I
EXTERIOR MTR135 LIGHT MODULE
LED-TECHNOLOGY engineered by SELUX速
HIGH-EFFICIENCY LED AND HIT RETROFIT KITS
Light. Ideas. Systems.
MTR135HIT > RETROFIT LIGHT MODULE FOR STANDARD LUMINAIRES > > > > > >
ECONOMICAL ENERGY-EFFICIENT LONG SERVICE LIFE MTR135 PRECISION GLASS CYLINDER FOR HIGH VISUAL COMFORT SYMMETRICAL OR ASYMMETRICAL LIGHT DISTRIBUTION PLEASANT COLOUR TEMPERATURE
SELUX速 tried and tested MTR refractor technology has been further developed and the result is a new type of MTR135 prism refractor for replacement of mercury vapour discharge lamps with LED or HIT fittings. This retrofit light module allows simple and inexpensive upgrade of existing pole-mounted luminaires in your lighting system. MTR135LED and MTR135HIT are also available for new systems.
HIT
MTR135HIT Technical details: Symmetrical / asymmetrical light distribution: Max. total power consumption 45W* HIT service life: 12,000 h Colour temperature: 3000 / 4200 K Protection class: Class I / Class II optional Weight: 3.5 kg
* for 35 (39)W HIT-CE
I 02
HIT
SELUX速 MTR135 prism refractor technology is protected by patent.
MTR135LED > RETROFIT LIGHT MODULE FOR STANDARD LUMINAIRES > > > > > > > > >
ECONOMICAL ENERGY-EFFICIENT - CO2 REDUCTION EXTRA LONG SERVICE LIFE DUE TO SOPHISTICATED HEAT MANAGEMENT CONCEPT LOW MAINTENANCE COSTS CONTROLLABLE ELECTRONICS - DIMMABLE 1-10V INTERFACE HIGH ANTI-GLARE LED LIGHT WITH MTR135 PRECISION GLASS CYLINDER FOR OPTIMUM VISUAL COMFORT SYMMETRICAL OR ASYMMETRICAL LIGHT DISTRIBUTION PLEASANT COLOUR TEMPERATURE NO IR OR UV PROPORTION
MTR135LED Technical details: Symmetrical light distribution: Max. total power consumption 36 W* Asymmetrical light distribution: Max. total power consumption 34 W* LED service life: 50,000 h Colour temperature: 4000 K Dimmable electronic converter with 1-10V interface Protection class: Class I / Class II optional Weight: 5 kg * LEDs are subject to ongoing development. We therefore reserve the right to modify our products in accordance with the latest technological developments.
MTR* = Multiprisms for Total-Reflection.
I 03
MTR135 > ECONOMICAL AND SUSTAINABLE Upgrade your lighting system by replacing your mercury vapour lamps. By converting from HQL to LED or HIT-CE-lamps, you can make significant savings and improve your CO2-footprint too with the same luminous flux. At the same time, you will benefit from better lighting quality, high-efficiency light guidance and optimum anti-glare comfort. The MTR135LED is switchable and dimmable via a 1-10V interface integrated in the converter as standard. Depending on application and switching cycle, this will enable more than 75%* energy savings.
Comparison of HQL / HIT / LED:
80 W HQL
35 W HIT
34 W LED
50%
40%
34 W LED / HNS
34 W LED / DYN
25%*
<25%*
Energy in % 100%
CONSUMPTION kWh / year 356 3.560 8.900 17.800
Luminous spots 1 10 25 50
CO2 in kg / year 214 2.136 5.340 10.680
COMPARISON OF SAVINGS WHEN CONVERTING FROM 80 W HQL kWh / year - 176 - 1.760 - 4.400 - 8.800
CO2 in kg / year - 106 - 1.056 - 2.640 - 5.280
kWh / year 220 - 2.200 - 5.500 - 11.000
CO2 in kg / year - 132 - 1.320 - 3.300 - 6.600
kWh / year 271 - 2.710 - 6.775 - 13.550
CO2 in kg / year - 163 - 1.630 - 4.075 - 8.150
kWh / year > 271 > - 2.710 > - 6.775 > - 13.550
CO2 in kg / year > - 163 > - 1.630 > - 4.075 > - 8.150
4000 h / operating time â&#x20AC;˘ CO2 factor: 0.6
5 am - 7 am
3 am - 5 am
1 am - 3 am
10 pm - 1 am
7 pm - 10 pm
6 am - 7 am
7 pm - 9 pm
9 pm - 6 am
*Based on switching and control examples shown. Savings potential depending on chosen switching cycles and system configurations. Switchable and dimmable converter with 1-10V interface for intelligent energy saving: HNS: Phase-controlled half-night switching via LRE module (50%) SX..-...-...-.../HNS
100%
50% HNS: with control line
I 04
100%
100%
40%
10%
60%
DYN: without control line
100%
DYN: Programmable control module for 5 independent dimming values and 5 unique times Programmable by customer or at factory. SX..-...-...-.../DYN
MTR135 > MAXIMUM VISUAL COMFORT SELUX速 MTR135 prism refractor technology enables precision light guidance, directing light onto the area of usage, enabling uniform lighting of streets and squares while preventing unwanted light immissions. This results in a high level of lighting quality that makes a considerable contribution to street lighting safety.
Standard system without MTR135 with ellipsoid lamp technology (HQL)
Modernised system with asymmetrical* MTR135LED or MTR135HIT prism refractor technology
*For details of asymmetrical / symmetrical light distribution, see next double page.
I 05
DIRECTED LIGHT WITH OPTIMUM ANTI-GLARE Light is directed by a CAD-developed prism refractor in the form of a seamlessly manufactured precision glass cylinder. Interior cylinder lenses expand the luminous spot while exterior Fresnel prisms deflect light onto the usage plane. Direct light guarantees outstanding glare-free properties for the light body.
With SELUX® MTR technology, the light spot on the extra high-luminance HIT burner or LED is expanded using cylindrical half lenses for optimum anti-glare comfort.
MTR135LED
LED-TECHNOLOGY engineered by SELUX®
MTR135HIT
The combination of the patented SELUX® MTR135 precision glass cylinder and Miro®silver reflector ensure an optimum LED light yield. Light sources used enable a very high level of colour reproduction, producing a superlative light image.
I 06
SELUX® MTR135 prism refractor technology is protected by patent.
ASYMMETRICAL / SYMMETRICAL LIGHT DISTRIBUTION MTR135LED Asymmetrical light distribution Three high-performance LEDs are distributed around a trapezium-shaped aluminium core enabling the light to be channeled in the directions of primary use. Symmetrical light distribution Four high-performance LEDs are uniformly distributed around a quadratic-shaped aluminium core ensuring light is radiated homogenously on all sides.
MTR135LED
Asymmetrical light distribution
Symmetrical light distribution
MTR135HIT
Asymmetrical light distribution with attachable prisms
Symmetrical light distribution without attachable prisms
MTR135HIT Asymmetrical / Symmetrical light distribution Attachable prisms included in scope of supply enable virtually complete conversion of symmetrical light distribution to asymmetrical while at the same time ensuring the light is shielded on the building side.
I 07
SIMPLE CONVERSION The MTR135 prism refractor can be installed in existing light systems quickly and easily. Fitting the retrofit light module takes just a few minutes so your standard system can be replaced with the latest LED technology in no time at all.
HQL luminaire
> Replace light module
> LED light
...connect MTR135 with connector....
Insert retrofit light module, attach the diffuser and close the canopy.
HQL
Open the luminaire canopy and remove it with the diffuser then release the old insert...
Why not take a look for yourself. Go to www.selux.de/mtr to view a video showing how to replace the module.
I 08
LED LUMINAIRES AND RETROFIT LIGHT MODULES FOR SELUX速 STANDARD LUMINAIRES AT A GLANCE
LED luminaire asym.
LED luminaire sym.
MTR135LED asym.
MTR135LED sym.
MTR135HIT sym. / asym. including attachable prisms
Retrofit light module for standard luminaires
ALPHA
SX 440 61-2
SX 440 60-2
> SX 97-995-440-034
> SX 97-995-440-036
> SX 97-995-440-035
ALPHETTA
SX 430 41-2
SX 430 40-2
> SX 97-995-430-034
> SX 97-995-430-036
> SX 97-995-430-035
URBI 3 BASKET
SX 674 31-6
SX 674 30-6
> SX 97-995-674-034
> SX 97-995-674-036
> SX 97-995-674-035
CALICIO
SX 350 54-4
SX 350 55-4
CALICIO 600
SX 354 60-4
SX 354 70-4
EURO
SX 421 41-2
SX 421 40-2
> SX 97-995-421-034
> SX 97-995-421-036
> SX 97-995-421-035
FIORE
SX 353 97-4
SX 353 96-4
GAMMA
SX 450 61-2
SX 450 60-2
> SX 97-995-450-034
> SX 97-995-450-036
> SX 97-995-450-035
SPHERE 400
SX 138 61-2
SX 138 60-2
> SX 97-995-138-034
> SX 97-995-138-036
> SX 97-995-138-035
SPHERE 500
SX 150 51-2
SX 150 50-2
> SX 97-995-150-034
> SX 97-995-150-036
> SX 97-995-150-035
NOVELLUM
SX 515 41-7
SX 515 40-7
> SX 97-995-515-034
> SX 97-995-515-036
> SX 97-995-515-035
QUADRO 1
SX 762 61-7
SX 762 60-7
> SX 97-995-762-034
> SX 97-995-762-036
> SX 97-995-762-035
QUADRO 2
SX 761 61-7
SX 761 60-7
> SX 97-995-761-034
> SX 97-995-761-036
> SX 97-995-761-035
SATURN 1
SX 470 81-2
SX 470 80-2
> SX 97-995-470-034
> SX 97-995-470-036
> SX 97-995-470-035
SATURN 2
SX 480 81-2
SX 480 80-2
> SX 97-995-480-034
> SX 97-995-480-036
> SX 97-995-480-035
SATURN 3
SX 475 41-2
SX 475 40-2
> SX 97-995-475-034
> SX 97-995-475-036
> SX 97-995-475-035
SATURN 4
SX 485 41-2
SX 485 40-2
> SX 97-995-485-034
> SX 97-995-485-036
> SX 97-995-485-035
SATURN 5
SX 470 60-4
SX 470 70-4
With the MTR135LED you can add SX..-...-...-.../HNS to the order number for a half-night switch with or SX..-...-...-.../DYN for a control module.
Example order: SX 97-995-440-036/DYN
Conversion kit MTR135 SX 97-995
for ALPHA -440
LED with sym. light distribution -036
and programmable control module /DYN
I 09
SMALL INVESTMENT - NEW TECHNOLOGY Innovative LED-/HIT-MTR135 retrofit light modules allow you to upgrade existing SELUX® products to the latest technological standards. Future-proof light technology for increased economical and environmental savings while preserving the familiar appearance of your roads and squares.
HQL
MTR135HIT
MTR135LED
> > >
High-efficiency SELUX® retrofit light modules can also be used to upgrade standard luminaires of other manufacturers. We’ll be happy to advise you!
I 10
NEW LUMINAIRES > > > >
>
MTR135LED AS COMPLETE KIT
TRAFFIC-CALMED AREAS ACCESS ROADS AND COLLECTING ROADS PEDESTRIAN AREAS PUBLIC CARPARKS
CALICIO 600
SATURN 5
High Efficiency 4000K > MTR135LED symmetrical
CALICIO 600 SX 354 70-4
SATURN 5 SX 470 70-4
High Efficiency 4000K > MTR135LED asymmetrical
SX 354 60-4
SX 470 60-4
Wall-mounted luminaires on request Standard colour: mica-graphite [-4]
This and other new products can be found in our HIGHLIGHTS 2010 catalogue available for download from www.selux.com
I 11
SELUX® offers a comprehensive range of premium-quality interior and exterior luminaires. We support the creative design of living spaces and workspaces with innovative products.
Semperlux Aktiengesellschaft - Lichttechnische Werke Motzener Straße 34 D-12277 Berlin Tel.: +49.30.720 01-0 Fax: +49.30.720 01-100 Email: info@selux.com www.selux.com
Technical details subject to change • Version 10 | 2010 • EDV 479 124
In cooperation with: EUROPEAN UNION European Regional Development Fund Investment in your future