Hose Self-Assembly Stater Kit

CANCEL THE EMERGENCY CALL OUT Hose Self-Assembly Starter Kit + £1 Crimper*

Let’s make industry work better

TC9987 - ERIKS - Hose Assembly 4pp_v5.indd 1

17/09/2019 07:22:49

CRIMP & SAVE SAVE £180 PER ASSEMBLY When a hydraulic hose fails, it’s an emergency. But that doesn’t mean it has to cost you an emergency call-out charge. Not when you can manufacture your own factory quality hose assemblies on the spot, in less time, for far less cost.

WHY PAY A PREMIUM?

60 MINUTE HOSES

Around 75% of the charge for an emergency call-out is nothing to do with the cost of the hose assembly. It’s the premium you pay for the “privilege” of having a oncall mobile service.

Most mobile hose services provide an ETA of 60 minutes from your first call. Though remember: “E” stands for “Estimated”, not “Exactly.”

Make a hose assembly in-house, and you can save around £180 per assembly. And if you do it now, you can get the crimper you need to do the job, for just £1*.

That’s an additional saving of around £8,499.

With your own in-house crimper, you can usually manufacture your own replacement assembly in less time than it takes for the van to reach you. Which means production could be back up and running before the mobile engineer has even opened his toolbox.

FACTORY QUALITY – FASTER The ERIKS £1 Crimper* offer gives you a choice of professional-standard Gates crimpers, ranging from a lightweight hand-operated machine to a more heavy duty power-operated crimper.

Whichever one you choose, you can be sure it’s fully compatible with, and optimised to work with, the Gates hoses and couplings in the relevant Starter Kit. Starter Kits are tailored to your requirements, but will always include the most common couplings with BSP, JIC, ORFS, and metric end terminations.

Kits are also available to facilitate the crimping of the Goodall Duracrimp industrial hose range. These crimpers can also support the manufacturing of PTFE hose assemblies for high temp applications.

We also provide comprehensive Gates crimp data, so you can be sure of factory quality results every time – in less time.

TC9987 - ERIKS - Hose Assembly 4pp_v5.indd 2

17/09/2019 07:22:52

BE TRAINED TO SAVE MONEY TOOLBOX TRAINING Choose an ERIKS Hose Self-Assembly Starter Kit and £1 crimper, and your engineers will be given free basic “Toolbox Training” in the use of the equipment.

You’ll also receive a free, simple instructional poster to position by the crimper, as a reminder of how to operate it safely.

BFPA TRAINING Alternatively, you can invest in a full day’s training

by ERIKS in conjunction with the British Fluid Power Association. This not only trains your engineers in crimper operation but also covers how hose assemblies perform, how they fail, when to replace, and health and safety considerations.

STARTER KITS START HERE With a typical saving of £180 on every self-assembly compared with an emergency call-out, you can recoup the cost of your Starter Kit in fewer than 20 breakdowns.

MC1001

MCX20

MCX25

Lightweight crimper for hose assemblies up to 1” wire braid. *Just £1 with hose and couplings spend of £3,350.

Hand-operated crimper for wire braid up to 1¼” and multi-spiral up to 1”.

Includes die sets storage box. *Just £1 with hose and couplings spend of £5,950.

Powered crimper for hose assemblies up to 1¼” (wire braid) and 1” (multispiral). *Just £1 with hose and couplings spend of £7,400.

TC9987 - ERIKS - Hose Assembly 4pp_v5.indd 3

17/09/2019 07:22:54

eriks.co.uk

EB279 09/19 © ERIKS Industrial Services, all rights reserved.

For your local Service Centre UK or Ireland Call: 0121 508 6000

TC9987 - ERIKS - Hose Assembly 4pp_v5.indd 4

ERIKS UK & Ireland Head Office: Amber Way, Halesowen, West Midlands, B62 8WG

Let’s make industry work better

17/09/2019 07:22:55