FATMAG Oct/Dec 2019 by Engage Media

FATMAG l

FASTENERS, ADHESIVES AND TOOLS I OCTOBER - DECEMBER 2019

Find us on Facebook!

We’re at www.facebook.com/ constructionsupplyspecialists

Team time The team it

CLADDING

CRISIS

takes to get Milwaukee Racing winning

Page 24

Take care What types

Experts like Geoff Hanmer are calling out governments on the scale of the combustible cladding problem

of insurance do you need?

Page 12

Page 19

Good oil The story of

Get the power The latest advances in

Alemlube Page 22

battery technology, and how it helps you Page 9

ERS ADHESIVES

O MA

HES

FA S T E N E R S

IVES TOOLS

TE.

win with milwaukee® $27,300 worth of prizes to be won

Refer to page 11

CONSTRUCTION SUPPLY SPECIALISTS 90+ Stores Nationally

For Your Nearest Store Location Visit www.constructionsupply.com.au

TOO

L S M AT E . F A S

FOSROC. FUTURE PROOF. At Fosroc, we know great construction demands solid foundations. We deliver tailored, functional construction solutions - both above and below ground. Talk to us to future-proof your buildings and infrastructure.

Concrete Repair

Grouts

Waterproofing

Joint Fillers & Sealants

Industrial Flooring

Protective Coatings

Surface Treatments

Concrete Admixtures & Grinding Aids

*Fosroc and the Fosroc logo are trade marks of Fosroc International Limited, used under license.

2 CSS F.A.T. MAG

Construction Supply Specialists Pty Ltd Administration - Head Office 17 Lakeside Drive, Broadmeadows VIC 3047 Tel: (03) 9357 4228 Fax: (03) 9357 4229 jeff@cssgroup.com.au www.constructionsupply.com.au

CONTENTS October-December 2019

About us The store listed on the front of this magazine is a member of the Construction Supply Specialist Group. While the majority of your work will be conducted with your local CSS Member, this store is part of a national network of stores that can provide you with exceptional service and support wherever you may be working in Australia. For more store locations, visit www.constructionsupply.com.au.

COVER STORY

Cladding: the hot topic

Calls have become more urgent to solve the problem of combustible cladding.

04. Welcome What it means to be the name behind the local name.

05. News NSW appoints a Building Commissioner, and Tom Drane’s latest USA adventure.

09. Power up High-capacity batteries are making work safer and more efficient.

16. The sand castle Armand Lizee’s Margaret River home has picked up multiple awards.

19. Insurance Without insurance, tradies could be

exposed to crippling hits to the back pocket.

22. Supplier profile Alemlube has grown from a small player to a category winning market leader.

24. Driving success Milwaukee Racing is back for its sophomore season.

40. F.A.T.MAG fun The monster crossword,

COVER PHOTO: ARUNAS

Sudoku and more…

PLUS Supplier editorials Advice, new products and more from a selection of CSS suppliers. Check out past issues of the CSS F.A.T.MAG at www.cssfatmag.com.au. CSS F.A.T. MAG 3

WELCOME

Flying in the face of convention The owner of the store, whose name appears on the front of this magazine, along with many other similar store owners, is continually being told by marketing gurus, corporate soothsayers and advertising whiz kids that they need to abandon their local identities and ‘brand up’ under a corporate banner. According to these guys, there is no way the true independent store owner can survive, unless they change their ways, change their identities and basically become something different than what they are and need to be. Apparently, this lot believe: “There is no place in industry for individual thought.” “You must pledge your allegiance to a collective and become part of THE ONE to exist.” “It is the only way forward as there is no place for singular, independent action, reaction or interaction here.” At CSS, our unshakable belief is that this is the stuff of Corporates, MultiNationals, Franchise Operations and those that are described as Big Boxes. This is where the almighty dollar counts above all else and the need to be understanding, 4 CSS F.A.T. MAG

interactive, assertive, caring and involved with those that you do business with, are traits seen as unnecessary and unimportant. Not so around here. CSS and its members continually fly in the face of convention and absolutely believe that the true independently owned and operated company knows its community better than anyone else and is best placed to provide service and support to businesses and/or individuals just like you. The CSS model ensures all members are in control of their own finances, always have their voices heard in a balanced fashion and control their own operations in the best interests of themselves and the customers they deal with in their communities. They are the best ones to know what is needed—not some boffin at H/O who has no idea about what the needs of their customers are or how their business really works. We know and respect that local companies, in local communities, have direct connections with people in those communities and therefore know the individual needs and wants

of their customers. They structure their businesses to cater for them. The owners of the stores run the business in every sense of the word and are not puppets doing what they are told to do because it is good for the collective. They are making decisions based on what they know is good for them and the customers in their community. Don’t be fooled though, our group is as nationally strong as any out there. Our 60 plus members have over 80 stores between them and can and do offer national deals, backed by national distribution channels right across the country when required. CSS members have the brands, the knowledge, the service and support capabilities, the experience and competitive pricing to match any of the so-called ‘big names’ out there, and that is what is important for everyone to know. Check our members out at www. constructionsupply.com.au THE LOCAL NAME IS THE MOST IMPORTANT NAME YOU NEED TO KNOW. CSS is simply ‘The name behind the (local) name’. Jeff Wellard

NEWS NSW Building Commissioner appointed to reform industry The New South Wales Government has appointed a building and construction expert to the role of Building Commissioner to implement the biggest overhaul to building law’s in the state’s history. David Chandler was selected to be the NSW Building Commissioner and has more than 40 years of industry experience. Premier Gladys Berejiklian said Chandler’s appointment would be invaluable as the State Government

moves to restore confidence in the construction industry. “We know there are national challenges affecting the industry, but this new appointment will play a key role in protecting NSW homeowners and driving critical reforms,” she said. The Building Commissioner will be responsible for the investigation and disciplinary action for misconduct in the building industry, while also overseeing licensing and auditing processes.

Tom takes on the USA again There’s been a lot happening at Team Drane since the last editorial, so we thought we’d better bring you up to date. First up, Tom has competed in the first three rounds of The Oceania Junior Cup (OJC – Road Racing) and celebrated his first win at the Broadford track in Victoria in round two. Round three was at Morgan Park in Queensland and after another great showing there, Tom is currently sitting in 4th spot and just a few points from the leader. With 3 rounds to go in the OJC, Tom is looking forward to flying around Winton (Vic), then off to the iconic Phillip Island circuit (run alongside the Australian Superbike Championships) and then off to Sydney Motorsport Park at Eastern Creek for the finale. Now just for good measure, Team Drane raced home as soon as they had finished at Morgan Creek, packed up and jumped an A380 jet and headed off

to Ohio in the States to attack the AMA Flat Track Grand Nationals again. In just three days, Team Drane travelled half way around the world, where Tom hopped on a new bike (KTM250cc) and got ready to compete in a new class. “Odds against”, you might say. What followed was 4 solid days of racing across 3 different classes. Imagine this, a 33kg, 13year old boy muscling a 106kg KTM 250 around a track and over jumps whilst trying to maintain speed, balance and concentration. He did not disappoint one little bit. Day 1 ended with Tom dominating and winning every race competed in. Day 2 was TT and day 3 was short track events and both were real grinds. Tom worked hard and put points on the board but dropped from leader to 2nd with three days down. Day 4 and Tom shone out once again in the Half Mile, where weight and size were on his side and while he won the day, overall, on a championship basis, he finished in second place just a handful of points behind the eventual winner. Great effort though and we are pretty proud of him. In the end this was a memorable trip, made even sweeter with Tom’s younger brother Sam joining the team. At only 8 years of age, Sam finished 4th overall, competing in the 85cc Modified class for 7-11 year olds, on a bike, restricted in Australia to those over 9 years. Looks like another little champ on the march.

What’s next for Team Drane? It is time for a week or so of R and R. Then straight back into the swing of racing, training and travelling to get ready for the Australian Junior Dirt Track Championships, which will be held on the Central Coast. This will be followed by the remaining rounds (4,5,6) of the OJC. Team Drane is doing us proud and to stay up to date with the results, be sure to follow on Toms Facebook page Tomdraneracing59 or through the CSS Facebook page. 

CSS F.A.T. MAG 5

WIN $1,000 voucher for use in your CSS Member Store

GIFT CARD

Simply complete our survey for your chance to WIN! We want your feedback to make the CSS F.A.T. MAG even better. This is your chance to help us improve and make our magazine the best resource it can be for you. Donâ&#x20AC;&#x2122;t forget to tell us in 25 words or fewer about a problem in your role or business youâ&#x20AC;&#x2122;d like us to

explore solutions to in an upcoming article. The best answer will receive a $1,000 Voucher to spend on any products of your choice at your local CSS Store. You can take the survey online at cssfatmag.com.au/survey Terms and conditions are available at cssfatmag.com.au/survey

To theof value

0 0 0 1 $

2019 Reader Survey

Name_______________________________________________

Company name________________________________________

8. Please tell us about the topics we cover and what you’d like to see more of.

Job Title_______________________________________________

Content

Email__________________________________________________

Profiles (articles about suppliers, builders or people in the industry)

Phone number__________________________________________ 2. What is your age group? 19 or under 20-29 30-39 40-49 50-59 60-69 70 or over? 3. What trade do you work in? Bricklayer Builder Cabinet Maker Carpenter Concreter / Form Worker Construction Worker Electrician Landscape Gardener Mechanic Metal Worker / Welder Painter Plumber Roofer Other (please specify) 4. Are you a member of our F.A.T. MATE program where you can access special deals & discounts, bonus offers and VIP event invitations? Yes No, but I’m happy for you to send me some info about it No and I don’t think I’m interested 5. Where did you get this copy of F.A.T. MAG? Instore It was posted From a friend It was on the work site 6. Total number of people who you believe will read this copy of F.A.T. MAG? Just me Two Three Four or more

Less

Same

Current affairs (articles about issues in the industry) Advice (articles with tips for particular equipment or products) Business (articles with advice on aspects of running your business) Lifestyle (articles about cars and racing) Fun stuff (crosswords etc) 9. Do you read construction related content or market your business on any of these social media platforms? (Tick all that apply.) Facebook Twitter LinkedIn Instagram Pinterest 10. Have you ever enquired about products or services you’ve seen in CSS F.A.T MAG or F.A.T Specials? Never Once Twice Three or more times. 11. Have you ever visited a CSS Member Store as a result of something you’ve seen in CSS F.A.T MAG or F.A.T Specials? Never Once Twice Three or more times. 12. Lastly, for your chance to win a $1,000 voucher to spend at any CSS member store, tell us in 25 words or less your best idea for something we can include or cover in CSS F.A.T. MAG (think about a problem in your job role or business you would love solutions to). The best answer, judged to be the most creative and original, will win.

7. Which of CSS’s products do you read? (tick all that apply) F.A.T. MAG F.A.T. Specials F.A.T. P.I.G Emails from CSS about our F.A.T. MATE program or F.A.T. MAG CSS F.A.T. MAG website

TO SUBMIT THIS SURVEY, visit www.cssfatmag.com.au/survey to complete online or fax it on 02 9518 5600, or post to PO Box 92, Pyrmont, NSW 2009. CSS F.A.T. MAG 7

CRETE - OFF

THE ACID ALTERNATIVE CONCRETE DISSOLVER

Crete-Off is a nontoxic, biodegradable,“environmentally green” liquid designed to

dissolve the Portland cement component in concrete, mortar, thin set, grout, and other Portland cement based products.

DISSOLVES AND CLEANS CONCRETE OFF: Hand Tools & Formwork

Ready-Mix Trucks

Windows & Frames

Machinery

Available in 750ml & 5Ltr Spray Bottle & 20Ltr Container

GOOD ADVICE

apid advances in electric car technology are helping tradies and construction workers as they reap the benefits of ever-better battery technology for power tools. At a time when corded tools are on the wane because of slips-and-trips hazards on work sites, the latest lithiumion batteries are delivering benefits such as higher power output, longer run times and quicker charging. Tony Brown, product manager— power tools and accessories at Metabo Australia, says the 21700-format lithium cell battery packs that are shaking up the power tool market have improved further on the 18650 cell packs, which were used in the original Tesla electric cars. “The electric car industry has invested heavily in developing lithium battery technology to achieve increases in power and runtime … So the power tool industry has been privileged to be able to take advantage of this research and development and adapt and transplant it into cordless tools to achieve similar results,” he says. The upshot is that corded, pneumatic and petrol-powered tools are becoming increasingly rare. For relatively simple tasks involving drills and impact drivers, for instance, cordless tools dominate. “It’s very fast-moving,” says Michael Di Iorio, product manager—power tools at Milwaukee Power Tools. “In just the past five years we’ve constantly seen higher-capacity batteries coming out.” The aim, he says, is to provide tradies with a full day’s worth of power-tool work on one battery charge.

Safer and more productive

Safety aside, power-tool manufacturers want tradies to consider the efficiency and productivity gains from cordless products. Set-up times for drilling and cutting work have been slashed, while Michael Princic, product manager for Makita Australia, also points out that cordless tools with lithium-ion batteries are much quieter and do not vibrate as much as older tools. “So they are able to use these cordless tools for longer periods because they vibrate less and they’re not as heavy as the traditional corded product,” he says. Princic adds that Makita has tried to

Power tools are benefitting from the investment in battery tech.

Power up

High-capacity batteries are making work safer and more efficient for tradespeople and construction workers. ensure that most tools in its range are compatible with one type of battery. “That means it doesn’t limit tradespeople to one tool or trade. They’re able to use pretty much everything in their toolbox on one battery.” At Stanley Black & Decker Australia and New Zealand, commercial training manager Cameron Beecroft says it is clear that greater productivity has been instrumental to the uptake of cordless tools. On large apartment construction projects, for example, he notes that tradies using older, corded tools may have to spend 15 minutes or so setting up in each shell when in many cases they just need to do two or three minutes of drilling or cutting. “Now you’ve got a product as strong as a corded product without the set-up time,” says Beecroft. The transition to cordless has been

smooth for relatively small tools which can be powered by standard 18volt battery packs. However, Brown concedes that the scenario for highoutput tools such as chainsaws, large mitre saws and 9-inch angle grinders is more complex. “It’s okay if you want to make a few cuts, or do a small amount of grinding, for example, but if you’re in a workshop or you’re doing a lot of heaving grinding the batteries can lack a bit of guts,” Brown says. Nevertheless, Brown says this desire for extra power and run times is prompting constant advances in lithiumion batteries, “and we’re getting pretty close”.

Weighing up the options

To address the needs of more powerhungry tools and tradies, most CSS F.A.T. MAG 9

GOOD ADVICE

manufacturers have their own unique offering. Milwaukee has released its M18 REDLITHIUM-ION High Output 12.0Ah battery pack, which promises a massive increase in fade-free power while running substantially cooler through heavy applications, allowing tradies to push their cordless tools harder and for much longer. “Not all tools need that extra power,” Di Iorio says. “But with a tool like a chainsaw or a table saw where they require a lot of energy, these new high-output batteries have been able to provide optimum power performance and run time.” He urges tradies to think about tools that run cooler. While standard batteries may not go flat quickly, the risk with heavy jobs is that tools can overheat and suffer motor damage. Stanley Black & Decker, through its DEWALT brand, has produced the first battery pack, called the FLEXVOLT, that automatically changes voltage from 18

volts to 54 volts when the user changes tools. Metabo’s LiHD battery packs cover the spectrum from 400 to 3200 watt and boast maximum power over a long run time, using both high-density lithium batteries and twin 18-volt technology on its higher-demand tools. And Makita, which is seeking to keep batteries relatively light and on the same platform, focuses on tools that let tradies use two 18-volt batteries in tandem when they need a power boost. “So they just have to click two batteries in side by side on the grinders and bigger saws that need the higher power,” Princic says. He adds that tradies should be aware when purchasing batteries that lithium-ion products offer protection from overheating, overloading and overdischarging. “So those three things prevent deterioration or damage to the lithiumion in the battery, which means you have a more durable battery that will last a

longer period of time.” Princic warns against leaving battery packs in the back of hot utes because this will damage the lithium-ion and reduce the longevity of the battery. Likewise, tradies should put battery packs straight on the charger after use because the charger has a system that cools down the cells at an optimum rate.

‘Tip of the iceberg’

For all the advances in battery technology to date, one thing is for sure—the innovations will not stop. “It’s the land of the V8,” Beecroft says. “Aussies love more power.” He says recent battery technology improvements for power tools are “the tip of the iceberg”, while brushless technology in motors is also leading to superior performance. “If you look at the advancement in motor technology and battery technology, the batteries that we’re using today won’t be the ones we’re using in 10 years. They’re getting better and better.” 

From site cut to saw cut, Flextool offers a complete range of quality professional concrete and construction equipment.

Site Preparation

Concrete Placing

Concrete Finishing

Concrete Cutting

Surface Preparation

Soil Compaction Equipment & Pumps

Concrete Vibrators, Concrete Power Screed, Hand Tools

Walk-Behind & Ride-On Power Trowels

Brick / Masonry Saw, Diamond Blades

Concrete Grinders, Scariﬁers & Sprayers

10 FM_JUL_Flextool_Ad_v2.indd CSS F.A.T. MAG

6/8/19 12:16 pm

win with milwaukee

® ST

ERS ADHESIVES

O MA

LS ES

TOO

L S M AT E . F A S

1sitze

HES

FA S T E N E R S

IVES TOOLS

TE.

$27,300

worth of prizes to be won

A $12,600 mega milwaukee ® tool kit over 300 PIECES FOR THE MAD MILWAUKEE® F.A.t. MATE » Not all products are displayed » Check out T’s and C’s for full list

images shown are for illustration purposes only*

30 milwaukee® weber 2rnizde bbqs worth p $490 each

H0W TO ENTER Spend $100 or more on a Milwaukee® product from any CSS member store during October and November 2019 AND become a F.A.T MATE for your chance to win. Register your purchase at www.constructionsupply.com.au and remember to keep your receipt - Every invoice over $100 of Milwaukee product equals one entry. (Invoice must be from a CSS Member Store)

images shown are for illustration purposes only*

» Gas bottle not included

Starts 8:00 AM AEST 1/10/2019. Ends 11:59 PM AEDT 30/11/2019. Open to AUST residents 16+ who fulfil the entry/eligibility requirements. Major Prize is an Mega Milwaukee Tool Kit RRP $12,600. Minor Prizes are 30 x Milwaukee branded Weber BBQs RRP $490 each. Total prize pool $27,300. Prize draw 12:00 PM AEDT 5/12/2019 at TPAL, Level 2, 11 York Street, Sydney NSW 2000 in the presence of an independent scrutineer. Winners notified via Email within 5 business days and published at www.constructionsupply.com.au on 9/12/2019. Promoter is Construction Supply Specialists Pty. Ltd. ABN 67 100 073 087. 17 Lakeside Drive, Broadmeadows VIC 3047. Authorised under NSW Permit No. LTPS/19/36826, ACT Permit No. TP 19/03903, SA Permit no. T19/1292. For full terms and conditions refer to www.constructionsupply.com.au

COVER STORY

“Getting the combustible cladding off is going to take some time but it’s a real priority,” says architect and academic Geoff Hanmer.

12 CSS F.A.T. MAG

Hot topic

After horrifying building fires took place in both Melbourne and London, calls have become more urgent to solve the problem of combustible cladding.

PHOTO: ARUNAS KLUPSAS

ust over a year ago, a fire at Grenfell Tower block in West London left 72 people dead. It is believed that plasticcored aluminium cladding contributed to the speed with which the fire engulfed the building. Last February, a fire at the Neo200 building had an eerie similarity to the London disaster. The Melbourne block was allegedly ignited by a single smouldering cigarette and the fire spread quickly across the floors. Only one person was hospitalised but the incident has become a wake-up call to the government, industry regulators and the public. “Many residents have realised that their apartment block has combustible cladding and I’m sure it’s weighing on their minds,” says Geoff Hanmer, managing director of the ARINA architecture firm and an adjunct lecturer in architectural structures and construction at UNSW.

REPORT TIME

In Australia, cladding has been identified as a fire risk on hundreds of buildings, and many industry groups are demanding major reform. Longterm, it may involve the government picking up the bill for refurbishments (similar to what’s happening in Victoria) or offering financial support in the form of loans. In the UK, the central government has given local authorities the power to replace risky cladding. “We should do the same here,” says Hanmer. According to the Sydney architect, buildings with cladding that are four or more storeys high breach what is one of the foundation principles of fire performance—fires can spread from floor to floor. “Fire should never be able to spread between units and certainly not between floors. If a fire can spread between floors, everything we base our fire principles on—the operation

of sprinklers, how people escape and how the fire brigade performs—are out the window.” Combustible aluminium composite panels—also known as combustible cladding—is still on the market in Australia, and Hanmer notes that it may still be being installed on buildings around the country. As a replacement option, he suggests aluminium composite panels that have a mineral fibre core with less than 30 per cent polyurethane in the panel core. These have become popular in the UK as they comply with stringent regulations. “It hasn’t become a popular product in Australia because our codes for combustibility are quite unclear,” says Hanmer. The building industry has been calling for greater coordination between all levels of government on reform for many years. The Building Ministers’ Forum (BMF) commissioned Professor Peter Shergold and

CSS F.A.T. MAG 13

COVER STORY The remains of the Grenfell Tower block in West London.

“Fire should never be able to spread between units and certainly not between floors. If a fire can spread between floors, everything we base our fire principles on are out the window.” Geoff Hanmer, managing director, ARINA architecture Bronwyn Weir in 2017 to provide recommendations to improve building safety and compliance. The report, which was completed in April 2018, also focused on managing the ongoing risks arising from the non-compliant use of combustible cladding. The report also recommended setting up a cladding replacement program. “Getting the combustible cladding off is going to take some time but it’s a real priority,” says Hanmer. “We’ve

14 CSS F.A.T. MAG

got billions and billions of dollars of remedial works that are required across the Australian market. This is a very, very significant failure of regulation.”

SLOW PROCESS

Despite the recommendations, no implementations have been set up by the BMF, that is run by state and federal building ministers who collectively instruct the Australian Building Codes Board. ABCB. “The arrangements are terribly complicated because no one organisation or person is directly responsible for any of this,” says Hanmer, who notes that hundreds of residential buildings are rated as either a moderate or high risk by NSW and Victorian governments. In fact, Neo200 was regarded as only a moderate risk. So, what do tradespeople need be aware of when dealing with cladding? Hanmer says they must ensure the cladding is fixed according to the requirements of the manufacturer. “With the Grenfell Tower disaster, there was a void between the rear

of the cladding and the original side of the building,” explains Hanmer. “This created a chimney effect that was responsible, in part, for the rapid spread of the fire. Unfortunately, it’s possible to install cladding on a building that will effectively spread fire from storey to storey, even if the cladding itself isn’t combustible. “If you create a flue between one storey and the next and the flames access the flue and are confined, when they reach a window on the floor above, the fire will spread between floors. This is extremely dangerous.” The architect also recommends that there should be no ignition sources, particularly on balconies—in other words, make sure barbecues are not near any cladding. “If the fat from a barbecue catches fire, there’s every chance that it could spread to the cladding, even if the barbecue is a distance away.” Like the rest of the building industry, Hanmer is waiting for a national cladding replacement program to be implemented but, so far, no time frame has been set. 

IMPROVE YOUR EFFICIENCY AND REDUCE YOUR GRIP FORCE FATIGUE, BY INVESTING IN AN IMPACT-A CORDLESS APPLICATOR GUN Code: 29016

Key features

LED On/Off Button

• Trigger controlled when precise application is required • Dispense Rate – High : 2.5 - 11 mm/s • Push Force 300kgf max • Can be converted to take a 310ml cartridge

Plunger Release Button

Can Be Converted To Take A 310ml Cartridge Trigger Speed Control

common Key features Across Three Guns • Plunger Release Button • Led Light to illuminate working area • Power locking button to reduce fatigue • Automatic anti drip function • Push Force of 300kgf max

Power Locking Button

7.2V Li-ion Batteries, 2.5Ah

OTHER OPTIONS IN THE IMPACT-A CORDLESS CAULKING GUN FAMILY

600ml Dial Speed Control

310ml Dial Speed Control l ntro d Co e e Sp ds Dial 6 Spee

l ntro d Co e e Sp ds Dial 6 Spee

Kit Components All three come as a kit, which include a 40 minute fast charger, two 2.5Ah batteries and all packed in a solid carry case X2

7.2V Li-ion Batteries, 2.5Ah

Code: 28949

Code: 28950

40 Min Rapid Charger

These cordless tools will increase your productivity while providing you with a quality job. Dial up your flow rate or activate the variable speed trigger to get a consistent placement of caulk or silicon, ensuring a quality seal every time.

PROFILE Armand Lizee came to the Margaret River region for the surf, but stayed to build a home that has picked up multiple gongs in the 2019 Master Builders-Bankwest Housing Excellence Awards

16 CSS F.A.T. MAG

The sand castle

V Above: Builder Armand Lizee. Main picture and below: The award-winning house in Yallingup, Margaret River.

isitors to WA’s Margaret River region can often be heard declaring they never want to leave. Known for its wine, food and beautiful beaches, ‘Margs’ is a major drawcard for both international and domestic tourists. It’s a favourite weekend getaway from Perth, with many city dwellers renting or purchasing beachfront holiday homes and soaking in the Indian Ocean sunset from atop the steep sand dunes. Armand Lizee, a builder and keen surfer from Perth, was one of those frequent visitors before deciding to call Margaret River his home nearly 15 years ago. “I was attracted to Margaret River for the great surf, but it’s just a beautiful place,” Armand says. “We kept coming down to visit on the weekend and never wanted to go back. So eventually we decided to make the move.” A carpenter by trade, Armand wanted to claim his own piece of paradise while making the most of a healthy custom home-building market. “There are some really nice houses down here. Often the intention is to build a beautiful holiday home, and inevitably people end up loving it so much they move permanently.”

A castle in the sand

PHOTOGRAPHY: SUPPLIED

In 2005, Armand started Paradigm Construction, which has earned a reputation for building exceptional quality homes in the South West. Paradigm recently won Western Australia’s top building award for a breathtaking oceanfront home in

Yallingup, about half an hour’s drive from Margaret River. As well as being named Top Home at the 2019 Master Builders-Bankwest Housing Excellence Awards, the project took out Best Country Home and a slew of trade awards for plastering, paving, ceilings, plasterboard linings and external finishes. Resembling a medieval castle set high on a hilltop, the fortress-like home is built to withstand the coastal elements with its formidable exterior dominated by concrete and stone. A heavy, studded double front door leads to interior features including huge wooden exposed beams and a tower staircase. Designed by Spanish architect Javier Barba, it’s a building made to last centuries, yet the level of precision achieves a distinct luxury feel. “The house sits very quietly up on the hill,” says Armand. “The scale of it is huge but you don’t realise it because it’s so tucked away.” That deceptive ‘tucked away’ feeling is achieved by building the house into a sand dune, a technique which presented the project’s main challenge. “Almost half of it is actually underground, so we had to move the sand dune, build the underground part and then bring the rest of the sand dune back to its original position.” Other challenges included building a pool fence out of 20-tonne granite boulders, and importing 3000 tonnes of granite from across the South West. But none of these challenges were enough to put Armand and his team off.

CSS F.A.T. MAG 17

PROFILE

“As soon as I found out the architect was Javier Barba, I had to be involved,” Armand says. “His work is really special.”

It’s all about quality

Armand and his team are “fanatical” about quality and the trades they choose to work with are equally proud of their work. “We generally work with the same trades on every job, so everyone gets used to working together. Trades are chosen based on whether they can work well with the team and whether they ‘get it’. It’s not just about price— it’s about delivering a quality finish every time.” Supervising multi-year, multi-milliondollar builds means Armand can’t be everywhere at once—so he relies on his team to identify any issues that arise. 18 CSS F.A.T. MAG

Above: Resembling a medieval castle set high on a hilltop, the fortress-like home is built to withstand the coastal elements with its formidable exterior dominated by concrete and stone. The interiors, however, are luxurious. “It’s a bit like coaching a football team,” says Armand. “If your players have never played alongside each other before, how can you predict the result? Rather than swapping in five new players every week, we work with trades we know and trust and who share our commitment to quality. That way, we can deliver consistently great results.”

A people-first approach Despite the growing list of prestigious awards, Armand says his proudest achievement is nurturing the careers

of those around him and watching them grow. “I’m just happy to see our tradespeople doing well and becoming experts in their respective fields,” he says. “The plasterer who did the Yallingup house is a young guy whose boss had injured his knee and couldn’t continue, so he took the job on and ended up winning Plasterer of the Year for it. Moments like these make me really proud.” Armand is driven by doing the best job for both the client and himself—and it’s proving a winning formula. “A comfortable home is such an integral piece of the puzzle when it comes to creating a happy life, and I enjoy helping people build homes that reflect who they are,” he says. “When a client thanks you because they’re genuinely enjoying life in their new home, that’s a great feeling.” 

YOUR BUSINESS

Incidents happen, but without insurance, tradies could be exposed to crippling hits to the back pocket.

Why tradies need the right insurance

s a trademan, it goes without saying you know your industry. But you might not have the same thorough understanding of your insurance needs. Not having an in depth knowledge of the insurance market, the exposures you face and the appropriate insurance policies that will mitigate against your exposure can have a significant affect on your business, your livelihood and that of your family. Some examples of a loss a tradesman may face are; l theft of tools from a site or a vehicle l malicious damage l weather perils l public Liability exposures such as; - leaving an electrical cord somewhere resulting in a trip and fall exposure - put a foot through a ceiling - dig a ditch that someone falls in and injures themselves - accidently dig up the phone/ internet lines Even the most cautious tradies can find themselves staring down the barrel of a compensation claim if something goes wrong on a job. This is when it pays to ensure you have the correct insurance in place to mitigate against the exposures and using a trusted broker, with knowledge about your business and the different

Even the most cautious tradies can find themselves staring down the barrel of a compensation claim if something goes wrong on a job. exposures you face can be a great investment in your financial security, and it can save you money and time in the long run. Some of the consequences of not having the correct insurance program in place or setting the correct limits include; l Uninsured exposures, resulting in you being out of pocket for a loss l Under insurance clause being applied by the insurers in the event you have not insured for the correct

replacement values l Exclusions and clauses being applied to the coverage resulting in diminished cover or no cover for losses you may have thought were covered l You will be liable for legal defence costs if you are not adequately covered for Public Liability exposures, or have had exclusions applied (eg sub contractor exclusions) Many tradesmen know they need cover for their tools and equipment, their vehicles and even their business premises, and that Public Liability is an absolute must. But there are other risks and insurances available they may not be aware of where significant exposures are present. Examples include: l Business Interruption, acts like business income protection l Professional Indemnity, if you give CSS F.A.T. MAG 19

advice l Income Protection, Accident and Life covers that protect the individual and Key Person l Cyber Liability, especially with using online payments l Credit Insurance, if your debtors go bust l Management Liability, to protect company directors/officers against personal financial risks Not every business needs every kind of cover however a reputable insurance broker will talk with you about your business and what’s happening in your industry to determine the level of exposure you have and provide you with the appropriate advice to cover off these exposures.  Article supplied by EBM. As one of Australia’s leading privately owned and operated insurance brokers EBM has insurance solutions to suit you. For more information please visit www.ebm.com. au or phone 03 9425 189

Top insurance tips

Pinching pennies isn’t worth the risk when inadequate insurance can leave you exposed to multi-million dollar claims. l Make sure your subcontractors carry their own workers’ compensation and public liability insurance. Insist on obtaining a copy of their certificates of currency. To be on the safe side call and check that the policy is valid and for the amount stipulated. l Carefully read your insurance policies, schedules and product disclosure statements to confirm that the insurance product is right for you. For instance, it’s not unheard of for insurers to exclude claims relating to drop saws for carpenters or restrict cover for glaziers where they’re working above two storeys, but for these provisions to be buried deep in a policy. l Get quotes from all of the available insurers in the market. However, don’t take out the cheapest policy just for the sake of it—it may not save you money in the long run. l Consider using a broker. Brokers do not work for insurance companies— they work for their clients, providing advice on the best insurance options and work to get claims paid. They’re also familiar with the requirements for having claims paid out, which is invaluable for a number of reasons aside the obvious, including the fact that where a claim is declined there is an obligation to disclose the same for seven years. l When researching insurers, check out their claims ratings and don’t go for an insurer with less than a four-star plus rating.

ON-SITE DOCUMENT STORAGE SOLUTIONS FOR EVERY WORKPLACE • Safely and securely store emergency documents such as safety data sheets or manifest documents on site • Doc boxes available in powdercoated metal or tough, robust poly in a variety of styles & sizes • PVC document storage pouches also available to suit vehicles and transport businesses S TO CS E K L OR EA CA M SP LO OR LS UR E F TAI YO TOR DE S 20 CSS F.A.T. MAG

IN STOCK AUSTRALIA-WIDE

The Rocol brand was established in 1953 and began manufacturing in Australia in 1977. The Rocol brand consists of a range of premium quality, technically advanced maintenance service lubricants including yet not limited to Anti Seize products, Metal Working, Food Industry Products, Chain & Wire Rope Lubricants and Speciality products.

140 YEARS OF HISTORY 1878 FOUNDED

1884

1902

1952

1956

1961

RTD Metal Cutting Lubricant

• Suitable for reaming, tapping, drilling, and metal forming • Easily applied to difﬁcult areas • Excellent penetration into deepholes and slots • Prolongs tool and die life • Improves thread and surface ﬁnish Products from Left to right PRODUCT NAME

SIZE

GREA WORKIT ADHESION T NG SUR O FACES

1963

FOR ACCESDIFFICULT S ARE AS

1965

APPLEI ASY CATIO

1995

BEST FOR MVALUE ONEY

CODE

RTD COMPOUND 500g RY551211 300g RY552132 RTD SPRAY 500ml RY550171 RTD LIQUID 5L RY550181 RTD LIQUID

Nickel Anti-seize Spray & Compound

Copper Anti-seize Spray & Compound

• Protects against wet conditions and chemical attack • Provides anti-seize properties up to 1400°C • Prevents seizure during assembly or dismantling under heavy loads • Does not contain sulphur containing additives

• Anti-seize properties up to 1100°C • Excellent Water Resistance • Easy to apply to difﬁcult proﬁles or restricted spaces • Long term protection against corrosive seizure in extreme conditions Products from Left to right except 2.5KG

Products from Left to right CODE

CODE

SIZE

RY480431 500g RY482482 300g RY480441 2.5KG

SIZE

RY480450 500g RY480455 350g

A MUST HAVE PRODUCT FOR ALL MACHINE SHOPS, TOOL-ROOMS & MAINTENANCE DEPARTMENTS

Safe Step® 100 Safe Step® 100 is a single pack, anti-slip surface coating for heavy pedestrian trafﬁc. This durable safety coating is both easy and fast to apply and offers optimum adhesion to metal, concrete and wood surfaces. Product

SafeStep® 100 - Safety Yellow SafeStep® 100 - Dark Grey SafeStep® 100 - Light Grey

Colour

Part Number E460006 E460005 E460004

Pavement Patch A patented hydraulic rapid set cement repair mortar that provides high early strengths, high bonding strengths and precision non-shrink performance. • Fast cure, non-toxic, high strength, easy to use & supplied in a plastic pail Product

Part Number

Pavement Patch E991605

BEFORE

AFTER

SUPPLIER PROFILE Since launching a half century ago, family-owned lubrication equipment company Alemlube has grown from a bit player to a category winning market leader. By Tracey Porter

A slick operation

or some, success occurs organically. For others, strategically. Alemlube creative marketing manager Geoff Barlow, however, believes the secret to surviving 50 years in the competitive construction supply sector comes down to your ability to prove yourself both flexible and adaptable. “While our main focus has been and always will be our customers, our relentless pursuit of innovation and progress results in continued and ongoing improvements in our products, our product range and our internal systems and procedures,” Barlow says. It is a philosophy adhered to by the company since 1970 when Ian Williamson established Alemlube Lubrequip P/L (as it was then known) near the family home in Brookvale, in Sydney’s northern beaches. A salesman all his life, Williamson founded the business after spotting a gap in the market to supply reliable, cost effective lubrication equipment solutions, well supported by a comprehensive after sales service package.

22 CSS F.A.T. MAG

Williamson threw open the doors to the showroom with just a few core products after being appointed the exclusive Australian Distributor for Alemite USA’s range of pneumatic pumps, hose reels and grease nipples.

A new generation

Upon his death in 2007, Williamson’s sons Mark and Ross took the helm as co-directors with Mark leading the sales and marketing side of the enterprise and Ross taking charge of operations and IT. In 2010 the pair changed the company name to Alemlube and in 2014 made their first acquisition, a competitor brand by the name of Tecalemit, which specialises in the design and manufacture of lubrication equipment, fluid transfer, fluid measurement and workshop equipment for the agriculture, automotive, industrial, mining and transport industries. But rather than taking the traditional route and absorbing the business into its existing offering, the brothers reasoned it would make more sense

to retain the status quo by allowing the two businesses to continue to operate independently in their respective markets. Today, the cornerstone of the business remains the supply and service of greasing equipment, drum pumps, flow meters, spill containment equipment, air operated diaphragm pumps and hose reels.

Helping more customers

Barlow says as with the advance in technology, these product groups have advanced in their manufacturing processes while also adding new features, versatility and reliability, all of which has proven of great benefit to the end user. This has had a direct impact on the success of Alemlube as a whole with the company now operating a brand network that includes 150 staff across offices and warehouses across Sydney, Brisbane, Melbourne, Adelaide and Perth. Owning all but three of these properties, the company also services the Papua New Guinea and New

The core of Alemlube’s product offerings remains greasing equipment, drum pumps, flow meters, spill containment equipment, air operated diaphragm pumps and hose reels.

Zealand markets, its success prompting it to open an office in Auckland in 2011 from which it is able to service clients across both the North and South islands. There, as in Australia, the business is split into two separate divisions with the first involving the design, supply, installation and commissioning of lube systems to equipment manufacturers in the contractor, construction, infrastructure, transport, agriculture, mining and oil and gas sectors. The second is concerned with the design, supply, installation and commissioning of air and oil lines and workshop equipment to automotive, transport, hire company, construction, contractor and mine site workshops. This arm of the business also supplies vehicle hoists, tyre changers, wheel balancers, wheel aligners, on car servicing equipment and air conditioning recharging machines to car, light commercial, bus and truck workshops.

“Our sales force is extensive and far reaching. All mainstream active customers are visited on a regular rotational basis and kept up to date with new and existing product information and product development.” Geoff Barlow, creative marketing manager, Alemlube Customer focus

Yet while there is consistency in its products, the same cannot be said of the group which purchase them. Barlow says unlike customers in other business, the typical Alemlube customer is painted “with a very broad brush”. “Ranging from small family owned business to large buying groups consisting of many members some with multiple outlets. The Alemlube customer service team answering enquiries and taking orders on the

phone is the all important first point of contact and each member is fully equipped with product knowledge and equipment solutions advice,” he says. Barlow says the key difference between Alemlube and some of its competitors comes down to the strength of their respective sales teams. With local customer service and sales support on the ground in every state, no other company in the lubrication sector appear to have adequate resources to match it, he says. “Our sales force is extensive and far reaching. All mainstream active customers are visited on a regular rotational basis and kept up to date with new and existing product information and product development. The company also prides itself on prompt after sales service where and when required.”

Golden jubilee

Celebrating its golden jubilee year in 2020, the next 12 months will see the Northern Beaches-based brand continue its frenetic pace, with a new website to bed in and the opening of its new Victorian branch set to eclipse the size of its largest warehouse in Eastern Creek by a staggering 33 percent. While Barlow says the company is not actively looking for new acquisitions, it won’t rule out adding additional resources, noting the company “is always looking to improve its offer” and will expand its workforce if required. CSS F.A.T. MAG 23

Team owner Phil Munday (right) with driver Will Davison have their eyes on the Bathurst 1000 prize.

24 CSS F.A.T. MAG

LIFESTYLE

Milwaukee Racing is back for its sophomore season in the 2019 Virgin Australia Supercars Championship. Team owner Phil Munday takes us inside his race-day garage.

Driving Success: Inside a Supercars racing team

PHOTOS: COURTESY OF 23RED RACING

fter a solid debut season in 2018, the team at Milwaukee Racing is back competing in the 2019 Virgin Australia Supercars Championship, and team owner Phil Munday has his eyes on the top prize. “It’s my life long goal to win the Bathurst 1000 and the Peter Brock trophy,” he says. “I had a great friendship with PB and winning that trophy would be the pinnacle for me.” Munday credits the legendary Mt Panorama champion for igniting his passion for motorsport, and after eight top 10 finishes in 2018, he’s looking for improvement in the team’s sophomore season. “Last year was a learning curve for us. As a new team, we needed to understand what is required to win,” he says. “We took a lot out of

that and know what we need to do better this year. Ideally, I’d like to get a few podiums this year and finish the season in the top 10—hopefully eighth or higher. And of course winning at Bathurst is always my ultimate goal.” With a new Mustang on the track and two-time Bathurst 1000 winner Will Davison behind the wheel, Munday and the Milwaukee Racing team have as good a shot as any of taking out top honours at the iconic race. However, Munday is quick to point out that Supercars success requires a team effort that is bigger than any one person. “We have a team of seven or eight guys that basically dedicate their whole lives to the team. It’s a long season— from February to November—and we’re in a new race location every two to three weeks. It’s a monumental effort.”

And Munday knows plenty about the importance of teamwork. After purchasing his first panel beating shop at the tender age of 19, he went on to build a hugely successful empire of around 100 stores nationally. Now retired, Munday is putting all his efforts into Milwaukee Racing. “When I started the business as a teenager, a customer gave me the best advice I could have ever received— always staff your weaknesses,” he says. “Success is about surrounding yourself with the best people, and I believe I have done that with our racing team. Racing is such an incredibly highpressure environment, and the guys do such a wonderful job of sustaining their performance over long periods of intense pressure.” Munday takes us inside his race-day garage and breaks down the key roles

CSS F.A.T. MAG 25

LIFESTYLE

It takes a full team of managers, engineers and mechanics to run the Milwaukee Racing team.

And if the car is damaged during the race, our manager will jump in to direct the team to get it fixed.”

six hours of intense concentration. We’ll add a second data engineer for those.”

that make up the Milwaukee Racing team.

DRIVER

“It’s the engineer’s job to take all the information from the driver and the data engineer and relate that to the mechanics. The engineer will also look at all the data to get to the bottom of any issues and work with the mechanics to get it fixed.”

TEAM OWNER

“I’m in the garage on race day. I try to stay out of the decision-making on the day, but I’m there to observe how the team is running and will bring up anything I’ve noticed in the debrief. We’ll discuss things as a team and come up with ways to improve.”

TEAM MANAGER

“Our manager oversees how everything is running on race day. He’ll make decisions about things like when to pit.

26 CSS F.A.T. MAG

“Will does much more than just get in the car on race day. There’s a debrief after every track session, and he’ll tell us what he’s feeling in the car. We also collect a lot of data, but it’s Will who is actually in the car, so it’s vital for us know exactly what he’s feeling.”

DATA ENGINEER

“The data engineer is constantly monitoring data that comes in from the car during the race. This is important to catch any issues early and make sure the car is operating at its optimal levels. Long races like Bathurst require up to

ENGINEER

MECHANICS/PIT CREW

“All our mechanics have specific roles, but if there’s an accident or damage to the car, it’s all hands on deck. The mechanics also double as the pit crew during races. It’s a high-pressure environment but we all come together to get the job done.” 

M18 FUEL™ 1" HIGH-TORQUE IMPACT WRENCH WITH ONE-KEY™ (M18ONEFHIWF1-0) The world’s first cordless 1” High Torque Impact Wrench just made it easier to say ‘goodbye’ to compressors and generators. MILWAUKEE® Tool just elevated the productivity for users who fasten up to 44mm (13⁄4") bolts with the introduction of the first and only cordless 1" high torque impact wrench. An incredible breakthrough for cordless power tool technology, the M18 FUEL™ 1" High Torque Impact Wrench with ONE-KEY™ is also the world’s most powerful cordless impact. It utilises advanced M18 FUEL™ technology to deliver up to 2440Nm of nut-busting torque while remaining 3.1kg lighter than the leading corded option currently available. The M18 FUEL™ 1" High Torque Impact Wrench is the epitome of what we’re able to accomplish through M18 FUEL™ cordless technology – it’s not only the first of its kind but it’s also the most powerful cordless impact in the world. This tremendous power breaks down so many barriers on the jobsite and in the shop: Users will no longer need their compressors and generators, nor will they need to spend the time and money needed to maintain them.

True to all M18 FUEL™ solutions, the new M18 FUEL™ 1" High Torque Impact Wrench combines three exclusive innovations – the POWERSTATE™ brushless motor, REDLITHIUM™-ION battery pack, and REDLINK PLUS™ intelligence. However, to deliver the world’s first cordless 1" impact wrench, MILWAUKEE® reengineered the motor and electronics packages to deliver seamless communication with the battery and the best performance catered to this tool and its applications.

28 CSS F.A.T. MAG

ADVERTORIAL

Dayton Superior enters Australian market

ayton Superior is the leading single-source provider of concrete accessories, concrete chemicals, and concrete forming products for the commercial, industrial and multi-residential construction industry. From bar chairs to bridge formwork, from pure epoxies to precast lifting hardware, from clutches to reinforcing connectors, from sealers to splices, from face lifters to form liners … and every product in between, Dayton Superior offers over 17,000 hardworking

products, systems and solutions for all aspects of the commercial concrete construction industry. Dayton Superior has more than 100 years of history and experience in tilt and precast systems. The first tilt up wall was cast in Illinois way back in 1893, and soon after—1901 to be exact— the long and unparalleled pedigree of Dayton Superior began. Dayton Superior is fully integrated, with over 40 manufacturing and distribution facilities across four continents. Within the tilt and precast

Chemicals and accessories to meet all of your precast concrete needs!

Clean Strip™ Ultra J3

T41 Ground Release II Insert

P92J Fleet-Lift™ Edge Lift Anchors

P52A Dayton Superior™ Lift Anchors

concrete arena, Dayton Superior is renowned for offering some of the industries deepest engineering and technical knowhow. Dayton Superior has hundreds of engineers offering you more than 1,500 years of experience, multiple accredited laboratories and more than 120 patents. Dayton Superior Australia is pleased to be able to offer the Australian market our suite of unparalleled solutions from 100 years of experience in global tilt and precast markets and are a proud supplier partner to the CSS Group. 

® ®

F200/F200E Ferrule Anchors

CSS F.A.T. MAG 29

DO YOUR GLOVES MAKE THE CUT? ADVERTORIAL

3KG – HIGHEST LEVEL CUT RESISTANCE. NO BS.

PROCHOICE® ARAX® PLATINUM. PROVEN CUT PROTECTION UNDER THE NEW EN388:2016 STANDARD. CALL 1300 770 723 TO BOOK A DEMO WITH YOUR PREFERRED CSS MEMBER.

ADVERTORIAL

Protect with Bostik Fireban

ire and smoke can cause the greatest damage to any building and in many cases; it leaves the building beyond repair. Aside from the physical damage done to the building, this can also leave behind a significant financial and emotional burden to those impacted by it. Fireban now includes four products that are designed to seal the gaps from

room to room, floor to floor to slow the spread of fire to give people time to evacuate, the fire services time to respond and the owners a better chance at saving their investment. Fireban Fire Protection will fill and seal linear joints and penetrations where air and subsequently fire, could move. The range has applications across various substrates and systems such as

concrete floors and walls, precast and tilt up panels, brickwork & blockwork, rendered masonry, plasterboard and fibre cement sheet. Bostik Fireban range complies with the latest relevant standards and works effectively to slow the spread of fire. Choose Bostik Fireban to protect the spaces in which we live, work and play. 

CUT RESISTANT GLOVE MEETS AUSTRALIAN STANDARDS

new HUNTER C5 cut resistant gloves

“HUNTER C5 offers piece of mind with a Cut 5 Resistant Liner and lightweight polyurethane palm, meeting both EN388:2003 and EN388:2016 standards.”This glove is lightweight to provide dexterity and feel, while structured to be cut resistant. SUGGESTED APPLICATIONS: Sheet Metal and Metal Fabrication & Engineering, Glass/Tiles, Ceramics Handling, Rigging, Landscaping, Demolition, Mining & Construction, Waste Handling/Removal where Cut & Abrasion risks are presented.

» » » »

PROVIDES GOOD CUT RESISTANCE WITHOUT SACRIFICING DEXTERITY DESIGNED FOR PRECISION TASKS AND HANDLING WHERE CUT RISKS MAY BE PRESENT BREATHABLE ULTRA-LIGHTWEIGHT PU [POLYURETHANE] COATING FOR IMPROVED GRIP

EXCLUSIVE TO CSS MEMBER STORES. CSS F.A.T. MAG 31

POWERS AC200 HYBRID ACRYLIC The AC200+ is a two-component, high strength adhesive anchoring system. The AC200+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete base materials and for postinstalled reinforcing bar connections. Suitable for Bonding threaded rod and reinforcing bar into hardened concrete, evaluated for installation and use in dry and wet concrete. The AC200+ is a fast curing system which can be installed in a wide range of base material temperatures which is also qualified for structural applications for seismic and high wind loading conditions.

ETA Option 1 for Threaded rod (M8M30) and reinforcing bar (Ø8-Ø32) for use in cracked, uncracked concrete and post installed rebar connections. The AC200+ also carries a F240 fire resistance for rebar connections and a A+ VOC classification. Applications

•

Structural steel connections.

•

Bridges and tunnels

•

Dams and water infrastructure

•

Seismic upgrades

•

Post installed reinforcing connections.

PDATM

OUR MOST POWERFUL DESIGN SOFTWARE POWERS DESIGN ASSIST™ (PDA™)

The new evolution of PDA software includes a host of innovative features that can help make your job easier. These new features include custom baseplate anchorage, anchor comparisons, anchorage to concrete using post installed anchors, seismic design and designs according to the latest Australian Standard for the Design of post-installed and cast-in fastenings in concrete - AS 5216:2018 and EN 1992-4:2018.

STATE-OF-THE-ART DESIGN SOFTWARE FOR ANCHORING TO CONCRETE

Available to download via powers-guide.com/pda-software

32 CSS F.A.T. MAG

EUROPEAN TECHNICAL ASSESSMENT

ESR-4027 ICC-ES THREADED ROD

SEISMIC LOADING

FIRE RATED

FIRE RESISTANCE

POTABLE DRINKING WATER CERTIFICATION

Pricing available at your local CSS member

AC200+ CONTRIBUTES TOWARD SATISFYING CREDIT 4.1-LOW EMITTING MATERIALS UNDER LEEDÂ®. VOC CLASSIFICATION

CSS F.A.T. MAG 33

ADVERTORIAL

Are your workers safe?

Let’s talk about abrasives in the workplace orker safety is a hot topic in industry today. Companies have had to adjust their procedures and lift their standards to comply with the latest regulations. However, when it comes to abrasives these standards are often forgotten or ignored. By purchasing cheap abrasives with unknown origin and no defined safety standards, you put your workers at risk of injury, or even death. You are also likely to be actually increasing the cost of your abrasive process.

WHY CHOOSE PFERD

PFERD is a founding member of

OsA (The Organisation for the Safety of Abrasives), with research and development that’s dedicated to providing users of abrasives with the safest, best performing and most cost effective products.

PFERDVALUE – REAL VALUE WHEN USING ABRASIVES

No matter the industry segment using abrasive products, Australian workers are seeking real solutions. Abrasives that offer a healthy and safe environment as well as perform. Working together, we can help you with the latest products and solutions.

We are recognised for our range of abrasives, trusted for our quality and sought after for our service and technical know-how. The combination of individual consultation, innovative high performance products and on-site training, have made PFERD into an acclaimed brand for quality abrasives.

PFERD – REAL SOLUTIONS: l Safe use of abrasive training l Onsite abrasive training l Business abrasives audit l Abrasive cost / benefit analysis

For more information, contact your nearest CSS member store.

TOUGH Expanding, Sticks to Everything

GLUE For the Toughest Jobs on Planet Earth®

CSS F.A.T. MAG 35

36 CSS F.A.T. MAG

ADVERTORIAL

Ramset™ ChemSet™ REO502 NEW Ramset™ ChemSet™ REO502 PLUS the latest Chemical Anchoring Epoxy Adhesive from ramsetreid™.

amset™ ChemSet™ REO502 PLUS supersedes the REO502 Jumbo and REO502 Easy Flow products with a new formula which can be installed in Dry, Damp and Wet concrete and even Flooded Holes without any additional loading time. When installing ChemSet Anchor Studs or threaded rod in flooded holes, there is NO reduction in design load. Ramset™ REO502 PLUS comes in an award-winning robust cartridge which is

made in Australia and has been designed for Australian construction conditions. The 600ml cartridge fits easily into the Ramset Universal Applicator Gun, along with our ChemSet 101 and 801Xtrem™ products. Features includes: l ETA l Cracked Concrete l Seismic C1 l use in Dry, Damp, Wet or Flooded holes l Rotary Hammer or Core Drilled Holes l Easy dispensing in cold weather l Low Odour l VOC Compliant l 50 Year Design Life l Long Working Time 

Above: the Ramset Universal Applicator Gun, and right: the ChemSet™ REO502 PLUS

NEW RELEASE

‘THE GLADIATOR TOOLBELT’

• Made from Premium full grain leather for maximum durability • Hand crafted • 4 large pockets • 1 centre pouch

• • • • •

Nail bar holder Tape clip Combination square holder Hammer holder Chisel holder with heavy duty insert

• Numerous smaller pockets • 50mm heavy duty leather belt • Metal Dees included for use with Buildpro shoulder braces (P/N: LWSB01) • Premium quality hardware

PART NO.

BARCODE

DESCRIPTION

LWGLAD

9333608049418

GLADIATOR PREMIUM TOOL BELT

CSS F.A.T. MAG 37

ADVERTORIAL

Don’t risk non-compliance

ustralia has recently introduced a new Standard for Postinstalled Concrete Anchoring. Published by Standards Australia in late 2018 titled AS 5216:2018 “Design of post-installed and cast-in fastenings in concrete”. The new Standard was developed by an expert committee (AEFAC) representing relevant organisations in the fastening industry. This New Standard requires cast-in and all post-installed fasteners to be considered either as safety critical or non-critical. * Safety-critical applications are defined as fastenings where failure may result in collapse or partial collapse of the structure, endanger human life and/or cause considerable economic loss. Non-critical applications would be fasteners into concrete where failure is not likely to endanger human life or result

in a substantial economic cost. The determination of a SafetyCritical Application should be made by the design engineer or the person responsible for the installation if they have the necessary design skills. All safety-critical fasteners must be designed for the appropriate design loads as set out in the National Construction Code (NCC) 2019. Many post-installed fasteners that have typically been used in the past will no longer be suitable for safety-critical applications in cracked concrete. Retailers, you also have an obligation to ask the question of your customers, “are these fasteners being used for a safety-critical application?” as well as educate your customers on their statutory requirements and the need for correct design. For any enquiries on the above information please contact ICCONS your code compliant specialists! 

Wood & Nails

There’s a new Standard for postinstalled concrete anchoring.

Metal

Plastic & Fibreglass

Multi-tool Blades Alpha is pleased to announce a new versatile range of multi-tool blades. Alpha multi-tool blades are great for plunge and flush cuts in a wide variety of materials. They also provide flexibility when working at odd angles, while maintaining core strength, completing difficult jobs swiftly. The Alpha multi-tool product range offers superior blade technology to complete any task with ease and perfection.

for faster cutting & longer life

stays sharper for longer

Universal shank Fits all common multi-tools

Alpha | Will get you home early – again!

38 20190729_Fatmag_Multi-tool_ad.indd CSS F.A.T. MAG

31/7/19 9:10 am

ADVERTORIAL

Clamping up

utton Tools has recently launched FOUR new series of industry-strength clamps.

ONE-HAND ALUMI CLAMPS

This range of four sizes is designed for heavy industrial and professional applications—when you need to hold weighty materials in place. The aluminium alloy body is designed to withstand immense pressure, with a clamping force of up to 350kgs. These clamps feature buffer jaw heads with automatic bounce-back action when released. The bar is made of strengthened carbon steel.

ONE-HAND DUAL CLAMPS In another four-size range, the nylon composite clamp body is strengthened with a carbon steel bar. The Deep V grooved or flat TRP grip pads are

New Lockjaw clamps, from left to right: The 63mm Ratchet clamp; 300mm One Hand Aluminium Clamp; 300mm One Hand Dual Clamp; Parallel clamp changeable, allowing you to clamp different shaped objects firmly without damaging their surface. The dual clamps have a jaw depth of 85mm and provide a maximum clamping force of 200kg.

PARALLEL CLAMPS

Coming in three sizes, our parallel Lockjaw clamp is easily converted into a spreader. Its carbon steel bar allows the clamp to slide quietly while making it a lighter weight and the aluminium alloy clamp body is finished with powder

coating. With large flat TPR pads and a jaw depth of 100mm, the parallel clamp has a maximum force of up to 400kgs!

RATCHET CLAMPS

Finally, we’ve redesigned our standard Lockjaw ratchet clamps and the large 102mm, medium 63mm and mini 38mm hand clamps are now manufactured in robust nylon composite. The ratchet mechanism has an easy release trigger. Each size has V-grooved clamping pads and TPR grip handles for firm handling. 

19mm Chamfer Bit 1/4

M10 & M12 Socket Bit 1/4

HEC Drive Bit 1/4

S2 Alloy impaX® Bit 1/4

HEC EZ Drill Bit #8-14

» ALLTHREAD CHAMFER M3-M16

» ALLTHREAD INSTALL BIT

» MAGNETIC BOOSTER

» SDS PLUS ADAPTOR

» COUNTERSINK TOOL KIT

AXDDPAOM

AXDDPASM

TXDMB

TXDIPAI

TXDEZPK

Bolt Tension | Anti-Vibration | Product Reliability | Traceability

QUALITY FASTENERS SINCE 1935 CSS F.A.T. MAG 39

PUZZLES Monster Crossword 1

107

118

119

108

120

110

111

122

124

146

133

138

147

151

139

144

148

149

153

156

159

160

172

180

187

190

173

174

158

162

175

181

168

182

183

189

191

192

194

196

169

170

176

188

193

40 CSS F.A.T. MAG

161

167

171

195

157

166

179

140

152

155

165

125

143

145

114

129

137

142

164

113

132

136

150

123

128

131

141

112

117

127

130

178

109

121

126

154

101

116

135

103

115

134

100

106

102

105

104

177

163

197

184

185

186

Brought to you by

ACROSS 1. Dream up 6. Ineffectual 11. Self-important 15. Firearm 16. Denture 17. Fashioning 18. Relieve 21. Pencil rubbers 22. Available at premises (2-4) 23. Striking tool 24. University compositions 28. Difficulty 30. Drug addict 32. Penny-pinching 35. Borders on 37. Snooze through alarm (5,2) 38. Under way (of plan) 40. Offence 43. Generators 45. In pursuit of 47. Finances 48. Overlooked 52. Irish Republican Army (1,1,1) 53. Military equipment 56. Set flush with surface 58. Less industrious 60. Nunneries 61. Small ducks 62. Express road 64. Spy group (1,1,1) 65. Toddler 67. Gradually abolish (5,3) 69. Considerable 72. Heavenly 75. Paper rounds 77. Eye part 78. Dry 79. Abate 81. Aviator, Amelia ... 83. Food professionals 84. American lizards 86. Wolf’s cry 87. Utilisation 90. Leotard fabric 92. Twinge (of pain) 93. Grins 95. Funeral procession 96. Hiker 98. Buddies 99. Consume (3,2) 100. Lower leg joint 101. Hurting 102. Thunderous sound 103. Peruse quickly 104. Unit of power 106. Basil sauce for pasta 110. Carved brooch 113. Male children 115. Trounce 116. Cold-blooded animal

117. Patriotic hymn 118. Sleazy gaze 119. Zones 122. N African nation 125. Parsley or mint 126. Retribution 127. Of shipping 129. Stricter 130. Flexible pipe 131. The one here 132. Wine vat 133. India/China continent 134. Douse 137. Apparition 138. Lauded 142. Cloth scrap 143. 2240 lbs 145. Aerosol container (5,3) 146. Wood-shaping machine 149. Rebellious youth 151. Joined forces, ... up 152. Red/yellow mix 154. Inventions 156. Confer knighthood on 157. Receding 159. Houston’s state 161. Mexican dip 163. Herring relative 168. Henpecking 171. Whiff 172. Trembles 176. Secreted amount 177. Sharper 180. Double 181. Electric cord 183. Terse 187. Felt hat 188. Judges, ... up 190. US cotton state 191. Market on TV 192. Proceed (from) 193. Dopey, Doc or Bashful 194. Formed (of conclusion) 195. Water boilers 196. Bullfighters 197. Ringlets DOWN 1. Magazine edition 2. Yawning gulf 3. Frostily 4. Therefore 5. Compensates for 6. Achievements 7. Glacial period (3,3) 8. Out of action (4,2) 9. Throwing weapon 10. Foist (upon) (4,3) 11. Lord 12. Intended 13. Marine world 14. Coward 19. Camera glass 20. At that time

25. Actor, ... Neill 26. Of hearing 27. Sink in middle 29. Healing gel, ... vera 31. Properly positioned, in ... 32. Pig enclosure 33. Cross 34. Slimy gunk 36. 50s bohemians 39. Car distance gauge 40. Arm bone 41. Troubling 42. In truth 44. Beauty queen’s ribbon 46. Travel by bike 47. Trip over 49. Respected expert 50. Beginning of era 51. Warps 53. Lounge seat 54. Liqueur, Tia ... 55. Tidy 57. Sloping (typeface) 59. Michaelmas daisies 63. Adore 66. Giveaway 67. Sacred songs 68. Sometimes, once in ... (1,5) 70. Onto terra firma 71. Hooked (fish) with pole 73. Allow 74. Hire agreements 76. Printed bulletins 80. Stargazers 82. Corrosion 85. Gape stupidly 88. View favourably 89. Choux pastries 90. Parasites 91. Risked 94. Overhanging roof edges 97. Comic actor & director, Woody ... 104. Reneges (on debt) 105. Two’s company, ... a crowd (5’1) 106. Glossy shoe material, ... leather 107. Coarse tobacco 108. Spend freely, ... out 109. Mauve shrubs 111. Horse’s neck hair 112. Extra people 113. Execute on the block 114. Holy day of rest 120. Redecorates 121. Took turns at 123. Cruelty 124. Sundry 127. Worry

128. Last-mentioned 135. Expect 136. Raw 139. Tehran natives 140. Antelope 141. Fencing sword 144. Cab 147. Tallies 148. Fireside shelves 150. Plays (the fool) 153. Highly excited 155. Cosmetics house, Elizabeth ... 158. Beer 160. Greenish blue 162. Land measure 164. Primate 165. And not 166. Solar timepiece 167. Marks of shame 169. So! 170. Kip 172. Rectangular courtyard 173. Claim 174. Exhilarated 175. Cuts timber 177. Flair 178. Precise 179. Internet post 180. Rough sketch 182. Accomplishments 184. Reproach 185. Russian mountains 186. Maples & poplars 187. Current crazes 189. Transmitted

Sudoku 

¬© Lovatts Puzzles

CSS F.A.T. MAG 41

SOLUTIONS

Brought to you by

Sudoku  Top Words

Crossword I S

N G

U M B

A G E

U P

L I P

A G E

H R

S S

C R

A E L

Y I

O N

E T

A M A L

R M O

U D

O N

Q U

N T

H V

E S

N D

A G G

D R

A W N

D O R

N G

O A P

R A

T R

A T

R U

E M A T

Sudoku 

B I

D W

A W A

G H

W E

A R

G E

N G E S

D O

E M

B O Y

G H O S

A M E O

D U

F R

S H

S O R

A N

A M O S

N G Y

D S

I R

O R W A

O R

S S

S I

C S

R M A M E

W A

S O O

A N

S E

E R

T E

O R

R G E

U N D

O A

A M E

D W A

D O R I

E G E

A G

D U

A M M E

O D O U R E

I T

M B

U R

S H

C R

V A

G U

E E

C K

N A

R D

P K

C H

N G E

T S

C O R

R O A

P O M P O U

H O S

T I

I D

R D

E I

L A

E O U

F F

T V

W A E

A G

H O W L

R H

D I

S A

I C

C S

S M

R U

O R

R U N S

A E P

S E

E G

O N

B T

U E

M A G

E E

M42 Cobalt Bi-Metal for longer lasting performance and for cutting harder materials

Demolition blades are extra thick for heavy duty cutting without fracturing or bending

RECIP BLADES 150MM 6" 6TPI QTY 2

Demolition blades 6 TPI for faster cuts

COBALT HSS-Co8

treme

HEAVY DUTY

LENGTH MM INCH 150 6 230 9 305 12

TPI 6 6 6

THICK USAGE MM 1.6 WRECKING & DEMOLITION 1.6 WRECKING & DEMOLITION 1.6 WRECKING & DEMOLITION

PACK QTY 10 10 10

PART NUMBER 7202-0606 7202-0906 7202-1206

WRECKING & DEMOLITION

PACK PART QTY NUMBER 2 7202-0606C 2 7202-0906C 2 7202-1206C 1.6MM THICK HEAVY DUTY BLADE 6TPI 4.2MM PITCH BI-METAL WITH 8% COBALT NAIL EMBEDDED WOOD TO 100MM

M42 Cobalt Bi-Metal for longer lasting performance and for cutting harder materials

1.1mm thick blades provide straight cuts with minimum vibration

RECIP BLADES 150MM 6" 14TPI QTY 2

Fire Rescue & Extrication blades are 14 TPI for cutting pipe, angle iron, nail embedded wood and structural steel

COBALT HSS-Co8

treme

HEAVY DUTY

FIRE, RESCUE & EXTRICATION

LENGTH MM INCH 150 6 230 9 305 12

42 CSS F.A.T. MAG

TPI 14 14 14

THICK USAGE MM 1.1 FIRE, RESCUE & EXTRICATION 1.1 FIRE, RESCUE & EXTRICATION 1.1 FIRE, RESCUE & EXTRICATION

Bordo_Advert_CSS_FATMAG_OctDec2019.indd 1

PACK QTY 10 10 10

PART NUMBER 7202-0614 7202-0914 7202-1214

1.1MM THICK HEAVY DUTY BLADE 14TPI 1.8MM PITCH BI-METAL WITH 8% COBALT METAL CUTTING BLADE

PACK PART QTY NUMBER 2 7202-0614C 2 7202-0914C 2 7202-1214C

26/7/19 4:17 pm

STORAGE DELIVERY & METERING SOLUTIONS For Grease, Fuel, Oil, Air & Water, Waste Oil and Spill Containment

*Applies to the vast majority of Alemlube products unless stated otherwise.

CSS F.A.T. MAG 43

CSS STORE LOCATIONS These stores might all be independent traders, but due to their alliance with the CSS group, they work as a collective and can offer a national distribution opportunity for customers who require it.

CSS member stores are recognised by their ‘Proud Member of CSS sign’ displayed on their building. Be rest assured that the business displaying the sign is a trusted distributor of quality products that are backed by exceptional knowledge, service and support.

If you need a national supply arrangement for your business, contact your nearest CSS member store.

AG & Trade

Broome Bolt Supplies

QLD

Ross’s Diesel Service

Urenco Supplies

Banks Bolts & Fasteners

The Bolt Place Bundaberg

C & L Tool Centre

Flexistrut

Centenary Power Tools

Fraser Coast Bolts

The Tradesman’s Toolbox

THE

TRADESMAN’S toolbox

Brisbane Fasteners & Engineering Supplies

CFI

VIP Industrial Supplies

Jim’s First

WA Bolts

L&T Venables

Warren Electrical Service

CQ Fasteners

Dalby General Steel

Minewarehouse.com

DJ’s Steel & Concrete

Mount Isa Mining Supplies

Bearcon

Mandurah Bolt Supplies

Multi-Fix W.A.

Ortons

NSW No.1 Roofing and Building Supplies

Building Component Sales

Omer Tools Pty Ltd

CFS

Sullivans Mining and Hardware

QLD

Pilbara Tools & Fasteners

Wasps Industrial Supplies

Brands Building & Industrial Supplies

Switched On Electrical Supplies

SA Resources Trading

NSW VIC

NT Fasteners

LM Trade Supplies

TAS

ACT

TJ&H Agencies

Able Air & Power Tools

VIC

Elevate Lifting And Rigging

Flexistrut

The Bolt Barn

Maddison Safety

The Tool Store

MD Steel Fabrication

VEK Tools

Mid Coast Fasteners

yousta

Hallam Bolts

Impact-A Fasteners & Construction Supplies

FASTENERS & CONSTRUCTION SUPPLIES

Build Tech Supplies

TAS

A G M Construction Supplies Geelong & Ballarat

Ferntree Gully Bolts

Independent Fastening Systems

Impact-A Kencor Sales Construction Supply Specialists

Bayswater Bolts

Flexistrut

Melbourne Bolt Co

Kencor Sales

Rapid Supply

Visit Us At: constructionsupply.com.au

Ultimate Fasteners Shepparton & Wodonga