Mesca vol 8 lowres by Executive Media

2014

Volume 8

MINE SPEC READY

Ready for any location. • Specialists in the Australian Infrastructure and Resources sector. • A modern rental fleet of close to 3,600 4WDs, 2WDs, trucks, buses and specialised vehicles. • Over 150 qualified mechanical staff that keep our fleet moving on your site, through our mobile servicing or at our branch network. • With a network of 17 locations strategically placed across Australia, our coverage is amongst the widest in the industry. • We provide maintenance services in high demand locations to keep your fleet running.

For more information call your local Sargent representative on 1300 SARGENT.

www.sargent.com.au

volume 8

2014

Contents Chairman’s Introduction 2 Executive Officer’s Foreword 4 MESCA Vision Statement 5 MESCA Member Services 5 MESCA Members’ Capability Matrix

6 – 13

MESCA Suppliers’ Buying Guide

14 – 159

Australian Industry Group

Published by:

PO Box 128, SPRING HILL QLD 4004 Tel: (07) 3244 1777 Fax: (07) 3244 1796 Email: info@mesca.com.au | Website: www.mesca.com.au

ABN 30 007 224 204

Brisbane 202 Boundary Street, SPRING HILL QLD 4004

430 William Street, Melbourne VIC 3000 Tel: (03) 9274 4200 Fax: (03) 9329 5295 Email: media@executivemedia.com.au Web: www.executivemedia.com.au

The editor, publisher, printer and their staff and agents are not responsible for the accuracy or correctness of the text of contributions contained in this publication or for the consequences of any use made of the products, and the information referred to in this publication. The editor, publisher, printer and their staff and agents expressly disclaim all liability of whatsoever nature for any consequences arising from any errors or omissions contained in this publication, whether caused to a purchaser of this publication or otherwise. The views expressed in the articles and other material published herein do not necessarily reflect the views of the editor and publisher or their staff or agents. The responsibility for the accuracy of information is that of the individual

contributors and neither the publisher nor editors can accept responsibility for the accuracy of information that is supplied by others. It is impossible for the publisher and editors to ensure that the advertisements and other material herein comply with the Competition and Consumer Act 2010 (Cth). Readers should make their own inquiries in making any decisions and, where necessary, seek professional advice. © 2014 Executive Media Pty Ltd. All rights reserved. Reproduction in whole or part without written permission is strictly prohibited.

MESCA MEMBERS DIRECTORY VOL 8 • 1

MESCA SUPPLIERS Industry Buying Guide

Chairman’s Introduction It is very pleasing to note that our membership continues to grow and display the diverse range of competencies required by the mining, mineral processing and energy sector in this country. It is particularly pleasing to see our growth in west Australia and welcome all new members to our national industry support group. MESCA’s unique offering is still as vital in today’s market, if not more so, than at its inception some 14 years ago. Our briefings offer you all the opportunity to get firsthand information on current projects, and with more and more competition being introduced into this market, it can only be of benefit. People still do business with people. The response and support from our briefing proponents has again been at a high level, and their response to us after the briefings has been that they are grateful for being given the opportunity to present and network with industry, and in many cases have asked to carry out project update briefings as they progress through to completion. We believe that the coming year will present industries associated with MESCA real opportunities and certainly periods of major change, with the car industry in a wind-down stage, and the government’s indication that it will be supporting projects that create jobs and contribute to the economy to help manufacturing. We all need to ensure that the government is aware of just how vital the support industries to the mining and energy sectors are, and some of the development infrastructure needed in Australia assists proponents, particularly juniors and mid-caps ‘to get their projects up’. The energy industry continues to fascinate and change, particularly the growing range of CSG, UCG and LNG, or, more to the point, ‘green energy projects’, which have drawn interest in the Association from another range of suppliers who are able to operate in this highly regulated sector. Some of our new members are companies with international experience and have been working in this space for some time, while others are looking closely at what opportunities lay here for them.

2 • MESCA MEMBERS DIRECTORY VOL 8

As Chairman of MESCA, I am proud of what has been achieved: the way MESCA has assisted its members and the greater supply community. Australian suppliers of products and services have delivered the most innovative solutions in the world to the mining operations, mineral processing and energy plants. Australia is one of the most favoured countries in the world when it comes to its resources; extracting the wealth of these resources requires leadingedge products and services. There is no doubt that automation provides the safest, most efficient and most environmentally aware mineral and energy operations. This is the area that Australian companies are focused on and the ‘output per employee’ demonstrates our world status. This is where the ingenuity of Australian suppliers of products and services now encompasses the world market. Due to the collaboration within the Australian resources sector between the mineral extracting companies and their suppliers in the recovery and utilisation of Australia’s precious resources, this same technology is now in great demand across the globe. MESCA members must continue to embrace the challenges of the minerals and energy sector and look forward to providing the highest value in the safest manner. Bob Townsend Chairman

Powerful solutions for the mining industry As a global provider of automation solutions, Endress+Hauser has the necessary expertise to deliver robust and reliable field devices as well as customised solutions and services. Our industry-optimized packages enable you to lower energy and process costs efficiently and comply with environmental requirements. Reliable flow measurement of slurries: The highly abrasion resistant natural rubber (NR) liner and unique brush electrodes of the Promag 55 S magnetic flow meter provide dependable measurement even with high solids content. Unique integrated solids content flow computation is obtained when combined with the Gammapilot M radiometric density meter. Pressure measurement without wear and tear: The overload-resistant ceramic membrane of the Cerabar S is ideal for density measurement in thickeners. pH/ORP measurement reduces calibration time: Compact, robust electrodes using Memosens technology turns every measurement point into a digital sensor with integrated memory used in flotation cells or tailing applications. www.endress.com/primaries

Endress+Hauser Australia Pty Ltd Level 1, 16 Giffnock Ave Macquarie Park, NSW 2113 Australia

Phone 1800 ENDRESS Fax 02 8877 7099 marketing@au.endress.com www.endress.com.au

MESCA SUPPLIERS Industry Buying Guide

Executive Officer’s Foreword The Mining & Energy Services Council of Australia (MESCA) is an industry body committed to maximising domestic content and Australian industry participation on major mining and energy projects, while encouraging a dynamic, competitive and unified minerals and energy sector in Australia.

Big changes and challenges

During the 2013 calendar year, MESCA delivered 15 major project briefings in many locations all over Australia, which was another improvement on the previous year. Over the next 12 months, our members will enjoy the same briefing frequency or better. At the same time, in partnership with the CSIRO, MESCA again worked closely with IMR (Industrial Market Research) to expand their comprehensive equipment survey of Queensland coal mine sites to include other mineral activities around Australia. These detailed survey reports will assist our members to efficiently target their development activities geographically, armed with knowing which of their products and services are compatible with the capital equipment and maintenance schedules of major coal facilities statewide.

The last 12 months have seen extraordinary changes to the political environment, with three prime ministers and two opposition leaders during that time. We will not know the voting structure of the Senate and their attitude toward supply until after July 2014, but this will have a crucial impact on the new government’s ability to deliver on their widely discussed reform agenda.

Another achievement of particular benefit to our Western Australian constituents has been the appointment of a full-time Business Development Executive, Mark Bolland. Mark is based in Perth and will not only grow and service our membership in Western Australia, but also in South Australia and the Northern Territory. This is a very exciting development for MESCA, and represents an objective we have been working towards for some time.

Also, since commodity prices have been in a state of turbulence with a bias to decline, we have seen a number of high-profile projects shelved and smaller projects postponed. Meanwhile, as proponents focus on increasing productivity while reducing their exposure to risk and operational expenditure to an absolute minimum, we see capital expenditure hovering while looking for the most attractive international address. So, the ‘normalisation’ period we mentioned last year looks set to continue for some time.

We delivered a total of five Briefings in Perth this calendar year, which ably support our development activities there, and continue to progress well. We have developed lasting partnerships with major project proponents and EPCMs in that region, and will continue to go beyond our members’ expectations by ensuring our members are well-promoted and winning work in this highly competitive environment. The MESCA brand is rapidly becoming known for our delivery of relevant and valuable services, and we will work to continue to enhance this reputation nationally.

MESCA was formed in 1998 as a joint initiative of the Queensland Government and the Ai Group (Australian Industry Group). While all government support has been long withdrawn, MESCA remains a division of the Ai Group, the largest and most respected industrial association in Australia. We provide sector-specific industry briefings, promotional opportunities and specialist information services to support members who focus their business development activities on providing innovative supply solutions to mining and energy projects. MESCA members also enjoy the backing of policy support and representation through Ai Group, benefiting from being part of a significant collective and national recognition as the voice of industry to all levels of government.

Particularly following the past three years of minority government, Australia is no longer the favoured destination of international capital, with tough competition from developing, emerging and established economies that have all worked assiduously to dramatically improve their foreign investment attraction strategies. So, Australian policymakers must respond swiftly and decisively to improve our address as a secure destination for investment. We see a significant opportunity for all state and territory governments to begin working more closely with their new federal counterparts in creating a harmonised regulatory approval centre for mining and energy projects. This is in a similar vein to a recent initiative surrounding the coordination of national Workplace Health and Safety reforms that have delivered some much-needed efficiency and benefit to all businesses. This will ensure mining and energy project proponents will not be burdened by differing regulatory and policy framework between the states, and are required to meet exactly the same environmental and regulatory obligations regardless of where their project is located. We believe this initiative would go a long way to restore and enhance Australia’s reputation as progressive, through exhibiting understanding and cooperation about the regulatory burdens that exist between different state governments. Encouragingly, we have received some very positive feedback from MESCA members about the green shoots of optimism returning to the sector after a very tough time for many, and while they may be harder to find than before, great business opportunities are still out there for the taking.

Deliverables and achievements Members have enjoyed the benefits of our tailored, sector-specific project updates and information services. This greatly assists our members to plan their business development activities, as the maturity and progress of major mining and energy projects often determine when our members have the best opportunity to seek interaction with project proponents.

4 • MESCA MEMBERS DIRECTORY VOL 8

Looking ahead Increasing an awareness and utilisation of our online services at mesca.com.au is among our key ambitions over the next 12 months. Our members have already seen some welcome changes to our website, which have dramatically improved functionality and aesthetic, but there are still improvements to come that are under construction. MESCA’s website had over 60,000 long-lingering visitors in the past 12 months, and these improvements will see this number increase again. So, it provides enormous satisfaction that members have recognised and seized this unique promotional opportunity by ensuring their business profiles and capability statements are current, complete and accurate within each member’s specific portal on MESCA’s website. Through this media, we can reach far more business prospects than we could ever hope to contact or assist individually, and this is one of the many benefits of MESCA membership.

In conclusion MESCA has worked tirelessly to consistently deliver relevance and value to our members. A key objective is to present MESCA membership NOT as a discretionary spend, but as an indispensable partner to our members. We will continue to encourage transparency from the mining and energy sector. The more transparent the mining and energy companies are about their projects, the better prepared MESCA members will be to fulfil their future needs. We will also continue to engage the mining and energy sector collectively, to discuss the challenges that confront us, and to promote the great technologies, talent and services that MESCA members have to offer. Brendan Rutherford Executive Officer, MESCA

MESCA SUPPLIERS Industry Buying Guide

MESCA Vision Statement The Mining & Energy Services Council of Australia (MESCA) is an industry body with a vision of creating a dynamic, competitive and unified Minerals and Energy sector in Australia.

GOAL

••

Provides regular project briefings, sector briefings and updates.

MESCA Member Services

MESCA is recognised as providing valuable services to its members and their customers by focusing on removing barriers and creating a partnership environment based on mutual respect and understanding. A key part of MESCA’s role is to facilitate the engagement and exchange of ideas and commentary between major industry players and our members. MESCA aims to assist both greenfield and brownfield projects in accessing the very best technology aimed at delivering ultimate project outcomes. Our members, capital equipment providers, service and project contractors, engineering and specialty services and MRO suppliers, are among the world’s best in providing innovation, ensuring projects are delivered and operated commercially, on-time, within a safe workplace and environmentally sound framework.

OBJECTIVES To work with the industry by assisting them with the following business objectives, which will see MESCA achieve its vision:

••

Better understand the needs of customers and suppliers;

••

To assist our members align their business, products and services to both current and future market demands;

••

Prepare and execute new business opportunities; and

••

Take advantage of emerging international markets.

DELIVERABLES MESCA conducts the following activities:

••

Collects and maintains detailed industry and market knowledge;

Raises and maintains the awareness of its members capabilities with likely customers, associated industry bodies, government and international stakeholders; and

Are you a distributor, manufacturer and/or service provider to the resource sector? ••

••

How do you keep up to date with all the projects and maintain data in a meaningful and accessible format for management and sales personnel? How do you tap into the thoughts and requirements of the industry? How do you access high level contacts within the resource sector? How do you leverage new and existing contacts within the sector? How do you maximise alliances and opportunities from other companies within the supply chain to the sector?

This is what MESCA provides, but is not limited to: •• ••

••

MESCA provides project updates for Australia and SE Asia. MESCA provides monthly bulletins on national and international industry related news items. MESCA conducts project briefings by resource companies (mining, mineral processing and energy) at regular intervals from Townsville to Perth with speakers ranging from project proponents to EPCMs. MESCA promotes member companies to the resource sector nationally and internationally.

MESCA facilitates dialogue between potential business partners within the supply chain.

••

Visit us at: www.mesca.com.au to find out more.

MESCA MEMBERS DIRECTORY VOL 8 • 5

MESCA SUPPLIERS Industry Buying Guide

MESCA MEMBERS CAPABILITY MATRIX

Adagold Aviation Pty Ltd

Aerison Pty Ltd

Aggreko

AHRENS Group Pty Ltd

Akron Brass Company

Alfabs Engineering Group Pty Ltd

Alminco Pty Ltd

Altra Industrial Motion

AMEC Australia Pty Ltd

Ampcontrol Pty Ltd

Andrew Engineering Pty Ltd

APB Modular

•

Atlas Copco Construction & Mining Australia

• • • • • • •

Atlas Steels

Ausenco Limited

Auslec

Austin Engineering Ltd

Austral Alloys

Australia-China Developments Centre

Australia Overnight Trucking Co

Australian Industrial Rental Pty Ltd

AWX

B&C Plastics

B & R Enclosures Pty Ltd

BANLAW

BASF Australia Ltd Bauer Field Mining & Engineering Australia Pty Ltd BDO (Qld) Pty Ltd

• • • • • • • • • • • • •

• • • •

Berg Engineering Pty Ltd

BGC Contracting Pty Ltd

Bid Write Pty Ltd

Blucher (Australia) Pty Ltd

BlueScope Steel Limited

Blundstone Australia Pty Ltd

• • • • • • •

• • • • • • • • • • • • • • • • • • • •

6 • MESCA MEMBERS DIRECTORY VOL 8

• • • • • • • • • • •

• • • • •

• • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • •

• • • • • • •

• • • • • • • • • • •

• • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

• • • • • • • • • • • • • • • • •

•

EXPORT CAPABLE

RECRUITMENT SPECIALISTS

PROFESSIONAL SERVICES, TRAINING ETC.

• • •

• •

• • • • • • •

• • • •

• • •

• •

• • •

• • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • •

• • •

SAFETY SYSTEMS & SERVICES

RESEARCH & DEVELOPMENT

SOFTWARE

RAIL SYSTEMS

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

TRANSPORT & LOGISTICS

POWER / ELECTRIC SOLUTIONS

FLUID SUPPLY & MANAGEMENT

ENVIRONMENT

FABRICATION, MAINTENANCE, REPAIR

WATER MANAGEMENT EQUIPMENT & SUPPLIES

• •

•

• • • • • • • • • •

MATERIALS HANDLING

• •

• • • • • • • • • • • • • • •

SITE INFRASTRUCTURE DEVELOPMENT & MANAGEMENT

• • • • • • • •

ENGINEERING, CONSTRUCTION AND DESIGN SERVICES

• • • • • • • •

ACUSAFE

CONTRACT MINING

OIL & GAS

• • • • • • • • • •

• • • • •

3M Australia Pty Ltd

ENGINEERING, PROCUREMENT, PROJECT MANAGEMENT

ENERGY

• • • • • • • • • • • • •

METALLIFEROUS (UNDERGROUND)

METALLIFEROUS (SURFACE)

• • • • •

MINERAL & COAL PROCESSING

• • • • • • • • • •

COAL MINING (UNDERGROUND)

Companies may supply only components or parts or services associated with their indicated sector capabilities and should be contacted directly for full details.

REFER PAGE

2. All information has been provided by the businesses listed.

COAL MINING (SURFACE)

1. This document is a reference tool and is not an advertisement or recommendation for any particular business by MESCA or Ai Group.

EQUIPMENT & MACHINERY

SECTOR CAPABILITY

MARKETS SERVED

MAINTENANCE REPAIR & OPERATION

Note:

• •

•

• • • • • •

• • •

• •

• • • •

• • • • • • • •

• • •

• •

•

• • • •

• •

• • • •

• • •

• •

MESCA SUPPLIERS Industry Buying Guide

MESCA MEMBERS CAPABILITY MATRIX

Bosch Rexroth Pty Ltd

Bramco Electronics

Brevini Australia Pty Ltd

Bullivants Pty Ltd

Bundaberg Walkers Engineering Ltd

Bureau Veritas Australia

Cadden Crowe

Calibre Global Pty Ltd

Caltex Australia

Carboline Coatings

Cattani Consulting

Cavotec Australia Pty Ltd

CBC Australia Pty Ltd

CBI Constructors Pty Ltd

CBO Telecommunications

CCG Cable Terminations Pty Ltd

Century Yuasa Batteries Pty Ltd

CH2M HILL

Chandler McLeod

Civil Mining & Construction Pty Ltd

CNW Electrical & Data Supplies

Coates Hire

Conductix-Wampfler

ConSep Pty Ltd

Cooper Fluid Systems

Corestaff Corporate Protection Australia Group Pty Ltd CSE Uniserve Pty Ltd

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • •

CSIRO Exploration & Mining

Custom Curtains & Linen

Custom Fluidpower Pty Ltd

Danfoss (Australia) Pty Ltd

David Brown Gear Industries

Davidson Recruitment

• • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • •

• • • •

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • •

EXPORT CAPABLE

RECRUITMENT SPECIALISTS

PROFESSIONAL SERVICES, TRAINING ETC.

SAFETY SYSTEMS & SERVICES

RESEARCH & DEVELOPMENT

• • • • • •

• • • • • • •

• •

• • • • • • • • • •

• • •

SOFTWARE

TRANSPORT & LOGISTICS

RAIL SYSTEMS

POWER / ELECTRIC SOLUTIONS

FLUID SUPPLY & MANAGEMENT

WATER MANAGEMENT EQUIPMENT & SUPPLIES

ENVIRONMENT

FABRICATION, MAINTENANCE, REPAIR

MATERIALS HANDLING

SITE INFRASTRUCTURE DEVELOPMENT & MANAGEMENT

ENGINEERING, CONSTRUCTION AND DESIGN SERVICES

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • •

CONTRACT MINING

ENGINEERING, PROCUREMENT, PROJECT MANAGEMENT

BOC Limited

• • • • • •

OIL & GAS

• • • • • • • • • • • • • • • • • • •

ENERGY

MINERAL & COAL PROCESSING

• • • • • • • • • • • • • • • • • • •

BMT-WBM Pty Ltd

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

METALLIFEROUS (UNDERGROUND)

• • • • • • • • • • • • • • • • • • •

METALLIFEROUS (SURFACE)

COAL MINING (UNDERGROUND)

Companies may supply only components or parts or services associated with their indicated sector capabilities and should be contacted directly for full details.

REFER PAGE

2. All information has been provided by the businesses listed.

COAL MINING (SURFACE)

1. This document is a reference tool and is not an advertisement or recommendation for any particular business by MESCA or Ai Group.

EQUIPMENT & MACHINERY

SECTOR CAPABILITY

MARKETS SERVED

MAINTENANCE REPAIR & OPERATION

Note:

•

• • • •

• •

•

• •

• • •

•

• •

•

• • • • • • • • • •

• • • • • • • •

• • • • • • • • • • •

•

• • • • •

• •

•

• • • •

•

• •

•

• • • •

•

• • • • • • • • • • • • • • • • • •

• •

• • • • • • •

• • • • • • • •

• • • • • •

MESCA MEMBERS DIRECTORY VOL 8 • 7

MESCA SUPPLIERS Industry Buying Guide

MESCA MEMBERS CAPABILITY MATRIX

• • • • • • • • • • • • • • • • • • • • • • • • •

Davies Wear Plate Systems

Decmil Australia Pty Ltd

Depth Logistics Pty Ltd

Diversified Mining Services Limited

Donaldson Australasia Pty Ltd

Downer Infrastructure

Downer Rail

Downes Group Pty Ltd

Downing Teal Pty Ltd

Draeger Safety Pacific Pty Ltd

DTE Group Pty Ltd

Dulux Protective Coatings

Durapower Industries

Duratray International Pty Ltd

East Coast Pipe Supplies

Endress+Hauser Australia

Entura

EPTEC Pty Ltd

Ergon Energy - Energy Solutions

ESCO Australia

ESS Engineering Services & Supplies Export Finance and Insurance Corporation Eye Lighting Australia

• • • • • • • • • • • • •

• • • • • • •

Fisher Adams Kelly

FK Gardner & Sons Pty Ltd

Flagstaff

Flexco Australia Pty Ltd

Flowserve Pump Division

FLSmidth Pty Ltd

Fulton Hogan Construction

Furmanite

G & S Engineering Services

Garlock Sealing Technologies

Gateway Hydraulics

Generate PR

Geofabrics Australasia Pty Ltd

• • • • • • • • • • • • • •

• • • • • • • • • • • •

• • • • • • • • • • •

• • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

8 • MESCA MEMBERS DIRECTORY VOL 8

• • • • • • • •

• •

• • •

• • • • • •

•

• •

•

• • •

EXPORT CAPABLE

RECRUITMENT SPECIALISTS

PROFESSIONAL SERVICES, TRAINING ETC.

SAFETY SYSTEMS & SERVICES

RESEARCH & DEVELOPMENT

SOFTWARE

RAIL SYSTEMS

TRANSPORT & LOGISTICS

•

• • • • • • • • • • • • • • • • • • • • • • • • • •

POWER / ELECTRIC SOLUTIONS

•

• • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

FLUID SUPPLY & MANAGEMENT

WATER MANAGEMENT EQUIPMENT & SUPPLIES

ENVIRONMENT

FABRICATION, MAINTENANCE, REPAIR

MATERIALS HANDLING

SITE INFRASTRUCTURE DEVELOPMENT & MANAGEMENT

ENGINEERING, CONSTRUCTION AND DESIGN SERVICES

CONTRACT MINING

ENGINEERING, PROCUREMENT, PROJECT MANAGEMENT

OIL & GAS

• • • • • • • • • •

ENERGY

METALLIFEROUS (UNDERGROUND)

• • • • • • • • • •

MINERAL & COAL PROCESSING

METALLIFEROUS (SURFACE)

• • • • • • • • • • • • • • • •

COAL MINING (UNDERGROUND)

Companies may supply only components or parts or services associated with their indicated sector capabilities and should be contacted directly for full details.

REFER PAGE

2. All information has been provided by the businesses listed.

COAL MINING (SURFACE)

1. This document is a reference tool and is not an advertisement or recommendation for any particular business by MESCA or Ai Group.

EQUIPMENT & MACHINERY

SECTOR CAPABILITY

MARKETS SERVED

MAINTENANCE REPAIR & OPERATION

Note:

•

• •

• • •

• •

• • • • • • • • • • • • • • •

• •

•

• •

• • •

• •

•

• •

• • • •

• • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • •

• •

• • • •

•

• • • •

•

MESCA SUPPLIERS Industry Buying Guide

MESCA MEMBERS CAPABILITY MATRIX

Howden Australia

ifm efector Pty Ltd

IFS

IFS Australia Pty Ltd

Ingal EPS

Insight Business

Insurance House Group

Integra Packaging Qld Pty Ltd

Integrated Pumping Solutions

Intercon Engineering Pty Ltd

International Paint

Iwaki Pumps Australia Pty Ltd

J J Richards & Sons

• • • • • • • • • • • • • •

Jacobs E&C Australia Pty Ltd

Jennmar Australia

John Holland Pty Ltd

Jord International Pty Ltd

Jotun Australia Pty Ltd

Joy Global (AUS) Pty Ltd

Kador Engineering (Aust) Pty Ltd

KAESER Compressors Australia Pty Ltd

Kempe

Kentz Pty Ltd

Kerman Contracting Pty Ltd

• • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • •

• • •

•

• • •

• • • •

• •

• • •

• • • • • • • • • • • • • • • • •

•

REFER PAGE

EXPORT CAPABLE

HMG Hardchrome

RECRUITMENT SPECIALISTS

• • • •

PROFESSIONAL SERVICES, TRAINING ETC.

SAFETY SYSTEMS & SERVICES

Hitachi Construction Machinery (Australia) Pty Ltd

RESEARCH & DEVELOPMENT

SOFTWARE

Hillier Engineering Services

TRANSPORT & LOGISTICS

HES Winches Australia Pty Ltd

RAIL SYSTEMS

Hawker Siddeley Switchgear

POWER / ELECTRIC SOLUTIONS

FLUID SUPPLY & MANAGEMENT

Hastings Deering (Australia) Ltd

WATER MANAGEMENT EQUIPMENT & SUPPLIES

ENVIRONMENT

Hard Metal Industries Pty Ltd

FABRICATION, MAINTENANCE, REPAIR

MATERIALS HANDLING

Halley & Mellowes Pty Ltd

• • • • • • • • • •

SITE INFRASTRUCTURE DEVELOPMENT & MANAGEMENT

• • • • • • • • • •

ENGINEERING, CONSTRUCTION AND DESIGN SERVICES

Golding Contractors Pty Ltd

• • • • • • • • • •

CONTRACT MINING

Global Manufacturing Group

• • • • • • • • • •

ENGINEERING, PROCUREMENT, PROJECT MANAGEMENT

METALLIFEROUS (UNDERGROUND)

OIL & GAS

METALLIFEROUS (SURFACE)

Global Cranes

Companies may supply only components or parts or services associated with their indicated sector capabilities and should be contacted directly for full details.

ENERGY

COAL MINING (UNDERGROUND)

Georg Fischer Pty Ltd

2. All information has been provided by the businesses listed.

MINERAL & COAL PROCESSING

COAL MINING (SURFACE)

1. This document is a reference tool and is not an advertisement or recommendation for any particular business by MESCA or Ai Group.

EQUIPMENT & MACHINERY

SECTOR CAPABILITY

MARKETS SERVED

MAINTENANCE REPAIR & OPERATION

Note:

•

• • • • • • • • • • • • • •

•

• •

• • • • •

•

• •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

•

MESCA MEMBERS DIRECTORY VOL 8 • 9

MESCA SUPPLIERS Industry Buying Guide

MESCA MEMBERS CAPABILITY MATRIX

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • •

• •

• • •

Komatsu Australia Pty Ltd

Kook Multimedia

KSB Australia Pty Ltd

L. C. Loynes & Associates

Laing O'Rourke Pty Limited

Larpro Pty Ltd

Laser Central

LCR Group Pty Ltd

Lend Lease i.Power Solutions Pty Ltd

LogiCamms Limited

Logiworx

Magnetic Automation Pty Ltd

Magnum Australia

MATO Australia McConnell Dowell Corporation Limited McKajj Services

• • • • •

• • • • • • • •

• • • • • •

• • • • •

• • • •

• • • • • • • •

• • • • • • •

McLanahan Corporation

Mechanical Engineers Australia

MMD Australia Pty Ltd

100

MM Electrical

100

Monadelphous Group Limited

101

Mono Pumps

101

Morris Corporation

102

Moultrie Group

102

MRC Piping Systems Australia

102

MTU Detroit Diesel

104

• • • • • • • • • •

Multiskilled Resources (Australia) Pty Ltd

104

• • • • • • • •

Nalco Australia

105

NationWide Hire

106

Navman Wireless Australia

106

NEPEAN Mining

107

Newcastle Industrial Plastics

107

• • • • •

• • • • • • • • • • • • • • •

10 • MESCA MEMBERS DIRECTORY VOL 8

• • • • • • • • • • • • • • •

• • •

• • • • • • • • • • • • • •

EXPORT CAPABLE

RECRUITMENT SPECIALISTS

PROFESSIONAL SERVICES, TRAINING ETC.

SAFETY SYSTEMS & SERVICES

RESEARCH & DEVELOPMENT

RAIL SYSTEMS

TRANSPORT & LOGISTICS

POWER / ELECTRIC SOLUTIONS

SOFTWARE

• •

• • •

• • • • • • • • • • • • •

• • •

• •

• • • • • • • • • • •

• • • • • • • • • •

• • • •

• • •

• • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • •

• • • • • • • • • • • • • • • • • • • •

McKenna Hampton Insurance Brokers Pty Ltd

• • • • • • • • • •

FLUID SUPPLY & MANAGEMENT

• • • •

Kinetic Australia Pty Ltd

• • • • •

WATER MANAGEMENT EQUIPMENT & SUPPLIES

• • • •

Kinder & Co Pty Ltd

• • • • •

ENVIRONMENT

FABRICATION, MAINTENANCE, REPAIR

MATERIALS HANDLING

SITE INFRASTRUCTURE DEVELOPMENT & MANAGEMENT

ENGINEERING, CONSTRUCTION AND DESIGN SERVICES

CONTRACT MINING

ENGINEERING, PROCUREMENT, PROJECT MANAGEMENT

OIL & GAS

ENERGY

MINERAL & COAL PROCESSING

METALLIFEROUS (UNDERGROUND)

METALLIFEROUS (SURFACE)

COAL MINING (UNDERGROUND)

Companies may supply only components or parts or services associated with their indicated sector capabilities and should be contacted directly for full details.

REFER PAGE

2. All information has been provided by the businesses listed.

COAL MINING (SURFACE)

1. This document is a reference tool and is not an advertisement or recommendation for any particular business by MESCA or Ai Group.

EQUIPMENT & MACHINERY

SECTOR CAPABILITY

MARKETS SERVED

MAINTENANCE REPAIR & OPERATION

Note:

• •

•

• • •

•

• • •

• • • • • • • • • • • • • •

• • •

• • • • • • • • • • • • • •

• • • • •

•

• • • •

•

• •

• • • •

• •

• • • •

•

• • •

• •

•

MESCA SUPPLIERS Industry Buying Guide

MESCA MEMBERS CAPABILITY MATRIX

Nexans Olex Australia

108

Nexium Telecommunications

108

• • • • • • • • • • • • •

NHP Electrical Engineering Products Pty Ltd

109

• • • • • • • • • •

nkt Cables Australia Pty Ltd

109

NLT Australia Pty Ltd Norcoast Refrigeration Company Pty Ltd Norman Disney & Young

110

• • • • • • • • • • • • • •

112

• •

113

Northline Pty Ltd

114

Novecom Pty Ltd

114

One Key Resources Pty Ltd

114

OneSteel

115

OnTalent Pty Ltd

115

Orontide Group Ltd

116

Ostwald Bros Civil Pty Ltd

117

• • • • • • • •

Pan Process Pty Ltd

117

Parsons Brinckerhoff

117

Pentair Valves & Controls

117

Phoenix Contact Pty Ltd

118

Piling Contractors Pty Ltd

118

Power Step (Aust) Pty Ltd

119

Present Group

120

• • • • • • • • • • • • • • •

• • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Pressurelube International Pty Ltd

120

Prime Rentals

121

Pronto Software

122

Protech Working Recruitment

122

Pybar Mining Services Pty Ltd

123

QMW Industries Pty Ltd

123

• • • • •

• • • • • • • • • • • • • • • •

Quarry Mining & Construction Equipment Pty Ltd

123

• •

R & D Technology Pty Ltd

124

RCR O'Donnell Griffin

124

RCR Tomlinson

125

Realtime Group

126

Redispan Conveyors Pty Ltd

126

Reed Exhibitions Australia

127

Rexel Electrical Supplies

127

• • • • • • •

• • • •

EXPORT CAPABLE

RECRUITMENT SPECIALISTS

PROFESSIONAL SERVICES, TRAINING ETC.

SAFETY SYSTEMS & SERVICES

RESEARCH & DEVELOPMENT

SOFTWARE

TRANSPORT & LOGISTICS

RAIL SYSTEMS

POWER / ELECTRIC SOLUTIONS

FLUID SUPPLY & MANAGEMENT

WATER MANAGEMENT EQUIPMENT & SUPPLIES

FABRICATION, MAINTENANCE, REPAIR

ENVIRONMENT

• •

•

• • •

• •

•

• • •

• • • • • •

•

• • • • • •

• •

• • •

• •

• • • • • •

•

• •

• • • • •

• • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • •

•

• •

• • • • • • • •

MATERIALS HANDLING

• •

• • • • • • • • • • • • • • • • •

SITE INFRASTRUCTURE DEVELOPMENT & MANAGEMENT

ENGINEERING, CONSTRUCTION AND DESIGN SERVICES

CONTRACT MINING

ENGINEERING, PROCUREMENT, PROJECT MANAGEMENT

OIL & GAS

ENERGY

MINERAL & COAL PROCESSING

METALLIFEROUS (UNDERGROUND)

METALLIFEROUS (SURFACE)

COAL MINING (UNDERGROUND)

Companies may supply only components or parts or services associated with their indicated sector capabilities and should be contacted directly for full details.

REFER PAGE

2. All information has been provided by the businesses listed.

COAL MINING (SURFACE)

1. This document is a reference tool and is not an advertisement or recommendation for any particular business by MESCA or Ai Group.

EQUIPMENT & MACHINERY

SECTOR CAPABILITY

MARKETS SERVED

MAINTENANCE REPAIR & OPERATION

Note:

• • • • • •

• •

• • • •

•

• •

•

• •

•

• •

•

• •

•

• • • • • • • • • • • • • •

• • • • • • • • • • • • •

•

• • • • • • • • • •

• • • • •

MESCA MEMBERS DIRECTORY VOL 8 • 11

MESCA SUPPLIERS Industry Buying Guide

MESCA MEMBERS CAPABILITY MATRIX

Schenker Australia Pty Ltd

136

Schneider Electric (Australia) Pty Ltd

136

Sedgman Limited

136

SEMF Pty Ltd

137

SEW-Eurodrive

138

SG Partners

138

SGS Australia Pty Ltd

140

Siemens Ltd

140

Sika Australia Pty Ltd

140

Silcar

141

Skyreach Pty Ltd

141

• • • • • • • •

SLADE Industries Pty Ltd

141

SNC-Lavalin Australia Pty Ltd

142

Sound Control Pty Ltd

142

• • • • • • • •

Southern Cross Electrical Engineering Limited

142

• • • • • • • •

Southern Cross Engineering

142

Southern Queensland Steel

143

Steinert Australia Pty Ltd

143

Stellar Recruitment

144

Sullair Australia Pty Ltd

144

Sumitomo Drive Technologies

145

Svendborg Brakes A/S

145

• • • • • • •

SAM Technology Engineers Pty Ltd

131

Samson Controls Pty Ltd

• • • • • • •

• • • • • • • • • • • • • •

• • • • • • • • • • • • •

• • • • • • • • • • • • • • • • •

12 • MESCA MEMBERS DIRECTORY VOL 8

• •

• • • • • • • •

• •

• • •

• • • •

•

• •

•

• • • • • • • • • • • • • • • • • • • •

•

• • • • • • • • • • • • • • • • • •

• • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • •

EXPORT CAPABLE

135

• • • • •

130

RECRUITMENT SPECIALISTS

Scania Australia Pty Ltd

• • • • •

Ruswin Integrated Security Systems

PROFESSIONAL SERVICES, TRAINING ETC.

134

RPS Australia East Pty Ltd

130

SAFETY SYSTEMS & SERVICES

132

Scalable Data Systems

129

•

RESEARCH & DEVELOPMENT

Sargent

Rocla Pipeline Products

SOFTWARE

• •

129

RAIL SYSTEMS

• • • •

Rittal Pty Ltd

TRANSPORT & LOGISTICS

• • • • • •

129

EQUIPMENT & MACHINERY

132

Ringway Materials Handling

ENVIRONMENT

Sandvik Mining & Construction Australia Pty Ltd

128

MATERIALS HANDLING

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Rezitech Services Pty Ltd

CONTRACT MINING

• • • • • • • •

128

POWER / ELECTRIC SOLUTIONS

WATER MANAGEMENT EQUIPMENT & SUPPLIES

FABRICATION, MAINTENANCE, REPAIR

SITE INFRASTRUCTURE DEVELOPMENT & MANAGEMENT

ENGINEERING, CONSTRUCTION AND DESIGN SERVICES

ENGINEERING, PROCUREMENT, PROJECT MANAGEMENT

• • • • • • • • •

Reynolds Soil Technologies Pty Ltd

OIL & GAS

ENERGY

• • • • • • • • •

• • • • • • • • • • •

131

• • • • • • • • •

Companies may supply only components or parts or services associated with their indicated sector capabilities and should be contacted directly for full details.

REFER PAGE

MINERAL & COAL PROCESSING

METALLIFEROUS (UNDERGROUND)

• • • • • • • •

COAL MINING (UNDERGROUND)

• • • • • • • •

COAL MINING (SURFACE)

2. All information has been provided by the businesses listed.

METALLIFEROUS (SURFACE)

1. This document is a reference tool and is not an advertisement or recommendation for any particular business by MESCA or Ai Group.

FLUID SUPPLY & MANAGEMENT

SECTOR CAPABILITY

MARKETS SERVED

MAINTENANCE REPAIR & OPERATION

Note:

•

• • • • • • •

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

•

• • • • • •

• •

• • • •

•

• • • • •

•

• •

• • • •

•

• • •

• •

MESCA SUPPLIERS Industry Buying Guide

MESCA MEMBERS CAPABILITY MATRIX

152

Ultraspin Technology

153

United Fasteners

153

Vantaz Group Australia Pty Ltd

154

Vermeer Sales & Service

154

Veyance Belting Pty Ltd

154

Victaulic

155

Voith Turbo Pty Ltd

155

Wagners

156

REFER PAGE

Walz Construction Company Pty Ltd 156 WDT (Engineers) Pty Ltd

156

Webforge Queensland

156

WEG Australia Pty Ltd

157

Weir Minerals Ltd

157

Whittens

158

Windsor Business Solutions

158

WorkPac

158

Wormald

159

• • •

• • • •

•

• • • • • • • • • • • • • • • • •

• • • • • • • • • • • •

• •

• • • • • • • • • • • • • •

• • • • • •

•

• •

EXPORT CAPABLE

UHY Haines Norton

RECRUITMENT SPECIALISTS

152

PROFESSIONAL SERVICES, TRAINING ETC.

Tsubaki Australia Pty Ltd

• • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

SAFETY SYSTEMS & SERVICES

151

• •

RESEARCH & DEVELOPMENT

Transfield Services Limited

• • • • • •

SOFTWARE

•

151

TRANSPORT & LOGISTICS

150

RAIL SYSTEMS

148

• • • • • • • • • • • • • • • • • • • • •

POWER / ELECTRIC SOLUTIONS

Thomas & Coffey Limited Townsville Engineering Industries Pty Ltd TR7 Pty Ltd

• • • • • •

FLUID SUPPLY & MANAGEMENT

148

• • • • • •

WATER MANAGEMENT EQUIPMENT & SUPPLIES

147

Thomas & Betts

• • • • • •

ENVIRONMENT

Thiess Construction Pty Ltd

• • • • • •

FABRICATION, MAINTENANCE, REPAIR

146

• • • • • •

MATERIALS HANDLING

ENERGY

Tex Onsite Pty Ltd

• • • • • •

SITE INFRASTRUCTURE DEVELOPMENT & MANAGEMENT

MINERAL & COAL PROCESSING

146

ENGINEERING, CONSTRUCTION AND DESIGN SERVICES

METALLIFEROUS (UNDERGROUND)

Terex Jaques

CONTRACT MINING

METALLIFEROUS (SURFACE)

146

Companies may supply only components or parts or services associated with their indicated sector capabilities and should be contacted directly for full details.

ENGINEERING, PROCUREMENT, PROJECT MANAGEMENT

COAL MINING (UNDERGROUND)

Technofast Industries Pty Ltd

2. All information has been provided by the businesses listed.

OIL & GAS

COAL MINING (SURFACE)

1. This document is a reference tool and is not an advertisement or recommendation for any particular business by MESCA or Ai Group.

EQUIPMENT & MACHINERY

SECTOR CAPABILITY

MARKETS SERVED

MAINTENANCE REPAIR & OPERATION

Note:

• • • • • • • •

•

• • •

• • • •

•

• •

• • • • • • •

• •

•

• •

•

• •

MESCA MEMBERS DIRECTORY VOL 8 • 13

volume 8

MESCA SUPPLIERS Industry Buying Guide

2014

MESCA SUPPLIERS Industry Buying Guide

3M Australia Pty Ltd About: 3M is fundamentally a science-based company. We produce thousands of imaginative products, and we’re a leader in scores of markets – from health care and highway safety, to office products and abrasives and adhesives. Our success begins with our ability to apply our technologies – often in combination – to an endless array of real-world customer needs. Of course, all of this is made possible by the people of 3M and their singular commitment to make life easier and better for people around the world.

high and low-voltage, plant control systems, low-voltage switchgear, motors, medium-voltage switchgear, motor control centres, distribution transformers, Power Factor Correction, harmonic filters, variable speed drives.

Website:

www.abb.com/au Offices: QLD

Activity: 3M Australia has a longstanding relationship in the Mining Industry manufacturing innovative products, which are used on mine sites 365 days a year. At 3M our goal is to provide solutions that can help increase productivity and ensure worker safety.

Products: Respiratory, Hearing, Eye and Welding Protection Spill Management Detection and Monitoring Equipment Worker Visibility

Address:

Phone:

36 Archerfield Road, DARRA, QLD 4076

1800 222 435

Acusafe Offices: QLD

Traffic Safety for vehicles and site signage Safety Audits Safety Matting

Address:

Fire Barrier Protection Mist and Dust Control Electrical Solutions including tapes, jointing kits, heat shrink and cold shrink technologies Abrasive and Adhesive products for MRO Tapes and Packaging products Anti-Corrosion Coatings Water Filtration PPE Vending Solutions.

56 Business Street, 07 3382 9525 07 3807 8383 BEENLEIGH, QLD 4207

Website:

www.3m.com.au

Phone:

Fax:

Adagold Aviation Pty Ltd About:

Offices: NSW Address:

Phone:

Building A, 1 Rivett Road, NORTH RYDE, NSW 2113

136 136

ABB Australia About: ABB is a leader in power and automation technologies that enable utility and industry customers to improve performance while lowering environmental impact. POWER TECHNOLOGIES The Power Technologies division serves industrial and commercial customers, as well as electric, gas and water utilities, with a broad range of products, services and solutions for power transmission and distribution. The portfolio includes transformers, switchgear, breakers, capacitors and cables, as well as high- and medium-voltage applications, many of which are also sold through external channel patners like distributors, system integrators, contractors and original equipment manufacturers. AUTOMATION TECHNOLOGIES The Automation Technologies division serves the automotive, building, chemicals, consumer, electronics, life sciences, manufacturing, marine, metals, minerals, paper, petroleum, transportation, turbocharging and utility industries. Key technologies include control, drives, enterprise software, instrumentation, low-voltage products, motors, robots and turbochargers. These offerings are supported by field maintenance and asset management services, and are sold both directly and through channel partners.

Activity: ABB has a proven record in designing and delivering complete power and automation solutions tailored to meet our mining customers’ needs.

Products: Sag and ball mill drives, mine hoisting systems, power reticulation in

16 • MESCA MEMBERS DIRECTORY VOL 8

ADAGOLD Aviation Pty Ltd is a uniquely independent, Australian-based Aircraft Charter and Management Service company providing total packaged solutions for passenger, air-freight and cargo requirements. Founded in 1992, ADAGOLD has built an extensive base of clients spanning Foreign Governments, Federal Government, United Nations and private enterprise. Specialising in the industry sectors of Mining, Resources and Defence, ADAGOLD provides tailored solutions that are flexible and cost-effective across the life of a project, or for a single flight operation. Drawing on strong aircraft operator relationships throughout Australia, Asia Pacific and worldwide, ADAGOLD has pioneered and remains the market leader in the Australian Aircraft Charter industry. According to the needs of the client and project circumstances, ADAGOLD selects the most suitable aircraft, with the appropriate specifications and relevant cost. ADAGOLD arranges all aspects of the charter, including ground transport, security, flight clearances, catering, loading and unloading to name but a few. ADAGOLD has evolved into Australia’s largest and most successful Aircraft Charter Solutions Company, being ranked by the Australian Defence Magazine as the No. 1 wholly Australian-owned SME supplier to the Defence Industry in 2011. This ranking was lifted from No. 3 the previous year following the awarding of a major contract by the ADF to provide weekly services between Australia and the Middle East utilising a leased Airbus A340.

Activity: Air Charter Management and Operations, including: •

FIFO Contract Management and Procurement (Fly-In-Fly-Out)

•

Adhoc Air Charter and Investor Tours to remote locations

•

Air Cargo Operations; Heavy and Outsize movements of Air Cargo to remote locations across Australia and Internationally.

Products: Commercial Passenger Aircraft, including Regional Turbo Prop Aircraft and Commercial Jet Aircraft suitable for adhoc and contract air charter operations. Private/Executive Aircraft suitable for Investor and Management site visits.

MESCA SUPPLIERS Industry Buying Guide

Dedicated Cargo Aircraft up to 120 tonnes capacity for movements of heavy and urgent breakdown equipment and spare parts.

Other Countries:

Products: A large range of air pollution control equipment, including bag houses, scrubbers, RTOs and innovative conveyor belt lifter products.

Denmark; United Arab Emirates; Asia Pacific; PNG.

Equipment:

Specialisation:

‘Concept to Commissioning’ engineered turnkey solutions to air and noise pollution.

FIFO, Cargo, Air Charter, Ground Handling.

New Products:

Website:

www.adagold.com.au

Regenerative Thermal Oxidation equipment for the removal and destruction of odours, VOCs and gases.

Offices: Corporate Office – NSW

Other Countries:

Address:

Phone:

Fax:

Suite 6.05, 247 Coward Street, MASCOT, NSW 2020

02 9667 4245 02 9667 4279

Aerison Pty Ltd About: Aerison is a privately owned business employing approximately 125 people and operates in every state in Australia.

Activity: We provide custom-built engineered solutions for industry, including air pollution control, acoustic treatment, Ventilation Air Methane solutions and innovative conveyor belt lifter products.

We have worked in many off-shore companies and have sister companies in South Korea and India along with facilities and partners in Europe, USA and throughout Asia.

Specialisation: Dust and fume control systems, noise pollution control, fabrication and national on-site asset service and maintenance.

Website:

www.aerison.com Offices: WA Address:

Phone:

17 Ballantyne Road, KEWDALE, WA 6105

08 9352 5900 08 9352 5566

Fax:

Mining Advert AU – 177 x 125mm + 3mm Bleed, CMYK

No Matter What Your Mining Challenge, We Power Through It No matter where your mine is located, you can rely on Aggreko to provide reliable power and temperature control solutions, quickly and affordably. With over 50 years’ experience and the world’s largest rental fleet, we provide turn-key services that grow with your mine throughout its entire life-cycle. Whether you need a 15 kVA generator to power a camp, or a 20 MW power package to run an entire mining facility or additional cooling and ventilation capacity, we will work with you to deliver tailored solutions that match your requirements, wherever and whenever they are needed.

Aggreko, Power Specialists in Mining Aggreko Australia-Pacific T: 1800 808 109 Aggreko operates from over 190 locations throughout the world. For all global locations, please go to: www.aggreko.com/contact

MESCA MEMBERS DIRECTORY VOL 8 • 17

MESCA SUPPLIERS Industry Buying Guide

Aggreko

Products:

About: Aggreko provides rental power, temperature control and compressed air systems to companies around the world. We help our customers increase profits by creating opportunities, solving problems and reducing risk using our unique network of global locations.

Workshops, Warehouses, Mining Camps, Commodity Storage Buildings, Refurbishments, Mining Infrastructure, Conveyors, Train/Ship Loading and Unloading Systems, Structural Steel/Platework, Steel Walkways.

New Products: Machining, Mechanical Services.

Specialisation:

Activity: Inspiring confidence worldwide with specialist energy solutions. Aggreko provides rental power, temperature control and compressed air systems to companies around the world. We help companies increase profits by creating opportunities, solving problems.

Design and Construct, Mining Services and Infrastructure, Materials Handling, Structural Steel Fabrication, Precision Engineering, Machining, Mechanical Services.

Website:

www.ahrens.com.au

Products: Diesel Powered Silenced Generators and Power Stations, Transformers, Switch Rooms, Loadbanks, Fuel Tanks, Air Handlers, Cooling Towers, Industrial Air Conditioners and Fluid Chillers, Heaters and Heat Exchangers, Dehumidifiers, Dryers and After Coolers.

Offices: SA

New Products: 10MW Cooling Towers; 1MW Gas Generators.

Website:

Address:

Phone:

Wilhelm Road, KINGSFORD, SA 5118

08 8521 0000 08 8521 0099

Fax:

www.aggreko.com

Akron Brass Company

Offices: VIC

Activity:

Address:

Phone:

Fax:

101 Woodland Drive, BRAESIDE, VIC 3195

03 9586 5030

07 9586 5051

Akron Brass Company is a world-leading manufacturer and supplier of Manual or Remote Controlled Water Cannons and Fire Fighting Nozzles. With over 90 years of experience, Akron Brass systems are... Tested...Proven... Trusted. Our systems are designed to operate effectively and reliably in normal everyday mining conditions 24/7. Our products are currently used by many large mining companies both here in Australia and internationally. Akron Brass Company water cannons are used on:

Email: gwhyte@aggreko.com.au

AHRENS Group Pty Ltd About: Ahrens delivers intelligent and cost-effective solutions in Design and Construct, Mining Services and Infrastructure and Materials Handling projects, including workshops and large storage facilities to complex conveying systems, stockpile covers and switchrooms. Ahrens specialises in remote area construction, with offices and steel fabrication facilities strategically located north of Adelaide, Olympic Dam, Perth, Newman, Darwin, Brisbane and Toowoomba. We have worked everywhere from Mt Isa and Darwin in the north, to Kalgoorlie and Olympic Dam in the south, and we service our projects with an experienced team of engineers, project managers and sub-contractors. Our collaborative approach combines the skills and knowledge of our in-house team of engineers and designers with specialist in-house trades as well as subcontractors. Our fully integrated Design and Construct capabilities and our state-ofthe-art steel fabrication plant give us a real competitive advantage and the flexibility to deliver either full design and construct or key elements of a more intricate project. Certification in safety, quality and environment, and a commitment to engaging with local communities and providing equal employment opportunities make us an ideal partner for Australian mining companies with a similar ethos.

Activity: Design and Construct, Mining Services and Infrastructure, Materials Handling, Structural Steel Fabrication, Precision Engineering.

18 • MESCA MEMBERS DIRECTORY VOL 8

•

Watercarts for dust suppression /fire fighting

•

Heavy Vehicle Washdown facilities for cleaning machines

•

Processing and Washing facilities for moving waste products to sumps or Fire Fighting

•

Emergency Response Vehicles / Fire Trucks for fire fighting.

With a reputation for manufacturing industry-leading products, our team will deliver a solution to meet your exact requirements.

Equipment: •

Water Cannons for Watercarts

•

Manual, Remote Controlled or PLC Controlled Water Cannons for Washdown Facilities

•

Processing Facilities

•

Fire Nozzles, Monitors, Hose Reels, LED Lights and V-Mux for Emergency Response Vehicles.

Other Countries: Exports to most countries.

Specialisation: Cleaning Machines Fire Fighting Dust Suppression.

Website:

www.akronbrass.com

MESCA SUPPLIERS Industry Buying Guide

Offices: NSW Address:

Fax:

Mobile:

72 Ferndell Street, 02 4972 0889 02 4972 0889 0409 720 790 CHESTER HILL, NSW 2162

Alminco Pty Ltd About: For over three decades, Alminco has been designing and manufacturing innovative, reliable and durable underground mining equipment solutions for Australian and overseas Coal Fields.

Email: nforan@akronbrass.com

The Alminco team comprises local members of your community who share your pride in our industry and belief in keeping Australian mining and manufacturing strong.

Alfabs Engineering Group Pty Ltd

Alminco Service Centres are geographically located close to customer mine sites in New South Wales and Queensland. The Service Centres are complemented by Alminco Mobile Technicians and On-Customer-Site facilities.

About: Located in Kurri Kurri in the Hunter Valley, Alfabs has been in business over thirty years and remains a family-owned company. Alfabs has over sixty employees servicing a large group of multinational customers Australiawide.

Activity: Alfabs Engineering is a well-established heavy engineering company with a vast array of experience in coal and materials handling fabrication work. Alfabs also has a mining services division, refer website for capabilities.

Equipment: Please refer to website.

Specialisation: All coal handling and materials handling projects from conveyors, chutework, load out bins, gantries, screens sizers crushers etc.

The Alminco Portfolio has grown from legendary brands, such as The Gopher Bolter and Cub Windy Borers, to also include the T-Rex roof Support, Scorpion Crawler Rig, Electro-Scorpion Crawler Rig and the award-winning Spyder Series bolters. Alminco also manufactures a range of Enhanced Quickdusters, Taipan Grout Pumps and Mixers and Fabricated QDS attachments, such as Manbaskets and bolter platforms. This year we have also added to two agency product families to cover IngersollRand Air Tools and the sandpiper pump solutions. Our deep industry knowledge and experience is supported by a strong professional design and service team offering a full range of support programs, such as Equipment Life-Cycle Management and DesignFabrication to order. We have always had a strong commitment to Research and Development and this continues to grow. For example, we are working on a very exciting project, in partnership with Minova, the Self Drilling Resin Bolt Technology. The project has the backing of the Coal Industry’s Research Body, ACARP. At Alminco, we are continually working to provide you with better solutions.

Website:

Activity:

www.alfabs.com.au

Mining solutions and technologies, service and hire for underground coal mining equipment.

Offices: NSW Address:

Phone:

Fax:

130 Mitchell Avenue, KURRI KURRI, NSW 2327

02 4937 5079 02 4937 4093

Products: Crawler Drill Rigs Alminco Scorpion Air/Hydraulic and Electro/Hydraulic Alminco Thor Hand Bolters Gopher, Gopher Fatboy Cub Borer

Allplates

Bull Ant Award-winning Spyder Bolter, Longwall and Standard

Offices: QLD

Pumps and Hand Tools

Address:

Phone:

Fax:

64 Harper Street, MOLENDINAR, QLD 4214

07 5597 1188 07 5597 2188

Taipan Grout Pump and Mixer Agents for Sandpiper Pumps Agents for Ingersoll Rand Agents for Chemgrout QDS Attachments T-REX temporary roof support system Duck Bills Lockers Man Baskets Bolter Baskets Jibs Cable Reelers 1.5T and 4.0T Enhanced Quickdusters Bulk Grout Station General Engineering Trailers

MESCA MEMBERS DIRECTORY VOL 8 • 19

MESCA SUPPLIERS Industry Buying Guide

Activity:

Engineering Design General Fabrication

Manufacture and supply of:

Support Programs

•

Brakes

Training Programs

•

Clutches

Service Program

•

Driveshafts and Couplings

Hire

•

Holdbacks

Life cycle Solutions.

•

Sheaves

New Products:

•

Specialised Drivetrain components for heavy industries.

SDRB, Self Drilling Rock Bolt in conjunction with MINOVA

Products:

Alminco Bulk Grout Station

•

Wichita Clutches and Brakes

Alminco High Torque.

•

Twiflex Caliper Brakes

Equipment:

•

Ameridrive Gear couplings and Driveshafts.

Alminco offers a comprehensive hire and service program on the majority of our equipment.

•

Bibby Couplings and backstops

•

Marland holdbacks

•

Formsprag Overrunning Clutches and holdbacks

•

Stieber Overrunning Clutches

•

Industrial Clutch Company clutches and Brakes.

Other Countries: South Africa Sub Sahara, Represented by Fabchem United States of America, Represented by Royal Hydraulics New Zealand, Represented by CITUMI

New Products:

UK, Represented by MINOVA International.

TB Woods, Driveshafts and Couplings Bauer Transmisions

Website:

Stieber Releasable Backstops.

www.alminco.com.au

Equipment:

Offices: NSW

Brake Systems

Address:

Phone:

Fax:

503-505 Princes Highway, FAIRY MEADOW, NSW 2519

1300 ALMINCO

02 4284 7783

Conveyor holdbacks Drive shafts Drive couplings Mill clutches Torque Limiters Caliper Brakes

Altra Industrial Motion

Gear and Grid couplings.

About:

Global.

Other Countries:

Altra is a leading multinational designer, producer and marketer of a wide range of mechanical power transmission products.

Specialisation:

We sell our products in over 70 countries throughout the world.

Specialised drive components and Braking solutions for Mining conveyors, Crushers, Mills, Winches, Draglines, Shovels, and associated equipment.

Our products are frequently used in critical applications, such as brakes for conveyors, Draglines and Mining Shovels. Altra also provides products for use in a wide variety of high-volume manufacturing processes, where the reliability and accuracy of our products are critical in both avoiding costly downtime and enhancing the overall efficiency of manufacturing operations. Our products are marketed under a variety of well-recognised and established manufacturing brand names. These leading brands are Ameridrives, Ameridrives Power Transmission, Boston Gear, Warner Electric, Formsprag Clutch, TB Wood’s Incorporated, Industrial Clutch, Kilian Manufacturing, Marland Clutch, Nuttall Gear, Stieber Clutch, Twiflex Ltd, Huco Dynatork, Bibby Transmissions, Matrix International, Inertia Dynamics, Delroyd Worm Gear, Warner Linear and Wichita Clutch. The Altra product portfolio includes industrial clutches and brakes, enclosed gear drives, open gearing, couplings, machined-race bearings, variable frequency and belted drives, linear actuators and other related products. Our customers operate in a diverse group of industries, including automotive, general industrial, material handling, aggregate and mining, marine, power generation, oil and gas, transportation and turf and garden.

20 • MESCA MEMBERS DIRECTORY VOL 8

Website:

www.altramotion.com Offices: NSW Address:

Phone:

Unit 51, 9 Hoyle Avenue, CASTLE HILL, NSW 2154

02 9894 0133 02 9894 0368

Fax:

MESCA SUPPLIERS Industry Buying Guide

AMEC Australia Pty Ltd

Andrew Engineering Pty Ltd

About:

Activity:

AMEC (LSE: AMEC) is a focused supplier of consultancy, engineering and project management services to its customers in the world’s oil and gas, mining, clean energy, environment and infrastructure markets. With annual revenues of some £4.2 billion, AMEC designs, delivers and maintains strategic and complex assets, and employs over 29,000 people in around 40 countries worldwide.

With the rapid development of new generation global rail transportation systems and the demand on the Australian Rail network. Andrew Engineering has taken up the challenge to develop and provide innovative solutions for the Australian transport industry. Andrew Engineering offers a broad range of professional and technical services:

See amec.com.

•

Engineering, Design, Manufacture, Test, Install and Commissioning

Website:

•

Build to Customers’ Specifications and/or Drawings

www.amec.com

•

Turn Key Solutions

•

Infrastructure – Design and Construct

Offices: WA

•

Bogie Lifting and Transfer System

•

Reverse Engineering of Outdated Components

•

Production Manufacturing and Machining

•

Robotic Weld Cells

•

Rail Equipment Agencies

•

Design Engineering Consulting

•

Project Management

•

Engineering Analysis

•

Site and Equipment Maintenance

•

ISO 9001 Certified.

Address:

Phone:

Level 7, 197 St Georges Terrace, PERTH, WA 6000

08 9347 4777

Ampcontrol Pty Ltd Activity:

Website:

Ampcontrol is a group of companies incorporating Engineered Electrical Solutions for the coal and metalliferous mining markets, tunnelling industry and the power energy markets. Additionally, ongoing support by way of overhaul via workshop and field service is also provided.

www.andeng.com.au

Products: Mining Electrics Transformers Electrical Switchyards Mobile Substations IS-LED and Flameproof Lighting systems

Address:

Phone:

86-90 Northern Road, WEST HEIDELBERG, VIC 3081

03 9458 1066 03 9458 1755

Fax:

APB Modular

Mining relays Mining Gas systems

Offices: QLD

Enviromental Gas detectors Conveyor Control and Communication systems IS Phone system IS power supplies Machine electrics.

New Products: IS Power supply

Address:

Phone:

2 / 76 Quinns Hill Road East, YATALA QLD 4207

07 3807 5222 07 3807 5141

Fax:

Aquenta Consulting

IS Led Lighting.

Other Countries: UK; Russia; South Africa; China; New Zealand; Hong Kong.

Website:

www.ampcontrolgroup.com Offices: NSW Address:

Offices: VIC

Phone:

Fax:

21 Old Punt Road, 02 4961 9000 02 4961 9009 TOMAGO, NSW 2322

Website:

www.aquenta.com.au Offices: QLD Address:

Phone:

Fax:

L10, 07 3210 1366 07 3210 1788 100 Edward Street, BRISBANE, QLD 4000

MESCA MEMBERS DIRECTORY VOL 8 • 21

MESCA SUPPLIERS Industry Buying Guide

Armstrong Electrical Wholesalers Atlas Steels Offices: WA

Activity:

Address:

Phone:

Fax:

61 King Edward Road, INALOO CITY, WA 6918

08 9445 3733 08 9446 4864

Atlas Sales and Distribution Atlas Steels is a private company, with Service Centres incorporating a distribution and metals processing network that encompasses 17 major cities and towns across Australia and New Zealand. Atlas, over many years of participation in the specialty metals industry, has built a high level of knowledge and expertise that has helped to build the company to the largest in its market and offer superior customer service. We do this by providing:

Astec Australia Pty Ltd Offices: QLD Address:

Phone:

Fax:

13 / 243 Bradman 07 3714 8800 07 3714 8899 Street, ACACIA RIDGE QLD 4110

•

a comprehensive range of specialty metal products

•

locations in all states of Australia and New Zealand

•

personnel who can readily understand the specific needs of product users

•

nationally integrated SAP computer-based sales and inventory systems

•

extensive global product sourcing network from reputable mills

•

warehouse facilities, systems and procedures that cater to the needs of processing and handling specialty metals – Quality system accredited to ISO9002:2008.

Plate profile cutting Atlas Steels offers a full service of Plasma and Oxy profile cutting of stainless steel, and quenched and tempered plate to customers’ supplied drawings.

Atlas Copco Construction & Mining Australia

Stainless Steel Tube and Precision Carbon Steel Tube Manufacturing: The Atlas Steels tube manufacturing facilities of New Zealand Tube Mills located in Wellington New Zealand is a leading manufacturer of stainless steel tube and carbon steel precision tube for the Australian and New Zealand markets.

Offices: NSW Address:

Phone:

PO Box 6134, BLACKTOWN, NSW 2148

02 9621 9707 02 9621 9812

Fax:

Band saw Bar and Pipe cutting Atlas operates automated band saw at most warehouse locations for cutting bar and pipe to service local customers. Atlas has access to polishing equipment, and tube and pipe product can be converted very quickly to a polish product should it not be available off the shelf. Project Services: A substantial part of the Atlas Steels business is associated with the supply of steel products and associated services to industrial development and infrastructure projects. The types of the steel products distributed by Atlas are usually application specific and often special grades and form supplied fit-for-purpose. Our knowledge and expertise has been built up over 70 years of experience in the Australian, New Zealand, Pacific and Asian markets, and we have an established and proven global supply network to enhance our Project Supply management program. In addition, Atlas Steels has invested in IT systems that allow the components for your customer project to be instantly tracked and updated, even if there are thousands of items involved. Atlas Steels has the capability to use your project material identifiers in all material labelling and customer documentation to improve communication and subsequent receipting of material at the project site.

Astec AustrAliA the One sOurce YOu cAn cOunt On

Technical Services Atlas Steels provides technical support for its steel and Aluminium products to customers through our qualified and experienced staff at our distribution and processing operations. The following are typical of what can be provided: •

assist with grade selection and metallurgical properties of our products

•

assist with product selection to meet specific needs

•

assist with the nomination and interpretation of specifications

•

recommend fabrication procedures

•

investigate problems when they occur, and

•

train staff and those of our customers in the use of stainless and specialty steels.

Products: Stainless Steel Sheet, Coil and Strip Stainless Steel Plate Stainless Steel Tube, Fittings and Flanges Stainless Steel Pipe, Fittings and Flanges 1300 278 322 (1300 ASTEC AUS) www.astecaustralia.com.au

327506A_Astec | 2065.indd 1 22 • Australia MESCA MEMBERS

DIRECTORY VOL 8

31/10/13 2:22 PM

Stainless Steel Bar and Wire Carbon Steel Pipe, Fittings and Flanges

MESCA SUPPLIERS Industry Buying Guide

Activity:

Carbon Steel Precision Tube Heat Exchange and Condenser tube

AUSLEC provides tailored solutions for the supply of Electrical, Industrial and Safety consumables Australia-wide.

Hydraulic and Pneumatic tube

Recognised as providing innovative solutions in the supply of industrial electrical, safety and consumable engineering products, AUSLEC has accumulated a strong, diverse portfolio of customer reference sites in heavy industry, mining, petrochemical, manufacturing and facilities maintenance. Major industrial construction projects in which we have played a significant role include:

Aluminium Sheet and Coil/Strip Aluminium Plate Aluminium Treadplate Engineering Steel Bar Quenched and Tempered Steel Plate.

•

Millmerran Power Station, QLD

•

Stuart Shale Oil Project, QLD

•

Comalco Alumina Refinery Stage 1, QLD

Specialisation:

•

Kutubu Oil Project, PNG

Stainless Steel Specialty Metals and Carbon Steel Pipe, Flanges and Fittings Project Service supporting as facets of client project needs from feasibility through to completion.

•

Darwin LNG plant, NT

•

Boyne Smelters, QLD

•

Gobe Oil, PNG

Website:

•

Port Waratah Coal Services, NSW.

Other Countries: New Zealand.

Products:

www.atlassteels.com.au

Abrasives

Offices: QLD Address:

Phone:

Fax:

40 Coulson Street, WACOL, QLD 4076

07 3246 9999 07 3246 9966

Adhesives, Packings and Sealants Air Movement Automation and Control Chemicals Conduit and Duct Cutting Tools

Ausenco Limited

Electric Cable and Ladder Electric Motors

About:

Electronics

Ausenco is a leading provider of engineering and program management services to the global energy and resources sectors.

Enclosures

Across 30 offices in 19 countries, Ausenco offers our clients ingenious solutions in our areas of expertise – ports and terminals, energy, pipeline systems, minerals processing, infrastructure, operations and maintenance, transportation systems and environment and sustainability.

Hand Tools

We provide services across the full project life cycle, searching for new and better ways to add value to our clients’ projects.

Height and Fall Protection

We go further, beyond expectations to deliver practical, fit-for-purpose solutions to complex problems. Our people work together and with our clients, our communities and the environment to achieve more to make a genuine impact on the world around us.

Hose, Fittings and Valves

Hardware Hazardous Area Equipment Hygiene Instrumentation Janitorial Lamps

Website:

Lifting and Rigging

www.ausenco.com

Lighting Lubricants

Offices: QLD Address:

Fasteners

Phone:

Fax:

144 Montague 07 3169 7000 07 3169 7001 Road, SOUTH BRISBANE, QLD 4101

Auslec About: AUSLEC is a trading name of L&H Group, a leader in value-added business to business distribution (B2B) services. We form part of the global familyowned company Sonepar represented by over 100 companies operating out of 30 countries on five continents. Trading as AUSLEC, Lawrence and Hanson, Pacific Datacom, Smarter Clothing, Specialised Lighting Solutions, and L&H Solar Plus Solutions, the group has over 160 strategically located branches across the country.

Materials Handling and Storage Mechanical Equipment Non-Conductive Tools and Equipment Paints Power Tools PPE Safety / Environmental Safety Showers Safety Signage Tapes and Packaging Test and Measurement Equipment Traffic Management Voice / Data / Video Welding Work Clothing Workshop Machinery.

MESCA MEMBERS DIRECTORY VOL 8 • 23

MESCA SUPPLIERS Industry Buying Guide

Other Countries:

Offices: Head Office – QLD Address:

Singapore; Malaysia; Thailand.

Phone:

Fax:

173 Cobalt Street, 07 3271 2622 07 3271 3689 CAROLE PARK, QLD 4300

Website:

www.auslec.com.au Offices: NSW Address:

Phone:

3 Revelation Close, TIGHES HILL, NSW 2297

02 4961 2022 02 4962 2062

Fax:

Austral Alloys Website:

www.australalloys.com.au Offices: NSW

Austin Engineering Ltd About: Founded in 1982, Austin Engineering Limited (ASX: ANG) is a publicly listed engineering and manufacturing company with its core business in the mining and resources sector. The company has Australian manufacturing facilities in Brisbane, Perth, Mackay and Muswellbrook, overseas in the American state Wyoming through its subsidiary Western Technology Services (Westech), Austin Ingenieros Chile, located in the northern mining regions of Antofagasta and Calama, Austin Ingenieros Colombia at Barranquilla, Austin Engineering Peru in Lima and Austin Engineering Indonesia at Batam Island. In addition, a joint-venture operation in the Middle East provides Austin Engineering with a manufacturing facility in Oman. Each Austin Engineering operation provides an array of manufacturing, repair and support services to the mining, oil and gas, aluminium and industrial sectors. Other Austin Engineering Group Members, Austbore (machining and line boring), Pilbara Hire (on-site repair and maintenance services) and COR Cooling (industrial heat exchange solutions), further increase the range of products and services on offer.

Activity: Austin Engineering is the largest non-OEM manufacturer of customised mining buckets, dump truck bodies and ancillary products, including the reputable JEC and Westech brands. In addition to bodies and buckets, the JEC product range covers almost any and every attachment application in the mining, earthmoving, materials handling and quarry sectors. Standard and customised designs are catered for from the specific requirements of OEMs to end users. Experts in solving engineering challenges, Austin Engineering has a history of improving machine efficiency and safety.

Other Countries: Indonesia; USA; South America.

Specialisation: Provision of innovative engineered solutions to meet resource sector customers’ equipment challenges.

Website:

www.austineng.com.au

24 • MESCA MEMBERS DIRECTORY VOL 8

Phone:

174–176 Eldridge Road, BANKSTOWN, NSW 2200

02 9790 5110 02 9790 2186

Fax:

Australia-China Developments Centre About: Australia-China Development Group, or AXCEN, is a one-stop China consultancy in Australia. AXCEN represents over 40 Chinese cities and their companies in Australia. AXCEN has offices across Australia and China, and has an extensive network of experienced professionals throughout China and Australia.

Specialisation: AXCEN takes the stress out of doing business between Australia and China by leveraging its relationship, networks, experiences and knowledge of delivering projects in Australia and China. AXCEN specialises in achieving targets by initiating and managing strategy and interpersonal relationships, undertaking negotiation and communication tasks, advising culture, custom, politics, mediating conflict and implementing projects between stakeholders in Australia and China.

Website:

www.axcen.com.cn & www.axcen.com.au Offices: QLD Address:

Products: Off-highway dump truck bodies, excavator buckets, wheel loader buckets, tyre handling equipment, water tank modules, lubrication, service and fuel modules, attachments eg. stemming buckets and cable reels, specialised and heavy fabrication, repairs and maintenance services – on- and off-site, specialised machining and line boring, cooling systems and services.

Address:

Phone:

Fax:

9/17 Peel Street, 07 3846 3221 07 3272 8045 SOUTH BRISBANE, QLD 4101

Australia Overnight Trucking Co About: We are small enough but big enough to look after your transport and storage needs. Our customers range from international blue chip companies, Australian companies and small individual businesses.

Activity: We are a trucking company that has more than twenty years of local, country and interstate experience. •

Specialising in commercial Furniture, over dimensional loads and mining equipment

•

Dedicated trucks and run outs

•

We do pick-ups and deliveries 24 hours, 7 days a week

MESCA SUPPLIERS Industry Buying Guide

•

We can supply taurtliners, flatbed, dropdeck and lowloaders

•

We also supply dedicated trucks with tailgates

•

Staff relocations Australia-wide.

New Products: Wireless Monitoring Systems.

Other Countries:

Products: We are a service provider of all modes of transport.

Represented in the Philippines by PrinceACE Corporation and by Ace Conveyors Beijing Company Limited in China.

Offices: NSW

Specialisation:

Address:

Phone:

PO Box 1136, DUNDAS, NSW 2117

02 9955 2975 02 9955 0409

Fax:

Australian Conveyor Engineering Pty Ltd About: The Directors of ACE have been industry leaders in conveyor design, engineering, manufacture and installation for over 25 years. Their coordinated efforts deliver the very best in conveyor system development.

Activity: Australian Conveyor Engineering is a 100% Australian, owner managed company that specialise in providing complete conveyor solutions for both surface and underground mining and the bulk materials handling industry.

Products: The ACE range includes surface, maingate, trunk and drift conveyors and associated equipment, including:

Conveyor Specialists.

Website:

www.conveyor.net.au Offices: Head Office – NSW Address:

Phone:

68-70 Chivers Road, SOMERSBY, NSW 2250

02 4370 9500 02 4370 9595

Fax:

Australian Industrial Rental Pty Ltd About: AIR has branches in Mt Isa, Townsville, Mackay and Adelaide with the National Head office function operated out of Southport. In addition to the main branch locations, AIR has Satellite branch locations in Weipa, Emerald, Brisbane, Sydney, Melbourne and Kalgoorlie. The focus of the business is to supply mines with high-quality generators, compressors, pumps and light towers supported by highly trained technicians dedicated to service. We know that our customers require reliability and we take a partnering approach to every project.

•

driveheads

•

loop take-ups

•

VSD/CST substation starters

•

electric winches

•

pulleys

•

jibs

•

variable speed belt reelers

•

transfer stations

•

boot ends

•

development conveyor drives – ACE Caddy Conveyor

•

electrical control systems and switchgear, including PLC and SCADA systems

•

hoppers

Generators

•

surge bins

Compressors

•

crushing stations.

Pumps

Our specialisation, particularly in the supply of Power Station, sets us apart from most suppliers and has seen our business grow in Queensland’s north with power stations in Cloncurry, Mt Isa, Mt Garnet, Chillagoe and Prominent Hill.

Activity: Australian Industrial Rental is an expert supplier of Generators, Compressors, Pumps and Light Towers to the civil and mining sectors, and specialises in the supply of Power Station sets.

Products:

Light Towers.

327503A_Australian Industry | 2065.indd 1

2:04 PM MESCA MEMBERS DIRECTORY31/10/13 VOL 8 • 25

MESCA SUPPLIERS Industry Buying Guide

B&C Plastics

Specialisation: Supply and service of Power Station sets.

About:

Website:

www.australianindustrial.com.au Offices: National Head Office – QLD Address:

Phone:

Fax:

Unit 1, 82-86 Minnie Street, SOUTHPORT, QLD 4215

07 5531 0050

07 5531 0566

Based in Brisbane, Queensland, B&C Plastics is one of Australia’s most trusted injection plastic moulding specialists. With decades of experience, we have one of the most respected teams in the country, and are well versed in all stages of plastics development. At B&C Plastics, we also like to do things a little differently. Even though we are a contract manufacturer, we have total focus on customer service. We are large enough to utilise industry-leading technology, but small enough to be responsive to all of our clients’ needs. We also like to keep things simple…

Automated Positioning Systems Offices: QLD Address:

Phone:

803 Beaudesert Road, ARCHERFIELD QLD 4108

07 3277 2100 07 3277 2023

Fax:

We have developed the B&C Process, a five-stage development cycle to ensure that our clients are fully up-to-date and well informed at all stages of production. We are a member of the Queensland Tooling Network and pride ourselves on providing sustainable injection moulding options for our clients with a full range of ISO9001 certified services available.

Activity: Concept Design Component Design Models and Prototyping Mould Design and Mould Making

AWX

Plastic Injection Moulding

About:

Products:

AWX solves short- and long-term staffing requirements, as well as providing a range of mining support services. We are focused on delivering value for our industry partners.

Plastic Centralisers, CSG

Testing and Production.

Since our humble beginnings in 2000, AWX has thrived because of a young and vibrant culture with “can-do” attitudes built from strong core values.

Rollers, Handles, Plastic Enclosures.

New Products: Queensland Gas Company – Innovation rewarded

Our promise = To deliver the RIGHT workforce, both FLEXIBLE AND SAFE.

QGC has solved a technical problem in Queensland coal seam gas extraction that not only saved hundreds of thousands of dollars, but improved safety and resulted in a global innovation and technology award.

Products:

Specialisation:

1) We solve short- and long-term staffing requirements through:

Concept Design

Contract Staff (including maintenance, construction and shut down crews)

Component Design

Labour Hire

Models and Prototyping

Recruitment

Mould Design and Mould Making

Work ready programs

Plastic Injection Moulding

International recruitment

Testing and Production.

Activity:

Indigenous employment. 2) We also provide Mining Support services including:

Website:

Mine site services – Building, construction and maintenance

www.bcplastics.com.au

Plant and Equipment

Offices: QLD

Village and Camp Accommodation Asset Management.

Website:

www.awx.com.au Offices: QLD Address:

Phone:

90 Petrie Terrace, BRISBANE, QLD 4001

07 3238 0800 07 3238 0888

Fax:

26 • MESCA MEMBERS DIRECTORY VOL 8

Address:

Phone:

Unit 1, 43 Parramatta Road, UNDERWOOD, QLD 4119

07 3208 0555

MESCA SUPPLIERS Industry Buying Guide

B & R Enclosures Pty Ltd

zinc coated sheet metal

About:

non-metallic polyester

aluminium

B&R Enclosures was founded in 1955 to specialise in the fabrication of enclosures for domestic electrical metering equipment. Since operations began, B&R Enclosures has remained an Australian-owned and operated company specialising in the design and manufacture of quality enclosures. The end result is a quality product backed by our certification to ISO 9001:2008. B&R has grown to be the largest manufacturer of domestic, commercial and industrial enclosures in Australia. Today, B&R encompasses four divisions: B&R Enclosures, B&R Ex Systems, B&R Data Systems and B&R Domestic Commercial, each of which focuses on the unique needs of different market segments. Together, these divisions share the strengths, resources and experience of B&R Enclosures to provide attentive customer service, innovative design and superior quality products.

Activity: B&R is Australia’s largest manufacturer of enclosures, racks and cabinets, supplying Australia, New Zealand, Asia and the world. B&R Enclosures is an Australian family-owned and operated company with a national focus and an increasing international distribution channel.

state-of-the-art motor control centres.

Equipment: Steel, Stainless steel and aluminium fabrication CNC punching, guillotining, bending, metal fabrication Powdercoating facilities Plastic moulding of insulation materials for electrical applications.

Specialisation: Custom-made products Domestic and industrial products Powdercoated zinc products Switchboard building systems Motor control centres (MCCs) Stainless steel products Aluminium products Australian made products.

Website:

Products:

www.brenclosures.com.au

Electrical enclosures for industrial, hazardous areas, domestic and commercial applications, 19-inch racks, switchboard building systems, climate control systems and racks and accessories designed specifically for telecommunications industry.

Offices: Head Office – QLD

New Products: Standard and custom-designed products including: stainless steel

Address:

Phone:

Fax:

51 Stradbroke Street, HEATHWOOD, QLD 4110

07 3714 1000

07 3714 1081

Born and

Australian

B&R Enclosures is a 100% Australian family-owned and operated business, with a proud history and a proven reputation for high-class products and reliable service. At B&R, we understand the requirements of each application and offer an extensive range of products to suit the individual needs of our customers. Enclosure solutions include: • Mining Infrastructure • Road, Rail and Port Infrastructure • Telecommunications Infrastructure • Process Control • Hazardous Area Equipment

brenclosures.com.au

MESCA MEMBERS DIRECTORY VOL 8 • 27

MESCA SUPPLIERS Industry Buying Guide

track record of outstanding results across the diversity of projects we undertake.

BANLAW

WHAT WE DO

About: Australian company with 30 years’ experience in the design, manufacture and implementation of world-class hydrocarbon management systems for the mining, rail, fleet and port industries.

Activity: Banlaw currently exports to 25 countries. We can provide you with innovative, integrated and secure refuelling and hydrocarbon management systems to help you control costs, ensure environmental performance and contamination control.

We offer expert knowledge, commitment and experience to each stage of a project with complete dedication to safety and delivery. We maintain the expertise and resources to manage projects from conceptual planning to engineering and construction delivery. We are proud of our achievements in all aspects of our completed projects and the role that each team member contributes to ensure the continual success of the Bauer Field Group, our customers and the community. We are dedicated to our charter that describes our values for every action we undertake.

Activity: MARKETS WE SERVICE

Products: FuelTrack, Fillsafe, Refuelling, Lube Central. World’s best technology, built for tough operating conditions, customised, integrated systems with ongoing support.

We are a leading service provider for high-value safety aligned planning, engineering, procurement and construction (EPC); engineering, procurement and construction management (EPCM) on both new assets and remedial infrastructure projects. Primarily, we provide services to the following markets:

New Products: Check Valve fuel receiver is unlike any other product on the market. Cannot be overridden, eliminating fuel theft via the receiver.

Other Countries: USA; England; Africa; South Africa; Indonesia; China.

Specialisation: Fuel security, environmental performance, cost control, contamination control.

Website:

www.banlaw.com.au Offices: NSW Address:

Phone:

19 Metro Court, GATESHEAD, NSW 2290

02 4922 6300 02 4920 6171

Fax:

•

Mining

•

Infrastructure

•

Energy.

Our experience and commitment to excellence means our customers can be confident that we will coordinate and manage assets and projects safely. We have built a reputation for providing innovative, value-added solutions for major resource providers, governments, developers and independent producers. Our capability and proficiency of alliancing and partnering as an option to deliver large and increasingly complex projects competitively has allowed us to have a proven and successful track record. We have unparalleled expertise in delivering projects for our customers safely, on time and to budget. Our ability ensures we provide industry best practice in terms of planning, engineering and construction services that are responsive, innovative and sustainable. This achieves complete confidence for our customers for every project undertaken.

Products: SERVICES WE PROVIDE

BASF Australia Pty Ltd

We are committed to providing services that are result-driven delivering excellence in terms of service, high-value engineering solutions, upholding our values. Planning:

Offices: VIC Address:

Phone:

Level 12, 28 Freshwater Place, SOUTHBANK VIC 3006

03 8855 6600

Bauer Field Mining & Engineering Australia Pty Ltd About: WHO WE ARE We are a multidisciplinary planning, engineering and construction company working in natural and built environments undertaking and understanding the challenging issues that are most relevant to mining, infrastructure and energy sectors. We uphold a culture of safety, people, innovation, performance, achievement, and sustainability. This has enabled us to deliver a proven

28 • MESCA MEMBERS DIRECTORY VOL 8

•

Delivery

•

Development

•

Health & Safety and Management.

Engineering: •

Civil

•

Hydrology

•

Mechanical

•

Pipeline Systems

•

Transport.

Construction: •

Civil.

Website:

www.bauerfield.com Offices: QLD

MESCA SUPPLIERS Industry Buying Guide

Address:

Phone:

Riparian Plaza L36, 1300 1 BAUER 71 Eagle Street, BRISBANE, QLD 4000

BDO (Qld) Pty Ltd About: BDO is the fifth largest full-service audit, tax and advisory firm in the world with offices in 135 countries worldwide.

Offices: NSW Address:

Phone:

Level 10, 1 Margaret Street, SYDNEY, NSW 2000

02 9251 4100

Berg Engineering Pty Ltd About:

BDO has a large network of industry professionals who are able to offer strategic and operational advice to the natural resources sector, both in Australia and around the world.

With a multi-million dollar investment in computer-controlled machinery, Berg Engineering prides itself on providing industry with high-quality, precision products and services. During its 30-plus years in operation, Berg Engineering has built a reputation in the Mining, Mineral Processing industry.

Activity:

BDO offers a wide range of integrated service delivery specialisations, with experts in accounting, tax, advisory and operational matters, and a focus on mining, energy, oil and gas. BDO offers expert advice and assistance in relation to all aspects of customs practice and procedure, including duty concession applications under the Enhanced Project By-Law Scheme (EPBS) and Tariff Concession System (TCS). We are presently assisting several clients in securing duty concessions on major projects in the mining and resource processing sectors. With savings typically being 5% of the FOB Cost of capital equipment our services provide significant benefits for our clients.

Products: BDO has helped clients maximise customs duty savings for many years. The combined experience of our dedicated Customs & International Trade professionals represents a unique offering covering the entire customs field, including the duty concessions, transfer pricing, the Tradex Scheme, customs valuation, dumping and tariff preference.

Innovative Engineering Solutions that encompass the rebuilding, repairing, re-engineering, maintaining and manufacturing of high-risk critical assets, including pumps, valves, gearboxes, couplings, screens, rotors, autoclaves, brake systems, shafts, centrifuge and Pulleys.

Products: Slurry Valves, Pumps, Shafts, Drums, Valve Stems and Disc, Screens, Brake systems, Pins, Centrifuges, Crusher components, OEM components, Bearings, Drive Pulleys.

New Products: NATA Certified Testing to AS, Titanium Precision welding, Plasma Transferred Arc, Wear Plates.

Other Countries: Indonesia; PNG; New Caledonia; Asia Pacific

Services Include:

Specialisation:

Customs concessions:

Hardfacing, Valve Refurbishment, Pump Servicing, Wear Plate, PTA, Autoclave, Pump Sleeves, Wirth/Geho Pump Valves.

•

Customs Duty and GST

•

Enhanced Project By-law Scheme (EPBS)

•

Tariff Concession Applications

•

Tradex / Duty Drawbacks

•

Tariff preference including Free Trade Agreements (FTAs)

Other areas of assistance: •

Export Market Development Grants (EMDG)

•

R&D Tax Concessions and Incentives

•

Government Grants

•

GST and other specialist taxes.

New Products: There have been several recent changes to the Enhanced Project By-Law Scheme (EPBS). Let our experienced team assist you in maximising the benefits available under government schemes for your projects.

Website:

www.bergeng.com.au Offices: QLD Address:

Phone:

PO Box 5136, BRENDALE MC, QLD 4500

07 3881 6221 07 3881 6200

Fax:

BGC Contracting Pty Ltd About:

Other Countries:

Wholly owned subsidiary of BGC (Australia) Pty Ltd, one of Australia’s largest privately owned companies.

Clients can draw on the skills of BDO member firms in 135 countries around the world.

Activity:

Specialisation: Mining services companies require sophisticated advice to guide them through increasingly complex accounting, tax and operational issues. They need the services of a trusted adviser with specialised, relevant and local knowledge in the countries in which they operate – supported by a global network of professionals with mining expertise.

Website:

BGC Contracting Pty Ltd undertakes a diverse range of work servicing the mining and infrastructure sector.

Products: Contract Mining, Drill and Blast Services, Dozer Push, Top Soil Stripping, Spoil Rehabilitation, Mine Infrastructure Construction, Load and Haulage, Dam Construction, Civil Contracting, Bulk Earthworks, Contract Crushing and Screening, Concrete Works, Pipeline Construction, Roadworks and Bridge Construction, Materials Handling, Road Maintenance.

www.bdo.com.au MESCA MEMBERS DIRECTORY VOL 8 • 29

MESCA SUPPLIERS Industry Buying Guide

New Products: Overburden Drilling and Blast Services including design.

Activity:

Specialisation:

Our products have been used in a range of applications, including reticulation lines for Water Supplies, Compressed Air, Instrument Air, Fuels, Oils, Gases and Fire Sprinkler Systems.

BGC Contracting: – Is part of the privately owned BGC Group – Operates in two distinct core business units: •

Mining Operations

•

Civil Operations

subcontractors for potable water, compressed air, gas and oil lines, treated water and other services across Australia.

Products:

– Provides the following services: •

Contract mining

•

Civil construction

•

Infrastructure maintenance

•

Crushing and quarry materials

Designed to perform in demanding conditions and with large cost benefits to projects, both the drainage and pressure systems are increasingly being specified in a wide range of industries and processes.

Blucher Australia supply stainless steel Blucher Drainage and Blucher PressFit pressure piping from 15 to 168mm diameters. Our products offer substantial installation time savings and safety improvements over site welding and other methods of installing stainless tube with our press-fit and push-fit designed connections.

– To the following sectors: •

Mining and Resources

New Products:

•

Gas and Energy

•

Building and Manufacturing.

Our Blucher Press-Fit range is now available in the larger 168mm (6”) diameters using the same press-fit connection design for this 316 stainless steel range.

Website:

Equipment:

www.bgc.cc

In demanding plumbing environments where temperature, hygiene, strength and durability are essential, stainless steel is the logical choice.

Offices: QLD Address:

Phone:

Fax:

Locked Bag 2019, ARCHERFIELD BC, QLD 4108

07 3119 0900

07 3119 0999

It may cost more initially, but in system life cycle terms, it’s a clear winner in return on investment.

Specialisation: Technical knowledge and leading with product quality, supply and customer support. Our products offer a quicker, safer and reliable piping solution for both new installs and shutdown periods where time and skilled labour is a premium.

Bid Write Pty Ltd

Website:

Offices: WA Address:

Phone:

Fax:

Suite 3, 642 Newcastle Street, LEEDERVILLE WA 6903

08 9227 0031 08 9227 0069

Bis Industrial Logistics

www.blucher.com.au Offices: SA Address:

Phone:

Corunna Avenue, MELROSE PARK, SA 5039

08 8374 3426

BlueScope Steel Limited

Website:

www.bislimited.com

About:

Offices: NSW Address:

Phone:

PO Box 251, THORNTON, NSW 2322

02 4949 1408 02 4966 1633

Fax:

Blucher (Australia) Pty Ltd About: We supply stainless steel Blucher Drainage and Blucher Press-Fit pressure piping products. We’ve been working with project consultants and installers involved with industrial scale projects for over 20 years, gaining our extensive experience and technical support. From product supply, on-site tool training for installers and comprehensive customer support, we have supplied a range of mining companies and

30 • MESCA MEMBERS DIRECTORY VOL 8

BlueScope Steel is the leading producer and supplier of flat steel products in the Australian market and an important supplier of steel to Australia’s mining, oil and gas, and engineering infrastructure sectors. Products manufactured by BlueScope Steel can be found in numerous major resource projects where it has been used in applications such as: storage vessels and tanks; rail and port infrastructure; mining machinery and equipment; transport equipment; buckets and jaw attachments; coated steel and framing for modularised accommodation and welded beams in support structures. Health, Safety and Environment BlueScope takes its responsibilities in the area of health and safety very seriously, and seeks to continually improve its outstanding safety record by aspiring towards a goal of zero harm to people. This goal is an important driver for continuous improvement in performance across BlueScope Steel. A company-wide Occupational Health and Safety Management System exists to ensure the health and safety of employees, customers, contractors, visitors and the public. BlueScope Steel is also committed to continual improvement in environmental performance and the efficient use of natural resources.

MESCA SUPPLIERS Industry Buying Guide

Wherever the company operates, it develops, implements and maintains management systems for health, safety, environment and the community that are consistent with internationally recognised standards, and uses product stewardship for the development and management of all products from concept through to end of life.

BMT-WBM Pty Ltd

Activity:

- Troubleshooting and design audits for major plant and equipment used in mining, power generation, transport and port operations

BlueScope Steel’s annual production capacity is 2.6 million tonnes, and key flat steel products manufactured are slab, hot rolled coil, cold rolled coil, plate and value-added metallic coated and painted steel products (also used by building and construction, automotive and manufacturing industries). The Port Kembla steelworks supports Australia’s largest steel research team who work on new generation steel coatings and improvements in steel products for use in key sectors such as mining. BlueScope Steel’s Port Kembla operation is accredited to ISO:9001 ensuring products comply with Australian Standards. BlueScope’s flat steel products are available via key steel distributors around Australia, and BlueScope Steel Distribution supplies both long and flat steel products from its extensive Australia-wide network.

Products: BlueScope Steel’s steel portfolio of products includes a number of wellknown steel brands: COLORBOND® steel

About: BMT WBM operates in a diversified range of niche market areas including:

- Environmental engineering and sciences. BMT WBM has expanded its presence worldwide to locations close to its key market and client sectors to ensure delivery of optimum service and provide personal and professional opportunities for staff. BMT WBM is part of the BMT group of companies.

Activity: BMT WBM has built a reputation for solving the more difficult and challenging problems facing machinery designers, manufacturers and operators. Underpinning this reputation is an innovative, analytical approach, a very comprehensive measurement and analysis capability, and a highly qualified, highly experienced team of professionals. From massive bulk handling equipment to small mass produced machinery components, BMT WBM provides assistance in the acquisition or design of new machinery. For operators of existing machinery, BMT WBM offers a range of services aimed at reducing costs, improving operational performance, efficiency and safety, and in extending life. With specialists covering all engineering disciplines from mechanical, electrical, structural, and controls to fluid power hydraulics, BMT WBM provides a totally integrated service to address any machinery requirement.

ZINCALUME® steel XLERPLATE® steel GALVASPAN® steel

BMT WBM has extensive experience in the following industries:

XLERPLATE LITE® steel

•

Surface mining

TRUECORE® steel

•

Underground mining

DECKFORM® steel.

•

Conveying

New Products:

•

Mineral processing

•

Ports and bulk handling

•

Power generation and process industries

•

Rail, road and shipping.

SURELINE® Steel Power Poles.

Other Countries: In addition to the company’s Australian operations, BlueScope operates manufacturing facilities in New Zealand, throughout Asia (including China, Thailand and Indonesia), North America (50-50 joint venture, North Star BlueScope Steel), India (including a joint venture with TATA Steel) and throughout the South Pacific.

Website:

Our activities include: Machine Design and Product Development BMT WBM offers a total design capability for all types of machinery, ranging from complete mining and bulk handling systems to small mass produced components. Advanced Analysis

www.bluescopesteel.com Offices: NSW Address:

Phone:

PO Box 1854, WOLLONGONG, NSW 2500

02 4275 3180 02 4275 7190

Fax:

At BMT WBM, analysis is a key element in the overall approach to solving machinery problems. It is an integral part of the design, troubleshooting, failure analysis, performance enhancement and life extension services, which WBM provides. Test and Measurement Another cornerstone of BMT WBM’s approach in assisting clients with machinery problems is the use of diagnostic measurements under actual operational conditions. Asset Management

Blundstone Australia Pty Ltd

To assist owners and operators of equipment to better manage and maintain capital assets over their operational lifetime, the company offers a comprehensive range of services. Design Audits

Website:

A world leader in auditing the design of large and complex machinery, BMT WBM has completed audits on more than 40 major machines for clients in many countries throughout Africa, Asia, North and South America, as well as Australia.

www.blundstone.com Offices: TAS Address:

Phone:

88 Gormanston Road, MOONAH, TAS 7009

03 6271 2200 1800 062 780

Fax:

Project Engineering Services BMT WBM has a large, experienced and capable group, which specialises in providing services in support of engineering projects. Accident Investigation, Failure Analysis The company has been involved in many accident investigations, especially with large bulk handling machines.

MESCA MEMBERS DIRECTORY VOL 8 • 31

MESCA SUPPLIERS Industry Buying Guide

Expert Witness Advice, Arbitration A large number of BMT WBM’s staff have experience as expert witnesses on legal matters covering a very broad range of technical issues, but mainly related to accidents and machinery failures.

New Products: •

High Integrity Shiploader Boom Protection

•

Discrete Element Modelling

•

Mining machinery machine-house filtration studies

•

Explosion modelling and modelling of suppression

•

Dragline Production Monitor.

Bonser Design About: Since 1981, Bonser Design has been forging strategic partnerships with our clients and developing creative solutions to meet their needs in the areas of branding and marketing communications. Through our diverse portfolio of local, national and international clients, we have developed a unique breadth of experience and expertise in markets throughout Australia and in the fast-growing and challenging regions of South-East Asia and China.

Specialisation:

Equipment:

Brand Development

BMT WBM has a diverse range of custom and proprietary test equipment for:

Graphic Design Corporate and Marketing Communications.

•

long- and short-term data acquisition

•

extensive multi-channel capability

Website:

•

load, stress and strain

•

torque

www.bonserdesign.com.au

•

vibration

•

displacement

•

pressures.

Offices: WA

Other Countries: Vancouver, Canada; Denver, Colorado, USA.

Specialisation:

Address:

Phone:

Suite 17, 336 Churchill Avenue, SUBIACO, WA 6008

08 9382 1155

Bosch Rexroth Pty Ltd

Machinery Design and Analysis.

Website:

About:

www.bmtwbm.com.au Offices: QLD Address:

Phone:

Level 8, 200 Creek Street, BRISBANE, QLD 4000

07 3831 6744 07 3832 3627

Fax:

The Bosch Group is a leading global supplier of technology and services. According to preliminary figures, more than 300,000 associates generated sales of 51.4 billion euros in the areas of automotive and industrial technology, consumer goods and building technology in fiscal 2011. This worldwide development, manufacturing and sales network is the foundation for further growth. Bosch spent more than 4 billion euros for research and development in 2011 and applied for over 4,100 patents worldwide. With all its products and services, Bosch enhances the quality of life by providing solutions that are both innovative and beneficial.

Activity:

BOC Limited Offices: QLD Address:

Phone:

PO Box 40, ARCHERFIELD, QLD 4108

07 3212 4201 07 3212 4115

Fax:

Bonfiglioli Transmissions Australia Pty Ltd Offices: NSW

Bosch Rexroth is one of the world’s leading specialists in the field of drive and control technologies. Under the Rexroth brand, the company supplies more than 500,000 customers with tailored solutions for their driving and controlling requirements. Bosch Rexroth is a partner for Mobile Applications, Industrial Applications, Factory Automation and Renewable Energies. The company provides customised solutions tailored to the needs and specifications of each market. As The Drive and Control Company, Bosch Rexroth develops, produces and markets components and systems in over 80 countries. As part of the Bosch Group, Bosch Rexroth and its 34,900 associates generated approximately 6.4 billion euros in revenue in 2011. To learn more, please visit www.boschrexroth.com

Products: Drive and Control products and system solutions Hydraulic System Turnkey Design and Supply

Address:

Phone:

Fax:

2 Cox Place, PLUMPTON, NSW 2761

02 8811 8000 02 9625 2757

Hydraulic Components Weld Free Prefabricated Tubing kits (GS Hydro) Large Hydraulic Drives (Hagglunds) Variable Speed Electric Drive Solutions Motion Control Technology and Automation Systems Mobile and Fixed Plant Electronic Systems Flame Proof Valve Technology.

32 • MESCA MEMBERS DIRECTORY VOL 8

When the going gets tough,

the TOUGH GET GOING

Every Bonfiglioli Heavy-Duty Drive undergoes workshop testing, ensuring your purpose built drive performs to perfection. A s a world wide leader in Industrial Power Transmission Gearboxes, Bonfiglioli is committed to enduring quality and excellence.

Advanced design technologies and a scrupulous attention to detail, place these units at the top of their class.

The HDO and its modular combinations, from the customised HD Drive Power Packs, to the smarter cost saving HD Alignment Free Drives, are perfect for tough, demanding industrial Mining, Quarrying and Bulk Handling applications.

All is supported by a dedicated Drive Service Centre, extensive local warehoused stock and a team of highly qualified technicians, safe-guarding product selection, CNC assembly and quality control.

BON ÂŠ BERLET #5725

Branches Australia Wide Ph 1300 656 757

w w w.bonfiglioli.com.au

MESCA SUPPLIERS Industry Buying Guide

New Products: The new Hägglunds CBM hydraulic motor from Bosch Rexroth creates powerful opportunities. Taking over from the tried-and-true Hägglunds Marathon motor, the Hägglunds CBM packs 50% more torque into a motor that is smaller and up to 50% lighter than its predecessor. That gives it the world’s highest torque-to-weight ratio. To learn more, please visit www.boschrexroth.com/cbm

Other Countries: The Bosch Group comprises Robert Bosch GmbH and more than 350 subsidiaries and regional companies in some 60 countries. If its sales and service partners are included, then Bosch is represented in roughly 150 countries.

BOSFA Pty Ltd Offices: WA Address:

Phone:

7 Bradford Street, KEWDALE, WA 6105

1300 665 755 08 9353 5296

Bramco Electronics About:

Specialisation: Bosch Rexroth is familiar with the requirements of various industries, offering customers tailor-made drive and control strategies for all your mobile and fixed plant equipment needs. Our solutions are uniquely designed to provide robust performance, high flexibility and long-term reliability in the most demanding environments. Our systems offer excellent torque and force control throughout the whole speed and velocity range, making it easy to optimise machinery and processes.

Website:

www.bosch.com, www.bosch-press.com Offices: QLD Address:

Phone:

104 Bluestone Circuit, SEVENTEEN MILE ROCKS, QLD 4073

07 3279 6122 07 3279 6255

Fax:

Bramco Electronics have designed, manufactured, and supported innovative electronic control, protection, monitoring, and safety products since 1945. We service energy distribution; electric power systems (including switchgear); short-haulage and long-distance conveyor control; industrial communications; and tailored, engineered electronic solutions. With key operations in Australia and South Africa, Bramco distributes its design services and products to South Africa, China, New Zealand, Turkey, Zambia, Canada, Ghana, Ukraine, USA, Brazil, Chile, Asia and the UK. Our products are suited to all environments including the extremes, focused towards mining (eg. Coal, Copper, Gold, Manganese) and general industry when monitoring, protection and safety services are paraMt. Bramco products also help maximise the efficiency and cost-effectiveness of your operation. Our highly innovative range of simple relay units, through to complex suites of electronics, are designed with your needs in mind.

Activity: Mining, Heavy Industry, Electronics, Conveyor Solutions, Protection Systems.

For plant in the middle of nowhere... you need reliability PIV Drives give you just that—for peace of mind. Available as both helical and bevel helical gear units from PIV Drives of Germany, part of the worldwide Brevini Power Transmissions Group. Brevini Australia supplies PIV gear units as stand alone gear units or complete drive packages: ● To all demanding speciﬁcations ● Fully engineered and documented ● Medium to large powers ● Wide range of drive conﬁgurations. Call NOW for details.

Brevini Planetary Samhydraulik VPS Brevini Brevini Winches

Fax:

Brevini Hydraulics Aron Hydrapp Pullmaster

Phone 1300 657 771

PIV Bevel Helical Emmegi PT Tech PIV Posiplan

Email sales@brevini.com.au

34 • MESCA MEMBERS DIRECTORY VOL 8

www.brevini.com.au

MESCA SUPPLIERS Industry Buying Guide

Products: Individual Electronic Protection Relays, Conveyor Control and Management Systems, Power Distribution and Motor Protection Systems, Safety Systems.

Activity:

New Products: b3 Range – Earth Leakage Relay (el3), Fascia Earth Leakage Relay (fel3), Earth Leakage Module (elf3), Earth Continuity Relay (ic3), Neutral Link Monitor (nlm3), Module Remote Interface (mri3).

Other Countries: South Africa, China, New Zealand, Turkey, Zambia, Canada, Ghana, Ukraine, USA, Brazil, Chile, Asia and the UK.

Specialisation: Our commitment to research and design is demonstrated in our ongoing product innovation and development. We typically commit over twenty per cent (20%) of turnover back into R&D. Our clients are our partners. They have the opportunity to participate in the design process and to provide that vital input to tailor the engineering quality of our products. We customise existing products or develop new ones to meet clients’ exact requirements. We do not impose standard, offthe-shelf, non-customised products on our clients. Our products become their design also.

Website:

• • • •

Offices: NSW Phone:

Fax:

2 & 3/2 02 4014 4444 02 4967 4100 Callistemon Close, WARABROOK, NSW 2310

Brevini Australia Pty Ltd About: At Brevini Australia, our company philosophy has always been inspired by a few, simple ideas: Ruggedness, Compactness and Strength. These terms relate strongly to the gear units produced by our company since the 1960s. From humble beginnings, we have grown into a worldwide manufacturer and marketer of over 500 different epicyclic final drives used in power transmission in most industries – from manufacturing to agriculture, transport to mining. Locally, our presence started in the 1970s from an agency arrangement to the established Australian company that it is today. From our head office and factory in Sydney, and branch offices in Melbourne, Brisbane and Perth, Brevini Australia covers the entire country through an extensive distribution network. As part of the long-term commitment to Australian industry, local content has been increasing continually as a matter of policy. The manufacture of shafting, housings and the use of local supplies of bearings and fabrications is part of that commitment. Today, we build gearboxes in Australia, keep stocks of gear modules and a variety of locally produced housings, shafting and bearings. We specialise in application of planetary gearboxes with hydraulic and AC drive technology to low-speed, high-torque equipment. Our reducers are also particularly suited to thickener, agitator, mixer, feeder conveyors, inching, long travel and slewing drives. Planetary gearing has the highest torque to weight ratio of any type. The gear units are robust, flexible in configuration and extremely simple to Mt, service or modify. As well as being competitively priced, our gear units are able to meet the demands of the most sophisticated as well as the simplest power transmission systems. These factors have helped Brevini reducers replace conventional parallel axis reducers in many applications. All our gear units are rated in accordance with ISO/DIN standards for

Planetary Gearboxes Industrial Planetary Gearboxes Mobile Helical Gearboxes Combination Gearboxes.

Winches • Brevini Winch Hoisting • Brevini Winch Recovery • Pullmaster •

Custom Winches.

Hydraulics • Pumps • Motors • Valves • Power Units (Modular) •

Power Units (Custom).

Ancillary Products •

www.bramco.com.au Address:

continuous duty and our Australian engineers are able to calculate application specific gear and bearings lives for all standard and special composition units.

Heat Exchangers.

Drives • Conveyor Drives • Long Travel Drives • Slew Drives •

Thickener Drives.

Other Products • Slew Ring Bearings • Clutches and Brakes • Winches • Shrink Discs •

Emmegi Heat Exchangers.

Products:

Gearboxes Planetary Gearboxes Industrial Planetary Gearboxes Mobile Helical Gearboxes Combination Gearboxes Winches Hydraulics Drives.

Website:

www.brevini.com.au Offices: NSW Address:

Phone:

149 Gilba Road, GIRRAWEEN, NSW 2145

02 8848 4000 02 9636 2700

Fax:

Brisbane Abrasive Blasting Offices: QLD Address:

Phone:

Bay 6, 451 Sherwood Road, SHERWOOD, QLD 4106

07 3278 6833 07 3278 6933

Fax:

MESCA MEMBERS DIRECTORY VOL 8 • 35

MESCA SUPPLIERS Industry Buying Guide

Bullivants Pty Ltd About: Bullivants helps industry to operate safely and efficiently by ensuring our customers’ materials handling and safety equipment is best practice, and is maintained in accordance with safety standards and regulations. We help our customers to manage workplace risk and improve operational efficiency. We provide a unique fully integrated solution – we manufacture, test, supply, install, inspect and repair lifting, rigging and safety equipment. Our people are experts in their field.

Activity: Manufacturer, Distributor of Lifting Equipment and Safety products. Also specialising in Safety systems including installations.

Products: Wire rope fibre rope chain and fittings slings hardware load restraint and recovery materials handling forklift attachments height safety and installed systems personal protection equipment Inspection, repair and testing services available on and off site of lifting equipment. Visual inspections of height safety installations.

New Products: Grade 100 lifting chain and fittings. Recoverfast Kevlar Tow Slings. Mining Ropes for Draglines and Shovels.

Website:

www.bullivants.com Offices: Head Office – QLD Address:

Phone:

Fax:

79 Colebard Street 07 3213 1601 07 3213 1699 West, ACACIA RIDGE, QLD 4110

Bundaberg Walkers Engineering Ltd About: Originally, Bundaberg Foundry was established in Bundaberg in 1888 with Walkers being established in 1869 in Maryborough. Following the acquisition of the Walkers Sugar Business in 2003, Bundaberg Foundry Engineers Ltd moved to change the operating name to Bundaberg Walkers Engineering Ltd in January 2008. This combination of iconic names ensures that industry expertise developed over the last century was not lost. It can now be said that Bundaberg Walkers Engineering Ltd has accumulated over 260 years experience in the engineering business.

Activity: Bundaberg Walkers Engineering Ltd is one of the larger manufacturing facilities located in Queensland and offers a high-quality competitive

327403A_Bulivants | 2065.indd 1

36 • MESCA MEMBERS DIRECTORY VOL 8

6/09/13 12:10 PM

MESCA SUPPLIERS Industry Buying Guide

option on heavy engineered products, such as pressure vessels, process and storage tanks, heavy structural steel work and other work typically associated with a heavy engineering workshop. With design and project management personnel, we can offer design, manufacture, supply and installation for a full turnkey package.

Products:

With an unrivalled global reputation, Bureau Veritas endlessly seeks to offer the best in quality and service for all clients. With over 50 offices across Australia and New Zealand, Bureau Veritas has over 2000 employees serving over 5000 customers.

Activity: Health, Safety and Environment

Engineering Design and Drafting

Industry

Project Management

Marine

Fabrication and Installation of heavy structural steelwork

International Trade (ITD)

Process and Pressure vessels

Certification.

Medium to large fabricated equipment We specialise in low to medium carbon and stainless steel, as well as speciality hard wearing materials commonly found in the mining industry

Consumer Products: Inspection and In-Service Verification

Large, Heavy to Medium Machining

Construction.

CNC Machining

Products:

Steel, Iron and brass castings. Bundaberg Walkers is one of the few jobbing foundries in Queensland that offers castings over 20 tonnes.

New Products:

Occupational Hygiene Services Environmental Assessment Services HSE Training

An additional MVR-40 Plano Mill, New 62” Swing CNC Poreba Lathe, and a new CNC Horizontal Boring and Milling Machine. Please refer to our company website for additional information.

Equipment:

Occupational Health / Medical Environmental Monitoring and Management Asset Integrity and Reliability Services (AIRS) Risk Management (IRC)

Office and Factory Area Office and Drawing Office – 700m2 Workshop under cover – 12470m2 Height under crane hook – various 4.0 to 8.5m Workshop in the open – 1 Ha Storage area under cover – 400m2 Storage area in the open – 2 Ha.

Specific Oil and Gas Validation Services

Specialisation:

Product Certification.

Medium to Heavy Fabrication Medium to Heavy Machining Specialised castings.

QA/QC Shop Inspection Services Transport and Logistics Bulk Commodities Certification (Superintending) Exploration and Borecore Services / Analysis Technical Support Services Management System Certification

Other Countries: North America; Latin America; Europe; Asia; Africa; Middle East.

Website:

www.bundabergwalkers.com.au

www.bureauveritas.com.au

Offices: QLD

Offices: Australian/Pacific Zone Head Office – VIC

Address:

Phone:

PO Box 12, BUNDABERG, QLD 4670

07 4150 8700 07 4150 8711

Fax:

Bureau Veritas Australia About: Since 1828, Bureau Veritas has grown and established itself as a worldleading professional services organisation providing Inspection, Auditing, Certification, Consultancy, Laboratory Testing and Conformity Assessment services globally. Applied in the areas of Quality, Health, Safety, Environment and Social Responsibility, Bureau Veritas specialises in servicing a diverse range of industry clients ranging from small to medium companies, to large international firms and government bodies. Operating throughout 140 countries with over 850 offices and laboratories, Bureau Veritas leads a global network of over 34,000 experienced professionals who provide exceptional service to over 300,000 clients across the world.

Address:

Phone:

Fax:

Unit 3, 435 Williamstown Road Floor 26, Colin Street, PORT MELBOURNE, VIC 3207

03 9922 0700

03 9922 0710

Cadden Crowe About: Cadden Crowe is an international recruitment consultancy with offices in Sydney, Brisbane, Melbourne, Perth and the Pacific. Our focus is local but our reach is global. Peerless expertise sets us apart. We specialise in both executive search and in a broad range of professional roles. We find the highest-calibre candidates – from graduate to top executive – for clients across a range of specialities across various functions and industries. We relish the challenge of bulk recruitment. We have years of experience in capital cities, regional and most remote locations. Our database is second to none, and we bring you key talent from across the globe for even the most difficult-to-fill positions.

MESCA MEMBERS DIRECTORY VOL 8 • 37

MESCA SUPPLIERS Industry Buying Guide

Our reputation is such that many candidates contact us. Cadden Crowe was acquired by the Rubicor Group, one of Australia’s largest and most diverse recruitment and staffing groups. Established in 2005, Rubicor represents the best – partnering with such a power base puts Cadden Crowe at the cutting edge of search and recruitment. Additionally, Cadden Crowe has a growing international presence with alliance partners in Indonesia, Papua New Guinea and New Caledonia.

Specialisation: The personal approach combined with unparalleled networking and databasing power, Cadden Crowe provides individually tailored contracting solutions and so much more. Executive Search We find the best, wherever they are. What sets us apart is our specialist expertise. Our background checks on potential candidates are thorough and discrete, and initial approaches are confidential. With Cadden Crowe, you tap into over a decade of experience in finding the perfect talent for your field, an unparalleled global network, and a database that is second to none. Integrated Search Systems Talent is in high demand and low supply. We find it by using state-of-the-art database techniques, advertising, networking and tracking down “hidden” talent – those elusive non-active job seekers. Database Search Cadden Crowe’s database of technical and management professionals is extensive. Our IT Recruitment Management System and Talent Management Program connect us with the best. Candidates are skillscoded and updated on career opportunities on a regular basis. Assessment Centres for Bulk Recruitment Our team is well-versed in creating Assessment Centres. These are tailored to requirement and managed by an experienced team of psychologists and HR professionals. The Selection Process Cadden Crowe uses a range of tools to match key candidates to your specific needs. Our processes are contemporary and behaviourally based. We validate behaviours from the first point of contact to post placement follow up. Psychometric Services We offer a thorough range of services depending on our clients’ needs. We have the ability to provide online, pen and paper, and assessment centre assessments, and are also able to provide French language assessment online.

Website:

www.caddencrowe.com.au Offices: VIC Address:

Phone:

Fax:

Level 3, 410 Lonsdale Street, MELBOURNE, VIC 3000

03 8506 2888 03 8506 2800

Caltex Australia About: Caltex is Australia’s leading transport fuel supplier and convenience retailer, and the only integrated oil refining and marketing company listed on the Australian Securities Exchange. Our business value chain incorporates supply, refining, logistics and marketing. We are committed to operational excellence at all levels. We strive for clean, safe, reliable operations for the benefit of our employees, contractors, franchisees, resellers and stakeholders alike. We operate in every state and territory of Australia.

Activity: Caltex Marketing encompasses a range of downstream activities from retail service station operations to equity and non-equity resellers, and direct sales to corporate customers. Caltex operates 12 storage terminals throughout Australia, complemented by access to product supply at a further 12 terminals. These 24 terminals are in key locations around Australia. Caltex delivers products to customers via its own truck fleet and the fleets of approved and accredited third-party contractors. Expanding and upgrading infrastructure capability has been a key strategy for Caltex with significant work being undertaken to strengthen the Caltex supply chain in vital growth areas. Projects such as the two additional diesel tanks in Mackay and Gladstone in Queensland, and the major expansion of the fuel terminal at Port Hedland in Western Australia will allow Caltex to add much-needed supply capability to provide diesel fuel to the growing resource industry. These projects are part of Caltex’s overall infrastructure improvement program and ongoing commitment to the Australian market. In addition to these projects, Caltex also undertook a number of terminal upgrades to enable the significant rollout. With two of Australia’s seven refineries, two large capacity coastal product tankers, and significant and growing terminal capacity, Caltex has a highquality and capable supply chain in Australia. It is the strength of this infrastructure that provides customers with convenient, safe and reliable supply, and makes Caltex a supplier of choice. Caltex will continue to build on and enhance the supply chain and remains committed to providing our customers with reliable, quality products and services, and our employees with a safe and secure working environment.

Products: Caltex markets a range of lubricants, specialty products, fuels and fuel cards for the Australian market. •

Lubricants: Delo® diesel engine oils, Havoline® petrol engine oils, HDAX® gas engine oils, Meropa® gear oils, Rando® hydraulic oils, Regal® turbine oils, Taro® marine oils, plus a full range of products covering the automotive, commercial, marine and industrial markets.

•

Specialty Products: Marine and aviation fuels, LPG and bitumen.

•

Bio Fuels: E-Flex, E10 Unleaded, Bio Diesel (B5 and B20).

•

Vortex Premium Fuels: Vortex® 98, Vortex® 95, Vortex® Diesel.

•

Fuel Cards: StarCard®, StarFleet®, StarFleetPlus, StarCard® Debit, StarCash®.

Website:

www.caltex.com.au Offices: Head Office – NSW

Calibre Global Pty Ltd Offices: QLD Address:

Phone:

GPO Box 5233, BRISBANE, QLD 4001

07 3001 6142 07 3001 6050

Fax:

38 • MESCA MEMBERS DIRECTORY VOL 8

Address:

Phone:

2 Market Street, SYDNEY, NSW 2000

02 9250 5000 02 9250 5742

Fax:

MESCA SUPPLIERS Industry Buying Guide

Carboline Coatings

Offices: QLD

About: In Australia and New Zealand, Altex Coatings has the exclusive licence to manufacture and distribute Carboline Coatings. Altex has over 55 years’ experience in the heavy-duty protective coatings market. An ISO 9001 registered company, Altex recently gained internationally recognised ISO 14001 accreditation.

Activity: Carboline offers a complete line of protective coatings for the mining industry. With extensive case histories and an established network of associates and certified professionals, Carboline has operations in over 90 countries, providing an extensive global service. And with products that have earned the reputation for proven performance at every level, Carboline is often recognised as the benchmark for high-performance in the protective coatings industry.

Products: Carboline’s flagship technologies and brands are as follows: Atmospheric protection coatings Carboline’s range of atmospheric protection coatings includes: Carbozinc, Carboguard, Carbomastic, Carbothane, Carboxane, Carbocrylic and Carbocoat. In the Zinc range, Carbozinc 11, a solvent-based inorganic primer, and Carbozinc 11WB, a self-curing water-based inorganic primer with zero VOC, are two solid time-tested performers both with high zinc loading for outstanding corrosion protection of steel substrates. Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide. Tank linings Carboline offers a comprehensive line of heavy-duty, chemically resistant tank linings for a wide variety of services. These include: Bitumastic, Phenoline, Plasite, Polyclad and Reactamine. High-temperature coatings Carboline manufactures high-temperature coatings, offering a range of heat-resistant primers and finishes for continuous exposure from ambient to 1,200°F. This product range includes Thermaline (under insulation, high heat exposure).

Address:

Phone:

PO Box 785, ASHMORE CITY, QLD 4214

07 5512 6602 07 5594 9093

Fax:

Cattani Consulting About: Cattani Consulting are a team of HSE and Operational Management Consultants, Technical Staff, Facilitators and Coaches. Coupled with our innovative safety design strategies and leadership programs, we will guide you on your journey to measurable and lasting results in safety and overall business performance. As founding members of the Safety Collective™, our services are one of the most comprehensive in the market with extensions into Environ. Monitoring, Corporate Health, Training, Emergency, Corporate Psychology and Safety Management Software. We are a professional, flexible and adaptable team who understands the pressures for HSE performance in the Mining, Oil, Gas, Manufacturing, Construction and Logistics industries. Our vision is to be the provider of first choice in: •

Safety Design, Innovation and Consultancy

•

HSE Expertise for Long and Short Contract

•

Leadership Programs, Training and Integration.

Activity: Our approach is first and foremost one of sustainability – financially and in methodology. We won’t leave you stranded with tools and solutions that sit on a shelf, that your people don’t understand or that your company’s resources cannot maintain. We work with our clients to design and implement robust safety systems to improve and sustain performance with a critical focus on people. Each system, model, framework or prescribed solution is derived from a blend of experience, qualification, research and collaboration. Each product we develop equally draws from this insight and is delivered with the same level of appreciation for its end user and industry as a whole.

Secondary containment coatings

•

Safety Design and Assessment – systems and behaviour

Carboline manufactures a wide variety of high-performance, chemically resistant products that are suitable for light to extreme heavy-duty applications for concrete protection in abusive environments. This range of secondary containment coatings includes Carboline’s Semstone concrete systems, which are engineered systems with broad chemical resistance.

•

HSE and Occupational Hygiene Consultancy

•

Operational Management Consultancy

•

Risk Management

•

Auditing

Fireproofing coatings

•

Integrated Management Systems

Carboline’s range of fireproofing coatings includes Pyrolite, Pyrocrete, Thermo-Lag and Thermo-Sorb.

•

Accident Investigations

•

Noise Surveys, Dust Monitoring and Environmental Monitoring

Thermo-Lag (intumescent fireproofing), a solvent-based, single-component thin coating, is applied by normal airless spray to give up to two hours of fire protection on all types of steel sections. It is suitable for internal and external steelwork.

•

HSE and Operational Management Personnel for short and long contract

•

Organisational Behaviour

•

Leadership Development Programs The JOURNEYProgram™ and myJOURNEY™

Global provider of protective coatings and associated services.

•

Leadership training – non-accredited

Globally, and locally in Australia and New Zealand, Carboline and its associates offer a full custom specification service, as well as corrosion audits relating to protective coatings.

•

Nationally Accredited Training

•

OSH Training

•

Workshops, Coaching and Mentoring.

Other Countries:

Website:

Products:

www.altexcoatings.com

The JOURNEY Program™ is an essential guide for leaders at all levels – from Executives, Frontline Supervisors, Safety Advisers, to Team Members – and provides a series of business and leadership tools to manage injury risk, a method to communicate it, and a feedback system to assess and respond to performance. It is an innovative, practical, “common sense” approach that will change the way your people handle teamwork, safety and risk. The JOURNEY Program™ has three integrated components:

MESCA MEMBERS DIRECTORY VOL 8 • 39

MESCA SUPPLIERS Industry Buying Guide

•

The Journey Book – gives participants useful skills, knowledge and tools via text, illustrations and practical exercises to enable them to improve the management of their team and level of risk in their workplace.

Radio remote controls. Industrial controllers. Festoon systems. Rail clips and pad. Power and control flexible cables. Electrical plugs and sockets. Slipring columns. Panzerbelt cable protection systems. Aircraft towbars. Airport above and underground supply systems. Aircraft connectors.

•

Workshops and Coaching – tailored programs to embed the leadership tools delivered on your site. We can give your trainers and coaches the skills to deliver the program or let us train and coach your people.

Website:

•

myJOURNEY™ – an online performance management system that lets participants and their supervisors monitor performance and its effect on managing injury risk.

www.cavotec.com Offices: QLD

The elements of the program are customised for your organisation’s needs, scheduling and budget, and can include components or the entire offering. In partnership with a well-known and respected Registered Training Organisation, we can provide a pathway for your leaders to progress from the professional development course to nationally recognised training and education.

Other Countries:

Address:

Phone:

3, 220 Beverley Street, MORNINGSIDE, QLD 4170

07 3908 9788 07 3395 8871

Fax:

Thailand.

CBC Australia Pty Ltd

Specialisation:

About:

Safety, Leadership Programs and Training.

Established in 1954, CBC Australia Pty Ltd has grown to be the largest distributor of bearing, power transmission and engineered solutions and services in Australia.

Website:

www.journeyprogram.com.au Offices: WA Address:

Phone:

PO Box 1611, MELVILLE SOUTH, WA 6156

08 6270 6357

CBC has a long history of successfully engaging with and supporting the mining sector. As a result, the company now offers a dedicated mining division called CBC Mining and Resources. The company offers customers the convenience of a simplified, all-in-one source for total bearing, power transmission and engineered solutions and services from a single national supplier to improve uptime and productivity to the mining industry. No other supplier can match CBC’s capacity in: •

Complete drive systems and components

Cavotec Australia Pty Ltd

•

Extensive Australasian branch and distributor network

•

Engineered product and application solutions

About:

•

Distributors of premium brands at the forefront of product development

•

Outstanding industry track record

•

Assurance of stock availability

•

24/7 Service

•

Rapid delivery to secure your company’s productivity.

Cavotec is a multinational group of companies serving the following industries: mining and tunnelling, ports and maritime, steel and aluminium, energy and offshore, general industry and automation. In the early 1960s, our main focus was the design and production of motorised cable reels primarily for manufacturers of tower cranes, harbour cranes and mining equipment. Today, Cavotec is connecting mobile equipment around the world in many diverse applications.

Products: Cavotec Australia has been designing and supplying cable and hose handling systems for Australian mining, port, steel and manufacturing industries for over three decades. Being Australian-based gives Cavotec Australia a strong understanding of the unique requirements of Australian conditions. As specialists in electrical power feed systems, Cavotec Australia can provide excellent service to port and harbour operations, as well as to electrical and mechanical businesses nationwide. With the resources of the Cavotec Group of companies behind it, Cavotec Australia is acknowledged as being a strong and viable partner to industry.

New Products: Automated Mooring Systems Automating the mooring process represents an entirely new field of marine technology. The Cavotec MoorMaster has captured all of the flexibility and characteristics of traditional mooring lines while using vacuum instead of rope to fasten the ship to the quay.

Other Countries: Over 30 countries on 5 continents.

Specialisation: Motor-driven cable and hose reels. Spring-driven cable and hose reels. Alternative maritime power supply. Nylon, steel and power cable chains.

40 • MESCA MEMBERS DIRECTORY VOL 8

Activity: CBC Australia Pty Ltd is the foundation company of The Inenco Group. From a market standpoint, the Inenco Group of companies sit apart from comparative competitors because of collective technical knowhow combined with customer centricity. As a result, The Inenco Groups customer base is deep, extensive and solid. The Inenco Group’s core product lines embrace bearings, power transmission, sealing, fasteners, driveshafts, drives and motors, belting, fluid power, engineering services, lifting and safety equipment, tools, and maintenance products. Adding in extensions and related products, the number of stocked lines exceeds 350,000 – equating to a presence in almost all industrial and trade sectors from agriculture and automotive to mining and transport in Australia. The Inenco Group employ around 1500 people across more than 25 companies, with over 160 branches providing local service where and when it’s needed.

Products: Bearings • Ball and Roller Bearings • Spherical Roller Bearings • Tapered Roller Bearings • Needle Roller Bearings • Wide Inner Ring Bearings • Split and Solid Bearing Housings

MESCA SUPPLIERS Industry Buying Guide

• •

New Products:

Linear Motion Bearings Slew Ring Bearings.

Power Transmission • Gear Motors and Gear Reducers • Engineered Couplings, Spindles and Guards • Fluid Couplings • Shaft Hub Connections • Industrial caliper, drum and disc brakes • Electric motors and controls • Heavy-duty clutches and brakes.

MACHINED BASE REMEDIATION (MBR) correcting base alignment for conveyor pulley housings CBC Australia has developed a specialised and efficient MBR procedure which corrects: • bases that are not to IT7 • bases that are not co-planar • bases that are not aligned to the conveyor centreline. MBR will correct any or all of these conditions with a single procedure. It takes just 5 hours, plus up to 6 hours grout drying time (temperature dependant). The procedure is carried out without machining, hot work or site power.

Other • Cam Followers • Oil Seals (Custom and Standard) • Industrial Adhesives/ Loctite/ Devcon • Lubricants; Loctite, Rocol and CRC • Industrial Universal Joints • Simple Green • Circlips • O-Rings – Shim.

Website:

www.conbear.com Offices: QLD

Engineered solutions and services Engineered clutch and brake products: • Specialised Condition Monitoring programs • Heavy-duty Bearings • Wire rope sheaves for conveyor gravity take-ups • Bearing housings • Magnetic Filtration • Bolt Tensioning • Complete shaft sealing package • Root Cause Analysis • Innovation in design – CBC Design Centre • Tailored maintenance training modules • Dragline shutdown management programs.

Address:

Phone:

PO Box 1387, EAGLE FARM, QLD 4009

07 3866 2100 07 3866 2177

Fax:

CBI Constructors Pty Ltd About: CB&I (NYSE: CBI) is the most complete energy infrastructure focused company in the world and a major provider of government services. Drawing upon more than a century of experience and the expertise of approximately 50,000 employees, CB&I provides reliable solutions while maintaining a relentless focus on safety and an uncompromising standard of quality. As one of the most complete providers of a wide range of services, including design, engineering, construction, fabrication, maintenance and environmental services, no project is too big for CB&I. Our timely and costeffective solutions not only satisfy our customers’ needs, but also improve the quality of life for people around the world.

Activity: CB&I designs, engineers and constructs some of the world’s largest energy infrastructure projects, providing a full spectrum of EPC solutions and proven process technologies, as well as a comprehensive package of aftermarket services. In the energy sector, we focus on the upstream oil and gas, downstream oil and gas, LNG and power markets. In addition, we provide environmental protection and remediation services for government and commercial clients worldwide. And we design and construct infrastructure and civil works projects for government and private-sector clients. CB&I also serves clients in the natural resources sector. We have delivered superior value and reliability to the water and wastewater industry for more than a century, and we provide comprehensive EPC services to clients in the metals and mining industry.

Products: From proprietary technologies to innovative construction techniques, CB&I is the most complete energy infrastructure focused company in the world and a major provider of government services. With our vertically integrated business structure, CB&I can design and engineer an oil and gas, mining or power generation facility, fabricate required piping systems, procure all other necessary services and components, provide stickbuilt and modular construction, and deliver aftermarket services. In addition to our leading EPC services, CB&I has worked on thousands of design-build projects for government and industrial facilities worldwide.

Other Countries: Regions: Africa; Asia; Australia; Canada; Central and South America; Europe; Middle East; the United States of America.

42 • |MESCA 326326A_CB&I 2065.indd MEMBERS 1

DIRECTORY VOL 8

4/12/13 10:38 AM

MESCA SUPPLIERS Industry Buying Guide

Specialisation: CB&I is organised into four business groups that serve the needs of our clients in the energy and government markets.

Mine Spec Solar Trailers and Power Skids (Self-supporting Solar based power plant) VSAT Trailers.

•

Our Technology group offers licensed process technologies, catalysts, specialised equipment and engineered products for use in petrochemical facilities, oil refineries and gas processing plants.

CBO is a Cisco Premier Partner, a Cambium Networks Platinum Partner and an Australian Distributor for Will-Burt pneumatic and telescoping masts, ITS towers and GEROH mast systems.

•

Our Engineering, Construction & Maintenance group provides engineering, procurement, fabrication and construction of major energy infrastructure facilities, as well as comprehensive and integrated maintenance services.

Website:

•

CB&I’s Fabrication Services group is a leading provider of piping solutions and the world’s leading supplier of storage tanks and vessels for the oil and gas, water and wastewater, mining and power generation industries. Our Government Solutions group leads large, high-profile programs and projects – including design-build infrastructure projects – for Federal, State and Local Governments.

Website:

www.cbo.net.au Offices: Head Office – QLD Address:

Phone:

1/76 Buchanan Road, BANYO, QLD 4014

1300 226 638 07 3262 6486

Fax:

www.cbi.com

CCG Cable Terminations Pty Ltd

Offices: WA

Products:

Address:

Phone:

Level 13, 197 St Georges Terrace, PERTH, WA 6000

08 9324 5555 08 9322 8205

Fax:

CBO Telecommunications About: CBO Telecommunications specialises in designing and implementing end-to-end connectivity solutions in challenging environments. We work closely with many organisations across Australia, specialising in the design and implementation of wireless technologies, including indoor WLAN and outdoor Mesh networks, licensed and unlicensed point to point and point to multi point microwave and WiMax links, long range wireless solutions using carrier-grade licensed terrestrial microwave systems and the design and construction of Telecommunications infrastructure. We also design and manufacture mobility solutions including The Edge – Solar Mobility Trailer, The Edge – VSAT Trailer and The Edge – 33m Communications Skid that enable wireless technology to be utilised in remote and temporary locations.

Activity: At CBO, we have a long history servicing the Mining and Resources and Oil and Gas industry. We have designed and implemented reliable and robust wireless solutions that have enabled our clients to increase productivity, effiency and safety whilst reducing costs.

Products: The Edge – Solar Mobility Trailers, The Edge – VSAT Trailer and The Edge – 33m Communications Skid.

Specialisation: CBO designs and builds: Point to Point Microwave Links – Licensed Point to Point Microwave Links – Unlicensed Point to Multi Point Microwave Links (including WiMAX) Mesh Networks RF and Wi-fi Site Surveys Satellite Systems – VSAT and BGAN Design and construction of Telecommunications infrastructure (Lattice Towers and Guyed Mast Solutions)

Electrical Cable Glands Electrical Junction Boxes Cable Cleats Trefoil Clamps.

Website:

www.ccgcableglands.com.au Offices: QLD Address:

Phone:

7/72 Crocodile Crescent, MOUNT ST JOHN, QLD 4818

07 4774 4551 07 4774 3642

Fax:

Century Yuasa Batteries Pty Ltd Offices: QLD Address:

Phone:

PO Box 427, GOODNA, QLD 4300

07 3361 6161 07 3361 6160

Fax:

CH2M HILL About: CH2M HILL has been conducting business in Australia and New Zealand since 1990. With around 350 employees in the region and offices in Sydney, Melbourne, Brisbane, and Perth, we offer a broad range of capabilities, relationships, and experience. Headquartered in USA, CH2M HILL is a global leader in consulting, design, design-build, operations, and program management for government, civil, industrial and energy clients. The firm’s work is concentrated in the areas of energy, environmental, facilities, resources, transportation and water. With US$7 billion in revenue and 28,000 employees, CH2M HILL is an industry-leading program management, construction management and design firm, as ranked by Engineering News-Record and named a leader in sustainable engineering and environmental services by Verdantix.

MESCA MEMBERS DIRECTORY VOL 8 • 43

MESCA SUPPLIERS Industry Buying Guide

In November 2011, we acquired Halcrow. Internationally known and admired for the technical excellence of its engineering and its innovative approach to problem-solving, this awardwinning company is now part of CH2M HILL – so we’re proud to offer an extended depth of experience and expertise to our clients.

Activity: CH2M HILL provides consulting, design, EPC, and program management services for mining, resource, gas, and associated infrastructure projects throughout the world. In Australia, our mining and resources team is focused on supporting our clients in the design, development and delivery of the civil infrastructure required to support new mining developments as well as expansion and upgrade of existing mines, from facilities at the pit, along conveyance systems, roads, rail, right through to port quayside. As an integrated service provider, our clients rely on us for expertise in: Civil work – roads, geometric layout, geotechnical, earthworks and pavement Non-process infrastructure – bridges and tunnels Ports and maritime – coastal assessment, port infrastructure and maritime assessment Rail – traction, rolling stock, permanent way alignment, communications and signalling

This also allows us to deliver our outstanding safety, reporting and recruitment services directly into your business on a daily basis.

Products: Temporary Staff – for peak periods, replacements and special projects/ shutdowns. Permanent Staff – utilising a specialised permanent recruitment process to find the ‘best fit’ staff for your business. Customised Personnel Services – a tailored program for client’s unique circumstances eg. specialised recruitment. On-site Administration – provision of an on-site coordinator handling personnel admin activities at the client’s site – resource allocation, payroll, attendance. Workforce Supervision – responsible for work performance, assessments, support services (OH&S, EEO, Quality). Managed Service/Outsourcing – assuming increased or total responsibility for national sourcing of personnel for delivering a product or service to the client through managing the workforce activities on behalf of the client.

New Products: JOB CLASSIFICATIONS •

Mobile Plant Fitters

•

Maintenance Planners and Supervisors

•

Maintenance Electricians

•

Drill and Blast Crews

•

Boilermaker & Welders

•

Field Assistants

•

Mobile Plant Operators

•

Warehouse and Supply officers

Worldwide – North, Central and South America; UK and Europe; Middle East and North Africa; India; China; South-East Asia; New Zealand.

•

Mechanical Fitters

•

Laboratory technicians

Website:

•

Trades Assistants

www.ch2m.com/corporate/worldwide/ australia.asp

•

Process technicians

•

Drivers

•

Mill and Crusher operators.

Environmental – review and planning Water management – drainage, hydrology, hydrogeology, surface water design Asset management – systems review and advice Power generation.

Other Countries:

Offices: Head Office – NSW Address:

Phone:

Fax:

Level 7, 9 Help Street, CHATSWOOD, NSW 2067

02 9950 0200

02 9950 0600

Chandler McLeod

Website:

www.readyworkforce.com.au Offices: QLD Address:

Phone:

Fax:

2072 Logan Road, 07 3291 5415 07 3343 6215 UPPER MOUNT GRAVATT, QLD 4122

Activity: Welcome to Ready Workforce. As a preferred supplier for many of the industry’s most renowned and successful organisations, Ready Workforce is a well-known name in the Mining and Resources Industry. We have been servicing some of the top mining companies in Australia for over 25 years, and understand the unique and challenging requirements that face the mining industry. With over 14,000 on-hire staff including a range of tradespeople, skilled and semi-skilled workers, Ready Workforce specialist consultants can source the right workers for your business. Our experienced on-hire employees are ready to mobilise at minimal notice for short- to long-term projects, enabling greater productivity for your business. As part of our extensive branch network, Ready Workforce has offices located in regional mining areas, close to our clients, with an on-site presence in most cases. Our local presence means that we understand the changing needs of our clients, enabling us to form strong working partnerships and react immediately to your requirements.

44 • MESCA MEMBERS DIRECTORY VOL 8

Civil Mining & Construction Pty Ltd About: CMC Group The Civil Mining and Construction Group (CMC Group) has come from humble beginnings in regional Queensland to where it is today: a leading civil and construction services provider. We have stayed true to our family-owned heritage with a very real focus on family culture within our business, and a focus on forming and maintaining strong, positive relationships with our clients and our stakeholders. As a wholly Queensland-owned business, we pride ourselves on our local know-how and local focus. Whether in regional or metropolitan areas of Queensland, we engage local suppliers and support local communities. Our corporate culture is one of excellence in delivery – the highest quality infrastructure, a “zero harm” safety focus, best practice environmental

MESCA SUPPLIERS Industry Buying Guide

management, working with our stakeholders and communities, and delivering real value for money. The value we place on people and relationships extends from our employees and our development programs, through to our clients and our unique ability to collaborate and deliver outstanding project outcomes, whatever the contracting delivery form. We have a strong, positive track record in hard dollar, design and construct, alliance, joint venture, early tenderer or contractor involvement contracts with a genuine commitment to understanding our clients’ needs and exceeding expectations.

CIVMEC Construction & Engineering Pty Ltd Offices: WA Address:

Phone:

16 Nautical Drive, HENDERSON, WA 6166

08 9437 6288 08 9437 6388

Fax:

The CMC Group offers a broad range of services, including civil, mining, construction and infrastructure capabilities (CMC), an extensive plant and equipment capability (CMC Plant Hire), a strong asset base (CMC Property) and our quarry operations (QMQ). These in-house capabilities enable us to use our own people and plant to deliver critical project activities – offering a true competitive edge and real cost savings to our clients.

CNW Electrical & Data Supplies

The future for CMC is an exciting one of continued growth into new regions and delivering larger, more complex projects with exceptional results.

About: CNW Electrical and Data Supplies (established in 1952) is an Australianowned and managed company concentrating on service to our industry partners. Since 2001, the company has expanded to become a truly national entity, with 50 branches in all states. CNW is focused on “Total Value Supply.”

Website:

www.cmc.net.au Offices: QLD Address:

Phone:

Fax:

21 Lavarack Avenue, EAGLE FARM, QLD 4009

07 3212 5000

07 3212 5001

Activity: The Supply of Electrical Consumables, Installation Material and Electrical Cables to the Mining, Industrial and Commercial Electrical and Data Installers.

Products: Electrical consumables, lighting, electrical cable, switchboards and switchgear, hazardous area electrical products, motors, personal protective equipment, CCTV and access control.

Civmec is an integrated, multi-disciplined construction and engineering services provider to the resources and infrastructure sectors Civmec provides heavy engineering and other services including modular assembly, precast concrete, site civil works, industrial insulation, SMP, insulation, offshore logistics & maintenance services. Civmec’s headquarters and state of the art waterfront facilities are located in the Australian Marine Complex in Henderson, Western Australia. With our diverse capabilities, resources & experience we can deliver projects anywhere within Australia.

OIL & GAS | RESOURCES | ASSET MANAGETMENT & INTREGRATED SERVICES

325699A_Civmec | 2065.indd 1

www.civmec.com.au

21/11/13 1:21 PM

MESCA MEMBERS DIRECTORY VOL 8 • 45

MESCA SUPPLIERS Industry Buying Guide

New Products:

Website:

Remote circuit breaker racking, cable sealing compound, LED lighting, Arc flash clothing, mobile laundries.

www.coateshire.com.au Offices: QLD

Specialisation: Supply Contracts and FPAs, mining and industrial projects of all sizes

Website:

www.cnw.com.au Offices: Head Office – QLD Address:

Phone:

PO Box 174, BULIMBA, QLD 4171

07 3907 8388 07 3890 0927

Fax:

Coates Hire About: Coates Hire Limited is Australia’s largest hire equipment company with over 116 years’ experience in industry, supplying to a wide variety of markets. With over 130 branch and satellite locations across the country, and our own maintenance and transport capability, Coates Hire is well positioned to satisfy the equipment hire needs of an ever-increasing customer base.

Activity: Coates Hire – supplier of products and services associated with the hire of equipment. Including Engineering, Building Construction and Maintenance, Mining and Resources, Manufacturing, Government, Events, Oil and Gas, and Industrial Services.

Products: Coates Hire provides a wide range of earthmoving and compaction, access equipment, lighting and power, pumps and shoring, traffic management, materials handling, portable buildings and toilets, lift, shift and propping equipment. Coates Hire also provides event, training and industrial maintenance services backed by teams of dedicated equipment specialists.

New Products: Coates Hire supplies and maintains a range of Reverse Osmosis Desalination equipment that can produce any quantity of scheme, brackish or sea water into pure drinking water. For more information contact us through our Website: www.coateshire.com.au or phone 13 15 52.

Other Countries: UK, Indonesia.

Specialisation: Equipment Hire Experts in: Access and Materials Handling General Hire Earthmoving and Compaction Traffic Pumps and Shoring (Grounds) Portable Buildings and Toilets Lighting and Power Lift, Shift and Propping

Services: Events, Training, Industrial Maintenance.

46 • MESCA MEMBERS DIRECTORY VOL 8

Address:

Phone:

55-61 Meakin Road, MEADOWBROOK, QLD 4131

07 3299 9700 07 3299 9750

Fax:

Conductix-Wampfler About: Previously named Insul-8 and now incorporating Wampfler. Part of the worldwide Delachaux group in operation for over 100 years. Have been designing and manufacturing in Australia for over 40 years. Most respected supplier of these products in Australia and in many parts of the world.

Activity: Design and manufacture of Power and Data Transfer solutions.

Products: Conductor bars, Cable festoon systems, Cable and hose reels, Slip rings, Kabelschlepp energy cable chain, Push button pendants, Radio controls, Flexible cable, Industrial buffers, Kiepe conveyor monitoring equipment, UEE high-voltage couplers.

Website:

www.conductix.com.au Offices: QLD Address:

Phone:

45 Millenium Place, TINGALPA, QLD 4173

07 3902 6000 07 3902 6001

Fax:

ConSep Pty Ltd Offices: NSW Address:

Phone:

PO Box 6625, WETHERILL PARK, NSW 1851

02 9756 5299 02 9756 5102

Fax:

Control Logic Pty Ltd Offices: QLD Address:

Phone:

25 Lavarack Avenue, EAGLE FARM, QLD 4009

07 3623 1212 07 3623 1211

Fax:

MESCA SUPPLIERS Industry Buying Guide

Cooper Fluid Systems About: Cooper Fluid Systems, a division of Coventry Group Ltd, is a specialist provider of hydraulic, pneumatic, fluid transfer and lubrication products and services with a proud history of servicing the mining, construction and manufacturing industries. The Cooper Fluid Systems branch network stretches throughout Australia, stocking and providing an extensive and diverse range of products and services.

Activity: Supply, design, specify, manufacture, install and repair autolube, refuelling, liquid dispensing, filtration and hydraulic equipment and systems, lube service trucks, hose-reel stands and custom-designed vehicles and equipment for the mining and associated industries.

Products: ‘CooperBuilt’ custom-designed Fuel, Lube, Service and Special Concept trucks, Lube containers, Power-rewind hose-reels and stands, Dragline lubrication solutions, Pony drives, electro-hydraulic rail-switching power units; ‘Wiggins’ diesel refuelling systems and fluid connectors; ‘Lincoln’ and ‘Graco’ grease and oil pumps, ‘Eaton’ hydraulic pumps, motors, valves and cylinders, ‘Aeroquip’ hose and fittings, ‘Enerpac’ high-force hydraulic cylinders, pumps and torque wrenches, ‘RAD’ pneumatic torque tools.

New Products: •

Wiggins 800 LPM Ultra-Safe Auto Shut-off Diesel Refuelling Systems and Nozzles

•

Bolt-on Fail-Shut 1,200 LPM Wiggins VR300 Diesel Refuelling Kits for Large Dump Trucks and Excavators.

Equipment: All branch locations are equipped with modern and efficient warehouses, workshops and service vans.

Specialisation: ‘CooperBuilt’ custom-designed Fuel, Lube, Service and Special Concept trucks, Lube containers, Power-rewind hose-reels and stands, Dragline lubrication solutions, Pony drives, electro-hydraulic rail-switching power units; ‘Wiggins’ diesel refuelling systems and fluid connectors; Supply and installation of Wiggins refuelling and vehicle servicing systems; Auto-lube, dispensing and fire-protection systems for mobile mining equipment; Equipment for Mine service/fuel/lube trucks and service bays.

Website:

www.cooperfluidsystems.com.au Offices: National Head Office – QLD Address:

Phone:

Fax:

152 Cobalt Street, 07 3258 7228 07 3258 7200 CAROLE PARK, QLD 4300

Corestaff Offices: QLD Address:

Phone:

Shop 3/9 Miles Street, MOUNT ISA, QLD 4825

07 4437 3100 07 4743 0052

Fax:

MESCA MEMBERS DIRECTORY VOL 8 • 47

MESCA SUPPLIERS Industry Buying Guide

Corporate Protection Australia Group Pty Ltd About: The Corporate Protection Australia Group Pty Ltd (CPA Group) is a dynamic and specialist protection organisation. We provide premium corporate (human and asset) protection solutions to the mining, maritime and critical infrastructure industries. The CPA Group comprises of a number of specialist subsidiaries, including: Corporate Protection Australia Pty Ltd (CPA) – CPA is a major supplier of security/asset protection officers, maritime security guards and emergency service officers to the mining, maritime and critical infrastructure industries. Corporate Protection Australia Infrastructure Pty Ltd (CPAI) – CPAI specialise in the writing, auditing and delivery of general advice and services for all manner of security concepts and detailed and effective maritime security plans. These include vulnerability and risk assessments, training, manpower, systems, MTOFSA-related compliance and the provision of solutions across a range of operational security management issues. Corporate Protection Australia Medical Pty Ltd (CPAM) – Innovation, technology and experience underpin our approach to protecting life and property. We provide suitably certified paramedics, equipment, vehicles and clinical infrastructure for a complete site emergency solution. Corporate Protection Australia Fire and Rescue Pty Ltd (CPAFR) – To complement our medical capabilities, we also specialise in fire rescue emergency management. Our expert fire officers, equipment and vehicles ensure total site compliance and safety. Corporate Protection Australia Training Pty Ltd (CPAT) – CPAT delivers specialised education and training relevant to the maritime, mining and security industries. Education and training services include, but are not limited to, maritime and general security, breath alcohol and drug testing certification, specialist rescue qualifications, applied and advanced first aid and LVR rescue education and training. iSafe Safety management Systems (iSafe) – iSafe provides safety and risk management consultancy services within specialised environments. These include drug and alcohol testing, supply of specialised medical and rescue equipment, safety management planning and auditing, speed monitoring and education programs. iSafe also installs and maintains security reated systems; from CCTV systems, access control systems, contractor management systems to GPS asset and personnel tracking systems and more.

Activity: Incitec Pivot, Project Aurora, Ammonium Nitrate Plant Supply of security and paramedical personnel to construction-site and accommodation village. Supply of site security vehicles, drug and alcohol testing. Gladstone Ports Corporation Supply of maritime security personnel, access control, site security vehicles, consultancy, maritime security plans, risk assessments, security cameras and systems, site patrols and training. Xstrata Coal, Collinsville Industrial Dispute Management Secured site, asset protection, crowd management, liaison with company legal and IR team, surveillance of picket line, collection of evidence and identification of individuals, liaison with local police. Dalrymple Bay Coal Terminal Supply of maritime security personnel, speed monitoring, site security vehicles, training and consultancy. Port of Brisbane Limited Supply of maritime security personnel, access control, site security vehicles, consultancy, maritime security plans, risk assessments, security cameras and systems, and training. BHP Billiton Yabulu Extension Supply of security personnel, site security patrols, CCTV monitoring, site inductions, breath alcohol testing, occupational first aiders, emergency response.

48 • MESCA MEMBERS DIRECTORY VOL 8

Queensland Nickel Yabulu Refinery 2007–2010 (Security was taken in-house by the new owners) Supply of security personnel site security patrols, CCTV monitoring, rehab coordination and return to work occupational first aiders, emergency response coordinator, risk assessments, training. Rio Tinto Alcan Aluminium Refinery and Accommodation Villages Supply of security personnel to construction-site and accommodation villages. Supply of site security vehicles, site security patrols. Rio Tinto Kestrel Mine Expansion Project Supply of security and paramedical personnel. Supply of site security, supply of site security vehicles and ambulance, drug and alcohol testing, site inductions.

Products: Labour, supply of security, paramedic, fire and rescue personnel Project management Safety, including equipment Risk Management Education and Training Industrial dispute management Consultancy.

Equipment: Patrol Vehicles (dual cab 4wd utilities with and without ROPS Ambulance (4wd and 2wd) Fire Tenders Fast Attack (fire) Vehicles (4wd).

Other Countries: New Zealand, Indonesia, Papua New Guinea, Bougainville and South-East Asia.

Specialisation: Total asset and personnel protection for mining, maritime, oil, gas, energy and other critical infrastructure industries.

Website:

www.cpagroup.com.au Offices: QLD Address:

Phone:

11/120 1300 669 144 Goondoon Street, GLADSTONE, QLD 4680

Coventry Fasteners Offices: QLD Address:

Phone:

660 Macarthur Avenue, EAGLE FARM, QLD 4009

07 3291 8200 07 3291 8255

Fax:

MESCA SUPPLIERS Industry Buying Guide

Critical Logistics Pty Ltd

New Products: Industrial Strength Fibre-optic Ethernet Switches.

Offices: QLD Address:

Phone:

8 McCulloch Street, MACKAY, QLD 4741

07 4957 6211 07 4957 2151

Website:

Fax:

www.cse-uniserve.com.au Offices: NSW Address:

Phone:

Fax:

PO Box 6166, 02 8853 4200 02 8853 4260 BAULKHAM HILLS, NSW 2153

CSE Uniserve Pty Ltd About:

CSIRO Exploration & Mining

CSE-Uniserve’s capability is reinforced by its parent company, CSE-Global, located in over 24 offices in 16 countries. They provide, state-of-theart, cost-effective, total integrated industrial automation, information technology and telecommunication solutions to their clients globally.

Activity: Australian R&D supporting Australian business CSIRO seeks to work with all aspects of the resources value chain to help raise Australia’s competitive advantage in this vital, global industry.

Activity: CSE-Uniserve specialises in the supply and support of high-quality electrical engineering products, such as protection and control, communications equipment as well as motor starting and speed control equipment and solutions to the heavy industrial (mining and minerals), energy (oil and gas, power), water and sewerage and chemical / petro chemical sectors.

Products: World-leading R&D CSIRO researchers are breaking new ground throughout the minerals value chain. We are developing new methods and technologies in exploration, automation, robotics, communication, hard rock and coal mining, clean coal, energy mineral processing light metals and sustainability.

Products: Protection Relays, Communication systems, RTUs, Variable Speed Drives, Soft Starters, Secondary Resistance Starters, High-Voltage Motors, Slip Energy Recovery Drives.

Knowledge transfer and commercialisation To benefit Australia’s resources industry, we’re looking for innovative companies to help us move our latest developments from the lab to the market place. If you would like to build your business while also building Australia’s global competitiveness, contact us now.

Australian R&D supporting Australian business CSIRO is looking for enterprises in the resources supply sector to work with us to help raise Australia’s competitive advantage in this vital, global industry.

World leading R&D supporting Australian businesses CSIRO is seeking to work with Australian enterprises in this vital, global industry to help raise their competitive advantage via innovation and technology that delivers increased business performance.

Globally competitive R&D

Knowledge transfer & commercialisation

To benefit Australia’s resources industry, we’re looking for CSIRO researchers are breaking innovative companies to new ground throughout the access our capabilities and minerals value chain. We are research results to develop developing new technologies and/or commercialise new in minerals exploration, technologies in the Australian automation, communication and global markets. If you’d and robotics, hard rock and like to build your business coal mining as well as in and improve Australia’s global processing, efficient energy and competitiveness, contact sustainable metal production. us now.

B u i l di n g Au st r A l i A’s g lo B A l co m p e t i t i v e n e ss www.csiro.au CONTACT US

We would be delighted to discuss how we can work with your business.

Ian Dover Director, Business Development t +61 7 3327 4480 e ian.dover@csiro.au

MMM-MESCA-ad-177x125_landscape-20121030.indd 1 324536A_CSIRO | 2065.indd 1

Scott McNeil SME Engagement Manager t +61 7 3327 4427 e scott.mcneil@csiro.au 31/10/2012 1:20:19 PM

9:37 AM MESCA MEMBERS DIRECTORY24/09/13 VOL 8 • 49

MESCA SUPPLIERS Industry Buying Guide

Other Countries: CSIRO Chile International Centre of Excellence in Mining and Mineral Processing.

Specialisation: Knowledge transfer and commercialisation To benefit Australia’s resources industry, we’re looking for innovative companies to help us move our latest developments from the lab to the market place. If you would like to build your business while also building Australia’s global competitiveness, contact us now.

Website:

www.csiro.au/org/ MineralsDownUnderFlagship.html Offices: QLD Address:

Phone:

PO Box 883, KENMORE, QLD 4069

07 3327 4480 07 3327 4737

Fax:

Custom Fluidpower Pty Ltd About: Custom Fluidpower is the largest independently owned fluid power solutions provider in Australia. Wholly Australian-owned, Custom Fluidpower offers a combination of hydraulic, pneumatic and lubrication products and services in the agricultural, aerospace, exploration, industrial, marine, mobile, mining and material handling industries. We pride ourselves on supply of quality products, product knowledge and the application of innovative thinking to product applications. With branches in Brisbane, Emerald, Gladstone, Mackay, Melbourne, Newcastle, Singleton, Perth and Port Hedland, we can offer fast and reliable service when you need it.

Activity: Custom Fluidpower is committed to providing the mining and associated industries with world-class, innovative solutions for all fluid power applications. We offer complete system design and project engineering supported by installation and commissioning. Custom Fluidpower conducts sales and supply of all leading brands of hydraulic components, along with asset management capabilities. We design and manufacture custom manifolds and can also manufacture power units covering a range of power ratings.

Custom Curtains & Linen Activity: The Fire Retardant Fabric Specialists are the providers of fire retardant fabric to the mining industry and other commercial industries. We currently supply a wide width fire retardant fabric as part of the installation process of the flow regulation beam in underground mines. We are providing a locally woven wide width fabric proving successful in underground mine situations, and our fabric complies to the Australian Standards. We are recognised as major suppliers of fire retardant fabric within Australia, creating a successful partnership with our customer base over many years.

Products: Wide width fire retardant base fabric used in the installation process of the Flow Regulation Beam. Widths available up to 2800mm in rolls to suit individual application eg 30m/50m.

Specialisation: Supplier of Australian Standard compliant fire retardant fabrics.

Website:

www.imaginefabrics.com.au Offices: Head Office – QLD Address:

Phone:

30 Habitat Place, BRIDGEMAN DOWNS, QLD 4035

07 3353 4630 07 3353 4650

Fax:

Products: Custom Fluidpower can cater to your complete hydraulic, pneumatic, filtration and lubrication product requirements, including: pumps, motors, hoses and fittings, cylinders, actuators, brakes, gearboxes, cartridge valves, manifolds and electronic controls.

Equipment: Custom Fluidpower supplies a range of hydraulic equipment, including custom-designed hydraulic power units, custom-designed manifold systems and electrohydraulic controls.

Specialisation: Custom Fluidpower specialises in complete system design for new systems and improvement of existing systems. We also offer custom-designed manifolds and cartridge valve technology.

Website:

www.custom.com.au Offices: QLD Address:

Phone:

36 Huntington Place, BANYO, QLD 4014

07 3307 8200 07 3267 3777

Fax:

Custom Transportable Buildings PtyLtd Offices: NSW

50 • MESCA MEMBERS DIRECTORY VOL 8

Address:

Phone:

64 Greenleaf Road, RAYMOND TERRACE, NSW 2324

02 9428 2211 02 9428 2211

Fax:

MESCA SUPPLIERS Industry Buying Guide

CV Services Group

Products: Low-voltage Variable Speed Drives / VVVF Drives up to 1.4MW.

Offices: QLD Address:

Phone:

Fax:

59-61 Qantas 07 3622 4333 07 3622 4334 Drive, EAGLE FARM, QLD 4009

Danfoss (Australia) Pty Ltd About: Danfoss VLT Drives is part of the Power Electronics Division of the global Danfoss group. The Danfoss group consists of six core businesses, each with a focus on Climate and Energy, with the Power Electronics business providing high-quality energy-efficient power electronic solutions that help save energy and optimise processes. Being dedicated to Variable Speed Drives (also commonly known as VVVF Drives) since production of the first mass produced VSDs in 1968 has resulted in Danfoss VLT Drives being one of the leading global manufacturers of VSDs. Combining this dedication to VSDs with producing innovative and dependable products with valueadded features and functions built in, provides benefits to our customers typically resulting in lower overall initial costs and lower operating costs.

Activity: Danfoss VLT Drives Australia supplies and supports Danfoss’ VLT® Drives through local Danfoss sales and service offices in each state. These offices combined with a comprehensive authorised service partner network ensures help is at hand whenever it’s needed, and mining customers are supported no matter how remote the mine site is.

327512A_CTB | 2065.indd 1

Danfoss VLT® Drives are the optimum choice for customers in the mining segment. Available with a common user-friendly interface throughout the whole range, and designed with the installer and operator in mind, they contribute to saving time and costs during installation, commissioning and maintenance. This combined with their robust, rugged design, inclusion of harmonic and EMC filters, and ability to be installed with long motor cables as standard ensures long life and reliable operation of the VSD in typical arduous mining and processing plant applications. Being designed for long motor cable installations as standard typically results in a more compact solution compared to VSDs that need to add options to operate reliably with long motor cables. This often results in considerable initial cost savings as a result of being able to use smaller air conditioned switchrooms. The high efficiency and resulting low losses from Danfoss VLT Drives can have a considerable impact on the operating cost and environmental impact of the drives installed. Depending on mine site conditions, the added ability to simply utilise outside air to remove 85% of the VSDs heat loss instead of exhaust it into the air-conditioned switchroom can result in smaller, lower cost air-conditioning units for the switchrooms along with considerably lower operating costs of that air conditioning. Low harmonic drives incorporating an active filter along with stand-alone active and passive harmonic filters complement the range, and enable the best harmonic mitigation solution to be selected as required. If you’re not using Danfoss VLT® Drives on your site, you’re probably paying higher operating costs than you need to.

New Products: VLT® Low Harmonic Drive – a unique design combines an active harmonic filter and a standard VSD into a single low harmonic drive, providing an excellent alternative to Active Front End VSDs. With the active harmonic filter connected in parallel at the input of the VSD, a number of benefits result compared to AFE VSDs including lower losses and therefore lower

11/11/13 11:13 AM

MESCA MEMBERS DIRECTORY VOL 8 • 51

MESCA SUPPLIERS Industry Buying Guide

operating costs, more robust performance on pre-distorted or unbalanced mains supplies and no special requirements regarding motor compatibility.

Equipment: Low-voltage Variable Speed Drives up to 1.4MW 24 hour Service Support.

Banking and Finance, Legal, Sales and Marketing, Human Resources, Energy, Oil and Gas, Information and Communication Technology (ICT), Technical and Operations, Construction and Property, Mining and Resources, Engineering and Supply Chain.

Other Countries: We work with both National and International Clients and Candidates.

Other Countries:

Website:

Global (>100 countries).

www.d-r.com.au

Website:

Offices: QLD

www.danfoss.com/pacific Offices: VIC Address:

Phone:

Unit 97, 45 Gilby Road, MOUNT WAVERLEY, VIC 3149

03 9538 4444 03 9543 5066

Fax:

Address:

Phone:

Level 8, 344 Queen Street, BRISBANE, QLD 4000

07 3023 1000 07 3221 5810

Fax:

Davies Wear Plate Systems

David Brown Gear Industries Website:

www.davidbrown.com Offices: NSW Address:

Phone:

PO Box 121, BULLI, NSW 2516

02 4283 0300 02 4283 0333

Offices: WA Address:

Phone:

18 / 63 Knutsford Avenue, BELMONT WA 6104

08 9476 8000 08 9277 2694

Fax:

Decmil Australia Pty Ltd Website:

www.decmil.com.au

Davidson Recruitment About: We are a partnership of two lawyers – brothers Rob and Bruce Davidson – and an accountant, Peter Murphy, who set about creating a different kind of recruitment company. We were founded in 1991 on a very simple principle: if people work in jobs they love, their lives are a whole lot happier and more fulfilled. Our leaders know that their principal role is to make their people happy. It makes for a fun and productive workplace. Although we’ve grown to become one of the largest and most successful recruitment companies in Queensland, our philosophy hasn’t changed. We’re still owned by hands-on managing partners. Our staff are a dedicated group of people, who are all passionate about helping others find stimulating and fulfilling employment. These candidates will in turn bring genuine enthusiasm, commitment and drive to their new roles. We are boutique and big at the same time. We pride ourselves on our agile, responsive and dedicated client service delivery model. We are also proud of the fact that three years in a row, job-seekers around Australia voted us ‘Australia’s Favourite Recruiter’. But we’re even more excited about what it means – we’ve helped thousands of people find fulfilling roles. Many of our clients come to us via personal recommendations from friends or colleagues whom we’ve placed previously – and we think this kind of recognition is the ultimate accolade.

Activity: Davidson Recruitment (DR) combines the best recruitment consultants, processes and technology to deliver high-quality, yet affordable recruitment solutions. We provide permanent, contracting and temporary recruitment services Australia-wide and overseas (both candidate sourcing and client servicing) across 14 specialist recruitment divisions covering all key market segments. These include Executive and Management, Accounting, Business Support,

52 • MESCA MEMBERS DIRECTORY VOL 8

Offices: QLD Address:

Phone:

Level 5/60 Edward Street, BRISBANE, Queensland 4000

07 3640 4600 07 3640 4691

Fax:

Depth Logistics Pty Ltd About: Depth Logistics – The Art of Logistics Management and Technology Depth Logistics is a neutral, non-asset based 4PL, Lead Logistics service provider and consultancy. We specialise in transportation and consultancy of shipping project and heavy cargo all over the planet for companies involved in earthmoving, mining, construction, petrochemical, water and energy production related industries. Our team of master logisticians and specialist consultants have an enviable track record in assisting our clients design, re-engineer, optimise and manage all aspects of their logistics and supply chain needs. Depth Logistics is focused on delivering continuous improvement, cost reduction and world-leading supply chain technology platforms so our customers can then concentrate on their own core business rather than logistics. The depth of experience in our team is second to none. The difference with Depth Logistics is that our team hasn’t just consulted in this field, we have owned and operated companies engaged in: • Customs brokerage • International freight forwarding • Heavy haulage

MESCA SUPPLIERS Industry Buying Guide

• • •

Crane hire Quarantine approved premises (QAP) Warehousing and storage.

Due to this firsthand experience and knowledge, we understand intimately the pressure points of all links in the logistics chain, which means better outcomes for our clients. Depth Logistics proprietary cloud-based “myCargo” IT platform enables real-time visibility, analytics and management of the complete supply chain. The platform is completely customisable by our in-house programmers and integrates with most commonly used ERP systems easily. We appreciate that mobility is key, so that is why our platform is smartphone enabled via our own myCargo app. Our sister company, Depth Offshore, complements our logistics service offering by providing business process outsourcing to meet a broad range of clients’ support roles and needs. With all of these resources combined, Depth Logistics can provide the complete logistics solution for your company.

Activity: Freight Forwarding, Ro/Ro and break bulk over-dimensional shipping, customs clearance, Biosecurity management, transport, pre-delivery processing, bonded storage, supply chain optimisation.

Products: Specialised 4PL lead logistics provider, freight forwarder/customs brokerage providing logistics management solutions for over-dimensional cargo for the earthmoving, mining, construction, petrochemical, water and energy production related industries.

New Products: Proprietary cloud-based “myCargo” IT platform enables real-time visibility, analytics and management of the complete supply chain; Biosecurity Management and Consultancy; 4PL supply chain solutions.

Equipment:

This type of shipping is our core business and routine for us. From bulldozers through to enormous modularised cargo for major projects we have the experience and contacts to transport your cargo safely, on time and on budget. Our depth of RoRo, break bulk and full vessel chartering experience is unsurpassed. Our approach is “hands on” which means we actively coordinate the cargo’s movement efficiently through every link in the transportation chain. Tariff Consultancy Our tariff consultants are adept at minimising your import duty and taxes within the law. Depth Logistics tariff consultants are fully conversant with tariff concessions and by-laws that can save you money. We can check the applicability to your cargo or apply to customs for a concession for you. Many countries have special schemes on import duty and tax treatment for major projects. We can advise on and apply for “project” status on your project. We can also undertake audits of past import shipments to ensure that no opportunities to apply concessions has been missed by your customs broker. If there has, we can apply for refunds on your behalf. Customs Clearance Depth Logistics can arrange import customs clearance of your cargo anywhere in the world. Our team understands heavy machinery and how to coordinate the import clearance process so the cargo flows smoothly. Marine Insurance We strongly recommend that each and every shipment you move is covered by a comprehensive marine insurance policy. Depth Logistics can advise you on the various types of cover and suggest what would be most appropriate for you. Depth Logistics acts as insurance agents for Chubb Insurance so we can provide competitive and quick cover for your cargo on a per shipment basis, or we can also put in place an annual policy.

2 x 1st Class Customs and Quarantine facilities located within 5km of Brisbane Port. Heavy Haulage vehicles.

If you are a myCargo user, you can insure your cargo online and print the insurance certificate out right in your office in minutes. You save money by doing this online; however, we are happy to do it for you upon request.

Other Countries:

Website:

Australia; New Zealand; Philippines.

www.depthlogistics.com

Specialisation:

Offices: QLD

Biosecurity Consultancy Biosecurity Inspections and Audits of fabrication and assembly facility. Creation of Biosecurity Management Plan. Pre-Shipment Inspection of cargo to ensure there is no re-export risk by minimising biosecurity contamination. We also can assist with other biosecurity related treatments, including washing and fumigation. The depth of experience we have in the field is without peer. Heavy Logistics and industrial project consultancy Heavy logistics and industrial project consultancy is a specialised field that requires practitioners to have operational experience in all modes of heavy logistics. The Depth Logistics team is compromised of senior executives who have operated international freight forwarding, trucking and crane hire companies in heavy cargo transport. The focus of our consultancy in this field is to help large and small shippers choose the right strategy and service providers to accomplish their objectives for their cargo and project.

Address:

Phone:

PO Box 317, BULIMBA, QLD 4171

0414 666 286

DHL Global Forwarding (Australia) Pty Ltd Offices: QLD Address:

Phone:

9 Viola Place, HAMILTON, QLD 4007

07 3637 7100 07 3637 7228

Fax:

We can assist in strategy and logistics plan development and can handle everything from route surveys, RFQs and tenders through to supervising delivery all the way to site. We can add significant value to any shipper undertaking major projects or transport of heavy cargo anywhere in the world. International Freight Forwarding Depth Logistics specialises in shipping heavy, large and over-dimensional cargo to and from anywhere in the world. We also handle major industrial projects.

MESCA MEMBERS DIRECTORY VOL 8 • 53

MESCA SUPPLIERS Industry Buying Guide

Diversified Mining Services Limited About: Diversified Mining Services (DMS) is a leading provider of services to the Australian mining industry with extensive experience in the provision of services and equipment for the operation, maintenance and support of open-cut and underground mining. DMS’ highly diversified product offering, is focused on servicing the coal and mineral processing industries with a particular focus on both Queensland and New South Wales. DMS businesses hold preferred supplier status with major mining companies, prime contractors and OEM(s). DMS has a fully integrated service offering, which allows the company to provide clients with a larger range of services across a simpler, more streamlined and cost-effective delivery platform. DMS has operations in Mackay, Gladstone, Brisbane, Newcastle and Wollongong. In addition, DMS operates numerous client sites.

Activity: Operations Support and Maintenance including equipment to the mining, mineral processing, energy and infrastructure industries in Queensland, New South Wales and New Zealand.

Products:

Donaldson Australasia Pty Ltd About: Donaldson Australasia Pty Ltd is an ISO 9001-accredited company and is a subsidiary of the Donaldson Corporation (DCI), a Fortune 1000 company listed on the New York Stock Exchange. Donaldson employs over 12,000 people at its 47 facilities globally, and is a market leader in filtration for a wide variety of markets ranging from consumer markets through to automotive, heavy-duty filtration, microprocessing, industrial markets and defence applications. Mining is one of Donaldson’s core markets with a range of products designed to extend engine service life and reduce the total cost of operation for vehicles in heavy dust environments.

Activity: Donaldson provides total filtration solutions for a wide variety of markets, including engine filtration, industrial filtration, microprocessing, process filtration, hydraulic filtration and dust, mist and fume collection. Donaldson’s core range of engine filtration products service the wide variety of applications in the mining sector with elements and hardware for vehicles, compressors, hydraulic installations, bulk liquid storage, turbine and engine installations. All Donaldson products are covered by full manufacturer’s warranty. Donaldson also offers a full range of after-sales and technical support services to help keep vehicles and machinery in the field for longer.

•

Underground mining support services

•

maintenance of large-scale plant and equipment

•

construction and maintenance of scaffolding

•

steel and aluminium fabrication

•

equipment hire

•

painting and corrosion protection

•

equipment rebuilds

•

workshop overhauls and repairs, and on/off-site line boring

•

general and precision machining

•

specialised component fabrication

New Products:

•

general design and drafting services

•

preparation plant equipment refurbishment

•

abrasion resistant coatings

New products include Donaldson’s Endurance range of air and liquid filtration, which is specifically designed to extend service life in vehicles operating in high dust environments such as mining.

•

engineering and maintenance of mobile equipment

•

manufacture of Coaltram LHDs

•

car and truck repairs.

Products: Donaldson’s engine air product range includes air elements, air housings and assemblies, air intake accessories, ducting/tubing. Donaldson’s wet filtration range includes spin on and cartridge filtration for all liquid transfer, including filters for oil, fuel, coolant, hydraulics and transmission. Donaldson also offers filtration for fixed and mobile plant hydraulics, fluid separation products as well as heavy-duty organic and synthetic coolants, tyre and rim protection as well as enviro-friendly coolant options.

The Donaldson Endurance filtration program can dramatically reduce running costs whilst keeping vehicles working in the field for longer. Donaldson PowerCore Generation 2 is the latest range of air filtration products for use in a wide range of on-highway and off-highway vehicles. With seven times the holding capacity of standard media, Donaldson PowerCore provides optimal filtration in a compact size making Donaldson’s PSD air cleaners a viable solution for compressors or engines where space limitations exist.

New Products: Coaltram LHD CT08.

Other Countries: China, Europe, New Zealand and South Africa.

Specialisation: Operations Support and Maintenance.

The filtration media also utilises the latest in nanofibre technology. Donaldson TRAP breathers offer an effective low-cost solution for bulk tank liquid storage in helping maintain the integrity of fluids in bulk tanks or drums.

Other Countries:

Website:

USA, Europe, China, Asia.

www.dmsgroup.com.au

Website:

Offices: QLD Address:

Phone:

Fax:

PO Box 201, TOOWONG, QLD 4066

07 3719 6888 07 3870 2288

54 • MESCA MEMBERS DIRECTORY VOL 8

www.donaldsonfilters.com.au Offices: Australasian Head Office – NSW Address:

Phone:

Fax:

PO Box 153, 02 4350 2000 02 4351 2036 WYONG, NSW 2259 Email: donnac@donaldsonfilters.com.au

MESCA SUPPLIERS Industry Buying Guide

Downer Infrastructure About: Downer Australia, Downer New Zealand and Downer Asia have recently come together to form Downer Infrastructure. The Downer Group now consists of three businesses – Downer Infrastructure, Downer Mining and Downer Rail. Downer Infrastructure is a $5 billion business that contributes around half of Downer Group’s revenue and earnings before interest and tax. The new division has work-in-hand of $8.4 billion (31 December 2011) and employs over 14,000 people. Downer Infrastructure provides customers in Australasia with an integrated consulting, engineering, contracting and asset management business that establishes the platform for the division to become the largest asset management services business in Australasia.

Activity: Downer provides integrated solutions to support the critical infrastructure needs of our customers in the core markets of Minerals and Metals, Oil and Gas, Power, Transport Infrastructure, Water, Communications, Social Infrastructure and Property. For Minerals and Metals, and Oil and Gas customers, we offer comprehensive engineering and construction services that support the asset life cycle from concept, design and planning through to construction, operation and maintenance. Our customers include BHP Billiton, Rio Tinto, Xstrata, Wesfarmers, Woodside and Fortescue Minerals Group. In the Power sector, we provide a complete engineering, procurement and construction service for transmission lines, substation developments and renewable development for customers including Transgrid and Powerlink. For Transport Infrastructure customers, we offer one of the largest nongovernment owned road and rail services business in Australia: operating from a national network of over 50 depots and maintaining more than 40,000 kilometres of road and 2,800 kilometres of rail. For public sector and industrial Water customers, we provide design and construction, operations, and maintenance services for water and wastewater infrastructure. Our customers include Water Corp WA and SA Water. In the Property sector we support the building infrastructure development installation and facility management of these assets for customers, including Coles, ANZ and Landcorp WA.

Products: Downer is unique for its diverse capabilities and comprehensive services delivered across a wide range of markets and geographies. We are committed to focusing on the long-term needs of our clients and developing mutually profitable partnerships. We maintain a continued focus on improving our clients’ assets, and can offer services and support throughout the complete asset life cycle, from design and planning through to operation and maintenance.

New Products: As one of the largest producers and users of asphalt in Australia, we own and operate more than 30 asphalt plants, which produce and supply nearly two million tonnes of asphalt each year. Downer’s commitment to Zero Harm and continuous product development has resulted in three unique bitumen solutions: Recycled Asphalt (RAP), Warm Asphalt Mix (WAM) and the new Suspended Fibre Technology (SFT). Microsurfacing SFT offers increased flexibility and tensile strength over standard microsurfacing applications. In conjunction with Flexitex PMB emulsion technology, SFT provides the highest values for pavement flexibility of any known thin surfacing application. WAM uses a specialised water injection process that allows us to produce WAM at 40-50°C lower than standard hot mix asphalt. The use of EcoPhalt WAM results in approximately a 30% reduction in energy use and up to an estimated 35% reduction in carbon emissions.

Equipment: The Mineral Technologies, a Downer business based on the Gold Coast, is recognised as a leader in mineral separation and mineral processing solutions worldwide. Mineral Technologies delivers a comprehensive range of integrated equipment and services that cost-effectively transform ore bodies into high-grade mineral products. The equipment includes: Gravity Separation Spirals Centrifugal Jig High Tension Roll Separators Plate and Screen Electrostatic Separators Tribostatic Separator Wet High Intensity Magnetic Separator (WHIMS) Induced Roll Magnetic Separators (IRMS) Rare Earth Magnetic Separators (RERMS & REDS) Low and Medium Intensity Magnetic Separators Ultra Fine Grinding Mill Shaking Tables Knudsen Bowl.

Other Countries: We operate in Australia, New Zealand, Asia and the South Pacific.

Specialisation: Downer Infrastructure has a focus on the following markets and segments: Minerals and Metals Alumina (processing, refining, and smelting) Coal (processing and materials handling) Base metals (including nickel, copper, zinc, lead, and gold) (processing, refining, and smelting) Non-metallic minerals (including cement) (materials handling, and processing) Energy/Power Substations (design, construct, commission, and control panel manufacture) Power Stations (design, construct, and commission; specialising in balance of plant) Distribution lines (overhead and underground construction and maintenance) Energy/Oil, Gas, and Petrochemical Oil refining (refining) Natural gas (processing) Coal seam methane (gathering and compression) Chemical plants (processing) Transport Rail (tracks, construction and maintenance) Road (asphalt paving, network maintenance, rejuvenation and stabilisation) Airports (asphalt paving and maintenance). Our focus on key markets enables us to better understand the needs of our clients and provide the appropriate level of support and services, while ensuring our management and employees have the relevant skills and experience. Our concentration on these market segments provides Downer Infrastructure with the opportunity to invest in training, personnel development, and systems in nurturing long-term relationships with our clients.

Website:

www.downergroup.com Offices: VIC Address: Level 2, 468 St Kilda Road, MELBOURNE, VIC 3004

MESCA MEMBERS DIRECTORY VOL 8 • 55

MESCA SUPPLIERS Industry Buying Guide

Downer Rail

Pre-design Surveys to DMR specifications.

About:

Equipment:

Experienced Survey Crews.

Downer Rail is a division of Downer, a top-100 ASX company that provides comprehensive engineering and infrastructure management services to the public and private transport, energy, infrastructure, communication and resources sectors across Australia, New Zealand, the Asia Pacific and the United Kingdom.

Activity: The Rail division of Downer has delivered, or is in the process of delivering, more than 1500 locomotives and 1700 passenger cars to Australian rail operators, including all of the electric passenger rolling stock for Brisbane and Perth, and the Waratah Train Project for the supply of new passenger cars to Rail Corporation of New South Wales. The Downer Rail/Bombardier joint venture has delivered 46 three-car sets (138 railcars) to the Public Transport Authority (PTA) in Western Australia. The joint venture has been awarded a contract for the supply of 15 additional three-car sets and also for the maintenance of all A and B class cars on behalf of the PTA.

Products: Our range of expertise covers: •

Rolling stock design, manufacture and maintenance

•

Project financing and leasing

•

Rail signalling, security and safety solutions for passenger cars, freight wagons, locomotives and light rail.

New Products: GT46C ACe 4300HP standard gauge AC traction locomotive GT46CU ACe 3000HP narrow gauge AC traction locomotive SD70 ACe 4300HP standard gauge AC traction locomotive.

Specialisation: Design, delivery, manufacture, maintenance, refurbishment and decommissioning of rolling stock.

Website:

www.downergroup.com Offices: QLD Address:

Phone:

Fax:

2 Burke Street, 07 3249 0316 07 3831 3683 WOOLLOONGABBA, QLD 4102

Downes Group Pty Ltd About: Downes Group is a multidisciplinary planning, surveying, environmental science and project management development consultancy practising from bases on the Sunshine Coast, Surat Basin, Darling Downs and Brisbane. We deliver timely, quality outcomes for our blue-chip client base in Energy and Resources, Infrastructure, Urban Development and Spatial Science Industries through thorough planning, informed decision-making and cohesive teamwork.

Activity: Planning, Survey and Environmental Services for Infrastructure Projects, LNG, UCG, Mining and Resources.

Products: Environment and Planning Approval Management for Major Infrastructure and Resource Sector Projects.

56 • MESCA MEMBERS DIRECTORY VOL 8

BMA Spec 4x4 Vehicles Trimble RTK GPS Receivers Trimble S6 Robotic Total Stations and 12d Leica Digital Levels.

Specialisation: LNG Planning and Environmental Approvals, Construction Surveying, Open-Cut Coal Mining Survey, Precise Conveyor Installation, Pipeline and Easements, Web2 Spatial Data Management Expertise, GIS and GPS.

Website:

www.downes.com.au Offices: QLD Address:

Phone:

20 Inverai Road Warrego Highway, CHINCHILLA, QLD 4413

07 4669 1222 07 4668 2090

Fax:

Downing Teal Pty Ltd About: Downing Teal was established in Perth, Western Australia, in 1966 and we have subsequently grown to five offices in Australia, and internationally in the USA, Chile, Peru and Columbia. As part of the Downing Teal network, we also have alliance offices in South Africa and Canada. Downing Teal offices work collaboratively to provide global solutions to your global challenges. Our people live in your world. Across the Downing Teal business, our philosophy of engagement is firmly directed at providing each client with a targeted, proprietary and transparent process, designed to achieve successful commercial outcomes. We take nothing for granted and ensure every engagement is handled with the skill, experience and respect developed over five decades. The prolonged success of Downing Teal has been guided by an absolute focus and adherence to ethical standards in all matters. We pride ourselves on successful outcomes, and long-term relationships.

Activity: For almost 50 years, Downing Teal has served the capital-intensive natural resources, utilities, infrastructure, engineering and construction sectors. Over that time, we have grown our presence to include the world’s major resource and development centres. Today, Downing Teal stands out as one of the few international recruitment consultancies with the presence, people, knowledge, experience and systems to support a truly global search capability.

Products: Executive Search, Network Search, Advertised Selection, Interim Management, Project Staffing.

Other Countries: USA, Canada, Chile, Peru, Columbia, South Africa.

Specialisation: Natural resources, utilities, infrastructure, engineering and construction sectors.

Website:

www.downingteal.com

MESCA SUPPLIERS Industry Buying Guide

Offices: QLD Address:

Phone:

333 Ann Street, BRISBANE, QLD 4000

07 3221 6255

Draeger Safety Pacific Pty Ltd is one of the leading suppliers in Portable Gas Detection, Breathing Equipment as well as Drug and Alcohol Detection, and is a significant and progressive equal opportunity company in the Australian and Pacific area markets. MISSION AND VISION Our great passion is to continually improve our understanding of our customers and their markets. Important success factors in this connection are: our ability to become inspired, our creativity, and our willingness to work – factors that have substantially influenced and shall continue to influence the way we think and act on our successful path to worldwide innovation leadership as a demand-oriented solution vendor. With this strong drive, we continually set new standards in the spirit of our brand motto “Technology for Life”.

Draeger Safety Pacific Pty Ltd About: BACKGROUND Draeger Safety Pacific Pty Ltd is a subsidiary of Drägerwerk AG in Germany and was incorporated in Australia in 1963. The parent company commenced business in 1889 in Lübeck, Germany, developing into an international company, with additional manufacturing facilities in several European locations, North and South America, China, South Africa and Australia. The whole Dräger range encompasses products and services from the field of safety and medical technology. Dräger Safety develops, produces, sells and services equipment and systems worldwide which, in addition to assisting human respiration, are designed to monitor and protect life-supporting functions while at the same time creating better and safer conditions for the environment.

Activity: Draeger provides “Technology for Life” through the supply, service, rental of and training on safety equipment.

Products: Breathing protection equipment, escape equipment, portable gas detection equipment, fixed gas detection equipment, chemical protective clothing, customised breathing air solutions, breathing air compressors, emergency response equipment, helmets, thermal imaging cameras, communication equipment.

New Products:

Draeger Safety Pacific Pty Ltd represents Dräger’s safety technology in Australia, New Zealand, Papua New Guinea and numerous Pacific Islands. Additionally, Draeger Safety Pacific Pty Ltd holds agency agreements with Bauer Kompressoren, Capital Safety and Amkus.

Xam 5600 portable gas detection device for the detection of up to 6 gases; Oxy 6000 self contained oxygen self rescuer; D 7000 Quickfill Station.

Commencing from April 1991, Draeger Safety Pacific Pty Ltd has assembled and supplied breath alcohol detection and testing devices for Australian and international markets.

Global, head office in Germany.

Other Countries:

Leaders of petroleum, chemical and petrochemical storage tank manufacturing Australia wide

Fuel Your Imagination...

Our Products Include: • Double Wall WrapTank™ • Double Wall Containerised WrapTank™ • Double Wall Minor Storage WrapTank™ • Double Wall Fire Rated Above Ground Storage Tank • Underground Double Wall Storage Tank Plasteel® Elutron® Jacketed Tank • Single Wall Above Ground Storage Tank • Custom Fabricated Tanks • Comprehensive Range of Pumping & Fluid Handling Systems • Fuel Management Systems

1300 886 315

Darwin

Perth

Brisbane Adelaide Sydney

www.dtegroup.com.au enquiries@dtegroup.com.au

MESCA MEMBERS DIRECTORY VOL 8 • 57

MESCA SUPPLIERS Industry Buying Guide

Specialisation:

Website:

Escape equipment, Atmospheric Monitoring, Breathing Air solutions.

www.dtegroup.com.au

Website:

Offices: Head Office – WA

www.draeger.com Offices: Head Office – VIC Address:

Phone:

Unit 99, 45 Gilby Road, MOUNT WAVERLEY, VIC 3149

1800 677 787 1800 647 484

Fax:

DTE Group Pty Ltd About: Our philosophy of product innovation and introduction of new technologies allow us to maintain our reputation as market leader in tank manufacturing and fuel management. Customers are able to buy direct from the manufacturer for a cheaper and cost-effective approach. All equipment is made safe to site specifications. We deliver high-quality outcomes on time and have a proven track record.

Activity: DTE Group is proudly 100% Australian-owned and has sales offices in Western Australia, New South Wales, South Australia and Queensland. We are committed and devoted to supplying quality storage tanks and fluid-handling solutions to the demanding applications as found in the petroleum, chemical, industrial, power, process and mining industries. Our manufacturing facilities are located in Perth and Brisbane. Established in 2000, DTE Group has grown to become the market leader in tank manufacture design, and installation in Australia.

Products: DTE Group offers a complete range of storage tank options and we also provide fuel installations, maintenance and service plans for new or existing installations and retail fuel management systems, including National Measurement Institute-approved systems, fuel filtration systems and design, and licensing for new fuel installations. Our products include: •

Double wall WrapTank™ (up to 200,000 Litres)

•

Double wall containerised WrapTank™

•

Double wall minor storage WrapTank™

•

Double wall fire rated above-ground storage tank

•

Underground double wall storage tank Plasteel® Elutron® jacketed tank

•

Single wall above-ground storage tank

•

Custom fabricated tanks

•

Comprehensive range of pumping and fluid handling systems

•

Fuel management systems.

New Products: DTE Group is now able to offer: •

T200 – 200,000 Litres double wall WrapTank™

•

HyQube WrapTank™– Containerised WrapTank™ ranging from 10,000 Litres to 100,000 Litres

•

Fire rated tanks.

For additional information, please contact: enquiries@dtegroup.com.au, call 1300 886 315, or visit our website at www.dtegroup.com.au

Specialisation: Leaders of petroleum, chemical and petrochemical storage tank manufacturing Australia-wide. We provide turnkey solutions for storage tanks and fluid solutions.

58 • MESCA MEMBERS DIRECTORY VOL 8

Address:

Phone:

Suite 5/100 Mill Point Road, SOUTH PERTH, WA 6151

1300 886 315

Dulux Protective Coatings About: Dulux Protective Coatings are principally designed to provide long-term protection of assets, plant and equipment from atmospheric deterioration, corrosion, chemical attack and abrasion in every type of industry, in every situation from severe coastal and marine and corrosive environments to the milder inland areas. Industries like: •

Oil and Gas – both on- and off-shore

•

Mining and Mineral Processing

•

Infrastructure

•

Power Generation

•

Water and Wastewater

•

Commercial construction

•

Civil engineering.

With state-of-the-art, world-class, Australian research and development laboratories, supported by our Australasian manufacturing base spanning Australia, New Zealand and China, and a distribution network unrivalled in this part of the world via our 230+ Dulux Trade Centres, Dulux Protective Coatings provides our customers with world-leading technology, local market presence, depth of experience and the technical expertise that ensures a rapid response to their needs.

Activity: Dulux Protective Coatings is a leading Australasian manufacturer and supplier of high-performance, heavy-duty protective coatings across the Asia Pacific region. For more than 75 years, Dulux Protective Coatings has lead the market in developing products for industry that can handle the unique conditions they face in Australasia. Extreme high/low temperature deviations on a daily basis, salt water corrosion, chemical exposure and abrasive attack calls for heavy-duty protective coating products designed specifically for the substrate and environment they are required to protect. Our Technical Team can tailor specifications for high-performance coating systems to resist high temperatures, abrasion, impact, solvents, petrochemicals, acids, alkalis, immersion, UV deterioration; everything you need to protect your valuable assets. Our extensive track record demonstrates the success of our cost-effective alternatives to hot dip galvanising and other forms of corrosion protection. Our maintenance systems are practical and effective. You, our customer, benefit from reduced downtimes, lower maintenance costs and sustained value of your important assets.

Products: Our comprehensive coatings range includes chlorinated rubbers, epoxies, inorganic zinc silicates, polyureas, polyurethanes, vinyl esters, zinc phosphates and zinc-rich epoxies.

New Products: Minemaster – 360°mine marking spraypak Pyroshield S60 and S120 – Structural steel intumescent passive fire protection.

MESCA SUPPLIERS Industry Buying Guide

Website:

Activity:

www.duluxprotectivecoatings.com.au

Manufacturer / Supplier of Suspended Dump Bodies / Trays for haulage and other applications.

Offices: Head Office – VIC Address:

Phone:

Fax:

Mobile:

1956 03 9263 5678 03 9263 5885 0412 330 856 Dandenong Road, CLAYTON, VIC 3186

Products: The principal product line offered is the unique Duratray rubber Suspended Dump Body (SDB). This design consists of a thick but flexible rubber wear mat supported on high-capacity synthetic suspension ropes, which are anchored and tensioned into the sides of a high-tensile skeleton steel frame; the entire load-carrying system has been upgraded over the years of development and has evolved to become a truly low-maintenance dump body compared to traditional trays lined with abrasion resistant steel.

Durapower Industries

•

Increases payload: Increase in production targets due to its capabilities of preventing material from building up during loading and unloading.

About:

•

Reduces carry back with wet or cohesive materials due to the flexible rubber system.

•

Reduces noise levels – The absorbency of the flexible rubber floor reduces the shock impact decreasing the noise levels between 8 to 10dB.

•

Higher operational availability – A rubber mat takes approximately two shifts to be replaced while to repair a steel floor, the steel bodies are taken out of operation for a period of two to three weeks.

•

Lower shock and vibration to the truck and its operator – The absorbency of the flexible rubber floor reduces stress on the chassis frames, suspension and the truck’s instrumentation. The elasticity of the floor gives the truck an additional level of suspension.

•

Resistance to extreme abrasion – The rubber floor lasts approximately 4 years, while a steel floor is replaced every year in abrasive conditions.

•

Duratray SDB – Customised Design to Outlast and Outperform.

At Durapower Industries, our products are designed to work, and built to endure. We specialise primarily in dewatering fluid transfer pumps, water evaporation products and fuel storage equipment for the resources and mining, industrial, infrastructure and agricultural sectors. Our entire product range is engineered to new standards of quality, engineering excellence and innovation, and our quality-assured process delivers a no-risk investment every time.

Products: Flowforce dewatering pumpsets – Pontoon, trailer and skid configurations Air diaphragm pumps Fuel storage Fuel transport Generators

New Products:

Diesel engines

Durarail – Suspended Railcar System DuraLite – Lightweight Steel body DRL – Duratray Rubber Liners for all sorts of applications.

Water evaporation Pipe accessories Water truck stand pipes Pump accessories

Other Countries:

Water cannons

Antofogasta / Chile: Ph +56 55 598 989

Valves and fittings

Denver / USA: 16 Market Square, 1400 16th Street Suite 400; Ph + 1 720 932 8212

Support Equipment.

www.durapower.com.au

Agents and Distributors Canada - SMS Equipment; Ph (East) +514 636 4087; (West) +780 948 2200 Mexico – GOCLINER, Ruiseñor #88, El Rosedal, Coyoacan, D.F.; Ph +52 55 5336 3706

Offices: QLD

South Africa - DCD Venco, 1 Diesel Street, Industrial Area, Newcastle; Ph. 27 34 3755401

Website:

Address:

Phone:

1-3 Industrial Place, YANDINA, QLD 4561

07 5446 7411 07 5446 8917

Fax:

Duratray International Pty Ltd About:

Website:

www.duratray.com Offices: QLD Address:

Phone:

Unit 10, 70 Connors Road, PAGET, QLD 4740

07 4998 5693 07 4998 5693

Fax:

Duratray International and its group of companies specialise in the design, engineering, manufacturing and commercialisation of dump bodies, spare parts, steel and rubber components for haulage equipment. In addition, Duratray provides services such as technical assistance, maintenance and parts replacement. The Duratray’s staple product, the Suspended Dump Body (SDB), provides benefits in terms of resistance to abrasion, carry-back reduction, reduced maintenance requirements, OH&S improvement to operator plus Environmental Safety by noise level reduction in the overall operation. SDBs are lighter in weight and have higher volumetric capacity than standard steel floor designs. Duratray SDBs are currently installed on 30 tonne to 380 tonne trucks globally.

MESCA MEMBERS DIRECTORY VOL 8 • 59

MESCA SUPPLIERS Industry Buying Guide

East Coast Pipe Supplies

Endress+Hauser Australia

About:

Established over 25 years, East Coast Pipe Supplies is the largest privately owned steel line pipe and casing distributor in Australia.

Activity:

Endress+Hauser is a global leader in the provision of measurement instrumentation, services and solutions for industrial process engineering. With our support, customers optimise their processes with regard to economic efficiency, safety and environmental protection.

Specialist steel line pipe and casing distributor, for pressure, structural and casing applications.

Activity:

Products:

In Australia, Endress+Hauser cooperate and partner with local and global customers in key industries such as mining and metals, water and wastewater, and oil and gas.

Steel line pipe for pressure and structural applications. Steel casing for waterwell, CSM and oil and gas applications.

Other Countries:

Products: •

Flow Measurement

•

Electromagnetic; Coriolis; Ultrasonic; Vortex; dp

•

Level Measurement

•

Radar; Guided Radar; Ultrasonic; Radiometric (Gamma); Electromechanical; Vibronic; Capacitive; Conductive; Hydrostatic

•

Pressure Measurement

•

Process; Differential; Hydrostatic

Website:

•

Temperature Measurement

www.eastcoastpipe.com.au

•

RTD; Thermocouple

•

Density Measurement

Offices: VIC

•

Radiometric (Gamma); dp; Vibronic

•

Liquid Analysis

•

pH/ORP; Oxygen; Turbidity (Suspended Solids); Conductivity; Chlorine; Multiparameter; UV-Photometry; Colorometric; Samplers; Ion-Sensitive;

•

Moisture Analysers

•

Service

•

Maintenance

EATON Hydrualics

•

Repair.

Offices: Head Office – VIC

•

Prosonic Flow B200

•

FMR5x Series Radars

•

FMP5x Series Guided Radars

•

CM44x Liquid Analysis Multichannel Transmitter

•

Gammapilot FTG20 Switch.

New Zealand; Papua New Guinea.

Specialisation: Steel line pipe and casing for pressure, structural and waterwell, CSM and Oil gas casing applications Flush joint casing for coal mine degasification.

Address:

Phone:

Fax:

38 Pineapple Street, ZILLMERE, QLD 4034

07 3863 6100 07 3863 1700

New Products:

Address:

Phone:

Fax:

Unit 1, 101-105 Keilor Park Drive, TULLAMARINE, VIC 3043

03 9319 8222 07 5446 8917

Other Countries:

Emtivac Engineering Pty Ltd Offices: VIC Address:

Phone:

Fax:

Factory 8, 433 Hammond Road, DANDENONG SOUTH, VIC 3175

03 9768 3240 03 9768 3250

Global Locations: 19 Production Centres; 43 Sales Centres; 57 Representatives; 10,000+ Employees.

Specialisation: Measurement instrumentation, services and solutions for industrial process engineering.

Website:

www.endress.com.au Offices: NSW / NT Address:

Phone:

Level 1, 16 02 8877 7000 Giffnock Avenue, MACQUARIE PARK, NSW 2113

60 • MESCA MEMBERS DIRECTORY VOL 8

Fax: 02 8877 7099

MESCA SUPPLIERS Industry Buying Guide

Entura

Linings and waterproofing – Chemical and pressure grouting, thermo plastic and spray applied linings.

About:

Specialisation:

Our experience began in 1914, when the first Tasmanian hydropower scheme was commissioned by the then Hydro-Electric Department. Thirty power stations, 50 major dams and almost 100 years later, Hydro Tasmania are the largest producer of renewable energy in Australia, contributing 60% of the country’s renewable energy production. With a flow of 14 trillion litres of water through their integrated system, they are also one of Australia’s largest water managers. As Hydro Tasmania’s consulting business, Entura shares this experience and knowledge with clients to manage the technical and commercial risks of their own projects. Over the past 10 years, we’ve demonstrated amazing growth on a national and international scale, with involvement in many key water and energy projects. Today, Entura delivers expert services from offices in Hobart, Melbourne, Brisbane, Adelaide and New Delhi, as well as project offices in Sydney and Sarawak, Malaysia.

EPTEC specialises in offering solutions to a variety of problems, including corrosion protection, waterproofing, fireproofing and GRP/FRP applications. EPTEC.......when risk matters!

Website:

www.eptec.com.au Offices: Head Office – NSW

Entura offers a full range of consulting services related to planning, designing, constructing, operating and maintaining all kinds of major energy and water projects. Entura specialise in:

Address:

Phone:

463-467 Harris Street, ULTIMO, NSW 2007

02 9034 6969 02 9034 6970

Fax:

Ergon Energy – Energy Solutions

•

Renewable energy

•

Power engineering

•

Hydro power

•

Water management

•

Water infrastructure

•

Environmental management and planning.

About: Ergon Energy is one of Australia’s leading energy companies, with a network area that covers approximately 97 per cent of Queensland.

Website:

www.entura.com.au Offices: TAS Address:

Phone:

89 Cambridge Park Drive, CAMBRIDGE, TAS 7170

03 6245 4500

EPTEC Pty Ltd About: The EPTEC group are specialist contractors in Asset Preservation and Rehabilitation. Established in 1997, we have grown to be leaders in our field of operations. We operate nationally with offices in all mainland states. Our Integrated Management System conforms to: *ISO 9001 Quality Management Systems

Ergon Energy’s specialist Energy Solutions division has a long track record of delivering on time and to budget. Drawing on our experience and expertise in the energy industry, our specialist products and services are focused on modern energy solutions tailored to individual customer needs. Energy Solutions is a business partner of the highest integrity, combining strength of resource with nimble, responsive service. Through our proven track record of success with major, long-term projects, we understand the value of developing sustainable, effective business relationships.

Activity: We offer a wide range of manufacturing and high-voltage (HV) diagnostic services across Australia and overseas through our specialist division Energy Solutions. Drawing on extensive experience and expertise in the energy industry, Energy Solutions provides a one-supplier solution for innovative energy products and services.

Products: •

Factory built solutions: electrical infrastructure

•

Factory built solutions: data centres

•

HV test and diagnostics solutions

•

Primary plant solutions.

Website:

*ISO 14001 Environmental Management System

www.energysolutions.com.au

*AS4801 OHSandR Management System

Offices: QLD

and our accreditations include: PCCP Classes 1 – 5 (A&B) Painting Contractor Certification Program.

Activity: EPTEC specialises in Corrosion Protection, Waterproofing/Chemical grouting of concrete structures and soils/rock fissures, GRP/FRP repairs and carbon fibre strengthening.

Address:

Phone:

25 Buchanan Road, BANYO, QLD 4014

07 3621 9701 07 3267 1707 0419 028 099

Fax:

Mobile:

EPTEC is a driving force within the industry with strong history and solid reputation of providing premium services to the mining and energy industries. EPTEC.....when risk matters!

Products: Steel and Concrete corrosion control. Concrete Rehabilitation Fibre Reinforced Plastic Composites

MESCA MEMBERS DIRECTORY VOL 8 • 61

MESCA SUPPLIERS Industry Buying Guide

ESCO Australia

Offices: QLD

About: ESCO is a leading independent, global developer and manufacturer of highly engineered wear and replacement products used in resource mining, infrastructure, oil and gas, and industrial applications that are essential to the productivity of our customers’ machines.

Products: ESCO provides wear solutions for mining, infrastructure development and other challenging industrial wear applications. Engineered Products Group (EPG) wear parts include Ground Engaging Tools (GET), such as mechanically attached tooth systems, crusher parts, scrap recycling hammers and dragline rigging. We are a global market leader in GET products with an extensive offering of patented GET products. In addition to wear parts, ESCO also designs and manufactures wear parts carriers, such as dragline buckets.

Other Countries: The company operates in 28 countries on six continents, including an expansive network of 27 manufacturing facilities and more than 50 sales and distribution offices.

Specialisation: We have focused on product innovation throughout our nearly 100-year history. We believe our expertise in metallurgy, tribology (the science of wear), design engineering, manufacturing processes, and distribution are our core competencies. We have two divisions – Engineered Products and Ulterra.

Website:

www.escocorp.com

Address:

Phone:

Fax:

47 Trade Street, LYTTON, QLD 4178

07 3505 1050

07 3505 1076

ESS Engineering Services & Supplies About: ESS commenced operations in Wollongong NSW in 1980. Initially, it was a two-person concern, primarily marketing bulk flow aid devices such as air cannons and vibrators manufactured by Martin Engineering in the US. Success with these products led to the introduction of other Martin products such as conveyor belt cleaners and skirting systems. Rapid growth resulted and in 1985, the company moved its headquarters and manufacturing facility to Currumbin Qld. ESS currently employs 100 people Australia-wide and has a second manufacturing facility in Perth. In addition to the manufacturing operations, sales offices have been established in many key areas around Australia. ESS has grown to the stage where it is now by providing substantial product R&D for its original licensor, Martin Engineering.

Activity: As the licensed manufacturer and distributor of Martin® conveyor belt cleaning, sealing and support equipment, ESS provides solutions to common bulk handling problems, such as spillage, carryback, flow restrictions and dust emissions, through innovative practical equipment design.

“ EFIC DID MORE THAN

PROVIDE US WITH BONDS. THEY HELPED US DELIVER ONE OF OUR BIGGEST PROJECTS.” Murray Hadley, CEO, GCo Electrical

To find out if EFIC could help finance your project, please call 1800 093 724.

326321A_Export Finance & Insurance | 2065.indd 1

62 • MESCA MEMBERS DIRECTORY VOL 8

10/12/13 11:49 AM

MESCA SUPPLIERS Industry Buying Guide

The benefits to end users are increased output and safety while reducing clean-up and maintenance costs. ESS also provides a range of services to facilitate proper application and ongoing performance. These included design (CAD), installation, supervision, inspection and maintenance contracts. As a member of the Martin® Global Network with branches in most major mining centres, we have the technology and proven track record to provide your plant with Total Material Control solutions.

Products: ESS manufacture install and service a comprehensive range of materials handling products, including:

Export Finance and Insurance Corporation About: Export Finance and Insurance Corporation (EFIC) may assist eligible Australian-based companies – contractors and subcontractors – to win and finance export-related contracts wtih targeted financial solutions.

Activity: Provide finance for viable export and onshore export-related deals that have encountered financial barriers.

•

Conveyor Belt Cleaners

•

Custom Conveyor Belt Wash Stations

Website:

•

Return Ploughs

•

Impact Cradles

www.efic.gov.au/contractors

•

Retractable Idler Frames

•

Skirting

Address:

Phone:

•

Belt Trackers

1800 093 724

•

Dust Suppression

•

Air Cannons

•

Industrial Vibrators

Level 10, 22 Pitt Street, SYDNEY, NSW 2000

•

Custom-built Vibrating Feeders and Tables

•

Modular machinery guarding.

Offices: Head Office – NSW

EXTO Pty Ltd

New Products:

Offices: QLD

•

EZI Guard modular guarding

•

Keysafe primary cleaner blades and removal tool

•

Combi-Safe Pre Cleaner Inspection Doors.

Equipment: Both manufacturing facilities are fully equipped with welding, turning, punching, bending, cutting and drilling equipment. In addition, they have their own fully equipped paint shops. ESS also uses state-of-the-art Laser cutting technology.

Other Countries: ESS has exported its products to countries such as New Zealand, New Caledonia, Papua New Guinea, Thailand, India, Israel, Japan, Africa and Europe.

Specialisation: ESS’s core philosophy is Total Material Control TMC® of belt conveyor systems and material flow, with the goal of eliminating spillage and material loss. This is achieved through the supply of high-quality equipment, spare parts, design, advice and customer service, resulting in cleaner, safer, more productive materials handling.

Website:

www.esseng.com.au Offices: NSW Address:

Phone:

1 / 20 Doyle Avenue, UNANDERRA, NSW 2526

02 4272 4422 02 4272 4434

Fax:

Address:

Phone:

Corporate House, Building 6, 2404 Logan Road, EIGHT MILE PLAINS, QLD 4113

07 3340 5183 07 3340 5119

Fax:

Eye Lighting Australia About: EYE Lighting Australia Pty Ltd was formed in 1974, and is one of the oldest lighting companies in Australia under continuous ownership. Today, the operation has expanded with sales offices throughout Australia and New Zealand.

Activity: Over 30 years, EYE Lighting has gained a hard-earned reputation for distributing high-quality, energy-efficient and low-maintenance lighting systems for the mining and industrial sectors. As an Australian-based company, it offers a range of products suitable for Australia’s harsh environments and heavy industrial sites, including a full range of highperformance floodlights, bulkheads, fluorescent fixtures, tunnel and emergency fixtures as well as a variety of high bays and low bays. Lighting fixtures are manufactured from corrosion-resistant materials with most offering very high IP ratings and other technical features ensuring fixtures are built for durability and longevity, making them suitable across a range of industrial uses. EYE Lighting has a proven track record in delivering lighting solutions for the most demanding of applications, including: •

Conveyors and tunnels

•

Corrosive environments

•

Emergency / evacuation lighting

•

Industrial and commercial perimeter areas

•

Manufacturing and workshop areas

•

Mineral processing areas

MESCA MEMBERS DIRECTORY VOL 8 • 63

MESCA SUPPLIERS Industry Buying Guide

•

Mobile plant and equipment

•

Security area / perimeter lighting

Fisher Adams Kelly

•

Stockpiles and port facilities

•

Warehousing and storage areas.

About: Fisher Adams Kelly is a specialist intellectual property (IP) firm practising in the fields of Patents, Trademarks, Registered Designs and IP Strategy in Australia and overseas. With offices in Brisbane, Sydney and Melbourne, we provide services to a number of well-known mining and resource organisations within Australia and overseas.

Products: Floodlights High Bays and Low Bays Bulkheads Emergency Fluorescents Tunnel Lighting Accessories.

We advise and support sole traders, small- to medium-sized entrepreneurs, international institutions and corporate organisations in Australia, New Zealand and overseas.

Activity: Fisher Adams Kelly focuses on the commercial requirements of your intellectual property across various engineering fields, from mining to manufacturing, transportation, optical, automotive, aeronautical, electronic circuits, processing technologies and more. We assist our clients to develop sustainable protection strategies for their business process innovations. We also advise our clients on jurisdiction specific risks and of the advantages and implementation of protection plans.

Other Countries: New Zealand.

Website:

www.eyelighting.com.au Offices: Australian Head Office – QLD Address:

Phone:

15 Industrial Avenue, WACOL, QLD 4076

07 3335 3588 07 3335 3533

Fax:

Email: info@eli.com.au

Fire Protection Technologies (WA) Offices: WA Address:

Phone:

Unit 6, 266 Rutland Avenue, THORNLIE, WA 6988

08 9472 5555 08 9472 5550

Fax:

At Fisher Adams Kelly, we intelligently manage strategies around innovation to maximise opportunity.

Products: At Fisher Adams Kelly, we promise the highest calibre of tailored intellectual property services and commercially practical advice for clients both in Australia and overseas. Our services include: Patent applications and advice; Patent searching; Specification drafting; Patent prosecution; Patent oppositions and disputes; Validity and infringement analysis; Trademark searches; Trademark applications and advice; Trademark prosecution; Trademark oppositions and disputes; Design applications and advice; Design oppositions and disputes; Intellectual Property audits and due diligence; Intellectual Property advisory services.

Specialisation: Fisher Adams Kelly specialises in securing, protecting and pursuing intellectual property rights to produce the very best commercial outcomes for our clients.

Website:

www.fak.com.au Offices: QLD

INSPIRED VISION, FOCUSED ADVICE Patents Trade Marks Designs IP Strategy

Address:

Phone:

Fax:

12 Creek Street, BRISBANE, QLD 4000

07 3229 2655

07 3221 0597

It takes vision to optimize the wealth of our natural resources and Fisher Adams Kelly to protect the value of that vision. Call Fisher Adams Kelly – A leader in patent protection and advice for the resource industry. P: +61 7 3229 2655 E: mail@fak.com.au W: www.fak.com.au Brisbane | Sydney | Melbourne

64 • MESCA MEMBERS DIRECTORY VOL 8

MESCA SUPPLIERS Industry Buying Guide

FK Gardner & Sons Pty Ltd

Flexco Australia Pty Ltd

About:

The FK Gardner and Sons Group (FKG) provides Commercial Construction, Civil, Mining, Development, Plant Hire and Plumbing Services to a wide range of clients who recognise the value of a building partner who is committed to achieving project goals. A proud family of building professionals, FKG was established in 1977. Based in Toowoomba, Mackay, Brisbane, Cairns and Roma, the company has more than 900 employees and have managed many successful projects throughout Australia. From schools to office buildings, substation facilities to nursing homes, we have built a diverse cross section of facilities for both public and private clients within sectors such as Health, Education, Community, Mining and Industrial, Commercial and Retail.

Flexco has been in business over 100 years and is a privately held company. As an industry leader since 1907, Flexco understands that your belt conveyors play a critical role in your productivity. That’s why we constantly strive to make them more productive through a combination of superior products and sound advice. Flexco helps you to evaluate your system’s performance, identify opportunities for improvement and implement complete solutions for a variety of issues along the belt-line to minimise downtime and maximise productivity. Through a combination of superior products and sound advice, our company is growing steadily as we continue to focus our efforts on developing quality products to meet our customers’ needs.

Equipment:

Activity:

400 major plant items, including tower cranes, excavators, scrapers, water trucks, compactors, prime movers etc.

As an industry leader since 1907, Flexco understands that conveyors play a critical role in an operation’s efficiency. Flexco designs and manufactures products that enhance belt conveyor productivity, including mechanical belt fastening systems, primary and secondary belt cleaners, belt ploughs and trackers, impact beds, pulley lagging, transfer point systems and belt maintenance and installation tools. Flexco helps you to evaluate your system’s performance, identify opportunities for improvement and implement complete solutions for a variety of issues along the belt-line to minimise downtime and maximise productivity.

Specialisation: FK Gardner and Sons specialises in a wide range of construction fields including gas, roads, bridges, commercial building and substations. Their dedicated team also has the proven ability to work in remote areas having previously completed work in the North Queensland Cape and Central West Queensland.

Website:

www.fkg.com.au Offices: QLD Address:

Phone:

Fax:

16 Silverton Court, 07 4998 6500 PAGET, QLD 4741

07 4998 6555

Products:

Flagstaff Activity: Project Conception and Delivery Consultants.

Website:

www.flagstaff.com.au Offices: QLD Address:

Phone:

PO Box 3980, LOGANHOLME, QLD 4129

07 3831 2811 07 3839 5370

Flex Force Pty Ltd Offices: WA Address:

Phone:

1 / 175 Hay Street, 08 9425 9999 EAST PERTH, WA 6004

Flexco (Aust) head office, based in Baulkham Hills NSW, includes an office, warehouse and manufacturing facility producing a range of products distributed globally, including pulley lagging, conveyor belt cleaners and ploughs, and belt cleaning tungsten tips. A second office and warehouse also operates in Perth, Western Australia. Incorporating a sales team in New Zealand and a field sales force throughout Australia, Flexco (Aust) is delivering specialist products and knowledge throughout the Australasian region.

Fax:

Flexco designs and manufactures products that enhance belt conveyor productivity, including mechanical belt fastening systems, primary and secondary belt cleaners, belt ploughs and trackers, impact beds, pulley lagging, transfer point systems and belt maintenance and installation tools. Flexco helps you to evaluate your system’s performance, identify opportunities for improvement and implement complete solutions for a variety of issues along the belt-line to minimise downtime and maximise productivity.

New Products: CoreTech heavy-duty conveyor rollers are strong enough to tackle a variety of tough environments. They are made of high-strength, corrosion- and abrasion-resistant composite materials, feature lightweight construction, and emit less noise than their steel counterparts. CoreTech rollers are up to 60 per cent lighter than equivalent steel rollers and last up to three times longer. Lighter weight rollers make for quicker and less-costly installation, and reduce the risk of worker injury. Manufactured and assembled in Australia, Flexco Impact and Slider Beds are engineered to provide containment around load zones and minimise drag on the belt. Flexco Impact Beds absorb the impact from falling material, with the ability to handle 25kg-100kg. Flexco Slider Beds feature hard-wearing CoreTech™ rolls and long-lasting UHMW slider bars. Users can seal load zones in both impact and non-impact areas, providing a holistic solution to a load zone protection system.

Other Countries: Headquartered in Downers Grove, IL USA, Flexco supports global operations through subsidiary locations in Australia, Chile, China, Germany, India, Mexico, Singapore, South Africa, and the United Kingdom.

Specialisation: Flexco specialises in maximising belt productivity by implementing complete solutions to fix conveyor issues all along the belt line, including common issues such as belt mistracking, carryback and spillage. Flexco helps you to evaluate your system’s performance, identify opportunities for improvement and implement complete solutions for a variety of issues along the belt-line to minimise downtime and maximise productivity.

MESCA MEMBERS DIRECTORY VOL 8 • 65

MESCA SUPPLIERS Industry Buying Guide

Website:

Offices: VIC

www.flexco.com Offices: WA Address:

Phone:

1/13 Ernest Clark Road, CANNING VALE, WA 6155

08 9456 2517 08 9456 2571 0459 159 151

Fax:

Mobile:

Flowserve Pump Division About: Flowserve acquired TKL pumps in 2004. Flowserve is the recognised world leader in supplying pumps, valves, seals automation and services to the power, oil, gas, chemical and other industries. With more than 14,000 employees in more than 56 countries, we combine our global reach with a local presence.

Activity: Flowserve Pump Division manufactures and services centrifugal PUMPS, and ALLOY STEEL castings. Pumps for the mining industry include slurry pumps with rubber or hard-iron liners, and water and process pumps. Sales offices and repair centres are located in Perth, Brisbane, Sydney, Wollongong, Melbourne, Traralgon, Darwin, Adelaide, Whyalla, Auckland (NZ) and Christchurch (NZ).

Address:

Phone:

Unit 5 / 3 Faigh Street, MULGRAVE, VIC 3170

03 9574 3100 03 9574 3101

Fax:

FLSmidth About: One source for minerals processing, precious metals recovery and material handling. Over 130 years’ experience, offering metallurgical testing, ore characterisation, detailed design engineering, global procurement, process control, and localised services.

Activity: FLSmidth is your one source for the world’s largest installed base of original equipment, enhanced products, technologies, and services unmatched in the mining and minerals processing industries. Few other technology suppliers can offer such a broad range of equipment and processes for a variety of applications including: crushing, grinding, classifying, flotation, thickening and clarifying, vacuum and pressure filtration, pyroprocessing, slurry handling and material handling, along with OEM quality replacement parts, modernisation services and other after-sale services.

Products: FLSmidth Ludowici’s range of products includes: •

Vibrating screens for mineral processing and aggregate industries

•

Coarse and Fine coal dewatering centrifuges

•

Modular stainless steel, polyurethane, rubber and woven wire screening systems

Terra-Titan sump pumps

•

Hose and rubber lining

Hydro-Titan water pumps

•

Material Handling Equipment

Super-Titan water pumps

•

Abrasion resistant materials-alumina ceramic tiles, trowelable wear resist linings, polyurethane lined pipes etc.

Products: TKL pumps Titan Slurry pumps

Flowserve pumps Ingersoll-Dresser process pumps

New Products:

Durco pumps

•

Global award-winning Reflux Classifier

Pleuger pumps

•

HFC 1300

Worthington pumps

•

VM1650

Thompson pumps

•

Screen Motion Analyser - An FLSmidth Ludowici innovation to assist customers to maintain their equipment and reduce downtime and costs.

Kelly and Lewis pumps.

New Products: Titan Slurry pumps with rubber or hard-iron liners and impellers.

Equipment: Flowserve Pump Division Australia has a large manufacturing facility at Castlemaine (Vic) with an iron and non-ferrous foundry, modern machine tools, and a pump test bay capable of running 3,000kW drives at 11kV. The Davies and Baird foundry in Melbourne makes castings in steel and stainless steel alloys.

Specialisation: Flowserve Pump Division Australia designs, manufactures, repairs and upgrades standard and engineered centrifugal pumps for mining, oil and gas, energy, water and industrial applications.

Website:

www.tkl.com.au www.flowserve.com

66 • MESCA MEMBERS DIRECTORY VOL 8

Equipment: Ludowici’s manufacturing capacity includes: •

specialised wedgewire screen manufacturing machines

•

polyurethane lined pipe spinning machines capable of up to 600mm N.B. by 10,000mm long

•

ceramic spun lined pipes up to 550mm N.B. by 6000mm long.

Other Countries: FLSmidth is active throughout the world with local presence in more than 50 countries.

Specialisation: FLSmidth specialises in products that provide enhanced performance, increased recoveries, lower energy consumption, and proven reliability that is unmatched in the mining and minerals processing industry.

Website:

www.ludowici.com.au

MESCA SUPPLIERS Industry Buying Guide

Offices: Global Head Office – QLD Address:

Phone:

Fax:

67 Randle Road, PINKENBA, QLD 4008

07 3121 2900 07 3212 2988

Furmanite About: For over 80 years, Furmanite has been a world leader in the provision of on-site services to clients in the mining, petrochemical, offshore oil and gas, powergen, marine, pulp and paper and general engineering industries.

Forgacs Engineering Offices: NSW

We operate from over 140 offices globally and from 10 locations throughout Australia.

Activity:

Address:

Phone:

Furmanite Australia Pty Ltd is committed to working with its clients to “Maximise Asset Uptime”.

50 Fitzroy Street, CARRINGTON, NSW 2294

02 4978 9100

Our services include:

Fulton Hogan Construction

On-site machining including x-y and circular milling, flange facing, line boring, grinding and linishing, journal turning, pipe cutting, PSIM flange management systems, controlled bolting, valve repair and Trevitest on line PSV/PRV testing, hot tapping and line stopping, pipe freezing, on-site preand post-weld heat treatment, composite repairs, on line live leak sealing, line isolation and localised hydrostatic testing.

About:

Products:

Fulton Hogan is a $2-3 billion pa business with over 5,000 employees, yet we remain a family- and employee-owned company. Since commencing in 1933, our aim has been to work collaboratively with our customers to find the best construction solutions because we desire to have a positive longterm relationship with our customers.

SUPERBOLT mechanical tensioners PILGRAM hydraulic coupling bolts EQUALIZER Flange spreading and alignment equipment KROIL penetrating oil SILK portable machine tools

Activity: Civil Construction for Energy and Mining Infrastructure Our work includes earthworks, stabilisation, base construction, heavy-duty pavement and hardstands, dams and water infrastructure, electrical works, rail, bridges and other associated structures.

Products:

SIGRI high-temperature gaskets IPSCO pipeline hot tap and line stop fittings.

New Products: Heat treatment services Valve One valve repair management services

Dust suppression (DustBloc)

Furma Wrap pipe repair systems

Stabilisation (BaseBind)

Line Isolation and Localised Hydrostatic Testing.

Hardstands (RIGIPHALTE and Heavy-duty Asphalts)

Equipment:

Cold Mix Asphalt (EZ Street).

Complete range of on-site machining, hot tap, line stop, heat treatment, leak sealing, valve repair and testing equipment.

Other Countries: New Zealand.

Other Countries:

Specialisation:

Worldwide.

Stockpiles, laydown areas and footings for specialist mechanical and electrical equipment, such as wind turbines, conveyors, stackers and reclaimers.

Specialisation:

Ports and Heavy-duty Pavement Hardstand Construction Airports and Runways Energy and Mining Infrastructure.

Website:

www.fultonhogan.com.au Offices: National – VIC Address:

Phone:

Fax:

Level 1, Building 7, 03 9340 6200 03 9340 6299 572 Swan Street, RICHMOND, VIC 3121

On-site machining services on draglines, shovels and excavators, stacker/ reclaimers, conveyors, turbines, generators etc. •

On-site heat treatment

•

On-site valve repair and testing

•

Pipeline maintenance and support services including hot tap, line stop and pipe freezing

•

Flange Management services including on-site bolting, torquing and tensioning

•

Live under pressure leak sealing including high-pressure and hightemperature applications

•

Composite wrap repairs to pipelines and structures

•

Heat exchanger and condenser repair services

•

Engineering consultancy and design services.

Website:

www.furmanite.com

MESCA MEMBERS DIRECTORY VOL 8 • 67

MESCA SUPPLIERS Industry Buying Guide

Offices: QLD Address:

Phone:

Fax:

19 Gibbs Street, WYNNUM, QLD 4178

07 3396 2502 07 3893 2365

G & S Engineering Services About: G&S CREDENTIALS: •

A robust “zero exposure” safety culture embedded across all G&S management and employees.

•

Quality world-class outcomes to agreed timelines and financial parameters.

•

Effective teamwork, communication and care with every project – big, or small.

•

Passionate personnel who are prepared to do whatever it takes to achieve the safest, best possible outcome for the customer.

Activity: Provides a wide range of services associated with manufacturing, construction, electrical and maintenance of both fixed and mobile plant and machinery for the resource, energy, port and infrastructure industries.

Products: Delivers professional manufacturing, construction, electrical and maintenance services by providing industry-leading, responsive teams with targeted skills to meet the demands of our clients.

Specialisation: The Maintenance Division supports our clients through the delivery of industry-leading asset management services. We offer both mechanical and electrical services, on-site and in our workshops. While the majority of our activity has been confined to the Bowen Basin, we have continued to further develop our New South Wales operations (based in Muswellbrook) and, through our Electrical business involvement in mineral plant construction, we are also operational in North Queensland. Our focus is to provide the safest, highest quality, best value asset management option. Over the past 12 months, G&S has continued to forge strong relationships with our clients and present ourselves as the partner of choice. In Construction and Manufacturing, the continued success in delivering quality outcomes has firmly established G&S as a partner of choice for fabrication, construction, relocation, and decommissioning of major industry assets. The strength of the C&M Division is achieved through a highly skilled, experienced and dedicated team, who have proven they can operate at any site within Australia.

Garlock Sealing Technologies About: Garlock specialises in the sale and support of static and dynamic sealing products to customers in all industrial sectors. Products are manufactured and tailored to focus on high-performance outcomes when used for demanding applications; often in aggressive or hazardous environments. With over 120 years of global experience, Garlock continues to bring new and innovative products to an Industrial Market demanding higher performance and longer life. The focus on Conservation and OH&S activities in all industrial sectors has bought even greater demands on the sealing industry. Garlock takes pride in consistently meeting these demands.

Activity: Garlock supplies engineered sealing products to Australian and International end users, with strong technical added value, using brandleading products, including our own, which are sold directly or through Distribution. While we supply a range of highly engineered products to suit critical applications, we also supply commodity products that meet lower specification requirements. In Australasia, Garlock Pty Ltd, operates from six strategically located sales and stocking outlets in Sydney, Perth, Melbourne, Adelaide, Gladstone and Auckland. Manufacturing facilities are located in Sydney, Perth and Gladstone, with regional offices having gasket cutting capability. From these locations, we can quickly access customer sites in order to review sealing requirements, and provide necessary items. Using either our local Engineering capabilities, or when needed, our Overseas resource base, we are able to design and manufacture sealing solutions required. With ISO-9001:2000 accreditation, Garlock can meet all customerbased quality requirements. Training is an important aspect of product support, made available to all customers when required, along with on-site assistance in product application and installation.

Products: Metal and spiral-wound gaskets, Compressed sheet and cut gaskets, GYLON® high-performance restructured PTFE sheet and gaskets, Sheet rubber products, Oil seals and bearing isolators, Braided pump and valve packing, Expansion joints (Fabric Duct Joints, Elastomeric, Metallic), HydraJust Sealing System, Pikotek insulating seals and flange sets, Crown Bush stuffing box flow modifier, Mechanical Seals for all duties, Heavy-duty Slurry Seals, Repairs for all types of mechanical seals, Industrial Textiles, Inflatable seals, Pump repair.

New Products: New products are constantly being added to the already wide range of sealing solutions. Some relatively different products include: Highperformance lipseals with Mill-Right long life Elastomers, Split Bearing Isolators, GPA Slurry Seals, “Flange Free” revolutionary Anti-stick gasketing materials, Improved Gylon restructured PTFE material, HydraJust and Crown Bush Sealing Systems for improved life and massive water savings.

Other Countries:

www.g-s.com.au

Garlock has its Head Office in the United States, with operations in Mexico, Brazil, France, Canada, Columbia, South America, Germany, Italy, Russia, UK, China, Singapore and New Zealand. Some 15 global operations employ more than 1800 people who also support distributors helping customers in 75 countries.

Offices: QLD

Specialisation:

Website:

Address:

Phone:

Level 3, Suite 4, 320 Adelaide Street, BRISBANE, QLD 4001

07 3012 3203

Headquartered in Palmyra, NY, Garlock Sealing Technologies is an EnPro Industries, Inc. company (NYSE: NPO). It operates the most extensive testing facilities in the industry. Continued investment in research and development, innovative new products, production facilities, customer support and environmental initiatives will assure Garlock retains its global leadership in fluid sealing technologies.

Website:

www.garlock.com.au

68 • MESCA MEMBERS DIRECTORY VOL 8

MESCA SUPPLIERS Industry Buying Guide

Offices: Head Office – NSW

New Products:

Address:

Phone:

Unit 6, 165 Rookwood Road, YAGOONA, NSW 2143

02 9793 2511 02 9793 2544

Fax:

Website:

www.gh.com.au

Gateway Hydraulics About: Gateway Hydraulics Pty Ltd is a fully Australian-owned and operated hydraulic engineering company, located in Brisbane and on the Gold Coast. Since being established in 1991, Gateway Hydraulics has been providing hydraulic design, sales and service to the Industrial, Marine, Mobile Equipment and Agricultural sectors.

Activity: Gateway Hydraulics designs, manufactures and maintains hydraulic systems, components and cylinders.

Products: Gateway Hydraulics is a distributor for Bosch Rexroth. •

Hydac

•

Permco

•

Pitts Industries

•

Ryco

•

Sauer Danfoss

•

Wilkes and McLean

•

Volz.

Gateway Hydraulics is now the exclusive Australian and New Zealand distributor for Pitts Clutches and Wilkes and McClean hydraulic suppressors.

Offices: QLD Address:

Phone:

63 Alexandra Place, MURARRIE, QLD 4172

07 3890 7777 07 38907888

Fax:

Generate PR Offices: QLD Address:

Phone:

Suite 2, 248 Quay Street, WANDAL QLD 4700

07 4927 5696

Mining Georg Fischer Piping Systems has the solution for safe conveyance of water, slurries and chemicals - around mine sites. From plastic pipes & fittings, jointing technologies, valves, automation and measurement & control. Contact Us:

t: 02 9502 8000 or 1300 130 149 f: 02 9502 8090 australia.ps@georgfischer.com www.georgfischer.com.au

324541A_George Fischer | 2065.indd 1

2:10 PM MESCA MEMBERS DIRECTORY31/10/13 VOL 8 • 69

MESCA SUPPLIERS Industry Buying Guide

Geofabrics Australasia Pty Ltd

Global Cranes

Offices: NSW

About:

Address:

Phone:

Fax:

9 Cunningham Street, MOOREBANK, NSW 2170

02 6025 8577 02 6025 8076

Georg Fischer Pty Ltd About: Georg Fischer Piping Systems are dedicated to the manufacture, supply and marketing of plastic piping systems for the safe and secure conveyance of liquids and gases. One-stop shopping at GF Piping Systems with over 40,000 products for diverse applications and specialised markets: from pipes and fittings to valves and measurement instruments, and the respective jointing technologies. Tailor-made solutions for any application in which fluids or gases are conveyed, whether for mining, industrial, chemical, water or utilities applications.

Activity: Georg Fischer Piping Systems.

Products: Pipe, valves, fittings, jointing technologies and tools, actuation and sensors, and instruments. Materials: UPVC, CPVC, PE, PP, PVDF, Nylon, PB.

Specialisation:

Freo Group consolidates the operations of Freo Group Pty Ltd and Global Cranes Pty Ltd; these two entities support the group’s regional focus in Western Australia, Northern Territory, Queensland and New South Wales. Freo is a reputable provider of crane hire, heavy lift, oversize transport, warehousing and logistics to industry across Australia. Freo Group provides services to some of Australia’s leading ”Blue Chip” client base, including BHP Billiton, Rio Tinto, Woodside, Fortescue Metals Group, Bechtel Corporation, John Holland, Thiess, Anglo American, Downer EDI, Baulderstone, Cement Australia, ABI Group, Energex, Peabody Energy, Seymour Whyte, AWX Mining Support Services etc. In early 2012, Marmon Crane Services Inc, a Berkshire Hathaway Company, acquired a controlling interest in Freo Group Ltd and Global Cranes Pty Ltd. The acquisition has paved the way for Freo Group’s ongoing expansion and access to “world best” practices, systems and processes of an international conglomerate.

Activity: Freo Group is an Australian Company providing crane hire, heavy lift, oversize transport, logistics, materials handling, warehousing and storage, and quarantine cleaning services. Freo provide Australia-wide Crane Hire, including Mobile and Crawlers cranes up to 1250 tonne capacity, 15t – 25t capacity Pick and Carry Franna cranes, 40t – 500t capacity All Terrain cranes, 80t – 750t Crawler cranes, 20t – 145t Rough Terrain cranes. All depots provide maintenance and repair capabilities, and value-added support comprising of Transport services, Rigger/Dogman labour hire, Technical services, Engineering and lift planning analysis. Freo Logistics combines the Company’s core competencies in lifting solutions, transportation, heavy haulage and materials handling to provide a total project materials handling support service.

Ability to find dedicated piping solutions for different applications.

Products:

Website:

www.georgfischer.com.au

Australia-wide Crane Hire: Mobile and crawlers up to 1250 tonnes capacity, 15t – 25t capacity Pick and Carry Franna cranes, 40t – 500t capacity All Terrain cranes, 80t – 750t Crawler cranes, 20t – 145t Rough Terrain cranes.

Offices: SA

New Products: The combined assets of Freo Group are on average under 3 years old and stringently maintained “in-house”.

Address: 1 Preston Avenue, BRIGHTON, SA 5048

Specialisation: Crane Hire, Heavy Lift, Oversize Transport, and Project Logistics and Warehousing.

Georgiou Group Pty Ltd Offices: QLD Address:

Phone:

10 Browning Street, WEST END, QLD 4101

07 3319 4500 07 3319 4545

Fax:

70 • MESCA MEMBERS DIRECTORY VOL 8

Website:

www.freogroup.com.au Offices: Head Office – WA Address:

Phone:

Jakovich Centre, 4 McGrath Road, HENDERSON, WA 6166

08 9499 9600 08 9499 9696

Fax:

MESCA SUPPLIERS Industry Buying Guide

Global Manufacturing Group

•

6 Mazak CNC lathes with mill turn facilities and machine centres up to 5 axis

About:

•

Fully automated Band Saw

•

Punch and Shear

Premier Australian metal manufacturing company dedicated to customer service, quality, technology, equipment and infrastructure.

•

MIG, TIG, Robotic and Automated welding systems

Quality Management System certified to ISO 9001:2008 CERT No:QEC25239

•

Equipped to handle jobs up to 50 tonne

Total turnkey operation, with internal control over all facets of the manufacturing process from design to delivery.

•

Forklifts and overhead cranes

•

Delivery trucks.

Established since 1982, GMG operates from two sites: Maryborough and Gladstone in Central QLD.

Equipment:

GMG boasts over 7000 square metres of pristine and spacious factory area admired for its orderliness, with modern world-class equipment and management principles.

•

Autocad LT, Unigraphics NX4, Bysoft, Sheet and Plate development

•

6KW Bystronic Bystar L 6025 Laser Cutter

•

5.2KW Bystronic Byspeed 3015 Laser Cutter

GMG is a Registered Training Organisation (RTO) for Forklift Training and Licences.

•

Press Brakes to 500 tonne x 6m long in 2, 3, and 5 axis CNC machine configurations

Activity:

•

Rolling capacity to 16mm over 3m

Global Manufacturing Group offers Laser Cutting, Machining, Fabrication, Press and Form, Sandblast and Paint, Registered Training Organisation (RTO) for Forklift Training and Licences.

•

Guillotining of mild steel, stainless steel and aluminium.

•

Mazak CNC lathes with mill turn facilities and machining centres up to 5 axis

•

Fully automated Band Saws

•

Punch and Shear

•

MIG, TIG, Robotic and Automated welding systems

•

Equipped to handle jobs up to 50 tonne

•

Forklifts and overhead cranes

•

Delivery trucks.

Products: Global Manufacturing Group services industries in mining, engineering, construction, transport, rail and infrastructure. •

Autocad LT, Unigraphics NX4, Bysoft, Sheet and Plate development

•

6KW Bystronic Bystar L 6025 Laser Cutter

•

5.2KW Bystronic Byspeed 3015 Laser Cutter

•

Press Brakes to 500 tonne x 6m long in 2, 3, and 5 axis CNC machine configurations

•

rolling capacity to 16mm over 3m

•

Guillotining of mild steel, stainless steel and aluminium

Specialisation: Full Turnkey Operation – Design to Delivery of Manufactured Metal Components.

105 Hanson Road Gladstone, QLD 4680

Lvl 3, 8 Gardner Close Milton, QLD 4064

110 Brisbane Road Labrador, QLD 4212

Lvl 1, 43 River Street Mackay, QLD 4740

Tel: 07 4976 0400 Fax: 07 4976 0451

Tel: 07 3510 3400 Fax: 07 3510 3451

Tel: 07 5557 6100 Fax: 07 5557 6199

Tel: 07 4961 8200 Fax: 07 4961 8211

www.golding.com.au 324540A_Golding | 2065.indd 1

MESCA MEMBERS DIRECTORY6/09/13 VOL 12:29 8 • PM 71

MESCA SUPPLIERS Industry Buying Guide

Website:

www.gmqld.com.au

www.golding.com.au

Offices: QLD

Address:

Phone:

11 Dalrymple Drive, GLADSTONE, QLD 4680

07 4979 3068 07 4979 3075

Fax:

Golding Contractors Pty Ltd About: Golding is a Queensland-based company that has evolved from humble beginnings in 1942 into one of Queensland’s largest privately owned civil infrastructure and mining services companies. Today, we have offices located in Gladstone, Brisbane, Mackay and the Gold Coast.

Address:

Phone:

Fax:

L3/8 Gardner Close, 07 3510 3400 07 3510 3451 MILTON, QLD 4064

Halley & Mellowes Pty Ltd Activity: The HMA Group of Companies manufactures, sells and services a wide range of capital and operational equipment. Industries served include mining, processing, materials handling, water management, power generation, and oil and gas.

We deliver a diverse range of services through two operating divisions. The civil infrastructure division is centred on earthworks, concrete and marine capabilities. The mining division operates in the coal and metalliferous sectors offering a full range of mining services.

We can provide state-of-the-art industrial equipment and also offer customers sound advice, consultation and technical backup, with a team of qualified engineers with extensive product training and experience. We can offer a complete service, from equipment selection, through to installation, commissioning and maintenance.

Our success is demonstrated through our long-term client relationships. A major proportion of the work we undertake is repeat business, negotiated because of a strong client contractor relationship and resultant quality of delivery.

With offices and service facilities located around Australia and in New Zealand, we are ready to assist you from the project inception stage, right through contract engineering to installation, commissioning and full maintenance support.

There is a recognition that the overall success of the business is directly impacted by the people we engage, develop and reward. We have a focus on delivering projects with our own people and directly employ in excess of 1300 people in the Golding business.

Products: Halley & Mellowes: Material Handling systems and Equipment including train loading, truck loading, stockpile reclaim, chutes, gates, and stackers.

Golding has a full suite of integrated business systems in place that are fit-for-purpose, drive effective behaviours and contribute to consistent successful project performance.

Greenbank & Cermatech: Abrasion-resistant products including piping, tiling and specialised services.

Activity: Civil Infrastructure, Mining Services and Marine Works.

POGC: Industrial instrumentation and process control products including burst discs, gas analysers, oil in water detection, flame and gas detection and suppression systems.

Products:

Diamond Power: Boiler cleaning technology and specialist camera systems.

Civil Infrastructure Golding has significant operations in the civil infrastructure sector with particular focus on regional Queensland. We undertake all aspects of infrastructure development involving major earthworks, marine and concrete structures. This includes new rail lines, roads, bridges, ports, wharves, transport hubs, subdivisions and dams, as well as large-scale mine infrastructure works including bulk earthworks, haul roads, tailings dams and site services. In addition, Golding has the capability and resources to manage major site development works for infrastructure projects such as power stations, processing plant facilities and industrial precincts. On large civil infrastructure projects, Golding has the flexibility to utilise its mining fleet capability to maximise time and cost efficiency outcomes for the project. Mining Services Golding is a key contractor to the Queensland mining industry in the coal and metalliferous sectors. As a quality mining service provider to a diverse range of clients, Golding operates in some of Queensland’s largest open-cut mines with mine operations moving in excess of 80m BCM of material per year. Golding differentiates itself from other major mining contractors by providing a flexible, best for project mining service, working in a collaborative manner with clients to help deliver shared goals and aspirations. We continue to provide clients with the option to engage Golding to develop and operate the mine, or provide a focused mining service, such as bulk overburden removal, direct mining or mine rehabilitation work.

72 • MESCA MEMBERS DIRECTORY VOL 8

Valveco: Complete range of valves and associated items for all industries.

Techniplan: Material Handling, rail maintenance equipment, vehicle wheel washing systems and specialised engineering and studies. Measurement Resources: Measurement and control solutions for industry. Geotechnical Systems: Ground monitoring equipment for the mining and geotechnical industry. Manufacturer of sootblowers and controls, mineral processing equipment, valves, guages, analysers, materials handling equipment, abrasive-resistant linings, road rail equipment.

Other Countries: Indonesia, New Zealand, New Caledonia, PNG.

Website:

www.hmagroup.com.au Offices: NSW Address:

Phone:

13 Sirius Road, LANE COVE, NSW 2066

02 9428 7300 02 9428 7300

Fax:

MESCA SUPPLIERS Industry Buying Guide

Hard Metal Industries Pty Ltd

Hastings Deering (Australia) Ltd

About:

Established in Australia in 1999, HMI has grown to a staff complement of almost 30 people, all ready to deliver the quality and service customers require.

Hastings Deering is one of the world’s largest Caterpillar dealer networks; with 23 branches, 26 sub-branches and more than 4,500 employees. We sell, service, rent and support Cat® heavy equipment and machinery, offering complete earthmoving and mining solutions in Queensland, the Northern Territory, Papua New Guinea, New Caledonia and the Solomon Islands. The company also has a large range of Caterpillar diesel and gas engines (sold by Energy Power Systems Australia).

Through partnerships and exchange of information, we pride ourselves in working together with our clients to develop solutions to their drilling and wear problems.

Activity: Manufacture tungsten carbide and Polychrystaline diamond tools for CBM, Tunnelling, foundation, water and gas drilling, longwall and continuous mining.

Products: Tungsten tipped wear tools, specialised wear protection and drilling tools for methane extraction, design engineering and full repair service on the tools we supply.

New Products: Australian designed and engineered under reamers, hole openers and eccentric bits for methane drilling and exploration.

Equipment: CNC turning, wire cut and 5 axis milling. Specialised heating and brazing operations.

Other Countries: South Africa; New Zealand.

Specialisation: Specialised PDC tools for the coal bed methane industry.

Website:

www.hardmetalindustries.com.au Offices: NSW Address:

Phone:

Unit 3 / 7 Kilto Crescent, GLENDENNING, NSW 2761

02 9625 8352 02 9625 8642

Fax:

IN MINING.

Hastings Deering pursues a disciplined sustainability agenda. Safety is our number one strategic, critical success factor and we have embedded sustainability practices in many of our services. We provide integrated solutions for end-to-end equipment management; offering superior service and product support, fast and efficient parts fulfilment, engineering services, training and assessment services, safety consultancy, condition monitoring, hard chroming services, rebuilds, and world-class remanufacturing capabilities.

Activity: Hastings Deering has exclusive distribution rights for the sale and rental of Caterpillar heavy equipment, parts and service support in our territory. Caterpillar offers the broadest product line in the mining industry and Cat® machines have the power and versatility to increase productivity, and improve operating costs and efficiency through excellent technology integration and performance. In 2011, Hastings Deering became the first Cat dealer to take on the former Bucyrus distribution business. Supporting the former Bucyrus product range is the dedicated Excavation and Underground Coal Support (EUCS) group operating out of Mackay, with workshops that repair and rebuild all components of the entire fleet of equipment offered, as well as manufacturing components such as dragline boom feet, boom and masts. Hastings Deering is committed to backing Cat products with cost-effective, quality controlled and fast turnaround service, and has invested significantly in plant, tooling and diagnostic testing equipment, as well as our most valued asset – people. Our branches provide a range of specialised service facilities incorporating undercarriage repair, welding and machining, engine repair and dynamometer testing, transmission repair and testing, hydraulic component repair and testing, complete machine dealer rebuilds and Caterpillar certified rebuilds. Highly effective coverage by field servicemen complements these activities in the field wherever your equipment operates, ensuring a fast response to your service requirements on site. Resident and Field Servicemen operate a fleet of fully equipped vehicles with the latest diagnostic tooling. Our service departments are supported by a network of technical advisers who have direct access to Caterpillar Australia and the worldwide dealer system. This provides an exceptional response on all forms of technical and engineering enquiries relating to products, procedures and design specifications.

• New and Used Equipment • Technology Solutions • Rental • Equipment Management Service • New and Used Parts • Finance

QUEENSLAND BRISBANE CAIRNS EMERALD GLADSTONE GOLD COAST MACKAY MOUNT ISA ROCKHAMPTON SUNSHINE COAST TOOWOOMBA TOWNSVILLE NORTHERN TERRITORY DARWIN ALICE SPRINGS GOVE For all your short and long term mining rental needs

CALL 1800 228 736 For all your new and used mining equipment needs

CALL 131 228 www.hastingsdeering.com.au

© 2012 Caterpillar. All rights reserved. CAT, CATERPILLAR, their respective logos, ‘Caterpillar Yellow’, the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

325691A_Hasting Deering | 2065.indd 1

8/11/13 1:58 PM

MESCA MEMBERS DIRECTORY VOL 8 • 73

MESCA SUPPLIERS Industry Buying Guide

Products:

Support Equipment

Surface Mining The Cat product line-up for surface mining is unmatched and includes articulated trucks, belt systems, draglines, drills, electric rope shovels, highwall miners, hydraulic shovels, mining trucks, motor graders, track-type tractors, wheel dozers, wheel loaders and wheel tractor scrapers. Underground Mining Caterpillar manufactures underground products for longwall, room and pillar and hard rock applications. Longwall Caterpillar is the global market leader and supplier of complete longwall systems. All over the world, Cat equipment and systems are meeting the demands of underground mining under the most stringent conditions. Adapted to the challenges faced by today’s mining customers, Cat customised systems range from hydraulic roof supports, automated plow systems, shearers, face conveyors and drive systems to automation and roof support carriers. Caterpillar delivers your system of choice, from low to high seam heights, for the longest longwalls and highest production demands. Room and Pillar Caterpillar offers a broad line of room and pillar products that have undergone extensive redesign and re-engineering to deliver the highest performance available in the marketplace. Products include Continuous Miners, Feeder Breakers, Haulage Systems, Roof Bolters and Utility Vehicles. Hard Rock Caterpillar offers a range of underground loaders and trucks to suit high production demands and lower cost per ton. Underground hard rock mining is a demanding application for any equipment. Cat underground drills, loaders and trucks stand the test of time in a wide range of difficult conditions. They incorporate the latest technology and are proven to deliver productivity, reliability and operator comfort. Safety is also an important element in the underground mining machine design philosophy of Caterpillar and products are engineered with safety in mind.

As the world’s leading manufacturer of equipment for the construction industry, Caterpillar offers a variety of equipment not specifically targeted for the mining industry but important for a productive operation. From backhoe loaders, water trucks and tool carriers to on-highway trucks and telehandlers, there’s a Cat product to meet every need. Power Generation Cat engines are used extensively to power mine sites and equipment. From diesel and gas generator sets to uninterruptible power supplies, automatic transfer switches and electrical switchgear, there’s a Cat solution to deliver the power systems and support you need. Cat diesel generator sets, natural gas generator sets, bio-fuel generator sets and alternative fuel generator sets provide emergency, stand-by, prime and continuous power to customers around the globe. Technology Caterpillar provides mining technology products for open pit and underground mine applications. Technologies that enable fleet management, drilling and blasting, loading, hauling, dozing, truck assignment, material tracking and operator management. Miners are always looking for ways to enhance mine site safety, reduce costs, improve profitability and boost efficiency. Cat® MineStar™ System provides the most comprehensive suite of mining technology products in the industry. It consists of a number of configurable capability sets that allow you to scale the system to your mine site needs. Cat MineStar System helps you manage everything from material tracking to sophisticated real-time fleet management, machine health systems, autonomous equipment systems and more. The capability sets – Fleet, Terrain, Detect, Health and Command – can be used in combination or individually to allow your operation the flexibility and scalability it needs to be more productive, efficient and safe. Cat MineStar System lets you integrate products, processes and people like never before, so you can define what next generation means for your operation.

New Products:

new logo

Designed to be the most productive and efficient ultra-class hydraulic shovel available, the Cat® 6120B H FS delivers highly productive threeor four-pass loading of ultra-class mining trucks. Innovative hybrid technologies cut fuel use per ton by an estimated 25% – through the use of hydra-electric regenerative technologies and a unique energy storage system. An operating weight of approximately 1,270 tonnes and engine output of about 4,500 hp (3360 kW) enable the shovel to handle dipper sizes of 46 to 65m3, depending on material density. HORIZON

Offering strong performance, safety, ease of operation and maintenance, and superior reliability, the Cat® MT5300D AC 320 ton-capacity mining truck integrates a Cat C175-16 engine and Cat 360T AC electric drive system with the proven Unit Rig MT Series trucks. The engine is proven in Cat large mining trucks, and the Cat AC drive system features industry-leading dynamic retarding capacity combined with four-corner wet disc brakes.

GVR

Other Countries: Papua New Guinea; New Caledonia; The Solomon Islands

LIGHTNING NDC

ECLIPSE

Specialisation: Hastings Deering provides end-to-end equipment management solutions. We specialise in the sale, rental, support and servicing of new and used Caterpillar earthmoving, mining and construction equipment, and aftersales support for Cat diesel and gas engine

RETVA

Website:

VMH

Our Outstanding ‘Fit and Forget’* and Standard Product Portfolio includes: » HORIZON* 15-38kV Dead Tank Outdoor Circuit Breaker » ECLIPSE* 12kV Fixed Indoor Metal-enclosed Switchgear » GVR* 15-38kV Pole Mounted Recloser » VMH12 12kV Withdrawable Indoor Metal-enclosed Switchgear

» RETVAC Vacuum Circuit Breaker up to 13.8kV to retrofit older SWS, Brush and other brands oil circuit breakers » LIGHTNING NDC* up to 1800V DC Withdrawable Indoor Metal-enclosed Switchgear

HAWKER SIDDELEY SWITCHGEAR PTY LTD www.hss-ltd.com (a wholly-owned subsidiary of Hawker Siddley Switchgear Ltd, UK) MAIL: PO Box 36, Kallangur, QLD 4503, Australia OFFICE/FACTORY: 2 Frawley Avenue, Narangba, QLD 4504, Australia TEL: +61 (0)7-3888 1455 | FAX: +61 (0)7-3888 3241 | EMAIL: sales@hssaustralia.com

327412A_Hawker Siddeley | MEMBERS 2065.indd 1 74 • MESCA

DIRECTORY VOL 8

11/11/13 10:15 AM

www.hastingsdeering.com.au Offices: Head Office – QLD Address:

Phone:

Fax:

PO Box 46, ARCHERFIELD, QLD 4108

131 228

07 3365 9420

// B E C A U S E Y O U D O N ’ T D O T H I N G S B Y H A LV E S

Hitachi AC Drive dump trucks. Built to match Hitachi excavators. Our trucks and excavators are brothers. They’re designed by the same engineers, assembled in the same factories, and built to the same quality. If you’re running a Hitachi excavator, then you’ve already experienced half of the Hitachi advantage. Now it’s time to see what a fleet can do.

MESCA SUPPLIERS Industry Buying Guide

Hawker Siddeley Switchgear

Hillier Engineering Services

Offices: QLD

About:

Address:

Phone:

Fax:

PO Box 36, KALLANGUR, QLD 4503

07 3888 2333 07 3888 3241

HES Winches Australia Pty Ltd About: HES Winches Australia is an Australian business created solely to provide quality winches and superior service to our clients. We work with you to find the right solution. We supply quality leading brand winches and our aftersales service is second to none. HES Winches Australia understands the demands of industry and we are ready to provide your company with quality winch solutions. We have successfully negotiated with the world’s leading manufacturers to bring you the ultimate winch range with the world’s best technology. HES is respected across Australia for delivering quality products with professional advice and outstanding service. HES Winches Australia will bring that philosophy to our winch customers.

Hillier Engineering Services are machining specialists that have been operating for over 25 years. We offer quality machined components strictly in compliance with our clients’ drawings and specifications. We are ISO 9001:2008 accredited. Our experienced team is highly skilled and trained to ensure our clients receive a highest level of service, and we deliver components that meet their specifications and on time delivery. We offer very competitive pricing and lead times.

Activity: Our services include CNC machining, manual machining and fabrication.

Products: Some of our manufactured products include: Shafts, Drive Pulleys, Valve Bodies, Gear Box Housings, Crusher Parts, Pins, Bushes, Special Hydraulic Cylinders.

Specialisation: CNC Machining, Manual Machining, Fabrication, Assembly, Reverse Engineering and Inspection Services.

Website:

Activity:

www.hes.net.au

HES Winches Australia designs, manufactures and supplies quality AC electric, hydraulic, pneumatic and hand operated winches, wire rope products, sheaves and accessories.

Offices: QLD

Products: HES Winches Australia is a master distributor for TWG – owners of such iconic hydraulic winch brands as Pullmaster, DP, Lantec and Tulsa Winch plus for a European flavour in Industrial AC electric and planetary hydraulic winches. We have teamed up with progressive Italian manufacturer, Dinamic Oil Spa.

New Products: HES Winches Australia Pty Ltd OZWINCH AC Electric Winches

Address:

Phone:

15 Bradman Street, ACACIA RIDGE, QLD 4110

07 3344 2255 07 3344 4766

Fax:

Hitachi Construction Machinery (Australia) Pty Ltd About:

Gebuwin Industrial Hand Winches DualLift Man Riding and Material Hoists HES Winches specialise in custom winch design and manufacture Wire rope products, sheaves and accessories.

Other Countries: Australia, New Zealand, Papua New Guinea and Indonesia.

Specialisation: Winches and Winch Accessories Spare Parts and Service.

Hitachi Construction Machinery (Australia) Pty Ltd (HCA) is a subsidiary of Hitachi Construction Machinery Co. Ltd (Japan) and part of the global and diversified Hitachi Ltd group. This allows HCA to draw on world-class research to implement industry-first technologies across products and services. HCA is the exclusive distributor of Hitachi, Bell and John Deere products in Australia, which are considered three of the most renowned and innovative Original Equipment Manufacturer brands in the world. It delivers worldclass machine sales, service and parts support to Australian customers across the mining, construction, quarry, forestry, material handling and recycling industries through its wholly-owned national branch network. Founded on a commitment to contribute to society through the development of superior, original technology, Hitachi globally supports major environmental and social projects. HCA is proud to sponsor the Australian Mining’s Prospect Awards and recognise companies and individuals dedicated to safety and environmental sustainability within the mining industry.

Website:

www.heswinches.com.au Offices: QLD Address:

Phone:

PO Box 62, BROWNS PLAINS, QLD 4118

1300 946 242 07 3803 1532

Fax:

HCA products continually advance in safety innovation and reducing environmental impact. Hitachi mining equipment utilises features to lower fuel usage and reduce emissions. Creating a safe work environment is a key priority for HCA. Our machinery boasts industry-leading safety features and our work practices adhere to the highest industry standards.

Products: Hydraulic excavators, rigid dump trucks, articulated dump trucks.

76 • MESCA MEMBERS DIRECTORY VOL 8

MESCA SUPPLIERS Industry Buying Guide

Howden Australia

Website:

www.hcma.com.au

About:

Offices: QLD Address:

Phone:

Fax:

121 Coulson Street, WACOL, QLD 4076

07 3423 5600 07 3423 5699

Howden supplies fans, rotary heat exchangers, compressors and gas cleaning equipment throughout the world to key industries, including power generation, petrochemicals, steelmaking, mining and cement production, which demand the highest levels of performance.

Products: Custom-Engineered Fans, Blowers, mine ventilation fans, Air Preheaters, Turnkey Projects.

HMG Hardchrome

Website:

www.howden.com.au

About: HMG Hardchrome is Australia’s answer to the chrome-plating industry. A division of the Heavy Maintenance Group since August 2007, HMG Hardchrome was established in 1959 and has since grown into one of the most technologically advanced chrome-plating companies in the world.

Offices: NSW

Activity: HMG Hardchrome Pty Ltd is Australia’s market leader in Hardchrome plating and general engineering. Over the past 50 years, we have continually strived to improve our reputation of quality, service, quick turnaround time and cost-effective prices. Our customers are spread throughout Australia, Indonesia and the South West Pacific. No job is too large or too small, and all jobs are undertaken with the same level of expertise and professionalism to ensure our customers’ requirements are met.

Address:

Phone:

PO Box 431, RYDALMERE, NSW 1701

02 8844 9112 02 8844 9128

Fax:

ifm efector Pty Ltd About:

We assist major players in the mining and allied industries in finding solutions as they work to maximise the overall life of their assets. By continuing to strive to provide technologies that offer high-value-add while helping our clients meet the life expectations of their parts, we will help them achieve sustainable development.

ifm efector is a subsidiary of ifm electronic. ifm provides Germanengineered and manufactured sensor and control solutions for automation, including position sensors and object recognition, fluid sensors and diagnostic systems, bus systems and identification systems, control systems and connection technology. For more information please visit www.ifm.com/au.

Products:

Activity:

HMG Hardchrome specialises in the repair and manufacture of hydraulic cylinders for various mobile and fixed plant equipment: CAT haul truck cylinder stock is carried by HMG Hardchrome

ifm efector is a German-based manufacturer of high-quality and innovative sensors for industrial automation. ifm provides the right combination of German engineering and local service and support.

Numerous methods of surface reclamation are completed in-house such as Hardchrome plating, HVOF and ARC Spray

Products:

Reclamation of a variety of parts using up-to-date methods (Brake anchors, wheel spindles, gearbox shafts etc) Hydraulic pump and valve body reclamations with testing

Inductive, capacitive, and magnetic and cylinder sensors, safety technology, valve sensors, photoelectric sensors, object recognition, encoders, evaluation systems and power supplies.

Deep hole drilling and deep hole boring capabilities.

Fluid sensors and diagnostic systems

Website:

Level, flow, pressure and temperature sensors, diagnostic systems, evaluation systems and power supplies.

www.hmghardchrome.com.au

Bus systems, identification systems and control systems

Offices: QLD

Bus system AS-interface, multicode reading systems, RF-identification systems, power supplies and control systems for mobile vehicles.

Address:

Phone:

1 Mundin Street, MEEANDAH, QLD 4008

07 3866 7000 07 3866 7010

Fax:

Position sensors and object recognition

Connection technology.

New Products: PIM Pressure sensor with diagnostic function for pumps EcoLink M12 sensor cables Efector PMD – Low-cost optical distance measurement Efector self-monitoring temperature sensor with long-term stability Efector mid mag-flow sensor.

Equipment: Position Sensors: •

Inductive Proximity Sensors

•

Magnetic Proximity Sensors

•

Capacitive Proximity Sensors

•

Valve Position Sensors

•

Photo-electric Sensors

MESCA MEMBERS DIRECTORY VOL 8 • 77

MESCA SUPPLIERS Industry Buying Guide

•

Laser Distance Sensors

•

Object Recognition Sensors

IFS Australia Pty Ltd

•

Fail-safe Inductive Sensors.

About:

Fluid Sensors: •

Pressure Sensors.

Other Countries: ifm is a global company with its global headquarters located in Essen, Germany. ifm has 55 subsidiaries worldwide and more than 2,600 employees servicing more than 69,000 customers.

Specialisation: Specialist suppliers of sensors for the Automation of plant associated with Mining, Industrial, Food and Beverage and Water Industries.

Website:

IFS is a public company founded in 1983 that develops, supplies and implements IFS Applications. IFS focuses on agile businesses where any of four core processes are strategic: Service and Asset Management, manufacturing, supply chain and projects. Industries include Mining and Resources, Oil and Gas, Construction, Engineering and Contracting, and all asset-intensive industries. The company has more than 2000 customers and is present in over 50 countries with 2800 employees. Some of IFS’ Customers in Australia include Alliance Contracting, Babcock, Geo Fabrics, Icon Engineering, Ngarda, Uhde Sheddon, Visy.

Activity: IFS Applications is a project-based ERP solution with tightly integrated project management functionality.

Products:

www.ifm.com/au

IFS Applications is a component-based extended ERP suite built on SOA Technology.

Offices: Head Office – VIC Address:

Phone:

PO Box 749, MULGRAVE, VIC 3170

1300 365 088 1300 365 070

Fax:

Other Countries: IFS is a global company, founded in Sweden and operating in over 50 countries.

Website:

IFS

www.ifsworld.com Offices: VIC

About: Integrated Facility Solutions (IFS) offers government and private sector institutions a single point of contact and tailored solutions to a diverse range of facility management services. We are able to offer, through our extensive industry experience, a strategic, client-focused approach to facility management and service delivery, which is innovative and reliable.

Address:

Phone:

Level 1, Suite 7, 796 High Street, KEW EAST, VIC 3102

03 9862 3800 03 9862 3888

Fax:

Activity: Total Facilities Management Services.

Infra Tech Pty Ltd

Products:

Offices: WA

•

Cleaning

•

Catering

•

Accommodation

•

Security Services

•

Village Services

•

Handyman Services

•

Painting

•

Horticultural Services

•

Laundry Services.

Address:

Phone:

45 Miguel Road, BIBRA LAKE, WA 6163

08 9337 5922 08 9337 5955

Fax:

Ingal EPS About:

Specialisation: Working closely in partnership with our clients to identify and interpret their specific needs and business objectives, we are able to translate these into initiatives and goals from which we specifically optimise operational and financial performance, add value and deliver a solution-focused facility service tailored to the needs of your organisation.

Website:

INGAL EPS is Australia’s leading manufacturer and supplier of quality galvanised steel poles for lighting, communications and power. INGAL EPS has a presence in every Australian state and territory.

Activity: Manufacturer and supplier of galvanised steel poles, columns and structures.

Products:

www.integratedfacilitysolutions.com.au

•

Street lighting poles

Offices: VIC

•

Floodlighting poles

•

Lowering systems including Hinged Poles and High Masts

•

Handrail poles for conveyors

•

Communication poles

•

CCTV and Camera Poles

•

Power transmission, sub-transmission, and distribution poles

Address:

Phone:

Fax:

Level 27, 101 Collins Street, MELBOURNE, VIC 3000

03 6237 5400 03 6234 5449

78 • MESCA MEMBERS DIRECTORY VOL 8

MESCA SUPPLIERS Industry Buying Guide

•

Utility poles for transmission, sub-transmission, and distribution lines

•

Lowering systems for ease of access and maintenance

•

Special application structures

•

Services and Accessories.

manufacturing, software and scientific industries, spanning international markets. Our primary focus is in the Resources Sector. Our work is based on accountability, genuine care, integrity, trust and utmost respect for the people that we engage with.

Products:

New Products:

Insight Business is the acknowledged expert in preparing the R&D tax credit applications and the supporting documents, including financial work papers, audit files and detailed R&D Plans. This is a very worthwhile activity for eligible business. We view this as a long-term process rather than a short-term tax grab, which we believe will pay-off handsomely with benefits not just in terms of the final entitlement, but in the long-term health and wealth of your business.

SwingSafe™ See-Saw Poles Platform System Telecommunication Monopoles.

Other Countries:

We also assist our clients with access to Export Grants, Commercialisation Australia grants, Tariff Exemptions and Rebates.

Australia; China; India and the Philippines.

Specialisation: Tapered steel sections as well as pipe, rectangular hollow section, and square hollow section structures.

Website:

www.ingaleps.com.au Offices: ACT Address:

Phone:

26 Jukes Street, HACKETT, ACT 2602

1800 623 302 02 6247 4777

Fax:

In Gear Engineering Pty Ltd Offices: NSW Address:

Phone:

Fax:

3 / 56 Oatley Parade, HURSTVILLE, NSW 1419

02 9570 2113 02 9570 2064

Insight Business About: Insight Business specialises in empowering Australian business owners to access grants, tax incentives and other exemptions through their businesses. Our approach empowers clients to positively drive the profits of their business, teams and managers whilst improving their tax position. With a team of highly experienced Chartered Accountants and Consultants, most of whom have Top-Tier experience. Each of our team members also has engineering experience, or scientific qualifications and backgrounds. Unlike many of our competitors, this dual approach allows us to understand the projects we are working on a highly technical level. This gives them the ability to understand both the financial and operational aspects of the projects we work on. Our director – Martin Reed – is the only R&D Consultant in Perth with a Doctoral Qualification (current) – having specialised in studying the Innovation and Financial Performance of the All-Ords 500. Insight’s methods have benefited many high-profile firms, small- to largescale mining and mining services companies, Oil and Gas companies, and manufacturing and scientific / technical firms.

New Products: Insight Business specialises in empowering Australian business owners to access grants, tax incentives and other exemptions through their businesses. Our approach empowers clients to positively drive the profits of their business, teams and managers whilst improving their tax position. With a team of highly experienced Chartered Accountants and Consultants, most of whom have Top-Tier experience. Each of our team members also has engineering experience, or scientific qualifications and backgrounds. Unlike many of our competitors, this dual approach allows us to understand the projects we are working on a highly technical level. This gives them the ability to understand both the financial and operational aspects of the projects we work on. Our director – Martin Reed – is the only R&D Consultant in Perth with a Doctoral Qualification (current) – having specialised in studying the Innovation and Financial Performance of the All-Ords 500. Insight’s methods have benefited many high-profile firms, small- to largescale mining and mining services companies, Oil and Gas companies, and manufacturing and scientific / technical firms.

Website:

www.insightbusiness.com.au Offices: WA Address:

Phone:

C1/1 The Esplanade, 1800 818 554 MOUNT PLEASANT, WA 6153

Insurance House Group About: 1) We will talk with you to understand what you do and what your exposure is for property damage or liability claims against you. 2) We will review your current insurance policies... if they do the job and meet our benchmarks, we will tell you; if they don’t meet our benchmarks, we will work with you to improve your cover. 3) If you don’t have any cover at the moment, we will give you sensible advice on how to manage the exposures you have and buy the insurance you need.

Activity: General Insurance Advisors and Insurance Brokers.

Products:

Activity:

General Insurance, Business recovery.

Our strategic approach gives our clients access to research and development programs, government grants, tariff exemptions and tax incentives, concessions, credits and offsets. Collectively, our Resultants have broad backgrounds – each qualified as Chartered Accountants, with expertise in Research and Development Consultancy, and access to grants and exemptions experience in the resources, pharmaceutical,

Website:

www.pmias.com.au and www.insurancehouse.com.au

MESCA MEMBERS DIRECTORY VOL 8 • 79

MESCA SUPPLIERS Industry Buying Guide

Offices: QLD

Website:

Address:

Phone:

Suite 9, 20 Masthead Drive, CLEVELAND, QLD 4163

07 3488 5702

www.integrapackaging.com Offices: QLD

Integra Packaging Qld Pty Ltd About: Integra Packaging is a packaging company that creates cost-effective solutions to protect and enhance our customers’ products throughout the supply chain. We provide a consulting and design service to identify costtake-out opportunities and use our global network to offer world’s best practice in packaging innovation.

Activity: Integra Packaging is a packaging company that creates cost-effective solutions to protect and enhance our customers’ products throughout the supply chain. We provide a consulting and design service to identify costtake-out opportunities and use our global network to offer world’s best practice in packaging innovation.

Products:

Address:

Phone:

Unit 193 YPC South, 49 Station Road, YEERONGPILLY, QLD 4105

07 3848 9290 07 3848 6959

Fax:

Integrated Pumping Solutions About: Backed by 40 years of experience in quality steel fabrication business with our mechanical design and engineering capabilities, Integrated Pumping Solutions (IPS) was started in 2009 with a single focus and mission to provide dewatering solutions with quality finish, premium performance and benchmark reliability.

Products: •

Dewatering Units

•

Steel Pontoons

•

Technical Packaging Solutions

•

Bare Shaft Pumps

•

Design/Testing/Certification of packaging

•

Customised steel fabrication

•

On-Site Services – Third-party packing, Container packing

•

Mine Spec coatings

•

Consumables – corrosion control, films, tapes, bags, inner fitments

•

Programmed Asset Management

•

Supply chain review process and report

•

Sales and Fleet Hire.

•

Lights – Intrinsically safe, torches, LED area lights

•

Materials – Timber, plastic, steel, cardboard etc.

Specialisation:

•

Technical Packaging Solutions

Experienced staff to assist in customising pump and dewatering solutions to suit individual requirements to specification. Specialised technical facility and workshop with in house coatings.

•

Design/Testing/Certification of packaging

•

On-Site Services – 3rd party packing, Container packing

Website:

•

Consumables – corrosion control, films, tapes, bags, inner fitments

www.interpumpsolutions.com.au

•

Supply chain review process and report

Offices: QLD

•

Lights – Intrinsically safe, torches, LED area lights

•

Materials – Timber, plastic, steel, cardboard etc.

New Products:

Other Countries: Alliance Partners in all countries.

Address:

Phone:

1/49 Enterprise Street, KUNDA PARK, QLD 4556

07 5453 2544 07 5453 4966

Fax:

Specialisation: Packaging solutions in the supply chain.6 miners advert proof.pdf

1/10/13

11:45 AM

Looking for more than just insurance?

AFSL 240954

ABN 33 006 500 072

The Mining Services Sector is a specialised industry that needs a personalised approach, and Insurance House understands this. Our dedicated insurance brokers can advise you on your insurance, risk and workers compensation needs. Call Peter Marer today!

CMY

insurancehouse.com.au House | 2065.indd 1 80 327411A_Insurance • MESCA MEMBERS DIRECTORY VOL 8

07 3488 5702 3/10/13 4:17 PM

MESCA SUPPLIERS Industry Buying Guide

Integrated Steel Detailing Offices: QLD Address:

Phone:

Level 1, 32 Logan Road, BRISBANE QLD 4001

0401 555 288

475/420), Zinc Rich Coatings (Interzinc 52), Specialised High Build and Ultra High Build Epoxies and Coatings for Immersion (Interzone 954, Interzone 485), Tank Linings (Interline 975) as well as other specialist maintenance coatings (Interplus/Interseal/Interzone range) and High-Temperature Coatings (Intertherm range). Chartek and Interchar Range of Intumescent Fire Protection Coatings. Ceilcote Range of high-acid and abrasion-resistant Coating Systems. Polibrid range of elastomeric Coatings. Detailed Specification writing and review (Interspec). Customised Maintenance Plans (Interplan).

Intercon Engineering Pty Ltd About: Intercon Engineering was established in 1988. It’s a privately owned Project and Construction Management company with substantial structural, mechanical and piping fabrication expertise. Corporate and manufacturing facilities are based at Prestons, Sydney, Australia and Busan, Korea.

Activity: Intercon Engineering undertakes construction and fabrication projects for the Oil and Gas, Minerals Processing, Mining, Power, Shutdowns and Heavy Industrial sectors within Australia and Asia Pacific.

New Products: Pipe – (seamless Carbon, Low Alloy, Stainless) Steel Sections, Stainless and Duplex Pipe, Fittings, sections and Plate. All ferrous and non-ferrous fittings.

Specialisation: Integrated project management of SMP materials supply/ management, shop fabrication and site installation. A ‘Highly Effective One Stop Solution’.

Website:

New Products: International has added to its protective coatings portfolio: Interplus® 1180 – a low-VOC, high-build, high-solids multipurpose epoxy with excellent cure in low- and high-temperature environments and Interfine 1080 – a high-performance, low-VOC single pack acrylic polysiloxane finish coat containing no free isocyanates.

Other Countries: International Paint has operations in 60 countries worldwide and over 3,500 employees. The company’s International® brand name has worldwide market leadership positions in Marine, Protective and Yacht paints.

Website:

www.international-pc.com Offices: QLD Address:

Phone:

115 Hyde Road, YERONGA, QLD 4104

07 3892 8888 07 3892 4287

Fax:

www.interconengineering.com.au

Iwaki Pumps Australia Pty Ltd

Offices: NSW

About:

Address:

Phone:

Fax:

Unit 22, 7-9 Progress Circuit, PRESTONS, NSW 2170

02 9608 4777 02 9608 4700

International Paint About: International Paint has operations in 60 countries worldwide and over 3,500 employees. The company’s International® brand name has worldwide market leadership positions in Protective Coatings as well as Marine and Yacht paints. International is part of AkzoNobel – the worlds largest paint company. In Australia, we have production in Brisbane and trade centres throughout the country. Secure your investment with International’s global expertise in Protective Coatings.

Activity:

Iwaki Co. Japan is a world leader in the development and manufacture of metering pumps and plastic magnetic drive sealless centrifugal pumps with 40 years’ experience in the field. Iwaki Pumps Australia Pty Ltd is a joint venture company with Iwaki Co. Ltd of Japan with direct access to factory engineering and manufacturing backup. Iwaki Pumps Australia is the largest supplier of magnet drive centrifugal pumps and one of the largest suppliers of chemical metering pumps in Australia. We have a fully maintained workshop and warehouse facility with extensive spare parts holding at our head office in Sydney. Three different series of Iwaki’s range are assembled in Australia with every pump individually tested to Iwaki factory standards. We have branches located in Brisbane and Melbourne. Iwaki products are handled by authorised distributors in all other states of Australia. Iwaki magnetic drive centrifugal pumps, ranging from 5L/min to 300L/ min, are purpose-made for transferring the corrosive chemicals, such as concentrated acids and alkalis. The magnetic coupling replaces conventional mechanical shaft seals ensuring safe leak-free performance. Chemical metering pumps, ranging from 0.017L/min to 86L/min, are designed for accurate metering of corrosive chemicals. Range includes mechanical diaphragm, hydraulic diaphragm and plunger piston type.

International Protective Coatings is the leading supplier of highperformance coatings in Australasia. We provide coatings in a number of key market sectors, foremost of which in Australia is the Mining and Mineral Processing Market. International provides coatings for every facet of the mining operation from extraction, processing, refining, smelting and transportation.

Yamada air-operated double diaphragm pumps, ranging from 21L/min to 800L/min, are designed to be either portable or permanent installation for transfer of all fluids. These pumps are self-priming and can be allowed to run dry without causing damage.

Products:

Widely used in mineral processing plants throughout the world with distinct advantages over its direct competitors.

Inter range of Protective Coatings such as:

Munsch horizontal and vertical centrifugal pumps, ranging up to 1000m3/ hr, are designed to handle corrosive chemicals containing solid particles.

Rapid Cure Epoxies (Intercure 200), Polyurethane Topcoats (Intercure 990), Polysiloxane Topcoats (Intercure 979/878), High Build Epoxies (Intercure

MESCA MEMBERS DIRECTORY VOL 8 • 81

MESCA SUPPLIERS Industry Buying Guide

Activity: We are a joint venture company with Iwaki Pumps Japan. We specialise in non-metallic magnetic drive pumps, chemical metering pumps, airoperated double diaphragm pumps, non-metallic slurry pumps.

Products: Iwaki magnetic drive centrifugal pumps, metering pumps, Yamada air-operated double diaphragm pumps, Munsch plastic chemical/slurry pumps, Tombo gaskets, dosing pump skid Systems. Metering Pumps – Iwaki EW, LK and AX Series. Magnetic drive centrifugal pumps for corrosive chemicals – Iwaki MX, MDM, MDF-L and MDE series. Chemical slurry pumps for corrosives – Munsch NP, TNP-KL series.

Equipment: Large warehouse holding all spares and pumps sold. Locally assemble three series of Iwaki Pumps, with testing to Iwaki Japan factory standard. Workshop with full machining, assembly, testing and fabrication facility. Branches in Sydney, Melbourne.

Specialisation:

Jacobs E&C Australia Pty Ltd About: Jacobs E&C Australia is a part of the Jacobs Engineering Group Inc., one of the world’s largest and most diverse providers of professional technical services with approximately 65,000 employees. With 2012 revenues of $10.9 billion, Jacobs offers full-spectrum support to industrial, commercial, and government clients across multiple markets. Services include scientific and specialty consulting as well as all aspects of engineering and construction, and operations and maintenance. Jacobs E&C Australia employs approximately 600 experienced personnel, with established offices in Melbourne, Brisbane, Adelaide, Sydney and Perth, and providing services to the following industries: •

Petroleum and Chemicals

•

Mining and Minerals

•

Infrastructure.

Activity: Jacobs E&C Australia has established a position as one of the country’s leading technology-based engineering and construction contractors. Through involvement in many landmark developments spanning over 65 years, Jacobs E&C Australia has built a strong track record based on the successful delivery of engineering and construction projects throughout Australia, New Zealand and South-East Asia.

•

Specialist Supplier of pumps for the transfer and metering of corrosive chemicals.

•

Largest supplier of plastic magnet drive pumps in Australia.

Products:

•

Widest range of metering pumps available in Australia.

In Australia, Jacobs’ breadth of capability is unique amongst its regional competitors, providing the complete range of services necessary to realise total project solutions from conception through to start-up and operation. These include:

Website:

www.iwaki-pumps.com.au Offices: NSW Address:

Phone:

Fax:

PO Box 698, CASTLE HILL, NSW 2154

02 9899 2411 02 9899 2421

J J Richards & Sons

•

Project definition

•

Pre-feasibility and feasibility studies

•

Capital Cost Estimating

•

Process studies, design, technology, management and consulting

•

HSE Consulting

•

Detail design

•

Long-term minor capital works

•

Procurement

•

Construction and commissioning.

The services are delivered via a team comprising the following disciplines:

Offices: QLD Address:

Phone:

Fax:

3 Grant Street, CLEVELAND, QLD 4163

07 3488 9600 07 3488 9699

J & T Mechanical Installations Pty Ltd Offices: QLD Address:

Phone:

Fax:

2 / 19 Expansion Street, MUDGEERABA, QLD 4213

07 5539 6660 07 5564 6669

82 • MESCA MEMBERS DIRECTORY VOL 8

•

Project definition

•

Project Management

•

Project Controls

•

Health, Safety and Environment

•

Contracts and Commercial Administration

•

Procurement, Expediting and Inspection

•

Construction Management

•

Commissioning and Completions

•

Process Engineering

•

Mechanical Engineering

•

Instrument and Control Engineering

•

Electrical Engineering

•

Civil/Structural Engineering

•

Piping and Layout Engineering

•

External Affairs (i.e. community groups and external stakeholders).

Jacobs E&C Australia provides the knowledge of local industry and the experience of specialist staff, combined with the depth and strength of global project operations. Global strength and local expertise provides our clients with maximum assurance of cost-effective engineering and construction solutions – high-quality projects delivered on time and within budget.

MESCA SUPPLIERS Industry Buying Guide

Website:

Specialisation:

www.jacobs.com

Manufacturer providing the complete ground support solution, including steel and fibreglass bolts for primary and secondary support, plates, resins, grouts, and comprehensive technical support.

Offices: VIC Address:

Phone:

Level 6, 600 St Kilda Road, MELBOURNE, VIC 3004

03 9272 3444 03 9522 9555

Fax:

Jennmar Australia About: Jennmar Australia Pty Ltd is pleased to provide a line of world-class strata control products for mining applications. Jennmar Australia is a part of Jennmar Corporation, Pittsburgh, Pennsylvania: America’s leading designer and manufacturer of strata control systems for the mining and civil industries with manufacturing plants located internationally. We are an ISO accredited Australian manufacturing company utilising local labour, Australian Steel and component parts. Jennmar provides the complete ground support solution, with two modern, state-of-the-art bolt manufacturing plants and a state-of-the-art resin production plant. Our plants are complemented by depots in the hub of the major coal and hardrock mining regions. Our commitment to technical support is the industry benchmark, with mine service representatives with underground mining experience, expert geo-technical managers and mining engineers supporting our entire product line. Jennmar Australia Pty Ltd is a customer-oriented company focused on assisting the underground mine optimise its efficiency. Our commitment is to provide the Australian mining industry products that meet the highest standards of quality and safety, continuous innovation, competitive pricing, the best technical service and the most responsive and reliable supply of ground control products in the industry.

Products: Complete range of Ground Support Products for Coal and Hardrock: Steel, resin anchored roofbolts for primary roof support A complete range of J-Lok oil and water based resins Wide range of cables for secondary roof support, including: •

Groutable cable bolts: TG Cable Bolt and Bowen Cable

•

15.2mm single, double and triple strand cable bolts.

Split Sets and Yield Lok Bolts Fibreglass dowels for rib support Steel and plastic plates Steel and plastic mesh Jennchem pumpable roof support and sprayed support Technical support and nationally certified training Experienced mine service representatives in the hub of the major mining regions.

New Products: TG Cable Bolt TOTO Cable Tensioning System Bowen Cable Yield Lok Bolt.

Other Countries: Pittsburgh, USA.

Website:

www.jennmar.com Offices: NSW Address:

Phone:

40-44 Anzac Avenue, SMEATON GRANGE, NSW 2567

02 4648 7500 02 4648 7555

Fax:

John Holland Pty Ltd About: John Holland delivers contracting, engineering and services solutions to the infrastructure, energy, resources and transport services sectors across Australia, New Zealand, South-East Asia, the Middle East and beyond. Throughout our history, we have been entrusted with some of Australia’s most iconic projects and have grown into a diverse contracting company with over 6,500 employees and $6 billion work-in-hand. John Holland has an unwavering commitment to safety, with the aim of ensuring everyone working with the business returns home safely every day. The company’s mission, vision and values, along with its business strategy, supports sustainable success by providing unity of purpose, motivating employees, focusing effort and investment, and stewarding John Holland’s reputation as a leader in our industry.

Activity: Expertise in complex building and civil construction and technical engineering has been at the heart of our business for over 60 years. We have created many innovative civil engineering and construction techniques – some of which have become industry standard. We also continue to be an industry-leader in the delivery of public building works, with specialist capabilities in the health and education sectors. In recent years, we have developed a suite of specialist capabilities that now define our company and our brand as well as providing a platform for the extraordinary growth experienced over the recent decade. Our competitive advantage has been built through our industry-leading specialist experience in tunnelling, water treatment, heavy marine infrastructure, mechanical, electrical and instrumentation, power transmission and distribution, and rail construction, maintenance and operations. John Holland is a wholly owned subsidiary of Leighton Holdings Limited, a company listed on the Australian Securities Exchange.

Products: We have extensive knowledge and experience in the energy and power sectors, including design and construction services for gas, coal, wind, hydro, solar and industrial power plants, as well as the construction of nuclear facilities and high-voltage power transmission infrastructure. We are a major supplier of upgrade and maintenance services for existing power plants and transmission line projects, ranging from 66kV through to 500kV systems. In resources, we have built an impressive list of successful projects in the minerals and industrial sectors, including stockyards, wharves, jetties, ship berths and ship-loading systems. Core capabilities include the delivery of coal and iron ore port infrastructure projects, coal and iron ore material handling and processing plants through EPC and supply, erect and construct contract delivery mechanisms.

Other Countries: Operating across Australia, New Zealand, South-East Asia, the Middle East and beyond. MESCA MEMBERS DIRECTORY VOL 8 • 83

MESCA SUPPLIERS Industry Buying Guide

Jotun Australia Pty Ltd

Website:

www.johnholland.com.au

About:

Offices: QLD Address:

Phone:

Fax:

The Emporium, 07 3867 7000 07 3867 7100 1000 Ann Street, FORTITUDE VALLEY, QLD 4006

Jord International Pty Ltd About: Jord International is a multidisciplined engineering company that designs and manufactures a broad range of individual process equipment and turnkey plants. Jord International operates with several trading names and comprises various affiliated companies. The Jord group of companies commenced business in 1972. Since this time, many thousands of custom-built plant and equipment have been successfully commissioned across a wide range of process industries; oil and gas, petrochemical, power, food and minerals processing. Jord’s equipment currently operates in over 40 countries, spread across six continents. Jord’s primary focus, however, is to service the Asian, Middle East and Australasian regions. Jord International combines its own technologies in heat and mass transfer with a number of strategic alliances, partnering internationally recognised leaders in complementary technologies. This allows Jord to service customer needs across a broad range of process requirements.

Activity: Jord International is a multidisciplined engineering company that designs and manufactures a broad range of individual process equipment and turnkey plants. Jord operates in Australasia, S.E.Asia, USA, India, Pakistan, Middle East, Korea and Europe.

Products:

Jotun Australia Pty Ltd is part of the worldwide Jotun Group, which has 71 companies and 36 production facilities globally. Jotun A/S was formed in 1971 with the merger of the four largest paint manufacturers in Norway. Every Jotun product on offer is the result of intensive research and development, which combines state-of-the-art technology with innovative thinking, practical knowledge and experience. Jotun Australia was established in 1990 making their manufacturing and head office home in Brooklyn, Victoria. Today, we have branches and distributors located around Australia, as well as agents in major regional areas and New Zealand. Jotun Australia operates three divisions – Protective, Marine and Powder Coatings. PROTECTIVE COATINGS Jotun offers technical advice, quality protective coating products, exceptional service and sensible pricing on the full range of coatings for mining, mineral processing, export facilities, oil and gas industry, energy and infrastructure, for new work and maintenance. We offer epoxies, polyurethanes, vinyl esters, polyesters, as well as many single pack products to protect property. MARINE COATINGS With over 15,000 vessels protected by Jotun Marine Coatings globally, we have proven that we can offer sophisticated products that effectively prevent corrosion and fouling on any vessel type. With an emphasis on meeting our customers’ needs, our technical service team ensures that every coating task, from the largest newbuild to the smallest maintenance project, is done to help you achieve the most effective and economic coating protection and performance. POWDER COATINGS Jotun Powder Coatings manufacture Thermosetting Powder Coatings (polyester and epoxy) and Fusion Bond Epoxy for decoration and protection of mass-produced articles. Jotun’s high-quality powder coatings can be used on a wide variety of substrates found in our everyday life, providing the coated objects an aesthetic look, yet protecting them and enhancing their durability.

Activity:

Air Coolers / Heat Transfer

Jotun Australia Pty Ltd is a manufacturer of protective coatings for industrial use.

Process Plant Filtration

Products:

Separation.

Hardtop, Imperite, Jotacote, Jotamastic, Jotaprime, Marathon, Penguard, Tankguard.

Pipeline Products:

Website:

Separation.

www.jotun.com

New Products:

Offices: Head Office – VIC

Vacuum Steam Condensers Process Skids.

Website:

www.jord.com.au Offices: NSW Address:

Phone:

PO Box 548, ST LEONARDS, NSW 1590

02 8425 1500 02 8425 1599

Fax:

Address:

Phone:

9 Cawley Road, BROOKLYN, VIC 3025

03 9314 0722 03 9314 0423

Joy Global (AUS) Pty Ltd About: P&H Mining Equipment is a global leader in the manufacture and service of large excavating and drilling machines used in hard rock and coal overburden open-cut mining applications. Ninety per cent of the world’s surface mines utilise P&H equipment

Products:

84 • MESCA MEMBERS DIRECTORY VOL 8

Fax:

•

C-Series of Electric Mining Shovels

•

P&H Rotary Blasthole drills

MESCA SUPPLIERS Industry Buying Guide

•

P&H Walking Draglines

•

Continental Crushing and Conveying Products – feeder breakers, reclaim feeders, VMT sizers, belt conveyor systems, idlers, pulleys and Stamler Products.

KAESER Compressors Australia Pty Ltd About:

Website:

www.minepro.com Offices: QLD Address:

Phone:

Fax:

Building 5, Level 3, 747 Lytton Road, MURARRIE, QLD 4172

07 3240 4600

07 3240 4666

Kador Engineering (Aust) Pty Ltd About: Kador Engineering is a privately owned Australian engineering firm founded in 1972. Since then, we have established a history of manufacture of quality engineered products for Australia’s largest resource companies, including BHP Billiton, Santos, Nabalco, Xstrata and Rio Tinto. Kador also manufactures components and products for Mack Trucks, Terex, Cesco, Hastings Deering (Caterpillar), Komatsu Australia, Hitachi and the Queensland Government. Kador operates from three manufacturing plants in Brisbane and employs more than 150 qualified tradespeople with diverse skills. The Company’s head office and central operations are at 14 Boron Street, Sumner Park. The Company has two other Brisbane manufacturing facilities in Sherwood and Carole Park.

KAESER Compressors has grown to become one of the world’s leading manufacturers of compressed air, with over 90 years of engineering and manufacturing experience. KAESER Compressors is committed to providing the very best in technology and customer service worldwide. In Australia, KAESER Compressors has a nationwide presence with their headquarters in Dandenong, Victoria. They are represented in every state of Australia, New Zealand and New Caledonia, through an extensive distributor network and their own Sales and Service personnel. The Dandenong headquarters supports the entire range of KAESER Compressors ex-stock and backs up the Australian, New Zealand and New Caledonian markets with genuine spare parts. The Company runs a 24-hour emergency breakdown and part delivery Service for all KAESER products. As an industry service, and to communicate a greater depth of knowledge and understanding of compressed air capabilities and applications, KAESER presents Compressed Air Seminars to the Australian and New Zealand industry annually. As a world citizen, KAESER continuously strives to reduce the impact to and protect our environment, manufacturing condensate traps and oil/water separators. Standing behind KAESER Compressors Australia is the worldwide operating network of KAESER Kompressoren in Germany, which is the largest manufacturer of oil injected screw compressors with the patented Sigma Profile. Our products are continuously updated and enhanced using advanced test facilities and precision-measuring equipment in our Research and Development centre. Our engineers are continuously pushing the boundaries of compressor technology with new models.

Kador’s commitment to quality control is well established. The Company is accredited to the International quality management standard AS/NZS ISO 9001 by SAI Global. High standards are also met by our compliance with AS 1210 for manufacturing pressure vessels, and in meeting the quality demanded by Australia’s leading resource companies and the Australian Defence Force.

We firmly believe in providing our customers with the very best advice and technical expertise available. Benefit from our decades of experience in compressed air engineering with no obligation and no cost. More compressed air and less energy consumption.

Kador’s main market is Australia and Asia, but Kador has also supplied manufactured goods to other overseas regions.

KAESER Compressors offers products, services and complete systems for the generation, treatment and delivery of energy in the form of compressed air. System solutions aim at optimal economy and efficiency.

Activity:

www.kador.com.au/products.htm

The innovative products and services of outstanding quality provided by KAESER assist the compressed air user in strengthening competitive capability. Continuous dialogue with customers is an essential part of concept development and continuous improvement in the total economy, efficiency, durability and utilisation of compressed air equipment.

Equipment:

Products:

www.kador.com.au/manufact.htm

Rotary Screw Compressors

Major supplier of fabricated steel products to the resource and transport industries.

Products:

Reciprocating Compressors

Specialisation: Kador specialises in the design and fabrication of pressure vessels, mine dump bodies, water spray rigs, mine service vehicles, bottom dump haulers and specialised heavy plate work fabrications

Dental Compressors SAM 3-D – Sigma Air Manager Sigma Control 2

Website:

Refrigeration Dryers

www.kador.com.au

Dessicant Dryers Filters

Offices: QLD Address:

Dry-Running Oil-free-air Compressors

Phone:

Fax:

148 Cobalt Street, 07 3376 4455 07 3271 1969 CAROLE PARK, QLD 4300

Diesel Portables Blowers Turnkey Solutions SKID solutions Container Solutions Energy Audit Compressed Air Seminars Tailored and Scheduled Maintenance Packages

MESCA MEMBERS DIRECTORY VOL 8 • 85

MESCA SUPPLIERS Industry Buying Guide

Website:

SmartPipeTM Aluminium Air Reticulation System Air Receivers

www.kempe.com.au

Tailored and Scheduled Maintenance Packages.

Offices: VIC

New Products: Screw Compressor – SK AirCentre Range SAM3D – Sigma Air Manager 3D Sigma Control 2.

Website:

Address:

Phone:

50 Gheringhap Street, GEELONG, VIC 3220

03 5225 2900 03 5225 2950

Fax:

Kentz Pty Ltd

www.kaeser.com.au Offices: VIC Address:

Phone:

Fax:

Locked Bag 1406, DANDENONG SOUTH, VIC 3164

03 9791 5999 03 9791 5733

About: National Company.

Activity: Industrial Electrical and Instrumentation and Control Installation and Engineering Services.

Email: info.australia@kaeser.com

Products:

Keech Castings Australia Pty Ltd Offices: NSW

Installation and Engineering Services.

Equipment: Engineering Services plus HV Specialist Testing.

Address:

Phone:

PO Box 6563, SILVERWATER, NSW 1811

02 9648 3100 02 9648 3866

Fax:

Other Countries: Available through Kentz.

Website:

www.kentz.com

Kempe Activity: Engineering Company providing services and equipment to heavy industry.

Products:

Offices: QLD Address:

Phone:

GPO Box 5708, BRISBANE, QLD 4001

07 3370 8100 07 3370 8101

Fax:

Industrial equipment Fabricated steelwork Specialised industrial materials Fluid power and valving Maintenance services.

New Products: By-product processing.

Equipment: Bulk Material Handling Crushing and Mineral / metal processing Automation / Control Systems.

Other Countries: Previously completed projects in: New Zealand, China, India, UAE, Oman, Qatar, Bahrain, Italy, Spain, Norway, Iceland, Canada, USA, Brazil, Argentina.

Specialisation: Aluminium Smelting Mining Power Generation Oil and gas Timber Pulp and Paper.

86 • MESCA MEMBERS DIRECTORY VOL 8

Kerman Contracting Pty Ltd About: KERMAN is one of the most experienced design and construction companies in Western Australia. We specialise in the design and construction of non-process infrastructure, process plants, bulk material storage and handling facilities, industrial facilities and accommodation villages. Our clients are among the largest companies in the resource, agriculture and manufacturing sectors. Kerman has sustained controlled growth, now with an average annual turnover in excess of $250 million and completed projects with a combined value in excess of $1.5 billion, including competitively tendered lump sum and open book negotiated contracts over the 32 plus years we have been operating. Our point of difference is our ability to leverage over 32 years of our design, engineering, construction experience and knowledge to provide cost-effective, innovative design and construction solutions for our clients. Our success in retaining a highly skilled, long-term, integrated engineering and hands-on management team is a key component of our ability to deliver high-quality, safe and timely outcomes for our clients unrivalled by our competition. Much of our success can be attributed to our ability to combine the strength and stability of a large organisation with the service, flexibility, openness and honesty you would expect from a smaller one. We call this the “Kerman Way”, and it has cemented our relationships with our key clients who have rewarded our quality service, innovative approach and our cooperative style with the majority of our contracts being repeat business.

MESCA SUPPLIERS Industry Buying Guide

The following areas define the disciplines of design, supply and installation work undertaken by Kerman.

•

Mobile cranes from 8 to 100 tonne capacity

•

Boom Lift Working Platforms

ENGINEERING DESIGN

•

Welding Plant and Generators

Kerman has developed considerable expertise and become a leader in the design and construction of industrial process plants, materials handling and bulk storage facilities and non-process infrastructure, and we continue to attract our clients with innovative and competitive designs.

•

Structural and mechanical erection tools and equipment

•

Transportable Site Offices and Security Containers

•

Construction vehicles (i.e. Hiab Trucks and Utilities)

Our team provides an important blend of analytical, civil, structural, mechanical and electrical design engineers, together with a wealth of practical experience from within our company.

•

Bobcats and Forklifts

•

Mobile aluminium Scaffolding Towers

•

Tank Building Equipment, including specialised Scaffolding.

Design services include: • Conceptual Planning • Civil and Structural • Mechanical and Process Piping • Materials Handling and Storage • Electrical, Instrumentation and Control • Infrastructure • Mechanical Ventilation • Hydraulic Services • Shop Detail Drafting. Our in-house design team focuses primarily in the areas of conceptual, feasibility and mechanical engineering design, developing our clients’ original process and schematic layouts prior to detailed engineering. We also carry out most mechanical and piping layout work in house. CIVIL AND INFRASTRUCTURE CONSTRUCTION •

Ground improvements (i.e. piling)

•

Bulk and detailed earthworks

•

Heavy-duty roadways and hardstand construction

•

Concrete works (i.e. footings, tunnels, pits, hoppers)

•

Precast tilt retaining walls

•

Reticulation of power, communications, water and sewer services

•

Stormwater drainage construction including water treatment basins

•

Landscaping and irrigation of project works on completion

•

Site boundary and security fencing.

ENGINEERING CONSTRUCTION Fabrication, Surface Treatment and Erection of the following: •

Building and Plant Structural Steelwork

•

Storage Tanks and Silos

•

Material Handling and Conveying Systems

•

Mechanical Plant and Process Piping

•

Pipe Spooling

•

Pressure Vessels and Platework.

E&I and HYDRAULIC SERVICES • High- and medium-voltage power services • Motor control and protection systems • Instrumentation and process systems • Small light and power systems • Communications and access security systems • Heating, ventilation and air-conditioning • Specialist mechanical exhaust and extraction systems • Potable and fire water installations • Septic and sanitary drainage systems.

MANAGEMENT SYSTEMS Kerman employs comprehensive and effective systems to manage and control all aspects of the project from the development of concept design, PFDs and P&IDs through to commissioning and hand-over. We have developed sensible and practical project management systems for our business processes to ensure that all stages of design, engineering, fabrication, transport, erection and commissioning are fully managed and documented to ensure all key dates are met and costs contained within agreed budgets. Our management systems include: •

HSE Management

•

Quality Management

•

HR/IR management

•

Procurement and Expediting

•

Plant Commissioning.

Activity: Design and Construction of Materials Handling, Bulk Storage, Process Plants, Non-Process Infrastructure, Accommodation Villages and Industrial Facilities for the Mining Industry.

Products: Non-process infrastructure Process plants Bulk storage and materials handling Industrial facilities Accommodation villages.

New Products: EPC designs and constructs turnkey whole of project solutions across all disciplines.

Specialisation: Design and Construction of Materials Handling, Process Plants and NonProcess Infrastructure for the Mining, Oil and Gas, and Energy Industries.

Website:

www.kerman.com.au Offices: WA Address:

Phone:

Level 1, 30 Kearns Crescent, ARDROSS, WA 6154

08 9315 6200 08 9315 6222

Fax:

GENERAL BUILDING CONSTRUCTION •

Accommodation Villages

•

Offices and Amenities

•

Plant Control Rooms

•

Switchrooms

•

Transformer Compounds.

EQUIPMENT We own a fleet of construction equipment, which includes:

MESCA MEMBERS DIRECTORY VOL 8 • 87

MESCA SUPPLIERS Industry Buying Guide

Kinder & Co Pty Ltd About: Proudly celebrating our 27th year of providing Australia with a complete range of high-performance, quality and reliable conveyor products and bulk material handling solutions, Kinder & Co is committed to increasing efficiency and productivity in every application. As an ISO9001-accredited company that has been committed to integrity, family values and concern for our customers since the very beginning, we will always strive to provide the highest industry standards of service and safety. Our growing list of award-winning conveyor products and proven materials handling solutions helps companies like yours tap into the best-of-breed research and development from the world’s suppliers and providers. We take pride in our mission to provide continuous improvement to the bulk materials handling industry. We believe that our experience and products will help you and your company take a more performance driven approach to improved productivity, enhanced growth and reduced maintenance costs.

Activity: Throughout Kinder & Co‘s 27+ year history, we have been committed to engineering and delivering bulk materials handling solutions that are simply “MADE BETTER” for our customers who work in the harshest, toughest and most demanding environments. Kinder & Co has been dedicated to providing a wide range of new generation bulk materials handling solutions, including: •

Conveyor Hardware, including Idlers, Pulleys, Skirting and Transfer Products

•

Conveyor System/ Processing Equipment, including Metal Detector, Screening and Belt Weighing Products

•

Bucket Elevator Components.

In addition to these three key conveyor product categories are our high-performance, engineered polyurethane Materials Flow and AntiWear products, incorporating Kinder & Co’s trademarked K-Superline Polyurethane Lining System; a unique proprietary Kryptane® urethane wear liner, purposely engineered to meet the particular demands of specific materials. Low-friction linings K-Redi-Liner Modular Panels in either solid polyurethane or ceramic tiles complement the Anti-Wear range of products.

Products: CONVEYOR BELT COMPONENTS

flow problems, providing a uniform and controlled rate of flow. Anti-Wear: For superior abrasion resistance, Kinder & Co has developed a range of engineered polyurethane Anti-Wear products incorporating Kinder & Co’s trademarked K-Superline Polyurethane Lining System. Ready to respond to an already increasing demand, this lining system is available in a variety of application-specific durometers. CONVEYOR SYSTEM/ PROCESS EQUIPMENT Magnetic Separators and Metal Detectors: Magnetic separators and metal detectors are used in conveyor systems to protect downstream processing equipment and prevent expensive plant downtime. Kinder & Co’s magnetic separators can be installed above a conveyor to remove tramp iron. Metal detectors can be used to stop or divert the flow of product before it reaches downstream equipment. Screening products: Kinder & Co’s comprehensive range of screening components ensures maximum efficiency and life from screen media. The range includes tension rails, capping rubber, impact and wear panels, spray and flood nozzles, liners, non-blinding balls and bolt protection caps. Belt Weighing equipment: Utilising leading belt weighing technology for continuous flow rate calibration methods, Kinder & Co’s belt weighing equipment can be fitted in either new or existing belt conveyors to give accurate load data information. BUCKET ELEVATOR COMPONENTS Bucket Elevators: Kinder & Co offers an extensive range of elevator buckets, suitable for a wide variety of products in many different industries. Buckets can be supplied and manufactured from stainless steel, HDPE, cast nylon, reinforced nylon and polyurethane. A large selection of both carbon steel and stainless steel elevator bolts can also be supplied from stock.

New Products: We are proud to introduce the latest innovation in our proven line of products, the K-Superline Polyurethane Lining System. This revolutionary product delivers a long list of features that address many needs and wants that our customers have been asking for, including exceptional durability, field-tested design, enhanced engineering and a large range of grades and application options. In the current business world, every employer has the mandate to provide the healthiest, safest and most conducive environment for workers to excel and achieve a high level of productivity. As an award-winning organisation who shares your values, Kinder is your ideal partner to help you achieve your corporate and business goals. We believe this product will refresh your approach to better productivity, growth and reduced maintenance costs.

Conveyor Hardware: Bulk materials handling conveyor systems incorporate many different components and Kinder & Co has Australia’s largest range of conveyor hardware available, including conveyor rollers and idlers, pulleys, belt tracking and alignment accessories and belt repair products.

Specialisation:

Conveyor Skirting and Transfer: With Kinder & Co’s extensive range of belt support and conveyor skirting products, customers are assured of the right product for the right application. Every customer’s individual requirement is matched with the right conveyor product for the job, ensuring safe, efficient, low-maintenance and cost-effective conveyor operation every time.

Website:

Conveyor Belt Cleaning: For efficient conveyor operation and reduced maintenance downtime, online belt cleaning is essential in many operations. Kinder & Co can offer numerous options for belt cleaning, providing the best solution for each individual application. Vibrating rollers, belt ploughs or blades, brushes and scrapers are just some of the options available. Safety and Environmental: Safety in conveyor operation is paraMt. The K-Protector Return Idler Guard is a practical and safe solution to provide roller pinch point protection and is suitable for all roller diameters. Kinder & Co also offers a reliable range of essential conveyor emergency stop products including Belt Drift and Belt Rip detectors. As well as protecting the environment, Kinder & Co’s range of covers, hoods and sealing cloths also minimises the spread of dust onto moving conveyor parts, helping to reduce maintenance and equipment downtime. FLOW and ANTI-WEAR PRODUCTS Materials Flow: Product flow and abrasion are two of the biggest problems the bulk materials handling industry faces. Kinder & Co’s range of lowfriction liners and flow aids, such as vibratory motors, assist with common

88 • MESCA MEMBERS DIRECTORY VOL 8

Bulk Materials Handling Solutions, High-performance Conveyor products, Engineering Design, Technical Expertise, Proven Experience.

www.kinder.com.au Offices: VIC Address:

Phone:

Fax:

7 Helen Kob Drive, 03 9587 9244 03 9587 9344 BRAESIDE, VIC 3195

MESCA SUPPLIERS Industry Buying Guide

Kinetic Australia Pty Ltd

KINETIC SERVICES Whether big or small, Kinetic Australia will deliver the right people to make your project a success.

About:

We can provide an array of skilled staff ranging from 1 person to a team of 100.

Kinetic Australia is an integrated supplier of engineering services that is benchmarked in terms of precision, safety, performance, service and value. Our processes are backed by proven aerospace derived strategies and exacting standards with a commitment to safety, reliability, rapid response, precision, and integrity. Our core purpose is to maximise the efficiency and service ability of our customers’ assets and eliminate negative impact on their production and growth. We aspire to work with our clients as partners in their businesses, working hard in every project to achieve the delivery of high-quality electrical and mechanical engineering solutions in the area of power station construction, operation and maintenance.

Products: KINETIC POWER

Our team consists of some of the nation’s best Turbine Fitters, HV and Instrumentation Electricians, Commissioning, and experts in Controls and Systems. Our services include, but are not limited to: • Power Station Construction, Operation and Maintenance • Predictive Maintenance • Mechanical and Electrical Engineering services • Hydraulic systems and Construction, Maintenance and Repair • Manning and Supervision for fixed plant shutdowns • Welding and Boiler-Making services • Mining Component Repair / Refurbishment.

We implement aerospace derived predictive maintenance strategies and standards, with techniques including thermal imaging, vibration analysis, data trend monitoring and borescope inspection. Our strategies ensure the controlled management of plants to alleviate failures before they occur.

Website:

PRECISION OIL

Offices: Head Office – WA

A Kinetic Australia initiative, Precision Oil mobile purification plants remove impurities from oil, effectively restoring the properties of the oil to values superior to new oil at a fraction of the cost. Key Features: • Filtration to low ISO 4402-4406 standards • Highly efficient moisture extraction system • Appropriate to use across a diverse range of equipment oils from gas and steam turbines, to locomotives 326334A_Kinetic Aus | 2065 HIGHRES.pdf 1 16/12/13 • NO DOWNTIME as equipment can be left running if required • Oil acid content lowering system.

www.kineticaustralia.com.au Address:

Phone:

L2, 6 Thelma Street, WEST PERTH, WA 6005

08 6180 3240 08 6210 1368

Fax:

11:41 AM

KINETIC A U S T R A L I A

Engineering services backed by aerospace standards & efficiencies.

• • • •

Power stations Predictive maintenance Mechanical & electrical engineering Oil purification

Precision

Safety

Excellence

www.kineticaustralia.com.au P: +61 (0)8 6180 3240 MESCA MEMBERS DIRECTORY VOL 8 • 89

MESCA SUPPLIERS Industry Buying Guide

Komatsu Australia Pty Ltd Website:

www.komatsu.com.au Offices: Mining Head Office – QLD Address:

Phone:

Fax:

535 Progress Road, WACOL, QLD 4076

07 3246 6222 07 3270 5576

Products: KSB offers innovative pump and valve technology for all manner of applications for energy, mining, industry, water and wastewater. Our pump program covers a large spectrum – from complete mining and slurry pumps to process pumps or boiler feed units for large power plants. Valves come in a choice of designs, sizes and materials for a whole spread of applications.

New Products: MDX – Mill Duty Xtra Heavy Pumps.

Other Countries: KSB Australia Pty Ltd is a part of Global KSB Group, which is a world leader in the manufacture of pumps, valves and systems with a presence in almost 30 countries around the world.

Kook Multimedia About: Based on Queensland’s Sunshine Coast with clients across Australia and the world.

Website:

www.ksb.com.au Offices: QLD

Activity: Website: Content Management Software.

Products: Websites, Email Newsletter Manager, E-commerce, ERP Product Manager, Secure Client or Customer Log-ins.

New Products: Search Engine Optimisation (SEO) and Pay Per Click Advertising (PPC or Google AdWords).

Address:

Phone:

13 Hawkins Crescent, BUNDAMBA, QLD 4304

07 3436 8600 07 3436 8699

Fax:

L. C. Loynes & Associates About:

Customised Database applications, e-commerce Websites, Custom Website Development.

L.C. Loynes & Associates was established in Queensland in 1976. It remains a 100% Australian-owned company whose owners work in the business on a daily basis. We specialise in Customs Consultancy and Brokerage with particular focus on the mining, energy and industrial sectors.

Website:

Activity:

www.kook.com.au

Our focus is assisting project proponents and EPC contractors to reduce project costs by planning and implementing Customs Duty minimisation strategies relevant to imported equipment for major projects.

Specialisation:

Offices: Head Office – QLD Address:

Phone:

Suite 202 La Balsa – 45 Brisbane Road, MOOLOOLABA, QLD 4557

07 5477 7990

KSB Australia Pty Ltd About: KSB Australia Pty Ltd is a part of global KSB Group, which is a leading producer of pumps, valves and related systems in the world. Today, KSB has more than 33 manufacturing sites worldwide, with subsidiaries and representatives in over 100 countries. After 135 years of progress, our topquality materials, state-of-the-art technology and highly trained employees continue to guarantee customers the very best products. KSB group of companies includes GIW, a world leader in the design and manufacture of slurry pumps and pumping systems.

Activity: KSB Australia Pty Ltd is a leading producer of pumps, valves and related systems. Our Pumps for the mining industry include slurry pumps with rubber or hard-iron liners, and water and process pumps. Sales offices and repair centres are located in Perth, Brisbane, Sydney, Melbourne, Adelaide, Kalgoorlie, Townsville, Newcastle and Auckland (NZ).

90 • MESCA MEMBERS DIRECTORY VOL 8

Products: Consultancy services: •

Advising project teams (e.g. financial and procurement) on Customs Duty concession opportunities

•

Briefing project stakeholders on Customs Duty concession mechanisms, including Free Trade Agreements, the Tariff Concession Order system and the Enhanced Project By-Law Scheme

•

Advising project stakeholders on procurement practices compatible with Customs Duty concession mechanisms

•

Developing strategic plans for securing Customs Duty concessions

•

Preparing Customs Duty concession submissions to Government.

Customs Brokerage services: •

Advising project teams on import requirements including Customs and Quarantine prohibited and restricted imports

•

Managing pre-shipment cleanliness treatment and inspections of foreign-sourced equipment

•

Managing international freight forwarding via sea and air freight including charters

•

Managing Customs and Quarantine border clearances

•

Managing delivery to site, including heavy haulage and vertical lifting.

Specialisation: Assisting project proponents, EPC contractors and suppliers at all tiers to reduce project costs by planning and implementing Customs Duty minimisation strategies relevant to imported equipment.

MESCA SUPPLIERS Industry Buying Guide

Website:

www.loynes.com.au

Laing O’Rourke, in an exclusive association with Conveyor Dynamics Incorporated (CDI), offers world-leading design and construction solutions for long overland conveyors (including dynamic and viscoelastic analysis).

Offices: QLD

We have delivered more single flight, tight radius curve overland conveyors over difficult terrain than any other contractor in the region.

Address:

Phone:

Fax:

8 Lockhart Street, 07 3393 1888 07 3393 1590 WOOLOONGABBA, QLD 4102

Laing O’Rourke Pty Limited About: Laing O’Rourke is one of the world’s most dynamic and innovative privately owned development, construction and specialist companies. With an operating turnover in the order of $12 billion and around 35,000 employees worldwide, the company aims to build a brighter, better and more sustainable future for the communities it serves.

Activity: Multidisciplined Development and Construction for infrastructure, power, mining, ports, building, oil and gas, and processing industries.

POWER INFRASTRUCTURE Laing O’Rourke has participated in the construction of almost all of the coalfired power stations built in Australia over the past 30 years, incorporating civil works, materials handling systems, boilers and balance of plant. Recently, we have also expanded our capability to deliver gas-fired power projects, turbine installations, electrical systems and control instrumentation.

Website:

www.laingorourke.com.au Offices: QLD Address:

Phone:

Level 4, 192 Ann Street, BRISBANE, QLD 4001

07 3308 7700 07 3308 7666

Fax:

RESOURCES AND MINE INFRASTRUCTURE From feasibility studies to the commissioning of large mine infrastructure projects, our experienced team and proven track record underpin our ability to deliver multidisciplined projects and cost-effective solutions. Built over more than 30 years in the mining industry, Laing O’Rourke has acquired extensive experience in the design and construction of Materials Handling Systems, including conventional, pipe and skyline conveyors, stackers and reclaimers, tunnel reclaim systems, crushing and screening stations, and transfer buildings.

324549A_KSB Australia | 2065.indd 1

19/11/13 10:33 AM

MESCA MEMBERS DIRECTORY VOL 8 • 91

MESCA SUPPLIERS Industry Buying Guide

Larpro Pty Ltd About: We are a company whose focus is managing the processes of project development from project conceptualisation through to completion of construction and commencement of operations. We can provide complete project delivery services or select services in isolation. The company is based in Brisbane, Australia, but has no geographic boundaries to its fields of operation. We have on staff engineers, planners, cost planners, contract administrators, procurement officers and expeditors, and construction supervisors, as well as administrative support personnel. We operate in two main industry sectors (being heavy engineering/ minerals processing and public infrastructure) in both project execution and project consulting roles.

Activity: Project Management specialising in mining infrastructure, minerals processing and public infrastructure projects.

Project processes and procedures are all tailored to the discrete requirements of each project, and we provide project-specific plans and procedures for all projects for which Larpro is providing project delivery services. These are based on industry best practice and incorporate particular owners’ requirements as necessary.

Website:

www.larproprojects.com.au Offices: QLD Address:

Phone:

Fax:

Level 3, Toowong 07 3506 4000 07 3371 3016 Tower, 9 Sherwood Road, TOOWONG, QLD 4066

Laser Central

Other Countries:

About:

Sepon Copper Expansion Project – Laos

Australia’s Premier Laser Cutting Facility.

Larpro was engaged by Minerals and Metals Group (MMG) to provided the bulk of the owner’s construction team for Sepon Copper Refinery Expansion at their existing Copper and Gold mine in the country of Laos. The expansion was restarted in late 2009 following its suspension during the GFC.

Laser Central has been growing from strength to strength since 1998. Commencing business in Sumner Park, Brisbane, we relocated to Richlands, Brisbane. Our new facility is among the best in Australia, allowing ample room for vehicle access, storage of stock and customer materials.

Larpro is providing Construction Management, Construction Supervision, Health and Safety, QA and Field Engineering, Materials Control, and Contract Administration personnel to the owner’s team. MMG are “self executing” the completion of the Expansion and the nature of our personnel reflects this.

Specialisation:

Responsive to your needs, Laser Central aims to be the best. Give us a call to find out what we can do to assist your business to take full advantage of the best in laser cutting.

Activity: Laser Central offers a full range of laser cutting services and metal folding services for sheet and plate.

Project Management specialising in mining infrastructure, minerals processing and public infrastructure projects.

Further, Laser Central has the largest laser tube cutting facility in Australia, handling materials up to 12m long and 300 mm diameter.

We have worked on major coal ports, alumina refineries, coal mine infrastructure projects, coal preparation plants, ethanol refineries, and defence projects, as well as having provided advice on project execution strategies for copper refineries, water treatment plants, elements of oil refineries, electrical substations, and electrical transmission lines.

Products: Flatbed laser cutting: up to 25mm mild steel, 25mm stainless steel, 12mm aluminium.

In situations where we provide project delivery services, we typically include project engineering, construction management, cost control, planning, procurement, contract administration, and document control functions. We also manage the functional activities, such as safety, environment, and community relations support, to provide full project delivery capability.

Tube and Structural Steel: up to 300mm diameter, 12m long, Processing Mild Steel, Stainless Steel and Aluminium, Bevel cutting on mild steel and stainless steel sections.

This systematic approach is consistent with our desire to create a “no surprises” culture in the organisation to afford the level of certainty to our clients that they require as the basis for making their own business decisions. 323698A_Laser Central | 2065 HIGHRES.pdf 1 20/09/13

Specialisation:

Metal Folding Services: short and long runs, 135 tn press brake (x2) 3050mm long.

Flatbet Laser Cutting 11:48 AM and Structural Steel laser cutting Tube

Metal folding.

Laser cutting complex contours and true bevelling of tubular and structural sections in lengths up to 12 metres.

provides market leading laser processing services across plate and structural steel utilizing the latest 3D CAD/CAM software. Laser Central offers precision metal folding and full fabrication processes to suit client needs. Unique in Australia, Laser Central continues to lead the market through innovation and solid working relationships.

1300 7 LASER

Leading edge flatbed laser cutting and laser measured metal folding.

92 • MESCA MEMBERS DIRECTORY VOL 8

Ph: (1300 75 27 37) Ph: 07 3375 6022 Fax: 07 3375 9822 Email: sales@lasercentral.com.au www.lasercentral.com.au 16 West Link Place, Richlands QLD 4077

MESCA SUPPLIERS Industry Buying Guide

Lend Lease i.Power Solutions Pty Ltd

Website:

www.lasercentral.com.au Offices: QLD Address:

Phone:

Fax:

Mobile:

PO Box 239, SUMNER PARK, QLD 4077

07 3375 6022 07 3375 9646 0412 076 222

Offices: QLD

Email: bob@lasercentral.com.au

LCR Group Pty Ltd

Address:

Phone:

Rivergate Marine Precinct, 185 Queensport Road North, MURARRIE, QLD 4172

07 3908 3908 07 3908 3909

Fax:

LogiCamms Limited

Activity: LCR ... Longevity Commitment Reliability... through safety, innovation, expertise and superior service. LCR Group Pty Ltd is an industrial and mining services company providing lift and shift services to Australian and International customers. These services include bulk materials handling, transport, mining and associated industrial services. Predominant components of these services are: •

Bulk/heavy materials handling – Mineral Haulage with off-road road trains

•

Transport requirements for mining and associated industrial services companies

•

Crane Hire up to 500 tonne (including Towers, Mobiles and Crawlers)

•

Labour Hire.

Products: •

Servicing bulk/heavy materials handling needs

•

Crane Hire (including Towers, Mobiles and Crawlers)

•

Mining Services

•

Transport (associated with bulk materials including coal, minerals and rock as well as heavy lifts)

•

Labour Hire.

About: LogiCamms is an ASX-listed, leading provider of engineering consulting, project delivery and asset performance services in Australia and New Zealand. We work with owners and operators of minerals and metals, hydrocarbons and infrastructure assets providing high-quality solutions that reduce costs, increase efficiencies, and enhance the value of customers’ operations. LogiCamms employs 650 professionals providing strength and depth to support our clients across Australia and internationally.

Activity: Our services include: •

Multidiscipline Engineering

•

Process, Civil, Structural, Mechanical, Piping, Electrical, Instrumentation and Control Systems, Hazardous Areas, and Power Systems

•

Project Delivery

•

EPCM/EPC, Design and Construct, Project Management

•

Asset Performance

•

Operational Readiness, Asset Integrity, Operational Excellence, Competency Assurance and Competency Training.

Other Countries:

Other Countries: PNG in country operations support Gas and Mining industry.

Specialisation:

Asia Pacific; South Africa; South America.

Specialisation: Coal

Industrial and Mining Services.

Website:

www.lcrgroup.com.au Offices: Head Office – QLD Address:

Phone:

PO Box 1064, TOOMBUL, QLD 4012

07 3332 0000 07 3332 0099

Fax:

LogiCamms has supported the Coal industry for over 15 years. Our operations in Mackay, Gladstone and Newcastle are ideally located to service clients in these regional coal basins. We have many qualified and experienced personnel working from both these offices, providing fast, reliable and local service. LogiCamms has delivered projects across the full life cycle, from feasibility to design and completions for clients such as Xstrata, Rio Tinto, DBCT, Wesfamers and BMA. We provide regular maintenance support to numerous facilities. Iron Ore LogiCamms has over 20 years’ experience in the Australian iron ore industry, and recently was contracted to deliver services to a South African iron ore mine. We have provided engineering and support services for projects, including plant upgrades and greenfield mines to maintenance and project support. We believe in developing and maintaining long-term relationships with clients, and ensuring we understand the industry and factors affecting our clients’ operations. We provide full support from mine to port including rail and ship-loading support. Mobile Machine Automation – Reclaimers, Stackers and Shiploaders LogiCamms is Australia’s leading machine and stockyard automation specialist. Our services cover unmanned operation of stockyard machines, supported by advanced stockpile management and anti-collision systems that allow machines to operate within 10 metres of each other. All critical protection systems are backed up with multiple redundant equipment. LogiCamms has a long history in providing design support and control system programming for the mining machine industry.

MESCA MEMBERS DIRECTORY VOL 8 • 93

MESCA SUPPLIERS Industry Buying Guide

We have a reference base for over 100 machine projects, including Reclaimers, Stackers, Shiploaders and Stacker/Reclaimers. Our stockpile management software tracks material types to prevent contamination. It also allows for infill stacking to optimise the stockpiles for efficient reclaiming and allows for auto machine relocation. We are also available to provide a consultancy review of your existing systems and provide recommendations based on the industry best practices Specialist Project Delivery for Bulk Materials Handling Systems and Machines LogiCamms Projects was established to expand the traditional LogiCamms electrical design and control systems business to include turnkey mechanical and electrical project capability. The integration of these skills into our management team enables us to undertake significant projects on a design and construct, or procure and construct basis. In association with our established partners, the projects division now provides the comprehensive services required to deliver complete materials handling solutions on a turnkey basis.

Website:

www.logicamms.com.au Offices: VIC Address:

Phone:

Fax:

Level 4, 60 Albert Road, SOUTH MELBOURNE, VIC 3205

03 8639 3200 03 8639 3299

Logiworx About: Logiworx is a supply chain optimisation and logistics specialist, delivering outstanding results for our clients. We provide cost-effective solutions no matter how great the challenge. Our professional team offers combined practical experience and many years’ expertise to empower your business operation. Unlike many larger supply chain consultants, Logiworx provides a personalised service that is second to none. We understand client needs and work closely with you to improve productivity. We have achieved exceptional outcomes for many of Australia’s leading companies.

Activity: Logiworx has achieved exceptional outcomes for many of Australia’s leading companies, including: • Acer Computers • Austar Entertainment • Australia Post • Billabong • Bridgestone • Caltex Australia • Cochlear • Corporate Express • Hagemeyer • Komatsu • LG Electronics • Makita • Mitre 10 • NEC • Nilfisk • Qantas • Siemens • Toyota • Toys R Us. 94 • MESCA MEMBERS DIRECTORY VOL 8

Products: Logiworx offers a broad range of supply chain solutions designed to improve productivity, reduce costs and boost your working capital. We work with you and your team to develop and implement practical, viable strategies. Along the way, we provide full project management to help streamline the transition. Our experienced team uses the latest analysis and modelling tools to quickly and effectively provide a total supply chain solution for your business. Solutions include: •

Supply Chain Network Optimisation

•

Mining Supply Chain Services

•

Inventory Planning and Optimisation

•

Warehouse and Facility Optimisation

•

Transport and Freight Optimisation

•

Supply Chain Process Improvement

•

Supply Chain Systems Alignment

•

Spend Reduction and Procurement.

Specialisation: Logiworx is recognised for its consistently high standard of service and client satisfaction. Our company has successfully completed nearly 170 supply chain and spend management projects for more than 60 leading national and multinational organisations. We offer personalised service and outstanding results gained from many years of collective expertise and experience in the industry. You can view examples of the types of services and capabilities we offer by browsing our website. Simply select a case study to see the benefits that can be achieved using Logiworx. You can search by industry, business issue or service.

Website:

www.logiworx.com.au Offices: NSW Address:

Phone:

Fax:

133 Alexander Street, CROWS NEST, NSW 2065

02 9431 5399

02 9439 2738

Magnetic Automation Pty Ltd About: Magnetic Automation Pty Ltd has been part of the Perimeter Security industry for over 30 years. We are part of the global Magnetic Autocontrol Group, which is a world-leading manufacturer of boom gates, security gates, turnstiles, parking systems and other related vehicle and pedestrian access control technologies. Our experience and global strength allows us to offer our customers both standard and custom user-specific solutions. Since April 2012, the Magnetic Autocontrol Group is part of the FAAC Group. Today in Australia, Magnetic Automation has a presence in every state, with Head Office in Tullamarine, Victoria, and key branches in Western Australia, Queensland, and New South Wales. Our core competence lies in our knowledge of motoR&Drive engineering, as well as our concept and project activities. This is a major advantage in numerous market segments; particularly if stringent requirements are placed on the product. Our globally recognised high standards of quality and the reliability of our products, our competence, customer orientation and market focus, makes us an Industry Leader. With our extensive experience within industrial and commercial applications, we are able to provide customised and stylish solutions to meet our customers’ needs.

MESCA SUPPLIERS Industry Buying Guide

Our products find applications within mining, rail, corporate, government infrastructure, military and general industrial sites. Our product range includes: Boom Gates, Sliding Gates, Swing Gates, Turnstiles, Speed Gates, Pedestrian Swing Gates, Fixed Bollards, Hydraulic Bollards, and Security Rising Steps.

2b. Heavy Duty Cantilever Gate – STG

All our products are supported by comprehensive preventative maintenance, service and spare parts programs.

3. Swing Gate – MSG

Activity:

5. Fixed and Hydraulic Security Bollards.

At Magnetic Automation, we are able to provide our customers with a complete project service, which includes supply, installation, service and maintenance of our full product range.

1. Full Height Turnstile – IP65 Rating – MPP

2d. Cantilever Sliding Gate – MCL 2e. Track Sliding Gate – MTG 2f. Telescopic Track Gate – MTT 4. Retractable Card Reader Bollard

Our products are used in a variety of applications:

PEDESTRIAN ACCESS 2. Pedestrian Pivot Barriers and Swing Gates – MPP Designed to control pedestrians entering or exiting low-security controlled areas.

•

Mining – including remote locations, access roads, staff amenities, facilities and accommodation.

•

High security access control, such as Correctional facilities and Government Institutions.

•

Parking areas – underground and outdoor.

New Products:

•

Recreational facilities – sporting venues, parks, and caravan parks.

Mine Ready Solutions for Vehicular and Pedestrian Access requirements

•

Schools, Hospitals, and gated communities.

Mine Ready:

•

Port Facilities, Ferry Terminals and Airports.

4. Automatic Fare Collection – High Volume.

Corporate offices with high volume pedestrian traffic. •

Rail – Pedestrian and train stabling gates.

•

Commercial – factory/warehouses, technical parks, and distribution facilities.

Products: VEHICLE ACCESS

3. Speed Gate – Retractable Barriers – MPH and MPR

•

Boom Gates with 24 volt configurations, heat shields, and solarpowered options.

•

Full Height Turnstiles with 24 volt configurations and an IP65 Rating to protect against dust and water.

•

Modular Sliding Gates that can be easily installed without special lifting equipment.

•

Retractable Card Reader Bollards, which is gas strut assisted for one person operation.

These Mine Ready designs extend to accommodating large vehicle detection, heat shields for extreme climatic conditions, and solar-powered options.

1. Boom Gates 2. Sliding Gate Range 2a. Modular Cantilever Gate – MHG

MHTM™ MicroDrive Boom Gate

Melbourne

Sydney

Brisbane

Perth

Solutions for your Perimeter Protection

National Sales & Service: 1300 364 864 www.magneticautomation.com.au 325696A_Magnetic Auto | 2065.indd 1

31/10/13 2:07 PM

MESCA MEMBERS DIRECTORY VOL 8 • 95

Other Countries:

a network of distributors and preferred agents, and our Sister Companies around the world, MATO is the market leader.

Germany, USA, Brazil, India, Malaysia, China.

Activity:

Specialisation: Magnetic Automation is the manufacturer of products for the control of pedestrian and vehicular access. Magnetic’s strength is part of a global organisation operating in Australia for over 30 years. Our extensive experience within industrial and commercial applications means we are able to provide customised and stylish solutions to meet our customers’ needs. Our products find applications within mining, rail, corporate, government infrastructure, military and general industrial business.

MATO Australia Pty Ltd is an OEM for Conveyor Belt Maintenance Equipment, supplying Australia and exporting around the world.

Products: MATO Mechanical Belt Fasteners MATO Conveyor Belt Cleaners MATO Ultrasonic Dust Suppression Equipment MATO Belt Cutters

Website:

www.magneticautomation.com.au

MATO Safety Accessories

Offices: Head Office – VIC

MATOSKIRT Skirt Clamps

Address:

Phone:

Fax:

14a Tullamarine Park Road, TULLAMARINE, VIC 3043

1300 364 864 03 9339 2999

MATOTRACK Belt Tracking Equipment MATO Belt Clamps MATOLAG Pulley Lagging Material and Cold Bonding Adhesives.

New Products: Mechanical Fastener Friendly Conveyor Belt Cleaners. Lagging Materials.

Magnum Australia

Other Countries:

About:

Website:

Manufacturing specialised dust suppression and washdown equipment for the mining industry since 1972.

www.mato.com.au

Products:

Offices: NSW

WaterCart Tanks and ancillary Products: •

Water Monitors

•

Spray Head Valves.

New Products: Automated Water Monitors Emergency response Fire fighting Track Crawler, Remote Control Switch boxes, Electric Cannons.

Other Countries: Products can be found in USA, South America, Indonesia, Africa and many more countries around the world.

Website:

www.magnumaustralia.com Offices: VIC Address:

Phone:

Fax:

35 Parkhurst Drive, 03 9801 8433 03 9800 3240 KNOXFIELD, VIC 3180

MATO Australia About: MATO Australia has a long, proud tradition of providing world-class conveyor belt maintenance products to mining and industry attained from over 20 years’ experience. MATO is renowned for our innovative products and excellent customer service throughout the world. Our superior range of Mechanical Fasteners, Conveyor Belt Cleaners, Ultrasonic and Dust Suppression systems, Belt Tracking, Belt Clamping and Safety Accessory products ensure safety and efficiency in mining and industry. With operations in Kurri Kurri, New South Wales, and Mackay, Queensland,

Germany; USA; UK; China.

Address:

Phone:

PO Box 448, KURRI KURRI, NSW 2327

1300 850 795 02 4936 1388

Fax:

McConnell Dowell Corporation Limited About: Formed in 1960 and employing over 8,000 personnel, McConnell Dowell is a world-class engineering, construction and services company operating throughout Australia, Asia, New Zealand, the Pacific and the Middle East.

Activity: EPC project delivery within the Oil and Gas, Mining, Power, Water and Building industries.

Products: The Group offers a broad range of heavy industry engineering, construction and maintenance services in civil, electrical, marine, mechanical, pipelines/ HDD, tunnelling, and underground and building construction service.

Equipment: A fleet of specialist construction plant and equipment. Various fabrication yards in South-East Asia and Australia.

Other Countries: PNG, New Zealand and the Pacific, South-East Asia and the Middle East

Specialisation: EPC project delivery, particularly for challenging and multidisciplined projects.

Website:

Engineering

www.mcconnelldowell.com

•

Technical Specifications

•

Maintenance Manuals

Offices: VIC

•

System Audits

•

Certification.

Address: Level 3, 109 Burwood Road, HAWTHORN, VIC 3122

Phone:

Fax:

03 9816 2400 03 9819 4856

Drafting •

Concept and Budgeting Drawings

•

Prototype Details

•

Workshop Drawings

•

Mechanical

McElligotts Qld Pty Ltd

•

Structural

•

Civil

Offices: QLD

•

Electrical

•

Hydraulic and Pneumatic.

Address:

Phone:

Fax:

78 B Presto Avenue, MACKAY QLD 4741

07 4955 3655 07 4955 4533

Website:

www.mckajj.com.au Offices: NSW

McKajj Services About: McKajj Services continually builds a reputation for providing professional and innovative services to a number of economic markets, including projects within the commercial, manufacturing, construction, industrial and resource sectors. With a demonstrated ability to provide project solutions effectively while also meeting best practice techniques, we provide technical services with the flexibility to suit our clients’ needs.

Activity: McKajj Services is a developing organisation successfully delivering Project Management, Site Supervision, Engineering and Detail Design services. Integrated projects delivered include projects within sectors such as: • Aviation • Bulk Transport • Defence • Energy and Gas • IECEx and AUSEx Scheme • Industrial and Commercial • Manufacturing and Construction • Materials Handling and Processing • Mining and Metal Resources •

Vineyards and Wineries.

Products: Project Management • Project and Supply Coordination • Timeline and Budget Controls • Tender Specifications and Contract Documentation • Calling and Letting Tenders • Civil, Mechanical and Structural Site Supervision / OH&S compliant •

Commissioning scheduling.

Site Supervision • Contractor Management • Site Coordination • Work Practices • Processes and Procedures • Quality and Workmanship • Monitoring of Site Resources.

Address:

Phone:

PO Box 187, BELMONT, NSW 2280

02 4945 4111 02 4945 1070

Fax:

McKenna Hampton Insurance Brokers Pty Ltd Activity: McKenna Hampton is a Boutique Insurance Broker / Risk Advisor with a reputation built over 25 years for providing quality advice and highly personalised service to the wider Business Community. The key personnel have International Insurance experience and many years of practical involvement in the provision of Insurance / Contractual advice relative to Major Resource and Energy Projects in Australia, and in providing tailored Risk Solutions. Products available have been designed to specifically address the needs of Contractors operating in these Fields, and to meet the sometimes onerous and stringent Contractual demands of Principals / Principal Contractors.

Products: While the full range of Insurance products is provided, many through the buying power of IBNA, a National Insurance Broking Network which injects over $2 billion in premium into the Australian Market, specific Policies have been tailored to address perceived needs in: •

Public / Product Liability

•

457 Visa Medical Insurance.

Other mainstream products are: •

Professional Indemnity

•

Contract Works Insurance

•

Motor Vehicle Fleet

•

Workers Compensation

•

Personal Accident and illness.

Additionally, Contractual advice is provided relative to Insurance and Indemnity Clauses and expertise available in Risk Analysis / Profiling, Business Continuity and associated disciplines.

Website:

www.mcham.com.au

MESCA SUPPLIERS Industry Buying Guide

Offices: WA

Offices: NSW

Address:

Phone:

1/41-43 Ord Street, WEST PERTH, WA 6005

08 6142 0000 08 6142 0099

Fax:

Address:

Phone:

16 Callistemon Close, WARABROOK, NSW 2304

02 4924 8248 02 4926 2514

Fax:

McLanahan Corporation

Mechanical Engineers Australia

About:

Established 178 years ago, the McLanahan name is synonymous with highvalue, robust mineral processing equipment built to withstand the everincreasing demands of a global mining industry. From humble beginnings in small town Pennsylvania, McLanahan has pioneered the development of crushing, feeding, sampling, washing and classifying equipment which have revolutionised the mineral processing industry.

In every facet of our operation, we are committed to guaranteeing our reliability, our expertise and our value for money. As a multidisciplined company, our focus is on the quality of what we produce and our service. We aim to meet or exceed our clients’ expectations every time, without fail in a ‘Safety First’ culture, and our highly competent management team is the driving force behind this philosophy.

Today, McLanahan equipment can be found in the major resource producing countries in the region including Australia, Indonesia, India, China and Mongolia. McLanahan’s Australian operation focuses on building custom-made equipment to help customers meet the processing challenges presented by diverse geologies across the region. With such a wide range of equipment, we are fortunate to be able to work with customers recovering diamonds in the Kimberley, Iron Ore operators in the remote Pilbara region or the mining of thermal coal in the rugged and remote regions of Ulaanbaatar.

Activity:

Website:

www.mclanahan.com

Leaders in providing equipment for efficient processing & management for over 175 years

JKari Holdings trading as “Mechanical Engineers Australia” is a privately owned and operated Queensland-based Company offering Mechanical Engineering, Design and Manufacturing to Customers in the mining and resources, power generation, mineral processing and gas/petroleum industries. Mechanical Engineers Australia is a “NATA” Endorsed Third-Party Accredited Company, which is committed to continual improvement.

Products: Mechanical Engineers Australia specialises in areas such as: •

Engineering / Design / Shop Detailing {Mechanical and Structural}

•

Specialised Fabrication – medium (5T) to heavy (100T) {Critical tolerances; Complex designs; special materials}

•

Pressure Piping and Vessel Fabrication to ASME IX, AS4041 and AS1210

•

Heavy Machining and Component Manufacture / Rebuilds

•

Alumina Ceramic Industrial Tiling – Chutes and Hoppers

•

Mechanical Refurbishment / Critical Plant Overhauls

•

Industrial Grit Blasting and Painting – EPA approved

•

Site Projects (Piping/Pumping/Conveying and Materials Handling) – Erection / Installation / Maintenance

•

Premron EBS ‘Closed Conveyor System’

•

Premron CHS ‘Continuous Haulage System’.

New Products: New to Underground Mining and set to revolutionise the Gateroad Development, the Premron CHS ‘Continuous Haulage System’ is an ‘Enclosed Belt System’, which has been proven in above ground installations worldwide. The system uses an enclosed pouch, shaped as a ‘tear drop’ enclosing the payload ensuring ‘dust free’ conveying. This system will be used to remove product from the face and transport the payload directly to the Panel Belt, hence removing the requirement for Shuttle Cars and providing the Australian Coal Industry with a Safe and Continuous Coal Haulage System. The Premron EBS Closed Conveyor System offers a cost-effective method of conveying materials in difficult conditions. It consists of a rubber belt and multiple drive pairs of low-power, strategically placed along the belt which allows low belt tensions and enables the conveyor to be lightweight, flexible and negotiate 90-degree turns at a small radius as well as steep inclines.

Equipment: Property/Land developed 5 700 m2 Uncovered Concrete Floor slab (hardstand) 2 550 m2

The Supplier of Choice for Mineral Processing Solutions

mclanahan.com | sales@mclanahan.com.au

98 • MESCA MEMBERS DIRECTORY VOL 8

Covered Workshop Concrete Floor slab 2 700 m2. Administration and Engineering Offices: 47.2m² x 2 Levels Workshop Permanent Employees: 7 Administration / 20-25 Workshop.

MESCA SUPPLIERS Industry Buying Guide

Specialisation:

Other Countries:

Multidisciplined

Global company with offices and support centres strategically located on six continents.

Focus on Quality and Service Highly competent management Team Major Coal Mining and Power Industry Clients Structural / Mechanical Engineering and Drafting Medium/Heavy Fabricator Medium/Heavy Machine Shop Mechanical Refurbishment / Fitting with Clean Room

Specialisation: Design, manufacture, and deploy critical, high-quality systems for in-mine communications, which promote enhanced productivity, maximise safety, and support process control.

Website:

Thermal Stress Relieving and Heating (In-House)

www.minesite.com.au

Blast and Industrial (In-House) Painting

Offices: NSW

CNC Capabilities.

Website:

www.mecheng.com.au / www.premron.com. au Offices: QLD Address:

Phone:

5 Soppa Street, GLADSTONE, QLD 4680

07 4979 3200 07 4979 3250

Fax:

Address:

Phone:

25–27 Whiting Street, ARTARMON, NSW 2064

02 9437 4399 02 9437 5688

Fax:

MMD Australia Pty Ltd Products: Sizers (Crushers). Apron Plate Feeders. Static / Semi-mobile / Fully Mobile Sizer Stations. Green Mining Solutions.

MECM Environmental Management Pty Ltd Offices: NSW Address:

Phone:

Fax:

34 Mary Street, SHELLHARBOUR, NSW 2529

02 4296 2313 02 4296 1189

Mine Site Technologies Pty Ltd About: Mine Site Technologies (MST) is a global communications leader with 22 years of experience in the design, manufacture, and deployment of critical, high-quality integrated mine communications systems.

Activity: Global leader in the design, manufacture, and deployment of critical, highquality, systems for in-mine communications targeting productivity, safety, and control.

Products: Impact Wireless Networks (Hard Rock and Coal), MinePhone (VoIP), ICCL (Integrated Communications Cap Lamp), VDV (Leaky Feeder), Proximity Detection, PED (emergency comms and blast initiation systems), Personnel and Vehicle Tracking, MineDash Software (data collection).

New Products: The Impact system is widely installed globally. It’s newness stems from the fact that its design allows nearly unlimited expansion and add-on capabilities.

Equipment: In-mine communications equipment for voice, data and video transmission, personnel and vehicle tracking, and information and data capture for production and process control. We target productivity, safety, and control in the design and application of all of our communication systems and components. 100 • MESCA MEMBERS DIRECTORY VOL 8

Other Countries: UK. USA. South Africa. China. Brazil. Canada. Columbia. India. Indonesia. Mexico. Thailand. Venezuela.

Specialisation: Bespoke material handling systems design and supply specific to an individual customer’s requirements.

Website:

www.mmdsizers.com.au Offices: NSW Address:

Phone:

16 Prince of Wales Avenue, UNANDERRA, NSW 2526

02 4271 8011 02 4271 8314

Fax:

MM Electrical About: MM Electrical merchandising is one of the leading distributors of electrical and data components and equipment in Australia. Established in 1916, our parent company, Metal Manufactures Limited (MML), has grown into a large and diverse Australian company.

Activity: Supplying over 400,000 electrical maintenance items to General Industry, Heavy Industrial and the Communications and Data markets. Through our local and international supplier affiliations, we can competitively source and supply virtually any electrical products that our customers require. We regard stock profiling towards customers’ requirements as a major strength of our company.

Products: Construction and Power Cables, Mining and Elastomeric Cables, Communication and Data Cables, Mining and Flameproof Accessories, Motors and Motor Control Devices, Wiring Accessories, Test Equipment,

MESCA SUPPLIERS Industry Buying Guide

Offices: QLD

Contractor Sundries, Comms and Data products, Circuit Breakers, Lighting and Lighting Controls.

New Products: LED Lighting.

Equipment: The overall market segments that MMEM operates within are: electrical contractors, data and communications installers, mro and industrial maintenance and commercial and major projects.

Address:

Phone:

Level 6, 19 Lang Parade, MILTON, QLD 4064

07 3368 6700 07 3368 6777

Fax:

Mono Pumps

Specialisation: MMEM is a recognised industry leader in management of period contracts and partnership agreements. Currently, we hold Supply Arrangements with a large number of major Industrial companies, including strategic agreements with best practice enterprises in all sectors.

Offices: VIC Address:

Phone:

Fax:

338-348 Lower 03 9580 5211 03 9587 8028 Dandenong Road, MORDIALLOC, VIC 3195

Website:

www.mmem.com.au Offices: National Office – NSW Address:

Phone:

Fax:

19-21 Loyalty Road, NORTH ROCKS, NSW 2151

02 8839 9000 02 8839 9099

Add1 _Edit.pdf

Mobile Conveying Services Pty Ltd Offices: QLD Address:

Phone:

618 Old Gympie Road, NARANGBA, QLD 4504

1300 665 409 1300 665 438

Fax:

Monadelphous Group Limited

14/11/13

11:53 AM

MM ELECTRICAL AND DATA SUPPLIERS www.mmem.com.au

MM Electrical Merchandising is one of the leading distributors of electrical and data components and equipment in Australia Our core product range consists of the following categories:

Activity:

Construction & Power Cables Mining & Elastomeric Cables Communication & Data Cables Mining & Flameproof Accessories Motors & Motor Control Devices Wiring Accessories Test Equipment Contractor Sundries Comms & Data Products Conduits/Ducts/Supports Commercial & Industrial Lighting Terminating/Insulation Accessories Security Systems Circuit Protection Lamps Appliances – Domestic & Commercial

Engineering Construction – provides large-scale, multidisciplinary project management and construction services to the iron ore, coal, minerals processing, oil and gas, electrical and instrumentation, power and marine sectors.

Access our 240 branch locations and contact details through our website at www.mmem.com.au

About: Monadelphous is a leading Australian engineering group providing construction, maintenance and industrial services to the resources, energy and infrastructure sectors. An ASX-100 company, Monadelphous has earned an enviable reputation for the successful delivery of a wide range of projects for customers throughout Australia.

Maintenance and Industrial Services – providing comprehensive, multidisciplinary maintenance and improvement solutions, including maintenance services, sustaining and minor capital works, shutdowns, and operations, and facilities maintenance.

Other Countries:

AT MMEM WE VALUE HIGH INTEGRITY...COMMITTED RELIABILITY...AND QUALITY CUSTOMER SERVICE

327407A_MM Electrical | 2065.indd 1

14/11/13 11:57 AM

PNG; China; Mongolia.

Website:

www.monadelphous.com.au

MESCA MEMBERS DIRECTORY VOL 8 • 101

MESCA SUPPLIERS Industry Buying Guide

Morris Corporation About: Morris Corporation (Aust) Pty Ltd, is an Australian-owned Industrial Hospitality and Support Services company, specialising in servicing the Mining, Construction, Defence, Education and Health Services Industries. Morris Corporation’s continued growth positions the company well to meet the many challenges and opportunities presented by the new century within the resources sector. We pride ourselves on delivering operational challenges that other companies find too challenging to handle. The company philosophy is to be selective in choosing its clients with a view to build long-term mutually beneficial relationships with common goals and expectations, and continually strive for excellence based on service first, profit second.

Activity: Catering Services Housekeeping Services

Offices: WA Address:

Phone:

Unit 1/46 Hasler Road, OSBORNE PARK, WA 6017

08 6389 2555 08 6389 2522

Fax:

Moultrie Group About: Established over 15 years ago and employing over 200 personnel, Moultrie Group is a leading technical and professional service provider to the Australian and international exploration, mining and infrastructure sectors.

Activity: Technical and professional service provision to exploration, mining and infrastructure sectors.

Janitorial Services

Products:

Buildings Maintenance

Geology, Database and modelling, Survey and spatial services, Civil and environmental engineering design, Equipment hire and maintenance, Mine site services, Polyethylene pipe installation, Coal bed methane management, Earthworks and rehabilitation services, Safety and training.

In-flight Meals Facilities Management Accommodation Management Laundry Services Grounds Maintenance Airport Management Warehousing

New Products: Near Surface Geophysics, Slim borehole scanning, Photogrammetry services, Turnkey exploration management, Landowner/stakeholder negotiation, Compensation agreements, Senior Site Executive (SSE) services.

Management Logistics.

Website:

Products:

www.moultrie.com.au

Remote Site Catering

Offices: QLD

Camp Management Facilities Management Security Services Building Maintenance

Address:

Phone:

919 Nudgee Road, 07 3237 1200 BANYO, QLD 4014

Grounds Maintenance Janitorial Services Housekeeping Services Laundry Services Accommodation Management Warehousing In-flight meals Management Logistics.

Equipment: Morris Corporation offers a unique Total Facilities Management Service, providing clients with inclusive service packages. These packages include, but are not limited to: •

Catering Services

•

Accommodation Management

•

Housekeeping Services.

Specialisation: Remote Site Catering; Camp Management; Facilities Management; Security Services; Building Maintenance; Grounds Maintenance; Janitorial Services; Housekeeping Services; Laundry Services; Accommodation Management; Warehousing; In-flight Meals.

Website:

www.morriscorp.com.au

102 • MESCA MEMBERS DIRECTORY VOL 8

MRC Piping Systems Australia About: MRC is focused on Mining and Mineral Processing: End Markets – Mining Production Slurry Pipelines Mineral Processing Water Treatment. Key products and services – Full PVF Offering Project Logistics and Materials Management Quality Assurance Programs Product and Technical Consulting Material Verification PVF Component Fabrication to Order Matched Pipe and Coupling Systems Manifolds and Pressure Reducing Stations.

has the right answers for you… … whether you want to buy or hire mobile conveying equipment 1 / Up to 4500 tph, 58 m reach 2 / Models to suit rear, bottom & side dump trucks & trailers 3 / Up to 70 m of conveyor rapidly deployed from a roadable trailer 4 / 152 m of conveyor carried on a single trailer

5 / Up to 73 m of conveyor in a single load, set up in 10 minutes 6 / Up to 68 m of piggyback conveyors carried in a single load 7 / 11 models, 12-45 m conveyor length 8 / 23 m of conveyor, folding head & tail sections

1 / TeleStacker® Conveyor

2 / RazerTail® Truck Unloader

3 / Extender™ Conveyor

4 / Trailblazer™ Conveyor

5 / Slide-Pac™ Conveyor

6 / Stack-Pac™ Conveyor

7 / Portable Radial Stacking Conveyor

8 / Geotrek™ Tracked Conveyor

1 / Diesel or electric, self-jacking for cleaning 2 / Diesel, walks on & off tracks, jacks for loading onto transport 3 / Electric, fold-down ramps 4 / Electric, sliding plate system feeding discharge belt, supports 15 m of material

1 / RUMig In Ground Train Unloader 2 / RUM Portable Train Unloader

3 / ST Portable Truck Unloader

4 / RC Stockpile Reclaimer

or engage contract services

CONTRACTING

1 / Ship & barge loading 2 / Placing material in confined spaces 3 / Placing material where environmental or safety reasons prevent direct dump access 4 / Pulling material from below ground excavations to load trucks

Mobile Conveying Services Cnr. Steel Street & Boundary Road Narangba QLD 4504

Ph: 1300 665 409 Fax: 1300 665 438

Email: enquiries@mobileconveyors.com.au

www.mobileconveyors.com.au

MESCA SUPPLIERS Industry Buying Guide

MRC is focused on the Oil and Gas Industry: End Markets – Production Processing and Transmission

Website:

www.mrcglobal.com Offices: QLD

Refining and Chemical

Address:

Phone:

LNG.

285 Lavarack Avenue, EAGLE FARM, QLD 4009

07 3860 3300

Key products and services – Full PVF Offering Project Logistics and Materials Management Quality Assurance Programs Product and Technical Consulting Material Verification Valve Automation.

Activity: MRC is the largest global distributor of pipe, valves and fittings (“PVF”) and related products and services to the mining and energy industry based on sales. Globally, we provide best-in-class products and services to over 12,000 customers utilising 410 service locations in 18 countries. With 20 locations, 365 employees, $70 million in inventory across Australia and a complete line of PVF products, MRC provides the benefits of a global company, with local support to meet your daily needs. We believe the value-added services we provide to our customers, together with our extensive product offering, global footprint, quality and safety programs, and efficient distribution capabilities, serve to solidify our longstanding customer relationships and drive our growth. As a testament to our capabilities, we have an average relationship of over 20 years with our top 25 customers.

Products: Full range of pipes, valves and fittings in many and various materials options: Carbon Steel Low-Temp Carbon Steel

MTU Detroit Diesel About: As a 50/50 joint venture between Tognum AG and Daimler AG, MTU Detroit Diesel Australia operates independently to service Australian equipment manufacturers and customers. MTU Detroit Diesel Australia has many years of experience in distributing and servicing engines for mining applications, specialising in dump trucks, excavators, drilling equipment, and lighting towers.

Products: Our most common engine in mining is the Series 4000, which was the first in its class that featured common rail fuel injection. In the 13 years since its introduction, the Series 4000 has become the benchmark engine of its class. The Series 60 engine is installed in a wide range of trucks and loaders, whilst the Mercedes OM range has more recently been installed in underground drill rigs, utility vehicles and, most recently, underground loaders. With average surface mining engines operating for 6000 hours per year, MTU Detroit Diesel Australia has set itself apart from other engine distributors by developing technology to allow engines to meet all emission requirements and deliver the best fuel efficiency. These features are why our Detroit Diesel engines are so successful in off-highway applications.

High-Yield Carbon Steel

Website:

Stainless Steel

www.mtudda.com.au

Duplex Super Duplex

Offices: QLD

High Nickel Alloy

Address:

Phone:

Titanium.

Locked Mail Bag 60, RICHLANDS, QLD 4076

07 3877 6060 07 3877 6092

Other Countries: MRC is the Largest Distributor of PVF products Globally with over 410 global service locations in: Australia; Belgium; Canada; China; Finland; France; Germany; Indonesia; Italy; Kazakhstan; Netherlands; New Zealand; Singapore; South Korea; Thailand; United Arab Emirates.

Specialisation: Project Execution Expertise MRC has a proven and transparent Execution Plan and Sourcing Strategy to supply approved materials to your Project. We will work with you to develop a project-specific material supply strategy to achieve the lowest cost for the project. Our sourcing strategy to achieve the lowest cost for your project includes using our leverage with multiple approved manufacturers to competitively bid your bulk requirements. In addition, our material management system allows us the ability to manage the logistics of materials to multiple delivery points. We can effectively manage product standardisation and compliance to a project’s ASL, as well as capture cost savings through identification of alternate materials / manufacturers. MRO Capabilities MRC is the right partner to assist customers in meeting project objectives. When combined with MRC’s MRO Capabilities, our customers realise additional benefits of a single source supplier. MRC welcomes the opportunity to further discuss our MRO value-added services and the benefits associated.

104 • MESCA MEMBERS DIRECTORY VOL 8

Fax:

Multiskilled Resources (Australia) Pty Ltd About: MRA provides Electrical and Automation Engineering solutions to the mining, water, rail, power, oil and gas industries. Renowned for setting industry benchmarks as vibrant and innovative leaders, MRA provides expertise in electrical and control system design, commissioning, function and maintenance throughout Australia and internationally. With a constantly expanding portfolio, MRA specialises in multiple engineering design solutions in a range of disciplines that include: •

Electrical Engineering

•

Control Systems Engineering

•

Industrial Software

•

Electrical Drafting

•

Hardware Design

•

Project Management

MESCA SUPPLIERS Industry Buying Guide

•

Asset Management

•

Automation

Nalco Australia

•

Earthing design and analysis

•

Power system design and analysis

About:

•

Safety Systems (SIL)

•

Plant Optimisation

•

Commissioning

•

Drive Systems

•

IT Solutions

•

Specialist Designs

•

Mobile Machine Audits

Our expertise in the diverse range of industries, some of which are referenced below, allow us the opportunity to offer unique services and programs to help meet our customers’ ever-changing needs and environmental compliance expectations.

•

Hazardous Area Assessment.

Mining and Mineral Processing

Industries We Serve Nalco provides water treatment, process-focused programs, and emissions reduction across a broad range of end users. Our offerings are organised according to the markets we serve so we can address the unique drivers faced by each industry segment.

Established in 1998, MRA has experienced rapid growth with a workforce of more than 70 specialist engineers and administration staff.

Energy, Oil and Gas

Based in Newcastle, New South Wales, and Mackay, Queensland, MRA is proudly Australian-owned.

Chemicals

Activity:

Natural Gas Processing

MRA has skills and experience in the following fields of expertise:

Biofuels Pulp and Paper Power Generation

•

Electrical Engineering

Primary Metals

•

Control Systems Engineering

Applications.

•

Industrial Software/Hardware

•

Management Disciplines

•

Plant Optimisation

•

Asset Management

•

Risk Management and Safety Systems

We understand how manufacturing processes and water, energy and air systems work, and how our services and technologies can positively impact them. We are always exploring new ways to serve our customers better and create value for them through reducing their total costs of operation. You will find that Nalco’s expertise and years of experience in the applications listed below is unparalleled in today’s marketplace.

•

Support Services.

Activity:

Products: •

Automation and Control

•

Earthing design/analysis

•

Power System design/analysis

•

Asset Management

•

Safety System (SIL)

•

Plant Optimisation

•

Commissioning

•

Project Management

•

Drive Systems

•

Specialist Design.

Nalco Company is the world’s largest sustainability services company focused on industrial water, energy and air applications. We help our customers reduce energy, water and other natural resource consumption, minimising environmental releases while boosting the bottom line. Through our sales, service, research and marketing team of more than 7,000 technically trained professionals, we serve nearly 50,000 customer locations in over 150 countries.

Products: Nalco provides a wide range of products, equipment and services for boiler and cooling water applications, membranes, raw water clarification and wastewater treatment, re-use and recycling. Nalco also provides products, equipment and services for process situations, such as mining, oil and gas recovery and refining, and pulp and paper, where water has to be managed.

Specialisation: Electrical and Control Systems engineering solutions and services.

Other Countries: Nalco is active in 150 countries worldwide.

Website:

www.mra.com.au Offices: QLD Address:

Phone:

5/15 Carl Street, RURAL VIEW, QLD 4740

07 4969 7000

Website:

www.nalco.com Offices: QLD Address:

Phone:

Unit 2, 18 Brandl Street, EIGHT MILE PLAINS, QLD 4113

07 3340 7700 07 3841 3577

Fax:

MESCA MEMBERS DIRECTORY VOL 8 • 105

MESCA SUPPLIERS Industry Buying Guide

NationWide Hire About: Led by CEO Stephen Barnard and National Sales Manager, Grant Harrison, NationWide Hire is Australia’s leading provider of off-road and projectspecific trucks’. Because of the wide range of vehicle types and size, their modern fleet has been used in most market sectors; especially the civil, construction and mining industries. They have provided fleets for most major Australian pipeline projects since 1996. The company has a strong reputation for fleet innovation and has recently introduced a number of new concepts to the pipeline and construction industries. These include 4x4 crew carriers with options from 7, 10, 18 and now 30 seaters, helping to move project staff in comfort and with high levels of safety. NationWide Hire offers national coverage from branches in the Hunter Valley, Rockhampton, Perth, Geraldton, Miles, Darwin and Brisbane, which means we can provide a tailored and customised proposal to cover any site or project – no matter when it is required throughout Australia. Our fleet of modern vehicles is maintained “in-house” to ensure the quality and reliability of the fleet is not compromised.

Activity: Vehicle Hire Industry.

Products: Flatbed, crane truck, water truck, fuel truck, lube/service truck, tilt trays, tippers, fitters rigs in 4x2, 4x4, 6x4, 6x6, 8x4 and 8x8 configurations, plus 4x4 buses and light vehicles. The fleet is covered by the National Heavy Vehicle Accreditation Scheme, so clients can be assured of the quality and reliability of the hire fleet.

Equipment: Their comprehensive range of Project-Specific trucks now includes: Flatbed, crane truck, water truck, fuel truck, lube/service truck, tilt trays, tippers, fitters rigs in 4x2, 4x4, 6x4, 6x6, 8x4 and 8x8 configurations, plus 4x4 buses and light vehicles. The fleet is covered by the National Heavy Vehicle Accreditation Scheme, so clients can be assured of the quality and reliability of the hire fleet.

Specialisation: Project-Specific off-road Vehicle Hire. The Fleet is now covered by National Heavy Vehicle Accreditation Scheme, so clients can be assured of the quality and reliability of the hire fleet.

globe for its industry-leading fleet management solutions. The company is continually in the press discussing key issues affecting businesses, government and individuals. Navman Wireless actively evolves its offerings to suit local market conditions. Navman Wireless partners with other world-leading technology providers to bring its customers the best solutions for their business. The GPS fleet tracking provider has a longstanding partnership with Google, is a Microsoft Partner, a Telstra M2M Gold Partner and is an Iridium Satellite Communications Value Added Reseller. Its local partnership with Telstra also allows customers the option to add the GPS tracking solution to their monthly Telstra bill. Navman Wireless is a highly reputable and respected brand, and customers are assured they can trust their business with Navman Wireless’ products.

Activity: The Navman Wireless GPS fleet management and tracking solution provides an In-Vehicle Monitoring System (IVMS) with near real-time and historical visibility to locate, monitor and manage vehicles and assets. Navman Wireless’ vehicle tracking solution utilises the Telstra Next-G or Iridium satellite network in remote locations to allow constant communication with workers. Driver safety, vehicle and asset maintenance, and utilisation can be monitored and managed, on or off highway, allowing customers to ensure compliance with work, health, safety and company regulations. For more than ten years, Navman Wireless has been providing GPS Fleet Management and Tracking Solutions to transport, utility and service organisations, improving the margins of more than 14,000 customers across four continents by reducing costs, increasing productivity, improving customer service and providing peace of mind.

Products: Navman Wireless prides itself on evolving and delivering solutions that cater for specific industry demands. Constantly tailoring its offering to meet the needs of an evolving market, Navman Wireless understands how industry changes affect businesses throughout the fleet and mining industries, and respond with products that alleviate the pressure on managers as they look to comply with legislative changes while delivering a profitable return. Navman Wireless has a broad portfolio of fleet-management products based on GPS technology, which includes service and transport companies, municipal governments, mining and construction organisations, and any industry with a company-owned fleet. •

OnlineAVL2: OnlineAVL2 (automatic vehicle locater) is Navman Wireless’ award-winning fleet management software application that provides managers with real-time insight to monitor, manage and communicate with their fleet. It is accessible via desktop, laptop or on mobile devices (Android, iPhone) via Navman Wireless’ Mobile App.

•

Qube: Qube is Navman Wireless’ dependable onboard device that discretely tracks each vehicle in your fleet. Combined with OnlineAVL2, it is a powerful analytical tool that provides the most comprehensive insight into fleet operations.

•

Satellite Communication: In instances where the vehicle travels outside of cellular coverage, the Satellite Communication device will automatically connect to the Iridium satellite network to ensure high-priority events of your vehicles’ location and activity are still communicated to you so you have real-time visibility in even the most remote regions of Australia.

•

Navman Wireless Australia

Qtanium: The most rugged and durable tracking device on the market, designed specifically for heavy-duty usage.

•

About:

Mobile Data Terminal: A simple in-vehicle messaging terminal that facilitates easy and affordable two-way communication.

•

M-Nav: A vehicle-based messaging and navigation solution which provides easier communication between the office and mobile staff, as well as providing navigation assistance to your drivers.

Website:

www.nationwidehire.com.au Offices: QLD Address:

Phone:

Lot 148 Dawson Street Industrial Estate, MILES, QLD 4415

1300 883 299

Navman Wireless boasts a proud history of over 24 years. Founded in New Zealand by Peter Maire in 1988, the company has evolved from its roots as a marine GPS solutions provider to introduce its first fleet tracking products in 2001. The company was acquired by Brunswick Corporation in 2003, who sold its share four years later. The Navman Wireless brand was officially born in 2007 following the buyout from Brunswick by senior management, backed by Chicago-based private equity firm Priairie Capital. Together, they have built the independent company into a market leader in fleet tracking. Since 2007, Navman Wireless has received numerous accolades across the

106 • MESCA MEMBERS DIRECTORY VOL 8

New Products: Qube 4 tracking device Satellite Communications device, allowing you to monitor and manage your vehicles, equipment and employees even out of cellular coverage. M-Nav 800 messaging and communication device.

MESCA SUPPLIERS Industry Buying Guide

Other Countries:

Equipment:

Globally the company tracks more than 150,000 vehicles across Australia, New Zealand, Fiji, England, Ireland, Scotland, Italy, Spain, Denmark, the United States, Canada, Mexico, Chile, Taiwan and China.

NEPEAN Engineering is continually upgrading its equipment, and our facilities are some of the most modern available today. The technology we utilise is “state-of-the-art”, incorporating CAD systems such as Catia, X-Steel, Autocad, Mechanical Desktop and Inventor, through to Solid Model 3D CAM systems with Powermill (3 seats).

Website:

www.navmanwireless.com.au Offices: Head Office – NSW Address:

Phone:

Giffnock Avenue, 1300 477 353 MACQUARIE PARK, 1300 GPS FLEET NSW 2333

NEPEAN Mining About: At NEPEAN Mining, our vision is to be the chosen partner for high-value, innovative and sustainable solutions for the world’s mining companies. Through our specialist mining companies, we have the capability to supply fully integrated turnkey mining systems.

Activity: Our five specialist capabilities are: Conveyors, Longwall, Power and Electronics, Gas, Site Services, light towers and Brake testing. Our Mining capability is further enhanced through NEPEAN Engineering and Innovation, which has one of the largest and most comprehensive engineering facilities in Australia. NEPEAN Conveyors has grown to become one of Australia’s most successful suppliers of large-scale, fully integrated mining conveyor projects. We offer complete engineered turnkey conveying and materials handling solutions for surface mining, underground coal, hard rock mining, port facilities and process plants. NEPEAN Longwall designs, engineers and manages the construction and delivery of complete longwall mining systems. Longwall also offers maintenance, refurbishment and upgrades for a suite of underground longwall equipment, including roof supports, armoured face conveyors, stage-loaders, crushers, panlines and bootends.

Equipment includes laser cutting with twin 4 metre beds capable of cutting Stainless Steel Plate and Aluminium plate up to 10mm in thickness; 12 CNC machines with up to 6m beds; CNC lathes, wire and profile cutting. From Wire Cutting to High Speed Machining, Nepean can offer a vast range of manufacturing equipment services whether medical, scientific, plastic injection, silicon moulding, marine technology, aerospace, automotive or any other specialised tool design requirement. Nepean can assist from concept design right through to commissioning the project.

Other Countries: South Africa.

Specialisation: High-end design and construction of special purpose machinery. The capability to handle major infrastructure fabrication for mining through to highly sophisticated and precise fabrication and rigging for commercial construction.

Website:

www.nepean.com Offices: NSW Address:

Activity: Supply and Installation of HDPE pipe.

Products:

NEPEAN Gas designs, engineers, procures, constructs, manages and maintains mine methane drainage equipment. Gas has a range of surface plant and equipment control system applications to suit your unique mine methane needs.

Cyclone Overflows.

VIS-Check – Highly optimised mine spec brake testing for on- and offhighway vehicles.

Products: Turn-Key fully integrated mining conveyor systems Turn-Key Longwall mining and coal clearance systems Mining power and electrical systems Diesel Powered Light Towers Mine vehicle brake testing equipment Custom Design Machining and Precision Tooling Fabrication Surface Treatment Structural Rigging Services Laser Cutting.

Fax:

Newcastle Industrial Plastics

NEPEAN Power is a market leader in design, manufacture, supply and overhaul of mining and industrial electrical equipment. Power is recognised for a strong engineering capability, diversification, innovation and customer service for the supply of safe fit-for-purpose solutions ranging from highvoltage infrastructure through to process control electronic equipment, customised to individual requirements.

NEPEAN NightOwl – Diesel-powered mine spec light towers.

Phone:

23 Graham Hill Road, 02 4646 1511 02 4648 2505 NARELLAN, NSW 2567

High Density Polyethylene Pipe (HDPE).

New Products: Reducing Tees for tailing distribution

Website:

www.blackpoly.com.au Offices: Head Office – NSW Address:

Phone:

Fax:

8 Mangrove Road, 02 4967 1922 02 4967 1785 SANDGATE, NSW 2304

MESCA MEMBERS DIRECTORY VOL 8 • 107

MESCA SUPPLIERS Industry Buying Guide

Nexans Olex Australia Offices: QLD Address:

Phone:

Fax:

541 Bilsen Road, GEEBUNG QLD 4034

07 3259 2600 07 3259 2606

Products: 1 – Wavelength (pseudo dark fibre) – High bandwidth connectivity between sites 2 – E-line/E-Trunk – Ethernet services over fibre-optic cable 3 – Internet – High speed internet over fibre-optic cable.

New Products:

Nexium Telecommunications About: Nexium Telecommunications is a solely owned subsidiary of Ergon Energy Corporation Ltd and a provider of wholesale telecommunications services throughout regional Queensland. Launched in 2004, Nexium offers resilient services to regional Queensland centres and many remote mining locations. Together with our other infrastructure partners, Nexium provides competitive solutions where noone else can. The availability of world-class, competitively priced, fibre-optic telecommunications means that companies can now connect their operations in regional areas, with the confidence that they can stay in touch with the rest of the world. Nexium is a licensed telecommunications carrier and is bound by the requirements of the Australian Communications and Media Authority (ACMA) and under the Telecommunications Act (Cth) 1997.

Factory built solutions – Through Ergon’s Energy Solutions division, Nexium provides specially built cabins/telecommunication huts/shelters/stores/data centre housing/modular substations/SES type response shelters all built to order and designed to suit individual requirements. Whether that is an earthquake rating, cyclone rating or just a standard hut, we have the ability to provide the solution you require. For further details please contact us on 1300 793 976 or Email – sales@nexium.net.au

Website:

www.nexium.net.au Offices: QLD Address:

Phone:

61 Mary Street, BRISBANE, QLD 4000

1300 798 976

Activity: Our services include high-capacity links between remote locations, back to regional towns or capital cities. Nexium provides dedicated commercial grade connectivity to regional locations that is physically diverse from mainstream carriers, improving redundancy and disaster recovery and allowing an improved duty of care to employees located in remote locations.

A winning partnership We are a partner you can rely upon and trust to help you achieve quality results in the areas of safety, production, efficiency and compliance.

NHP ELECTRICAL ENGINEERING PRODUCTS PTY LTD

EASY TO DO BUSINESS WITH

327511A_NHP | 2065.indd 1 108 • MESCA MEMBERS DIRECTORY VOL 8

Sales 1300 NHP NHP | nhp.com.au |

NHPMESCAPARTSHIPADV

NHP is a proudly owned Australian company with over 40 years of service and experience in the fields of Automation, Motor Control, Power Distribution, Safety and Hazardous Area solutions.

31/10/13 2:43 PM

MESCA SUPPLIERS Industry Buying Guide

NHP Electrical Engineering Products Pty Ltd About:

•

Open Fieldbus I/O

•

Industrial PCs

•

Energy Meters

•

Motion Control.

Safety and Protection

An Australian-owned company, NHP is committed to serving the Australasian industry with quality products and customer support. This is achieved through a 650-plus strong team, which is distributed across branches and regional locations throughout Australia and New Zealand.

•

Machine Guarding Interlocks

•

Emergency Stop Devices

•

Programmable Safety Devices

NHP is far more than a component supplier, offering systems and solutions, which ‘Value Add’ to products in a way which makes them ‘Fit for Purpose’. NHP incorporates the world’s best and most extensive range of low-voltage products into customer-focused application solutions.

•

Safety Controllers and Relays

•

Ex Safety Devices

•

Limit Switches.

At NHP, we value and care for our customers, and support them by offering personalised service and assistance to meet their every need and demand. We have a strong customer focus and look to provide the right product and product solution for our customers’ requirements and applications, all at a competitive price. Our customers can have 100% confidence in our ability to support them when and where it is needed. Put simply, NHP is ‘easy to do business with’.

Activity: NHP Electrical Engineering Products Pty Ltd brings together leading products, systems and solutions from across five key electrotechnology sectors – Motor Control, Power Distribution, Hazardous Area Equipment and Control, Enclosure Systems and Power Quality, and Automation and Safety. An Australian-owned company, NHP is committed to serving Australasian industry with quality products and the best in customer support.

Products: Our product offerings encompass the key areas of: Motor Control •

Contactors

•

Overloads

•

Motor Starters

•

Motor Protection Relays

•

Soft Starters

•

Variable Speed Drives.

Control and Switching •

Relays

•

Timers

•

Switches

•

Pushbuttons

•

Indicators

•

Control Products.

Power Distribution •

Air Circuit Breakers

•

Moulded Case Circuit Breakers

•

Miniature Circuit Breakers

•

Residual Current Devices

•

Distribution Panelboards

•

Transfer Switches

•

Load Break Switches

•

Fuse Gear.

Power Quality •

Power Factor Correction Units and Components

•

Surge Suppression

•

Power Supplies.

Automation and Communication •

Visualisation and Control Software

•

Programmable Logic Controllers

•

Operator Panels and Touch Screens

Sensing and Detection •

Limit and Proximity Sensors

•

Beam and Fibre-optic Sensors

•

Level Controllers.

Monitoring and Display •

Warning and Signalling Systems

•

Measuring Instruments

•

Monitoring Relays.

Hazardous Location •

Hazardous Location Explosion

•

Protected Control Gear

•

Terminals

•

Switchgear.

Enclosures and Termination •

Insulated and Metal Enclosures

•

Enclosure and Climate Control

•

PVC Cable Ducting

•

Terminals and Connectors

•

Busbar – Insulators/Connectors.

Website:

www.nhp.com.au/ Offices: Headquarters – VIC Address:

Phone:

Fax:

43-67 River Street, 03 9429 2999 03 9429 1075 RICHMOND, VIC 3121

nkt Cables Australia Pty Ltd About: nkt cables has been operating in Australia for only a few years. We were formerly known as AUSSA Power products until nkt cables purchased the business. nkt cables is one of the top 100 cable companies in the world. Dedicated cable manufacture is carried out in Europe and China.

Products: MV/HV Cables and Accessories MV/HV Turnkey Solutions MV/HV Jointing and Installation Team MV/HV Terminations and Joints.

New Products: Smart grid technology.

Other Countries: Global presence through either sales or manufacturing facilities.

MESCA MEMBERS DIRECTORY VOL 8 • 109

MESCA SUPPLIERS Industry Buying Guide

Specialisation: Customised MV and HV cable solutions with competitive leadtimes and MOQs. High-grade Silicone Terminations, which provide easy installation with minimal parts. A highly experienced jointing team with own van and A/C joint bays.

Website:

NLT Australia is an Australian Pty Ltd company and a subsidiary of the Canadian NL Technologies out of Toronto, Canada. NL Technologies also have an office in Santiago Chile and have been in business for almost 30 years. NL Technologies is owned by Levitt safety, the largest privately owned safety business in Canada. Directors of NLT Australia:

www.nktcables.com.au

•

Tim Haight – MD NLT Australia

Offices: QLD

•

Heidi Levitt – President NL Technologies

•

Bruce Levitt – CEO Levitt Safety.

Address:

Phone:

Fax:

Unit 12, 191 Hedley Avenue, HENDRA, QLD 4011

1300 458 112 1300 481 885

NLT Australia Pty Ltd About: NLT Australia Pty Ltd was formed in Jan 2005 by Tim Haight. The company has grown from sales and support operation based in Queensland to its current Engineering, manufacture and service operation. NLT Australia now consists of a Manufacturing facility in Brisbane with staff of approximately 20 people. NLT Australia also has satellite offices in: •

Mackay QLD

•

North Shore Sydney NSW

•

Kalgoorlie WA.

Activity: IT and Mining Experience History: NLT Australia was incorporated originally specifically to deploy and support the new range of NLT digital products in the mining and tunnelling industries. As a result of this, all personnel were handpicked by the MD for their experience in this field as well as a particular focus on mining. MD Tim Haight himself has over 30 years’ experience in IT, Automation and Electrical Engineering. NLT Australia staff has been heavily involved, and in fact took a lead role in developing the world-first IEC Exia Approved 802.11 wireless Access point. As a result of this, an intimate knowledge of the products and their deployment has been gained. These products are currently deployed and operational in a number of mines throughout Australia and indeed the world. NLT Strategic Direction: NLT and indeed NLT Australia have been focused on becoming the leading supplier of 802.11 wireless solutions to the mining industry. NLT Australia has doubled in size and turnover year over year for the last 5 years. We have had a focus on establishing ourselves in strategic locations throughout the mining regions.

SMARTER. FASTER. FIRST.

Lighting the way through innovative technology solutions.

NLT Digital WiFi Communications and Tracking

NLT Australia Pty Ltd 1/22 Cessna Drive, Caboolture Qld Phone 07 5495 2944 | Email info@nltinc.com.au 327504A_NLT Aust | 2065.indd 1

110 • MESCA MEMBERS DIRECTORY VOL 8

13/11/13 11:22 AM

nkt cables is a global manufacturer and supplier of innovative energy cable solutions • MV XLPE underground cables; 3.3kV-33kV • HV XLPE underground cables; 66kV-500kV • Joints and terminations for MV and HV cables • Railway-contact and catenary wires • VALCAP grid monitoring and rating for

submarine cables, high-voltage cables

and overhead lines • Jointing service • Turnkey Projects • Submarine cable

nkt cables Australia Pty Ltd Unit 12/191 Hedley Avenue Hendra QLD 4011 Tel: 1300 458 112 www.nktcables.com sales@nktcables.com.au

MESCA SUPPLIERS Industry Buying Guide

It has been our experience that our strength has been service and support, and in acting more as a partner with our clients. This has shown great results in understanding the needs and providing solutions to problems before they impact on both of our businesses. NLT Australia recently held our second Industry Focus group in 4 years. For this, we invited and had attend for two days Industry leaders from the major mining groups with Group Engineering and Projects managers from Vale, Peabody, Anglo and others, as well as Mines rescue and the mines inspectorate. During these meetings, we discussed and set our product road map for the next 18 months based on industry needs determined in these meetings.

Products: NLT is a global leader in mining communications with a particular niche in Underground Coal mines. Wi-Fi communications in remote and difficult locations has proven to be a particular expertise. NLT has in fact been challenged by industry to provide unique solutions leading us to develop a series of 801.11 Wireless devices of our own, including a number of world first products. Specifically, our product offering includes: • 802.11 a, b, g and n WAP for surface Applications • 802.11 a, b, g WAP- Exia Approved • 802.11 a, b, g Messenger CAP lamp – Exia Approved • VoIP (SIP) Telephones Exia (Approval pending Oct 09) • 802.11 a, b, g portable WAP - Exia (Approval pending Oct 09) • 802.11 a, b, g rapidly deployable Rail Early Warning systems • Aeroscout Wireless tags • RFID tracking readers • RFID tracking tags • 802.11 a, b, g Portable environmental Nodes ( gas, airflow, dust, tracking) • Miners cap lamps • Accutron Airflow Monitors • Ocenco Self Contained Self Rescuer • Proximity Detection • Software solutions.

New Products: Rail Early Warning System.

Other Countries: Canada; Chile.

Specialisation: Intrinsically safe wireless communications and networks. ISO9001 and AS3800 Certified.

Website:

About: NORD Drivesystems Au is a 100% owned subsidiary of Getriebebau NORD GmbH and Co. KG, Bargteheide, Germany. Getriebebau NORD is the secondlargest manufacturer of Helical geared motors internationally. NORD are the pioneers of the modern Helical geared motor design and specification, which in 1981, was released as the groundbreaking “Unicase” series. This Geared motor specification revolutionised Helical geared motor design, and remains little unchanged after 30 years. The Unicase design has also been widely imitated by other geared motor manufacturers. Getriebebau NORD has 100% owned assembly and sales facilities in 35 countries outside Germany. There are another 60 countries where NORD products are assembled or distributed by service agents and distributor networks. NORD also designs and manufactures cabinet Mt and decentralised frequency inverters, and all NORD electric motors. All of NORD’s gearbox and frequency inverter products are exclusively manufactured in Germany only. NORD Drivesystems Au commenced trading activities in Australia early in 2009, with establishment of a brand-new facility at Derrimut, situated in Melbourne’s western freight corridor. The facility incorporates the most modern tooling and presses for assembly of Helical geared motors seen anywhere in Australia. All of the NORD assembly procedures, including the Quality Assurance program, mirror those completed in Germany, and these procedures are also mirrored throughout all of NORD’s international assembly facilities. The Derrimut premises house a large range of NORD products in bare component form to support the assembly lines. The factory and sales computer systems utilised in Australia are the identical systems used in Germany and internationally. A NORD service operation is also accommodated in the factory for all after-sales service, and for any possible warranty inspection and repairs.

Specialisation: NORD industrial gear units have been developed according to the triedand-tested unicase housing principle. The unicase is a one-piece housing, into which all the bearings are integrated. The finishing of this unicase is carried out with a unique jig, on state-of-the-art CNC machines. The unicase concept features highest levels of precision, rigidity and strength. There are no dividing seams between the drive and the gear unit housing, which are subjected to transverse forces or torque. The unicase principle allows the shaft axes to be staggered, resulting in a more compact design, which allows the use of larger roller bearings to guarantee a long operating life. Advantages of unicase housings: Optimum sealing – Quiet running – High-torque capacity – Increased lubricant life Maximised operating life of bearings and gears – High reliability – Long operating life

www.nltinc.com

Symmetrical design – B14 face as standard on output side – 6 installation configurations

Offices: WA Address:

Nord Drivesystems Au

Mirror-image installation possible – Same housing size, installation dimensions for all ratios (2 and 3 stage).

Phone:

14 Trevaskis Street, 0421 467 409 KALGOORLIE, WA 6430

Website:

www.nord.com

Norcoast Refrigeration Company Pty Ltd Offices: QLD Address:

Phone:

PO Box 402, MOFFAT BEACH, QLD 4551

07 5491 1849 07 5491 7627

Fax:

Email: norcoast@norcoast.com.au

112 • MESCA MEMBERS DIRECTORY VOL 8

Offices: VIC Address:

Phone:

Fax:

18 Stoney Way, DERRIMUT, VIC 3030

1300 00 NORD

03 9394 1525

MESCA SUPPLIERS Industry Buying Guide

Norman Disney & Young

•

Condition / Due Diligence Surveys and Reports

•

Construction Administration and Management

About:

•

Occupancy Surveys and Post Construction Audits

•

LEED, BREEAM, Green Star and NABERS Energy Assessments and Submissions.

Norman Disney & Young was established in 1959, and has since expanded into a large and successful international firm of consulting engineers, with over 600 staff in offices throughout Australia, New Zealand, the UK and the Middle East.

New Products:

Since 1959, Norman Disney & Young has developed a reputation for providing Consulting Engineering services with innovation, ability and effectiveness.

•

Modal / FEA / SEA Vibroacoustics

•

Full 3-D CAD / Revit documentation control services

•

Power analysis

Our commitment to the success of each of our projects results in providing solutions that are competitive in terms of capital cost, economical and manageable, conscious of environmental needs, energy-efficient, and have the flexibility to adapt to changing requirements throughout the life of the installation.

•

Stray Current

•

Wheel to Track Interface modelling and control.

Norman Disney & Young is committed to quality assurance, and is certified by SAI Global Assurance Services to ISO 9001:2000. The quality system encompasses all aspects of the project from design through construction and to the end of the defects liability period. The quality system has been applied on all projects since September 1993. NDY operates under this fully accredited system. Adherence by the group to Risk Management processes and fully accredited in-house QA procedures ensure that all design solutions are subjected to rigorous scrutiny. With the involvement of Company Directors and Senior Management in all aspects of project development, their established skills and experience ensures that engineering quality is maintained, time programs are met, budgets achieved and the project successfully completed.

Equipment: Environmental survey equipment Noise and vibration analysers Noise and vibration loggers.

Other Countries: UK, New Zealand, Malaysia, UAE.

Specialisation: •

NDY Infrastructure – Road, rail, power and services tunnels

•

NDY Environment – Sustainability & the environment

•

NDY Sound – Acoustics, noise and vibration

Where possible, our role looks to contribute to the broader knowledgebase on sustainability. This can either be in the formal technical papers and presentations made to the construction industry, or innovation made available and delivered to the broader community. This is an area that we are passionate about and actively contribute to.

•

NDY Power Group – High voltage asset design and management

•

NDY Matrix Risk – Hazard identification, risk assessment and management

•

NDY Fire – Fire services and engineering consultancy

•

Plant monitoring and control systems

Activity:

•

Internal air quality, smoke control and ventilation

As a multidisciplinary engineering services firm we are able to offer your organisation a portfolio of established specialised services beyond those of a traditional engineering consultancy. This means that our core experience and expertise in mining and energy sectors is complemented by specialist services in environmental, occupational and project management aspects.

•

Mechanical, electrical, hydraulic services

•

Fire detection, specialist fire engineering

•

Electrical services and specialist lighting

•

Risk assessment and management

NDY has provided consulting engineering services on major building and infrastructure projects throughout Australia and overseas for over 50 years. These projects have included industrial and commercial developments, new and refurbished mining and port complexes, and a large variety of specialist facilities. Since the 1990s, NDY has focused on increasing its capacity to comprehensively serve mining infrastructure and asset projects.

•

Communication, security and variable message signage (VMS)

•

Information technology systems (ITS)

•

NDYLIGHT – Creative lighting design

•

MPlus – Services management and modernisation

•

Building automation

Today, NDY offers a full suite of engineering services to MESCA members and organisations involved in mining, energy and exploration operations.

•

NDY Interiors – Tenancy accommodation fit-out services

NDY is able to quickly and effectively mobilise a team commensurate with your project needs. The consulting services we provide ranges from purely technical design work to strategic sustainable consulting throughout the built asset’s entire life cycle.

Products: •

Environmental impact statements and sustainability assessments

•

Inspection audits and authority submissions

•

Occupational comfort / health / compliance studies

•

High-voltage (HV) / Low-voltage (LV) power transmission design and analysis

•

Machine condition monitoring

•

Environmental emissions compliance reports

•

Building Information Modelling (BIM) and asset documentation / management tools

•

Feasibility Studies

•

Concept Design and Space Planning

•

Full Design / Design and Build Documentation

Website:

www.ndy.com Offices: QLD Address:

Phone:

Level 14, 120 Edward Street, BRISBANE, QLD 4000

07 3120 6800 07 3210 3900

Fax:

MESCA MEMBERS DIRECTORY VOL 8 • 113

MESCA SUPPLIERS Industry Buying Guide

Northline Pty Ltd

SentineX Fixed Dust Monitor (TEOM or BAM)

About:

Odour and gaseous compound monitors

We have branches located in all mainland states of Australia and a dedicated team of people in all locations committed to delivering a total transport solution.

SentineX Automatic Weather Station SentineX Rainfall Station

Activity:

SentineX Wind Monitoring Station

NORTHLINE is one of Australia’s leading transport and logistics providers who operate in all supply chain sectors. We pride ourselves on delivering solutions to our clients that are innovative and customer-focused.

SentineX Mini – customisable logging system Criteria Risk Management Software

Products:

Wireless mesh networking

At Northline, our focus is on our core service offerings, which encompasses Project Management, Freight Management Services (domestic markets), Contract Logistics (warehousing) and International Freight Forwarding.

New Products:

SentineX Portable Dust Monitor (laser photometer)

Website:

SentineX Temperature Inversion Monitor

Data management and communications Digital Radio systems.

Sentelligence-data analysis tool.

Specialisation:

www.northline.com.au Offices: SA Address:

Phone:

Level 1, 62 The Parade, NORWOOD, SA 5067

1300 722 534 08 8273 7310

Fax:

Remote monitoring; Environmental monitoring; Data management; Remote communication systems; Continuous monitoring systems; Systems integration; Process Control; Database development; Web interface development.

Website:

www.novecom.com.au Offices: Head Office – NSW

Novecom Pty Ltd About: Novecom Pty Ltd is an established software development and system integration provider to the mining and resources sector. Novecom is based in Newcastle and is a member of The Advitech Group, an engineering and environmental products and services organisation with a long history of proven performance and strong customer service focus. Novecom’s success is underpinned by the confidence we have in our solutions. We stand by our products, and our people are committed to supporting our customers to achieve excellent outcomes. Our vision is to provide the link between our clients and technology. We use the latest technology to develop a range of leading-edge products designed to help you take control of your business.

Activity: Novecom Pty Ltd is an established software development, system integration and data communications provider to the mining and resources sector. Novecom designs and develops software-based business solutions, which integrate hardware and software systems into a central platform to optimise business processes. We specialise in solutions for the mining, industrial, defence and environmental industries. Novecom has been providing leading environmental monitoring systems to the mining industry since 2004, with over 150 operating systems installed across NSW and QLD. Key application areas include environmental noise, dust, meteorology, water quality and video surveillance. Our skilled team also develops customised software systems for any business requirement. OUR SOLUTIONS

Address:

Phone:

Fax:

7 Riverside Drive, MAYFIELD WEST, NSW 2304

02 49157460

02 4967 3772

NRG Industrial Pty Ltd Offices: Head Office – QLD Address:

Phone:

12 Cassam Street, YEPPOON, QLD 4703

07 4939 2000 07 4939 2044

Fax:

One Key Resources Pty Ltd About: One Key Resources is a specialist provider of workforce development, recruitment, training and production improvement solutions to the mining, resources and civil infrastructure industries. We work closely with our clients to achieve their desired production outcomes while solving their short- and long-term staffing requirements through attracting, screening, selecting and training highly skilled staff.

Activity: Workforce Development and Training.

•

Environmental monitoring systems

•

Process control systems

Products:

•

Database development

Workforce Development – Mining, Gas and Civil

•

Web interface development.

Machine Operator Proficiency Training

Products: SentineX Omnidirectional Noise Monitor – fixed, mobile or portable Quattrosound® Directional Noise Monitor SentineX Blast and Vibration Monitor

114 • MESCA MEMBERS DIRECTORY VOL 8

Animated Online Training Videos “One People” Indigenous Employment and Training Production Improvement in Open-Cut Mining Consulting.

MESCA SUPPLIERS Industry Buying Guide

Onetest Pty Ltd

Other Products: Animated Training Videos hosted online. Standardising operational techniques for machinery used in open-cut mining and civil infrastructure.

Offices: QLD

Other Countries: Papua New Guinea, Laos.

Specialisation:

Address:

Phone:

Unit 1, 21 Windorah Street, BRISBANE QLD 4001

1300 137 937 1300 137 938

Fax:

Workforce Development, Training and Productivity Improvement.

Website:

www.onekeyresources.com.au

Onsite Rental Group Offices: Head Office – QLD

Offices: Head Office – QLD Address:

Phone:

Fax:

Level 1, 324 Wickham Street, FORTITUDE VALLEY, QLD 4006

1300 008 854 07 3233 2110

OneSteel About: OneSteel’s distinction exists in a value-adding focus, strength in resources, both people and product, and extensive logistics network. Each of these aspects has delivered OneSteel’s proven success in contract supply and management. With more than 11,000 employees in over 200 locations across Australia and 13 offshore facilities, OneSteel markets more than 40,000 products to over 30,000 customers. Our revenues are in excess of $6 billion, our total consolidated assets are in excess of $3.5 billion and our market capitalisation is over $6 billion. OneSteel produces in excess of 1.6 million tonnes of Steel per annum.

OneSteel’s major manufacturing facilities are located in Whyalla, South Australia, Melbourne, Victoria, Western Sydney and Newcastle, New South Wales, and Brisbane, Queensland. Smaller manufacturing and distribution facilities are located throughout regional Australia. Additionally, OneSteel has more than 40 operating facilities in New Zealand, Asia and the Pacific that encompass major manufacturing sites and recycling locations. OneSteel also operates eight facilities in the United States consisting of Grinding Media, LiteSteelTM Technologies, Recycling and a ferrous shredder in Tampa, Florida.

Phone:

651 Johnson Road, FORREST LAKE, QLD 4078

07 3722 6666

OnTalent Pty Ltd About: The OnTalent teams are organised by specialisation and focused by job family. This ensures the Account team and key personnel assigned to execute work have both the experience to fully understand the roles, and sound candidate networks to attract quality candidates in a timely manner. Our approach utilises competency-based recruitment aligned with a deep understanding of the position description. This, when combined with competency-based interviews and behavioural-based reference checks, ensures fit to culture, values and role, as well as determining the candidate expectations of the role. The OnTalent teams are: •

Executive and Commercial: Senior Executive and Management, Commercial, Finance, Risk and Procurement, Human Resources, Marketing and Business Development.

•

Engineering, Technical and Operations: Engineers of all disciplines, Safety and Environment specialist roles, Technicians, Supervisors, Skilled Trades.

Activity: OneSteel is a fully integrated, global manufacturer and distributor of steel and finished steel products, self-sufficient in both iron ore and scrap metal, with revenues in excess of $6 billion Australian dollars.

Address:

These areas fit our approach to the market and represent roles that our consulting team have placed most frequently and where we have the strongest networks and candidate connections.

Activity: OnTalent is a specialist Recruitment consultancy, identifying talent throughout Australia, and in turn supporting career growth for candidates within our specialist markets of Commercial and Executive and Engineering, Technical, Operations and IT.

In total, OneSteel services more than 30,000 customers, offers more than 40,000 products globally and employs over 10,500 people.

Products:

OneSteel manufactures and distributes structural, rail, rod, merchant bar, cold finished bar, chrome plated bar, reinforcing, wire, tube, pipes, fittings, valves and actuation, rail wheels and axles, lite steel beam, grinding media and recycled metals. The majority of OneSteel’s products are used in the construction, manufacturing, housing, mining and agricultural industries.

Permanent Recruitment: Retained and Contingent

Website:

The OnTalent teams are organised by specialisation and focused by job family. This ensures the Account team and key personnel assigned to execute work have both the experience to fully understand the roles, and sound candidate networks to attract quality candidates in a timely manner. Our approach utilises competency-based recruitment aligned with a deep understanding of the position description. This, when combined with competency-based interviews and behavioural-based reference checks, ensures fit to culture, values and role, as well as determining the candidate expectations of the role.

www.onesteel.com Offices: NSW Address: 107 Clinton Street, ORANGE, NSW 2800

Contractor Recruitment Market Mapping.

Specialisation:

MESCA MEMBERS DIRECTORY VOL 8 • 115

MESCA SUPPLIERS Industry Buying Guide

The OnTalent teams are: •

•

Executive and Commercial: Senior Executive and Management, Commercial, Finance, Risk and Procurement, Human Resources, Marketing and Business Development. Engineering, Technical and Operations: Engineers of all disciplines, Safety and Environment specialist roles, Technicians, Supervisors, Skilled Trades.

These areas fit our approach to the market and represent roles that our consulting team have placed most frequently and where we have the strongest networks and candidate connections.

Website:

www.ontalent.com.au Offices: QLD Address:

Phone:

Fax:

Level 13, 145 Eagle Street, BRISBANE, QLD 4000

07 3305 5800 0403 262 333

Orontide Group Ltd About: Orontide aims to optimise life cycle costs by extending plant and equipment life, and improving operating efficiencies and reliability.

equipment overhaul, machining, fitting and overhauls; machining CNC; coded welders; project management; load testing and inspection.

Products: PRESERVATION •

Protective coatings solutions, application and maintenance

•

Painting, including specialised

•

Passive fire protection, application and maintenance

•

Non-slip coatings and maintenance

•

Application of high-performance and specialised coatings

•

Abrasive blasting (mineral, plant and wet)

•

Grouting and concrete remediation

•

Pipeline field joint specialised coating systems

•

Thermally applied Aluminium

•

Vessel and tank cleaning and refurbishments.

REMOVAL •

UHP/HP Water Jetting

•

Full Vacuum Recovery

•

LP/High-volume flushing

•

NORM Removal and Handling

•

High-pressure water cold cutting

•

High-pressure cleaning and waste extraction

•

Hydro demolition (concrete).

MAINTENANCE and INSTALLATION •

Mechanical equipment repair and refurbishment

•

Maintenance solutions

•

Site inspections

•

Site installation and commissioning

•

Anti-corrosion systems – Shutdown and campaign maintenance

•

Load testing.

Orontide’s Engineering Services Division offers comprehensive engineering design, mechanical maintenance, manufacturing and fabrication services. Specialist engineering services include design and reverse engineering; machining; on-site – off-site fabrication and install; mechanical rotable equipment overhaul, machining, fitting and overhauls; machining CNC; coded welders; project management; load testing and inspection.

•

Fabrication

•

Piping, supports, pressure vessels, skids

•

Coded welders to all classification societies

•

Machining

•

CNC 5-axis and manual

With innovation, reliability, safety and efficiency our top priorities, these divisions work collaboratively across the organisation to deliver a diverse range of quality solutions in the following areas:

•

CNC plate processing

•

Inspection and testing

•

ACA/NACE Inspections

•

NATA loading testing and inspection.

•

Engineering and Design Solutions

•

Machining and Fitting

•

Fabrication

•

Asset Integrity Management

•

Preservation and Surface Treatment

•

Commissioning and Installation.

MANUFACTURING

ENGINEERING •

Workscope Planning and Scheduling

•

Project management

•

Design: Solidworks/CAD

•

CFD/3-D analysis

Activity:

•

Failure Analysis (FEA)

Orontide aims to optimise life cycle costs by extending plant and equipment life, and improving operating efficiencies and reliability.

•

Drafting – Site inspections and surveys.

Orontide’s Industrial Services Division provides a specialised and comprehensive surface treatment, cleaning and surface preservation service. Specialised services include: protective coatings solutions, including application, maintenance and removal; abrasive blasting; application of high-performance coatings including Thermal Spray Aluminium and UHB Epoxy; cold cutting and equipment cleaning using the latest technology in Ultra High Pressure Water (UHPW) removal and recovery equipment; and decontamination and removal of radioactive materials. Orontide’s Engineering Services Division offers comprehensive engineering design, mechanical maintenance, manufacturing and fabrication services. Specialist engineering services include design and reverse engineering; machining; on-site – off-site fabrication and install; mechanical rotable

116 • MESCA MEMBERS DIRECTORY VOL 8

Specialisation: Engineering; Fabrication; Manufacturing; Maintenance and Installation; Preservation; Specialised Coatings/Painting Application and Removal services.

Website:

www.orontide.com.au

MESCA SUPPLIERS Industry Buying Guide

Offices: Head Office – WA Address:

Phone:

Fax:

54 Sparks Road, HENDERSON, WA 6166

08 9236 2555 08 9410 2056

Ostwald Bros Civil Pty Ltd About: Ostwald Bros. is a diversified family-owned civil construction company operating Australia-wide with offices located throughout Queensland.

•

Management, Administration and Training

•

Feasibility, Design and Engineering

•

Project and Contract Management

•

Construction and Installation

•

Inspection, Testing and Commissioning

•

Integration, Asset Support and Maintenance

•

4.1.

Project Services PAN PROCESS has the capacity to selectively manage electro-technology and Mechanical EPC, EPCM and PCM projects in the Private, Public and Private-Public Partnership sectors, combining the knowledge, skills and experience of engineering, construction and contracting.

The company provides high-quality project management across a range of capabilities covering civil construction, concrete construction along with concrete and quarry supplies. It also owns and operates an extensive transport fleet, which carries out major product haulage as well as ensuring prompt support for the company’s extensive plant and equipment.

PAN PROCESS maintains the capability and experience to successfully deliver on major electrical, instrumentation, automation, communications and mechanical projects.

Ostwald Bros. boasts a history of successful project completion within a range of business sectors. A high level of repeat business sourced from major corporate clients reflects the company’s strong capacity to deliver.

www.panpro.com.au

Website:

www.ostwaldbros.com.au Offices: QLD Address:

Phone:

Fax:

PO Box 3101, 07 3725 6333 07 3379 3400 SOUTH BRISBANE, QLD 4101

Website: Offices: QLD Address:

Phone:

569 Rochedale Road, ROCHEDALE, QLD 4123

1300 338 525 1300 338 035 0459 238 709

Fax:

Mobile:

Parsons Brinckerhoff About:

Pan Process Pty Ltd About: PAN PROCESS provides turnkey electrical services for the resources, infrastructure and heavy industrial sectors. Our capability covers all aspects of substation construction, HV and LV power reticulation, general lighting and power, instrumentation and control systems, installation, commissioning, and can extend to design and supply. We have a strong commitment to safety, professional quality management systems. With experience operating in remote locations and across wide geographic areas, we understand the logistical and practical challenges involved with major projects.

Activity: PAN PROCESS (Mechanical Electrical Contractors) provides clients with modern solutions based on technical services incorporating discrete and fully integrated electrical, automation, control, instrumentation and communication products and services to all major types of industrial enterprises.

Products: Electrical Contacting – E&I Contacting, that also handles Over Head HV, Switching Yards, Transformers, Control Rooms, HV and LV Reticulation.

New Products: CABLE SOURCING and ENGINEERING “WE SOLVE POWER CABLE PROBLEMS”.

Other Countries: PNG.

PB is one of the world’s leading planning, environmental, engineering, and program and project management firms. We employ well over 10,000 people worldwide to work with our clients to reach their desired project and program outcomes.

Website:

www.pb.com.au Offices: QLD Address:

Phone:

GPO Box 2907, BRISBANE, QLD 4001

07 3854 6200 07 3854 6500

Fax:

Pentair Valves & Controls About: Pentair Valves and Controls (formerly Tyco Flow Control) is the region’s largest integrated flow control company with eighteen manufacturing plants certified to ISO 9001 and twenty-five strategically located sales, distribution and service centres and over 1850 employees. Pentair Valves and Controls is a major provider of products and services to most of the region’s mining and mineral processing businesses. The company works in close partnerships with the majority of the region’s major companies to create ongoing value to the customer’s process. The breadth and scope of our resources enables us to offer our customers a complete choice of solutions to all their flow control requirements – from individual products to our Total Solution Package – everything it takes to make flow control simpler, easier and more cost effective.

Specialisation: PAN PROCESS has skilled people with specific experience and expertise in all major areas and activities associated with electrical, data, instrumentation and automation, and we are structured to provide a total solution, including: MESCA MEMBERS DIRECTORY VOL 8 • 117

MESCA SUPPLIERS Industry Buying Guide

Products:

Equipment:

Anderson Greenwood

Terminal Blocks

Biffi

Surge Diverters

Clarkson

Plug and Play cabling systems

Crosby

Relays

FCT

Field and Enclosure I/O.

Flexonics

Other Countries:

Hindle

Phoenix Contact is the world’s largest Connection and Interface product producer.

Keystone Klein

Manufactured in 10 countries and represented in over 100 countries, Phoenix Contact can support its customer base reliably.

KTM Lunkenheimer

Specialisation:

Morin

Specialised terminal rail assembly from Phoenix Contact gives its customers the ability to design specific rail configurations delivered as a standard product.

Promet Ramondi Raychem

Website:

Richards

www.phoenixcontact.com.au

Sempell Tamar

Offices: QLD

Terry Tyco Valves and Controls Vanessa Waval Winn

Address:

Phone:

2/20 Graystone Street, TINGALPA, QLD 4173

07 3890 4255 07 3890 3834

Fax:

Yarway.

Other Countries: Argentina; Israel; Italy; Australia; Japan; Austria; Korea; Latin America; Belgium; Luxembourg; Malaysia; Brazil; Mexico; Canada; Netherlands; Chile; New Zealand; China; Norway; Colombia; Pakistan; Costa Rica.

Website:

www.pentair.com/valves Offices: Head Office – NSW Address:

Phone:

Locked Bag 2, NOWRA, NSW 2541

02 4448 0300 02 4423 3232

Fax:

Phoenix Contact Pty Ltd Activity: Phoenix Contact manufacture an extensive range of: Termination Connectivity Cabling Systems Surge Protection Interface and Automation Products To a wide variety of Industrial market sectors. Some of these market sectors include the Mining, Factory Automation, Water Treatment, Energy and Oil and Gas markets.

New Products: PIT is Push In Termination. This new technology is the latest development from Phoenix Contact to give users the speed of termination they require without any compromise to connection reliability.

Piling Contractors Pty Ltd About: Piling Contractors are proud of our reputation as one of Australia’s premier specialist engineering companies. We have an impressive track record for providing outstanding results on all types of heavy engineering, resources, mining and infrastructure projects, as well as utilities, commercial building and marine projects throughout Australia. We work for a wide range of clients including EPCM Contractors, Main Contractors and Developers. We specialise in offering design and construction solutions, as well as value engineering, Alliancing, partnering and construct only services. Our key values include engineering excellence, a commitment to continual innovation and a focus on safety. Our quality system is certified to ISO9001:2008 and our safety system to AS4801. Piling Contractors is the largest Australian piling company undertaking projects nationwide with operational bases in Adelaide, Brisbane, Melbourne, Perth and Sydney.

Activity: For 30 years now, we have been Building the Foundations of Australia, providing piling, retaining wall and ground improvement solutions.

Products: Our foundation and ground improvement range is comprehensive, including driven steel tubes, sheets and prestressed concrete piles, temporary and permanent cased bored piles with or without fluid support, segmentally cased bored and CFA piles, displacement columns, diaphragm walls, slurry walls, secant, contiguous or soldier pile walls, falsework, marine piling and mine void filling.

New Products: Ductile Iron Pipe Piles.

Equipment: DRILLING EQUIPMENT Large Drilling Rigs.

118 • MESCA MEMBERS DIRECTORY VOL 8

MESCA SUPPLIERS Industry Buying Guide

We have 10 No. high-torque Bauer drilling rigs, which have the following specifications / capabilities: •

22 T.m to 40 T.m torque (including recent addition BG40 drill rig)

•

500mm – 3000mm dia piles / shafts.

Polyline Industries Pty Ltd Offices: QLD

Specialisation: Large diameter bored shafts, ground improvements, marine piling, design and construction.

Website:

Address:

Phone:

55 Cutler Road, SUCCESS, WA 6964

08 9414 1535 08 9414 1452

Fax:

www.pilingcontractors.com.au

Power Step (Aust) Pty Ltd

Offices: QLD

About:

Address:

Phone:

5 Jacque Court, LAWNTON, QLD 4501

07 3285 5900

Power Step head office and main facility is located at Archerfield, Queensland, with representation in most Australian states.

Activity: Design and engineer Safety Access System for Large Mobile Equipment.

Email: mail@pilingcontractors.com.au

Products: Power Step Access Systems Power Step Sun Blinds

PIMS Group

Eva-A-Lights [LED lights and Beacons].

Other Countries:

Offices: QLD

Indonesia; Papua New Guinea; South Africa; Chile; Peru; Brazil.

Address:

Phone:

Fax:

43 Evans Avenue, MOUNT PLEASANT QLD 4740

07 4969 3900 07 4969 3999

Specialisation: The design of access systems for all types of equipment and industries, including Railways, Marine, Transport and Mining.

Visit our new website!

At Piling Contractors we offer design and construct solutions, as well as value engineering, alliancing, partnering and construct only services. Our extensive experience includes providing foundations, retaining structures and shafts for LNG plants, Mine, Rail and Port facilities, jetties and marine piling from falsework.

Building the Foundations of Australia

Bored Piling Driven Piling CFA Piling Slurry Walls

Shaft Drilling Retaining Walls Diaphragm Walls Mine Filling

Sheet Piling Falsework Rigid Inclusions

Contact: foundations@pilingcontractors.com.au pilingcontractors.com.au

MESCA MEMBERS DIRECTORY VOL 8 • 119

MESCA SUPPLIERS Industry Buying Guide

Website:

www.powerstep.com.au Phone:

BHP Billiton: Worsley Expansion

•

Woodside: North Rankin Redevelopment Project.

Specialisation:

Offices: QLD Address:

•

Fax:

Unit 4, 8 07 3277 1775 07 3277 3994 Willingdon Street, ARCHERFIELD, QLD 4108

Commissioning and Completions encompassing Consulting Testing Validation Verification Hazard Assessment

PPG Industries Australia Pty Ltd Offices: VIC Address:

Phone:

Fax:

14 McNaughton 03 9263 4931 03 9263 4658 Road, CLAYTON SOUTH, VIC 3169

Precisionscreen Pty Ltd

Start-Up Maintenance Operations, sale, rental and management of specialist technical equipment.

Website:

www.presentgroup.com.au Offices: QLD Address:

Phone:

Fax:

4/70 Fison Avenue West, EAGLE FARM, QLD 4009

07 3268 1378

03 268 1374

Offices: WA Address: 101 Brook Road, KENWICK, WA 6107

Pressurelube International Pty Ltd About:

Present Group About: In line with our stated purpose of becoming the ONE commissioning completions group, Powertech has been transformed into a new differentiated entity known as the Present Group. The Present Group encompasses four complementary areas of expertise – Consulting, Resourcing, Services and Facilities. OCTAVE CONSULTING is focused on providing complete solutions to the most complex and costly asset problems using its tools and expertise to ensure that projects deliver assets to “name plate” performance, on time and budget. Octave also provides effective governance of projects, eliminating costly tail end overruns and optimising the performance of assets through life. SEAMLESS RESOURCING provides large or small multidisciplined teams tailored to client needs, whether it be testing or commissioning, validation, verification, audit or hazard assessment. With world-class employee retention, Seamless is able to rapidly mobilise highly motivated individuals to deliver the required client outcomes. POWERTECH SERVICES provides world-class technical specialists across all engineering disciplines to ensure the customer gets the desired result in commissioning, testing, start-up, maintenance and operations. Powertech technical specialists are highly trained, experienced, autonomous, reliable and tenacious. PRECISE FACILITIES – formerly Powertech Rentals – has unrivalled experience in the sale, rental and management of specialist technical equipment. With a national network of branches, it can provide sales and service, calibration and specialist support to meet all client needs.

Activity: Sampling of Current Projects:

Pressure Lube International (PLI) is the leading Online VALVE LUBRICATION and SEALING SERVICE company for the oil and gas industry that offers total valve care. PLI has more than 20 years’ experience working with some of the world’s leading oil and gas companies, including Apache, Alinta, Maersk Oil, OXY, Shell and BP. We specialise in on-site repairs for both large and small operations in Australia, New Zealand, UK and the Middle East.

Activity: PLI manufactures fittings, adaptors, safety tool, pumps and equipment for valve maintenance. PLI has made countless innovations in the valve service market. Our program avoids changing out a damaged valve and avoids unplanned shutdown situations. Any valve which has a lubrication/emergency sealing fitting can be worked on. A passing or seized valve can be kept on line by our method of cleaning risers or lube lines to allow the injection of 100% synthetic lubricants or sealant. Whether on wellheads, production platform or pipeline, the PLI Valve HeathCare Program has proven to increase valve integrity and reduce costs. All PLI work is fully documented, and comprehensive training is available.

Products: PLI develops and manufactures the highest quality fittings, adaptors, safety tools, injection pumps, skids, compressors and equipment for complete valve maintenance. Our complete range of lubricants, sealants, cleaners, flushes, and anti-seize products form an important part of total valve care. Maintenance Products: PLI ANTI SEIZE 2200 PLI STICK PACKING 686

•

Apache: Devil Creek Development Project (DCDP)

PLI GREASE FORM VALVE CLEANER

•

BHP Billiton: Rapid Growth Project 5

PLI SUPER CONDENSATE VALVE SEALANT

•

CITIC Pacific Mining: Sino Iron Project Power Station

PLI LIQUID VALVE FLUSH

120 • MESCA MEMBERS DIRECTORY VOL 8

MESCA SUPPLIERS Industry Buying Guide

PLI SYNTHETIC VALVE LUBRICANT PLI High-performance SYNTHETIC VALVE SEALANT

Offices: WA Address:

PLI High-performance SYNTHETIC SUPER BLUE VALVE SEALANT

Phone:

23 Jackson Street, 08 9379 1200 BASSENDEAN, WA 6054

PLI STICK PACKING 636G. Fittings:

Fax: 08 9279 9929

Easiflow Vented Cap Giant Button Easiflow Lubricant Injection Fitting Easiflow Lube – Fitting Long Stem fitting Pressure Relief Valve Packing Injection Fitting Internal Check Fitting Body Bleed Valve Packing Glands Cavity Plug Easy Flow Lube Fitting 60 Degrees Junk Rings. PLI products, equipment and personnel are available on 24 hour call out for offshore / onshore service.

New Products: In 2003, Pressure Lube recognised the opportunity for valve repair, testing, modifications and design, and offers a superior range of products to clients throughout the world with it’s parent manufacturing company.

Prime Rentals About: Prime Rentals was established in 1995 to service the local industry and mining companies of Central Qld and the Surat and Bowen Basin. Prime Rentals has branches in Gladstone, Mackay, Roma and Emerald, and has one of the largest rental fleets of Access Equipment and industrial equipment in the region.

Activity: Prime Rentals are Specialists in the hire of Mobile Elevating Work Platforms and Telescopic Forklifts and industrial equipment. Hire and sales of access equipment, forklifts and industrial tools and equipment including Boom Lifts, Scissor Lifts, Forklifts, Welders, Compressors, Generators, Material Handlers, Lighting Towers, Shut down containers and Tooling, Rollers and Earth moving equipment.

Products:

PLI is part of the Pressform Group based in Bassendean, Western Australia, including the following companies:

•

Scissor Lifts 15’ to 50’

•

Boom Lifts 30’ to 135’

Pressform Engineering (PFE) – the metal manufacturing experts with 40 years’ experience in providing specialist metal fabrication services for industrial, mining, oil and gas, commercial, residential and building projects worldwide. Press. Form. Laser. Weld. Punch. Cut. Machine provide a total component solution from the smallest custom part to complex welded structures up to 10 tonnes; our experienced team specialises in providing innovative engineering solutions. PFE also design and manufacture an extensive range of prefabricated parts for industry.

•

Mast Forklifts

•

Telescopic Forklifts

•

Material Handlers

•

Lighting Towers

•

Diesel and Electric Welders

•

Compressors

•

Industrial Tools

•

Duct Lifts, Generators, Rollers, Shut down Containers, Earth moving equipment, Hydraulic and pneumatic equipment including Torque Wrenches and cylinders etc.

Valve Sales Australia (VSA) – the sole distributor for high-quality MIR Valves, Paladon Actuators, CVS Controls, Sabre Valves in Australia. ALLOY – designs and manufactures high-quality metal products including architectural finishes, accessories and screens.

Other Countries:

New Products:

New Zealand, United Kingdom and the Middle East.

•

JLG 135SJP – 135’ Telescopic Boom Lift & Genie 135’ Articulated (knuckle) boom lifts

Specialisation:

•

6000 watt Lighting Towers

Pressure Lube specialises in on-site repairs for both large and small operations. We understand that different clients have different service needs. In all cases, we fully document our procedures from start to finish to assist in tracking and planning future works. We also tag all the valves, showing which products were injected and when they are due for their next service. We pride ourselves on delivering outstanding service, and to meet our customers’ needs we offer three service options:

•

Lincoln 575 Diesel Welders

•

Atlas Copco 395 cfm Compressors, Road Rollers, Trench Rollers, Generators, Shut down containers. Hydraulic and Pneumatic Torque Wrenches. 12000 watt – 24000 watt lighting towers. Non-sparking tooling.

Equipment:

Short term (repair maintenance and testing)

EWPS (Access Equipment) Boom Lifts and Scissor Lifts

Long term (development of preventative maintenance programmes)

Forklifts

Comprehensive valve refurbishment and repair through our alliance with Valvetech Engineering.

Telescopic Forklifts / Material Handlers

Our range of services include: •

Flushing and sealing of passing valves

•

Setting up of preventative valve maintenance programs

•

Setting up of valve lubrication systems

•

Training

•

Sales of equipment and products

•

Valve repair and testing.

Website:

Generators Compressors Welders Pressure Cleaners Lighting Towers Hydraulic Torque Wrenches Pneumatic Torque Wrenches Hydraulic Cylinders Industrial Tool.

www.pressurelube.com.au MESCA MEMBERS DIRECTORY VOL 8 • 121

MESCA SUPPLIERS Industry Buying Guide

Specialisation: Prime Rentals provides Quality Equipment and exceptional Service. Prime Rentals specialises in supplying a full range of industrial equipment for major projects, long-term rentals and shutdown packages. Barcoded Tool Store packages fully manned for outages and shutdowns available. Prime Rentals also carries the Skyjack TK Series Overbridge Units capable of reaching 37’(ft) below ground level. Ideal for bridge and wharf construction works. Prime caters for fully staffed on-site facilities for major industries and construction sites.

Website:

www.primerentals.com.au Phone:

4 George Mamalis Place, GLADSTONE, QLD 4680

07 4976 8100 07 49727 466

About: Pronto Software is an international provider of fully integrated Enterprise Management Solutions. For 30 years, Pronto Software has enabled over 1,200 customers worldwide to maximise productivity, streamline their supply chain and deliver superior customer service. Our infrastructure is scalable, cost-effective and easy to implement, providing a solid base for a low Total Cost of Ownership. Pronto has been an early adopter of Linux and has always used thin client architectures to minimise network and desktop resources. Pronto Software’s fully integrated solutions are available for key business functions, financials, Supply chain, Retail, Manufacturing, Project costing management, Service management relationship management, e-business, Facility management and Business intelligence.

Offices: QLD Address:

Pronto Software

Fax:

These solutions are designed to ensure that all companies – small, medium and large – are provided with cost-effective tools that translate existing business models and process into an appropriately scaled information system. When you become a Pronto Software customer, you enter into a mutually rewarding relationship, which will support your continued success.

Proleum Pty Ltd

Activity: Pronto Software is a leading international provider of fully integrated ERP solutions which can be tailored to suit your business.

Offices: WA Address:

Phone:

88 Welshpool Road, WELSHPOOL, WA 6106

08 6189 2066 08 9470 9198

Fax:

Products: PRONTO-Xi.

Website:

www.pronto.com.au Offices: Head Office – VIC Address:

Phone:

Fax:

20 Lakeside Drive, 03 9887 7770 03 9887 7779 EAST BURWOOD, VIC 3151

Protech Working Recruitment Offices: QLD

Are you ready to dig into your business?

07 3440 2888 07 3440 2898

Offices: QLD

Pronto has developed a ground-breaking synthesis of business intelligence and enterprise resource planning to help our customers turn data into decisive action. To learn more…

Find your moment: pronto.net

DIRECTORY VOL 8

Phone:

3466 Pacific Highway, SPRINGWOOD, QLD 4127

Protector Alsafe

Raw data will only get you so far. To outperform today you need to alloy your internal decisionmaking with the purest insight you can extract.

327405A_Pronto 2065.indd Pronto MESCA ad| MESCA d06.indd 11 122 • MEMBERS

Address:

31/10/13 PM 13-10-25 2:18 16:24

Address:

Phone:

160 Robinson Road, GEEBUNG, QLD 4034

07 3867 7744

Fax:

MESCA SUPPLIERS Industry Buying Guide

Pybar Mining Services Pty Ltd

Offices: QLD Address:

About:

Phone:

53 Success Street, 07 3275 2544 ACACIA RIDGE, QLD 4110

PYBAR was established in 1995 as an Underground Mining Contractor. Since then, PYBAR has expanded its range of services to meet the needs of the Surface Mining and Civil Construction sectors.

Fax: 07 3275 2524

PYBAR employs over 500 skilled and experienced Managers, Engineers, Supervisors, Operators, Tradespeople and Administration staff at various sites and locations across Australia. A commitment to establishing and maintaining long-term partnerships with our clients has placed PYBAR as a preferred partner for many Australian and International Companies.

Quarry Mining & Construction Equipment Pty Ltd

Activity:

About:

Underground and open-cut mining and Civil services

Quarry Mining designs and manufactures hard-wearing drilling consumables. All our products are manufactured using the highest quality steels, Tungsten Carbide and PCD to ensure the best results are achieved across a range of drilling conditions.

Our underground mining services include: •

Mine development and production

•

Skilled/Experienced labour supply

•

Plant and equipment Hire

•

Road Maintenance

•

Ground support

•

Shotcreting

•

Production drilling.

We specialise in working in consultation with customers to provide technical information and customise drilling solutions to meet the specific challenges of the project.

Activity: Drilling Consumables for Underground Coal Mines.

Products:

Our open-cut mining services include: •

Infrastructure and Mine site establishment

•

Road construction

•

Drill and blast

•

Bulk earthworks

•

Ground support

•

Labour Supply

•

Plant and equipment hire.

Percussive Drilling, Tunnelling, Quarrying – Hard Rock: R25, R32, R38, T38, T45 and T51 left hand percussive extension drilling equipment: Includes the full range of M/F and drifter rods, button and ballistic button drill bits in standard and retrac configurations. Couplings and shank adaptors for all drifter types, bit adaptors and splits sets and dollies to suit.

Our civil services include: •

Bulk earthworks

•

Drill and blast

•

Rock breaking

•

Plant and equipment hire

•

Ground Support.

Mining, Roof Support, Soft Rock: R18, R19, R20, R22, R25 and AW rotary extension drilling equipment including full range of drill rods, wing and reamer bits in all thread and diameter sizes. Bits, adaptors and roof bolt spanners for all applications can be manufactured to suit customer specifications.

Pneumatic Hand Held Rock Drills and Hammers: Quarry Mining provides sales, hire and servicing of a full range of hand held pneumatic tools: •

Rambors, Rib Drills, Whindy Borers

•

Percussive Rock Drills and Airlegs

Website:

•

Stopers

www.pybar.com.au

•

Chipping Hammers

•

Pumps – full range of sizes.

Offices: NSW Address:

Phone:

Fax:

1668-1670 Forest Road, ORANGE, NSW 2800

02 6361 4499 02 6360 2783

New Products: The Angel Bit: The Angel Bit makes the drilling process safer by eliminating the risk of entanglement when drilling around mine mesh while maintaining all the aggressive drilling and flushing efficiencies of the traditional two wing bit. A design modification to the drilling head ensures the drill will roll off or cut through the mesh if it comes into contact with it, removing any risk of injury to the operator.

QMW Industries Pty Ltd

Quarry Mining Extendable Spanner: This new design makes bolting safer by allowing a completely hands-free situation when using a spanner off a drill rig.

Products:

Slim Boy Adaptor: The Slim Boy Adaptor is a lighter weight one piece drive for the direct drive system.

Roll Over Protective Structures (ROPS), Falling Object Protective Structures FOPS.

Website:

www.qmw.com.au

Specialisation: On-site technical advice and customisation of drilling consumables – sitespecific trials, audits and reports.

Website:

www.quarrymining.com

MESCA MEMBERS DIRECTORY VOL 8 • 123

MESCA SUPPLIERS Industry Buying Guide

Offices: NSW Address:

Phone:

Fax:

9, 14 Yangan Drive, BERESFIELD, NSW 2322

02 4966 5028 02 4910 9022

RCR O’Donnell Griffin About: Whether it is a new greenfield project, an upgrade to an existing site, or the ongoing service and maintenance of critical assets, O’Donnell Griffin has the capability to provide a complete electrical and communications engineering solution.

R & D Technology Pty Ltd About: Established in 1993, R&D Technology’s focus has been to satisfy an ever-growing market demand for specialised electrical engineering and mechanical products. Our focus on excellence in customer service and product support has seen us grow to be one of the Hunter’s fastest growing companies. In 2005, R&D Technology acquired Powerhouse Systems in Brisbane, thus enabling R&D technology to add battery chargers and power conditioning to their growing range of products and services.

We have the capacity to integrate specialist skills in mechanical, civil, and other engineering disciplines to offer our customers turnkey design, construct and maintenance packages. The cross utilisation of resources throughout Australia strengthens our delivery capability to mining, oil and gas, rail, power, water, manufacturing, data and telecommunications, agribusiness and other major commercial, industrial and fire services markets. Since 1906, O’Donnell Griffin has played an integral role in the development of Australian infrastructure for Government and private industry. With 25 branches and over 1600 skilled employees throughout Australasia, O’Donnell Griffin has the resources to deliver your mission critical projects.

Activity:

Activity: R&D Technology Pty Ltd Specialist suppliers of electrical engineering products predominantly to mining applications.

Products: Our products and support add value to the following applications:

O’Donnell Griffin is a leading electrical and communications engineering solutions provider. We help our customers design, build and maintain ‘mission critical’ infrastructure in the Rail, Resources, Power, Water and Telecommunications sectors.

Products:

•

Conveyor safety equipment

•

Railway signalling and overhead wiring systems

•

Battery chargers

•

Power generation, transmission, and distribution systems

•

Electronic motor protection

•

Material Handling

High-voltage cabling, switchboards, and process control instrumentation

•

Mining Electronics

•

Communications networks and controls

•

Motor Control

•

Fire detection and suppression systems.

•

Power Conditioning

•

Industrial Automation

•

Power Supplies.

New Products: •

Automatic Train Protection (ATP)

•

SCADA control systems

•

Wireless communications networks

Xtreme range of Steel enclosures – stainless and mild steel even custom designs, IP66, IP67 ratings

•

Thermographic surveys and ultrasonic measurement

•

Partial discharge / Transient earth volt detection

3 phase battery chargers.

•

Transportable substations.

New Products: • •

Website:

Equipment:

www.rdtechnology.com.au

•

Rail signalling, power and communications systems

Offices: QLD

•

HV power stations and substations

•

Transmission tower and line design up to 500kV

•

SCADA control systems

•

UPS and switchgear systems

•

Diesel and gas power generators.

Address:

Phone:

Fax:

WEST END, QLD

07 3846 2644 02 4014 9099

Rapid Alliance

Other Countries: New Zealand.

Specialisation:

Offices: WA Address:

Phone:

Suite 7, 800 Albany Highway, EAST VICTORIA PARK, WA 6101

1300 885 132

•

Rail signalling systems

•

HV power systems and switchgear

•

HV maintenance programs

•

Substation design and construction

•

Power transmission tower and line design up to 500kV

•

Communications networks.

Website:

www.odg.com.au 124 • MESCA MEMBERS DIRECTORY VOL 8

MESCA SUPPLIERS Industry Buying Guide

Offices: QLD Address:

Phone:

29 Breene Place, MORNINGSIDE, QLD 4170

07 3249 4800 07 3249 4810

Fax:

RCR Tomlinson About: RCR Tomlinson Ltd was established as a result of the merger of listed companies RCR Engineering Ltd and Centurion Industries Limited in December 1997. RCR Engineering Ltd was established in Western Australia in 1979 to provide diversified fabrication and machinery services to industry in the south-west region of Western Australia. The company grew steadily, strengthening its resources and skills base by participating in major regional project developments. Centurion Industries Limited was incorporated in Western Australia in 1985 to acquire the business traded under the name Tomlinson, the origins of which date back to 1892. Tomlinson was one of the oldest engineering companies in Australia; boilers manufactured under this name continue to be held in extremely high regard throughout the country. Following its acquisition of the Tomlinson business, Centurion Industries continued to manufacture, sell and service a comprehensive range of high-quality boilers in addition to providing services to its customers in the mining and oil and gas industries. Since its establishment in 1997, RCR Tomlinson Ltd has undergone substantial and sustained growth to emerge as one of Western Australia’s leading multidisciplinary engineering firms, supplying products and services to a diverse clientele, both in Australia and overseas.

Activity: RCR Tomlinson Ltd (“RCR”) is a multidisciplinary engineering company specialising in the design, manufacture and maintenance of heavy equipment and industrial energy systems, together with mechanical and electrical site maintenance, construction and project management. The company’s integrated engineering methodology is supported by specialists capabilities in areas such as heat treatment and laser cutting. RCR is listed on the Australian Stock Exchange (ASX code: RCR). One of our key points of differentiation is our ability to deliver engineering solutions whose elements have been integrated across different areas of technical expertise within RCR. In addition to our credentials for engineering excellence, RCR’s clients benefit from our outstanding performance in safety, quality and the environment, complemented by a highly stable industrial relations record.

Products: Engineering; design; fabrication refurbishment and repair of all types of heavy equipment, particularly for the resources sector. Special expertise in the manufacture of apron feeders, scrubbers and trommels and the maintenance of crushers; gearboxes; draglines and screens with access to detailed data from OEM partners. Design and manufacture of crushing and screening plant solutions for the mining and quarrying industries.

Pressure Retaining Equipment – design and manufacture of: piping systems; boiler pressure parts and heat recovery units; pressure vessels and columns; shell and tube heat exchanges; modular process skids; feed heating plants. On-site construction services and plant management; maintenance monitoring and shutdown management; high-temperature reformer refurbishment; overhaul of specialised valves, safety valves and turbines. Boilers – Custom design and fabrication of boilers, package boilers and third party water heating equipment, ranging in size from 1 to 400 MW; 24 hour maintenance of all boilers, including those supplied by other manufacturers. Electrical Engineering and Maintenance from RCR Positron a recent acquisition of RCR.

Equipment: •

Crushers and specialists mining equipment

•

Apron feeders

•

Trommels

•

Belt feeders and Conveyors

•

Hazemag Crushers

•

Drum Scrubbers

•

Spliceline/Rubber Products

•

Heat Exchangers

•

Boilers

•

Pipe Spooling

•

Hydraulic Engineering and Maintenance

•

Power Station design and manufacture

•

Laser cut steel

•

Site Services

•

Construction and Maintenance

•

Electrical Engineering and Maintenance

•

Power Station Maintenance services

•

Dragline Shutdown Maintenance

•

Oil and Gas maintenance.

Other Countries: RCR have manufacturing facilities in New Zealand as part of RCR Energy systems. RCR export a variety of propriety items to Africa, America, Asia and Europe.

Specialisation: Solution based engineering for all facets of processing and mineral recovery.

Website:

www.rcrtom.com.au Offices: QLD Address:

Phone:

73 Industrial Avenue, WACOL, QLD 4076

07 3879 3344 07 3879 3355

Fax:

Site Maintenance and Construction – contracted site and workshop maintenance; maintenance consulting; greenfield and brownfield site construction; shutdowns; specialist labour hire. Maintenance workshops in Tom Price, Newman, Kalgoorlie, Port Hedland, Karratha and Bunbury. Heat Treatment – stress relieving of vessels and spooling; normalising, annealing and solutionising; case hardening; carburising and controlled atmosphere hardening; induction hardening; refractory dry-out service; NATA accredited materials testing. Laser Cutting – east and west coast operations offering high-precision cutting solutions for: sheet steels up tp 32mm thick; high-grade steels and marine grade aluminium up to 8mm thick and a range of other materials, including tubing.

MESCA MEMBERS DIRECTORY VOL 8 • 125

MESCA SUPPLIERS Industry Buying Guide

Realtime Group

Specialisation:

About: The Realtime Group have been providing Online Instruments and Analysers, and Industrial Radiation Services to the Mining Industry for over 10 years. The Group has offices in Mackay (Head Office) Perth, Melbourne and Brisbane. The Group includes Real Time Instruments, Radiation Safety Services, Western Radiation Services, and Tanktel Telemetry.

Activity: Sales and Service of Online Instrumentation and Analysers, and Industrial Radiation Safety and Consulting, primarily to the Mining Industry. Includes full Commissioning, Calibration and Maintenance services for all products supplied, including service, upgrades and retrofit to many other brands of similar products.

Products: Belt Scales / Weightometers * Online Moisture Analysers * Online PGNAA Elemental Analysers * Online Ash Analysers * Tramp Metal Detectors * Nucleonic Density Gauges * Flow Meters * Industrial Radiation Consulting * Silo and Tank Level Monitoring Telemetry Service * Radioactive Source Sale and Disposal * Radiological Laboratory Analysis of Air, Water and Soil samples.

New Products: AllScan PGNAA Elemental Analyser, with the new DuraG software providing unmatched sensitivity and stability.

We are focused on serving the mining industry to better monitor material quality and quantity in real time, thus improving efficiency and reducing downtime. We do this through providing state-of-the-art Online Analysers, belt scales, tramp metal detectors, and density gauges. We also ensure full compliance with all Radiation Regulations through provision of the most comprehensive suite of Industrial Radiation Services Australia-wide.

Website:

www.realtimegrp.com Offices: Head Office – QLD Address:

Phone:

PO Box 9117, SLADE POINT, QLD 4740

07 4955 5944 07 4965 7099

Fax:

Redispan Conveyors Pty Ltd Activity: Design, Manufacture and Supply Modular Conveyors.

DD-1000 Digital Density Gauge with wireless iPad control.

Products:

Other Countries:

Redispan Enclosed Gantries, Safe-T-veyor® Reditrestle and Redi GTU.

We supply our online Analysers and Density Gauges to global markets, both directly and via a network of Distributors.

New Products: Gen X Accoustic Enclosure, Stacker/Reclaimer Modular Structures.

BULK MATERIALS HANDLING Redispan Redispan – DFMA™ Patents Apply

WHAT

The name Redispan, and the term DFMA™ are synonymous. Design for manufacture and assembly is the ethos that is embodied in Redispan’s DNA. B Redispan modules are designed for constructability, with safety in design being considered R as many items as possibleULfitted for manufacture, construction and the life span of the project, Awith to conveyor modules prior to leaving our workshop. This has a multiplier effect on improving site safety and reducing site costs. Our mass customised products are built to exacting tolerances and designed 3-D modelling, LARISAusing TI meaning installation is a minor task compared to traditional stick-built structures. fewer labour DU Significantly hours are required, along with the elimination of elevated work platforms in most cases. All installation, rigging, bolt fitment and sealant is done either on the ground prior to installation or from within the totally enclosed gantry. None of this can be done without the DFMA™ approach to our products. Redispan is currently applying these DFMA™ principles to the manufacture and assembly of a water treatment plant for a coal seam gas installation in central Queensland. CREATION MechanicalOFand electrical pipe trains and modular process towers have been detailed to be as large as CERTAINTY can be safely transported and handled on site, all piping, mechanical, electrical and instrumentation items are fitted to the modules prior to loading for delivery. Access platforms are also fitted in the workshop – these give the site bolt-up or crews immediate access to joints on site, eliminating the need for expensive scaffolding,Aand allowing MAsite. time-critical work to commence immediately after the modules arrive on E& UFAmade The DFMA™ approach to manufacture and construction has proven to N have CTURsignificant savings in both time and money and has reduced the risk of potential injuries on site.

LING

SYSTEMS

SS EM BL

DU L

WHY

DESI

CUSTOMISED

HOW

Redispan DFMA™ Conveyors 15 Old Punt Road Tomago, NSW 2322 Australia Phone: 1300 131 370 or +61 2 4913 7600 www.redispan.com.au 324543E_Redispan | 2065.indd 1 126 • MESCA MEMBERS DIRECTORY VOL 8

2/12/13 10:51 AM

MESCA SUPPLIERS Industry Buying Guide

REMA Tip Top Industrial Australia Pty Ltd

Other Countries: UAE – Norway – UK – India.

Specialisation:

Offices: NSW

Design and Manufacture.

Website:

www.redispan.com Offices: NSW Address:

Phone:

Fax:

15 Old Punt Road, 02 4964 9750 02 4964 9752 TOMAGO, NSW 2322

Address:

Phone:

9-11 / 350 Edgar Street, CONNELL PARK, NSW 2200

02 9772 4899 02 9771 1260

Fax:

RESCO Services Offices: NSW

Reed Exhibitions Australia About: REEDMININGEVENTS presents a portfolio of high-quality business-tobusiness mining and CSG-LNG industry exhibitions that deliver return on investment for our valued customers. Our exhibitions are strategically timed and located as part of a structured calendar of established events with successful track records, of which AIMEX dates back to the 1970s and QME the 1990s.

Activity: REEDMININGEVENTS is the organiser of mining and CSG-LNG industry trade exhibitions and conferences in key regions across Australia and Indonesia.

Products: Mining and Engineering Western Australia (M&E WA), 6-8 May 2014, Perth, WA www.miningandengineeringwa.com.au Queensland Mining and Engineering Exhibition (QME), 22-24 July 2014, Mackay, QLD www.queenslandminingexpo.com.au Queensland Gas Conference and Exhibition (QGCE), 9-10 September 2014, Brisbane, QLD www.queenslandgasconference.com.au Mining and Engineering New South Wales (M&E NSW), 8-10 October 2014, Newcastle, NSW www.miningandengineeringnsw.com.au Mining and Engineering Indonesia (M&E Indo), 29-31 October 2014, Jakarta, Indonesia www.miningandengineeringindo.com Asia-Pacific’s International Mining Exhibition (AIMEX), 1-4 September 2015, Sydney, NSW www.aimex.com.au

Other Countries: Indonesia.

Address:

Phone:

Level 1, 147 O’Riordan Street, MASCOT, NSW 2020

02 8093 1813

Rexel Electrical Supplies About: Established in 1967, our vision is to remain a world-leading supplier and specialist distributor of electrical products. Rexel operates globally in 37 countries with 2,300 branches, a distribution network of more than 40 banners and a dedicated team of 28,000 employees. Achieved and embodied in our Energy in Motion program, our mission is to support customers around the globe to create value and run their business better by providing a broad range of sustainable and innovative products and services for automation, technical supply and energy management. Via our global vision, we are accelerating electrical advances in products and solutions in close collaboration with our customers and partners to limit our environmental footprint and to enable sustainable economic growth for all. In Australia too, we are committed to this vision, and Rexel Holdings Australia operates in every state with a total of 200 branches, including specialist branches, plus a project office in each state and an export department in Queensland. Our long history and experience uniquely position us to provide you with the latest in a diversified range of products, global purchasing power, stronger strategic supply alliances with international manufacturers and benefits from distribution efficiencies.

Activity:

Specialisation:

Rexel’s International Projects Group (IPG) supplies globally sourced electrical materials and services to the world’s premier engineering, construction, and project management companies.

Mining and CSG-LNG trade exhibitions.

Website:

www.reedminingevents.com.au Offices: NSW Address:

Phone:

Locked Bag 7888, CHATSWOOD, NSW 2067

02 9422 8822 02 9993 8342

Fax:

As a part of the Rexel Group – Rexel Electrical Supplies, Rexel Automation Solutions (formerly Inaco), Rexel Data Solutions (Page Data) and Rexel Energy Solutions (Eco Power Savers) IPG is able to leverage the resources of the leading global supplier of electrical products and services. Our focus is your large construction projects in energy, infrastructure, mining, and government segments. Our team is located at key geographical regions across the globe. Our goal and commitment is to become your long-term strategic partner for electrical products and services; adding value project-by-project. Let us help you design a material management solution for your next global project.

Products: At Rexel, we are your electrical distributors and partners for all major electrical products from electrical cables – control, data, instrumentation to power cables; cable glands, cable accessories and support products,

MESCA MEMBERS DIRECTORY VOL 8 • 127

MESCA SUPPLIERS Industry Buying Guide

cable tray and ladder; to networking and telecommunication products to junction boxes, condition monitoring, control and switching, lighting, fuses, transformers, distribution boards, hazardous area lighting and signage, hazardous area control gear, grounding and lighting products, to name a few, of more than 160,000 products accessible via our online Web store and National Branch Network for our most important customer, you.

•

Emulsion of ‘microscopic superabsorbent polymers’

•

Heavy viscous polymers to bind fine dust particles

•

100% Environmentally Safe

•

Zero harm to machinery.

We are committed to tailoring and supplying you with globally sourced and locally distributed bulk Electrical, Electrical Consumables and Material service solutions for appropriate aspects of your project.

University testing has proven that RT5 Superskin uses 90% less product than our competitors and with zero dust lift-off after a single application, this means less batching and application requirements, resulting in a huge reduction in ours and our clients’ Carbon Footprints.

Website:

Other Countries:

www.rexel.com.au www.rexel.com; www.rexelipg.com

South America, South Africa, Asia, New Zealand, New Caledonia.

Offices: QLD Address:

Phone:

Unit 3/9 Graystone Street, TINGALPA, QLD 4173

07 3368 8200 07 3908 1069

Fax:

Reynolds Soil Technologies Pty Ltd About: Reynolds Soil Technologies (RST) is a multi-award winning company that specialises in providing comprehensive, environmentally friendly dust, earth and water solutions to the mining, construction, civil and agricultural industries globally. With over 20 years’ experience, industry research and development, RST is recognised as a market leader of superior products. RST identifies the true nature of a problem and develops a solution to achieve optimal outcomes utilising products and systems tailored for each individual project. All RST products are supported by the company’s Technical Services Division, who not only ensure the most suitable products are selected, but that they are also applied correctly on an ongoing basis. RST ensures their solutions are: •

Cost-effective

•

Active in environment working conditions

•

Environmentally safe in nature

•

Utilising water saving technologies.

RST are focused on constantly improving its technologies and products to ensure clients always receive the best possible solution available on the market today.

Products: Dust Management – dust suppression, dust modelling and dust monitoring Road and Soil Stabilisation – ground stabilisation, road stabilisation, haul road management and rock stabilisation Sediment Control – dewatering of mineral slurries and materials, water clarification and sediment control Erosion Control – soil erosion, weathering erosion and erosion deposition Agriculture and Specialty – farming, gardens, vineyards, sporting arenas and water run-off.

New Products: RT5 Superskin is a unique emulsion of cross linked polymer for ‘non trafficked’ areas, which is diluted at ‘ultra low concentration’ in water and sprayed onto all forms of exposed stockpiles, ground, sand, minerals and tailings to create a flexible veneer (skin/crust), which totally binds up all fines to eliminate dust.

128 • MESCA MEMBERS DIRECTORY VOL 8

Specialisation: Dust Control, Road Stabilisation, Total Dust Management, Soil Stabilisation, Sediment Control, Water Treatments and Erosion Control.

Website:

www.rstsolutions.com.au Offices: Headquarters – QLD Address:

Phone:

Fax:

14 Greg 07 5522 0244 07 5522 0799 Chappell Drive, BURLEIGH HEADS, QLD 4220

Rezitech Services Pty Ltd About: Rezitech Services, a 100% Australian-owned company with representatives in every state as well as workshops located in Melbourne and Townsville, have been a supplier and repairer of vacuum pumps used in coal wash stations as well as gas extraction/compressor vacuum pump applications for many years. Our extensive capabilities provide comprehensive design and manufacture of vacuum pump packages, including on-site installation. Our pump supply and repair service, which includes most makes and models, consists of on-site efficiency testing, repair services, replacement parts, vacuum pump rental, service exchange and new Flowtech or Robuschi vacuum pumps. Further to vacuum pump repairs, Rezitech Services has an extensive repair service for the following rotary equipment: boiler feed pumps, water pumps, slurry pumps, concrete pumps, molasses pumps, vane pumps, submersible pumps, Roots blowers and Hoffman centrifugal blowers. Rezitech Services are the exclusive Australian distributor for the Belzona cold curing range of wear and chemical-resistant metal, steel, elastomeric, concrete coatings as well as alumina tiles for high resistance to abrasive conditions Rezitech Services for over forty years have been supplying and applying Belzona protective coatings, which have many uses in all process industries including cold curing, wear resistant coatings providing similar wear rate to basalt tiles. Belzona protective coatings are used for internal lining of pipes, tanks, separator, production vessels, Pylons and pumps as well as rebuild and coating materials for erosion, corrosion and abrasive attack. Rezitech also have the latest technology in Sponge-Jet surface blasting equipment, which allows superior surface profiling and levels of cleanliness to be achieved whilst reducing the airborne particles by up to 85% of that typically produced by traditional blasting methods. With the use of Sponge-Jet blasting equipment and the superior level of surface profile and cleanliness being accomplished coating life cycles can be significantly increased. Rezitech Services provide a superior supply and apply service carried out by authorised contractors who are able to service all aspects of industry.

Activity: Vacuum pump supply and repair. Onsite training in vacuum pump technology and operation. Sponge Jet low dust abrasive blasting and substrate preparation prior to coating.

MESCA SUPPLIERS Industry Buying Guide

Rittal Pty Ltd

Products: Vacuum pump supply and repair service Belzona Polymeric Coatings

Activity:

Alumina Tiles

Supply of Industrial and Data Communication Enclosure systems to a wide range of Australian and New Zealand industry.

Sponge Jet abrasive blasting and surface preparation technology.

Other Countries: Pumps – South Africa, Indonesia, Thailand, Papua New Guinea, the United Kingdom.

Specialisation:

Offices and stocking warehouses in all Australian States, as well as New Zealand, give Rittal the ability to service its extensive product range to all market sectors.

Products: Enclosure systems in sheet steel or stainless steel.

•

High level wear resistant polymer coatings, supply and application.

All applications are covered by the extensive Rittal product range.

•

Design and supply of vacuum pump complete packages as well as gas extraction packages.

New Products:

•

Supply of Sponge Jet low dust composite abrasive technology for substrate preparation prior to coating.

RiMine is the latest Rittal offering in enclosures to suit the rugged conditions that prevail in the mining industry.

•

Reduced levels of airborne particles up to 98% compared to traditional surface blasting preparation.

The new RiMine sloped roof enclosure gives the mining industry 12 variants to select from to suit their unique application.

Website:

Equipment:

www.rezitech.com.au

Enclosure systems.

Other Countries:

Offices: Head Office – VIC Address:

Phone:

Fax:

9 Southfork Drive, 03 8720 8600 03 9761 4159 KILSYTH, VIC 3137

Rittal is a Global manufacturer with 19 manufacturing plants worldwide. Rittal is represented in over 100 countries worldwide.

Specialisation: Standard enclosure systems customised for our clients’ needs. Express turnaround time for customised products.

Ringway Materials Handling About: Ringway Control and Automation specialises in innovative ‘Two-wire Technology; solutions for the materials handling industry. Our conveyor products include systems for distributed emergency stopping, remote isolation, pre-start warning alarms and analogue condition monitoring. Other systems provide mine traffic control and distributed site evacuation alarms. Using just two wires, all systems are very simple, safe and reliable over huge distances and in hazardous atmospheres. Our two-wire Lanyard Switch Emergency Stop System, ‘RINGLINE’, is designed and built to last and can protect up to 12km of conveyor with a single controller. When used in conjunction with our pre-start alarm, personnel protection is assured, using extra low-voltage only. Over the past 8 years, such systems have provided unparalleled reliability and performance at many critical 24/7 operations throughout Australia and overseas. Owners of these operations include BHP Billiton, Rio Tinto, Xstrata, Anglo Coal, Australian Bulk Minerals and Austral Coal.

Activity: Ringway Control and Automation is an electrical design and manufacturing company.

www.rittal.com.au Offices: QLD Address:

Phone:

2/20 Graystone Sreet, TINGALPA, QLD 4173

07 3890 4255 07 3890 3834

Fax:

Rocla Pipeline Products About: Rocla is a leading manufacturer and supplier of precast concrete infrastructure materials. With manufacturing centres servicing every state in Australia, and supported by our own engineering and design team, we are able to assist you with any infrastructure project from small camp setups to large-scale mine sites, rail lines and ports.

Products:

Website:

www.ringway.com.au Offices: QLD Address:

Website:

Phone:

Fax:

Unit 10, 07 4952 4100 07 4952 2216 Woodman Parade, MACKAY, QLD 4740

Stormwater Drainage products Steel Reinforced Concrete Pipe Steel Reinforced HDPE Pipe Reinforced Box Culverts Circular and Square Drainage Pits Stormwater Treatment Devices Oil Water Separators Stormwater Storage and Reuse Tanks.

New Products: Vertical Segmental Shafts Precast components in smaller manageable segments to safely and quickly construct vertical shafts to a range of sizes MESCA MEMBERS DIRECTORY VOL 8 • 129

MESCA SUPPLIERS Industry Buying Guide

Civil Infrastructure

engineering and construction companies, industry associations, seismic data acquisition contractors and other infrastructure and asset owners.

Bridges Earth Retention

Other Countries:

Vertical Shafts

United Kingdom; Ireland; The Netherlands; United States; Canada.

Waterway and Seaside Erosion Control Boardwalks

Website:

Power Transmission Poles

www.rpsgroup.com.au

Light and Communication Towers

Offices: QLD

Mainline and Turnout Rail Sleepers Marine Piles Wharf Decks Environmental Stormwater and Rainwater Detention and Reuse Tanks Oil Spill Control Oil Water Separators

Address:

Phone:

743 Ann Street, FORTITUDE VALLEY, QLD 4006

07 3237 8899 07 3237 8833

Fax:

Ruswin Integrated Security Systems

Stormwater Filters GPTs Oil Sediment Traps Sewer Overflow Treatment and Storage.

About:

Website:

RUSWIN has years of experience in the Locksmith, Hardware & Security Industries.

www.rocla.com.au Offices: VIC Address:

Phone:

33 Kiewa Valley Road, BANDIANA, VIC 3690

02 6055 7300 02 6055 7301

Fax:

RPS Australia East Pty Ltd About: RPS is an international consultancy providing world-class local solutions in energy and resources, infrastructure, environment and urban growth. We employ more than 4500 people across the UK, Ireland, the Netherlands, the United States, Canada, Australia and Asia Pacific, and undertake projects in many other parts of the world. In the Australia and Asia Pacific region, our professional and technical staff work from 23 locations, including metropolitan and regional centres in resource-rich and high growth areas.

Activity: Committed to supporting world-class, environmentally responsible development, we have the capabilities to assist clients to develop projects from concept to implementation, including environmental and regulatory approvals, environmental management, ecological assessments and monitoring studies, surveying and contamination assessment and remediation. We are also experienced in working with resources and mining companies to build communities through the development of social and community infrastructure.

The company has a history focused on quality customer service and reliability, and continues to meet the requirements of existing and new clients with its ability to offer. TOTAL SECURITY SOLUTIONS. Through training and recruitment, Ruswin have a technical base capable of providing state of the art, total security packages to suit individual client requirements. The integration of Locksmithing, Hardware and Electronic Security has culminated in Ruswin being able to provide services encompassing the total security field. Ruswin head Office is located in Townsville, North Queensland, with branches also located in Mt. Isa, Western Queensland, servicing the mineral mines in the Carpentaria Mining Province and the isolated communities of Cape York. Our branch in Rockhampton, Central Queensland services the Bowen Basin area including coal mines and commercial building projects. Our domestic client base is spread over many hundreds of kilometres. Ruswin appreciates the difficulties our clients experience when operating in isolated regions and strives to provide them with the best service possible. We also have offices in Papua New Guinea and Indonesia servicing many international clients. Customers benefit from Ruswin’s ability to supply and service all aspects of their individual requirements. Over a decade ago the company reassessed industry and consumer trends and elected to grow the business to provide for its clients “Total Security Solutions”.

Activity: The company’s core business is Security Systems. We provide the simplest to the most sophisticated items for resource company security, isolation LOTO products and asset protection.

Products: MASTER LOCKSMITHS: •

Master key systems and Restricted key systems

We have vast experience working with communities in rural and remote locations, and have developed strong relationships with Indigenous communities throughout Australia.

•

Safes, Strong room doors, Dead locks, Electronic Keysafes and Isolation padlocks.

Products:

•

Cardax FT, Photo ID with integrated access control systems and Biometrics

•

Magnetic Auto Control Electronic Gates, Boom Gates and Turnstiles

•

Intercom systems with integrated access control.

RPS helps clients develop their natural energy resources across the complete asset life cycle. We combine our technical and commercial skills with an extensive knowledge of environmental and safety issues. Our breadth of experience in the energy and resources sector spans three decades. Our clients include multinational, national and independent energy and resource companies, governments, independent operators,

130 • MESCA MEMBERS DIRECTORY VOL 8

ACCESS CONTROL:

CCTV (Closed circuit television): •

DVRs (Digital Video Recording)

•

IP Cameras solutions

MESCA SUPPLIERS Industry Buying Guide

Website:

•

Fixed Cameras and Dome Cameras

•

PTZ (Pan Tilt Zoom) Cameras

•

Time and date stamped image recording.

www.samtechnology.com.au Offices: NSW

ALARMS MANAGEMENT: •

Intruder Alarm systems

Address:

Phone:

•

Perimeter security

02 9721 5900 02 9721 5999

•

Alarm monitoring

•

Gallagher Power fencing.

PO Box 6947, WETHERILL PARK, NSW 2164

Fax:

SYSTEM INTERGRATION: •

Cardax FT is a comprehensive Microsoft® Windows® based security System

•

Cardax Integrates Access Control and Alarms Management, intruder alarm monitoring, CCTV and remote digital imaging, intercom communications and Photo ID badging

•

The Cardax System is very flexible, enabling it to meet the needs of small single sites right through to very large global enterprise-wide installations.

New Products: •

National Police Records Checks (NPRC) through the CrimTrac Agency (authorised broker)

•

Pre employment checking to Government agencies and private industry

•

Personnel Vetting Services to Government and Industry providers contracted to Government Agencies for National and Non National security clearance from Restricted to Top Secret (Positive Vetting).

Other Countries: Papua New Guinea; Indonesia; New Caledonia.

Specialisation: Master Locksmiths, Isolation padlocks, Key Safes, Safes, Back to Base Alarm Monitoring, Alarm Systems, CCTV Systems, Access Control systems, Gates, Boom Gates, Turnstiles, Police Records Checks.

Samson Controls Pty Ltd About: SAMSON – A name recognised worldwide, synonymous with quality work, entrepreneurial spirit and innovative strength. The company is known for a complete product line in instrumentation and controls up to the most modern integrated automated systems. The field of expertise extends from Food and Beverage, Heating/Ventilating and Air-Conditioning technology to applications in the largest Chemical, Mining and Oil and Gas plants. SAMSON is active wherever there is need for controlled flow of vapours, gases, liquids and chemicals.

Activity: Samson Controls design and supply control valves, and regulators for industrial applications worldwide. We supply everything from single valves for HVAC or Food and Beverage industries to speciality valves and complete projects for Mining or Power Generation, all from within the Samson Group.

Products: Samson: control valves, self-operated regulators, positioners, converters, process control equipment Pfeiffer: Valves for the chemical industry including PTFE lined. PFA Lined, Noble metals Vetec: Rotary plug valves and actuators Leusch: High-performance butterfly and ball valves

Website:

Welland and Tuxhorn: specialised valves for the Power Generation sector

www.ruswin.com.au

Starline: Ball valves, general purpose, up to high pressure for the Oil and Gas industry

Offices: Head Office – QLD

Air Torque: Pneumatic rotary actuators for industry

Address:

Phone:

Fax:

54 Charters Towers Road, HERMIT PARK, QLD 4812

07 4720 8900 07 4720 8908

Samsomatic: Measuring and control equipment solutions for process automation.

New Products: 240 Series Control Valves: for industrial applications 250 Series Control Valves: for high-pressure applications – up to ANSI 2500#

SAM Technology Engineers Pty Ltd

9347 Valves: for Sanitary applications in the food and beverage industry 3510 Microflow Valves: for accurate control of very low flow rates 3730 Series Positioners: Smart-digital, HART, Profibus, Foundation FieldBus 3731 Series Positioners: for Explosion proof applications

About:

3738 Electronic limit switches: for ¼ turn applications

Established since 1934. Specialised materials handling design and manufacturing company.

2405 and 2407: Compact Pressure Regulators.

Activity:

41-23 and 41-73: Universal pressure reducing valves

Other Countries:

Design and Manufacturing. Engineering workshop with medium to large capacity. CNC machining, mechanical fabrication.

Worldwide (see Website).

Products:

www.samson.de

Brakes, couplings, winches, track wheels, cranes and attachments, sheaves, bogies. Controls design.

Website:

New Products: Crane/operator cabin and seats. Anti-collision devices.

MESCA MEMBERS DIRECTORY VOL 8 • 131

MESCA SUPPLIERS Industry Buying Guide

Offices: Head Office – NSW Address:

Phone:

Fax:

Units 13-15, 02 9316 7800 02 9666 5963 61-71 Beauchamp Road, MATRAVILLE, NSW 2036

Email: sales@samsoncontrols.com.au

With close to 40 years’ experience in proving fleet services, we deliver unrivalled commercial fleet solutions to companies operating in the mining, infrastructure, construction, oil and gas, service support, major projects and related industries. Our modern fleet of over 4,000 vehicles comprises an extensive range of 4WDs, 2WDs, trucks, buses and specialised vehicles that are provided over a national network of company-owned branches and agencies. Our market knowledge, national coverage and proven track record ensure all our clients are supported with the best fleet mix and vehicles specifications for their business or project within specified constraints. For all of your rental and maintenance requirements, call Sargent.

Sandvik Mining & Construction Australia Pty Ltd Offices: QLD

Activity: Rental and maintenance of light and heavy commercial vehicles

Products: Light Commercial Vehicles

Address:

Phone:

Fax:

60/62 Qantas Drive, BRISBANE AIRPORT, QLD 4007

07 3637 7370 07 3637 7511

Sargent About: Sargent is one of Australia’s leading specialist national fleet services companies, providing rental and maintenance of commercial vehicles throughout the country. With a network of strategically placed locations, our coverage is amongst the best in the industry.

2WD Single Cab Dual Cab 4WD Trayback Dual Cab Wagon 8 Seat Manhaul Troopcarrier Heavy Commercial Vehicles BUS 12 Seat 21/22 Seat

HOW CAN YOU INCREASE BOTH SAFETY AND YOUR PRODUCTION RATE? THIS WAY!

If you are in the mining business, you know that an improved safety record means a lot to your employees and your entire company. This safety mind-set is part of everything we do – from research and product development to on-site service. Join the movement towards The Future of Mining. It´s This Way: www.mining.sandvik.com/au

SANDVIK MINING Par t S ales 18 0 0 1 72638 45 | Gener al Enquiries 130 0 1 72638 45 info.smc- au@sandvik .com | w w w.mining.sandvik .com/au

326313A_Sandvik Mining | 2065.indd 1 132 • MESCA MEMBERS DIRECTORY VOL 8

4/12/13 10:25 AM

MINE SPEC READY

For more information call your local Sargent representative on 1300 SARGENT.

www.sargent.com.au

MESCA SUPPLIERS Industry Buying Guide

Products:

25 Seat Off Road Truck Bus Combination

Microsoft Dynamics® AX solutions for:

TRUCK

Financials Management

Crane Truck (2WD and 4WD)

•

Financial Management

4WD TRUCK

•

Commitment Accounting

Tipper

•

International Requirements

Prime Mover.

•

Procurement

Equipment:

•

Project Costing

•

Human Capital Management

•

Enterprise Portal

•

Workflow.

Fully BMA Compliant; Fully LH8 Compliant.

Specialisation: Rental vehicles, vehicle fit outs, light and heavy commercial vehicle maintenance.

Website:

Exploration Management •

Tenement Accounting

•

Drill and Planning.

Reliability Management

www.sargent.com.au Offices: QLD Address:

Phone:

PO Box 99, WILSTON, QLD 4051

07 3857 9777 07 3356 8254

Fax:

Scalable Data Systems About: Dynamics AX for Mining Whole of Mine Solution The Microsoft Dynamics AX Foundation Pack is perfectly designed to take a mine into operation, gaining users and functionality seamlessly as the mine grows. Starting from as few as one or two users, the “AX for Mining” solution can grow to meet the requirements of each phase of the mine’s life cycle by simply scaling up painlessly as operations expand. Users are added as the Exploration phase is completed and the mine’s Feasibility is verified. In these early stages, no matter how many sites you are managing, the Microsoft Dynamics “AX for Mining” solution will manage any sudden upsurge in activity, seamlessly accessing modules as each stage of any of the sites is completed and the mine roars into life. Microsoft Dynamics AX for single and multi-site mining covers the management of Financials, Exploration, Reliability, Workforce and Physicals, and will remain in use through to the mine’s eventual closure. Microsoft Dynamics AX Enterprise Plus offers solutions that further enhance and streamline the mine’s ERP system. Adding Drill and Blast, Load and Haul, Stockpile Management, Fleet Management and Metallurgical Processing to name only a few, the solution now encompasses all requirements in one package. Information now flows from all of the mine’s areas of operation, through to head office, allowing management an unprecedented level of control over all aspects of the mine with addition of Physicals Management.

•

Service and Maintenance

•

Service Scheduling

•

Spare Parts Planning

•

Stores and Warehousing

•

Price and Availability.

Physicals Management •

Drill and Blast

•

Load and Haul

•

Stockpile Management

•

Metallurgical Processing

•

Laboratory System

•

SCADA Interface.

Workforce Management •

Payroll

•

Human Resource Management

•

Competencies and Training

•

OH&S

•

Rostering

•

Flights and Accommodation.

New Products: Microsoft Dynamics®; AX whole mine life cycle Scalable recognises that not all mines are at the same stage of the life cycle, and we have attempted to outline in the following how different mining operations can take advantage of the Microsoft Dynamics “AX for Mining” Solution. Whether the site is in the conceptual stage, in partial development or in full production, Microsoft Dynamics “AX for Mining” Solution will simply revolutionise the mine life cycle. Greenfield ‘Exploration’

As the AX solution is integrated; there are no gaps in the flow of information and no need to replace a start-up system just to handle Production and Processing Management. Information is available online in real-time, allowing quick response and reporting.

By combining Dynamics AX Financial Management with Dynamics AX Physicals Management for drill hole planning and reporting of test results, a mining company can make one of the wisest investments in their ERP roadmap, by providing a foundation for operations that can simply grow as the mine does.

Access the complete Dynamics AX for Mining brochure range online at www.scalable.com.au, or email info@scalable.com.au.

The AX Foundation Pack for single and multi-site mining can be purchased for less than the price of a very small car.

Activity:

Greenfield ‘Feasibility’

Scalable Data Systems blends the perfect mix of technology, experience and excellence to deliver integrated; Microsoft Dynamics® AX ERP solutions for Mining and Mining Services suppliers. Scalable Data Systems is an award-winning and long-established Microsoft Partner dedicated to designing and implementing optimum ERP (Enterprise Resource Planning) solutions.

134 • MESCA MEMBERS DIRECTORY VOL 8

If a mine already had the core foundation of Dynamics AX for Finance and Physicals, in this stage they could simply add the Dynamics AX Reliability Management solution for Maintenance, HRM and OH&S. The HRM software licence is already included in the core foundation Financial Management Pack and can be turned on at any time. If the mine has been using an off-the-shelf accounting package, at this stage they could simply install the Dynamics AX Finance, Physicals and Reliability Management solution elements of the “AX for Mining” solution.

MESCA SUPPLIERS Industry Buying Guide

Brownfield ‘Early Production’ If the mine is simply upgrading from the Dynamics “AX for Mining” solution already implemented in the Feasibility Phase, then at this time the implementation of the Dynamics AX Workforce Management elements can be completed – adding Payroll and Rostering to complement the HRM and OH&S already installed in the Reliability Management solution. If installing Dynamics “AX for Mining” for the first time, then the mine simply implements the AX elements for Finance, Physicals, Reliability and Workforce Management solutions. Brownfield ‘Established Production’ There are a number of options for mines at this level of maturity. Mines face demands to lower cost of production continually. If the existing ERP solution is old and not providing all the support and information a modern mine needs in today’s competitive market place, then the Dynamics “AX for Mining” solution could be considered for a full replacement. Alternatively there may be specific pains around workforce and physicals management that could be refined and managed by the strategic implementation of the “AX for Mining” solution required to address this need.

Website:

www.scalable.com.au Offices: Head Office – QLD Address:

Phone:

Fax:

Level 2, 97 Warry Street, SPRING HILL, QLD 4000

07 3851 7300 07 3851 7399

Scania Australia Pty Ltd About: Scania is one of the world’s leading manufacturers of trucks and buses for heavy transport applications, and of industrial and marine engines and Gensets. Scania is present with a sales and service organisation in more than 100 countries, and offers more than 1600 service locations worldwide. Scania focuses only in the 16-tonne and above truck market, supplying longhaulage contractors, and providing transport solutions for forestry, mining, construction and public services. In 2012, Scania delivered more than 61,000 trucks and 6300 buses. Scania has a network of 10 factory-owned branches in Australia that offer sales and service, backed by a network 40 independently owned service dealers. Scania supplies more than hardware, providing a Total Transport Solution for customers that focuses on improving their profitability. This is achieved via correctly specifying products for the application and ensuring these products are used in the most efficient and safest manner possible, delivering maximum uptime.

Activity: Scania is active across the globe and has assets deployed at mines on all continents. Scania trucks, buses and industrial engines are exceptionally reliable and durable, and welcomed by mining operators, particularly because their fuel consumption and emissions are so low. Scania in Australia is developing a complete range of hardware solutions along with mining-specific after-sales solutions for remote area servicing, parts supply, technician training, driver training and eventually, hardware disposal.

Products: Scania Australia has developed a range of heavy-duty trucks suitable for Australian mining operators. The range starts with a P 360 4x4 tray top truck suitable for light delivery work, and expands upwards to a G 360 dumper truck that arrives from Europe with the body attached, and this is immediately ready for work.

For heavy haul activities, Scania has a V8-powered 620 hp prime mover that is rated to 200-tonnes GCM, able to pull 140-tonnes of ore and four side-tipping trailers. The first vehicle has already been deployed in WA, at a gold-mining operation. The R 620 can also be configured to cope with a 170-tonne payload and pull five trailers, and will be suitable for activities on coal and iron ore mining sites. All Scania vehicles look after their drivers with excellent dust sealing, cold air conditioning, comfortable seats, and industry-leading cabin ergonomics, while the cab-over design delivers excellent on-site vision. In addition, the all-steel cab has been impact tested to exceed the Swedish standards, which themselves exceed the European protection standards. Scania has been very successful in supplying mine-specification crew transport buses in the form of the Scania-Higer A30 mining bus, which seats up to 60 work crew. This is equipped with full mine-specification safety equipment. An operator in the north-west of Australia has upwards of 30 of these vehicles already in service, again providing excellent reliability, fuel consumption and uptime. Scania’s unique modular concept means that every engine is built from the same basic components, resulting in more secure spare parts availability, minimised waste and easy servicing by a single technician. Plus, Scania’s industrial engines are designed for 25% longer service intervals, with up to 500 hours between oil changes.

New Products: Scania is continually rolling out new products aimed at the mining industry. In addition to the vehicles listed above, Scania will be introducing a new range of Gensets in 2013. These are available with a wide array of Scania diesel engines, from 5- and 6-cylinder to the legendary Scania V8. They come Mted on a rigid frame for ease of movement, and can be specified with a specially-designed, fully-enclosing sound-attenuated canopy that provides protection from the working environment be it dusty, hot, wet, humid or a mix of all of these. The Gensets are rated up to 600 kVa for continuous use and as many as 32 units can be hooked up to deliver continuous reliable power, emergency power or intermittent power for a large worksite miles from the grid. Scania’s stand-alone industrial engines are ideal for pumping, irrigation or simply as an auxiliary power unit for driving a drill rig on the back of a Scania truck.

Other Countries: Scania is a global company with operations in Europe, Latin America, Asia, Africa and Australia. Scania’s sales and service organisation is present in more than 100 countries.

Specialisation: Demand for high uptime and reliability make Scania engines well suited to construction and mining activities. In addition to supplying Scania-branded vehicles to the mining industry, Scania also supplies engines to international earthmoving vehicle makers Terex and Doosan, further increasing the technology footprint across Australia, for instance. Scania’s modular engines mean technicians are able to service a wide array of machinery as well as provide spare parts backup from a small inventory of part numbers.

Website:

www.scania.com.au Offices: QLD Address:

Phone:

213 Holt Street, PINKENBA, QLD 4008

07 3712 7900 07 3712 7901

Fax:

The range also includes an 8x4 G 400 flat top complete with HIAB lifting arm that makes light work of moving machinery from site to site and can be hitched to a dog trailer for extra capacity. Scania has also just added an 8x4 G 400 Tilt Tray to its mining range, with a large capacity load bed and hydraulic arm.

MESCA MEMBERS DIRECTORY VOL 8 • 135

MESCA SUPPLIERS Industry Buying Guide

Schenker Australia Pty Ltd

•

Medium voltage distribution

•

Metering, protection and power factor correction

Offices: QLD

•

Variable speed drives and soft starters

•

Control and signalling components

•

Pressure and vacuum switches

•

Installed base services

•

Professional services

•

Training.

Address:

Phone:

Fax:

51-57 Qantas Drive, ALBION, QLD 4010

07 3622 7518 07 3860 5304

Schneider Electric (Australia) Pty Ltd About: From steel in the 19th century to electrical distribution and automation in the 20th, and energy management in the 21st, Schneider Electric has always been driven by an international, innovative and responsible mindset to shape the transformation of the industry it was evolving in. Our Products and Services solutions cover: •

Processes control and supervision

•

Power supply and distribution

•

Energy monitoring and control

•

Utility management (lighting, ventilation, elevators, intruder alert, etc.)

•

Smart electrical networks management

•

Single site or multi-site production data management

•

Critical power.

We offer integrated solutions that make energy safe, reliable, efficient, productive and green.

Activity: As a global specialist in energy management with operations in more than 100 countries, Schneider Electric offers integrated solutions across multiple market segments, including leadership positions in Utilities and Infrastructures, Industries and Machine Manufacturers, Non-residential Buildings, Data Centres and Networks, and in Residential. Focused on making energy safe, reliable, efficient, productive and green, the Group’s 130,000 plus employees achieved sales of 22.4 billion euros in 2011, through an active commitment to help individuals and organisations make the most of their energy. Schneider Electric has been present in Australia since the early 1960s. Since then, the company has played a critical role in providing electrical distribution, industrial control and automation solutions for some of this country’s key projects in mining, infrastructure and manufacturing. Today, Australia has over 3300 employees and multiple manufacturing plants strategically distributed around the country. The company’s turnkey project capability greatly reduces overall project execution time, thus enabling customers to get into operation sooner. Schneider Electric has developed expertise in many industry sectors. In mining, its global experience has led to the refinement of tools and systems that are adaptable to each individual mining application. The company has created innovative architectures and integrated solutions that will both increase efficiency, production capacity and scalability along with improving safety standards within the mining industry. The integrated mining solution provides real-time access to plant and business information from the operations management system. This allows customers a single view of their entire business. Schneider Electric places people safety, equipment longevity and environmental sustainability at the core of its methodologies.

Products: •

Automation and HMI

•

SCADA and MES

•

Telemetry and Remote Scada

•

Low-voltage distribution

136 • MESCA MEMBERS DIRECTORY VOL 8

New Products: Renewable technology products and services.

Other Countries: Present in more than 100 countries.

Specialisation: Packaged project solution to save customers time and resources in deploying projects on site.

Website:

www.schneider-electric.com.au Offices: NSW Address:

Phone:

Fax:

78 Waterloo Road, 1300 369 233 1300 369 288 MACQUARIE PARK, NSW 2113

Sedgman Limited About: Sedgman Limited (ASX: SDM) was established in 1979 and is a leading provider of mineral processing and associated infrastructure solutions to the global resources industry. Sedgman listed on the ASX in June 2006. The company has approximately 1,000 personnel, and services the global coal and metalliferous markets by offering innovative Projects and Operations capabilities. Head Office is in Brisbane with international offices established in Beijing, Shanghai, Ulaanbaatar, Santiago, and Johannesburg, targeting the growth regions of China/Mongolia, South America and southern Africa. Sedgman won the Prime Minister’s Australian Exporter of the Year Award for 2011. The company also won both the Australian Export Award and the Premier of Queensland’s Export Award in the Minerals and Energy category in 2011, and the Australian Export Award and the Premier of Queensland’s Export Award in the Large Services category in 2010.

Activity: Sedgman provides multidisciplinary engineering, project delivery as well as operations services to a widening range of industries and world regions, maintaining a major focus on health, safety and the environment. Sedgman works closely with blue chip and emerging mining clients to tailor fullyintegrated coal and metals processing solutions.

Other Countries: Asia (China, Mongolia, Laos, Indonesia, PNG), South America (Chile, Colombia), Africa (South Africa, Mozambique, Botswana, Congo, Mauritania).

Specialisation: Specialising in the design, construction and operation of coal handling and preparation plants (CHPPs), Sedgman is recognised internationally for its mineral processing and materials handling technologies.

Website:

www.sedgman.com

MESCA SUPPLIERS Industry Buying Guide

Offices: Head Office – QLD

Specialisation:

Address:

Phone:

2 Gardner Close, MILTON, QLD 4064

07 3514 1000 07 3514 1999

Fax:

•

Automation and Control

•

Building Engineering

•

Bulk Materials Handling

•

Environmental and Infrastructure

•

Facilities Management

SEMF Pty Ltd

•

Industrial Engineering

•

Information Technology

About:

•

Infrastructure Engineering

•

Planning

•

Process and Manufacturing Engineering

•

Risk Engineering and OH&S.

SEMF is an independent engineering, environmental and management consulting firm with a wide national presence and an interdisciplinary focus. We offer planning, design, project management and consulting services across the building and property, manufacturing and processing, energy and resources industries. Through our work, we shape the built and natural environment for the better.

Activity: Founded in 1980, SEMF is known for its innovative design approach, technical excellence and ability to master complex projects spanning various disciplines. Our work on the state-of-the-art moving roof system for Melbourne’s iconic Etihad Stadium and projects such as the Royal Hobart Hospital, Darwin Port Corporation shiploaders, the Friskies pet care factory for Nestle Australia and the Sugarloaf Pipeline have cemented our reputation for thought leadership as well as our sharp commercial awareness and commitment to sustainability. At SEMF, we owe our success to a spirit of collaboration and on partner relationships that are driven by open communication and mutual respect. We have an operational agreement with Tenova Spa, through our joint venture company Tenova-SEMF, a partnership that plays a critical role during the design and construction phases of large-scale mobile machines. SEMF brings together talented individuals from a broad range of disciplines and encourages them to look beyond the limits of their own expertise. We are wholly owned by our staff and employ over 130 engineers, managers, consultants and technical specialists across offices in Melbourne, Sydney, Hobart and Launceston.

Products: •

Electrical Engineering

•

Mechanical Engineering

•

Fire Safety Engineering

•

Fire Services Engineering

•

Vertical Transportation Engineering

•

Structural Engineering

•

Civil Engineering

•

Telecommunications Engineering

•

Process Engineering

•

Town Planning

•

Software Engineering

•

Environmental Sciences

•

Due Diligence Auditing

•

Condition Auditing

•

Contaminated Site Auditing & Remediation

•

Environmental Management Planning

•

Performance Design & Certification

•

Building Surveying

•

Project and Construction Management

•

Training

•

Energy Management

•

Strategic Asset Management

•

Chemical Engineering

•

Risk Engineering OH&S Management.

Website:

www.semf.com.au Offices: NSW Address:

Phone:

Level 3, 50 Berry Street, NORTH SYDNEY, NSW 2060

02 8912 9400 02 9957 4815

Fax:

SEMF66 Mesca QPV ad_HR EDIT.pdf

10/21/12

2:15 PM

Integrated mining solutions Engineering design Environmental approvals Project management

1300 35 SEMF

www.semf.com.au

327406A_SEMF | 2065.indd 1

13/11/13 3:24 PM

MESCA MEMBERS DIRECTORY VOL 8 • 137

MESCA SUPPLIERS Industry Buying Guide

SEW-Eurodrive

SG Partners

About:

SEW-EURODRIVE is a global designer and developer of mechanical power transmission systems and motor control electronics. As a key supplier to the Australian mining industry, we believe in quality and efficiency when it comes to drive technology. Supplying a range of industrial gear units, motors and drives for especially large movements, we deliver more than just products to heavy industry. A team of talented engineers develop effective and timely solutions based on customers’ motion requirements, which are backed by after-sales commissioning and product support that is second to none. We also understand that time is money, so units are delivered within a matter of weeks from our local assembly plants, rather than waiting months for items to be shipped from overseas.

SG Partners was conceived in 2007 by Michael Lang, Ex EO MESCA because he “wanted more organisations to realise their untapped potential”.

The Australian division of SEW-EURODRIVE is headquartered in Melbourne and is supported by a network of offices in New South Wales, Queensland, South Australia and Western Australia.

Activity:

Activity: SEW-EURODRIVE provides packaged drive solutions for a range of industries, including food and beverage, shipping, ports, and of course, the mining industry.

Products: The company covers a broad spectrum of power transmission equipment, including energy-efficient electric motors, geared motors, variable speed drives, frequency inverters, servo technology, decentralised technology and heavy industrial gears used in the mining sector.

New Products: SEW-EURODRIVE has introduced the segmented girth gear solution for transmitting energy in large, rotating systems to its range of Heavy Industrial Solutions. SEW can produce segmented girth gears with a pitch diameter up to 16m and a width up to 600mm. Due to the segmented design principles, even larger diameters and widths are possible. The power range reaches up to 2500 kW per pinion. The use of special ADI cast material means that SEW-EURODRIVE girth gears have industry-leading material properties providing minimal wear. This enables SEW to offer a smaller tooth width than competing technologies can, allowing customers to save on the overall system. SEW-EURODRIVE provides customer-specific solutions within its existing product range, delivering not only segmented girth gears, but, the entire drive package. Girth gears are used to drive grinding mills, kilns and rotary dryers.

Other Countries: Available worldwide, you can reach SEW-EURODRIVE just about anywhere around the globe.

Specialisation:

Our passion is to see more business owners, shareholders, sales teams and customers grow and benefit through performing at their absolute best more often. We assist people and companies to understand what they need to do to consistently increase their individual and team performance. SG Partners work with clients to help them realise more value by increasing market share, revenue and profit from their existing clients, as well as getting a better return from New Business Development activities.

We are passionate about helping sales teams get more traction quickly by: •

Analysing sales team capabilities and skills gap

•

Providing prescribed training and coaching programs

•

Providing selection services for exceptional Sales and Sales Management personnel

•

Providing consulting around Sales process, remuneration programs and go to market strategies

•

Maximising profit and Commercial terms

•

Aligning brand and marketing presence

•

Creating value for internal and external stakeholders.

www.sgpartners.com.au | info@sgpartners.com.au

Products: •

Sales Team Training Analysis (OMG)

•

Sales Recruitment Screening Tools (OMG)

•

Sales Engagement Services

•

Sales Training

•

Client Retention Practices

•

CRMs

•

Marketing Approaches

•

Organisational Solutions.

New Products: •

Sales Candidate Screening Systems – see our Website: www.sgpartners.com.au

•

Sales Personnel Assessments

•

Company Sales Management Performance.

Equipment: Check out More Positive News Mining and Energy Blog

Helical gear units, helical-bevel gear units, planetary gear units, complete drive assemblies.

www.miclang.wordpress.com/

Website:

We deliver expert Sales and Profit Growth for Outstanding people and organisations that want to exceed their goals NOW.

www.sew-eurodrive.com.au Offices: Head Office – VIC Address:

Phone:

Fax:

27 Beverage Drive, 03 9933 1000 03 9933 1003 TULLAMARINE, VIC 3043

138 • MESCA MEMBERS DIRECTORY VOL 8

Specialisation: Website:

www.sgpartners.com.au Offices: Head Office – QLD Address:

Phone:

1/34 Commercial Road, NEWSTEAD, QLD 4006

07 3852 5454 07 3852 6282

Fax:

Siemens. Your innovative technology partner in mining. Enabling companies in Australia to improve their productivity through innovative technology for 140 years. www.siemens.com.au/mining Siemens has been partnering with mining companies in Australia to deliver technology solutions that help solve some of the industryâ&#x20AC;&#x2122;s greatest challenges. Harsh climates, remote sites, safety and environmental issues, the rising costs of energy and the scarcity of water are just some of the challenges that we help our customers turn into opportunities.

Our extensive installed base of mining technology throughout Australia means that Siemens technology is helping almost every mine site and mining company to deliver valuable resources in ways that are more efficient and productive, safer and more reliable. For more information please visit www.siemens.com.au/mining or email mining.au@siemens.com

Answers for Mining.

MESCA SUPPLIERS Industry Buying Guide

SGS Australia Pty Ltd Offices: NSW Address:

Phone:

16 / 33 Maddox Street, ALEXANDRIA, NSW 2015

02 8593 0400

New Products: Supported by a dynamic research and development program, Siemens can offer the latest innovations for the mining, aggregates and cement industries through emerging technologies, including the following new releases. Process instrumentation and analytics technologies:

Shannon Power Management Offices: WA

•

LDS6 laser spectrometer

•

MSI belt weigher

•

LR260 and LR460 radar

•

LG200 guided radar

•

Transmag AC mag flow meters

•

SITRANS FUS ultrasonic clamp-on flow meters.

Totally integrated automation systems:

Address:

Phone:

Fax:

Level 29, Unit 31, 221 St Georges Terrace, PERTH, WA 6000

08 9480 3774 03 9933 1003

Siemens Ltd About: Siemens in Australia and New Zealand employs over 2,000 people who create and deliver leading-edge products and services to our customers from numerous locations in Australia and New Zealand. As part of one of the largest electrical engineering and electronic businesses in the world, Siemens in Australia and New Zealand has access to the expertise, research and development of our 475,000 colleagues in over 190 other countries. With a combined research and development budget of A$9 billion and over 10,000 invention reports in Financial Year 2007/08, we offer access to the world’s best solutions.

•

ET200 Profinet IP65/67 rated I/O system

•

ET200S distributed safety controller

•

WinCC V7 SCADA.

Drives technologies: •

Sinamics AC variable speed drives

•

H-compact AC HV motors

•

Perfect harmony HV variable speed drives.

Other Countries: Siemens Pacific Cluster is part of the Siemens global network of innovation, which operates in 190 countries throughout the world. The Pacific Cluster comprises of Australia, New Zealand, Papua New Guinea and the Pacific Islands.

Website:

www.siemens.com.au/mining Offices: QLD

Activity: Siemens is a diversified technology-based solutions provider specialising in the areas of water, energy, environment, healthcare, productivity, mobility, safety and security.

Address:

Phone:

Fax:

PO Box 235 RBH, BOWEN HILLS, QLD 4006

131 773

1300 651 280

Products:

Sika Australia Pty Ltd

Siemens has a dedicated portfolio for the mining, aggregates and cement industries encompassing a broad spectrum of solutions in:

Activity:

Process instrumentation and analytics technologies •

Level

•

Flow

•

Pressure

•

Positioning

•

Weighing

•

Process protection

•

Gas analytics.

Totally integrated automation systems •

Programmable logic controllers

•

Distributed control systems

•

SCADA

•

HMI

•

Industrial networks

•

Safety.

Drives technologies •

AC and DC drives

•

AC and DC motors

•

Mechanical gear boxes.

140 • MESCA MEMBERS DIRECTORY VOL 8

Established in Baar, Switzerland, in 1910, Sika is a globally active speciality chemical company supplying the construction, mining, resource and manufacturing industry (automotive, bus, truck, rail, marine, solar and wind energy). The company has a worldwide presence in 80 countries with 15,200 employees and annual sales of CHF 4 829 million in 2012. Sika entered the Australian market in 1976 as a member of the Sika Group of companies. With annual sales of AUS $130 million and 160 employees, the company now operates from offices in all major states with production facilities in Queensland, New South Wales, Victoria, Western Australia and South Australia. Concentrating its activities on construction chemicals, Sika strives for innovative solutions that make substantial contribution to sustainable development.

Products: •

Admixtures for shotcrete and fibrecrete, including accelerators, stabilisers, mix enhancers, high range water retarders and protective film.

•

Civil construction Products: including below grade waterproofing and sulphate acid resistant membranes, waterbars, injectable hoses and swellable profiles.

•

Macro-synthetic fibres, synthetic and steel fibres.

•

Cementitious and epoxy-based grouts, chemical anchoring systems.

MESCA SUPPLIERS Industry Buying Guide

•

Protective coatings for chemical and abrasion resistance.

•

Floor coatings and toppings for chemical, abrasion and impact resistance.

Skyreach Pty Ltd

•

Rigid and flexible structural bonding.

•

Joint sealing for high chemical resistance and fully trafficable areas.

Website:

•

Concrete remediation Products: including concrete repair, coatings and impregnations.

www.skyreach.com.au Offices: QLD

New Products: Resin injection based on cementitious, polyurethane and polyurea silicate technology for ground, rock and soil consolidation and water stopping.

Other Countries:

Address:

Phone:

PO Box 30, GEEBUNG, QLD 4034

07 3865 4545 07 3865 7755

Fax:

Sika is a global company operating from 80 countries.

Website:

SLADE Industries Pty Ltd

www.aus.sika.com

About:

Offices: Head Office – WA Address:

Phone:

Fax:

16 Modal Crescent, CANNING VALE, WA 6155

08 9456 3655 08 9456 3644

Silcar About: Silcar employs over 3000 people and provides site-based plant asset management and maintenance services to the mining, energy, manufacturing, power generation and the telecommunications sector.

Activity: Maximising the productivity of plant and people by reducing the cause and risks of plant losses.

Products: A comprehensive “toolbox” of plant asset management systems, reliability improvement methods, business-based diagnostic tools and maintenance knowledge systems.

Slade Industries is a multidiscipline construction, commissioning and maintenance service provider from management to field technicians. We have experience in the following industries: •

Power Generation

•

Mining

•

Oil and Gas

•

CSG

•

Water Treatment

•

Desalination

•

Wastewater.

Activity: Slade Industries has been operating continuously in Australia since 1975 (As IMS, then IECCS in 2010 and now Slade Industries), and has been a key member of many successful construction and commissioning projects, delivering only the highest levels of quality and integrity at all times. Slade Industries has offices on the Sunshine Coast as well as North Queensland, and we are also looking to open an office to support our projects in Western Australia.

Products: Construction, Commissioning and Maintenance Management.

Specialisation:

Multidiscipline Construction, Commissioning and Maintenance service provider.

The development and implementation of business-based asset management solutions and the capability to deliver safe, sustainable operational reliability.

Advanced automated database creation/support. (Currently aimed at commissioning but can be utilised on construction and maintenance. To be produced in 2013 after project successes in Western Australia).

Website:

Specialisation:

www.silcar.com.au

Specialists in process and control system pre-commissioning, commissioning and calibrations.

Offices: VIC Address:

Phone:

Fax:

25-37 03 9273 7600 03 9017 1424 Huntingdale Road, BURWOOD, VIC 3125

•

P&ID and schematic verification as-built mark-ups

•

Commissioning to procedures utilising quality documentation and NATA traceable test equipment

•

Multidiscipline QA/Q.

Website:

www.ieccs.com.au Offices: Head Office – QLD Address:

Phone:

57 Honeydew Place, NINDERRY, QLD 4561

1300 682 312

MESCA MEMBERS DIRECTORY VOL 8 • 141

MESCA SUPPLIERS Industry Buying Guide

SNC-Lavalin Australia Pty Ltd About: SNC-Lavalin (TSX: SNC) is one of the leading engineering and construction groups in the world, and a major player in the ownership of infrastructure and in the provision of operations and maintenance services. SNC-Lavalin has offices across Canada and in over 35 other countries around the world, and is currently working in some 100 countries.

Activity: We supply Engineering, Project Management, Procurement and Construction services. This also includes:

Activity: A Global Electrical and Instrumentation Construction Contractor with an industry focus specifically on Minerals and Metals, Oil and Gas, and related infrastructure.

Equipment: Full assets for E&I construction, including light vehicles, trucks, cranes and plant. The SCEE Group of Companies around the world has extensive company owned plant and equipment including our own conductor stringing machinery for specialised aerial installation.

Other Countries: Australia and New Zealand, Asia and Middle East, Americas and Africa

•

Environmental engineering

•

Mine planning engineering

Specialisation:

•

Geotechnical engineering

•

Hydrological engineering

Long range project mobilisation for Minerals and Metals, and Oil and Gas projects anywhere around the world.

•

Geomechanical engineering.

We provide a full suite of services, including scoping studies through to commissioning / decommissioning.

Website:

www.scee.com.au Offices: QLD

Other Countries: We operate in 35 countries worldwide.

Address:

Phone:

Fax:

Specialisation:

12 Trade Street, LYTTON, QLD 4178

07 3308 8900

07 3348 2095

SNC-Lavalin is one of the world’s leading engineering, procurement, construction and related technical services organisations, serving selected industry sectors and geographic markets. SNC-Lavalin achieves this through the know-how of its people, by contributing to the success of its clients through value-added services and by continuous investment in the improvement of its technical and managerial competence.

Southern Cross Engineering

Website:

The SCE Group is an experienced material handling provider and a Crushing and screening specialist. Our typical projects range from single equipment supply to full turnkey $30M+ EPCM work. Equipment supply includes screens, crushers, feeders and mobile plant / conveyors / reclaimers as well as full parts and service.

www.snc-lavalin.com Offices: QLD Address:

Phone:

Fax:

Level 12, 348 Edward Street, BRISBANE, QLD 4000

07 3002 1000 07 3221 2600

About:

We have two Australian offices, with manufacturing bases in New Zealand’s North and South Islands, which consist of separate machine, fitting and fabrications shops. We provide plant/process design, consultancy and budgetary pricing for CAPEX. SCE has experienced Project managers, Mechanical and Electrical engineers and a design office providing 2-D, 3-D and structural drawings. Our current staff level is 150 Engineers, Tradesmen and Project Managers.

Sound Control Pty Ltd Offices: QLD Address:

Phone:

216 Lavarack Avenue, HAMILTON CENTRAL, QLD 4007

07 3268 4588 07 3268 7996

Fax:

Southern Cross Electrical Engineering Limited About: Southern Cross Electrical Engineering (SCEE) was established in 1978 and, together with its Australian and overseas group of companies, is a dedicated provider of large-scale specialised electrical, control and instrumentation installation and testing services for major construction projects in Australia and throughout the world.

142 • MESCA MEMBERS DIRECTORY VOL 8

Activity: Design and Construction of materials handling solutions, including electrical. Heavy fabrication and low-cost centre construction. Manufacture of handling and mobile equipment.

Products: •

Apron Feeders

•

Screens

•

Belt Feeders

•

Chutes and hoppers with wear liners

•

Screen structures and structural steel

•

Load in and load out system

•

Conveyors

•

Overland conveyors

•

Mobile plant, crushers and screens

•

Low TPH Reclaimers

•

Design and Engineering.

Other Countries: New Zealand.

MESCA SUPPLIERS Industry Buying Guide

Specialisation: Materials handling solutions and equipment.

Website:

www.sceaust.com Offices: QLD Address:

Phone:

Unit 11, 50 Parker Court, PINKENBA, QLD 4008

07 3206 2275

Southern Queensland Steel About: Southern Steel is the largest privately owned Steel Distribution company in Australia. With over 50 years in the Steel Industry and 36 Branches throughout Australia, no job is too big or too small.

Products: Hot Rolled and Welded Sections, Merchant Bar, Tubulars, Plate, Sheet and Coil.

Equipment: NATIONAL PROCESSING CAPABILITIES Cut, Drill, Plate Cutting-Oxy/Plasma/Laser/Bevel/Drill, Form, Bend, Roll.

Website:

www.southernsteelgroup.com.au Offices: QLD Address:

Phone:

40-44 Maggiolo Drive, PAGET, QLD 4741

07 4998 5831 07 4998 5931

Fax:

Steinert Australia Pty Ltd About: Steinert draws on more than 120 years of innovation and ingenuity to Increase Production Yield, Improve Product Quality, Reduce Process Costs and Improve Process Efficiencies. We do this by offering Separation Technologies, including Heavy Media Recovery and Iron Ore Beneficiation, Mineral Processing, Upstream Upgrading of Feed Stock Ore and Tramp Material Detection and Removal Systems. Steinert also invests heavily in R&D through its parent, Steinert Elektromagnetbau GmbH, where we are currently engaged in improving recoveries of magnetite and applying sensor sorting to the mineral industry.

Activity: Steinert Australia is an Australian engineering company that specialises in the design, manufacture and repair of Magnetic Separation Equipment, Industrial Magnets and Sensor Sorting equipment. Our focus is on providing technical guidance and a wide selection of products to benefit Australia’s leading local and International Mining companies.

Products: •

Wet Low Intensity Magnetic Separators

•

Wet Medium Intensity Magnetic Separators

•

Wet High Intensity Magnetic Separators

•

Dry Deep Field Magnetic Drum Separators and Pulleys

326319A_Steinert_2065.indd 1 MESCA

MEMBERS DIRECTORY VOL 8 • 143 16/12/13 10:44 AM

MESCA SUPPLIERS Industry Buying Guide

Specialisation:

•

High Gradient Magnetic Separators

•

FSS – Colour Sorting Systems

•

ISS – Electromagnetic Induction Sorting Systems

•

XSS – X-ray Sorting Systems

•

NES – Non-Ferrous Metal Separators

•

High Gradient Magnetic Filters

www.stellarrecruitment.com

•

Overhead Electro and Permanent Magnets

•

Discriminating and Non-discriminating Metal Detectors.

Offices: QLD

Permanent and temporary recruitment solutions for the resources and infrastructure sectors.

Website:

New Products: Ore – Sensor Sorting Systems Non-ferrous Tramp Removal Systems.

Address:

Phone:

Fax:

Level 21, 144 Edward Street, BRISBANE, QLD 4000

07 3009 9629

07 3211 8088

Other Countries: Germany (Cologne) and Europe; USA (Illinois and Florida); Brazil (Belo Horizonte); Japan; South Africa (Agent); India (Agent); China (Agent); Indonesia (Agent).

Sullair Australia Pty Ltd About:

Specialisation: Separation Technologies using sensor sorting and electromagnetic principles.

Website:

Sullair Australia is Australia’s largest manufacturer of rotary screw air compressors, with all of our industrial range designed, engineered and manufactured in our production facility in Melbourne. Designing in Australia lets us manufacture compressors perfect for our customers’ needs – hard working, reliable and tough. Loyalty is important to Sullair, and we closely collaborate with many of our customers to reduce energy usage, develop and refine applications for our range, and decrease manufacturing costs around their plant.

www.steinert.com.au Offices: VIC Address:

Phone:

PO Box 335, BAYSWATER, VIC 3153

03 8720 0800 03 8720 0888

Fax:

Stellar Recruitment About: What began as an enterprising idea by three passionate people in 2006 has extended to a global network of high-calibre, likeminded and skilled individuals taking the Stellar spirit and organisation forward.

Activity: Stellar has a global recruitment network operating an innovative and progressive business in the Resources and Infrastructure industries. Our people are dynamic. They tailor solutions and nurture effective, long-term partnerships that enable our jobseekers and employers to excel. That’s the Stellar difference.

ISO 9001:2008 certified, Sullair’s depth of local engineering support uniquely positions the company to design products for Australia’s hot, humid and harsh conditions, and customise compressed air solutions from the ground up to meet exact customer specifications faster. Sullair Australia products are available to you through a network of more than 22 locations Australia-wide, giving our customers the security of reliable 24/7 support and the availability of spares at short notice no matter where they are located.

Activity: ISO9001 design, manufacture, supply and service of electrical, industrial and diesel driven air compressors.

Products: •

Rotary Screw Air Compressors

•

Piston Reciprocating Air Compressors

•

Air Receivers

•

Water chillers

•

Vacuum systems

•

Plus a wide range of associated ancillary equipment.

Products:

Website:

Permanent Recruitment Solutions:

www.sullair.com.au

Stellar Recruitment’s partnership model promotes a consultative and relationship-driven service that acts as an extension to your own internal recruitment capabilities. It enables us to consistently introduce the right people and subsequently provide outstanding solutions that allow your business to attract the world’s best talent. Temporary Recruitment Solutions: Stellar is a leading provider of professional and innovative labour hire or contract recruitment. Whether your business requires professional staff on a temporary basis or simply prefers the flexibility of labour hire, we can find the right candidate for your needs. We take care of the entire payroll process, including payment of superannuation, taxes, administration and insurances.

Other Countries: New Zealand, United States.

144 • MESCA MEMBERS DIRECTORY VOL 8

Offices: QLD Address:

Phone:

30 Woomera Place, ARCHERFIELD, QLD 4108

1300 266 773

MESCA SUPPLIERS Industry Buying Guide

Sumitomo Drive Technologies About: Ever since it first went on sale in 1939, the Cyclo® Drive has been highly evaluated by customers for its strength and reliability. The secret to this product is its unique gear teeth and mechanism. As a cycloidal tooth profile in the inner gear and a epitrochoidal prarallel curve in the outer gear has been adopted, the gear engagement ratio is very high to eliminate the risk of tooth breakage and greatly raising the reliability of the reducer. Furthermore, high carbon and chromium bearing steel noted for their heat and fatigue resisting properties have been used .The Sumitomo-unique mechanism offers high reduction ratios of 1/6 to 1/119 for the single stage type and 1/121 to 1/7569 for the double stage type, making the drives much more compact than when normal involutegears are used. The very high reduction ratio of 1/9251 to 1/658503 for the three-stage type, impossible with normal involutegears, can be achieved easily with this mechanism. In addition to the characteristics of the Cyclo® Drive mechanism, the greater load capacity of the 6000 series offers up to 40 per cent more size reduction. Elasticity analysis and development of a new tooth profile has helped to further reduce noise. The BEVEL BUDDY BOX®, with right-angle shaft, and HELICAL BUDDY BOX®, with parallel shaft, are designed to take advantage of the superior characteristics of this Cyclo® gear mechanism by using bevel gears and helical gears for the output stage. These two product lineups make Cyclo® drives even easier to use. Sumitomo Heavy Industries also provides an extensive line of mediumand large-sized speed reducers. Two types of speed reducers are provided for the Paramax® series. One is a parallel gearbox with helical gears and the other combines helical gears and bevel gears in a right-angle gearbox. Systematic combinations of individual components has led to standardisation of almost all gears, shafts and cases. This makes both higher quality and shorter delivery times possible for speed reducers. Compared with the ordinary pressure angle of 20°, a 25° pressure angle offers tooth form with thicker dedendum. This provides the higher tooth strength rating that is essential for shock load applications. FEM analysis is used to maximise housing strength and rigidity, thereby ensuring correct gear alignment and noise reduction. The new 9000 series right-angle models allow direct motor Mting. This eliminates the need for coupling and simplifies motor installation, enabling more compact design. The HEDCON® worm gear speed reducer is based on the unique dual contact theory, which creates a high-efficiency, high-strength worm reduction mechanism. A highprecision series featuring low backlash is also available. The COMPOWER® model’s planetary gear utilises a unique isosteric mechanism combined with high-precision carburised ground gears. The result is a compact and powerful planetary gear speed reducer. This series includes the very large 75,000kgf.m class model.

Activity: Sales – Service – Assembly – Design – Engineering Strategic alliance Partner.

Products: Sumitomo Cyclo Drive, Buddy Box, Hyponic Drive, ParamaxHelical and Bevel Helical, Seisa GearHelical and Planetary, Seisa Coupling, Ueda Gear.

New Products: Seisa Gear and Rigid Couplings 25 sizes from 17 mm bore thru 900mm / 6460kNm Stocked to 280mm / 250kNm.

Other Countries: Sumitomo Machinery Corporation of America (SMA) Headquarters: Chesapeake Address: 4200 Holland Blvd. Chesapeake, VA 23323Tel: (1) 757485-3355 Fax: (1) 757-487-3193 Time Difference GMT-5SMA Branch Chicago Office Address: 175 West Lake Drive, Glendale Heights, IL 60139.

Offices: QLD Address:

Phone:

Unit 11, 20 Archerfield Road, DARRA, QLD 4076

07 3853 3800 07 3375 1000

Fax:

Svendborg Brakes A/S About: Svendborg Brakes is the leading and most innovative manufacturer of hydraulic braking systems for heavy industry in the world, including: wind power, mining, cranes, ship propulsion and offshore. We employ technological expertise, market intelligence and highly competent personnel to fulfil customer requirements for reliable, costeffective and intelligent braking systems. Furthermore, our braking solutions are customised to precisely match the customer’s requirements and applications. Solutions in which hydraulics, electronics and advanced brake engineering are combined, as brakes have to operate when other parts have failed – when lives are at stake.

Activity: Providing leading brake systems to the Australian mining industry.

Products: Disc brakes, Brake control units, SOBO.

New Products: 100 series brake.

Other Countries: Denmark; USA; Germany; South Africa; China; Chile.

Specialisation: Braking Systems for Belt Conveyors, Winches including for Shiploaders and Take-up, Draw-works, Mine Winders, Reclaimers, Stackers and Bucket Wheel Excavators.

Website:

www.svendborg-brakes.com Offices: WA Address:

Phone:

118 Burswood Road, BURSWOOD, WA 6100

08 9416 0300

Sylvania Lighting Australia Pty Ltd Offices: QLD Address:

Phone:

25 Donkin Street, WEST END, QLD 4101

07 3034 8600 07 3846 3689

Fax:

Website:

www.sumitomo-drive.com.au

MESCA MEMBERS DIRECTORY VOL 8 • 145

MESCA SUPPLIERS Industry Buying Guide

Syntechtron Pty Ltd Offices: NSW Address:

Phone:

17 Butterfield Street, BLACKTOWN, NSW 2148

02 9679 7022 02 9679 7033

Fax:

Other Countries: Technofast Industries has nominated Distributors throughout Australia. In addition, we have several International Distributors working on our behalf. Such locations include Japan, China, Korea, Indonesia, USA and Europe.

Specialisation: Hydraulic Tensioning Devices and Bolt Tensioning Systems.

Website:

www.technofast.com

Takraf Australia Pty Ltd Offices: QLD Address:

Phone:

Fax:

Level 3, 40 07 3124 9080 07 3124 9079 McDougall Street, MILTON, QLD 4064

Taylor Rail Australia Pty Ltd Offices: NSW Address:

Phone:

10 Luso Drive, UNANDERRA, NSW 2526

02 4272 1586 02 4272 1576

Fax:

Technofast Industries Pty Ltd About: Technofast Industries have been providing innovative solutions to hydraulic bolting and tensioning problems since the late 1980s. To date, Technofast Industries continue to provide and develop a wide range of products and services designed to make hydraulic tensioning both affordable and practical.

Activity:

Offices: QLD Address:

Phone:

PO Box 3239, DARRA, QLD 4076

07 3375 1431 07 3375 9094

Fax:

Terex Jaques Offices: VIC Address:

Phone:

PO Box 1525, CLAYTON, VIC 3169

03 9647 9300 03 8551 9310

Fax:

Tex Onsite Pty Ltd About: Tex Onsite provides a genuine ON-SITE Test, Inspect and Instrument Calibration service with around 30 service vans on the road and 5 airplanes servicing remote sites throughout Australia. This wide geographical on-site coverage is exceptional in Australia. Typically, Tex Onsite services industries such as mining, gas, electricity supply industry, generation, electrical contracting, manufacturing, construction, shipping, rail and much more.

Technofast Industries, innovation specialists within the Engineering Industry, offer a vast selection of standardised and customised hydraulic bolt tensioning and hydraulic tensioning systems. All systems are designed, developed and manufactured to Order in Brisbane QLD.

Tex Onsite’s product range incorporates instrument calibration and repair covering electrical, torque, dimensional, pressure, temperature, flow, survey equipment etc. The test and inspection service includes a high-end full Power System Protection Service, HV safety and operational tools and equipment, lifting gear, safety equipment, height safety and fall arrest.

Products:

Website:

Technofast Industries have a vast Product Base which includes (not limited to):

www.texon-site.com.au

•

EziTite Hydraulic Nuts

•

EziTite Hydraulic Bolts

•

EziTite Hydraulic Clamp Nuts

•

EziTite EziJac (Hydraulic Bolt Tensioners; available in multiple designs)

•

Push Pull Cylinders

•

Lifting Jacks, and much more!

Technofast Industries, given the required specifications, can assist you in creating a one-off tool best suited for your Application.

New Products: Technofast Industries continues to improve and review its products on an ongoing basis. This ensures all Distributors and End Customers receive the very latest in tensioning technology, providing them with the added benefits of maximum productivity, maximum return and minimal risk of injury on their sites.

146 • MESCA MEMBERS DIRECTORY VOL 8

Offices: VIC Address:

Phone:

28 Corporate Boulevard, BAYSWATER, VIC 3153

1300 785 935

Email: sales@texonsite.com.au

MESCA SUPPLIERS Industry Buying Guide

Thiess Construction Pty Ltd About: Over the past 75 years, Thiess has played a pivotal role in promoting Australia’s resources sector and furthering infrastructure development. Our geographic and market diversity gives our business a broad base and inherent strength. We deliver our services through our operating divisions, subsidiaries, alliances and joint ventures. Thiess employs more than 16,000 people across approximately 230 projects. Delivering projects above the expectations of our clients, and finding innovative ways to minimise community and environmental impacts, are central to our project delivery methods. At Thiess, we understand that sustainability is about more than maintaining a healthy balance sheet – it is part of everything we do.

Activity: Thiess’ operating divisions deliver services across a diverse range of disciplines, including mining, civil, building, industrial projects, rail, services and tunnelling.

Products: Industrial Projects By combining its engineering, procurement and construction expertise with extensive project management experience, Thiess Industrial Projects is able to deliver first-class solutions covering areas including resources, LNG, water and wastewater, and power. Mining Thiess is the world’s largest supplier of outsourced mining services. As a full service provider, we offer total mining solutions.

Services Thiess Services is a wholly owned subsidiary of Thiess, offering versatile, innovative and diverse environmental and utilities contracting services. Tunnelling We are one of Australia’s most experienced tunnelling contractors, with a strong history of introducing new techniques to meet some of the most challenging project requirements. Rail Thiess is committed to the future of the rail industry. In 2008, we combined our broad rail capabilities and successful rail maintenance business into a single Thiess Rail division, allowing us to offer clients a full suite of expertise on new and complex programs. Building Thiess is one of Australia’s largest design and construction management companies with a record of delivering complex building projects in niche markets on time and on budget.

New Products: Thiess was recently contracted to construct the Site Preparation and Temporary Facilities, and the $500m Construction Village for the Gorgon Project on Barrow Island.

Equipment: Our plant fleet has a replacement value of approximately $2 billion. It is one of the most diverse fleets of mining and construction plant in Australasia. The fleet is maintained in-house for optimum efficiency and performance, and as one of the world’s largest and most advanced plant fleets, it allows us to undertake projects of any scale.

Civil We are delivering a diverse range of multidisciplinary civil projects that are revitalising communities and providing the vital infrastructure to help them grow.

THE EXPERTS COME TO YOU HV Testing Power System Protection Height Safety Lifting Equipment

Instrument Calibrations Including- Electrical, Torque, Dimensional, Pressure, Flow

MOBILE TESTING & CALIBRATION SERVICES ONSITE SERVICE CAPABILITIES AUSTRALIA WIDE 317889A_Tex Onsite | 2065.indd 1

CONTACT 1300 785 935 www.texonsite.com.au 11/11/13 11:01 AM

MESCA MEMBERS DIRECTORY VOL 8 • 147

MESCA SUPPLIERS Industry Buying Guide

Other Countries: Thiess has diverse operations throughout Australia, New Zealand, Indonesia, India and the United Arab Emirates. We have had a significant presence in Indonesia for more than 20 years, and currently operate five large coal mining projects in the country.

Specialisation: Through our mining, civil, services, industrial projects, tunnelling, rail and building expertise, we are able to manage every operational aspect of a project. As a result complex, multidisciplined projects are delivered with single point accountability.

Thomas & Coffey Limited About: Thomas & Coffey (formerly Cordukes Ltd) is an integrated industrial services provider operating in the fields of construction, engineering, and asset maintenance. The company focuses on delivering services to very high standards, utilising skilled and well-supervised people, supported by comprehensive management systems and ongoing training. Thomas & Coffey has 16 branches located in key commercial, industrial and mining centres throughout Australia from which their 1200 strong workforce operate.

Activity:

Website:

The company’s principal activities are:

www.thiess.com.au Offices: QLD Address:

Phone:

179 Grey Street, SOUTH BANK, QLD 4101

07 3002 9000

•

Building projects covering new facilities, refurbishments, and extensions

•

Engineering projects covering production facilities, infrastructure and equipment installations

•

Industrial trade services covering maintenance, repairs, overhauls, fabrication and engineering

•

Facilities maintenance covering carpentry, electrical, plumbing, airconditioning and fire.

Products:

Thomas & Betts

•

Construction and engineering project delivery

About:

•

Mechanical, electrical and building maintenance services.

From emergency lighting found in every commercial building, to electrical connections in underground mines to equipment wiring in robotic production plants, our products can be found everywhere you find electricity.

•

Asbestos removal and rectification

•

Custom-designed prefabricated buildings.

New Products:

We can offer one of the broadest product lines in the industry supplying items used in typical electrical applications – be it industrial or commercial construction, equipment maintenance and repair or original equipment manufacturing.

Specialisation:

Activity:

Website:

Thomas & Betts has a proven record in the manufacture and supply of highquality electrical products and components across all industry sectors.

www.thomascoffey.com.au

Specialist knowledge and experience in the coal, aluminium, steel, defence, utilities (water and power) education and healthcare sectors

Offices: NSW

Products: Conduit Systems, Metal Glands, Nylon Glands, Cable Ties, Lightning Protection, Earthing, Heatshrink, Cable Tray,Lugs, Earth Tape, Earth Rods, Hazardous Area Lighting, Hazardous Area Junction Boxes, Hazardous Area Control Stations.

Specialisation: Thomas & Betts is a global corporation that specialises in the manufacture of high-quality products suited for a number of different sectors within the Electrical Industry.

Website:

www.tnb.ca/aus/ Offices: QLD Address:

Phone:

26 Turbo Drive, COORPAROO, QLD 4151

1300 666 595 1300 666 594

Fax:

Address:

Phone:

1 Figtree Drive, HOMEBUSH BAY, NSW 2127

02 9008 2000 02 9008 2199

TOLL Group About: Toll offers a total integrated logistics solution to the mining industry. The intent of the business is to provide discrete and integrated services where required across the inbound/outbound and on-site service segments of the mining logistics chain. Our experience and expert capabilities in designing and implementing innovative supply chain solutions are demonstrated through our ongoing commitment to our clients, and the extensive client base that we service.

Activity: Toll’s key business strength and competitive advantage is our ability to design, implement and manage innovative supply chain solutions, which provide our customers with flexibility, reliability and cost competitiveness in managing their complex logistics requirements. By providing tailored solutions to meet the client’s specific site requirements, our operations are seamlessly integrated into our client’s operations.

Products: Equipment.

148 • MESCA MEMBERS DIRECTORY VOL 8

Fax:

ELECTRICAL SOLUTIONS FOR THE METAL & MINING INDUSTRY Thomas & Betts understand the challenges faced in the metals and mining industry. With the industry’s most efficient distribution system, we’re prepared to meet your ongoing operational needs as well as serve new OEM and construction investments.

Our Value Commitment

Thomas & Betts is committed to helping you meet the unique challenges with electrical solutions that need to operate reliably in harsh conditions to meet high demands that need to deliver value. These include: T&B Engineered Solutions: Our products are designed to perform dependably during continuous operation, in wet or submerged areas, hazardous area environments and around high-vibration equipment. They also withstand harsh chemicals and extreme temperatures. Tested Reliability: Our products are rigorously tested for use in highly corrosive environments, with proven results in thousands of installations. Expert Support: Thomas & Betts trained sales representatives and technical experts are available at every stage of a project, from planning and site preparation through construction and MRO. Product Availability: Our industry-leading distributor network assures you of reliable and on-time delivery. This global electrical product support system ensures that our solutions are available when and where you need them.

Safety Technology

Emergency Lighting: For more than 30 years, Stanilite® has been the emergency and lighting industry innovator, pioneering products such as our Quickfit™ slide connect Exit, the Spitfire® recessed emergency light, Nexus® evacuation lighting monitoring systems in both cabled and RF variants and our long-life Lumatec Cold Cathode lamp technology. The incorporation of LED technology into our range, along with our renowned product quality continues our legacy of innovation and drive to provide the market with energy efficient solutions. Stanilite® is regularly specified as the evacuation lighting product of choice and can be seen in a vast array of

major buildings nationally. Stanilite® has the resources to provide solutions from concept to design assistance to manufacture of products. Stanilite® also has a Field Service team to guide through the monitored systems as well as conduct audits and testing. Lightning Protection and Earthing: With our well known global brands - Furse®, Blackburn®, Color-Keyed® and Homac® - T&B Australia are able to offer complete solutions including design assistance. Products include Air Rods, Copper Tape, Compression Connectors, Exothermic Welding, Earth Braids, Earth Pits, Earth Rods, Clamps and all other associated earthing products. Fans and Ventilation: Manrose® ventilation and extraction products include a diverse range of fan types and sizes, fittings and accessories. The range offers complete high quality solutions for both red for commercial and residential air movement applications.

Wire & Cable Management

Cable Glands: The Nicote® brand provides for standard cable gland termination solutions for circular and armoured cables from standard indoor to hazardous area environments. Thomas & Betts can also provide cable glands that suit Canadian or American armoured cables. Fastenings: Since inventing the cable tie in 1958, Thomas & Betts has continually improved the product offering, utilising various different materials to find the best fit cable tie to suit your application. Insulation: Thomas & Betts provide a comprehensive range of Heatshrink products.

The range includes; standard Thin Wall; Thin, Medium and Heavy Wall Glue Lined lengths; 2-5 Core Break Outs; End Caps and Zipper Repair Tubes. Flexible Conduits: Thomas & Betts have multiple different product offerings for the protection of cables. Adaptaflex® is one of the global leaders in conduit manufacture, with more than 6000 metallic and nonmetallic products there is a solution for every application. Hazardous Area Flexible Conduits: Kopex-Ex® manufactures conduit system solutions for hazardous areas, with IECEx Ex e and Ex d certified products.

Power Connection & Control

Underground Distribution: Thomas & Betts is the manufacturer of the trusted Elastimold® brand of separable connector system. Products include Elastimold® ANSI and DIN connectors and cable accessories, Homac® flood seal connectors, Hi-Tech® fuse products and Molded Vacuum switches and gas free switchgear. Overhead Distribution: A market leading range of overhead distribution accessories from Homac® and Blackburn® that reduce total installation costs. Overhead Apparatus: Thomas & Betts manufacture a range of smart-grid ready products that improve power quality and reliability, these include Reclosers from Elastimold® and Joslyn Hi-Voltage®, Fisher Pierce® Indicators Sensors and Controls and high duty cycle, gas free Capacitor and Reactor Switches by Joslyn Hi-Voltage®.

For more information on Thomas & Betts, please contact our National Customer Service Centre on: Phone: 1300 666 595 Fax: 1300 666 594 Email: austsales@tnb.com Website: www.tnbaust.com

MESCA SUPPLIERS Industry Buying Guide

Other Countries:

•

Bridgework, Girders and Railings

Toll is the Asian region’s leading provider of integrated logistics, generating an annual revenue of AU$8.7 billion and operating an extensive network of over 1,200 sites in 55 countries.

•

Calciner Kilns

•

City Water Supply Filtration System Refurbishments

•

Chimney Stacks for Industrial Plants

Specialisation:

•

Coal Loaders

On-site provider of logistical services to the mining industry in remote locations throughout Australia and the world.

•

Concrete Slabs and Structures

•

Conveyors Systems

Website:

•

Duct Work for Exhaust Gases, Heaters, Air Intakes

•

Dust Precipitators

•

Erection and Commissioning of Mechanical and Electrical Components

•

Exhaust Gas Ducts and Chimney Stacks

•

Gantry and Overhead Cranes

•

General Steelwork Fabrications

•

Grizzlys for Mining and Quarrying

•

Industrial Blasting and Painting

•

Jobbing Shop Services

•

Dryer Kiln Girth Gears

Townsville Engineering Industries Pty Ltd

•

Dryer Kiln Tyres and Trunnion Rollers

•

Marine wharf and jetty pylons and caps

•

Ore Process Clarifiers

•

Ore Process Thickeners

About:

•

Pipe Racking

Since incorporation in 1968, Townsville Engineering Industries Pty Ltd (TEi) has grown to meet specialist requirements in the engineering sector, and is the largest privately owned multidiscipline engineering company in Northern Australia. We specialise in engineering and construction services, delivering quality assured engineering support services to the Construction, Sugar, Mining, Mineral Refining and Marine industries in Australia and Overseas.

•

Pipework for Oil /Water /Gas systems

•

Platework for Bins/ Hoppers

•

Pressure Vessels

•

Process Economisers

•

Pump installations

•

Road and Earth Work Bench for Town Water Reservoirs

Our capabilities cover design, civil works, medium to heavy steelwork fabrication and specialised heavy machining. We value partnerships and build on relationships providing quality outcomes for our clients.

•

Roofing and Sheeting Installations

•

Self Bunded Containers

•

Ship Loading Chutes and Structures

•

Shutdown work

•

Specialised Welding

•

Steel Construction for Warehouses

•

Steel Trommel Screens

•

Structural Steel Fabrication

•

Structures for Circulating Water

•

Structures for Oil/ Gas/ Coal Supply

•

Structures for Power Transmission and Auxiliary Power Supply

•

Tankage and Tank Farms for Bulk Liquids for Fuel/ Oil/ Water

•

Train Unloading Hoppers and Structures

•

Vibrating Screens

•

Water Reservoirs for Town Water Supply

•

Wharf piles, Jetty Pile Caps, Jetty Structures.

www.tollgroup.com Offices: QLD Address:

Phone:

Fax:

Level 12, 145 Eagle Street, BRISBANE, QLD 4000

07 3295 1839 07 3295 1822

TEi has an extensive international client base mainly for the supply of Ball and SAG Mill trommels, and a strong domestic presence in industrial construction associated with the resources industry. Our brand is known for its unquestioned commitment to quality delivered products. This has built success in the production of a broad range of steelwork manufacture and project construction. With sound engineering and construction services, TEi is a partner to build and commission projects as Tier 1 and 2 contractors. Throughout our 43 years of history, we have continuously upgraded our production capacity and improved quality outcomes across our business. We comply with international and Australian Standards and client defined specifications. By this capability, we effectively compete in the global markets where quality and commitment are prerequisites.

Activity: •

Project Management

•

Design Engineering

•

Manufacturing Steelwork Engineering

•

Manufacturing Mechanical Engineering

Equipment:

Civil Construction Engineering

•

1000T Scalen Press

•

Field Maintenance Specialists

•

CNC Milling Machines

•

Steel Trommel Manufacturing

•

CNC Lathes

•

Self Bunded Container Manufacturing.

•

Vertical Union Borer

•

Waterjet Cutter

•

Plate Rollers

•

Oxy acetylene plate profile cutter

•

Noble and Lund Planomill

•

1 x horizontal borer

•

1 x VDF heavy-duty lathe 2T capacity

•

1 x Elgamill

•

1 x gear cutting planer

•

Products: •

Air Intake Ducts Flue Gas Ducts

•

Azimuth Bearings

•

Ball Mill Refurbishments

•

Bulk Earth Works for New Roads

•

Bulk Earth Works for City Water Supply Reservoirs

•

Bridge and Ducting Structures

150 • MESCA MEMBERS DIRECTORY VOL 8

MESCA SUPPLIERS Industry Buying Guide

•

1 x large keyway slotter

•

Vertical and horizontal heavy-duty plate rollers

TR7 Pty Ltd

•

Section roller (roundo)

•

2 x metal punches

Activity:

•

Beam line with band saws

•

Mobile compressor with blasting and painting equipment 1

•

Portable Gen set 100kva 1

•

TR7 Pty Ltd

Portable welders 400amps 3

•

TR7 Training Services Pty Ltd (RTO)

Large Pedestal Drill 1.

•

TR7 HealthCare Pty Ltd.

• •

OVERHEAD CRANES •

1 x 35T Heavy Lift Bay with 6.5T jockey

•

1 x 16T Heavy Lift Bay with 5T jockey

•

1 x 20T Plate Shop

•

1 x 10T Plate Shop

•

2 x 5T Beam Shop

•

1 x 5T Machine Shop.

The TR7 Group consists of a number of companies providing a range of Human Resource Services. The founding Company, TR7 Pty Ltd, commenced operation on 9 July 2003. The group of companies includes:

Products: Recruitment, Labour Hire, Shutdown Maintenance, Project Management, Indigenous Employment and Training, Medical Assessment Services, Human Resource Management, Safety Management.

Specialisation: TR7 Pty Ltd is dedicated to recognising, understanding, acknowledging and promoting cultural diversity and reconciliation in the workplace and community through sustainable employment for Australian Indigenous people. This involves engaging a holistic approach with the local community, schools, health services, shires, businesses and industry throughout Australia.

PLANT •

12T Linmac Mobile Crane 1

•

14T Franna Mobile Crane 1

•

80T Liebherr Mobile Crane 1

•

8T BHB Mobile Crane 1

•

Dual Cab Trucks 2

•

Kenworth Prime Mover 1

•

Drop Deck Trailer 1

•

Ford Prime Mover 1

•

Freighter Semi Trailer 1

•

Dog Trailer 1

•

1T Forklift 1

•

4T Forklift 1

Website:

•

Caterpillar Excavators x 3

•

Boom Lift x 2

www.tr7.com.au

•

Sizzor Lift/EWP x 1.

Our Indigenous Employment and Training Project Model, with a target of twelve (12) months plus in sustainable employment, is undertaken on a project basis with the employer. We achieve this by utilising the Five (5) Key Elements as per the following. 1. Identifying specific jobs first 2. Cultural awareness, obligations and responsibility 3. Job readiness and cultural obligations and responsibility training 4. Mentoring by Indigenous persons 5. Outcomes and retention rates.

Offices: WA

Specialisation: Ball and SAG Trommels Specifically, we design and construct application-specific steel trommels for the hard rock, gold mining and quarry industries. The units are lightweight, fully disposable, fully welded one piece construction and are manufactured to withstand arduous working conditions. Benefits include cost-effective, more tonnes throughput per dollar spend, long wear life reducing change out times, can be retrofitted, rapid changeover and minimal plant downtime. Designed in close consultation with client and design authentication to include site-specific designs and changing conditions. Variable sizes, no monitoring for fatigue and cracking and can be shipped worldwide.

Website:

Address:

Phone:

312 Selby Street, OSBORNE PARK, WA 6017

08 9218 1444 08 9218 1445

Fax:

Transfield Services Limited About: Transfield Services delivers asset management services globally across the resources, energy, industrial, infrastructure, property and defence sectors.

Activity:

www.tei.com.au Offices: QLD Address:

Phone:

PO Box 7662, GARBUTT, QLD 4814

07 4774 5811 07 4774 5748

Fax:

Our services across the asset management life cycle include consulting, engineering, construction, operations, maintenance and upgrades. This integrated approach ensures clients benefit with business outcomes that optimise the sustainable performance, integrity and output of their assets.

Other Countries: We have activities across Australia, New Zealand, Nauru, New Caledonia, the United States, Canada, Chile, India, Qatar, the Philippines and the United Arab Emirates.

Website:

www.transfieldservices.com

MESCA MEMBERS DIRECTORY VOL 8 • 151

MESCA SUPPLIERS Industry Buying Guide

Offices: NSW

POWER TRANSMISSION •

Cam Clutch

•

Back Stop

•

Power Cylinders

•

Lini Power Jacks

•

Couplings

•

Power Locks

Transpacific Industries Pty Ltd

•

Gear and Hypoid motors

•

Disco Variable Speed Drives

Offices: WA

•

Helical Power Drives

•

Reducers

•

Shock Dampers

•

Torque Limiter

•

Torque Guard

•

Torque Keeper

•

Shock Relay

•

Shock Monitor.

Address:

Phone:

Fax:

Level 10, 111 Pacific Highway, NORTH SYDNEY, NSW 2059

02 9464 1000 02 9464 1111

Address:

Phone:

Fax:

171 Camboon Road, MALAGA, WA 6945

08 9449 3333 08 9449 3393

Trelleborg Engineered Systems Australia Pty Ltd

KabelSchlepp – Cable Carrier chains.

Other Countries:

Offices: WA Address:

New Products:

Phone:

Fax:

25 Glassford Road, 08 9256 6002 08 9353 5990 KEWDALE, WA 6105

Trimcast Products Pty Ltd Offices: VIC Address:

Phone:

2 Forbes Close, KNOXFIELD, VIC 3180

03 9765 1500 03 9765 1500

Fax:

Tsubaki Australia Pty Ltd About: Tsubaki Australia has offices in Sydney, Brisbane, Melbourne and Perth servicing all facets of mining and industry with quality chain and power transmission products.

Activity: Tsubaki are Manufacturers and Suppliers of Chain and Power Transmission products.

Products: CHAIN •

Drive Chain

•

Conveyor Chain

•

RS Roller Chain

•

Shuttle Car Chain

•

Drill Rig Chain

•

Rotary Breaker Chain

•

Feeder Breaker Chain

•

Reclaimer Chain

•

Sprockets

•

Conveyor Components

•

Bearing Rollers.

152 • MESCA MEMBERS DIRECTORY VOL 8

Sales offices and manufacturing plants worldwide.

Specialisation: Providing technical and engineering support to design engineers and consultants for new plant design, new equipment and improving efficiencies with existing equipment/plant.

Website:

www.tsubaki.com.au Offices: QLD Address:

Phone:

Unit 4, 19 Murdoch Circuit, ACACIA RIDGE, QLD 4110

07 3273 0600 07 3273 6868

Fax:

UHY Haines Norton About: Through our membership of UHY International and our Australian and New Zealand Association, we are able to provide an alternative to the Big 4, which is attractive to many businesses in the Resources, Energy, and Oil and Gas sectors. We provide a first-class service by first-class professionals.

Activity: Chartered Accountants with specialist knowledge in providing services to the Resources, Energy, and Oil and Gas sectors.

Products: Business advisory, tax, accounting, R&D and audit services for mining companies and those providing services to the mining and resource industry. Business structuring advice for new arrivals into Australia (international tax and migration expertise). We have dual trained (UK and Australia tax specialists) in our office and have, through our membership of UHY International, an international tax capability. With qualified migration agents in our practice, we know about visa requirements and the commercial and taxation issues that flow. PCAOB registered, we can undertake Audits for US-based entities with interests in Australia.

MESCA SUPPLIERS Industry Buying Guide

Other Countries:

Specialisation:

80 countries throughout the world – visit www.uhy.com

Treat oily water and remove solids from waste streams, no need for chemicals. Water can be re-used and recycled.

Specialisation: Business migration

Website:

International taxation and structuring

www.ultraspin.com.au

R&D.

Offices: VIC

Website:

www.uhyhnperth.com.au Offices: WA Address:

Phone:

16 Lakeside Corporate, 24 Parkland Road, OSBORNE PARK, WA 6017

08 9444 3400 08 9444 3430

Fax:

Ultraspin Technology About: Our equipment is located on Greenfield sites or retrofit to existing sites. Can be used up-front of DAF, M/filtration or U/filtration and RO plants to remove free oils and emulsified oils.

Activity: A small high-tech Australian engineering and manufacturing company based in Mitcham, Victoria. We were previously known as Spinifex. We have been involved in oily water treatment separator systems since 1983. We provide innovative new ways to treat water containing oil, fat and grease.

Address:

Phone:

46 Wadhurst Drive, BORONIA, VIC 3155

03 9800 1100 03 9800 1661

United Fasteners About: United Fasteners was established in 2001. United Fasteners is the largest privately owned fastener company in Australia. Total inventory in excess of $15 million. United Fasteners has six branches – Adelaide, Brisbane, Gladstone, Mackay, Melbourne and Perth.

Activity: National distributor of Industrial/Construction Fasteners and Engineering Supplies.

Products: •

Fasteners

•

Stud Bolts

•

Structural Bolts

Products:

•

Masonry Anchors

Our products include oil skimmers, oily water separators in size from 2000 Litres per hour to over 11,000 Litres per hour.

•

Abrasives

•

Cutting Tools

On Mine sites the equipment is used for:

•

Lubricants

•

Light and Heavy Vehicle Wash Areas

•

Sealants

•

Fuel Bunded areas

•

Allied Products.

•

Maintenance Workshops.

The clean water can be: •

Recycled in vehicle wash bays

•

Used for dust suppression

•

Used for mine drill water.

New Products: We have self-bunded platforms and can mount equipment in containers and skids to reduce concrete platforms.

Equipment: How does it work? Oily water is pumped into the hydrocyclone, creating over 1000 times the force of gravity. There are no moving parts and the separator requires no cleaning or maintenance. We have patents on the Liquid-Liquid separation technology.

Other Countries:

Fax:

Specialisation: Extensive Fastener Range and stock availability Technical Support – Chartered Engineer Innovative Vendor Inventory Management Systems High Level of Customer Service.

Website:

www.unitedfasteners.com.au Offices: NSW Address:

Phone:

Suite 503, 45 Lime Street, SYDNEY, NSW 2000

02 9262 2250 02 9262 2470

Fax:

Our clients include mining and oil companies, food companies, power authorities, construction companies and government bodies, and over 750 units built and sold to clients in Australia, South Africa, UK and USA and Canada.

MESCA MEMBERS DIRECTORY VOL 8 • 153

MESCA SUPPLIERS Industry Buying Guide

Vantaz Group Australia Pty Ltd About: Vantaz is an international consulting firm, focused on delivering specific business services and solutions to our corporate clients. Vantaz has more than twelve years’ experience in mining, resource and utility industries in South America, and five years’ experience in Australia. Our staff consists of over 100 highly skilled consultants and managers strongly committed to providing personalised and practical solutions to people, process and technology. Vantaz consultants work closely with our clients to build effective working relationships and to ensure quick and flexible responses are provided to address client needs. We ensure a high degree of quality is always maintained and delivered to meet client demand.

New Products: Vermeer T1655 Terrain Leveler

Equipment: Surface Mining Equipment HDD Horizontal Directional Drills for Depressurisation and Dewatering.

Other Countries: Worldwide Dealerships.

Website:

www.vermeer.com.au Offices: QLD

Activity: We support our clients throughout the project life cycle, from strategy, design and initiation to implementation, management, final transition and close-out. We focus on the process and people perspective of project implementation. We support mining processes and their providers throughout each one of the five stages of the asset value chain, including ongoing operational improvement. We have strong experience in delivering value in the Information Management, Supply, Health and Safety, Operations, Human Resources and Finance business units. The scope of our work includes process optimisation, productivity growth, cost optimisation, project implementation and program evaluation.

Other Countries: We have offices in Australia, Chile and Peru. We have a presence and developed projects in the Americas (USA, Colombia, Argentina, etc) and Singapore.

Specialisation: Our Business Improvement Service Line helps clients align their internal structures and processes with their business offerings through organisational design, operational redesign and process improvement. Our Transformational Support Services help clients implement these structural and process-related changes through organisational change management (evaluation of change readiness, mitigating change resistance, communications, training and business engagement) and program/project management.

Website:

www.vantaz.com Offices: QLD Address:

Phone:

Level 10, 87 Wickham Terrace, BRISBANE, QLD 4000

0419 286 297

Vermeer Sales & Service About:

Address:

Phone:

Veyance Belting Pty Ltd About: Here in Australia, we service our conveyor belt customers with design, manufacturing, installation, testing, splice kits and on-site servicing. Our Conveyor range of products includes steel-cord (FLEXSTEEL®), fabric (GLIDE® FRAS and PLYLON® and COAL FLO PVC conveyor belts. Solarshield 750 heat resistant belts combined with our Cord Guard XD Belt Rip Protection and Scanning, Easyrider™, Survivor™, Racetrack Reels and Preform™ Splicing to bring you the best conveyor belts technology. Conveying the Lowest Cost per Tonne. Our purchase by the Carlyle Group in 2007 established our new global name Veyance Technologies Inc. The name “Veyance” combines two critical components of our daily operations. All of our products conVEY materials, fluids or energy, and our ultimate goal is to optimise customer performANCE.

Activity: Australian Manufacturer of Conveyor Belts and importer of Engineered Rubber products for mining, energy, industrial and automotive applications.

Products: Steel Cord, Fabric and PVC Conveyor Belt, Cord Guard XD Rip Protection and Scanning, Preform Splice Kits, Industrial and Hydraulic Hose, Sheet Rubber, Air Springs and Power Transmission Belts.

New Products: Easyrider (Low Rolling Resistance) CordGuard XD Protection Systems; Coal Flo PVC and PVG solid woven belts; Solarshield 750 heat resistant belts; Preform Spice Kits.

Other Countries: Goodyear Engineered products by Veyance Technologies is a global business operating in 35 facilities across 12 countries.

Over 60 years of manufacturing expertise in developing innovative equipment for the construction industry, including pipeline, telecommunication, underground utilities installation, energy and mining sectors.

Specialisation:

Activity:

Website:

Equipment Dealership.

www.goodyearep.com

Products: Surface Mining Rock Excavation Trenchers Horizontal Directional Drills.

154 • MESCA MEMBERS DIRECTORY VOL 8

Fax:

671 Ingham Road, 1800 620 720 07 3273 6868 TOWNSVILLE, QLD 4818

Conveyor Belting, Scanning, Splicing, Installation, Sheet Rubber, Industrial Hose (Bulk and Coupled Assemblies) and Power Transmission products.

MESCA SUPPLIERS Industry Buying Guide

Offices: NSW

New Products:

Address:

Phone:

Level 3, 470 Church Street, NORTH PARRAMATTA, NSW 2151

02 8839 9600 02 9890 8973

Fax:

Victaulic Vortex Fire Suppression System Style SC77 Flexible Coupling for Shouldered Pipe (featuring installationready technology).

Website:

www.victaulic.com Offices: VIC

Victaulic About: Founded in 1925, Victaulic is the world’s leading producer of mechanical pipe joining systems. Headquartered in Easton, Pa., USA, Victaulic has manufacturing and distribution facilities worldwide and employs more than 3,500 people. The Company develops products for a full range of mining, industrial, commercial and institutional piping system applications.

Activity: Victaulic produces mechanical pipe joining products for a full range of mining, industrial, commercial and institutional piping system applications.

Products: Grooved couplings, Fittings, Valves and Suction Diffusers

Address:

Phone:

Fax:

Unit 1/7 Chambers Road, ALTONA NORTH, VIC 3025

039392 4000

03 9399 9905

Voith Turbo Pty Ltd Activity: Industry (Mining – surface and underground), Power and Water Utilities, Oil and Gas, Petrochemical), Mobile (Rail and Bus), Marine, Paper, Hydro Power Generation, Industrial Services, Wind Technology.

Products:

Couplings and fittings for shouldered pipe

Voith Fluid Couplings (variable speed, fill control and constant fill), Voith Universal Joint Shafts, Voith-Safeset (torque limiting) couplings, Voith-Valvex Valves (MDA), Voith Rail and Bus equipment (Transmissions, axle drives, cooling systems, Locomotives, Scharfenberg couplers, Koni dampers), Voith Retarders (hyd. brakes), Voith-Kuesel Resilient couplings (Mobile, Marine, Rail), Fluidrive and Sime fluid couplings, Voith-BHS High-performance Gearboxes (Power, Petrochemical, Oil and Gas), Voith-Hand L Hydrostatic

Aquamine Reusable PVC System Depend-O-Lok Large Diameter Couplings Fire Protection Couplings, Fittings, Sprinklers and Devices

ai_ait_41.2_en aik

Victaulic Vortex Fire Suppression System.

Raise the Productivity of Your Belt Conveyor. TurboBelt 780 TPXL Would you like to avoid unscheduled downtimes of your belt conveyor? There are many reasons to choose the highly efficient fluid coupling TurboBelt 780 TPXL from Voith: • High availability of up to 99.8 % and reduced maintenance • Transmits twice the power due to innovative XL blade wheel profile

327507A_Voith Turbo | 2065.indd 1

• Smooth start-ups of overloaded

belt conveyors • Protection of the belt and the

entire driveline • Fast and alignment-free installation

vtausydney@voith.com Tel.+61 (2) 9609 9403 www.australia.voithturbo.com

11/11/13 11:09 AM

MESCA MEMBERS DIRECTORY VOL 8 • 155

MESCA SUPPLIERS Industry Buying Guide

pumps and hydraulic systems, Voith electric control technology (steam and gas turbines, compressors), ACIDA Monitoring and Diagnostics, WINDRIVE (wind technology), Voith Schneider Propullsion, Voith Radial Propeller.

Website:

Other Countries:

Offices: QLD

www.wagner.com.au

100 countries, 290 locations worldwide, including New Zealand.

Address:

Specialisation:

Cnr Anzac Avenue 07 4637 7777 07 4637 7778 & Anderley Street, DRAYTON NORTH, QLD 4350

Power Transmission Equipment.

Website:

www.australia.voithturbo.com; www.voith.com Offices: Head Office – NSW Address:

Phone:

503 Victoria Street, WETHERILL PARK, NSW 2164

02 9609 9400 02 9756 4677

Fax:

Wagners About: Wagners is an internationally recognised group of companies that are collectively seen as a leader in the fields of ready mixed and precast concrete, quarries, transport, concrete pumping, composite fibre technologies and project consulting services. Employing more than 800 people globally, this Australian-owned company is committed to the pursuit of excellence and quality in all Wagners’ products and services. Wagners operates major plants at Toowoomba, Townsville and Brisbane, and smaller plants at over twenty locations in regional South East Queensland. Wagners Global are currently managing extensive contracts in PNG. Wagners has recently undertaken a major expansion in South East Queensland, which includes the construction of Queensland’s first independently owned cement plant on the Brisbane River, and several additional metropolitan concrete plants. Wagners expertise in remote and challenging site operations has led to the establishment of a large and successful project division. Over several years, this division has completed concrete, contract crushing, haulage and civil contracts in the most remote parts of Australia and in many countries around the world that have required well-organised and detailed logistics to ensure satisfactory performance. The company’s Australian headquarters in Toowoomba, Queensland, and Global Headquarters in Kuala Lumpur, Malaysia, provide an extensive network of Management, Operations, Financial, Legal and Administration staff to support Wagners operations worldwide.

Activity: Current projects include a number of concrete projects in North and Central Queensland, mine haulage projects in Central and Northern Queensland and NSW, contract crushing projects throughout Queensland and WA.

Products: Ready mixed concrete, pre-cast concrete, concrete pumping, cement and fly ash, reinforcing steel, quarry products, contract crushing, transport services, project management and consulting and composite fibre technologies.

New Products: Composite bridge decks, boardwalks, beams and electrical cross arms. EFC – Earth Friendly Concrete.

Other Countries: Russia; Malaysia; United States; South America.

156 • MESCA MEMBERS DIRECTORY VOL 8

Phone:

Fax:

Walz Construction Company Pty Ltd Offices: QLD Address:

Phone:

Fax:

17 Garfield Street, 07 4976 7999 07 4972 4087 GLADSTONE, QLD 4680

WDS Mining Offices: NSW Address:

Phone:

27 Kalinya Close, EDGEWORTH, NSW 2285

02 4903 4000 02 4903 4099

Fax:

WDT (Engineers) Pty Ltd Offices: QLD Address:

Phone:

PO Box 115, ACACIA RIDGE, QLD 4110

07 3345 4000 07 3345 8697

Fax:

Webforge Queensland Activity: Webforge – Manufacture of industrial floor and access systems.

Products: Mild Steel Floor Grating, Stair treads, Aluminium grating, Fibre-glass grating, Expanded metal, Monowills Handrail system, Drainage grates and manhole covers. Outlook Sunscreens.

New Products: Expanded Metal, Outlook Sunscreens.

Website:

www.webforge.com.au Offices: QLD Address:

Phone:

1149 Kingsford Smith Drive, PINKENBA, QLD 4008

07 3859 8300 07 3859 8390

Fax:

MESCA SUPPLIERS Industry Buying Guide

WEG Australia Pty Ltd Activity: WEG is the world’s most vertically integrated electric motor and drives manufacturer, and unique in that they draw their own winding wire, produce their own resins, varnish and paint. Thus providing industry with a totally integrated system of electric motors, together with control and protection equipment.

Products: Electrical Motors (LV and HV):

Offices: NSW Address:

Phone:

Fax:

512 Victoria Street, 02 9616 3900 02 9725 4002 WETHERILL PARK, NSW 2164

Weir Minerals Ltd About:

•

Single-Phase motors up to 9.2kW

•

LV three-phase motors up to 2,200kW

•

HV motors up to 50,000kW and 13,800V

•

DC Motors up to 2,000kW

Activity:

•

Wound Rotor Motors up to 50,000kW and 13,800V

•

Synchronous motors

•

Explosion proof motors (Ex-d) to 3,100kW and 11kV

•

LV and HV Ex-n motors up to 10,000kW and 11kV

Weir Minerals are specialists in delivering and supporting mill circuit solutions, including pumps, hydrocyclones, valves, hose, screens and screen media, cone crushers, centrifuges and baskets, rubber, wear-resistant linings, mill systems and mine dewatering solutions for global mining and mineral processing and general industry.

•

Ex-e motors

•

Ex-p motors.

Generators: •

Brushless Synchronous Generators for diesel gen-sets up to 4,500kVA

•

Hydro-generators up to 25,000kVA

•

Turbo-generators up to 62,500kVA.

Drives (soft starters and VSD): •

Singe-phase drives up to 75kW

•

Three-phase 415V drives up to 1,750kW

•

Three-phase 690V drives up to 2,000kW

•

Medium Voltage Drive up to 5,500kW and 4,160V

•

Soft-Starters up to 3,600kW.

Motor Control: •

Push buttons and pilot lights

•

Contactors and mini contactors

•

Overload Relays

•

Motor Circuit Breakers

•

Air circuit breakers from 1600 to 5000A

•

Phase failure, phase reversal, level, under/over voltage and PTC relays

•

DOL starters to 18.5kW

•

Enclosed star/delta starters to 75kW

•

Motor run capacitors

•

Power factor correction capacitors and Transformers.

Transformers •

Dry-Type Transformers up to 15,000kVA

•

Distribution Transformers up to 500kVA

•

Power Transformers up to 300,000kVA and 550kV.

New Products: New W22 High Efficiency E3 range and W Line motor (water jacket motor).

The key to our success is that we enable our customers to achieve significant process efficiencies in applications where the cost of ownership often outweighs capital cost as a priority.

Our product strength lies in the excellence of our hydraulic designs and wear, corrosion and abrasion-resistant materials. In slurry pumping, processing and control applications where the cost of ownership often outweighs capital cost as a priority, we help our customers address such issues as longevity, capacity, efficiency of operation, and maintenance. We are there for you and your operation, every step of the way providing Expertise where it countsTM.

Products: Warman: Centrifugal Slurry Pumps Geho: PD Slurry Pumps Linatex Rubber products Rubber Sheets, Moulded products and Mining Hose Enduron – Comminution equipment Screens, Screen Media, Cone Crushers KHD: High Pressure Grinding Rolls Vulco: Wear Resistant Linings, Mill Systems Cavex: Hydrocyclones Floway Pumps: Vertical Turbine Pumps Isogate: Slurry Valves Multiflo: Mine Dewatering Solutions Lewis Pumps: Vertical Chemical Pumps Aspir: Centrifuges and Baskets Weir Minerals Services.

Website:

www.weirminerals.com Offices: NSW Address:

Phone:

Locked Bag 51, ARTARMON, NSW 1570

02 9934 5100 02 9934 5201

Fax:

Other Countries: Australia, New Zealand, Brazil, Singapore, China, Japan, India, Dubai, Portugal, IK, Italy, Germany, Belgium, France, Spain, Russia, South Africa and the entire America. WEG is present in more than 110 countries.

Specialisation: Markets: Mining, Coal Mining, Petrochemical, Water, Generation, Oil and Gas From small systems through to complex integrated projects.

Website:

www.weg.net/au MESCA MEMBERS DIRECTORY VOL 8 • 157

MESCA SUPPLIERS Industry Buying Guide

Whittens

Windsor Business Solutions

About:

Activity:

Whittens Pty Ltd is a specialist civil contractor working primarily in the remote civil, mining and LNG Gas sectors.

Specialists in Enterprise asset management and SAP. We are engaged by large organisations to improve their productivity and operational effectiveness through managing their operations and physical assets better.

Currently, we engage approximately 200 direct employees to deliver our projects and contracts, with a substantial database of new and previous employees available to increase our capacity without compromising service. Through our plant hire company, we are able to support our construction activities with a fleet of well-maintained plant and equipment, including a substantial investment in formwork and falsework systems. Across the resources, infrastructure, oil and gas sectors, Whittens has delivered every facet of concrete construction imaginable, from heavy industrial foundations to mining infrastructure and LNG structures. Our projects span the states of Western Australia, Queensland, New South Wales and the Northern Territory, and contribute to vital national infrastructure that drives Australia’s economy. As we are a specialist remote contractor, we are able to cover all states and territories. We have worked on key projects including:

Products: Business audits, Business process re-engineering, maintenance management, SAP developments and implementations. Mobility solution, training.

New Products: Syclo mobility solutions – improve the capture of field data from maintenance inspections and repairs Visual enterprise 3-D modelling.

Specialisation: Making operations more productive.

•

Pluto LNG

•

Sino Iron

•

Brockman 4

www.wbss.com.au

•

Daunia

•

BMAs Broadmeadows and Caval Ridge

Offices: QLD

•

NCIG Coal Loader Stage 1 to 2 and Wilpinjong Mine.

Website:

Whittens prides itself on being at the forefront of technology, and use not only the best equipment, but also the latest in material technology, to deliver our clients the safest, fastest and most practical solutions to their specific project needs.

Activity: Whittens are able provide the following services: •

Directly Employed Workforce

•

Civil Concrete Construction

•

Surveying

•

Civil Earthworks

•

Concrete Pumping

•

Supply and Installation of Formwork and Falsework

•

Supply and Installation of Reinforcing Steel, Embedded Items & Concrete

•

Plant and Equipment

•

Concrete Batching.

Address:

Phone:

Fax:

9/67 Depot Street, 1300 927 716 07 3266 8177 BANYO, QLD 4014

WorkPac About: WorkPac is an Australian company that delivers Human Capital Solutions. We maximise productivity and mitigate risk in the people component of our clients’ business.

Equipment Whittens own a modern fleet of Plant and Machinery, including Concrete pumps, excavators, tip and flatbed trucks, material handlers, minespec utilities, generators/welders etc. We also own a substantial quantity of Formwork Systems for use in various applications. For further information, please visit our website.

Website:

www.whittensgroup.com.au Offices: Head Office – WA Address:

Phone:

Level 1, 76 Hasler Road, OSBORNE BARK, WA 6017

1300 911 535 1300 208 365

Fax:

Our specialist teams work with companies of all sizes in the mining, construction, engineering, manufacturing, oil and gas, and healthcare industries. We provide temporary and permanent staffing to companies requiring multidisciplined and experienced personnel ranging from blue collar to white collar and office support. Established in Queensland in 1997, WorkPac has grown to operate in over 45 offices in metro and regional locations across Australia. We employ more than 350 full-time staff and manage a field-team workforce of over 6000 people across multiple client sites. We partner with some of Australia’s most reputable companies to deliver significant infrastructure and mining projects. The Company has experienced unprecedented growth levels over the past few years, achieving a turnover of $332 million in the 2009/2010 year and $534 million in the 2010/2011 financial year.

Activity: WorkPac Group is a leading supplier of Human Capital to the Mining, Construction, Engineering, Oil and Gas, and HealthCare industries.

Products: Recruitment of temporary and permanent blue and white collar staff. Industry leading Occupational Health and Safety Solutions.

Website:

www.workpac.com

158 • MESCA MEMBERS DIRECTORY VOL 8

MESCA SUPPLIERS Industry Buying Guide

Offices: QLD Address:

Phone:

Shop C/46 Callide Street, BILOELA, QLD 4715

07 4980 4655 07 4992 5824

Fax:

Wormald About: Wormald is a leading provider of fire protection solutions and has been helping to protect people and property for over 120 years. Our expertise spans the design, manufacture, installation and service of fire products and equipment backed up with a comprehensive range of fire services from engineering advice to fire training. Wormald supplies specialist fire protection services to the mining, marine, industrial, commercial and retail industries. Many leading companies and government bodies also rely on our specialist expertise. Specialising in fire detection and protection systems since 1889 and operating in over 50 locations regionally, you can rely on Wormald to help protect you. Wormald is part of Tyco, one of the world’s largest fire and safety systems organisation operating in nearly 50 countries. This gives us unique access to a remarkable depth and breadth of physical and intellectual resources, providing global strength to reinforce our local know-how.

Activity: Wormald’s specialist Major Projects team can help reduce capital investment through customised fire protection solutions that meet and exceed industrial risk management requirements in key markets like Power Generation, Oil and Gas, Petrochemical, and Mining and Minerals. Wormald can provide state-of-the-art asset and life safety protection to operations that are high-risk, production intensive and provide an essential service where business interruption cannot be tolerated. Wormald’s Major Project team survey your facilities and recommend a fire solution that will form an integral part of your overall risk management plan. Wormald’s Contract Specific Project Plan is based on our commitment to customer satisfaction, corporate quality principles, the requirements of international standards set by ISO9001, site specific procedures and customer specifications.

Products: Vehicle Fire Suppression Systems, Fire Extinguishers, Fire Hydrants, Fire Hose Reels, Fire Safety Training, Servicing, Compliance and Testing, Maintenance, Fire Monitoring, Emergency Response Equipment, Breathing Apparatus, Thermal Imaging, Portable and Fixed Gas Detection, Passive Fire products, Fire Alarm and Evacuation Systems, Fire Sprinkler Systems, Gaseous Agents, Water Spray Deluge and Water Mist Systems, Foam Systems, Kitchen Suppression Systems, Fire Resisting Safes and Cabinets.

Website:

www.wormald.com.au Offices: Head Office – NSW Address:

Phone:

Unit 1, 2-8 South Street, RYDALMERE, NSW 2116

133 166

MESCA MEMBERS DIRECTORY VOL 8 • 159

MINING preseNts a uNIquely broad raNGe of rIsks & eNvIroNMeNtal factors that deMaNd hIGhly sophIstIcated aNd INteGrated safety & securIty solutIoNs ADT Security has developed end-to-end security solutions for mining operations all around the world and is the largest and most experienced electronic solutions provider. As part of our continued commitment to the industry, ADT Security have been leading the integration of security and safety systems with the mineâ&#x20AC;&#x2122;s business management software (including human resources) allowing greater transparency, efficiency and control when it comes to testing and training compliance.

Our systems can also prepare thorough risk management analyses to help identify areas of improvement. As well as advanced perimeter and intruder security, access control, video surveillance, asset tracking & communication. Give your ADT Security Representative a call to discuss how they can help you provide a more safe and secure environment for all. ADT Always There

TO FIND OUT MORE, CALL 131 238 OR VISIT ADTSECURITY.COM.AU/SOLUTIONS

Protect your most valuable resource Wormald速 is an expert in mining fire safety. Our knowledge, skills and advanced technologies are integral to the safety of mining sites across Australia, and backed by 120 years of experience. Make sure your most valuable resource is protected.

Call your Wormald Mining Fire Specialist on 1300 556 015 or visit wormald.com.au/mining

A Tyco Business

Redispan DfMAâ&#x201E;˘ Conveyors 15 Old Punt Road Tomago, NSW 2322 Australia Phone: 1300 131 370 or +61 2 4913 7600 www.redispan.com.au