Efco - Multifunction brushcutter DS 2400 D

compact, lightweight

and “no-tool” POWER UNIT PERFORMANCE

NEW MULTIFUNCTION BRUSHCUTTER › 21.7 cm³ 1.2 HP (0.9 kW) 2-stroke engine: featuring generous torque output with a linear power curve even at low revs.

NEW MULTIFUNCTION BRUSHCUTTER

DS 2400 D

DS 2400 D

› Piston with 2 rings, diecast cylinder with nickel plating, forged con rod and crankshaft: guarantee of ruggedness and durability.

21.7 cm³ 1.2 HP (0.9 kW) 2-stroke engine: featuring generous torque output with a linear power curve even at low revs. Ecologically advanced (Euro 2), low noise, lightweight and with minimal fuel consumption.

› Digital coil with electronic control and revs limiter: for easier starting, enhanced performance thanks to uniform combustion, and reduced fuel consumption. › Innovative 110 mm dia. Load&Go head with 2.4 mm dia. line: for straightforward and fast line replacement, just 20 seconds to rewind the line and resume work.

ERGONOMICS

› Machine equipped with “no tools” quick fit system: a device designed to enable installation of 4 different applications without the use of tools.

The compact dimensions of the engine unit and balanced weight distribution of the tool assure a good level of manoeuvrability and control in all working conditions and in all applications.

› 24 mm diameter aluminium drive tube with self-lubricating bearings to ensure smooth movement of the shaft for greater operator comfort. Aluminium bevel drive with M10 pivot designed to transfer the engine power to the cutting tool in an optimal manner.

VERSATILE

The “Easy on” device assures reduced rope pulling force and fast starting with fewer rope pulls.

The no-tools quick attachment system makes it possible to switch between applications rapidly and with just a few actions, while also reducing space requirements for transportation and storage.

Compact, lightweight and low noise engine able to power different applications (pruner, blower and hedgetrimmer). Fitting the 0.75 metre extension shaft makes it possible to increase the length of the drive tube in order to reach taller hedges and branches (recommended for the pruner and hedgetrimmer applications).

› On/off switch: returns automatically to the “on” position after each stop (always on). › Filter support with carburettor anti-backflow element (Emak patent): prevents the filter from becoming fouled by fuel and guarantees longer operation between filter maintenance operations. › “Easy on” device: composed of a double spring in the starter cover combined with driver with two ratchets means reduced force with each pull and fast starting with fewer rope pulls.

3085431

EASE OF USE

It’s an Emak S.p.A. trademark 42011 Bagnolo in Piano (RE) Italy Tel. +39 0522 956611 • Fax +39 0522 951555 info@myefco.com • www.myefco.com

www.youtube.com/MyEfco

NEW MULTIFUNCTION BRUSHCUTTER

DS 2400 D

The new DS 2400 D brushcutter is designed to meet the needs of DIY users for private gardens and professionals responsible for maintenance of green spaces around condominiums, residential complexes and resorts. Both user groups can benefit enormously from a multipurpose tool that can be quickly set up as a brushcutter, hedgetrimmer, pruner or leaf blower.

The same compact and light weight engine unit together with a notools coupling system for mounting the various attachments, makes this tool easy to use in all seasons: cutting the grass and trimming hedges in spring or pruning duties and leaf blowing during the autumn months.

Each application – with the exception of the brushcutter, which is supplied as standard with the engine unit – is managed separately and can be purchased after purchasing the basic tool as the need arises. Users can also order an extension that increases the length of the drive tube to allow the tool to reach higher hedges or loftier branches: this makes it possible to dispense with the need for impractical ladders or access platforms.

Using just one motor for all applications means simplified maintenance and refueling of just one tank, while simultaneously reducing the space required for transport or winter storage.

FOR POWER ACCESSORY RECOMMENDED R APPLICATIONS PRUNER AND HEDGETRIMME

Shaft extension Fitting the 0.75 metre shaft makes it possible to increase the length of the drive tube in order to reach taller hedges and branches. Recommended for pruner and hedgetrimmer application. Weight: 0.7 Kg - Length: 750 mm

brushcutter

Hedgetrimmer

PRUNER

Practical and manoeuvrable thanks to an optimal ratio between weight and balance; 12 adjustment positions make it possible to change the angle of the blades to adapt them to match your needs. The 0.9 metre shaft enables the operator to trim hedges up to 3 metres high.

Power/Displacement Shaft arm diameter Handle Cutting components Clutch Fuel tank capacity Weight

1.2 HP - 0.9 kW / 21.7 cm³ 24 mm single 110 mm dia. Load&Go line head with 2.40 mm dia. line 255 mm dia. disc with 3 blades 54 mm 0.40 L 5.1 Kg

Blade length Blades Blade pitch Weight of application/complete tool

500 mm adjustable through 12 positions from 0 to 180° 35 mm 2.5 Kg / 6.5 Kg

Blower

Versatile application that makes it possible to prune branches and bushes of all types of up to 3 metres in height, ensuring healthy growth and vegetation. The pruner can be adjusted through 5 intermediate positions from 0° a 90° to allow a better view of the cutting area.

Weight of complete machine Bar length Chain (pitch x gauge) Oil tank capacity Weight of application/complete tool

2000 mm 25 cm/10” 3/8” x .043” 0.18 L 2.0 Kg / 6.0 Kg

After cutting the grass, trimming the hedge and pruning the trees, the no tools quick fit system makes it possible to install the blower application: the ideal tool to remove leaves, bush and debris from the garden.

Air flow rate Air velocity Weight of application/complete tool

600 m³/h 60 m/s 1.5 Kg / 5.5 Kg

NEW MULTIFUNCTION BRUSHCUTTER

DS 2400 D

The new DS 2400 D brushcutter is designed to meet the needs of DIY users for private gardens and professionals responsible for maintenance of green spaces around condominiums, residential complexes and resorts. Both user groups can benefit enormously from a multipurpose tool that can be quickly set up as a brushcutter, hedgetrimmer, pruner or leaf blower.

The same compact and light weight engine unit together with a notools coupling system for mounting the various attachments, makes this tool easy to use in all seasons: cutting the grass and trimming hedges in spring or pruning duties and leaf blowing during the autumn months.

Each application – with the exception of the brushcutter, which is supplied as standard with the engine unit – is managed separately and can be purchased after purchasing the basic tool as the need arises. Users can also order an extension that increases the length of the drive tube to allow the tool to reach higher hedges or loftier branches: this makes it possible to dispense with the need for impractical ladders or access platforms.

Using just one motor for all applications means simplified maintenance and refueling of just one tank, while simultaneously reducing the space required for transport or winter storage.

FOR POWER ACCESSORY RECOMMENDED R APPLICATIONS PRUNER AND HEDGETRIMME

Shaft extension Fitting the 0.75 metre shaft makes it possible to increase the length of the drive tube in order to reach taller hedges and branches. Recommended for pruner and hedgetrimmer application. Weight: 0.7 Kg - Length: 750 mm

brushcutter

Hedgetrimmer

PRUNER

Practical and manoeuvrable thanks to an optimal ratio between weight and balance; 12 adjustment positions make it possible to change the angle of the blades to adapt them to match your needs. The 0.9 metre shaft enables the operator to trim hedges up to 3 metres high.

Power/Displacement Shaft arm diameter Handle Cutting components Clutch Fuel tank capacity Weight

1.2 HP - 0.9 kW / 21.7 cm³ 24 mm single 110 mm dia. Load&Go line head with 2.40 mm dia. line 255 mm dia. disc with 3 blades 54 mm 0.40 L 5.1 Kg

Blade length Blades Blade pitch Weight of application/complete tool

500 mm adjustable through 12 positions from 0 to 180° 35 mm 2.5 Kg / 6.5 Kg

Blower

Versatile application that makes it possible to prune branches and bushes of all types of up to 3 metres in height, ensuring healthy growth and vegetation. The pruner can be adjusted through 5 intermediate positions from 0° a 90° to allow a better view of the cutting area.

Weight of complete machine Bar length Chain (pitch x gauge) Oil tank capacity Weight of application/complete tool

2000 mm 25 cm/10” 3/8” x .043” 0.18 L 2.0 Kg / 6.0 Kg

After cutting the grass, trimming the hedge and pruning the trees, the no tools quick fit system makes it possible to install the blower application: the ideal tool to remove leaves, bush and debris from the garden.

Air flow rate Air velocity Weight of application/complete tool

600 m³/h 60 m/s 1.5 Kg / 5.5 Kg

NEW MULTIFUNCTION BRUSHCUTTER

DS 2400 D

The new DS 2400 D brushcutter is designed to meet the needs of DIY users for private gardens and professionals responsible for maintenance of green spaces around condominiums, residential complexes and resorts. Both user groups can benefit enormously from a multipurpose tool that can be quickly set up as a brushcutter, hedgetrimmer, pruner or leaf blower.

The same compact and light weight engine unit together with a notools coupling system for mounting the various attachments, makes this tool easy to use in all seasons: cutting the grass and trimming hedges in spring or pruning duties and leaf blowing during the autumn months.

Each application – with the exception of the brushcutter, which is supplied as standard with the engine unit – is managed separately and can be purchased after purchasing the basic tool as the need arises. Users can also order an extension that increases the length of the drive tube to allow the tool to reach higher hedges or loftier branches: this makes it possible to dispense with the need for impractical ladders or access platforms.

Using just one motor for all applications means simplified maintenance and refueling of just one tank, while simultaneously reducing the space required for transport or winter storage.

FOR POWER ACCESSORY RECOMMENDED R APPLICATIONS PRUNER AND HEDGETRIMME

Shaft extension Fitting the 0.75 metre shaft makes it possible to increase the length of the drive tube in order to reach taller hedges and branches. Recommended for pruner and hedgetrimmer application. Weight: 0.7 Kg - Length: 750 mm

brushcutter

Hedgetrimmer

PRUNER

Practical and manoeuvrable thanks to an optimal ratio between weight and balance; 12 adjustment positions make it possible to change the angle of the blades to adapt them to match your needs. The 0.9 metre shaft enables the operator to trim hedges up to 3 metres high.

Power/Displacement Shaft arm diameter Handle Cutting components Clutch Fuel tank capacity Weight

1.2 HP - 0.9 kW / 21.7 cm³ 24 mm single 110 mm dia. Load&Go line head with 2.40 mm dia. line 255 mm dia. disc with 3 blades 54 mm 0.40 L 5.1 Kg

Blade length Blades Blade pitch Weight of application/complete tool

500 mm adjustable through 12 positions from 0 to 180° 35 mm 2.5 Kg / 6.5 Kg

Blower

Versatile application that makes it possible to prune branches and bushes of all types of up to 3 metres in height, ensuring healthy growth and vegetation. The pruner can be adjusted through 5 intermediate positions from 0° a 90° to allow a better view of the cutting area.

Weight of complete machine Bar length Chain (pitch x gauge) Oil tank capacity Weight of application/complete tool

2000 mm 25 cm/10” 3/8” x .043” 0.18 L 2.0 Kg / 6.0 Kg

After cutting the grass, trimming the hedge and pruning the trees, the no tools quick fit system makes it possible to install the blower application: the ideal tool to remove leaves, bush and debris from the garden.

Air flow rate Air velocity Weight of application/complete tool

600 m³/h 60 m/s 1.5 Kg / 5.5 Kg

compact, lightweight

and “no-tool” POWER UNIT PERFORMANCE

NEW MULTIFUNCTION BRUSHCUTTER › 21.7 cm³ 1.2 HP (0.9 kW) 2-stroke engine: featuring generous torque output with a linear power curve even at low revs.

NEW MULTIFUNCTION BRUSHCUTTER

DS 2400 D

DS 2400 D

› Piston with 2 rings, diecast cylinder with nickel plating, forged con rod and crankshaft: guarantee of ruggedness and durability.

21.7 cm³ 1.2 HP (0.9 kW) 2-stroke engine: featuring generous torque output with a linear power curve even at low revs. Ecologically advanced (Euro 2), low noise, lightweight and with minimal fuel consumption.

› Digital coil with electronic control and revs limiter: for easier starting, enhanced performance thanks to uniform combustion, and reduced fuel consumption. › Innovative 110 mm dia. Load&Go head with 2.4 mm dia. line: for straightforward and fast line replacement, just 20 seconds to rewind the line and resume work.

ERGONOMICS

› Machine equipped with “no tools” quick fit system: a device designed to enable installation of 4 different applications without the use of tools.

The compact dimensions of the engine unit and balanced weight distribution of the tool assure a good level of manoeuvrability and control in all working conditions and in all applications.

› 24 mm diameter aluminium drive tube with self-lubricating bearings to ensure smooth movement of the shaft for greater operator comfort. Aluminium bevel drive with M10 pivot designed to transfer the engine power to the cutting tool in an optimal manner.

VERSATILE

The “Easy on” device assures reduced rope pulling force and fast starting with fewer rope pulls.

The no-tools quick attachment system makes it possible to switch between applications rapidly and with just a few actions, while also reducing space requirements for transportation and storage.

Compact, lightweight and low noise engine able to power different applications (pruner, blower and hedgetrimmer). Fitting the 0.75 metre extension shaft makes it possible to increase the length of the drive tube in order to reach taller hedges and branches (recommended for the pruner and hedgetrimmer applications).

› On/off switch: returns automatically to the “on” position after each stop (always on). › Filter support with carburettor anti-backflow element (Emak patent): prevents the filter from becoming fouled by fuel and guarantees longer operation between filter maintenance operations. › “Easy on” device: composed of a double spring in the starter cover combined with driver with two ratchets means reduced force with each pull and fast starting with fewer rope pulls.

3085431

EASE OF USE

It’s an Emak S.p.A. trademark 42011 Bagnolo in Piano (RE) Italy Tel. +39 0522 956611 • Fax +39 0522 951555 info@myefco.com • www.myefco.com

www.youtube.com/MyEfco

compact, lightweight

and “no-tool” POWER UNIT PERFORMANCE

NEW MULTIFUNCTION BRUSHCUTTER › 21.7 cm³ 1.2 HP (0.9 kW) 2-stroke engine: featuring generous torque output with a linear power curve even at low revs.

NEW MULTIFUNCTION BRUSHCUTTER

DS 2400 D

DS 2400 D

› Piston with 2 rings, diecast cylinder with nickel plating, forged con rod and crankshaft: guarantee of ruggedness and durability.

21.7 cm³ 1.2 HP (0.9 kW) 2-stroke engine: featuring generous torque output with a linear power curve even at low revs. Ecologically advanced (Euro 2), low noise, lightweight and with minimal fuel consumption.

› Digital coil with electronic control and revs limiter: for easier starting, enhanced performance thanks to uniform combustion, and reduced fuel consumption. › Innovative 110 mm dia. Load&Go head with 2.4 mm dia. line: for straightforward and fast line replacement, just 20 seconds to rewind the line and resume work.

ERGONOMICS

› Machine equipped with “no tools” quick fit system: a device designed to enable installation of 4 different applications without the use of tools.

The compact dimensions of the engine unit and balanced weight distribution of the tool assure a good level of manoeuvrability and control in all working conditions and in all applications.

› 24 mm diameter aluminium drive tube with self-lubricating bearings to ensure smooth movement of the shaft for greater operator comfort. Aluminium bevel drive with M10 pivot designed to transfer the engine power to the cutting tool in an optimal manner.

VERSATILE

The “Easy on” device assures reduced rope pulling force and fast starting with fewer rope pulls.

The no-tools quick attachment system makes it possible to switch between applications rapidly and with just a few actions, while also reducing space requirements for transportation and storage.

Compact, lightweight and low noise engine able to power different applications (pruner, blower and hedgetrimmer). Fitting the 0.75 metre extension shaft makes it possible to increase the length of the drive tube in order to reach taller hedges and branches (recommended for the pruner and hedgetrimmer applications).

› On/off switch: returns automatically to the “on” position after each stop (always on). › Filter support with carburettor anti-backflow element (Emak patent): prevents the filter from becoming fouled by fuel and guarantees longer operation between filter maintenance operations. › “Easy on” device: composed of a double spring in the starter cover combined with driver with two ratchets means reduced force with each pull and fast starting with fewer rope pulls.

3085431

EASE OF USE

It’s an Emak S.p.A. trademark 42011 Bagnolo in Piano (RE) Italy Tel. +39 0522 956611 • Fax +39 0522 951555 info@myefco.com • www.myefco.com

www.youtube.com/MyEfco