Fat Mag June August by Engage Media

CATALOGUE SALE JUNE-AUGUST 2016

View past and present editions at www.cssfatmag.com.au

The Ramset Way

How they built a simple idea into a thriving international business

Tax time

We run through the new rules around salary packaging. Page 41

Working smarter

Solutions for respiratory and hearing problems at work. Page 23

Find us on Facebook! Weâ&#x20AC;&#x2122;re at www.facebook.com/ constructionsupplyspecialists HE

SIVE

S TOOLS M A

FA ERS

M AT E F A S TE

OLS

ADHESIVES T O

Become a F.A.T. MATE

and you could win your share of $17,500! See page 5

FA S T E N E R S A D H

FASTER • STRONGER • SMARTER

DJR180 - 18V BRUSHLESS RECIPRO SAW LI-ION • Tool-less shoe adjustment & blade change

DGA506/8- 18V BRUSHLESS ANGLE GRINDER 125MM LI-ION • Automatic Torque Drive

DLS714 - 18VX2 BRUSHLESS SLIDE COMPOUND SAW LI-ION • Most powerful in the world thanks to 18Vx2 technology

DHP481 - 18V BRUSHLESS HAMMER DRIVER DRILL LI-ION • 125Nm of max lock torque

DTD148 - 18V BRUSHLESS IMPACT DRIVER LI-ION • Staggering 175Nm of max fastening torque

DJR360 - 18VX2 BRUSHLESS RECIPRO SAW LI-ION • Tool-less shoe adjustment & blade change

DHS680 - 18V CIRCULAR SAW 165MM LI-ION • 45º and 50º bevel cutting with auto retract guard

DTW281 - 18V BRUSHLESS IMPACT WRENCH LI-ION • 1/2” Square drive anvil • 280Nm of max torque

OVER 125 TOOLS

E G N A R E&OE / A695-16

Construction Supply Specialists Pty Ltd Administration - Head Office 6 Broadfield Rd, Broadmeadows VIC 3047 Tel: (03) 9357 4228 Fax: (03) 9357 4229 jeff@cssgroup.com.au www.constructionsupply.com.au

CONTENTS June – August 2016

About us The store listed on the front of this magazine is a member of the Construction Supply Specialist Group. While the majority of your work will be conducted with your local CSS Member, this store is part of a national network of stores that can provide you with exceptional service and support wherever you may be working in Australia. For more store locations, visit www.constructionsupply.com.au.

Catalogue Index AIR HOSE & COUPLINGS Nitto Kohki

ABRASIVES 3M Pferd

57 36

BENCH GRINDERS Abbott & Ashby

CASTORS

Richmond Wheel & Castor Co.

CHEMICAL ANCHORING Iccons Ramset

29 19

COMPRESSORS FIAC

CUTTING TOOLS Sutton Tools

20&21

DIAMOND BLADES Saint Gobain

DRILL BITS & SETS Bordo Sutton Tools

HAND TOOLS & STORAGE

60 20&21

Apex Tools Kincrome Milwaukee Sheffield Group Sidchrome Spear & Jackson White International

LASERS Imex

LUBRICANTS Dy-mark WD 40

55 39 49 46 44 47 57 42 48 54

MASONRY ANCHORING Iccons

60 46

Nesting instinct

Beaver Brands 32&34 Impact-A 40 Richmond Wheel & Castor Co. 56

MEASURING TOOLS

Apex Tools 55 Stanley 45 Toledo 53

NAILING TOOLS

Airco 6 DeWalt 47 Hitachi 35 Powers Fasteners 58

PAINT AND METAL PROTECTION Dy-mark WD-40

POWER TOOLS & ACCESSORIES Bosch Hitachi Makita Metabo Milwaukee

REBAR TIER

MASONRY DRILLING Bordo Sheffield Group

MATERIALS HANDLING

Airco MAX

48 54

31 35 2 37 49 6 48

RECOIL KITS Sutton Tools

RELEASE AGENTS Impact-A Lanotec

22 32

SAFETY PRODUCTS 3M Beaver IFS Paramount

57 8,32&34 50 9

SHOVELS & RAKES Spear & Jackson

SCREWS & SCREW SYSTEMS Bremick Buildex

See inside back fold-out pages for specials from these leading brands:

DeWalt Gear Wrench Hot Devil Impact-A Paramount Safety Milwaukee NIPEX Nitto Kohki Senco Sterling Stanley Sutton Tools

SECURITY LIGHTS Powercell

Bostik HB Fuller

TAPE 3M Bear

TIMBER CONNECTIONS

Simpson Strong Tie

VACUUMS Metabo

The Ramset Way

Ramset Fasteners grew into a thriving business on a firm commitment to innovation and Aussie manufacturing.

43 7 57 39

Pferd

Working Smarter

Get covered with our double feature on protecting your respiratory and hearing systems.

New rules for tax time

WHEELBARROWS WIRE BRUSHES

WELDING MACHINES & ACCESSORIES Richmond Wheel & Castor Co.

12 14

SILICONES/SEALANTS/ ADHESIVES

Dynaweld 47

When a builder envisioned a state-of-the-art chicken shed, he turned to a CSS member who understood the difficulties.

Here’s what you need to know about new changes to fringe benefits tax.

56 36

Notes to the consumer: Some products are subject to plus freight costs where applicable. Some items may not be stocked in all stores, but can be ordered as required. Prices are valid while stocks last and are subject to change without prior notice. CSS Pty Ltd reserves the right to correct printing errors and omissions. All items include GST.

FIND out who won thet Fa ultimate break in the Chance promo! p4 Construction Supply Specialists

Need to know

Jobs boost in Queensland’s largest suburban renewal project In a major boost to apprenticeships and construction jobs, work has commenced on the biggest stage of Queensland’s largest suburban renewal project. Minister for Housing and Public Works Mick de Brenni assisted today’s concrete pour on the foundations at Cornerstone Living in Sunnybank. “This ten year, ten hectare project will deliver 1200 brand new apartments and town homes for around 3000 people when it’s completed,” Mr de Brenni said. “The Palaszczuk Government is

delivering for Queenslanders with 4600 jobs being created here on site during the life of the project. “This project will also become a great training ground for more than 240 apprentices who will start their careers here as part of that workforce. “This is a real opportunity for Brisbane to meet its growing housing needs, while shaping a brand new community that can live and grow in a very sustainable and environmentally friendly way in such a great part of Brisbane. “The $600 million project is creating a new master planned community

which is close to schools, universities and transport.” Member for Sunnybank Peter Russo said the project was crucial to meeting the housing requirements of the local area. “I am proud to get behind great projects like Cornerstone Living,” Mr Russo said. “It’s great to see high quality developments that include space and amenities for everyone to enjoy and that will become another focal point for our community.” The construction of Stage D is now underway with today’s concrete pour, and will comprise 52 dwellings. Executive Chairman of Consolidated Properties Don O’Rorke said this development will provide a range of benefits for the community in terms of housing and jobs. “The start of Stage D marks our 200th dwelling at Cornerstone and we look forward to creating a community that will set new benchmarks in town planning, building design and sustainability. We have a proud history of delivering high quality development and creating homes and communities that people love.” 

Fat Chance winners Congratulations to the winners of the last edition’s competition, who won their “Ultimate Break for Freedom” and can enjoy spending their $3500 travel voucher. A big thanks to our sponsors: Milwaukee, Thorzt, Pro-choice and Impact-A. VIC: Liam Cummings NSW: Owen Pearce NT: Mark Brailsford WA: Gavan Dixon QLD: Rodney and Gavin Edwards

Construction Supply Specialists

1. Gary Beeston from Brisbane Fasteners, alongside the Gavin & Rod Edwards from Aristo Products. 2. Liam Cummings with Fred Hall from DBF. 3. Owen Pearce being congratulated by Mike Ryan from VEK Tools, McGraths Hill. 4. Mark Brailsford with Ray Patrick from NT Fasteners Coolalinga. 5. Gavan Dixon with David Clarkson from AG Trade, Esperance

FASTENE

TOO

SIVES

TOO

FASTENE

VIA any one of our 70 S tores Nationally! - Bonus O ffers - V.I.P Invitations - Exclusive Deals - Be the first to know about new stuff - F.A.T. MATE D iscounts

www.constructionsupply.com.au *35 x $500 vouchers to win. T&C’s Apply. Offer Valid 1st June – 31st August 2016.

Need to know

No negativity when it comes to negative gearing Malcolm Turnbull has ruled out any changes to negative gearing in his upcoming May budget and the Master Builders Association has come out in support. The Master Builders Association has stated it is confident that the current negative gearing taxation system and Turnbull’s statement will continue boosting Australian construction. “The retention of negative gearing provisions for new and established homes is a long held policy by Master Builders and therefore Master Builders strongly backs today’s announcement,” said Master Builders Association CEO Wilhelm Harnisch. “Confidence in the residential building sector will be boosted by the Government’s announcement that it has out ruled out any change to the current negative gearing arrangements in the forthcoming May Budget,” said Harnisch.

Turnbull came out swinging against Labor’s proposed plans to shift away from negative gearing. He claims that the changes would massively damage the construction industry’s work centre—the Australian home. Harnisch was appreciative of the news on behalf of the Master Builders Association and Australian tradespeople. “The Prime Minister’s announcement means $8 billion of investment each year spent on renovation of private rental properties will continue and thereby boost economic growth and jobs for tradies,” Harnisch said. “Negative gearing underpins investment, largely by mums and dads, in private rental properties and plays a critical role by supplementing the shortage in public and social housing rental stock where there is a waiting list estimated to be around 200,000 households,” he said.

While in support of the existing negative gearing policies, Harnisch also called on politicians to tackle other areas of nation’s housing issues. In particular, the construction industry could be further boosted by redress of the nation’s housing shortage through stock increase. “Master Builders in strongly backing today’s announcement is now looking to the major parties for sound policies that will tackle the structural barriers to housing affordability which is to increase the supply of new housing. “Master Builders has called for national competition policy payments to implement removal of the current unnecessary blockages that delay the supply of new housing. “This is one of the key housing affordability reforms that Master Builders will be calling on both parties to deliver on for the next term of government,” Harnisch said. 

All prices include GST

Fusion™ FN65DA DA Series Angled Brad Nailer

Airco XDL-4000 Automatic Rebar Tying Tool (14.4V Li-ion)

APPLICATIONS: Finish and Trim, Baseboard, Cabinets, Caskets, Chair Rail, Door & Window Casing, Furniture Trim & Panelling.

APPLICATIONS: Rebar Joining

GENERATION II FEATURES Including 1.5 AH Li-ion Battery Technology ✓ Cylinder Life 250,000 shots before losing 3-5% of power output ✓ Multi-Position Control Switch (Sequential, Off or Contact) ✓ Eco-Friendly 1.5AH 18v Li-ion Battery with LED charge indicator ✓ Universal Battery Interchangeable with other Senco Fusion tools ✓ Thumb Wheel Depth of Drive with Depth Gauge ✓ Patented Reflex-Shot Technology ✓ Robust Aluminium Drive Cylinder

$949.00

TOOL SPECIFICATIONS Weight Height Length Fastener capacity Fastener range Mode of operation

Battery Charger

2.81 kg 343mm 330mm 110 Nails 32-65mm Selectable drive switch allows either sequential or contact actuation. Li-ion 1.5AH 18V (1 Yr Warranty) 80% in 15 mins 100% in 45 mins

12-40mm

✓ ✓ ✓ ✓ ✓ ✓

Lightweight compact and easy to use Reduces Tying Time Brushless Technology Li-ion High Capacity Battery One Hand Operation Plastic Carry case

$1899.00

TOOL SPECIFICATIONS Weight Dimensions (L)x(W)x(H) Supply Max Tying Diameter Time of Making a Knot Turns per Tie Ties per Charge Length of Wire for Tying

2.2kg 285mm x 100mm x 296mm 14.4v / 3.0AH Li-ion Battery (90min Charge Time) 40mm 0.9 seconds 3 wraps over 2500 ties / 3 turns 780mm / 3 turns

FulaFlex 550

Polyurethane Sealant FulaFlex 550 PU LM is a one component moisturecuring low modulus Class A polyurethane sealant with excellent joint movement capabilities. It cures sealant and exhibits excellent adhesion to a wide range of substrates.

Firesound

Fire Rated Sealant Firesound™ is formulated primarily to perform as a barrier to the incursion of fire through expansion joints and wall penetrations such as pipes or cables. Firesound™ is also an effective acoustic sealant. KEY BENEFITS Fire rating for gaps up to 50mm

KEY BENEFITS +/- 35% movement Excellent weather and UV resistance Class A Joint Sealant

Low VOC Polyurethane Sealant

(AS1530.4-2005) Excellent acoustic properties (STC 65)

Paintable Intumescent; expands when exposed to fire or extreme heat

joint movement capability

Available products

Available products Resource code: 7156674237

Colour: Black

Firesound™ Fire Rated Acoustic Sealant 450g cartridge Resource code: 6025914042 Colour: Grey

Resource code: 7156684237

Colour: White

Firesound™ Fire Rated Acoustic Sealant 600mL sausage Resource code: 6026194133 Colour: Grey

Resource code: 7156704237

Colour: Grey

Firesound™ Fire Rated Acoustic Sealant 600mL sausage Resource code: 6011944132 Colour: White Firesound™ Fire Rated Acoustic Sealant 10L pail Resource code: 6011741513 Colour: Grey

Consult a fire engineer before use in fire rated application

Need to know

Master Builders Association concerned by Senate defeat on ABCC Bill The Master Builders Association has hit out against the Senate’s negative vote on the ABCC Bill. Wilhelm Harnisch, CEO of the Master Builders Association, took the senate to task claiming the Bill’s rejection would cut already dwindling confidence in the sector. “The Senate’s rejection of the ABCC Bills will not boost confidence in the stalled commercial construction sector,” Harnisch said. The association called for a move to increase interest in the sector, claiming the bills would open up space for investment and counter current misgivings. “A boost in confidence is what’s needed for pickup in commercial building activity but Master Builders National Survey of Building and

Construction for the March quarter shows that builders remain lukewarm about future prospects,” said Harnisch. Harnisch was particularly critical of the lost opportunities the bill may have provided for improved infrastructure and foreign investment. “The decision by the Senate to reject reform that would remove reduce the cost of building commercial projects as well as schools and hospitals by blocking unproductive union agreements is blow to Australia’s commercial builders. “Overseas investment is a major contributor to commercial construction projects and the failure to restore the ABCC to tackle the building union’s

ingrained culture of unlawfulness will undermine our efforts to remain internationally competitive and attractive to international investors,” Wilhelm Harnisch said. The senate’s final defeat of the Bill has set the country in motion for a double dissolution, with Malcolm Turnbull expected to call an election after the early May budget week. 

MACK ZIP & GO. STYLISH 6” HONEY SUEDE BOOT WITH SIDE ZIP. FOR THE WORKER THAT NEEDS TO TAKE THEIR BOOTS OFF MULTIPLE TIMES A DAY AND ARE LOOKING FOR GREAT VALUE.

CARPENTER $109 ea inc GST

$16

T Inc.GS

$10

$25

T Inc.GS

AS/NZS1337.1:2010 Lic 25492

AS/NZS 1801 Lic 20500

BGVCE

6000

HHV6

Cyclone Goggle Liquid Splash Protection Anti Fog Lens Foam Bound

Assembled Browguard With Economy Clear Polycarbonate Visor

• Lightweight, colour range of vented hard hats

Hard Hat Vented 6 Point Pro Lock Harness

• DurablePVCframe

• Economy Visor (VCE) Brow guard (BG)

• Individually packaged

• Soft foam lining for extend wearer comfort

• Ready assembled to be on the task immediately

• Available in white, yellow, red, blue, green,

• 35mm soft head strap to equalize strap

• 99.9% UV protection for outdoor wear

orange and fluoro yellow (colours can be

• Spring design on bottom of frame to accommo-

assigned to location, job or industry)

date wide varieties of facial shapes

• 6 point ProLock harness

• Low profile design fits under hard hats

• Air vents and cotton sweatband prevents

• Spherical lens offers brilliant optical and peripheral vision • Increased eyeball to lens distance to reduce fogging • Fits comfortably over prescription eyewear

perspiration build-up, extended peak for added protection and an edge gutter to catch and

.5 $22 T

deflect rain

Inc.GS

$25

T Inc.GS

.5 $8

T Inc.GS

AS/NZS 1270:2002 ID No 3396

EMCOB AS/NZS 1270:2002 ID No 3396

EPOU-50 Tradie 50 Pack Pro Bullet Earplugs Class 5

AS/NZS 1716.2012

Cobra Earmuffs Class 5 28Db

Filter Spec Pro Goggle Combo Mask

• General purpose use • Hearing protection for noise levels to 110dB(A) • Convenient fold-away construction • High quality ear cushions

• Disposable, PU foam

• Inner foam and headband cushions provide

• Pairs packaged in individual poly bags

FSPG

• Class 5, SLC8028dB

• Class 5, SLC8027dB • Hearing protection for noise levels to 110 dB(A)

AS/NZS 1337.1.2010 ID No 3543

• Optimal Fit, Breathing Resistance and Filtration • Minimizes Lens Fogging due to seal created • Fully adjustable strap to achieve the optimal fit & comfort • Anti-Fog, Anti-Scratch, Medium Impact

comfort during extended wear • Low clamping force applies minimum pressure while maintaining a tight, snug seal

Protection Lens • Fully adjustable strap to achieve the optimal fit & comfort • 5.5 base curve, one piece lens offers unobstructed viewing • Protects against nuisance-level organic

$22

T Inc.GS

vapours in addition to P2 rating

$15

• Moulded nosepiece for close fit • QuickLock straps for easy fit and release

T Inc.GS

• Exhalation ProValve for extra airflow

AS/NZS 1716 ID No 5051

T Inc.GS

PC822-3 Blister Pack Of 3 Promesh Disposable Mask Dust/Mist/Fume

EN 388 EN 511

• DurablePVCframe • Flexible mesh which ensures optimum shape

3221

retention for a perfect, airtight fit during long

NPFF

periods of wear

RSHV

• P2 rating protects against mechanically and

Stinga Frost Winter Pvc Foam Glove

thermally generated particles

Hi Vis Rain Suit Set Jacket And Pants Fluro Orange Or Fluro Yellow

• Moulded nosepiece for close fit

• PVC/Polyester with elastic cuffs plus studs

• Exhalation ProValve for extra airflow

120

• PVC Foam Coating for oil/water repellence • Dual layer with brushed acrylic liner keeps

• QuickLock straps for easy fit and release

hands warmer • Sizes: 7-11

• Two large pockets • Hood with drawstring • Sizes S, M, L, XL, 2XL, 3XL, 4XL, 5XL • Sold and Packaged Individually

ORCE IN YOUR WORKF T N A W U O Y WHY WOULD

ANYTHING EL

SAFE AS.

Members in action

Nesting instinct When a builder had a vision of constructing a stateof-the-art chicken shed, he turned to a CSS member who understood the difficulties involved.

Construction Supply Specialists

hen Sydneysider Eddie Wehbe moved his family to the country, it wasn’t to embrace a relaxing, laid-back lifestyle. Instead, he built and manages a state-of-the-art farm that has him on call 24 hours a day. Sure, it’s exhausting, stressful and time consuming but he’s never been happier. “I like a challenge,” says builder/ carpenter Wehbe who purchased the 174.4-hectare property that’s located 12km west of Goulburn, New South Wales. While the region is

predominantly used for grazing, he had a vision of launching a poultry farm back in 2010. “I’ve always had a strong passion for agriculture,” he explains, “and to ensure I keep going in the right direction, I spent about a decade on research prior to making the move. I haven’t ceased being a builder; it’s just that now I’m building my poultry farm.” His dream of creating a selfsufficient, drought-tolerant enterprise that operates all year round has come to fruition. The farm includes

six 150-metre-long sheds that accommodate 30,000 chickens. The farm can turn over five batches of chickens a year. In the early stages, he turned to business development manager Chris Nesci of No.1 Roofing & Building Supplies, a family business that’s opening its fifth branch later this year. Nesci recalls: “When Eddie explained what he was planning to do, I was blown away by the size and scale of the operation, and the personal investment that he was putting into it—and the

change in career. He had some big dreams but I believed in him. He was planning a colossal, state-of-the-art poultry farm unlike anything that had been built before in that particular industry. Not only that, he wanted to do it on a budget.” Both Wehbe and Nesci worked together to select the best quality products for the 17,000 square metres of roofing. They chose Colorbond steel, manufactured by BlueScope Steel Australia, as well as wall curtains that allow the sides to be opened and

closed, and concrete for the footings and floors. Another material used was the B8 coated Bremick screws carefully selected for corrosive environments. Even in the early stages, Nesci was impressed with Wehbe’s business ethics. “He had an option to import steel from China but he chose to support the Australian economy and exclusively use BlueScope steel for everything,” Nesci says. “That includes the structure, water tanks, roof sheets, gutters, flashings—the whole thing. “At No.1 Roofing & Building Supplies, our business is all about honesty. Sure, we were there to get the sale, but Eddie is a family man who works hard. We saw the dream and we wanted to be there with him throughout the whole project. It’s been a real partnership. “This is an ethos that underpins all CSS member businesses, providing solutions rather than just selling something to customers. We’ve been a member of CSS for a few years now and the group network helps us provide a proper selling solution, as we can access over 100 leading brand suppliers and 70 stores nationally. So if we need to get advice to help solve a problem, or get technical support to recommend a product to application, this is only a phone call away.” The sheds include eaves to provide shelter from the wind, rain, sun and frost. Wehbe explains: “The design allowed us to do away with a whole lot of mechanical ventilation. The more efficient and natural the ventilation system, the better the environment in the shed, and the happier the birds are going to be. Curtains have been installed so the whole side of the shed gets plenty of fresh air and breeze—it’s as good as being outside.” Positioned on a ridge to catch the wind and keep humidity low, the sheds are spacious to ensure the birds’ welfare. “There are no cages; our birds roam free in the sheds,” says Wehbe who treats animal welfare as his number-one priority. “They walk and scratch around on a mixture of wood shavings and sawdust.” He set out to create a benchmark facility that has actually set a new standard of quality. The sheds Construction Supply Specialists

Members in action

The chook sheds from the air—which gives an idea of the scale of Wehbe’s vision.

incorporate thermal insulation panels for energy efficiency, and are designed for natural airflow and hygiene. “They’re very presentable, very clean, easy to maintain, and it’s easy to control vermin,” he says. The regulation of the climate in the shed is all done via computer.

The system can make adjustments, depending on wind, storms, temperature and humidity. The sheds’ curtains can instantly be moved up and down, and the ventilation sequences can be easily adjusted. “Virtually all other kinds of agriculture are dictated by the elements,” says Wehbe. “Our

poultry farm operates independently from the weather and we can monitor and control the temperature and humidity in each shed.” He’s found that this modern approach makes it easy for staff to manage, and it’s allowed Wehbe to expand his business with additional sheds planned for the near future. Apart from running his poultry business, he also runs cattle as a hobby. He’s been so busy, he’s hardly had time to think about his days as a Sydney cityslicker. “I haven’t missed being in the city for a second,” says Wehbe, whose wife Lauren looks after the financial side of the business. “We love it here.” Nesci, who’s visited the farm quite a few times, was impressed by Wehbe’s vision. “He wanted to design chicken sheds that were going to outlive him,” he says. “Typically, sheds last about 10 years. I think there’s every chance that Eddie’s will still be standing in 40 or 50 years time.” 

Drills Faster Lasts Longer A revolution in corrosion protection and drilling performance Extreme Corrosion Protection Superior Drilling Performance

Vortex™ high performance screws from Bremick Fasteners Bremick have proudly engineered an innovative range of high performance screws, under the Vortex™ brand, uniquely manufactured to exceed the demanding requirements of the Australian Construction Industry. Designed and developed by Bremick, the range of Vortex™ Universal screws suits a wide variety of applications from roofing to decking, batten fixing, flashing fixing, cladding, fibre cement, polycarbonate and fibreglass solutions. Vortex™ Universal screws are now also available in the new revolutionary B8 Coating which lasts up to four times longer than Class 3 Galvanising, providing superior corrosion protection and faster drill performance.

PROUDLY AUSTRALIAN

13 All prices inc GST

Polyurethane Coiled Hose

Crimped Hose Assemblies PRICES FROM 00

PRICES FROM 00

$45.

$39.

Inc GST

▪ Hose sizes designed for use with Nitto type nut coupling and fittings ▪ Small coil diameter stops tangling ▪ No air leaks and oil resistant ▪ Straight end sections eliminates hose splitting ▪ Excellent memory and stores neatly ▪ Hoses fitted with Nitto Kohki 200 Series Nut Cuplas ▪ Cuplas made in Japan Hoses made in USA Model No. HA0803B HA0805B HA0808B HA0810B HA1003B HA1005B HA1008B HA1010B HA1203B HA1205B HA1208B HA1210B

Size 8 x 5mm 8 x 5mm 8 x 5mm 8 x 5mm 10 x 6.5mm 10 x 6.5mm 10 x 6.5mm 10 x 6.5mm 12 x 8mm 12 x 8mm 12 x 8mm 12 x 8mm

Price

Working Length

(Inc GST)

2m 4m 6m 8m 2m 4m 6m 8m 2m 4m 6m 8m

$45.00 $50.00 $60.00 $66.00 $49.00 $57.00 $70.00 $80.00 $55.00 $65.00 $80.00 $95.00

▪ ▪ ▪ ▪ ▪ ▪ ▪

Lightweight, non-conductive, non-marking UV Stabilised, temperature range - 23°C to + 70°C Bend Radius 100mm (3/8” and 1/2”) Reinforcement : Spiral Synthetic Yarn Exceeds AS2554:1998 Class B Fitted with Nitto 200 Series ‘One Touch’ 3/8” Cuplas Cuplas made in Japan Hoses made in USA Model No. HA200-30SHP10 GS HA200-30SHP20 GS HA200-30SHP30 GS HA200-40SHP10 GS HA200-40SHP20 GS HA200-40SHP30 GS

Size 9.5mm 9.5mm 9.5mm 12.7mm 12.7mm 12.7mm

Hose Length 10m 20m 30m 10m 20m 30m

Price

(Inc GST)

$39.00 $59.00 $79.00 $59.00 $89.00 $125.00

200 Series Cupla Combo Packs TA NCSTAR

TA 2 NCSTAR

STARTA PACKS

5 x 20PM ~ 1/4” BSP Male 2 x 20PF ~ 1/4” BSP Female 2 x 200-20SM ~ 1/4” BSP Male se Kit NC3/8” Ho

se Kit NC1/2” Ho

STARTA2 PACKS

5 x 20PM ~ 1/4” BSP Male 2 x 20PF ~ 1/4” BSP Female 2 x 200-20SM ~ 1/4” BSP Male 1 x 200-30SH ~ 3/8” Hose 1 x 30PH ~ 3/8” Hose 2 x OTK Clamps 3/8” or 10mm HOSE KITS

$33.00 Inc GST

1 x 200-30SH ~ 3/8” Hose 1 x 30PH ~ 3/8” Hose 2 x OTK Clamps

$49.00 Inc GST

1/2” or 12mm HOSE KITS

$49.00

$59.

Inc GST

1 x 200-40SH ~ 1/2” Hose 1 x 40PH ~ 1/2” Hose 2 x OTK Clamps

CUSTOMER BBQ & TRAINING EVENT • • • •

ATRA ACE DRILLING MACHINES SELFER HYDRAULIC PUNCHES AIR CUPLAS & SAFETY CUPLAS BEVELLERS

• • • •

GRINDERS Enquire CHISELS Today! SANDERS KUKEN PNEUMATIC TOOLS

CMY

DRILLS FASTER LASTS LONGER A revolutionary re-think of drill tip design. • High Performance multi-faceted cutting tip. • During independant lifetime testing Delta Point bits lasted 10 times longer than conventional split point bits. • High productivity – testing under constant load Delta Point bits drilled 2 times faster in ferrous metals. • Precision ground M2 High Speed Steel.

ENGINEERING EXCELLENCE

The Ramset Way Jim Osborne of Ramset: “Our approach is about solving problems for the end user.”

Construction Supply Specialists

Cover story

Ramset Fasteners developed a simple idea into a thriving global business on the back of an unshakeable commitment to Australian manufacturing and user-focused innovation.

amset Fasteners is a great Australian success story. From humble beginnings in 1952, the company has built a strong reputation within the building and construction industry for developing, manufacturing and supplying leading edge drilling, anchoring and fixing products for more than half a century. Today, Ramset is one of more than 100 companies that make up global conglomerate, Illinoi Tool Works (ITW), that employees 47,000 men and women in 57 countries with an annual turnover topping US$14.5 billion. However, the Ramset story began a world away in the British shipyards of the early 20th century. In the years leading up to World War I, English

early 1950s when the company ignored the traditional sales approach in favour of a fleet of radio-controlled after market service vans. This allowed the company to build strong relationships with clients based on the technical expertise of their ‘Ramset man’—not the fast-talking ability of sales staff. The ‘Ramset man’ worked onsite with engineers, architects and contractors to develop a practical knowledge of the challenges faced on Australian construction sites. This hands-on approach to developing products and services that add real-world value to construction operations remains a key part of the company’s DNA today. “There’s no doubt that the business has been founded on a view of

“Our approach is about understanding our customers’ challenges and figuring out what we can do to provide a more effective solution.” engineers experimented with a new tool that harnessed the explosive powder that had been developed for the munitions industry. This would be the principle behind the first powder actuated fixing tool. In 1952, John Siddons—a Victorianbased businessman who was elected to the Australian senate in the 1980s— secured the rights to the world’s first commercially viable powder actuated fixing system and Ramset Fasteners was born. This would serve as the basic prototype that would inspire the new company to research, develop and manufacture a diverse range of anchoring systems over the next 60plus years.

understanding end-user applications,” says Jim Osborne, business manager for ramsetreid Commercial Construction. “For us, that means being present on construction sites. Our engineers are out on site, working with all the elements of the construction trades, and looking at the best possible solutions. “It’s not about taking a pushapproach, but very much about solving problems for the end user and providing solutions relevant to construction sites. It’s about understanding their challenges and figuring out what we can do to provide a more effective solution.”

Call the ‘Ramset man’

However, solving problems on Australian construction sites required the flexibility to develop and adapt products to fulfil the specific needs of

Ramset’s remarkable success has been built on the company’s deep trade focus. This can be traced back to the

Home-grown solutions

Construction Supply Specialists

Cover story

local clients. For Ramset, that meant setting up Australian manufacturing operations to keep pace with a rapidly evolving local construction industry. Today, the company continues to develop and manufacture the bulk of its products out of its Victorian manufacturing facilities. “Locally manufactured, locally designed, locally developed and locally tested is a cornerstone of our value proposition in the marketplace,” says Osborne. “There is a difference in concrete around the world, which is why it’s so important for us to test and really refine our product in the exact situations and projects in this market and not on the other side of the world. Ultimately, all our development and testing is in substrates that are relevant to this part of the world. “Manufacturing in Australia means we can be more flexible, and certainly tap into local requirements. Whether you’re the project manager or the installer, you have absolute peace of mind that what we commit to in terms of performance has been tested in a lab location here in Chirnside Park with the same materials you’re using on that site in Barangaroo.”

Driving innovation Real-world expertise driving userfocused solutions, combined with local manufacturing capability to keep pace with new developments in the construction industry, is the formula that has powered more than half a century of Ramset innovation. “When you are close to the market and dealing with the trades, you see more opportunities,” explains Osborne.

Victoria—and the ChemSet range that has become a leading product in the chemical anchoring and reinforcement of concrete. This commitment to innovation extends throughout everything the company does—from product development right through to their packaging. “For example, we won a couple of packaging awards quite recently,” says Osborne. “We looked at the key pain points a contractor has when using one of our chemical products and decided we needed to develop packaging that is incredibly site tough, that is able to be used in our applicators, that uses 99.9 per cent of the material within the cartridge because wastage is an issue.

Taking on the world That’s where Ramset works hand-inhand with CSS member stores in the process of developing and distributing products. Ramset was a founding supply partner of CSS, and the companies have been working together for over 14 years. Ramset is known for a diverse range of iconic products that have become staples of construction sites around Australia—and the world. In addition to the famous DynaBolt and DynaDrill, Ramset has also pioneered Pulsa gas technology, which revolutionised fixing to concrete and steel by increasing the speed of on-site installations and reducing in place costs. The company is also behind the powerful FrameBoss—a fully automatic powder actuated fixing system designed and developed in

More than 50 years of success came with attention from global players, and in 2000 Ramset joined the ITW Group. However, says Osborne, ramsetreid has been able to stay true to its local roots and will continue to manufacture in Australia for the foreseeable future. “In today’s market the world is ever EPCON smaller and you’re dealing with and Dynamic loading Fire Rated competing against global players,” he says. “You need that global perspective, critical mass and the ability to develop technology platforms on a global scale—but at the same time we need to protect our local identity. “We’re taking a far more global view on technology that enables us to tap into projects that are happening Pull down Close to edge within the construction group and findfeature a way of customising those for local requirements. That’s why we make the product here. “It’s a challenging environment and we have to continually evolve and Damp holes make sure we’re providing the most relevant and value added solutions in the marketplace. So we look at global trends and how we can tap into them. If there’s a more efficient way to deliver a better outcome then we’re interested. The second we stop thinking like that is EPCONredundant.” the second we become Dynamic loading Fire Rated So if it’s a Ramset product you require, then visit any one of our CSS member stores who can assist you in purchasing, or advise you on Ramset product applications.  kg

Construction Supply Specialists Pull down feature

Close to edge

EPCON Dynamic loading

Fire Rated

Seismic

Drinking water safe

Cracked concrete

Drilled holes

Cored holes

HCR Pull down feature

Close to edge

ZINC

Galvanised

Stainless Steel 316

EPCON EPCON Seismic

Drinking water safe

Cracked concrete

Drilled holes

Cored holes

Brick & Hollow Wall

EPCON

Flooded holes

Oversized holes

Dynamic loadingloading Fire Rated SolidDynamic Concrete Fire Rated

Seismic SeismicDrinking water Cracked concrete Drilled holes Cored holes Cored Flooded Oversized Solidwater Concrete Cracked Dynamic loading Fire Rated Seismic Drinking concrete Drinking water Cracked concrete Drilled holes holes holes Flooded holes holesOversized holes Solid Concrete Damp holes safe safe safe

Made in Australia

Drilled holes

Cored holes

Flooded holes

Oversize

Hollow applications

EPCON Dynamic loading HCR

HCR ZINC

Galvanised

Fire Rated

Seismic

Drinking water safe

HCR

Pull down feature

Stainless Steel 316

Pull down feature

Close to edge

ZINC

Close to edge

Galvanised

ZINC

Galvanised

Stainless Steel 316Pull down

Stainless feature Steel 316

Close to edge

ZINC

Cracked concrete

Galvanised

Drilled holes

Cored holes

Flooded holes

Over

HCR Stainless Steel 316

kg Epcon C8

Brick & Hollow Wall

ETA

European Technical Approval ETAG 001 Part 5 Option 1

European Technical Approval ETAG 001 Part 5 TR023

ETA 10/0309 0679-CPD-0549

ETA 07/0189 0679-CPD-0276

Damp holes Structaset 401

ETA

Hollow applications Structaset 401

Damp holes

Structaset 401

Pull down feature

ETA

European Technical Assessment ETAG 001 Parts 1 & 5 Option 1

European Technical Approval According to TR 023

Anchoring into cracked concrete ETA-14/0148

Post-installed rebar connections ETA-13/0778

Close to edge

ZINC ETA Galvanised

Hollow applications

HCR

Chemset Maxima

ETA

Stainless Steel 316

European Technical Approval ETAG 001 Part 5 Option 1

European Technical Approval ETAG 001 Part 5 Option 7

ETA 13/0778

ETA 03/0008 0679-CPR-0011

Chemset 101 Plus & UltraFix Plus

Hollow applications

Hollow applications kg

ETA

European Technical Assessment ETAG 001 Parts 1 & 5 Option 1

European Technical Approval According to TR 023

Anchoring into cracked concrete ETA-14/0148

Post-installed rebar connections ETA-13/0778

BrickEuropean & Technical Approval ETAG 5 Option 7 HollowGalvanised Wall001AndPartStainless Steel Anchors ETA-13/0681 1020-CPD-090-029852

Damp holes

EPCON Seismic

Drinking water safe

EPCON EPCON EPCON EPCON Cracked concrete

Drilled holes

Dynamic Cored loading holes

Fire Rated Flooded holes

Seismic Dynamic loading Oversized holes

Drinking water Fire Concrete Rated Solid

Cracked concrete Seismic

Drilled holes Drinking water

safe safe Dynamic loading FireFire Rated Seismic Dynamic loading Rated Fire Rated Seismic Dynamic loading

Cored concrete holes Cracked

Flooded holes Drilled holes

EPCON

Oversized holes Cored holes

Made in Australia

Galvanised

Stainless Steel 316

Pull down feature

Oversized holes

Solid Concrete

Dynamic loading Fire Rated Flooded holes holes Solid Concrete Flooded holes Oversized Oversized holes Oversized Solid Concrete Cored holes Flooded holes holes

Hollow applications Drinking water Seismic Solid Concrete safe

Cracked concrete

Drilled holes

Cored holes

Made in Australia

HCR

HCR ZINC

Solid Concrete Flooded holes

Drinking water Cracked concrete Drilled holes Cored holes Drinking waterDrinking Cracked concrete Drilled holes Drilled Cored holes Seismic water Cracked concrete holes safe safe safe

Close to edge

Pull down feature

ZINCto Close edge

Galvanised

Stainless ZINC Galvanised Steel 316

HCR Stainless Steel 316

HCR HCR

HCR

load up today with all these mates!

Impact-A brand is owned and distributed by CSS

Working smarter

SPECIAL REPORT

Working Smarter We’ve all heard the old adage ‘work smarter not harder’, but working smarter in construction is about more than just getting the job done. It’s about the right tools for your job and making sure you’re protecting yourself and those around you from the work you’re doing. And this issue’s got you covered, read Fatmag’s special reports on how to work smarter to protect your respiratory and hearing systems by having the right gear for the right situation.

Construction Supply Specialists

Working smarter

While self-preservation in the form of steel capped boots and high-vis jackets is a priority for many tradespeople, the ability to inhale or exhale air free of contaminants remains a more pressing concern.

Room to breathe C

onstruction site workers can now breathe easier knowing the law is on their side when it comes to the use of respiratory protection devices (RPDs). Where once most adopted a “devil may care” approach to the use of any type of personal protective equipment (PPEs) on job sites, a tightening of workplace health and safety laws together with increased media exposure to asbestos-related workplace illnesses means workers are spoilt for choice when it comes to selecting the correct breathing protection equipment. However Peter Cutforth, the director of accredited registered training group Urban Global says workers would be foolish to think it’s a matter of donning a mask or respirator and hoping for the best. Rather than just affording employees working in compromised environments the chance to breathe uncontaminated air, Cutforth says determining whether to use a RPD is potentially a life or death issue. “Medical conditions from the inhalation of workplace chemicals or other toxic particles can be extremely serious, both in the short term acute sense, and in the long term chronic scenario. Consequently, the correct use of appropriate PPE can have potentially

life saving affects for workers and personnel on construction sites.” Cutforth says there are a number of workplace scenarios which require the use of RPDs including: for irregular or short duration operations, such as inspections and maintenance; for jobs where the location continually changes and so fixed engineering controls are not appropriate; where engineering controls have been installed but do not produce the concentration of their contamination to save levels and for entry into confined spaces. However the choice of which RPD to use will vary depending on what the airborne contaminants are and what health risk they pose, as well as the concentration level of the contaminant. How do you choose? Paramount Safety Products director Sam Gurgone says the filters in respiratory devices act as a barrier to potential airborne dangers by trapping them before they can enter the airway. The greater the potential risk, the greater the level of protection required, he says. “In the Australian and New Zealand market, the two most commonly used disposable respirators protection levels are P1 and P2. P1 will protect you against mechanically generated particles while P2 protects Construction Supply Specialists

Working smarter

“The correct use of appropriate PPE can have potentially life saving affects for workers and personnel on construction sites.” Peter Cutforth, Urban Global group

against mechanically generated particles and some thermally generated particles. Half Masks give you the added benefit of filtering a range of gasses and vapours.” Gurgone says for certain harsh chemicals, vapours or fumes the user may need a full seal around their face including their eyes and as such would require a full-face mask. However the producer of any chemical must produce a Material Safety Data Sheet (MSDS) that states the chemical compound and specifies the level of protection required. In addition, some manufacturers offer disposable respirators—which in PSP’s case are covered in a mesh-like plastic enabling the mask to retain its shape for longer

and in turn provide a better fit and seal over extended periods of use—or goggle and respirator combinations which offer a superior fit. Gurgone says there are a number of things to be wary of when selecting your RPD including ensuring the products are third party certified by organisations such as BSI Benchmark or SAI Global, where applicable. “This is your guarantee that the products and manufacturing processes are audited at least every 12 months to ensure consistent quality and in turn stated performance levels of the product are maintained. A product that complies with the standard is not good enough as there is no regular follow up like there is for a certified product.”

For its part Safe Work Australia says users should also exercise caution when it comes to the use of PPEs and RPDs, remembering that ongoing supervision is required to ensure the PPE is being used correctly. Cutforth says it is fair to say that the vast majority of companies involved in the construction site sector take workplace health and safety very seriously as “their reputations, workforces’ safety and livelihoods, and workplace productivity depend on it”. “Unfortunately, as in any industry, there are a small minority of rogue, or careless operators who look for shortcuts and who do not take the trouble to implement proper processes and procedures to protect their workers and stakeholders.” Currently an employer’s legal obligations, in relation to respiratory protection, for his or her workers are similar to those that relate to all workplace health and safety measures on construction sites.

1300.00EA

1449.00EA

$22.95/spl $30.50/pkt

$75.00/spl

$12.50/pkt

$21.95/spl

$29.00/pkt

$75.00/spl

$27.00/pkt

$75.00/spl

All prices include GST

Working smarter

WHICH TYPE OF MASK SHOULD I USE? MASK TYPE DESCRIPTION WHEN DO YOU USE IT? Disposable Mask

Combination Mask

Half Mask Respirator

A disposable respirator is a maintenance free, single shift, single use item. This means that when you put it on and start your shift and then take it off (for example a tea break), the shift is over and the mask should be replaced. The mask can be used for a maximum of an 8 hour shift.

When a maintenance free form of respiratory protection is required or preferred.

A device combining the filtration capabilities of gas/vapour and particulate filters.

When the filtration of multiple types of substances is required and are likely to be present in the environment in which you will be working.

A close fitting device to cover the nose, mouth and chin and can be secured in position by suitable means, such as a head strap. These are to be used with the appropriate Filter Cartridges.

When certain gases and vapours are required to be removed from the inhaled air.

How do I recognise the six forms of airborne hazards? Dust Formed by the breaking down of solid materials, normally when materials are altered. For example, sanding, cutting, grinding and brushing. In general, the smaller the dust particle, the greater the hazard that it presents. Fibres from materials should also be treated as dusts. Mist Formed by the processes that involve atomisation (such as spraying, cleaning and cutting/grinding using coolants) and consists of tiny liquid droplets rather like steam in a bathroom. Fumes Formed by the vapourisation of a solid material by the application of intense heat. Extremely fine particulates are formed as the fumes cool and condenses. Many processes form fumes, such as smelting, pouring metals and many welding applications. Vapour A gaseous state formed by evaporation from substances that are normally solid or liquid at room temperature. Generally released at room temperature (petrol, methylated spirits), many industrial processes used in degreasing vapourise particularly quickly once heated.

How to correctly fit a disposable mask

➊

Hold respirator in hand with moulded nose contour (narrow end) at fingertips. Allow head-straps to hang below hand.

➋

Place respirator against your face with the nose-piece on the bridge of your nose.

➌

Place the top strap high on the back of your head. Move the bottom strap over your head and position it below your ears.

➍

Use both hands to mould the nose-piece to the shape of your nose for a secure, comfortable fit.

➎

Test the fit. Cup both hands over the respirator and exhale strongly. If airflows around our nose, tighten the nose-piece. If air escapes around the edges, reposition the straps for a better fit.

Gas An air-like substance at room temperature. Gases can travel far, very quickly. Oxygen Deficiency/Enrichment When an atmosphere is likely to contain less than 18% oxygen (or where conditions may exist in the future for this to happen); and in certain circumstances where the risk may be oxygen enrichment, which can lead to explosion and severe impairment of operatives. Note: Monitoring devices should always be used to check oxygen levels of an unknown environment. Conventional dust masks are not suitable for oxygen deficient situations.

Working smarter “Employers need to know what their workers are being exposed to so they can provide the correct respirators to protect their employees.” Keith Wilmot, consultant, FitTick program

Each state may have specific regulations that need to be adhered to in addition to overarching national legislation. In Victoria, for example, occupational health and safety regulations for hazardous substances, lead, confined spaces and asbestos may apply for respiratory protection. To this end South Australian consultancy service Health Safety Environment Australia launched what it calls its FitTick certification, aimed at helping ensure clients in the construction sector manage their respiratory compliance issues. Keith Wilmot, a consultant with FitTick program, says worn and used correctly there is no doubt that respiratory masks help safeguard a workers health—providing they are

worn and used correctly. “I have tested masks in a few companies where they issued masks to their employees without first finding out what size they needed only to find that when we come in and conduct fit testing that the masks do not fit correctly.” Wilmot says best practice for any PPE is to ensure the right fit and fit testing of respirators is mandatory under the Australian Standards AS/NZ 1715:2009 concerned primarily with the selection use and maintenance of respiratory protective equipment. Testing to ensure that the respirators with a tight fitting face piece provide the adequate seal on the wearers face is the key outcome of the FitTick Program, he says. Upon completion of testing

employees are issued with a plastic FitTick Card that will identify the make, model and size of any PPE they have been tested for. The card can be carried around and presented when requested for entry onto site. “Employers need to know what their workers are being exposed to so they can provide the correct respirators to protect their employees. “Most companies provide the equipment required to conduct their daily tasks and more and more are coming to realise the importance of knowing if the respirators fit. Fit testing also gives the opportunity to provide refresher training of how to fit a face mask and what to look for to make sure a correct fit is achieved.” So if you need to make a purchase of any type of respiratory protection, CSS member stores nationally often stock, or have access to a range of products to meet your needs. Now that you’ve read the advice from the experts, make the right purchase decision either for yourself or your employee. 

Request your FREE software download NOW! www.iccons.com.au

AUSTRALIANMADE MADE AUSTRALIAN POWDER PRODUCTS POWDER PRODUCTS SikaGrout GP20kg 20kg SikaGrout GP General non-shrink Class A Grout General Purpose, Purpose, 54 54 MPaMPa non-shrink Class A Grout SikaGrout 212HP 20kg SikaGrout 212HP 20kg High performance and high flow, 75MPa non-shrink Class C Grout High performance and high flow, 75MPa non-shrink SikaGrout 100 20kg Class C Grout High strength, 90MPa non-shrink Class C Grout

SikaGrout 100 20kg SikaGrout 300PT 20kg High strength, 90MPa non-shrink C Groutstructures High performance, zero aggregate grout forClass post tensioned SikaGrout Deep Pour20kg 20kg SikaGrout 300PT Deep pour grout, up to 500mm thickness, 60MPa High performance, zero aggregate grout for post tensioned structures SikaGrout HES 20kg High early strength grout, reaches 20MPA @ 2hours

SikaGrout Deep Pour 20kg SikaGrout Ultra 20kg Deep pour grout, up to 500mm thickness, 60MPa Ultra high strength, 100MPa non-shrink grout

SikaGrout HES 20kg SikaGrout UW 20kg High early strength grout, reaches 20MPA @ 2hours Cementitious, non-shrink grout for underwater applications, 75MPa SikaGrout Ultra 20kg Ultra high strength, 100MPa non-shrink grout SikaGrout UW 20kg Cementitious, non-shrink grout for underwater applications, 75MPa

Sika Australia proudly manufacture wide Sika Australia proudly manufacture a widearange of range of powderpowder products from plants in NSW, QLD and newly products from plants in NSW, QLD and newly in Victoria. in Victoria.

a wide range grouts for of applications, With aWith wide range ofofgrouts fora range a range of applications, you can be sure that Sika Australia will have the solution you can be sure that Sika Australia will have the solution your construction needs at stage of the to yourtoconstruction needs atevery every stage ofproject. the project. With Sika Grouts having been used recently on the

With Sika Groutsof having beeninused refurbishment Skilled Stadium Victoria,recently and the on the refurbishment ofinSkilled in Victoria, ANZAC Bridge NSW, youStadium know that these grouts and the ANZACareBridge NSW, you know that these tried and in tested, and approved for use on some of grouts are tried and tested, and approved for use on some of Australias biggest landmarks. Australias biggest landmarks. For more information on these products, call your local CSS member for an obligation free quote.

For more information on these products, visit aus.sika.com or call your local CSS member for an obligation free quote.

NEW!

18V DBX 2-P EC 6.0Ah Kit Includes: - 18V Brushless Destroyer - 18V Brushless Impact Driver/Wrench - 2 x 18V 6.0Ah Batteries - 18V Fast Charger - L-Boxx Part Number: 0.615.990.HC2

$649.00

BOSCH INNOVATION Now available in both Bosch Blue Professional Heavy Duty Series and Dynamic Series Drills, KICKBACK CONTROL stops further rotation if the tool gets jammed – providing professionals with ultimate control at the same time preventing any injuries.

18V 4PC Heavy Duty Combo Kit Includes: - 18V Hammer Drill - 18V Impact Driver/Wrench - 18V 5” Angle Grinder - 18V Circular Saw - 2 x 18V 4.0Ah Batteries - 18V Fast Charger - Large Tool Bag Part Number: 0.615.990.HC0

$699.00 750W 5” Angle Grinder

3-Mode Compact Rotary Hammer

- 125mm Disc Diameter - Great control and easy handling - Improved motor cooling - High overload capability - High removal rate

- Includes 4 piece drill set + chisel - SDS-Plus tool holder - Rotation stop for chiseling - Quick Change Chuck - Overload clutch protection

Part Number: 0.601.394.041

Part Number: 0.611.24A.042

$89.00

$399.00 *All Prices Inc GST

SIZES & APPLICATIONS

SMALL

ET N O G R A C SAFETY FEATURES

SIZE

NET SIZE

NETSYS1

SMALL

2460 x 2460

NETSYS2 MEDIUM

2800 x 2840

NETSYS3

2800 x 3440

LARGE

SIZES MM

COMPLIANCE MATRIX MEDIUM

d UV Stabilise

provide g positions in b b e w r la Modu er size plications p multiple ap own ist holding d s s a to s g n ri Integrated D le tie downs & cam buck s e p ro e ti / Complete w ity ater flexibil loops for gre g in b b e w Multiple long life y mesh for High tenacit lets rimeter eye Multiple pe d restraint ected to loa Easily conn e downs compliant ti

CODE

LARGE

LOAD TESTED TO *

All states in Australia have regulations for covering loads with penalties being enforced Beaver’s Safety Cargo Net is load tested to 1000kg Beaver’s Safety Cargo Net is easily connected to an AS/NZS 4380 compliant load restraint system with the addition of the simple RTD kit nominated NOTE: NETTING SYSTEMS ALONE ARE NOT COMPLIANT WITH AS/NZS 4380 Price from

$245 inc GST

1000kg

ALL NETS INCLUDE: 4x Rope ties & 4x Cam buckle tie downs

FM10_Beaver Brands_CargoNET.indd 1

4/05/2016 2:17 PM

W C E N DU O R

Your partner in construction and preventative maintenance products

Lano-Form™ Premixed, ready to use concrete release agent

 Non Flammable / Non Dangerous Goods  Non Hazardous  For environmentally sensitive areas  Superior finish • Extends the life of timber and metal moulds • Compatible with most coating systems • Safe on rubbers and polystyrene • For formwork, precast and tilt panel Also available in 200L, contact your CSS member for pricing

20 Litre

$132

.00 incl. gst

Part No.: RA\LF-0020 Coverage: Approx 500m²

Working Smarter: Hearing Problems

If you work in construction there is a good chance you could suffer serious hearing problems. Here’s how to avoid them.

Lend me your ears

onstruction workers are in one the professions most exposed to serious hearing injury. As an everyday part of their job they are exposed to six times the legal noise level limit. Over 75 per cent of construction workers develop serious hearing and communication problems— and little is being done to seriously address the problem. How then does a construction worker protect his or herself from such an occupational hazard? In 2015 Safe Work Australia data showed that eight per cent of building site workers are not provided with any noise control measure. That means it’s largely up to the individual to protect their hearing. The obvious solution is to use either

or both earmuffs and earplugs, known to hearing professionals as Personal Protection Equipment (PPE). Researchers claim that over half the time, hearing protection is improperly worn and so does not provide adequate protection. Taking them off for even an hour a day can lessen their effectiveness by up to a third. Choosing the best form of PPE is largely up to the individual. Warwick Williams, a Senior Research Engineer with the Department of Health (Office of Hearing services) believes there’s no real distinction between plugs and muffs. “You can get the same amount of protection as long as you use them properly,” he explains. “In fact, with earplugs properly inserted you actually get better attenuation than you

do with most earmuffs. But if they’re uncomfortable get something else. If you’re being exposed to loud noise from a ripsaw or something the exposure threshold is reached in a very short time, so you’re better off wearing something you can tolerate.” On the other hand, if the noises you’re working with are stop-start, earmuffs are probably better for you, so you won’t be removing and re-inserting earplugs all the time and being tempted not to bother. The important thing is to know and be aware of the potential for hearing damage in your environment. “If you’ve gotta start raising your voice to carry on a conversation, then you really need some kind of hearing protection,” says Williams. “If you Construction Supply Specialists

Working Smarter: Hearing Problems

“If you’ve gotta start raising your voice to carry on a conversation, then you really need some kind of hearing protection.”

think it’s loud then it probably is and something needs to be done about it.” When it’s too loud on site Continual exposure to noise levels of over 90decibels, which can be that put out by a lawn mower or an electric drill, can trigger hearing damage. Nail guns or rivet hammers go off at levels of up to 130 dB, and that’s in the extreme danger area. If you’re not wearing ear protection at that point, you’re in trouble. The injury can come from a one off ‘pulse’, such as an explosion, or the continuous action of machinery. It doesn’t have to be painful—again, if you have to raise your voice to be heard, you’re probably sustaining damage. That’s when the stereocilia, the tiny hair cells inside your cochlea, are no longer able to detect and send sound signals to the brain. The biggest problem on site Research has shown that one of

Warwick Williams, Dept. of Health

the biggest factors in this problem has been the aversion of workers to wearing hearing protection. Whether it’s seen as an inconvenience or a weakness, construction professionals simply aren’t putting on earmuffs or inserting earplugs, and they’re paying a heavy price for it. Another factor is the perception that your alertness to danger is hampered by ear protection. But the fact is that if you can’t hear well enough to be safe then you’ve already sustained serious damage and it’s only

going to get worse without protection. If conditions are dangerously loud, you also need to be talking to your bosses. Engineering solutions can be implemented to manage noise. Warwick Williams says proper protection will help in this regard too. “With most good hearing protectors nowadays—and ‘good’ doesn’t mean they have to be expensive—they’ll often let you hear better, because of the way hearing works. Most people on sites will have some high noise hearing damage and if you can bring that high end down into the low noise area with protection you’ll be able to distinguish sounds better, making you safer. If someone is in the room with a rattlegun or something going and you don’t have to be there, don’t be there. PPE is the last cab off the rank for hearing protection.” What to use Harry Baume, a PPE specialist from Frontier Safety, a brand that all CSS

$99.00 504025 All prices include GST

TRADIE ROOFERS KIT

$209.00

■ 140kg rated ■ Fall Arrest Harness ■ Rope Safety Line - 15m Kernmantle Rope fitted with twist lock karabiner at one end and BSM0012 - manual rope adjuster ■ Attachment strap - 25mm web rated for 1 Person ■ Tear Webbing Shock Absorber with loops each end ■ Alloy Steel Twist Lock Karabiner x 3 ■ TRADIE Back Pack

BK061215TRAD

HANDI-PRO 250KG LEVER BLOCK ■ ■ ■ ■ ■

Complies to AS1418.2 Compact, lightweight rugged design All weather rubber safety grip handle Rated Capacity 250kg 1 metre lift

$135.00 500103M

3G CHAIN BLOCK 1 TONNE CAPACITY COWGRAIN RIGGER GLOVE ■ B grade grey/white cow grain ■ Wing thumb allows better open hand pulling and grabbing ■ Elasticized wrist ■ 250mm length ■ Sizes: S-2XL P03RW

$5.50

■ Complies to AS1418.2 ■ Beaver 3G Industrial chain blocks are colour coded to match international lifting standards ■ The load chain is made of high resistance Grade 80 Alloy Steel ■ The top and bottom hooks come with cast/heavy duty latches ■ Top and bottom hooks fitted with ball bearings to allow rotation under load

NT65MA4(H2)

CN16SA

G23UB2

65mm DA Series Finish Nailer

400W, 1.6mm Nibbler

• Dual function trigger for single fire & bump fire • Tool-less depth dial for flush, proud or deep driving • 360 degree adjustable exhaust directs air away from user

• Lockable slide switch for user comfort • 3 positive stop die holder permits straight, right and left cutting • Lightweight and compact featuring a small grip circumference for user comfort

2400W, 230mm, Angle Grinder with Soft Start

• ‘Deadman’ switch for user safety • Shaft lock button for easy wheel change • Three position anti-vibration handle for easy operation and user flexibility

GREAT IN-STORE PRICE!

24900

Ex. GST

Inc. GST

25000

Ex. GST

Inc. GST

KC18DDL(HA)

KC18DGDL(HA)

2 Piece 18V Slide Brushless Combination Pack

3 Piece 18V Slide Combination Pack $

• DV18DBL2 brushless impact (hammer) driver drill • WH18DDL brushless IP56 impact driver • 2 x 6.0Ah li-ion slide batteries • Rapid charger with cooling & USB port • Stackable carry case III

699

• DV18DSDL impact (hammer) driver drill • WH18DSDL impact driver • G18DSL 125mm angle grinder • 2 x 6.0Ah slide li-ion batteries • Rapid charger with cooling & usb port • Large site bag

Ex. GST

Inc. GST

EXTREME HIGH CAPACITY

74500

Ex. GST

Inc. GST

EXTREME HIGH CAPACITY

N18DSL(H4)

18V Slide Stapler (Naked) • Tool-less depth dial for flush, proud or deep driving • Anti-blank firing mechanism for added safety • Capable of stapling approx. 8,000 staples per charge when using the 4.0Ah BSL1840 battery for increased runtime

37800

Ex. GST

Inc. GST

N18DSL Staples Item number 750667

Thickness Width (mm) (mm) 0.7

12.8

Length (mm) 6

Box Quantity

WR18DBDL(H4)

G18DBAL(H5)

18V Slide Brushless Impact Wrench (Naked)

18V Slide Brushless 125mm Angle Grinder with Paddle Switch (Naked)

• 4 speed rotational selector • The impact rate changeover mechanism enables the user to select between the single and continuous mode. • Electronic switches are more efficient in transferring energy resulting in longer battery and tool life

• Auto mode conserves energy by reducing rpm • Constant speed control maintains the speed under load • Anti-Kickback & overload protection

GREAT IN-STORE PRICE!

Inc. GST

Barcode

4,800

8717574041293

750668

0.7

12.8

4,800

8717574041309

750669

0.7

12.8

4,800

8717574041316

27500

Ex. GST

Inc. GST

All prices include GST

hitachipowertools.com.au

Working Smarter: Hearing Problems

“Unfortunately, hearing damage and loss creeps up by small increments and most people don’t realise they’re experiencing loss.” Harry Baume, Frontier Safety

member stores stock, agrees that the choice of plugs or muffs largely comes down to personal preference. “Some people don’t like sticking things in their ear canals. Having said that, the scientific consensus seems to be that you get better attenuation from foam earplugs as they seal the ear canal directly, whereas muffs just seal around the periphery of the ear. Earmuffs may be too intrusive when wearing head or eye protection, whereas plugs are on the whole disposable and can be a hygiene

risk if overused or dirty. The unit cost of earplugs is much cheaper than an earmuff, but without time and motion detail, it’s difficult to say what’s most cost effective in the long run.” Certainly he suggests a high quality muff, such as a Beaver MG5 30DB Safety Earmuff, will provide robust protection against high noise use and is a comfortable wear. That’s going to guarantee industrial protection—as long as you keep them on. However, Baume notes how this is often too little, too late. “Unfortunately, hearing damage and loss creeps up by small increments and most people don’t realise they’re experiencing loss.” CSS member stores stock the leading brands of hearing protection like Frontier and Beaver brands. With a number of product choices made available to you, together with the right advice, makes your purchase decision a lot easier. Don’t wait until it’s too late, invest in your safety today. 

$1.80 $2.50 $2.70 $6.50

$6.80

$15.00 All prices include GST

each

$1.70 $1.70 $1.70 $5.00

All prices include GST

Cordless Twin Pack SB 18 LTX BL SSD 18 6.2Ah AU68901350A 90 Nm Brushless Hammer Drill + 150Nm Impact Driver • 2 x 6.2 Amp Hour Batteries • ASC 30-36v Charger • Carry Case

Cordless Site Light 602111850 Cordless Heated Jacket HJA 14.4 – 18

$689

Sizes L - XXXL

$199

BSA 14.4 – 18 LED • Upto 8 hours illumination with 5.2Ah batteries.

$229

Table Saw TS 254 600668190 • 2000w, ø254mm • 4,200 rpm • Max. Cut depth 90º/45º - 87/50mm • Max rip cut 630mm • Soft start • Overload and restart protection • Brake • Tool less adjustment of riving knife

$1049

S BONU

Includes Paddle $399

125mm Angle Grinder WE 15-125 Q 600448190 Impact Drill

• 1550w, 125mm

Stirrer / Mixer

SBE 751 600863530

• Marathon Motor

RWE 1020 614044190

• 750w

• Safety clutch

• 1020 watt

• Variable Speed 0 -1,000 / 0-3,100 RPM

• Quick Nut

• 0-700 rpm

• Safety Clutch - prevents kickback

• TC electronics

• Splash proof motor cover

• 13mm metal keyless chuck

• Soft Start

• BONUS KM321 Sortimo Case

$269

$349

• Restart protection

• Electronic soft start • Ergonomic handle design for easy and safe working

Long Neck Dry Wall Sander

• Includes mixing paddle

LSV 5-225 Comfort 600136000 • 500w ø225mm • Length: 1.1 / 1.6 / 2.1m* • Variable Speed control 1,000-1,600 rpm

Adjustable Length

• Internal dust extraction • Easy driveshaft change • Intergrated LED light system

$949

• Spring mounted brush ring for optimised dust extraction

Wet & Dry Vac

*Attachment for 2.1m setting not included as standard. Available as an accessory.

ASR 35 L ACP 602057190 • 1400w, 35 litres

$319

Wet & Dry Vac

• 248hpa (mbar)

ASA 32 L 602013190

• filter surface 8,600cm2

• 1200w, 32 litres

• 2 Strong/Washable M-class filters

• 200hpa (mbar)

• Power socket with auto start

• Socket with Auto start

• Automatic shut-off

• Air Output: 4200 (L/min)

• Soft Start

• Filter surface 3,600cm2

• Auto filter cleaning mode

• Noise Pressure: 75db(A) • 3.2m x ø35mm hose

It‘s The 50 year anniversary of Metabo‘s S-Automatic Mechanical Safety Clutch

$899

• Auto Trailing • 3.2m x ø35mm hose

High Wind

Seismic

Engineered Wood

The wait is over. Now in Stock and on Jobsites

Simpson Strong-Tie is on the job where you are with a growing range of Timber Connectors, Fastening Systems and Anchoring Fixings for commercial and residential construction. Wherever your next job takes you, take Simpson Strong-Tie. Call your local CSS member today - Visit www.constructionsupply.com.au ÂŠ 2015 Simpson Strong-Tie Company Inc. SSTM-CSSFMQ2-2016

COMBO SPANNER SET

EACH

KEY WRENCH SETS $

1299

GREAT VALUE!

CONTOUR CHEST KIT

9 Piece Imperial

PART NO. K5042

9 Piece Metric

PART NO. K5043

9 Piece Tamperproof

PART NO. K5044

9 Piece Torx

PART NO. K5009

23900

GREAT VALUE!

30 Piece Metric/Imperial • Chrome Vanadium Steel Mirror Polished Finish • Metric Sizes : 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm • Imperial Sizes: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”

PART NO. K3030

207 Piece 8 Drawer

• Mirror Polish Socket & Accessories, 1/4", 3/8" & 1/2" Drive • Mirror Polish Spanners • Ball Pein Hammer Hickory Shaft & more... • Measurements: 745 x 475 x 485mm

PART NO. K1509

$ $

269

GREAT VALUE!

MULTI FUNCTION JUMP START

600A Power Pak Plus • Jump start most vehicles requiring up to 600CCA

(4 - 8 cyl Petrol & diesel vehicles, motorcycles, marine & outdoor equipment)

• Charge electronic products: MP3s, cameras, laptop computers, tablets & mobile phones

24900

NUT RIVETER TWIN HANDLE

GREAT VALUE!

68 Piece • Two hand operation • Heavy duty aluminium & steel construction • Moulded grips • 6 x mandrels (M3, M4, M5, M6, M8, M10) • Includes 60 zinc coated steel rivet nut inserts (10 of each size) • Mandrel spanner • Blow mould case

1/2 DRIVE LOK-ON SOCKET SET 40 Piece • 18 Metric: 8 - 32mm • 15 Imperial: 3/8 -1.1/4” • Spark Plug Socket & Extensions • Universal Joint • Flex Handle • Ratchet Handle

PART NO. KP1404

13900

GREAT VALUE!

PART NO. K2042

PART NO. K4900

ALL PRICES INCLUDE GST FM10_Kincrome FA.indd 1

3/05/2016 4:54 PM

NORTON ESSENTIAL Turbo Diamond Blades

NORTON ESSENTIAL Diamond Cup Grinders

• Trade quality • Fast, smooth cutting of concrete, slate bricks, pavers, terracotta tiles, bluestone, granite & natural stone

Product Code 70184601092 70184601093 70184601090 70184601083 70184601091

Description 105 x 20/16mm Turbo Blade 115 x 22/20mm Turbo Blade 125 x 22/20mm Turbo Blade 180 x 25.4/22mm Turbo Blade 230 x 25.4/22mm Turbo Blade

• Trade quality • For grinding and re-surfacing of natural stone, concrete and bricks • Ideal for removal of coatings such as paint, epoxy and glues Price Inc GST

$7.50 $10.00 $12.00 $25.00 $33.00

NORTON 4x4 EXPLORER+ Segmented Diamond Blades

70184646571 70184646154 70184647348

Description 350 x 20mm Segmented Blade 350 x 25.4mm Segmented Blade 400 x 25.4mm Segmented Blade

Description

Price Inc GST

70184601161 70184601163 70184601165 70184601162 70184601164 70184601166

100 x 5 x 8 x 22/16mm Single Row 125 x 5 x 8 x 22mm Single Row 180 x 5 x 8 x 22mm Single Row 100 x 5 x 8 x 22/16mm Double Row 125 x 5 x 8 x 22mm Double Row 180 x 5 x 8 x 22mm Double Row

$39.00 $55.00 $69.00 $59.00 $75.00 $99.00

NORTON BEAR PVC Duct Tape

• Cuts all common building materials including steel • Infiltrated blade technology • Laser welded Product Code

Product Code

• General Purpose • 1000’s of uses • A must for any tradesmans toolbox Price Inc GST

Product Code Product Code

$349.00 $339.00 $429.00

63642548313

Description 48mm x 30 metre (box of 36 Rolls)

Price Inc GST

$3.50

All prices include GST Norton, Norton Essential, Norton 4x4 Explorer+ and Bear are registered trademarks of Saint-Gobain Abrasives Pty. Ltd.

BUY A STARTER KIT EZ STRAPPING KIT

Kit includes: - 1 x 62.5m x 20mm coil - 1 box of heavy duty buckles (100) - 1 x ratchet tensioner - 1 x tool box - Instruction sheet - Manual tensioner This self contained strapping system weighs only 8kg and packs the power of steel strapping but with the portability of a lunch box. Safely strap up job site materials for transport with nearly 1000kg of breaking strength.

OR PURCHASE INDIVIDUALLY EZ STRAPPING REPLACEMENT ROLLS

EZ STRAPPING BUCKLES

- Coil weighs 1/4 the weight of steel strap coils - Will not rust, stain or damage product - No sharp edges - Can be cut while under tension Length Code EZS20/62 20mm X 62.5m rolls EZS20/250 20mm X 250m rolls EZS20/500 20mm X 500m rolls

EZ STRAPPING DISPENSER Dispensing machine holds up to 500mtr coil. Spring loaded to hold strapping firm to stop recoil. Heavy duty frame with roller bearing rubber wheels. Storage container attached to hold buckles and tools. Code: 11061

- 20mm Phosphate - coated buckles - Available in a box of 1000 or bags of 100 - Buckles are reusable - Rust resistant Length Code EZB/20C Box of 100 Buckles EZB/20M Box of 1000 Buckles

EZ STRAPPING DISPENSER

EZ STRAPPING MANUAL TENSIONER

- Tensioner to be used on 20mm strapping - Best suitable on flat surfaces

Best used to leverage off edges.

Code: 10035

Code: 10033

Tax time tips

New rules around 4 salary packaging Providing non-cash benefits to your employees can leave you with a steep tax bill. Here’s what you need to know about new changes to fringe benefits tax.

ew changes to fringe benefits tax (FBT) legislation from 1 April 2016 have thrown many trade businesses into a tax-time tailspin. But making sense of the new rules doesn’t have to be mission impossible. Principal among the changes are new exemptions on providing portable electronic devices to your employees, a new cap on meal and entertainment exemptions, and renewed focus on the private use of cars and the payment of living away from home allowances. “FBT will apply if you give an employee or associate a benefit that isn’t in cash,” explains Alexander Gallimore, law clerk at Butlers Business and Law. “This includes things like meal entertainment, paying for accommodation, or providing a car or electronic device.” And it pays to keep a close eye on your FBT liabilities, with rate hikes also kicking in from 1 April this year. “The actual FBT rate has changed this year too,” says David McKellar,

director of Allied Business Accountants. “It’s based on the top marginal rate, so it has gone up two per cent—from 47 to 49 per cent—to reflect the new budget repair levy.” Employee or contractor? FBT generally only applies to employees, not contractors. However, the Australian Taxation Office (ATO) will look closely at your employment arrangements to assess exactly how contractors are utilised in your business. “The ATO will look at how much control the principal has over the contractor,” explains Gallimore. “That is, do you hold them out as a representative of your organisation, or are they truly independent? Are they exclusively working for you? “If you dictate exactly how the contractor should achieve a job, then that’s more a hallmark of an employment relationship. But if the contractor just turns up to work on that one job, and their pay is calculated on finishing that one job and nothing else, then

that’s more a hallmark of a contractor relationship and they’ll likely be exempt from FBT.” Portable electronic devices An important change to FBT rules involves the provision of portable electronic devices—such as smart phones, tablets and laptops—to employees. Previously, small businesses could provide a single portable electronic device without incurring FBT. However, that exemption has now been extended to two portable devices. “And that stands even where those devices are of a similar nature,” says Gallimore. “So you could provide two smart phones to an employee without incurring an FBT liability. “Even though your employee may only use one smart phone, the FBT rules extend to associates of employees, such as a spouse or child,” says Gallimore. “So it might be the case that you can pick up a second FBT-exempt phone, laptop or tablet for an associate of the employee without any additional cost. That could be a good incentive to bundle into their salary.” Meal and entertainment benefits You’ll also need to pay FBT on any meal or entertainment benefits you provide to employees as a reward, or as part of entertaining clients. New rules have capped exempt meal or entertainment benefits to $5,000 per year. This won’t necessarily affect trade businesses, however the new exemption cap does extend to trade unions. “The only time it may need to be taken into consideration is that FBTexempt entities do extend to trade unions,” explains Gallimore. “Keep a clear record of everything you’ve spent on meal entertainment for your employees and non-employees because that will be useful in determining what proportion relates to employees and what proportion doesn’t, which can potentially bring your FBT liability down.” Cars for private use If you make a car available for the private use of an employee, you’ll likely be required to pay FBT on the usage Construction Supply Specialists

Tax time tips “The actual FBT rate has changed this year too. It has gone up two percent—from 47 to 49 per cent.” David McKellar, director of Allied Business Accountants

and value of that car—unless it has a carrying capacity greater than one tonne, in which case it may be exempt from FBT. Keep in mind that the ATO will consider that a car is available for private use whenever it is not stored at the business premises. And even where the employee doesn’t have permission to the use the car for private use—if they do so—the employer can still be stung for FBT. “This is something the ATO looks at pretty closely,” says Gallimore. “If a trade business owns a car and makes the car available for the private use of an employee—which can be anything from driving it around on the weekend to travelling from home to work—then the value of that travel and the value of the usage of that car will be considered a fringe benefit.”

“The message to tradies is that any vehicle with a carrying capacity greater than one tonne will continue be exempt from FBT,” says McKellar. “Salary packaging these vehicles can help to reduce employees’ income tax liability.” Living away from home allowance Allowances you pay to your employees to cover expenses generated from the need to temporarily live away from their normal place of residence in order to perform their employment duties generally incur FBT. While there are no new rules in this area, the ATO pays particular attention to the difference between paying your employees a living away from home allowance versus paying for their travel expenses. “There’s always a distinction between

an employer reimbursing an employee for their travel, and money that is paid to compensate an employee for living away from home in connection with their job,” explains Gallimore. “Travel expenses are generally taxed as an expenditure in the employee’s income tax return, however a living away from home allowance is a fringe benefit amount. Understanding the difference really shifts the burden of where that tax liability sits and who has to report it.” “It depends on whether you’re asking the employee to stay away from home for a defined period to work on a job site, versus doing a bit of adhoc travel two or three times a year,” says Gallimore. “It’s always important to characterise those allowances appropriately because the ATO is famous for litigating on that point.” 

Imex 66R Rotating Laser Level Set

Imex LX25P Crossliner NEW 5 Spot Laser

MODEL

Imex LX22 Set Crossliner

439

• 1 horizontal, 1 vertical line 012-LX25P • Hyper bright beams • Heavy duty magnetic bracket • 1 horizontal, 1 vertical line • Elevating tripod • Plumb up plumb down, 3 @ 900 • Heavy duty magnetic bracket $ • Best in class hyper bright beams/dots

299

012-LX22S

1099

• 400m dia range 012-I066RS • Dual faced receiver • Dual batteries, alkaline & rechargable • Includes tripod & staff • Calibration certificate

Imex 99DG Auto Dual Grade-Rotating Red Beam Laser Imex Digital Levels Imex R1000 Measuring Wheel • Professional trades • 10,000m range • Easy fold up • Canvas carry bag

149

003-R1000

• 600m dia range • Digital dial in grade to10% • Horizontal/Vertical • Dual Batteries Alkaline & rechargeable • Dual face receiver • Includes tripod & 5m staff • Calibration certificate

2365

012-I099DGS

• Measure angles in %, 0 or mm/m • Hold measurement • Padded bag

600mm

139

002-EL60

1200mm

165

002-EL120

All prices include GST

....The Smart Choice For Fire Rated Sealant Solutions

FIRE RATED EXPANDA FOAM FIRE RETARDANT UP TO 4 HOURS VERY HIGH YIELD LOW POST EXPANSION ONE COMPONENT READY TO USE

FIRECAULK & FIREBAN ONE UP TO 4 HOURS FIRE PROTECTION SEALING OF ELECTRICAL CABLES FOR FIRE RATED MORTARS

APPRENTICE-ONLY DEALS* 260-PIECE TOP CHEST KIT

199-PIECE

FOAMED TOP CHEST KIT

SCMT10137 - 6-Drawer Tool Kit Contains: Sockets & Accessories • Ring & Open-End Spanners • Hex Keys • Screwdrivers • Pliers • 21-Piece Ratchet Screwdriver Set • Adjustable Wrench • Anti-Vibe Ball Pein Hammer • 43-Piece Mechanics Bit Set

SCMT10118 - 10-Drawer Tool Kit Contains: Sockets & Accessories • Drive-In Hex Socket Set • Flare Nut Spanners • Geared Wrenches • Ring Spanners • Open-End Spanners • Hex Keys • Screwdrivers

$ 2499 Inc GST

$ 1499 Inc GST

APPRENTICE BONUS 7-DRAWER ROLL CAB

APPRENTICE BONUS 5-DRAWER ROLL CAB

Valued at

529

449

Inc GST

SCMT50207

SCMT50215

112-PIECE CANTILEVER KIT SCMT10138 - 5-Tray Cantilever Tool Box Contains: • Sockets & Accessories • Ring & Open-End Metric Spanners • Ring & Open-End AF Spanners • Screwdrivers • Hex Keys

APPRENTICE BONUS SLIMLINE CORDLESS INSPECTION LIGHT Valued at

199

Inc GST

$ 499 Inc GST 101-PIECE TOP CHEST KIT SCMT10117 - 6-Drawer Tool Kit Contains: Sockets & Accessories • Ring & Open-End Spanners • Flare Nut Spanners • Screwdrivers • 16-Piece Ratcheting Screwdriver Set • Pliers • Hex Keys

Metric Only Kit

364-PIECE

WIDE BODY ROLL CAB KIT

SCMT10146 - 13-Drawer Tool Kit Contains: Sockets & Accessories • Drive-In Hex Socket Set • Ring Spanners • Opend-End Spanners • Ring & Open-End Spanners • Flare Nut Spanners • Geared Wrenches • Flex-Head Geared Wrenches • Screwdrivers • Hex Keys • Punches & Chisels • Pliers • Adjustable Wrenches

$ 999 Inc GST APPRENTICE BONUS 3-TIER HEAVY DUTY TROLLEY

Valued at

$ 3999 Inc GST APPRENTICE BONUS 8-DRAWER WIDE BODY TOP CHEST

Valued at

299

695

Inc GST

SCMT50350 *APPRENTICE BONUSES VIA REDEMPTION

SCMT50218

Advertorial

STANLEY® Smart Measure Pro Delivering professional estimates in minutes The new Smart Measure Pro from STANLEY® is an innovative, timesaving digital measuring device that can capture the height, width and area of targeted locations from pictures taken on a smart phone – generating quick and accurate estimates, ideal for builders and contractors, plasterers, painters and roofers. After connecting a smart phone to the Smart Measure Pro via the Smart Measure Pro App, the user simply takes a picture of the required surface area, and the intelligent digital device allows the user to obtain measurements accurate up to ± 2mm. It is also possible

to review, store and share the same measurements and estimations to a desktop device. Connectivity via Bluetooth ensures the phone, tool and application work seamlessly, with the camera and Smart Measure Pro communicating with the help of an invisible, embedded laser. The laser measurer wirelessly syncs with the application to generate accurate measurements in real time, and stores them automatically in the app’s database. This provides users with the convenience of viewing the measurements immediately or storing them to review at a later time.

The STANLEY Smart Measure Pro can be used with tablets and iPhones, and is compatible with both Apple and Android devices. The Smart Measure Pro application can be downloaded free of charge, although some features may require subscription or in-app purchase. Files can be exported in JPG and PDF format. The Smart Measure Pro is powered by an internal lithium-ion battery and is equipped with a standard USB cable for charging. Available in store from July 2016. Visit www.stanleytools.com.au for more information.

NEW

SMART MEASURE PRO™ Laser Distance Measuring device (LDM)

Can be physically attached to a smartphone or tablet to provide measurements (length, height, area, etc.) from a photo. Accurate to +/- 2mm. • Indoor/Outdoor Use - Working Range of 1.8 - 137 metres. Easily snap measurements in a safe, time-efficient manner. Adjustable Bracket • Material Estimator - Perfect for estimating materials needed to help to fit a wide variety prepare and plan for various projects. of Smartphones • Compatibility - iOS 8.0 or newer / Android 4.4 with Bluetooth. • Connectivity - Bluetooth connection to Smartphones. • Share - Export and share as PDF or JPG files or upload to Cloud.

Laser Receiving Lens helps calculate dimensions

$19900 each

Inc GST

*Stock due July 2016

STANLEY FATMAX PRO TRIPLE LEVEL PACK • Rock-solid box beam construction is up to 5 times stronger than other STANLEY levels • Vials magnified by 20% for improved all-around accuracy • Solid black vials - best in class accuracy in 8 orientations of +/- 0.5mm/m

Push-Button Bracket Release

NEW

BONUS BAG Available at:

$14995 each set

STHT1-77366

Inc GST

600mm XTHT0-43119

1200mm

1800mm

46 185mm Standard Code: 29-701

$2250

BLACK PANTHER.

200mm Long Cut Code: 29-700

SNIPS WITH BITE.

$2650

• Comfort grip ergonomically designed handles • Stainless Steel serrated edge blades for increased cutting capacity • Ideal for multiple applications from thin wire to Kevlar® • Ideal knife replacement tool

Fast cutting in both directions with Triple edge grinding Easy job starting with Triple point tip Code: 50-660 50

• • •

$10

T-REX 22" HARDPOINT HANDSAW • 550mm (22") 8TPI handsaw with triple

ground shark point teeth for fast cuts even in hardwood Ideal for: timber, laminated boards, plastic pipe, plasterboard, cornices etc Code: 50-770 50

Cutting Capacity - 50mm Long - 40mm Thick Graduated base plate for accurate angle cuts Ideal for cutting PVC, concreting fillet, and small timber moldings Code: 3104N

$5250

UNIVERSAL SHEARS WITH ORANGE HANDLE • •

For cutting carpet gripper and small PVC and timber mouldings 35mm dia Cutting Capacity

Code: 1105

ENGLAND • MA DE

E IN AD

IN ENGLAN ADE D• •M M

SPZ100210

10.0 x 210mm

$16.00

$10.50

SPZ120160

12.0 x 160mm

$16.00

SPZ060160

6.0 x 160mm

$11.00

SPZ120210

12.0 x 210mm

$19.00

SPZ060210

6.0 x 210mm

$14.50

SPZ160260

16.0 x 260mm

$55.50

SPZ065110

6.5 x 110mm

$13.00

SPZ180250

18.0 x 250mm

$65.00

SPZ065160

6.5 x 160mm

$13.00

SPZ200250

20.0 x 250mm

$65.00

SPZ080160

8.0 x 160mm

$13.00

EUROPE • M AD E

ALL Alpha SDS Bits carry the PGM Mark. • Tested and certified in Germany • Guaranteed Hole Accuracy • Guaranteed Quality Assurance Don’t risk anchor failure – use Alpha PGM certified SDS Drills. PGM is a registered trademark of Prüfgemeinschaft Mauerbohrer e.V.

All prices inc GST

$11.50

6.0 x 110mm

UROPE • MA DE IN E I DE

5.5 x 160mm

SPZ060110

E IN AD

SPZ055160

PGM MARK M

$14.50

DE IN EUROPE MA •

$14.75

10.0 x 160mm

E•

8.0 x 210mm

SPZ100160

EUROPE DE IN •M MA A

SPZ080210

$11.50

MADE IN

EUROPE •

$10.50

5.0 x 110mm 5.0 x 160mm

N ENGLAND DE I •M MA A

SPZ050110 SPZ050160

EUROPE

E • MADE IN ROP EU EU R MADE IN EURO PE

PRICE

E• OP

SIZE

MADE IN ENGL AN D

OPE • MADE

IN EU Four symmetrically functioningIN EUR spiral ridges ENSURE LOW, UNIFORM FLUTE WEAR MADE IN

• ND LA

MADE IN EN GL AN

CODE

One piece, self centering SOLID CARBIDE TIP

$6900

MADE IN EU RO P

PRICE

MADE IN

ENGLAND

5pce SDS ZENTRO Drill Set (5,6,6.5,8,10mm) Code: SPZSET-5

• PE RO

SIZE

D• AN GL

CODE

MADE IN

ND • MADE IN EN GLA G EN

5PCE ZENTRO SET

• Unique and superior Zentro 4 cutter head, combines an intelligent, innovative geometry with uncompromising quality in its detail. Providing prolonged durability, precision drill holes and exceptional low vibration - even when the going gets tough

4 cutter head PREVENTS SEIZING when drilling reinforcing steel

ND • MADE I GLA NE EN N

ENGLAND

SDS ZENTRO

The Zentro “NO CLOG” design has the quickest waste ejection

AND • M AD ENGL IN EI N DE

$4500

$13

•

$3700

GREEN HANDLE DUCK BILL SHEARS •

T-REX 6" DRY WALL SAW • •

185mm Hi-Tensile Code: 29-702

SJ-PS2L

1L & 2L Pressure Sprayers

All Steel Adjustable Wrenches

Features Durable PE Bottle Adjustable Nozzle Spray Patterns (mist to stream) Dual Scale Volume Indicators Custom Designed Stable Base

SJ-PS1L

1L Pressure Sprayer SJ-PS2L

2L Pressure Sprayer

SJ-SPY/500

9.95

11.95

5L Professional Pressure Sprayer Features Corrosion Free 5 Litre Polyethylene Tank Dual Action Carry Handle & Pump Trigger Operated Chrome Plated Brass Lance Optimum Working Pressure 50-70psi Intended for use with most insecticides, weed killers, fertilizers, germicides, fungicides, herbicides, detergents & cleaning solution SJ-SPY/500

5L Pressure Sprayer

59.95

Trade Fibreglass Post Hole Shovel with BONUS White Concrete Shovel

BONUS PRODUCT

SJ-WS350

SJ-FGPHS

Claw Hammer All-Steel Handle Features Steel (Standard) Handle Adjustable Wrenches Rust Resistant finish Engraved Jaw Scale Corrosion Resistant Finish Chrome Vanadium Steel Wrench end Features Dual material soft grip handle Grip mechanically pinned to shaft Forged one piece head and handle Heat treated fully polished head and handle

All Steel Adjustable Wrench 6”/150mm

12.95

EC-ADJW6S

All Steel Adjustable Wrench 8”/200mm

16.95

EC-ADJW8S

All Steel Adjustable Wrench 10”/250mm

21.95

EC-ADJW10S

Claw Hammer Allsteel Handle 20oz/570g

All Steel Adjustable Wrench 12”/300mm

26.95

EC-ADJW12S

SJ-CH24AS

SJ-CH20AS

Claw Hammer Allsteel Handle 24oz/680g

29.95

31.95

Floor Scrapers Metal T Handle

Claw Hammer Antivibe Handle

Features Ideal for cleaning up floors after cement or mortar work 1350mm strong carbon steel T-handle Heavy duty construction Long handle for comfort Replacement blades are available

Features Dual material soft grip handle Grip mechanically pinned to shaft Magnetic nail start Forged one piece head and handle Anti vibration I Beam design

Features SJ-FGPHS Ideal for digging post holes, clearing & mixing work Trade Quality 3mm Fibreglass Handle Reinforced Steel Collar Carbon Steel Head Solid Fibreglass Head/Handle Insert Features SJ-WS350 Ideal for shovelling/mixing soils, sand & concrete All Steel Construction Extra Long 30" for Extra Reach All Metal D-Handle SJ-FGPHS

Post Hole Shovel SJ-WS350 BONUS

White Shovel D-Handle

39.95

Minimum Order Qty 6

SJ-FS200

39.95

SJ-FS300

49.95

Floor Scraper 200mm Floor Scraper 300mm

SJ-CH20FA

Claw Hammer Antivibe Handle 20oz/570g SJ-CH24FA

Claw Hammer Antivibe Handle 24oz/680g

31.95

35.95

All prices include GST

18V XR NAILER TWIN-PACK (NO GAS REQUIRED)

1399

Package Price Inc GST

Package Includes: • DEWALT DCN692N-XE 18V XR LI-ION BRUSHLESS 2-SPEED FRAMING NAILER Fires 90mm ring-shank nails into soft woods and 63mm into hard woods • DEWALT DCN660N-XE 18V XR LI-ION CORDLESS BRUSHLESS 16GA SECOND FIX NAILER Accepts 20° Angled Nails with 1.39mm x 1.61mm Diameter available from DEWALT • 2 x D EWALT DCB184-XE 18V 5.0AH XR LI-ION CORDLESS SLIDE BATTERIES Compatible with all DEWALT XR Li-Ion 18V Tools • D EWALT 10.8V - 18V XR LI-ION CORDLESS BATTERY CHARGER • D EWALT DWST1-71195 T-STAK VI DEEP STORAGE TOOL BOX 23L large-volume unit

BONUS ▼

+ 2 Boxes BOSTITCH SP75X306-3M 33º Paper Collated 75mm Nails

2 Boxes DEWALT DT9903-QZ 20º Galvanised 50mm Nails

FROM

DY-MARK PROTECH®

$5.95

Features & Benefits • Industrial grade cleaners and lubricants • Specially formulated for the professional who requires high performance results in industrial applications • Selected products with 2 way lockable actuator

ZINC GUARD™ QUICK DRY ENAMEL Features & Benefits

SPRAY & MARK

$8.95

• Quick dry

$6.50

• Long lasting metal protection • Excellent adhesion properties • Ideal for industrial applications • Provides a tough and durable finish to metal surfaces • Available in assorted colours

GUARD AGAINST CORROSION

Features & Benefits

• Toluene-free formula • Available in assorted colours • High opacity, high quality, true colour pigment loading • Applications include construction, landscaping, civil works and surveying • Unique spray pattern specifically designed for spot marking as well as “writing” applications

ZINC GUARD® COLD GALVANISING

ZINC GUARD® SILVER BRIGHT

ZINC GUARD® SILVER ZINC

Features & Benefits

• A zinc-rich high performance heavy duty corrosion inhibitive primer • Contains 91% zinc in dry film • Provides superior galvanic protection to new weld joints. .95 $

• Anti-corrosive silver paint designed to match the bright finish of hot dip galvanising • Provides a tough and durable finish to steel and iron

$10.50

• Fast drying, dual action - anti-corrosive primer and top coat • Provides excellent adhesion, corrosion resistance and long lasting durability to metal surfaces. • 98.5% zinc purity .95

All prices include GST Dy-Mark FATMAG JUN-AUG HPH-priced.indd 1

MNails Half Page Ad.indd 1

3/05/2016 4:26 PM

7/04/2016 4:33 pm

SPECIALS! M18™ 310ml Caulk and Adhesive Gun Kit

$425

$1,249

BONUS!

C18PCG310-201B

$975

M18FPP4J-502B

M18™ 600ml Aluminium Barrel Convert Kit (48081093)

M18™ Radio Charger

M18 FUEL™ 2 Pce Kit

M18 FUEL™ 4 Pce Kit

High Torque Polisher 1450W

$320

M18FPP2J-502A

$219

$235

$399

M18RC-0

M18™ Heavy Duty Wet/ Dry Vacuum

230mm Angle Grinder

HD18VC-1

AGV22-230

AP14-2200E

25L Wet/Dry L-Class Dust Extractor

800W 3-Mode SDS-Plus Rotary Hammer

SAWZALL® Demolition 12 Pce Kit

$59

$390

49221129

AS2-250ELCP

$315 PH27

M18™ TRUEVIEW™ LED Stand Light

660mm Jobsite Work Box

330mm Jobsite Work Box

$105

$349

$89

48228020

48228010

M18SAL-0

Smooth Blade Insulation Knife

$25 48221921

Serrated Blade Insulation Knife

$25 48221922

All prices include GST

A simple solution for temporary hand rails

.00

SAFETYBOOT

T O O B Y SAFET

cting constru ase for b e v .3 ti S4994 rails. st effec 4.1 & A ble, co porary guard 9 a s 9 4 -u S m A re of A ments nding te require free-sta h it w s plie down • Com rials nd take e mate et up a s y s t a s o bas m • E n o d be use • Can All prices include GST

IFS Half Page FAT MAG Ad.indd 1

3/04/13 4:19 PM

Molabolt Peg Anchor – Solving The Problem Of Blind Applications In Steel Construction

16mm

Drill 16mm

Application • Hollow steel sections • Plate steel sections • In primary and secondary 16mm steel work • Can be used in areas where Drill 16mmcommon rivets are unsuitable • Ducting, cladding, pipeline etc.

Molabolt Peg Anchor Fitting Guide Example 16mm

16mm

Drill 16mmDrill 16mm

1 1. Locate nut at top of stud 2. Insert into hole, allowing slotted section to pass through hole 3. Strike pin home 4. Torque to ABS recommendations.

Mola Peg Anchor

Mola Peg Anchor Guide pass through hole Fitting Fitting Guide 1. Locate nut at top of stud

Note: Care should be taken not to impact pin until bolt is fully home

Size

Grade

Finish

M8 x 50

8.8

Zinc / Clear

M10 x 50

8.8

Zinc / Clear

M12 x 60

8.8

M16 x 60 M20 x 75

Mola Peg Anchor Mola Peg Anchor Fitting Guide Product Clamping Range Fitting Guide

Tensile

Code (KN) 1. Locate nut at top of studnut at top of stud 1. Locate Min (mm) Max (mm) 2. Insert into hole, allowing slotted section toslotted pass through 2. Insert into hole, allowing sectionhole to pass through hole 3. Strike pin home 3. Strike pin PA0850 5home 34 20 4. Torque to ABS recommendations 4. Torque to ABS recommendations

Single Shear (KN)

Torque

PA1050

Zinc / Clear

PA1260

8.8

Zinc / Clear

PA1660

100

8.8

Zinc / Clear

PA2075

110

120

125

Please Note: all SWL tensile figures require a safety factor loading of 5:1 based on ultimate load results. Ultimate Load Testing has been carried out by independent UKAS accredited laboratories. Please Note: all SWL shear figures require a safety factor loading of 1.5:1 based on independent UKAS laboratory accredited

2. Insert into hole, slotted 1. Locate nutallowing at top of stud section to pass through hole test data. 3. Strike pin home 2. Insert into hole, allowing slotted section to pass through hole 4. Torque to ABS recommendations 3. Strike pin home

F.A.T.mag fun

Brought to you by Solutions on page 54

SUDOKU 

Alphabet Soup

Crossword ACROSS 1. Transylvania is there 4. Made slip-up 7. Baby fierce cat (4,3) 8. Steam burn 9. Consumer pressure 12. Adopted (policy) 15. Water removal system 17. Radio interference 18. Embroidery expert 21. Anchorage native 22. Alter (text) 23. Fling, shipboard ... DOWN 1. Rectified 2. Dog or horse 3. London’s Marble ... 4. Recedes 5. Recurrence of illness 6. ...Sea Scrolls 10. Exclude 11. Fencing swords 13. Divulge 14. Awry 16. Type of cigar 18. Benefit (of) 19. South African currency 20. Scalp growth Handy5448# © Lovatts Puzzles

Construction Supply Specialists

F.A.T.mag fun

Brought to you by Solutions on page 54

Lotus

• • • •

To solve the Lotus Logic puzzle: Each arc must contain the numbers 1 – 7. Each ring of shaded petals must contain the numbers 1 – 7. Each ring of white petals must contain the numbers 1 – 7. No number can be repeated in any arc or ring.

Fillins Place all the words listed into the grid. Each word can be used once only. The first word has been filled in. 5 LETTERS Alias Arose Aside Balsa Coach Coals Deans Ensue Habit Hired Hosed Irate Items Lease Ledge Masts

MOOR S

Moors Opera Orate Owlet Quill Quote Recap Roles Scent Slept Space Steed Tests Times Titan Unpin

Construction Supply Specialists

PROFESSIONAL

MEASURING

TOOLS

Magnetic Box Levels • Reinforced profile to maintain accuracy in tough work conditions • 2 solid acrylic vertical vials with Dual-View vial • Rubber shockproof end caps to protect the level’s integrity • Accuracy: <0.0005in/in. (0.5 mm/m) 322060

Description Price inc GST 600mm $75.95

322180

Description Price inc GST 1800mm $119.95

322090

900mm

$85.95

322240

2400mm

322120

1200mm

$89.95

Part No.

$135.95

$0000 Magnetic Torpedo Level Part No. 322010 • Features 2 solid shockproof horizontal and diagonal acrylic vials • Lightweight and durable cast aluminum body • Precision milled flat surface with dual magnets • Accuracy: <0.0005 in/in. (0.5mm/m) • Length: 250mm

$3295

Pipe Level Set 5 Piece Part No. 322011 • Handy 5 piece set that is suitable for standard metal and plastic pipes • Perfect for all plumbing and electrical pipe/conduit work • Features a spring loaded design for easy click on attachment • Two easy to read vials: One horizontal and one vertical • Pipe size range: 1/2”, 3/4”, 1”, 1/1/4 - 1/1/2” & 2”

Digital Magnetic Box Levels • Features a micro electrical mechanical system • Backlit LCD displays hold, mode and memory recall functions • Buzzer sounds when level is at 0°, 45° and 90° • Digital accuracy: 0.10 at level and plumb, 0.20 at other angles 322050

600mm

Price inc GST $159.50

322051

1200mm

$229.50

Part No.

$29

Description

Stainless Steel Rules • Highest precision • Hardened stainless steel • Accurate to JIS B 7516 - grade one specifications • Satin chromed for rapid reading • Markings photographically etched • Made in Japan

$0000

$1295 Handy Magnetic Mini Level Part No. 322013 • Shockproof solid acrylic vial provides a quick and accurate reading • The lightweight aluminum box profile fits easily into any tool belt or pocket • Rubber shockproof end caps • Accuracy: <0.0005 in/in. (0.5mm/m)

Part No.

Width 15mm

0.5mm

150mm

Double sided Metric & Imperial

25mm

1.0mm

300mm

$13.95

30mm

1.2mm

600mm

$29.95

35mm

1.5mm

1000mm $55.95

150B6 30012 60024 100036

Thickness

Length

Price inc GST $6.95

Style

All prices inc GST

WHEN YOU HAVE SERIOUS WORK TO DO,

BRING IN A SPECIALIST

Anti Friction Dry PTFE Lubricant

High Performance Wet PTFE Lubricant

Brake & Metal Parts Cleaner

P/N

DESCRIPTION

PRICE

21105 21106 21107 21101 21103 21102 21104

Anti Friction Dry PTFE Lubricant 150g/219mL High Performance Wet PTFE Lubricant 318g/394mL Brake & Metal Parts Cleaner 300g/452mL High Performance Silicone Lubricant 300g/451mL Fast Acting Citrus Degreaser 400g/432mL High Performance White Lithium Grease 300g/454mL Fast Drying Contact Cleaner 290g/418mL

$14.95 $15.95 $9.95 $9.95 $5.95 $9.50 $17.95

High Performance Silicone Lubricant

Enhanced lubrication & protection

Long lasting wet lubrication

Removes oil, grease, dirt and brake fluid

Prevents parts from sticking

Dry film that resists dirt, dust and oil

Extends life of tools and equipment

For use on metal, plastic & glass

For use on metal, glass, vinyl, rubber & plastic

Cleans without disassembling the unit

Waterproofs & protects against moisture

Safe to use on brake linings, pads & drums

For use on metal, plastic, rubber & wood

Fast Acting Citrus Degreaser Removes grease, oil,

High Performance White Lithium Grease

Fast Drying Contact Cleaner

fat, dirt, grime & soap scum

Water and heat resistant lubricant

Fast acting, non conductive cleaner

Power foam works immediately on contact

Long lasting protection against rust & corrosion

Penetrates quickly and leaves no residue

Easy to rinse with water

For use on metal to metal connections

For use on electrical equipment, contacts, plastic & rubber

All prices include GST FM10_WD-40 Company.indd 1

28/04/2016 4:44 PM

Solutions

SUDOKU 

Lotus

Brought to you by

Crossword

Alphabet

Fillins

MOOR S QU I L L A RECOUN T E SPACE OPERA T I T AN T I ME S SLEPT ENSUE L N COA L S HAB I T OW L E T I RATE AS I DE ROL E S C AGE L E S S T HOS ED DEANS

Boxer, Basenji, Retriever, Poodle, Kelpie, Husky, Corgi, Mastiff, Shih-tzu, Weimaraner.

Construction Supply Specialists

Extendable Indexing Pry Bars 82220 457mm/18” to 736mm/29”

$65

82248 736mm/29” to 1219mm/48” $139

8m Control Series Tape $24 CS58SI4

• 14 Locking Head Positions • Head Indexible through 180°

g on bottom of • Drag Strip™ access openin tion control tape for measuring and retrac • Wide End Hook Stand-Out • 30mm Wide Blade with 3m

XL-Power Tape

10m x 25mm

XL410M8 XL410ME8

10m/33’ X 25mm

$33 $33

Case • High Impact Bright Orange mm in ted dua gra • White Blade

1000V Pliers

CHV6548 CHV508 CHV5428 CHV410

Long Nose Combination Diagonal Multigrip

Combination Ratcheting Wrench Sets 9416 16 Pc 12Pt Metric $229 9312 13Pc 12Pt SAE $210 • Ratcheting Box End Needs As Little As 5° to Move Fasteners vs. 30° for Standard Wrenches • Surface Drive® on Box End

8Pc Screwdriver Set

$25 $25 $25 $25

SD8SET

• Soft Grip Insulated Handles • Chrome Vanadium Blades • 1000V Rated

Clamps • • • • •

$49

227Kg. Clamp Force Pipe Grip Connect Ends Convert Clamp to Speader Twin Lock Connector - enables the connection of multiple clamps at any angle, rotation, or height

CC150

150mm

CC300 CC450 CC600 CC900 CCTL100

300mm 450mm 600mm 900mm 3” Connector

$22 $23.50 $25 $29 $30 $6

All prices include GST

GREAT DEALS FROM RICHMOND

HEAVY INDUSTRIAL SERIES CASTORS

BUY 4 AND SAVE!

100MM POLY NYLON WHEEL CASTORS 250KG CAPACITY

100MM POLY CI WHEEL CASTORS 250KG CAPACITY

All prices include GST

P HANDLE HAND TROLLEY • 200kg Load Capacity • 350mm x 180mm Toe Plate Size • 4.10x3.50-4 tyre size • Available in puncture proof (PHR104) and pneumatic (PHR103) wheel types

PHR103 PNEUMATIC

S4410SLB DESCRIPTION

S4410 PART NO.

Swivel Castor S4410 Swivel Brake Castor S4410SLB Rigid Castor R4411

S4400

S4400SLB

BUY 1 FOR

BUY 4 FOR

$39.00 $59.00 $35.00

$31.00 $47.00 $28.00

150MM POLY NYLON WHEEL CASTORS 400KG CAPACITY

DESCRIPTION

$ 59 INC GST

PART NO.

Swivel Castor S4400 Swivel Brake Castor S4400SLB Rigid Castor R4401

BUY 1 FOR

BUY 4 FOR

$37.50 $59.00 $35.00

$30.00 $47.00 $28.00

150MM POLY CI WHEEL CASTORS 250KG CAPACITY

PHR104 PUNCTURE PROOF

$ 75 INC GST

SAFETY TAPE • Identify hazards in your workplace with Richmond’s range of safety tape • Red/white & yellow/black varieties available • 100m (L) 75mm (W)

S6644 DESCRIPTION

S6655SLB

S6644SLB PART NO.

Swivel Castor S6644 Swivel Brake Castor S6644SLB Rigid Castor R6645

BUY 1 FOR

BUY 4 FOR

$45.00 $65.00 $39.00

$36.00 $52.00 $31.00

DESCRIPTION

S6655 PART NO.

Swivel Castor S6655 Swivel Brake Castor S6655SLB Rigid Castor R6656

BUY 1 FOR

BUY 4 FOR

$39.00 $59.00 $36.00

$31.00 $47.00 $29.50

*Prices listed are per castor. Prices include GST

420MM PNEUMATIC WHEEL • 420mm diameter • 16 x 6.50-8 tyre size • Turf tread pattern • 200kg load capacity

TRADIES WHEELBARROW

$ 75 INC GST

• 100L tray volume • 200kg load capacity • Snag-free steel tray

PN1610-1BB

• Available in 16” pneumatic (WBR020) and puncture proof (WBR022) wheel types

400MM PUNCTURE PROOF WHEEL • 400mm diameter • 4.00-8 tyre size • Industrial tread pattern • 200kg load capacity

$ 75 INC GST

$ 7.50 INC GST

WBR020 PNEUMATIC WHEEL

PF1632-1

$ 165 INC GST

WBR022 PUNCTURE PROOF

$ 220 INC GST

WHEELS & CASTORS • MATERIAL HANDLING • PIPE ROLLERS SITE SAFETY • GATE HARDWARE • FELT FLOOR PROTECTORS

57 200MM INDUSTRIAL BENCH GRINDER ATBG600/8

MULTITOOL LINISHING ATTACHMENT PO362

Abbott & Ashby Industrial 200mm Bench Grinder 600 watt - 240 volt 10 amp plug.

Belt and disc linishing attachment with a 915mm x 50mm belt, 178mm disc, 89mm contact wheel.

Full 3/4 HP PLUS, the most powerful bench grinder in its class with fully adjustable tool rests. Features 50mm wide wheel guards to accept the use of wire wheels without fouling. Weight 23kg

Suits most 150mm & 200mm bench grinders with a minimum of 1/3 HP and screw mounted guards. Ideal for those finishing jobs such as tool sharpening, edge sanding, smoothing welds, polishing etc. Use on many materials such as wood, plastics, metals and ceramics with a quick change of belt. Weight 4.88kg

NYLON HAMMER 1/1/2LB, 38MM TH712 Chrome plated Zinc head with Nylon face. Fitted as standard with screw-in White Nylon faces and plastic handle according to size. Used, due to the easily interchangeable heads, as a multi purpose striking tool in most assembly applications including engineering, furniture, shopfitting, partitioning, double glazing, injection moulding dies etc.

$3850

COPPER HAMMER 4LB, 44MM TH314 Malleable Iron head fitted with cylindrical faces of Copper. The Malleable Iron head and the Copper faces combine to provide the weight for the blow and the Copper faces prevent damage to expensive machined sub components and assemblies. Used as a general-purpose softfaced hammer in automotive and general engineering for assembly, repair and maintenance.

$9900

$21900 $22500 All prices include GST FM10_White International.indd 1

3/05/2016 4:46 PM

C5 GAS FASTENING

The Next Generation Gas Tool for Concrete

• 105 Joules • Direct Fuel Injection • 3.4 kg - Light and easy to handle • Easy depth adjustment • Swing trigger • Interchangeable long and short trak • Includes 2 batteries

BUY THE TRAK-IT C5 (Long or Short Trak) GET 5600 PINS (7 Boxes) OF YOUR CHOICE $ PLUS FUEL CELL FREE

All for the promo price of

1499

Product Code 65301

Description C5 Trak-It Deluxe Tool - 40 Pin Trak

65306

C5 Trak-It Deluxe Tool - Short 20 Pin Trak

55313

C5 Trak-It Pins - 13mm (800 pins) & 1 Fuel Cell

55320 55336 55336TS

Qty 1 1 800 Box

C5 Trak-It Pins - 20mm (800 pins) & 1 Fuel Cell

800 Box

C5 Trak-It Pins - 35mm (800 pins) & 1 Fuel Cell C5 Trak-It Pins - 35mm Twist Shank (800 pins) & 1 Fuel Cell

800 Box 800 Box

55313 / 55320 / 55336

55301 55336TS

Inc GST

KNIPEX HEAVY DUTY POWER PACK 3PC Part Number: 00 20 11 S Price: $159.00 - Three piece plier set including popular: Knipex Cobra (250mm) High leverage combination pliers (200mm) High leverage diagonal cutters (200mm) - Made in Germany New-to-world 3 length design - 10" mode for tight spaces, 18" mode for general purpose, 24" mode for maximum leverage and reach

New M18 Fuel Rotary Hammer SDS Plus D handle Code: M18CHD-0

Price: $425.00

25PCE METRIC DRILL SET Code: D101MTLSM3 Price: $146.00 - 1.0 - 13 x 0.5mm rises - Metal case BONUS: 1 x Engineers Black Book (limited stock, first 1000 sets only)

DEWALT 18V NAILER TWIN PACK Code: DCZ266P2-XE Price: $1399.00 - DCN692N-XE Framing Nailer - DCN660N-XE Fixing Nailer - No Gas Required - Bonus 2 boxes 75mm Framing Nails - Bonus 2 boxes 50mm Fixing Nails

4 PIECE FULL POLISH FLEX HANDLE RATCHET SET Part Number: 81230P Price: $155.00 Includes: 81012P 1/4” Dr. 81212P 3/8” Dr. Stubby 81215P 3/8” Dr. 81306P 1/2” Dr. - Double-Stacked Pawls Engage a 60-tooth Gear Providing Exceptional Strength, Exceeding ASME Specifications - 6-Position Flex Head for Adjustable Access Angle - 120 Positions, 3° Ratcheting Arc

STERLING 10 PCE ACETATE HANDLE SCREWDRIVER SET Part Number: SSAO1-10 Price: $35.00 - Precision Ground, Induction Hardened and Magnetized Tips - High Impact Oil and Solvent Resistant Handles Prevent Splintering

HOT DEVIL HEAT WAND / WEED KILLER Part Number: HD8936B Price: $49.95 - Auto Ignition - Operates on Propane Gas - Lightweight / Portable - Suitable in Wet or Dry Conditions

LEVELLING PACKERS LEVELLING PACKERS

Code: HSSB Price: $65.00 Code: HSSB Price: $65.00 50 pieces each1.5mm size: 1.5mm 50 pieces of eachofsize: Blue, 5.0mm white, white, 3.2mm3.2mm Blue, 5.0mm Red, 6.4mm Red, 6.4mm Green Green &1 &1 0.0mm0.0mm Black. Black.

IMPACT-A P2 DUST MASK WITH VALVE

SPEED CUTTERS

Code: IMP/PC321 Price: $29.00 - Exhalation valve for extra comfort - Easily worn with glasses and goggles - Inner foam provides a seal on all faces - Durable and light-weight - Dual head strap for optimum fit - Contoured for comfort

Price: From $55.00 - Specifically designed for the CLA-2720 Cordless Atra Ace to maximise hole rate - ‘One - Touch’ Shank suits all Atra Ace Models and most other brands - Available from 12mm to 27mm diameters in 1mm increments, all with 20mm depth of cut

LIGHTWEIGHT MAGNETIC DRILL Code: CLA-2720 Price: $2,950.00 - LIGHT - Total Weight Just 7KG!! (including battery!) - CORDLESS - Powered by 18V 4Ah Li-Ion battery - COMPACT - Only 293 x 199mm (no taller than a std ruler!) - Magnetic Force Control Function - Complete with 2 x Li-Ion Batteries, Carry Case and 1 x Charger - Capacity 27mm x 20mm Depth

STANLEY FATMAX PRO TRIPLE LEVEL PACK Code: XTHT0-43-119 Price: $149.95 - 600mm, 1200mm & 1800mm Levels - Bonus Bag that fits all three levels - Rock solid beam construction - Vials magnified by 20%

STERLING HEAVY DUTY HAMMER TACKER Code: AH-915 Price: $58.50 - Rugged construction with rubber grip - Takes all style staples - Face protection guard ensures staples finish flush with workface

SENCO GAS PACK 3.06 X 75MM BRIGHT Code: HC27APB-FC3 Price: $65.00 - Includes 3000 high quality Bright Nails coated with Senco patented Sencote® - Includes 3 Fuel Cells – High performance fuel with a clean combustion - Comes with Old and New style valves for the Fuel Cells – Compatible with other brand gas tools

PYTHON SLIMLINE NECKBAND EARMUFF Code: EMPYTNB Price: $30.10 Class 4 23db rating Robust steel wire construction Solid, lightweight ear cup constructions

Milwaukee Cheater Pipe Wrench Code: 48227314 Price: $95.00 - New-to-world 3 length design - 10" mode for tight spaces, 18" mode for general purpose, 24" mode for maximum leverage and reach

BIT

HIGH PERFORMANCE SDS-PLUS MASONRY

NEW Bordo X-Bits are extremely tough and wear resistant. • Suitable for hard stone and high MPA concrete. • Precision cutting facets create dimensionally accurate holes for improved anchor performance. • Solid engineered heavy duty core the length of the drill prevents bending and breakage. • Ceratizit® solid 4 edge tungsten carbide head.

SUPERIOR CONSTRUCTION SOLUTIONS