2V0-622 Exam Dumps, Pass4sureVMware Practice Test Questions - 2019

VMware 2V0-622

https://www.realexamcollection.com/vmware/2v0-622-dumps.html

Practice Test

VMware - 2V0-622

Topic 1, Exam Set A Question #:1 - (Exam Topic 1) Which two choices are applicable to vSphere Availability? (Choose two.)

A. Admission Control B. Heartbeat Datastores C. VM Startup/Shutdown D. Power Management Answer: A B Question #:2 - (Exam Topic 1) Which three prerequisites must be in place prior to enabling secure boot for a virtual machine? (Choose three.)

A. VirtualMachine.Config.Settings privileges B. an encrypted USB drive C. Virtual Hardware version 13 or later D. Virtual Hardware version 12 or later E. EFI firmware Answer: A C E

Question #:3 - (Exam Topic 1) Which are the two network requirements for a VMware vSAN 6.5 cluster? (Choose two.)

A. Multicast must be enabled on the physical switches and routers that handle vSAN traffic.

B. vSAN requires IPv6 only.

C. All hosts must have a dedicated 40GbE NIC. D. The vSAN network supported IPv4 or IPv6.

E. vSAN requires IPv4 only.

2 of 5

Practice Test

VMware - 2V0-622

Answer: A D

Explanation

https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.virtualsan.doc/GUID-AFF133BC-F4B6-4753http://cormachogan.com/2014/01/21/vsan-part-15-multicast-requirement-for-networking-misconfiguration-detected/ Question #:4 - (Exam Topic 1) Which are two correct descriptions of consumed memory and active memory? (Choose two.)

A. Consumed memory metric is the amount of memory that the virtual machine has recently used.

B. Active memory is the exact amount of memory that is currently in use by the virtual machine, plus a 25% buffer (default setting).

C. Consumed memory metric is the maximum amount of memory used by the VM at any point in its lifetime.

D. Active memory is an estimation of the amount of memory that is currently used by the virtual machine, plus a 25% buffer (default setting).

Answer: C D

Question #:5 - (Exam Topic 1) Which is the block size on the VMFS6 datastore?

A. All small and large file blocks are 8MB. B. All small and large file blocks are 1MB. C. Small file blocks are 512KB. large file blocks are 64MB. D. Small file blocks are 1MB, large file blocks are 512MB. Answer: D

3 of 5

Practice Test

VMware - 2V0-622

Topic 2, Exam Set B Question #:6 - (Exam Topic 2) How can a vSphere administrator ensure that a set of virtual machines run on different hosts in a DRS cluster?

A. Add the VMs to a vApp. B. Use a VM-Host affinity rule.

C. Place the VMs in different folders.

D. Use a VM-VM affinity rule.

Answer: D

Question #:7 - (Exam Topic 2) Which command can be run to troubleshoot connectivity problems with vmkernal network interfaces?

A. esxcli network B. vicfg-vmknic C. vmkping D. net-stats Answer: C

Question #:8 - (Exam Topic 2) Which are the three supported backup types for the vCenter Server Appliance 6.5? (Choose three.)

A. File-Based Backup B. vSphere Storage APIs-Data Protection C. Replication D. Snapshots E. vSphere Data Protection Answer: A B E

4 of 5

Practice Test

VMware - 2V0-622

Question #:9 - (Exam Topic 2) When will vSphere Data Protection delete the expired backup image of a Platform Service Controller?

A. After the expired backup image is restored.

B. During the next backup window following expiry.

C. During the next maintenance window following expiry.

D. Immediately after the retention period has expired.

Answer: D

Explanation https://docs.vmware.com/en/VMware-vSphere/6.0/vmware-data-protection-administration-guide-60.pdf ‘During maintenance periods, VDP examines the backups in the appliance and evaluates whether the backupretention period has expired. If ithas expired, VDP removes the expired backup from the appliance.’ Question #:10 - (Exam Topic 2) The vSphere HA agent has been in the "Agent Unreachable" state on a single slave ESXi host for over a minute. The master and slave ESXi hosts are connected to the vCenter Server Appliance.

Which should be the first step for validation the network configuration?

A. Log into the affected slave ESXi host via console or SSH and attempt to ping the master ESXi host over the vSphere HA network.

B. Log into the master ESXi host via console or SSH and attempt to ping the vCenter Server Appliance over the vSphere HA network.

C. Log into the affected slave ESXi host via console or SSH and attempt to ping the vCenter Server Appliance over the Fault Tolerance network.

D. Log into the vCenter Server Appliance via console or SSH and attempt to ping the affected slave ESXi host.

Answer: D

https://www.realexamcollection.com/vmware/2v0-622-dumps.html

5 of 5