ERIKS Industrial Products, Services & Solutions
PROBLEM SOLVER DON’T THROW AWAY THE OLD BELT JUST YET . . . Mining and Quarrying
Problem: If you are operating equipment using a conveyor belt you
will experience the belt cover wears through in some parts over time and might face the renewal of the whole system. At best, the conveyor will have to be removed from service long before its time. At worst, the damage could lead to catastrophic failure, loss of production, unscheduled maintenance downtime and even injury.
Solution: The LOCTITE CONVEYOR BELT REPAIR offers the
Ref: PS112
solution. A US mining company uses this system on its stone conveyors, and has restored belts to full working order within just two hours. An Australian manufacturer has achieved repairs in the same timescale – in a ship-loading application that had been losing up to £7,000 per hour through delays caused by belt damage. But it’s not just cost savings from quick and timely repairs that make this LOCTITE solution so effective. A quality repair can even extend belt life too – by up to 70% in most cases.