Assembly instructions ALBA COLORS INOX SQUARE BALUSTRADE
ARCHITETTURE TRASPARENTI
ARCHITETTURE TRASPARENTI
How to mount the ALBA COLORS INOX SQUARE system
1 min.50
Hole Ø14
min.50
Possible irregularities on the masonry
Mounting on reinforced concrete: Mark and drill according to the hole interaxis of the glass sheets and the type of fixing used.
2 Allow the fixings to protrude approximately 21 mm
Chemical resin Possible irregularities on the masonry
Allow the fixings to protrude approximately 21 mm Clean the holes from dust; apply chemical resin; insert the M12x140 rods; allow the fixings to protrude approximately 21 mm from the masonry.
*) Ø14 in case of M13-AC-08 threaded rod M12x140 (current example)
How to mount the ALBA COLORS INOX SQUARE system
3 Washer M12
Internal boss
Nut M12
32
Internal boss fixing adjustment
Slot for horizontal or vertical adjustment
When the resin is dry, insert the internal boss on the fastener up to the masonry. Insert the washer, the nut, adjust and tighten.
4 R09-D Minimum distance glass-wall 35 R09-E Minimum distance glass-wall 51
R09-D 35
Align the glass support surfaces on an ideal plumb flat surface using the depth adjustments of the accessory. Possible irregularities on the masonry
50 R09-E
(current example)
51
R09-D Maximum distance glass-wall 50 R09-E Maximum distance glass-wall 65 Screw the external boss, insert the first spacer and the bushing, adjust the 4 (6) bosses so that they are coplanar. Leave a few adjusting millimeters between the boss and the masonry for any subsequent adjustments (both positive and negative).
65
ARCHITETTURE TRASPARENTI
ARCHITETTURE TRASPARENTI
How to mount the ALBA COLORS INOX SQUARE system
5 Adjustment eccentric bushing
Center the holes on the glass using the eccentric bushing of the accessory, in order to have an optimal positioning of the glass itself and recover any displacements of the hole on the wall.
6
Mount the second spacer, the outer cover, the bolt and tighten.
How to mount the ALBA COLORS INOX SQUARE system
TECHNICAL DATA SHEET References for processing glass sheets
max 1150 esempio variabile
00
200 da 200 a 250
da 200 max a 800 250
Ø26
A max da 200 200 a 250
A
max 800
HOLE A
max 200
min 120
from 1000 to 1100
from 35 to 65
class 200 kg/m
10 or 12 1,5 PVB 10 or 12
1,52 PVB
da 200 a 250
max 750
50
B
A
h floor
B
200
A
h floor min 120
A
min 50
A
50
Ø26
variabile
da 1000 a 1100
da 21 a 25
min 120
esempio variabile
from 1300 to 1400
from 1000 to 1100
20
h solaio
20
from 1300 to 1400
20
from 21 to 25
VALID IN ITALY
10 1,52 PVB
10
max 1200
esem
ARCHITETTURE TRASPARENTI
REV 01-10/2023
1100 1400
da 1000 a 1100
00 a 1400
FARAONE SRL ARCHITETTURE TRASPARENTI SEDE via Po 1220- 64018 Tortoreto Lido (TE) T 0861 784200 F 0861 781035 @ faraone@araone.it WEB www.faraone.it