E N R I C O A
R
C
A R G E N T I E R I
H
I
T
work projects
E
T
T
O
A mia Madre che mi ha esemplato la via della Grazia Al miracolo poco fortunato che fu mio Padre che mi ha trasmesso le segrete avventure dell’Ordine
Index personal profile
5
introduction
5
curriculum vitae
6|7 8 10|11 12 13 14|15 16 17
ClubMed general ground floor plan images room module M1 detailed section construction details maquette Ordem dos Arquitectos plans maquette & perspective image
18 20 21 22 24|25 26 27
Carve Hotel general ground floor plan room module detailed section Nagy’s House ground floor plan image
28 30 31
“FLUL” New Class Center ground floor plan images
32 34 35
Total Theater ground floor plan operating stage schemes & image
36 38 39
Student House “Gunpowder Factory” genaral ground floor plan axonometry & images
40 42 43
4
ENRICO ARGENTIERI architect Enrico Argentieri [Brindisi, 1991] holds a Bachelor of Science in Architecture from Polytechnic of Bari, Italy (2018). His graduation thesis titled, Nuove Forme dell’Abitare (”New Housing Models”) was developed under the supervision of Professor, Architect Francesco Defilippis and Professor, Architect Martino Tattara from Dogma Studio (Bruxelles, Belgium). In 2015 he received a EU Erasmus+ scholarship and studied for 10 months at Istituto Superior Técnico (Lisbon, Portugal). Enrico’s Academic works were exposed in 2016 and 2017 at the “BDA_Bari Disegno Architetture, Urban Survey series” and “Architettura fortificata. Rilievo e restauro”. In 2015, his Architectural Design Studio IV project was presented in Bari by Professor, Architect Carlo Moccia, at “L’Università nella Città Metropolitana: La Città della Conoscenza” for the foundation of a University Campus in the metropolitan area of Bari. In 2019, his thesis was presented by Professor, Architect Francesco Defilippis during the 1st International Urban Design Summer School ‘Over De Ring’ (Antwerp & Bruxelles, Belgium) in collaboration between Polytechnic of Bari, Katholieke Universiteit Leuven and RheinischWestfaelische Technische Hochschule Aachen. In September 2018 he passed the Architecture qualifying examination (Polytechnic of Bari commission) and is registered as Architect nº645 in the Order of Architects of Brindisi, Puglia (Italy). Since March 2019 he collaborates with Atelier Machado Costa Arq. Ass. (Lisbon, Portugal).
Introduction This portfolio is a collection of several projects developed during the Portuguese experience at Machado Costa Arq. Ass. in Lisbon. The majority of the works consists of residential, hospitality, educational and cultural buildings. The most audacious and advanced of these projects is the ClubMed in Grândola, which was carried out until the execution phase. This project was followed soon after by the Carve Hotel in Vargens. The last four projects of the Ordem dos Arquitectos, the New Class Center for the “Faculdade de Letras” in Lisbon, the Cultural Center in Loures and the Student House “Gunpowder Factory” in Oeiras, rapresent different architectural typologies that respond to the urban condition seeking to solve - in every case - various needs. The projects are presented in a chronological order.
5
Personally identifiable information born on 29.09.1991 in Brindisi (Italy) addressed in Estrada de Benfica 405, 2° Andar Esq. — 1500-077 Lisbon, (PT) contacts (+39) 340 47 61 955 argentierienr@gmail.com
academic
experience
09.2018 06.2018 Architecture qualifying examination and member of Architecture Association (nº645 in Ordine degli Architetti di Brindisi), Polytechnic of Bari commission.
currently ongoing 03.2019 Architect at Machado Costa Arquitectos Associados (Lisbon, Portugal). · Reformosa Residence, Caparica, Portugal (competition by invitation) | 1.076 m² · Student House “Gunpowder Factory”, Oeiras, Portugal (competition | 2º Prize) | 1.623 m² · University of Minho: New Clinic Laboratory Center, Braga Portugal (competition | 2º Prize) | 6.487 m² · Cultural Center in Loures, Portugal (competition) | 11.331 m² · University of Lisbon: New Class Center for the “FLUL” in Lisbon, Portugal (competition | 2º Prize) | 4.470 m² · Student Residence in Verrès, Italy (competition) | 748 m² · Health Center in Cascais, Portugal (competition) | 3.107 m² · Nagy House, Melides, Portugal (conceptual design, schematic design, design development) | 255 m² — ongoing · Carve Hotel, Benavente, Portugal (conceptual design, schematic design, design development) | 17.204 m² — ongoing · Lisbon’s Architecture Assotiation Building, Lisbon, Portugal (competition) | 297 m² · Restaurant in Av. de Roma, Lisbon, Portugal (conceptual design, schematic design) | 145 m² · Hotel in Loulé, Faro, Portugal (conceptual design, schematic design) | 5.649 m² · ClubMed in Sol Tróia, Grândola, Portugal (schematic design, design development, construction documents, executive drawings) | 40.710 m² — deleted
01.2018 03.2017 Bachelor of Science Degree in Architecture/Master Degree in Architecture discussing the experimental thesis Nuove Forme dell’Abitare (”New Housing Models”) with mentor Professor, Architect Francesco Defilippis in collaboration with Professor, Architect Martino Tattara from Dogma Studio (Bruxelles, Belgium). The thesis is located in the research programme Nuove Forme dell’Abitare inside dICAR Department and his PhD funded by MIUR (Ministero dell’Istruzione, dell’Università e della Ricerca), in collaboration with Katholieke Universiteit Leuven and CERSET (Centro Studi e Ricerche Sviluppo Edilizio e Territorio). 07.2016 09.2015 European exchange programme Erasmus+ Student Mobility for Study A.Y. 2015/2016 for a 10 months experience at Istituto Superior Técnico (Lisbon, Portugal). 12.2015 11.2015 Competition for KYM Field Schools in Africa for tropical savanna climat of Africa with Stavros Balis under direction of Professor, Architect Manuel Guedes from Istituto Superior Técnico (Lisbon, Portugal). 07.2015 09.2014 Professor assistant for Material Construction course at Polytechnic of Bari by Professor, Architect Paolo Capoccia.
03.2019 01.2019 Architect junior at Tua Atelier (Lisbon, Portugal) with the European professional exchange programme UNISCO network for social development, Erasmus for Young Entrepreneurs (EYE 2019). · Apartment Arriaga, Lisbon, Portugal (conceptual design, schematic design, design development) | 95 m² — built · Private House Project 1, Comporta, Grândola, Portugal (conceptual design, schematic design, design development) | 186 m² — ongoing
06.2015 04.2015 Competition for Castello D’Alceste in San Vito dei Normanni (Brindisi, Italia) with Domenico Cristofalo under direction of Professor, Architect Paolo Capoccia as design architect and executive designer. — won, built 11.2014 Restoration project for a winery in Avetrana (Lecce, Italia), as design architect and executive designer under direction of Professor, Architect Paolo Capoccia. — built
07.2018 05.2018 Internship at StudioTalent, Ostuni (Brindisi, Italia).
10.2014 Project for a resturant in Avetrana (Lecce, Italia) as design architect and executive designer with Domenico Cristofalo under direction of Professor, Architect Paolo Capoccia. — built
12.2016 11.2016 Collaboration with nEmoGruppo Architecture Studio (Firenze) as design architect and executive designer for restoring an old building bought from “La Sommità Relais”, in Ostuni, Italia | 473 m² — under construction
01.2014 12.2013 Competition for plaza restoration of Santa Maria del Casale (Brindisi, Italia) with Domenico Cristofalo under direction of Professor, Architect Paolo Capoccia as design architect and executive designer. — won, unbuilt
12.2016 09.2016 Collaboration with Gruppo 3 Studio (San Vito dei Normanni) as design architect and executive designer. · Collective houses in Specchiolla, district of Carovigno, Italia | 355 m²— unbuilt · Private House #1 in Apani, Italia | 86 m² — built · Private House #2 in San Vito dei Normanni, Italia | 53 m² — built
09.2011 Starting studying Architecture in Polytechnic of Bari, dICAR Department.
6
expositions
publications
09.2021 Conference thesis presented by Professor, Architect Carlo Moccia during the BiARCH Festival: Margini, Il Progetto della Forma della Città Aperta at Teatro Margherita (Bari, Italia) with the coordination of Uwe Schröder, Gino Malacarne, Maxime Enrico, Nicola Martinelli, Armando Dal Fabbro and Martino Tattara.
11.2018 BDA_Bari Disegno Architetture, Urban Survey series, by Professor, Architect Valentina Castagnolo and Professor, Architect Anna Christiana Maiorano. Aesei Editor, ISBN 8890957492. 04.2016 Architettura fortificata. Rilievo e restauro, by Professor, Architect Paolo Perfido, Professor, Architect Rossella De Cadilhac and Professor, Architect Valentina Castagnolo. Aesei Editor, ISBN 8890957484.
09.2018 Thesis presented by Professor, Architect Francesco Defilippis during the 1st International Urban Design Summer School ‘Over De Ring’ (Antwerp & Bruxelles, Belgium) in collaboration between Polytechnic of Bari, Katholieke Universiteit Leuven and Rheinisch-Westfaelische Technische Hochschule Aachen.
competences
06.2017 Drawings exposition for BDA_Bari Disegno Architetture, Urban Survey series, by Professor, Architect Valentina Castagnolo and Professor, Architect Anna Christiana Maiorano.
softwares Graphisoft ArchiCAD Autodesk Revit Autodesk AutoCAD Robert McNeel & Associates Rhinoceros Google + Trimlbe Inc. SketchUp Chaos Group V-Ray Abvent Artlantis Studio Rendering Adobe Illustrator Adobe Photoshop Adobe InDesign Microsoft Office Word Microsoft Office PowerPoint Microsoft Office Excel
04.2016 Drawings exposition for Architettura fortificata. Rilievo e restauro, by Professor, Architect Paolo Perfido, Professor, Architect Rossella De Cadilhac and Professor, Architect Valentina Castagnolo. 12.2015 Seminar organized by Department of Urban Planning of the City of Valenzano with the partecipation of ANCE (Associazione Nazionale Costruttori Edili): Architectural Design Studio IV project with Domenico Cristofalo by Professor, Architect Carlo Moccia, presented at L’Università nella Città Metropolitana: La Città della Conoscenza (Cuti, Valenzano) for the creation of a University Campus in the metropolitan area of Bari.
technical proficient in wood and polystyrene dioramas proficient user in computer assisted design (2D & 3D) proficient user in graphic editing
06.2015 Selection among top five projects in the Academic exhibition in Polytechnic of Bari for Architectural Design Studio IV with Domenico Cristofalo by Professor, Architect Carlo Moccia.
arts score music collector piano player languages Italiano (native) English Portuguese
06.2014 Selection among top five projects in the Academic exhibition in Polytechnic of Bari for Architectural Design Studio III with Domenico Cristofalo by Professor, Architect Claudio D’Amato Guerrieri. 06.2013 Selection among top five projects in the Academic exhibition in Polytechnic of Bari for Architectural Design Studio II by Professor, Architect Francesco Defilippis. 06.2012 Selection among top five projects in the Academic exhibition in Polytechnic of Bari for Architectural Design Studio I by Professor, Architect Giuseppe Fallacara. 06.2012 Selection among top five projects in the Academic exhibition in Polytechnic of Bari for Material Construction for the construction of a stone vault maquette (AA.VV.) by Professor, Architect Paolo Capoccia.
7
ClubMed
Beach resort in Tróia, Grândola Client | ClubMed Position | Tróia, Grândola (Portugal) Project | 2018 - ... Intervention area | 175.560 m² Construction area | 40.710 m² Project cost | 47.219.000,00€
The ClubMed Village is a luxury touristic hotel with 300 rooms to be built in the Atlantic Coast in Tróia. Given the environmental relevance of the area, the project respects the dunes areas with the inctroduction of an eco-system based on endogenous species. The hotel is based on four circles of rooms with dedicated internal gardens and a central circle that will host the entrance, administration and reception services of the hotel including a restaurant and a bar with terrace. Other facilities of the ClubMed include a gourmet restaurant, a spa, a congress center, a dedicated space for kids, a gym and sport fields. Morover, the permanent ClubMed staff will reside in the residential building near the entrance. The project is developed in a structural wood system with a BREEAM Certification.
8
Maquette by © Norigem
9
E
10 1
m
General Ground Floor Plan
10
P 09
P90
P90
P90
P90
P90
P90
P90 P90
P90
P90
P90
P90
P90
P90
P90
11
12
Images by © 18—25
A.GU.02
1.43
5.38
AM.06-x01
BALCONY
10.98 m²
+9.325 +9.195
FL.09 C.01
-
-
A.VEAL.01 3.13
L.02
A.VEA
AM.06-102
14.37 m²
FL.01 WI.03 C.01 FT.01 3.06 m
A.VIMA.03 0.90
3.22
1.42
11.63 m²
FL.01 WI.03 C.01 FT.01 3.06 m
AM.06-101
BEDROOM
3.64
LIVINGROOM
4.38
0.90
A.VIMA.03
3.42
3.23
AM.06-105
TOILET
HeS ChS
1.43 m²
ChR
HWS HWR Spr
Hyd
SEW
DM
FL.03 WI.07 WI.14 C.02 2.68 m
0.88
AM.06-104
HALL
4.36 m²
FL.01 WI.03 C.01 FT.01 3.06m
A.AR.03
1.25
1.03
AM.06-103
BATHROOM 5.77 m²
FL.03 FL.04 WI.07 WI.08 WI.09 WI.14 WI.15 C.01 3.06m
NPo CWS HeS
HeS ChS ChR HWS
1.56
HeS
2.17
CWS
A.VIMA.02 0.60
A.AR.02
NPo
+9.350 +9.195 2.29
1.06
1.40 A.VIMA.01
A.AR.01
A.VIVI.01
83
°
3.07
1.20
0.67
1.85
1.03
DM
GUEST GALLERY 15.91 m²
+9.325 +9.195
0.5
1.58
AM.06-x11
FL.09 C.01 3.06 m
A.GU.01
A.GU.01
Room Module M1 A1-4 Scale 1:50
13
0.31
m
Spr Hyd
SEW
A.VEMA.02
1
HWR
+16.70
0.37
A.PC 18
0.18
0.21
A.PC 20
C.01
A.VEAL.04
0.88
CAPEAMENTO/ RUFO EM CHAPA DE ZINCO VIGA GLT (6X35cm) IMPERMEABILIZAÇÃO TIPO "MAPEI"* PAINEL VIROC (e=2,2cm) SARRAFO MADEIRA (5x5cm) MEMBRANA DE BORRACHA ATENUAÇÃO ACÚSTICA TIPO "CDM-MTA-8" e=8 mm LÃ MINERAL (e=50mm, 70kg/m³) PAINEL OSB (e=1,8cm) LÃ MINERAL (2x40mm, 70kg/m³) SARRAFO MADEIRA (5x8cm) BARREIRA PÁRA VAPOR PAINEL TRICAPA (e=3cm) MEMBRANA CORTIÇA (e=5mm) MADRE GLT (VER PROJECTO ESTABILIDADE)
WI.03
3.25
3.52
0.10
CAIXILHOS DE ALUMÍNIO E MADEIRA TIPO "VELFAC ref. EDGE" VIGA GLT (VER PROJECTO ESTABILIDADE)
WI.03 A.VEAL.02
2.10
A.VEMA.03
A.GU.02 A.PC 19
FT.01
A.PC 21
FL.09
FL.01 12.70
VIGA GLT (VER PROJECTO ESTABILIDADE)
0.18
0.37
0.29
0.29
+12.675
0.49
C.01
A.VEAL.06
WI.03
A.VEAL.01
2.10
PAVIMENTO FL.01 (VER PROJECTO DE INTERIORES) BETONILHA CORRENTE (e=5 cm, 1800kg/m³) BETONILHA TIPO "SECIL ECOCORK" (e=8 cm, 900kg/m³) PELÍCULA DE POLIETILENO MEMBRANA DE BORRACHA ATENUAÇÃO ACÚSTICA TIPO "CDM-MTA-8" e=10mm PAINEL OSB (e=2,5cm) SARRAFO MADEIRA (5x8cm) LÃ MINERAL (2x40mm, 70kg/m3) PAINEL TRICAPA (e=3cm) MEMBRANA CORTIÇA (e=5mm) MADRE GLT (VER PROJECTO ESTABILIDADE)
WI.03
2.88
3.06
3.35
0.10
CAIXILHOS DE ALUMÍNIO EM CHAPA QUINADA VIGA GLT (VER PROJECTO ESTABILIDADE) CAIXILHOS DE ALUMÍNIO E MADEIRA TIPO "VELFAC ref. EDGE"
FT.01
A.PC 22
FL.01
0.37
RUFO EM CHAPA DE ZINCO
0.18
0.29
0.29
+9.35
BANDA ACÚSTICA EM CORTIÇA (e=1cm) RUFO EM CHAPA DE ZINCO VIGA GLT (5X21cm)
0.49
C.01
WI.03
WI.03
A.VEMA.03
2.10
A.VEAL.02
A.GU.02 A.PC 19
FT.01
A.PC 23
FL.09
0.18 0.20
RUFO EM CHAPA DE ZINCO
FL.01 +6.00
+5.975 0.38
BANDA ACÚSTICA EM CORTIÇA (e=1cm) SOLEIRA EM CHAPA QUINADA DE ALUMÍNIO DECK EM MADEIRA TECA (e=2,2cm) FIXAÇÃO EM ALUMÍNIO TIPO "CLIP Juan", COM NIVELADOR DE SUPERFÍCIE IMPERMEABILIZAÇÃO TIPO "MAPEI"* BETONILHA CORRENTE (e=50mm 1800kg/m³) PELÍCULA DE POLIETILENO PAINEL OSB (e=2,5cm) LÃ MINERAL (e=8cm, 70kg/m³) SARRAFO MADEIRA (8x8cm) CAIXA DE AR PAINEL TRICAPA (e=3cm) MEMBRANA CORTIÇA (e=5mm) ESTABILIDADE) PROJECTO (VER GLT MADRE RUFO EM CHAPA DE ZINCO VIGA GLT (6X21cm)
2.88
3.06
3.35
0.10
A.VEAL.07
WI.17
1 0.5
m +2.620
Detailed Section Guest Rooms
14
A.VT.13
+16.31
CAPEAMENTO/ RUFO EM CHAPA DE ZINCO VIGA EM GLT (6x35 cm) IMPERMEABILIZAÇÃO TIPO "MAPEI"* PAINEL VIROC (e=2,2cm) SARRAFO DE MADEIRA (5x5cm) MEMBRANA DE BORRACHA ATENUAÇÃO ACÚSTICA TIPO "CDM-MTA-8" (e=8mm) CAIXA DE AR PAINEL OSB (e=1,8cm) CAIXA DE AR SARRAFO DE MADEIRA (5x8cm) BARREIRA PÁRA VAPOR PAINEL TRICAPA (e=3cm) MEMBRANA CORTIÇA (e=5mm) MADRE GLT (VER PROJECTO ESTRUTURA)
0.21
0.37
0.18
0.21
A.PC 24
A.PC 25
C.02
WI.15
WI.15
WI.07
2.75
WI.07
2.96
3.09
A.VT.02
WI.14 WI.14
A.VEMA.01
DECK EM MADEIRA TECA (e=2,2cm) FIXAÇÃO EM ALUMÍNIO TIPO "CLIP Juan", COM NIVELADOR DE SUPERFÍCIE IMPERMEABILIZAÇÃO TIPO "MAPEI"* BETONILHA CORRENTE (e=50mm 1800kg/m³) PELÍCULA DE POLIETILENO PAINEL OSB (e=2,5cm) SARRAFO MADEIRA (8x8cm) CAIXA DE AR PAINEL TRICAPA (e=3cm) MEMBRANA CORTIÇA (e=5mm) MADRE GLT (VER PROJECTO ESTABILIDADE) RUFO EM CHAPA DE ZINCO VIGA GLT (6X21cm)
WI.14 WI.14
A.GU.01 A.PC 26
FL.03
A.PC 30
FL.09
RUFO EM CHAPA DE ZINCO
0.18
0.37
0.27
0.27
+12.675
C.01
WI.15
A.VEAL.03
A.PC 27
CAIXILHOS DE ALUMÍNIO E MADEIRA TIPO "VELFAC EDGE" VIGA GLT (34X10cm) SISTEMA DE ISOLAMENTO TÉRMICO E ACÚSTICO TIPO "SECILVIT CORK" (e=6cm, 70kg/M³) PAINEL CLT (VER PROJECTO ESTABILIDADE) CAIXA DE AR BANDA ACÚSTICA PARA GESSO CARTONADO MONTANTE DE GESSO CARTONADO (5cm) LÃ MINERAL (e=5cm, 70kg/m³) PAINEL DE GESSO CARTONADO (e=1,25cm) MEMBRANA ACÚSTICA DE ALTA DENSIDADE TIPO "DANOSA MAD4" DUPLO PAINEL DE GESSO CARTONADO HIDRÓGOGO (e=2x1,25cm) TELA DE IMPERMEABILIZAÇÃO FLEXÍVEL DE POLIOLEFINA TIPO "REVESTECH DRY50" REVESTIMENTO WI.09 (VER PROJECTO DE INTERIORES)
WI.07
2.72
WI.09
2.90
3.09
3.35
A.VT.01
A.GU.01
A.PC 28
FL.04
FL.09
FL.09 +9.325 0.27
18 17
0.18
0.27 0.37
A.PC 31
19
16
LÃ MINERAL (e=5cm, 70kg/m³) DUPLO PAINEL DE GESSO CARTONADO HIDRÓGOGO (e=2x1,25cm) LÃ MINERAL (e=5cm, 70kg/m³) CAIXA DE AR PAINEL CLT (VER PROJECTO ESTABILIDADE) SISTEMA DE ISOLAMENTO TÉRMICO E ACÚSTICO TIPO "SECILVIT CORK" (e=3cm, 70kg/M³) PAINEL CLT (VER PROJECTO ESTABILIDADE) PAINEL VIROC (e=2,2cm) BANDA ACÚSTICA PARA GESSO CARTONADO MONTANTE DE GESSO CARTONADO (5cm) LÃ MINERAL (e=5cm, 70kg/m³) LÃ MINERAL (e=5cm, 70kg/m³) PAINEL DE GESSO CARTONADO HIDRÓFUGO(1 x 1,25 cm) MEMBRANA ACÚSTICA DE ALTA DENSIDADE TIPO "DANOSA MAD4" DUPLO PAINEL DE GESSO CARTONADO HIDRÓGOGO (e=2x1,25cm) TELA DE IMPERMEABILIZAÇÃO FLEXÍVEL DE POLIOLEFINA, TIPO "REVESTECH DRY50" REVESTIMENTO WI.07 (VER PROJECTO DE INTERIORES)
15
C.02
WI.15
A.PC 25
WI.15
14
A.VT.02 13 12 11
+7.738
3.09
3.35
10
2.72
C.01
C.01
08 07
WI.14
A.VEMA.01 06
WI.14 WI.14
05 04 03 02
A.PC 29
FL.03
+6.151
01
FL.09
+5.975
0.30
0.20
0.16
+5.975
C.05
3.00
WI.14
2.90
WI.07
WI.07
09
WI.17
FL.08
15
A.PC 32
DECK EM MADEIRA TECA (e=2,2cm) FIXAÇÃO EM ALUMÍNIO TIPO "CLIP Juan", COM NIVELADOR DE SUPERFÍCIE IMPERMEABILIZAÇÃO TIPO "MAPEI"* BETONILHA CORRENTE (e=5cm 1800kg/m³) LAJE EM BETÃO (VER PROJECTO ESTABILIDADE) RUFO DE ZINCO
LEGENDA MATERIAIS Betão
CAPEAMENTO E RUFO EM ZINCO VIGA EM GLT 60x350mm MEIA CANA REVESTIDA COM BORRACHA "MAPEI MAPEBAND EASY"
Betão leve i=7,7%
Madeira CLT ou GLT
SISTEMA DE IMPERMEABILIZAÇÃO "MAPEI"* PAINEL VIROC (e=22mm) SARRAFO DE MADEIRA (50x50mm)
50 x 50 50 x 50
MDF
MEMBRANA DE BORRACHA TRATAMENTO ACÚSTICOTIPO "CDM-MTA-8" PAINEL OSB (e=18mm)
Lã mineral 50 x 80
Material elástico
SARRAFO DE MADEIRA (50x80mm)
50 x 80
Cortiça Poliestireno
BARREIRA PÁRA-VAPOR PAINEL TRICAPA (e=30mm)
60 x 350
Placarol
MEMBRANA ACÚSTICA DE CORTIÇA VIGA EM GLT
Gesso cartonado Reboco 80 x 180
Mosaico vidrado
80 x 180
Pedra
A.PC 18
*SISTEMA DE IMPERMEABILIZAÇÃO TIPO "MAPEI" COMPOSTO POR: I) PREMIER SN +QUARTZO 0,5 II) MAPEFLEX MS 45 (SELANTE E ADESIVO HÍBRIDO DE ELEVADO MÓDULO ELÁSTICO ONDE APLICÁVEL) III) MEMBRANA DE POLIUREIA HÍBRIDA TIPO PURTOP 400 M IV) ACABAMENTO POLIURETÂNICO ALIFÁTICO BICOMPONENTE TIPO MAPECOAT PU 15
RUFO EM ZINCO PERFIL GLT (50x210mm) DECK EM MADEIRA TECA (e=22mm) PERFIL DE ALUMINIO NIVELADOR DE SUPERFÍCIE SISTEMA DE IMPERMEABILIZAÇÃO "MAPEI"*
** TIPO "KNAUF ULTRACOUSTIC PAVIMENTO TP/ TP-ST"
60 x 206 360 x 80
80 x 80
BETONILHA CORRENTE (1800 Kg/m³) PELICULA DE POLIETILENO PAINEL OSB (e=25mm) VIGA EM GLT CAIXA DE AR SARRAFO DE MADEIRA (80x80mm) PAINEL TRICAPA e=30 mm
MEMBRANA ACÚSTICA DE CORTIÇA MADRE GLT RUFO EM ZINCO
80 x 180
80 x 180 A.PC 19
SISTEMA DE IMPERMEABILIZAÇÃO "MAPEI"* PAINEL VIROC (e=22mm) SARRAFO DE MADEIRA (50x50mm)
50 x 50
MEMBRANA DE BORRACHA "CDM-MTA-8" LÃ MINERAL (e=50mm, den. mín. 70 Kg/m³) PAINEL OSB (e=18mm) SARRAFO DE MADEIRA (50x80mm) LÃ MINERAL (e=2x40mm den. mín. 70 Kg/m³) BARREIRA PÁRA-VAPOR PAINEL TRICAPA (e=30mm)
50 x 80
MEMBRANA ACÚSTICA DE CORTIÇA
MADRE EM GLT 80 x 180
80 x 180 MEMBRANA ACÚSTICA DE ACORTIÇA VIGA EM GLT
160 x 370
A.PC 20
SOLEIRA EM CHAPA QUINADA DE ALUMINIO CORDÃO DE SILICONE PAVIMENTO FL.01 (VER PROJECTO DE INT.) BETONILHA CORRENTE (1800 Kg/m³) MEMBRANA DE BORRACHA "CDM-MTA-8" BETONILHA "SECIL ECOCORK" (900 Kg/m³) VIGA EM GLT PELICULA DE POLIETILENO MEMBRANA DE BORRACHA "CDM-MTA-8" PAINEL OSB (e=25mm) LÃ MINERAL (e=2x40 mm den. mín. 70 Kg/m³) SARRAFO DE MADEIRA (50x80mm) 80 x 80
20 10
80 x 80
50 x 80
160 x 230
50 x 80
PAINEL TRICAPA e=30 mm MEMBRANA ACÚSTICA DE CORTIÇA MADRE GLT (VER PROJECTO ESTABILIDADE)
cm
Construction Details Guest Rooms Scale 1:10
80 x 180
80 x 180
DECK EM MADEIRA TECA (e=22mm) SISTEMA DE IMPERMEABILIZAÇÃO "MAPEI"* BETONILHA CORRENTE (1800 Kg/m³) PELICULA DE POLIETILENO PAINEL OSB (e=25mm) LÃ MINERAL (e=2x40 mm den. mín. 70 Kg/m³) PAINEL TRICAPA e=30 mm
80 x 180 A.PC 21
16
Maquette by © Norigem
17
Ordem dos Arquitectos
Exhibition gallery, training and meeting rooms, coffeehouse Client | Ordem dos Arquitectos Position | Lisbon, Portugal Project | 2019 - 2020 Intervention area | 338 m² Construction area | 297 m² Project cost | 497.640,00€
“Lisboa precisa da força da arquitectura, da afirmação de gestos fortes. Onde senão ao edifício dos Arquitectos se irá buscar esse ânimo, essa convicção, esse desprendido parecer?”1 With those words – voluntarily not translated – ended the Memory of Manuel Graças Dias and Egas José Vieira on the 1991 project for the Ordem dos Arquitectos (OdA). Our project aims to rebuild that “Architectural Force” that is missed in that part of the old building of the OdA. The project achieves the functional request to build a common area on the ground floor plan with a bar and an internal patio and two rooms for educational purpose - those directly linked with the old existing building. On the first and second floor there is the noble space of the multipurpose hall characterized by an irregular shape and lighted up by the Northern light. But the most important aspect of the project is its relationship with the city and with the corner of the Dom Luís garden. The urbanistic relevance of the shape is expressed in the powerful corner and in the drawing of the facade, closed to the streets and opened behind, looking directly on the Banhos de São Paulo building.
1 Graça Dias, M; José Vieira, Egas: Banhos de São Paulo – Nova Sede da AAP; Memória Descritiva, pág 9; January 1991.
18
19
Second Floor Plan
First Floor Plan
1 0.5
m
Ground Floor Plan
20
21
Carve Hotel
Hotel complex with spa, restaurant and public spaces Client | Private Investors Position | Benavente, Portugal Project | 2020 - ... Intervention area | 62.350 m² Construction area | 17.204 m² Project cost | 32.770.144,00€
The Carve Hotel in Benavente is based on a archetype abbey model. The main necessity from an architectural point of view was to build a form that could stand on by itself because of the absence of other references around. The hotel is built around two large courts that host the rooms, with a central smaller court that is the core of the building where administration, reception and staff facilities are located. This last section develops into the restaurant and the bar organized across two levels. The basement hosts technical areas, kitchens and laundries. The rooms are drawn around a single typology that is repeted across the hotel, except in the corners where the suites are located. Finally, the hotel is completed with the remaining areas of the congresse center and the spa that are located on the empty side of the courts, meanwhile a bio-pool on the West side close the composition near the river edge.
22
Image by © 4arq
23
5 1
20 10
m
General Ground Floor Plan
24
25
1 0.5
m
Room Module Scale 1:50
26
RUFO DE ZINCO OSB ZINCO OSB IMPERMEABILIZAÇÃO REBOCO BETÃO ZINCO
+47.385
OSB
BETONILHA, i=1,5% BETÃO ISOLAMENTO TÉRMICO
MADEIRA CAIXILHARIA MADEIRA VIDRO DUPLO
MADEIRA AÇO PINTADO À COR PRETO MADEIRA
+42.175
DECK MADEIRA
ISOLAMENTO TÉRMICO BETONILHA, i=2,5% BETÃO ISOLAMENTO TÉRMICO
MADEIRA Detailed Section Guest Room Scale 1:20
27
Nagy’s House
A rural house on the Atlantic Coast Client | Private Position | Melides, Grândola (PT) Project | 2020 - ... Intervention area | 643 m² Construction area | 245 m² Project cost | 335.143,00€
The house for the Nagy family had to meet two different needs. On the hand to be a comfortable family holiday house in a rural countryside near the Oceanic coast. On the other hand to include dedidcated spaces that could be rented out to tourists. The property is divided in two by the entrance hall. In the southern section there’s the family house; in the northern part there are two guest rooms. The main theme of the project is the inverted roof that rules the importance of the spaces below him, and so, the living room – being the most importante space for the family - has more heigth and dominate the external spaces with the terrace and the swimming pool. We managed to root the project in the territory and avoided to simply draw an object. The result was a sense of comfort to the whole building without being invasive.
28
29
1 0,5
m
Ground Floor Plan Scale 1:200
30
31
“FLUL” New Class Center
New lecture hall and public spaces for the Faculty of Literature Client | University of Lisbon Position | Lisbon, Portugal Project | 2020 Intervention area | 10.942 m² Construction area | 4.470 m² Project cost | 4.827.900,00€
The project aims to demolish and replace one of the existing University building. The old construction is a small, one-story patio that was built after the end of the dictatorship in Portugal. The building was developed very fast by using pre-construction techniques in line with the “New State” style. Our intention for the new pavilion was to draw a connection with the historical building of the University. We did so in two different ways: by introducing drawings on the facades that tries to give a sense of urbanism to the external common spaces and builds a relationship with the old building; and by connecting different levels to allow students to easily reach the new pavilion. Developed on two stories, on the ground floor we located the students rooms, while the administrative desks and the professors’ offices were placed on the first floor.
2º Classified in International Competition
32
Image by © Serrazina Studio
33
10 1
m
Ground Floor Plan Scale 1:1000
34
35
Images by © Serrazina Studio
Total Theater
Cultural center, auditorium and coffeehouse Client | Municipality of Loures Position | Loures, Portugal Project | 2021 Intervention area | 14.968 m² Construction area | 11.331 m² Project cost | 9.862.500,00€
The Loures Cultural Center project was developed for a 2021 international competition The project seeks a dialogue with various architectural themes, from the shape of a theater to the difficulty of the urban scene, a problem that derives from the disordered and unclear morphology of the neighborhood in which the project takes place. The first step was to choose the shape of the general plan to include the theater, a coffeehouse, recording studios and various offices. Moreover we defined the relationship between this shape and the city. Our idea was to draw a building that promotes the neighborhood: an entrance square at the height of the main street that connects the auditorium and the coffeehouse with the underlying garden as an urban limit. The massive construction that hosts the auditorium is the most audacious part of the project. It was inspired by the lesson of the unbuilt Walter Gropius’s Total Theater in Volksbühne in 1927 where the main stage is designed to cater different purposes including theatrical shows, concerts and events of different nature. The project ranked 7th out of 57 projects submitted.
36
Image by © Serrazina Studio
37
10 1
m
Ground Floor Plan Scale 1:1000
38
39
Image by © Serrazina Studio
Student House “Gunpowder Factory” University Residence, reading room and canteen Client | Municipality of Oeiras Position | Oeiras, Portugal Project | 2021 Intervention area | 2.246 m² Construction area | 1.623 m² Project cost | 1.940.545,50€
2º Classified in International Competition
Located just outside the metropolitan area of Lisbon, in Oeiras, the old gunpowder factory is occupied today by various institutions such as museums, research centers and universities. The project - which will be used by the Atlantica University - required the conversion of three old buildings into apartments, and the creation of a new building that will have to be installed in a lot characterized by an irregular shape due to the stream that flows a few meters from the existing buildings. The program of the extension required the creation of thirty dormitory units, a canteen and a study room. The most difficult design challenge was the volumetric resolution in positioning the new volume within the given limits. It was decided to divide the new project into three distinct parts: - I - a narrow and long three story branch used for rooms, - II - a two story block positioned at the entrance to the lot that hosts kitchen and services on the ground floor with study room on the upper floor, and - III - a very low volume that connects those three parts all together and hosts hall and canteen. Particular attention was paid to the design of the rooms which developed the module on which the design of the whole is based.
40
41
10 1
m
General Ground Floor Plan
42
43
“L’ Avventura”, Michelangelo Antonioni Cinematography, Aldo Scavarda 1960
44
« Tage währts, Jahre dauerts. » Peter Handke “Gedicht an die Dauer”
45
argentierienr@gmail.com (+39) 340 47 61 955 ITALIA PORTUGAL