ICP Research Report 2020 English

Page 19

Research Report 2020

Institute of Computational Physics

2 Electrochemical Cells and Microstructures Fuel cells are a prime example of electrochemical cells. They convert fuels such as hydrogen, natural gas or methanol into electrical energy and heat. Fuel cells can be used as a battery replacement in portable electronic devices, for combined production of heat and electricity in households and as electricity source in vehicles. Due to their flat design, fuel cells are easily scalable by connecting them in series to form stacks. Electrical efficiencies over 60% are feasible which is much higher compared to other decentralized electricity generation technologies. Redox flow batteries are considered as a promising energy storage technology. These batteries are highly efficient and they provide an energy storage solution for fluctuating energy from wind mills and photovoltaic cells. The ICP supports the progress in the research and development of electrochemical cells by multiphysics computer models. In general, modeling helps to better understand the coupling of chemical, thermal, electrical, mechanical and fluidic processes with the goal to detect weaknesses of the system and provide design improvements. Often these models rely on detailed information about the microstructures of the investigated materials. Hence the characterization of gas diffusion layers and electrolyte micro-structures in 2D and 3D is an integral part of our modeling efforts. In addition to fuel cells, we also do research on novel hydrogen production techniques. For example, we model photo-electro-chemical cells (PECs) which use solar energy to split water and thus produce hydrogen fuel. Most research projects are conducted in collaboration with our strategic partners Hexis AG in Winterthur (SOFC), Paul Scherrer Institut in Villigen (PEFC), EPFL (hydrogen generation) in Lausanne and Universität Ulm (virtual microstructures).

D. Bernhardsgrütter

R. Herrendörfer

G. Mourouga

R. Schärer

J. Schumacher

J. Wlodarczyk

Zurich University of Applied Sciences

14

www.zhaw.ch


Turn static files into dynamic content formats.

Create a flipbook

Articles inside

A.3 Book Chapters

2min
page 48

A.5 Teaching

4min
pages 51-53

A.4 Conferences and Workshops

4min
pages 49-50

5 Startup Culture at ICP

8min
pages 40-43

A.2 Scientific Publications

5min
pages 46-47

4.7 Room Temperature Sensors in the Digital Twin

2min
page 39

4.4 Viscosity Control Technologies for the Controlled Application of Coating Materials

2min
page 36

4.6 Climatic Ceiling Thermal Storage Allows Reduction in Façade Insulation

2min
page 38

4.5 Artificial Intelligence Heat Pump Controller

2min
page 37

4.2 Portable Device for Early Diagnosis of Lymphedema

2min
page 34

4.3 Design and Development of Artificial Skin Models for Tactile Sensing Applications

3min
page 35

4.1 Detecting Nanoparticles in Complex Environments

2min
page 33

3.6 Hardware Software Integration and Validation of a Compact THz System

2min
page 31

4 Sensor and Measuring Systems

0
page 32

Experimental and Simulation Based Approach (CTDyn

2min
page 27

3.4 Investigation of the Efficiency and the Lifetime in OLEDs

2min
page 29

2.5 Quantifying the Impact of Convective Flow and Microstructure Inside Porous Electrodes on Electrochemical Performance of Flow Batteries

2min
page 24

3.5 All Organic Gap Free Terahertz Photonics

2min
page 30

3.3 Investigating Charge Transport in Organic Semiconductors with Electrochemical Methods and Modelling

2min
page 28

2.4 Modelling Capacity Fade in Organic Redox Flow Batteries: Thermodynamics of Transport in Concentrated Solutions

2min
page 23

1.10 Innovative Airborne Wind Power System

3min
page 16

1.11 Development of a Test Stand for Measuring of Thermal Conductivity

2min
page 17

2.3 3 D Model of Water and Heat Transport in PEMFCs During Evaporative Cooling and Humidification

2min
page 22

1.12 Model Based Characterization of the Movement of Hot Air Balloons

2min
page 18

2.2 DeMaPEM: Development and Marketing of Proton Exchange Membrane Fuel Cells for Transport Applications

2min
page 21

1.9 Test Rig for Welding Plastic Samples

1min
page 15

2 Electrochemical Cells and Microstructures

1min
page 19

1.8 Development of a New Generation of High Performance Air Heaters

2min
page 14

1.7 Model Based Optimization of CGO Ni Based SOFC Anodes

2min
page 13

1.3 Investigation of Modal Distortion on Torsional Resonators

2min
page 9

1.6 CFD Model of Exhaust Emission Pollutants in Tromsø Harbor

2min
page 12

1.2 Experimental Studies on the Copper Refining Process

2min
page 8

1 Multiphysics Modeling

1min
page 6

1.4 Simulation Based Calibration of Infusion Systems

1min
page 10

1.1 PM ASPV:Simulation Based Assessment of Magnetic Control of a Free Floating Magnet

2min
page 7
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.