 46741.000 46742.000 46743.000 46744.000 46745.000 46746.000 46747.000 46748.000 46749.000 46750.000 46751.000 46752.000 46753.000 46754.000 46755.000 46756.000 46757.000 46758.000 46759.000 46761.000 46762.000 46763.000 46764.000 46765.000 46766.000 46767.000 46768.000 46769.000 46770.000 46771.000 46772.000 46773.000 46774.000 46775.000 46776.000 46777.000 46778.000 46779.000 46780.000 46781.000 46782.000 46783.000 46784.000 46785.000 46786.000 46787.000 46788.000 46789.000 46790.000 46791.000 46792.000 46793.000 46794.000 46795.000 46796.000 46797.000 46798.000 46800.000 46801.000 46802.000 46803.000 46804.000 46805.000 46808.000 46809.000 46810.000 46811.000 46812.000 46813.000 46814.000 46815.000 46816.000 46817.000
page 452 456 455 291 292 461 461 471 471 477 477 474 473 479 479 472 472 478 478 291 291 292 292 293 293 293 293 482 482 484 484 483 483 495 495 495 495 497 497 468 468 481 481 465 466 480 480 467 467 474 475 485 485 470 470 475 476 486 486 490 489 490 489 488 487 488 488 493 493 493 493 491 491 491 491 497 497 464 465 447 447 450 450 455 455 458 458 460 460 463 463 449 449
No. 46818.000 46819.000 46822.000 46823.000 46824.000 46825.000 46826.000 46827.000 46828.000 46829.000 46830.000 46831.000 46832.000 46833.000 46834.000 46835.000 46836.000 46837.000 46838.000 46839.000 46840.000 46841.000 46842.000 46843.000 46844.000 46845.000 46846.000 46847.000 46848.000 46849.000 46850.000 46851.000 46852.000 46853.000 46854.000 46855.000 46856.000 46857.000 46858.000 46859.000 46860.000 46861.000 46862.000 46863.000 46864.000 46865.000 46866.000 46867.000 46868.000 46869.000 46870.000 46871.000 46872.000 46873.000 46874.000 46875.000 46876.000 46877.000 46878.000 46879.000 46880.000 46881.000 46882.000 46883.000 46884.000 46885.000 46886.000 46887.000 46888.000 46889.000 46890.000 46891.000 46892.000 46893.000 46894.000 46895.000 46896.000 46897.000 46898.000 46899.000 46900.000 46901.000 46902.000 46903.000 46904.000 46905.000 46906.000 46907.000 46908.000 46909.000 46910.000 46911.000 46912.000
page 452 452 453 453 456 456 459 459 461 461 472 472 477 477 474 474 479 479 473 473 478 478 294 294 295 295 296 296 296 296 485 482 482 484 484 483 483 496 496 496 496 469 469 481 481 466 466 480 480 468 468 475 475 486 486 470 470 476 476 487 487 321 322 321 322 294 295 294 295 490 490 490 490 489 488 489 488 494 494 494 494 492 492 492 492 498 498 498 498 288 288 289 289
No.
page
46913.000 46914.000 46915.000 46916.000 46917.000 46918.000 46919.000 46920.000 46921.000 46922.000 46923.000 46924.000 46925.000 46926.000 46927.000 46928.000 46929.000 46930.000 46931.000 46932.000 46933.000 46934.000 46935.000 46936.000
318 318 290 290 290 290 319 319 288 288 289 289 441 441 443 443 446 445 442 441 444 444 446 446
47000.000 47001.000 47002.000 47003.000 47004.000 47005.000 47009.000 47010.000 47011.000 47012.000 47013.000 47014.000 47015.000 47016.000 47017.000 47018.000 47021.000 47022.000 47023.000 47024.000 47025.000 47026.000 47028.000 47029.000 47030.000 47031.000 47032.000 47033.000 47034.000 47035.000 47036.000 47037.000 47038.000 47039.000 47040.000 47041.000 47042.000 47043.000 47044.000 47045.000 47046.000 47047.000 47048.000 47049.000 47050.000 47051.000 47052.000 47053.000 47054.000 47055.000 47056.000 47057.000 47058.000 47059.000 47060.000 47061.000 47062.000 47063.000 47064.000 47065.000 47066.000 47067.000 47068.000 47069.000 47100.000 47101.000 47102.000 47103.000
510 510 511 512 511 512 530 531 513 513 514 514 515 515 516 516 517 517 513 514 515 516 517 509 522 522 524 524 526 526 528 528 531 532 532 532 298 300 297 299 518 518 520 520 518 520 523 525 527 529 533 533 301 301 301 300 301 301 303 303 303 302 302 302 285 285 286 286
No.
page
47104.000 47105.000 47106.000 47107.000 47108.000 47109.000 47110.000 47111.000 47112.000 47113.000 47114.000 47115.000 47116.000 47117.000 47118.000 47119.000 47120.000 47121.000 47122.000 47123.000 47124.000 47125.000 47126.000 47127.000 47229.000 47246.000 47247.000 47248.000 47249.000 47250.000 47251.000 47252.000 47253.000 47254.000 47255.000 47256.000 47257.000 47264.000 47265.000 47266.000 47267.000 47268.000 47269.000 47400.000 47401.000 47402.000 47403.000 47406.000 47407.000 47408.000 47409.000 47410.000 47411.000 47412.000 47413.000 47418.000 47419.000 47420.000 47421.000 47424.000 47425.000 47426.000 47427.000 47428.000 47429.000 47430.000 47431.000 47432.000 47433.000 47434.000 47435.000 47436.000 47437.000 47438.000 47439.000 47440.000 47441.000 47442.000 47443.000 47444.000 47446.000 47447.000 47448.000 47449.000 47450.000 47451.000 47452.000 47453.000 47454.000 47455.000 47456.000 47457.000 47458.000
317 317 287 287 287 287 318 318 285 285 286 286 440 440 442 442 445 445 441 441 443 443 445 445 509 519 519 521 521 519 521 523 525 527 529 533 533 304 304 304 303 303 304 542 542 543 543 546 545 548 547 550 549 552 551 545 547 549 551 541 567 568 572 573 577 578 582 583 589 590 589 590 310 310 311 309 309 309 542 544 587 588 306 308 305 307 554 553 556 555 553 555 569
No. 47459.000 47460.000 47461.000 47462.000 47463.000 47464.000 47465.000 47467.000 47468.000 47500.000 47501.000 47502.000 47503.000 47504.000 47505.000 47506.000 47507.000 47508.000 47509.000 47510.000 47511.000 47512.000 47513.000 47514.000 47515.000 47516.000 47517.000 47518.000 47519.000 47520.000 47521.000 47522.000 47523.000 47524.000 47525.000 47526.000 47527.000 47528.000 47529.000 47530.000 47531.000 47600.000 47601.000 47602.000 47603.000 47604.000 47605.000 47606.000 47607.000 47608.000 47609.000 47610.000 47611.000 47612.000 47613.000 47614.000 47615.000 47616.000 47617.000 47618.000 47619.000 47620.000 47621.000 47622.000 47623.000 47624.000 47625.000 47626.000 47627.000 47628.000 47629.000 47630.000 47631.000 47632.000 47633.000 47634.000 47635.000 47636.000 47637.000 47638.000 47639.000 47640.000 47641.000 47642.000 47643.000 47644.000 47645.000 47646.000 47647.000 47648.000 47649.000 47650.000 47651.000
ERCO Program 2012
page 574 559 557 562 560 558 561 570 575 564 563 566 565 563 565 571 576 581 586 593 593 316 316 317 314 315 315 579 584 591 591 580 585 592 592 313 313 314 311 312 312 604 605 604 605 605 607 606 607 606 607 605 607 606 607 606 607 608 609 608 609 608 609 608 609 604 605 604 605 605 607 605 607 610 610 612 612 610 610 610 610 610 610 613 613 613 613 613 613 611 611 611 611
1071
Article number index No.
page
47652.000 47653.000 47654.000 47655.000 47656.000 47657.000 47658.000 47659.000 47660.000 47661.000 47662.000 47663.000 47664.000 47665.000 47666.000 47667.000 47668.000 47669.000 47670.000 47671.000 47672.000 47673.000 47674.000 47675.000 47676.000 47677.000 47678.000 47679.000 47700.000 47701.000 47702.000 47703.000 47704.000 47705.000 47706.000 47707.000 47708.000 47709.000 47710.000 47711.000 47712.000 47713.000 47714.000 47715.000 47716.000 47717.000 47718.000 47719.000 47720.000 47721.000 47722.000 47723.000 47724.000 47725.000 47726.000 47727.000 47728.000 47729.000 47730.000 47731.000 47732.000 47733.000 47734.000 47735.000 47736.000 47737.000 47738.000 47739.000 47740.000 47741.000 47742.000 47743.000 47744.000 47745.000 47746.000 47747.000 47748.000 47749.000 47750.000 47751.000 47752.000 47753.000 47754.000 47755.000 47756.000 47757.000 47758.000 47759.000 47761.000 47762.000 47763.000 47764.000 47765.000
1072
614 614 614 614 609 609 612 612 610 610 612 612 615 615 615 616 616 615 616 616 616 616 616 616 615 615 615 615 450 450 320 321 454 454 457 457 320 321 462 462 448 448 451 451 292 291 453 453 456 456 291 292 461 461 473 473 478 478 471 471 477 477 474 474 479 479 291 291 292 292 293 293 293 293 482 482 484 484 483 483 495 495 495 495 447 447 497 497 469 469 481 481 466
No. 47766.000 47767.000 47768.000 47769.000 47770.000 47771.000 47772.000 47773.000 47774.000 47775.000 47776.000 47777.000 47778.000 47779.000 47780.000 47781.000 47782.000 47783.000 47784.000 47785.000 47786.000 47787.000 47788.000 47789.000 47790.000 47791.000 47792.000 47793.000 47794.000 47795.000 47796.000 47797.000 47798.000 47800.000 47801.000 47802.000 47803.000 47806.000 47807.000 47808.000 47809.000 47810.000 47811.000 47812.000 47813.000 47814.000 47815.000 47816.000 47817.000 47820.000 47821.000 47822.000 47823.000 47824.000 47825.000 47826.000 47827.000 47828.000 47829.000 47830.000 47831.000 47832.000 47833.000 47834.000 47835.000 47836.000 47837.000 47838.000 47839.000 47840.000 47841.000 47842.000 47843.000 47844.000 47845.000 47846.000 47847.000 47848.000 47849.000 47850.000 47851.000 47852.000 47853.000 47854.000 47855.000 47856.000 47857.000 47858.000 47859.000 47860.000 47861.000 47862.000 47863.000
ERCO Program 2012
page 466 480 480 467 467 475 475 486 486 470 470 476 476 487 487 490 489 490 489 488 488 488 488 493 493 493 493 492 491 492 491 497 497 464 465 451 451 455 455 458 458 460 460 463 463 449 449 452 452 454 454 457 457 459 459 462 462 473 473 478 478 472 472 477 477 474 474 479 479 294 294 295 295 296 296 296 296 485 482 482 484 484 483 483 496 496 496 496 448 448 469 469 481
No.
page
47864.000 47865.000 47866.000 47867.000 47868.000 47869.000 47870.000 47871.000 47872.000 47873.000 47874.000 47875.000 47876.000 47877.000 47878.000 47879.000 47880.000 47881.000 47882.000 47883.000 47884.000 47885.000 47886.000 47887.000 47888.000 47889.000 47890.000 47891.000 47892.000 47893.000 47894.000 47895.000 47896.000 47897.000 47898.000 47899.000 47900.000 47901.000 47902.000 47903.000 47904.000 47905.000 47906.000 47907.000 47908.000 47909.000 47910.000 47911.000 47912.000 47913.000 47914.000 47915.000 47916.000 47917.000 47918.000 47919.000 47920.000 47921.000 47922.000 47923.000 47924.000 47925.000 47926.000 47927.000 47928.000 47929.000 47930.000 47931.000 47932.000 47933.000 47934.000 47935.000 47936.000
481 467 467 480 480 468 468 475 475 486 486 471 471 476 476 487 487 321 322 321 322 295 294 295 294 491 490 491 490 489 488 489 489 494 494 494 494 492 492 492 492 498 498 498 498 288 288 289 289 319 319 290 290 290 290 319 319 288 288 289 289 441 441 444 443 446 446 442 442 444 444 446 446
65040.000 65041.000 65042.000 65043.000 65044.000 65045.000 65046.000 65048.000 65059.000 65080.000 65081.000 65082.000
779 780 780 801 801 801 813 813 781 779 780 780
70313.000 70607.000 70608.000 70609.000
225 101 107 101
No.
page
70610.000 70620.000 70621.000 70647.000 70648.000 70649.000 70650.000 70651.000 70653.000 70654.000 70656.000 70657.000 70659.000 70660.000 70662.000 70663.000 70665.000 70666.000 70668.000 70669.000 70671.000 70672.000 70673.000 70675.000 70676.000 70677.000 70688.000 70689.000 70692.000
107 119 119 119 138 329 536 536 600 600 536 536 536 536 536 536 536 536 536 536 600 536 536 600 536 536 119 119 219
72003.000 72004.000 72007.000 72008.000 72009.000 72012.000 72013.000 72014.000 72015.000 72016.000 72017.000 72018.000 72019.000 72020.000 72021.000 72022.000 72023.000 72024.000 72025.000 72026.000 72027.000 72028.000 72029.000 72030.000 72031.000 72032.000 72033.000 72035.000 72036.000 72037.000 72038.000 72039.000 72040.000 72041.000 72042.000 72043.000 72044.000 72045.000 72046.000 72047.000 72048.000 72049.000 72050.000 72051.000 72052.000 72053.000 72054.000 72055.000 72056.000 72057.000 72058.000 72059.000 72060.000 72061.000 72062.000 72063.000 72064.000 72065.000 72066.000 72067.000 72068.000 72069.000 72070.000
245 245 245 245 246 246 246 247 245 245 255 248 248 246 246 255 248 249 246 249 255 255 257 247 248 249 249 248 248 257 248 248 249 249 247 247 247 247 256 256 244 244 247 247 247 247 256 256 256 256 245 245 248 248 248 248 248 248 257 257 249 249 249
No. 72071.000 72072.000 72073.000 72074.000 72075.000 72076.000 72077.000 72078.000 72079.000 72080.000 72081.000 72082.000 72083.000 72084.000 72085.000 72086.000 72087.000 72088.000 72089.000 72090.000 72091.000 72092.000 72093.000 72094.000 72095.000 72096.000 72097.000 72098.000 72099.000 72100.000 72101.000 72102.000 72103.000 72104.000 72106.000 72107.000 72110.000 72111.000 72112.000 72113.000 72116.000 72117.000 72120.000 72121.000 72122.000 72123.000 72130.000 72131.000 72132.000 72133.000 72134.000 72135.000 72136.000 72139.000 72150.000 72151.000 72152.000 72153.000 72154.000 72155.000 72156.000 72157.000 72158.000 72159.000 72160.000 72161.000 72162.000 72163.000 72164.000 72165.000 72198.000 72199.000 72400.000 72401.000 72402.000 72403.000 72404.000 72405.000 72406.000 72407.000 72408.000 72409.000 72410.000 72411.000 72412.000 72413.000 72414.000 72415.000 72416.000 72417.000 72418.000 72419.000 72420.000
page 249 249 249 257 257 243 243 244 243 243 243 244 243 243 243 244 244 243 243 244 244 254 254 254 254 255 255 255 255 213 213 215 220 218 217 221 213 213 215 220 217 221 213 213 215 220 214 216 214 214 216 218 217 221 252 252 252 252 252 252 252 252 243 243 243 243 244 244 244 244 248 248 132 135 132 132 132 132 139 142 134 134 134 134 140 143 133 133 133 133 139 142 133
No. 72421.000 72422.000 72423.000 72424.000 72425.000 72426.000 72427.000 72428.000 72429.000 72430.000 72431.000 72432.000 72433.000 72434.000 72435.000 72436.000 72437.000 72438.000 72439.000 72440.000 72441.000 72442.000 72443.000 72444.000 72445.000 72450.000 72451.000 72452.000 72453.000 72454.000 72455.000 72456.000 72457.000 72458.000 72459.000 72460.000 72461.000 72462.000 72463.000 72464.000 72465.000 72466.000 72467.000 72468.000 72469.000 72470.000 72471.000 72472.000 72473.000 72474.000 72475.000 72476.000 72477.000 72478.000 72479.000 72480.000 72481.000 72482.000 72483.000 72484.000 72485.000 72486.000 72487.000 72488.000 72489.000 72490.000 72491.000 72492.000 72493.000 72494.000 72495.000 72500.000 72501.000 72502.000 72503.000 72504.000 72505.000 72506.000 72507.000 72508.000 72509.000 72510.000 72511.000 72512.000 72513.000 72514.000 72515.000 72516.000 72517.000 72518.000 72519.000 72520.000 72521.000
page 133 134 134 140 143 135 135 135 135 140 143 136 137 137 137 141 144 136 136 135 135 136 136 140 143 132 135 132 132 132 132 139 142 134 134 134 134 140 143 133 133 133 133 139 142 133 133 134 134 140 143 135 135 135 135 140 143 136 137 137 137 141 144 136 136 135 135 136 136 140 143 131 131 131 139 141 131 131 131 139 141 131 131 131 139 141 131 131 131 139 141 131 131
No. 72522.000 72523.000 72602.000 72603.000 72604.000 72605.000 72606.000 72607.000 72616.000 72617.000 72618.000 72619.000 72620.000 72621.000 72628.000 72629.000 72630.000 72631.000 72632.000 72633.000 72634.000 72635.000 72636.000 72637.000 72638.000 72639.000 72640.000 72641.000 72642.000 72643.000 72644.000 72645.000 72646.000 72647.000 72648.000 72649.000 72650.000 72651.000 72652.000 72653.000 72654.000 72655.000 72656.000 72657.000 72658.000 72659.000 72660.000 72661.000 72662.000 72663.000 72664.000 72665.000 72666.000 72667.000 72668.000 72669.000 72670.000 72671.000 72672.000 72673.000 72674.000 72675.000 72676.000 72677.000 72678.000 72679.000 72680.000 72681.000 72682.000 72683.000 72684.000 72685.000 72686.000 72687.000 72688.000 72689.000 72690.000 72691.000 72692.000 72693.000 72694.000 72695.000 72696.000 72697.000 72698.000 72699.000 72700.000 72701.000 72702.000 72703.000 72704.000 72705.000 72706.000
page 131 131 117 117 117 117 122 126 117 117 117 117 122 126 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 120 120 120 120 123 123 123 123 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 113 120 120 120 120 124 124 124 124 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 121 121 121 121 124 124 124 124 121 121 125 125 115 115 115
No.
page
72707.000 72708.000 72709.000 72710.000 72711.000 72712.000 72713.000 72714.000 72715.000 72716.000 72717.000 72718.000 72719.000 72720.000 72721.000 72722.000 72723.000 72724.000 72725.000 72726.000 72727.000 72728.000 72729.000 72730.000 72731.000 72732.000 72733.000 72734.000 72735.000 72736.000 72737.000 72738.000 72739.000 72740.000 72741.000 72742.000 72743.000 72744.000 72745.000 72794.000 72795.000 72796.000 72797.000 72798.000 72799.000 72800.000 72801.000 72802.000 72803.000 72804.000 72805.000 72806.000 72807.000 72808.000 72809.000 72810.000 72811.000 72812.000 72813.000 72814.000 72815.000 72816.000 72817.000 72818.000 72819.000 72820.000 72821.000 72822.000 72823.000 72824.000 72825.000 72826.000 72827.000 72828.000 72829.000 72830.000 72831.000 72832.000 72833.000 72834.000 72835.000 72836.000 72837.000 72838.000 72839.000 72840.000 72841.000 72842.000 72843.000 72844.000 72845.000 72846.000 72847.000
115 115 115 116 116 116 117 122 126 116 116 116 117 122 126 115 116 116 116 122 126 115 116 116 116 122 126 116 116 116 116 122 126 116 116 116 116 122 126 100 100 100 100 100 100 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 102 102 102 102 104 104 104 104 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 102 102 102 102 105 105 105 105
www.erco.com
Article number index No.
page
72848.000 72849.000 72850.000 72851.000 72852.000 72853.000 72854.000 72855.000 72856.000 72857.000 72858.000 72859.000 72860.000 72861.000 72862.000 72863.000 72864.000 72865.000 72866.000 72867.000 72868.000 72869.000 72870.000 72871.000 72872.000 72873.000 72874.000 72875.000 72876.000 72877.000 72878.000 72879.000 72880.000 72881.000 72882.000 72883.000 72884.000 72885.000 72886.000 72887.000 72888.000 72889.000 72890.000 72891.000 72892.000 72893.000 72894.000 72895.000
98 98 98 98 98 98 98 98 98 98 98 98 103 103 103 103 105 105 105 105 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 103 103 103 103 106 106 106 106 104 104 106 106
73220.000 73233.000 73270.000 73273.000 73274.000 73275.000 73460.000 73461.000 73462.000 73463.000 73464.000 73465.000 73466.000 73467.000 73500.000 73501.000 73504.000 73505.000 73510.000 73511.000 73512.000 73513.000 73516.000 73517.000 73524.000 73525.000 73530.000 73531.000 73540.000 73541.000 73550.000 73551.000 73552.000 73553.000 73554.000 73555.000 73556.000 73557.000 73564.000 73565.000 73570.000 73571.000 73600.000 73601.000
239 804 804 239 239 805 235 235 235 235 235 235 236 236 265 265 264 264 264 264 265 265 264 264 266 266 267 267 273 273 269 269 273 273 271 271 272 272 274 274 275 275 266 266
www.erco.com
No.
page
73605.000 73606.000 73611.000 73612.000 73615.000 73616.000 73621.000 73622.000 73623.000 73624.000 73625.000 73626.000 73750.000 73751.000 73752.000 73753.000 73754.000 73755.000 73756.000 73758.000 73759.000 73768.000 73773.000 73821.000 73822.000 73824.000 73825.000 73830.000 73831.000 73836.000
266 266 274 274 274 274 265 265 270 270 273 273 229 229 228 228 232 232 228 228 228 258 258 229 229 230 230 233 233 231
74390.000 74391.000 74392.000 74393.000 74394.000 74395.000 74400.000 74401.000 74402.000 74403.000 74404.000 74405.000 74406.000 74407.000 74408.000 74409.000 74416.000 74417.000 74418.000 74419.000 74420.000 74425.000 74430.000 74431.000 74432.000 74433.000 74434.000 74435.000 74436.000 74437.000 74438.000 74439.000 74442.000 74443.000 74447.000 74448.000 74449.000 74450.000 74451.000 74452.000 74453.000 74454.000 74455.000 74456.000 74457.000 74458.000 74459.000 74460.000 74461.000 74462.000 74463.000 74464.000 74465.000 74466.000 74468.000 74469.000 74470.000 74471.000 74472.000 74473.000 74474.000 74475.000
230 230 232 232 232 230 237 237 885 885 885 160 160 885 222 222 230 230 230 230 160 160 237 119 119 119 119 237 237 885 885 885 251 222 160 160 160 160 160 160 160 160 119 119 119 119 268 268 268 268 268 268 268 268 268 268 160 268 268 268 268 268
No.
page
74476.000 74477.000 74478.000 74479.000 74480.000 74481.000 74482.000 74483.000 74484.000 74485.000 74486.000 74487.000 74488.000 74489.000 74492.000 74493.000 74494.000 74495.000 74496.000 74497.000 74498.000 74499.000 74759.000 74800.000 74801.000 74805.000 74806.000 74820.000 74825.000 74830.000 74835.000 74836.000 74880.000 74881.000 74882.000 74883.000 74884.000 74885.000 74886.000 74887.000 74888.000
268 268 268 268 268 268 119 119 160 160 160 160 119 119 885 885 885 885 885 885 885 885 231 237 237 160 160 160 160 237 237 237 219 219 219 219 219 219 219 219 219
75594.000 75595.000 75596.000 75597.000 75598.000 75599.000 75600.000 75601.000 75602.000 75603.000 75604.000 75605.000 75606.000 75607.000 75608.000 75609.000 75610.000 75611.000 75612.000 75613.000 75614.000 75615.000 75616.000 75617.000 75618.000 75619.000 75620.000 75621.000 75622.000 75623.000 75624.000 75625.000 75626.000 75627.000 75628.000 75629.000 75640.000 75641.000 75642.000 75643.000 75644.000 75645.000 75646.000 75647.000 75648.000 75649.000 75650.000 75651.000 75652.000 75653.000 75654.000
153 153 153 153 153 153 156 156 156 156 171 156 156 156 156 171 156 156 156 156 171 156 156 156 156 171 157 157 157 157 171 157 157 157 157 171 157 157 157 157 171 157 157 157 157 171 154 154 154 154 154
No. 75656.000 75657.000 75658.000 75659.000 75661.000 75662.000 75663.000 75664.000 75665.000 75666.000 75667.000 75668.000 75669.000 75670.000 75671.000 75672.000 75673.000 75674.000 75675.000 75676.000 75677.000 75678.000 75679.000 75680.000 75681.000 75682.000 75683.000 75684.000 75685.000 75686.000 75687.000 75688.000 75689.000 75690.000 75691.000 75692.000 75693.000 75694.000 75695.000 75698.000 75699.000 75700.000 75701.000 75702.000 75703.000 75704.000 75705.000 75706.000 75707.000 75708.000 75709.000 75710.000 75711.000 75784.000 75785.000 75786.000 75787.000 75800.000 75801.000 75802.000 75803.000 75804.000 75805.000 75806.000 75807.000 75808.000 75809.000 75810.000 75811.000 75812.000 75813.000 75814.000 75815.000 75816.000 75817.000 75818.000 75819.000 75820.000 75821.000 75822.000 75823.000 75824.000 75825.000 75827.000 75828.000 75829.000 75830.000 75831.000 75832.000 75833.000 75834.000 75835.000 75836.000
page 170 154 154 154 170 154 155 155 155 170 154 155 155 155 170 155 155 155 155 170 155 155 155 155 170 166 166 166 166 167 167 167 167 167 167 168 168 167 167 163 163 163 163 164 164 163 163 162 162 162 162 163 163 150 150 150 150 160 160 150 150 150 150 150 150 150 150 150 150 150 150 160 160 160 160 164 164 164 164 151 151 151 160 151 151 151 160 160 151 151 151 151 151
No.
page
75837.000 75838.000 75839.000 75840.000 75841.000 75857.000 75858.000 75859.000 75860.000 75861.000 75862.000 75863.000 75864.000 75865.000 75866.000 75867.000 75868.000 75869.000 75870.000 75871.000 75872.000 75873.000 75874.000 75875.000 75876.000 75877.000 75878.000 75879.000 75880.000 75881.000 75882.000 75883.000 75884.000 75885.000 75886.000 75887.000 75888.000 75889.000 75890.000 75891.000 75892.000 75893.000 75894.000 75895.000 75896.000 75897.000 75905.000 75906.000 75926.000 75927.000 75928.000 75929.000 75930.000 75931.000 75935.000 75940.000 75941.000 75942.000 75943.000
151 151 151 151 151 268 268 268 268 268 161 161 161 161 165 165 165 165 152 152 152 152 152 152 152 152 152 152 152 152 161 161 161 161 165 165 165 165 152 152 152 152 162 162 166 166 160 160 199 199 199 199 199 199 160 160 160 268 268
76400.000 76401.000 76403.000 76404.000 76406.000 76407.000 76409.000 76410.000 76412.000 76413.000 76415.000 76416.000 76418.000 76419.000 76421.000 76422.000 76424.000 76425.000 76427.000 76428.000 76430.000 76431.000 76433.000 76434.000 76436.000 76437.000 76439.000 76440.000 76442.000 76443.000 76445.000 76446.000 76448.000
181 181 181 181 181 181 209 209 182 182 182 182 182 182 182 182 209 209 180 180 180 180 180 180 208 208 183 183 183 183 183 183 183
No. 76449.000 76451.000 76452.000 76454.000 76455.000 76457.000 76458.000 76460.000 76461.000 76463.000 76464.000 76466.000 76467.000 76469.000 76470.000 76472.000 76473.000 76475.000 76476.000 76478.000 76479.000 76481.000 76482.000 76484.000 76485.000 76487.000 76488.000 76490.000 76491.000 76493.000 76494.000 76496.000 76497.000 76499.000 76500.000 76502.000 76503.000 76505.000 76506.000 76508.000 76509.000 76511.000 76512.000 76529.000 76530.000 76531.000 76532.000 76533.000 76534.000 76535.000 76536.000 76537.000 76538.000 76539.000 76540.000 76541.000 76542.000 76543.000 76544.000 76545.000 76546.000 76547.000 76548.000 76550.000 76551.000 76552.000 76553.000 76554.000 76555.000 76556.000 76557.000 76558.000 76559.000 76560.000 76561.000 76562.000 76563.000 76564.000 76565.000 76566.000 76567.000 76568.000 76569.000 76570.000 76571.000 76572.000 76573.000 76574.000 76575.000 76576.000 76577.000 76578.000 76579.000
page 183 210 210 183 183 183 183 183 183 183 183 210 210 180 180 180 180 180 180 180 180 209 209 184 184 184 184 184 184 184 184 210 210 181 181 181 181 181 181 181 181 209 209 182 182 182 182 182 182 182 182 210 210 182 182 179 179 202 202 202 202 202 202 194 194 198 198 197 197 193 193 197 197 198 198 190 190 196 196 195 195 189 189 195 195 196 196 192 192 191 191 203 203
No.
page
76580.000 76581.000 76582.000 76583.000 76584.000 76585.000 76586.000 76587.000 76588.000 76589.000 76590.000 76591.000 76592.000 76593.000 76594.000 76595.000 76596.000 76597.000 76598.000 76599.000 76600.000 76601.000 76602.000 76603.000 76604.000 76605.000 76606.000 76607.000 76608.000 76609.000 76610.000 76611.000 76612.000 76613.000 76614.000 76615.000 76616.000 76617.000 76618.000 76619.000 76620.000 76621.000 76622.000 76623.000 76624.000 76625.000 76626.000 76627.000 76628.000 76629.000 76630.000 76631.000 76632.000 76633.000 76634.000 76635.000 76636.000 76637.000 76638.000 76639.000 76640.000 76641.000 76642.000 76643.000 76644.000 76645.000 76646.000 76647.000 76648.000 76649.000 76650.000 76651.000 76652.000 76653.000 76654.000 76655.000 76656.000 76657.000
206 206 206 206 206 206 207 207 207 207 207 207 205 205 205 205 206 206 203 203 203 203 201 201 201 201 201 201 184 184 184 184 185 185 185 185 203 203 178 178 179 178 178 178 179 178 178 178 179 179 178 178 179 179 204 204 204 204 205 205 205 205 200 200 200 200 200 200 200 200 178 178 178 178 179 179 179 179
77185.000 77196.000 77198.000 77201.000 77231.000 77246.000 77707.000 77709.000 77712.000 77722.000 77738.000 77739.000 77743.000 77744.000
219 119 119 224 224 225 260 260 260 261 259 259 259 259
No.
page
77746.000 77747.000 77748.000 77749.000 77752.000 77753.000 77756.000 77758.000 77761.000 77762.000 77763.000 77764.000 77792.000 77793.000 77802.000 77809.000
259 259 253 253 253 253 259 259 260 260 253 253 254 254 253 253
78301.000 78302.000 78303.000 78304.000 78323.000 78341.000 78342.000 78343.000 78344.000 78350.000 78353.000 78361.000 78362.000 78363.000 78364.000 78633.000 78651.000 78652.000 78670.000 78671.000
54 54 54 54 62 54 54 54 54 60 62 54 54 54 54 60 60 60 60 60
79023.000 79024.000 79030.000 79031.000 79036.000 79037.000 79038.000 79039.000 79047.000 79048.000 79052.000 79053.000 79054.000 79055.000 79092.000 79093.000 79094.000 79095.000 79200.000 79201.000 79204.000 79206.000 79207.000 79208.000 79209.000 79210.000 79211.000 79220.000 79221.000 79224.000 79226.000 79227.000 79228.000 79229.000 79230.000 79231.000 79240.000 79241.000 79243.000 79244.000 79245.000 79246.000 79247.000 79248.000 79260.000 79261.000 79263.000 79264.000 79265.000 79266.000 79267.000 79268.000 79300.000 79301.000 79302.000
59 59 59 59 59 59 59 59 57 57 59 59 59 59 57 57 57 57 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 58 58 56
ERCO Program 2012
1073
Article number index No.
page
79304.000 79306.000 79307.000 79308.000 79309.000 79310.000 79311.000 79315.000 79320.000 79321.000 79322.000 79324.000 79326.000 79327.000 79328.000 79329.000 79330.000 79331.000 79335.000 79340.000 79341.000 79343.000 79344.000 79345.000 79346.000 79347.000 79348.000 79360.000 79361.000 79363.000 79364.000 79365.000 79366.000 79367.000 79368.000 79500.000 79501.000 79503.000 79504.000 79515.000 79527.000 79528.000 79530.000 79546.000 79547.000 79548.000 79549.000 79550.000 79551.000 79555.000 79556.000 79560.000 79561.000 79565.000 79566.000 79570.000 79571.000
58 58 58 58 58 58 58 56 58 58 56 58 58 58 58 58 58 58 56 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 60 60 61 61 60 61 61 61 76 61 61 61 60 60 60 60 60 60 60 60 60 60
81010.000 81011.000
995 1000
1074
No.
page
No.
81012.000 81020.000 81021.000 81026.000 81027.000 81029.000 81032.000 81033.000 81034.000 81035.000 81036.000 81037.000 81038.000 81039.000 81040.000 81042.000 81043.000 81044.000 81045.000 81046.000 81047.000 81048.000 81049.000 81050.000 81051.000 81052.000 81053.000 81055.000 81059.000 81202.000 81203.000 81204.000 81205.000 81206.000 81207.000 81208.000 81209.000 81210.000 81211.000 81212.000 81213.000 81214.000 81215.000 81216.000 81217.000 81218.000 81219.000 81220.000 81221.000 81222.000 81223.000 81224.000 81225.000 81226.000 81227.000 81228.000 81229.000 81230.000 81231.000 81232.000 81233.000
995 996 1000 996 1001 997 994 994 994 994 994 995 994 995 996 997 1001 999 1000 999 1000 998 998 997 1001 998 998 999 999 383 385 382 383 383 383 389 392 384 385 385 385 390 393 383 383 384 384 389 392 385 386 386 386 390 393 384 384 384 384 389 392
81234.000 81235.000 81236.000 81237.000 81238.000 81239.000 81240.000 81241.000 81242.000 81243.000 81244.000 81245.000 81246.000 81247.000 81248.000 81249.000 81253.000 81254.000 81258.000 81259.000 81263.000 81264.000 81268.000 81271.000 81275.000 81276.000 81277.000 81278.000 81279.000 81281.000 81282.000 81283.000 81284.000 81285.000 81286.000 81287.000 81288.000 81289.000 81290.000 81291.000 81292.000 81293.000 81450.000 81451.000 81452.000 81453.000 81454.000 81455.000 81456.000 81457.000 81462.000 81463.000
386 387 387 387 387 390 393 393 381 382 382 388 391 381 382 382 388 391 381 382 382 388 391 748 381 382 382 388 391 748 388 391 388 391 388 391 388 391 381 381 381 381 279 279 280 280 279 279 281 281 280 281
82950.000 82952.000
330 758
83260.000 83261.000 83264.000 83265.000 83266.000
770 769 771 769 752
ERCO Program 2012
page
No.
page
No.
page
No.
page
No.
page
83267.000 83271.000 83273.000 83275.000 83276.000 83280.000 83281.000 83282.000 83283.000 83287.000 83288.000 83289.000 83474.000 83475.000 83478.000 83479.000 83481.000 83482.000 83484.000 83489.000 83493.000 83516.000 83517.000 83569.000 83572.000 83577.000 83578.000 83579.000 83580.000 83581.000 83582.000 83584.000 83589.000 83594.000 83595.000 83596.000 83597.000 83598.000 83599.000 83610.000 83611.000 83612.000 83613.000 83614.000 83615.000 83617.000 83618.000 83619.000 83630.000 83631.000 83632.000 83633.000 83634.000 83635.000 83637.000 83638.000 83639.000 83643.000 83655.000 83656.000 83657.000
753 770 770 770 754 755 755 755 756 752 753 754 773 775 773 775 773 775 774 774 774 779 779 776 776 505 766 414 414 1002 757 414 771 1002 330 330 330 667 377 504 330 536 330 330 619 330 619 377 666 377 666 377 377 746 377 746 377 666 329 329 600
83658.000 83659.000 83669.000 83679.000 83691.000 83692.000 83693.000 83694.000 83695.000 83696.000 83697.000 83716.000 83718.000 83719.000 83727.000 83773.000 83774.000 83811.000 83812.000 83814.000 83816.000 83817.000 83819.000 83829.000 83831.000 83833.000 83927.000 83928.000 83929.000 83951.000 83952.000 83954.000 83955.000 83956.000 83959.000 83967.000 83968.000 83969.000 83978.000 83979.000 83980.000 83985.000 83986.000 83992.000 83993.000 83994.000 83997.000 83998.000 83999.000
329 329 329 413 328 328 328 46 46 504 46 504 46 328 504 414 758 414 758 46 46 46 330 46 328 329 1030 1030 1030 758 414 749 776 414 414 776 377 377 1002 1002 330 1030 1030 1030 1030 1030 1002 1030 377
85044.000 85045.000 85048.000 85049.000 85050.000 85051.000 85054.000 85057.000 85060.000 85065.000 85070.000 85075.000 85085.000 85090.000 85100.000 85101.000 85102.000 85103.000 85104.000 85105.000 85106.000 85107.000 85108.000 85109.000 85110.000 85111.000 85112.000 85113.000 85114.000 85115.000 85588.000 85589.000 85592.000 85593.000 85594.000 85595.000
1012 1013 1011 1011 1014 1014 1014 1014 1013 1013 1015 1015 1015 1015 955 955 955 955 953 953 956 956 955 955 954 954 954 954 953 953 798 799 798 799 798 799
86035.000 86036.000 86037.000 86038.000 86039.000
796 796 796 796 796
87600.000 87602.000 87640.000
784 784 784
85022.000 85023.000 85024.000 85025.000 85026.000 85028.000 85029.000 85030.000 85035.000 85041.000 85043.000
956 957 957 1011 958 959 959 1012 1012 1011 1011
86008.000 86009.000 86010.000 86011.000 86012.000 86013.000 86014.000 86015.000 86016.000 86017.000 86018.000 86019.000 86020.000 86021.000 86022.000 86023.000 86024.000 86025.000 86027.000 86028.000 86029.000 86032.000 86033.000 86034.000
790 790 793 793 794 794 791 791 794 794 793 793 793 793 792 792 794 794 791 791 790 790 792 792
88100.000 88110.000 88111.000 88120.000 88130.000 88131.000 88135.000 88145.000 88146.000 88147.000 88148.000 88174.000 88175.000 88176.000 88177.000 88178.000 88179.000 88180.000 88181.000 88182.000 88183.000 88184.000 88185.000 88186.000 88187.000 88300.000 88301.000 88302.000 88303.000 88304.000 88305.000 88306.000 88307.000 88308.000 88309.000 88310.000 88311.000 88312.000 88313.000 88314.000 88315.000 88316.000 88317.000 88318.000 88319.000 88320.000 88321.000 88322.000 88323.000
410 410 410 410 411 411 411 412 412 412 412 402 402 402 403 403 404 406 402 402 403 403 404 404 406 400 400 400 400 401 401 401 401 404 404 405 405 400 400 400 400 401 401 401 401 405 405 405 405
89201.000
764
No.
page
89202.000 89203.000 89216.000 89217.000 89218.000 89221.000 89225.000 89226.000 89341.000 89351.000 89361.000 89371.000
764 763 763 762 762 760 762 761 760 761 760 761
www.erco.com
ERCO addresses Europe Belgium ERCO Lighting Bvba/sprl Leuvensesteenweg 369 bus 7 1932 Zaventem Belgium Tel.: +32 2 340 7220 Fax: +32 2 347 3882 info.be@erco.com
Finland ERCO Lighting AB c/o Agne Klawér Mensavägen 16 06750 Tolkis Finland Tel.: +358 400 718 407 a.klawer@erco.com
Bulgaria Altronics light 13 „6- th September“ Str. Sofia 1000 Bulgaria Tel.: +359 2 980 9061 Fax: +359 2 980 9061 office@altronicslight.com
France ERCO Lumières Eurl 6ter, rue des Saints- Pères 75007 Paris France
Denmark ERCO Lighting AB Representative Office Vesterbrogade 136 C, st. 1620 København V Denmark Tel.: +45 33 21 80 60 Fax: +45 33 21 80 64 info.dk@erco.com Germany ERCO Leuchten GmbH Postfach 2460 58505 Lüdenscheid Brockhauser Weg 80–82 58507 Lüdenscheid Germany Tel.: +49 2351 551 100 Fax: +49 2351 551 555 info.de@erco.com ERCO Leuchten GmbH Showroom Berlin Reichenberger Str. 113A 10999 Berlin Tel.: +49 30 769 967 0 Fax: +49 30 769 967 20 info.berlin@erco.com ERCO Leuchten GmbH Showroom Hamburg Osterfeldstraße 6 22529 Hamburg Tel.: +49 40 548 037 40 Fax: +49 40 548 037 429 info.hamburg@erco.com ERCO Leuchten GmbH Showroom Frankfurt Schwarzwaldstraße 78 60528 Frankfurt Tel.: +49 69 675 053 Fax: +49 69 670 275 5 info.frankfurt@erco.com ERCO Leuchten GmbH Showroom München Nymphenburger Str. 125 80636 München Tel.: +49 89 120 099 40 Fax: +49 89 120 099 499 info.muenchen@erco.com ERCO Leuchten GmbH Showroom Stuttgart Rotebühlstraße 87a 70178 Stuttgart Tel.: +49 711 933 475 90 Fax: +49 711 933 475 99 info.stuttgart@erco.com Estonia see Finland
www.erco.com
Groupe Paris – IIe de France Tel.: +33 1 44 77 84 71 Fax: +33 1 47 03 96 68 Groupe Régions Tel.: +33 1 44 77 84 75 Fax: +33 1 47 03 96 68 Groupe Architecture Commerciale Tel.: +33 1 44 77 84 70 Fax: +33 1 44 77 84 84 info.fr@erco.com Georgia Smart Way Ltd. 2 Mosashvili Str. 0179 Tbilisi Georgia Tel.: +995 32 30 88 81/82 Fax: +995 32 30 80 08 salome@swg.ge Greece Moda Light 17th klm Athens – Lamia 145 64 Kifisia – Athens Greece Tel.: +30 210 6253 802 Fax: +30 210 6253 826 info@modalight.gr Great Britain ERCO Lighting Ltd. 38 Dover Street London W1S 4NL Great Britain Tel.: +44 20 7344 4900 Fax: +44 20 7409 1530 info.uk@erco.com Ireland see Great Britain Iceland see Sweden Italy ERCO Illuminazione S.r.l. c/o Edificio Sedici Viale Sarca 336 F 20126 Milano Italy Tel.: +39 02 365 872 84 Fax: +39 02 643 7831 info.it@erco.com Croatia Ortoforma d.o.o. Kamenita 2 1000 Zagreb Croatia Tel.: +385 1 485 1489 Fax: +385 1 485 1489 ortoforma@ortoforma.hr Latvia Lithuania see Poland
Luxembourg see Germany Morocco ERCO Lumières Maroc Representative Office 174 bd Zerktouni 20100 Casablanca Morocco Mob.: +212 642 04 93 45 info.fr@erco.com Netherlands ERCO Lighting B.V. Gooimeer 13 1411 DE Naarden Netherlands Tel.: +31 35 699 1710 Fax: +31 35 694 6383 info.nl@erco.com Norway ERCO Lighting AS Kirkegata 5 0153 Oslo Postboks 771 Sentrum 0104 Oslo Norway Tel.: +47 2414 8200 Fax: +47 2414 8201 info.no@erco.com Austria ERCO Lighting GmbH Engerthstrasse 151/Loft e.6 1020 Wien Austria Tel.: +43 1 798 84 94 0 Fax: +43 1 798 84 95 info.at@erco.com Poland ERCO Lighting GmbH Przedstawicielstwo w Polsce ul. Bia∏y Kamieƒ 7 02-593 Warszawa Poland Tel.: +48 22 898 7845 Fax: +48 22 898 2939 info.pl@erco.com Portugal Omnicel Técnicas de Iluminação, S.A. Rua Castilho, 57- 5. Dto. 1250- 068 Lisboa Portugal Tel.: +351 21 381 3080 Fax: +351 21 381 3090 omnicel.lx@omnicel.pt Romania see Hungary Russia ERCO Lighting GmbH Representative Office Serebryanicheskiy per. 2/5 109028 Moskwa Russian Federation Tel.: +7 495 988 86 89 Fax: +7 495 988 86 89 info.ru@erco.com Armenia Belarus Moldova Tajikistan Ukraine see Russia
Sweden ERCO Lighting AB Birger Jarlsgatan 46 11429 Stockholm Sweden Tel.: +46 8 54 50 44 30 Fax: +46 8 54 50 44 39 info.se@erco.com Switzerland ERCO Lighting AG Trottenstrasse 7 8037 Zürich Switzerland Tel.: +41 44 215 28 10 Fax: +41 44 215 28 19 info.ch@erco.com Slovakia see Czech Republic Slovenia see Austria Spain ERCO Iluminación, S.A. c/ El Plà nº 47 08750 Molins de Rei, Barcelona Spain Tel.: +34 93 680 1110 Fax: +34 93 680 0546 info.es@erco.com Delegación Cataluña c/ El Plà nº 47 08750 Molins de Rei, Barcelona Spain Tel.: +34 93 680 1244 Fax: +34 93 680 2624 info.barcelona@erco.com Delegación Centro c/ Buen Suceso nº 13 28008 Madrid Spain Tel.: +34 91 542 6954 Fax: +34 91 559 0965 info.madrid@erco.com Delegación Levante c/ Profesor Beltrán Báguena nº 4 Oficina 216 46009 Valencia Spain Tel.: +34 963 318 105 Fax: +34 963 918 651 info.valencia@erco.com Czech Republic ERCO Lighting GmbH Organizaãní sloÏka Praha Jana Masaryka 3/456 120 00 Praha 2 Czech Republic Tel.: +420 2 225 111 16 Fax: +420 2 225 217 12 info.cz@erco.com Turkey ERCO Lighting GmbH Istanbul Irtibat Burosu Gumussuyu, Inonu Cad. Saadet apt. No:29 D:4 34437 Beyoglu – Istanbul Turkey Tel.: +90 212 249 06 10 Fax: +90 212 249 06 68 info.tr@erco.com Azerbaijan Kazakhstan Kirgistan Turkmenistan Uzbekistan see Turkey
ERCO Program 2012
1075
Europe
The Middle East
Southeast Asia
East Asia
Hungary ERCO Lighting GmbH Kereskedelmi Képviselet Irányi u. 1. mfsz. 2. 1056 Budapest Hungary Tel.: +36 1 266 0006 Fax: +36 1 266 0006 info.hu@erco.com
Dubai ERCO Lighting Pte. Ltd. Representative Office P.O. Box 62221 Dubai United Arab Emirates Tel.: +971 4 336 9798 Fax: +971 4 337 3746 info.ae@erco.com
Singapore ERCO Lighting Pte. Ltd. 93 Havelock Road #03- 532 Singapore 160093 Singapore Tel.: +65 6 227 3768 Fax: +65 6 227 8768 info.sg@erco.com
Cyprus J. N. Christofides Trading Ltd. Lighting Division P.O. Box 21093 1501 Nicosia 1c Kennedy Avenue 1075 Nicosia Cyprus Tel.: +357 22 813 042/3 Fax: +357 22 813 046 mail@jnc.com.cy
Abu Dhabi Bahrain Egypt India Jordan Kuwait Lebanon Oman Saudi- Arabia United Arab Emirates see Dubai
Bangladesh Brunei Cambodia Indonesia Laos Malaysia Myanmar Philippines Thailand Vietnam see Singapore
China ERCO GmbH Representative Office No B9, 102 Building 800 SHOW 800 Changde Road Jin'An District Shanghai 200040 P.R. China Tel.: +86 21 5030 5979 Fax: +86 21 5030 5879 info.cn@erco.com
Qatar ERCO Lighting Pte. Ltd. Representative Office P.O. Box 22059 Doha Qatar Tel.: +974 4 441 4290 Fax: +974 4 441 1240 info.ae@erco.com
ERCO Lighting Pte. Ltd. Representative Office Unit 413, 4th Floor Tower 2, Lippo Centre 89 Queensway, Admiralty Hong Kong P.R. China Tel.: +852 3165 8780 Fax: +852 3165 8790 info.hk@erco.com
North America
South America
Oceania
USA ERCO Lighting Inc. 160 Raritan Center Parkway Suite 10 Edison, NJ 08837 USA Tel.: +1 732 225 8856 Fax: +1 732 225 8857 info.us@erco.com
Argentina ERCO Iluminación, S.A. Oficina de Representación Av. Juana Manso 1124 C1107CBX Buenos Aires Argentina Tel.: +54 11 4313 1400 Fax: +54 11 4312 5465 info.ar@erco.com
Australia ERCO Lighting Pte. Ltd. Representative Office 349 Pacific Highway North Sydney NSW 2060 Australia Tel.: +61 2 9004 8801 Fax: +61 2 9004 8805 info.au@erco.com
Canada Mexico Puerto Rico see USA
Brazil ERCO Iluminação LTDA Rua General Furtado Nascimento 740 Ed Bachianas 3º Andar SL 35 Barrio: Alto de Pinheiros CEP: 05465- 070 São Paulo Brazil Tel.: +55 11 7014 4518 info.br@erco.com
ERCO Lighting Pte. Ltd. Representative Office Suite 1, 114 Hardware Street Melbourne VIC 3000 Australia Tel.: +61 3 9914 2235 Fax: +61 3 9914 2238 info.au@erco.com
Bolivia Chile Colombia Ecuador Paraguay Peru Uruguay Venezuela see Argentina
ERCO Lighting Pte. Ltd. Representative Office Rm1605, Bldg 11, West Zone Jianwai SOHO, No. 39 East 3rd Ring Middle Road Chaoyang District Beijing 100022 P.R. China Tel.: +86 10 5869 3125 Fax: +86 10 5869 3127 info.cn@erco.com
Japan ERCO Lighting Ltd. Shibakoen ND Bldg. 2- 5- 10 Shiba Minato- ku Tokyo 105- 0014 Japan Tel.: +81 3 5418 8230 Fax: +81 3 5418 8238 info.jp@erco.com Korea ERCO Lighting Pte. Ltd Representative Office 5th fl, Woorim Bldg. 797- 24 Bangbae- dong, Seocho- gu Seoul 137- 830 Korea Tel.: +82 2 596 3366 Fax: +82 2 596 3354 info.kr@erco.com
New Zealand see Australia ERCO Head Office ERCO GmbH Postfach 2460 58505 Lüdenscheid Brockhauser Weg 80–82 58507 Lüdenscheid Germany Tel.: +49 2351 551 0 Fax: +49 2351 551 300 info@erco.com www.erco.com For our up- to- date address list, please visit www.erco.com
1076
ERCO Program 2012
www.erco.com
tune the light
E Art. No. 1028251000 English 01/2012