NEW BRUSHCUTTERS
BC 270 - BC 300
NEW BRUSHCUTTERS
BC 270 - BC 300 Oleo-Mac presents the new BC 270 and BC 300 universal brushcutters for intensive home use, designed for tidying up gardens and flower beds, and clearing overgrown areas of medium size: a clear response for demanding users seeking high performance and the maximum operator comfort. Exploiting the technology of professional machines, these brushcutters advantageously combine an unfailingly high and steady work rate with simplicity of use and exceptional operating economy. And all with the maximum care for the environment. Reliable: the ruggedness of the engine ensures high efficiency and constant quality at all times Lightweight and manoeuvrable: guaranteed constant cutting performance even after long hours in operation Simple: easy to start and effortless to use and maintain Confortable: equipped with an anti-vibration system and ergonomic and comfortable handle with soft covering and controls easily reached with just one hand, including the on/off switch (always on) TECHNICAL DATA Power/Displacement Shaft arm diameter Handle Cutting components Harness Fuel tank capacity Weight
BC 270 S
single single 5.7 Kg
BC 270 T 1.3 HP - 1.0 kW/27 cm3
BC 300 S
BC 300 T 1.5 HP - 1.1 kW/30 cm3
26 mm handlebar single handlebar 130 mm dia. Load&Go line head with 2.40 mm line 255 mm dia. disc with 3 blades single with comfort cushion single single with comfort cushion 0.58 L 6.0 Kg 6.0 Kg 6.3 Kg
27 cm³ 1.3 HP (1.0 kW) and 30 cm³ 1.5 HP (1.1 kW) 2-stroke engine: generous torque output, lightweight and comfortable when used for demanding and continuous work.
Piston with 2 rings, diecast cylinder with nickel plating, forged con rod and crankshaft: impart high strength and durability to the engine.
WALBRO digital coil with electronic control and revs limiter: for easier starting, enhanced performance thanks to uniform combustion, and reduced fuel consumption.
Aluminium cover and clutch housing: to optimise and reduce the weight of the engine while assuring ruggedness and durability.
‘Always-on’ system: the on/off switch returns automatically to the “on” position after each stop.
130 mm dia. Load&Go head with 2.4 mm dia. line: for straightforward line replacement - just 20 seconds to rewind the line and resume work.
Ergonomic loop and handles: clad in soft rubber provide an anatomic and comfortable grip of the tool in all operating conditions.
Large-size paper air filter: for greater filtration capacity and a hermetic seal against the ingress of microparticulate thanks to the external gasket.
THE SMART TRIMMER HEAD twenty — the number of seconds needed to reload, zero — the number of tools needed to do the job, zero — the difficulties involved. The new LOAD&GO head is just what you wanted. The design reflects a thorough-going, worldwide survey of user needs. Practical, dependable, and tough. Easy to use and to fit, always ready to perform, resistant to impact, wear and vibration. Reloaded in just a few simple steps, without even getting your hands dirty. Also incorporates the tried and proven TAP&GO line release system, for uninterrupted cutting. Fits all types of brushcutter, for home use and professional use alike.
Technical specifications: LOAD&GO easy loading system TAP&GO line feed system Interchangeable reinforced aluminium eyelets Interchangeable ergonomic knob Reinforced plastic body
2
1
LOAD… Align the eyelets. Place the spool in the head, then insert one end of the line through one eyelet and the other through the eyelet opposite, so as to obtain two equal lengths.
It’s an Emak S.p.A. trademark 42011 Bagnolo in Piano (RE) Italy Tel. +39 0522 956611 • Fax +39 0522 951555 info@myoleomac.com • www.myoleomac.com
&… Turn the knob clockwise.
3
GO! The head is ready for use.
www.youtube.com/MyOleoMac
001101970
Available diameters: Ø 110 mm compatible with 2 to 3 mm line Ø 130 mm compatible with 2.4 to 4 mm line