E 0019 krups f054

Page : 1 of 3

MATERIAL SAFETY DATA SHEET

Revised edition no : 1 Date : 29 / 4 / 2009 Supersedes : 0 / 0 / 0

Krups Anticalc Kit F54 DKB à 1 x 40g Fr

REACH

Producer

Distributor

ESWA AG Rotzbergstrasse 1 CH-6362 Stansstad Switzerland Herr R. Müller +41 41 619 72 72 info@eswa.ch In case of emergency : Tox Zentrum +41 44 251 51 51

ESWA AG Rotzbergstrasse 1 CH-6362 Stansstad Switzerland Herr R. Müller +41 41 619 72 72 info@eswa.ch In case of emergency : Tox Zentrum +41 44 251 51 51

1 IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING Trade name Application Responsible for placing on the market

: Krups Anticalc Kit F54 DKB à 1 x 40g Fr. : Deliming agent This product is intended for public and professional use. : See address above.

2 HAZARDS IDENTIFICATION Hazards identification

: Irritating to eyes.

Symptoms relating to use - Eye contact

: Redness, pain.

3 COMPOSITION / INFORMATION ON INGREDIENTS : Substance.

Substance / Preparation

Substances presenting a health or environmental hazard (Directive 67/548/EEC) : Substance name

CITRIC ACID

:

Value(s) Between 50 and 100 %

CAS No 77-92-9

EC No 201-069-1

Index No -----

Classification Xi; R36

4 FIRST AID MEASURES General information - Inhalation - Skin contact - Eye contact - Ingestion

: : : :

Seek medical attention if ill effect or irritation develops.

Remove victim to fresh air.

Rinse immediately with plenty of water. Seek medical attention if burns develop.

In case of eye contact, immediately rinse with clean water for 10-15 minutes.

Obtain medical attention if pain, blinking or redness persist. : If swallowed, do not induce vomiting : seek medical advice immediately and show this container or label. If swallowed, rinse mouth with water (only if the person is conscious).

5 FIRE-FIGHTING MEASURES Hazardous combustion products

: In case of heating or fire the formation of toxic gases is possible.

All known extinguishants can be used.

Special protective equipment for fire : Wear suitable respiratory equipment. fighters

ESWA AG Rotzbergstrasse 1 CH-6362 Stansstad Switzerland Herr R. Müller +41 41 619 72 72 info@eswa.ch

Page : 2 of 3

MATERIAL SAFETY DATA SHEET

Revised edition no : 1 Date : 29 / 4 / 2009 Supersedes : 0 / 0 / 0

Krups Anticalc Kit F54 DKB à 1 x 40g Fr

REACH

6 ACCIDENTAL RELEASE MEASURES Personal precautions Clean up methods

: Ensure adequate air ventilation. : On land, sweep or shovel into suitable containers.

7 HANDLING AND STORAGE Handling Storage

: Wash hands and other exposed areas with mild soap and water before eat, drink or smoke and when leaving work. : Keep container tightly closed. Keep away from foodstuffs.

8 EXPOSURE CONTROLS / PERSONAL PROTECTION General hygiene Personal protection - Respiratory protection - Skin protection - Eye protection

: General job hygiene consider; soiled clothes immediately take off; with the work do not smoke. : Avoid all unnecessary exposure. : No special protection required where adequate ventilation is maintained. : Wear gloves. : Wear eye protection.

9 PHYSICAL AND CHEMICAL PROPERTIES Physical state at 20 °C Colour Odo(u)r Density Solubility in water

: : : : :

Powder.

White.

Odourless.

1.665 g/cm3 61.8 %

10 STABILITY AND REACTIVITY Stability and reactivity Hazardous decomposition products Materials to avoid

: Stable under normal conditions. : None under normal conditions. : Strong bases.

11 TOXICOLOGICAL INFORMATION With the product as such no toxicological tests have been done. According to the criteria of 1999/45/EC this product is not toxic. Components that are toxic are mentioned in section 3.

12 ECOLOGICAL INFORMATION With the product as such no ecotoxicological tests have been done.According to the criteria of 1999/45/EC this product is not dangerous for the environment. Components that are dangerous to the environment are mentioned in section 3.

13 DISPOSAL CONSIDERATIONS General Disposal method

: Comply with local regulations for disposal. : On land, sweep or shovel into suitable containers.

ESWA AG Rotzbergstrasse 1 CH-6362 Stansstad Switzerland Herr R. Müller +41 41 619 72 72 info@eswa.ch

Page : 3 of 3

MATERIAL SAFETY DATA SHEET

Revised edition no : 1 Date : 29 / 4 / 2009 Supersedes : 0 / 0 / 0

Krups Anticalc Kit F54 DKB à 1 x 40g Fr

REACH

14 TRANSPORT INFORMATION General information

: Not classified according to ADR/RID.

15 REGULATORY INFORMATION - Symbol(s)

Contains - R Phrase(s) - S Phrase(s)

: : : :

Xi : Irritant.

Citric acid anhydrous R36 : Irritating to eyes.

S2 : Keep out of the reach of children.

S26 : In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S46 : If swallowed seek medical advice immediately and show this container or label.

16 OTHER INFORMATION : 06.00114.03.1 (DW 30.09.2008) Further information List of relevant R phrase (heading 3) : R36 : Irritating to eyes.

Safety data sheet available for professional user on request. : The data given here is based on current knowledge and experience. The purpose DISCLAIMER OF LIABILITY of this Safety Data Sheet is to describe the products in terms of their safety requirements. The data does not signify any warranty with regard to the products’ properties. : Major changes in the text compared to former version are indicated with *.

Revision : ME Prepared by Content and format of this data sheet on product security (MSDS) are in accordance with the Directive (EU) 1907/2006.

DISCLAIMER OF LIABILITY The information within this MSDS referres to reliable sources. The correctness of the information, in printed or suggested form, is not ensured. The conditions or methods of the handling, storage, use or disposal of the product lie outside of our control, and possibly also outside of our information area. For this and other reasons we take no responsibility and reject expressly liability for loss, damage or expenses, which could develop from the applicaton, storage, use or disposal of the product or with it are connected in any way. This MSDB was prepared for this product and may be only used thereby. If the product should be used as a component of another product, then these MSDB information does probably not apply.

End of document

ESWA AG Rotzbergstrasse 1 CH-6362 Stansstad Switzerland Herr R. Müller +41 41 619 72 72 info@eswa.ch