Quincy's Bat Wings MATERIALS • 2 or more sheets of 8.5" x 11" cardstock • Scissors or cutting tool • 6" x 3" rectangle of black poster board (or adjust size so the wings sit between your child’s shoulder blades) • Multipurpose glue • Hole punch • 24" elastic or twine, cut in half
PRINTING AND ASSEMBLY INSTRUCTIONS NOTE: Project assembly is intended for adults only.
1
Print artwork and template and set aside to dry completely.
2
Glue wing template pages together back to back with right side of the first page and left side of the second page lined up; set aside to dry.
3
Cut out a 6" x 3" rectangle from black poster board and Punch holes according to the template provided.
5
Cut wings out along yellow lines.
6
Glue each wing to the backside of the cardboard with the longer edge on top and the shorter edge pointing down.
MAKE 1
4
To create arm straps, hold cardboard horizontally and thread one length of elastic through top right hole and tie a knot to secure. Thread the same piece of elastic through the bottom right hole, securing with a knot to form a loop. Repeat on the left side.
SM
PLAYHOUSEDISNEY.COM/CELEBRATIONCENTER
©Disney ©BEC
MAKE 1
SM
PLAYHOUSEDISNEY.COM/CELEBRATIONCENTER
©Disney
PLAYHOUSEDISNEY.COM/CELEBRATIONCENTER
©Disney