CopertinaMarmoINGLESE2008.qxd:Layout 1
19-04-2008
19:54
Pagina 1
MARMO / MARBLE
Tool holders catalogue Parts of your business
CopertinaMarmoINGLESE2008.qxd:Layout 1
19-04-2008
19:54
Pagina 2
Tool holders catalogue Parts of your business May 2008 4th edition
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:15
Pagina 1
Index
2-3
Tool holders ISO30 new type
4-5
Tool holders ISO30 type DIN 69871/A
6
Tool holders ISO 40 type “Agut” and “Prussiani”
7
Tool holders ISO 40 type “Brembana” old type
8-9
Tool holders ISO 40 type “Bavelloni”, “Pedrini” and “Cobalm”
10
Tool holders ISO 40 type “Breton”
11
Tool holders ISO 40 type “Ravelli”
12-13
Tool holders ISO 40 type “Intermac”, “Bimatech”,“Northwood” - HSD
14-15
Tool holders ISO 40 type “Brembana” new type
16-17
Tool holders ISO 50 type DIN 69871/A, “Omag and “2T”
18-19
Tool holders HSK80B type “Breton”
20
Tool holders HSK 63A type “IMT”
21
Tool holders ISO 40 type DIN 69871/A
22-23
Tool holders ISO 40 BT type “VEM”, “Thibaut”, “Helios”, “Park Industries”
24
Tool holders with coupling 1/2 Gas
25
Test bar and Tool holders for diamond powders
26
Pull stud angle 15° DIN 69872, realease kit and fingers
27
Petal collets type SSKK-DIN, SSKK-ANSI
28
Petal collets type SSK-DIN, SSK-ANSI
29
Digital height measuring device, cone cleaner and trolley
30
Ring nut for collet chuck holder, tooling clamper
31
Collet chuck 2/10-3/16-3/20-3/26 ER type 16-25-32-40 DIN 6499B
32
Protective treatments
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:15
Pagina 2
2
Tool holders ISO 30 New type Grinding wheel holder Code MVDIN311NT MVDIN322NT MVDIN312NT MVDIN323NT MVDIN313NT MVDIN314NT MVDIN324NT MVDIN315NT MVDIN325NT MVDIN316NT
A 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1
D 22 22 22 22 22 35 35 35 35 35
L 20 34 39 47 80 20 34 39 47 80
L1 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E M S 45 10 3 45 10 5 45 12 3 78 M16 3 60 1/2" 3
Pull stud Code MVDIN300
Type M12 angle 15°
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:15
Pagina 3
3
Tool holders ISO 30 New type
Drill point holder Code MVDIN301NT MVDIN306NT
A 19,1 19,1
Size 1/2" M30
D 40 40
L1 40 40
ER collet chuck holder Code MVDIN330NT MVDIN331NT
A 19,1 19,1
Collet type D ER25 42 ER32 50
L 53,40 53,40
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:15
Pagina 4
4
Tool holders ISO 30 Type DIN 69871/A Grinding wheel holder Code MVDIN311 MVDIN322 MVDIN312 MVDIN323 MVDIN313 MVDIN314 MVDIN324 MDVIN315 MDVIN325 MDVIN316 MDVIN317 MVDIN321 C MVDIN326 L
A 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 34 39 47 80 45 5 5
L1 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 30,9 6 holes 75 6 holes
Locking kit Kit made up of 2 spacer rings, 1 locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Pull stud Code MVDIN300
Type M12 angle 15°
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 5
5
Tool holders ISO 30 Type DIN 69871/A
Drill point holder Code MVDIN301 MVDIN306
A 19,1 19,1
Size 1/2" M30
D 40 40
L1 40 40
D 42 50
L 53,4 53,4
ER collet chuck holder Code MVDIN330 MVDIN331
A 19,1 19,1
Collet type ER25 ER32
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 6
6
Tool holders ISO 40 Type “Agut” and “Prussiani”
Grinding wheel holder Code MVAG118
D 35
L 124
Grinding wheel holder Code MVAG1127
D 79
L 30
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel locking screw. Code M210
d 35
D 65
E 45
M 12
S 3
Pull stud Code MVBA900
Type M16 angle 15°
Drill point holder Code MVAG101 MVAG106
Size 1/2" M30
D 49 49
L 18 18
ER collet chuck holder Code MVAG131 MVAG132
Collet type ER32 ER40
D 50 63
L 53,4 57,4
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 7
7
Tool holders ISO 40 Type “Brembana” old type Grinding wheel holder Code A MVBR111OT 36,6 MVBR122OT 36,6 MVBR112OT 36,6 MVBR123OT 36,6 MVBR113OT 36,6 MVBR114OT 36,6 MVBR124OT 36,6 MVBR115OT 36,6 MVBR125OT 36,6 MVBR116OT 36,6 MVBR117OT 36,6 MVBR121OT C 36,6 MVBR126OT L 36,6
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 34 39 47 80 45 5 5
L1 50 50 50 50 50 50 50 50 50 50 50 30,9 6 holes 75 6 holes
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Pull stud Code MVBR900
Type M16 angle 15°
Drill point holder Code MVBR101OT MVBR106OT
A 36,6 36,6
Size 1/2" M30
D 45 45
L1 45 45
ER collet chuck holder Code MVBR131OT MVBR132OT
A Collet type 36,6 ER32 36,6 ER40
D 50 63
L 42,5 46,5
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 8
8
Tool holders ISO 40 Type “Bavelloni”, “Pedrini” and “Cobalm” Grinding wheel holder Code MVBA111 MVBA122 MVBA112 MVBA123 MVBA113 MVBA114 MVBA124 MVBA115 MVBA125 MVBA116 MVBA117 MVBA121 C MVBA126 L
A 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 34 39 47 80 45 5 5
L1 10 10 10 10 10 10 10 10 10 10 15,9 30,9 6 holes 75 6 holes
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Pull stud Code MVBA900 MVIN900 MVVE900
Type M16 angle 15° Pedrini Cobalm
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 9
9
Tool holders ISO 40 Type “Bavelloni”, “Pedrini” and “Cobalm”
Drill point holder Code MVBA101 MVBA106
A 19,1 19,1
M 1/2" M30
D 50 50
L1 50 50
D 50 63
L 72,5 72,5
ER collet chuck holder Code MVBA131 MVBA132
A Collet type 19,1 ER32 19,1 ER40
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 10
10
Tool holders ISO 40 Type “Breton” Grinding wheel holder Code MVBT111 MVBT122 MVBT112 MVBT123 MVBT113 MVBT114 MVBT124 MVBT115 MVBT125 MVBT116 MVBT117 MVBT121 C MVBT126 L
A 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 34 39 47 80 45 5 5
L1 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 30,9 6 holes 75,0 6 holes
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Pull stud Code MVBT900
Type M16 rayed
Drill point holder Code MVBT101 MVBT106
A 19,1 19,1
Size 1/2" M30
D 50 50
L1 50 50
ER collet chuck holder Code MVBT131 MVBT132
A 19,1 19,1
Collet type D ER32 50 ER40 63
L1 53,4 57,4
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 11
11
Tool holders ISO 40 Type “Ravelli” Grinding wheel holder Code MVRA141 MVRA146
A 33 33
D 30 45
L 148 148
L1 30,6 30,6
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Pull stud Code MVRA900
Type M16 angle 15°
Drill point holder Code MVRA101 MVRA106
A 33 33
Size 1/2" M30
D 54 54
L1 51,6 51,6
ER collet chuck holder Code MVRA131 MVRA132
A 33 33
Collet ER32 ER40
D 50 63
L 60 70
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 12
12
Tool holders ISO 40 Type “Intermac”, “Bimatech” and “Northwood” - HSD Grinding wheel holder Code MVIN109 MVIN110 MVIN111 MVIN122 MVIN112 MVIN123 MVIN113 MVIN113/B MVIN114 MVIN124 MVIN115 MVIN125 MVIN116 MVIN117 MVIN121 C MVIN126 L MVIN118
A 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
D 12 12 22 22 22 22 22 22 35 35 35 35 35 45 50 50 43
L 23 14 20 34 39 47 80 90 20 34 39 47 80 45 5 6 holes 5 6 holes 170
Locking kit Kit made up of 2 spacer rings, 1 locking washer, 1 stainless steel locking screw. Code M200 M202 M210 M211* M212** M220 M230 M232
d 22 22 35 35 35 45 50 43
D 60 60 60 60 60 65 98 -
E 45 45 45 45 45 78 60 -
S 5 5 3 3 3 3 9 -
D M 10 10 12 10 10 16 1/2 16
D
*
**
Pull stud Code MVIN900* MVBM900** MVTN900 **
*
Type INTERMAC BIMATECH NORTHWOOD
L 54 54 44,5
D 19 19 22,5 **
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
*
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 13
13
Tool holders ISO 40 Type “Intermac”, “Bimatech” and “Northwood” - HSD
Drill point holder Code MVIN101 MVIN106
A 25 25
Size 1/2" M30
ER collet chuck holder Code MVIN131 MVIN132
A 25 25
Collet type D ER32 50 ER40 63
L 52,5 56,5
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 14
14
Tool holders ISO 40 Type “Brembana” new type Grinding wheel holder Code MVBR111NT MVBR122NT MVBR112NT MVBR123NT MVBR113NT MVBR114NT MVBR124NT MVBR115NT MVBR125NT MVBR116NT MVBR117NT MVBR121NT C MVBR126NT L
A 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 34 39 47 80 45 5 5
L1 50 50 50 50 50 50 50 50 50 50 50 30,9 6 holes 75 6 holes
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E M S 45 10 3 45 10 5 45 12 3 78 M16 3 60 1/2" 3
Pull stud Code MVBR900
Type M16 angle 15°
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 15
15
Tool holders ISO 40 Type “Brembana” new type
Drill point holder Code MVBR101NT MVBR106NT
A 19,1 19,1
Size 1/2" M30
D 50 50
L1 50 50
ER collet chuck holder Code MVBR131NT MVBR132NT
A 19,1 19,1
Collet type D ER32 50 ER40 63
L 53,40 57,15
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 16
16
Tool holders ISO 50 Type DIN 69871/A, “Omag” and “2T” Grinding wheel holder Code MVDIN511 MVDIN522 MVDIN512 MVDIN523 MVDIN513 MVDIN514 MVDIN524 MVDIN515 MVDIN525 MVDIN516 MVDIN517 MVDIN521 C MVDIN526 L
A 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 32 39 47 80 45 5 5
L1 70 70 70 70 70 70 70 70 70 70 70 50 6 holes 150 6 holes
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Pull stud Code MVDIN500
Type M24 angle 15°
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 17
17
Tool holders ISO 50 Type DIN 69871/A, “Omag” and “2T”
Drill point holder Code MVDIN501 MVDIN502 MVDIN503 MVDIN504 MVDIN505 MVDIN506
A 19,1 19,1 19,1 19,1 19,1 19,1
Size 1/2" 1/2" 1/2" 1/2" 1/2" M30
D 40 40 40 40 40 40
L 50 80 120 200 250 80
ER collet chuck holder Code MVDIN531 MVDIN532
A Collet type D 19,1 ER32 50 19,1 ER40 63
L 72,5 76,25
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:16
Pagina 18
18
Tool holders HSK 80B Type “Breton” Grinding wheel holder Code MVBE111 MVBE112 MVBE122 MVBE113 MVBE114 MVBE115 MVBE125 MVBE116 MVBE117 MVBE118 MVBE124
A 26 26 26 26 26 26 26 26 26 26 26
D 22 22 22 22 35 35 35 35 45 50 35
L 20 34 47 90 20 32 47 90 44 5 39
L1 44 44 44 44 44 44 44 44 44 44 44
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Coolant group Code MVBE900 MVBE901
Type Group: pivot, screw, or Wrench
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 19
19
Tool holders HSK 80B Type “Breton”
Drill point holder Code MVBE101 MVBE106
A 26 26
Size 1/2" M30
D 67 67
L1 44 44
Collet type D ER32 50 ER40 63
L 94 94
ER collet chuck holder Code MVBE131 MVBE132
A 26 26
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 20
20
Tool holders HSK 63A Type IMT Grinding wheel holder Code MVIM111 MVIM122 MVIM112 MVIM123 MVIM113 MVIM114 MVIM124 MVIM115 MVIM125 MVIM116 MVIM117 MVIM121 C MVIM126 L
A 26 26 26 26 26 26 26 26 26 26 26 26 26
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 34 39 47 80 45 5 5
L1 24 24 24 24 24 24 24 24 24 24 24 30,9 6 holes 75 6 holes
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Coolant group Code MVIM900 MVIM901
Type Group: pivot, screw, or Wrench
Head holder Code MVIM128
A 26
L1 10
Drill point holder Code MVIM101 MVIM106
A 26 26
Size 1/2" M30
D 50 50
L1 50 50
ER collet chuck holder Code MVIM131 MVIM132
A 26 26
Collet ER32 ER40
D 50 63
L 50 55
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 21
21
Tool holders ISO 40 Type DIN 69871/A Grinding wheel holder Code MVDIN411 MVDIN422 MVDIN412 MVDIN423 MVDIN413 MVDIN414 MVDIN424 MDVIN415 MDVIN425 MDVIN416 MDVIN417 MVDIN421 C MVDIN426 L
A 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 34 39 47 80 45 5 5
L1 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 30,9 6 holes 75 6 holes
Locking kit Kit made up of 2 spacer rings, 1 locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Pull stud Code MVDIN900
Type M16 angle 15°
Drill point holder Code MVDIN401 MVDIN406
A 19,1 19,1
Size 1/2" M30
D 50 50
L1 50 50
D 50 63
L 53,4 57,4
ER collet chuck holder Code MVDIN431 MVDIN432
A 19,1 19,1
Collet type ER32 ER40
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 22
22
Tool holders ISO 40 BT Type “Denver”, “VEM”, “Thibaut”, “Helios”, “Park Industries” Grinding wheel holder Code MVVE111 MVVE122 MVVE112 MVVE123 MVVE113 MVVE114 MVVE115 MVVE124 MVVE125 MVVE116 MVVE117 MVVE121 C MVVE126 L
A 27 27 27 27 27 27 27 27 27 27 27 27 27
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 34 39 47 80 45 5 6 holes 5 6 holes
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Pull stud Code MVVE900 MVTH900
Type L M16 angle 45° 60 M16 57
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 23
23
Tool holders ISO 40 BT Type “Denver”, “VEM”, “Thibaut”, “Helios”, “Park Industries”
Drill point holder Code MVVE101 MVVE103 MVVE106
A 27 27 27
Size 1/2" 1/2" M30
D 45 45 45
L1 23 45 23
ER collet chuck holder Code MVVE131 MVVE132
A 27 27
Collet type D ER32 50 ER40 63
L 72,5 76,25
For ER collets see page 31 For wrenches see page 30 For ring nuts see page 30
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 24
24
Tool holders with coupling 1/2 Gas Grinding wheel holder Code MV12G212 MV12G213 MV12G215 MV12G216 MV12G217 MV12G221
A 20 20 20 20 20 20
D 22 22 35 35 45 50
L 39 80 39 80 45 5
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Drill point holder Code MV101 MV102 MV106 MV109
Size 1/2" 1/2” M30 M30
D 40 40 40 40
L1 80 120 80 120
ER collet chuck holder Code MV12G100 MV12G160
Collet type ER16 ER25
D 22 42
L1 40 40
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 25
25
Test bar and Tool holders for diamond powders Bar for testing machine electric mandrel precision. Code MVISO40 MVISO50 HSK63A29112 HSK80B29112
Cone ISO40 ISO50 HSK63A HSK80B
D 40 50 40 50
L 300 300 300 300
Prices for diamond electrodeposition for drill points and corers. Beyond studied products, we make pieces on drawing too.
Drill points Code MV 1004 MV 1006 MV 1008 MV 1010 MV 1012 MV 1014 MV 1016 MV 1018 MV 1020 MV 1022 MV 1024 MV 1026 MV 1028 MV 1030
D 4 6 8 10 12 14 16 18 20 22 24 26 28 30
L 80 80 80 80 80 80 80 80 80 80 80 80 80 80
D 40 50 60 80 100 150 180 200
L 60 80 100 100 100 100 100 100
Corers Code MV2040 MV2050 MV2060 MV2080 MV2100 MV2150 MV2180 MV2200
Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 26
26
Pull stud angle 15° DIN 69872 release kit and fingers
CODE
ISO
d1
d2
d3
d4
d5
d6
l1
l2
l3
l4
l5
s
140002Y
30
13
9
17
13
M12
3
44
24
19
15
4
14
140006U
40
19
14
23
17
M16
7
54
26
20
21
4
19
140008E
45
23
17
30
21
M20
8,5
65
30
23
27
5
24
140010T
50
28
21
36
25
M24
11,5
74
34
25
30
5
30
140014K
60
40
30
52
32
M30
14
90
40
30
38
6
46
CODE P2002 P2004 P2006 P2008 P2010
ISO 30 40 45 50 60
Holding devices for tool holders on the machine loader. A
C
KIT COMPOSITION: A B C D E
- Pneumatic lungs - Set of bower springs - Connecting rod - Spacer - Stopping device for bower springs
B E D
These devices are costum-made according to machine manufacturers’ drawings.
Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 27
27
Petal collets Type SSKK-DIN, SSKK-ANSI
CODE ISO ØA H7
ØB
ØD ØR min
AG
g
mm
mm
mm
mm
mm
M10
...
mm
P1122 30 19 17,8(+0,1) 19,5 24
L P min
N
mm mm mm
T
Z
V
Øn
C
Hstd
FS max
M
EX
mm
mm
mm
mm
mm
mm
kN
Nm
mm
37(-0,1) 7,5
3,5
4
20,5
2,5
10
30
6
50
47
20
P1124 40 28 26,4(+0,1) 28,5 35 M16x1,5 M8
76
65
22 43,5(-0,1) 9
4,5
7
35,5
3,5
18
65
8
P1126 45 36 33,7(+0,1) 36,5 45 M18x1,5 M8
84
75
30
50(-0,1)
12
4,5
7
41,5
3,5
25
110
8
P1128 50 43 44,4(+0,1) 43,5 54 M22x1,5 M10 95
87
30
50(-0,1)
14
5
9
49,5
3,5
35
160
10
6,5
15
63,5
6,5
70
450
17
P1130 60 62 58,6(+0,1) 62,5 74 M30x1,5 M16 115 110 35 72,5(-0,1) 18
CODE ISO ØA H7
ØB
ØD ØR min
AG
g
mm
mm
mm
mm
mm
mm
L P min
N
mm mm mm
T
Z
V
Øn
C
Hstd
FS max
M
EX
mm
mm
mm
mm
mm
mm
kN
Nm
mm
P1134 40 28 26,4(+0,1) 28,5 35 M16x1,5 M8
76
65
22 43,5(-0,1) 9
4,5
7
45,5
3,5
18
65
8
P1136 45 36 33,7(+0,1) 36,5 45 M18x1,5 M8
84
75
30
50(-0,1)
12
4,5
7
50,5
3,5
25
110
8
P1138 50 43 44,4(+0,1) 43,5 54 M22x1,5 M10 95
87
30
50(-0,1)
14
5
9
58
3,5
35
160
10
6,5
15
65,5
6,5
70
450
17
P1140 60 62 58,6(+0,1) 62,5 74 M30x1,5 M16 115 110 35 72,5(-0,1) 18
Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 28
28
Petal collets Type SSK-DIN, SSK-ANSI
COD ISO ØA H7
ØB
ØD ØR min
AG
g
mm
mm
mm
mm
mm
M10
...
mm
P1102 30 19 17,8(+0,1) 19,5 24
L P min
N
mm mm mm
T
Z
V
Øn
C
Hstd
FS max
M
EX
mm
mm
mm
mm
mm
mm
kN
Nm
mm
37(-0,1) 7,5
3,5
4
19,5
3,5
10
30
6
50
47
20
P1104 40 28 26,4(+0,1) 28,5 35 M16x1,5 M8
76
65
22 43,5(-0,1) 9
4,5
7
34
5
18
65
8
P1106 45 36 33,7(+0,1) 36,5 45 M18x1,5 M8
84
75
30
50(-0,1)
12
4,5
7
38
7
25
110
8
P1108 50 43 44,4(+0,1) 43,5 54 M22x1,5 M10 95
87
30
50(-0,1)
14
5
9
45
8
35
160
10
6,5
15
70
450
17
P1110 60 62 58,6(+0,1) 62,5 74 M30x1,5 M16 115 110 35 72,5(-0,1) 18
CODE ISO ØA H7
ØB
ØD ØR min
AG
g
mm
mm
mm
mm
mm
M10
...
mm
P1112 30 19 17,8(+0,1) 19,5 24
L P min
N
mm mm mm
59,5 10,5
T
Z
V
Øn
C
Hstd
FS max
M
EX
mm
mm
mm
mm
mm
mm
kN
Nm
mm
37(-0,1) 7,5
3,5
4
33
2,5
10
30
6
50
47
20
P1114 40 19 26,4(+0,1) 28,5 35 M16x1,5 M8
76
65
22 43,5(-0,1) 9
4,5
7
44,8
4,2
18
65
8
P1116 45 36 33,7(+0,1) 36,5 45 M18x1,5 M8
84
75
30
50(-0,1)
12
4,5
7
48
6
25
110
8
P1118 50 43 44,4(+0,1) 43,5 54 M22x1,5 M10 95
87
30
50(-0,1)
14
5
9
54,5
7
35
160
10
6,5
15
62
10
70
450
17
P1120 60 62 58,6(+0,1) 62,5 74 M30x1,5 M16 115 110 35 72,5(-0,1) 18
Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 29
29
Digital height measuring device, cone cleaner and trolley 1- Measuring range 12” / 300 mm 2- Counter zero-adjustment at any height within the measuring range 3- Precision 0,0005” / 0,01 mm 4- Selector in inches/millimeters
CODE M102 M103 M121 M132
CONE-SHAPED BASE ISO 40 ISO 50 HSK 63A HSK 80B
It easly and rapidly cleans the machine cone. Special cotton strips for avoiding damages to the machine cone. CODE Description VEVTW40 ISO 40 VEVTW50 ISO 50 VEVTK63 HSK 63A VEVTK80 HSK 80B
TOOL HOLDERS BACK ANGLE PLATE
It is made up of fire painted sheet and (during the assembly phase) it is possible to set one or more levels. On one of the two sides there is an angle plate for holding wrenches and other tools. It is available in the following versions: VEVTT-2 ISO 30 • VEVTT-2 ISO 40 • VEVTT-2 ISO 50 • VEVTT-2 HSK 63A • VEVTT-2 HSK 80B.
Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 30
30
Ring nut for collet chuck holder, tooling clamper Right ring nuts Code W986DN W987DN W990DN W993DN
Collet type ER16 ER25 ER32 ER40
Size 01-10 mini 03-16 03-20 04-26
Wrench Code 97730S 97731A 97733B 97735C
Collet ER16 mini ER25 ER32 ER40
Rotary tooling clamper IMS Code VE130 VE140 VE150 VE160
Type Flange D=50 Flange D=63 Flange D=97.5 Flange D=100
Tooling clamper 30째 IMS Code VE230 VE240 VE250 VE260
Type Flange D=50 Flange D=63 Flange D=97.5 Flange D=100
Tooling clamper 90째 IMS Code VE330 VE340 VE350 VE360
Type Flange D=50 Flange D=63 Flange D=97.5 Flange D=100
Special tool holders are made on request.
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 31
31
Collet chuck 2/10-3/16-3/20-3/26 ER type 16-25-32-40 DIN 6499B
ER16
ER25
Collets code cap. 2-10 D 99848LN 99850MN 99832AN 99834BN 99836CN 99838DN 99840EN 99842FN 99844GN 99846HN
99851N
17 17 17 17 17 17 17 17 17 17
L 27,5 27,5 27,5 27,5 27,5 27,5 27,5 27,5 27,5 27,5
10 collets series
Collets code cap. 3-16 D
L
99901AN 99902BN 99903CN 99904DN 99905EN 99906FN 99907GN 99908HN 99909LN 99910MN 99911NN 99912PN 99913QN 99914RN
35 35 35 35 35 35 35 35 35 35 35 35 35 35
99915T
ER40
ER32
26 26 26 26 26 26 26 26 26 26 26 26 26 26
14 collets series
Collets code cap. 3-20 D
L
99916SN 99917TN 99918VN 99919ZN 99920AN 99921BN 99922CN 99923DN 99924EN 99925FN 99926GN 99927HN 99928LN 99929MN 99930NN 99931PN 99932QN 99933RN
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
99934B
33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33
18 collets series
Collets code cap. 3-26 D
L
99936VN 99937ZN 99938AN 99939JN 99940BN 99941CN 99942DN 99943EN 99944FN 99945GN 99946HN 99947LN 99948MN 99949NN 99950PN 99951QN 99952RN 99953SN 99954TN 99955VN 99956ZN 99957WN 99959AN
46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46
99958C
These collets are coated with anticorrosion niploy. Special tool holders are made on request.
41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41
23 collets series
d 2-1 3-2 4-3 5-4 6-5 7-6 8-7 9-8 10-9 11-10 12-11 13-12 14-13 15-14 16-15 17-16 18-17 19-18 20-19 21-20 22-21 23-22 24-25 25-26 26-27
CatalogoMarmoINGLESE_interno.qxd:Ims
19-04-2008
20:17
Pagina 32
32
Protective treatments
NIPLOY Coolants used in processing marble, glass and stone are a mixture of water and chemicals. While coolants are effective inaiding the processing of the products, these chemical agents are highly corrosive to metal. To avoid these oxidation and corrosion problems, every exposed surface of our tool holders are coated with “niploy�, a special process based on the chemical deposition of nikel. This nikel coating process leaves micro-particles on the surface of the tapered cones that are not measurable with standard tools.
Niploy coating
COD. MVOO1
Grinding operation after niploy coating
COD. MVOO2
STAINLESS STEEL TOOL HOLDERS To avoid corrosion due to the coolant, tool holders are made in stainless steel in a special alloy. This particular alloy has magnetic properties; with the interaction of the coolant become yellow for oxidation but the rust do not penetrate deeply.
Special tool holders are made on request.
19-04-2008
19:54
Pagina 4
Graphic design: www.rossanoadv.com
CopertinaMarmoINGLESE2008.qxd:Layout 1
via Vittorio Emanuele, 103 12048 Sommariva Bosco (CN) Italy Tel. +39 0172 54015 Fax +39 0172 54014 www.ims.eu | ims@ims.eu