Balustrades assembly instructions - Alba colors inox circle - en

Assembly instructions ALBA COLORS INOX CIRCLE BALUSTRADE

ARCHITETTURE TRASPARENTI

ARCHITETTURE TRASPARENTI

How to mount the ALBA COLORS INOX CIRCLE system

1

min.50

min.50

Hole Ø14

Mounting on reinforced concrete: Mark and drill according to the hole interaxis of the glass sheets and the type of fixing used.

2 Allow the fixings to protrude approximately 21 mm

Chemical resin

Possible irregularities on the masonry

Allow the fixings to protrude approximately 21 mm Clean the holes from dust; apply chemical resin; insert the M12x140 rods; allow the fixings to protrude approximately 21 mm from the masonry.

*) Ø14 in case of M13-AC-08 threaded rod M12x140 (current example)

How to mount the ALBA COLORS INOX CIRCLE system

3 Washer M12

Internal boss

Nut M12

32

Internal boss fixing adjustment

Slot for horizontal or vertical adjustment

When the resin is dry, insert the internal boss on the fastener up to the LA BORCHIA ESTERNA 4 AVVITARE masonry. Insert the washer, the nut, adjust and tighten.

4

INSERIRE IL PRIMO SPESSORE E LA BOCCOLA REGISTRARE LE 4 (6) BORCHIE ESTERNE IN MODO CHE SIANO COMPLAN LA BORCHIA ESTERNA 4 AVVITARE INSERIRE IL PRIMO SPESSORE E LA BOCCOLA REGISTRARE LE 4 (6) BORCH

R09-B Minimum distance glass-wall 35 R09-C Minimum distance glass-wall 51

R09-B 35

Align the glass support surfaces on an ideal plumb flat surface using the depth adjustments of the accessory.

Possible irregularities on the masonry

50 R09-C

(current example)

51

R09-B Maximum distance glass-wall 50 R09-C Maximum distance glass-wall 65 Screw the external boss, insert the first spacer and the bushing, adjust the 4 (6) bosses so that they are coplanar. Leave a few adjusting millimeters between the boss and the masonry for any subsequent adjustments (both positive and negative).

65

ARCHITETTURE TRASPARENTI

ARCHITETTURE TRASPARENTI

How to mount the ALBA COLORS INOX CIRCLE system

5 Adjustment eccentric bushing

Center the holes on the glass using the eccentric bushing of the accessory, in order to have an optimal positioning of the glass itself and recover any 5 MONTARE IL SECONDO SPESSORE, IL displacements of the hole on the wall.

COPERCHIO ESTERNO E SERRARE.

6

ONDO ORE, ILSPESSORE, IL ERNO ARE. E SERRARE.

Mount the second spacer, the outer cover and tighten.

50

h

da 37 a 60

How to mount the ALBA COLORS INOX CIRCLE system

TECHNICAL DATA SHEET

da 1000 a 1100

da 1300 a 1400

da 21 a 25

esempio variabile max 1150

50

h solaio min 120

References for processing glass sheets da 37 a 60

from 21 to 25

a 250

da 200 max 800 a 250

Ø26

max max 800 200

da 200 a 250

HOLE A 10 or 12 1,52 PVB 10 or 12

max da 200 750 a 250

max 200

da 1000 a 1100

from 1000 to 1100

h solaio

h floor

min 120

A

variabile

da 1000 a 1100

A

50

h floor

200 da 200

A

from 35 to 65

class 200 kg/m VALID IN ITALY

esem ARCHITETTURE TRASPARENTI

1100

REV 01-10/2023

FARAONE SRL ARCHITETTURE TRASPARENTI SEDE via Po 12 - 64018 Tortoreto Lido (TE) T 0861 784200 F 0861 781035 @ faraone@araone.it WEB www.faraone.it

400

200

B

A

50

B

min 50

A

min 120

Ø26

A

from 1300 to 1400

da 21 a 25

min 120

esempio variabile

h solaio

20

from 1000 to1100

from 1300 to 1400

20