April 2010
ABN 56 925 295 919
Warehouse: 4 Frazer Street, Lakemba, NSW 2195 Postal Address: PO Box 6212 Lakemba Dist Centre Ph. 1300 350 351 Fax. 1300 350 454 email. info@fabre.com.au Web. www.fabre.com.au *Prices valid till 30th April 2010 or until soldout
NEW PRODUCT Powerfire™ Ignition System The new Powerfire Ignition System represents the latest state-of-the-art technology in ignitions. Look at this list of terrific features coupled with a price that can’t be matched for any other top of the line ready-to-run ignition system: • • • • • • • • • • •
Easy 3-wire install with no external spark box necessary. Precision CNC machining and hand assembled construction. Patent pending positive lock manual advance/retard knob. Distributor can be accurately advanced or retarded in 1/2-degree increments on the fly by turning the external adjustment knob. Each click of the knob provides a 1/2-degree change to total ignition timing. This makes getting an accurate setting extremely easy. Accurate super hot spark all the way through 10,000 RPM. Hardened steel .50” diameter steel shaft with sealed roller bearing upper support and bronze bushed lower support for extreme stability at maximum rpm. Powerful magnetic pickup and CNC machined reluctor pickup. Fully adjustable advance mechanism with easy to use spring and bushing design for a nearly infinite advance curve. POWERFIRE module built in for drop-in reliability from 50 to 10,000 RPM. Hot cranking spark as low as 50 RPM. Black anodized base with laser etched timing marks for easy visibility. High quality injection molded caps with brass terminals for long life and conductivity.
30000 Powerfire I for 262-454 Chevrolet V8
$CALL
Throttle Bodies for LS1/LS6 Professional Products line of throttle bodies are generally considered by the performance industry as the highest quality throttle body available. These throttle bodies are precision engineered and many of them are made of aluminum die castings which is the same process used by the original equipment manufacturers. Those not die castings are made from permanent mold castings, a superior casting process to the sand casting used by all other aftermarket throttle body manufacturers making cast throttle bodies. Additionally, not only is the Professional Products Power line of throttle bodies the best quality, they are also the least expensive.
69726 Holden LS1-6 polished throttle body 85mm $CALL