Pr one 1707152 jjhd 2017 hdminicatalog

2017 MINI CATAedLtoOolG s to speed through

tive, commonly us Check inside for innova show on the road. e th t ge d an bs jo e ic those HD serv

MDHDM

LCR5047

LUGNUT CAP REMOVER PLIERS

HD MODULE

∤∤ Removes chrome-plated lugnuts

caps on many heavy-duty trucks

Extends the existing Maximus 2.0 or Maximus 2.0A coverage with heavy duty truck capabilities.

MST7069A

HEAVY-DUTY TRUCK BRAKE SPRING PLIERS ∤∤ Specially designed pliers for

servicing heavy-duty brakes

∤∤ Long 26¼" handles provide extra

leverage for the toughest jobs

∤∤ Large jaws designed to accommodate

the largest brake shoes

7077

∤∤ Communicates via

AXLE STUD CONE PLIERS

Bluetooth or hard wired to the vehicles ∤∤ Works on 12V and 24V systems ∤∤ Supports assorted special functions including: Cylinder Compression Test, Injector Cut Out Test, DPF Regeneration and more ∤∤ Works on multi brands including: Caterpillar, Cummins, Detroit, Freightliner, Fusco, Hino, International, Isuzu, Kenworth, Peterbilt, Sterling, Volvo and more ∤∤ Covers various systems including: Engine, Transmissions, ABS, Auxiliary and more

∤∤ Removes tapered cone from rear axle

studs on medium- and heavy-duty trucks

∤∤ Eliminates damage to

threaded portion of stud

AN5550

AXLE HUB BRIDGE NUT SOCKET ∤∤ Works on the GMT-900 platform and

TBS81

covers both 2 wheel and 4 wheel drive Cheyenne, Silverado, Escalade, Sierra and Avalanche trucks ∤∤ Has 9 drive pins which will allow the specified torque to be reached to set proper preload on the bearing ∤∤ 1/2" drive

HEAVY-DUTY TRUCK BRAKE SPRING REMOVER ∤∤ Simplifies brake shoe replacement

on tractor and trailer S-cam brakes

∤∤ Eliminates need for grip wrenches,

pry bars and screwdrivers

∤∤ Easily removes and installs

both inner and outer "Q" brake shoe retaining springs

MST3499

HEAVY-DUTY BRAKE SPRING TOOL ∤∤ Provides easy access to brake

springs when blocked by the emergency brake lever ∤∤ 1967-1997 Ford F250, F350, E200, E250, E350 ∤∤ 1988-1997 Ford F450 Super Duty ∤∤ 1970-1993 Dodge B300, B350 ∤∤ 1974-1984 Dodge 400 & 450 Series ∤∤ 1975-1993 Dodge W300, W350 ∤∤ 1981-1993 Dodge D300, D350

2

SEP76V EATBST

EATON TRUCK BRAKE SPRING TOOL ∤∤ Easily installs Eaton air

brake shoe anchor springs ∤∤ Universal fit for all Eaton air brake shoe anchor springs

1" DRIVE ADV 7 PIECE SAE 6 POINT WHEEL SERVICE SOCKET SET ∤∤ Opti-Torque system applies torque to the

fastener sides reducing corner round off

∤∤ High visibility size markings quickly identify

socket, even in poorly lit work areas

∤∤ Cold-formed from high performance alloy steel

for the ultimate in strength and durability

∤∤ Precision engineered for performance that won't let you

down with dependability and consistent product performance

∤∤ Parallel nose down design allows for use in tight areas ∤∤ 1" drive 13/16", 13⁄16", 11⁄16", 11⁄8", 11⁄4", 33mm, 11⁄2"

See your Matco Distributor for more details on products and ways to save.

BRING ON THE

BIG

1/2" X 50'

GUNS!

HFZ1250YW3

FLEXZILLA AIR HOSE

MT2234

∤∤ Extreme all-weather flexibility (-40° to 140°F) ∤∤ Lightweight and easy to handle ∤∤ Won't kink under pressure ∤∤ Lays flat – no memory ∤∤ Durable and abrasion-resistant outer cover ∤∤ Reinforced bend restrictors ∤∤ Anodized aircraft aluminum ends

3/4" IMPACT WRENCH ∤∤ 1,800 ft. lbs. of breakaway torque, 1,200

ft. lbs. of maximum working torque

∤∤ Variable speed control with 3 stage

power regulator dial behind trigger

∤∤ One hand forward/reverse

lever accommodates both left and right handed users ∤∤ Lightweight at only 6.8 lbs ∤∤ Quiet at 97 dBA ∤∤ 2 year warranty

1,800 FT. LBS. BREAKAWAY TORQUE

2,000 DP2416RB

EP3224RB

3/4" DRIVE X 1/2" DRIVE IMPACT REDUCING ADAPTER

1" DRIVE TO 3/4" MALE DRIVE IMPACT ADAPTER

∤∤ Clearly marked for

ease of identification

∤∤ Knurled design allows

for hand tightening when access is difficult

FT. LBS. MAX TORQUE

∤∤ Clearly marked for

ease of identification

∤∤ Knurled design allows

for hand tightening when access is difficult

2,700 MT3100

SDDP296V

3/4" DRIVE ADV 29 PIECE SAE 6 POINT DEEP IMPACT SOCKET SET ∤∤ Opti-Torque system applies torque to the fastener sides, reducing corner round off ∤∤ 150° chamfer on the socket drive end for better grab, constant pressure, and easier use ∤∤ High visibility size markings quickly identify socket, even in poorly lit work areas ∤∤ Cold-formed from high performance alloy steel for

the ultimate in strength and durability

∤∤ Precision engineered for performance that won't let you down

with dependability and consistent product performance

∤∤ Parallel nose down design allows for use in tight areas ∤∤ Sizes include: 3/4" - 21⁄2"

Join us on:

FT. LBS. BREAKAWAY TORQUE

1" COMPOSITE IMPACT WRENCH ∤∤ 2,000 ft. lbs. of maximum torque ∤∤ Extended anvil reaches into wheels

without the need for extra attachments

∤∤ Side mounted handle increases

user control and reduces fatigue ∤∤ Durable composite hosing withstands tough environments ∤∤ Chainsaw style trigger improves ergonomics ∤∤ Oversize rear mounted directional switch allows for quick changes even with gloves ∤∤ 4 position regulator knob allows for greater control

SE116

SILVER EAGLE 1" DRIVE IMPACT WRENCH ∤∤ Powerful rocking dog clutch

provides 1,600 ft. lbs. of working torque; 2,700 ft. lbs. of breakaway torque ∤∤ D-shaped side handle included ∤∤ Comfortable chainsaw style trigger handle ∤∤ Durable aluminum housing with matte black finish

www.matcotools.com

3

FUEL LINE

PM8090B - BRASS PM8090S - STAINLESS

DISCONNECT

17 PIECE BRASS DIESEL INJECTOR SEAT CLEANING KITS

∤∤ Two piece design allows easy

access for Cummins fuel lines ∤∤ Straight and 90° forks allow access to wide range of connectors found on the motor ∤∤ Made from precision laser cut steel for long long life

∤∤ Cleans diesel injector seats and bores on most

light, medium and heavy-duty diesel motors

∤∤ Two-stage brush design is engineered

to fit injector seats

FLD1325

∤∤ Removes rust, carbon and other debris

3/8" FOR VOSS

∤∤ Driver handle features a spring-

from seats and cups without damage loaded quick-lock coupler

∤∤ Includes SWAB-EEZ for cleaning and

polishing injector bore and cup

FLD1327

1/2" FOR VOSS FLD1326

FOR CUMMINS

DFF36

DUAL FORD FUEL FILTER SOCKET ∤∤ 36mm hex combined with 6 notches

allow this tool to do the work of two

∤∤ Works on fuel filters for Ford F250 - F550

Trucks, E250 - E350 Econoline Vans, Excursion and Super Duty; 1998-present Ford 7.3L Power Stroke diesel and oil filter caps for 2003-2007 Ford 6.0L Power Stroke diesel, 2008-present Ford 6.4L Turbo diesel ∤∤ Red anodizing for easy visual identification ∤∤ 3/8" drive

MST6765

FORD 6.0L INJECTOR PRESSURE REGULATOR SOCKET ∤∤ The configuration for the IPR

changed in 2005 and a second tool was developed for it, so we developed one tool that can address either version of the IPR - giving you a single tool for both applications ∤∤ Convenient 3/8" square drive for use with multiple drive tools ∤∤ Forged of high quality tool steel and heat treated for maximum service life

OIL FILTER WRENCHES ∤∤ Tough, stainless steel band with permanently

bonded textured coating for superior gripping power that won't slip ∤∤ "Swivel Grip" handle makes it easy to turn in tight spots ∤∤ Handle is made of tubular steel for added strength and comes with a non-slip, double dip drip

OF50 - FOR CUMMINS AND DETROIT DIESEL ENGINES

IPR68

IPR SOCKET

MST1140

∤∤ Works on Cummins and Detroit Diesel

∤∤ Used to remove and replace

the Injector Pressure Regulator (IPR) on Ford 6.0L and other diesel engines ∤∤ Tool is built to bottom out on the hex so it does not put torque on the connector in case it can be reused ∤∤ Use with 3/8" square drive

4

SWIVEL GRIP

engines with a range of 4 5⁄16" to 4 3⁄4"

FORD 6.7L DIESEL INJECTOR SOCKETS

OF60 - FOR JOHN DEERE

∤∤ 17mm 12 point flare nut socket and deep crows foot

∤∤ Fits most John Deere tractors and also works on some

gives you the ability to remove various injector lines

∤∤ Injectors can be removed without breaking

Case, Case/IHC, Allis Chalmers tractors and other farm implement products with a range 4 3⁄4" to 5 3⁄16"

and damaging the electrical connections

∤∤ The long socket has the clearance required and

linear shape to properly torque the fuel lines

OF70 - FOR CATERPILLAR ENGINES ∤∤ Works on Caterpillar engines and has a range of 5 ⁄4" to 5 ⁄4" 1

3

∤∤ Crows foot designed to spin under the

bent lines for quick operation

See your Matco Distributor for more details on products and ways to save.

FSS5

5 PIECE 6 POINT OIL FILTER SOCKET SET ∤∤ For use on oil and fuel filter canisters

when replacing the element

∤∤ Use with 3/8" drive ∤∤ The 2009 and up Chevy Aveo,

Pontiac G3 and 2011 and up Chevy Cruze with 1.4L, 1.6L, 1.8L motors use the 24mm socket ∤∤ Set includes: 24mm, 27mm, 29mm, 32mm and 35/36mm sockets

MST6760A

FORD FUEL FILTER SOCKET ∤∤ Keeps contact on multiple areas to provide

strength for tough removal with a low profile tool for accessing tight spaces ∤∤ Works on Ford Power Stroke and Navistar diesel engines ∤∤ Works with 3/8" drive

5 PIECE

HOSE PICK REMOVER

SET

HPR5S ∤∤ Contains long and

DFH221

DURAMAX FLYWHEEL HOLDER AND SOCKET ∤∤ Locks flywheel in place when removing harmonic

balancer on 6.6L Duramax engines with Allison automatic transmissions ∤∤ Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement ∤∤ Use 36mm 12-point socket with 3/4" square drive to remove harmonic balancer bolt and retorque on installation

short, standard and offset hooks ∤∤ Can be used to remove hoses, moldings, clips, clamps, seals, O-rings, cotter pins, gaskets, etc ∤∤ Long pullers are 13" long ∤∤ Handles are dual durometer material for comfort and grip ∤∤ Rods are heat-treated for strength and plated for durability

TS405

TIRE STEP

∤∤ Hangs over front or rear wheel for easy access ∤∤ Fits tires up to 141⁄2" wide ∤∤ 211⁄4" wide

TA19852

TRUCK AXLE OIL DRAIN PAN

∤∤ Catches oil from wheel hubs after removing cap ∤∤ Handle compartments keep hub nuts out of the oil ∤∤ Made of polypropylene for durability and will not warp if oil is warm ∤∤ Fits rims with 13¾" I.D. and larger and capacity of 88 oz. (2.75 quarts)

Join us on:

www.matcotools.com

5

TRUCK BALL JOINT MASTER KIT MST6539 ∤∤ Kit for domestic

and import pressin ball joints on the following truck/ van/SUV makes: ∤∤ Toyota, Hyundai, KIA, Infinity, Isuzu, Nissan, Chrysler, Dodge, Jeep, Plymouth, Mitsubishi, Ford, Lincoln, Mercury, Mazda, Chevrolet, GMC and Hummer

MST6766

TERMINAL RELEASE TOOL FORD 6.0L ENGINES ∤∤ Over 7" long with a comfortable grip ∤∤ Used on Ford 6.0 liter engines ∤∤ Allows for the removal of the vehicle's

injector wiring harness while preventing any potential damage to the harness itself

MST5190B

HEAVY-DUTY U-JOINT PULLER ∤∤ Provides the strength to disassemble even the toughest U-joints

in minutes on virtually all Class 7 and 8 trucks and machinery

∤∤ For use with up to 1" Impact Tool or Air Tool ∤∤ Will not damage the driveshaft, bearings, yokes or bearing cups ∤∤ Works on Meritor (Rockwell) 16N,17N,18N,1710 Series; Meritor RPL 20,

25; Permalube Spicer 1610,1710,1760,1810,1880; Spicer SPL 140,170,250; Life Series and almost all U-Joints with bearing cups 1.5 to 2.2 O.D

OTC7223

DURAMAX GLOW PLUG BORE REAMER ∤∤ Reams glow plug bores for proper

replacement of glow plugs

∤∤ Fits GM 6.6L Duramax diesel 2001 to present

WT600

DEUTSCH TERMINAL TOOL ∤∤ OEM electrical connectors work on trucks and

equipment such as Caterpillar, Kenworth, Peterbuilt, Freightliner, Mack and Harley-Davidson motorcycles ∤∤ Features three sizes of slotted tubes (14, 16 and 20 gauge) for working on different sizes of Deutsch terminals

BRS5HD

BRS8HD

5 PIECE HEAVY-DUTY SEAL DRIVER SET

HEAVY-DUTY BEARING AND SEAL DRIVER KIT

8 and class 7 over the road trucks and trailers and some medium duty trucks ∤∤ Designed to fit the rubber part of the seals to make easier to install ∤∤ Includes five drivers and the handle extension for driving the seals into the hubs with deep brake drums without removing the drums ∤∤ Each driver is marked with the size and seal number for convenience to cross reference the numbers

over the road trucks and trailers ∤∤ Use the tapered driver side for bearing races; reverse to the flat side for seals ∤∤ Set includes 6 sizes and two handles that you can screw together for extra length and a flanged nut to hold the adapters onto the handle ∤∤ Bearing race size: 3 43⁄64" O.D., 413⁄16" O.D., 47⁄8" O.D., 525⁄32" O.D., 51⁄2" O.D. and 6" O.D

∤∤ Fits the most popular sizes for class

6

∤∤ Heavy-duty truck set fits most class 8

MST6768

FORD 6.0L GLOW PLUG TOOL ∤∤ Unique tool design quickly removes glow plugs

from 2004 and new Ford 6.0 L engines

∤∤ Similar to Ford Rotunda # 303-1114

See your Matco Distributor for more details on products and ways to save.

MST5025

DEISEL EXHAUST FLUID REFRACTOMETER SCR AND EPA 2010 ∤∤ EPA regulations require all diesel engines

manufactured on or after January 1, 2010 to meet lowered NOX emissions standards ∤∤ Most heavy-duty engine (Class 7-8 trucks) manufacturers have chosen to utilize SCR which includes Detroit Diesel (DD13, DD15 and DD16 models), Cummins (ISX line), PACCAR and Volvo/Mack ∤∤ SCR-equipped engines require the periodic addition of Diesel Exhaust Fluid (DEF, a urea solution) to enable the process ∤∤ Portable precision optical instrument used for measuring the diesel exhaust fluid concentration

Easily and accurately monitor condition of Diesel Exhaust Fluid for peak engine performance.

MST9565A

ALD425

CUMMINS ENGINE ROTATING TOOL

AIRLINE DISCONNECT SET OF 5

∤∤ 3/8" drive barring tool is used when making

∤∤ Disconnects Quick Connect push-

valve adjustments on pump settings made with a two piece sleeve ∤∤ Two piece sleeve allows proper contact with the flywheel when the flywheel is at different depths from the hole where the tool is inserted ∤∤ Most of the popular Dodge diesel pickup trucks require the use of this tool

in connectors found on heavyduty truck air systems ∤∤ Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment ∤∤ Works on 5/8", 1/2", 3/8", 1/4", 5/32" and 1/8" lines

TPT900

9 PIECE TURBO PRESSURE TESTER KIT

∤∤ Designed to put pressure on the turbo and inlet system with compressed air so any leakage will be located easily and quickly ∤∤ Works on most light duty pickups and Heavy Duty Class 7 & 8 trucks with turbos ∤∤ 8 pairs of adapters ranging from 75mm to 110mm and a gauge with quick release valve ∤∤ Each adaptor is lipped to allow for better grip within the turbo hose end

DRF152

DIESEL DEF TUBE RELEASE FORKS ∤∤ Allows easy access

to hard to reach DEF line connectors ∤∤ Two sided design allows for straight and 90° access ∤∤ Three different sizes ∤∤ Made out of 1/4" precision laser cut steel

Join us on:

FTAP1225

FORD 6.4L DIESEL TURBO ARM PULLER

∤∤ Removes the turbo

actuator arm on 20082010 Power Stroke ∤∤ Compact size fits on or off of the truck ∤∤ Self-aligning for easy install ∤∤ Fine thread actuator to reduce torque required to loosen press fit

RC50T

TRUCK PISTON RING COMPRESSORS 31⁄2" - 7" ∤∤ Covers truck sizes 31⁄2" - 7" ∤∤ Handle is 1/4" square stock ∤∤ High-carbon blue steel compression

band with a beaded edge prevents ring compressor from entering cylinder ∤∤ Takes all rings at once ∤∤ Double friction brake adjustment in addition to ratcheting pawl firmly holds rings in grooves for smooth insertion

www.matcotools.com

7

COOLING SYSTEM

AIR PURGE Eliminates airlocks that can occur while servicing some of todays cooling systems where the radiator is positioned low relative to the engine.

2

BATTERIES INCLUDED

20V

1,500 FT. LBS. BREAKAWAY TORQUE

AC550000

AIRLIFT COOLING SYSTEM AIR PURGE ∤∤ Simply connect your shop air to the Airlift and pull vacuum ∤∤ Check for leaks and then refill in seconds

COOLING SYSTEM ADAPTER SETS

3/4" MCL2034HPIWK

3/4" DRIVE HIGH PERFORMANCE IMPACT WRENCH ∤∤ Powerful 4 pole motor generates

1,500 ft. lbs. of breakaway torque

∤∤ Variable speed trigger for

MPT4001

6 PIECE FOR LARGE TRUCKS ∤∤ Compatible with cooling system pressure

tester kits (RPT101, RPT102 and RPT103) and vacuum assist refillers ∤∤ Contains six cooling system adapters to attach to the most commonly found large truck cooling system filler necks ∤∤ Adapters included: MPT0010, TA50, MPT10027P, MPT10036P, MPT10054P and A4505B

∤∤ Trigger activated dual LED light

8 PIECE TRUCK ADAPTER SET

∤∤ Balanced housing design with

∤∤ Compatible with most cooling system

pressure testers and refillers ∤∤ Allows the testing of most large trucks because it contains the 8 most common truck adapters ∤∤ Composite cap adapters are shaped like the caps from the system they test and are made with the same material as a cap ∤∤ Includes adapter application guide and a laminated mat for easier adapter selection

The products on Matco’s National Promo are limited in quantity and subject to availability. Prices in Puerto Rico, Alaska and Hawaii may vary due to additional shipping charges. Matco reserves the right to correct printing errors. ©2017 Matco

JJHD-2017

ultimate control

MPT8001

Tools. 1707152 All Rights Reserved Matco Tools® and their respective logos are trademarks or registered trademarks of Matco Tools in the United States and in other countries.

for work in poorly lit areas

positive touch TPR handle makes this tool easy to work with for extended periods of time ∤∤ Stainless steel screened motor vents to extend motor life ∤∤ Forward / reverse trigger lock ∤∤ Provision for optional side handle ∤∤ Battery fuel gauge indicator ∤∤ 5.5Ah universal charger with USB port that is capable of charging a 4.0Ah battery in less than 60 minutes; will charge Infinium batteries from 10.8V through 20V