Home Designer & Architect - October 2015 by Jet Digital Media Ltd

HOME-DESIGNER AND ARCHITECT

MAGAZINE October 2015

Solarlux: Merseyside Development Space Pro Contract: The Desire for Better Storage QuickBuild: 5 minute Demountable Container

QUICK BUILD $%-/5.4!",% #/.4!).%23

4HE LARGEST SELECTION OF DEMOUNTABLE CONTAINERS IN THE 5+

!FFORDABLE -OBILE 6ERY 6ERSATILE FROM ONLY

Â£899 +VAT

BUILD IN JUST 5MINS!

BUILD IN JUST 30MINS!

777 15)#+"5),$ 5+ #/- 777 ()2%-!34%23 #/ 5+

5FMFQIPOF &NBJM JOGP!RVJDLCVJME VL DPN "7"*-"#-& /"5*0/8*%&

QUICKBUILD... $EMOUNTABLE CONTAINERS

WAREHOUSES OFFICES s MEN MINUTES NO TOOLS REQUIRED s $ELIVERED FLAT PACKED FOR EASY s COST EFFECTIVE TRANSPORTATION s #OMES WITH LIFTING POINTS AND FORK s BOXES AS STANDARD s 3AVES STORAGE SPACE WHEN FLAT PACKED s 3TANDARD DEAD LOCKING SYSTEM ON ALL UNITS s 3TANDARD DEAD LO s 3INGLE AND DOUBLE DOORS AVAILABLE s %XTENDIBLE SIDE TO SIDE OR END TO END s 3TANDARD IN STOCK SIZES MTRS s LENGTHS X MTRS WIDE ALWAYS IN STOCK s OTHER SIZES AVAILABLE ON REQUEST s 2EADY BUILT EXTERNAL PAINTING AVAILABLE s TONNE LIFTING CAPACITY

"5),$ ). 5.$%2 -).3

1UICK "UILD INTRODUCES THE PERFECT SOLUTION TO ALL YOUR TEMPORARY OFFICE CABIN NEEDS

s )DEAL AS A TEMPORARY SITE OFFICE CABIN s #ONSTRUCTED FROM GALVANISED PROFILE STEEL s &ULLY INSULATED INTERIOR WALLS AND CEILING s (EATING PANELS LIGHTING PACKAGES AVAILABLE s %ASILY TRANSPORTABLE BY FORKLIFT CRANE HAND s 0OWDER COATED $ARK GREEN AS STANDARD s s !VAILABLE SIZES TO BY TO MTRS s %XTENDIBLE END TO END OR SIDE BY SIDE

7AREHOUSES FOR ALL YOUR NEEDS #ALL TO DISCUSS YOUR OWN REQUIREMENTS

3"( METRES HIGH

QUICKSTORE...

3"( METRES HIGH

FROM Â£899 + VAT

!FFORDABLE -OBILE AND 6ERY 6ERSATILE s /NLY A SOCKET SET REQUIRED TO ASSEMBLE s &ROM MTRS LONG BY X MTRS AVAILABLE s MINUTE DISASSEMBLE s &ULLY GALVANISED s .O (IAB #RANE ,ORRY NEEDED FOR LOADING OFF LOADING s 3ELF 3TORAGE 5NLIMITED USAGE WITH A VAST ARRAY OF AVAILABLE s COMPONENTS ACCESSORIES TO SUIT YOUR INDIVIDUAL REQUIREMENTS

CALL NOW FOR A BROCHURE

#/.3425#4 ). 5.$%2 -).3

.!4)/.7)$% #/6%2!'% ,ONDON 3OUTH 3OUTHEAST (1 4ELEPHONE %MAIL INFO QUICKBUILD UK COM

#UMBRIA .ORTH .ORTHWEST 4ELEPHONE %MAIL QUICKBUILDSTORE HERDUSLOGISTICS CO UK

3OMERSET 3OUTH 3OUTHWEST 4ELEPHONE %MAIL QUICKBUILDSTORE INTERLINESERVICES CO UK

*ERSEY 'UERNSEY #HANNEL )SLANDS 4ELEPHONE %MAIL ELLIOT LEFEUVRE PENTAGON JE

'LASGOW %DINBURGH 3COTTISH (IGHLANDS 4ELEPHONE %MAIL QUICKBUILDSTORE CLYDESECURITYCONTAINERS CO UK

Man and Machine Training Academy Man and Machine offer an extensive range of Autodesk 2015 training courses

Man and Machine specialise in Autodesk training for Manufacturers, Engineers, Architects & Product Designers. All courses are taught with the official Autodesk courseware and includes one month’s free post training support. Autodesk AutoCAD courses include: • AutoCAD Essentials • AutoCAD Electrical Fundamentals • AutoCAD Advanced • AutoCAD 3D Drawing & Modelling • AutoCAD Mechanical Essentials

E: marketing@manandmachine.co.uk W: www.manandmachine.co.uk T: 01844 263 700

Connect with us

HOME-DESIGNER AND ARCHITECT

CONTENTS OCTOBER 2015

06 News 20 Kitchens Bathrooms Washrooms 34 External Works & Landscaping 46 Contemporary Home 56 Lifts, Stairs & Balustrades

Publishing Director

01843 595 818

tony@homedesignerandarchitect.co.uk

Shane Mitchell

Publication Manager

01843 581364

shane@homedesignerandarchitect.co.uk

01843 595818

jenna@homedesignerandarchitect.co.uk

Jenna Burridge Editor

INDUSTRY news

New Housing Concept Delivers On-Cost, Quality Sustainable Homes Fast (SIPs), the 4.9m x 11.4m modules can be assembled into units of up to five storeys in detached, terraced, tenement, semi-detached and four-in-a-block configurations giving occupants and housing associations a low-cost, energyefficient solution without compromising on good design and comfort.

Housing decision-makers across the UK can explore the affordable, energyefficient, quick to build volumetric housing solutions brought to market by Üserhuus AG and Tigh Grian Ltd at the BRE Innovation Park in Watford. The world renowned BRE Innovation Park, created in 2005 to trial, test and demonstrate low and zero carbon homes and buildings of the future is now host to two new housing units. These demonstrate the ultimate in superefficient, factory-finished, configurable dwellings built to the Scottish Building Regulation Gold Standard, with one unit having a completely building-integrated photovoltaic roof. At the heart of the project is the volumetric unit, comprising a singlebed apartment or a combination of units forming houses of up to four or five bedrooms. Manufactured in Wales using a structural insulated panel system

Each unit is built, fully serviced, fitted out and decorated practically ready for occupation upon leaving the factory, when it is transported via lorry to be laid on pre-prepared foundations. With EPC B ratings, each unit is fully insulated and heated using a whole house mechanical heat recovery ventilation system, with wall-mounted electric panel heaters. With Üserhuus’ input, there is also the option to replace the tiled roof with an entire photovoltaic “terra cotta” roof and part of the façade. The basic house types aim to deliver very low annual energy bills (estimated at £300-500 per annum for energy and space heating); with the addition of Üserhuus’ technology they could even produce supplementary energy. The overall affordability (cost calculations indicate less than £1000 per sq m), reduction in construction costs and the early delivery of houses for occupation, together with the assured and consistent internal quality, makes for a much more efficient use of development finance and earlier achievement of a revenue stream.

CBI chief blasts Government’s ‘green’ policies

The Confederation of British Industry (CBI) has hit out against the UK Government’s approach to energy efficiency and renewable technology. Speaking alongside the former Vice President of the United States, Al Gore, and the chief executive of Christian Aid, Loretta Minghella at an event organised by the environmental think tank, Green Alliance, CBI director-general John Cridland argued that certainty and clarity of direction are critical to developing long-term business investment in a low-carbon future. In his speech, he praised the steps that had been taken so far in the UK, but also warned that recent changes risk destabilising industry. Cridland said that the UK has “built up real credibility on climate leadership and low carbon investment,” but the roll-back of renewables and mixed messages on energy efficiency meant that the Government “risks sending a worrying signal to businesses.” “We need all countries to pull in the same direction at the Paris Summit [in November] to give firms the certainty and confidence they need to invest in the green economy for the long run. Politicians and negotiators should be confident that business is behind them in securing a lasting climate deal,” he concluded.

Single Ply Roofing Winner!

V for VitrA

Winner of the Single Ply Roofing category at this year’s NFRC National Roofing Awards, the roof refurbishment of the Joseph Black Building, University of Edinburgh, was an extraordinary project completed by BriggsAmasco using a Sika Sarnafil membrane. Sika Sarnafil Membrane S327-15EL in Patina Green was chosen to replace the old roof covering, as the local authority planning department advised that this product was an acceptable replacement for the original copper roofs on the listed building. Work to replace the roof included installing a new timber taper fall once the copper roof was lifted, to improve drainage, which was then covered with the mechanically fastened Sika Sarnafil system. The membrane was applied with standing seam profiles to replicate the original copper roof details. Flawless application of the Sika Sarnafil membrane across an area with complex detailing and upstands sealed the victory for BriggsAmasco at the tenth NFRC Roofing Awards. The project was recognised by the judging panel for the challenges that were overcome during the project and the wholly positive response from the client.

VitrA bathroom products have been chosen for the exciting new luxury hotel M by Montcalm Shoreditch. It is the fifth hotel in the group’s prestigious portfolio and has recently opened. Located near the ‘Silicon Roundabout’ and trendy Hoxton in London, the impressive 23-storey contemporary tower has been designed by 5plus Architects and built by SGP Contracts. Complementing the awe-inspiring rooms, VitrA products have been chosen for all of the new 269 bathrooms and washrooms. The bathrooms have been fitted with VitrA’s high-end M-Line basins and WCs designed by NOA, the German design studio. This award-winning range is sleek and understated and includes many practical benefits. For example, based on research by NOA, the design of the bowl has a very specific depth that minimises the build-up of soap and water residue on the basin’s surface; an ideal choice for hotel spaces.

t6t

INDUSTRY news Church Conversion: Linc Thelen Design and Scrafano Architects

Tallest building using structural cross-laminated timber in Europe completed in London

For a family of five, the designer and architect sought to gut and renovate a building that had been partially converted from a 5,500-square-foot church to a residential space, preserving historic elements of the existing structure while updating the home with modern conveniences. In dividing the cavernous building into a 7-bedroom, 6-bathroom, single-family residence located on top of a separate ground-floor unit, the design and architecture team began by relocating the kitchen to the central nave of the former church. The new, open-plan kitchen, dining, and living area sits beneath 25-foot-high vaulted ceilings and a large, original stained-glass window. A seethrough fireplace connects the multipurpose great room to an additional family room. The architect extended the lofted bedroom area, adding an exposed catwalk and cantilevered staircase. At the building’s highest point, the designer converted an 11-by-11-foot bell tower room, which formerly housed the HVAC unit, into a compact entertaining space with custom countertops, a wine fridge, and clear plastic furnishings. A wood-framed upper addition, clad in sheet metal with a composition shingle-roof, sits atop the original exposed brick. The bell tower was renovated with a glass floor and new windows, offering views of the city. Hickory wood cabinets, white quartz countertops, and 4-inch, white-washed, white oak flooring complete the kitchen, which flows into the living room where the fireplace is clad in white quartz. Other custom elements throughout the home include cabinetry, the kitchen light fixture, stools, an industrial steel door, the dining table, bathroom vanities, and wall coverings.

Hawkins\Brown has completed 49 new homes on Wenlock Road in Hackney, London, UK for Regal Homes. The £10m Cube building, located at 17 – 21 Wenlock Road, has a unique timber/steel hybrid structure and is the tallest building to use structural cross-laminated timber in Europe, with its ten stories reaching a total height of 33ms. The 6,750 sq m scheme, for which Regal Homes won the London Evening Standard New Homes Award for Developments of Outstanding Architectural Merit in 2015, has been designed with a twisted cruciform plan, ensuring each apartment has views up and down the neighbouring canal basin to the west, or across the park to the east. The cruciform layout turns the traditional inward-looking courtyard block on its head, creating four courtyards that face out towards the surrounding city, creating views and improving access to light and air from apartments that have three external walls. 1,190 sq m of commercial space has been created on the ground floor of the development, facing onto Wenlock Road. Alex Smith, Associate at Hawkins\Brown said: “The Cube breaks new ground and demonstrates the great potential of Cross Laminated Timber as a material that enables rapid construction with a reduced environmental impact.”

Simon de Friend, CEO at Regal Homes, added: “The Cube was created to be a pioneer of architectural possibilities, pushing the boundaries of residential construction and developing homes that are also works of art.” To achieve the unique “twisted stack” layout of The Cube, which has floors that cantilever out from the main mass of the building, Hawkins\Brown worked with specialist contractor B+K Structures to develop a CLT and steel hybrid structure built around a reinforced concrete core. The CLT panels and elements of the steel frame were manufactured offsite and brought together for assembly, minimising wet trades and time on site. The CLT panels are set into the steel frame, bracing it to form an integral part of the structure. The hybrid structure makes intelligent use of the best properties of both materials to create a lightweight, strong and modern construction that achieves much lower embodied carbon emissions than an equivalent concrete frame. The elevations of the building have been clad in slatted western red cedar. An open screen of black brick creates an orthogonal grid that wraps around the Wenlock Road elevation of the building, creating a visual harmony with the neighbouring buildings appropriate to the nearby conservation area.

t7t

INDUSTRY news New green-i PIR movement sensor launched

CP Electronics has further extended its green-i energy-saving lighting control range with the addition of a new pushbutton flush mounted PIR movement sensor. Boasting the same functionality as the GESM, its surface-mounted counterpart, the new GEFL-PB product is compatible with all lamp types – including LED – is designed to offer a wide range of features and benefits.

MAD proposes conceptual “vertical village” as alternative to sprawl for LA

Chinese firm MAD Architects has proposed a futuristic housing scheme for LA that features sculptural towers wrapped in gardens and connected by sky bridges. Called Cloud Corridor, the conceptual design calls for nine residential towers that would rise from a single podium. The development would be located on a 9,000-square-meter site along Museum Row – an area in downtown LA with four

major cultural institutions, including the LA County Museum of Art, which Peter Zumthor is redesigning. MAD conceived the housing scheme for the exhibition, Shelter: Rethinking How We Live in Los Angeles, which is on view at the A+D Museum through 6 November 2015. The exhibition coincides with a boom in architecture projects in LA, with major new buildings by Diller Scofidio + Renfro, Renzo Piano and Frank Gehry.

Features include lux level sensing, a range of up to 6 m at a mounting height of 2.8 m, and an automatically-activated movement sensor. The product also has a fully adjustable timer, with a delay of between 1 and 30 minutes. CP Electronics says the GEFL-PB has been designed to be simple to install, and each product comes with a full five-year warranty. Green-i divisional manager Paul Robbins said: “When creating the green-i range, our goal was to offer control solutions which not only looked good but were simple to install and set-up, and made a real difference to energy usage too. The reception among customers has been excellent, with numerous reports of heavily reduced energy bills. We continue to review what customers are seeking from the range, and the new GEFL-PB sensor is a reflection of the desire to further simplify installation via easy push button set-up.” Users can find out how much they can save through investing in green-i technology by using the free energy calculator at www.cpelectronics.co.uk.

t8t

Scottish Expansion for Worktop Specialist Max Top Worktop specialist Max-Top is expanding its business by launching Max-Top Quartz Scotland. Max-Top Quartz Scotland will be the sole distributor of all Max-Top surfaces throughout Scotland and will soon be launching regional training courses to demonstrate the preparation and installation of the unique surfaces. Max-Top’s modular quartz product features a patented interior honeycomb structure meaning the

product is incredibly lightweight while offering maximum strength and offers the aesthetic benefits of a solid stone surface, but with the advantage of a deeper 40mm profile. Since launching in 2014, Max-Top has partnered with many retailers across the UK and has seen its surfaces installed in a wide variety of locations including a number of 5* hotels and university accommodation.

CONTEMPORARY HOME DESIGN

Contemporary home design brings you the best of German produced products at the most affordable prices. When you know it’s made in Germany you know its quality, German engineering is unbeatable and lasts for a life time. At CHD we have cherry picked our German brands to ensure we provide our customers a high end quality product with a great price. Luxury living doesn’t have to be expensive with CHD, you can still have the extravagance of luxury home interior at a reasonable price. Our huge range of German kitchen brands include:- Schuller, Next125, Ballerina, Beckermann, Rational and Kuhlmann. You will not find any Kitchen studio in UK to have more than two German kitchen Brands under one roof – this is what makes CHD stand out from the rest. A German kitchen is a kitchen for life, with a warranty provided by the kitchen manufacturer you have will have nothing to worry about. We are all different, and live in different ways, we have different tastes, ways of life, our personalities, our family, work, our friends… Therefore, each person, each couple and each family needs their own space, their own kitchen.

Each of our projects is therefore different, for people with their own perspectives and specific requirements. That is the reason why, instead of showing you collections from which to choose from, we show you an endless number of design and technical solutions to inspire you to create your own space, your own kitchen. CHD also offers exclusive bespoke made furniture for bedrooms and living rooms; part of the bedroom and living room range we have our Italian designer brand SMA Mobili. SMA Mobili is a leader in the furniture industry that uses the most advanced technology and qualified Italian and foreign designers. Why not visit our website www.chduk.com or follow us on social media facebook.com/ashchd instagram.com/chd_uk for the latest news and updates on Contemporary home design. 0208 472 1144

info@design-home.co.uk 120 WOODGRANGE ROAD, LONDON E7 0EW

The Mergence of Artificial and Natural Lighting to Create Open Space This period house backing onto Richmond Park needed the existing conservatory replaced at the rear of the property; 2PM architects followed the clients brief to both extend and improve the downstairs floor plan to provide an attractive, high quality living space which included a dining area, bespoke kitchen and children’s play area. Glass and lighting to enrich living space

The use of glass and lighting across the entire project creates an extension that feels interconnected with the outdoors; the strong emphasis upon natural light has helped to enliven the interior and brighten corners that would typically have been cast in shadow. Glazing Vision’s fixed Flushglaze rooflights were installed above the seating area and kitchen units; they help to dramatize these two main living spaces within such a large, open-plan extension. Their frameless finish in particular creates an uninterrupted, seamless flow between glass and ceiling. 2PM architects also chose to install up and down lighters within the reveals of each rooflight; this means that in the evenings the rooflights obtain a warm glow from the outside, whilst giving the comforting illusion of lighting up on the inside. The focal point of the project is a completely frameless corner with large sliding glass doors that open up to the back garden. When the doors are opened the dark, contrasting ceiling appears to be suspended, standing alone from any steel framework beneath it. This unique

t10t

feature highlights the architects’ attention to detail; the careful mergence of artificial lighting and glass materials throughout the project has created a consistent relationship between interior and exterior space. Aesthetics and sustainable improvements

A singular sheet of glass for each individual rooflight was vital to the overall aesthetic; therefore Glazing Vision’s engineers worked closely with 2PM architects to deliver bespoke fixed rooflight designs custom made to the correct size. Not only did this increase the amount of light to flood the extension, but a colossal head height was created under each section of glass, approximately by 4 metres. This enabled the glass rooflights to bring light even deeper into the living space. The design also features a green roof; accompanied with thermally efficient glazing from the Flushglaze rooflights, this highly improves the thermal performance and insulation values for the extension, aswell as creating a great outlook from the bedrooms on the first floor.

Achievements

The simplistic colour palette used throughout the design draws our attention to the solid pieces of oak furniture accompanied by strong overhead lighting, elements that carry weight for the entire space. Two main walls have also been constructed with brick to soften the minimalist tones, bringing warmth and texture to the rear property. 2PM Architects’ have not only created an engaging and playful space, but carefully constructed sections within the project build that serve a purpose for the entire family. The choice of positioning and materials used for the interior has helped to enhance exterior features of the property; the beautiful garden can now be viewed from every corner of the extension, bringing further enjoyment to the clients who can sit back and admire the views onto Richmond park. To find out more about design considerations for your project, please call our technical department on 01379 353 741 or request a CPD.

6SHFLDOLVLQJ ([FOXVLYHO\ LQ 3HUPHDEOH 5HVLQ %RXQG 3DYLQJ FRQWDFW#VXUHVHW FR XN ZZZ VXUHVHW FR XN

Timber cladding is becoming increasingly popular for replacing brick or rendered finishes as a warm, practical and sustainable product – but with so many options out there, how do you get it right? Often the process of selecting the right kind of species and the final detailing can be a little off-putting, so in this guide, we’ll explore how you can perfect this process and ensure you pick the correct timber for your project. Which timber? It’s recommended that a durable timber species is used for cladding, with a heartwood durability rating of between one (being most durable) and three (moderately durable), in accordance with the Individual Standards. Western red cedar, European larch, European oak and Douglas fir are among the most popular species to use in cladding as they don’t necessarily require any preservative treatment, since they’re naturally resistant to insects, moisture and rot. On the other hand, species such as spruce, fir and pine have to be treated. This involves impregnating them with chemicals such as boron, which helps stop decay and increases its resistance to fire. While softwood cladding is one of the cheapest, costing around £5-8/m2, if left in its raw state, it can deteriorate

t12t

very quickly. Therefore, it requires regular painting and staining - roughly three coats of stain is needed when first installed. So when this additional maintenance is taken into consideration, softwood is not necessarily the most cost-effective. This makes those species that require no staining or treatment, as mentioned above, much more appealing.

at corners isn’t recommended, as natural movement of the timber will allow the joint to open, causing failure of the surface coating and enabling water to penetrate. You also need great accuracy in measuring and sawing. If you do decide to use mitrecut boards, it’s advisable to provide a gap (about 2mm) between any adjoining surfaces, to allow for expansion.

However, it’s important to note that the sapwood content of timbers is non-durable, irrespective of species, so if present (open to the elements), it will need preservative pre-treatment.

Internal and external corners are more easily detailed on vertical boarding. These can be joined by ‘tonguing and grooving’ to give added stability and protection.

Assembling When it comes to assembly, if you’re dealing tongue and groove (T&G) cladding, the grooves must be faced down to avoid holding water. In non-profiled timber cladding, for boardon-board use, any sapwood present should be placed at the rear of the cladding to maintain the natural durability of the wood. Typically, horizontally-mounted boards are preferable to vertically-mounted ones, as they produce greater resistance to moisture penetration. If you do use vertical weatherboarding, however, the overlap should face away from the prevailing wind. And in either case where the boards overlap, they should do so by at least 30mm. In terms of installing, the cladding boards are fixed to battens, which should ideally measure 50mm deep and be spaced at a maximum distance of 600mm centres. To ensure stability, each board needs to be attached to at least three battens. The devil is in the detail With timber cladding, it’s essential to get the corner details just right. Not only will this look aesthetically pleasing, it will ensure moisture will not seep behind the boards, which can lead to damp issues – and in worse cases, rot. The best way to deal with corners is to assemble a length of timber, which has been cut into at the back to form a V-shape that fits over the corner. The boards then fits snug into this piece of timber, where they meet the corner. Mitre-cutting the boards ends (where both sides are cut at an angle of 45 degrees)

Moisture matters Some types of timber can deteriorate quickly when used outside without a protective coating, as they’re constantly exposed to sunlight and moisture. As the moisture content of timber used externally for cladding often exceeds 20 per cent, it may need to be treated with a preservative. Additionally, a moisture gap (or cavity) behind the cladding is one of the most important steps in the cladding installation - we’d recommend a minimum of 10mm gap at the fixing surface. The purpose of this cavity is to ensure air circulation behind the boards, which prevents a build-up of moisture that would otherwise compromise the durability of your cladding and may result in discolouring/staining of the timber. Finishing touches When assembled correctly, the next step would be to add any preservatives or treatments, if required. Although some hardwood cladding can be left untreated, when installed, it can be oiled to further enhance its durability and life. However, new technology has reduced the need to add preservatives. For example, heat treatments, such as Thermowood and wood-modifying processes, like Accoya, have introduced a new range of softwood products that achieve greater durability, without the use of preservatives. To avoid weathering, a clear or coloured coating can be applied to the timber, which will need to be re-applied every few years. The right timber preservative and finishing will enhance the service life of the cladding and keep maintenance to a low, practical level.

t13t

Neutrik AG 40 Years and 1 billion connectors Neutrik AG, recognized globally as the leading supplier of robust and reliable professional connectivity solutions for audio, video, and data, is pleased to announce its 40th Anniversary. What began 40 years ago as a two-man endeavor in the backyard of an old farm house in Schaan, Liechtenstein is today the leading provider of innovative electrical and electronic interconnection products and systems for the professional entertainment industry. Now, 40 years later, the company can proudly claim “Neutrik is setting standards!”.

eutrik’s footprint is extensive: Whenever there’s a stage, Neutrik products can be found as an integral part of the setup. Wherever there are speakers, instruments, etc. to be plugged in or connected, Neutrik connectivity solutions are on the job. With the company’s innovations in the field of connector products and connector systems for the professional entertainment industry, Neutrik AG has been the ideal partner for clients around the world from its beginning. t14t

In addition to the 40th anniversary 2015 is also the year in which Neutrik produced its 1’000’000’000 connector. After 1983 – when the first million had come off the assembly line – this new milestone means one thousand times more. Due to this impressive number Neutrik can claim without exaggeration to be the market leader in the area of XLR connectors. The success story and production of 1’000’000’000 connectors are based on the corporate philosophy which is oriented on innovation, high reliability and continuity – and have been since 1975.

Company Info: Neutrik AG, headquartered in Schaan/ Liechtenstein, is the leading supplier of professional entertainment connector products like audio, video, fiber optic and industrial connectors, interconnect systems and digital wireless solutions. Neutrik manufactures a wide array of XLR connectors and receptacles, jacks and plugs, fiber optic connector systems, and accessories for a broad range of customers ranging from rock bands to lighting design and industrial equipment to broadcast solutions.

neutrik@neutrik.com www.neutrik.com

5 YEAR <jVgVciZZ

Delivers high traffic performance, prevents peeling or flaking for 5 years

Works on new and weathered wood and for recoating old applications Protects against moisture damage, with excellent adhesion and flexibility

Available in a wide range of attractive colours to bring new life to any decking

Timeguard quality LEDs: the next chapter Buoyed by the continuing success of its NIGHTeye range, which continues to prove that quality counts in the installer market, Timeguard has revealed more new products for winter 2015, with indoor fittings making their first appearance in the range. The new ranges open up huge potential for you as they offer direct replacements for older energy-guzzling designs: 2Ds, halogen spotlights and traditional lanterns. And, as if the energy savings and reliability aren’t enough, Timeguard’s attention to design and detail will make them attractive for use in and around any home or office.

Timeguard, available in black or white, are stylish enough for use in offices and homes, and tough and weatherproof enough for commercial and outdoor use. 12W and 18W models, with a compact footprint for stylish wall or ceiling fitting, there is also the option of a 12w oval version. The Timeguard 3 year guarantee is the icing on the cake.

Engineered for fast, easy installation, with an assured quality from the Timeguard brand, these are a sure revenue earners for wholesalers and installers alike.

Spot the difference

LED-day for 2Ds Now you can offer your customers a direct replacement for 2D fluorescent light fittings with the promise of big energy savings. Where 2D fluorescent lamp fixtures were the go-to energy saving choice of their day, they were installed in their millions in buildings throughout the country: that’s now a massive market ripe for an upgrade to LED. The new super slim LED models from

Halogen up/down spotlights have always been popular with anyone with an eye for lighting design and now Timeguard has brought an LED-ready range to market to provide energy saving opportunities as well as stylish design. A range of high quality metal LED ready up/down spotlights will provide trouble free switching of GU10 LED lamps for years to come – and they carry the Timeguard 3 year guarantee. Stylish and weatherproof, they can be used indoors and out. Fixed, adjustable and up/down versions are offered and there’s a choice of shiny metallic stainless

steel or matte black finish. Halogen bulbs can be fitted if required. ‘Tis (almost) the season With winter approaching, traditional styles of outdoor security lanterns and courtesy lights are more in demand. Not surprisingly, you can rely on Timeguard to deliver the goods with a new range featuring a low energy LED bonus. Timeguard’s new carriage lanterns provides the same instant on brightness that users have become used to with halogen and incandescent lights in the past, and prefer for automatic outdoor lighting. It is fit-and forget, in black or white and with a choice of basic courtesy lights or ones with integral PIR detectors. IP44 weatherproof protection is a given, and there’s even a 4W LED candle lamp included in the box. Of course, when Timeguard says fit and forget, it means it: with a rare 3 year guarantee you have all the assurance of quality and reliability you need. Take control of your LED installations

t16t

Find out more at www.timeguard.com

Timeguard’s latest PIR lighting controller provides all the power you need to manage LED lighting systems. It is rated to switch LED lighting and will manage up to a pretty impressive 140W and is also suitable for 500W fluorescent or up to 2300W halogen incandescent lighting. These stylish new detectors feature a 12m detection range with a wide 180o detection field, adjustable light on times from 5 seconds to 15 minutes and light level adjustment that enables installers to set it up to trigger switching at exactly the right light level in any location. With IP55 rating and a rare 3 year guarantee of quality, it really is specified to be the workhorse PIR controller of choice.

LED Lighting Solutions! Save Money . Save Energy . Save Time

Introducing the new range of LED Outdoor Floodlights from Timeguard. They give instant brightness just like halogens but use only a fraction of the power.

F o r o u r c o m p l e te E n e r g y S a v i n g L E D P IR L i g h t i n g R a n g e . Victory Park, 400 Edgware Road, London NW2 6ND

Sales Office Direct Line: 020 8452 1112

Email: csc@timeguard.com

Three Quarters of Homebuyers Put off by New Build Homes with Poor Storage New research released last month highlights both the growing importance and value of storage and space saving solutions for homebuyers.

n overwhelming three quarters of purchasers find it off putting when new build homes have rooms that lack storage facilities and less than a third believe that new builds have enough design ideas to maximise the living space. Revealing that nearly half of homebuyers would pay up to £5,000 for appropriate storage solutions across a future home, with one in ten willing to invest as much as £10,000, the opportunity for housebuilders could be significant. Commissioned by Spacepro Contract, the new build division of Home Decor, the research, conducted by Vision One Research, demonstrates the increasing role of space efficiency in the homebuying decision. With 51 percent of homeowners stating that storage space was an important factor in their choice of property, ten percent rating it as the most important internal factor when buying a property

t18t

housebuilders should make the most of the space in our new homes through smart and innovative design and a substantial 66 percent of those living in new build homes wishing they’d considered it more when they purchased, the desire for smarter storage is clear. The research also reveals the commercial opportunity for housebuilders with 66 percent of homebuyers agreeing they would pay more for a new home with adequate storage space and 45 percent stating they would pay up to £5,000 extra for a property with built-in storage solutions in all rooms.

The ongoing PR problem new housebuilders continue to face is also prevalent throughout the research results, with 76 percent of recent and prospective homebuyers agreeing that new homes are getting smaller and 75 percent stating they tend to be less spacious than older properties.

Ongoing Concerns about New Build Homes for Modern Needs With 76 percent of respondents believing that the storage in new build homes in particular could better meet the needs of modern households, ongoing concern about living space and the size of our new homes continues, demonstrated by the groundswell in recent years and the Government’s responding and revised Space Standards, released earlier this year and due to go live next month. Storage is inherently connected to part of a wider concern about space generally with 41 percent of homebuyers rating room sizes as the most important factor and 16 percent citing flexible living space. Highlighting ever evolving consumer attitudes towards how we use the space in our homes for modern living, the growing

demand for housebuilders to make the most of the space in our new homes through smart and innovative design is clear. With 70 percent agreeing that new build homes need storage solutions in all rooms, 73 percent finding it off putting when new build homes have rooms that lack storage facilities and just 29 percent believing that new builds have enough space saving ideas to maximise the living space, the gauntlet is down for housebuilders to address this issue.

The current challenges and coping strategies of our householders Bedrooms (44 percent) and kitchens (31 percent) are considered the rooms with the greatest need for storage provision in the home and unsurprisingly are also considered the rooms lacking adequate storage the most, rating at 79 percent and 47 percent respectively. Bathrooms also present an issue amongst homeowners (41 percent). With storage for clothing and footwear the most lacking (69 percent), followed by storage for utility items (66 percent) and occasional use items (63 percent), it’s clear from the research that storage is presenting a problem across the house. For those lacking internal storage space, 40 percent are using a garage or shed on the property, 31 percent a spare room and one in five have no solution, leading to untidy cluttered living, a key issue raised in RIBA’s ‘Case for Space’ campaign in recent years and something that is proven to have an impact on the well-being of occupants.

This is particularly prevalent in new homes with 82 percent of those already living in new build homes having a desire for more storage space, 84 percent believing that their storage space could better meet their needs and over a quarter already utilising external storage options.

The desire for better storage the size of the prize for Britain’s housebuilders 66 percent of all research respondents agreed that they would pay more for a property with adequate storage space, with homebuyers willing to pay up to £5,000 extra (or 3 percent of the property value) for bespoke storage solutions in all rooms, and up to £4,000 extra (or 2 percent of the property value) for uniform solutions. Interestingly, the biggest opportunity for housebuilders could lie with those who paid less than £150,000 for their existing property who would be willing to pay an additional 5 percent of their property value for efficient storage solutions. Existing new homes dwellers are the most willing to pay more for a property with integrated storage solutions (73 percent).

With 51 percent of those surveyed stating a clear preference for built in storage solutions in new build homes, the results indicate that potential purchasers want to be provided with the integrated solution rather than the space to fix the problem and with 66 percent willing to pay for that solution, the opportunity for housebuilders is clear. Max Crosby-Browne, Chief Executive Officer of Home Decor, comments: “The desire for more space in our homes is nothing new, nor the widespread perception that new homes are getting smaller with less provision for living and storage. What is new, is the level of understanding this research provides into the preferences and value of better storage for consumers thinking about buying a new home. “This isn’t about repeating the case for making new homes bigger - that is in the hands of Government and the sector. This is about smarter use of the space that exists and recognising that there is a real value to that for prospective purchasers. “Given the right solution that maximises the usable space within a home, the majority of homebuyers are willing to pay a premium for effective storage within the home. This presents a significant commercial opportunity for housebuilders to not only differentiate themselves in the marketplace but also drive more value out of the homes they are building, the potential of which scales upwards with the property value.”

For further information, visit www.spaceprocontract.com

An online research survey was conducted by Vision One Research, an independent market research consultancy based in London (www.visionone.co.uk). A nationally representative sample of 529 respondents completed the survey, including homeowners (who had bought their property within the last five years) and/ or prospective homeowners (who plan to buy a property in the next five years). The maximum margin-of-error (at the 95% level of confidence) for the total sample of 529 is +/- 4.2%.

t19t

Kitchens,Bedrooms,Bathrooms

NEW BUILD OR REFURBISHMENT

CHOOSE demista™ and Cosyfloor™

House builders, developers, the self build sector, and the public are looking forward to 2016 with a great deal of optimism. The property market appears to be well on the move, and one item is proving to be of great interest to those building or refurbishing houses and apartments.

dded value at minimal cost to any new or refurbished bathroom must the be the inclusion of a demista™ heated mirror pad. This pad is easy to install, and will ensure a steam free mirror at all times, no matter how steamed up the bathroom. The heated mirror pads are available in a variety of sizes, to suit most mirrors and in the case of a particularly large surface, they can be used in multiples. Running costs are minimal and ideally, once wired in to the lighting system, they will gently warm the mirror when the bathroom is in use. The pads can also be fitted in bathroom cabinets.

t20t

The range of underfloor heating products, Cosyfloor™, Ecofloor and Ecomat are designed for specific areas of the home. Both Cosyfloor™ and Ecofloor can be used in every room in the house, including areas where the floor may get wet, bathrooms, shower rooms, kitchens and conservatories. Ecomat can be used in hallways, bedrooms and living areas. Underfloor heating means no unsightly radiators, adding valuable space to smaller rooms, no hot surfaces for toddlers to touch especially in the nursery or playroom. The added space, especially wall space, enhances the aesthetic appearance of your reception and living areas. Whether under timber floors, tiles, slate, marble, vinyl or carpet, underfloor heating is safe, reliable, and offers gentle, comfort heating levels whenever and wherever it is needed. Temperature can be easily controlled via room thermostats to produce the most cost effective and efficient heating. The system is easy to install and maintenance free.

Kitchens, Bedrooms, Bathrooms

INTRODUCING A NEW COFFEE WORLD FIRST

THE JURA Z6 Jura, the leading manufacturer in luxury Swiss made bean-to-cup coffee technology, is proud to introduce its latest innovation yet, the beautiful Z6. This state-of-the-art coffee machine delivers a brand new standard of quality across the whole spectrum of speciality coffees, from the short, fiery ristretto to the popular, mellow flat white. Featuring innovative new technology, this machine guarantees professional quality, barista-style coffee every time and makes it easier than ever to create trend specialities. With a self-explanatory operating concept with many customisable options available, the Z6 is an impressive choice. This machine features a Pulse Extraction Process (P.E.P.) which optimises extraction time to guarantee the perfect coffee every time. To achieve this, the water is precisely pulsed through the finely ground coffee at short intervals allowing maximum flavour to be teased out of the fresh beans. With its compact design, the Z6 looks masterful, proud and harmonious, making it a stand-out feature in any kitchen. For extra convenience, the water tank and bean container can be removed from the front of the machine, along with all other control elements and the Rotary Switch and TFT display make the machine easy and intuitive to operate. This is the first Jura model to allow all specialities to be individually programmed, renamed and duplicated. It really is as simple as ‘turn – press – enjoy!’ It’s equally as simple to care for too, with its milk system cleaning function operating at just the touch of a button and the Intelligent Water System (I.W.S.) automatically detecting the filter. The CLARIS water filters provide optimum water quality and also protect the fluid system against limescale. The Z6’s characteristic, simple lines combined with lovingly created details, such as the cup and water tank illumination, express this machine’s true style and status. Available in Harrods and John Lewis NOW, the new Jura Z6 retails at £1,895.

t22t

For more information, please visit www.uk.jura.com

rrp £1895.00

A world first: P.E.P.© from JURA

Pulse extraction process produces the perfect espresso The new Z6 from JURA harnesses the genius of Swiss innovation to take the automatic coffee machine to the next level. The Pulse Extraction Process (P.E.P.©) optimises the extraction time to guarantee professional quality, barista-style coffee every time. The machine automatically switches between milk and milk foam, making it easier than ever to create trend specialities. The water tank, bean container and all control elements can be conveniently accessed from the front, while the Intelligent Water System (I.W.S.®) automatically detects the presence of the water filter.

Available from Harrods JURA Concession, harrods.com, John Lewis and juraproducts.uk

www.jura-z6.com

JURA - If you love coffee

kitchens, bedrooms, bathrooms

AQUALUX launch AQUA 25 A New Sleek Low Profile Shower Tray Collection The Fetim Group constantly monitor market and design trends. Current market forecasts value the UK shower tray market at ÂŁ37million. 25mm high trays have been on the market for just over three years and have very quickly established themselves across the trade and retail markets, with predicted growth to 30%.

he company believe the growth in the low profile sector is due to the demand from consumers for a wet room look or those wanting the walk in shower effect in their homes. In response to the growing trend for a wet room look and the shift towards low profile trays Fetim UK have launched an extensive range of stylish 25mm low profile shower trays under the Aqualux brand. Fetimâ&#x20AC;&#x2122;s product development team researched the best possible manufacturers that deliver both the quality, durability and design aesthetics that will meet all customer expectations, both from a budget perspective and performance. Aqualux new 25 mm sleek low profile shower trays are technically advanced, particularly with regard to water drainage which makes them suitable for use with all shower types including power showers. They have under gone rigorous testing. The trays have been designed with a dedicated high flow, self cleaning vortex waste unit which is engineered to drain water away quickly and efficiently. All of the trays have been tested and have a flow rate of over 33 litres per minute. Aqualux 25 low profile trays are manufactured in the UK from the finest natural raw materials. There are no plastics or acrylics used in the construction of the trays just 100% pure natural stone resin. Each of the shower tray ranges within the collection have a tough high gloss get coat surface adding durability and making them easy to clean. Launching three new contemporary designs, positioned in terms of good, better and best. The Aqualux 25 UK Collection is available in a choice of nearly 70 different sizes, which are suitable for both commercial and residential installations.

t24t

AQUA25 Sphere, an attractive 25mm minimalist shower tray with its own dedicated high flow 90mm chrome dome waste unit. It is available in 20 different sizes ranging from 800 x 800mm to 1700 x 900mm. AQUA25 Sphere has been designed for ultra low profile fitting but also has both a leg and panel set option for easy fit installation. Compatible waste is available separately.

kitchens, bedrooms, bathrooms

AQUA25 Reflection, offers more advanced design technology. At 25mm high this product can be fitted as a normal shower tray or flush with the tiled floor for level threshold entry, making it suitable for wheelchair access. Tastefully designed with a centrally located waste to give a symmetrical look, together with shallow fall angles create a virtually flat surface and provides a genuine wet room alternative without the associated costs and fitting issues. Available in a wide choice of sizes giving the customer greater flexibility to make the most of the accessible space. Shower tray dimensions range from 800 x 800mm to 1700 x 900mm in square, rectangle and quadrant shape designs. High flow vortex waste included

AQUA25 Definition offers market leading design features in water entry and capture. It is beneath the unique 75 x 300mm stainless steel flush fitting waste grid that the superior technology of the tray is employed. Advanced micro water management directs the water flow at the correct velocity through a unique waster flange; effectively the water is drawn from the surface of the tray by the vortex created within the waste unit. The practically flat surface allows the shower tray to be installed flush to the floor for threshold entry and like AQUA25 Reflection is suitable for wheelchair access. Available in sizes from 900 x 900mm to 1700 x 900mm The AQUA25 Definition shower tray is elegantly designed providing a modern timeless look. With its sophisticated sharp, clean linear shape, and integral stylishly grate that has incredible drainage capacity it is the ultimate choice.

The new Aqualux 25mm low profile shower tray collection is available in square, rectangle, quadrant and off-set quadrant designs providing real choice to the consumer. Manufactured in the UK, from 100% stone resin the shower trays are tested to over 33 litres per minute. They fully comply with EN274 European standard flow rates. Aqualux shower trays are supplied with a tough and repairable gel coat surface and come with a 12 year guarantee.

t25t

Kitchens, BEDROOMS, BATHROOMS

Great design, German quality and the timeless appeal of pure stainless steel Rieber products are designed by catering professionals to provide uncompromising high quality and value for money. Manufactured to the highest standards of German engineering by Rieber GmbH & Co. KG – the inventor of gastronorm (GN) cookware and also the world’s largest manufacturer – Rieber quality matches and even exceeds many of the major brand names, at more affordable prices. UK sales and customer support is provided by a dedicated team based in Wiltshire. Find out more at www.bglrieber.co.uk

Rieber Teppanyaki Pan

Thermoplate® stainless-steel teppanyaki. It seals food extremely quickly and is perfect for quickly cooking meat, vegetables fish and shellfish with the minimum of oil, all the better for a healthy meal. Rieber cookware features highly efficient multilayer SWISS-PLY® construction. An aluminium core is sandwiched between two stainless steel layers resulting in approximately 10-times greater energy conductivity (chilling and heating) than a conventional pan. Perfect for any type hob – from gas and electric to halogen and induction. Free Teppanyaki Pan with every Waterstation Round sink purchased before December 2015!

Rieber’s CUBIC sink also features multi-level preparation areas in the basin, which save space and provide great flexibility. Cubic fits a 600mm base (540 x 332 x 180mm) and is beautifully manufactured featuring small radii corners for easy cleaning. Rieber’s Waterstation CUBIC 980 multifunctional workstation is manufactured in 1.25mm gauge brushed finish stainless steel. Dimensions: 980 x 517 x 175mm.

ROUND OR CUBIC MULTI-LEVEL SINKS Waterstation® Round has a diameter of 902 mm and provides an unusual, eye-catching, social and practical designer solution. Its 3-tier preparation area provides around 3 metres of work surface on just 0.8 m² of floor space. Waterstation® Round can be set at different heights ranging from 920 to 1000 mm and can be situated inline, freestanding or in corners. Also available as a sink only.

t26t

www.bglrieber.co.uk

World-leading centre of design excellence University of Wales Trinity Saint David in Swansea has invested £15 million into the refurbishment, restoration and extension of the Grade II listed former Central Library building to create the new Institute for Sustainable Design. Devised by Powell Dobson Architects, the development incorporates a stunning twin wall façade featuring AluK curtain walling systems, complementing and adding a new dimension to the original design. The modern, double skin façade extension provides additional 657m2, and incorporates a new reception entrance off Alexandra Road, workshops, teaching spaces as well as design studios. The original circular reading room has been restored and made available as a public venue. Yvonne Gibbs, architect, Powell Dobson comments: “Due to the context of the Listed Building, it was imperative that the new extension was as transparent as possible to express the original scale and features of the historic fabric behind. The University was also looking for a truly sustainable solution, to both reduce energy consumption and create an inspiring place to learn.” As the main extension to the Grade II listed building, the twin wall façade runs the full 38 metres of the Alexandra Road elevation. Designed by D2e, a multi-disciplinary engineering and management consultancy, the façade comprises AluK SL60 curtain walling system forming the internal wall, and structurally bonded glazed toughened laminated glass skin forming the outer wall, with an interstitial space between them. “This arrangement provides the transparency that the Listed Building deserves, whilst introducing a number of opportunities for passive climatic control,” says Yvonne Gibbs. “The facade is south facing and therefore through solar gain the space between the two skins heats up naturally. This in turn acts as a thermal

t28t

buffer, which keeps the building warm in winter months whilst promoting air movement and cross ventilation during warmer periods. It also facilitates the introduction of fresh air into the space, which is attenuated through a series of louvers at the base of the facade to temper noise pollution from the busy road outside.” The gap between the internal and external wall allows to control the flow of air and temperature within the building interior, using the air exhaust louver on top and the air inlet louver at the bottom to create a ‘chimney’. In winter, solar gain can be collected in the buffer zone, brought into the building and offset the heating costs, while in summer, when overheating can be an issue, windows can be closed and heat rejected using mechanical ventilation. Banks of bespoke, top hung, open-in AluK 58BW window system are located on the internal wall open and close automatically depending on weather conditions, regulated by sensors located on the face of AluK’s SL60 curtain walling system. Manual operation is also possible to introduce further air. With a visual sightline of 60mm and a mullion depth of 150mm, the SL60 ensures that stringent aesthetic parameters set out by the architect were adhered to. The horizontal Vierendeel members, also designed to incorporate a 60mm face, ensured that the requirement of visual transparency of the main facades was attained. With demanding structural requirements, the 150mm deep mullion was adequate to conclude and surpass the project specification. Internally, the SL60 system seemingly spans 12 metres unsupported between structural columns. The support comes from a bespoke design of the aluminium Vierendeel Truss walkways, fixed at floor positions and supported by hanging stainless steel rods that are structurally retained in tension. These in turn act as a carrier for the glass Brise Soleil blades which run the full width of the building following the spectrum of

features AluK twin wall façade system the rainbow. Yvonne Gibbs continues: “They are multi-functional; environmentally, they protect the occupants and their computers from glare and they reduce over-heating. Their multi-coloured appearance, created in conjunction with a local glass artist from the application of a nano-technology coating, also signals the creativity and aspiration of the University within.” Lee Jones, Senior Design Engineer at System Glaze, the fabricator on the project, comments further: “The SL60 curtain walling system and the external Vierendeel walkway act as a whole; this is the structural design intent, allowing the curtain wall to span over 12 meters - the full height of the lobby unsupported. Implementation and erection of both elements at the same time proved to be difficult and due to tight programme constraints, the required design could not be delivered. The SL60 needed to be installed and glazed prior to the walkway installation, allowing other trades to progress. A series of temporary restraints and connection brackets were specifically design to ensure the curtain wall could handle the definitive wind loadings applied onto the fully glazed SL60 screen.’’ AluK SL52 curtain walling system, AluK bespoke 58BW window system, as well as AluK single GT55 NI and double GT55 NI door systems were specified throughout the rest of the extension:

Access from the interior into the twin wall zone is via a set of AluK double GT55 NI door system at each floor position

Staircase 3: AluK SL52 curtain walling system was specified for a 10m high external wall screen that runs the full building height to enclose the staircase

Roller shutter screen: AluK SL52 curtain walling with double GT55NI door system insert was installed for a 4m x 7m wall screen that shrouds the roller shutter entrance door and provides ventilation via a run of fixed blade glazed-in louvres.

Lift lobby screen: AluK SL52 curtain walling system with single GT55 NI door system insert was specified for an external 4m screen situated on the second floor that encloses the lift lobby.

Slot screen: AluK SL52 curtain walling system was specified for 17m run of curtain walling screen that is situated directly below the main twin wall screen to bring natural daylight into the basement workshop space.

Internal screens – AluK SL52 curtain walling system was used for two curtain walling screens that overlook reception from the ground and 1st floors. The largest of the screens runs 5.5m unsupported and is internally lined with continuous mullion sleeve inserts with steel plates to provide the required structural properties.

Main entrance - A 12m x 12m structurally glazed spider glass system runs full height of the building and full width of the entrance approach, adjoining the twin wall on one side and the existing Grade II listed building on the other. The glass has a low iron with light grey silicone finish to give the appearance of absolute transparency.

The glass wall is structurally supported back to a series of internal 525mm deep, 19mm thick toughened low iron glass blades. The 12m span of the blades was achieved with one joint to minimise the amount of stainless steel bracket components. An over clad entrance box with a double set of armour plate sliding doors provide a main point of ingress into the building, situated centrally within the spider glass wall.

t29t

The Icynene Insulation System

The Icynene Insulation System is a soft, flexible, breathable, foam insulation and air barrier system. Sprayed as a liquid Icynene expands to 100 times its initial volume in seconds filling every nook, cranny and penetration into walls, ceilings and floors. Icynene’s unique formulation sets it apart from other insulation products offering many advantages over traditional insulation materials and more modern alternatives. While all materials of equal thermal resistance perform identically under laboratory conditions the same is not true in real life; some insulation materials off-gas which, over time, diminishes their effectiveness, others allow the passage of air through gaps between them and other building components. Installing

t30t

Icynene ensures no loss of performance and it will remain the same over the lifetime of the building. Minimising air leakage from a building enables the correct design of heating and ventilation systems, saving money on the initial installation and future running costs. Buildings with Icynene installed have easily reached Passivhaus standards for air leakage without the use of membranes and tapes. Needing only a short installation period, Icynene can save you valuable build time and is therefore extremely cost effective compared to other products, not only that but you benefit from insulation and airtightness in one application.

The Icynene Insulation System is 100% water blown containing no toxic chemicals. Icynene doesn’t contain any HFC’s, CFC’s, HFA or HCFC’s and it remains soft and flexible accommodating any normal expansion, contraction or movement within a building. So whether you plan to build, renovate or upgrade the Icynene Insulation System will deliver the performance you can count on for a lifetime of savings and comfort.

wetrooms

wetrooms made easy

wetrooms

A winning combination for wetrooms

wetrooms

MAXXUS WET DECK

wetrooms

BSA MEMBRANE

wetrooms

wetrooms wetrooms

www.wetroominnovations.com 01629 815500

wetrooms

The Maxxus Kit is a third generation deck that takes the wetroom dream to a new level, answering all the deficiencies of existing products. It is the strongest deck on the market, sustaining a 470kg load over joists without any under-boarding, or alternatively set into concrete.

wetrooms

TANKING KIT

UV-PROTECTION OIL Maintains the natural colour of your exterior wood! > Extremely water and dirt resistant > Reduces wood swelling and shrinkage > Does not flake, crack, peel or blister > No sanding for future applications

Clear

Oak

Cedar

Natural

Further information and local stockists can be found via: www.osmouk.com | 01296 481200 | info@osmouk.com

16 Horsted Square, Bellbrook Industrial Estate, Tel: & Fax: 01825 768330 Website: www.appeng.co.uk Email: info@appeng.co.uk

t31t

wetrooms

RMIG CITY EMOTION BALLUSTRADES simple or complex we have the solution. Whether you are working on a large or small project, our vast range of products makes it possible for us to find the best possible solution for you. At RMIG, you have the freedom of choice when it comes to perforated sheets for staircases, balconies or railings and also when selecting the preferred material, whether it is mild steel, aluminium, stainless steel, brass or other materials. Tell us about your requirements and we will find the best possible solution to your needs.

Perforated sheets from stock

Tailor-made perforated balustrades

Visit our homepage and find a broad selection of case studies where architects, contractors and metal specialists have chosen products and solutions from RMIG City Emotion.

In addition to perforating the sheets according to your design, we can provide bending, forming and bolt holes, and what we have started, we are happy to finish for you in the form of natural finishing, powder coating, galvanising or anodising.

t32t

At RMIG, you find one of the worldâ&#x20AC;&#x2122;s largest selections of perforated metal sheets in stock ready for use â&#x20AC;&#x201C; also for balustrades. As well as perforated sheets and expanded metal, we can also offer frame profiles from stock. By fitting a frame profile around a cut standard perforated or expanded metal sheet, you create a smooth edge and make it stronger, safer and suitable for balustrades.

Elegant examples

See more at www.city-emotion.com

RMIG appears on The House That 100k Built RMIG has helped an ambitious couple on BBC TWO show The House That 100k Built to successfully build their dream home in Burnley. The world’s leading perforated materials specialist was shown on the programme and delivered an eye-catching perforated decorative panel that would transform the dull staircase into a striking centrepiece of the home’s downstairs.

ith Wajid and Anam keen to create a unique wow-factor within their six bedroom Burnley home, the couple required a perforated screen that would further enhance the aesthetically pleasing nature of the large hallway and complement the other areas of the glamorous home.

RMIG worked very closely with Wajid and Anam during the consultation period and specified a 3mm thick aluminium screen featuring Islamic script that was extremely personal to the couple. Using its innovative ImagePerf technology, RMIG expanded on Anam’s artistic designs and produced a stylish and tasteful floor to ceiling perforated screen, finished in a RAL 1036 Bronze Satin polyester powder coating. With the couple’s time and budget constraints in mind, RMIG delivered the high quality and stunning screen in a cost and time effective manner, much to the

appreciation of Wajid and Anam who were keen to move into the finished home with their new born baby at the earliest possibility. The metal screen received positive reviews from both a delighted Wajid and Anam, who commented on its uniqueness during the show, transforming what would otherwise have been dull and wasted space into something fantastic. RMIG can perforate sheet metal to meet any desired style, producing limitless designs and patterns to achieve unique and attention-grabbing architectural visions. To learn more about RMIG and its full service offerings, please visit the RMIG website. The House That 100K Built is produced by Remarkable Television, part of Endemol Shine Group.

t33t

External Works & Landscaping

Verandas, Glass Verandas and More! Verandas are versatile structures that can add significant value and style to your property. Adding a veranda to your home can completely transform your living space and the way you use it. Adding a veranda to your home can completely transform your living space and the way you use it. At 123v Plc we design, manufacture, and install high quality, purpose-built cantilever and traditional glass verandas for families and commercial companies nationwide. Our products are designed and made in Great Britain. Our fully engineered structures feature quality materials and fittings, to help you ensure structural stability while improving the aesthetic appeal of your home. Maximise the versatility of your outdoor area by tailoring your veranda design specifically to your lifestyle and property. Your preference can be contemporary, Victorian or to match existing wrought iron work.

t34t

At 123v, our aim is to enhance your outdoor living and functional space with a stylish handcrafted structure that will last for years to come. All our veranda designs, including elegant garden verandas and patio verandas, can be used for an array of purposes including restaurants and hotels. Whether you are entertaining friends, dining outdoors, or require a shaded place for the children to play in summer or on rainy days â&#x20AC;&#x201C; the options are endless. Moreover, as a CHAS accredited and Local Authority Building Control Partner, we are experienced in the different aspects of design, manufacture and installation of open-sided structures like carports, verandas, canopies and covered walkways.

Verandas were added to our 123v range in 2010. The patented luxury glass verandas from our Ornate Designs range now account for a significant number of the companyâ&#x20AC;&#x2122;s installations. The cantilevered aluminium supports can be finished in any RAL colour, including the glazing bars system securing toughened glass. The unique integrated guttering system makes for an aesthetic appeal complemented by the optional lighting, heating and audio speaker facilities. All our products come with a 10 year guarantee. The beautiful Ornate Designs Glass Veranda range was first shown to the public at the BBC Gardeners World Live show at the NECC Birmingham in summer 2011. The presentation was an outstanding success and 123v was awarded the Gold Sundry Award from the show judges. We were then asked to exhibit at the Grand Designs show and many others throughout the UK. Since then, the number of bespoke veranda installations has grown steadily and these beautiful structures can now be found in many secluded gardens and patios around the UK.

Look out for our new development in domestic and commercial energy saving solar panel verandas on www.123v.co.uk

" $PNQBOZ 1SPEVDUT

" $PNQBOZ 1SPEVDUT " $PNQBOZ 1SPEVDUT " $PNQBOZ 1SPEVDUT

#VJMU UP -BTU #VJMU UP -BTU #VJMU UP -BTU #VJMU UP -BTU

PAT I O C A N O P I E S & G L A S S V E R A N D A S PAT I O C A N O P I E S & G L A S S V E R A N D A S XXX W DP VL WFSBOEBT PAT I O C A N O P I E S & G L A S S V E R A N D A S XXX W DP VL WFSBOEBT

T IXXX W DP VL WFSBOEBT O C A N O P I E S & GLASS VERAND

X W DP VL WFSBOEBT

External Works & Landscaping

QuickBuild Britainâ&#x20AC;&#x2122;s only demountable container that can be built without tools, by two operatives in just 5 minutes!

n the rapidly expanding and fiercely competitive market of portable containers, national distributors QuickBuild have been successfully supplying demountable containers to the building industry for over ten years. With depots in London and Devon, both branches of the company have recently relocated to new larger premises as QuickBuild expands in line with growing demand for their products. The secret to the success of the company lies in the quality of the QuickBuild range. QuickBuild containers are built to the highest standard but they are still surprisingly simple to use. The units are totally unique in that the only components used to fasten the whole container together are four spring clip pins. Yet the containers remain very stable and resilient keeping the contents dry safe and secure. Additional security measures can be fitted for greater peace of mind. Using either a crane, lifting from the roof, or a forklift, lifting from underneath with the forklift points, the container can be transported with up to an incredible 3 tonne load, or upgraded for a 6 tonne load. t36t

All the units are galvanised with a five year guarantee and are fully CE tested for lifting safety. For many years QuickBuild containers have proved popular within the construction industry, but increasingly QuickBuild are finding the flexibility in use of the units makes them the ideal solution to storage problems in almost any application, above or below ground particularly where space is an issue. QuickBuild containers are produced in the standard sizes of 2.1 x 2.1 x 2.1 metres through to 6.1 metres in length, but with the option of connecting units side to side, or end to end, their versatility means they can meet virtually all requirements. In addition bespoke Containers and Warehouses are made to order to your specifications, are available on request. QuickBuild have produced a DVD demonstrating the unique construction method of their containers in real time. For a copy of the DVD or further information on the range of QuickBuild products please contact us 0845 638 1414 or fill in our simple enquiry form, Email info@quickbuild. uk.com or download The full Catalogue &

DVD from our Website www.quickbuild.uk.com

QUICKBUILD... $EMOUNTABLE CONTAINERS

WAREHOUSES OFFICES s MEN MINUTES NO TOOLS REQUIRED s $ELIVERED FLAT PACKED FOR EASY s COST EFFECTIVE TRANSPORTATION s #OMES WITH LIFTING POINTS AND FORK s BOXES AS STANDARD s 3AVES STORAGE SPACE WHEN FLAT PACKED s 3TANDARD DEAD LO s 3TANDARD DEAD LOCKING SYSTEM ON ALL UNITS s 3INGLE AND DOUBLE DOORS AVAILABLE s %XTENDIBLE SIDE TO SIDE OR END TO END s 3TANDARD IN STOCK SIZES MTRS s LENGTHS X MTRS WIDE ALWAYS IN STOCK s OTHER SIZES AVAILABLE ON REQUEST s 2EADY BUILT EXTERNAL PAINTING AVAILABLE s TONNE LIFTING CAPACITY

"5),$ ). 5.$%2 -).3

1UICK "UILD INTRODUCES THE PERFECT SOLUTION TO ALL YOUR TEMPORARY OFFICE CABIN NEEDS

7AREHOUSES FOR ALL YOUR NEEDS #ALL TO DISCUSS YOUR OWN REQUIREMENTS

3"( METRES HIGH

QUICKSTORE...

3"( METRES HIGH

FROM Â£899 + VAT

CALL NOW FOR A BROCHURE

#/.3425#4 ). 5.$%2 -).3

.!4)/.7)$% #/6%2!'% ,ONDON 3OUTH 3OUTHEAST (1 4ELEPHONE %MAIL INFO QUICKBUILD UK COM

#UMBRIA .ORTH .ORTHWEST 4ELEPHONE %MAIL QUICKBUILDSTORE HERDUSLOGISTICS CO UK

3OMERSET 3OUTH 3OUTHWEST 4ELEPHONE %MAIL QUICKBUILDSTORE INTERLINESERVICES CO UK

*ERSEY 'UERNSEY #HANNEL )SLANDS 4ELEPHONE %MAIL ELLIOT LEFEUVRE PENTAGON JE

'LASGOW %DINBURGH 3COTTISH (IGHLANDS 4ELEPHONE %MAIL QUICKBUILDSTORE CLYDESECURITYCONTAINERS CO UK

Button-fix — the, award-winning, secret fixing for panels and more… For all Architects, joiners and designers reading, if you aren’t already using this unique fixing system, ButtonFix can be used in a variety of situations. A flush fix for panel to panel connection, a bonded fix where screw fixing is not possible and connecting parallel panels. The Buttonfix connectors will provide you with a strong and secure system, which can also allow for alignment adjustment. With a very simple button and socket system which is literally snapped together to connect and the opposite to release, you know the connector and socket are engaged by an audible click. Button-fix is designed to be incredibly strong, having been produced in tough nylon and has been tested and certified by independent test house ‘Sandberg.’ As well as being very simple to fix, it allows for the panels to be removable and reconfigurable at a later date. The connectors are provided with Button Marker Accessory Tools, to make the whole process easier. With four different varieties there is sure to be a solution for you, to find out which is best you require just visit www.button-fix.com, There is a full how to guide on the site with videos, diagrams and photographs to provide any help needed, although the system is pretty straight forward. If you would like to see the full product range, find out more or to make a purchase, simply contact Buttonfix on 020 8150 7190 or visit www.button-fix.com You can also see the team on Stand T3/120 at Timber Expo 2015

t38t

External Works & Landscaping

Your guide to ‘Using The Tube’… at Harrogate! F. Ball and Co. Ltd., the UK’s leading manufacturer of flooring adhesives and flooring preparation solutions, will again be showcasing their extensive range of highspecification flooring products at the 2015 Flooring Show, Harrogate which this year will include their ALL-NEW STYCCO FLEX - Rapid Curing Flexible Adhesive.

elivering professional results every time, Stycco Flex is the perfect solution when you need to safely secure Stair nosings, Carpet gripper, PVC cladding, Skirting Boards, Architrave and Trims. It is already proving to be an essential product for the ‘serious’ flooring professional. Stycco Flex will be on show as part of F. Ball’s newly launched ‘Tube Products’ range, which includes Stycco Grip - a gap filling mastic adhesive; Stycco Seal – silicone sealant, and Stycco Bond PU – a rapid set polyurethane adhesive. Each of the updated ‘Tube’ range products are available in easily recognisable pack designs! Why not come to Harrogate and visit Stand B1 in Hall B at the Flooring Show… meet with the F. Ball team and have any flooring related question answered… expertly! You can also see the F. Ball products in action at the Demo Zone 1 in Hall B, being demonstrated by some of the flooring industry’s top installation experts. New Stycco Flex is so good, with its high initial grab and rapid strength gain, it will generally mean that no mechanical fixings are required to suitably sound substrates. So when working on a typical stair nosing installation, using Stycco Flex means you will complete the job much faster without compromising the quality and reliability of the finished job. Stycco Flex even delivers outstanding results when affixing metal stair nosings to metal substrates! Simply visit www.f-ball.co.uk to access their Stycco Flex Product Data information or watch the video and see for yourself. If you’ve already embraced F Ball’s Professional range of flooring products, then you’ll appreciate the working advantage to be gained from using New Stycco Flex every day. Because when F. Ball launch a new product you just know… even before you’ve tried it, that it’s going to be good… very good! Yet another incentive to ‘Use the Tube’ and give Stycco Flex a try…

t40t

20 YEARS of FURNITURE FASHION They’re the best known faces in the UK world of furnishing exhibitions - and after more than 20 years of organising them, Laraine Janes and Theresa Raymond, organisers of the January Furniture Show (Birmingham NEC, January 24-27 2016) have seen furniture trends come and go – and then come back again! Here they take a look back at the changing face of two decades in the world of home furnishings. Back in the early 1990’s the home interiors market was dominated by pine, pine and more pine. Companies such as Ducal reigned supreme, ‘Victoriana’ was still massive and amidst the creativity of our contrived ‘casual clutter’ we sank into three piece suites with floral loose covers. The suite, naturally, had matching cushions and curtains. In this world of shabby chic we watched tellies housed in TV cabinets, stored our CDs and VHS videos in special storage cabinets and ate regularly around a dining room table with matching chairs. In our top-to-toe fitted bedrooms we slept in trendy pine or metal bedsteads. And much of the furniture we bought for the home was made in Britain.

outdated notion of the three piece suite or anything else that smacks of being matched and co-ordinated. We’re much more into ‘unit’ seating (corner sofas), and sofas with ‘chaise longue’ style extensions. The recliner chair has also become significantly more popular along with ‘feature piece’ chairs that help to express our individuality. In the bedroom the fully fitted look has given way to a more practical ‘semi-fitted’ finish which allows our more mobile population to take their prized wardrobe storage pieces with them in the event of a house move.

Out went the clutter, the ornaments, the frippery and the walls full of pictures. In came the sleek and the very, very plain. Walls were plain, floors were plain, curtains were plain and upholstery was plain. It made cleaning easy and homes very ‘sellable’ but hardly distinguished between one house and the next.

So we’re back full circle, to an era of renewed and reinvigorated individualism where the British love of self-expression once again reigns supreme. It’s a whole new take on the chintz-filled world of 1990s but We’ve also returned to the unquestionable testament to the ongoing inventiveness of luxury of the divan bed sleeping experience. the furnishings sector. But this time round, the once boring looking bed has been souped up to become a To see what the future holds, be sure to visit Fast forward 20 years and, after a brief fling visual feast of fully upholstered comfort. THE furnishings event of the year at The with leather upholstery (which, with the rise The Ottoman bed with all that ‘lift up and January Furniture Show at Birmingham’s and rise of imports became significantly store’ space has also returned to favour – NEC. The biggest and best names in British more affordable in the early 2000s) we’re whereas the waterbed, which made a brief furnishings will be showing their latest once again turning to sofas dressed in floral appearance in the 90s, has never quite collections from Sunday January 24 to fabrics amidst a return to homely clutter. enjoyed its promised potential. Wednesday 27, 2016, in Halls 1-5. But, while there is something of a renaissance in British furniture manufacturing, chances are that the sofas or coffee tables we now own have been imported from the Far East or eastern Europe. By far the greatest sea-change of the past 20 years has been the shift of furniture production to offshore locations. Gone too from our homes are the TV and CD/video cabinets as we watch wall mounted, large screen televisions through which we can digitally download our films and stream music from our smart phones. We rarely sit together as a family around a formal dining table, preferring instead to dine casually – and even individually – around a kitchen island unit or with take-aways in front of the telly. Many of us don’t even bother to buy a dining table and the beautifully veneered cabinets we once needed to house the best crockery and glassware have been replaced by chunky, solid oak furniture from overseas. Banished from many homes too is the

t42t

In between the ‘then’ and ‘now’ of home furniture fashions came a stark era of minimalism, best summed up by Ikea’s ‘Chuck out the Chintz’ advertising campaign of the late 1990s.

For further information and a full list of exhibitors visit www.januaryfurnitureshow.com

Stannah: winning access campaigns in Britain When it comes to winning access campaigns, a Stannah Maxilift MRL motor room-less passenger lift has earned its wings in the Battle of Britain Visitor Centre in Folkestone, Kent. Housed in The Wing, the Battle of Britain Memorial Trust’s new building at the Capel-le-Ferne site of the National Memorial to the Few, the 8-person passenger lift brings access for all over two floors of exciting and informative facilities comprising: The Scramble Experience – a hands-on, audio-visual attraction that gives some idea of what it was like for the Few in 1940; a classroom area – to help educate youngsters about this major campaign waged in British airspace, especially the heroism and sacrifice of those involved; and, last but not least, the Cockpit Café, and Viewing Balcony open to views across the Channel. The Wing was designed in the shape of a spitfire wing by chartered building surveyors, Godden Allen Lawn, with Kentbased Epps Construction as main contractor. Nick Hamer, Project Manager for Epps, comments: “We put our passenger lift requirement out to tender with the Stannah Maxilift MRL coming in as the most cost-effective, fitfor-purpose solution. We have used Stannah lift products before and have had Stannah recommended to us within the industry. The Stannah passenger lift is performing to the desired standard and was even used by the Queen herself at the official opening of The Wing.” This EN81-70 compliant lift solution ensures accessibility for all. The lift is housed in an aesthetically attractive, circular structure, with the stairs sited to the left, winding around and behind it. Hydraulically rope-driven in a wall-mounted shaft, the lift operates over a distance of 4180mm, at a speed of .50m/s. The motor room-less capability saves space with the controller located in a landing architrave at ground-floor level. The Maxilift MRL finish complements its environment, with silver-grey interior car walls, brushed stainless steel doors, a silver half-height rear mirror and dark slate floor. For added safety and reassurance, an autodialler allows communication between the lift user and the premises’ staff. As with all Stannah lift products, the Maxilift MRL passenger lift is covered by Stannah’s comprehensive 12 month lift servicing cover, with 6 service visits and continued lift maintenance by the Dartford branch of the London & South East arm of Stannah Lift Services, part of a nationwide network providing comprehensive lift servicing and support.

www.stannahlifts.co.uk

contemporary home

RENOLIT ALKORPLAN - leading the way in world-class waterproof roofing membrane technology. The ALKORPLAN portfolio from RENOLIT offers an extensive range of versatile, synthetic, thermoplastic roofing membranes. An ideal alternative to traditional roofing systems, the RENOLIT ALKORPLAN range is suitable for all building types - whether youâ&#x20AC;&#x2122;re undertaking a new build, adding an extension or simply refurbishing. A hugely versatile solution RENOLIT ALKORPLAN may be installed over an existing failed roofing system providing a reliable lightweight solution. In addition due to its vapour permeability, any water ingress in the old roofing system will diffuse through the new membrane allowing the system to dry over time. The membrane also compliments any existing or subsequent work you may do and offers a smart finished appearance designed to work in tandem with all UPVC accessories. RENOLIT ALKORPLAN as a warm roof system provides thermal performance compliant with the latest building regulations

and its versatility of installation allows it to work across a variety of applications, no matter how challenging or architecturally interesting the roof structure or its pitch (including vertical) may be. Its flexibility allows the membrane to install to all angles and waterproof around any protrusions. Eye-catching design Unlike most roofing products, RENOLIT ALKORPLAN is available in a range of eye-catching colours including stylish greys, traditional coppers, earthy terracotta and shimmering metallic. RENOLIT ALKORDESIGN profiles enhance the visual of the roof to provide the impression of standing seam. Green credentials There is also the option to install RENOLITâ&#x20AC;&#x2122;s ALKOBRIGHT high reflectance membrane; a brilliant white product which offers a reduction in thermal gain and improves the efficiency of photo voltaics. With the addition of RENOLIT ALKORSOLAR, this simple carrier system may be fitted for solar elements without the need for additional ballast or perforation of the roof membrane. RENOLIT ALKORGREEN is also available to provide a full green roof system. Easy installation and maintenance Due to the efficiency and reliability of synthetic waterproofing, only one membrane layer is needed, which cuts down on installation time and weight. There is no reliance on naked flame for installation and RENOLIT ALKORPLAN roofing membranes are either fastened mechanically, adhesively bonded, or loose

t46t

laid and ballasted. All installation is carried out by an approved roofing contractor. Once installed, ongoing maintenance is minimal. RENOLIT ALKORPLAN has a predicted life expectancy in excess of 35 years (BBA approved). To find out more, the ALKORPLAN team at RENOLIT would be delighted to hear from you. With over forty years of experience in creating cutting edge, innovative and industry-beating products you can rely on us whatever your roofing needs. Contact Sheila Bevan on 01670 718283 or e-mail: Sheila.bevan@renolit.com. www.renolit.com/waterproofing-roofing/en/

RENOLIT ALKORPLAN not just a single ply membrane RENOLIT ALKORDESIGN combines the aesthetic appearance of standing seam with the benefits of a reliable synthetic roof through the application of a purpose made extruded profile. Permanent and flexible they follow the contour of the roof surface offering an eye-catching appearance and assist drainage flow where required. RENOLIT ALKORDESIGN profile is available in two different sizes with colours to represent lead, zinc, aluminium, metallic copper and copper green. For further information please call Sheila Bevan on 01670 718283 or e-mail: Sheila.bevan@renolit.com. www.renolit.com/waterproofing-roofing/en/

Contemporary Home

Bespoke Doors Todd Doors’ quality timber doors can bring character and style to any home, development or office. With a wide range of stylish standard and bespoke doors and countless options for design features, structure and character, Todd Doors are sure to provide the perfect door for your needs. The extremely robust design and quality of Todd Doors’ product brings aesthetic and functional values to your house that will endure throughout the years. Todd Doors is the UK’s leading supplier of quality timber doors. A family run business for more than 60 years, Todd Doors boasts an industry leading range of over 450 original designs manufactured

t48t

using the very best timber components from around the world. Todd Doors stock a full range of door furniture and accessories too. Door handles can really make a statement and enhance your door, whilst frames, architraves and skirting can be used to blend or highlight your door with your existing decor. At the forefront of design, with an average stock in excess of 25,000 doors and with every type of timber door imaginable; including glazed doors, fire doors, folding doors, bi-fold patio doors, sliding doors, French doors,

double doors, external doors and door sets; Todd Doors really is a one-stop destination for all your door needs. The fully bespoke service offered by Todd Doors is particularly useful for those projects requiring oversized doors or specific finishes. Door Experts are always on-hand to offer advice and can even work with you on a particular design you have of your own. For a full range of products and services available please visit todd-doors.co.uk or call 0800 987 8667 and speak to a Door Expert who will be happy to help.

TODD

DOORS BEAUTIFUL DOORS

SINCE 1952

Inspirational doors for every home Todd Doors is the UK’s leading supplier of quality timber doors. With 450 designs and an average stock in excess of 25,000 doors, Todd Doors is at the forefront of the door design industry. Our fully bespoke service, specific finishes and vast range of door furniture and accessories, makes Todd Doors truly a one-stop destination.

0208 839 3577 TODD-DOORS.CO.UK ESSENTIALS

CHARLES TODD

Contemporary Home

Home Style from BisleyDircet Lack of storage space is a common challenge for many homes, but thanks to BisleyDirect (from ebonium) you can now enjoy a practical solution for all storage throughout the home. The continual demand for home working has manifested itself in many ways and the use of vibrant colours and sophisticated storage allows for areaâ&#x20AC;&#x2122;s to be defined. BisleyDirect storage solutions are not only compact, but create a feature out of storage needs, whilst keeping spaces clear. With the widest online range of products from small desktop multidrawers through to under desk F-Series cabinets and large storage cupboards they are the perfect solution for de-cluttering and keeping everything place. Featured products include colour BS filing and Multidrawers and note t50t

pedetsals Fill in difficult spaces by combining different height products and styles to solve space dilemmas. Whether its low windows or angled shaped rooms maximising storage can be a challenge but with our extensive knowledge of products and a little inspiration the awkward areas can become a feature of rooms. Choose form a subtle colour palette through to bright fuchsia, yellow, azure or red. The home storage area doesnâ&#x20AC;&#x2122;t have to be defined by the traditional neutral colour, and whilst chalk, cream and

grey create a calming environment a splash of colour to the scheme can add vibrancy and focus to storage. All products are manufactured in the UK and are delivered and installed by ebonium. For more information visit the web site. www.bisleydirect.co.uk For more info call: 01276 536256 e-mail info@bisleydirect.co.uk

Form and function in perfect harmony Great design is not just about looking good, it’s about performance too. Windows and façades that are perfectly watertight; secure entrance doors; sliding, folding and panoramic doors that open and close effortlessly. Schueco UK’s range of aluminium residential systems has what your home needs. Superior quality, unmistakable style. Unbeatable levels of thermal and acoustic insulation. The Schueco Contemporary Living Collection: where everything works in perfect harmony. www.schueco.co.uk

Available in most finishes

Integrated USB Charging 2 amp tablet charger 1 amp phone charger

Our unique USB charging socket can be integrated on most of our plate ranges and finishes. It has a fast charge rate and is a more attractive solution to some other options. Total charging rate is 3 amp via a 2 amp socket and a 1 amp socket, amperage is NOT shared between sockets. This ensures that our Integrated USB charges specific devices quickly and eďŹ&#x192;ciently even when two sockets are in use. ) ' "$# ) "$ " $ ! $ ) "$ $' " $ ! $ ) ( %$!%$ ! ) ( ! # $# & " $ ) $ #$ " ) & ' $ ' $ " $ " "#

0845 812 3838 | enquiries@socketsandswitches.com

www.socketsandswitches.com

for your life for your life for a lifetime

for a lifetime

Spa De La Mare Ltd are the world’s leading manufacturers of fully tiled spas and swimspaswith a choice 30Ltd tileare colours and endless designs Spa Deof Laover Mare the world’s leading creating a unique finish in the pools, suitable for botha manufacturers of fully tiled spas and swimspaswith commercial and installations. choice of over 30domestic tile colours and endless designs creating a unique finish in the pools, suitable for both • All fully mosaiced and insulated commercial and domestic installations. • • • •

50% reduction in running costs All fully mosaiced and insulated Top quality Emaux de Briare porcelain 50% reduction mosaics 25 mminx running 25 mm costs

• Endless Top quality Emaux de Briare • choice of colours andporcelain designs mosaics 25 mm x 25 mm • Many standard shapes • Endless choice of colours and designs • Variable lengths and widths • Many standard shapes • Variable lengths and widths

Tel: 01481 701333 www.spadelamare.com Tel: 01481 701333 info@spadelamare.com www.spadelamare.com

Contemporary Home

Solarlux exceeds expectations at exceptional Mersey Estuary development Solarlux has exceeded the expectations of residents at The Prom Apartments New Brighton – a new luxury housing development in Merseyside.

Solarlux has exceeded the expectations of residents at The Prom Apartments New Brighton – a new luxury housing development in Merseyside. The luxury development has stunning, far reaching coastal views but as such is exposed to the elements, including very high wind speeds. The request by The Neptune Group was for a glazing solution which matched the high-end feel of the development, this meant secure systems which didn’t rattle, offered extensive noise reduction and also protected the building – and its residents – from the elements, whilst allowing full enjoyment of the spectacular views of the Mersey estuary. The SL 25 XXL glazing solution chosen for The Prom Apartments, Town Square, New Brighton is a further development of the SL 25. It is fitted with a carriage that can bear up to 65kg in weight, which mechanically secures tempered safety glass up to 15mm thick. This makes it ideal for use on balconies and highly exposed locations as it exceeds all the relevant increased wind loading requirements, whilst also providing a quiet living space due to its significant noise reduction. This frameless glazing system offers full protection against adverse weather conditions and when the glass panels are 100 per cent open, they also offer a full outdoor experience. The SL 25 XXL was chosen to provide residents with full protection from the elements during inclement weather but to allow natural light to flood through the property on sunnier days, bringing a homely warmth to relax and unwind in. Martijn Venema, Managing Sales Director at Solarlux, said: “The SL25XXL is specifically designed to welcome the atmosphere into buildings; this is obviously a particular selling point when the properties enjoy such stunning views of the Mersey Estuary. It is also able to exceed expectations for such a challenging and exposed location which can experience numerous weather fronts across short periods.” Solarlux also contributed significantly to the design manufacture and fitting of the bespoke balcony balustrades incorporating enhanced strength wind posts to support the substantial structural loadings, whilst remaining an elegant feature. The use of this bespoke SL45 system offers added value to residents of The Prom Apartments, providing an exceptionally safe outdoor lifestyle and allowing true appreciation of the stunning coastal views. Daniel Hynd, Project Manager of the development, said: “The area has been transformed into a top leisure destination in the Wirral, enjoying superb local facilities, an easy commute to Liverpool and a truly cosmopolitan atmosphere, the addition of the brand new homes just shows what a great place New Brighton is to live and visit.” For further information about balcony glazing, call Solarlux on 01707 339 970 or email info@solarlux.co.uk.

t54t

Lifts, Stairs & Balustrades

How does a Platform Lift work? Have you ever wondered what makes a platform lift go up and down? It’s actually not as simple as you may think, as there are three main types of platform lift drive systems, each having their own advantages and disadvantages. Most modern platform lifts are controlled with electrical inputs from the call buttons. These send signals to a central processor unit which initiate motors or pumps as required. Screw and nut drive system The first drive system we’ll look at is the screw and nut system. This works by utilising a steel screw pole which runs the full length of the shaft. A drive nut on the screw is attached to a motor on the platform. The motor turns the nut and depending on the direction of rotation the lift will go either up or down. The installation of this system often requires a supporting wall especially on longer travel lifts in order to stabilise the unit. This system requires routine lubrication of the thread, often done by a self lubricating system. The disadvantages of this system are the wear and tear on the thread of the screw and drive nut. It is usually only possible to glaze three sides of the lift shaft due to one wall being used to conceal the screw thread. Hydraulic drive system The next drive system to look at is the hydraulic drive system. In this system, the lift platform is attached to a hydraulic ram. To move the lift, hydraulic fluid is pushed via a pump from a central reservoir into the ram. The ram extends and the lift rises, to lower the lift, the flow is reversed. The disadvantages of this system are that there is an additional space requirement for a pump and reservoir unit, and also that hydraulic fluid can sometimes give off an odour in hot weather.

Encapsulated chain drive system The final form of drive system we’ll look at is the encapsulated drive system. The key part of this system is the chain which is encased in a highly durable polyurethane plastic casing which guides the chain and ensures that slippage is virtually impossible. A motor and gearbox at top of the shaft turns a driveshaft that the chains are attached to. The chains are attached to either side of the platform. As the driveshaft rotates the chains are either pulled or pushed and hence the platform moves upwards or downwards. The advantage of this system is that its durability allows the lift installer to offer a much longer guarantee on the drive system. It’s also possible to glaze all 4 sides of shaft as chains run in the corners of the shaft. About the author This article was written by Craig Merry, Director at Invalifts. Invalifts specialise in platform lifts for homes and offices. For further information on their product range, please visit www.invalifts.com or for enquiries and advice, you can call them on 0845 468 2543.

t56t

Fully gla

azed MC2000 platform lift from Invalifts with the encapsulated chain drive system

INDUSTRY Essentials

t57t

Lifts, Stairs & Balustrades

or builders and architects working on a project for a client who is in early retirement and starting to find getting up and down the stairs difficult, the Stiltz Lift provides an ideal solution. It is also the perfect alternative to a stairlift but with the distinct advantage that homeowners can choose where the home lift is fitted. For home renovation, having a domestic lift installed allows owners of a property to avoid compromising the look of the staircase with a stairlift, because a home lift keeps the stairs exactly as they were and untouched.

LIFT OFF WITH STILTZ:

THE HOME LIFT THAT CAN BE INSTALLED ALMOST ANYWHERE Stiltz offers a simple way of making a house completely accessible with its innovative range of stylish domestic lifts which can be fitted virtually anywhere in the home.

Unlike most domestic lifts on the market, the Stiltz Lift can be installed in almost any place in the home and it has an unrivalled ability to fit into spaces other lifts simply cannot. This is because there is no lift shaft or load bearing walls required and it does not have to be fixed to the floor. Thanks to its unique dual rail system, the Stiltz Lift is a totally self-supporting structure and there is no need for hydraulics. It is

powered by an electric motor system that is very quiet and housed out of sight at the top of the lift. It plugs straight into the wall using a normal 13-amp power socket. With the cost of designing or refurbishing a home often running into thousands of pounds, having a domestic lift installed can also ‘future proof’ a home. This means that a client who has made a substantial investment in a renovation can be safe in the knowledge that the home lift will see them through to later life if they experience mobility problems. The Stiltz Lift also gives homeowners the WATCH: STILTZ DOMESTIC LIFTS VIDEO freedom to stay in their own homes without having to move house as well as it adding value to a property. Many Stiltz customers enjoy the Stiltz Lift because it has enhanced their lifestyle and provides a more convenient way of getting between floors. The Stiltz Lift is compliant with all European standards and starts at £11,950 (+vat) (including all standard site preparation and installation) and is available in different interior and exterior colours. There is also a wheelchair lifts Stiltz Lift model available which starts from £12,950 (+vat). Standard features include a remote control to call the lift from any floor, a battery back-up, full height light curtain, full or half height doors, obstruction sensors, and the roof of the lift is covered with the original flooring so when the lift is downstairs it does not intrude upstairs. For more information about the Stiltz Lifts range, contact Stiltz Lifts on 0844 870 9087, email info@stiltz.co.uk or visit www.stiltz.co.uk – quoting Home Designer & Architect Magazine.

t58t

Say NO to bathroom Pull-cords Sensors can be fitted behind most materials to suit your particular dĂŠcor!

www.sensor.co.uk Tel: 01548 511498 ~ Fax: 01548 511393

Cavity Wall Protection By Design

SureCav®50 is a moulded, 100% recycled, polypropylene panel with spacer protrusions, forming a 50mm cavity, allowing a stone, slate, brick and flint outer leaf to be built without the need of an additional block leaf. It is fully certificated by the British Board of Agrément. This cavity protection system ensures clean and moisture free cavities with either timber frame or traditional construction.

SureCav®50 is 100% recycled polypropylene Instead of ending up as landfill or incineration material, SureCav®50 is manufactured by injection moulding to produce a building material that shows we care for the environment. By using 100% recycled polypropylene, SureCav®50 reduces the Embodied CO₂ (ECO₂) footprint in new buildings as well as being 100 times lighter than concrete blocks, making site management and movement of materials much easier.

SureCav®50 - a solution to the problem of wind driven rain One of the greatest threats to the integrity of the building structure come from water ingress. The incidence of wind driven rain is much more prevalent in properties closer to the western coast of Britain and any increase in moisture giving rise to wall saturation will require a managed construction. The increased effect of wind driven rain will be particularly relevant where external walls are not designed with a suitable cavity or rain screen. The specially formed panels of SureCav®50 provide a barrier that becomes a “wall” of plastic, shielding the cavity and inner leaf from water ingress, but at the same time proving to be an excellent surface for the construction of the outer masonry leaf. The unique shape of the SureCav®50 pods directs any moisture to the outside leaf, thus protecting the fabric of the building with an approved 50mm cavity instead of the usual 75mm required in high exposure zones. The barrier formed by the panels, locked together by the joining strips, will protect the structure in even the most exposed weather conditions.

Natural stone

Dry Wall appearance

SureCav®50 – a wise choice! Of course, you do not have to only build in high risk weather zones to experience the benefits of SureCav®50. The SureCav®50 Cavity Protection System is currently being used successfully throughout the entire country and is designed to maximise the protection of the cavity whilst providing an excellent surface on which to construct your outer masonry leaf, be it brick, stone, slate or flint.

For more information call us on 01963 34660 or see our website www.surecav.co.uk

t60t

Brick & Flint

PROTECT THE WALLS SureCav®50 protects buildings from wind driven rain, one of the most common sources of moisture affecting buildings in the United Kingdom

Semi-dry stone walling on SureCav®50 cavity backing board

SureCav®50 Cavity spacer system If you are building using stone, slate, brick or flint, then SureCav®50 will save you time and money as well as guarantee moisture free cavities. SureCav®50 can increase the internal square footage of the property by as much as 5% and enable you to maintain a 50mm clear cavity within any exposure zone. The barrier formed by the panels, locked together by the joining strips, will protect the structure in even the most exposed weather conditions.

Building cavity walls with confidence! The “wall” of plastic, formed by the SureCav®50 panels shields the cavity and inner leaf from water ingress. Proving to be an essential construction element in all exposure zones, the unique shape of the pods directs any moisture to the outside leaf, thus protecting the fabric of the building. The SureCav®50 Cavity Protection System is currently being used successfully throughout the entire country and is designed to maximise the protection of the cavity whilst providing the best backing board available to construct the outer masonry leaf, be it brick, stone, slate or flint.

Phone: 01963 34660 Fax: 01963 32441

www.surecav.co.uk info@surecav.co.uk

ADVERTORIAL

Rain Storms bring problems and Unifold provides the answers

he recent storms where a month’s rain falls in less than a few hours are creating major problems for large warehouses. If the gutter systems and siphonic drains are not in top condition they are simply not able to dispose of the vast amounts of water that come from these very large roof areas and these problems are exacerbated if the condition of the gutters has degraded causing leaks. Such were the circumstances at a major Sainsbury Distribution Centre in Northampton and Distribution Hygiene Services Limited (DHS) were tasked with correcting this situation using the Unifold Gutter System manufactured by Ampteam Limited. Dr. Robert Perryment, the CEO of Distribution Hygiene Services Limited (DHS), has created a high level team that are trained to work safely at height in order to ensure that the gutters and drainage systems are fit for purpose in order to prevent water ingress into these buildings. Dr Perryment says “Gutters really need to be inspected and cleaned at least twice a year. Unfortunately, quite often, roof areas are not visited until a problem occurs. On this site, the gutter system had degraded and leaks were about to become a major problem. Whole roof areas cannot be removed to replace the gutter systems without major disruption to the operational requirements of the distribution centre and ‘quick fix’ plastic paint just isn’t an effective answer in the long term. However, we did have an answer to the problem. t62t

The DHS High Level Team

The Unifold® Gutter System is a bespoke system that can be fitted into an existing gutter that now carries a twenty five year warranty. All our operatives have been trained in this system in order to have Approved Contractor Approval and our work is inspected during the refurbishment programme. Ampteam have provided us with an excellent service, carrying out extensive surveys and producing a first class product on time and within budget. They are always on hand to give advice should we meet with any technical details. The only major problems that we have to contend with is the weather itself – you simply can’t work in these gutters if it rains as they become fast flowing rivers.

We will now be going back on a regular basis to keep these gutters clean and serviceable and they will be good for another twenty five years.” For more information on the Unifold Gutter Lining System please call Ampteam on 01384 252777, alternatively visit our web site at www.gutterliners.com or send us an e mail at unifold@ampteam.co.uk Distribution Hygiene Services Limited, Five House Farm Business Park, Sandon Road, Therfield, Hertfordshire SG8 9RE, can be contacted on 01763 287267.

It takes a long time to create perfection.

Once in a while a product comes along and changes everything, from the way itâ&#x20AC;&#x2122;s crafted to the way it works. Products are often copied and many are great ideas that never really see true success in their application. Many years are spent searching for a product that will ultimately surpass expectations, stand the test of time and become recognised as the leader in its field. We created one of those successful products nearly two decades ago and still today it has never been equalled. Why? Because we have never compromised on quality.

UNIFOLDÂŽ Unrivalled excellence in gutter lining technology. www.gutterliners.com

Dear Industry Colleagues

May we please introduce you to ArchitEx 2015, the Annual free-to-attend 2 day Exhibition, May we please introduce you to ArchitEx the Annual free-to-attend 2 day Exhibition, Conference Conference & Networking Reception for2015, the UK Architecture & Building Design Industry. & Networking Reception for the UK Architecture & Building Design Industry. Whether you wish to exhibit with us to sell your products and services or establish new business contacts relationships, visityour to products meet potential suppliers or partners, or attend the Whether you wishand to exhibit with us to sell and services or establish new business conference and debate the potential hot topics in UKorArchitecture & Building Design, ArchitEx contacts to anddiscuss relationships, visit to meet suppliers partners, or attend the conference 2015tooffers in the &industry. discusssomething and debate for the everyone hot topics ininvolved UK Architecture Building Design, ArchitEx 2015 offers something for everyone involved in the industry. 1. The Exhibition 1. The Exhibition For exhibitors, ArchitEx willprovide provide significant and business development For exhibitors, ArchitEx 2015 2015 will significant salessales and business development opportunities opportunities whilst also offering an outstanding networking platform. An anticipated 1,500 whilst also offering an outstanding networking platform. An anticipated 1,500 Architecture & Building Architecture & Building Design Industry professionals from around the UK will converge Design Industry professionals from around the UK will converge on Liverpool, and as such representson a Liverpool, and as such represents a rare opportunity not to be missed. rare opportunity not to be missed. Exhibitors and delegates from all the following sectors will include … Exhibitors and delegates from all the following sectors will include ...

Architects, Construction Companies, Surveyors & Structural Engineers Architects, Construction Companies, Surveyors & Structural Engineers Town, City & County Councils Town, City & County Councils Local Planning Authorities, Town & City Planners Local Planning Authorities, Town & City Planners Housing Associations, House Builders, Suppliers & Contractors Housing Associations, House Builders, Suppliers & Contractors Commercial, Industrial & Residential Property Developers Commercial, Industrial & Residential Property Developers Banks & Financial Financial Institutions Banks & Institutions

2. The Conference 2. The Conference

fullday 2 day conference programme, with 24 24 speakers, will become the leading for the UK for the The The full 2 conference programme, with speakers, will become theforum leading forum Architecture &&Building Design Industry. It will bring delegates together withtogether policy experts, real-lifeexperts, case UK Architecture Building Design Industry. It will bring delegates with policy studies and industry leaders, and will address the latest issues in policy and public affairs, consultation real-life case studies and industry leaders, and will address the latest issues in policy and andaffairs, legislation, campaigns and and issues whilst atcampaigns the same time, highlighting the keyatsuccesses made in public consultation legislation, and issues whilst the same time, design, planning, building and housing. highlighting the key successes made in design, planning, building and housing. Availability thisuniquely uniquely free-to-attend conference is limited so earlyso delegate registrationregistration is highly Availability at at this free-to-attend conference is limited early delegate is recommended. To receive further information about how you can take part, or to tell us what you would highly recommended. To receive further information about how you can take part, or to tell us to would see on the contact us. please contact us. whatlike you likeprogramme, to see on please the programme, 3. The Drinks Reception/ Networking / Networking Evening Evening 3. The Drinks Reception Free–to–attend, complimentary 2 hour champagne drinks reception & networking evening with Free–to–attend, complimentary hundreds of industry colleagues. 2 hour champagne drinks reception & networking evening with hundreds of industry colleagues. ArchitEx 2015 is your opportunity to join the UK’s leading Architecture & Building Design event. ArchitEx 2015 is2015 yourTeam opportunity to3303 join the UK’s leading Architecture & Building Design event. The ArchitEx 0845 467 www.architex2015.com info@architex2015.com

The ArchitEx 2015 Team www.architex2015.com

0845 467 3303 info@architex2015.com

Architects, Specifiers, Building Designers, Surveyors & Engineers Commercial, Industrial & Residential Property Developers Town, City & County Councils, Local Planning Authorities, Town & City Planners Construction Companies, Builders & Contractors Products & Services Industry Suppliers

picture hanging systems ltd

STOP BANGING HOLES

IN YOUR WALL! GET A HANGING SYSTEM. SAVE TIME AND YOUR WALL

EVERY TIME YOU RE-ARRANGE.

YOU’LL BE GLAD YOU DID. www.picturehangingsystems.co.uk 0845 500 70 35

info@picturehangingsystems.co.uk