English Books and Journals
Building Physics - Heat, Air and Moisture.
Fundamentals and Engineering Methods with Examples and Exercises Hugo S. L. C. Hens 2007. 270 pages, 133 figures, 16 tables. ISBN: 978-3-433-01841-5 59,- Euro / 80,- US$
- content well structured combining theory with typical building engineering practice - applications for students - author with international appreciation (Scandinavia, Benelux, USA, Canada) About the book Bad experiences with construction quality, the energy crises of 1973 and 1979, complaints about 'sick buildings', thermal, acoustical, visual and olfactory discomfort, the move towards more sustainability, have all accelerated the development of a field, which until 35 years ago was hardly more than an academic exercise: building physics. Through the application of existing physical knowledge and the combination with information coming from other disciplines, the field helps to understand the physical performance of building parts, buildings and the built environment, and translates it into correct design and construction. - The book combines the theory of heat and mass transfer with typical building engineering applications. The line from theory to application is dressed in a correct and clear way. In the theory, oversimplification is avoided. This book is the result of thirty years teaching, research and consultancy activity of the author. -
Special Price for Package ISBN: 978-3-433-02963-3 99,- â‚Ź / 135,- US$ Applied Building Physics Hugo Hens 2010. 322 pages with approx. 100 figures. ISBN-13: 978-3-433-02962-6 59,- Euro / 80,- US$ - systematic overview, especially for structural engineers About the book As all engineering sciences, Building Physics is oriented towards application, reason why, after a first book on fundamentals published in 2007, this second tome looks at the performance rationale and performance requirements. - Numerous parameter examples for various climates from the whole of Europe, e.g. Aberdeen, Rome, Copenhagen, Munich, Kiruna, Oslo - Author with international appreciation (Scandinavia, Benelux, USA, Canada)
Performance Based Building Design 1 From Below Grade Construction to Cavity Walls Hens, H. S. L. C Will be published in April 2012. Approx 260 pages with 172 figures 21 in colour. Softcover. ISBN: 978-3-433-03022-6 approx EUR 59.- / 80,- US$ About the book With the need to upgrade energy efficiency the interest in overall building performance grew. This book applies the performance rationale, advanced in applied building physics, to the design of buildings, e.g. air tightness, moisture tolerance, acoustics, durability, fire safety. Marketing arguments: - Aim of performance based design: sustainability, energy performance - Content well structured combining theory with typical building engineering practice - Performance evaluation of all building parts with regard to: structural integrity, air tightness, thermal characteristics, moisture tolerance, acoustics, durability, fire safety, maintenance and economy - Contains numerous parameters for various materials - Author with international appreciation (Benelux, Scandinavia, USA, Canada)..
Package: Performance Based Building Design 1 and 2 2012. approx 620 pages. Softcover. ISBN: 978-3-433-03024-0 approx EUR 99.-
Architects´ Data E. Neufert / P. Neufert / B. Baiche / N. Walliman Will be published in February 2012 4th edition. 608 pages, Softcover. ISBN: 978-1-4051-9253-8 approx. EUR 77,90 / approx. 99,95 US$ About the book Neufert’s Architects’ Data is an essential reference for the initial design and planning of a building project. It provides, in one concise volume, the core information needed to form the framework for the more detailed design and planning of any building project. Organised largely by building type, it covers the full range of preliminary considerations, and with over 6200 diagrams it provides a mass of data on spatial requirements. Most illustrations are dimensioned and each building type includes plans, sections, site layouts and design details. An extensive bibliography and a detailed set of metric/ imperial conversion tables are included. Since it was first published in Germany in 1936, Ernst Neufert's handbook has been progressively revised and updated through 39 editions and many translations. This fourth English language edition is translated from the 39th German edition, and represents a major new edition for an international, English speaking readership.
Geotechnical Engineering Handbook
Volume 1: Fundamentals Ulrich Smoltczyk (ed.)
2002. 787 pages, 616 figures, 82 tables. ISBN: 978-3-433-01449-3 205,- Euro / 280,- US$
- excellent work on geotechnical engineering, which both explains the theoretical background as well as describing practical applications - set to become the standard reference - International authors guarantee its global relevance About the book Volume 1 covers the basics necessary for any construction activity in foundation engineering. This systematic introduction to the assessment of soil and rock properties provides an insight into the requirements of Eurocode 7, Parts 1 and 3. It also gives details of geotechnical laboratory and field tests and the associated equipment, concise treatments of relevant solutions provided by the theories of elasticity and plasticity and numerical methods applied to solve problems of geotechnical design. The problems of earthquakes are also explained with regard to Eurocode 8. Author Biography Ulrich Smoltczyk is editor of the German Grundbau-Taschenbuch. He was Professor for geotechnical engineering in Stuttgart and sat on numerous national and international committees responsible for norms and standards.
Geotechnical Engineering Handbook Volume 2: Procedures Ulrich Smoltczyk (ed.) 2002. 679 pages, 558 figures, 67 tables. ISBN: 978-3-433-01450-9 205,- Euro / 280,- US$
About the book Volume 2 of the Handbook covers the geotechnical procedures used in manufacturing anchors and piles as well as for improving or underpinning foundations, securing existing constructions, controlling ground water, excavating rocks and earth works. It also treats such specialist areas as the use of geotextiles and seeding. - Until now there has been no comparable work in English that combines both theory and practice as brilliantly as does the Grundbau Taschenbuch. -
Geotechnical Engineering Handbook Volume 3: Elements and Structures Ulrich Smoltczyk (ed.)
2003. 646 pages, 500 figures, 58 tables. ISBN: 978-3-433-01451-6 205,- Euro / 280,- US$ About the book Volume 3 of this Handbook deals with foundations. It presents spread foundations starting with basic designs right up the necessary proofs. The section on pile foundations covers possible types of piles and their design, together with their load-bearing capacity, suitability, sample loads and testing. A further chapter explains the use, manufacture and calculation of caissons, illustrated by real-life examples. There is comprehensive coverage of the possibilities for stabilizing excavations, together with the relevant area of application, while another section is devoted to the useful application of trench walls. Shore protection is treated in a special contribution covering sheet pile walls, while all types of slope protection and retainments are described in detail with excellent illustrations. Two further contributions are devoted to the special topics of machine foundations and foundations in subsidence regions. The entire book is an indispensable aid in the planning and execution of all types of foundations found in practice, whether for academics or practitioners.
Special Price for Package Geotechnical Engineering Handbook Volumes 1 - 3 ISBN: 978-3-433-01452-3
550,- Euro / 680,- US$
Recommendations for the Design and Analysis of Earth Structures using Geosynthetic Reinforcements (EBGEO) Deutsche Gesellschaft f端r Geotechnik e.V. (ed.) March 2011. 338 pages, 112 figures, 26 tables. ISBN 978-3-433-02983-1 89,- Euro / 120,- US$ The profession has eagerly awaited these Recommendations for several years. - Completely revised and comprehensively extended code of practice for the design of geosynthetic-reinforced earth structures using the current generation of standards. About the book The completely revised and extended Recommendations deal with all questions relevant to the planning and dimensioning of geosynthetics-reinforced earth structures. In addition to the demands on materials and analysis principles, the applications of geosynthetics in a range of foundation systems, ground improvement measures, highways engineering projects, in slopes and retaining structures, and in landfill engineering are discussed.
Hardrock Tunnel Boring Machines Bernhard Maidl / Leonhard Schmid / Willy Ritz / Martin Herrenknecht 2008. 356 pages, 256 figures, 37 tables. ISBN: 978-3-433-01676-3 99,- Euro / 130,- US$
About the book This book covers the fundamentals of tunneling machine technology: drilling, tunneling, waste removal and securing. It treats methods of rock classification for the machinery concerned as well as legal issues, using numerous example projects to reflect the state of technology, as well as problematic cases and solutions. The work is structured such that readers are led from the basics via the main functional elements of tunneling machinery to the different types of machine, together with their areas of application and equipment. The result is an overview of current developments. Close cooperation among the authors involved has created a book of equal interest to experienced tunnelers and newcomers. Author Biography Bernhard Maidl has been Professor for Civil Engineering, Tunneling and Construction at the Ruhr-Universit채t in Bochum since 1974. In 1979 he founded the engineering firm Maidl und Maidl in Bochum, which is involved in many large and complex tunnel projects in Germany and abroad. Dr. Herrenknecht is the Founder and Chairman of the world's leading mechanized shield tunneling company. Leonhard Schmid is a planner of tunneling projects and manager of a Swiss engineering firm. Willy Ritz was formerly manager of a tunneling company in Switzerland and has a great deal of experience in the construction sector.
Mechanised Shield Tunnelling Bernhard Maidl / Martin Herrenknecht / Ulrich Maidl / Gerhard Wehrmeyer January 2012 2nd, completely revised and enlarged Edition 2012. 504 pages, 468 figures, 44 fig. Hardcover. ISBN 978-3-433-02995-4 119,- Euro / 165,- US$ - New edition completely revised and updated. - Overview of the fields of application of tunnel boring machines and their limitations. - Authors guarantee practical relevance and first-hand information. About the book This book presents the state of the art in mechanised shield tunnelling technology and the various types of equipment, and provides design approaches as well as structural advice. Other chapters treat drilling equipment, conveyors, tunnel securing, surveying and controlling as well as occupational safety. Contractual aspects and process controlling are also presented in detail.
The Austrian Art of Tunnelling in Construction, Consulting and Research Austrian Nat. Committee of ITA (ed.) 2008. 200 pages, 200 figures. ISBN: 978-3-433-02924-4 39,90 Euro / 55,- US$
About the book Austrian tunnel engineering is highly developed and has a excellent reputation worldwide in all areas including design, execution, innovative developments and training. A large number of demanding projects successfully completed in the past or currently posing new challenges for planners and contractors provide outstanding references for the Austrian tunnel engineering industry. The Austrian Art of Tunnelling aims to document the current state of the art. Short articles present current construction sites in Austria and abroad, their special features and the chosen solutions. In addition, internationally experienced consulting engineers discuss the design challenges for selected, particularly demanding projects. The book is rounded off by a clearly arranged overview of relevant technical/scientific organisations, associations and universities. The Austrian Art of Tunnelling is published by ITA Austria, Vienna, an umbrella organisation formed by five technical/scientific associations that represents Austrian interests in the International Tunnelling Association
Soil Dynamics with Applications in Vibration and Earthquake Protection Christos Vrettos will be published in Summer 2012 2012. approx. 200 pages, approx. 90 figures. Softcover. ISBN 978-3-433-02999-2 approx. 55,- Euro / 100,- US$ About the Book For numerous geotechnical applications soil dynamics are of special importance. In seismic engineering this affects the stability of dams, slopes, foundations, retaining walls and tunnels, while vibrations due to traffic and construction equipment represent a significant aspect in environmental protection. Foundations for mechanical equipment and cyclically loaded offshore structures are also part of the spectrum of application. This book covers the basics of soil dynamics and building thereon the practical applications in vibration protection and seismic engineering.
Special Deep Foundation.
Compendium Methods and Equipment. Volume I: Piling and Drilling Rigs (LRB Series) Liebherr-Werk Nenzing GmbH (ed.) 2008. 370 pages, 300 figures. ISBN 978-3-433-02905-3 89,- Euro / 120,- US$ - Comprehensive overview of the LIEBHERR equipment
Special Deep Foundation. Compendium Methods and Equipment. Volume II: Drilling machines and hydraulic crawler cranes (LB&HS Series)) Liebherr-Werk Nenzing GmbH (ed.) 2009. 336 pages, 297 figures, 43 tables. ISBN 978-3-433-02932-9 89,- Euro / 120,- US$ - Comprehensive overview of the LIEBHERR drilling machines and hydraulic crawler cranes
SET Price „Special Deep Foundation Volume I + Volume II“ ISBN: 978-3-433-02935-0 129,- Euro / 175,- US$ About the books The methods and equipment technology employed in the deep foundation industry have improved rapidly in recent years. The ingenuity of civil engineers, the results of new scientific research and the ongoing and new developments in machine technology have all led to the acceleration of this process. Applying technologies that have become very complex, and selecting the suitable machinery and equipment, demand ever more specialized knowledge and practical experience. It has become very difficult for users and manufacturers of special deep foundation machinery to maintain an overview of the level of technology in the sector. This compendium provides a comprehensive overview of the special deep foundation applications and processes. It is intended as an aid to planning and implementation, and aims to help practitioners, public authorities, engineering companies and students to broaden and complete their level of knowledge. It is targeted primarily at occupational engineers and applications in the field. The individual chapters discuss manufacturing techniques and potential applications, along with the associated machine components. The specifics of each method and machine technology are examined in detail.
New Edition is coming soon! „ Special Deep Foundation Compendium Methods and Equipment “ ISBN: 978-3-433-03026-4 approx. 129,- Euro / 175,- US$ introductory price approx. 149,-Euro / 200,-US$
Recommendations of the Committee for Waterfront Structures Harbours and Waterways (EAU 2004) Deutsche Gesellschaft f端r Geotechnik e.V. (ed.) Digitized and updated version 2009 ISBN 978-3-433-02928-2 119,- Euro / 165,- US$ The English edition of EAU 2004 contains the safety concept with partial safety factors in accordance with the Eurocodes and corresponding German standard. Compared to printed edition modifications adopted by technical annual reports since 2006 are incorporated into the CDROM. 2005. 660 pages, 251 figures, 43 tables. ISBN 978-3-433-01666-4 119,- Euro / 165,- US$ Recommendations with international reputation for design of harbours and waterways in a new edition About the book Since 1949 the "Committee for Waterfront Structures" has operated on honorary base as a committee of the Society for Harbour Engineering (HTG), Hamburg, and since 1951 also as working group of the German Society for Geotechnics (DGGT), Essen. Its full designation reads "Committee for Simplification an Standardization of Calculation and Construction of Waterfront Structures", which also outlines its goals. Following on from the previous joint publications, this new edition of EAU 2004 contains the safety concept with partial safety factors in accordance with the Eurocodes or the European prestandards as well as with the new edition of the corresponding German standard, partially differing on account of practice experiences.
Recommendations on Excavations - EAB, E2 Deutsche Gesellschaft f端r Geotechnik e.V. (ed.) 2008. 300 pages, 115 figures, 19 tables. ISBN 978-3-433-01855-2 69,- Euro / 100,- US$ The beginning of any building project is an excavation About the book The aim of these recommendations is to harmonize and further develop the methods, according to which excavations are prepared, calculated and carried out. Since 1980, these have been drawn up by the working group "Excavations" at the German Geotechnical Society (Deutsche Gesellschaft f端r Geotechnik DGGT) and are similar to a set of standards. They help to simplify analysis of excavation enclosures, to unify load approaches and analysis procedures, to guarantee the stability and serviceability of the excavation structure and its individual components, and to find out an economic design of the excavation structure. For this new edition, all recommendations have been reworked in accordance with EN 1997-1 (Eurocode 7) and DIN 1054-1. In addition, new recommendations on the use of the modulus of subgrade reaction method and the finite element method (FEM), as well as a new chapter on excavations in soft soils, have been added.
Anchorage in Concrete Construction Rolf Eligehausen / Rainer MallĂŠe / John F. Silva 2006. 378 pages, 465 figures, 33 tables. ISBN: 978-3-433-01143-0 99,- Euro / 160,- US$ - up-to-date and comprehensive work on the subject - illustration of the effects of different fastening systems - overview of the applications for different fastening systems - assistance in gaining approval for structural calculations - current European and American Standards are referred About the book A comprehensive treatment of current fastening technology using inserts (anchor channels, headed stud), anchors (metal expansion anchor, undercut anchor, bonded anchor, concrete screw and plastic anchor) as well as power actuated fasteners in concrete. It describes in detail the fastening elements as well as their effects and load-bearing capacities in cracked and noncracked concrete. It further focuses on corrosion behaviour, fire resistance and characteristics with earthquakes and shocks. It finishes off with the design of fastenings according to the European Technical Approval Guideline (ETAG 001), the Final Draft of the CEN Technical Specification 'Design of fastenings for use in concrete' and the American Standards ACI 318-05, Appendix D and ACI 349-01, Appendix B.
Precast Concrete Structures Hubert Bachmann / Alfred Steinle July 2011 272 pages, 263 figures, 15 tables. ISBN: 978-3-433-02960-2 79,- Euro / 110,- US$
- up-to-date summary of the current level of technology - help in selecting the bridge support - assistance in gaining approval for structural calculations About the book Bearings are used in the construction of bridges, for the distribution of loads between different elements and for compensating stresses. This volume describes their construction, function, calculation and applications, and is supplemented by normative regulations and research results. The book takes account of EN 1337 standards, which are binding on a European level. It also takes into account the latest experiences gained in practice as well as on the basis of recent tests, and includes examples for the correct placing of bearings and dampers.
Failed Bridges
Case Studies, Causes and Consequences Joachim Scheer 2010. 307 pages, 170 figures, 20 tables. ISBN: 978-3-433-02951-0 79,- Euro / 110,- US$ About the book When bridges fail, often with loss of human life, those involved may be unwilling to speak openly about the cause. Yet it is possible to learn from mistakes. The lessons gained lead to greater safety and are a source of innovation. This book contains a systematic, unprecedented overview of more than 500 bridge failures assigned to the time of their occurrence in the bridges' life cycle and to the releasing events. Primary causes are identified. Many of the cases investigated are published here fpr the first time and previous interpretations are shown to be incomplete or incorrect. A catalogue of rules that can help to avoid future mistakes in design analysis, planning and erection is included. A lifetime's work brilliantly compiled and courageously presented - a wealth of knowledge and experience for every structural engineer.
The World of Footbridges Klaus Idelberger March 2011 183 pages, 351 figures. ISBN: 978-3-433-02943-5 69,- Euro / 95,- US$ Systematic overview, especially for structural engineers About the book Structural engineers are often more interested in spectacular road and rail bridges with enormous spans than in relatively narrow footbridges built for modest loads. Local authorities, on the other hand, see pedestrian and cycle bridges in inner-city or rural locations as vital connections and important features of the town or landscape. Designs are often selected on the basis of architectural competitions. As there are no official guidelines for the planning of footbridges, the building techniques and performance of existing bridges are an important source of information and inspiration for structural engineers, architects and city or rural planners. This book contains 85 examples of footbridges built worldwide over the past three decades and includes open pedestrian and cycle bridges, utility bridges and skywalks in many different environments. The collection is arranged according to load bearing system and span length. There is a brief description of the location and structural system of each bridge illustrated by photographs, plans, elevations and in some cases construction details. It is a treasure trove for bridge builders.
Cable-Stayed Bridges Holger Svensson will be published in May 2012 2012. approx. 450 pages, approx. 800 figures in colour. Hardcover ISBN: 978-3-433-02992-3 approx. 129,- Euro / approx. 190,- Euro About the book Around the world large-scale bridges are needed and being built for infrastructure projects, since the 1970s many of them are cable-stayed bridges. This book describes the fundamentals of all phases of design, detailed design and actual erection and uses 250 built examples to illustrate various aspects. The chapters on cables and erection are a main focus of this work as they represent the most important difference to other types of bridges. The bridge examples were chosen according to the following criteria: bridges in which the author was personally involved or where the engineering office of Leonhardt, Andr채 und Partner (LAP) had significant involvement as well as those bridges with special constructive features or record span lengths. The most important design engineers are also presented.
Integral and Semi-Integral Bridges Martin P. Burke Jr. 2009. 272 pages. Hardcover ISBN: 978-1-4051-9418-1 Wiley Blackwell 99,- Euro / 149,99 US$
About the book Worldwide, integral type bridges are being used in greater numbers in lieu of jointed bridges because of their structural simplicity, economy, and durability. Written by a practicing bridge design engineer from the USA who has spent his career involved in the origination, evaluation and design of such bridges, this book shows how the analytical complexity due to the elimination of movable joints can be minimized to negligible levels so that most moderate length bridges can be easily and quickly modified or replaced with either integral or semi-integral bridges. For more Wiley books in Construction see www.wiley.com. Then click "Engineering & Material Sciences" and go to "Civil Engineering".
Design of Steel Structures
Eurocode 3: Design of steel structures. Part 1-1: General rules and rules for buildings. ECCS - European Convention for Constructional Steelwork (ed.) 2010. 446 pages, 295 figures, 105 tables. ISBN: 978-3-433-02973-3 70,- Euro / 95,- US$ About the book This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.
Design of Plated Structures.
EC 3: Design of Steel Structures. Part 1-5: Design of Plated Structures. ECCS (ed.) 2011 272 pages, 139 figures. Softcover. ISBN: 978-3-433-02980-0 55,- Euro / 75,- US$ About the book The main aim of this book is to provide practical advice to designers of plated structures for correct and efficient application of EN 1993-1-5 design rules. In chapter 1 the purpose, the scope and the structure of the book is explained. In chapter 2 a rather detailed and commented overview of EN 1993-1-5 design rules is given following the structure of the standard. Shear lag effect as well as plate buckling problems due to direct stresses, shear forces, transverse forces and interactions of these effects are covered. This chapter also includes a reduced stress method and a finite element analysis approach to plate buckling problems. A large number of design examples illustrate the proper application of individual design rules. Chapter 3 and 4 bring two complete design examples on a crane runway and a box-girder bridge.
Fire Design of Steel Structures
EC 1: Actions on Structures. Part 1-2: Actions exposed to fire. EC 3: Design of steel structures. Part 1-2: Structural fire design ECCS (ed.) 2010. 428 pages, 134 figures, 21 tables. ISBN: 978-3-433-02974-9 70,- Euro / 95,- US$ About the book This book explains and illustrates the rules that are given in the Eurocode for designing steel structures subjected to fire. After the first introductory chapter, Chapter 2 explains how to calculate the mechanical actions (loads) in the fire situation based on the information given in EN 1990 and EN 1991. Chapter 3 presents the models to be used to represent the thermal action created by the fire. Chapter 4 describes the procedures to be used to calculate the temperature of the steelwork from the temperature of the compartment and Chapter 5 shows how the information given in EN 1993-1-2 is used to determine the loan bearing capacity of the steel structure. The methods use to evaluate the fire resistance of bolted and welded connections are described in Chapter 7. Chapter 8 describes a computer program called "Elefir-EN" which is based on the simple calculation model given in the Eurocode and allows designers to quickly and accurately calculate the performance of steel components in the fire situation. Chapter 9 looks at the issues that a designer may be faced with when assessing the fire resistance of a complete building. This is done via a case study and addresses most of the concepts presented in the earlier Chapters. The concepts and fire engineering procedures given in the Eurocodes may see complex those more familiar with the prescriptive approach. This publication sets out the design process in a logical manner giving practical and helpful advice and easy to follow worked examples that will allow designer to exploit the benefits of this new approach to fire design.
Fatigue Design of Steel and Composite Structures. EC 3: Design of Steel Structures. Part 1-9: Fatigue. EC 4: Design of Composite Steel and Concrete Structures. ECCS (ed.) 311 pages, 250 figures. Softcover. ISBN: 978-3-433-02981-7 55,- Euro / 75,- US$
About the book This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.
Design of Cold-formed Steel Structures.
EC 3: Design of Steel Structures. Part 1-3: Design of Cold-formed Steel Structures. ECCS (ed.) will be published in I. Quarter 2012 approx. 550 pages, approx. 300 figures. Softcover. ISBN: 978-3-433-02979-4 approx. 70,- Euro / approx. 95,- US$ About the book The book is concerned with design of cold-formed steel structures in building based on the Eurocode 3 Package, particularly on EN 1993-1-3. It contains the essentials of theoretical background and design rules for cold-formed steel sections and sheeting, members and connections for building applications. Elaborated examples and design applications - more than 200 pages - are included in the respective chapters in order to provide a better understanding to the reader.
Design of Connections in Steel and Composite Structures. EC 3: Design of Steel Structures. Part 1-8 – Design of Joints. EC 4: Design of Composite Steel and Concrete Structures. ECCS (ed.) will be published in II. Quarter 2012 approx. 500 pages, approx. 300 figures. Softcover. ISBN: 978-3-433-02985-5 approx. 70,- Euro / approx. 95,- US$ About the book This volume elucidates the design rules for connections in steel and composite structures which are set out in Eurocode3 and 4. Numerous examples illustrate the application of the respective design rule.
Further planned titles with ECCS: Design of Composite Structures. will be published III. Quarter 2012 approx. 350 pages, approx. 200 figures, Softcover. ISBN: 978-3-433-3008-0 approx. 55,- Euro / approx. 75,- US$
Fire Design of Composite Structures. will be published end of 2012 ISBN: 978-3-433-03009-7
Design of Steel Structures for Buildings in Seismic Areas. ISBN: 978-3-433-03010-3
Steel Designers´ Manual SCI - Steel Construction Institute 7th edition will be published in February 2012 2011. approx. 1240 pages. Hardcover. ISBN 978-1-4051-8940-8 Wiley-Blackwell 142,- Euro / 175,- US$
- Fully revised to comply with the new EUROCODE standards - Packed full of tables, analytical design information and worked examples - Contributors number leading academics, consulting engineers and fabricators - 'A must for anyone involved in steel design' - Journal of Constructional Steel Research About the book This classic manual on structural steelwork design was first published in 1955. Since then it has sold tens of thousands of copies worldwide. Fully revised to comply with the new Eurocode standards, the Seventh Edition is fully revised to reflect current approaches and best practices and brought in to compliance with EN 1993: Design of Steel Structures. The Steel Designers' Manual continues to provide structural engineers and students the essential knowledge for the design of conventional steelwork in one volume.
Steel Detailers´ Manual Alan Hayward / Frank Weare / A.C. Oakill 3rd edition 2011. 184 pages. Hardcover ISBN: 978-1-4051-7521-0 Wiley-Blackwell 89,90 Euro / 115,- US$
About the book This highly illustrated manual provides practical guidance on structural steelwork detailing. Examples of structures include single and multi-storey buildings, towers and bridges. The detailing shown will be suitable in principle for fabrication and erection in many countries, and the sizes shown will act as a guide to preliminary design. The third edition has been revised to take account of the new Eurocodes on structural steel work, together with their National Annexes. The new edition also takes account of developments in 3-D modelling techniques and it includes more CAD standard library details. For more Wiley books in Construction see www.wiley.com. Then click "Engineering & Material Sciences" and go to "Civil Engineering".
Structural Bearings Helmut Eggert /Wolfgang Kauschke 2002. 393 pages, 272 figures, 45 tables. ISBN 978-3-433-01238-3 99,- Euro / 135,- US$
- up-to-date summary of the current level of technology - help in selecting the bridge support - assistance in gaining approval for structural calculations About the book Bearings are used in the construction of bridges, for the distribution of loads between different elements and for compensating stresses. This volume describes their construction, function, calculation and applications, and is supplemented by normative regulations and research results. The book takes account of EN 1337 standards, which are binding on a European level. It also takes into account the latest experiences gained in practice as well as on the basis of recent tests, and includes examples for the correct placing of bearings and dampers.
Steel Structures Rolf Kindmann / Matthias Kraus 2011. 552 pages, 365 figures, 90 tables. Softcover. ISBN: 978-3-433-02978-7 59,- Euro / 95,- US$
About the book The user shall become familiar with computer-oriented design methods for steel-constructions. Therefor the suitable and applicable methods are to be emphasized. For that reason the basic principles of steel construction are introduced as well. From the content: - Principles of the FEM - FEM for Linear Calculations of Lattice Structures - FEM for Nonlinear Calculations of Lattice Structures - Plastic Cross Section Bearing Capacity - Verification of Beams: Second Order Theory and Stability - FEM for Plane Load-Bearing Structures - FEM for Beam Cross Sections
Stadium Atlas.
Technical Recommendations for Grandstands in Modern Stadia Stefan Nixdorf 2008. 368 pages, 695 figures. ISBN 978-3-433-01851-4 79,- Euro / 110,- US$ Unique technical guide of planning stadia combining the requirements of different decision authorities - based on actual European building codes and guidelines of sports associations - neutral from architectural point of view - at present numerous new stadia are planned world-wide (South Africa, China) About the book This Stadium ATLAS is a building-type planning guide for the construction of spectator stands in modern sports and event complexes. A methodological comparison of the venues of the FIFA World Cup 2006 in Germany continues into a catalogue of "Technical recommendations and requirements" for the new erection or the modernization of multi-functional sports arenas on the basis of current European building regulations. The main focus lies on all essential and relevant aspects of planning and developing future concepts for the construction of grandstands. - This Stadium ATLAS is a building-type planning guide for the construction of spectator stands in modern sports and event complexes. The principles of building regulations and the guidelines of important sports associations are analyzed and interrelated. -
Tensile Surface Structures.
A Practical Guide to Cable and Membrane Construction. Materials, Design, Assembly and Erection Michael Seidel 2009. 2400 pages, 368 figures. ISBN 978-3-433-02922-0 99,- Euro / 135,- US$ Special multi-disciplinary knowledge with practical orientation This book is the first synopsis of the specialized and multi-disciplinary knowledge from structural engineers and architects, from manufacturers and material producers as well as from steelwork and cable assembly companies. It enables planners to go the optimized way in their projects. About the book Tensile surface structures are the visual expression of an intensive examination of the topic of building envelopes in architecture. Advances in design methods, materials, construction elements and assembly and erection planning within the field of lightweight building construction are enabling ever more exacting applications of tensile structures with spatial and structural functions, especially in roofing large column-free areas. - The mechanical characteristics of the materials used raise the question of "buildability". This book provides answers by discussing the fundamental influence of material manufacture and assembly in deciding the most suitable type of building or structure and its detailing. -
The History of the Theory of Structures.
From Arch Analysis to Computational Mechanics Karl-Eugen Kurrer 2008. 848 pages, 500 figures. ISBN 978-3-433-01838-5 119,- Euro / 165,- US$ This book really is a gift to all civil engineers Find out what you always wished to know about structural analysis - English edition of the successful German edition of 2002, updated and enlarged About the book This major work is about much more than the origins of statics and its use in building and bridge engineering since the late sixteenth century. It is also about the very ideas of "statics" and "strength of materials" and how they came to be an integral part of the engineer's life; how they were developed into an academic discipline; how they became the subject of growing numbers of technical books and periodicals; and, ultimately, how the epistemology of the subject developed. Drawing on a long series of specialized articles and more than two decades of study, the author begins each chapter with a personal reflection on his involvement with the subject under discussion. He demonstrates how engineering thought, far from being abstractly objective, is imbued with the character of its thinkers, their teachers, and their pupils. Kurrer also includes short biographies of over one hundred engineers who made major contributions to advances in structural theory and practice, most of which are illustrated by portraits, and the whole is backed by an extensive bibliography. Author Biography Dr.-Ing. Karl-Eugen Kurrer is Editor-in-Chief of the journal Stahlbau (steel construction), Berlin, since 1996. For more then 25 years Kurrer is working on the history of the theory of structures and structural analysis in the scientific and technological historical context. His numerous articles and presentations as well as his activities for the German Association of Engineers (VDI) met good response and motivated this book. - This major work is about more than the origins and use of statics, it is also about the very ideas of "statics" and "strength of materials and how they came to be a part of the engineer´s life. Fully referenced, with short biographies of over 180 important engineers. This book has over 40 reviews from known authors and engineers - mostly positive. For more information see: http://www.ernst-und-sohn.de/en/the-history-of-the-theory-of-structures
Steel Construction – Design and Research Volume 5, 2012. 4 issues per year. Published in English. Editor in chief: Dr.-Ing. Karl-Eugen Kurrer Annual subscription 2011 (print + online for companies) 178,- Euro net / 279,- US$ Steel Construction unites in one journal the holistic approach to steel construction. In the interests of “construction without depletion“, – it skillfully combines steel with other forms of construction employing concrete, glass, cables and membranes to form integrated systems. This journal is therefore aimed at all structural engineers, whether active in research or practise. The journal publishes peer-reviewed papers covering the entire fi eld of steel in construction. The scientific and technical papers in Steel Construction are primary publications. An internationally renowned Editorial Board assures a highly interesting selection of topics and guarantees the high standard of the contributions. Steel Construction is the official journal for ECCS members (European Convention for Constructional Steelwork)
Structural Concrete Journal of the fib Volume 13, 2012. 4 issues per year. Published in English. Editor: Luc Taerwe (Belgium) Deputy Editor: Steinar Helland (Norway) Annual subscription 2011 (print + online for companies) 138,- Euro net / 171,- US$ Structural Concrete, the official journal of the fib, provides conceptual and procedural guidance in the field of concrete construction, and features peer-reviewed papers, keynote research and industry news covering all aspects of the design, construction, performance in service and demolition of concrete structures. Starting in January 2011 it will be part of the journals portfolio of Berlin-based publishing house Ernst&Sohn. A membership with the fib - International Federation for Structural Concrete, includes the delivery of the journal print and online.
Geomechanics and Tunnelling Volume 5, 2012. 6 issues per year. Published bilingual in English and German. Editor: Österreichische Gesellschaft für Geomechanik Editor in chief: Dr.-Ing. Helmut Richter Annual Subscription 2011 (print + online) 144,- Euro net / 215,- US$ ■Geomechanics and Tunnelling, the journal for engineering geology, rock and soil mechanics, foundation engineering and tunnelling. The single issues are focussed journals, dedicated to a current topic or a special project. Brief news, reports on construction sites and reports on conferences complete the content. Geomechanics and Tunnelling is published bi-lingual in German and English. An internationally renown editorial board assures a most interesting selection of topics and guarantees a high standard of the contributions. Geomechanics and Tunnelling is the official journal for OeGG members (Austrian Society for Geomechanics)
250.000 individual articles Specialist articles from all Ernst & Sohn journals can be looked up in the articles database, displayed in PDF form and purchased immediately. www.ernst-und-sohn.de/article-database
Ernst & Sohn Newsletter Information about new publications of the publishing house as well as facts worth knowing about engineering standards,legal items or general information about the engineering sector. Register here: www.ernst-und-sohn.de/newsletter
Wiley Online Library The range of WOL covers more than 1,500 journals, 9,000 books and about 125 multi-volume handbooks and encyclopedia: www.wileyonlinelibrary.com
Social Media @ Ernst & Sohn Contact us! http://twitter.com/ErnstundSohn www.facebook.com/ErnstundSohn Google+ (https://plus.google.com/114623805914404593261) RSS-Feed: www.ernst-und-sohn.de/rss
Order Form Quantity
Order Number
Title of Book
Price in â‚Ź
978-3-433-01841-5
Building Physics - Heat, Air and Moisture
59,-
978-3-433-02962-6
Applied Building Physics
59,-
978-3-433-02962-6
SET: Building + Applied Building Physics
99,-
978-3-433-03022-6
Performance Based Building Design 1
approx. 59,-
978-3-433-03024-0
SET: Perf. Based Building Design 1+ 2
approx. 99,-
978-1-4051-9253-8
Architects´ Data
approx. 77,90
978-3-433-01676-3
Geotechnical Engineering Handbook Volume 1: Fundamentals Geotechnical Engineering Handbook Volume 2: Procedures Geotechnical Engineering Handbook Volume 3: Elements and Structures SET: Geotechnical Engineering Handbook Volume 1-3 Recom. for the Design and Analysis of Earth Structures using Geosynthetic Reinforcements (EBGEO) Hardrock Tunnel Boring Machines
978-3-433-02995-4 978-3-433-02924-4 978-3-433-02999-2
Mechanised Shield Tunnelling The Austrian Art of Tunnelling Soil Dynamics
978-3-433-02905-3
Special Deep Foundation. Volume I
89,-
978-3-433-02932-9
Special Deep Foundation. Volume II
89,-
978-3-433-02935-0
SET: Special Deep Foundation Volume I+II
978-3-433-03026-4
978-3-433-01143-0
Special Deep Foundation. NE: Intro-Price: Recom. of the Committee for Waterfront Structures - Harbours + Waterways (EAU 2004) Recommendations EAU - digitized and updated version 2009 Anchorage in Concrete Construction
978-3-433-02960-2
Precast Concrete Structures
79,-
978-3-433-02951-0
Failed Bridges
79,-
978-3-433-02943-5
The World of Footbridges
69,-
978-3-433-02992-3
Cable-Stayed Bridges
978-1-4051-9418-1
Integral and Semi-Integral Bridges
99,-
978-3-433-02973-3
Design of Steel Structures
70,-
978-3-433-02980-0
Design of Plated Structures
55,-
978-3-433-02974-9
Fire Design of Steel Structures
70,-
978-3-433-01449-3 978-3-433-01450-9 978-3-433-01451-6 978-3-433-01452-3 978-3-433-02983-1
978-3-433-01666-4 978-3-433-02928-2
205,205,205,550,89,99,119,39,90 approx. 55,-
129,approx. 129,119,119,99,-
approx. 129,-
978-3-433-02981-7
Fatigue Design of Steel and Composite Structures
55,-
978-3-433-02979-4
Design of Cold-formed Steel Structures
approx. 70,-
978-3-433-02985-5
Design of Connections in Steel and Composite Structures
approx. 70,-
978-1-4051-8940-8
Steel Designers´ Manual
142,-
9798-1-4051-7521-0 Steel Detailers´ Manual
89,90
978-3-433-01238-3
Structural Bearings
99,-
978-3-433-02978-7
Steel Structures
59,-
978-3-433-01851-4
Stadium Atlas
79,-
978-3-433-02922-0
Tensile Surface Structures
99,-
978-3-433-01838-5
The History of the Theory of Structures
2489
Sample Copy of Steel Construction
For free
2084
Sample Copy Structural Concrete
For free
2478
Sample Copy Geomechanics & Tunnelling
For free
906132
Publishing index of Ernst & Sohn
For free
Monthly email Newsletter in English
For free
Fax Order Form to: +49 - (0)30 / 47031 - 240
119,-
- Ernst & Sohn, Berlin
We guarantee you the right to revoke this order within two weeks. Please mail to Verlag Ernst & Sohn, Wiley-VCH, Boschstr. 12, D-69469 Weinheim. _________________________________________________________________________________________________________________
Company / Institution ________________________________________________ ________________________________ Contact Person VAT-No. __________________________________________________________________________________ Street, No. _______________________________________________ _______________________________ Postcode, Town Country _______________________________________________ _______________________________ Phone Fax __________________________________________________________________________________ email ____________________________________________________________
Date / Signature *In EU countries the local VAT is effective for books and journals. Postage will be charged. Whilst every effort is made to ensure that the contents of this leaflet are accurate, all information is subject to change without notice. Our standard terms and delivery conditions apply. Prices are subject to change without notice. Date of Information: Feb. 2012 Wilhelm Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG Rotherstraße 21, 10245 Berlin, Germany, www.ernst-und-sohn.de
www.ernst-und-sohn.de