Power tools

Powering up in 2021

By Andy Carlo On the following pages, HBSDealer has assembled a collection of the latest power tool releases emphasizing efficiency and longevity on the jobsite.

Metabo HPT has introduced the newest addition to its cordless nailer lineup with the 18V MultiVolt 18-Gauge Compact Brad Nailer (model NT1850DF). This brushless cordless nailer is 30% more compact and 31% lighter than its predecessor (model NT1850DES) at only 4.4 lbs., making it easier to fit into tight spaces and to nail crown overhead for hours without getting fatigued, Metabo HPT said. The nailer can deliver a driving speed of 3 nails per second with zero ramp-up time saving valuable time and increasing productivity. This compact brad nailer is a convenient alternative for any trim application offering the freedom to move without the hassle of dragging a hose, lugging a noisy compressor, or having to deal with gas cartridges. The 18V cordless brad nailer drives 1,650 brad nails per charge with the included compact 3.0Ah battery (or up to 4,000 brad nails per charge with an 8.0Ah MultiVolt battery). The NT1850DF cordless brad nailer drives 5/8” up to 2” 18-Gauge brad nails up to 0.31” in diameter. The tool-less depth of drive adjustment, now located on the left side, is easier to operate for right-handed users, which adds convenience to quickly change to flush drive or countersink into varying material. Metabo-HPT.com/us

The DeWalt Tool Connect Chip, a Bluetooth beacon add-on, allows tools to easily and wirelessly work with the manufacturer’s Tool Connect System. The Tool Connect System is designed to seamlessly track, assign and manage jobsite inventory to optimize productivity, saving time and budget. Integrating the chip adds tracking capabilities that are compatible with DeWalt’s Tool Connect Site Manager software, available for web and mobile. The system adds, manages, and tracks inventory for jobsite visibility. The Tool Connect Chip can be installed in the designated pocket of chip-ready products to protect it from damage and is equipped with a blue identification light which helps locate and differentiate among identical tools. DeWalt.com Milwaukee Tool has rechargeable personal lights that leverage a built-inbattery and USB charging to deliver highperformance output and rechargeable capabilities in their most compact form. The three new solutions include a Rechargeable 250L Penlight w/ Laser, Rechargeable 500L Everyday Carry Flashlight w/Magnet, and Rechargeable Headlamp and Magnetic Task Light. In applications where size is critical, these new solutions provide users with the best combination of portability and LED technology, Milwaukee said. Providing 250 lumens of TrueView High Definition Output, the Rechargeable 250L Penlight with Laser features a laser pointer to ensure faster inspections and accurate communication on the jobsite. Delivering 500 lumens of TrueView High Definition Output, the Rechargeable 500L Everyday Carry Flashlight w/ Magnet provides the ability for users to use in hand or work handsfree. The magnetic base allows users to quickly switch from handheld use to hands-free, while a reversible clip makes it easy to attach to the brim of a hat or pocket. The Flashlight has three output modes, including high, medium, and low mode, and comes with USB charging and an on board battery indicator. Providing 450 lumens of TruView High Definition Output with spot and flood beam options, the Rechargeable Headlamp and Magnetic Task Light is designed for use on bare heads and hard hats and can also be detached for use as a magnetic task light. MilwaukeeTool.com

The latest batterypowered rebar tying tool from MAX Co Ltd., the TwinTier, can form 4,000 ties per charge. The durability of the tools has improved due to the continuous R&D efforts of our over 200 engineers and the range of the rebar tying capability has significantly increased as well. Traditionally, the RB655 has been the tool with the largest rebar tying capacity since its launch in 2007, tying up to #8 on #9 rebar combinations. Contractors working with rebar, from rodbusters to electricians, are utilizing the large capacity of the RB611T to finish rebar tying faster for these larger rebar applications.The TwinTier platform ties at approx. ½ sec per tie due to its dual wire feeding mechanism. This tool platform also uses less wire per tie because of the wire pull-back mechanism (yields approx. 200 ties per spool when tying #5 on #5). These efficiencies make the RB611Ts very appealing, especially to contractors who have previously used older rebar tying tools. Maxusacorp.com

The new Paslode Model CFN325XP Cordless Framing Nailer addresses pro contractor needs including strong jobsite performance, greater comfort, and consistent power. The Paslode Cordless XP Framing Nailer is perfect for applications such as framing, truss attachment, wall panels, floor joists, decking, fencing, blocking, and more. Its performance is outstanding thanks to the uniqueness of its fuel-powered system that drives 9,000 nails per battery charge and 1,200 nails per fuel cell to keep you productive all day. It comes with a rear-load magazine with a bypass follower for faster nail loading – just load and pull. The Paslode Cordless XP Framing Nailer is also the lightest cordless framing nailer on the market at 7.2 lbs., up to four pounds lighter than the competition. Paslode.com Bosch Power Tools’ newest entries to its line of random orbit sanders, the GEX33-5N, 5 In. Random Orbit Sander, replaces the 3725DEVS; the GEX33-6N 6 In. Random Orbit Sander, replaces the 3727DEVS; and the GEX34-6N 6 In. Random Orbit Sander, replaces the ROS65VC-6. Designed for professionals, the new orbit sanders are engineered for years of use. The sanders deliver superior performance for tough and fine sanding and polishing jobs. The rotation action coupled with side-to-side motion makes it ideal for achieving an extremely clean sanding and polishing finish with no swirl marks left behind. The orbit sanders’ microfilter dust system filters fine dust particles as small as a 1/2 micron in diameter. To ensure a strong grip of the disc while in use, the sanders employ Bosch’s signature HookTight hook-andloop disc attachment as well as an exclusive dual-bearing pad mount for less vibration. The sanders also come equipped with a variable-speed dial, which provides control from 4,500 to 12,000 orbits per minute (opm), empowering the user to match the speed of the sander to the task. The new sanders are exclusively compatible with Multi-hole backing pads. BoschTools.com