phantomatic T3>T3A>T3 S>T3 Star>X4>X6
GB
SELECT YOUR PARTNER
winning series
T3 / T3A / T3S / T3 Star / X4
X6
Phantomatic: each one has its own One range, many solutions. Phantomatic is the range of CNC machining centres for aluminium, light alloy, PVC and steel profiles with up to 3 mm thickness (according to the models). It offers many options and configurations to meet every specific requirement. Available in the 3 or 4-axes CNC version and 4300 mm X-axis stroke. The 4-axis version is also available with a 7700 mm X-axis stroke.
Tailored Choice
The winning combinations Phantomatic offers various constructive solutions to adapt to the various operational requirements. In the X4 and X6 models, thanks to the 4th CNC axis, the electrospindle rotates continuously from 0째 to 180째 to operate along the entire contour of the workpiece. The T3 S and T3 Star models have a rotary worktable, which allows machining the profiles with angles ranging between -90째 and +90째, keeping the spindle always in vertical position, thereby ensuring maximum power and precision. The 3-axes models, T3 and T3 A, allow machining the 5 sides of the profile thanks to the use of high rotational speed angular units.
ALU - WOOD
ALU
STEEL
pvc
Action power Power and agility Phantomatic can be equipped with electrospindles with high torque power ranging between 5.5 and 7.5 kW in S1 in order to carry out heavy-duty processing. The double tank lubrication system allows using both minimal oil quantity and oil emulsion micro-mist. Therefore, you can choose the best suited system according to the type of material and processing. As an option, the spindle can be set for rigid tapping and Flow-Drill速 (T versions).
REFERENCES AND CLAMPING Intelligent clamps Phantomatic always opts for the best grip. The position of every clamp unit is calculated by a software according to the operations to be carried out on the profile so as not to interfere with the processing clearance. The units are moved quickly and without any margin of error. The X6 HP version is an exception since it has two additional axes that position the clamps separately from the trolley while the machine is running. T3, T3 A, X4 and X6 models have a translation movement along the Y-axis of the clamp unit, which allows processing the sides even of important profile sections, despite the clearance of the angular unit i.e., the rotated spindle.
Left and right To ensure correct positioning of the workpieces, Phantomatic is equipped with recessed profile reference end stops. One on the left and one on the right (optional in T3 models), selected automatically. The presence of two end stops allows processing 2 profiles simultaneously, operating in multipiece mode or oversized bars with a single programming by repositioning the workpiece on the second end stop.
ALL AROUND Versatile tool storage unit The Phantomatic 4 or 8-slot tool storage unit boasts an exclusive round design that reduces the overall dimensions and increases tool change speed. The covering protects the tool storage unit from swarf and accidental knocks. Besides the standard tools, the tool storage unit can also be equipped with 2 angular units and a milling disc for machining all the sides of the profile. The Phantomatic X6 8-slot tool storage unit is located on the trolley solidly connected to the electrospindle. This solution allows for a drastic reduction of tool change times, thereby making them always available exactly where they are needed.
TOTAL CONTROL
Interface under control The Phantomatic range operator interface is equipped with a 15� suspended monitor that can be oriented according to requirements. The touch-screen display and a user-friendly software make the interface particularly simple and intuitive. The control is integrated with the mouse, keyboard and front USB port for external memory connection. The CNC can also be set to be equipped with a barcode reader and an MG PILOT pushbutton panel that optimises the management of manual functions.
DOUBLE AREA Maximum productivity Phantomatic X6 is available in 3 versions: X6 M, X6, X6 HP. All versions can operate in single-piece and multipiece mode on a single machining area of up to 7.7 m length. The X6 and X6 HP models also allow machining in pendular mode on two independent machining areas. The HP version allows operating in dynamic pendular mode thanks to two independent clamp positioners, controlled by two additional axes, which position the clamps while the machine is running. The positioners are equipped with a workpiece reference end stop, which allows positioning several profiles in each machining area.
Single Piece Mode
Swinging Mode
Multipiece Method
Dynamic Swinging Mode
TAKE MEASURE
Measure your profile Phantomatic X6 is equipped with a profile length measuring system. A moving plate located on the right hand side of the trolley allows the machine to electronically verify the true length of the profile to be machined. Once the workpiece has been adjusted with reference to the left and right end stops, the system electronically imports the data and the CNC automatically corrects any errors due to manual insertions.
IN YOUR HAND
Close at hand MG Pilot is the pushbutton panel of the Phantomatic range, equipped with LCD graphic display that allows to have all the machine functions close at hand. The display shows all the manual operations that are validated through the pushbutton panel; this way, the operator does not have to place himself at the CNC on board the machine. MG Pilot is particularly useful in Pendular mode.
unit of measurement
PHANTOMATIC T3
X-AXIS (longitudinal) 1 side/5 sides
mm
4300/4060
Y-AXIS (transversal) 1 side/5
mm
210/140
Z-AXIS (vertical) 1 side/5 sides
mm
258/230
°
-
X AXIS (longitudinal)
m/min
56
Y AXIS (transversal)
m/min
22
Z AXIS (vertical)
m/min
22
A AXIS (automatic workpiece rotation)
°/min
-
WORK FIELD
A AXIS (automatic rotation) POSITIONING SPEED
ELECTROSPINDLE FEATURES Maximum power in S1
kW
5,5 - 7,5 (O)
Maximum speed
1/min
20000
Maximum torque
Nm
Tool attachment cone
7,5 HSK-63F
Electrospindle set for Flow-Drill®
o
TAPPING CAPACITY (with tap, on aluminium through hole) Encoder on electrospindle for rigid tapping
o
With compensator
M8
Rigid tapping
M10
TOOL STORAGE UNIT Automatic tool change
•
Number of tools in the storage unit
4 - 8 (O)
Maximum diameter of the tool that can be loaded into the storage unit
mm
12
Maximum length of the tool that can be loaded into the storage unit
mm
130
mm
180
Blade slot in the storage unit
1
Maximum diameter of the blade that can be loaded into the storage unit Maximum number of angular units
2
90° angular unit - 2 outputs - ER20
o
Roto head
O
POSITIONING AND LOCKING OF PROFILE Fixed automatic workpiece reference end stops
1+1 (O)
Independent dynamic workpiece reference end stops
-
Maximum number of pneumatic clamps
4-6 (O)
Manual clamp positioning
•
Automatic clamp positioning through X-axis
-
Automatic clamp positioning through H and P-axes
-
Side tunnels
o
LUBRICATION Double tank that allows managing different lubricants 1) oil emulsion water micro-mist lubrication system and 2) minimal oil quantity lubrication system
•
CNC features CNC-PC with LCD-TFT touch screen display
•
USB port
•
RJ45 network card
•
MG PILOT pushbutton panel
o
Barcode reader/barcode radio
o
SOFTWARE ON BOARD THE MACHINE CAM - EDITOR - DRILL
•
CAMPLUS - JOB - SHAPE
o
OTHER OPTIONS Rubber swarf evacuation belt
o
Fume extraction system
o
GENERAL DATA Overall machine weight
kg
1950
Operating pressure
bar
6÷8
Nl/min
175
Air consumption Current consumption Installed power
•
included
o
optional
-
not available
A
16
kW
7,5
PHANTOMATIC T3 A
PHANTOMATIC T3 S
PHANTOMATIC T3 STAR
PHANTOMATIC X4
PHANTOMATIC X6
4000/3760
3250/3150
3250/3150
4000/3760
7700/7460 7320/7080 (HP version) 210/180
210/140
210
210
210/180
258/230
215/160
215/160
250/250
250/250
-
-90°/0°/ +90°
-90° ÷ +90°
0° ÷ 180°
0° ÷ 180°
56
56
56
75
75
22
22
22
22
22
22
22
22
22
22
-
-
-
4500
4500
5,5 - 7,5 (O)
5,5 - 7,5 (O)
5,5 - 7,5 (O)
7
7
20000
20000
20000
16500
16500
7,5
7,5
7,5
7,5
7,5
HSK-63F
HSK-63F
HSK-63F
HSK-50F
HSK-50F
o
o
o
-
-
o
o
o
o
o
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
•
•
•
•
•
4 - 8 (O)
4 - 8 (O)
4 - 8 (O)
4 - 8 (O)
8
12
12
12
12
12
130
130
130
130
130
1
1
1
1
1
180
180
180
180
180
2
2
2
2
1
•
o
o
o
o
O
-
-
-
-
1+1 (O)
1+1 (O)
1+1 (O)
2
2
-
-
-
-
• (HP version)
4-6 (O)
4
4
4-6 (O)
6 - 12 (O)
-
•
-
-
-
•
-
•
•
• (M - X6 version)
-
-
-
-
• (HP version)
•
o
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
o
o
o
•
•
o
o
o
o
o
•
•
•
•
•
o
o
o
o
o
o
o
o
o
o
o
o
o
-
-
1950
2000
2000
2000
3600
6÷8
6÷8
6÷8
6÷7
6÷7
175
175
175
175
175
16
16
16
16
16
7,5
7,5
7,5
10
10
The product data, descriptions and illustrations appearing in this catalogue are shown for advertising purposes; they are given as examples only, and shall not be binding on the manufacturer or the vendor under any circumstances. For marketing reasons, products may be reproduced or portrayed with non-standard configurations, colours or optional extras, in older versions or with special customisations or different technical characteristics, possibly for supervening manufacturing reasons. The manufacturer and the vendor reserve the right to make any modification whatsoever to the products. Please contact the sales personnel if you have any queries.
w w w. e m m e g i . c o m Š CIFIN - October 2011 - All rights reserved - GB 276703