IMS - Tool holders catalogue - Wood by Best Italian Graphic Designer

LEGNo / WOOD

Tool holders catalogue Parts of your business

Tool holders catalogue Parts of your business may 2009 2nd edition

Index 2 3-6 7 - 10 11 - 15 16 - 20 21 22 23 24 - 25 26 27 28 - 29 30 31 - 38 39 40 41 - 49 50 - 51 52 53 - 57 58 - 60 61 62 63 64 65 - 68 69 70 - 71 72 - 78 79 80 81 - 83 84 85 - 87 88 89 90 - 93 94 95 96 97 98 99 - 100 101 102 103 104 105 106 107 108 109 110 111 112

Tool holders HSK Type E 25-32-40-50 Tool holders Type HSK 50F DIN 69893 Tool holders Type HSK 50E DIN 69893 Tool holders Type HSK 63F DIN 69893 Tool holders Type HSK 63E DIN 69893 Tool holders HSK63E shrink fit chucks - Tool holders Type HSK Tool holders Type HSK 63F DIN 69893 Essetre Tool holders Type HSK40E Alberti Tool holders Type HSK Type “Weinig” Tool holders Type HSK 63C DIN 69893 Tool holders ISO 10 - Tool holders ISO 15, ISO 20, ISO25 for electrospindle “Colombo & Giordano” - ELTE Tool holders ISO 25 Tool holders ISO 25 Flange 38 - Tool holders ISO 30 with toothed flange Tool holders ISO 30 Reduction from ISO/DIN 69871/A to HSK-R - Tool holders ISO 30 “Thermwood” Tool holders HSK63F “Thermwood” - Tool holders Type BT20 Tool holders ISO 30 Tool holders ISO 35 with Flange BT Tool holders ISO 35 with Flange BT - Tool holders ISO 40 with Flange DIN 69871 Tool holders ISO 40 Tool holders with threaded nut Tool holders with morse taper Tool holders with morse taper Nut with double thread - Tool holders Paolino Bacci - ER Collet holder cylindrical shank Drill holder with quick change Reduction sleeve from ISO/DIN 69871/A with internal collet to hold HSK shanks - Digital height measuring device Cylindrical connection Collets CNC Wood Collets - Nut TG Stiff quick change tap collets without overload protection - Quick change clutch tap collets with overload protection Nut Hermetic nut for collet chuck capacity 2/16 3/20 - Capacity Disks Pull studs Reduced flanged cap - Expanded flanged cap Locking wrenches for nuts Dynamometrical wrench Tooling clamper Security locking system IMS - Shrink machines Release kit IMS - Clamping chucks HSK - New Petal collets Locking-unlocking system for plastic fork holder Collets for clamping tool holders with niploy treatment for electrospindle Cone cleaner - Trolley Accuracy runout Balancing Diagrams Pull stud angle 45° DIN 7388/2-B and Pull stud angle 15° DIN 69872 Protective treatments Difference between certified and uncertified pull stud Special features of titan tool holders Make and model of HSK spindle CNC router Make and model of CNC router Collet dimensions

Tool holders HSK Type E 25-32-40-50 Collet chuck holders Code HSK25E29023 HSK32E29023 HSK32E29025 HSK32E29026 HSK40E29024 HSK40E29026 HSK40E29027

Code HSK50E29026 HSK50E29026 HSK50E29026

Capacity

Description

1-10 1-10 1-13 1-16 1-10 1-16 1-20

Collet chucks holders Collet chucks holders Collet chucks holders Collet chucks holders Collet chucks holders Collet chucks holders Collet chucks holders

Capacity

Description

1-16 1-20 1-26

Collet chucks holders Collet chucks holders Collet chucks holders

Collet type ER16 ER16 ER20 ER25 ER16 ER 25 ER 32

Collet type ER 25 ER 32 ER 40

L Min.

HSK size

40 40 40 60 60 70 70

22 22 28 35 28 42 50

HSK-E-25 HSK-E-32 HSK-E-32 HSK-E-32 HSK-E-40 HSK-E-40 HSK-E-40

L Min.

HSK size

70 70 70

42 50 63

HSK-E-50 HSK-E-50 HSK-E-50

Special tool holders are made on request

Tool holders Type HSK 50F DIN 69893 Collet chucks holders for Collets ER - ort25 Code WF101 WF102 WF103 WF104 WF105 WF108 WF109 WF110 WF111 WF112 WF114 WF116

Description Collet Type Collet chucks holders with nut ER16 Collet chucks holders without nut ER16 Collet chucks holders with nut ER25 Collet chucks holders without nut ER25 Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER16 Collet chucks holders without Lh nut ER16 Collet chucks holders with Lh nut ER25 Collet chucks holders without Lh nut ER25 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32

L1 L D Capacity 50 60 28 1/10 50 50 60 42 1/16 50 50 62,5 50 1/20 50 50 60 28 1/10 50 50 60 42 1/16 50 50 62,5 50 1/20 50

Code WF122 WF124 WF126 WF128 WF132 WF134 WF136 WF138

Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut

L1 60 60 60 60 60 60 60 60

Collet Type ER40 ER40 ORT25A ORT25A ER40 ER40 ORT25A ORT25A

For collets see page from 72 to 79

Special tool holders are made on request

L D Capacity 76,5 63 3/30 76,5 60

3/25

76,5

3/30

76,5

3/25

Tool holders Type HSK 50F DIN 69893 with embedded nut Collet chucks holders capacity 3/20 for Collets ER32 - 3/30 for Collets ER40 Code WF1012 WF1014 WF1016 WF1018

Description Collet Type Collet chucks holders with emboded nut ER32 Collet chucks holders with emboded nut ER40 Collet chucks holders with embedded nut with ring ER32 Collet chucks holders with embedded nut with ring ER40

For collets see page from 72 to 79

Special tool holders are made on request

L1 68 76 68 76

L 72 80 72 80

D 50 63 63 73

Tool holders Type HSK 50F DIN 69893 Mill holder arbor diameter 30 - 1”1/4 Code WF142 WF144 WF146 WF148 WF150 WF151

Description

Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

93 103 123 203 80 150

30 30 30 30 1”1/4 1”1/4

L 93 103 123 203

D 35 35 35 35

L 93 103 123 203 200

D 40 40 40 40 50

Mill holder arbor diameter 35 Code WF152 WF154 WF156 WF158

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

Mill holder arbor diameter 40 Code WF162 WF164 WF166 WF168 WF169

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Black Bars

RECESSED END CAP

Arbors are supplied with reduced blocked Blocking type specifications are always needed FLANGED END CAP

Special tool holders are made on request

Tool holders Type HSK 50F DIN 69893 Mill holder for cylindrical shank Type Whistle Notch DIN 1835E Code WF181 WF182 WF183 WF184 WF185 WF186 WF187 WF188 WF189 WF190 WF191

d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1”

D 25 28 35 42 48 52 65 25 42 52 65

L 70 70 70 70 70 70 110 70 70 70 110

Mill holder for cylindrical shank Type Weldon DIN 1835 Code WF191 WF192 WF193 WF194 WF195 WF196 WF197 WF198 WF199 WF200 WF201

d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1”

D 25 28 35 42 48 52 65 25 42 52 65

L 70 70 70 70 70 70 110 70 70 70 110

Special tool holders are made on request

Tool holders Type HSK 50E DIN 69893 Collet chucks holders for Collets ER 16-25-32-40, ORT25 Code WE101 WE102 WE106 WE107 WE109 WE110 WE103 WE105 WE104 WE108 WE114 WE116 WE122 WE124 WE132 WE134 WE126 WE128 WE136 WE138

Description Collet Type Collet chucks holders with nut ER16 Collet chucks holders without nut ER16 Collet chucks holders with nut Lh ER16 Collet chucks holders without nut Lh ER16 Collet chucks holders with nut Lh ER25 Collet chucks holders without nut Lh ER25 Collet chucks holders with nut ER25 Collet chucks holders without nut ER25 Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32 Collet chucks holders with nut ER40 Collet chucks holders without nut ER40 Collet chucks holders with Lh nut ER40 Collet chucks holders without Lh nut ER40 ORT25A Collet chucks holders with nut ORT25A Collet chucks holders without nut ORT25A Collet chucks holders with Lh nut ORT25A Collet chucks holders without Lh nut

For collets see page from 72 to 79

Special tool holders are made on request

L1 50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 60 60 60 60

L D Capacity 62,0 28 1/10 62,0 28 62,0 42

1/16

62,0 42 62,5 50

1/20

62,5 50 76,5 63

3/30

76,5 63 76,5 60 76,5 60

3/25

Tool holders Type HSK 50E DIN 69893 with embedded nut Collet chucks holders capacity 3/20 for Collets ER32 - 3/30 for Collets ER40 Code WE1012 WE1014 WE1016 WE1018

Description Collet chucks holders with emboded nut Collet chucks holders with emboded nut Collet chucks holders with embedded nut with ring Collet chucks holders with embedded nut with ring

Collet Type ER32 ER40 ER32 ER40

For collets see page from 72 to 79

Special tool holders are made on request

L1 68 76 68 76

L 72 80 72 80

D 50 63 63 73

Tool holders Type HSK 50E DIN 69893 Mill holder arbor diameter 30 - 1”1/4 Code WE142 WE144 WE146 WE148 WE150 WE151

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203 80 150

D 30 30 30 30 1”1/4 1”1/4

Mill holder arbor diameter 35 Code WE152 WE154 WE156 WE158

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 35 35 35 35

Mill holder arbor diameter 40 Code WE162 WE164 WE166 WE168 WE168

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Black Bars

L 93 103 123 203 200

D 40 40 40 40 50

RECESSED END CAP

Arbors are supplied with reduced blocked Blocking type specifications are always needed

Special tool holders are made on request

FLANGED END CAP

Tool holders Type HSK 50E DIN 69893 Mill holder for cylindrical shank Type Whistle Notch DIN 1835E Code WE181 WE182 WE183 WE184 WE185 WE186 WE187 WE188 WE189 WE190 WE191

d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1”

D 25 28 35 42 48 52 65 25 42 52 65

L 70 70 70 70 70 70 110 70 70 70 110

Mill holder for cylindrical shank Type Weldon DIN 1835 Code d D WE191 6 25 WE192 8 28 WE193 10 35 WE194 12 42 WE195 16 48 WE196 20 52 WE197 25 65 WE198 1/4” 25 WE199 1/2” 42 WE200 3/4” 52 WE201 1” 65

L 70 70 70 70 70 70 110 70 70 70 110

Special tool holders are made on request

Tool holders Type HSK 63F DIN 69893 Collet chucks holders for Collets ER 16-25-32-40, ORT25 - TG Code WF201 WF202 WF239 WF240 WF202-L100 WF202-L160 WF203-L100 WF203-L160 WF203 WF205 WF241 WF242 WF208-L100 WF208-L160 WF204 WF208 WF214 WF216 WF222-L100 WF222-L160 WF222 WF224 WF232 WF234 WF226 WF228 WF236 WF238 WF204TG75 WF204TG100 WF204TG150

Description Collet Type Collet chucks holders with nut ER16 Collet chucks holders without nut ER16 Collet chucks holders with Lh nut ER16 Collet chucks holders without Lh nut ER16 Collet chucks holders with nut ER16 Collet chucks holders without nut ER16 Collet chucks holders with nut ER25 Collet chucks holders without nut ER25 Collet chucks holders with nut ER25 Collet chucks holders without nut ER25 Collet chucks holders with Lh nut ER25 Collet chucks holders without Lh nut ER25 Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 ER32 Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut Collet chucks holders without Lh nut ER32 Collet chucks holders with nut ER40 Collet chucks holders without nut ER40 Collet chucks holders with nut ER40 Collet chucks holders without nut ER40 Collet chucks holders with Lh nut ER40 Collet chucks holders without Lh nut ER40 Collet chucks holders with nut ORT25A Collet chucks holders without nut ORT25A Collet chucks holders with Lh nut ORT25A Collet chucks holders without Lh nut ORT25A Collet chucks holders with nut TG75 Collet chucks holders with nut TG100 Collet chucks holders with nut TG150

For “SCM”,“Biesse”, “Essetre”,”Masterwood”, ”Morbidelli”, “Bulleri”, “Sicar”, “Weeke”, “Busellato”

Special tool holders are made on request

L1 50 50 50 50 90 150 90 150 50 50 50 50 87,5 147,5 60 60 60 60 83,5 143,5 60 60 60 60 60 60 60 60

L 60

D Cap. 28 1/10

100 160 100 160 60

22 22 35 1/16 35 42

100 50 1/20 160 50 72,5 50 72,5 50 100 63 3/30 160 63 76,5 63 76,5 63 76,5 60 3/25 76,5 60 100 100 100

Tool holders Type HSK 63F DIN 69893 with embedded nut Collet chucks holders capacity 3/20 for Collets ER32 - 3/30 for Collets ER40

Code WF2012 WF2014 WF2016 WF2018

For collets see page from 72 to 79

Special tool holders are made on request

L1 68 76 68 76

L 72 80 72 80

D 50 63 63 73

Tool holders Type HSK63F DIN 69893 Mill holder arbor diameter 20 - 25 - 30 - 1â&#x20AC;?1/4 Code WF240 WF241 WF242 WF243 WF244 WF245 WF246 WF247 WF248 WF249 WF250 WF251

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

A 33 33 33 42 33 42 33 42 33 42 33 33

L 70 70 93 93 103 103 123 123 203 203 80 150

D 20 25 30 30 30 30 30 30 30 30 1â&#x20AC;?1/4 1â&#x20AC;?1/4

A 33 42 33 42 33 42 33 42

L 93 93 103 103 123 123 203 203

D 35 35 35 35 35 35 35 35

A 33 42 33 42 33 42 33 42 -

L 93 93 103 103 123 123 203 203 200

Mill holder arbor diameter 35 Code WF252 WF253 WF254 WF255 WF256 WF257 WF258 WF259

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

Mill holder arbor diameter 40 Code WF262 WF263 WF264 WF265 WF266 WF267 WF268 WF269 WF279

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Black Bars

D 40 40 40 40 40 40 40 40 63

Arbors are supplied with reduced blocked Blocking type specifications are always needed Special tool holders are made on request

RECESSED END CAP

FLANGED END CAP

Tool holders Type HSK 63F DIN 69893 Mill holder for cylindrical shank Type Whistle Notch DIN 1835E Code WF281 WF282 WF283 WF284 WF285 WF286 WF287 WF288 WF289 WF290 WF291

d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1”

D 25 28 35 42 48 52 65 25 42 52 65

L 70 70 70 70 70 70 110 70 70 70 110

For “SCM”,“Biesse”,“Essetre”, ”Masterwood”,”Morbidelli”, “Bulleri”, “Sicar”, “Weeke”, “Busellato”

Mill holder for cylindrical shank Type Weldon DIN 1835 Code d WF291 6 WF292 8 WF293 10 WF294 12 WF295 16 WF296 20 WF297 25 WF298 1/4” WF299 1/2” WF300 3/4” WF301 1”

D 25 28 35 42 48 52 65 25 42 52 65

L 70 70 70 70 70 70 110 70 70 70 110

For “SCM”,“Biesse”,“Essetre”, ”Masterwood”,”Morbidelli”, “Bulleri”, “Sicar”, “Weeke”, “Busellato”

Special tool holders are made on request

Tool holders Type HSK 63F Tool holders Type HSK 63F DIN 69893 Code WF240ch8P45 WF241ch8 WF242ch8 WF240ch8P80 WF241ch8P80 WF242ch8P80

SW 8x8 8x8 8x8 8x8 8x8 8x8

D 25 25 30 25 30 20

L 70 70 93 70 93 70

d 40 40 48 40 48 40

P 45 45 45 80 80 80

Tap holder double HSK 63F Code WHSK63F29076

d 19

D 35

L 80

WEI size M3/M12

Tool holders HSK63F shrink fit chucks Code D WF005 3 WF006 4 WF007 5 WF008 6 WF009 8 WF010 10 WF011 12 WF012 14 WF013 16 WF014 18 WF015 20 WF016 25 WF017 32 WF018 1/4 WF019 1/2 WF020 3/4 WF021 1“

L 80 80 80 80 80 85 90 90 95 95 95 95 95 80 90 95 95

Code WF035 WF036 WF037 WF038 WF039 WF040 WF041 WF042 WF043 WF044 WF045 WF046 WF047 WF048 WF049 WF050 WF051

D 3 4 5 6 8 10 12 14 16 18 20 25 32 1/4 1/2 3/4 1“

L 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120

Special tool holders are made on request

Tool holders Type HSK 63E DIN 69893 Collet chucks holders for Collets ER 16-25-32-40, ORT25 Code WE237 WE238 WE239 WE240 WE242-L100 WE243-L160 WE241 WE243 WE245 WE247 WE244-L100 WE245-L160 WE204 WE208 WE214 WE216 WE246-L100 WE247-L160 WE222 WE224 WE232 WE234 WE222-L100 WE222-L160 WE226 WE228 WE236 WE238

Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut

Collet Type

Capacity

ER16 ER16 ER16 ER16 ER16 ER16 ER25 ER25 ER25 ER25 ER25 ER25 ER32 ER32 ER32 ER32 ER32 ER32 ER40 ER40 ER40 ER40 ER40 ER40 ORT25A ORT25A ORT25A ORT25A

50 50 50 50 90 150 50 50 50 50 90 150 60 60 60 60 87,5 147,5 60 60 60 60 83,5 143,5 60 60 60 60

1/10

For collets see page from 72 to 79

Special tool holders are made on request

100 22 160 22 60 42 60

1/16

100 35 160 35 70 50

1/20

70 50 100 50 160 50 70 63 70

3/30

100 63 160 63 70 60 70 60

3/25

Tool holders Type HSK 63E DIN 69893 with embedded nut Collet chucks holders capacity 3/20 for Collets ER32 - 3/30 for Collets ER40 Code WE2012 WE2014 WE2016 WE2018

For collets see page from 72 to 79

Special tool holders are made on request

L1 68 76 68 76

L 72 80 72 80

D 50 63 63 73

Tool holders Type HSK 63E DIN 69893 Mill holder arbor diameter 30 - 1”1/4 Code WE242 WE244 WE246 WE248 WE250 WE251

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203 80 150

D 30 30 30 30 1“ 1/4 1“ 1/4

Mill holder arbor diameter 35 Code WE252 WE254 WE256 WE258

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 35 35 35 35

Mill holder arbor diameter 40 Code WE262 WE264 WE266 WE268

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 40 40 40 40

WE279

Black Bars

200

RECESSED END CAP

Arbors are supplied with reduced blocked Blocking type specifications are always needed Special tool holders are made on request

FLANGED END CAP

Tool holders Type HSK 63E DIN 69893 Mill holder for cylindrical shank Type Whistle Notch DIN 1835E Code WE281 WE282 WE283 WE284 WE285 WE286 WE287 WE288 WE289 WE290 WE291

d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1”

D 25 28 35 42 48 52 65 25 42 52 65

L 70 70 70 70 70 70 110 70 70 70 110

Mill holder for cylindrical shank Type Weldon DIN 1835 Code WE291 WE292 WE293 WE294 WE295 WE296 WE297 WE298 WE299 WE300 WE301

d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1”

D 25 28 35 42 48 52 65 25 42 52 65

L 70 70 70 70 70 70 110 70 70 70 110

Special tool holders are made on request

Tool holders Type HSK 63E DIN 69893

Code WE240ch8P45 WE241ch8P45 WE242ch8P45 WE241ch8P80 WE242ch8P80 WE240ch8P80

SW 8x8 8x8 8x8 8x8 8x8 8x8

D 20 25 30 25 30 20

L 70 70 93 70 93 70

d 40 40 48 40 48 40

P 45 45 45 80 80 80

Special tool holders are made on request

Tool holders HSK63E shrink fit chucks Code WE005 WE006 WE007 WE008 WE009 WE010 WE011 WE012 WE013 WE014 WE015 WE016 WE017 WE018 WE019 WE020 WE021

D 3 4 5 6 8 10 12 14 16 18 20 25 32 1/4“ 1/2“ 3/4“ 1“

L 80 80 80 80 80 85 90 90 95 95 95 95 95 80 90 95 95

Code D L WE035 3 120 WE036 4 120 WE037 5 120 WE038 6 120 WE039 8 120 WE040 10 120 WE041 12 120 WE042 14 120 WE043 16 120 WE044 18 120 WE045 20 120 WE046 25 120 WE047 32 120 WE048 1/4“ 120 WE049 1/2“ 120 WE050 3/4“ 120 WE051 1“ 120

Tool holders Type HSK Code WFHSK85S-200 WFHSK85S-320 WFHSK100B-200 WFHSK100B-300

D 40 50 50 50

d 40 40 -

L 200 300 200 350

Type SCM-HSK85-S SCM-HSK85-S sac-sueri sac-sueri

Special tool holders are made on request

Tool holders Type HSK 63F DIN 69893 Essetre Collet chucks holders capacity 3/20 for Collets ER32 Code WF204-ES WF208-ES WF214-ES WF216-ES

Description Collet Type Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32

L1 57 57 57 57

L 69,5

D 50

69,5

Collet chucks holders capacity 3/30 for Collets ER40 for Collets ORT25A Code WF222-ES WF224-ES WF226-ES WF228-ES WF232-ES WF234-ES WF236-ES WF238-ES

Special tool holders are made on request

L1 57 57 57 57 57 57 57 57

L 73,5

D 63

73,5

Tool holders Type HSK40E Alberti Collet chucks holders capacity 3/20 for Collets ER32 Code WE104-AL WE108-AL WE114-AL WE116-AL

Code WE142-AL WE144-AL WE146-AL WE148-AL WE150-AL WE151-AL

Description Collet Type Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with nut Lh ER32 Collet chucks holders without nut Lh ER32

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203 80 150

L1 50 50 50 50

L 62,5

D 50

62,5

D 30 30 30 30 1â&#x20AC;?1/4 1â&#x20AC;?1/4

For collets see page from 72 to 79

recessed end cap

flanged end cap

Special tool holders are made on request

Tool holders Type HSK Type “Weinig” Mill holder arbor 30 - 1” 1/4 Code WW242 WW244 WW246 WW248 WW250 WW251 WW251B

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203 80 150 200

D 30 30 30 30 1“ 1/4 1“ 1/4 2“

L 93 103 123 203

D 35 35 35 35

Mill holder arbor diameter 35 Code WW252 WW254 WW256 WW258

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

Mill holder arbor diameter 40 Code WW262 WW264 WW266 WW268

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 40 40 40 40

L 93 103 123 203

D 50 50 50 50

Mill holder arbor diameter 50 Code WW272 WW274 WW276 WW278

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

RECESSED END CAP

Arbors are supplied with reduced blocked Blocking type specifications are always needed Special tool holders are made on request

FLANGED END CAP

Knives arbor holder HSK Type “Weinig” Code Description WW105 Knives arbor holder WW110 Knives arbor holder

L 150 200

D 90 90

Collet chuck ER32-ER40-ORT25 Code WW131 WW132 WW133

Description Collet Type Collet chucks holders with nut ER32 Collet chucks holders with nut ER40 Collet chucks holders with nut ORT25

L1 60 60 60

Blank Bars Mill holder arbor Code WW241 WW251 WW261 WW271 WW281

Description Blank Bars Blank Bars Blank Bars Blank Bars Blank Bars

L 200 200 200 200 200

D 30 35 40 50 90

Special tool holders are made on request

L 72,5 76,5 76,5

D 50 63 60

Capacity 1/20 3/30 3/25

Tool holders Type HSK 63C DIN 69893 Mill holder arbor diameter 30 - 1” 1/4 Code WC242 WC244 WC246 WC248 WC250 WC251

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203 80 150

D 30 30 30 30 1“ 1/4 1“ 1/4

Mill holder arbor diameter 35 Code WC252 WC254 WC256 WC258

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 35 35 35 35

WC266 WC268

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 40 40 40 40

WC279

Blambers

200

Mill holder arbor diameter 40 Code WC262 WC264

For Celaschi

RECESSED END CAP

Arbors are supplied with reduced blocked Blocking type specifications are always needed Special tool holders are made on request

FLANGED END CAP

Tool holders ISO 10 Collet chuck holders ER11 - ER16 Code WIS010ER11 WIS010ER16

Description Tool holders ISO 10 ER11 Tool holders ISO 10 ER16

ER 11 16

L 30 40

D 14 22

Capacity 1/7 1/10

Tool holders ISO 15, ISO 20, ISO25 for electrospindle “Colombo & Giordano” - ELTE Code W151 W153 W202 W204 W205 W206 W207

Description Capacity Collet Type Collet chucks holders 1–7 ER11 Collet chucks holders 1 – 10 ER16 Collet chucks holders 1 – 10 ER16 Collet chucks holders 1 – 13 ER20 Collet chucks holders 1 – 16 ER25 Collet chucks holders 1 – 10 ER16 Collet chucks holders 1 – 10 ER16

L 41.6 55.6 41.6 55.6 55 40 40

L1 35 45 35 45 45 30 30

D ISO Type 16 15 C&G 22 15 C&G 22 20 C&G 28 20 C&G 42 25 C&G 22 20 ELTE 28 20 ELTE

Special tool holders are made on request

Capacity 1/7 1/10 1/13 1/16 1/10 1/10 1/10

Tool holders ISO 25 with toothed flange Collet chucks holders capacity 3/20 for Collets ER32 Code W304 W308 W314 W316

Description Collet Type Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32

L 55

D 50

Collet chucks holders capacity 3/30 for Collets ER40 - 3/26 for Collets ORT 25A Code W322 W324 W326 W328 W332 W334 W336 W338

L 72

D 63

For “Masterwood”

For collets see page from 72 to 79

Tool holders ISO 25 for electrospindle “Faemat” Code W362 W364 W366

Description Collet chucks holders Collet chucks holders Collet chucks holders

Capacity 1–7 1 – 10 1 – 13

Collet Type ER11 ER16 ER20

Special tool holders are made on request

L 30 30 40

L1 20.5 20.5 30.5

D 16 22 28

Tool holders ISO 25 with Flange DIN 69871 Collet chucks holders capacity 1/10 for Collets ER16 Code W340 W341

Description Collet chucks holders with nut Collet chucks holders without nut

Collet Type ER16 ER16

L1 30,5 30,5

L 40 40

D 22 22

L1 40 40 40 40

L 51

D 42

L1 40 40 40 40

L 51

D 50

Collet chucks holders capacity 1/16 for Collets ER25 Code W342 W344 W346 W348

Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut

Collet Type ER25 ER25 ER25 ER25

Collet chucks holders capacity 3/20 for Collets ER32 Code W352 W354 W356 W358

Description Collet Type ER32 Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut Collet chucks holders without Lh nut ER32

For collets see page from 72 to 79 Special tool holders are made on request

Tool holders ISO 25 Flange 38 Code W372 W374 W376 W378

Description Collet chucks holders Collet chucks holders Collet chucks holders Collet chucks holders

Capacity Collet Type L L1 1 – 10 ER16 40 30.5 1 – 13 ER20 40 30.5 2 – 16 ER25 51.3 37.5 3 – 20 ER32 51.3 37.5

D 22 28 42 50

Capacity 1/10 1/13 1/16 1/20

Tool holders ISO 30 with toothed flange Collet chucks holders capacity 3/20 for Collets ER32 Code W404 W408 W414 W418

Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut

Collet Type ER32 ER32 ER32 ER32

L 55

D 50

Collet chucks holders capacity 3/30 for Collets ER40 - 3/25 for Collets ORT Code W422 W424 W426 W428 W432 W434 W436 W438

Collet Type ER40 ER40 ORT25A ORT25A ER40 ER40 ORT25A ORT25A

For “SCM” and “Morbidelli”

Special tool holders are made on request

D 63

INTEGRAL PULL STUD

SPECIAL ANTI-JOINING TREATMENT

For collets see page from 72 to 79

L 72

Tool holders ISO 30 with toothed flange with embedded nut Collet chucks holders capacity 3/20 for Collets ER32 - 3/25 - ORT25 Code Description Collet Type L1 L D W4012 Collet chucks holders with emboded nut ER32 58 62 50 W4014 Collet chucks holders with emboded nut ER40 58 62 63

INTEGRAL PULL STUD

SPECIAL ANTI-JOINING TREATMENT

For “SCM” “Morbidelli” For collets see page from 72 to 79

Tool holders ISO 30 with toothed flange Mill holder arbor diameter 30 - 1” 1/4 Code W442 W444 W446 W448 W450

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203 80

D 30 30 30 30 1” 1/4

INTEGRAL PULL STUD

Mill holder arbor diameter 35 Code W452 W454 W456 W458

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 35 35 35 35

Mill holder arbor diameter 40 Code W462 W464 W466 W468

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 40 40 40 40

For “SCM”, “Morbidelli” Blocking type specifications are always needed Special tool holders are made on request

RECESSED END CAP

FLANGED END CAP

Tool holders ISO 30 with toothed flange Morse taper adapter Code W472 W474 W476

CM 1 2 3

L 60 90 90

INTEGRAL PULL STUD

For “SCM”, “Morbidelli”

Thread

Mill holder Weldon DIN 1835 Code W482 W483 W484 W486 W488 W490 W491 W492 W493 W494 W495

d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1”

D 25 28 35 42 48 52 65 25 42 52 65

L 70 70 70 70 70 70 110 70 70 70 100

For “SCM”, “Morbidelli”

Special tool holders are made on request

INTEGRAL PULL STUD

Tool holders ISO 30 with Flange DIN 69871 Collet chucks holders capacity 3/20 for Collets ER32 Code W500 W501 W502 W503 W504 W505 W505B W505C W506

Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with nut Collet chucks holders without nut

ER16 ER16 ER32 ER32 ER32 ER25 ER25 ER20 ER32

Collet Type ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery ”Biesse” machinery

L1 36 36 36 36 36 36 36 36 36

L D 48,5 22 48,5 50 48,5 48,5 48,5 48,5

50 35 35 28

For “Biesse”, “HSD” Extra short type with flat on 1st Flange For collets see page from 72 to 79

Collet chucks holders capacity 3/30 for Collets ER40 - 3/26 For Collets ORT 25A Code W522 W524 W526 W528 W532 W534 W536 W538

Collet Type ER40 ER40 ORT25A ORT25A ER40 ER40 ORT25A ORT25A

For “Biesse”, “HSD” Extra short type with flat on 1st Flange For collets see page from 72 to 79

Special tool holders are made on request

L1 42 42 42 42 42 42 42 42

L 58,5

D 63

58,5

Tool holders ISO 30 with Flange DIN 69871 with embedded nut for left and right rotation Collet chucks holders capacity 3/20 for Collets ER32 - 3/30 for Collets ER40 Code W5012 W5014

Description Collet Type Collet chucks holders with emboded nut ER32 Collet chucks holders with emboded nut ER40

L1 56 56

L 60 60

D 50 63

For “Biesse”, “HSD” For collets see page from 72 to 79

Tool holders ISO 30 with Flange DIN 69871 Collet chucks holders capacity 3/20 for Collets ER32 - TG Cod W507 W508 W514 W515 W516 W518 W519 W520 W507TG75 W507TG100 W507TG150

ER32 ER32 ER32 ER32

Collet Type L1 L D ”Busellato” machinery 43 55,5 50 ”Busellato” machinery 43 ”Busellato” machinery 43 55,5 50 ”Busellato” machinery 43 54 70,5 50 ER32 ER32 54 ER32 54 70,5 50 ER32 54 TG75 70 TG100 70 TG150 70

For all machinery using Tool holders DIN 69871 without drugging cuts. For collets see page from 72 to 79

Special tool holders are made on request

Tool holders ISO 30 with Flange DIN 69871 Collet chucks holders capacity 3/30 for Collets ER40 - 3/26 for Collets ORT 25A Code W522C W524C W526C W528C W532C W534C W536C W538C

Collet Type ER40 ER40 ORT25A ORT25A ER40 ER40 ORT25A ORT25A

L1 42 42 42 42 42 42 42 42

For all machinery using Tool holders DIN 69871 without drugging cuts.

For collets see page from 72 to 79

Special tool holders are made on request

L 58,5

D 63

58,5

Tool holders ISO 30 with Flange DIN 69871 Mill holder arbor diameter 30 - 1â&#x20AC;? 1/4 Code W539 W540 W541 W542 W544 W546 W548 W450

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 70 70 73 93 103 123 203 80

D 20 25 30 30 30 30 30 1â&#x20AC;? 1/4

Mill holder arbor diameter 35 Code W551 W552 W554 W556 W558

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 73 93 103 123 203

D 35 35 35 35 35

L 73 93 103 123 203 200

D 40 40 40 40 40 50

Mill holder arbor diameter 40 Code W561 W562 W564 W566 W568 W579

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Black Bars

For all machinery using Tool holders DIN 69871 without drugging cuts.

RECESSED END CAP

FLANGED END CAP

Blocking type specifications are always needed Special tool holders are made on request

Tool holders ISO 30 Code W54125 W54230

D 25 30

L 70 93

SW 8x8 8x8

d 40 48

Tool holders ISO 30 with Flange DIN 69871 Morse taper adapter Code W572 W574 W576

CM 1 2 3

L 60 90 90

For all machinery using Tool holders DIN 69871 without drugging cuts. Thread

Mill holders Weldon DIN 1835 Code W582 W583 W584 W586 W588 W590 W591 W592 W593 W594 W595

d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1”

D 25 28 35 42 48 52 65 25 42 52 65

L 70 70 70 70 70 70 110 70 70 70 110

Special tool holders are made on request

Tool holders ISO 30 DIN 69871/A shrink fit chucks Code W5001 W5003 W5004 W5005 W5006 W5007 W5008 W5009 W5010 W5011 W5012 W5013 W5014 W5015 W5016 W5017

D 3 4 5 6 8 10 12 14 16 18 20 25 1/4“ 1/2“ 3/4“ 1“

L 80 80 80 80 80 80 80 80 80 80 80 100 80 80 80 100

Tool holders double compensation ISO 30 Tool holders tension and compression type Code d 43256T-ST 19

D 35

L 80

WEI size M3/M12

Special tool holders are made on request

Reduction from ISO/DIN 69871/A to HSK-R Code W101SK-R W102SK-R W103SK-R W104SK-R W105SK-R W106SK-R

Description Collet type SK 40 HSK 25R SK 40 HSK 32R SK 40 HSK 40R SK 50 HSK 25R SK 50 HSK 32R SK 50 HSK 40R

Tool holders ISO 30 “Thermwood” Collet chucks holders capacity 3/20 for Collets ER32 Code W507TH W508TH W514TH W515TH

Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut

Collet Type ER32 ER32 ER32 ER32

For collets see page from 72 to 79

Special tool holders are made on request

L1 45 45 45 45

L 57.5

D 50

57.5

Tool holders HSK63F “Thermwood” Collet chucks holders ER32 - ER40 ORT Code WF204TH WF222TH WF226TH

Description Collet chucks holders Collet chucks holders Collet chucks holders

Collet Type ER32 ER40 ORT25

L 72.5 76.5 76.5

D 50 63 60

For collets see page from 72 to 79

Tool holders Type BT20 Code W100bt20

Description Collet chucks

Collet Type ER25

L 56

D 42

For collets see page from 72 to 79

Special tool holders are made on request

Capacity 1/16

Tool holders ISO 30 with Flange BT Collet chucks holders capacity 3/20 for Collets ER32 Cod W507BT W508BT W514BT W515BT W516BT W518BT W519BT W520BT

Collet Type ER32 ER32 ER32 ER32 ER32 ER32 ER32 ER32

L1 43 43 43 43 54 54 54 54

L 56

D 50

For all machinery with ISO 30 BT shank without drugging cuts and for american machinery with 2 holes on flange.

For â&#x20AC;&#x153;Shodaâ&#x20AC;?

For collets see page from 72 to 79

Special tool holders are made on request

Tool holders ISO 30 with Flange BT Collet chucks holders capacity 3/30 for Collets ER40 - 3/26 for Collets ORT 25A Code W522BT W524BT W526BT W528BT W532BT W534BT W536BT W538BT W536BTTG75 W537BTTG100

Description Collet Type L1 Collet chucks holders with nut ER40 42 Collet chucks holders without nut ER40 42 Collet chucks holders with nut ORT25A 42 Collet chucks holders without nut ORT25A 42 Collet chucks holders with Lh nut ER40 42 Collet chucks holders without Lh nut ER40 42 Collet chucks holders with Lh nut ORT25A 42 Collet chucks holders without Lh nut ORT25A 42 Collet chucks holders with nut TG75 Collet chucks holders with nut TG100

L 58,5

D 63

58,5

For all machinery with ISO 30 BT shank without drugging cuts and for american machinery with 2 holes on flange.

For â&#x20AC;&#x153;Shodaâ&#x20AC;?

For collets see page from 72 to 79

Special tool holders are made on request

Tool holders ISO 30 with Flange with embedded nut Collet chucks holders capacity 3/20 for Collets ER32 - 3/30 ER40 Code W512BT W523BT

Description Collet chucks holders with emboded nut Collet chucks holders with emboded nut

Collet Type L1 ER32 56 ER40 56

For â&#x20AC;&#x153;Shodaâ&#x20AC;?

For collets see page from 72 to 79

Special tool holders are made on request

L 60 60

D 50 63

Tool holders ISO 30 with Flange BT Mill holder arbor diameter 30 - 1” 1/4 Code W542BT W544BT W546BT W548BT W550BT

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203 80

D 30 30 30 30 1” 1/4

L 93 103 123 203

D 35 35 35 35

L 93 103 123 203 200

D 40 40 40 40 46

Mill holder arbor diameter 35 Code W552BT W554BT W556BT W558BT

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

Mill holder arbor diameter 40 Code W562BT W564BT W566BT W568BT W568BT

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Black Bars

For all machinery with ISO 30 BT shank without drugging cuts and for american machinery with 2 holes on flange.

For “Shoda”

RECESSED END CAP

Blocking type specifications are always needed FLANGED END CAP

Special tool holders are made on request

Tool holders ISO 30 with Flange BT Morse taper adapter Code W572BT W574BT W576BT

CM 1 2 3

L 60 90 90

For all machinery with ISO 30 BT shank without drugging cuts and for american machinery with 2 holes on flange. For “Shoda”

Thread

Mill holder Weldon DIN 1835 Code W582BT W583BT W584BT W586BT W588BT W590BT W592BT W593BT W594BT W595BT W596BT

d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1”

D 25 28 35 42 48 52 65 25 42 52 65

L 70 70 70 70 70 70 110 70 70 70 110

For “Shoda”

Tool holders ISO 30 with Flange ø 46 Type “CMS” Collet chucks holders capacity 3/20 for Collets ER32 - ITS32 Code W507FL46 W508FL46 W514FL46 W515FL46 W507FL46ETS W508FL46ETS W514FL46ETS W515FL46ETS

Description Collet Type Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32 Collet chucks holders with nut ITS32 Collet chucks holders without nut ITS32 Collet chucks holders with Lh nut ITS32 Collet chucks holders without Lh nut ITS32 For “CMS” For collets see page from 72 to 79

Special tool holders are made on request

L1 43 43 43 43 43 43 43 43

L 55,5

D 50

55,5

Tool holders ISO 30 with Flange ø 46 Type “CMS” Collet chucks holders capacity 3/30 for Collets ER40 - 3/25 for Collets ORT 25A - ITS40 Code W522CFL46 W524CFL46 W526CFL46 W528CFL46 W532CFL46 W534CFL46 W536CFL46 W538CFL46 W522CFL46 W524CFL46 W532CFL46 W534CFL46

ITS ITS ITS ITS

Description Collet Type Collet chucks holders with nut ER40 Collet chucks holders without nut ER40 Collet chucks holders with nut ORT25A Collet chucks holders without nut ORT25A Collet chucks holders with Lh nut ER40 Collet chucks holders without Lh nut ER40 Collet chucks holders with Lh nut ORT25A Collet chucks holders without Lh nut ORT25A Collet chucks holders with nut ITS40 Collet chucks holders without nut ITS40 Collet chucks holders with Lh nut ITS40 Collet chucks holders without Lh nut ITS40

For “CMS”

For collets see page from 72 to 79

Special tool holders are made on request

L1 60 60 60 60 60 60 60 60 60 60 60 60

L 76,5

D 63

76,5

Tool holders ISO 30 with Flange ø 46 Type “CMS”

Mill holder arbor diameter 30 - 1” 1/4 Code W541FL46 W542FL46 W544FL46 W546FL46 W548FL46 W550FL46

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 73 93 103 123 203 80

D 30 30 30 30 30 1“ 1/4

Mill holder arbor diameter 35 Code W551FL46 W552FL46 W554FL46 W556FL46 W558FL46

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 73 93 103 123 203

D 35 35 35 35 35

L 73 93 103 123 203

D 40 40 40 40 40

Mill holder arbor diameter 40 Code W561FL46 W562FL46 W564FL46 W566FL46 W568FL46

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

For “CMS”

Blocking type specifications are always needed

RECESSED END CAP

FLANGED END CAP

Special tool holders are made on request

Tool holders ISO 30 with Flange ø 58 Type “ESSETEAM” - UNITEAM - tekna Collet chucks holders capacity 3/20 for Collets ER32 Code W507FL58 W508FL58 W514FL58 W515FL58

Description Collet Type Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32

L1 43 43 43 43

L 55,5

D 50

55,5

For collets see page from 72 to 79

Collet chucks holders capacity 3/30 for Collets ER40 - 3/25 for Collets ORT 25 Code W522CFL58 W524CFL58 W526CFL58 W528CFL58 W532CFL58 W534CFL58 W536CFL58 W538CFL58

Collet Type ER40 ER40 ORT25A ORT25A ER40 ER40 ORT25A ORT25A

For collets see page from 72 to 79

Special tool holders are made on request

L1 60 60 60 60 60 60 60 60

L 76,5

D 63

76,5

Tool holders ISO 30 with Flange ø 58 Type “ESSETEAM”- UNITEAM - tekna Mill holder arbor diameter 30 - 1” 1/4 Code W541FL58 W542FL58 W544FL58 W546FL58 W548FL58 W548F

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 73 93 103 123 203 80

D 30 30 30 30 30 1“ 1/4

L 73 93 103 123 203

D 35 35 35 35 35

Mill holder arbor diameter 35 Code W541FL58 W552FL58 W554FL58 W556FL58 W558FL58

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

Mill holder arbor diameter 40 Code W562FL58 W562FL58 W564FL58 W566FL58 W568FL58

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 73 93 103 123 203

D 40 40 40 40 40

For “ESSETEAM”

Blocking type specifications are always needed

RECESSED END CAP

FLANGED END CAP

Special tool holders are made on request

Tool holders ISO 35 with Flange BT Collet chucks holders capacity 2/20 for Collets ER32 Cod W5075BT W5085BT W5145BT W5155BT W5165BT W5185BT W5195BT W5205BT

Description Collet Type Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32 Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32

L1 43 43 43 43 54 54 54 54

L 56

D 50

For all machinery with ISO 30 BT shank without drugging cuts and for american machinery with 2 holes on flange. For collets see page from 72 to 79

Collet chucks holders capacity 3/25 for Collets ER40 - ORT Code W5225BT W5245BT W5265BT W5285BT W5325BT W5345BT W5365BT W5385BT W5386BT-TG75 W5386BT-TG100 W5386BT-TG150

Description Collet Type Collet chucks holders with nut ER40 Collet chucks holders without nut ER40 Collet chucks holders with nut ORT25A Collet chucks holders without nut ORT25A Collet chucks holders with Lh nut ER40 Collet chucks holders without Lh nut ER40 Collet chucks holders with Lh nut ORT25A Collet chucks holders without Lh nut ORT25A Collet chucks holders with nut TG75 Collet chucks holders with nut TG100 Collet chucks holders with nut TG150

For all machinery with ISO 35 BT shank without drugging cuts and for american machinery with 2 holes on flange.

For collets see page from 72 to 79

Special tool holders are made on request

L1 42 42 42 42 42 42 42 42

L 60

D 63

Tool holders ISO 35 with Flange BT Mill holder arbor diameter 30 - 1â&#x20AC;? 1/4 Code W5425BT W5445BT W5465BT W5485BT W5505BT

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203 80

D 30 30 30 30 1â&#x20AC;&#x153; 1/4

Mill holder arbor diameter 35 Code W5525BT W5545BT W5565BT W5585BT

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 35 35 35 35

L 93 103 123 203

D 40 40 40 40

Mill holder arbor diameter 40 Code W5625BT W5645BT W5665BT W5685BT

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

For all machinery with ISO 35 BT shank without drugging cuts and for american machinery with 2 holes on flange.

Blocking type specifications are always needed

RECESSED END CAP

FLANGED END CAP

Special tool holders are made on request

Tool holders ISO 35 with Flange BT For all machinery with ISO 35 BT shank without drugging cuts and for american machinery with 2 holes on flange.

Morse taper adapter Code W5725BT W5745BT W5765BT

CM 1 2 3

L 60 90 90

Mill holder Weldon DIN 1835 Code W5825BT W5835BT W5845BT W5865BT W5885BT W5905BT W5924BT W5926BT W5927BT W5928BT

6 8 10 12 16 20 1/4” 1/2” 3/4” 1”

25 28 35 42 48 52 25 42 52 65

70 70 70 70 70 70 70 70 70 70

Thread

Tool holders ISO 40 with Flange DIN 69871 Collet chucks holders capacity 3/20 for Collets ER32 Code W602 W604 W606 W608

Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut

Collet Type ER32 ER32 ER32 ER32

L1 L D 60 72,5 50 60 60 72,5 50 60

Collet chucks holders capacity 3/30 for Collets ER40 - 3/25 for Collets ORT Code W622 W624 W626 W628 W630 W632 W634 W636

Collet Type ER40 ER40 ORT25A ORT25A ER40 ER40 ORT25A ORT25A

L1 60 60 60 60 60 60 60 60

L D 76,5 63 76,5 60 76,5 63 76,5 60

For collets see page from 72 to 79

Special tool holders are made on request

Tool holders ISO 40 with Flange DIN 69871 Mill holder arbor diameter 30 - 1â&#x20AC;? 1/4 Code W642 W644 W646 W648 W650

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203 80

D 30 30 30 30 1â&#x20AC;? 1/4

Mill holder arbor diameter 35 Code W642 W644 W646 W648

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 35 35 35 35

L 93 103 123 203 200

D 40 40 40 40 63

Mill holder arbor diameter 40 Code W662 W664 W666 W668 W679

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Blackbers

Arbors are supplied with reduced blocked Blocking type specifications are always needed

RECESSED END CAP

FLANGED END CAP

Special tool holders are made on request

Tool holders ISO 40 with Flange DIN 69871 Morse taper adapter Code W672 W674 W676 W678

CM 1 2 3 4

L 60 90 90 110

Thread

Mill holder Weldon DIN 1835 Code W682 W683 W684 W686 W688 W690 W691 W692 W693 W694 W695

d 6 8 10 12 16 20 25 1/4 1/2” 3/4” 1”

D 25 28 35 42 48 52 65 25 42 52 65

L 70 70 70 70 70 70 110 70 70 70 110

Special tool holders are made on request

Tool holders ISO 40 DIN 69871/A shirink Fit chucks Code W6001 W6002 W6003 W6004 W6005 W6006 W6007 W6008 W6009 W6010 W6011 W6012 W6013 W6014 W6015 W6016 W6017

D 3 4 5 6 8 10 12 14 16 18 20 25 32 1/4“ 1/2“ 3/4“ 1“

L 80 80 80 80 80 80 80 80 80 80 80 100 100 80 80 80 100

Code W6018 W6019 W6020 W6021 W6022 W6023 W6024 W6025 W6026 W6027 W6028 W6029 W6030 W6031 W6032 W6033 W6034

D 3 4 5 6 8 10 12 14 16 18 20 25 32 1/4“ 1/2“ 3/4“ 1“

L 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120

Code W6035 W6036 W6037 W6038 W6039 W6040 W6041 W6042 W6043 W6044 W6045 W6046 W6047 W6048 W6049 W6050 W6051

Special tool holders are made on request

D 3 4 5 6 8 10 12 14 16 18 20 25 32 1/4“ 1/2“ 3/4“ 1“

L 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160

Tool holders ISO 40 with Flange ø 58 Type “ESSETEAM” Collet chucks holders capacity 3/20 for Collets ER32 Code W602FL58 W604FL58 W606FL58 W608FL58

Description Collet Type Collet chucks holders with nut ER32 Collet chucks holders without nut ER32 Collet chucks holders with Lh nut ER32 Collet chucks holders without Lh nut ER32

L1 66 66 66 66

L 72,5

D 50 50

72,5

Collet chucks holders capacity 3/30 for Collets ER40 - 3/25 ORT Code W622FL58 W624FL58 W626FL58 W628FL58 W630FL58 W632FL58 W634FL58 W636FL58

Collet Type ER40 ER40 ORT25A ORT25A ER40 ER40 ORT25A ORT25A

For collets see page from 72 to 79

Special tool holders are made on request

L1 60 60 60 60 60 60 60 60

L 76,5

D 63

76,5

Tool holders ISO 40 with Flange ø 58 Type “ESSETEAM” Mill holder arbor diameter 30 - 1” 1/4 Code W642FL58 W644FL58 W646FL58 W648FL58 W650FL58

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203 80

D 30 30 30 30 1“ 1/4

Mill holder arbor diameter 35 Code W652FL58 W654FL58 W656FL58 W658FL58

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 35 35 35 35

L 93 103 123 203

D 40 40 40 40

Mill holder arbor diameter 40 Code W662FL58 W664FL58 W666FL58 W668FL58

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

Arbors are supplied with reduced blocked Blocking type specifications are always needed RECESSED END CAP

FLANGED END CAP

Special tool holders are made on request

Tool holders with threaded nut Collet chucks holders capacity 3/20 ER32, 3/20 ITS32, 3/30 for Collets ER40, 3/30 ITS40 Code W732 W734 W736 W738 W732 W734 W736 W738

ITS ITS ITS ITS

Description Collet chucks holders ER32 Collet chucks holders ER32 Collet chucks holders ER40 Collet chucks holders ER40 Collet chucks holders ITS32 Collet chucks holders ITS32 Collet chucks holders ITS40 Collet chucks holders ITS40

Type Lh Lh Lh Lh

D 50 50 63 63 50 50 63 63

For “CMS”

Nut Code 749

For collets see page from 72 to 79 The nut has to be ordered separately

Special tool holders are made on request

Capacity 3/20 3/20 3/26 3/26 3/20 3/20 3/26 3/26

Tool holders with threaded nut Mill holder arbor diameter 30 - 1” 1/4 Code W742 W744 W746 W748 W750

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203 80

D 30 30 30 30 1“ 1/4

Mill holder arbor diameter 35 Code W752 W754 W756 W758

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 35 35 35 35

Mill holder arbor diameter 40 Code W762 W764 W766 W768

Description Mill holder arbor Mill holder arbor Mill holder arbor Mill holder arbor

L 93 103 123 203

D 40 40 40 40

For “CMS”

Blocking type specifications are always needed The nut has to be ordered separately

RECESSED END CAP

FLANGED END CAP

Special tool holders are made on request

Tool holders with threaded nut Morse taper adapter Code W772 W774 W776 W777

CM 1 2 3 4

L 60 90 90 110

For “CMS”

Thread

The nut has to be ordered separately

Mill holder Weldon DIN 1835 Code W782 W783 W784 W786 W788 W790 W791 W792 W793 W794 W795

d 6 8 10 12 16 20 25 1/4” 1/2” 3/4” 1”

D 25 28 35 42 48 52 65 25 42 52 65

L 70 70 70 70 70 70 110 70 70 70 110

For “CMS”

The nut has to be ordered separately Special tool holders are made on request

Tool holders with morse taper Collet chucks holders capacity 3/20 for Collets ER32 Cod W904 W906 W908 W910 Cod W905 W907 W909 W911 Cod W914 W916 W918 W920

Collet C.M. Thread D1 Type Collet chucks holders with nut ER32 2 A 18 Collet chucks holders without nut ER32 2 A 18 Collet chucks holders with Lh nut ER32 2 A 18 Collet chucks holders without Lh nut ER32 2 A 18 Collet Description C.M. Thread D1 Type Collet chucks holders with nut ER32 2 B 18 Collet chucks holders without nut ER32 2 B 18 Collet chucks holders with Lh nut ER32 2 B 18 Collet chucks holders without Lh nut ER32 2 B 18 Collet Description C.M. Thread D1 Type Collet chucks holders with nut ER32 3 B 24,1 Collet chucks holders without nut ER32 3 B 24,1 Collet chucks holders with Lh nut ER32 3 B 24,1 Collet chucks holders without Lh nut ER32 3 B 24,1 Description

45 45 45 45

55 55 55 55

50 50 50 50

45 45 45 45

55 55 55 55

50 50 50 50

45 45 45 45

55 55 55 55

50 50 50 50

60 60 60 60

70 70 70 70

63 63 63 63

Collet chucks holders capacity 3/30 for Collets ER40 – 3/25 ORT Cod W922 W924 W926 W928

Description Collet chucks holders with nut Collet chucks holders without nut Collet chucks holders with Lh nut Collet chucks holders without Lh nut

Collet C.M. Thread D1 Type ER32 3 B 24,1 ER32 3 B 24,1 ORT25 3 B 24,1 ORT25 3 B 24,1

Thread A: ø20 x 14 fil. x 1’ Thread B: M30 x 1,5

Threads for left rotation are made on request

For collets see page from 72 to 79

Special tool holders are made on request

Thread

Tool holders with morse taper Mill holder arbor diameter 30 Cod W940 W941 W942 W944 W946 W948

Description C.M. Thread Albero Mill holder 2 A Albero Mill holder 2 B Albero Mill holder 2 B Albero Mill holder 2 B Albero Mill holder 2 B Albero Mill holder 2 B

D1 18 18 18 18 18 18

L 93 93 93 103 123 203

D 30 30 30 30 30 30

Description C.M. Thread D1 Albero Mill holder 2 A 18 Albero Mill holder 2 B 18 Albero Mill holder 3 B 24,1 Albero Mill holder 3 B 24,1 Albero Mill holder 3 B 24,1 Albero Mill holder 3 B 24,1

L 93 93 93 103 123 203

D 40 40 40 40 40 40

L 93 93 93 103 123 203

D 40 40 40 40 40 40

Mill holder arbor diameter 35 Cod W950 W951 W952 W954 W956 W958

Mill holder arbor diameter 40 Cod W960 W961 W962 W964 W966 W968

Description C.M. Thread D1 Albero Mill holder 2 A 18 Albero Mill holder 2 B 18 Albero Mill holder 3 B 24,1 Albero Mill holder 3 B 24,1 Albero Mill holder 3 B 24,1 Albero Mill holder 3 B 24,1

Thread

Thread A: Ă¸20 x 14 fil. x 1â&#x20AC;&#x2122; Thread A: M30 x 1,5 Threads for left rotation are made on request Blocking type specifications are always needed

RECESSED END CAP

FLANGED END CAP

Special tool holders are made on request

Nut with double thread Nut with double thread Code Thread M1 Thread M2 W979 M34 x 2,5 M30 x 1,5 W981 M34 x 2,5 W20 x 14 W970 M33 x 3 M30 x 1,5 W977 M33 x 3 W20 x 14 W973 M34 x 3 M30 x 1,5 W975 M34 x 3 W20 x 14

L 35 35 35 35 35 35

D 45 45 45 45 45 45

Threads for left rotation are made on request

Tool holders Paolino Bacci - ER Collet chucks holders capacity 3/20 for Collets ER32 - 3/30 ER40 Code W101-PB W102-PB W103-PB

Description Collet chucks holders Collet chucks holders Collet chucks holders

Code W990D-PB W990S-PB W993D-PB W993S-PB

Description Nut - ER32DX Nut - ER32SX Nut - ER40DX Nut - ER40SX -

ER-A 32 40 40

ER-B 20 20 25

Special tool holders are made on request

L 80 80 80

D 25 25 30

Collet holder cylindrical shank Collet chucks holders capacity 1/10 ER16 Code W722 W724

Description Collet chucks holders ER16 Collet chucks holders ER16

Type Right Left

Capacity 1/10 1/10

Special tool holders are made on request

Drill holder with quick change Quick change spindle for drilling machinery “Biesse” Code SX W802 W806

DX W804 W808

d 10 10

D 20 20

L 37 30

Quick change spindle for drilling machinery “Morbidelli” Code SX W812 W816 W820

DX W814 W818 W822

d 10 10 M10

D 20 16 20

Quick change spindle for drilling machinery “Masterwood” “Maggi” “Griggio” Code DX W832

d 10

D 20

Quick change spindle for drilling machinery “Vitap” Code DX W842

d 10

D 18

Special tool holders are made on request

Drill holder with quick change Quick change spindle for drilling machinery “Busellato” Code DX W852

d 10

D 19

Quick change spindle for drilling machinery “Weeke” Code DX W862 W864 W866

d 10 10 10

D 20 20 20

L 46 46 66

Quick change spindle for drilling machinery XL 17.5

Code DX W872

d 10

D 20

Blocking screw 1V.011

Quick change spindle for drilling machinery “Ayen” “Holzoma” Code SX DX W882 W884

B 22.5

Special tool holders are made on request

Drill holder with quick change Quick change spindle for drilling machinery “Morbidelli” “Biesse” “Weeke” “Busellato” “Torwegge” Code SX W892

DX W894

B 22.5

Quick change spindle for drilling machinery “Vitap” “Alberti” Code SX W902

DX W904

B 25.5

Quick change spindle for drilling machinery “Nottmeyer” Code SX W912

DX W914

B 25.5

Quick change spindle for drilling machinery Code SX W922 sx W926 sx

DX W924 dx W928 dx

d 8 10

Special tool holders are made on request

Drill holder with quick change Quick change spindle for drilling machinery Code SX W932 W936

DX W934 W938

d 8 10

Quick change spindle for drilling machinery Code SX-LH DX W942 sx W944 dx W946 sx W948 dx

d 8 10

Quick change spindle for drilling machinery d 2 2.5 3 3.2 3.5 4 5

Code W952 W954 W956 W958 W960 W962 W964

Special tool holders are made on request

Reduction sleeve from ISO/DIN 69871/A with internal collet to hold HSK shanks Code WSK 40/40E WSK 50/50E WSK 40/63F WSK 50/63E WSK 40/63E

Description HSK 40 E HSK 50 E HSK 63 F HSK 63 E HSK 63 E

D 40 50 63 80 63

L 30 30 35 50 65

Digital height measuring device 1- Measuring range 12” / 300 mm 2- Counter zero-adjustment at any height within the measuring range 3- Precision 0,0005” / 0,01 mm 4- Selector in inches/millimeters

CONICAL CONNECTION ISO 10 ISO 15 ISO 20 ISO 25 ISO 30 ISO 35 ISO 40 ISO 50 HSK 25E HSK 32E HSK 40E HSK 50E HSK 50F HSK 63E HSK 63F HSK 80B Special tool holders are made on request

Cylindrical connection ER Collet Chucks with small nut Code W4001 W4002 W4003 W4004 W4005 W4006 W4007 W4008 W4009 W4010 W4011 W4012 W4013 W4014 W4015 W4016 W4017 W4018 W4019 W4020 W4021 W4022 W4023 W4024 W4025 W4026 W4027 W4028 W4029 W4030 W4031 W4032 W4033 W4034 W4035 W4036 W4037 W4038 W4039 W4040 W4041 W4042

D Collet Type 5 ER8M 1/4“ ER8M 1/4“ ER11M 7 ER11M 8 ER8M 8 ER8M 8 ER8M 8 ER8M 8 ER11M 8 ER11M 8 ER16M 8 ER16M 10 ER8M 10 ER8M 10 ER8M 10 ER8M 10 ER11M 10 ER11M 10 ER11M 10 ER11M 10 ER16M 10 ER16M 10 ER16M 1/2“ ER8M 1/2“ ER8M 1/2“ ER8M 1/2“ ER8M 1/2“ ER11M 1/2“ ER11M 1/2“ ER11M 1/2“ ER11M 1/2“ ER16M 1/2“ ER16M 1/2“ ER20M 15 ER32 16 ER11M 16 ER11M 16 ER11M 16 ER11M 16 ER11M 16 ER11M 16 ER11M

L 45 45 45 45 55 80 100 130 55 100 55 100 55 80 100 130 55 80 100 130 60 80 100 55 70 100 140 55 70 100 140 55 80 100 100 40 60 80 100 130 160 200

Code W4043 W4044 W4045 W4046 W4047 W4048 W4049 W4050 W4051 W4052 W4053 W4054 W4055 W4056 W4057 W4058 W4059 W4060 W4061 W4062 W4063 W4064 W4065 W4066 W4067 W4068 W4069 W4070 W4071 W4072 W4073 W4074 W4075 W4076 W4077 W4078 W4079 W4080 W4081 W4082 W4083 W4084

D Collet Type 16 ER16M 16 ER16M 16 ER16M 16 ER16M 16 ER16M 16 ER16M 16 ER16M 16 ER20M 16 ER20M 16 ER20M 16 ER20M 3/4” ER11M 3/4” ER11M 3/4” ER16M 3/4” ER16M 3/4” ER20M 3/4” ER20M 3/4” ER25M 3/4” ER25M 20 ER11M 20 ER11M 20 ER11M 20 ER11M 20 ER11M 20 ER16M 20 ER16M 20 ER16M 20 ER16M 20 ER16M 20 ER16M 20 ER20M 20 ER20M 20 ER20M 20 ER20M 20 ER20M 20 ER20M 20 ER20M 20 ER25M 20 ER25M 20 ER25M 20 ER25M 20 ER25M

L 35 60 80 100 130 160 200 55 100 130 160 50 100 60 100 50 100 50 100 50 100 130 160 200 60 100 130 160 200 250 46 60 100 130 160 200 250 46 60 100 130 160

Special tool holders are made on request

Code W4085 W4086 W4087 W4088 W4089 W4090 W4091 W4092 W4093 W4094 W4095 W4096 W4097 W4098 W4099 W4100 W4101 W4102 W4103 W4104 W4105 W4106 W4107 W4108 W4109 W4110 W4111 W4112 W4113 W4114 W4115 W4116

D Collet Type 22 ER16 22 ER20 25 ER11 25 ER11 25 ER11 25 ER16 25 ER16 25 ER16 25 ER16 25 ER16 25 ER20 25 ER20 25 ER20 25 ER20 25 ER20 25 ER25 25 ER25 25 ER25 25 ER25 25 ER25 25 ER25 1“ ER16 1“ ER16 1“ ER16 1“ ER20 1“ ER20 1“ ER20 1“ ER25 1“ ER25 1“ ER25 32 ER16 32 ER20

L 80 80 100 130 160 60 100 130 160 200 60 100 130 160 200 50 70 100 130 160 200 60 100 140 70 100 140 70 100 140 90 90

Cylindrical connection ER Collet Chucks with standard nut Code W4117 W4118 W4119 W4120 W4121 W4122 W4123 W4124 W4125 W4126 W4127 W4128 W4129 W4130 W4131 W4132 W4133 W4134 W4135 W4136 W4137 W4138 W4139 W4140 W4141 W4142 W4143 W4144 W4145 W4146 W4147 W4148 W4149 W4150 W4151 W4152 W4153 W4154 W4155 W4156 W4157 W4158

D Collet Type 1/4” ER16 1/2“ ER16 1/2“ ER16 1/2“ ER16 1/2“ ER16 1/2“ ER16 1/2“ ER16 1/2“ ER20 1/2“ ER25 1/2“ ER25 3/4“ ER16 3/4“ ER16 3/4“ ER20 3/4“ ER20 3/4“ ER25 3/4“ ER25 3/4“ ER32 3/4“ ER32 20 ER16 20 ER16 20 ER16 20 ER16 20 ER16 20 ER20 20 ER20 20 ER20 20 ER20 20 ER20 20 ER20 20 ER25 20 ER25 20 ER25 20 ER25 20 ER32 20 ER32 20 ER32 20 ER32 22 ER16 22 ER20 22 ER25 22 ER25 22 ER32

L 60 60 80 100 130 160 200 60 35 70 50 100 50 100 50 100 50 100 50 100 130 160 200 46 60 100 130 160 200 50 100 130 160 50 100 130 160 80 80 50 80 50

Code D Collet Type W4159 25 ER16 W4160 25 ER16 W4161 25 ER16 W4162 25 ER16 W4163 25 ER16 W4164 25 ER20 W4165 25 ER20 W4166 25 ER20 W4167 25 ER20 W4168 25 ER25 W4169 25 ER25 W4170 25 ER25 W4171 25 ER25 W4172 25 ER25 W4173 25 ER32 W4174 25 ER32 W4175 25 ER32 W4176 25 ER32 W4177 25 ER32 W4178 25 ER40 W4179 25 ER40 W4180 1” ER16 W4181 1” ER16 W4182 1” ER20 W4183 1” ER20 W4184 1” ER25 W4185 1” ER25 W4186 1” ER25 W4187 1” ER25 W4188 1” ER32 W4189 1” ER32 W4190 1” ER32 W4191 1” ER32 W4192 1” ER40 W4193 30 ER25 W4194 30 ER32 W4195 30 ER40 W4196 1”1/4 ER32 W4197 1”1/4 ER40

L 60 100 130 160 200 60 100 130 160 50 70 100 130 160 50 70 100 130 160 50 100 60 100 60 100 50 70 100 140 50 70 100 140 50 50 50 50 50 50

Special tool holders are made on request

Code W4198 W4199 W4200 W4201 W4202 W4203 W4204 W4205 W4206 W4207 W4208 W4209 W4210 W4211 W4212 W4213 W4214 W4215 W4216 W4217 W4218 W4219 W4220 W4221 W4222 W4223 W4224 W4225 W4226 W4227 W4228 W4229 W4230 W4231 W4232 W4233 W4234

D Collet Type 32 ER16 32 ER16 32 ER20 32 ER20 32 ER25 32 ER25 32 ER25 32 ER25 32 ER32 32 ER32 32 ER32 32 ER32 32 ER32 32 ER40 32 ER40 32 ER40 32 ER40 35 ER32 40 ER25 40 ER25 40 ER32 40 ER32 40 ER32 40 ER32 40 ER40 40 ER40 40 ER40 44,45 ER32 44,45 ER32 44,45 ER32 44,45 ER40 50 ER32 50 ER32 50 ER40 50 ER40 2“ ER32 2“ ER40

L 100 150 100 150 70 100 120 150 50 70 100 120 150 50 70 100 130 80 70 120 70 100 130 160 50 80 130 80 125 160 160 125 160 125 160 125 160

Collets Capacity 1/5 - 1/7 - 1/10 - 1/13 Type ER 8 - 11 -16 - 20 DIN 6499/B

ER8 Code Cap. 1/5

ER11 D

Code Cap. 1/7

ER16 D

Code Cap. 1/10

ER20 L

Code Cap. 1/13

Range

99801A

8,5 13,5 99812N

11,5 18 99832A

17 27,5 99866A

21 31,5 1

99802B

8,5 13,5 99813P

11,5 18 99833Z

17 27,5 99867B

21 31,5 1,5-1

99803C

8,5 13,5 99814R

11,5 18 99834B

17 27,5 99868B

21 31,5 2-1,5

99804D

8,5 13,5 99815S

11,5 18 99835W

17 27,5 99869B

21 31,5 2.5-2

99805E

8,5 13,5 99816T

11,5 18 99836C

17 27,5 99870C

21 31,5 3-2,5

99806F

8,5 13,5 99817V

11,5 18 99837V

17 27,5 99871Z

21 37,5 3,5-3

99807G

8,5 13,5 99818W

11,5 18 99838D

17 27,5 99872D

21 31,5 1-3,5

99808H

8,5 13,5 99819Z

11,5 18 99839X

17 27,5 99873W

21 31,5 4,5-4

99809L

8,5 13,5 99820A

11,5 18 99840E

17 27,5 99874E

21 31,5 54,5

99821B

11,5 18 99841T

17 27,5 99875V

21 31,5 5,5-5

99822C

11,5 18 99842F

17 27,5 99876F

21 31,5 6-5,5

99823D

11,5 18 99843S

17 27,5 99877K

21 31,5 6,5-6

99824E

11,5 18 99844G

17 27,5 99878G

21 31,5 7-6,5

99845R

17 27,5 99879T

21 31,5 7,5-7

99846H

17 27,5 99880H

21 31,5 8-7,5

998479

17 27,5 99881S

21 31,5 8,5-8

99848L

17 27,5 99882L

21 31,5 9-8,5

99849N

17 27,5 99883R

21 31,5 9,5-9

99850M

17 27,5 99884H

21 31,5 10-9,5

99885P

21 31,5 10,5-10

99886N

21 31,5 11-10,5

99887M

21 31,5 11,5-11

99888P

21 31,5 12-11,5

99889L

21 31,5 12,5-12

99890Q

21 31,5 13-12,5

Special tool holders are made on request

Collets Capacity 3/16 - 3/20 - 3/26 Type ER 25 - 32 -40 DIN 6499/B

ER25 Code Cap. 3/16

ER32

ER40

Code Cap. 3/20

99901A

99816S

40 -

99902B

99817T

99903C

99818V

99904D

99905E

99906F

Code Cap. 3/26

Range

3-2

40 99936V

4-3

40 99937Z

5-4

99819Z

40 99938A

6-5

99820A

40 99939J

7-6

99821B

40 99940B

8-7

99907G

99822C

40 99941C

9-8

99908H

99823D

40 99942D

10-9

99909L

99824E

40 99943E

11-10

99910M

99825F

40 99944F

12-11

99911N

99826G

40 99945G

13-12

99912P

99827H

40 99946H

14-13

99913Q

99828L

40 99947L

15-14

99914R

99829M

40 99948M

16-15

99830N

40 99949N

17-16

99831P

40 99950P

18-17

99832Q

40 99951Q

19-18

99833R

40 99952R

20-19

99953S

21-20

99954T

22-21

99955V

23-22

99956Z

24-23

99957W

25-24

99959A

26-25

Special tool holders are made on request

ER Precision Collets inch size D = 8,5 D = 13,5 ER8 IER8-132 IER8-364 IER8-116 IER8-332 IER8-18 IER8-532 IER8-316 IER8-732

11,5 18 ER11 IER11-132 IER11-364 IER11-116 IER11-332 IER11-18 IER11-532 IER11-316 IER11-732 IER11-14

17 27,5 ER16 IER16-132 IER16-364 IER16-116 IER16-332 IER16-18 IER16-532 IER16-316 IER16-732 IER16-14 IER16-932 IER16-516 IER16-1132 IER16-38 IER16-1332

21 31,5 ER20 IER20-132 IER20-364 IER20-116 IER20-332 IER20-18 IER20-532 IER20-316 IER20-732 IER20-14 IER20-932 IER20-516 IER20-1132 IER20-38 IER20-1332 IER20-716 IER20-1532 IER20-12

26 35 ER25 IER25-364 IER25-116 IER25-332 IER25-18 IER25-532 IER25-316 IER25732 IER25-14 IER25-932 IER25-516 IER25-1132 IER25-38 IER25-1332 IER25-716 IER25-1532 IER25-12 IER25-1732 IER25-916 IER25-1932 IER25-58

33 40 ER32

IER32-332 IER32-18 IER32-532 IER32-316 IER32-732 IER32-14 IER32-932 IER32-516 IER32-1132 IER32-38 IER32-1332 IER32-716 IER32-1532 IER32-12 IER32-1732 IER32-916 IER32-1932 IER32-58 IER32-2132 IER32-1116 IER32-2332 IER32-34 IER32-2832 IER32-1316

41 46 ER40

IER40-18 IER40-532 IER40-316 IER40-732 IER40-14 IER40-932 IER40-516 IER40-1132 IER40-38 IER40-1332 IER40-716 IER40-1532 IER40-12 IER40-1732 IER40-916 IER40-1932 IER40-58 IER40-2132 IER40-1116 IER40-2332 IER40-34 IER40-2832 IER40-1316 IER40-2732 IER40-78 IER40-2932 IER40-1516 IER40-3132 IER40-1

Special tool holders are made on request

Range .02 - .004” .03 - .005” .043 - .062” .054- .093” .086 - .125” .117-156” .148 - .187” .179- .218” .211 - .250” .242 - .281” .273 - .312” .304 - .343” .336 - .375” .367 - .406” .398 - .437” .429 - .468” .461 - .500” .492 - .531” .523 - .562” .554 - .593” .586- .625” .617 - .656” .648 - .687” .679 - .718” .711 - .750” .836 - .875” .961 - 1.00”

d 1/32” 3/64” 1/16” 3/32” 1/8” 5/32” 3/16” 7/32” 1/4” 9/32” 5/16” 11/32” 3/8” 13/32” 7/16” 15/32” 1/2” 17/32” 9/16” 19/32” 5/8” 21/32” 11/16” 23/32” 3/4” 28/32” 13/16” 27/32” 7/8” 29/32” 15/16” 31/32” 1”

Collets Type I-TS

Code

I-TS 16 D

Code

I-TS 20 D

Code

I-TS 25 D B L

Code

I-TS 32 D

Code

I-TS 40 D

Capacity

I-TS 16-2

17 13.6 24 I-TS 20-2

21 17 30.5 I-TS 25-2

26 21 34

I-TS 16-3

17 13.6 24 I-TS 20-3

21 17 30.5 I-TS 25-3

26 21 34 I-TS 32-3

33 27.2 40

I-TS 16-4

17 13.6 24 I-TS 20-4

21 17 30.5 I-TS 25-4

26 21 34 I-TS 32-4

33 27.2 40 I-TS 40-4

41 32 46

4–3

I-TS 16-5

17 13.6 24 I-TS 20-5

21 17 30.5 I-TS 25-5

26 21 34 I-TS 32-5

33 27.2 40 I-TS 40-5

41 32 46

5–4

I-TS 16-6

17 13.6 24 I-TS 20-6

21 17 30.5 I-TS 25-6

26 21 34 I-TS 32-6

33 27.2 40 I-TS 40-6

41 32 46

6–5

I-TS 16-7

17 13.6 24 I-TS 20-7

21 17 30.5 I-TS 25-7

26 21 34 I-TS 32-7

33 27.2 40 I-TS 40-7

41 32 46

7–6

I-TS 16-8

17 13.6 24 I-TS 20-8

21 17 30.5 I-TS 25-8

26 21 34 I-TS 32-8

33 27.2 40 I-TS 40-8

41 32 46

8–7

I-TS 16-9

17 13.6 24 I-TS 20-9

21 17 30.5 I-TS 25-9

26 21 34 I-TS 32-9

33 27.2 40 I-TS 40-9

41 32 46

9–8

2–1 3–2

I-TS 16-10 17 13.6 24 I-TS 20-10 21 17 30.5 I-TS 25-10 26 21 34 I-TS 32-10 33 27.2 40 I-TS 40-10 41 32 46

10 – 9

I-TS 20-11 21 17 30.5 I-TS 25-11 26 21 34 I-TS 32-11 33 27.2 40 I-TS 40-11 41 32 46

11 – 10

I-TS 20-12 21 17 30.5 I-TS 25-12 26 21 34 I-TS 32-12 33 27.2 40 I-TS 40-12 41 32 46

12 – 11

I-TS 25-13 26 21 34 I-TS 32-13 33 27.2 40 I-TS 40-13 41 32 46

13 – 12

I-TS 25-14 26 21 34 I-TS 32-14 33 27.2 40 I-TS 40-14 41 32 46

14 – 13

I-TS 25-15 26 21 34 I-TS 32-15 33 27.2 40 I-TS 40-15 41 32 46

15 – 14

I-TS 25-16 26 21 34 I-TS 32-16 33 27.2 40 I-TS 40-16 41 32 46

16 – 15

I-TS 25-17 26 21 34 I-TS 32-17 33 27.2 40 I-TS 40-17 41 32 46

17 – 16

I-TS 32-18 33 27.2 40 I-TS 40-18 41 32 46

18 – 17

I-TS 32-19 33 27.2 40 I-TS 40-19 41 32 46

19 – 18

I-TS 32-20 33 27.2 40 I-TS 40-20 41 32 46

20 – 19

I-TS 40-21 41 32 46

21 – 20

I-TS 40-22 41 32 46

22 – 21

I-TS 40-23 41 32 46

23 – 22

I-TS 40-24 41 32 46

24 – 23

I-TS 40-25 41 32 46

25 – 24

I-TS 40-26 41 32 46

26 – 25

For “CMS” In Inch on demand

Special tool holders are made on request

ORT collets DIN 6388/A

ORT 20-A Code Collets ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT -

2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020

ORT 25-A

Code Collets

29,8 29,8 29,8 29,8 29,8 29,8 29,8 29,8 29,8 29,8 29,8 29,8 29,8 29,8 29,8 29,8 29,8 29,8 29,8 -

45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 -

ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT -

2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525

ORT 32-A

Code Collets

35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 35,5 -

52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52 -

ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT ORT

3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232

Special tool holders are made on request

43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7 43,7

60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

ORT DIN 6388/A Collets inch size ORT 20 IORT20-364 IORT20-116 IORT20-332 IORT20-18 IORT20-532 IORT20-316 IORT20-732 IORT20-14 IORT20-932 IORT20-516 IORT20-1132 IORT20-38 IORT20-1332 IORT20-716 IORT20-1532 IORT20-12 IORT20-1732 IORT20-916 IORT20-1932 IORT20-58

ORT 25 IORT25-332 IORT25-18 IORT25-532 IORT25-316 IORT25-732 IORT25-14 IORT25-932 IORT25-516 IORT25-1132 IORT25-38 IORT25-1332 IORT25-716 IORT25-1532 IORT25-12 IORT25-1732 IORT25-916 IORT25-1932 IORT25-58 IORT25-2132 IORT25-1116 IORT25-2332 IORT25-34 IORT25-2832 IORT25-1316

ORT 32

IORT32-14 IORT32-932 IORT32-516 IORT32-1132 IORT32-38 IORT32-1332 IORT32-716 IORT32-1532 IORT32-12 IORT32-1732 IORT32-916 IORT32-1932 IORT32-58 IORT32-2132 IORT32-1116 IORT32-2332 IORT32-34 IORT32-2832 IORT32-1316 IORT32-2732 IORT32-78 IORT32-2932 IORT32-1516 IORT32-3132 IORT32-1 IORT32-114

Inch - Size 3/64” 1/16” 3/32” 1/8” 5/32” 3/16” 7/32” 1/4” 9/32” 5/16” 11/32” 3/8” 13/32” 7/16” 15/32” 1/2” 17/32” 9/16” 19/32” 5/8” 21/32” 11/16” 23/32” 3/4” 28/32” 13/16” 27/32” 7/8” 29/32” 15/16” 31/32” 1” 1” 1/4

Special tool holders are made on request

Range .02 - .004” .03 - .005” .043 - .062” .054 - .093” .086 - .125” .117 - .156” .148 - .187” .179 - .218” .211 - .250” .242 - .281” .273 - .312” .304 - .343” .336 - .375” .367 - .406” .398 - .437” .429 - .468” .461 - .500” .492 - .531” .523 - .562” .554 - .593” .586- .625” .617 - .656” .648 - .687” .679 - .718” .711 - .750” .836 - .875” .961 - 1.00”

CNC Woodworking Collets SHODA Collets Old Style Code W0S-0,250 W0S-0,312 W0S-0,375 W0S-0,500 W0S-0,625

Description 20 mm odl style 1/4” 20 mm old style 5/16” 20 mm odl style 3/8” 20 mm old style 1/2” 20 mm odl style 5/8”

D 20 20 20 20 20

L 52 52 52 52 52

d 0,250” 0,312” 0,375 0,500” 0,625”

D 16 16 16 16 16 16 16

L 52 52 52 52 52 52 52

d 0,125” 0,187” 0,250” 0,312” 0,375” 0,500” 10 mm

D 24 24 24 24 24 24 24 24

L 52 52 52 52 52 52 52 52

d 0,125” 0,250” 0,312” 0,375” 0,500” 0,625” 0,750” 10mm

D 23 23 23 23

L 40 40 40 40

d 0,250” 3/8” 10mm 1/2”

Collets Piggy Back Code WPB-0,125 WPB-0,187 WPB-0,250 WPB-0,312 WPB-0,375 WPB-0,500 WPB-10

Description Piggy back 1/8” collet Piggy back 3/16” Collet Piggy back 1/4” collet Piggy back 5/16” Collet Piggy back 3/8” collet Piggy back 1/2” Collet Piggy back 10 mm collet

Collets New Style Code WNS-0,125 WNS-0,250 WNS-0,312 WNS-0,375 WNS-0,500 WNS-0,625 WNS-0,750 WNS-10

Description 24 mm new style 1/8” 24 mm new style 1/4” 24 mm new style 5/16” 24 mm new style 3/8” 24 mm new style 1/2” 24 mm new style 5/8” 24 mm new style 3/4” 24 mm new style 10mm

Collets Old Style Code W0S-C-0,250 W0S-C-3/8 W0S-C-10 W0S-C-1/2

Description 30.000 rpm 30.000 rpm 30.000 rpm 30.000 rpm

Special tool holders are made on request

CNC Wood Collets Collets TG PRECISION 75-100-150 Code ITG75-14 ITG75-38 ITG75-12 ITG75-58 ITG75-34 ITG75-78 ITG75-1

Code ITG100-14 ITG100-38 ITG100-12 ITG100-58 ITG100-34 ITG100-78 ITG100-1

Code ITG150-14 ITG150-38 ITG150-12 ITG150-58 ITG150-34 ITG150-78 ITG150-1

D 1/4 3/8 1/2 5/8 3/4 7/8 1”

Other sizes available.

Nut TG

Code W1001 W1002 W1003

Description TG75 Collet Nut TG100 Collet Nut TG150 Collet Nut

D 1.88” 2.35” 2.35”

T 11/2-12” 17/8-12” 17/8-12”

L 0.94” 1.18” 1.41”

Special tool holders are made on request

Stiff quick change tap collets without overload protection Standard Group Tap holder d Code code 96818A 3.5 96820G 4 96822W 4.5 96824Y 6 96816Y 96826S 7 96828C 8 96830A 9 96832Y 10 96836U 7 96838E 8 96840L 9 96842A 10 11 96834S 96844C 96846E 12 96848Q 14 96850N 16 96852C 18 96856G 20 96854E 96858J 22

Square 2.7 3 3.4 4.9 5.5 6.2 7 8 5.5 6.2 7 8 8.5 9 11 12 14.5 16 18

Taper

M3 – M5 M3.5 M4 – M6 M5 – M8 17 M9 – M10 M11 M12 M10 – M12 M9 – M10 M11 M12 M10 – M12 M14 30 M16 M18 M20 M22 – M24 M27 30 M30

Tap holder D/d1 size

30/19

48/31

Quick change clutch tap collets with overload protection Standard Group Tap holder Code code 97018C 97020A 97022Y 97024S 97016S 97026U 97028E 97030C 97032S 97036W 97038G 97040N 97042C 97034U 97044E 97046G 97048J 97050Q 97052E

Square

Taper

3.5 4 4.5 6 7 8 9 10 7 8 9 10 11 12 14 16 18

2.7 3 3.4 4.9 5.5 6.2 7 8 5.5 6.2 7 8 8.5 9 11 12 14.5

M3 – M5 M3.5 M4 – M6 M5 – M8 M9 – M10 M11 M12 M10 – M12 M9 – M10 M11 M12 M10 – M12 M14 M16 M18 M20 M22 – M24

Tap holder size

D/d1

32/19

50/31

Special tool holders are made on request

Nut for Collet chucks holders ER 25-32-40 ORT 25A - Capacity 3/20 - 3/26 Right hand thread RH Nuts Code

Description

W985D W984D W986D W987D W987DE W988D W989D W990D W990DE W991D W992D W9920D-W W993D W993DE W994D W995D W995D-W W996D W997D W998D W998D-W

Standard nut Standard nut Prebalanced nut Standard nut Prebalanced nut Balanced nut Ball bearing nut Standard nut Prebalanced nut Balanced nut Ball bearing nut Ball bearing balanced nut Standard nut Prebalanced nut Balanced nut Ball bearing nut Ball bearing balanced nut Standard nut Balanced nut Ball bearing nut Ball bearing balanced nut

Collet Type

Capacity

ER20 ER16 ER16 ER25 ER25 ER25 ER25 ER32 ER32 ER32 ER32 ER32 ER40 ER40 ER40 ER40 ER40 ORT25A ORT25A ORT25A ORT25A

1/13 1/10 1/10 02/16 02/16 02/16 02/16 03/20 03/20 03/20 03/20 03/20 03/26 03/26 03/26 03/26 03/26 03/25 03/25 03/25 03/25

Collet Type

Capacity

ER20 ER16 ER16 ER25 ER25 ER25 ER25 ER32 ER32 ER32 ER32 ER32 ER40 ER40 ER40 ER40 ER40 ORT25A ORT25A ORT25A ORT25A

1/13 1/10 1/10 02/16 02/16 02/16 02/16 03/20 03/20 03/20 03/20 03/20 03/26 03/26 03/26 03/26 03/26 03/25 03/25 03/25 03/25

Left hand thread LH Nuts Code

Description

W985S W986S W986S W987S W987SE W988S W989S W990S W990SE W991S W992S W992S-W W993S W993SE W994S W995S W995S-W W996S W997S W998S W998S-W

For collets see page from 72 to 79

Special tool holders are made on request

Return ring nut Code M WGGER20DX-M M24X1 DX WGGER20SX-M M24X1 SX WGGER25DX-M M30X1 DX WGGER25SX-M M30X1 SX WGGER25DX M32X1.5 DX WGGER25SX M32X1.5 SX WGGER32DX M40X1.5 DX WGGER32SX M40X1.5 SX WGGER40DX M50X1.5 DX WGGER40SX M50X1.5 SX

D 30 30 35 35 42 42 50 50 63 63

H 5 5 5 5 8 8 10 10 10 10

Mini-nut Code W9514-DX W9534-DX W9554-DX W9574-DX W9514-SX W9534-SX W9554-SX W9574-SX W9514-DX-B W9534-DX-B W9554-DX-B W9574-DX-B W9514-SX-B W9534-SX-B W9554-SX-B W9574-SX-B

Description RH mini-nut RH mini-nut RH mini-nut RH mini-nut RH mini-nut RH mini-nut RH mini-nut RH mini-nut RH mini-nut RH mini-nut RH mini-nut RH mini-nut RH mini-nut RH mini-nut RH mini-nut RH mini-nut

Collet Type ER11 ER16 ER20 ER25 ER11 ER16 ER20 ER25 ER11 ER16 ER20 ER25 ER11 ER16 ER20 ER25

D 16 22 28 35 16 22 28 35 16 22 28 35 16 22 28 35

M M13x0,75 DX M19x1,00 DX M24x1,00 DX M30x1,00 DX M13x0,75 SX M19x1,00 SX M24x1,00 SX M30x1,00 SX M13x0,75 DX M19x1,00 DX M24x1,00 DX M30x1,00 DX M13x0,75 SX M19x1,00 SX M24x1,00 SX M30x1,00 SX

Special tool holders are made on request

L 12 18 19 20 12 18 19 20 12 18 19 20 12 18 19 20

Balanced balanced balanced balanced balanced balanced balanced balanced balanced

Nut Type I-TS and embedded solid nut Capacity 2/16 - 3/20 - 3/26 Code G 16 I-TS G 20 I-TS G 25 I-TS G 32 I-TS G 40 I-TS

Code W9991 W9992 W9993

A 32 35 42 50 63

B 15 16.5 18.5 22 25

C M22x1.5 M25x1.5 M32x1.5 M40x1.5 M50x1.5

Description Embedded nut Embedded nut Embedded nut

Collet Type Capacity ER25 02/16 ER32 03/20 ER40 03/26

Shoda nut Code W1010-20 W1011 W1012 W1013

Description Nut Shoda-20 Nut Piggyback Nut N.T. Nut O.T.

D 41 36 46 36

L 30 30 30 15

Special tool holders are made on request

Hermetic nut for collet chuck capacity 2/16 3/20 Code W5830 W5831 W5832 W5833 W5834 W5835 W5836 W5837 W5838 W5839 W5840 W5841

Description Standard nut Prebalanced nut Balanced nut Ball bearing nut Standard nut Prebalanced nut Balanced nut Ball bearing nut Standard nut Prebalanced nut Balanced nut Ball bearing nut

Collet Type ER25 ER25 ER25 ER25 ER32 ER32 ER32 ER32 ER40 ER40 ER40 ER40

Capacity 02/16 02/16 02/16 02/16 03/20 03/20 03/20 03/20 06/25 06/25 06/25 06/25

Capacity Disks Code

WER16D4 WER16D4,5 WER16D5,0 WER16D5,5 WER16D6,0 WER16D6,5 WER16D7,0 WER16D7,5 WER16D8,0 WER16D8,5 WER16D9,0 WER16D9,5 WER16D10,0 WER16D10,5 WER20D11,0 WER20D11,5 WER20D12,0 WER20D12,5 WER20D13,0

Cap.

4,0-3,5 4,5-4,0 5,0-4,5 5,5-5,0 6,0-5,5 6,5-6,0 7,0-6,5 7,5-7,0 8,0-7,5 8,5-8,0 9,0-8,5 9,5-9,0 10,0-9,5 10,5-10,0 11,0 - 10,5 11,5-11,0 12,0-11,5 12,5-12,0 13,0-12,5

Code

Cap.

WER25D12,5 WER25D13,0 WER25D13,5 WER25D14,0 WER25D14,5 WER25D15,0 WER25D15,5 WER25D16,0 WER32D16,5 WER32D17,0 WER32D17,5 WER32D18,0 WER32D18,5 WER32D19,0 WER32D19,5 WER32D20,0 WER40D20,5 WER40D21,0 WER40D21,5 WER40D22,0 WER40D22,5 WER40D23,0 WER40D23,5 WER40D24,0 WER40D24,5 WER40D25,0

12,0-11,5 12,5-12,0 13,0-12,5 13,5-13,0 14,0 13,5 14,5-14,0 15,0-14,5 15,5-15,0 16,0-15,5 16,5-16,0 17,0-16,5 17,5-17,0 18,0-17,5 18,5-18,0 19,0-18,5 19,5-19,0 20,0-19,5 20,5-20,0 21,0-20,5 21,5-21,0 22,0-21,5 22,5-22,0 23,0-22,5 23,5-23,0 24,0-23,5 24,5-24,0 25,0-24,5

ER16 - ER20 - ER25 - ER32 - ER40 Special tool holders are made on request

Pull studs PULL STUD ISO 30 Electrospindle Type “HSD” - biesse

PULL STUD ISO 30 Electrospindle Type “COLOMBO GIORDANO”

RAY

Code: W972

Code: W972D

PULL STUD ISO 30 DIN 69872

PULL STUD ISO 30

Electrospindle Type “ELTE” “OMLAT” “IBAG” “COLOMBO GIORDANO“ “S ACCORDO”

For CNC routers “CMS”

RAY

Code: W972B

UNCERTIFIED PULL STUD Code W972 W972B W972D W976

Code: W976

CERTIFIED PULL STUD Code W972C W972BC W972DC W976C

Special tool holders are made on request

Pull studs PULL STUD ISO 30 7388/2A

PULL STUD ISO 30 For CNC router Type “MORBIDELLI”

RAY

Code: W972A

Code: W980

PULL STUD MAS-BT 30

Code: W976BT30

UNCERTIFIED PULL STUD Code W972A W980 W976BT30 W977BT30

PULL STUD MAS-BT 30

Code: W977BT30

CERTIFIED PULL STUD Code W972AC W980C W976BT30C W977BT30C

Special tool holders are made on request

Pull studs PULL STUD MAS-BT 35 PULL STUD MAS-BT 35

Code: W978BT35 PULL STUD ISO 40 DIN 69872

Code: W979BT35 PULL STUD ISO 40 7388/2A

PULL STUD ISO 25

Code: W988

Code: W971

Code: W986

UNCERTIFIED PULL STUD Code W971 W986 W988 W978BT35 W979BT35

CERTIFIED PULL STUD Code W971C W986C W988C W978BT35C W979BT35C

Special tool holders are made on request

Reduced flanged cap

Code WW099 WW100 WW101 WW102 WW103 WW104 WW105 WW106 WW107 WW108

A 10 10 13 15 15 15 15 5 15 40

C 4 4 5 5 5 5 5 5 5 10

D 20 25 30 35 40 50 1” 1/4 2” 1” 50

D1 30 35 40 45 50 60 45 55 35 50

E 8 9 10 12,5 12,5 12,5 12,5 12,5 8 -

Expanded flanged cap Code WW111 WW112 WW113 WW114 WW115 WW116

A 10 10 10 10 10 10

C 3 3 3 3 3 3

Special tool holders are made on request

D 30 35 40 50 1” 1/4 2”

D1 40 45 50 60 45 55

E 10 12,5 12,5 12,5 12,5 12,5

Locking wrenches for nuts

Code W997Z W998T W999P W999S

Wrench ER25 ER32 ER40 ORT25

Code W991C-M W992C-M W993C-M W994C-M

Wrench ER11 MINI ER16 MINI ER20 MINI ER25 MINI

Nut W987 W990 W993 W995

Nut W9514 W9534 W9554 W9574

Code W981C W984C W987C W990C W993C

Wrench Nut I-TS 16 – ER 16 G 16 I-TS – W9534 I-TS 20 – ER 20 G 20 I-TS – W9554 I-TS 25 – ER 25 G 25 I-TS – W987 I-TS 32 – ER 32 G 32 I-TS – W990 I-TS 40 – ER 40 G 40 I-TS – W993

Nut W9514B W9534B W9554B W9574B

Code W9991C W9992C W9993C

Special tool holders are made on request

Wrench ER25 ER32 ER40

Nut W9991 W9992 W9993

Dynamometrical wrench for erc nuts Dynamometrical wrench Cod. W99960C W99961C W99962C W99963C W99964C

Ghiera D H 12 117 16 120 22 175 28 180 35 185

Nm 8 18 28 35 40

Wrench for ER nuts Cod. W99970C W99971C W99972C W99973C W99974C

Tipo ER 16 ER 20 ER 25 ER 32 ER 40

Ghiera D 32 35 42 50 63

H 300 300 470 470 470

Nm 25-35 30-40 45-55 65-75 110-120

Nm 45-55 60-70 80-90 120-130 190-200

Wrench for hexagonal nuts

Cod. W99980C W99981C W99982C W99983C W99984C

Ghiera D 14 17 22 25 30

H 161 168 194 324 330

Nm 18 20 28 30-40 40-45

Special tool holders are made on request

Dynamometrical wrench for erc nuts Dynamometrical wrench Cod. W99930C W99931C W99932C W99933C W99934C

Type Ghiera D ER 16 32 ER 20 35 ER 25 42 ER 32 50 ER 40 63

H Nm Nm 300 25-35 45-55 300 30-40 60-70 470 45-55 80-90 470 65-75 120-130 470 110-120 190-200

Roll wrench Cod. W99940C W99941C W99942C W99943C W99944C W99945C

Ghiera D 10 12 16 22 28 35

H 117 117 160 183 183 193

Nm 6 8 18 28 35 40

ERC nuts locking collet, nuts for high speed Cod. W99950C W99951C W99952C W99953C W99954C W99955C

Type ERX16 ERX20 ERX25 ERX32 ERX40 ERX50

F M22x1,5 M25x1,5 M32x1,5 M40x1,5 M50x1,5 M64x2

Ă&#x2DC;D 32 35 42 50 63 78

Warning: to avoid any strain of the chuck, you must not assemble any tools with length of shank longer then its own diameter. The tool must be locked for the full internal length of the chuck

Special tool holders are made on request

Dynamometrical wrench with double handgrip and release

Dynamometrical wrench d8 32 35 42 50 63

d9 M22 x 1,5 M25 x 1,5 M32 x 1,5 M40 x 1,5 M50 x1,5

H 350 350 500 500 500

Nm 25-35 30-40 45-55 65-75 110-120

Nm 45-55 60-70 60-90 120-130 190-200

Special tool holders are made on request

Dynamometrical wrench

Vite W99910C W99911C W99912C W99913C W99914C W99915C W99916C W99917C W99918C

SW 3 mm 4 mm 5 mm 6 mm 6 mm 8 mm 10 mm 10 mm 13 mm

Power 5 Nm 10 Nm l6 Nm 28 Nm 48 Nm 58 Nm 60 Nm 72 Nm 90 Nm

3-4-5-6

6 - 8 - 10

10 - 13

Special tool holders are made on request

Tooling clamper Rotary tooling clamper IMS code VE130 VE140 VE150 VE160

Type Flange D=50 Flange D=63 Flange D=97.5 Flange D=100

Tooling clamper 30째 IMS code VE230 VE240 VE250 VE260

Type Flange D=50 Flange D=63 Flange D=97.5 Flange D=100

Tooling clamper 90째 IMS code VE330 VE340 VE350 VE360 VE355

Type Flange D=50 Flange D=63 Flange D=97.5 Flange D=100 Flange D=80

Special tool holders are made on request

Security locking system

Special tool holders are made on request

IMS - Shrink machines

Code W1747 HSK 25-32-40 50-63-80-100 125 ISO 25-30-35-40 50

Code W1749 HSK 25-32-40 50-63-80-100 ISO 25-30-35-40 50

Special tool holders are made on request

Release kit

Special tool holders are made on request

IMS - Clamping chucks HSK New

Code W9001 W9002 W9003 W9004

Type HSK32ACE - 40BDF HSK40ACE - 50BDF HSK50ACE - 63BDF HSK63ACE - 80BDF

Other size avaible on demand

Special tool holders are made on request

Petal collets Petal collets for clamping tool holders with niploy treatment for electrospindle SSK – JBS 1 ISO 10 – F.M. α=15° SSK – JBS 2 ISO 10 – F.M. α=90° SSK – JBS 1 ISO 15 - F.M. α=15° SSK – JBS 2 ISO 15 - F.M. α=90° SSK – JBS 1 ISO 20 - F.M. α=15° SSK – JBS 2 ISO 20 - F.M. α=90° SSK – JBS 1 ISO 25 - F.M. α=15° SSK – JBS 2 ISO 25 - F.M. α=90° SSK – 30 DIN – F.M. α=15° CORSA 2 MM SSK – 30 ANSI – F.M. α=45° CORSA 2 MM SSK – 40 DIN – F.M. α=15° CORSA 2 MM SSK – 40 ANSI – F.M. α=45° CORSA 2 MM SSK – 45 DIN – F.M. α=15° CORSA 2 MM SSK – 45 ANSI – F.M. α=45° CORSA 2 MM SSK – 50 DIN – F.M. α=15° CORSA 2 MM SSK – 50 ANSI – F.M. α=45° CORSA 2 MM SSK – 60 DIN – F.M. α=15° CORSA 2 MM SSK – 60 ANSI – F.M. α=45° CORSA 2 MM SSKK – 30 DIN – F.M. α=15° CORSA 0.5 MM SSKK – 30 ANSI – F.M. α=45° CORSA 0.5 MM SSKK – 40 DIN – F.M. α=15° CORSA 0.5 MM SSKK – 40 ANSI – F.M. α=45° CORSA 0.5 MM SSKK – 45 DIN – F.M. α=15° CORSA 0.5 MM SSKK – 45 ANSI – F.M. α=45° CORSA 0.5 MM SSKK – 50 DIN – F.M. α=15° CORSA 0.5 MM SSKK – 50 ANSI – F.M. α=45° CORSA 0.5 MM SSKK – 60 DIN – F.M. α=15° CORSA 0.5 MM SSKK – 60 ANSI – F.M. α=45° CORSA 0.5 MM

SSKKA 30 DIN F.M. α=15° CORSA 0.5 MM BILANCIATA SSKKA 30 ANSI F.M. α=45° CORSA 0.5 MM BILANCIATA SSKKA 40 DIN F.M. α=15° CORSA 0.5 MM BILANCIATA SSKKA 40 ANSI F.M. α=45° CORSA 0.5 MM BILANCIATA SSKKA 45 DIN F.M. α=15° CORSA 0.5 MM BILANCIATA SSKKA 45 ANSI F.M. α=45° CORSA 0.5 MM BILANCIATA SSKKA 50 DIN F.M. α=15° CORSA 0.5 MM BILANCIATA SSKKA 50 ANSI F.M. α=45° CORSA 0.5 MM BILANCIATA SSKKA 60 DIN F.M. α=15° CORSA 0.5 MM BILANCIATA SSKKA 60 ANSI F.M. α=45° CORSA 0.5 MM BILANCIATA SSKIGA 40 DIN F.F. α=15° CORSA 2 MM BILANCIATA SSKIGA 40 ANSI F.F. α=45° CORSA 2 MM BILANCIATA SSKIGA 45 DIN F.F. α=15° CORSA 2 MM BILANCIATA SSKIGA 45 ANSI F.F. α=45° CORSA 2 MM BILANCIATA SSKIGA 50 DIN F.F. α=15° CORSA 2 MM BILANCIATA SSKIGA 50 ANSI F.F. α=45° CORSA 2 MM BILANCIATA SSKIGA 60 DIN F.F. α=15° CORSA 2 MM BILANCIATA SSKIGA 60 ANSI F.F. α=45° CORSA 2 MM BILANCIATA SSKIGKA 40 DIN F.F. α=15° CORSA 0.5 MM BILANCIATA SSKIGKA 40 ANSI F.F. α=45° CORSA 0.5 MM BILANCIATA SSKIGKA 45 DIN F.F. α=15° CORSA 0.5 MM BILANCIATA SSKIGKA 45 ANSI F.F. α=45° CORSA 0.5 MM BILANCIATA SSKIGKA 50 DIN F.F. α=15° CORSA 0.5 MM BILANCIATA SSKIGKA 50 ANSI F.F. α=45° CORSA 0.5 MM BILANCIATA SSKIGKA 60 DIN F.F. α=15° CORSA 0.5 MM BILANCIATA SSKIGKA 60 ANSI F.F. α=45° CORSA 0.5 MM BILANCIATA

SSKIG 40 DIN F.F. α=15° CORSA 2 MM SSKIG 40 ANSI F.F. α=45° CORSA 2 MM SSKIG 45 DIN F.F. α=15° CORSA 2 MM SSKIG 45 ANSI F.F. α=45° CORSA 2 MM SSKIG 50 DIN F.F. α=15° CORSA 2 MM SSKIG 50 ANSI F.F. α=45° CORSA 2 MM SSKIG 60 DIN F.F. α=15° CORSA 2 MM SSKIG 60 ANSI F.F. α=45° CORSA 2 MM SSKIGK 40 DIN F.F. α=15° CORSA 0.5 MM SSKIGK 40 ANSI F.F. α=45° CORSA 0.5 MM SSKIGK 45 DIN F.F. α=15° CORSA 0.5 MM SSKIGK 45 ANSI F.F. α=45° CORSA 0.5 MM SSKIGK 50 DIN F.F. α=15° CORSA 0.5 MM SSKIGK 50 ANSI F.F. α=45° CORSA 0.5 MM SSKIGK 60 DIN F.F. α=15° CORSA 0.5 MM SSKIGK 60 ANSI F.F. α=45° CORSA 0.5 MM SSKA 30 DIN F.M. α=15° CORSA 2 MM BILANCIATA SSKA 30 ANSI F.M. α=45° CORSA 2 MM BILANCIATA SSKA 40 DIN F.M. α=15° CORSA 2 MM BILANCIATA SSKA 40 ANSI F.M. α=45° CORSA 2 MM BILANCIATA SSKA 45 DIN F.M. α=15° CORSA 2 MM BILANCIATA SSKA 45 ANSI F.M. α=45° CORSA 2 MM BILANCIATA SSKA 50 DIN F.M. α=15° CORSA 2 MM BILANCIATA SSKA 50 ANSI F.M. α=45° CORSA 2 MM BILANCIATA SSKA 60 DIN F.M. α=15° CORSA 2 MM BILANCIATA SSKA 60 ANSI F.M. α=45° CORSA 2 MM BILANCIATA

Special tool holders are made on request

100

Petal collets Petal collets for clamping tool holders with niploy treatment for electrospindle SSKIGKB 40 PT1 – F.F. α=45° CORSA 0.5 MM SSKIGKB 40 PT2 – F.F. α=30° CORSA 0.5 MM SSKIGKB 45 PT1 – F.F. α=45° CORSA 0.5 MM SSKIGKB 45 PT2 – F.F. α=30° CORSA 0.5 MM SSKIGKB 50 PT1 – F.F. α=45° CORSA 0.5 MM SSKIGKB 50 PT2 – F.F. α=30° CORSA 0.5 MM SSKIGKB 60 PT1 – F.F. α=45° CORSA 0.5 MM SSKIGKB 60 PT2 – F.F. α=30° CORSA 0.5 MM

SSKAB 40 PT1 – F.M. α=45° CORSA 2 MM BILANCIATA SSKAB 40 PT2 – F.M. α=30° CORSA 2 MM BILANCIATA SSKAB 45 PT1 – F.M. α=45° CORSA 2 MM BILANCIATA SSKAB 45 PT2 – F.M. α=30° CORSA 2 MM BILANCIATA SSKAB 50 PT1 – F.M. α=45° CORSA 2 MM BILANCIATA SSKAB 50 PT2 – F.M. α=30° CORSA 2 MM BILANCIATA SSKAB 60 PT1 – F.M. α=45° CORSA 2 MM BILANCIATA SSKAB 60 PT2 – F.M. α=30° CORSA 2 MM BILANCIATA

SSKIGKAB 40 PT1 – F.F. α=45° CORSA 0.5 MM BILANCIATA SSKIGKAB 40 PT2 – F.F. α=30° CORSA 0.5 MM BILANCIATA SSKIGKAB 45 PT1 – F.F. α=45° CORSA 0.5 MM BILANCIATA SSKIGKAB 45 PT2 – F.F. α=30° CORSA 0.5 MM BILANCIATA SSKIGKAB 50 PT1 – F.F. α=45° CORSA 0.5 MM BILANCIATA SSKIGKAB 50 PT2 – F.F. α=30° CORSA 0.5 MM BILANCIATA SSKIGKAB 60 PT1 – F.F. α=45° CORSA 0.5 MM BILANCIATA SSKIGKAB 60 PT2 – F.F. α=30° CORSA 0.5 MM BILANCIATA

PINZE A TENUTA STAGNA DIN30 F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA ANSI30 F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA DIN40 F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA ANSI40 F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA DIN45 F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA ANSI45 F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA DIN50 F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA ANSI50 F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA DIN60 F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA ANSI60 F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA PT1 F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA PT2 F.M./F.F. EQUILIBRATA

SSKIGB 40 PT1– F.F. α=45° CORSA 2 SSKIGB 40 PT2– F.F. α=30° CORSA 2 SSKIGB 45 PT1– F.F. α=45° CORSA 2 SSKIGB 45 PT2– F.F. α=30° CORSA 2 SSKIGB 50 PT1– F.F. α=45° CORSA 2 SSKIGB 50 PT2– F.F. α=30° CORSA 2 SSKIGB 60 PT1– F.F. α=45° CORSA 2 SSKIGB 60 PT2– F.F. α=30° CORSA 2

MM MM MM MM MM MM MM MM

SSKIGAB 40 PT1– F.F. α=45° CORSA 2 SSKIGAB 40 PT2– F.F. α=30° CORSA 2 SSKIGAB 45 PT1– F.F. α=45° CORSA 2 SSKIGAB 45 PT2– F.F. α=30° CORSA 2 SSKIGAB 50 PT1– F.F. α=45° CORSA 2 SSKIGAB 50 PT2– F.F. α=30° CORSA 2 SSKIGAB 60 PT1– F.F. α=45° CORSA 2 SSKIGAB 60 PT2– F.F. α=30° CORSA 2

MM BILANCIATA MM BILANCIATA MM BILANCIATA MM BILANCIATA MM BILANCIATA MM BILANCIATA MM BILANCIATA MM BILANCIATA

PINZE A TENUTA STAGNA SSKIK DIN F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA SSKIK ANSI F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA SSKIGIK DIN F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA SSKIGIK ANSI F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA SSKIKA DIN F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA SSKIKA ANSI F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA SSKIGIKA DIN F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA SSKIGIKA ANSI F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA SSKIGAK DIN F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA SSKIGAK ANSI F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA SSKIGAKA DIN F.M./F.F. EQUILIBRATA PINZE A TENUTA STAGNA SSKIGAKA ANSI F.M./F.F. EQUILIBRATA

SSKKB 40 PT1 – F.M. α=45° CORSA 0.5 MM SSKKB 40 PT2 – F.M. α=30° CORSA 0.5 MM SSKKB 45 PT1 – F.M. α=45° CORSA 0.5 MM SSKKB 45 PT2 – F.M. α=30° CORSA 0.5 MM SSKKB 50 PT1 – F.M. α=45° CORSA 0.5 MM SSKKB 50 PT2 – F.M. α=30° CORSA 0.5 MM SSKKB 60 PT1 – F.M. α=45° CORSA 0.5 MM SSKKB 60 PT2 – F.M. α=30° CORSA 0.5 MM SSKKAB 40 PT1 – F.M. α=45° CORSA 0.5 MM BILANCIATA SSKKAB 40 PT2 – F.M. α=30° CORSA 0.5 MM BILANCIATA SSKKAB 45 PT1 – F.M. α=45° CORSA 0.5 MM BILANCIATA SSKKAB 45 PT2 – F.M. α=30° CORSA 0.5 MM BILANCIATA SSKKAB 50 PT1 – F.M. α=45° CORSA 0.5 MM BILANCIATA SSKKAB 50 PT2 – F.M. α=30° CORSA 0.5 MM BILANCIATA SSKKAB 60 PT1 – F.M. α=45° CORSA 0.5 MM BILANCIATA SSKKAB 60 PT2 – F.M. α=30° CORSA 0.5 MM BILANCIATA SSKB 40 PT1 – F.M. α=45° CORSA 2 MM SSKB 40 PT2 – F.M. α=30° CORSA 2 MM SSKB 45 PT1 – F.M. α=45° CORSA 2 MM SSKB 45 PT2 – F.M. α=30° CORSA 2 MM SSKB 50 PT1 – F.M. α=45° CORSA 2 MM SSKB 50 PT2 – F.M. α=30° CORSA 2 MM SSKB 60 PT1 – F.M. α=45° CORSA 2 MM SSKB 60 PT2 – F.M. α=30° CORSA 2 MM

Special tool holders are made on request

101

Locking-unlocking system for plastic fork holder Code W1720-M W1721-M W1722-M W1723-M

Type ISO30 - BIESSE ISO30 - DIN ISO40 - DIN HSK-63F W1720-M

W1721-M

W1722-M W1723-M

Special tool holders are made on request

102

Collets for clamping tool holders with niploy treatment for electrospindle Balancing diagram

For collet/clamping

Special tool holders are made on request

103

Cone cleaner It easly and rapidly cleans the machine cone. Special cotton strips for avoiding damages to the machine cone.

Code VEVTW30 VEVTW40 VEVTW50 VEVTK25 VEVTK32 VEVTK40 VEVTK50 VEVTK63 VEVTK80

Description ISO 30 ISO 40 ISO 50 HSK25 HSK32 HSK40 HSK 50 HSK 63 HSK 80

Trolley Tool holders BACK ANGLE PLATE

It is made up of fire painted sheet and (during the assembly phase) it is possible to set one or more levels. On one of the two sides there is an angle plate for holding wrenches and other tools. It is available in the following versions: VEVTT-2 ISO 30 • VEVTT-2 ISO 40 • VEVTT-2 ISO 50 • VEVTT-2 HSK 63A • VEVTT-2 HSK 80B.

Special tool holders are made on request

104

Accuracy runout

10/1,5 1,6/2,9 3,0/5,9 6,0/9,9 10,0/17,9 18,0/26

6 10 16 25 40 50

ER Standard Precision

HP High Precision

UP Ultra Precision

0,015

0,008

0,005

0,020

0,008

0,005

Special tool holders are made on request

105

Balancing Diagrams

Special tool holders are made on request

106

Pull stud angle 45째 DIN 7388/2-B and Pull stud angle 15째 DIN 69872

Code

ISO

13,35

9,3

M 12

---

11,8

8,15

17,2

2,75

14006V

18,95

12,95

22,5

M 16

7,35

44,5

16,4

11,15

21,1

3,25

140108F

24,5

16,3

M 20

9,25

20,95

14,85

27,05

4,25

140110V

29,1

19,6

M 24

11,55

65,5

25,55

17,95

29,95

5,25

37,25

24,95

M30

38,15

27,65

7,75

Code

ISO

140002Y

M 12

---

140006U

M 16

1400008E

M 20

8,5

1400010T

M 24

11,5

1400014K

M 30

Special tool holders are made on request

107

Protective treatments Working wood, it happens that the tool holders become rusted because of some shaving with corrosive and oxidant properties. To avoid these kind of problems, that damage and wear away the tool holders, there are two treatments:

“IMPREGLON” Superficial treatment that blackes the external cone surface and confer a good fluency in order to permit to the cleaner device to blow shavings away.

“NIPLOY” The treatment consist of a chemical deposition of nikel along the cone surface to avoid corrosion and oxidation problems. The cone appears yellow.

Special tool holders are made on request

108

Difference between certified and uncertified pull stud The pull stud is the strategic connection between machine and tool-holder. In case of breakage, it could cause serious damages to the machine and above all wounds the worker. In the ECC norms of the machinery makers, the pull stud is considerated as extremely dangerous and therefore carefully tested.

“Uncertified pull studs” The pull stud is made in steel according to the required tolerances and can be produced for anyone. Should it break during the process, the criminal and thirdy-party liability for the possible damages rests entirely on the user and to determinate the origin of the pull stud is legally impossible.

“Certified pull studs” A workpiece made in steel similar to the uncertified pull stud, but marked with the manufacturer name and production’s lot number. The maker has to keep by his own premises the documentation of the used material, the certificate of the heat treatment and a sample of every lot. If the pull stud is unlike the requested specification, the criminal and third-party liability rests entirely with the manufacturer. Otherwise, the responsibility falls, since everything has been done to avoid the failure.

Special tool holders are made on request

109

Special features of titan tool holders TITAN comes from a research carried out by IMS to increase tool holders’ quality for wood and marble manufacture. TITAN is a superficial residue of NiCr at high protection against corrosion, with medium 30 micron thickness. The innovation consists in a new technique with the application of a chemical coverage that gives to the surface a very little wrinkledness, helping the sliding of any possible impurities and reducing the friction on the cone itself. The treatment consists to reach a superficial hardness of 830 Hv, higher than the standards used till now. Hardness is only on the surface, so tool holder’s life can be extended of the 60%, avoiding problem of structuraifracture, as the internal features don’t change. Moreover this treatment is one of the best protection so it can be applied also to marble, stone and glass process where tool holders are exposed to the effects of strong oxidants. Naturally this product needs to be preserved carefully, it’s important to avoid crashes that can scratch and chipped the holder, especially on the corners, where it results more fragile.

Special tool holders are made on request

110

Make and model of HSK spindle CNC router

Tool holder dimensions D= d= H= F= SW =

Special tool holders are made on request

111

Make and model of CNC router

Pull stud dimensions A= B= C= P=

Tool holder dimensions D= E= F= H= SW =

Special tool holders are made on request

112

Collet dimensions Tool holder dimensions D= d= L=

Pull stud dimensions D= d= L= B=

Tool holder dimensions D= d= L=

Special tool holders are made on request

Graphic Design: www.rossanoadv.com

via Vittorio Emanuele, 103 12048 Sommariva Bosco (CN) Italy Tel. +39 0172 54015 Fax +39 0172 54014 www.ims.eu | ims@ims.eu