Farmers Guide July 2019 by Farmers Guide

Farmers Guide

Farmers Guide www.farmersguide.co.uk

July 2019

• Issue No. 479

FREE for farmers

July 2019 • Issue No. 479

Illuminate your wheat with a touch of magic!

KWS FIREFLY n n n www.farmersguide.co.uk 1-37 July.indd 1

The UK’s highest yielding Group 3 with uks for export Great disease package, including 7.0 for Septoria and OWBM The joint stiffest variety on the Recommended List

www.kws-uk.com

21/06/2019 15:14

CALL TODAY

MOWER RANGE

Finance* & Special Offers Available

Visit us at the:

ROYAL WELSH SHOW

Stand G434 July 22nd - 25th

17˚

*Offer Available in Mainland U.K. Only. Terms and Conditions Apply. For Full Details Contact McHale.

Superior Floatation. Exceptional Results.

Scotland & N. England

07796 148 769

Midlands & Wales

07850 373 145

Superior Floatation

1” Drive Gears

Heavy Duty Bed

+ +

Heavy Duty Cutter Bar

Patented Active Spring Compensator

Superior Forage Solutions

1-37 July.indd 2

NDAR AS STA

500 mm Up / Down Movement

CALL TODAY

NDAR AS STA

Quick Change Blades 2 Speed Conditioner with Mechanical Drive

Southern England

07585 755 559

2 3

www.mchale.net

21/06/2019 15:16

Finance and production director Julie Goulding julie@farmersguide.co.uk Editor Dominic Kilburn dominic@farmersguide.co.uk

In this month’s issue Manitou’s NewAg telescopic handler tested

26-page report from the Cereals event

Machinery editor

In this David month's Williamsissue david@farmersguide.co.uk

Sales manager Greg Goulding greg@farmersguide.co.uk 01473 694454 Advertising sales executive Jana Moyes jana@farmersguide.co.uk 01473 694457 Advertising sales executive Joanna Blower joanna@farmersguide.co.uk 01473 694452

Sussex demo highlights New Holland green harvest line-up

Vegetable & Root Crops

Advertising sales executive Nicki Waters nicki@farmersguide.co.uk 01473 694456 Advertising sales executive Chloe Fulcher chloe@farmersguide.co.uk 01473 694451 Advertising sales executive James Brinkley james@farmersguide.co.uk 01473 691888 Advertising sales executive Samantha Wilson samantha@farmersguide.co.uk 01473 694455 Database and Farmads manager Sophie Brough reception@farmersguide.co.uk 01473 694453 Studio manager Simon Kotz studio@farmersguide.co.uk

99 Out & About .....................................................................................5 Comment ..........................................................................................6 Arable: OSR varieties highlighted at Cereals...............................8 A visit to Bayer’s Dekalb breeding centre in France.........................................................................................12 KWS wheat in focus at Cereals event ...........................16 Corteva’s pipeline fungicide Inatreq in action..........18 New soil nutrient scanning and mapping system..26 Series: Grass Weed Action – Couch ...............................33 Water company helping farmers take environmental steps............................................................35 Machinery: Manitou’s NewAg telescopic handler on test ...........39 Krone’s BiG X line-up in the Scottish Borders............45 Amazone UK’s brand new Doncaster headquarters ..........................................................................55 Machinery lots make strong money at Cambs dispersal sale ...........................................................................60

115 Ben Burgess celebrates new depot in Cambridgeshire .....................................................................95 Sussex demo highlights New Holland green harvest line-up .......................................................................99 RW Crawford investment to benefit southern farmers....................................................................................102 Special Features: 26-page Cereals event review .........................................69 Fertilisers & Spreaders including Power on the Land .................................................................................107 Vegetable & Root Crops ..................................................115 Fruit & Viticulture................................................................133 Septic Tanks – don’t fall foul of new regs .................139 Livestock .......................................................................................142 Agricultural Contractors.........................................................146 Henry Brown’s Vintage Page ................................................150 Classified .......................................................................................151 Recruitment including About People ..............................224

For Farmads and general enquiries call 01473 691888

CPD points code for Farmers Guide up until 31/5/20:

ISSN: 2053-5414

Published by Early Bird Farming Publications Ltd from its office at Parkside, London Road, Ipswich, Suffolk IP2 0SS – Tel 01473 691888; www.farmerguide.co.uk. Original articles and advertisements created by Farmers Guide are copyright and are not to be reproduced in any form without the written permission of the Editor. No responsibility can be accepted by Farmers Guide for the opinions expressed by its contributors.

CPD/84132/1920/G

what you need, when you need it. just replace the jigsaw piece

sales@ellismachinery.co.uk

01926 640 637

www.ellismachinery.co.uk

July 2019 www.farmersguide.co.uk

1-37 July.indd 3

25/06/2019 16:40

Road oriented Steel belts Excellent self-cleaning features Fuel Economy High speed

FL 693M

TO FIND YOUR LOCAL BKT DEALER PLEASE CONTACT: Tel: 0151 728 3714 enquiries@kirkbytyres.co.uk www.kirkbytyres.co.uk

1-37 July.indd 4

21/06/2019 15:17

Out & About with the Farmers Guide editors

Potato storage just got that much harder There was a certain inevitability about the news that reached us in late June that the European Union’s Health and Food Safety Directorate – General Appeal Committee concluded that approval for chlorpropham (CIPC) for use as a herbicide and a sprout suppressant, cannot be renewed. CIPC has been under review for several years now and while its loss will present some serious challenges to farmers, store managers and the potato industry at large, it cannot have been a surprise to many. According to AHDB Potatoes, the regulation specifies that all member states will have to withdraw authorisations of products containing CIPC by 8th January 2020, and the maximum grace period for use, storage and disposal shall expire on the 8th October 2020 at the latest. It will be up to the UK’s CRD to decide on specific dates for UK final use, but it is expected it will follow the EU position. It will be illegal to use CIPC in the UK beyond the end dates and growers and store managers are advised to check with their supply chain partners/ customers prior to treating crop with CIPC, adds AHDB Potatoes. An article which appeared in Farmers Guide March 2019 edition (p19) clearly outlines sprout suppressant alternatives to CIPC, and would be a good starting point for options to consider once CIPC has been withdrawn. The article can also be found on the Farmers Guide website (search CIPC).

The driver, confused, said to him: “Officer, I don’t understand, I was doing exactly the speed limit! What seems to be the problem?” “Madam,” the officer replied, “you weren’t speeding, but you should know that driving slower than the speed limit can also be a danger to other drivers.” The farmer’s wife replied: “Slower than the speed limit? No sir, I was doing the speed limit exactly....11mph!” The police officer, trying to contain a chuckle, explained to her that ‘M11’ was the road number, not the speed limit. A bit embarrassed, the farmer’s wife grinned and thanked the officer for pointing

Best in 100 years!

out her error. “But before I let you go, Madam, I have to ask if everyone in the car is OK? Your passengers seem awfully shaken, and they haven’t made a sound,” the officer said. “Oh, they’ll be all right in a minute officer,” she replied. “We’ve just come off the A120!” Thanks to Sam Griffin of ATV implement and accessory manufacturer, Logic, for providing this month’s joke. Do you have a joke to share? A Farmers Guide boot bag will be sent to anyone who gets one published in the magazine. Please send it to: dominic@ farmersguide.co.uk. ■

Soggy Cereals

And finally… Waiting between Bishop Stortford and Harlow to catch speeding drivers, a police officer saw an old farm Land Rover pottering along the M11 motorway at 11mph. He drove his patrol car on to the inside lane behind the Land Rover, turned on his blue lights and pulled the vehicle over. Approaching the car, he noticed that there were five old ladies inside; two in the front seats and three in the back – all wide eyed and white as ghosts.

NIAB has awarded its Centenary Cereals Cup to winter wheat Robigus, naming it the most influential UK cereal variety from the past 100 years. With the cup at Cereals are KWS wheat breeder Mark Dodds (left) and KWS managing director Andrew Newby.

Despite the torrential rain in Lincolnshire in mid June, the Cereals event went ahead as planned and, as ever, the Farmers Guide editorial team was on-hand to bring you the latest developments from the machinery and agronomy lines. We have produced a 26-page report in this edition, starting on page 69, and there are additional reports in the Arable section near the front of the magazine.

Equipment - Livestock - Feed - Fertiliser - Seed - Cash Flow Diversification Projects - Building - Debt Consolidation • Finance from £15k to £2m • Excellent rates • 6 Month to 5 year terms • Tax Efficient • Simple, quick phone application

• Decision within 24 hours • Bad credit history, large debts – No problem! • High street banks unsupportive • Tenant farmers welcome

We bring the personal touch back into farm finance. For the personal touch ring Dean Pollen on 07902 645650 or apply on line at www.abfltd.co.uk

66468

July 2019 www.farmersguide.co.uk

1-37 July.indd 5

26/06/2019 10:18

Comment

Celebrating 40 years of progress Short-strawed varieties changed the landscape of Britain as well as delivering higher grain yields.

midge (presumably because we grew many highly susceptible varieties) but in time this problem was overcome with the introduction of resistant varieties with Robigus becoming a major contributor of this valuable trait.

Quality wheats

Farmers Guide is celebrating 40 years of publishing this year – the first magazine was printed in September 1979. Here, wheat breeder Bill Angus looks back over the past 40 years and highlights some of the successes and challenges of wheat breeding and growing over that time, while looking to the future with optimism. The average farm wheat yield in 1979 was around 5.5t/ha and wheat looked a ‘very different animal’ to that growing today. Of course growers have seen yields increase significantly over this time (by 45 per cent) to an average of 8t/ha. This significant yield improvement came about through a combination of various factors driven by the introduction of new varieties. Following the Second World War the UK Government invested in breeding new varieties in the UK. In the 1940s, 50s and 60s the UK wheat acreage was dominated by French bred varieties – particularly Cappelle Desprez which was introduced in 1953 and dominated the UK landscape until the advent of new varieties from the Plant Breeding Institute in the 1970s – notably Maris Huntsman. However it was in 1979 that the UK Recommended List recorded the dominance of semi-dwarf wheats including Brigand, Virtue, Mardler, Hustler and Hobbit. These short-strawed varieties changed the landscape of Britain as well as delivering higher grain yields.

Agronomic challenges These new varieties led to agronomic changes which allowed their yield potential to be unlocked. Introduced in 1969, Cycocel allowed crop height to be reduced further and straw strength to be increased. Wheat diseases, once controlled by robust genetic 6

resistance, became prey to a range of systemic fungicides introduced in the 1970s. Nitrogen rates were raised to fuel yield increases and other technologies including better seed drills, tramlining and, more latterly, Global Positioning Systems (GPS) all contributed to more economic grain production through higher yields per hectare. Nitrogen use doubled in a 10-year period from the mid 1970s but stabilised in 1983, and yet yields continued to increase thereafter, showing the increased level of nitrogen efficiency in modern wheat varieties. New varieties became the bedrock upon which consistent high yields were developed. Key new varieties such as Slejpner (1986), Riband (1989), Brigadier (1993), Consort (1995), Claire (1999), Robigus (2003) and many others contributed to ever increasing yield potential. The period 1979–2019 was not however without its challenges. Septoria tritici became an endemic disease as the first semi-dwarf varieties, notably Longbow, Norman and Avalon were highly susceptible. These were followed by the ‘iconic’ variety Riband which was grown on 30 per cent of the acreage at one time. This variety was highly susceptible to Septoria tritici as was its successor Consort. With a vast array of chemistry available this disease was seen as only problematic rather than very serious. As we fast forward to today we would not hold this view now as we see resistance build up to fungicides. We also saw the arrival of wheat orange blossom

Apart from higher grain yield we have seen additional benefits through improved quality wheats. The first semi-dwarf bread making varieties such as Avalon and Mercia replaced the tall and low yield potential Maris Widgeon. This resulted in a major increase in UK grown wheat being used in the bread grist and a consequential decrease in expensive imports. Through the varieties Riband, Consort and Claire we saw new export markets develop in Portugal, Spain and Italy for soft biscuit wheats. Many distillers moved production from maize to soft milling wheat for the important whisky market. Some question the use of high input wheat growing systems but increased yield per hectare allows the release of land for other purposes.

Yield potential Though growers now look back upon these ‘halcyon days’ of rapid increases in yield, today they look upon farm yields that seem reluctant to increase. However we know that the yield potential of new varieties continues to increase, albeit at a more modest rate. So looking forward we need to understand why and how we can continue to make further improvements in wheat production and yet minimise environmental challenges. It is naïve to think that we can continue to sustain high yields in an organic rotation. This can play a part in the mix and new varieties are being assessed for this market. However the mainstay of production will be through better management of resources with more precise targeting of inputs and better timing of applications. New technologies such as precision sowing and better prediction of diseases and pests to enhance control strategies will play a part. Breeders will need to dig deeper into the vast array of genetic resources available to them to offer growers new varieties which will be targeted to particular growing regimes or UK regions, as well as more sophisticated end-user markets. There will be exciting developments in hybrid wheat which will add to the mix of genetic variation available to growers. The UK Recommended List has been at the forefront of new variety developments over the past 40 years. However we will be moving into a new era of wheat genetics and agronomy and this publication (currently under review) will need to meet this challenge to help growers make better decisions. Wheat genetics will become a more powerful force with regard to wheat growing, but we should not underestimate the contribution required from new agronomy practices to partner these new varieties. ■

www.farmersguide.co.uk July 2019

1-37 July.indd 6

24/06/2019 11:07

ARION 500/600 Thinking Ahead

PROACTIV front axle with increased carrying capacity and comfort levels and reduced maintenance.

CIS+ â&#x20AC;&#x201C; a new mid-range offering complete with electric programmable spools.

660 CMATIC model topping the range with 205hp CPM transport boost.

CEBIS touch screen.

The extended range 145-205hp, 6 cylinder ARION 600 and 125-165hp, 4 cylinder ARION 500 provide improved performance across a wider horsepower range with additional specification offerings. Think ahead, itâ&#x20AC;&#x2122;s your next choice of tractor.

For a demonstration, contact your local dealer or call the CLAAS Hotline on 01284 777666. claas.co.uk

1-37 July.indd 7

24/06/2019 11:04

Arable

OSR varieties for consideration performed better than others,” commented Mr Perry. “Pyrethroids are less effective now and aphid control has been waning for several years meaning that genetic resistance to TuYV is becoming an increasingly important factor.” Hybrid promising newcomers highlighted for the East & West included top yielding PT275 (104); DK Expansion (102) and George (102) – both very good against stem canker. Aspire starred again for the conventionals in the North (106) while hybrid DK Exsteel (104) – is good for light leaf spot and very good for stem canker.

Top Candidates

Winter oilseed rape variety selection is always a theme on NIAB’s stand at Cereals, and last month’s event was no different. Dominic Kilburn writes. As ever, oilseed rape variety specialist Simon Kightley had produced his analysis for maximising yield and spreading the risk at Cereals 2019, based on published ratings and personal observations, however this year it was NIAB’s centre manager for the West, Mike Perry (right), who led Farmers Guide through the options.

Tried and tested When considering the so-called ‘established’ oilseed varieties on the Recommended List (four years or more in trials), Mr Perry suggested that the top yielders, although separated by a percentage point or two, were all on a par in terms of yield – whether conventional or hybrid – and so other factors have to come in to play when considering selection for this autumn’s drillings. “Flea beetle is, of course, the key talking point for oilseed rape growers and it does need to be emphasised that a decent seedbed, with moisture, and good seed-to-soil contact are vital to get varieties established as soon as possible after drilling,” he commented, adding that, in general, hybrids do show better autumn vigour. For the East & West region, low biomass Windozz

(yielding 104 per cent), Alizze and Wembley (both 102) were selected as Mr Kightley’s ‘tried and tested’ hybrids, while Alizze was also selected as a key hybrid option for the North (100) – its good performance against light leaf spot highlighted. For the conventional varieties in the tried and tested category (East & West), Elgar (103) – also with good resistance to light leaf spot; Flamingo (102) – good against light leaf spot and with high oil content; and Nakita (101) – good light leaf spot resistance, short and with high oil content. Elevation (104) – short and stiff; and Barbados (102) – good disease resistance, were selected as the conventional varieties for the North.

Promising newcomers Those that have been in trials for three years, and labeled as ‘promising newcomers’ for the East & West on Mr Kightley’s chart included conventional Aspire (104) – short and stiff, good against light leaf spot and TuYV resistant; and Ballad (104) – another high yielder, also good against light leaf spot. “There’s clear evidence now that we’ve had TuYV in trials without realising to what extent, and so varieties such as Aspire that have resistance have

Elevation WINTER OILSEED RAPE

While acknowledging that Candidate variety data is relatively limited following only two years in trials, Mr Perry suggested that conventional variety Acacia (110) and hybrid Aurelia (109) were varieties to watch out for across East & West and North regions (106 and 103 respectively). Acacia he said had a high gross output, was a short and stiff variety while Aurelia was another to offer TuYV resistance and was looking very good against stem canker and light leaf spot. Another ‘A’ was Aardvark (106), a high gross output conventional Candidate for the North. Meanwhile, Candidate hybrid variety Crocodile (106) made the selection chart due to its resistance to club root. “Club root resistant varieties in the past were significantly lower yielding than standard conventional and hybrid types, but Crome (102 E&W, 103 N) broke that mould recently and others like Crocodile, which is similar agronomically to Crome, look set to follow. “Club root resistant varieties are one of the tools to deal with the disease but longer (5-year) rotations and correct soil pH levels are also important considerations in the overall battle to keep on top of it,” said Mr Perry. In terms of Clearfield varieties, he said that a gap in yield difference remained between the top performing Clearfield type PT279CL – 97 (E&W) and 93 (N) – and standard varieties, but they were continuing to deliver value in cruciferous weedaffected areas, as well as reducing the threat of erucic acid contamination from HEAR volunteers. ■

NEW

2018/19 Top Variety

• Highest GROSS OUTPUT variety in RL trials 2017 (AHDB) • Consistent and reliable yield performance • Conventional British bred variety • Bold seed, bold pods, bold yield

Please call your local merchant for more information 8

www.dlf.co.uk

www.farmersguide.co.uk July 2019

1-37 July.indd 8

23/06/2019 16:21

08345

FITTER FASTER STRONGER FROM SEED TO STORE Bred for its vigour to mitigate risks in establishment, InVigor ® enables you to plant oilseed rape with confidence. • Strong autumn vigour for rapid establishment • Outstanding resilience in tough conditions • Reliable performance

InVigor ®. You’ll be glad you planted it. To find out which InVigor® hybrid best suits your needs, visit agricentre.basf.co.uk/InVigor InVigor is a registered Trade Mark of BASF. If you have any queries or require further information, please contact your local BASF Agronomy Manager. Contact details can be found at agricentre.basf.co.uk. Or the BASF Technical Services Hotline: 0845 602 2553.

0834536_BASF_InVigour_press 297x210.indd 1 1-37 July.indd 9

10/05/2019 15:18 13:05 21/06/2019

Centium 360 CS

NO BUFFER ZONE RESTRICTION KEEP THE WHOLE FIELD CLEAN

Centium® 360 CS Herbicide • • • •

No buffer zone restriction Unique encapsulated formulation Reduced drift and volatility Controls cleavers, chickweed, shepherds purse, hedge mustard and more

USE PLANT PROTECTION PRODUCTS SAFELY. ALWAYS READ THE LABEL AND PRODUCT INFORMATION BEFORE USE. UNLESS OTHERWISE INDICATED, TRADEMARKS WITH ® OR ™ ARE TRADEMARKS OF FMC. CENTIUM® 360 CS CONTAINS - 360G/L CLOMAZONE

1-37 July.indd 10

21/06/2019 15:19

Arable

Breeding for lower inputs hybrids has been in response to market demands and provides a big step forward, said DSV product manager Alex Doering. Crop vigour has become crucial for growers looking for varieties which will grow away from cabbage stem flea beetle damage, but he also sees increasing importance of TuYV resistance. Ms Hawthorne added: “The developments allow us to build on a solid base of gross output and strong genetic resilience in the face of more variable growing conditions and the reduced chemistry UK growers now have at their disposal.” Sarah Hawthorne.

The first DSV ‘quad-layer’ oilseed rape varieties were announced at Cereals 2019. These varieties have a specific combination of genetic traits that helps build better disease resistance and yield protection. The gene-related characteristics include phoma stem canker, light leaf spot, turnip yellows virus (TuYV), clubroot, pod shatter, plus verticillium wilt tolerance and Clearfield, explained DSV UK’s Sarah Hawthorne. “You need to give your oilseed rape the best possible chance to get away. “The penalty for better disease resistance and agronomic functionality has historically been reduced yields, but modern hybrid breeding techniques are allowing us to quickly assimilate different genetic characteristics without yield drops.” Combining traits for these new

Group 4 wheat

FULLY LOADED

HYBRIDS

The new British-bred Group 4 wheat, DSV Theodore, is underlining its potential for high untreated yields. On the AHDB Candidate list for 2019/2020, it has shown untreated yields at 120 per cent of the control variety. “As with our new ‘layered’ oilseed, we are now developing wheats which effectively use genetics to replace the sprayer, so as much disease resistance and resilience is built into the crop rather than coming from constant and costly outputs,” said DSV UK managing director Mike Mann. “In the field, this is translating into very clean crops despite high disease pressure and, in many cases, untreated cases of Theodore actually look better than other varieties that have received a full fungicide programme.” The new variety has performed well during the past two dry years, but can cope with wet soils, he added. ■

UK-made pellet available Ironclad is the first UK manufactured ferric phosphate slug pellet, says Gemini Agriculture which sells the product in the UK. “Having a UK production site not only allows for rapid response to demand but also supports British farmers by using British wheat in the production process,” said Gemini Agriculture commercial manager, James Kennedy speaking at Cereals. Ironclad is approved for use on a wide range of crops including potatoes, cereals and OSR with up to 4 applications per crop and a maximum individual dose of 7kg/ha. Following the revocation of

metaldhyde farmers have lost a great deal of choice when it comes to slug control, not only in terms of active ingredient but also pellet formulation, he said, pointing out that the remaining registered slug pellets are all based on ferric phosphate. “Ironclad has come to market just in time to provide farmers and agronomists with choice. In Ironclad’s use of DuraTech, it offers an alternative formulation to other available ferric phosphate pellets. It is robust and reliable, and supplied at a competitive price that will help farmers to keep their cost of production down.” ■

AMBASSADOR

Highest yielding East/West Candidate @LGSeedsUK www.lgseeds.co.uk/ambassador Tel: 01472 371471 www.lgseeds.co.uk enquiries@limagrain.co.uk

1-37 July.indd 11

23/06/2019 16:24

Arable

OSR variety developments to excite The main breeding field at Boissay, France.

Farmers Guide visited Bayer’s expanded Dekalb breeding centre in Boissay, France to look into the next potential varieties both close to market and available for 2019. Heather Briggs reports. Strong, fast establishment and resistance to diseases and pod shatter are key characteristics Dekalb OSR breeder Matthew Clarke (right) is looking for in his work developing a pipeline of robust, high performance hybrids. Weather – too wet or too dry – can make growing the crop challenging, with pests like pigeons and slugs making it more so. And, since the banning of neonicotinoid seed treatments, there is also the devastating effect of cabbage stem flea beetle (CSFB) to consider. “The crops that do best under all these situations are invariably those that are quick to get away,” said Mr Clarke. “Vigorous establishment and very rapid spring and autumn development have become even more important in countering the threat of CSFB.” Recent work at Trumpington (Cambridgeshire) on Dekalb trials badly infested with flea beetle showed the fastest developing hybrids in both the autumn and spring are better able to tolerate damage from both adult beetles and larvae, he reported. “Varieties like DK Expedient stood out,” he said, adding that its speed of development is similar to Excalibur, making it an ideal choice if drilling is delayed or has to be done in less than ideal conditions as well as for the main drilling window. “However, if earlier sown on particularly fertile sites, its very rapid autumn growth habit means an autumn PGR may be valuable.” He went on to note that varieties

with the Clearfield herbicide resistance trait are also fast autumn developers. “Both DK Impressario CL and DK Imperial CL have shown themselves to be especially rapid in their early growth. “In addition, there have been no rejections for erucic acid issues with either of them.” Erucic acid levels can be problematic for crushers, and the current maximum level in most contracts is set to 2 per cent, with a soon-to-be-reduced legal limit of 5 per cent. Over the past three years, higher than expected levels have been found in many double-low crops, with some deliveries incurring significant penalties. As the Clearfield system ensures control of previous (non-CL) volunteers, it is especially valuable when HEAR varieties have been grown in the rotation, he explained. “Growers using our Clearfield varieties can take advantage of our free oil quality check at harvest. “This uses the most accurate gas chromatography to provide them with the best possible pre-delivery assurance on erucic acid content.”

bred. As it has also been shown to be high yielding in company trials across the UK, he expects it to become extremely popular. He also highlighted the potential of DK Exsteel, which has similar characteristics to DK Exstar but a slightly different growth habit. Alongside already widely-grown, DK Expansion, it joins the Recommended List for 2019/20. “DK Exsteel shares an ultra-rapid autumn development habit with DK Extrovert and DK Expedient. “DK Exstar and DK Expansion, on the other hand, are more akin to DK Exalte and DK Exclaim in their early leaf development. “Slightly later into stem extension and flowering than the earliest varieties, they are both very rapid in their spring growth. In addition, they all carry our vigorous establishment, double phoma and pod shatter resistance traits.” Moreover, he revealed, Delkalb is piloting an innovative support scheme with DK Exstar to share the financial risk of establishment with growers, which is expected to further add to its attraction. The recently-named DK Extremus is another of Matthew Clarke’s favourites – mainly for the yield predictability it has shown in trials across Europe. Like DK Exsteel, however, there will be limited seed available for 2019 planting.

The pace of improvement Following the merger between Monsanto and Bayer, the pace of allround winter OSR variety breeding has been stepped-up through the more sophisticated use and application of DNA information at Dekalb’s European breeding centre in Boissay.

Bayer now has the leading hybrid on the RL with a UK Recommendation, the leading hybrid on the RL with a North Recommendation and the only HOLL quality hybrid on the RL, pointed out Mr Clarke. Better technology for collecting genetic information and increased data processing capacity is helping to speed-up breeding progress with performance information from field trials as well as breeding trials correlated more accurately with environmental conditions. As a result, Dekalb oilseed rape varieties are now being purpose-built for specific regions with far better focused and more rapid progress targeted in traits like yield and stress tolerance, he said. “Until now, progress in improving these complex traits has been limited by the fact that they are governed by many genes, each with a relatively small effect. “This makes them far less responsive to traditional markerassisted selection than those controlled by major genes. “We have always known too that some parental combinations have a ‘magic’ factor that makes really good hybrids, whereas others do not work nearly as well, even though they have the same major trait combinations. “Employing genome-wide selection, we are now profiling our most successful hybrids so we can identify blocks of genes in our parent lines and estimate their breeding value with considerable accuracy. This is effectively turning traditional breeding on its head.” Alongside this approach Mr Clarke stressed that marker-assisted selection will continue to be an important means of introducing new traits into the Dekalb portfolio. “We have high yielding varieties

Most promising The most promising standard hybrid coming forward from Dekalb this season is undoubtedly DK Exstar, he added. The first mainstream variety to be rated 8 or better for phoma, light leaf spot and lodging resistance in official testing, Mr Clarke considers it the most complete variety he has ever Breeding glasshouse at Boissay.

12 www.farmersguide.co.uk July 2019

1-37 July.indd 12

23/06/2019 16:24

with our complete package of traits plus resistance to turnip yellows (TuYV) in the immediate pipeline, as well as Clearfield varieties with club root resistance,” he pointed out. “We are also tracking big differences in both tolerance and resistance to verticillium wilt in our varieties. Drought tolerance is another area where we see significant variation we can take advantage of, although this is not a priority objective in our programme at the moment.” Alongside genome-wide selection, much wider use of advanced techniques like di-haploid breeding to

ensure maximum parental purity and environment-controlled glasshouses to achieve two generations per year at the Boissay breeding centre are reducing the time taken to develop new varieties. “Our driving force is producing robust varieties that deliver continual improvements in all-round strength for growers rather than improvements in particular areas at the expense of others. “With our expanded facilities and the extra opportunities the very latest DNA-based breeding approaches provide, it is a very exciting time to be in oilseed rape breeding.” ■

New OSR herbicide launched Corteva Agriscience launched its new herbicide at Cereals stating that Belkar gives oilseed rape growers the option to switch from preventative to reactive autumn weed control strategies. Targeting cleavers, cranesbill, poppy, shepherds purse and fumitory, Belkar (Arylex Active + picloram) offers an alternative to traditional approaches which rely on pre-emergence control, says the company, which was separated from DowDuPont on 1 June. Growers can wait until the crop is out the ground giving themselves time to assess the visible weed pressure plus the impact of pests. “We mustn’t forget that in 2016 oilseed rape establishment was very good, but it has been followed by two difficult years,” said Corteva product manager, John Sellars. “Growers are looking for alternative strategies to help manage the risk in their own situations,” he said. John believes growers will be more cautious about front-loading their crop protection investment.

“Growers are happy to invest if they know they are going to have an output. Moving to a post-emergence regime means growers don’t decide on their herbicide spend until they know a crop is there,” he added. There are three treatment options which Corteva says have performed best in trials. At 2-true leaves an application at 0.25-litres/ha will take out the weeds which have germinated alongside the crop and, in some circumstances, that will be enough broad-leaved control before an application of Astrokerb (propyzamide + aminopyralid) or similar later on. In high weed pressure situations where a second germination is visible growers have the option of a second 0.25-litres/ha 2–4 weeks after the first application. In low pressure situations growers can wait until 6-true leaves of the crop and apply 0.5-litres/ha which will take care of the weeds going in to the autumn. The spray period is from 1st September to the end of December. ■

FULLY LOADED

HYBRIDS

AURELIA

Highest UK gross output hybrid Candidate @LGSeedsUK www.lgseeds.co.uk/aurelia A Belkar-treated plot of OSR at the Cereals event.

Tel: 01472 371471 www.lgseeds.co.uk enquiries@limagrain.co.uk

1-37 July.indd 13

23/06/2019 16:25

Arable

Early weed control can help with the flea beetle challenge With oilseed rape growers looking to increasingly squeeze their input costs on crops across the country, agronomists are rightly concerned that both pre- and post-emergence herbicides are used to their optimum efficacy and that money is not wasted on crops that either are not viable or do not have enough yield potential. Independent AICC consultant, Richard Cromie (right) of Hampshire based Crop Management Partners is adamant that caution must be exerted when planning an autumn herbicide strategy, where costs can run away if crops are not managed appropriately. “I actually aim to spend as little as possible,” he explains. “With the constant threat of flea beetle, not only at emergence but at the larval stage in the spring as well, the need to balance weed control with expenditure can often be a difficult

task. “The aim is get crops as quickly as possible to the three-leaf stage. To ensure this happens, the plants don’t need to be put under extra pressure and some mixes of herbicides, either applied pre- or early postemergence, can induce a lot of stress and leave the emerging crop exposed to further pest damage, or if the active ingredients are ineffective due to weather or soil conditions, weed competition.” In order to mitigate the effects of early herbicide-induced crop stress or even damage, Mr Cromie advocates a single pre-emergence application of Centium 360 CS (clomazone), which is highly immobile in soil and less likely to leach out, compared with other products. When applied at 0.25-litresha, this level of active ingredient is sufficient he believes, to control major competitive weeds such as cleavers and hedge mustard, as well as having additional, good broad-spectrum suppression of

annual meadow grass, chickweed, shepherds purse and fool’s parsley. Clomazone can also suppress blackgrass, sensitising it for follow-up applications. “The application of Centium 360 CS has little or no effect on emerging crops and that is vital if the flea beetle situation is going to be managed. Growers may see some cosmetic (chlorotic) bleaching of leaves, especially on overlaps, but that will grow out,” Mr Cromie explains. “We have been using the product very successfully for many years now and the bleaching, although visible, has never affected the crop’s ability to yield.”

Cost-effective Centium 360 CS works by inhibiting photosynthesis and the same symptoms can be identified on target weed species which lead to plant death, whereas in the crop the symptoms are transient and do not cause a yield penalty. “I find that a cost-effective dose of clomazone at this stage is sometimes all that’s needed,” he says. “Occasionally I might follow up

with an application of metazachlor in situations where there are populations of black-grass that need controlling, but generally it’s enough. If the crop then fails because of whatever reason, you haven’t spent the earth on it.” Mr Cromie has also had good results using companion crops to assist the rape establishment on certain farms, with clover, buckwheat and white mustard being the main species that ‘bank’ nutrients for the crop to use later on in its growth stages, although other anecdotal benefits have included reduced slug and flea beetle pressure. “Generally, most companion species we use have also proved to be tolerant to Centium 360 CS,” he adds. “This is even better news as they can develop properly, equally benefiting from reduced weed competition and allowing the emerging rape to be protected. We look to drill the rape approximately 7–10 days after the companion crop and to be honest, the results have been very encouraging and Centium 360 CS now appears to be an integral part of that strategy.” ■

Imagine… An autumn sown break crop that can deliver a gross margin of over £580 per hectare Imagine… A viable autumn sown alternative to Oilseed Rape that doesn’t suffer from flea beetle Imagine…

Winter Linseed For more details call Premium Crops on 02392 632883 www.premiumcrops.com a division of Cefetra Ltd

14 www.farmersguide.co.uk July 2019

1-37 July.indd 14

23/06/2019 16:26

HP10

HP1055883 - DEKALB - OSR 2019 Campaign UK - Product - EXSTAR - A4_3mmBleed v01_print.indd 1 1-37 July.indd 15

29.04.19 16:32 21/06/2019 15:20

Arable

Candidate wheat additions The list of Candidate wheats up for addition to the Recommended List (RL) this autumn is dominated by hard feed types. The stand-out variety is the hard feed KWS Kinetic which combines a high treated and untreated yield, good disease resistance and the best combination of protein, Hagberg falling number and specific weight of any Candidate

variety, says breeder KWS. At 105% of controls, its treated yield is at the top of the group, but it will be its stiff straw, early maturity and high specific weight that will capture grower interest, said the company’s Will Compson (right) speaking at Cereals last month.

KWS Kinetic.

KWS Parkin.

LOCK IN YOUR PROFIT The UK’s Number 1 Pod Sealant

KWS took the unusual step of releasing seed for multiplication before it completed national list trials meaning growers will have access to seed for commercial production this autumn, taking up to 1.5 per cent of the C2 market, he suggests. KWS Kinetic has orange wheat blossom midge (OWBM) resistance and has performed strongly in all regions though its highest yields have come in the East and West. At 83cm it is of average height. Another hard feed Candidate is KWS Parkin. It has a treated yield of 103% of controls and has performed strongly across all regions but has delivered its highest yields in the West and North. It is extremely stiff strawed while at 78cm it is one of the shortest varieties available. This is complemented by very early maturity, good allround disease resistance and good specific weight. Those seeking a new two-row winter barley may want to take a closer look at the RL Candidate, KWS Hawking. At 107% of controls it is the highest yielding Candidate in trials while, at 70.2kg/hl, it has a specific weight better than most of the varieties on the RL. It has performed consistently well across all regions with its best performances coming in the East and West. KWS Hawking has maturity equal to KWS Orwell. ■

Secure your crop yields with an application of Pod-Stik. A unique polymer sealer, it’s a simple and costeffective solution that will significantly reduce yield loss and increase profit. First launched in 2007, Pod-Stik was years ahead of the competition and it remains the best. Need to know more? Talk to your advisor or call De Sangosse on

01223 811215 or visit

desangosse.co.uk 16 www.farmersguide.co.uk July 2019

1-37 July.indd 16

23/06/2019 16:27

08345

O S R Let Clearfield® help you grow oilseed rape with confidence. • Removes sources of erucic acid coming from volunteers and brassica weeds • Impressive broad spectrum weed control • Wide range of high-performing hybrids • Rapid establishment

Clearfield® - The only complete OSR system. Ask your agronomist today or visit agricentre.basf.co.uk/Clearfield

Clearﬁeld is a registered Trade Mark of BASF. Always use plant protection products safely. Always read the label and product information before use. For further information including warning phrases and symbols refer to www.agricentre.basf.co.uk

1-37 July.indd 17 0834536_BASF_Clearfield_OSR_chosen ad_v3.indd 1

21/06/2019 30/04/2019 15:21 14:00

Arable

New fungicide gets closer to market

A new active ingredient targeting septoria and other key diseases in wheat is expected to be approved in time for applications in spring 2020, Corteva Agriscience announced at a special briefing in late June. Heather Briggs reports. Protectant, curative and with translaminar mobility, Inatreq fungicide activity starts within just half an hour of spraying, said Corteva Agriscience field technical manager Stuart Jackson. It then spreads in the leaf wax and stays there for many weeks, so when the fungus germinates, the fungicide is then drawn up, killing it. “It works by inhibiting respiration of the fungus, but at a different point from SDHIs and strobilurins, and it has no cross resistance to current chemistries used for septoria control,” he explained. Other diseases which are expected to be included on the label include yellow rust, brown rust, fusarium head blight, tan spot, powdery mildew and rhynchosporium. “When spray droplets land on the leaf there is a very rapid redistribution across and down the leaf ridges, giving 97 per cent cover. This means the chance of a spore landing on an unprotected area is very low, leading to consistent control, said Mr Jackson. “Because of the speed at which just one droplet is able to move to cover the leaf, including the tip, it will be possible to use low water volumes going down to 100-litres/ha and maintain a high forward speed without loss of efficacy, thanks to its unique formulation.” In trials held by the company for activity on brown rust, the fungicide demonstrated good translaminar movement, moving to the top of the leaf one day after inoculating the underside. When it comes to application timing, growers are expected to have good flexibility, from GS30 (ear at 1cm) to GS69 (flowering complete). “It is likely to be the product of choice at T2, but this will depend on varietal resistance and

local disease pressure,” continued Mr Jackson. “As the product is taken up by the plant, one of the benefits is the time it remains active in the plant.” While four weeks after T2, it was hard to see consistent difference between Inatreq and other leading products, company trials plots all showed Inatreq had more than 80 per cent efficacy after 6 weeks, creating a wide difference with competitor activity, he said. He is hoping that two applications of the fungicide per crop will be approved at registration, but admits this may be unlikely given the range of alternatives available. Initial registration will be for use on spring and winter wheat, triticale and rye, with the application for barley estimated to be given one or two years later.

Taking the pressure off SDHIs The active fenpicoxamid belongs to a new class of chemistry called the picolinamides, which has no cross-references to triazoles, strobilurins or SDHIs, he revealed. “It is a quinone inside inhibitor (Qii) and the only other use for this class of chemistry at the moment is for potato blight control.” However, insisted Mr Jackson, Inatreq is not effective on blight nor are the blight sprays effective on septoria. The fungicide is active on a unique target site, but as it is a single site, it will only be available in formulation with prothioconazole to help protect its efficacy. Nevertheless, it is expected to be an effective tool in the fight against resistance and, so far, no isolates have shown reduced sensitivity. Moreover, isolates resistant to epoxiconazole and pyraclostrobin showed sensitivity to Inatreq.

Corteva Agriscience field technical manager Stuart Jackson.

“We will be recommending Inatreq is used as part of an integrated crop management (ICM) strategy and in mixes which include azoles, strobilurins and SDHIs, so there is multi-site activity delivering broader spectrum disease control.

Natural source Developed from a secretion produced by a soil-borne streptomyces species called UK2A, the new fungicide is of natural origin. “Once we had discovered the efficacy, our next challenge was to make it photo-stable on the crop,” said Mr Jackson. “We found adding a hydroxy group overcame this problem, and the fungus and the plant then convert it back into UK2A, the active substance.” With a half-life in the soil of four days, it has a good environmental profile and does not affect soil bacteria, said Mr Jackson. “Having new modes of action available is essential and using them in conjunction with existing chemistry we can slow the development of resistance in other groups. “Inatreq is highly active on septoria and has both curative and preventative activity which is a key attribute in the battle to control the most difficult pathogen we have in UK wheat crops.” ■

18 www.farmersguide.co.uk July 2019

1-37 July.indd 18

25/06/2019 14:29

TOWERING

YIELDS

LG SKYSCRAPER

Highest Yielding Recommended Winter Wheat @LGSeedsUK www.lgseeds.co.uk/lg-skyscraper

AHDB Recommended List 2019/20

Tel: 01472 371471 www.lgseeds.co.uk enquiries@limagrain.co.uk

1-37 July.indd 19

21/06/2019 15:23

The Dynamic Wheat that’s out of this world!

KWS ZYATT n

The UK’s highest yielding Group 1 breadmaking wheat

Excellent disease resistance including good Septoria and Pch1

Superb second wheat

KWS UK LTD, 56 Church Street, Thriplow, Nr Royston, Hertfordshire, SG8 7RE Tel: +44 (0) 1763 207300 / Fax: +44 (0) 1763 207310 / Email: info@kws-uk.com

www.kws-uk.com

1-37 July.indd 20

21/06/2019 15:23

Arable

Approval for malt distilling use Benchmark your soil to identify it’s true potential With plateauing yields and organic matter depletion there is now a scientific solution that will help restore the health of your soil.

Our Healthy Soils Assessment will help you develop meaningful soil management strategies in order to unlock yield, improve soil health and long term sustainability.

CHMAR EN

A TEG TR

with a good specific weight does mean that LG Diablo fits the bill as a good feed barley variety.” Specific weight is important in the malting industry as malting is a volume-based process and low specific weights cause reduced throughput in the processing plants, points out Mr Shand. “So growers with low specific weight parcels will incur penalties if specifications are not met, particularly in times of overproduction. “Its hot water extract is a similar level to that of Concerto – a trait that helped Concerto to become a benchmark variety. Again, it’s about meeting the needs of the market as a high hot water extract is heavily desired by the end user in order for them to achieve higher sugar extraction rates from the malt and the ability to create more alcohol – and LG Diablo offers this. “Now that the variety has been given the green light by the industry for distilling, we believe that LG Diablo will fulfil the requirements of both grower and end users to become a key variety in the spring barley sector in the next couple of years.” ■

Spring barley LG Diablo has been given Full Approval for malt distilling use by the Malting Barley Committee, and has also been moved to Provisional approval 2 for brewing. This makes LG Diablo the highest yielding spring barley variety on the AHDB Recommended List with full approval for malt distilling, says breeder Limagrain UK. Based on its move to provisional approval 2 for brewing, if full approval for brewing is also obtained next year, LG Diablo will be the highest yielding dual-use spring barley, says the company’s UK arable wholesale sales manager, Matt Shand. LG Diablo’s UK yield sits 2 per cent above the current market favourites at 105% of control. Last year, LG Diablo out-performed other leading varieties such as RGT Planet and Laureate by a significant amount in the key malting barley growing areas across the East (106%) and North (107%) regions, in fungicide treated trials, he says. LG Diablo’s untreated yields also sit at the top of the yield table alongside Laureate at 94% of control, and 1% over that of RGT Planet, demonstrating the variety’s very robust disease resistance profile, says Limagrain’s technical arable manager, Ron Granger. “In terms of agronomic package, LG Diablo has straw characteristics similar to RGT Planet; medium in height (73cm) with good lodging and brackling resistance. Although rated slightly later maturing, this would not appear to have an effect regarding its high yield potential as seen in the very testing season of 2018. “The very high yield potential combined

TCOME OU

LG Diablo gains Full Approval for malting and P2 for brewing.

Conduct a Healthy Soils assessment to benchmark the biological, chemical and physical aspects of your soil.

Use the findings to create meaningful soil management strategies.

Measure the outcomes against your benchmark.

* Fully compatible with Omnia Precision Agronomy Software

LG Diablo at a glance Specific weight (kg/hl) Screenings (% 2.25mm) Screenings (% 2.50mm) Nitrogen content (%) Hot Water Extract (litre deg/kg)

LG Diablo RGT Planet 67.6 68.3 1.2 1.1 2.8 3.1 1.43 1.45 315.2 314.9

Laureate 66.8 1.3 3.0 1.47 315.1

Concerto 69.3 1.1 2.6 1.51 315.6

call 01945 461 177 healthysoils@hlhltd.co.uk healthysoils.co.uk

July 2019 www.farmersguide.co.uk 21

1-37 July.indd 21

23/06/2019 16:30

Arable

Variety shows consistency across three very different seasons George Renner in a crop of Elicit winter wheat.

George Renner farms 310ha in partnership with his father, Christopher, at Normanton, near Oakham and was among the first farmers to grow Group 3 winter wheat variety Elicit in autumn 2016. Three years on, with a third harvest now in sight, it’s a decision he does not regret. “As a business we select high output varieties mainly as first wheats farmed in rotation with oilseed rape, hybrid rye, vining peas and linseed. Having begun our relationship with breeder Elsoms Seeds back in the late 1990s, growing its pea varieties, we have since had further successes with

Elsoms’ oilseed rape varieties Trinity and Elgar. The recent move towards growing Elicit was another logical step forward,” says Mr Renner. Farming on predominantly shallow limestone brash soils, the Renners were quick to realise the benefits of direct drilling and this has been their key method of establishment since 2001. “We bought one of the first drills from Lincolnshire manufacturer Dale Drills and the move we made 18 years ago was one of the best agronomic decisions we have ever made,” he comments. “The benefits of direct drilling for maintaining soil structure, improved soil fertility and increased yields have been fundamental to our success. Although we have since added RTK positioning to both drill and tractor to enhance the accuracy of the GPS, it’s essentially the same drill from 2001. “Drilling Elicit last autumn between the previous year’s stubble rows at 25cm spacings, with relatively low seed rates (121kg/

ha), using a drilling system that minimises movement of the soil enables the wheat crop to establish quickly while also creating space for the crop to grow well,” he adds.

Weed control challenges Although black-grass is not a major problem Mr Renner and his team have other significant weed control challenges with both wild oats and sterile brome high on the list. “We do a lot of hand rogueing and some spot spraying as part of our zero tolerance policy on black-grass. It can be time consuming but as the farm’s agronomist I am walking the crop on a regular basis so it’s simply a case of making sure we maintain the right level of attention to detail,” he says. With orange wheat blossom midge resistance and a solid set of disease scores, including a 9 for yellow rust, a 7 for brown rust and 6.4 for septoria tritici, Mr Renner describes Elicit as a “low maintenance” variety that fits into his 3-spray fungicide programme extremely well. “I have never needed a T0 spray or a PGR with Elicit and following a T1 spray of epoxiconazole +

chlorothalonil on the 23rd of April my key spray is T2, applied in midlate May when the flag leaf, or last leaf to appear, is fully emerged. Normally I would go with Elatus Era (benzovindiflupyr + prothioconazole) at 0.8-litres/ha + 1-litre/ha of chlorothalonil. “Like most growers I understand the significance of the T2 timing, critical for both disease control and increasing yield, and so no corners are cut. The T3, normally applied in early June, is tebuconazole, applied at 1-litre/ha,” he confirms. With a few weeks to go, and despite some concerns over recent dry conditions, Mr Renner is quietly confident that his third crop of Elicit will yield well. “After three years featuring three very different growing seasons under our belt, I feel we know much more about the variety now on a practical level. Elicit has coped very well with the dry conditions – a big bonus given that our soil has excellent drainage and the lack of rain during the past 12 months – and although we are not in a high risk septoria area it’s reassuring to have the good septoria score in the locker.” ■

seeds

Sartorial Group 4 hard winter wheat

Stands and delivers NEW

EXCLUSIVE For more information call us, visit our website or contact your local Agrovista agronomist

- rapid, competitive early season development, robust resistance to diseases and high specific weight underpin yield and quality.

Call us on: 0115 939 0202

www.agrovista.co.uk

Agrovista_FW_HalfPageAd_Artwork.indd 1 1-37 July.indd 22

15/05/2019 24/06/2019 13:24 11:13

LG SPOTLIGHT WINTER WHEAT

“QUALITY, QUALITY, QUALITY” “DON’T MISS THIS” “GROUNDBREAKING”

LG SPOTLIGHT

Soft feed wheat with exceptional grain quality @LGSeedsUK www.lgseeds.co.uk/lg-spotlight

Tel: 01472 371471 www.lgseeds.co.uk enquiries@limagrain.co.uk

1-37 July.indd 23

21/06/2019 15:24

Arable

Bolstering BYDV defences Direct drilling into long stubbles has been shown to disrupt the visual clues used by aphids to identify crops, notes Will Foss.

Cereal growers will need to make the most of all the available defences against barley yellow dwarf virus (BYDV) for the coming season in the absence of seed treatment Deter, stresses an adviser. As well as having to do without Deter that many growers have relied upon to minimise early aphid-borne infections, Agrii regional technical adviser, Will Foss (right) points out that risk levels from the disease are higher than ever. Not only are the autumns becoming longer and milder, grass margins and catch and cover crops are acting as important reservoirs of infection, and the ‘silent’ BYDV carrier, maize is being grown far more widely in closed proximity to cereals for AD. “We’ve found BYDV even in late-drilled wheat crops treated with Deter this spring,” reported Mr Foss. “This isn’t surprising as we’re often seeing aphids active in January and February these days; especially in close proximity to grass margins. “BYDV is most damaging to plants affected in the early stages of growth. It affects wheat and oats as much as barley. Yield losses can be as high as 2.5t/ha. And they are made worse by weather, nutritional and other pest and disease stresses. “Unlike cabbage stem flea beetle, we have yet to see significant levels of pyrethroid resistance in the grain and bird/cherry aphids responsible for BYDV spread. However, the contact-only action of pyrethroids and their limited persistence makes spray timing and targeting crucial to success. It also puts the onus on the best possible use of non-chemical controls alongside the most careful spraying.” Reducing the migration of winged aphids into crops is the first essential in this respect. While there is little that can be done about grass margins, Mr Foss considers it vital to destroy the green bridge of stubbles or catch and cover crops well ahead of sowing. As aphids can infect by root feeding in the soil as well as above the surface, he recommends drilling at least five weeks after cultivation and

only once stubble or cover growth has died back sufficiently well from glyphosate treatment to eliminate this food source. He notes that direct drilling into long stubbles has also been shown to disrupt the visual clues used by aphids to identify crops.

Later drilling Later drilling is a key element in his strategy here to avoid the peak of winged aphid migration into autumn-drilled crops, in particular, and slow the development and spread of the second generation progeny responsible for the lion’s share of the damage due to their numbers. “A single winged aphid will typically produce 80 offspring which go on produce 80 each – or 6,400 in total,” Mr Foss explained. “What’s more, those carrying the virus prefer to feed on plants uninfected by it and those not carrying it prefer infected plants, thereby acquiring the infection. This makes for very rapid spread wherever conditions are warm enough. So it’s not surprising that sowing a week later can reduce BYDV infections by 50 per cent. “Just like modern black-grass management, I would base what and when I sow in the autumn by individual field risk level, the highest risk areas being drilled as late as possible. “While this eliminates most barleys which tend to suffer more from later-drilling than wheat, the arrival of the first two BYDV-tolerant varieties this autumn is very timely.” Only available in six-row barleys, Agrii trials show they are less affected by the virus than others, with Rafaela the stand-out choice. It has proved highly competitive against black-grass at Stow Longa, delivering yields on a par with hybrids from late-September drilling and losing none of its performance from drilling a month

later, in marked contrast to other varieties. “As seed is likely to be limited in this first season, I’d be prioritising Rafaela for high risk fields or headlands – especially where LERAPs restrict insecticide spraying,” advised Mr Foss. Alongside these cultural controls and first class micro and macro-nutrition for the healthiest possible crops, he insists the most timely pyrethroid spraying will be essential. To ensure this he recommends using the special BYDV Alert app available through Agrii agronomists and the Rhiza digital service – both for pre-season planning and in-season monitoring. Using the well-proven 170 day degree T-Sum model and local weather station records, this reliably predicts the emergence of the damaging second aphid generation from actual farm drilling and spray dates. Which means growers can time their sprays for the greatest value and the least environmental impact. At the same time, he insists the best pyrethroid actives and formulations should be used at full rates to give the greatest knock-down and leeway in persistence, together with the least effect on non-targets. Experience with other crops suggests the right adjuvant choice can improve both aphid and BYDV control, he adds. “Some growers have never had to manage BYDV without an effective seed treatment,” Will Foss concluded. “For many this will require a strategic management change – thinking ahead to what might happen and planning to deal with it through a better understanding of both the threat and controls available.” ■

Grass margins and catch and cover crops are acting as important reservoirs of BYDV infection.

24 www.farmersguide.co.uk July 2019

1-37 July.indd 24

23/06/2019 16:31

Taking on the hard feed heavyweights Sartorial is a powerful package and a match for hard feed heavyweights, says Stuart Cree.

Sartorial, a new hard feed wheat that features top yields, outstanding early vigour and good resistance against key diseases, is being launched by Agrovista for this coming autumn. Agrovista’s technical seed specialist, Stuart Cree, says: “We liked the look of Sartorial early on. It is in the same yield bracket as Kerrin, Gleam and Gravity, yielding 105 per cent of controls in breeder trials.” Early development is exceptional and the variety exhibits rapid early growth, says Stuart. “Sartorial established remarkably well in our establishment trials last autumn across the four key sites from Suffolk to the Scottish Borders.” Sartorial is ideally suited to October drilling, but can be sown from mid-September to the end of January with due regard to seed rates and spring management, he advises. “With better standing power

than Siskin and as-good disease resistance, Sartorial is very well suited to being a main first or second wheat.” Septoria resistance is a key attribute, the variety features excellent yellow rust resistance and is resistant to orange wheat blossom midge. Its good specific weight will also bring peace of mind and bodes well for its performance even in cloudy, damper years, says Stuart. “Sartorial is a pretty powerful package and looks like being a very good replacement for Santiago and a match for the current hard feed heavyweights on the Recommended List.” ■

Sartorial at a glance Lodging rating (treated) Lodging rating (untreated) Height (cms) Ripening (+/- JB Diego) Mildew Yellow rust Brown rust Septoria tritici OWBM resistance Endosperm Hagberg Specific weight (kg/hl)

7 7 85 +1 6.4 9.0 [5.3] 6.2 R Hard 191 77.3

Source: NL trials 2016-18

Candidate wheat with good yields and strong resistance A new winter wheat with high yield and quality coupled with septoria tritici, yellow rust and orange wheat blossom midge resistance is being developed by Syngenta. The potential hard feed variety has an ample drilling window, and it performs well even when late drilled, said Syngenta marketing manager for conventional varieties, Tracy Creasy (right), speaking at Cereals. “Two years of Syngenta trials have shown it to give an extra 1 per cent treated yield over one of the current top-yielding hard feed wheats on the AHDB Recommended List, in addition to a grain specific weight averaging 79.4kg/hl. “Over recent years, septoria tritici has become increasingly challenging to control and, with the impending withdrawal of chlorothalonil, this challenge is set to increase. “Varieties with good septoria

DON’T LET TAKE-ALL STEAL YOUR YIELD

tritici resistance are therefore set to become increasingly important.”

Winter barley A new winter barley with distilling potential is being evaluated by Syngenta in response to sharp increases in the amount of UK barley required for distilling. Currently, the only barleys to have approval for distilling use from the Malting Barley Committee are spring varieties, according to Ms Creasy. The new variety is nonglycosidic nitrile (non-GN), and has performed well against popular winter brewing barley SY Venture in both grain quality and yield, she said. “Having a winter barley suitable for distilling is very exciting, and we are already piloting it with maltsters and distillers.” Moreover, it brings flexibility for the trade in the event of a poor spring barley harvest, she added. ■

LATITUDE® The only take-all seed treatment

Secure your crop with Latitude® n n n n

Protects yield, quality and profits Reduces take-all in wheat and barley Enables flexibility of drilling date Improves nutrient and water uptake

www.certiseurope.co.uk USE PLANT PROTECTION PRODUCTS SAFELY. ALWAYS READ THE LABEL AND PRODUCT INFORMATION BEFORE USE. For further information with regard to the warning phrases and symbols for this product please refer to the product label. Latitude® contains silthiofam. Latitude® is a Registered Trademark of Mitsui & Co. Ltd. Certis, Suite 5, 3 Riverside, Granta Park, Great Abington, Cambridgeshire, CB21 6AD. Tel: 0845 373 0305 email:infocertisUK@certiseurope.com www.certiseurope.co.uk © 2018

July 2019 www.farmersguide.co.uk 25

1-37 July.indd 25

24/06/2019 14:58

Arable

Game-changing soil mapping service launched such as black-grass, yields and so on, to create the most accurate, consistent and detailed variable rate plans.

Simple steps

The TerraMap scanning system is mounted to the front of an ATV. Data collected and displayed on the ATV’s in-cab tablet.

A new soil nutrient scanning and mapping system, until now only available and in operation overseas, has been launched in the UK and is claimed to set a new standard for accuracy in precision agriculture. TerraMap uses gamma-ray detection technology that delivers resolutions of over 800 points/ha, providing high definition mapping of all common nutrient properties, pH, soil texture, organic matter and CEC as well as elevation and plant available water. “With such a growing level of interest in soils, the launch of TerraMap comes at the perfect timing for farmers that are looking

for that next level of accuracy in understanding their soils – which has not previously been possible,” says Hutchinsons’ precision technology manager, Oliver Wood (right). “We have been looking for a new method of mapping soils that provides more accurate and repeatable results, and can also leverage the multi-layer analysis within Omnia,” explains Mr Wood. The results from TerraMap are used to create maps within the Hutchinsons’ Omnia system which can then be overlaid with additional field information

The infield process of collecting the data is carried out in two very simple steps; scanning by driving a lightweight ATV fitted with the sensor over a field, and then taking soil samples to allow for each scan to be used to create the individual map layers. Manufactured by Canadian company SoilOptix, TerraMap’s scanning technology is based on a scaled-down version of airborne sensors that originates in mineral prospecting, and has been used in other countries successfully, and it measures naturally emitted isotopes, like caesium and potassium. “The significance of this methodology is that it is not affected by soil moisture, compaction, crop cover or cultivation state,” says Mr Wood. “This means that there are very few limitations to when TerraMap can be used – offering a much wider operating window compared to other soil scanning systems.” The consistency and reliability of the results from TerraMap are proven, he points out. “We have taken satellite imagery of fields that showed up areas of soil differences quite clearly and when we overlaid this with the texture

maps created by TerraMap they were identical. “We have also tested the results between seasons and over different cultivations, and they have remained consistent.” It was on this basis that Thurlow Estates manager, Andrew Crossley trialled TerraMap. “We had used another scanning service back in 2012 and it threw up some questionable results, which we put down to interference to the scanning from the chalky soils and changes in soil structure, but nothing was conclusive.” “When we were introduced to the TerraMap system, we felt that it would work well with our soil types so it was worth giving a go. The results have been impressive and are more accurate than previous results. “We look forward to seeing how this will integrate this autumn with our precision farming to give us more accurate variable rate plans, especially on our chalky soils.” TerraMap is available from Hutchinsons in a standard (£24/ha) or premium service (£32/ha) offer. The standard service measures 9 criteria: P, K, Mg, pH and percentage of clay, sand, silt, texture, as well as elevation. In addition to these, the premium service also measures calcium, manganese, boron, copper, molybdenum, iron, zinc, sulphur, OM, CEC and plant available water, delivering 21 layers of data for each field. Already being used in agriculture in Canada, the US, China and South America, this is the first time the scanning technology has come to Europe, and Hutchinsons has exclusive rights within the UK, the company adds. ■

26 www.farmersguide.co.uk July 2019

1-37 July.indd 26

23/06/2019 16:32

Sky high feed wheat yields!

KWS KERRIN n

Proven performance across contrasting seasons

Highest yielding late sown wheat

Strong disease resistance, including OWBM

KWS UK LTD, 56 Church Street, Thriplow, Nr Royston, Hertfordshire, SG8 7RE Tel: +44 (0) 1763 207300 / Fax: +44 (0) 1763 207310 / Email: info@kws-uk.com

www.kws-uk.com

1-37 July.indd 27

21/06/2019 15:25

Arable

Slug pellet transition easier than expected The Metaldehyde Stewardship Group’s ‘Get Pelletwise’ initiative provided best practice advice for slug control and ultimately water quality management, and lessons learned from it remain relevant even though metaldehyde is set to be withdrawn from use in a year’s time. Frontier Agriculture crop production technical lead Paul Fogg (right), believes that the initiative’s guidelines for growers

have, over the past 10 years, led to a much enhanced understanding of how and when slug control products should and can be used for maximum efficacy and cost effectiveness. Ferric phosphate in the form of Sigon, from De Sangosse, a 24.2g/kg ferric phosphate, formulated in an advanced wet process durum wheat based pellet, is

now one of the company’s products of choice and is being very well received by clients, he says. “It was obvious that with metaldehyde a lot of work had to be done in order to protect water quality,” explains Dr Fogg. “We made huge strides in identifying and evolving best practice, leading to less prophylactic ‘blanket’ applications and far more prescriptive and targeted use of product, involving more test baiting and identification of population thresholds. This in itself when coupled with the stewardship guidelines, led to a much-reduced

DSV Clearfield® varieties offer you a choice of different agronomic packages. Find full details at www.dsv-uk.co.uk

Close the Clearfield® yield gap with Phoenix CL Agronomists like the science of Clearfield® hybrid OSR varieties:

Growers love the results:

• Inbred tolerance to Clearfield® herbicides for outstanding control of the widest range of problem weeds including charlock, runch, hedge mustard and shepherd’s purse.

• Simplified rotation with no major change in agronomic practices.

• Outstanding early establishment and vigour that extends planting windows.

• Potential for input savings. • Evidence of increased yields and profitability.

Clearfield is a registered trademark of BASF. Use plant protection products safely. Always read the label and product information before use. For further information including warning phrases and symbols, refer to agricentre.basf.co.uk.

Phone 01366 388223 www.dsv-uk.co.uk

25560 SA DSV Phoenix CL Farmers Guide Mini Page.indd 1

28 www.farmersguide.co.uk July 2019

1-37 July.indd 28

use of active ingredient without necessarily compromising efficacy. “Now that metaldehyde is being removed, that time spent in adopting a new control strategy has served us well in as much as we use the ferric phosphate product in exactly the same way, achieving the same level of efficacy and persistence,” he says. “Being able to test the two products side-by-side over the past few years has also meant that trials have been relatively easy to assess.”

Mode of action Dr Fogg explains that with the differing mode of action of ferric phosphate, no tell-tale slime trail is left following ingestion and the slugs tend to retreat below ground before dying, thereby not giving such a graphic picture of mortality. However, damage reduction is still very quantifiable by the cessation of grazing and the percentage improvement in crop heath and viability. “Application is another area where we have utmost confidence in the product,” he explains. “The dimensions and ballistic properties of the 2.7mm pellet size, mean that it spreads in an identical way to the wet process metaldehyde equivalent pellet and, to be honest, as long as application guidelines are followed and conditions observed then the coverage is excellent. “The size of the pellet means that there are less baiting points than some alternative products. However, if used at 7kg/ha you are still getting 42 baiting points/ m2 and this combined with the excellent ballistics characteristics, attractiveness, palatability and persistence, results in a cost effective solution for growers. “We need to maximise margins and keep costs down for our growers wherever they are and adopting a policy of targeted slug control with ferric phosphate is the key to good crop establishment while keeping the number of passes to a minimum,” he adds. Sigon can be applied at a maximum individual dose of 7kg/ ha with a maximum total dose of 28kg/ha per crop/year across a broad range of arable crops, with best results being achieved by applying before damage occurs and upon risk assessment of the likelihood of damage to a particular crop. “It’s certainly an easier transition than it might have been,” concludes Dr Fogg. ■

05/04/2019 14:16

24/06/2019 15:41

Do you have concerns with oilseed establishment... n n n n

Loss of seed treatment Pests Lack of soil moisture Cost of certified seed

The KWS Oilseed Establishment Partnership has the solution

Supporting Successful Growth The KWS Oilseed Establishment Partnership (OEP) is an innovative scheme offering a practical solution, by sharing the risk between breeder, merchant and grower. Weâ&#x20AC;&#x2122;re in it together

The benefits: n n n n

Low risk Low upfront seed cost Cost effective seed rate flexibility Better cash flow

If you would like to sign up or find out more, simply visit our website

www.kws-uk.com

1-37 July.indd 29

21/06/2019 15:26

When others wonâ&#x20AC;&#x2122;t

NITRAM WILL Successful Yields. Secured Performance. Simple Application.

Find out how Nitram Will help your farm. www.cffertilisers.co.uk 1-37 July.indd 30

21/06/2019 15:27

Arable

Fund launched for potato storage support AHDB has launched its new Storage Network, as part of an £800,000 fund ring-fenced for sprout suppression and storage support. Potato store managers from levy-paying businesses will be able to call on the network for a site visit and one-to-one advice, delivered by independent advisers who have received training and information from AHDB experts. This new initiative comes at a time where significant changes in the way potatoes are stored are going to be needed in order to cope with the expected loss of chemical options for use on the 2020 crop, most notably chlorpropham (CIPC). AHDB Head of Crop Storage Research, Adrian Cunnington (left) said: “The Storage Network has been devised in order to allow agronomists and advisers to act as proxies for AHDB storage experts, allowing people to get one-to-one advice on best practice for their potato stores. “It’s a free consultation that will allow levy payers to get up to speed with their individual storage arrangements, to tackle the issues they will encounter following the loss of CIPC. “Store managers can call upon the expertise of a range of professionally qualified advisers, supported by our own experts, who will visit businesses to talk though the options, assess stores and provide advice on how to mitigate any impact.” A final decision on the future of CIPC is expected this summer. After two committees of member nations were unable to find a majority, the judgement will now return to the EU Commission itself, which originally advised that approval should be withdrawn. “It is a matter of ‘when’ CIPC goes, not ‘if’, unfortunately,” continued Mr Cunnington. “There have also been label changes on alternative products containing maleic hydrazide (MH), which could restrict its use. It is important for growers to consult their customers before applying MH to crops this season. “While there are some alternative suppressants in the approvals pipeline, notably ‘DMN’, there will no longer be the safety net that was offered by CIPC for storage. It will be essential to pay more attention to detail and to focus on

cost management with the new, more expensive control options. There is likely to be a period of time coming up where storing potatoes is particularly difficult. That is why we feel support from AHDB’s new Storage Network is going to be needed.” To book a free consultation, levy payers are advised to call the AHDB Storage Network booking desk on 01406 359419. Alternatively, they can call the AHDB Storage Advice line for the over-the-phone advice on 0800 02 82 111. ■ All store managers can get a free one-toone visit funded by AHDB.

WE UNDERSTAND:

BUT WE CAN HELP WITH THAT. ESTABLISHMENT RISK SHARE PROGRAMME Plant any InVigor® WOSR hybrid this autumn, and if your crop doesn’t establish by 31 October 2019, we’ll give you £30/ha* back. To find out more, visit basfrealresults.co.uk/osr/risk-share

*All claims must be submitted by 23:59 on 31.10.2019. Submissions made after this deadline will not be valid. Applications which do not provide the necessary evidence will not qualify for a reimbursement. Failed fields must be re-drilled with a spring crop to qualify for the offer. Successful seed claims will be reimbursed £30/ha. The minimum claim area is 3ha. For full terms and conditions visit https://basfrealresults.co.uk/terms-and-conditions/. InVigor is a registered Trade Mark of BASF.

July 2019 www.farmersguide.co.uk 31

1-37 July.indd 31

23/06/2019 16:45

NEW C9306. GREATER YIELD HECTARE FOR HECTARE.

RETAIL FINANCE 0+4 Annual Payments @ 0% First Payment January 2020 Business users only, terms and conditions apply. *Offer available until 31st July 2019

GREAT OFFERS ON COMBINES FOR THIS SEASON CALL 01788 891892

For more information on the C9306 and the entire Deutz-Fahr combine range visit deutz-fahr.com or call 01788 891892 *Terms and Conditions Finance for business purposes only. Promotion valid until 31st July 2019. Subject to acceptance and affordability checks. Applicant must be 18 or over. Available on new equipment only. The finance products offered under these promotions are hire purchase and finance lease. For hire purchase, first payment, full VAT and a documentation fee of £100 are all due on signing. An option-to-purchase fee of £100 (including VAT) will be collected with the final payment. The customer will own the machine when all payments have been made. For finance lease, VAT is due with each rental payment and the customer will not own the equipment at the end of the agreement. A documentation fee of £100 plus VAT will be collected with the first rental. Alternative finance options are available. Terms and Conditions apply. Annual admin fee of £40 plus VAT. The offer is subject to a maximum balance to finance of 50% (based on RRP). SDF Finance is a trading style of BNP Paribas Leasing Solutions. Finance provided by BNP Paribas Leasing Solutions Limited, Northern Cross, Basingstoke, RG21 4HL. Registered in England No. 901225. Authorised and regulated by the Financial Conduct Authority. Images are for illustrative purposes only. To find you nearest dealer visit deutz-fahr.com or call 01788 891892

is a brand of

SDF Guide 1-37Farmers July.indd 32 - Combine Advert A4_06_19.indd 1

17/06/2019 21/06/2019 12:37 15:28

12:37

Arable

Keeping couch under control It may not be the national problem it once was, but we ignore couch grasses at our peril, stresses Barrie Hunt in the next in our series of specialist articles. Even though couch is no longer the immense challenge it was before the introduction of Roundup, the latest grower research shows it continues to be problematic on 10 per cent of the UK winter cereals area. This, and the huge damage we know the five perennial species generally referred to as couch can do, makes it vital we don’t let them off the hook. All the more so because common couch, black bent, creeping bent, onion couch and creeping soft-grass are widespread in rough grassland, hedge bottoms and field margins, and can thrive in conservation headlands, buffer strips and other environmental areas. The fact that they are encouraged by reduced tillage, so easily spread by cultivations, particularly difficult to control in the spring and especially competitive in more open crops adds to the threat they continue to pose. Like the black-grass, bromes and Italian ryegrasses of this world, couch grasses are best controlled by the right combination of autumn cultivation and pre-planting glyphosate. But, as perennials which mainly spread through roots and stems rather than seed, our approach needs to be rather different to the annual grass weeds with which we are most familiar these days. Indeed, the most effective stubble control programmes for annual weeds may be the least effective for perennials, and different couch species may require different treatment strategies for the greatest success. This makes it crucial to tell them apart from annuals through careful summer identification when they are flowering above cereal canopies. Knowing which species of couch we are dealing with is important too so we can best match our treatment to its particular biology. While the plough can be useful to bury couch grasses to a depth from which they struggle to emerge, we need to be especially adept with 66199

our ploughing and use skimmers well enough to completely bury every part of them to at least 20cm. And, of course, we have to avoid bringing viable roots and stems back near the surface by repeated ploughing over the next few years. We also need to be aware that ploughing poorly or too shallow will achieve little and may make future control more difficult by distributing roots and stems throughout the soil profile. It is also unlikely to be effective at all with onion couch. In the same way, a single ill-timed cultivation can be worse than none as it chops and spreads the rhizomes, stimulating new growth and increasing plant numbers. So, if we want to control couch grasses mechanically, we almost certainly need repeated cultivations over a hot, dry summer to effectively desiccate the rhizomes. That’s why autumn glyphosate has to be our mainstay here. Providing, of course, we use it at the most appropriate time and in the best way.

spraying too will only spread damaged fragments of couch roots and shoots in the soil to emerge later and escape pre-planting spraying. It is important we use the right rates of the most active glyphosate formulations with tough perennials like couch. However, with these we can continue spraying well into the autumn even if it starts to get frosty as long as the leaves regain their turgidity and are dry. As Roundup technical manager, Barrie Hunt co-ordinates the national on-line resource (www.monsanto-ag.co.uk/grassweed-action) providing the best information and guidance for growers keen to control grass weeds in the most sustainable way possible. ■

Pre-harvest best Pre-harvest OSR or cereals applications are the best, targeting couch grasses at just the time their translocation is being re-directed downwards to store nutrients in the rhizomes ahead of winter. This gives the most effective kill of the entire root system while allowing us to set up a stale seedbed for annual grass weed control ahead of drilling with an immediate post-harvest cultivation. Otherwise, we need to leave stubbles uncultivated for 6–8 weeks so the couch can regrow enough leaf for the best glyphosate activity; something that is bound to interfere with our annual grass weed management unless we’re planning to drill either very late in the autumn or the next spring. Cultivating stubbles prior to

The fact that they are encouraged by reduced tillage, so easily spread by cultivations, particularly difficult to control in the spring and especially competitive in more open crops adds to the threat that couch grasses continue to pose.

SUPPLY INSTALLATION MAINTENANCE REPAIR

t: 01277 523696

01473 487616 m: 07803 875617

Specialists in agricultural doors Roller shutter doors Sectional overhead doors Folding shutter doors Sliding doors Steel doors e: sales@essexdoorsandshutters.co.uk Reliable professional support 24/7

www.essexdoorsandshutters.co.uk

July 2019 www.farmersguide.co.uk 33

1-37 July.indd 33

25/06/2019 15:44

You keep the country fed.

Farmers Guide

FarmAds.co.uk We keep your FarmAds FREE. www.

25/06/2019 12:24

1-37 July.indd 34

Arable

Grants help growers take the right environmental steps Severn Trent Water reports an encouraging take-up by farmers and landowners of an incentive scheme designed to further reduce the amount of metaldehyde slug control chemical ending up in watercourses. But, with just a year to run before the withdrawal of metaldehyde, STW acted recently to re-vitalise its offer by spotlighting one particular success story – at Lincomb Farms, a 300ha arable operation near Stourport, Worcestershire, part of which borders the eastern bank of the River Severn.

Sprayer wash-down Susey Bamber (right) is a local agriculture adviser with Severn Trent, covering the area around the Severn’s course through Worcestershire and Gloucestershire, helping farmers with decisions on matters such as the location and specification of sprayer wash-down areas. “We have also been promoting the ‘pesticide amnesty’ to encourage the disposal – anonymously, if so required – of unwanted chemicals at no cost to the

farmer,” she explains. “In addition, we’ve been running slug pellet calibration clinics with the aim of controlling more precisely the area of spread during application, which can also attract NRoSO points. We have also organised pesticide application training, which is fully funded, but, of course, up to a limit allocated for each catchment area. “We fully appreciate that no two farms are the same, so we have tried

to involve other interested parties – wildlife trusts, the NFU, environmental bodies, for example – to be able to offer farmers as wide a spectrum of advice as possible,” says Susey. Closing date for the last batch of financial incentives under Severn Trent’s ‘Farm-to-Tap’ scheme is 15th September 2019, with the final withdrawal of metaldehyde, which is set for 30th June next year.

A working partnership Lincomb Farms’ Andrew Symonds says his first project with STW continued over...

Match-fund The Severn Trent Environment Protection Scheme (STEPS) is the grant programme within which farmers can apply for some of the money earmarked to assist in the wind-down of metaldehyde use. According to STW’s catchment management scientist, Dr Jodie Rettino (left), 2018 was a record year for her team, with more than 4,000 farms involved. “So far, funds have been made available to help finance a range of actions on farm – cover crops, pesticide wash-down areas – some with biobeds – and filters, for example,” she reports. “We will match-fund projects up to a ceiling of £5,000 per application, but for larger-scale proposals, we will consider spreading the funding over two years. “Metaldehyde is extremely difficult and costly to remove from water, so it’s important for us – while it’s still being used – to collaborate with farmers in helping to prevent it becoming an issue at source,” she states. The scheme can also make money available to farmers for projects such as the fencing of watercourses, hard surfacing of areas around livestock drinking troughs and in gateways, lower nitrogen input for grassland, roofs for existing slurry stores and the provision of rainwater harvesting facilities. In the event of a farmer coming up with an innovative idea that’s not listed in the handbook, however, STW says consideration will be given to the proposal.

Oilseed Rape Herbicides

For more information and to visit our seasonal hub for agronomy updates please go to

www.adama.com/uk

Simply. Grow. Simply Grow Together. Together Crawler , Legion , Falcon and Sultan® are registered trademarks of the ADAMA group. Crawler® contains 600g/kg carbetamide. Legion® contains 375g/L (32.9% w/w) metazachlor and 125g/L (10.9% w/w) quinmerac. Falcon® contains 100g/L (9.7% w/w) propaquizafop. Sultan® contains 500g/L (44.3% w/w) metazachlor. Always read the label and product information before use. For further product information, including warning phrases and symbols, refer to www.adama.com/uk or call The Technical Helpline on 01635 876 622. ®

ADAMA Agricultural Solutions UK Ltd. Unit 15, Thatcham Business Village, Colthrop Way, Thatcham, Berkshire RG19 4LW. Telephone 01635 860 555. UKenquiries@adama.com.

July 2019 www.farmersguide.co.uk 35

1-37 July.indd 35

23/06/2019 16:49

Arable Andrew Lincomb explains the workings of his newly-installed biofilter system.

...from previous page

took place in 2016 and involved the installation of an RTK radio receiver unit in the farm’s Fendt 724 tractor. “We were already using an Egnos free-to-air radio signal, but I wanted to upgrade to give us 1cm accuracy for drilling cereals,” he explains. “We were also looking to improve the precision of our spraying and fertiliser spreading, so we set up an RTK base station, sharing the cost with a neighbouring farmer,” Andrew continues. “I was able to obtain a grant of £5,000 under the ‘Farmer Innovation’ option of the STEPS scheme, which covered the cost of the investment.

“This had the effect of minimising overlaps, saving us around 10t of fertiliser a year and 10,000 litres – three sprayer fill-ups – of water/ pesticide mix.” Overlaps can account for as much as 5 per cent of field area, even with good manual operation, he adds, so on an annual total spray area of 2,000ha, that can be up to 100ha of unnecessary spray use. “Obviously, this saves me money, but also reduces diffuse pollution into watercourses which is why Severn Trent offer this grant as an option.” The following year, Andrew made use of the margin option in STEPS, which paid £750/ha – up to a total of £5,000 – for establishing 6m margins along watercourses. “This coincided with the ending of our 10-year ELS agreement,” he recalls, “so Severn Trent agreed that we could use the margins we had already created under ELS, on the basis that we were no longer claiming under that scheme.” For 2018/19, Andrew took advantage of being able to roll both years into a combined payment, totalling £10,000, towards installing a biofilter and laying a concrete bunded floor and roofing over the farm

sprayer filling area. “I’d been planning to do this anyway, and the grant was the extra incentive I needed to make it happen,” he states. The location of the existing sprayfill area between two farm buildings meant that it was a relatively straightforward job to roof over. Andrew’s original intention had been to just do this and to install a biofilter under the same roof. “Initially, we discussed the project with our ST farm adviser, Susey, who recommended a visit by an ST consultant who, in turn, produced a full site report and installation recommendation, at their own expense,” he says. The proposed biofilter kit, on ST’s suggestion, would come from D&H Group, of King’s Lynn, which sent its own specialist to advise on the most appropriate product. “We then built this system from the kit we purchased,” Andrew recounts, “while the two underground water tanks were installed by the company responsible for the roof and bunded concrete floor.” Operationally, when the sprayer is filled now, any pesticide spillage – together with any sprayer wash-down liquid – runs into a bunded drain, which feeds into an underground plastic tank, which also collects

Thinking of a flail?

THINK AGAIN!

Call to book a demo!

any silt. The liquid then flows to an adjacent tank from where it’s automatically pumped to the top of a stack of four plastic boxes. The top three boxes are filled with an organic straw/soil/compost mix, through which the liquid ‘irrigates’ through perforated water pipes running horizontally across the top of each box. It eventually percolates down to the bottom box as pesticidefree water, which can then be drained out onto grass. “Having built the roof and installed the biofilter,” Andrews continues, “it seemed sensible to then add an end wall, with slatted board for ventilation while the tractor is running during sprayer fill. To complete the installation, and for added security, we added a roller shutter door.” In conclusion, Andrew feels that what could, perhaps, have been a daunting prospect was made very straightforward, with easy-to-complete forms and help from his Severn Trent adviser. “The STEPS options have provided me with a great incentive to further improve and enhance our agrienvironmental stewardship on the farm, while also reducing our input costs and boosting our production efficiency.” ■

Cyclone Mower

Heavy duty mulcher and shredder

These rotary mowers are designed for the most rugged working environments with reduced power consumption, outperforming equivalent-sized flail mowers in every way. Eight working widths from 2.00m (6’ 5”) to 6.30m (20’ 8”) Save a minimum of 25% on power consumption and fuel costs Unique blade system for maximum mulching and shredding Low maintenance machine with less wearing parts than a flail mower

Tel: 01524 850501 www.major-equipment.com 36 www.farmersguide.co.uk July 2019

1-37 July.indd 36

23/06/2019 16:51

J0053

“When farm machinery breaks, I know my dealer has the right part to ﬁx it.”

Whatever it takes to keep you going. Finding the precise part you need is not always easy. That’s why Kramp dealers offer the widest assortment of spare parts, ensuring that you will always have the solution to your problem. For more information, and to find your nearest Kramp dealer, visit our website.

kramp.com/farmer

J005365 Farmers 1-37 July.indd 37Guide Full Page RANGE ad V1.indd 1

05/09/2018 15:31 15:00 21/06/2019

DISCOVER THE COMPACT PERFORMER

THE MLT 630-105

With the choice of a Torque converter or Hydrostatic Transmission, providing 40kph travel speeds

Max. outreach

3.43m

Max. lift height Max. capacity

FULL TRACTOR HOMOLOGATION with Pick Up Hitch & Hydraulic Trailer Braking.

3,000kg

TOTAL VISIBILITY New patented roof grid, one piece high visibility screen.

LOW PROFILE Just 2.08m tall with the Compact Version.

TIME SAVING Easy Connect System (ECS)

FULL RANGE of attachments available.

MINIMUM WIDTH Just 2.06m wide on 20” wheels, with 24” radials available.

EASY STEP access step to get into the cab.

DO MORE WITH ONE MACHINE To find out more contact your local Manitou dealer www.manitou.com 9926 630 Full 38-67MLT July.indd 38page.indd 1

14/06/2019 25/06/2019 13:27 11:55

Machinery

Telehandlers

On-farm test confirms improvements The introduction of Manitou’s NewAg telescopic handlers has generated significant interest from current brand users as well as those operating other makes, and so Farmers Guide borrowed a 9m, 4t version for an extended test to see if it lives up to the hype. David Williams reports. Pre-series NewAg handlers were shown to the agricultural press late in 2016, but while samples arrived for display at agricultural events, the first machines for retail sale didn’t arrive until last year. Manitou MLT telescopic handlers enjoy a loyal following among UK farmers and a highly respected dealer network ensures high standards of after sales service for users. The NewAg 9-model line-up starts with the MLT 630-105 with 6.1m lift

height, up to 3.0t lift capacity and a 101hp engine. At the top of the range is the MLT 940-140V+ with 9m lift height, 4t lift capacity and a 136hp engine and it was this model which was supplied for the Farmers Guide on-farm test.

Suitable farm The farm chosen for the two-week test drive was Euston Estate near the Suffolk/Norfolk border. The 4,300ha

MLT 940 specification Max height Max reach Max lift capacity Cycle time lift (secs) Cycle time lower (secs) Boom extension (secs) Boom retraction (secs) Dimensions: Length (to back of fork) Wheelbase Width Height Weight (unladen) Turning radius Ground clearance Engine: Transmission:

9m 6.55m 4,000kg 7.7 6.6 14.3 9.1 5.12m 2.81m 2.39m 2.38m 8,325kg 3.92m 0.41m Deutz 136hp 500Nm torque @ 1,600rpm M-Vario Plus hydrostatic

estate includes woodland, stewardship grassland, arable crops and a vegetable enterprise run in conjunction with RG Abrey Farms. Livestock includes cattle, horses, pigs, sheep and free-range poultry and diversification in recent years includes solar and biogas plants. Materials handling is carried out by two telescopic handlers including a Manitou 735 120LSU plus another brand. Both are 7m 3.5t models and within the farm’s team of regular staff opinion is split over which is the best machine. Most suggest combining the better features of each would provide something near ideal. During the two-week test drive the main operator was Jon Bedford who is also the farm’s mechanic and his view is usually sought before new machines are purchased. “I like our Manitou,” he stressed, “but there are many areas for improvement and if we were looking at updating it now I would suggest considering alternatives. However, the latest Manitou NewAg models look much better so I have been keen to try one to find out whether these improvements make a significant difference.”

NewAg updates Resulting from three years’ development and testing, the main differences between previous and NewAg models include a completely new cab, a choice of four transmissions, engine updates including longer service intervals, and hydraulic system upgrades such as ‘Intelligent hydraulics’.

Visibility is superb, especially to the front where a single piece screen and a carefully shaped dashboard allows an unobstructed view.

One of the main improvements on the latest models is the all-new cab.

The new cab is claimed to be significantly quieter, and at only 73db the noise level is almost halved from the previous version. Improved insulation and sound-absorbing rubber cab mounts are credited with the improvement. Controls are updated but the continued over...

July 2019 www.farmersguide.co.uk 39

38-67 July.indd 39

24/06/2019 16:52

Machinery

Telehandlers Intelligent hydraulics

The cutaway cab floor above the steps makes it easy to enter and exit, and is a very useful improvement. The new top screen guard is carefully shaped to ensure it limits vision as little as possible and the main test user Jon Bedford said it made a big difference when loading at height.

The popular JSM joystick from previous models has been retained although almost all other controls are new. Most of the square button switches are swappable with others in the control panel and dashboard, allowing the user to position them to suit the task and personal preference.

...from previous page

previous and popular JSM joystick is retained, and relocated to a floating armrest which moves with the suspension seat. The control layout is new and the MLT940-140V+ Elite is fitted with Manitou’s new Vision display. The large, clear screen has simple menus and is used to monitor performance and adjust work settings. During adjustment the display switches to the relevant performance area, returning to standard operating mode when adjustments are complete. A clever feature is swappable control buttons. Using Canbus-type wiring, each switch is electronically coded and ‘recognised’ by the system so it doesn’t matter where it is attached along the harness. Each is colourcoded and clearly labelled and if the operator prefers to move a particular button elsewhere on the dashboard or control panel for convenience, it can be prised out and swapped.

Practical improvements

The Vision display on the MLT940 140+ Elite was clear and easy to use.

Visibility is greatly improved in all directions and a large sweeping single-piece windscreen gives an uninterrupted view from the ground to maximum height. For protection from falling objects a large grid covers the upper screen section and the variable rake angle of its cross bars makes it almost invisible from the driver’s seat for a clear view of the attachment when handling loads at maximum height. One of the most noticeable and practical improvements is the cab floor design which has a curved cutout above the steps. This allows users to enter and exit without catching their ankles on the floor edge, improving safety and convenience. Access is further improved by new twin grabhandles.

On delivery initial training was provided by Manitou product specialist James Hulme, including explanation of the three automatic intelligent hydraulic functions; Quicklift – which enables the operator to extend or retract and lift or lower the boom simultaneously which speeds stacking operations; Bucket shaker provides automatic shaking of the bucket to dislodge sticky materials and ‘Return to load’ allows the operator to memorise an attachment position and angle with automatic return to that position with a single touch, ideal for repetitive handling tasks. Impressive hydraulic performance includes 170-litres/min flow rate on V+ models, and regenerative hydraulics which allow boom lowering by gravity is an option. Active CRC boom suspension is an upgrade option on Classic and Premium spec machines, but standard on Elite, providing speedsensitive operation.

Revolutionary transmission The MLT 940 comes with Manitou’s top M-Vario Plus transmission standard. This offers step-less speed control from 0-40kph and uninterrupted torque across the speed range using one pump driving two radial motors. No selection of operating mode is needed as the system is fully automatic. The radial motors offer exceptional low-speed performance operating to 2,500rpm maximum whereas standard axial motors operate up to 4,000rpm. They require less oil flow resulting in fuel savings up to 5 per cent and are much quieter too, claims Manitou which developed the system with ZF.

User impression Tasks during the test period included pallet handling – mainly loading and unloading lorries; groundwork including back-filling trenches; forestry handling large tree sections and timber and heaping-up, loading and spreading digestate from the on-site

AD plant. “My first impression was very positive,” explained Jon. “It’s a good looking machine and for its lift and height capability it’s very compact with little overhang beyond the wheels to restrict operation in tight areas. This is something Manitou has always been good at – if the wheels clear an obstruction during tight turns then the rest of the machine will clear it too. “The new cab looks excellent and the floor cutout to improve access is very good. I like the idea of swapping the control button positions to suit operator preference and the situation. For many tasks just a few selector buttons are needed and being able to move these to the most convenient position on the control panel is a benefit,” he added. All controls including the Vision display appeared easy to use, he added and the ability to re-calibrate the Safe Load Indicator (SLI) from inside the cab without requiring the dealer was considered an advantage. “Main criticisms of our current Manitou include heavy steering, a rough ride and an unreliable SLI and the extended test of the latest model will help us decide whether we opt for another of the same brand when it’s due for updating,” he added.

Upgrade tyres The MLT940 demonstrator was supplied on Michelin 500/60R24 Bibload Industrial tyres whereas the farm’s own handlers have always been bought with conventional agricultural cleated tyres. After only a short time in the seat Jon said he could feel the benefit. “Ride quality on the road is very good and in muddy field conditions they grip far better than I had expected. It was also interesting that where the conventional cleated tyres of our own handler carry a lot of mud out onto the road, the Bibload tread remains clean which is an advantage.” continued over...

For loading at height the NewAg handler’s visibility was excellent.

40 www.farmersguide.co.uk July 2019

38-67 July.indd 40

24/06/2019 16:53

The UKâ&#x20AC;&#x2122;s most established supplier of precision farming products, offering best option advice, installation and ongoing support.

Your Partner In Precision Agriculture 01480 861824 | www.vantage-ag.uk

Vantage England & Wales | 4 Grovemere Court, Bicton Industrial Estate, Kimbolton, Cambs, PE28 0EY

New

sto ju s t c k in !

A full range of models including 737 & 741 machines available - please contact your local Ben Burgess representative or Rupert Greest on 07771 660 234

Visit www.benburgess.co.uk for used telehandlers & attachments - updated daily

July 2019 www.farmersguide.co.uk 41

38-67 July.indd 41

21/06/2019 15:40

Flach & Le-Roy Ltd Flach & Le-Roy Ltd is an industry leader in designing and delivering high performance drying, ventilation & storage systems for crops & woodchip. Formed in 1993 its high quality product and design services include drive-on drying floors, air ducts, walling, fans, burners and associated control equipment delivered throughout the UK and overseas. A Flach & Le-Roy 4000 ton grain store with twin side air ducts, a drive-on drying floor and 8 x 27kw axial fans

FLR-CropDrying is a brand of Flach & Le-Roy Ltd

PRODUCTS Woodchip drive on drying floor driven by a 25hp centrifugal fan supporting a 200kw boiler drying G50/G30 woodchip from 40% to 25% moisture content. Onion or potato box store ventilation and conditioning air ducts. Fans can be mounted at the side or vertically on top of the duct.

A Flach & Le-Roy 2000 ton store with a central main air duct providing two flexible loading and storage areas

Timber clad store retaining-walling. Designed to be self-shedding for level or surcharge fill. Centrifugal and axial-flow fans, from low-pressure axial for drying vegetables to high pressure centrifugal and multi-stage axial fans for drying cereals and seed crops Control panels can be supplied with a wide range of safety and functional controls all protected by modern circuit breaker technology

Confidence in our design, materials and care in manufacturing and installation is reflected in our 10-year warranty

Flach & Le-Roy Ltd â&#x20AC;&#x201C; Crop/Woodchip Drying Systems Founded in 1993 by Richard Flach and Owen Le-Roy, together the partners have over 50 years experience in the crop drying and storage business. Their speciality is high quality drive-on flooring and box-store ventilation and conditioning systems. Based on the near-ambient drying method Flach & Le-Roy's drive-on floor drying system is fully automated, having fans and burners controlled via humidity sensors in the air duct and fan house. The drying rate for cereals is up to half a percent every 24 hours and the fans deliver air through the crop at between 20 and 24 feet per minute depending on stack height. Offloading the grain trailer into the store is time and labour saving and the crop needs no stirring. More recent application of the drying-floor system is the preparation of woodchip for biomass heating systems. Our system typically supports a 200Kw boiler drying 40 tonnes of woodchip at 1.5m deep from 40% to 25% moisture content over 2 to 3 days.

Flach & Le-Roy Ltd, Tel: 01480 495956 Mob: 07774 141512 enquiries @flruk.com

38-67 July.indd 42

www.flr-cropdrying.com

21/06/2019 15:42

Machinery Grab work on the estate includes manure handling and occasional forestry tasks. A useful feature is the ability to select different oil flows for each hydraulic valve so that the grab can open slowly and close quickly, for example.

Visibility when working with pallet forks is excellent. ...from previous page

Jon commented that after just a few hours worked, he found the cab quiet and comfortable and the controls well positioned. Visibility was described as ‘excellent’, particularly down to the front attachment, and significantly better than either of the farm’s current telehandlers. “My first impression of the new cab roof guard design was that it is quite clever, but in practice the improved vision is significant. From the seat, when working at height, you look right through it without really noticing it’s there, and because it lets more light in the cab feels more spacious. There is a handy sun blind too,” he said. For yard work the view all-around was good although the top-mounted external ram for the three-stage boom restricted vision over the operator’s right shoulder. “There are two cameras which both offer a great view through the in-cab display but only one can be selected at a time. It would make far more sense to have a split view, allowing the right side and rear to be monitored simultaneously,” he explained. On the road the good visibility was also praised, although the nearside mirror view was described as ‘poor’. “What impressed me most was how much quieter it is than any other handler I’ve driven – even at transport speeds there is little engine or transmission noise. The new MLT940 is almost as comfortable as one of our premium-brand tractors so I have to give it 10/10 for roadwork,” he stressed. “It’s also very quiet in the yard although when pushing hard there is slightly more transmission noise, but never enough to be an issue. The Michelin tyres give a good ride on all surfaces although being a little larger than standard tyres means a slightly reduced steering angle, but manoeuvrability is still excellent. Even

with the larger tyres, the steering is very light.” The cab layout was described as significantly better than the farm’s current Manitou. “Everything is to hand and it’s hard to beat the JSM joystick for ease and comfort of use. The trailer hitch release has been repositioned from behind the seat where it is very awkward to get at, to the right hand side in front of the seat which is a big improvement,” he said.

Transmission Experimenting with the engine and transmission set-up proved worthwhile. “With several operating modes and set-up options, finding the best for each task took a while,” he explained. “But the system is quite user-friendly so after a couple of days it became easier to start new tasks and immediately optimise the system for performance and economy.

Access for servicing and daily checks is very good.

The NewAg handler is homologated for gross vehicle weights up to 28t when towing. The compact design means there is little overhang and if the rear wheels clear an object during manoeuvring then the handler’s rear weight will too.

“Pushing up the muck heap required a lot of power and traction as well as fast loading cycle times so I set the engine speed on the hand throttle at 1,600rpm, then controlled the travel speed using the foot pedal. That made a big difference to the operation improving productivity considerably. I also used the ‘Return to load’ hydraulic function more than I had expected. It seemed a bit of a gimmick at first simply allowing me to set the bucket at an angle and height above the ground and memorise it for immediate return to that position just by pushing the joystick fully forward. Once I was used to it I found it a big help, and because it relies on adequate oil flow to work effectively this was another situation where setting the engine revs on the hand throttle and driving on the foot pedal worked well.”

Conclusions After two weeks with the machine Jon said it had continued to impress and so he scored it at 9/10 overall. “Fuel use is minimal and I almost worried at times that the gauge was faulty as so little was used for the hours worked. Adblue consumption was negligible with no top-ups needed. “The transmission is a highlight for me. So much power available for pushing up the muckheap and for ground work, but it’s so flexible and responsive at high travel speeds too. I love it; it’s a clever design, it’s quiet and it helps users get the best from the machine. The engine has plenty of power although with one of our larger trailers on the back we could have done with a little more at times.” The cab also continued to impress, with the new control layout proving practical and optimising the space available. The large front windscreen offered excellent visibility and made the cab feel light and airy. Jon also complimented the climate control which proved more effective than the farm’s current Manitou. “The new cab remains comfortable even after long working days and in almost every area the NewAg handler is improved over our four-year-old model. “My only real criticism is the boom suspension. It’s very effective but for tasks such as unloading pallets from a flat-bed trailer the suspension disengages while additional functions such as tilt or crowd are used, bur reengages when only raising or lowering

Jon Bedford (left) with Manitou product specialist James Hulme.

allowing the boom to drop slightly while the suspension adapts to the new load weight. This can take the operator by surprise. Ease of maintenance was also improved over the farm’s own handler and daily checks are carried out in just a few minutes. Central greasing looks after almost all the lubrication with only a few grease points needing separate attention and all with easy access. “All in all the Manitou NewAg exceeded my expectations in almost every way and I think it would be very hard to beat now as a versatile farm handler,” concluded Jon.

Manager view Farm manager Matthew Hawthorne also tried the machine and was impressed. “I like our current Manitou,” he said. “But the latest version has many improvements. What impressed me immediately was how compact it is for the lift height and capacity. In the past I have never considered 9m machines because the additional boom length usually creates an overhang, making them appear cumbersome and better suited to industrial use. However, against our current 7m the new Manitou is of similar length so, with the additional reach helpful in some situations such as pushing up the manure heaps, it might be that in future we consider the larger model.” ■

The MLT940 140+ came on Michelin Bibload tyres which gave an excellent ride, gripped well and remained clean where cleated tyres would have collected mud. Ground clearance is impressive at 41cm.

July 2019 www.farmersguide.co.uk 43

38-67 July.indd 43

25/06/2019 15:47

BETTER FORAGE MORE MILK BETTER FORAGE MORE MEAT BETTER FORAGE MORE ENERGY BETTER BALES MORE BEDDING Take a closer look at why Forage Matters at www.krone-uk.com 38-67 July.indd 44

21/06/2019 15:47

Machinery

Forage demonstration

Quality and performance in grass and maize

A Scottish Borders demonstration in late May emphasised why Krone’s BiG X line-up offers just as many benefits for grass silage producers as it does for maize. David Williams was there. “Our harvesters are often the first choice for maize harvesting operations where the unique design features have earned a reputation for optimal work-rates and silage quality,” explained Krone marketing manager James Duggleby. “But our machines offer just as many benefits for grass and with standard and wide-body models and power from 490–1156hp there are versions to suit all user types. “With target milk yields of 8,000-litres per cow and a climate unsuited to year-around grazing, it’s essential that forage quality is as good as possible whether it’s from maize or grass to achieve 4,000 litres of milk each year from fed forage.” James stressed that good quality silage production is time critical as grass starts losing nutritional value as soon as it is cut, and that suitable chop length for the dry matter sugar content is an important factor. Like Krone’s OptiMaize concept for achieving optimum maize silage quality, Krone has also developed OptiGrass with the aim of efficiently producing good silage, free from contamination and prepared with consistent chop quality in whatever length is needed to suit the dry matter and use.

Line-up to suit Krone offers 8 harvester models across 2 ranges – 4 with 630mm drum widths and 4 with wider 800mm drums. The new flagship BiG X 1180, launched in autumn

2018, is the world’s most powerful production agricultural machine with up to 1,156hp available from its Liebherr 12cyl, 24.24-litre power unit and in the past 10 years from 2008–2018, Krone harvester sales have increased 250 per cent in the UK and Ireland. The company’s EasyFlow grass headers feature cam-less pick-ups and have six rows of tines in a W arrangement. Hydraulic drive allows step-less speed adjustment, either manually or automatically through Krone’s Synchro Speed mode which maintains an operating speed in relation to travel speed and ideal for variable conditions. Two front gauge wheels and one central at the rear create a triangular pattern so that, regardless of the ground angle, all three wheels always contact the ground and the header can pivot to maintain even tine clearance across the working width. “Consistent chop length starts with uniform feed,” stressed James, adding that from the standard crop roller which consolidates the swath for positive engagement by the pickup tines to the six feed rollers, Krone’s system is all about chop quality. Krone claims the lack of guide rollers and cam tracks means 58 per cent fewer moving parts than conventional headers, making it smoother running with lower wear rates and reduced operating costs. The cam-less pick-up maintains a constant tine travel speed and the

Grass had been cut by the farm’s own BiG M 450, powered by a Liebherr 449hp engine and with a 9.9m cutting width.

 The demonstration included a wide-body, entry-model BiG X 680 and a standard body BiG X 580.

W tine pattern ensures a constant flow of grass for transfer to the intake by the large 600mm diameter cross auger. Because Krone harvesters use independent wheel motors rather than a solid front axle, there is space between the front wheels for a larger intake chamber. Six compression rollers ensure forage is gripped securely, whatever its length, and fed evenly to the drum. As well as providing smooth and

positive transfer of crop, the long feed chamber provides added protection from foreign objects. An 820mm travel distance between the leading roller which contains the metal detector to the counterblade provides ample time for drum rotation to stop before objects continued over...

July 2019 www.farmersguide.co.uk 45

38-67 July.indd 45

23/06/2019 17:24

Machinery

Krone UK marketing manager James Duggleby with the EasyFlow grass header. “Consistent chop starts with uniform feed and from the standard crop press roller to the six-roller intake, Krone harvesters optimise throughput and quality,” he explained. ...from previous page

enter the blades. There is also protection from non-ferrous objects through RockProtect which uses an accelerometer to detect if the pre-compression rollers are forced suddenly apart by a foreign object. Sensitivity can be set by the operator. When blockages are detected and the intake is reversed the crossauger and crop press roller both lift automatically providing easy access to clear any obstruction. When work resumes, both return automatically to their working positions.

High capacity, reliable chop Suitably chopped grass is critical to clamp construction and chop length must be adequate to maintain structure but achieve optimum consolidation for anaerobic fermentation. For grass with less than 20 per cent dry matter 20–30mm is suitable, but for forage

Forage demonstration with more than 20 per cent dry matter 10–20mm chop length is more suitable. Drum options for grass include the MaxFlow, with 20, 28 or 36 blades and which can also be operated with half the blades removed extending the range of chop lengths available and for increased compatibility with a mix of crops from maize cut shorter for anaerobic digesters to grass. Blades in an 11-degree chevron pattern make full use of the 630 or 800mm drum widths for smooth chopping performance and crop flow. The drums of both standard and wide-bodied models are 660mm diameter. One of the main design features is that the knives are attached to the underside of the holders rather than on top; providing twice the space to transport chopped material of standard knife mounting arrangements for higher throughput. Krone says the under-mounted design also reduces noise levels and drum wear, since all forage contact is with the knife body. Adjustment of shear bar to knife clearance is automatic and set from the cab. A single ‘knock sensor’ is capable of detecting knife to bar contact across the width, providing information to two adjustment motors. Manual adjustment remains available. To optimise potential work-rates, the drum base and accelerator back-plate are both spring-mounted to cope with uneven crop flow and allow clumps to pass through without blocking. The drum base is linked to the shear bar so that as wear occurs and the shear bar is adjusted, the preset drum clearance is maintained through the season.

Efficient power With fuel costs increasing, many of Krone’s harvester engines feature dual power curves allowing the

The EasyFlow header is available in 3.0 and 3.8m pick-up widths. The reel is cam-less for smooth delivery of forage to the intake and the tines are in a W-arrangement helping maintain constant feed rate. A triangular wheel arrangement ensures accurate ground contour following allowing the header to operate closer to the ground with reduced risk of forage contamination.

The header is removed and attached quickly and easily. The six-roller intake ensures positive and constant feed to the drum with a long 820mm distance from the metal detector to the knives to reduce the risk of foreign object damage. RockProtect is also fitted, monitoring roller movement to detect large solid objects entering.

operator to save fuel where conditions allow. In Eco-Power mode the BiG X 680, for example, produces 500hp, but in X Power mode output is up to 662hp. Automatic selection adjusts output to match demand, but manual control is also available. “The most efficient operating conditions are always with as large a swath as possible in front of the machine, and travel speed adjusted to make the most of chopping capacity,” pointed out James. “VariStream contributes to efficiency by allowing operators to push harvesters nearer their limits, knowing that if lumps in the swath temporarily exceed capacity the overload protection will operate preventing blocking.” All BiG X harvesters are available with or without 4wd, but James explained that for the UK 4wd is considered standard. Independent rear wheel suspension allows the engine to be mounted lower in the chassis than if a common bar axle arrangement was used, and a further benefit is the 55-degree steering angle saving time on headlands.

Additive dosing Krone harvesters offer flexible additive dosing options including integrated coarse dosing from 0.5–7.5-litres/ min, and fine dosing from 0.03-litres/ min–0.25-litres/min and optional dose control automatically adjusts the rate to suit the yield. The on-board multitank system allows the user to allocate tanks for additional fuel storage, or increased additive capacity up to 505 litres. Crop throw is adjustable from the cab, allowing fuel savings and reduced risk of crop spillage by reducing the throw distance when appropriate. To achieve this the back plate of the accelerator moves away from the impeller reducing crop contact with the paddles. For longer distances such as when opening up, to a trailer behind a tractor at the rear, the back-plate is moved closer so that forage is propelled with the full force of the impeller. EasyLoad automatic trailer loading is an option using spout-mounted cameras to load trailers alongside and the operator can tailor the system for various loading strategies such as trailer front or rear first for maximum continued over...

Access to the knives is very good. The versatile MaxFlow drum uses an undermounted knife arrangement which provides up to twice the space for forage to be carried compared to conventional knife-mount systems.

Swapping between maize and grass harvesting is simple with convenient fitting or removal of the maize processor. Access for maintenance is excellent.

46 www.farmersguide.co.uk July 2019

38-67 July.indd 46

23/06/2019 17:26

P R O M O T I O N Valid Until 30th September 2019

2019

www.sealey.co.uk

MIG WELDERS

battery chargers

Request your copy or view online at www.sealey.co.uk 38-67 July.indd 47

CompressorS

POWER TOOLS

FANS 21/06/2019 15:48

Machinery

Forage demonstration ...from previous page

traction or improved visibility. Automatic filling at the rear isn’t currently available but will be added later. Cabs are available in Premium or Premium Comfort specification which includes an uprated seat, and LiftCab is an option allowing the operator to raise the cab by 70cm to improve vision for work in taller crops such as maize. The demonstration proved the ease of operation including quick adjustment and set-up through the control screen. Telematics to provide remote performance monitoring will be available later. Latest wide-body 680, 780, 880 and 1180 models all feature a new cab with improved visibility. A raised roofline above the side windows is the most obvious difference, improving the view of trailers alongside.

Growing sales Approximately 320 Krone BiG X harvesters are manufactured per year to compete for a share of the

Krone harvesters are well known for their capability in maize, but the same design features which achieve accurate maize chopping length provide the same benefits in grass, stresses the company. Its short-term target is to achieve 20 per cent total market penetration.

3,000-unit world market. Biggest demand is from Germany and the USA and Krone’s target is to achieve 20 per cent market share. In the UK, the split between Krone’s wide- and narrow-bodied models is approximately 60/40 in favour of the larger machines. “OptiGrass is our strategy for achieving good quality silage,”

summarised James. “From the EasyFlow headers to the MaxFlow drums fed evenly by the six-roller intake, and VariStream allowing the operator to maximise work rates, the BiG X harvesters are designed to precisely chop forage to the required length quickly and efficiently, preserving quality for the best start possible to the clamp.” ■

Krone’s BiG X line-up Model BiG X Engine Power (hp) Eco-Power (hp)

480

530

MTU 6-cyl,12.8-litre

580

630

MTU 6-cyl,15.6-litre

680

780

880

Liebherr V8 16.16-litre

1180 Liebherr V-12 24.24-litre

490

530

585

626

687

775

898

1156

–

460

550

545

624

700

MaxFlow drum– knives/(length of cut) MaxFlow drum width/diameter BvL half page.qxp_Layout 1 02/05/2019 14:39 Page 1

20 / (5–31) 28 / (4–22) 36 / (3–17) 630/660mm

800/660mm

Quality mixer ... Quality mix ... Quality assured

BvL - German engineering at its best. Capacities from 5m3 up to 46m3 with a wide range of specifications and options, including unique options to suit all your livestock TMR needs.

North: Paul McUrich - 07810 040100 / paulmcurich@gmail.com South: John Molton - 07947 719985 / john.molton@bvl-group.de www.bvl-group.de 38-67 July.indd 48

40 years of Vmix development 23/06/2019 17:26

Rural Advice

Working smarter with gross margin mapping Carter Jonas partner Mark Russell focuses on technology in this month’s Rural Advice column, while pointing out that a change in mindset is required where yield and profit per hectare is concerned. So, Brexit – what happened there!? What has happened is that, in the absence of the politicians making up their minds, the world has decided to get on with life. While, overall, for 2019, the amount of land having been marketed is 46 per cent down on last year it feels like the brakes have been taken off since the beginning of April. Our latest Rural View is full of the potential for robots being the future of farming. There is undoubtedly a place for this technology, but we also have to be careful to encourage and curate the best talent into the industry. Perhaps, though, we will see more diversity in the workforce – we need the IT skills to drive these ‘bots, as well as the practical skills of settling the herd or flock at the close of the day. Having mentioned technology, many clients have embraced variable rate drilling and sprays. We have now taken this to the next stage with yield mapping turned into gross margin mapping, linked to a system which integrates with your on farm information systems. Our director of Agribusiness, Jon Birchall believes this is the next stage of working smarter and will provide a more efficient way

to identify where income issues lie. The tool enables farmers to understand which bits of their field are performing in a financial as well as a yield sense and identifies areas that are under performing, over performing or average. Jon says: “I want to bring the best of technology to our farms so we can help, through improved farming practices, to replace some of the lost income when BPS disappears. There are a huge number of things we can start to look at.”

Margin per hectare Using the resources available through Carter Jonas’ GIS department, the team has been able to marry together historic yield maps and production costs in a single platform to create a net margin per hectare map. Putting a monetary value on every action is where Jon wants to get to; “Everyone is used to seeing nice fields with a single crop in them. I’m proposing that, in the future, a field could have a 16m stewardship margin adjacent to the hedge, with a 3m sacrificial strip adjacent to that for machinery to turn on, minimising the area exposed to compaction. Other stewardship options would be located on the regions of the

field which have consistently under performed, and can’t be improved. Yield per hectare is irrelevant, it’s profit per hectare that counts. I know that represents a change of mind-set, but I truly believe that’s what is required.” Jon is building a team of agribusiness experts across the country, with the need to assist farmers over the next five years to replace the likely hole in their accounts when subsidy is withdrawn. Locally, in Cambridge we are focusing on diversification projects and are really pleased to have this new tool in our armoury to help clients understand in more detail how each part of their holding impacts on their bottom line. Looking forward to ELMS, it should also allow us to calculate where, within a field, options under the scheme would generate more income per hectare than the crop-based alternatives. On the professional front, we are seeing an increase in the use of Planning in Principle Applications (PiPs). These are a useful way of starting the planning process without spending a huge amount of money on upfront designs and surveys. Where successful, they can increase the confidence for you or a developer to take a project forward to a full planning application. Mark Russell Partner, Carter Jonas Cambridge 01223 346628 Mark.Russell@carterjonas.co.uk ■

SHEEP WE DON’T EMPLOY THEM Whoever coined the phrase ‘wisdom of crowds’ was guilty of some woolly thinking. True wisdom comes from standing apart and challenging the norms. Which is why you’ll never find our team of extraordinary people merely following everyone else. carterjonas.co.uk/rural-consultants

Mark Russell 07967 555737 mark.russell@carterjonas.co.uk

38-67 July.indd 49

23/06/2019 17:28

TO R GG U ON E G G R H ER ER ST

Contact Chris Chilvers on 07796 759332 MANNS Saxham Tel: 01284 777700 claas-manns.co.uk stewart-trailers.co.uk

+44 (0) 1467 681418 sales@stewart-trailers.co.uk

MANNS

www.stewart-trailers.co.uk

66443

CONSTRUCTION SERVICES

Grain Storage Handling and Milling Systems

01692 535444 01379 671172

email: andrew@mconstructionservices.co.uk

LOWER OAKLEY, DISS, NORFOLK IP21 4AQ Buildings designed and built to EN1090

• Manufacture of agricultural and commercial steel framed buildings • All buildings designed in-house using Tekla 3-D design software to CE Standard EN1090 with certificate on completion • Buildings erected including groundworks, by our own employed staff • Design and installation of all grain handling and drying equipment • Planning service provided

www.mconstructionservices.co.uk 50 www.farmersguide.co.uk July 2019

38-67 July.indd 50

21/06/2019 15:49

News

Trailer hire business Pictured with the new trailer (l-r) Sally, Archie and Mark Cansdale with Manns field sales manager Mike Chinnery.

A new agricultural trailer hire business was launched at the Suffolk Show with the handover of a new Stewart 18-23S 18t trailer by main dealer Manns to 14-year old Archie Cansdale. “I aim to establish a successful agricultural hire business before I leave school,” he explained. “I considered hiring mini-diggers but with increased diversity of crops being grown, demand for versatile, well-made trailers is increasing and this Stewart trailer is already booked for the maize harvest by a local contractor and I have a potential hire for wholecrop harvesting too. I offer minimum six-week hire and anticipate most demand will be within East Anglia but am open to considering hire further afield depending on the period and use. “I believe the Stewart trailer will hold its value well and hope to build up a fleet over the next few years,” he added. Archie said that as well as a strong reputation for excellent build quality the Stewart trailer also appealed for the back-up from supplying dealer Manns. Archie’s parents Mark and Sally Cansdale farm 280ha of rented

Archie Cansdale with the first of his hire trailers.

land near Bury St Edmunds, Suffolk on which a flock of 650 ewes is grazed with the grass also used for hay, most of which is sold for equine use to Newmarket. Claas machinery operated includes a tractor, Scorpion loader and Quadrant baler all bought through the dealer. Further family links with the dealer include both of Archie’s grandfathers – one of who is a farmer and uses Claas combines and the other; Roy Cansdale who was instrumental in setting up and running Combine World. “Archie Cansdale Agricultural Trailer Hire is a business which I can run while still in education and most of my promotion so far has been through social media and has generated considerable interest,” added Archie. ■

BIGGER STRONGER TOUGHER

Price is what you pay. Value is what you get. Contact Chris Chilvers on 07796 759332

MANNS Saxham Tel: 01284 777700

claas-manns.co.uk

stewart-trailers.co.uk

MANNS 38-67 July.indd 51

23/06/2019 17:29

News

Dealer recruitment campaign success in Suffolk With one of the latest McCormick tractors at the Suffolk Show in late May are (l-r) Suffolk Agri-Centre director Ken Grimwood, McCormick sales director for UK and Ireland Ben Agar and Suffolk AgriCentre sales director David Eley.

A dealer recruitment campaign launched at Lamma 2019 is bearing fruit with the return of Suffolk AgriCentre to the McCormick dealer network. The dealership based at Pakenham, east of Bury St Edmunds supplied McCormick products from 2007 to 2013 when it felt the range

at the time lacked some of the models and features wanted by local customers. “But that has changed completely,” said Suffolk AgriCentre sales director David Eley. “The McCormick line-up now has something for everyone – from the smallest compacts through

no-nonsense livestock and smaller arable tractors to the highperformance X7 and X8 machines with CVT transmissions and all the precision farming technologies people want,” he added. “It’s a range that really suits our customer base and with new investment in an expanded management and support team for McCormick in the UK, I’m confident the product is also matched by the back-up we need and our customers expect.” McCormick sales director, Ben Agar is spearheading the Argo Tractors dealer recruitment drive and is delighted that Suffolk Agri-Centre has returned to the McCormick fold. “Our campaign emphasises that as other major brands aim to tie down dealers to exclusively sell their implements as well as tractors,

dealerships selling McCormick are free to supply whichever equipment brands best suit them and their customers. “Argo is a tractor specialist, it’s our core business and the one that’s the focus of substantial investments in product development, manufacturing processes and assembly,” he explained. “We’ve also put considerable investment into new digital resources for parts, sales, marketing and communications that will help our dealers grow with McCormick.” David Eley agrees that dealer independence is a welcome factor: “We’ve done very well with Amazone for many years now and we’re also doing well with Krone, which we took on more recently, as well as with Teagle, McConnel and our other long-standing equipment franchises. “With the addition of McCormick tractors, I believe we have a very rounded range of products to meet the needs of farmers and contractors throughout Suffolk, and the resources to support them in terms of parts and service back-up.” ■

SBS Spares Ltd 66234

SPECIALISTS IN USED SPARES

Valley Farm Pit, Hadleigh Road, Sproughton, Ipswich, Suffolk IP8 3EN Commercial Vehicle Dealers and Dismantlers

www.suffagri.co.uk

Used commercial from vans to tractor units. Always a large stock of 7.5 ton Tippers, Flats, Boxes etc. Box bodies for storage from 10ft to 40ft also containers, Artic Trailers, Flats, Step Frame Boxes and Fridges. Axle wheels, tyres, springs, rams, power packs, engines etc. Artic back end 5th wheel bogies and tipping bodies. Artic tankers, fuel bowsers, low loaders, compressors. Please phone with your requirements and we’ll try to help.

Tel: 01473 652454

Fax: 01473 652467

Email: sbssparesltd@btconnect.com www.sbssparesltd.co.uk REDUNDANT LORRIES & MACHINERY ALWAYS WANTED

P. BOWERS Construction

Phone David Eley 07768 007528 Pakenham, Bury St Edmunds, Suffolk IP31 2JS

01359 232155 • Email: office@suffagri.co.uk

For all your building needs... From livestock, grain stores, straw sheds and workshops (industrial and agricultural) All groundworks undertaken, from drainage to concreting! Lagoons and water holding/sewage treatment plants, etc, also carried out

Please call for a chat – we are happy to help where we can

66361

66436

k Dealers We are now McCormic k a demo now Tractors in stock – Boo

07944 272 762 • peterbowers6@gmail.com

52 www.farmersguide.co.uk July 2019

38-67 July.indd 52

23/06/2019 17:31

McCormick is a trademark of Argo Tractors S.p.A.

38-67 July.indd 53

25/06/2019 12:04

On your

marks, get set, click Buy parts direct online from Perkins with next day delivery Shop now www.perkins.com/shop

n e p o UK w o n ss the d acro d Irelan an

Perkins Aftermarket, engineered for life

38-67 July.indd 54

21/06/2019 15:49

Machinery

New UK headquarters to optimise customer experience Almost 600 customers and dealers attended the official opening of Amazone UK’s brand new Orchard Farm, Auckley, Doncaster headquarters and the event also provided an ideal opportunity to show-off the company’s latest agricultural innovations. David Williams was there. Orchard Farm was first opened to the public for Amazone’s Amatechnical event in 2016 making use of the land and limited buildings previously on-site. The new headquarters in 8ha of open fields replaces the previous Harworth location nearby, and has been designed to meet the company’s administrative and practical needs, but primarily to improve the experience of dealers and customers. Purpose-designed buildings provide storage for parts and machinery and there are offices, training and meeting rooms and a large showroom. External facilities include fields for demonstrating products, trial plots for testing new technology and a sprayer test-track will be added later. Since the family-owned German manufacturer opened its UK subsidiary in 1982, a strong partnership between Amazone and British farmers has developed explained group managing director engineering, Justus Dreyer at the event. Products have become more technical and the priority is to ensure customers can achieve best results with full back-up from the company in terms of training, support and aftersales service, he explained. Group managing director commercial, Christian Dreyer

confirmed that investment in Orchard Farm is intended to enable the performance of Amazone machines to be demonstrated, to train and educate and to encourage increased dialogue with dealers and customers which in turn will contribute towards further sales growth, better ideas and leading technology for the future. Amazone UK managing director Simon Brown commented that approximately £4m investment has been made in the site and that the new facilities have been occupied since mid February this year. “The previous location was a distribution centre. We had trial plots with a few work areas but what we needed were suitable facilities for training, education and research. Parts storage was lacking and the new building allows 50 per cent more parts stock to be held in the UK which is equivalent to a year’s supply.” Asked why the decision was taken to invest now, with all the current uncertainty caused by Brexit and agricultural reform, Justus explained that because Amazone is family owned, the only shareholders are Dreyer family members who are keen to invest for the long term. “We had no hesitation in committing as we have continued over...

Working demonstrations of the latest products attracted considerable interest.

Cutting the ribbon for the official opening of Orchard Farm (l-r) Justus Dreyer; Christian Dreyer; Bettina Dreyer; Simon Brown and Amazone group sales director Andreas Hemeyer.

July 2019 www.farmersguide.co.uk 55

38-67 July.indd 55

23/06/2019 17:32

Machinery

The Cayros XMS plough in action watched by visitors. ...from previous page

full confidence in the UK’s farmers and agricultural industry, and an excellent UK team led by managing director Simon Brown,” he added.

Greater drilling flexibility New and updated products displayed included the Cirrus drill which is now available with a Double-Shoot seeding combination. This includes a second metering system, distribution head and coulters designed for either sowing a second seed type or applying fertiliser into the seedbed without risking direct seed contact and scorch. “Fertiliser with drilling is back with a vengeance,” explained Simon Brown. “Placing the fertiliser where the plant can make best use of it makes sense.” The Double-Shoot system is available for 4 and 6m trailed Cirrus drills. The 4,000-litre hopper is pressurised and split 60/40 in 2 compartments with independent metering allowing the operator to

calibrate 2 different materials at different application rates. Electric calibration is carried out at ground level remotely using the TwinTerminal 3.0 which avoids the need to return to the cab during set up. The application rate can be varied to suit a twin-rate prescription map for part-area, site-specific seeding via GPS, and having set the rate the operator can opt for both materials delivered through the TwinTeC+ or RoTeC pro coulters at the rear or one material at the rear coulters and the second to the FerTeC coulters in front of the tyre roller. This allows materials to be placed at different depths to suit the crop type, seed size and moisture requirement. Further flexibility includes the ability to set distribution so that two materials are placed in the same seed row – such as when using starter fertiliser for cereals, or to set a mix with some fertiliser in the seed row and the remainder between the rows for uptake later.

 The CombiDisc 3000 is available now in a 3m working width for use with Cataya gravity-fed or Centaya pneumatic mounted drills for faster and cheaper drilling when conditions allow. The CombiDisc 3000 has 24 serrated discs for seedbed preparation between 3–8cm depth.

Coulter pressure is adjusted hydraulically giving the option of automatic control to suit variable soil types according to soil texture maps – increasing pressure on heavier soils and reducing it for lighter areas to maintain even drilling depth. Automatic adjustment of coulter pressure while also adjusting the seed rate to match the conditions will optimise seed germination and establishment,” explained Simon. Options for the Cirrus 03-2CC drills include a front Crushboard ahead of the discs, S-Pack fullwidth tyre packers, seed blockage monitoring and the AmaTron 4 terminal for control. Amazone also offers its GreenDrill 500D to provide independent metering of a third material such as cover crop seeds, micro-fertiliser or slug pellets.

Faster and cheaper drilling

 The new Cirrus 03-2CC Double-Shoot seeding combination provides new flexibility for those planting multiple seed types or placing fertiliser during drilling. The Double-Shoot system allows fertiliser application to be split with some placed in the seed row for availability immediately after germination and the remainder between the seed rows for later availability.

A new option for Centaya and Cataya Combination Drills allows mounting on Amazone’s new 3m CombiDisc 3000 disc cultivator offering higher work rates up to 15kph, and reduced fuel use than used with a traditional power harrow. “Customers can choose between power harrow or disc cultivator mounting or have both available and swap the drill over from one to the other to suit the season and conditions,” pointed out Simon. “The short disc cultivator with the mounted drill uses less fuel, offers faster operation and requires less power.” The CombiDisc has 24 serrated, 410mm discs and is ideal for seedbed preparation at depths from 3–8cm. The relatively small discs have a  The 4,000-litre hopper is split 60/40 with each section having separate metering. Using soil maps the seed rate can be adjusted automatically to suit variable soil types with coulter pressures set higher or lower to maintain constant seeding depth.

high peripheral speed and achieve effective soil crumbling. Sprung rubber mounts allow disc movement to follow the soil profile. Removing or fitting the drill through the QuickLink linkage system takes little time and requires no tools, making it practical to also use the CombiDisc as a traditional disc cultivator for solo operation. The CombiDisc with standard mechanical depth adjustment costs £7,750, saving approximately £2,500 compared to the cost of a power harrow. Hydraulic depth adjustment is an option.

Double the benefit Spreader updates include increased features for front-mounted spreaders to match those available for rearmounted machines. Using Isobus control; left and right adjustments are automatically switched to suit and Simon Brown suggested advantages would be available for those applying two products at different rates in one pass or wanting to increase travel speeds while applying at high rates and wider spread widths. Control of both spreaders is possible through a single display. Other spreader updates include FlowCheck to monitor shutter output on ZA-TS mounted models. The system constantly monitors each disc aperture for blockages and will also detect if the spreader is running empty. FlowCheck uses pressure sensors on each disc drive circuit to detect irregularities and if a problem is suspected the aperture is momentarily opened and closed again to try to clear the blockage. Simon said ArgusTwin pattern monitoring is proving popular with 10 per cent of spreaders ordered now with the system. “ArgusTwin detects problems and checks the continued over...

56 www.farmersguide.co.uk July 2019

38-67 July.indd 56

23/06/2019 17:34

COVENBROOK

Sales Direct

Approved

WE OFFER A WIDE RANGE OF QUALITY BUILT PRODUCTS DELIVERED NATIONWIDE DIRECT TO OUR CUSTOMERS We also undertake all agricultural engineering, fabricating, machining and welding, including reconditioning and modifications to existing machinery, blasting and paintshop facilities. For further information please ring John on 07860 417643

HD Access Platforms from stock

Rigid Bag Lifters from stock

Heavy Duty Flat 8

HD Muck Grabs

HD Bale Spikes – available in all sizes

HD Multi Bale Stackers

e: covenbrookfabrications@gmail.com • www.covenbrookfabrications.co.uk Mole Drainers (low horse power requirement)

Grain Pushers – available in all lengths

John on 07860 417643

66124

Covenbrook Hall Farm, Stisted, Braintree, Essex CM77 8AJ

July 2019 www.farmersguide.co.uk 57

38-67 July.indd 57

21/06/2019 15:53

ADR UK | TYREMART Agricultural Running Gear Specialists Professional and knowledgeable staff committed to excellent customer service. Vast stock of all types of running gear to suit many applications. 3URYHQ DQG WHVWHG high quality products. &RPSUHKHQVLYH VWRFN RI JHQXLQH $'5 spares with next day delivery on most items. 7HFKQLFDO VXSSRUW IURP the world leader LQ WKH manufacture of agricultural running gear.

www.tyremartagri.co.uk

$[OHV 6WXE D[OHV 6WHHULQJ D[OHV 7DQGHP DQd WULGHP %RJLHV +\GUDXOLF SQHXPDWLF VXVSHQVLRQV :KHHOV DQG W\UHV 6SDUH SDUWV DQG DFFHVVRULHV

ADR UK - TYREMART AGRICULTURAL LTD

Main Road, Long Bennington, Newark, Notts, NG235DJ GREAT BRITAIN Tel. +44 1400 283820 - Fax +44 1400 283137 email : info@tyremartagri.co.uk | www.tyremartagri.co.uk

Est 1992

Suppliers and Installers to:

Agricultural, Industrial and Domestic

Specialist Plastic Tank Distributor

Lowlander ® Manure Spreaders 3 Year Warranty | Details available upon request

Twin Vertical Auger

Our range includes: bunded tanks, oil tanks, Ad Blu tanks, petrol interceptors, sewage treatment plants, septic tanks above ground and underground tanks for storage of oil, chemical, water etc Please phone for a FREE Product Pack & friendly advice We also provide Accessories & other products

TVA | 6 – 40 tonnes

Horizontal Beater & Spinning Disc HBD | 10.5 – 40 tonnes

ROOF? TER OFF YOUR GRAIN STORE ARE YOU UTILISING THE WA NDS OF LITRES OF FREE SOFT YOU CAN COLLECT THOUSA AL CAPITAL OUTLAY! IM SPRAYER WATER FOR MIN

Tel: + 44 (0) 1362 860352

www.gtbunning.co.uk

E-mail hgtanks@outlook.com Website: www.hgtanks.co.uk Contact Chris Glass

Tel/Fax 01359 270736 Mobile 07860 352739

The Street, Hessett, Bury St Edmunds, Suffolk IP30 9AZ

bunning spreaders 62071

58 www.farmersguide.co.uk July 2019

38-67 July.indd 58

21/06/2019 15:54

Machinery

Identical operating features for front- and rear-mounted spreaders are now available through Isobus control allowing application of two different products in one pass or allowing faster application at high rates to wide spread widths. ...from previous page

pattern is maintained evenly on slopes,” explained Simon. “Through ArgusTwin the drop-point is altered to maintain the spread pattern and WindControl can also be added to adjust the disc speeds to maintain even spread when wind could affect the distribution.

Improved boom stability Sprayer news included new Pantera 4503 self-propelled models starting to arrive with several already delivered to farms. The latest Pantera is available with new ContourControl boom control with active SwingStop pendulum limitation for booms up to 40m. ■

One of the very first sprayers with vertical folding hydraulic folding booms was displayed. Amazone’s H boom was manufactured between 1988 and 1999 in widths up to 21m for the UF range of sprayers. Complex, but reliable, cables transmitted the folding force.

 Pictured are the team from Amazone dealer Oliver Landpower at the event. (l-r) sales director Adrian Hewis; field sales representative based at Luton, Michael Payne; and field sales representative based at Tingewick, Joe Frankland. “Amazone’s investment represents a very positive commitment to the UK,” commented Adrian. “The improved facilities including additional space for machinery and parts as well as for inhouse training of dealers and operators will be a big advantage. “Amazone machinery has an excellent reputation for build quality and performance and is regarded by customers and dealers as the most technologically advanced in its field.”  Amazone UK managing director, Simon Brown.

Farm Business, Fleet & Agri Motor Trade Insurance Specialists

Committed to Service and Price

Connect with us...

@GreenlandsIns Visit

Greenlands Insurance Services Ltd work to provide a friendly and complete brokering facility for agricultural insurance risks. This approach complements a broad range of associated products and services, each of which is tailored to meet the ever-shifting needs of our clients both existing and new.

Greenlands.co.uk

Authorised and regulated by the Financial Conduct Authority

July 2019 www.farmersguide.co.uk 59

38-67 July.indd 59

23/06/2019 17:35

Machinery

Farm Sale

Machinery lots make strong money at Cambs dispersal sale

An on-farm sale of mostly modern farm machinery in early May by auctioneers Brown & Co was well attended and generated some excellent prices for the vendors. David Williams reports. The sale at Highfield Farm, Perry, near Huntingdon was on behalf of M Ellerbeck & Co and due to a change in farming policy as the vendor was retiring from large-scale farming. With the exception of a small area of land which was retained by the vendor, the rest had been sold by Brown & Co prior to the machinery dispersal sale. “The vendor was an existing client of our company and we were especially pleased that many of the prices achieved were well above expectations,” explained auctioneer George Watchorn who is based at the agent’s Melton Mowbray office. “In excess of 200 people attended including a large number of farmers from the local area and trade buyers too – many from the north and

north-west. Although there were some excellent lots on offer direct from the farm we also sold quite a number of included lots and some of these were also particularly attractive.” George said notable results included a 2012 John Deere 6630, bought by a North Yorkshire dealer for £40,000 and a Claas rubbertracked crawler new in 2000 which went for £24,000 to a dealer in Lincolnshire. “The combine sold well too, and overall the result proves that after an exceptional 12 months the market remains strong for good quality used machinery. We have many more sales coming up through the year and expect these to be equally successful,” he added.

Highest price achieved at the sale was for this John Deere C670i combine harvester. AutoTrac-ready it also had a straw chopper with electric adjustment of chopper vanes and swath deflectors. It was on 800/65R32 drive tyres, and 480/80R26 rear tyres and was sold with its John Deere 625R header and a Marston header trailer. The 2011 model combine was registered on a 12-plate and had recorded 811 engine hours and 609 drum hours and was in excellent order. It sold for £80,000. (inset) Auctioneer Michael Alexander sells the John Deere combine.

P C

C e

Under the Cat Challenger body panels this was actually a 2000-model Claas 75E crawler. Equipped with a full weight pack, rear linkage and PTO it was on Camoplast 27in tracks. It was registered on a W-plate and had recorded 9,026 hours. A Lincolnshire dealer placed the winning bid at £24,000.

This tidy John Deere 3050 4wd with an SG2 cab and front linkage was on 16.9R38 rear and 12.4R28 front wheels and tyres. On a 1992 K-plate it had recorded only 10,350 hours and made £6,950.

A Ruston Hornsby-powered Lister JP4 generator was one of the more unusual lots offered for sale. Rated output at 110 volts was 18kW and the winning bid was £375.

Cousins cultivation equipment enjoys a great reputation for longevity and this 4.5m V-Form with depth wheels, razor ring packer, and 8 Quivogne low-disturbance legs also came with a set of Cousins sub-soiling legs and made £2,000.

More over page...

60 www.farmersguide.co.uk July 2019

38-67 July.indd 60

F m I C

24/06/2019 15:49

DUOLENT / TRIOLENT

TRITON

Primary stubble cultivator Cultivating and consolidating to depth of 35mm

Primary disc/tine cultivator, with large discs for effective shallow mixing & strong tines for deep loosening

>> 2/3 rows of heavy duty tines >> Excellent frame clearance copes with crop residue >> Strong frame made with high grade steel

SOFTER

>> A combination of the advantages of disc and tine cultivators >> Efficient cutting and mixing of crop residue >> Deep loosening with minimal clod formation

Compact disc for shallow cultivation & mixing with very effective working disc angle

>> 510mm or 560mm diameter disc options >> Excellent ability to deal with crop residue >> Low draft resistance

For more Information CALL NOW...

01371 830353 38-67 July.indd 61

FANTOM PRO

High output stubble cultivator Close tine spacing to ensure full cultivation at shallower depths

>> Hydraulic leveller and working depth control >> Working depths from 40mm to 150mm >> Good working clearance to cope with crop residue

sales @ jbrockandsons.com

www.jbrockandsons.com 21/06/2019 15:56

Farm Sale

...More on previous page A sale highlight was this John Deere 6630 with 4wd and 40kph PowrQuad transmission. It had 3 manual spools, TLS front axle suspension and was on Firestone 600/65R38 rear and 540/65R24 front tyres. It was new in 2012 and registered on a 12-plate but was barely run in with just 1,904 recorded hours. It sold to a North Yorkshire dealer for £40,000.

This Massey Ferguson 6480 Dyna-6 4wd was one of the included lots which sold particularly well. It was a 2007 model on an 07-plate with 3,086 recorded hours. Tyres were 520/85R38 rear and 16.9R28 fronts and as well as having front linkage and PTO the tractor was also equipped with power beyond and a crawler gear. It sold to a buyer from Ireland for £25,000.

A Green pedestrian roller with a Lister diesel engine sold for £80.

A vintage trailed sickle-bar mower needing attention sold for just £18.

This elderly Honda generator appeared in good order and sold for £40.

These Ford Model T wheels with perished tyres weren’t sold.

All of your t

Contact your local EASTERN branch today to book your on-farm demonstration. EASTERN Brigg 01652 651810 EASTERN Catfoss 01964 545300 claas-eastern.co.uk

38-67 July.indd 62

EASTERN Markham Moor 01777 838888 EASTERN Sinderby 01845 567407

EASTERN Sleaford 01529 303093 EASTERN Ulceby Cross 01507 462288

EASTERN Wilberfoss 01759 388811 A WOODS 01406 426108

facebook.com/CLAASEastern

24/06/2019 15:53

Machinery

More over page... Another sizeable lot was this Gregoire Besson DXRV Discordon 4.7m cultivator with 9 auto-reset legs. It had 2 rows of discs and a rear packer and an auto-lube kit fitted for added convenience. New in July 2001 and in weathered but tidy condition it made £6,000.

 Weaving drills command strong prices second-hand and this 2008 6m pneumatic tine drill with 48 coulters, half-width shut-off, tramline markers and wheel track eradicators made £7,000, more than half what it cost new 11 years ago.  This vintage pedestrian seed drill found a new home at £12.

This home-made grain pusher went for just £80.

 Demand for quality brand Cambridge rolls is strong and this Cousins 9.2m set was hydraulic folding with 24in rings. New in 2010 they sold at the sale for an impressive £6,900.

r tillage requirements covered.

LEMKEN – for optimum seedbed preparation and the best crop establishment.

CLAAS EASTERN 38-67 July.indd 63

24/06/2019 15:53

Machinery

Farm Sale  One of the larger lots on offer was this 2015 Proforge cultivator. It was a 4m Inverta model with discs and a packer and achieved a winning bid of £8,150.  Accurate application of small seeds and granules is of increasing interest to farmers and this Techneat Terracast V2 small seeds broadcaster came with a Garmin speed sensor plus pipes and spreader plates. It made £460.

...More on previous page This John Deere 6190R was exceptionally tidy for its age and the winning bid reflected its condition. It had 4wd, 40kph AutoQuad transmission as well as Triple Link Suspension (TLS) and cab suspension. It was AutoTrac ready, fitted with 4 electric spools and came with a 1,150kg front weight. Tyres were Michelin 710/70R38 rear and 600/65R28 fronts and registered on a 12-plate it had worked only 3,442 hours. It sold for £49,000.

The winning bidder paid £2,350 for this 1999 model Kuhn Aero 2220 20m pneumatic fertiliser spreader complete with a kit to handle micro-granules.

With only 66 working hours recorded this 2018 Honda TRX420 ATV had selectable 2/4wd and was registered on a 67-plate. It was in very good condition and achieved a winning bid of £4,600.

At the end of a very successful sale the Brown & Co on-site team is pictured (l-r) Jon Clampin; Beverley Morrison; Laura Rout; George Watchorn; Michael Alexander and James Bailey.

Mix ~ Pan Bust ~ Consolidate

Tel: 01423 324221

E mail: info @krm-ltd.co.uk

The KRM MaxiMulch features two rows of cutaway discs for high speed shallow cultivation, even residue incorporation and to encourage weed, volunteer seeds and Blackgrass to germinate. Each disc is mounted on a patented 3D system, improving penetration and mixing while at the same time reducing the power and fuel requirement when compared to traditional 2D systems. Patented TCS pan busting blades between the discs raise the soil profile in a wave, creating vertical fissures to enhance the existing soil structure for improved aeration and drainage and to encourage fast and deep root development. Choice of rear rollers for even consolidation and to leave a weatherproof seedbed surface.

Web : www. krm-ltd.co.uk

64 www.farmersguide.co.uk July 2019

38-67 July.indd 64

24/06/2019 15:58

JTE

JOE TURNER EQUIPMENT

PRODUCT RANGE › Hedgecutters › Firewood › Log Splitters › Agricultural › Forestry › Flails › Excavator Attachments › Firewood Grapple › Saw Attachments › Remote Control Mowers

PLUS...

› Used Machinery › Rotor Balancing › Spares

66248

NEW PRODUCTS

› Agriforest Log Grab

› Lipa HD Excavator Head

t 01789 763958 • f 01789 400330 • m 07836 589699 • e sales@joeturnerequipment.co.uk • www.joeturnerequipment.co.uk

Fentons of Bourne Ltd Kate’s Bridge, Thurlby, Bourne, Lincs PE10 0EN

Leading Suppliers of Paint

Better control with HDD while flushing your drains

and Specialist Coatings 66008

Tel 01778 560466 or 01778 560425 Mob 07767 816555 www.fentonsofbourne.co.uk

Coating Solutions Ltd

Homburg Dynamic Drive 1.0

SALES SERVICE HIRE

Anglia

●

Plant & Machinery (full range of vintage tractor colours)

●

Hygiene & Food Preparation

●

Containers & Storage Tanks

●

Floor Coatings

●

Roof & Cladding Coatings (metal, galvanised, asbestos, plastisol)

●

Red Oxide & Anti Corrosion Primers

A SoLuTion To ALL your pAinT requiremenTS

Tel: 01508 486057 Fax: 01508 579103

www.angliacoatingsolutions.co.uk July 2019 www.farmersguide.co.uk 65

38-67 July.indd 65

21/06/2019 15:57

News All-round loader launched The smallest Claas Torion 535 wheeled loader was displayed for the first time in the UK at the Suffolk Show in late May. The new Torion is described as an agile all-round machine built specifically with livestock holdings and special crops in mind and is powered by a 63hp Yanmar engine. Infinitely variable hydrostatic drive includes low speed

Dealer of the Year award

Y C

and transport modes. Maximum tipping load is 3.45t and overall loader height is just 2.5m making it ideal for operating in traditional farm buildings. Main dealer Manns included the new loader within a wide selection of Claas products on its stand and the sales team reported high levels of interest across the range. ■

Pole position – Colin Blow of Claas Eastern holds aloft the Claas Dealer of the Year plaque, flanked by Ken Conley of Rickerby (left) and Steve Barratt of Hamblys (right), at a presentation at Mercedes-Benz World at Brooklands in Surrey.

Pictured with the new loader (l-r) Chris Chilvers, John Clitheroe, Charlotte Gregg, Charlene Poeira, Jon Gardner, Isaac Kennedy and Eric Rippingale. 62208

The Claas UK Dealer of the Year award for 2018 has been presented to Claas Eastern, making it a double for the company, which also won the highest Platinum Dealer Excellence Award earlier in the year. The award recognises the high overall level of performance by a Claas dealer in the UK and Ireland in the areas of finance, dealer performance and customer feedback. Claas Eastern is one of the largest Claas dealerships in the UK, with 7 branches covering Lincolnshire,

Nottinghamshire and Yorkshire and employing over 100 people. The award process includes an assessment of the dealership’s overall performance as well as the performance of each of its individual branches. The award also reflects the results of the customer feedback survey and Eastern scored well in this category too. The announcement and presentation of the award was made at the Claas Dealer Council meeting, held at Mercedes-Benz World at Brooklands in Surrey. ■

TMK Tree Shear

The is efficient and strong. It provides a quick and easy way to cut and clear through hard and softwood vegetation.

Half the cost, half the time...

The TMK Tree Shear is small enough to fit on a 5 ton excavator and strong enough to be used on a 15 ton excavator Its easy fit bolt on brackets can be changed in minutes, giving the TMK Tree Shear the versatility to be used on a number of different size machines The unique design by Tenho Koponen creates a clean cut by grabbing the tree and pulling it across the fixed blade It then firmly secures the tree against the V clamp so it can be lifted and placed safely

View our website www.ncdequipment.com for more information and videos • Call 01245 320200 or Nick on 07535 211338 or Emma on 07956 087549 or email sales@ncdequipment.com 66 www.farmersguide.co.uk July 2019

38-67 July.indd 66

23/06/2019 17:36

YOUR PROFESSIONAL PARTNER FOR CULTIVATION, SEEDING AND CROP PROTECTION

You can depend on the SPRINTER drill in all conditions. For use after the plough, minimum cultivation and direct sowing.

Drift costs! The LEEB LT with award-winning BoomControl keeps the boom close to the crop. HORSCH cultivation, drilling and spraying equipment is available at your local CLAAS dealer. Please contact your local HORSCH specialist today for further details.

MANNS

CLAAS WESTERN

Chris Chilvers 07796 759332

Matthew Rice 07973 947849

CLAAS EASTERN

OLIVERS

Richard Sharman 07974 231058

William Helliwell 07894 698202

38-67 July.indd 67

21/06/2019 15:57

DIAMANT 16 – NEW OPTILINE ADJUSTMENT SYSTEM FOR PLOUGHING WITHOUT SIDE PULL

LEMKEN’s Diamant 16 fulfils ultimate requirements regarding plough technology. The Diamant 16 is not only easy to set up and operate, but impresses above all through its outstanding efficiency! Experience these highlights and many others, and discover the benefits for yourself: ■ Up to 10% fuel savings with OptiLine ■ Greater operator comfort through optional continuously adjustable hydraulic working depth adjustment

■ Improved onland version with increased distance to the furrow edge ■ Greater traction with traction booster

lemken.com

What if you could simply create the perfect seed bed?

At Dale Drills we’re as passionate about your soil as you are. As farmers we know just how vital good soil structure is to the health of your crop – locking in vital nutrients to create optimum conditions for sowing and growing. Capable of drilling in direct, min-till and conventional seedbeds our versatile range of lightweight seed drills have been made with exactly that in mind – promoting low impact cultivation that encourages minimal disturbance. Renowned for excellent contour following, accurate seed placement and a low power requirement, why not see how our drills can help your business fulfil its full potential?

daledrills.com info@daledrills.com 01652 653 326

THE FUTURE OF EFFICIENT CROP ESTABLISHMENT

68 www.farmersguide.co.uk July 2019

68-93 July.indd 68

21/06/2019 16:05

Review

Optimism prevails at soggy Cereals Attending what must have been one of the wettest events in years, the Farmers Guide team provides highlights from this year’s Cereals event; the machinery first from David Williams, followed by agronomy and general interest items later on from Dominic Kilburn and Heather Briggs, as well as more coverage in the Arable section near the front of the magazine. Establishing cereal crops with reduced soil movement was a general theme among cultivator and drill exhibitors at the Cereals event this year. Despite some larger manufacturers and importers missing from the line-up there was still plenty of new equipment to view, including several brands and models shown for the first time. Precision farming technology products and services featured strongly with latest systems promising improved compatibility and connectivity for quicker updates and easier access to information.

The view from many exhibitors was that, despite the weather, there were plenty of potential customers expressing interest and that the mood among farmers attending was mainly positive for the coming harvest – no doubt helped by recent rain which arrived just in time for most crops. With the biennial German Agritechnica show due to take place in November this year there will be plenty of new and updated machinery to choose from in 2020, but whether much of it will be on view at Cereals next year will be decided over the coming months.

Bedformer added to range Concept Farm Machinery has added bedformers to its range, which were displayed for the first time at the event. These feature an in-house manufactured gear-driven transmission and can be used for bedforming or de-stoning just by swapping the rear attachment. Working widths are 1.5–6.0m and a 2.1m model with a bedforming body is priced at approximately £9,000. The Concept range, including flail mowers, power harrows and rotary cultivators, is available through a network of specialist dealers throughout much of the UK, or direct from the importer. Pictured on the stand are managing director Joe Aleotti and his son Matthew.

Self-propelled sprayers launched On the John Deere stand Mazzotti self-propelled sprayers were launched at the event, following the purchase of the Italian manufacturer by John Deere earlier this year. Two versions included the 175hp MAF 3580 with a 3,750-litre tank and 24m booms and a larger MAF 6240 6,600-litre model powered by a 300hp engine and with 36m booms. Both are described as suitable for large-scale arable crop production and are powered by John Deere Powertech engines driving through hydrostatic transmission and with 4wd and 4-wheel steering plus ground clearance up to 1,700mm. Hydro pneumatic suspension is standard to complement travel speeds up to 50kph. Full compatibility with John Deere precision farming products includes AutoTrac steering options, GreenStar displays and JDLink wireless connectivity.

More over page... July 2019 www.farmersguide.co.uk 69

68-93 July.indd 69

25/06/2019 15:49

Precision upgrades Sly Agriculture displayed a top specification precision drill with features making it ideal for operating in strip tillage cultivation regimes. “Older precision drills are often designed for perfect power-harrowed seedbeds,” explained director George Sly. “With more farmers moving towards reduced tillage we needed a solution which could maintain a constant sowing depth in variable conditions. These row units manufactured by Harvest International offer precise planting in almost any situation and we make a mounting frame designed to optimise planting performance. It’s a proven planter offering superb performance for much less cost than other premium brands and believe it will be very popular,” he added. Also promoted by the company was availability of Precision Planting technology. “Precision planters are expensive but often larger estates will trade them in for a low price after just 10 years or so,” explained George (pictured). “But by fitting Precision Planting components such as DeltaForce, performance can be enhanced beyond that of even new machines. DeltaForce adjusts seeding depth row by row by monitoring and adjusting each unit’s seeding pressure five times every second to maintain consistent seed depth even where soil conditions vary. SpeedTube uses a conveyor belt to transport seeds one at a time down to the seed outlet avoiding any opportunity to bounce for extreme accuracy at the ...More on previous page highest working speeds and soil sensors can monitor soil and moisture conditions constantly, adjusting seeding depth to suit. “Upgrading older planters makes a lot of sense and we will be stocking product and providing a full fitting and set-up service across the UK,” he added.

Simpler connectivity

More over page...

UK Trimble distributor Vantage England and Wales demonstrated Trimble AutoSync for the first time at the event. This allows data to be shared between the field and farm office including sending work orders to machines and constant updating of field tasks making it easier to monitor progress. “Using a mobile network updates are every minute, or using a Wi-Fi connection updates are achieaved every time the machine passes within range of the Wi-Fi signal, for example when entering or exiting the farm yard,” explained Vantage national sales manager Mark Griffiths (above). “GFX750 and TMX2050 displays are compatible and the data is accessible through conventional desktops, through cloud-based access or through smartphones or tablets running the Trimble apps.” Different levels of sophistication are available starting with Farmer Starter, which is free but includes field and farm mapping and cropping data, to Farmer Pro which is the top-level with additional premium features. Also featured on the Vantage stand was Muller precision farming equipment. This was the first time Trimble and Muller brands had been displayed side-by-side by the company since Trimble acquired MullerElektronik in 2017.

The Arian 2 Mounted Sprayer Exceptional boom stability

The new Arian 2 Sprayer comes in 1200L, 1600L and 1800L tank sizes.

“

The rear folding boom has made a massive difference, it’s so quick and easy to hitch on and off the tractor. It’s a very well built sprayer and the price was reasonable. We’ve been very pleased with it; it’s doing a good job for us.

“

HOWARD WALSHAW, FARMER

For further information, please get in touch.

team-sprayers.com • 01353 661211

70 www.farmersguide.co.uk July 2019

68-93 July.indd 70

23/06/2019 18:17

66381

Less waste means more money...

Protect the quality and value of your straw in all weathers with a PROSTRAW STACK SHEET. H&S Approved mechanical fitting available. From £1,595

PJ Reed

The Parkland Agro-Master Bale Accumulator is an efficient way to reduce fuel, labour and machinery costs whilst minimising compaction with a controlled traffic system

Straw Procurement

Ma Lish rtin ma n

Hay and Straw Wanted and For Sale Hay, Wheat, Barley, Oat and Rape Prompt collection off field or barn stored. Any size bale of rape, wheat and barley straw purchased directly off the field at harvest and all year round – prompt payment. Please call to discuss

For further information please contact Paddy 07768 353910

TRACK YOUR TRACTOR

** Last year Agricultural Vehicle Theft of Tractors, Quad Bikes & ATVs in the UK amounted to £8.2m**

Zest Tracking

have a solution for only

45p a day

• long-life battery-powered telematics unit • 7 years battery life (one position per day) • IP67 sealed and rugged enclosure (waterproof) • easy self-installation

66433

TYRE & TRACK DISPOSAL

66312

Email admin@prostrawsystems.co.uk • Website www.prostrawsystems.co.uk

info@zesttracking.co.uk 01473 487787 www.zesttracking.co.uk

COLLECTION & ENVIRONMENTAL

CURTAIN VENTILATION TO GIVE YOU TOTAL CONTROL OF YOUR BUILDING

Recycling of

Agri-Truck-Industrial, Car Tyres & Tracks Supplier of heavy duty rubber rings for silage clamps

www.envirotyre.com Collection throughout Central & Eastern England

PLEASE CALL 0345 331 2747

• Automatic or manual versions • Systems made to suit any building • 4 zone systems for ultimate ventilation • Optional wind and rain sensors • Over 7 miles of our curtains in operation • Experts in natural ventilation

07795 484100 | S A L E S @ S P R I N G F A R M S Y S T E M S . C O . U K

WWW.SPRING FARMSYSTEMS.CO.UK

July 2019 www.farmersguide.co.uk 71

68-93 July.indd 71

21/06/2019 16:06

FREE 508 PAGE

INDUSTRIAL AIR COMPRESSORS

Top quality belt driven air compressors for industrial & commercial users inc; garages, factories, workshops and farms. 10 bar/150psi max working pressure £

64SUPERSTORES NATIONWIDE

VIDEO

ON-LINE

FROM ONLY

£ .98 89EXC.VAT .98 107INC.VAT

FROM ONLY HEADER

.00 229EXC.VAT £ .80 FOOTERINC.VAT 274 £

AIR DISP. MOTOR AIR EXC. INC MODEL cfm (HP) RECEIVER VAT .VAT XEV11/100(OL)†* 9 2 100ltr £399.00 £478.80 XEV16/100†* 14 3 100ltr £425.00 £510.00 XEV16/150†* 14 3 150ltr £459.00 £550.80 XEV16/200(OL)†* 14 3 200ltr £525.00 £630.00 XEV16/150(400V)†14 3 150ltr £535.00 £642.00 XE18/200 (OL)* 18 4 200ltr £579.00 £694.80 XET19/200 (OL)* 18 4 200ltr £619.00 £742.80 XEV26/200† 23 5.5 200ltr £739.00 £886.80 XE37/270 (OL)* 36 2x 4 270ltr £1169.00 £1402.80

26EXC.VAT .39 FOOTER 32 INC.VAT

PGF14

CAT131

£ HEADER .99

BEST

SELLER

HUGE CHOICE IN-STORE/ONLINE

• Auto ON/OFF float switch

SUBMERSIBLE WATER PUMPS CAT117 PSV1A

IDEAL ALL-WEATHER PROTECTION

CAN DRAW OWN WATER FROM ONLY

Honda & Diesel engine models in stock PLS195 PRESSURE ENGINE EXC. INC. MODEL BAR/PSI HP VAT VAT Tiger1800 110/1595 2.6 £229.00 £274.80 Tiger2600 170/2465 4 £289.00 £346.80 Tiger3000 200/2900 6.5 £349.00 £418.80 PLS195 186/2698 6.5 £439.00 £526.80 PLS265 260/3770 13 £669.00 £802.80

.00 229EXC.VAT £ .80 274INC.VAT £

BRIGHT WHITE INTERIOR

LENGTH UP TO 24'

Ideal for use as a garage/workshop Extra tough triple layer weatherproof cover Heavy duty powder coated steel tubing Ratchet tight ZIP CLOSE DOOR tensioning MODEL SIZE (LxWxH) EXC.VAT INC.VAT CIG81015 4.5 x 3 x 2.4M £229.00 £274.80 CIG81020 6.1 x 3 x 2.4M £289.00 £346.80 CIG81216 4.8 x 3.7 x 2.5M £279.00 £334.80 CIG81220 6.1 x 3.7 x 2.5M £339.00 £406.80 CIG81224 7.3 x 3.7 x 2.5M £419.00 £502.80

Superb range ideal for DIY, hobby & semi 8/250 -professional use * ’V’ Twin Pump ROTARY MODEL MOTOR CFM TANK EXC.VAT INC.VAT DRILLS 8/250 2HP 7.5 24ltr £89.98 £107.98 7/250 2 HP 7 24ltr £94.99 £113.99 CON1500RDV 11/250 2.5HP 9.5 24ltr £109.98 £131.98 8/510 2HP 7.5 50ltr £119.98 £143.98 11/510 2.5HP 9.5 50ltr £139.98 £167.98 16/510* 3 HP 14.5 50ltr £209.00 £250.80 Powerful heavy 16/1010* 3 HP 14.5 100ltr £259.98 £311.98 duty professional drill ideal for trade use £ HEADER .99

64EXC.VAT £ .99 FOOTER 77 INC.VAT

HEAVY DUTY PETROL POWER WASHERS

INSTANT GARAGES

TURBO AIR COMPRESSORS

INC 13MM KEYED DRILL CHUCK, 2X CHISELS, 3X SDS+ DRILL BITS & CARRY CASE

HAMMER

FROM ONLY

.98 39EXC.VAT .98 47INC.VAT

Hard wearing, versatile and comfortable. For use on various tractors and lawn mowers PRICE CUT NOW FROM

.95 59EXC.VAT .94 71 INC.VAT WASFOOTER £77.99 inc.VAT

INC.VAT £47.98 £71.98 £79.19 £101.99 £107.98

PETROL/DIESEL WATER PUMPS

Delivery & Suction hose in stock SAVE UP TO £80 ON DIESEL MODELS

.98 49EXC.VAT .98 59INC.VAT

• Min. height: 100mm • Max working height: 1090mm

.99 54EXC.VAT £ .99 65INC.VAT BEST £

SELLER

ELECTRIC/PETROL EARTH BORERS

Great for fast easy EXTENSION hole AUGER PIECES FROM ONLY boring FOR ED160A IN £ .00 STOCK - ideal 129EX.VAT for fence/ £ .80 154 INC.VAT gate posts MAXAUGER MODEL DEPTHWIDTHEXC.VAT INC.VAT CEA150 Electric 560mm 150mm £129.00 £154.80 up to ED160A Petrol NEW 1.6m 250mm £249.00 £298.80

CEMENT MIXERS

FROM ONLY

*Pumps solids up to HSEC650A 30mm diameter #Pumps solids up to 35mm diameter †Sewage cutter pump MODEL MAX FLOW LPM MAX HEAD EXC. VAT INC. VAT PSV1A* 140 5.8m £49.98 £59.98 HIPPO 2 (230V) 85 6.0m £54.99 £65.99 PVP11A# 258 11.0m £79.98 £95.98 PSP125 125 10.2m £87.99 £105.59 HSEC650A† 290 9.5m £199.98 £239.98

*Diesel #Can pump semi-trash solids up to 15mm dia. ^Can pump trash solids up to 28mm dia. MODEL PETROL OUTPUT MAX EXC.VAT INC.VAT ENGINE HEAD PW50 6.5HP 550 ltr/min 30m £149.98 £179.98 PW3 6.5HP 800 ltr/min 30m £199.98 £239.98 PS75# 7.0HP 750 ltr/min 23m £239.98 £287.98 PF75^ 7.0HP 1300 ltr/min 28m £319.00 £382.80 CHS2E 4.0HP 700 ltr/min 23m £369.00 £442.80 DW50*¥ 5.4HP 450 ltr/min 27m £359.00 £430.80 DW75*† 5.4HP 750 ltr/min 30m £439.00 £526.80 ¥was £478.80 inc.VAT †was £574.80 inc.VAT

CCM110 # 110V in stock

FROM ONLY

.00 169EXC.VAT .80 202INC.VAT

EXC. INC. MODEL MAX.CAP DRIVE VAT VAT Clarke CCM110 90L 0.7HP, 230V £169.00 £202.80 Belle Mini 150# 90L 230V £329.00 £394.80 Belle Mini 150 90L 2.5HP Honda £599.00 £718.80

VISIT YOUR LOCAL SUPERSTORE

28873

MODEL MIN-MAX AMPS EXC.VAT PRO90 24-90 £194.99 110E 30-100 £229.98 135TE Turbo 30-130 £249.98 151TE Turbo 30-150 £289.00 175TECM Turbo 30-170 £449.00 205TE Turbo 30-185 £489.00

INC.VAT £233.99 £275.98 £299.98 £346.80 £538.80 £586.80

5 TONNE FORKLIFT/TRACTOR JACK - CFT5B ONLY

EXETER 16 Trusham Rd. EX2 8QG 01392 256 744 GATESHEAD 50 Lobley Hill Rd. NE8 4YJ 0191 493 2520 GLASGOW 280 Gt Western Rd. G4 9EJ 0141 332 9231 GLOUCESTER 221A Barton St. GL1 4HY 01452 417 948 GRIMSBY ELLIS WAY, DN32 9BD 01472 354435 HULL 8-10 Holderness Rd. HU9 1EG 01482 223161 ILFORD 746-748 Eastern Ave. IG2 7HU 0208 518 4286 IPSWICH Unit 1 Ipswich Trade Centre, Commercial Road 01473 221253 LEEDS 227-229 Kirkstall Rd. LS4 2AS 0113 231 0400 LEICESTER 69 Melton Rd. LE4 6PN 0116 261 0688 LINCOLN Unit 5. The Pelham Centre. LN5 8HG 01522 543 036 LIVERPOOL 80-88 London Rd. L3 5NF 0151 709 4484 LONDON CATFORD 289/291 Southend Lane SE6 3RS 0208 695 5684 LONDON 6 Kendal Parade, Edmonton N18 020 8803 0861 LONDON 503-507 Lea Bridge Rd. Leyton, E10 020 8558 8284 LUTON Unit 1, 326 Dunstable Rd, Luton LU4 8JS 01582 728 063 MAIDSTONE 57 Upper Stone St. ME15 6HE 01622 769 572 MANCHESTER ALTRINCHAM 71 Manchester Rd. Altrincham 0161 9412 666 MANCHESTER CENTRAL 209 Bury New Road M8 8DU 0161 241 1851 MANCHESTER OPENSHAW Unit 5, Tower Mill, Ashton Old Rd 0161 223 8376 MANSFIELD 169 Chesterfield Rd. South 01623 622160 MIDDLESBROUGH Mandale Triangle, Thornaby 01642 677881

* was £215.98 inc.VAT MODEL DESC. CIR18LIC 2x 2.0Ah Li-Ion CIR18LI* 2x 4.0Ah Li-Ion

FROM ONLY

Produces sine wave & stable power, essential for computers & sensitive equipment Low noise 12V battery charging Up to 7 hours run time FROM ONLY £ .98 on 3/4 load 179EXC.VAT 4 stroke £ .98 IG1200B 215INC.VAT engine MAX WEIGHT EXC. INC. MODEL OUTPUT KG VAT VAT IG950B 800W 9.3 £179.98 £215.98 £249.98 £299.98 IG1200B 1100W 12.4 IG3500F 3400W 35 £329.00 £394.80 £349.98 £419.98 IG2000B 1800W 19.4 2200W 26.6 £389.00 £466.80 IG2200

GENERATORS

FROM ONLY

99EX.VAT .98 119INC.VAT £

PG3800

.98

Honda engine models available

.99 64EX.VAT .99 77INC.VAT

£ £

EXTRA LONG 1m LEADS STARTING MODEL BOOST 900 400 JS1100 500 910 400 JS1100C 500 4000 700 JS12/24 1000 JS12/24Li 600

EXC.VAT INC.VAT £114.99 £137.99 £169.98 £203.98

INVERTER GENERATORS

JUMP STARTS

Provides essential home, garage and roadside assistance Integral work light 910 /JS1100C include air compressor Long life battery

CHECK FRAME TYPE WHEN ORDERING

PEAK EXC. INC. AMPS VAT VAT 900 £64.99 £77.99 1100 £69.98 £83.98 900 £72.99 £87.59 1100 £79.98 £95.98 1500 £129.98 £155.98 2000 £159.98 £191.98 1200 £179.98 £215.98 BC210C

BATTERY CHARGERS/ ENGINE STARTERS

FROM ONLY

Ammeter Multi£ .99 64EX.VAT position charge .99 regulator Overload £77INC.VAT protection on charging cycle MODEL MAX AMPS CHARGE/BOOST EXC.VAT BC130C 15/120 £64.99 BC190 38/180 £94.99 BC210C 25/200 £119.98 BC410E 35/400 £139.98 WBC180 35/180 £139.98 WBC240 45/240 £159.98 BC205N 30/200 £179.98 WBC400 60/350 £199.00 BC520P 50/510 £239.00 20SPS12

INC.VAT £77.99 £113.99 £143.98 £167.98 £167.98 £191.98 £215.98 £238.80 £286.80

BARNSLEY Pontefract Rd, Barnsley, S71 1EZ 01226 732297 B’HAM GREAT BARR 4 Birmingham Rd. 0121 358 7977 B’HAM HAY MILLS 1152 Coventry Rd, Hay Mills 0121 7713433 BOLTON 1 Thynne St. BL3 6BD 01204 365799 BRADFORD 105-107 Manningham Lane. BD1 3BN 01274 390962 BRIGHTON 123 Lewes Rd, BN2 3QB 01273 915999 BRISTOL 1-3 Church Rd, Lawrence Hill. BS5 9JJ 0117 935 1060 BURTON UPON TRENT 12a Lichfield St. DE14 3QZ 01283 564 708 CAMBRIDGE 181-183 Histon Road, Cambridge. CB4 3HL 01223 322675 CARDIFF 44-46 City Rd. CF24 3DN 029 2046 5424 CARLISLE 85 London Rd. CA1 2LG 01228 591666 CHELTENHAM 84 Fairview Road. GL52 2EH 01242 514 402 CHESTER 43-45 St. James Street. CH1 3EY 01244 311258 COLCHESTER 4 North Station Rd. CO1 1RE 01206 762831 COVENTRY Bishop St. CV1 1HT 024 7622 4227 CROYDON 423-427 Brighton Rd, Sth Croydon 020 8763 0640 DARLINGTON 214 Northgate. DL1 1RB 01325 380 841 DEAL (KENT) 182-186 High St. CT14 6BQ 01304 373 434 DERBY Derwent St. DE1 2ED 01332 290 931 DONCASTER Wheatley Hall Road 01302 245 999 DUNDEE 24-26 Trades Lane. DD1 3ET 01382 225 140 EDINBURGH 163-171 Piersfield Terrace 0131 659 5919

CORDED ELECTRIC MODEL ONLY £71.98 INC. VAT

ARC/TIG WELDERS IN STOCK

HUGE RANGE OF JACKS IN STOCK

.98 149EXC.VAT .98 179INC.VAT

HUGE CHOICE INC. BOOSTER PUMPS IN STOCK NOW

TS3

FROM ONLY

.99 114EX.VAT .99 137INC.VAT

£ £

.98 LOW HIGH 169EX.VAT LIFTS LIFTS .98 FROM UPTO 203INC.VAT 70mm 730mm

£ £

.99

CFJ48

18V BRUSHLESS CIR18LIC 1/2" IMPACT 450NM WRENCHES 3 forward and reverse gears

FROM ONLY

194EX.VAT .99 233INC.VAT

TS2

FARM JACKS

SDS +

MIG WELDERS

Quality machines 135TE from Britain’s leading supplier See online for included accessories

^was £77.99 inc.VAT MODEL EXC.VAT INC.VAT #was TS3^ £59.95 £71.94 £77.99 inc.VAT TS2# £59.95 £71.94

*was £75.59 inc. VAT MODEL POWER CAP (W) (MM) EXC.VAT CON400RHD 400 10-30 £39.98 CRD1100* 1100 13-40 £59.98 CON1200RD 1200 13-40 £65.99 CON720RHD 720 13-40 £84.99 CON1500RDV 1500 13-40 £89.98

TRACTOR SEATS

DW50

FROM ONLY

IN-STORE PHONE 0844 880 1265 ONLINE www.machinemart.co.uk

WHERE QUALITY COSTS LESS

XEV16/100 †V-Twin *230V

WORKSHOP AIR TOOLS

CATALOGUE GET YOUR FREE COPY!

FROM ONLY HEADER

.00 399EXC.VAT .80 FOOTERINC.VAT 478

UP TO 7938KG CAPACITY IN STOCK ONLY HEADER MODEL CAPACITYEXC.VAT INC.VAT £FROM .98 20SPS12 907kg £79.98 £95.98 79EXC.VAT .98 35SPS12 1588kg £119.98 £143.98 £95 FOOTER INC.VAT 800SS12 3936kg £329.00 £394.80

OPEN MON-FRI 8.30-6.00, SAT 8.30-5.30, SUN 10.00-4.00

NORWICH 282a Heigham St. NR2 4LZ NOTTINGHAM 211 Lower Parliament St. PETERBOROUGH 417 Lincoln Rd. Millfield PLYMOUTH 58-64 Embankment Rd. PL4 9HY POOLE 137-139 Bournemouth Rd. Parkstone PORTSMOUTH 277-283 Copnor Rd. Copnor PRESTON 53 Blackpool Rd. PR2 6BU SHEFFIELD 453 London Rd. Heeley. S2 4HJ SIDCUP 13 Blackfen Parade, Blackfen Rd SOUTHAMPTON 516-518 Portswood Rd. SOUTHEND 1139-1141 London Rd. Leigh on Sea STOKE-ON-TRENT 382-396 Waterloo Rd. Hanley SUNDERLAND 13-15 Ryhope Rd. Grangetown SWANSEA 7 Samlet Rd. Llansamlet. SA7 9AG SWINDON 21 Victoria Rd. SN1 3AW TWICKENHAM 83-85 Heath Rd.TW1 4AW WARRINGTON Unit 3, Hawley’s Trade Pk. WIGAN 2 Harrison Street, WN5 9AU WOLVERHAMPTON Parkfield Rd. Bilston WORCESTER 48a Upper Tything. WR1 1JZ

01603 766402 0115 956 1811 01733 311770 01752 254050 01202 717913 023 9265 4777 01772 703263 0114 258 0831 0208 3042069 023 8055 7788 01702 483 742 01782 287321 0191 510 8773 01792 792969 01793 491717 020 8892 9117 01925 630 937 01942 323 785 01902 494186 01905 723451

MODEL G720 G1200 PG2500 PG3800 PG3800DV PG6500DVES

KVA 0.7 1.1 2.2 3 3 5.5

HP 6.5 7 7 13

EXC.VAT INC.VAT £99.98 £119.98 £159.98 £191.98 £179.98 £215.98 £239.98 £287.98 £269.00 £322.80 £499.00 £598.80

FUEL TRANSFER PUMPS

Ideal for dispensing diesel, light fuel oils or refueling vehicles Self-priming Includes 2m delivery hose, 2m suction hose FROM ONLY HEADER with foot .98 valve/filter £149EXC.VAT assembly £ .98 FOOTER 179 INC.VAT & nozzle MODEL MOTOR MAX FLOW EXC.VAT DFT12 12V 40l/min £149.98 DFT24 24V 40l/min £149.98 DFT230 230V 56l/min £198.99

INC.VAT £179.98 £179.98 £238.79

DRILL PRESSES

• Range of precision bench & floor presses for enthusiast, engineering CDP152B & industrial applications B = Bench mounted F = Floor standing MOTOR (W) EXC. INC. MODEL SPEEDS VAT VAT CDP5EB 350 / 5 £69.98 £83.98 CDP102B 350 / 5 £79.98 £95.98 CDP152B 450 / 12 £149.98 £179.98 FROM ONLY CDP202B 450 / 16 £189.00 £226.80 £ .98 CDP10B 370 / 12 £199.98 £239.98 £69EXC.VAT .98 CDP352F 550 / 16 £229.00 £274.80 83INC.VAT CDP452B 550 / 16 £239.00 £286.80 CDP502F 1100 / 12 £549.00 £658.80

5 EASY WAYS TO BUY... SUPERSTORES NATIONWIDE

ONLINE www.machinemart.co.uk TELESALES 0115 956 5555

CLICK & COLLECT

OVER 10,000 LOCATIONS

CALL & COLLECT AT STORES TODAY

Calls to the catalogue request number above (0844 880 1265) cost 7p per minute plus your telephone company’s network access charge. For security reasons, calls may be monitored. All prices correct at time of going to press. We reserve the right to change products and prices at any time. All offers subject to availability, E&OE.

28873 (62) FARM72 (full).indd 1 68-93 July.indd

18/04/2019 21/06/2019 13:17 16:07

Review Popular drill updated

AT 99 98

e& ial s& ent ery urs me ad oke ne C. AT 98 98 80 98 80

AT 98 98 98 98 80 80

...More on previous page On the Opico stand updates to the Sky EasyDrill featured. The main improvement is a new coulter design with fewer wearing parts. A straight seed tube improves accuracy of seed placement and a new central support made from high strength steel with a smooth profile aids trash flow and helps prevent blockages. New monobloc moulded skim coulters also improve trash flow and are lined with tungsten to increase the working life. And maintenance-free disc hubs also reduce downtime. “The improvements are subtle and will be incorporated on all new drills,” explained Sky drill specialist Joe Redman. “It’s likely there will be a slight price premium when the new price list is published, but the extended operating life of the coulter assembly and reduced maintenance will easily compensate and with blockages being almost eliminated in high trash conditions - performance will be improved. “Despite the lack of a Leader Grant this year to help finance drill

investment we have seen sales almost identical to last year and feedback from those who used the drill this season for the first time is extremely positive with growers reporting excellent looking crops. Reasons for the initial purchase vary; many in the South are reducing soil disturbance as part of the fight against black-grass while others have opted to reduce establishment costs by cutting out tillage as much as possible. There is a strong feeling that using the EasyDrill contributes to a more holistic approach to improving soil quality, and farming in a manner which is more environmentally friendly. Whatever the reason for the change the EasyDrill is a brilliantly More over page... versatile machine,” he added.

Twice the machine twice the performance

The New Amazone Ceus disc and tine cultivator. The combined action of a compact disc harrow for shallow stubble cultivation with a tine section for deep loosening, makes the Ceus-2TX cultivator the most flexible soil tillage implement in this sector.

AT 98 98 79

Working widths from 4m to 7m Ideal for all forms of soil tillage from primary cultivation through to seedbed preparation Both disc and tine elements can be run either together or in isolation adding to the flexibility

C.VAT

Choice of rollers to suit your soil type.

Hydraulic control allows the disc and tine segments to be adjusted independently.

www.amazone.co.uk

13:17

68-93 July.indd 73

Contact your local dealer or phone us on 01302 751200

23/06/2019 18:18

Moving bales efficiently Sole UK importer for the Anderson bale chaser D Clifford & Sons reported a busy event. Product sales and support manager Tom Crossland (pictured) explained that the Stackpro is the only bale chaser using a clamp to grip the bale during loading. “Once the size of bale is set then loading is fully automatic,” he explained. “There is no stress on the tractor and no need to knock each bale with a linkage-mounted push bar. The tractor hydraulics only operate the drawbar jack and transport accessories, with a PTOdriven hydraulic pump supplying oil flow for operation. It picks up bales strings down or to the sides and the loading arm is rated up to 1,100kg making it ideal for soft, damp, heavy bales.” Tom said an additional benefit of the design is that bale alignment on one side is always perfectly straight regardless of variable bale length. “When stacking in the yard a straight stack edge is easily achieved,” he said. Unloading is semi-automatic and the Stackpro 7200 displayed has a bale capacity of 27 90x90s, 16 4x3s or 12 4x4s, and costs £82,000. Also displayed by the importer was Eurotechnics Suire equipment which includes bale unrollers, bale blowers, mowers and flails plus cultivation equipment. “The Rotaking rotary weeder will be available later this year with a row of vertical cultivation discs to weed, break and aerate the soil, ideal for those looking to reduce spray costs or go organic,” added Tom.

...More on previous page

Mechanical weeders Pictured on the Lemken stand are Lemken general manager for the UK Paul Creasy (left) and Claas Eastern sales manager Richard Sharman. A new addition to the range this year is the Steketee brand offering mechanical weed control products including precision models with camera guidance. “We have had an enthusiastic reaction from customers regarding the range,” commented Richard. “Interest is mainly for precision weed control in maize and sugar beet but also for control of weeds in cereals with some growers aiming to reduce chemical use by incorporating organic weed control techniques. This includes application of pre-emergence herbicide after drilling, then hoeing once the crop is established. The accuracy of the hoe makes it suitable for crops drilled at traditional row spacing and the speed at which the hoe operates with the automatic steering is incredible. Chemical cost savings achievable will quickly pay for the hoe investment.”

Cultivation products added Ziegler importer Abrey Agricultural displayed a range of cultivation products from the German manufacturer for the first time at the event. Since becoming the official importer in 2016; Ziegler combine header trailers and maize headers have proved popular, so managing director Toby Abrey took the decision to add the company’s cultivation products to the selection on offer in the UK. “Cereals was a busy event for our team,” explained Toby. “There was considerable interest in the maize headers and although we didn’t display a combine header trailer, we were visited by dealers and farmers enquiring regarding specification, price and availability. “Our launch of Ziegler cultivation machinery went well although it was too wet to demonstrate anything and we received enquiries for Cambridge rolls, cultivators and disc harrows. We offer heavy-duty cultivators in 3 and 4m working widths and seedbed cultivators up to 5m currently with a 6m version coming next year. Discs are from 3–7m with 3m versions rigid and 5, 6 and 7m folding for transport. Hydraulic depth control is standard but

5115

More over page... adding optional front depth wheels offers improved contour following for even drilling depth and crop establishment as well as reduced fuel use.” The Abrey team is pictured; consisting of (l-r) Ziegler representative Gerhard Reich, Toby Abrey and Lewis Thake.

for Magnum & Master Trailed Rollers

Replacement Rollers Supermaxx Tined Cultivators Greenmaster Grassland Management System Front Presses

www.woxagriservices.co.uk

01670 789020

74 www.farmersguide.co.uk July 2019

68-93 July.indd 74

24/06/2019 11:18

THE NEW SLY PRECISION PLANTING SYSTEM IT’S P R E C I S E LY W H AT Y O U ’ V E BEE N L O O K I N G F O R Our new Precision Planting System is another innovative solution designed by Sly to help farmers and growers maximise crop yields and vastly improve operating efﬁciency. Precise row by row downforce control means seed depth is as accurate as seed spacing, ensuring very even emergence and higher yield potential. Active downforce also allows our planter to plant in even the toughest full-till, min-till and notill conditions.

FOR MORE INFORM ATION C ALL 0194 5 4 4 09 9 9 OR V ISIT SLYAGR I .COM

Our planters can plant a wide array of seeds from Maize, Sugar Beet, Fodder Beet, OSR, Pumpkins, Squash, Sunﬂowers and even wide spaced Cereals. Row spacings range from 25cm to 90cm depending on the row unit selected. Featuring the very best components available worldwide and tested over 2 years we have developed a planter that no other manufacturer can outperform.

SLY AGRI LTD Cliftons Bridge, Fishergate, Sutton St James Spalding PE12 0EZ, UK | +44 (0) 1945 440999 www.slyagri.com | info@slyagri.com

5115 Sly Agri Precision Planter A5 Land Ad.indd 1

20/06/2019 13:02

Advantage

Soil conservation Vertical tillage discs

Sabre Tines

Seeds, fine particles are kept on the surface

Targeted restructuring without soil inversion

Residue management

Rake & Roll

Fast and cost effective stale seed beds Excellent seed to soil contact with FT roll

Ziegler’s DISC MASTER cultivators offer UK farmers the speed and efficiency of cultivation they demand, in machines that is easy to use and maintain. All features at a glance:

UK sole importer

• Models from 3m – 7m • Choice of disc designs • Six options of rear roller • Optional seeding kit

Residue Management, Soil Conservation, No-Till...

is at the heart of Tillso and we provide British Patented Technology.

Due to the success of our Sabre Tines we are now working with Pan Anglia to market & distribute Retro Fit Sabre Tines plus all wearing parts. We believe that this will enable us to give our customers a better service with a larger stock of genuine parts.

... and many more! info@abreyagricultural.com

•

Phone: +44 (0) 1799 543208

Pond House, Pamphillions Farm, Debden, Saffron Walden, Essex CB11 3JT

Tel: 01733 270 135 Tel: 01787 242 740

65989

www.tillso.co.uk www.pananglia.com July 2019 www.farmersguide.co.uk 75

68-93 July.indd 75

21/06/2019 16:08

Spald-FmGuid-0719-132x189-Padag

19/6/19

13:38

Page 1

SIMPLE, COST EFFECTIVE SWEEPING –

push broom AVAIL ABL

FROM SLTE NOW OCK!

Parking stands protect bristles when not in use – simply release the securing pin and rotate the stand beneath the Push-Broom into the suppor t position.

2.4 m width! • Fork mounted with large securing bolts • 11 rows of bristles for maximum sweeping • Maintenance free – no moving parts, belts etc

Versatile sweeper for farmers – Ideal for grain stores and clearing water, snow, gravel, mud, slurry, etc AL SO …

AVAILABLE… HEAVY DUTY ROTARY SWEEPERS, SWEEPER COLLECTOR & BUCKET SWEEPER

Visit: www.spaldings.co.uk • Call: 01522 507600 facebook.com/spaldings.ltd • twitter.com/Spaldings

66278

KNOW THE BM Mulch Harrow

Fast and effective weed germination and slug control

DRILL

• PROVEN

ESTABLISHMENT

• RELIABLE YIELDS • PROFITABLE CROPS

Mzuri Pro-Til has a unique combination of features which create the optimum conditions for each seed to reach its full potential. • Award-winning design features

• Less soil disturbance, better soil

7.5 metre working width hydraulic adjustment of discs and tine angle

Prices start at

£12,995 plus delivery and vat

Office: 01684 311811 Nigel : 07850 825980 Ross : 07815 110529 email: info@bullocktillage.co.uk

• High quality, British engineering • Saves time, fuel & money

E: info@mzuri.eu

W: www.mzuri.eu

WITH YOU ALL THE WAY

Bullock Tillage • Danemoor Farm • Malvern • Worcestershire WR13 6NL

76 www.farmersguide.co.uk July 2019

68-93 July.indd 76

21/06/2019 16:12

Review Reduced surface disturbance

All-in-one package RTK Farming used the event to show an aftermarket automatic steering system. Suitable for fitting to almost any vehicle the system includes a motordriven steering wheel and an Android display. “Because it uses standard Android format conventional apps can be installed and run making it extremely versatile,” explained managing director PJ Walker. “This includes management systems such as Gatekeeper allowing jobs and reports to be shared between the tractor and farm office. “Being a totally remote solution means it is easily shared between multiple machines and all that is needed for precise automatic steering is an RTK signal. Most systems offer entry-level guidance and features with upgrades available by paying premiums, but this comes with full RTK from the start.” The RTK steering system was developed by RTK Farming with the manufacturer. Standard warranty is two years although this can be extended at the point of expiry and back-up is available from RTK Farming which can dial in to the screen for remote service with the owner’s permission. “It’s an advanced product with all the precision and connectivity most users need for just £9,999,” added PJ Walker, who is pictured (right) with RTK Farming sales and service ...More on previous page technician George Emms.

The Sumo team received enquiries for cultivators and drills, but marketing manager Darren Anderson said the long-established Trio remains the most popular product. The Trio is available in working widths up to 6.6m trailed, but 3.0 and 3.5m models remain most popular. “The Low Disturbance Subsoiler (LDS) is growing in popularity with discs ahead of low disturbance points minimising surface disturbance but creating fractures lower down,” he added. Pictured with the Sumo LDS are (l-r) Darren, managing director Steve English and sales director Mark Curtis.

Destined to grow A very busy show was reported by the McCormick team. Following a fouryear break from exhibiting at the event the large display included two of the flagship X8 models with up to 310hp available and features to suit larger farms and contractors. Increased dealer representation this year includes the re-appointment of Suffolk Agri-Centre which has moved back to McCormick after offering another brand for several years, LQG Agri in Warwickshire and Adcock Agri in Essex have taken on the brand and there are more appointments due to be completed in the coming months, according to national sales manager Ben Agar. Pictured (l-r) Agri Argo UK & Ireland area sales manager, Tim Lawrence; product manager, Andrew Starbuck; sales director, Ben Agar; area service manager & precision farming specialist, Luke Barnard; marketing coordinator, Rachael Walshaw; Argo Tractors product manager, Mirco Candiani and Agri Argo UK & Ireland managing director, Adrian Winnett.

65613

6th wheat drilled Nov 5th, photo May 10th

The All Weather Seed Drill for high output low input combinable cropping

tritonseeddrills.com

More over page...

At time of writing feed Barley ex-farm November is priced £30/t lower than milling wheat with perhaps 2t/ha yield deficit. The patented Triton Seed drill has allowed farmers on heavy clay soils with black grass to return to a full winter sown wheat and rape rotation due to unrivalled capability for late season drilling. Direct or into a seed bed the Triton drill and with the benefits of late season drilling can deliver dramatic savings in fixed and variable costs whilst creating the highest potential returns from a combinable crop rotation. Ideal to direct drill behind a beet harvester and also drills maize unmetered but separated. Finance available from £15,750 ex seed tank UK manufactured.

07490 647366 01223 891888 July 2019 www.farmersguide.co.uk 77

68-93 July.indd 77

24/06/2019 10:29

Mower and rake combination

Three-section boom revealed ...More on previous page Direct drill manufacturer Mzuri displayed its Razorback hedgecutter for the first time at Cereals 2017, incorporating innovative features developed to suit company owner Martin Lole’s own Worcestershire farm. Now a range of mowers has been added, also developed around Martin’s vision of what the industry needs. Taking pride of place in the centre of the stand was the Razorback RT 500 bat-wing rotary mower with a purpose-designed trailed straw rake at the rear. With three blades on each of the three rotors its primary purpose is to cut long stubble with the following rake helping reduce slug populations, create a light tilth to stimulate weed seeds to chit and incorporate chopped stubble. Double skin construction provides added durability and results in a flat top which is easily washed down. Working height is adjusted by hydraulic ram, and set using ram spacers. Full-width road lights are included as is a PTO stand and replaceable skids. The rake has five rows of tines with adjustable working angle and four wheels ensure accurate ground contour following. The harrow folds forward of the wheels reducing the length for transport.

Pictured with the new Razorback mower and rake combination are (l-r) Caitlin Donnahey, Ben Blackford, Martin Lole, Dani Bond, Ausra Landey, Will Davies, Tom Collett and Ben Knight.

On the Berthoud stand the new Axiale B3 three-fold boom was a highlight. Two have already been delivered to users in Scotland and are performing well, explained sales manager Martin Shackloth. The previous two-fold boom remains available but the triple-fold design results in less front overhang and lower overall height with the control valves mounted low on the rear linkage. “With a transport height of just 3.2m the new boom offers advantages for users and its strength is typical of the long-established Axiale boom range,” explained Martin. “It’s available in 24–33m working widths and will typically attract a price premium of £3,500–£4,000 over the double fold boom.” Pictured with with the new Axiale B3 boom are (l-r) UK marketing consultant, Gary Pooley; Martin Shackloth; technical demonstrator Cyprien Brivet; UK administrator and accounts, Lesley Olive; UK technical adviser Richard Bartels; and international business manager, Thierry Moreau.

Safer wheel removal and fitting Spaldings has added a new heavy-duty wheel changer to its range. Manufactured by Compac the new product is designed for those carrying out frequent wheel changes such as contractors. A heavy-duty hydraulic pump provides the lift capacity and wheels up to 2.3m diameter can be handled. An advantage over the previous wheel changer offered by Spaldings is that the roller table is adjustable allowing it to be slid closer or further from the back frame to suit the width of wheel and tyre being handled. The price is approximately £1,800 representing the premium specification over Spaldings’ previous version which remains available.

More over page...

66280

THE UK’S NUMBER ONE RTK CORRECTION SIGNAL BY FARMERS, FOR FARMERS

NEW SIM CARD DELIVERED RTK SERVICE ACROSS ENGLAND We can work with all makes of machinery and GPS equipment with this service IN COLLABORATION WITH ALL MANUFACTURERS COMPATIBLE WITH MOST AFTERMARKET GPS ANY NETWORK ROAMING SIM AVAILABLE

IN COLLABORATION WITH

Call for a quote 01223 902331

| RTKFarming.co.uk

78 www.farmersguide.co.uk July 2019

68-93 July.indd 78

23/06/2019 18:20

610mm & 710mm

Press Roll Rings 01673 857619 info@agricast.net

CULTIVATION PARTS & SPECIALIST SOLUTIONS

We developed our rings To be thicker, stronger and more durable than OEM parts. Renew your machine with our outstanding Press Roll Rings. Associated spools, bearings and axles available for complete assemblies.

Global Track Warehous Agricultural Tracks Extreme Heavy Duty –

Hugh Pearl Land Drainage with 60 years experience of contracting can supply all your drainage and trenching requirements from design to construction

66200

“Designed for Increased Traction and Extended Wear Life”

Hugh Pearl (Land Drainage) Ltd

• Extended wear life & decreased cutting • Extra Thick 6.5mm cables—Extreme • Friction Drive 4 year Warranty • Positive Drive 2 year Warranty • One Step Vulcanization technology

New Farm, Bobbingworth, Ongar, Essex CM5 0DJ

01277 890274 Fax: 01277 890322

0800 5877657 uk@gtweurope.co.uk www.gtweurope.co.uk

www.hughpearl.co.uk

64636

DOOR SERVICES LTD Industrial Door Specialists

• Installation • Repairs • Planned Maintenance Specialists in Building & Perimeter Security 66201

Tel/Fax: 01245 600235 Mobile: 07887 806603 e-mail: info@landjdoorservicesltd.co.uk

www.landjdoorservicesltd.co.uk

Agricultural doors Steel roller shutters – galvanised and powder coated Insulated roller shutters for cold stores Pass door and steel hinged door sets High speed rapid roll doors Insulated sectional doors

24hr call out

• • • • • •

July 2019 www.farmersguide.co.uk 79

68-93 July.indd 79

24/06/2019 11:24

NORAC Boom Height Control Systems available for select manufacturers The Beneﬁts of Boom Height Control

Reduce Operator Stress • Operators no longer have to continuously look at the boom • Allows operator to focus on drive path • Operator can go faster Cover More Acres • Work day and night – sensors do not need light to “see” • Take advantage of low wind conditions at night • Spray faster – no manual boom adjustments Other Beneﬁts/Features • Boom height control systems may offer other features such as Headlands Assist so that the boom can be automatically lifted and lowered at the end of the ﬁeld • Satisfaction guaranteed Derek Johnston +44 (0) 1228 580372 sales@precise-solutions.co.uk

Cote House, Wetheral Carlise, Cumbria CA4 8HZ 66045

Maintain Proper Spray Tip Height • Increase application efﬁciency – get the most from your spray • Too low = Streaking • Too High = Drift Issues • Ensures chemical application is not wasted due to improper boom height Protect Sprayer From Damage • Accurate control • Avoid ground strikes • Prevents downtime from repairing bent booms and broken spray nozzels Hybrid Mode™ • An advanced crop sensing feature for in-crop spraying that eliminates the need for the operator to take manual Patented control of the boom in a row crops or adverse situations such as lodged, thin and uneven crop

Precise Solutions www.precise-solutions.co.uk

66206

UNITED SEAT’S T600

DO YOU FARM IN OR AROUND THIS AREA OF THE ESSEX/SUFFOLK BORDER? If so, we’d like to buy your straw in the swath!

£150+VAT

First class seats for every journey TEK Seating, the UK’s biggest independent vehicle seating distributor for the OEM and aftermarket, offers a wide range of competitively priced, quality agricultural seats and spares from leading suppliers such as KAB Seating, Grammer, United Seats, Isringhausen and Sears. GRAMMER'S COMFORT PLUS

Based in Toppesfield, Essex, we are a small contracting company specialising in straw baling, supplying the renewable energy, animal bedding and export markets and are currently looking to increase our baled acreage for harvest 2019 within the mapped area above

HAY AND STRAW ALSO BOUGHT IN THE STACK ALL YEAR-ROUND AT COMPETITIVE PRICES

CONTRACTING SERVICES AVAILABLE PREMIUM QUALITY ROYALSTAR WHITE FLAKE DUST EXTRACTED WOOD SHAVINGS ALWAYS AVAILABLE

Please call or email Will Murphy for more information and straw pricing on

07704 246108 – will@wrmagri.co.uk

£895+VAT

KAB XH2/U4 £260+VAT

KAB 81/E6 £485+VAT

KAB INVICTUS £630+VAT

01892 515028

10% off with this advert!

sales@tekseating.co.uk | www.tekseating.co.uk

Branches: Tunbridge Wells, Kent and Rearsby, Leics

80 www.farmersguide.co.uk July 2019

68-93 July.indd 80

24/06/2019 11:26

Review Flat-pack storage

...More on previous page

Extenda Line flat-pack container stores were displayed for the first time at the event. The Extenda Line range includes general stores, chemical stores, portable offices and welfare units which all come flat-packed for ease of transport and handling. Supplied as a flat-pack kit, a 2m x 2m fully bunded chemical store costs just £1,840 while a larger 2m x 4m version is priced at £2,540. General stores in the 2m x 2m size cost £895 in a galvanised finish and larger 2m x 4m stores cost £1,320. Extenda Line sales executive Ryan McNally is pictured with one of the new bunded chemical stores at the event.

Health and safety Cross Compliance specialists CXCS has offered its services to farmers for approximately 10 years, helping businesses meet cross compliance standards and regulations and complete compulsory reports. Health and safety advice was added to the portfolio two years ago but this year is being highlighted by the company as something which many farming businesses still neglect. “We have a friendly, knowledgeable team used to dealing with farming businesses of all sizes from smallest family farms to large estates,” explained managing director Karen Powell. “Fatalities and serious injuries in farming are still far too common and although many larger businesses have been able to adjust their practises to meet health and safety requirements, for smaller farms there is limited time available for anything other than day-to-day activities which means safety assessment and recording can be forgotten. We can help by looking after administration and helping farms of all sizes meet the requirements and improve safety in the process and at Cereals we enjoyed meeting customers and letting them know how we can help. It was the first time we have exhibited at the show in recent years, and we enjoyed running through safety checklists with farmers during which they were able to earn Basis points too.” Pictured are (l-r) SAI Global agricultural manager for the UK Robin Levin who explained that his company specialises in farm assurance and often works with CXCS, Derbyshire farmer Julian Hibbert who had been finding out about services available, and Shirley Bemand, Karen Powell, Kaz Monteith and Darren Owens.

Quality products at a competitive price A new brand at the event was Alpler. The Turkish implement manufacturer has been in business since 1926 and its products account for a large market share in its home country. Products include mounted and trailed spreaders, ploughs and cultivators, all supplied with two-years’ manufacturer’s warranty and available with the benefit of zero per cent finance. Typical purchase prices compared with premium brands are 30 per cent lower, although some products offer even greater savings commented AS Tractors Ltd chairman Ray McNally. “As the importer of Armatrac tractors to the UK we have a growing network of excellent dealers and with sales increasing rapidly we wanted an implement range to offer alongside them with appeal to the same customers,” he explained. “Alpler is keen to build its UK business and has set up Alpler UK as a wholly owned subsidiary to guarantee excellent back-up and to improve stock availability for quick delivery. All Armatrac dealers have first refusal to represent the brand in their trading areas and where there is any lack of dealer coverage through our network then other dealers can also offer the range although a product selection must be stocked.” Pictured with Alpler products including a 12t capacity twin-disc trailed spreader priced at just £22,000 are (l-r) Ray McNally, Alpler export manager Erman Ustunkaya and Alpler general manager Serkan Aktas.

Power harrow sales increasing Sulky representatives (l-r) Richard German, Harvey Sherwin, Andrius Paulauskas and Rob Thurkettle are pictured with one of the company’s range of power harrows which has seen increased sales. “Our power harrows have an excellent reputation but because our drills are also so successful most have been sold as combination drilling units. Recently though, we have seen additional sales of power harrows for solus use including through one dealer which previously sold an alternative brand and has switched to Sulky with great success,” said Richard. “Our spreaders are in demand too and whereas previously the smaller and simpler DX models were most popular, they have been overtaken recently by the larger X models with high specification features improving productivity and accuracy.”

More over page... July 2019 www.farmersguide.co.uk 81

68-93 July.indd 81

23/06/2019 18:28

Review Customer benefits

New loader makes its debut

For the first time Agrifac and Hardi sprayers were displayed side-by-side at the event. Agrifac UK took over the Hardi UK business in February this year. Both brands are owned by Exel Industries and the Hardi business will continue operating as a separate entity although resources will be shared allowing more stock to be carried for faster delivery and improved aftersales service. “The additional resources will make a big difference and as well as carrying more parts in the UK we are taking on an additional service engineer,” explained Hardi UK sales director Peter Wiles. “There are more than 30 people at Agrifac UK who will assist all aspects of the Hardi business. There is very little cross-over of product between the brands and where products are similar they are at different price points. The new arrangement has been received well by dealers and customers and we have started this year with our busiest sales period for 8–10 years and have received many more enquiries for follow-up from this show.”

...More on previous page

Higher capacity Agrifac displayed its new Endurance self-propelled sprayer at the event. With an 8,000-litre tank and booms up to 56m the sprayer is designed to meet the needs of professional contractors, as well as large-scale vegetable growers and arable farms.

John Deere’s strategic alliance with Kramer through which many dealers are offering both brands is proving very successful according to Kramer dealer development manager Andrew Dixon. “Almost all John Deere’s network of UK dealers have chosen to take the franchise and in the past 18 months we have seen increased demand from all sizes and types of farm which means a wider variety of products is being supplied,” he explained. Andrew (right) and market development manager Wayne Freke are pictured with the KL60.8 articulated wheeled loader which was shown in the UK for the first time. The new handler features a 6t tip load capacity and is powered by a 156hp Deutz engine. Maximum height is 3.9m to the attachment pins although a version with longer arms offering additional height capability is available, and expected to be popular with AD plant operators. Andrew said a tele-boom version of the articulated loader is expected to join the line-up early next year with 3.9t lift capacity.

Handlers on show Clover Farm services displayed the Italian-manufactured Faresin telescopic handler at the event, alongside a selection of Armatrac tractors. The handler is powered by a Deutz engine and uses Carraro running gear and the range includes models from 2.6t capacity with 5.9m lift height to 6.5t with 9.5m maximum lift height. For those needing even more lift height, industrial models up to 16.4m are available.

More over page...

82 www.farmersguide.co.uk July 2019

68-93 July.indd 82

25/06/2019 15:50

F Q fre G0 uo e 71 te de 9 liv for er y

BARN SYSTEM

5-year warranty * 2m

1.2m

*Manufacturer’s warranty on fans only.

01621 868 138 | fans@gibbonsgroup.co.uk | www.gibbonsgroup.co.uk Woodrolfe Road, Tollesbury, Maldon, Essex CM9 8RY

Aluminium Fittings & Parts

the perfect fit for irrigation solutions

Wright Rain UK 2018, a quality name, providing a quality product. We are now based in Doncaster, ideally placed to serve the whole of the UK with our full range of aluminium pipes, fittings and parts available from stock. Our new catalogue is now available which will make it easier for users and dealers to view what we offer and select the items needed. New product catalogue available. Request your copy today.

Wright Rain UK 2018 Bawtry Road, Tickhill Doncaster DN11 9EX

Tel: +44 (0)1302 756000

Reducing the risk of flooding, land drainage and irrigation issues, together with livestock water supply concerns Water supply cut off! – Is there a contingency plan such as storage and a pumping system? These are common everyday issues for the farming community

Stuart Pumps are here to help you With the majority pumps and ancillary plant readily available from stock we are in an ideal position to fulfil your needs either planned or during an emergency

Benefits

• Large range of both new and used pumps including self-priming, borehole, fully submersible • Option of power source such as diesel/petrol/electric • Over 35 years experience serving the farming community and the water industry • Very competitive prices • Most pumps and ancillary plant available ex stock • Options for sale or rental • Maintenance service agreements available • Technical and spares support available

66223

on-line: www.stuartgroup.ltd.uk/pumps email: pumpsales@stuartgroup.info • For further info call 01953 458988

July 2019 www.farmersguide.co.uk 83

68-93 July.indd 83

21/06/2019 16:16

CROP PACKAGING PRODUCTS

ACRYLIC BARN PAINT THE SAFE ALTERNATIVE TO TAR VARNISH, BITUMEN AND CREOSOTE EASY TO APPLY EXCELLENT COLOUR RETENTION MULTI-SURFACE APPLICATION FLEXIBLE - NO CRACKING OR FLAKING LONG LASTING FINISH

Ideal for workshops sheds, garages etc. One can does it all!

STEEL ROLLER

SHUTTER

DOORS We offer a made-to-measure solution to secure workshops and grain stores • Steel roller shutters can be operated by hand chain or electric using 3 phase or single phase motors • Standard finish is galvanised with colour options of Plastisol or Powder Coating • Access doors built into the shutter or positioned in the existing walls are also available • Shutters can be made up to 8m wide with wind anchors standard over 4.5m • With 40 years experience in the roller shutter industry call us anytime for a competitive price.

65435

AVAILABLE NATIONWIDE THROUGH TRAVIS PERKINS, ERNEST DOE & SONS LTD, RIDGEONS, BREWER & SONS & DULUX DECORATOR CENTRES

e th ry n st s i du ar in ye tter u sh

BEDEC

Contact your local Massey Ferguson dealer for details

t: 01353 725 151 e: david@russellmillarltd.co.uk 84 www.farmersguide.co.uk July 2019

68-93 July.indd 84

21/06/2019 16:17

Review Inter-row drill

Saving wheelings

Following two years’ development and testing a new fully mounted interrow drill was exhibited for the first time by Weaving Machinery. Described as an affordable, flexible and manoeuvrable inter-row companion crop drill, its primary application is establishing grass and cover crops between rows of maize to minimise soil erosion, and compaction in the following crop. “We have been asked for this drill by growers keen to reduce soil damage and nitrogen leaching,” explained sales manager Simon Weaving (below). “The estimated cost of removing a tonne of nitrogen from water is £30k and three of the drills were supplied last year to farmers in Wales, the South-West and the south Midlands, and worked very successfully.” The 300-litre hopper with a volumetric metering system and RDS Artemis Lite controls can be mounted on Weaving Machinery’s low-disturbance subsoiler, Shortdiscs or on the rear of the GD drill making it extremely versatile, he added. The new drill is available in 6- and 8-row versions and the 6-row unit, the IR6001M, is priced at £16,800.

Dribble bars continue in strong demand according to slurry application specialist Vogelsang. “We are frequently asked for working widths up to 36m now by farmers and contractors keen to operate in 36m tramlines without creating additional wheelings every 18m,” explains UK agricultural products sales manager Sion Williams. “The additional cost of the wider application system is considered insignificant as it avoids the damage to crop caused by the additional passes and now the most popular width is up to 24m, although demand is also growing for 32m versions. “The X-Till strip tillage cultivator continues to attract interest although there is still a perception that it’s only for slurry application. Labour and diesel savings available through strip-tillage are considerable and using the X-Till to cultivate and incorporate slurry, then drill into the same slot using RTK guidance makes a lot of sense. It maintains moisture, saves soil erosion, provides excellent weed control through reduced surface disturbance and reduces compaction,” he adds. The X-Till is available in working sizes up to 6m with up to 12 cultivation bodies.

...More on previous page

Low-cost harrow Family-owned UK manufacturer Bullock Tillage displayed several new products. A 6m straw harrow with leading discs to chop residues and loosen surface soil remains under development as testing continues, but the version shown has performed well and is likely to be available later this year according to managing director Nigel Bullock (right). Ability to perform in a wide variety of soil types and operating conditions is ensured by hydraulic adjustment of the disc and tine angles and the harrow also features hydraulic depth control and folding. “We have included electro-hydraulic control from the cab allowing tractors with only a single spool valve to operate it,” he explained. For customers with tractors equipped with enough spools we will also supply a version without electric control. Requiring 120–170hp the new 6m harrow is priced at just £12,600.

More over page...

July 2019 www.farmersguide.co.uk 85

68-93 July.indd 85

25/06/2019 15:52

Review Busy year to continue

Easy access to replacement metal

A busy year for Team Sprayers has included factory expansion to keep up with growing demand for the company’s range and managing director Danny Hubbard said the Leader 4 trailed sprayer which was first available in early 2018 is proving especially popular. “It’s compact for the capacity with a very low centre of gravity,” he explained. “Air suspension is standard as is control through a Muller Track Guide 3 terminal. It’s a high-specification sprayer and we can offer a wide range of upgrade options including full GPS section control and automatic boom levelling. The boom folds to a horizontal position keeping it low for transport and working widths are up to 32m with tank capacity up to 5,000 litres. It’s continued to attract a lot of interest at this event and we are predicting the busy year to continue,” he added. With the Leader 4 sprayer are (l-r) technical director Phil Hubbard, Danny Hubbard and production manager Paul West.

Agricast used the event to meet new and existing customers for its substantial range of replacement wearing parts from Cambridge roll sections to press rings, cultivation discs, scrapers, bearings and sundries, along with cultivator and subsoiler legs, points and wings. Premium tungsten carbidetipped cultivation points and wings providing an extended working life are also available and weld-on tungsten blocks can be supplied. “Depite the wet conditions we had good interest on the stand, and the feeling was that those who braved the elements were there to do business,” said Agricast’s William Robinson (left) with Thomas Knights and a set of ‘bolt-on’ disc harrow assemblies introduced at the show helping to save on-farm labour.

...More on previous page

Preservatives and storage solutions designed for hay and straw with no compromise on quality

Tarpaulins to suit all bale sizes Made from the highest quality materials Designed to withstand the UK weather conditions Unique tie down system Simple, Manageable, Strong

Hay and Straw Preservative: Low application rates Treat crops up to 30% moisture Non-Corrosive @ pH6.0 More baling hours per day Faster field clearance

www.pfc-eu.com 01805 603 363 86 www.farmersguide.co.uk July 2019

68-93 July.indd 86

23/06/2019 18:34

Simple drill proving popular “Our purpose-designed drill lets us start drilling heavy land in November without worrying about the weather and, as well as successfully reducing the number of problem weeds, we are reducing establishment costs and increasing yields,” explained Triton Drills managing director Simon Chaplin. “Not every farm suffers from black-grass but being able to reliably drill cereal crops without time-consuming pre-cultivation is a benefit for any grower. We produce continuous wheats and after 10 years have no problems with take-all since moving the drilling date much later and are achieving yields of up to 10t/ ha.” On the stand was Doncaster farmer Robert Hinchcliffe. “I used a combination powerharrow drill previously but after seeing the Triton drill report in Farmers Guide early last year I visited the company and bought one. I liked the principle but remained cautious so several fields were drilled using both machines as a trial. In every case the Triton-drilled crops established better and are further forward to the extent that we have had to apply 40 extra units of N and 4 litres more of Amino A to the areas established by power-harrow drill to try to achieve an even crop. Next year we will put everything in with the Triton drill except our cover crops. It definitely does the job.” Simon (left) with the Triton drill and Robert Hinchcliffe. More over page...

Soil loosener range expands New products on the J Brock & Sons stand included an increased range of subsoilers. The SubV400M is available in 3.0 and 4.0m rigid and 3.5 to 6.0m mounted folding versions, and since the first example was displayed at the manufacturer’s open day late last year, the increased line-up was shown for the first time at Cereals. The Sub-Partner subsoiler is completely new, for mounting in front of other implements such as compact disc harrows. Each leg has single pin depth adjustment and over-load protection is provided by shear-bolts with each leg pivoting halfway down so that when it swings back, the leg is clear of the following discs. Asked about progress regarding the company’s revolutionary Campaign drill displayed last year, director Philip Brock explained that development on an entry-level version is in progress following demand from export markets although the new model will also appeal to those looking for a simpler tine drill for use in the UK. The very successful operating principle including Brock’s unique tine design will feature on both versions.

www.he-va.co.uk

distributed by

DISC ROLLER ‘CONTOUR’

Precise shallow cultivation and consolidation

Precise depth control and contour following gives uniform soil movement across the full operational width - vital if employing reduced tillage or creating stale seedbeds for blackgrass control. n

Hydraulic SAT system - “contour” following system on folding models.

Hydraulic disc depth control from the tractor seat.

2 rows of opposing 510mm sabre discs aggressive cutting and mixing.

Single or twin V-profile or twin U-profile rings optimum re-consolidation for weed germination.

Working widths from 2.25m to 7.75m.

% FINANCE

2 ANNUAL PAYMENTS FIRST PAYMENT DEC 19 ENDS 30 thJULY 2019

*See he-va.co.uk/finance for full details

* This promotion is for business purposes in the UK only (excluding Northern Ireland) for new equipment with a minimum RRP of £20,000 and is subject to credit acceptance and any qualifications in government or company policy. Finance is available on 50% of RRP or the balance to finance whichever is the lower. VAT - Hire Purchase: Full VAT on signing. Lease: VAT payable on each rental as it falls due. VAT charged at the current UK rate at time of acceptance. Administration fees are payable on all transactions including interest free agreements. Written quotations are available on request from HE-VA Finance. HE-VA Finance is a trading style of Peregrine Asset Finance Ltd, 3 Maple House, Wykeham Road, Northminster Business Park, Upper Poppleton, York, North Yorkshire, YO26 6QW. Peregrine Asset Finance Ltd is authorised and regulated by the Financial Conduct Authority number FRN649227. Peregrine Finance offers financial facilities to UK businesses only through a number of authorised funders, a list of which is available on request.

OPICO Ltd. T: 01778 421111 E: ask@opico.co.uk W: opico.co.uk Profit from our knowledge

July 2019 www.farmersguide.co.uk 87

68-93 July.indd 87

24/06/2019 11:28

Review Effective consolidation

...More on previous page

Trailed rolls featuring Guttler rings were displayed on the Wox Agri Services stand. The Magnum 1240 trailed roller consists of 12.4m of alternate large and smaller diameter rings with each larger ring riding on the shoulder of the small rings for a loose fit achieving constant cleaning. “With changes to crop establishment techniques including zero- and non-inversion tillage the crinkled ring ‘sheep foot’ profile maximises pressure to seal seed slots after drilling, even in hard ground conditions,” points out Geoffrey Wox who is pictured with Helen Wox. “It’s also an ideal roll for encouraging grass weed seeds to chit after harvest and although it offers high contact pressure the whole roll isn’t heavy at just 6.25t for the 12.4m version.” The roller range starts at 6.4m and the 12.4m version costs £24,000.

Low disturbance soil conditioning Since Dale Drills introduced its EcoXL range last year with a new layout and additional features including a larger hopper, improved folding system, easier pulling and wider working widths, demand for the larger models has significantly increased, explained sales director James Dale (left) who is pictured with fellow director Tom Dale. “We have sold 9.0, 10.0, 12.0 and 13.5m versions in the Eco-XL series and have also enjoyed a busy year supplying our most popular Eco-M-series mid-sized drills in 6.0 and 8.0m widths,” he explained. Also on the stand were models from Dale’s Meir Agricultural brand. Manufactured by Dale Drills, the Meir name is used for a range of lowdisturbance subsoilers which complement the low-disturbance drills. “The principle is low-disturbance soil conditioning,” explained James. “Narrow 15mm legs follow leading discs to minimise surface soil disturbance and the loosening bodies feature points projected well forward of the wings so fracturing and lifting are almost separate. After the soil has travelled up the long wing it falls off the back edge loosened, and the surface is left level by a following packer.” The Meir soil conditioner is available in 3, 4 and 6m folding working widths and a 6m trailed version is in development.

Low disturbance cultivator

Vertical tillage discs on Tillso’s latest Advantage trailed cultivator help minimise surface disturbance around the legs, explained Tillso managing director Chris Lane (above). Previously 3, 4 and 5m Advantage cultivators were offered in mounted format but Chris said moving to a trailed arrangement for the 6m provides additional space for vertical tillage discs ahead of the tines. “They run in front of the legs to chop trash and create a shallow tilth and with a crumb texture rather than crusted blocks of soil between the legs this reduces soil moved at surface level. Non-inversion tillage is the objective,” he confirmed. Chris added that his company is working with Pan Anglia allowing the replacement wearing parts specialist to supply genuine Tillso components, including the Sabre Tine soil loosener for retrofitting to other brands of machine.

Making the most of straw Suffolk-based PJ Reed is a straw merchant and agricultural contractor and supplies systems it has found essential to its own business to others who could benefit. Its ProStraw Systems products include straw stack covering sheets offering excellent weather protection for bales stored outside with specially designed sheet applicators for use on telescopic handlers for safe fitting without the need for ladders or working at height. “We had a very busy show and it always amazes us that even though our ProStraw System is used by many straw merchants and farms throughout the UK, at an event like Cereals we have plenty of stand visitors intrigued with the product who haven’t come across it before,” explained managing director Paddy Reed. The company is also the importer for Parkland Bale Accumulators and Paddy said the model displayed attracted considerable interest, including from potential users who had seen it advertised and were keen to inspect it at the event and meet the team behind it. Displayed for the first time by PJ Reed was the Heath Super Spike bale handling attachment. “We have been very impressed with this when using it ourselves and were keen to offer it to our customers,” said Paddy. “It attracted a lot of interest and we will also be offering a heavy duty version, designed to meet our requirements, and capable of lifting three Hesston bales or four 4x3 bales at a time.” Also on PJ Reed’s stand were members of the Ashbrook hire team. Cheshire-based Ashbrook offers tractor, telehandler and trailer hire and is keen to expand its service to cover East Anglia. PJ Reed is providing machinery storage at its Bury St Edmunds premises and will also handle logistics and machine preparation for East Anglian customers. Pictured (l-r) Richard Jones, Paddy Reed, Will Reed, Ben Faulkner, Paul Pitney and More over page... Melfin Jones.

88 www.farmersguide.co.uk July 2019

68-93 July.indd 88

23/06/2019 18:36

C B

R A D I O

Agricultural and construction Equipment. For more information please visit

ENCE NO LIC ED R I REQU

Poultry Bedders: The Biddy SD Spreader is designed for bedding poultry units of all sizes. Featuring a Direct drive hydraulic motor system it has a Rapid dispense time bedding a standard sized Poultry house in under 15 minutes. The adjustable spread pattern it will produce an even spread of material in a 180° arc whilst reducing your material usage by up to 50%

Scan for details

Call us NOW 01604 402403

www.biddyattachments.com

Specification • Direct Drive motor system • Large capacity Tapered hopper • Hardox Cutting edge • Heavy duty construction • Motor & bearing guards • Only two grease points • Interchangeable Stainless steel spinners • Unique flow control adjustment plates • 2-pac painted finish Options/ Extras: • 1.6, 2.0, 2.4 cubic metre hoppers available • Flow control valve • Dual spinner shutdown • Hydraulic tipping frame (three point linkage)

Land Aerator Applications: By reducing the soil compaction and root-bound sod, this encourages deeper grass roots, resulting in greener, thicker grass. Aeration allows the soil to obtain nutrients, absorbing all rain, fertilizer or natural waste applications and multiplies worm activity. Speciﬁcation • Double chamfered blades to reduce stress • Heavy duty Construction • Various working widths • 20mm Hardox 500 Blades • Heavy duty 80mm shaft bearings

For the complete range of ALL CB Radios & Accessories visit

www.THUNDERPOLE.co.uk

CB Radio T-800

Products: Land Aerators, High tip buckets, Poultry Bedders, Cubical Bedders, Bucket Grabs, Dispenser buckets, Beet choppers, Tilt buckets, 4 in 1 buckets, Land levellers, Hydraulic grapples

Only

£59.99

72 Glenshane road, Castledawson, Magherafelt, N.Ireland, BT45 8DQ Phone: 028 7946 9959 • Email: info@biddyattachments.com

Latest Version with New Microphone

Tom Canham Plant & Hose Ltd AGRICULTURAL SEATING

Repairs & Servicing for Agricultural & Construction Machinery  Full On-Site Services for Repairs & Welding  Full Workshop Facilities & Mobile Service Vans  Welding & Fabrication

Call Tom Canham 07767 447472

 Generator Hire  Engine Rebuilds  Machine Refurbs  Mobile Hydraulic Hose Replacement  Vehicle Diagnostics & Repairs  Air Conditioning  Lubricants and Much More...

TREAT YOURSELF TO A NEW SEAT! UnitedSeats have the answer for all makes of classic or modern tractor or telescopic handler For details of your nearest stockist:

info@unitedseats.com or ring 01604 - 300014

t: 01206 250443 m: 07767 447472 e: tcplant@btinternet.com 65977

Nortrack • Tenpenny Hill • Thorrington • CO7 8JG 65439

Forklift Brackets Weld on forklift & loader brackets to fit most makes & models JCB/Matbro £68.50+VAT UNITEDSEATS.COM all others POA All major Debit/Credit cards accepted • Same day despatch

Terry Birch Off road seating manufacturer

07966 233104/01529 455776 twbengineering@btconnect.com twbengineering.com

DI TR SC AD OU E NT S

UNITEDSEATS.COM

July 2019 www.farmersguide.co.uk 89

68-93 July.indd 89

25/06/2019 12:08

ALLROUNDER -profilineThe large and efficient cultivator for professionals

For optimum seedbed preperation, incorporation of slurry and second pass after harvesting. Available working width: 6.00 m to 14.50 m

RY â&#x20AC;¢ NEXT VE D LI

See more at our

IVERY â&#x20AC;¢N DEL AY

EXT DAY D â&#x20AC;¢N E

Contact in the UK- Steve Berry Phone: 01256 - 384208 Mobile: 07860 - 663104 | www.koeckerling.de

ONLINE SHOP

Freephone 0800 328 5492 Email sales@allertonuk.com

www.allertonuk.com

AY DELIV TD ER EX

stem ent Treatment Sy Sewage & Efï¬&#x201A;u

Specialists

In rural areas without a mains drainage system, and where septic tanks will no longer reach environmental standards,

Allerton can provide the ideal solution...

DELIVERED TO YOUR DOOR â&#x20AC;¢ Engine Lubricants â&#x20AC;¢ Motor Car Oil â&#x20AC;¢ Classic & Vintage Oils â&#x20AC;¢ Gear and Transmission Fluids â&#x20AC;¢ Horticultural Oils â&#x20AC;¢ Anti-Freeze â&#x20AC;¢ Agricultural Lubricants â&#x20AC;¢ Hydraulic Oils â&#x20AC;¢ Haulage & Off Road Lubricants â&#x20AC;¢ Fence & Barn Paints â&#x20AC;¢ Greases â&#x20AC;¢ Environmentally Sensitive & Food Safe Lubricants â&#x20AC;¢ Cleaning and Workshop Products

Trading since 1974, we pride ourselves on our individual problem-solving approach to finding alternatives for treating and disposing of raw sewage

The Allerton ConSept converts your existing septic tank or cesspit into a fully functioning Sewage Treatment Plant The Diamond Sewage Treatment Range is suitable for either individual homes or small population applications

When gravity drainage is not possible, choose Allerton Pumping Stations for sewage or dirty water

CMY

ENGINE LUBRICANTS

GEAR & HEAVY DUTY ENGINE TRANSMISSION FLUIDS LUBRICANTS

CLASSIC AND VINTAGE LUBRICANTS

GREASE RANGE

BRAKE FLUIDS

HYDRAULIC LUBRICANTS

ANTI-FREEZE & COOLANTS

ENVIRONMENTALLY HORTICULTURAL SENSITIVE LUBRICANTS LUBRICANTS

FENCE & BARN PAINT RANGE

We provide Servicing & Maintenance on a wide range of sewage treatment plants and pump stations by BRITISH WATER ACCREDITED ENGINEERS

WORKSHOP AND CLEANING PRODUCTS

www.withamgroup.co.uk

The Dependable Choice in Drainage

65440

90 www.farmersguide.co.uk July 2019

68-93 July.indd 90

21/06/2019 16:22

Review Specialist grain storage equipment

Gibbons unveiled its Airspear Max at the Cereals event.

Grain store specialist Gibbons Agricultural unveiled its newest product at Cereals last month – the Airspear Max. In a style that is popular across Europe, the new Airspear harnesses the maximum power of a 1.1kW fan for the rapid cooling of urgent hotspots in grain stores. With strong, adjustable, non-slip handles, a sharp point and no bulky adaptor, the new Airspear Max is completely portable and easy to use, says the company. Visitors were keen to see the Plug&Cool Pedestals and to hear from the team about the smart technology and innovative design featured in the Plug&Cool range. Gibbons’ packaged solution to grain storage; the Plug&Cool Barn System, incorporates Robydome

technology that allows farmers to control their store conditions via a web-based control panel. Users can access real-time information on any device, produce accurate reports and graphs, make changes, set automatic controls, and receive emails for immediate alerts of any problems, adds the company. Agricultural sales manager Matthew Gibbons said; “Cereals was another great opportunity to speak to farmers from across the UK and let them know how our specialist grain storage equipment can save them time and money. We’re very proud of our Plug&Cool range, which answers farmers’ need for equipment that is both reliable and utilises modern technology.” ■

Challenge trophy winners

The winning team from Harper Adams University were presented with the prestigious Cereals Challenge trophy and £1,000 prize money to share, plus an additional £500 for the College, by Hutchinsons chairman David Hutchinson and

Velcourt’s Matt Cobbald. Newcastle University took second place and also won the separate Environmental Challenge. L-r (front row) Matt Cobbald; David Hutchinson; Dan Hawes; Danny Richardson. L-r (back row) George Atkey and Tom Kirby. ■

Flufenacet resistance a wake up call Growers are being warned to continue to actively use integrated weed management programmes after Bayer grass weed resistance testing confirmed reduced sensitivity to key active ingredient flufenacet. The testing found, in a few isolated cases, black-grass from farms in Germany with reduced sensitivity to flufenacet. More troublingly, results show that rye-grass with enhanced metabolism resistance to flufenacet is present on a small number of UK farms. There are no results indicating flufenacet resistance in black-grass in the UK or overseas, but reduced sensitivity in Germany should act as a wake-up call to farmers here. This does not necessarily mean significant changes in weed control methods because growers are now well used to integrated control programmes to manage black-grass. However, these techniques are even more important for stewardship of the active for future years, and remain crucial for overall success of programmes. Despite reduced sensitivity being identified in black-grass samples from Germany, there is no immediate concern for pre-emergence herbicide programmes, said Bayer’s Dr Gordon Anderson-Taylor (right), speaking at Cereals. “When testing for resistance we determine the amount of active substance needed to provide 50 and 90 per cent control of a population,” he said. “The researchers noticed that, in some samples of black-grass, a larger dose of flufenacet was needed to reach the 50 and 90 per cent control level compared with sensitive type black-grass. Hence, we describe this black-grass as having reduced sensitivity. But, in all samples from the UK, applications at the commercial use rate of 240g/ha still provided 90 per cent control in lab conditions despite variability in sensitivity. “It’s also important to remember that research like this inevitably focuses on the most difficult blackgrass samples available so that experiments can provide good data to understand resistance mechanisms.” In practical terms, Bayer says it does not anticipate these results leading to a radical change in blackgrass management. A large number of growers have already successfully adopted measures such as delayed drilling, higher seed rates and spring cropping to manage black-grass populations down to lower levels before using herbicides. But product

stewardship continues to be of crucial importance. Most importantly, herbicides should be used in mixtures and sequences with other actives. The research focused on straight flufenacet but also showed that control of reduced sensitivity populations improved considerably by using flufenacet + diflufenican. This is good news for growers as co-formulated products like Liberator (flufenacet + diflufenican) have been the bedrock of pre-em herbicide programmes for many years. More worryingly, the research indicated that the efficacy of two other important actives was also affected by reduced sensitivity. When applied as single actives, both pendimethalin and prosulfocarb had lower efficacy against black-grass with reduced sensitivity to flufenacet. The research did not look at the efficacy of these actives when applied in mixtures and sequences. “No active is safe from the risk of resistance, so it is always important to vary modes of action throughout the herbicide programme to slow down the development of any resistance,” said Dr Anderson-Taylor. “Achieving the best possible results with herbicides is also important, using pre-emergence herbicides like Liberator at the true pre-em timing will get more consistent results.”

Rye-grass The situation with rye-grass is more concerning. In the study, some UK populations required over 300g/ha flufenacet applied pre-em. for 50 per cent rye-grass control and over 3kg/ ha flufenacet for 90 per cent control. These figures are well above the label rate for flufenacet which is 240g/ha, hence the resistant classification for these rye-grass strains. Researchers also found rye-grass samples from France and the USA with resistance. “The results are worrying for farmers with rye-grass problems, but I would like to emphasise that resistance is unlikely to be widespread,” said Dr Anderson-Taylor. “Once again, the research is focusing on the most resistant samples available. “Understanding the rye-grass population on your farm is essential. A resistance test can tell you the status of rye-grass and help you manage it more effectively. But there are three things all farmers dealing with ryegrass need to do to mitigate the risk: cultural controls, crop rotation and varying herbicide modes of action.” ■

July 2019 www.farmersguide.co.uk 91

68-93 July.indd 91

24/06/2019 16:10

Review ...from previous page

Increasing nutrient availability Optimising nutrient inputs and the importance of biologically active soils were one of the main messages of the talks held in the Conservation Agriculture Theatre at Cereals 2019. Between 50 and 75 per cent of applied nitrogen (N) and 90–95 per cent of phosphorus (P) in the soil is either lost or chemical bound making them not available to crops, said Plantworks managing director Robert Patten. However, living components in the soil such as mycorrhizal fungi and rhizobacteria, can help to increase nutrient availability by reducing the effects of leaching and releasing locked nutrients, making them plant available. Mr Patten said: “Soil biology is fundamental to getting the most from your crops, increasing your soil biology will increase your crops’ efficiency at using your applied nutrients.” Working symbiotically with plants, mycorrhizal fungi pass nutrients into the cortex of the root of the plant when it is in need

and take organic carbon in exchange, explained Plantworks technical director Dr Louisa Robinson-Boyer (right). In addition, as arbuscular mycorrhizal fungi can help increase effective root size by up to 700 per cent, the nutrient collection zone is significantly expanded, improving uptake efficiency of phosphate, water and nitrogen. The net of hyphae (fungal roots) formed by the fungi helps stabilise soil and reduce erosion, too. But it is not just the fungus which plays a key role; rhizobacteria are also fundamental to healthy soils and crops. For example, plant growth promoting rhizobacteria can fix nitrogen, make phosphate more soluble, improve plant hormone production and increase organic matter, she said.

Learning lessons with water With so many lessons learned after working with growers regarding slug control active metaldehyde, speaking at the event on behalf of UK Water companies, Wessex Water’s Tim Stephens (right) explained why the water industry is dedicated to working with farmers to deliver successful catchment management programmes, specifically where nitrate is concerned. “Nitrate from fertilisers and manures can be found in some groundwater sources and rivers at concentrations above the 50mg/l NO3 drinking water standard,” explained Tim. “When a key public water supply suffers high and rising nitrate concentrations, we have to make some difficult decisions,” he said. “For example, we might have to abandon that water source, or we might have to spend millions of pounds to build and operate an energy intensive removal plant,

or, we can try to tackle the problem at source and work with farmers to improve nitrogen use efficiency.” Many water companies have chosen to tackle the problem at source as this is the most sustainable option. “The installation cost of a nitrate removal plant at a groundwater source can be around £8m, and need £250,000 to run annually,” said Tim. He explained how catchment advisers work with farmers to reduce nitrate losses through informing, advising and incentivising. “As a first step, we work with farmers to help raise awareness of the issue. We then provide advice on practices that will help reduce nitrate losses to water. And finally, where alternative funding isn’t available, or where farmers incur prohibitive costs by changing farming practices, we’re increasingly offering financial support.”

They can also help to provide competitive exclusion of pathogens by occupying niches in the root area and producing natural antibiotics. She advocates using inoculum products such as rhizobacteria and mycorrhizal fungi to kick-start development of links between microbial communities and host crops, she said. “There are specific consortia of rhizobacteria suitable for application in winter and spring wheat and oats, among other crops.” Applications differ between the two organisms; mycorrhizal fungi need to be delivered at the root zone at planting as granules while the bacteria, which are in liquid form, can be applied at the surface post sowing but before too much leaf cover limits access

to the soil. “It is not necessary to add mycorrhizal fungi at every stage in the rotation; it is best to apply it when a cover crop is going in as a boost to soil biology, as this is where we have seen the best results.” Nevertheless, she insisted that the inoculum should be followed through with thoughtful ‘smart’ rotations and good land management. However, not all crops create links with the mycorrhizal fungi, she warned. While crops in the rotation such as wheat, oats, maize, barley and some field vegetables help the fungus to proliferate, others, such as oilseed rape, sugar beet and brassicas depress levels. Moving on to talk about beneficial rhizobacteria, she noted they support all crops in rotations, including combinables such as wheat and barley, alliums, field beans, and sugar beet. “A biologically active soil is the grower’s ally and helps mitigate abiotic stresses.”

Alternative weed control methods The future of weed control in arable crops could be through the use of robotic hooded and spot sprayers, according to Garford Farm Machinery managing director Philip Garford. Non-selective herbicides can be applied straight down the rows by hooded sprayers, which are already popular with field vegetable growers, and are also becoming popular with those growing sugar beet, he said. Spot sprayers are also likely to become more mainstream because it helps keep herbicide use to a bare minimum of just one to two per cent of a blanket rate. Mr Garford said: “This not only reduces input costs but also reduces their impact on the environment.” Other novel weeding methods include weed foil wipers which have a felt pad and can be used for control of weeds which have

Philip Garford.

grown above crop height by wiping them with a herbicide, he added. He went on to draw attention to robotic mechanical weeders which go down the rows between the crops and physically disturb the soil to remove weeds. “As this machinery uses video cameras to locate the crop and guide the weeder, it is much faster than a manual one as long as the crop row is dominant.”

92 www.farmersguide.co.uk July 2019

68-93 July.indd 92

23/06/2019 18:38

Better yields with lower costs using strip-tillage By moving to a strip-tillage system using the Mzuri Pro-Til 3T drill, establishment costs have dropped and yields have climbed, said Springfield Farms farm manager Ben Knight. Before the switch to strip tillage in 2010 the farm’s wheat was yielding just 7.3t/ha on a plough and press system, yet with the Mzuri system it has been averaging 11t/ha across the past 7 years. In just one pass, the Pro-Til cultivates narrow bands creating optimum seeding conditions for the seed to be placed leaving untilled soil in between the tilled zones, saving both time and fuel, he explained. The seed is then drilled and soil reconsolidated back over the seed

to provide the seed-to-soil contact needed for quick germination. “By working the top few inches in strips we ensure there is fine tilth round the seed, and we have found this works better than just direct drilling. “The number of passes required to establish a crop has also been greatly reduced, so the risk of compaction is much lower, too.” Although the farm does not use Controlled Traffic Farming (CTF) it operates with flotation tyres, and also GPS to ensure tramlines are consistent each year, he added. Other practices include widening the rotation to include cover crops which bring their own benefits from fixing nitrogen, harvesting sunlight and protecting soils over the winter,

Affordable and portable weather stations

Sencrop’s Amber Ogborn.

A recent entrant to the UK agtech sector, Royston-based Sencrop’s weather stations provide cereal and root crop growers with locationspecific data, offering high levels of accuracy, says the company. Collecting parameters such as windspeed, air temperature, humidity, rainfall, soil moisture and soil temperature, the in-field unit uploads data to the cloud for secure access from a browser or a smartphone app. According to the company’s community and communications manager, Amber Ogborn, the weather stations are ‘next generation’ technology providing growers with a simple, affordable, portable and easy-to-set-up system. In addition, while the data provided from a standalone

weather station can provide invaluable information to a grower for input decision support, the system can be linked to other stations in close proximity – sharing, collating and analysing data from multiple stations. Every user can decide whether they wish to share data through the Sencrop network. With 7,000 individual stations in operation on mainland Europe, there are now 100 units in the UK. Three models are available: Raincrop – monitors humidity, air temperature and rainfall (costs £380 plus £150 subscription). Windcrop – monitors windspeed, direction and gusts (£330 plus £150 subscription) Sencrop Plus – Raincrop and Windcrop together (£699 plus £180 subscription).

experimenting with mixes including radish, oats, vetches and mustards. Mr Knight is in favour of on-farm trials to push the boundaries of strip-tillage and get the best results. One trial in particular experimented with low seed rates that saw hybrid wheat sown at 18kg/ha go on to yield 6.5t/ha. “As hybrids are better scavengers they are better able to compete with black-grass than conventional varieties.” Other trials include glyphosatefree winter wheat, companion cropping and cover cropping. “We are a development farm, but we still have to keep an eye on the benefits and ensure everything we do remains commercially viable,” Ben concluded.

Ben Knight.

Improving nitrogen efficiency Improving plant uptake of nitrogen (N) could help reduce application rates and limit the threat of it leaching into the environment, said AminoA managing director Richard Phillips speaking at Cereals. “Amine N is normally only produced by the plant in the final stage of photosynthesis,” he explained, adding that amino acids are made up of amines and carboxylic acid and are the building blocks of protein. “When N is in this form it is three times more efficient and can trigger growth responses even during the dormant winter period. “By harnessing this form of N into a hybrid product with L-isomer amino acids plus calcium (Ca), micronutrients, fulvic and humic acid, we can further increase this

efficiency, and have created a potentially revolutionary product that maximises new root growth development and the plants’ ability to maximise the uptake of available nutrients.” He recommends applying 10-litres/ha in a mix with other plant protection products, as soon as possible in early spring and only applying other forms of N as required. “We have been trialling the product, AminoA Blaazt, since last year and have seen very high wheat protein, combined with growth responses we have never seen before. “However, we need to do more work on it yet, so we are currently seeking other farmers who would like to participate in trials.”

Wilts operator wins sprayer award

Wiltshire spray contractor, Simon Bailey, won the Farm Sprayer Operator of the Year 2019. He was presented with the trophy at the Syngenta Sprays & Sprayers arena at the Cereals event.

July 2019 www.farmersguide.co.uk 93

68-93 July.indd 93

23/06/2019 18:39

News

Efficient energy use is key for potato store operators Having day-to-day control over your store’s energy costs is now imperative, warns Crop Systems.

“Having that day-to-day control is now imperative, and via SmartStor we can tell you your costs to the nearest penny minute by minute, calculate how the multiple tariffs charged can best be exploited to your advantage and give you complete control over your store,”

Other factors

Many potato store operators are missing out on the chance to make significant savings in energy costs because they don’t have enough information on their energy usage to make informed decisions. Yet using some simple technology – as either original or retro-fit – would enable them to make the right move, says Crop Systems’ Ray Andrews (right). “I don’t think many operators realise how much energy prices vary, or how frequently in any 24 hour period they change. Bear in mind that peak energy prices are often three times higher than off-peak rates. “And these things are not fixed. I am sure many people don’t know how frequently suppliers change their pricing structures and timings. What represents the best deal today might not represent the best deal next week. “Unless you keep a constant eye on everything – or use a store controller that does that job – you risk missing out on the best prices and the

lowest available storage cost. “This was one of the priorities we set in developing the SmartStor control system,” says Ray. “This allows you to monitor and manage your store 24-hours a day, even when you are away from it. That includes enabling you to monitor the best energy prices and store fan/fridge running times. “I have great sympathy with farmers as they try to find the most competitive energy supplier. You might assume that your local farmer co-operative would give you the best price, but we have worked with farmers paying 13.5 per cent less by dealing direct with the energy company. “Our advice would be to look beyond the headline ‘unit cost’ and work out the cost including things like the capacity charge, renewal obligation, feed-in-tariff, reactive power charge, forecast charge, operational charge, data collection charge, administration, and climate levy.

While the controller is key, it is also important to make sure the parts of the store equipment that consume energy are working efficiently. “Let’s start with the fans, which are crucial to move the air through the crop and the store. Fans come in all shapes and sizes and generally push out a set quantity of air for every kw of power used – that is great if they are the correct size for the job in hand; but bad news if they are not correctly sized. “In our experience, grain fans used in potato stores can consume 35–40 per cent more energy than correctly sized fans that are designed for the job. And always remember that new fans are likely to be far more efficient than old ones,” he says. “They also need to be correctly matched to the ducts and laterals used in a bulk store, or the pressure in them may rise to above the fans’ characteristics,” adds Ray. “While you need high capacity fans to dry and cure crops – or to blast them if they come in wet – the key to efficient energy use is to know how far you can slow them down at other times of the year. “If fans are run at 80 per cent of their capacity they use half the energy they do when running at full speed.

The savings reduce when they run at lower speeds – but at that stage it is more important to ensure you are achieving the required airflow to maintain efficiency.”

Recirculation Recirculation is essential to maintain performance, he adds. If airflow is insufficient then the air will not move through the crop effectively, while too much movement risks wasting energy and may also risk increasing dehydration. Most operators are now using CO2 purging to counter conditions like blackheart, but they need to be sensible about the levels they use. If they try to reduce it to 1,500ppm it consumes a huge amount of energy. Even moving from higher levels; 3,500–4,500ppm makes a huge difference. Similar issues affect fridges, with poorly performing units often using double the energy of efficient ones, while still struggling to achieve the same effect. If the coil temperature is too low it can trigger a succession of problems – starting with fans having to run longer than ideal; the potential for premature icing which may restrict airflow; air short circuits and expansion valves shutting. Once problems start they can build up rapidly, and de-frosting simply puts unwanted heat back into the store and uses more energy. Installing a control system that enables you to keep a constant eye on problems like this – and which also sends you an alarm message as soon as the problem is detected – makes good sense, both in terms of keeping your stored crop in best condition and in terms of controlling storage costs, advises Ray. ■

Cousins Precision Seedbed Harrow the best start you can give your beet. ■ 3m Rigid, 4, 5, 6 & 8m Folding Models ■ All models Fully Trailed ■ Numerous Tine and Roller options to suit individual requirements ■ All elements Fully Adjustable ■ NEW OPTION – now available with Extra Following Roller to rear for an enhanced finish

66007

Call today or visit cousinsofemneth.co.uk for details sales@cousinsofemneth.co.uk

Tel. 01945 584600

94 www.farmersguide.co.uk July 2019

94-105 July.indd 94

23/06/2019 19:12

Machinery

Open Day

New depot investment means dealer is fit for the future

The o Elling

One of the UK’s two original John Deere main dealers has celebrated the opening of a prestigious new depot in Cambridgeshire. David Williams reports. Ben Burgess started trading in 1931, took on the John Deere franchise in 1964, and now the family-owned business operates from six depots in Norfolk, Suffolk and Cambridgeshire looking after agricultural, construction, grounds care and retail customers. The new Ellington depot was completed in early 2019 and replaces previous rented premises at the same location which the business had outgrown. Adjacent to the A14, the 3ha site offers easy access for all sizes of vehicle and open road frontage makes it ideal to display all the dealer’s product lines.

Quality brands Along with John Deere, key brands represented include Manitou, Kuhn, Weidemann, Avant, Stihl and Timberwolf, and a large showroom and retail store displays a wide range of complementary products such as work clothing, tools, mowers and grounds care equipment plus toys and scale models. The open day, in mid-May, attracted more than 300 visitors keen to inspect the new premises and find out about the product ranges displayed. Depot manager Tim Vacher was delighted with the attendance; “The open day was a huge success. The new building is light and spacious and the location is convenient for customers who have seen it growing over the past few months to have their machines serviced, and browse the new machinery and the latest technology. The Ben Burgess team has worked incredibly hard to make this open day a success and they succeeded. It was great to see so many existing and new customers and I would

like to thank our team for its commitment to our customers.” Most agricultural customers served by the new depot are in Cambridgeshire, Bedfordshire and Northamptonshire as well as some further afield, but the dealer also looks after many grounds care customers including major golf clubs and amenity contractors across the Midlands. Ben Burgess-owned Greencrop Irrigation products and services are also available through the new depot.

The new depot will service customers as far afield as the West Midlands for grounds care products and mainly in Cambridgeshire, Bedfordshire and Northamptonshire for agricultural machinery. Pictured l-r Tim Mack, Karen Garnham and James Garnham of K Garnham Design, Shailesh Vara MP, Ben B Turner, Ben Turner, Jimmy Lockhart, David Fairman and Tim Vacher.

Investment was needed “Our business had grown to the point where the previous premises limited what we could achieve,” explained Tim. “The workshop could accommodate one large combine and a tractor and, although we were very busy and needed a larger team, there wasn’t the space to allow them to work efficiently. Our new workshop includes six bays, one dedicated to grounds care products and the other five can each accommodate the biggest combines or tractors. An additional building is continued over...

The open day included all the latest John Deere machinery complemented by a selection from main suppliers including Kuhn, Manitou and Weidemann.

More than 300 customers attended including some new to the dealer, keen to find out what products and services will be offered.

The new depot’s frontage is beside the A14 making it ideal to showcase machinery and services offered.

July 2019 www.farmersguide.co.uk 95

94-105 July.indd 95

24/06/2019 16:12

Machinery

Open Day

 Ben Burgess managing director Ben Turner (left) cutting the ribbon with North West Cambridgeshire and former government minister Shailesh Vara MP.  Tools, sundries, clothing and toys are displayed along with garden machinery in the retail store.

...from previous page

available for storing larger machines or for product handovers and training, with five large bays, each with its own roller door for access. “Since moving in to the new premises we have increased the team size from 11 to 22 of which 12 are in the workshops, and we plan to take on at least another 2 staff later this year.” Two of the new workshop staff recruited are apprentices and Tim said that this fits well with the dealer’s ambitions for the future including ensuring those with enthusiasm and interest in agricultural machines can have the opportunity to develop their skills with structured training and guidance. The official opening was by North West Cambridgeshire and former government minister Shailesh Vara MP, who had supported the planning

application and he complimented its architecture, position and appeal. “Ben Burgess is going from strength to strength and engaging the next generation in this business,” he said.

Next generation Ben Burgess managing director Ben Turner, is keen for the company to not only expand, but also support anyone with an interest in the industry. He said, “It is often the case that business events like this are restricted to those in the commercial world and not open to the general public, children and families. Here at Ben Burgess we wanted to ensure that as many as possible could join us and enjoy the great atmosphere and food. By doing this; we hope to inspire the next generation to learn more about the agricultural, grounds care and construction industries.”

Confidence for the future Attending the opening was farmer and contractor Jon Eayrs. “The new

depot is just what was needed to maintain premium service backing up premium products,” he said. “As well as extra workshop space, additional room for more secondhand equipment will make it easier for us to look at and consider options when anything is needed. We started dealing with the team in 2000, so have known quite a few of the staff for many years, and they are all friendly and easy to deal with. We worried that as the business grew personal service would be lost, but that hasn’t happened. The larger parts stores and a bigger service team ensure even better service for our farm and our grass cutting and agricultural contracting operations, so we look forward to working with John Deere products and Ben Burgess in the future.” Tim added: “Customer comments at the event were extremely positive and feedback confirmed the view that Ben Burgess is here to stay with its long-term investment in the industry. This building and our expanding team reassures users that we have the capability to look after their needs for the future.” ■

Members of the Ben Burgess team at the open day l-r: Michael Casanova; Mark Cox; Holly Drew; Richard English; Simon Worboys; Ollie Owen; Dominic Truman; Joe Aspden; Alan Amey, Gemma Cook, Martin Underwood, Ben Conway, Ed Dawson, Neal Hussey, Rupert Greest; Robert White; Craig Kay; David Mason; Tim Vacher; Paul Thomas; Brandon King; Martin Fuller; Stuart Jones; Anthony Mottram and Hollie Cruickshank.

Jon Eayrs, pictured (right) with Ben Burgess GroundsCare Equipment sales representative Paul Thomas, is a farmer and contractor based near Huntingdon. Trading as Nightingale Grass he offers a grass cutting contracting service specialising in amenity areas and sports grounds and also works with his father on the family farm trading as Hilgrave Farming from where an agricultural contracting business is offered in conjunction with a neighbouring farmer. John Deere machinery includes a 6215R tractor and two combines, all bought through Ben Burgess. “For both grounds care and agricultural products the backup is excellent and the depot is local too, which helps. Sales, parts and service staff are all friendly and always helpful and quality products are stocked,” he commented.

Young open day visitor Annabelle Pike is pictured trying out a Roberine flail mower.

Local beer from Norfolk-based Woodforde’s Brewery proved popular; served at the event and presented to visitors in commemorative bottles marking the occasion.

96 www.farmersguide.co.uk July 2019

94-105 July.indd 96

24/06/2019 16:12

News

Additions to trailer range Agricultural equipment manufacturer, SlurryKat has recently expanded its Panterra range of trailers, to offer customers an alternative specification while still maintaining reputable build quality and reliability. The Panterra range allows the end user to enjoy the same high quality components and build quality found in all SlurryKat equipment, without having to opt for the higher specification engineering features that are found as standard in its premium range, geared to suit very intensive users such as contractors, says the company. The introduction of the new Panterra trailer range follows on from the launch of the successful Panterra tanker name in 2016, which saw the establishment of the Panterra name within the SlurryKat brand. This range allowed the company to double tanker production not only with the addition of the Panterra tank but also by increasing the sales of the established premium line tankers. The new Panterra trailer range consists of two lines; low loader trailers and drop-side general purpose trailers. The low loader range consists of two versions; a tandem axle 16t and tri-axle 24t. Standard features include sprung ramps, full LED lighting package, 80kph axles, heavy-duty multi-leaf suspension, side crash rails and finished in SlurryKat’s trademark highly durable 2-pack red paint. Optional extras include dual air and hydraulic brakes, aluminium lockable toolbox and alternative colour paint finish. The drop side general purpose trailer range consists of four models; 8, 10, 12 and 14t, all of which come as standard with tandem axles and hydraulic brakes, full LED lighting package and SlurryKat’s two-pack red paint finish. Other features include a single tipping cylinder, which is carried across from the company’s premium trailer range, offering an unrivalled fast and efficient tipping cycle. Sides and posts are easily removable to leave a flat trailer for other uses like bale transport. Optional extras include floatation tyres, dual air and hydraulic brakes and an alternative colour paint. A common complaint with this type of trailer is that the user has to leave the cab and manually open the tail

door but SlurryKat says it has solved this problem with the introduction of a hydraulic latch rear door which saves both time and effort for the operator. The drop side trailers are also available in a heavy-duty version for more arduous applications if required. Prices for the drop-side range start from £5,950, while the low loader costs from £8,500. ■ The new Panterra trailer range consists of two lines; low loader (pictured) and dropside general purpose trailers.

www.he-va.co.uk

distributed by

HE-VA ROLLS Much more than consolidation...

HE-VA’s hydraulically folding rolls adapt to the contours to efficiently consolidate and level AND can be used for much more. Add an OPICO Micro-pro to the King Roller range and take care of slug control or use for precise Avadex application. Add shattaboards or tines to Tip rolls and create a multipurpose cultivator. Tip and King Rolls have the unique hydraulic SAT system as standard, so that weight is transferred evenly across the full working width. n n n n

King rolls 12.3m to 20.3m Tip XL rolls 12.3m – 15.3m Tip rolls 4.5m – 10.2m Vip rolls 4.5m – 8.2m

% FINANCE

2 ANNUAL PAYMENTS FIRST PAYMENT DEC 19 ENDS 30 thJULY 2019

*See he-va.co.uk/finance for full details

OPICO Ltd. T: 01778 421111 E: ask@opico.co.uk W: opico.co.uk Profit from our knowledge

July 2019 www.farmersguide.co.uk 97

94-105 July.indd 97

24/06/2019 16:13

News Strong demand for key dealer A busy Suffolk Show was reported by both the Case IH and New Holland divisions of Ernest Doe & Sons. Ernest Doe Power sales manager Gerald Silvey said that following a good start to the year, demand for all products continues strong. “We have a great range of brands and products to offer for all types and sizes of farm and, with farmers and contractors keen

to ensure they operate efficiently and profitably, our sales teams are ideally equipped to offer solutions. We are looking forward to harvest and the opportunity to demonstrate the latest combine harvesters to potential users followed by cultivation and drill demonstrations with a growing list of requests to fulfil.” ■

David Evans (left) is welcomed by New Holland area sales manager, George Mills.

Dealer appointment in South Wales

The Ernest Doe & Sons stand at the Suffolk Show was shared by Ernest Doe and Ernest Dow Power divisions.

New Holland has announced the appointment of David Evans Agricultural Ltd to cover the vacant territory around Bridgend in South Wales. Located in the heart of The Vale of Glamorgan in Llancarfan near Cardiff, the company covers the M4 corridor from Chepstow to The Gower. Founded by David Evans in 1993, the company has been established for over 25 years and has built its reputation on service and quality brands which offer a good resale and part-ex value. The dealership will supply the full range of New Holland products including tractors, harvest

machinery, telescopic handlers and construction equipment and will bring to customers in the area a great level of agricultural equipment knowledge and customer assistance. “We have built our business with one mission in mind; to supply quality, reliable and efficient new and used machinery while backing this up with an excellent service for today’s farmer and agricultural contractor,” said DEAL managing director, David Evans. “We are excited with this latest move to grow our business in the area, together with the New Holland brand, our loyal customers and the many new ones we look forward to welcoming.” ■

PRE HARVEST GRAIN STORE TREATMENTS of rts rs pa lie T pp NI su A w R No ity G al qu

from our bases in Suffolk & Yorkshire

AGRICULTURAL ENGINEERS

66320 66006

01473 info@alphafumigation.co.uk www.alphafumigation.co.uk 623001

ISHED VES, A RTS – CONACDERS, etc A P R S E T S E V AR PRE COMBINE HES, SIEVES, CHAFF S IV N K RAPE MODELS ur own L MAKES & facturing o Now manu T Y CONCAVES – ALtails... l HEAVY DUORDER see website fokr /cdeoncaves_user_story.htm O .u T MADE mbinefabrications.co All Enquiries Welcome o d REFURB

NEW an pecialists in

www.c

Hilltop Farm, Danethorpe Hill, Newark, Notts NG24 2PD

01636 702524 07976 696712

sales@combinefabs.co.uk

98 www.farmersguide.co.uk July 2019

94-105 July.indd 98

25/06/2019 15:54

Machinery

Harvester demonstration

Sussex demonstration highlights green harvest line-up

An opportunity to get behind the wheel of models in New Holland’s Forage Cruiser forage harvester line-up also provided a demonstration of the company’s growing range of mowers, rakes and tedders plus updated handlers and tractors. David Williams tried them out. The demonstration was on grassland owned by Goodwood Estate, which includes 1,400ha of all-arable rotation cropping within its 4,600ha land area. The farm has been dedicated to organic food production for 17 years and the grassland had suffered during months of drier than average weather but the demonstration field allowed the benefits of New Holland’s design features to be highlighted at the event. Along with five forage harvesters there were mowers, rakes and tedders in New Holland colours following the acquisition in 2017 of Kongskilde’s machinery division, and also featuring were the latest T7-HD tractors and the new T6.175 with DynamicCommand transmission. The latest telescopic handler and a wheeled loader were also available to try.

Brand updates The event commenced with a description of New Holland’s recent business performance by business director for UK and Ireland Pat Smith who explained that 52 per cent of CNH Industrial’s revenue is from Europe and that unit numbers in the UK this year so far are up 15.7 per cent on the same period last year, on a like-for-like basis and excluding implements. Marketing manager Mark Crosby highlighted celebrations marking 60

years of harvesters since the Claeys models were first sold in 1959 and 100 years since the first Fiats were sold which is being marked by limited edition terracotta-coloured New Holland tractors. Mark went on to highlight that 45 per cent of tractors produced at Basildon last year were T6 models with T7 std and T7 long wheelbase machines accounting for 25 per cent each. T7 HD tractors took 5 per cent of production.

 The demonstration provided an opportunity to get to grips with the FR650 and FR780 models.  Intake options include high performance feed rolls (standard on the FR920) and DualDrive which uses a secondary hydraulic motor solely to drive the header for increased crop handling capability.

Strong investment New Holland has invested heavily in forage harvester development in recent years and it was stated at the event that the company’s target for European market share is second place minimum. The FR Forage Cruiser line-up includes 5 models from 476–911hp, all powered by FPT engines. Product specialist for hay and forage Ian Bourke said “FPT engines provide excellent torque back-up which is essential for forage harvesting where working loads are rarely consistent. Up to 48 per cent torque rise is available on the flagship FR920 and lower down the range the FR650 has recently been tested by DLG confirming superb fuel economy with only 0.45 litres of diesel consumed per tonne of chopped

silage, at a chop length of 19mm.”

Drums to suit There are 5 drums to choose from, but for grass a rotor with a staggered double set of 10 blades in a chevron configuration is most popular while for biogas maize a rotor with two sets of 20 knives gives a finer chop. Standard chop lengths achievable are 2–33mm and a high-speed pulley drive is an option extending the chop length range available. New Holland believes its drum is the toughest on the market; stating that as well as chopping grass, wholecrop and maize it is also fully approved for coppicing, chopping woody vegetation up to 150mm diameter.

“We use the largest drum of any manufacturer which means forage passes through the chopper in a wide but thin mat, promoting an efficient cutting action,” explained forage harvester specialist Ian Bourke. Automatic blade sharpening is standard and New Holland gives an option to sharpen with drum rotation reversed for a more effective cutting edge and extending working life. The continued over...

The FR Forage Cruiser model range Model Engine Engine size/ cyl Max hp Torque Nm@1,500rpm Torque rise 2,100–1,500rpm Drum cylinder width Drum cylinder diameter

FR480 FPT Cursor 13 12.9-litre/ 6 476 2,003 38%

FR550

544 2,316 38%

FR650 FPT Cursor 16 15.927-litre/6 653 2,751 37% 884mm 710mm

FR780

775 3,323 38%

FR920 FPT V20 20.100-litre/V8 911 4,095 48% Cabs are comfortable and quiet and offer superb visibility.

July 2019 www.farmersguide.co.uk 99

94-105 July.indd 99

25/06/2019 11:13

Harvester demonstration Control layout is well designed so that everything is within easy reach. The large IntelliView 4, 26.4cm touch-screen and CommandGrip joystick work together well for simple operation.

...from previous page

shearbar is adjusted from the cab automatically and two knock sensors detect the touch of the blades, then back off to achieve 0.1mm clearance.

Precise LOC HydroLoc is New Holland’s system for maintaining precise chop length, even in variable conditions, with set up through the Intelliview 4 monitor from the cab. ActiveLOC is an option, adapting the length of cut to suit the crop conditions using constant realtime moisture sensing for increased clamp density and improved silage quality. An aggressive feed roller profile ensures a firm grip on forage for constant feed to the chopper. The intake drive is by hydraulic motor for step-less speed adjustment and three feed rolls – two at the top and one at the bottom transfer the crop. “We use fewer feed rollers than some competitor machines as the whole system can be stopped in under 300 milli-seconds,” said Ian. “If metal is detected; a hydraulic valve shuts off oil flow creating a hydraulic lock and stopping the whole system almost instantly," he added. The harvester is also protected by RockAlert, which detects stones through monitoring feed roll movement. Sudden rapid vertical movement triggers the system and the power reverser ejects crop automatically. Chop length is set in the cab

through external high-low range adjustment of the length-of-cut gearbox. A new high-performance feed roll module is an option for all models except the base FR480 and is standard on the FR780 and FR920. The upgrade provides smoother crop delivery and is designed for longer life working in intensive conditions, with an additional 22 grease lubrication points supplied through centralised greasing.

Efficient collection Maize headers are made for New Holland by Kemper and working widths include 8-,10- and 12-rows. New Holland manufactures its own grass headers in 3.0 and 3.8m. Grass pick-ups have 5 tine bars. A double drive option includes a second hydraulic motor for independent drive to the attachment. This provides more power for the header and allows independent speed adjustment. A second hydrostatic motor drives the auger allowing a speed differential to be maintained to tease lumps out of the swath for a smoother crop flow when conditions demand.

Corn cracker line-up Maize processor options include standard rotor pairs with 99, 126 or 166 teeth with a speed differential of 10, 22, 30, 40 or 50 per cent and the heavier duty DuraCracker for intensive processing by chromed rollers with

The New Holland implements team is pictured at the event (l-r) Charlie Thompson, Steve Mitchell, Edward East and Tim Lowden.

100 or 130 teeth and with a speed differential of 30 or 40 per cent and driven by a belt with 13 per cent additional pulley wrap to reduce risk of slippage. For effective shredding of longerchopped forage the DuraShredder has 110 or 138 teeth cut in a spiral pattern, and operates at a speed differential of 30 or 40 per cent. A convenient feature of New Holland’s design is the VariFlow crop processor arrangement which allows the user to activate or deactivate the maize processor in under two minutes. When not needed it is moved into a position behind the crop flow but continues to turn while receiving lubrication through the auto-greasing system. The spout has over 210 degrees rotational travel and the demonstration highlighted the advantage of angling it well forward of centre allowing the harvester driver to see at a glance how trailer filling is progressing, without having to look over his shoulder. Up to 6.4m spout elevation ensures clearance for the highest silage trailers. The spout flap provides precise filling with simple adjustment from the CommandGrip joystick. Optional automatic trailer filling is available. IntelliFill uses 3d camera images with capability to recognise trailer sides so there is no need for individual programming for each trailer.

Functional design The practical Forage Cruiser design includes a narrow chassis to provide a tight steering angle with a 6.4m turning radius, which means when harvesting with a 10-row maize header no headland shunting is required. The engine is longitudinal in the chassis and mounted low for stability. The chassis is the same across the range and provides a minimum transport width of just 3.15m depending on wheel equipment. Mechanical 4wd is by propshaft to the rear axle and heavy-duty 4wd through New Holland’s Terralock is an option for all models except the FR920 on which it is standard. Terralock includes technology borrowed from the company’s tractors with automatic engagement and disengagement of 4wd at a pre-set steering angle between 10–35 degrees. New cab steps provide easy access and the cab itself is spacious and well laid out, making the most of available

space. What immediately impresses is the visibility, especially to the front and sides. A curved rear window and narrow rear corner pillars improve vision and safety to the rear. Up to three optional cameras can be fitted with display through the Intelliview 4 terminal. A selection of three seat grades is available and comfort is impressive including exceptionally low noise levels (just 76dB(A). Set-up is through the touch display and adjustment and control of all work functions are through the CommandGrip joystick. All the work function and adjustment switches along with the display are on a seat arm-mounted control panel. The demonstration provided plenty of time to get used to the machine’s controls and within just a few bouts the novice Farmers Guide driver was operating the harvester without prompts from the trainer. The joystick buttons are well arranged with a positive ‘feel’, which means that, with familiarity, there is little need to look for the controls. Travel direction and speed control through the joystick is simple and progressive. Moving the stick forward further provides a pulse of acceleration proportionate to the amount of travel and nudging it forward or back briefly adjusts the speed in fine increments to suit the swath or to assist the trailer driver.

Flexible and efficient Two selectable automatic working modes are available. Power Cruise 2 automatically adjusts the engine and ground speed in relation to actual load providing potential fuel savings up to 15 per cent. During periods when load is reduced such as when turning on headlands the engine speed reduces, increasing again when needed. Eco engine management mode has two settings; a high range - where engine speed can be set between 1,950–2,100rpm ideal for foraging grass, and a lower range between 1,700–1,850rpm where higher torque is available and ideal for harvesting maize. The operator sets the desired engine speed and Eco management adjusts constantly to ensure the engine remains fully loaded for operating efficiency and performance, while constant forward speed is maintained. Maximum 40kph transport speed is achieved at just 1,200rpm.

Precision IntelliSteer is an option for accurate guidance and automatic steering and includes functionality to transfer guidance information from the tractor to the harvester for precise

100 www.farmersguide.co.uk July 2019

94-105 July.indd 100

25/06/2019 15:57

Machinery compatibility with maize rows whether drilled straight or in curves. Full telematics allows data including performance information and yield mapping to be shared between the machine and farm office, with simple data management available through MyNewHolland.com. New Holland’s latest FR Forage Cruisers impressed at

the demonstration and for those spending long hours in the seat the cabs are hard to beat. Independently verified fuel use information suggests the design is efficient and with models to suit farms and contractors harvesting multiple crops and a comprehensive dealer network providing back-up, the brand is well worth considering.

New TH telehandlers replace previous TM models and apart from the change to yellow livery the main operational difference is a new transmission and axles. There are six models in four specification levels and the top Elite version includes an armrestmounted joystick.

New Holland’s flagship W170D wheel loader at the event was kept busy on the silage clamp. There are 3 models in the D-series line-up with 4.5-litre or 6.7-litre power units.

New Holland’s Fiat Centenario Limited Edition tractors celebrate 100 years since Fiat tractor production started.

Grassland implements

New Holland used the event to demonstrate its mowers, rakes and tedders available since the company’s acquisition of Kongskilde Agriculture. Mowers offered now include front- and rear-mounted and lateral and central pull. The DiscCutter F320P front mower-conditioner demonstrated has a 3.11m working width and uses Polyethylene conditioner fingers, considered safer than metal for livestock fodder production. Two springs maintain gentle ground contact and accurate contour following. The blades have a twist profile and are designed to twist upward and prevent bed damage in the event of impact. A full width skid with the two outside blades rotating inwards is standard. Fins at the rear are easily adjusted to shape the swath and setting the unit for mowing only, or mowing with conditioning just requires the position of the internal deflector to be set to suit. The rear DiscCutter 320P is a similar design with hydraulic break-back protection. In the event of striking an obstruction it’s designed to move to the rear and lift clear of the ground.

Tractor updates Product marketing specialist for high horsepower tractors David Redman is pictured with the T7.315 HD, which meets Stage 5 emissions regulations without needing Exhaust Gas Recirculation (EGR). “Because the tractor has no EGR the service interval has been increased from 600–750 hours,” he explained. “An additional catalyst in the SCR chamber is used to meet exhaust gas requirements using only Adblue.” David said PLM Connect telematics are now standard and that a useful addition to the equipment included is an air line connector and hose for easy cleaning in the field. Other tractor news includes the addition of Intelligent Trailer Braking which is available on T7 and T6 AutoCommand models. A torque sensor in the transmission monitors deceleration, and engages the trailer brakes if over-run is detected. The T6.175 DynamicCommand tractor was available to test drive with optional Ground Speed Management 2. “This makes the DCT transmission behave in many respects like a CVT and a feature exclusive to New Holland is that target speeds can be set and maintained with engine revs as low as possible through automatic gear selection. A clever feature is that when changing down the system detects if a sudden speed change will occur and automatically ‘blips’ the throttle to avoid the jolt. Brake-toclutch is an option as is Custom Steer which can be set for different rates of operation in forward and reverse gears.”

The double-rotor rake did an excellent job of creating a swath from the sometimes sparse forage, leaving little behind without introducing soil and stones.

Pictured at the event are (l-r) New Holland area sales manager Brian Magee; marketing manager Mark Crosby; general sales manager for harvesting products, James Doyle; and forage harvester and balers product marketing specialist, Ian Bourke.

July 2019 www.farmersguide.co.uk 101

94-105 July.indd 101

25/06/2019 16:02

New depot investment will benefit Sussex and Hampshire farmers  The opening of RW Crawford’s new Billingshurst depot from which the dealer will look after customers in Hampshire and Sussex, attracted farmers and contractors from across the south and south-east.  Vaderstad products have been added to RW Crawford’s sales and service offering and were displayed for the first time at the open day.

and maintained in prime working condition,” he said.

Early demand

Agco main dealer RW Crawford which started trading in Essex in 1980 buying and selling used machinery, recently opened its third depot – extending its coverage to include farmers and contractors in Sussex and Hampshire. David Williams attended. With its headquarters remaining at South Woodham Ferrers in Essex, in 2013 RW Crawford opened a new depot in Charing, near Ashford, Kent having been appointed by Agco to represent Fendt and Challenger in the area. In 2018, with its original facilities outgrown, a new headquarters at Writtle near Chelmsford, Essex was opened representing considerable investment to ensure users of Agco’s Massey Ferguson, Fendt and Valtra brands receive the sales and aftersales service they need in Essex and east Hertfordshire. The new depot at Billingshurst is purpose-built with excellent sales and workshop facilities as well as secure storage for new and used

machines. Agco Fendt and Valtra brands are offered from the location along with Amazone, Spearhead, HM Trailers, plus new franchise Vaderstad. The new territory extends from East Sussex to the M3 in the west and from the south coast it reaches greater London following the M25 into Essex.

Customer loyalty “From when the company started in 1980 it’s been built on great service and that’s something we plan to continue,” explained managing director, Wes Crawford. “Our new depot at Billingshurst is centrally located in the new operating area, ensuring we can offer the very best

back-up to customers and support our full range of premium brands. “The new trading area is a natural fit with our existing areas, and we have a team of trained mobile technicians based at Billinghsurst already, with additional back-up from our Essex and Kent depot teams also available when needed to minimise machine downtime. "As a company we are focussed on preventative maintenance and almost every machine sold is backed by an extended warranty. We also offer a range of service packages allowing customers to budget accurately for cost of ownership which also provides peace of mind that machines are serviced on time,

Vaderstad southern area territory sales manager, Simon Griffiths emphasised that RW Crawford’s representation of the brand is good news for customers. “We are very pleased to be working with a dealer so keen to get to grips with a sales area where there is so much potential for our products. Already since the open day we have had sales enquiries for our Carrier cultivator with CrossCutter Discs, our Rapid drills and TopDown multi-purpose heavy cultivators,” he said.

First Fendt Local farmer and open day visitor Andy Kirby placed the depot’s first order for a Fendt tractor. Trading as AK Kirby, the land is a mix of tenanted and contract farmed, and mainly arable, also including 120 Angus beef cattle. “We knew nothing about RW Crawford until we were told by Agco that the dealer was taking on our area. We have used Fendt tractors for many years and, for

102 www.farmersguide.co.uk July 2019

94-105 July.indd 102

25/06/2019 16:04

Machinery

With Valtra tractors on show are (l-r) Tom Everall, Tom Duffell, Tom Carter, RW Crawford area sales manager James Childs and Simon Carter.

Hampshire farmer Ian Kirby (centre) bought the first Fendt tractor sold by the dealer in its new operating area and is pictured with new RW Crawford area sales manager Philip Cole (left) and aftersales director Malcolm Baker.

RW Crawford managing director Wes Crawford says his team is looking forward to offering the same service to farmers in Hampshire and Sussex which has earned strong customer loyalty in its current trading areas. Pictured are (l-r) Fendt’s Andy Davies, Agco’s Phil Bolton, farmer Steven Gregory, Agco’s Steven Lumby and Wes Crawford. (l-r) RW Crawford Sussex service manager Rob Beddoe is pictured with farmers Andrew Gaird and Rick Clayton.

NEWLY APPOINTED Wes Crawford said those attending the depot opening made the most of the opportunity to inspect the brands and machinery on offer and to discuss their requirements with the sales and service teams.

our new tractor, had been looking at other dealers further afield and even considering other brands. On meeting Wes Crawford we found him easy to deal with and his positive attitude gave us confidence, so we ordered the new Fendt. “It’s a new relationship but during the past three months the dealer seems to have hit the ground running. It’s a big space to fill but I think the dealer will succeed.”

Positive reception Wes said early feedback from potential customers had been extremely positive regarding the company’s appointment in the new trading area. “It’s been well received and as well as taking on the repair

and service of machinery supplied by the previous dealer, we are receiving enquiries from customers new to our brands. This gives us a great opportunity to let them know about our additional franchises and great service. "From the new Ideal combine to Katana forage harvesters and Fendt crawlers and sprayers, much of the machinery we supply is quite specialist and has to perform reliably with minimum downtime for repairs and servicing. We have made a significant investment to ensure facilities and a great team are in place at Billingshurst to offer the same service which has earned strong customer loyalty in our other trading areas.” ■

VÄDERSTAD DEALER! AVAILABLE FROM OUR BILLINGSHURST BRANCH

NEW BRIDGE ROAD, BILLINGSHURST, WEST SUSSEX, RH14 9HZ

01403 330030

July 2019 www.farmersguide.co.uk 103

94-105 July.indd 103

24/06/2019 15:04

Versatile, compact and comfortable Three new tractors have been added to the MF 3700 AL series by Massey Ferguson. With a choice of 75hp, 85hp or 95hp the compact models are designed to combine stability and comfort with a high specification for those working in hilly terrain. The 3700 series was introduced in 2017. The new AL models come with a choice of a standard wide, flat-floor or a tunnel cab option, which can reduce the overall height down to less than 2.44m. Coupled with the superb manoeuvrability, this ensures they offer easy access to work inside and around traditional farm buildings says Massey Ferguson. These AL models, which sit between the existing MF 3700 VSF range and the MF 4700 Series, are built on a longer and wide chassis. Equipped to a high specification as standard, there is also a wide range of options to enable owners to configure and tailor their tractor to their specific needs.

Massey Ferguson’s new 3700 AL series.

With their compact dimensions, wide, comfortable cab and high standard specification the MF 3700 AL tractors are well suited to loader work and duties around busy dairy and livestock units. At the same time their big tractor features in a light, compact frame, make them ideal general workhorses for a wide range of fieldwork from grassland operations to drilling, spraying and spreading. A new chassis, with rear track widths from 1,150mm to 1,908mm on a 2,156mm long wheelbase, allows the fitment of R30 (30in) tyres to provide greater stability. These tractors are true mountaineers, able to negotiate difficult terrain, hills and slopes with ease, hence why the company named them the AL an abbreviation of ‘Alpine’ series. At 1.4m wide, the new comfortable cab is 20cm wider than that of the existing MF 3700 VSF models and is

available in two formats. Equipped with the flat floor the cab height is 2.53m on 16.9 R30 tyres. Selecting the tunnel version reduces that to 2.44m on the same tyres. Inside, operators will find a light and airy workplace with a pneumatic suspension seat. Among the many options are air-conditioning, USB port, DAB/Bluetooth radio and electric mirror de-icing and adjustment. All MF 3700 AL models are equipped with Massey Ferguson’s 24/12 PowerShuttle transmission, which comes with SpeedShift – a twospeed powershift. Comprehensive

transmission and hydraulic control is also provided by the multifunction joystick. Power for all models is delivered by a straightforward 3.4-litre, 4-cyl engine, which does not require the addition of AdBlue with running costs further reduced by its 600hr service intervals. Its strong chassis and 3t capacity, electronically operated three-point linkage make the MF 3700 AL Series strong in-field performers. A 540/540E PTO is standard, while a number of options make it suitable to power a range of implements, including those requiring a ground-speed PTO. ■

operations, the new facility will carry a large stockholding to protect our supply chains through periods of peak demand for parts and whole goods. Alpego has recently appointed

new dealers in Scotland and Wales to strengthen the company’s position in these areas and to facilitate the further future growth anticipated by the company. ■

New UK company for Italian manufacturer Italian cultivation and drilling equipment manufacturer, Alpego Spa, has taken direct control of its operations in the UK and Ireland with the launch of a new company, Alpego UK. The new company will assume responsibility for import, distribution through Alpego’s dealer network, service and parts support with immediate effect. “The change in our UK business structure is a natural evolution in our growth strategy,” said Nicola Pegoraro, CEO for Alpego Spa and Alpego UK. “It will facilitate much closer relationships with our growing dealer network and customer base, enabling us to respond faster and more efficiently to their needs and to the challenges that lie

Nicola Pegoraro, CEO, (left) and Vincenzo Del Ninno, sales director, pictured outside Alpego UK’s new premises in Boston, Lincolnshire.

ahead in a changing and increasingly competitive market. “Crucially, the new company, wholly owned by Alpego, also provides the platform for an ambitious investment programme,” said Mr Pegoraro. “We have acquired new premises for the company in Fen Road, Frampton Fen, Boston, Lincolnshire and the staff have already moved in. It is a large, modern facility complete with workshops and warehousing for parts and whole goods for on-time supply to Alpego UK’s growing dealer network and customer base. “As the hub for our UK and Ireland

WANTED...

■ We are looking to Purchase Cricket Bat Willow Trees ■ Minimum of 5 trees – Excellent prices paid! ■ Extraction & clearance is all included ■ Free re-planting of replacement young trees Call Geoff Watling on:

01245 349811 or 07974 575431 Email: gwatling@anglianwillow.co.uk

5 GENERATIONS OF EXPERTISE

62642

ANGLIAN WILLOW SERVICE LTD

01473 327596 or email: enquiries@collins-skiphire.co.uk

66284

104 www.farmersguide.co.uk July 2019

94-105 July.indd 104

24/06/2019 16:14

News Principle dealership announcement

Successful open event for Cefetra Agricultural specialist Cefetra recently hosted a successful open event at its Chilton grain store near Sudbury, Suffolk to give customers a guided tour around the newlyacquired premises. Acquisition of the store took place in June 2018 when Cefetra signed a long-term lease for the full management and operation of the store and all its facilities. With a 45,000t capacity, Cefetra’s open event enabled customers to see the facility’s main stores and silos close up and witness how they enhance the services that Cefetra currently offers to both its farmer suppliers and customers in the area. Cefetra farm grain origination manager, Simon Wilcox said: “We’re extremely proud of this facility and the role it will play in supporting the farming community in the region. Investment in the future of grain

production is extremely important to us and we wanted to be able to showcase all of the activities, and show the investment already made in the site and in particular the new laboratory.” The close proximity of Cefetra’s new weighbridge and laboratory ensures a quick turn-around time on samples and reduced waiting time. The laboratory has a range of equipment to carry out full testing including moisture, bushel weight, nitrogen, germination and Hagberg (as required). For harvest, Cefetra is also introducing a fully automotive weighbridge system. This will provide relevant information based on the fixing number given and produce a printed weighbridge ticket on exit – streamlining the intake process meaning less waiting times for lorries and tractors. ■

Deutz-Fahr area service manager - Eastern region, James Ellis (left) and Brad Farm Machinery’s managing director Phil Bryce.

German manufacturer Deutz Fahr has appointed Brad Farm Machinery the principle dealership for Suffolk, south Norfolk and north Essex. Deutz Fahr was established in 1864 and in 2017 invested 90m euros to create its tractor plant, Deutz-Fahr Land in Lauingen. Brad Farm Machinery

announced the news with the inclusion of two Deutz-Fahr tractors and an Agrokid 230 on its stand at the Suffolk Show. The company will have two demonstration tractors and three stock tractors, and will be offering viewings and test opportunities for any potential customers. ■

6 SERIES 156 - 226HP. FOR EVERYTHING YOU NEED TO DO.

6 Series - POWERSHIFT - RCSHIFT - TTV The new 6 Series is a range of 4 and 6 cylinder models from 156 to 226hp, with a series of transmissions to suit every application and budget. POWERSHIFT - manual gearshift, RCSHIFT - fully automatic and TTV - infinitely variable: all transmissions have been designed with the operator in mind - easy to operate, simple to programme and a pleasure to drive. For more information on the entire Deutz-Fahr range and the current 0% Retail Finance options call Brad Farm Machinery on 01473 827060

www.bradfarm.co.uk sales@ sales@bradfarm.co.uk

94-105 July.indd 105

deutz-fahr.com DEUTZ-FAHR is a brand of

24/06/2019 16:15

New Farmers Guide AD_Layout 1 14/06/2019 08:36 Page 1

BFS liquid fertilisers: now is the time Start planning now for your switch to more productive, more efficient and more environmentally-friendly liquid fertilisers, and become a ‘one man, one machine’ crop operation by the start of next season. Speak to BFS Fertiliser Services today about their proven and bespoke products and their acclaimed and unrivalled service.

“BFS is one of the most innovative companies in this field.” Contact BFS for more information: BFS Fertiliser Services Ltd T 01245 325849 E info@bfsfertiliserservices.uk www.bfsfertiliserservices.uk

UK’sming Li No.1roduct on p recti or for cof soil ity acid

For ultimate performance Optimises soil pH Increases available calcium Fast acting and long lasting Provides valuable nutrients Improves soil structure Flexible service options

Helpdesk 0800 090 2376 limex@britishsugar.com limex.co.uk

LimeX is a business of British Sugar plc

Glasson Fertilisers is a national manufacturer and distributor of fertiliser, we have one of the widest ranges of fertiliser products and related services on the market. Key to our strategy is a continuous programme of innovation and product development aimed at improving nutrient efficiency and farmer returns on fertiliser. Our fertilisers are manufactured at state of the art facilities at our four production sites. At Glasson Grain we understand the economics of crop production and the vital importance of safeguarding your crop against pests and diseases. We also appreciate the need to minimise production costs and give you the best possible return on investment. We aim to offer impartial advice and the best value product range possible.

COST EFFECTIVE CROP PROTECTION in action Fertilisers

Crop Protection

Contacts: • Fertiliser 01524 753600 • Crop Protection 01524 753606 Glasson Grain Ltd West Quay Glasson Dock Lancaster LA2 0DB Tel: 01524 752200 Fax: 01524 751603 Email: info@glassongrain.co.uk

www.glassongrain.co.uk 66283

106 www.farmersguide.co.uk July 2019

Fertilisers.indd 106

21/06/2019 16:26

Fertilisers, Spreaders & Applicators

Power on the land Design features to increase distribution accuracy as well as bigger hopper capacities to boost output are available in the latest batch of tractor-mounted and trailed fertiliser spreaders. Mike Williams reports. contents to maintain the correct application rate. The Easytronic options also include a border control spreading adjustment, and variable application rate control technology can be added by using GPS and an Isobus link.

Flagship model Amazone’s SG-TS 10001 ProfisPlus trailed spreader has a 10,000-litre hopper capacity.

Amazone has been making fertiliser spreaders for more than 100 years and its production total is now well over the 1m mark with both mounted and trailed models currently available. The range includes the ZA-TS series twin disc mounted spreaders offering hopper capacities from 1,400– 4,200 litres and a 54m maximum spreading width. The list of TS features includes a weighing system with twin cells plus an inclinometer, there is an electrically operated agitation system for the hopper contents and the unique AutoTS border spreading control provides a sharply defined cut-off point. A new development introduced last year on TS series spreaders is WindControl with an anemometer to check the wind speed and direction. The data is used to adjust the spreading action from each disc to compensate for the wind affect, and an automatic warning signal tells the operator when the wind strength is too strong for the compensation system.

British-made The single and twin disc XT series models are made at the Teagle Machinery factory in Cornwall and are the only tractor-mounted spreaders currently made in the UK. Designed mainly for use on small to medium acreages, they are available with hopper capacities ranging from 234–1,350 litres and the maximum spread width is 12m. Teagle also offers the Centerliner spreaders made by Tulip Industries in Holland. These include the recently introduced SXe and SXi models available with hopper capacities up to 3,650 litres and equipped with the Easytronic spread control technology. Easytronic automatically adjusts the spread rate to compensate for variations in travel speed, and the SXi models are also equipped with a pair of weigh cells that constantly check the hopper

Centerliner SXe and SXi series spreaders with speed monitoring technology are a recent addition to the Teagle range.

The tractor-mounted Axis series twin-disc spreaders from Kuhn Farm Machinery are available with hopper capacities from 1,000 litres, and they include the recently introduced flagship 50.2 model with a 4,200-litre maximum hopper capacity and up to 50m spreading width. Special Axis features include spreading pallets with a wear resistant coating, and the fertiliser flow rate is controlled automatically by the Kuhn Electronic Mass Control or EMC feature. EMC constantly measures the drive torque to both spreading discs, and this information is used to regulate the flow rate needed to maintain the required application rate.

The recently introduced Axis 50.2 twin disc spreader from Kuhn has up to 4,200 litres hopper capacity.

As well as a comprehensive range of mounted spreaders, Kuhn also offers high capacity trailed versions including three models in the AGT series with the spreading action through a full width boom. All the AGT spreaders have a 6,300-litre hopper capacity, and using boom application aims to boost distribution accuracy by minimising exposure to wind while offering even distribution across the full bout width with all types of fertiliser.

Fertiliser and lime There are eight trailed models in the Agri-Spread range of fertiliser and lime spreaders, as well as truck-mounted self-propelled versions. Hopper capacities for the trailed models range from 3.2– 14.6m3, equivalent to 4.5–20.4t when level loaded with lime. The 6 models up to 10.6m3 capacity have single axles, and the tandem axles on the top two spreaders can be equipped with a steering option. The top 6 models have a sprung drawbar and air brakes are offered as an option. All new spreaders are supplied with a user-friendly test kit including a set of 13 trays to check the spreading accuracy and the options list also includes a GPS link for variable spread rate control. Agri-Spread is based in Ireland where the company was established in 2006, and its spreaders

are available throughout the UK. As well as fertiliser and lime they can also be used for spreading a wide range of materials including composted waste and poultry litter.

Application kit supplier Last year was the 70th anniversary of Billericay Farm Services or BFS, the Essex based company that started as a farm contracting service but grew to become an international supplier of application equipment for liquid fertiliser and crop protection chemicals. Major milestones in the development of the BFS equipment range include its first dribble bar applicator which was originally designed for use in the liquid fertiliser spreaders operated by its own contracting service. An improved version of the dribble bar with a new application rate adjustment feature won ‘Best New Product Award’ at the 2005 Lamma event. Other BFS application equipment successes include the first air inclusion jets into the market, called Air Bubble Jets, introduced in 1990 to minimise spray drift. The current range of BFS Air Bubble Jets are offered in 10 versions covering application rates to suit any required volume. Many of the nozzles have achieved a LERAP 3-star rating. BFS has a more recent introduction to its Low Drift range; BFS ExRay XC nozzles. Some of these achieve over 90 per cent drift reduction and were the first to be listed on the new 4* LERAP rated equipment list on the CRD website. The company says that it is continuing to research further concepts in the ultra low drift jet market. The BFS FlowCheck nozzle checking device, announced in 2016, is designed to simplify nozzle output measurement by replacing the traditional stopwatch and measuring jug process. A simple visual check shows if a jet is within the 10 per cent tolerance of the stated output, at 3 bar pressure.

Crop nutrition Using organic materials including livestock manures efficiently can make a major contribution to crop nutrition, reducing or in some cases completely replacing purchased fertilisers. The Vogelsang company has a long history of developing specialised equipment for managing liquid manures from livestock units, including the original version of its elastomer coated rotary lobe pump introduced in 1970. Current versions of the pump are a popular choice on farm slurry tankers and are also used for a wide range of industrial applications. Vogelsang’s slurry equipment also includes shredders and macerators for homogenising the liquid to avoid blockages and assist even application. Vogelsang technology is also prominent in liquid manure application equipment, offering a range of spreaders and distributors that help to maximise crop benefits while reducing wind interference. The company was among the pioneers of dribble bar development and the equipment range also includes trailing shoe applicators, strip tillage systems and incorporation equipment that can be used with cultivators and harrows on arable land. ■ July 2019 www.farmersguide.co.uk 107

Fertilisers.indd 107

23/06/2019 19:16

PRECISE AND EFFICIENT

SPREADING TECHNOLOGY Dribble bar systems from Vogelsang are well-known for their nutrient-efficient, ground-level application with the highest distribution accuracy. This is only possible because of robust frame structures, variable management of part-width sections and an optimised hose layout. Vogelsang’s dribble bar systems also provide innovative customised solutions and include the most reliable and compact precision distributors with a coefficient of variation less than 5 percent. vogelsang.info

ENGINEERED TO WORK

180130 product advert agriculture 188x132mm EN 3001.indd 1

65129 05.02.18 12:07

66205

ALL GRADES OF AGRICULTURAL CHALK AND LIMESTONE COMPLETE GPS VRA SOIL ANALYSIS AND SPREADING SERVICE ALSO AVAILABLE FIBROPHOS GRADES OF: 0-12-12 / 0-9-18 / 0-12-18 0-5-16 / 0-0-16 P-GROW 0-23-0 / 0-18-9 PKUP 0-23-0

Trailed Fertiliser & Lime Spreaders

• Single & Tandem Axle 3 ton to 25 ton Models • Ground & Hydraulic Drive Options – no PTO • ISOBUS Compatibility • GPS Auto Swath & Section Control • Single & Double Floor Belt Models • Load Cells

www.needhamchalks.co.uk 01449 720227

FOR MORE INFORMATION CONTACT:

UK – Dales Agri Sales Agency Robert Taylor: 07967 808 285 sales.dalesagri@btconnect.com Ireland/Worldwide – Terry Reilly T: +353 89409 1989 E: terry@agrispread.com

www.agrispread.com 108 www.farmersguide.co.uk July 2019

Fertilisers.indd 108

21/06/2019 16:27

Fertilisers, Spreaders & Applicators

Low pH will compromise yield and quality The October 2018 report on nutrient management planning and practices for the Professional Nutrient Management Group (PNMG) concluded that the use of lime could be improved, says British Sugar. The report stated that lime use has decreased steadily and in 2016/17 the amount applied was around half the estimated annual loss from soils of 4.25mt CaCO3. In fact, the use of liming materials in Great Britain has decreased over the past two decades at an average rate of around 86,000t/year, to just over 2mt. Furthermore, data collected via the 2017 PAAG survey showed that 53 per cent of grassland and 16 per cent of arable land soil samples tested at, or below pH 6.0. The five year average data from the British Survey of Fertiliser Practice (BSFP) demonstrates continued low levels of liming in both arable and grassland rotations, as shown in Table 1.

Quality standard Launched by ALA, the Aglime Quality Standard exists to provide farmers and advisers with product quality information for participating suppliers. Be aware that not all ag-lime materials meet the required standards, points out British Sugar. To be sure, the company says that growers should ask for more than just the neutralising value (NV) – it is vital that you know what per

centage passes the 150 micron sieve, and what the reactivity performance level is. A quality lime should have at least 40 per cent passing 150 micron, with at least 70 per cent reactivity. NV combined with fineness drives the reactivity and, with it, rate and extent of pH change and potential longevity. According to British Sugar, LimeX offers an unrivalled minimum 85 per cent passing 150 micron sieve and 95 per cent reactivity. This delivers fast but lasting pH correction in arable and grassland rotations and may be used in organic farming systems. The integral nutrient package within LimeX contributes to maintaining soil fertility and increases available calcium. A ‘maintenance’ application of LimeX70 at 7.5/t ha will also supply a minimum of: • 75kg P2O5 • 50kg MgO • 45kg SO3 (typically worth c.£80/ha) LimeX meets all quality criteria of the Aglime Quality Standard, and is available to order now for summer and autumn 2019. British Sugar says that following major investment, the Cantley factory, Norfolk is pleased to offer LimeX70 from the start of the 2019/20 campaign, joining Bury St Edmunds, Newark and Wissington in the nationwide supply of over 300,000t of LimeX per annum.

Table 1: BSFP survey data showing average national lime use by rotation (% of land). Year

2013 2014 2015 2016 2017 5yr avg

All tillage

7.4

8.7

8.0

6.4

8.4

7.8

All grass

3.0

4.0

3.1

3.2

2.9

3.2

The 5-year averages are equivalent to liming grassland on a 31-year cycle and arable land on a 13-year cycle – however, this will not sustain pH or yield and profitability, says British Sugar.

Table 2: The impact of low pH on macronutrient efficiency. Nutrient efficiency (utilisation) Soil pH

4.5

30%

23%

33%

5.0

53%

34%

52%

5.5

77%

48%

77%

6.0

89%

52%

100%

7.0

100%

Source: Efficient Fertiliser Use Manual – pH

Routine rotational soil pH testing is required to ensure an effective liming policy is in place to avoid consequential loss of yield and quality by maintaining pH at an appropriate level for the rotation.

-Beet

Sugar beet fertilisers with unique ingredients Prescription range of fertilisers designed for high-yielding, highquality sugar beet crops. Made in Great Yarmouth from unique ingredients.

Wolf Trax(R) Magnesia-Kainit(R) Polysulphate(TM) Available in bags, bulk or delivered and spread

Advanced nutrition for enhanced performance

t:03333 239 230 e:enquiries@originfertilisers.co.uk www.originfertilisers.co.uk

@originfert

July 2019 www.farmersguide.co.uk 109

Fertilisers.indd 109

23/06/2019 19:17

Fe Plan your switch to liquid fertilisers now Now is the ideal time to start planning for a future with liquid fertilisers according to BFS. Fertiliser Services. Liquid fertilisers are applied with greater precision than is possible with solids, while today’s wide booms save manpower and time – essential in short weather windows – and minimise wheel damage, it says. They are also easily transportable, and kept in tanks, meaning that switching to liquid fertiliser can release storage space for more profitable use. Making a fundamental change in farming practice is a big decision for any farm, so it is essential to get it right, says BFS. This means choosing a supplier which can accommodate farmers’ individual demands, particularly as liquid fertiliser is

usually delivered in the spring, during its period of use, when there is no room for error, it adds. Service is key to maximising the benefits that liquid fertilisers bring and BFS products can also achieve unparalleled results, it says. Solutions are uniquely prepared and are more concentrated to allow farmers to reduce their application rates. For example, BFS NitroSulph, a nitrogensulphur product, is individually prepared to suit customers’ specific requirements. Common grades include 30-0-0-6, 30-0-0-10 and 24-0-0-24. Farmers considering switching to liquid fertiliser are invited to discuss their individual requirements with BFS which operates in the south east and south west of the country. ■

Niche product becomes mainstream

Take Control of Nitrogen & Sulphur with YaraBela AXAN TM

• Ammonia emissions are half that of urea plus inhibitor* • Added sulphur – boost yield by up to 2t/ha • Accurate and even spreading up to 54m All Yara Area Managers are FACTS trained

Summer 2019 Special Offer 3 free tissue tests with every full load of YaraBela AXAN Search ‘Yara Rewards’ T&Cs apply** * DEFRA, NT2605 ** Full load = 28 tonnes. Proof of purchase must be uploaded to Yara Rewards to claim. Limited time only.

@Yara_UK Yara UK

www

www.yara.co.uk

agronomy.uk@yara.com

Since their introduction more than 25 years ago the Fibrophos range of basal ash fertilisers has become increasingly popular on farms across the UK. Needham Chalks is the main supplier in eastern England and says that what were initially regarded as niche products on farm, have now become mainstream. Record sales by the company during 2018 confirm that many farms are looking to these products as their first choice for their applications of phosphate, potash and other essential nutrients. Needham states that the reason for growth of the sales of these products is the value for money compared to the rising cost of traditional bagged products coupled with proven efficacy on farm. Derived from sustainable sources such as incinerated poultry litter they are blended to Balanced, High K and High P analyses to suit differing soil types and crops and are applied mainly on a delivered

and spread basis by approved contractors. Valuable magnesium, sulphur, calcium and trace elements supplement the PK input, so although Fibrophos is competitive on its P and K value alone, the additional elements add around £35/t worth for no extra cost. At approximately half the unit cost of traditional straight phosphate, demand on-farm for P-Grow (23% P2O5) has been increasing. It is also highly efficient providing phosphate in an available form as the crop needs it, says Needham, enabling growers to build and maintain their P indices. Needham chalks has also seen great demand for Fibrophos 0-0-16 (16%K2O), a straight potash grade, again with the benefit of additional nutrients. With many contractors’ spreaders now having variable rate capability, both P-Grow (23% P2O5) and Fibrophos 0-0-16 can be spread variably via GPS thus giving farms flexibility for nutrient planning. ■

Hanslope Ltd For all your Chalk and Limestone needs

A complete service from testing to spreading Making your soil work harder for you

Contact Paul Bowling 01502 726032/07799 890983 66249

paul@hanslopeltd.co.uk

110 www.farmersguide.co.uk July 2019

Fertilisers.indd 110

24/06/2019 15:08

Fertilisers, Spreaders & Applicators New biostimulant seed treatments New biostimulant seed treatments could help growers increase cereal yields by improving nutrient and water uptake through better rooting, said Bayer. “Getting cereal crops off to the best possible start is a key New biostimulant seed treatments could help growers increase first step in setting cereal yields by improving nutrient and water uptake through yield potential,” better rooting. commented the company’s campaign manager for so phosphate can be taken up by the seed treatments, Claire Matthewman. plant. “Single purpose seed treatments, “Effectively we are jump starting such as Redigo Pro, are an essential the crop by helping to make protection against damaging soilphosphate more available,” she and seed-borne diseases, such as explained. “But at the same time we loose smut, bunt and leaf stripe.” also need to address that phosphate But Bayer, through its doesn’t move in the soil, so roots are collaboration with Novozymes, only able to take up phosphate in the has also been researching ways immediate root zone.” of helping crops establish a more That’s where the second effective rooting system using biostimulant product, ProStablish WT biostimulant seed treatments, she comes in, which is co-applied with explains. JumpStart and a single purpose seed One area of key interest is how treatment. to improve phosphate availability. “ProStablish WT is a messenger or Phosphate becomes bound to signal compound, which stimulates cations, such as calcium, iron, mycorrhizae fungi to germinate and manganese or aluminium, in the colonise roots,” Mrs Matthewman soil depending on soil pH, while explained. availability to plants also reduces “By applying the combination in lower soil temperatures and soil of JumpStart and ProStablish WT, moistures. “In some situations, up to we’re both making phosphate more 90 per cent per cent of phosphate available to be taken up by the roots fertiliser can be unavailable to and making it easier for the crop crops in the year it is applied,” Mrs to access it, which results in both Matthewman said. better nutrient and water uptake and a more effective root system.” In trials across Europe results Naturally occurring have revealed a 3 per cent yield The active ingredient of the new improvement from the ProStablish product, JumpStart WT, is a naturally WT and JumpStart WT cooccurring soil fungus, penicillium application with a single purpose bilaiae, which produces organic seed treatment (SPD) over the SPD compounds that break the bonds ■ between phosphates and the cations, alone, she added.

News

Barn-filling barley adds weight to hybrid quality A new hybrid winter feed barley that has given consistently high yields over the past three seasons, as well as delivering added grain quality, is being launched to UK growers for this autumn. SY Kingsbarn is the newest in the line-up of Hyvido hybrids from breeder Syngenta. Delivering a UK treated yield of 10.7 t/ha on the 2019/20 AHDB Recommended List, 1% above the popular hybrid Bazooka, it adds to the trend seen among hybrid barleys over recent years, of higher yields combined with improved grain specific weight. “At 69.9kg/hl, the specific weight of SY Kingsbarn is around 1kg/ hl above Bazooka,” says Syngenta marketing manager for hybrid barley, Mark Bullen. “Its grain quality is further underlined by a lack of small grains: SY Kingsbarn has the lowest screenings figures of any six-row barley on the AHDB Recommended List. “Concerns about grain quality used to put some growers off six-row barley, but the average specific weight of hybrids on the AHDB Recommended List has increased over the last 16 seasons. It’s now at the point where it equals the average for conventional two-row feed barleys,” he adds. This combination of improved quality and yield, coupled with other timely hybrid benefits – such as providing another crop in rotations

for the three-crop rule; providing an early harvest as an entry for winter oilseed rape; and providing a vigorous crop to compete against black-grass – have fuelled a rise in the popularity of hybrid barley, believes Mr Bullen. Roughly 1 in 3 winter feed barley fields in the UK is now in a hybrid, he says, and nearly 30 per cent of winter barleys on the AHDB Recommended List are now hybrids. “Another important feature of SY Kingsbarn is the consistency of its high yields,” adds Mr Bullen. “As a percentage of control varieties, its annual treated yield on the AHDB Recommended List has only varied by 1 per cent over the last three seasons. Reliable yields are important with volatile grain prices. “Agronomically, SY Kingsbarn also offers good all-round disease resistance, which is reflected in its high untreated yield. Plus, it has good standing power: it has an 8 rating for lodging resistance on the AHDB Recommended List.” To help growers choose between popular hybrids, Mr Bullen believes Bazooka will appeal most to growers looking to stick with a tried and tested hybrid, while SY Kingsbarn will appeal to those looking to try something new that offers a step upwards. The hybrid, Belmont, launched last year, is for growers looking for even higher UK treated yield potential and prepared to manage it accordingly, he adds. ■

Paul W Hanton Fertiliser and Lime Spreading Contractor using 10 tonne KRM Spreader fitted with GPS guidance GPS variable rate lime spreading 12-24 metre spreading on flotation tyres Saltbased blends Kainit Fibrophos NPK Lime Limex 70 Bulk or bags 66285

PROFESSIONAL & FRIENDLY SERVICE

✆ Attleborough

01953 454395 Mobile:

07860 721041 Email: paulwhanton@gmail.com

SY Kingsbarn is the newest in the line-up of Hyvido hybrids from breeder Syngenta.

July 2019 www.farmersguide.co.uk 111

Fertilisers.indd 111

26/06/2019 09:44

News

Dealer appointment for Cornwall and Devon A Horsch Pronto-NT drill.

Horsch will be partnering with Hamblys’ dealer network to provide its range of cultivators, drills and sprayers to customers in Cornwall and Devon. “I am very pleased to announce that from 1st June 2019, Hamblys has become the official dealer and from 1st October we will have a trading area mirroring the current Claas trading boundaries,” said Hamblys sales director, Steve Perryman. Hamblys has five dealerships at Launceston and Redruth in Cornwall, Honiton and Torrington

in Devon, and Bishops Lydeard in Somerset. “Hamblys has an outstanding reputation for aftersales care and support and we’re delighted to be working with them,” said Horsch UK general manager, Stephen Burcham. Mr Perryman added: “We believe Horsch drills and its tillage range of equipment will strengthen Hamblys offer in this sector, particularly the Horsch Leeb trailed and self-propelled sprayers which are recognised as market leaders in the UK.” ■

Your new name for a tractor Case IH has decided to rebrand its award-winning 100–130hp tractors with CVXDrive transmission. The new name is Case IH Vestrum CVXDrive. “We chose the name Vestrum because it means ‘yours’ in Latin,” says Case IH marketing director Europe, Peter Friis. “This tractor is dedicated to our customers who need a powerful and comfortable tractor to accomplish more throughout the varied tasks in their day.” The rebrand will not affect any other features of the 100–130hp models, which all have the Case IH CVXDrive continuously-variable

transmission as standard. The new range was launched at February’s SIMA show in Paris, where it won the Machine of the Year 2019 award in the mid-class tractor category. “We would like to reassure our customers that no other aspect of the tractor will change – all specifications remain the same as at the launch – and deliveries within 2019 will not be affected,” said vicepresident Case IH Europe, Thierry Panadero. “We will continue our launch activities and look forward to meeting our customers in the field and at shows in the coming months and present these fantastic tractors.” ■

Case IH has rebranded its 100–130hp tractors.

Time for an upgrade?

Buy & Sell online for FREE with www.FarmAds.co.uk Farmers Guide

112 www.farmersguide.co.uk July 2019

Fertilisers.indd 112

25/06/2019 12:12

FOR HIRE MT 765C•95E•85E•75E•55•45&35 all models in stock and available

Available with... GPS Guidance Creep Speed Transmissions Front Linkages Hydraulic Pick Up Hitches

THE LARGEST FLEET OF CHALLENGER TRACKED TRACTORS IN EUROPE all covered by our 24/7 backup service

Hire by the hour, week, month or year – it's your choice

Ian Houlgrave

65432

Tel: 01507 466352 Mobile: 0780 134 3023 Fax: 01507 462812 Email: ian@ianhoulgrave.com

MOULTON BALE GRABS

F8BB BALE GRAB A bale grab designed to work with both flat eight bale packs, or two 80cm wide high density bales Heavy duty all box section construction, fitted with large drop forged tines, for excellent grip even in loose bales The grab is supplied with an adjustable side gathering bar, this can be fitted to either side of the grab, for ease of operation Specification: Overall length ......... 220cm Overall width .......... 170cm Weight without brackets .................. 350kg Fitted with a double acting hydraulic cylinder, this requires one double acting service

Smisby Road, Ashby de la Zouch, Leicestershire LE65 2UE

www.moultonfarmmachinery.co.uk Phone 01530 567040 Fax 01530 412512

M 66170

July 2019 www.farmersguide.co.uk 113

Fertilisers.indd 113

21/06/2019 16:28

The best varieties for the UK: it’s all in the seed.

ADVENA KWS



KORTESSA KWS



SABATINA KWS

Rhizomania varieties

CANTONA KWS Nematode



DAPHNA

Rhizomania and BCN tolerant varieties

PROTECT

PHILINA KWS Rhizomania

AYPR variety

PROTECT 2.0

www.kws-uk.com

Vegetables.indd 114

21/06/2019 16:32

Vegetable & Root Crops

Sugar beet crops under heavy rust pressure A wet and warm start to summer has added to the pressure facing sugar beet crops by creating conditions potentially favourable to rust (uromyces betae), the principal disease threat to crops in recent seasons. Many growers will no doubt still be concerned by the threat posed by virus yellows and the unprecedented numbers of peach potato aphids (myzus persicae), the dominant vector for virus transmission. “Crops are growing well but some are in various stages of development with the most backward just meeting within the row while forward crops met across the row several weeks ahead of the longest day. Add in the virus threat posed by abundant numbers of peach potato aphids and it is clear that many crops are under more pressure from pests and diseases this year,” says British Beet Research Organisation head of science, Dr Mark Stevens (right), adding that the rains in early June will have helped crops move on but have also ensured conditions favourable to disease spread. “Conditions appear to be conducive for rust,” he comments. “Research shows that if crops are to be protected, the first fungicide should be applied at the first signs of disease, typically July, and a second spray applied about four weeks later,” he adds.

Disease considerations With much to ponder, what are the main points growers need to consider if crops are to be suitably protected? First, rust is still the disease to look out for. “The threat posed previously by powdery mildew has not manifested

Low level disease can be hard to spot from distance, so crops should be monitored closely.

for several seasons, except 2018, although rust should be the principal concern. It was late coming in last year, but that doesn’t mean it will be in 2019,” says Dr Stevens. Second, even low-level disease can affect yield. “The impact of lowlevel disease on crop performance continues to be an area of research and the difference in varietal susceptibility, but there is evidence, in some seasons, to suggest that yield potential is already negatively impacted before the point at which symptoms become visible on the plant,” adds Dr Stevens. Third, fungicides are effective in controlling disease, but timing is important. Disease scores from Bayer’s fungicide trials in 2018 at Bracebridge, Lincolnshire and Aspall, Suffolk highlight the importance in application timing. Across the two trials disease in the untreated plots averaged 39 per cent, though this hides the extent of the range which was 17 per cent for the Bracebridge trial assessed on 31 October and 60 per cent for the Aspall trial assessed on 25th September.

Overwhelming evidence The evidence demonstrating the benefits of fungicide protection across contrasting seasons is now overwhelming, says Bayer campaign manager for root crops, Edward Hagues (right). “For the greatest yield protection Escolta (cyproconazole + trifloxystrobin) should be applied at the first signs of

disease and then again about four weeks later.” Where applications of Escolta were well-timed – late July and late August in the case of 2018 – disease control reached 94 per cent, whereas relying on a single application of Escolta in early July meant control slipped to 65 per cent at Bracebridge and 85 per cent at Aspall into the early autumn. “The point to note is that of timing. There is no set date at which Escolta should be applied, rather that it is applied at the first signs of disease. This typically occurs in the

latter half of July, though crops should be monitored from the start of summer in readiness for Escolta to be applied when disease appears. “The advice given to growers over the past six years therefore remains valid and where it is followed it has consistently delivered high levels of yield protection,” says Mr Hagues. While rust was reported in all fields there were also sporadic levels of cercospora leaf spot with the disease found at low levels in Nottinghamshire, Lincolnshire and Cambridgeshire. “As in most historical seasons conditions were largely unfavourable for cercospora leaf spot in 2018, its occurrence not proving damaging to sugar beet crops last year,” he adds. ■ De

Vegetable Machinery Specialists

sig

The Edwards Potato Haulm Pulveriser.

Watch our Potato Haulm Pulveriser in action on our YouTube Channel. See its incredible vacuum, suction at work pulling the haulm from the base of the ridge to mulch all the top for hassle free harvesting.

ita

See our machines working on our YouTube Channel, type in to YouTube “Universal Haulm Pulveriser Edwards Farm Machinery.” Front or rear mounted.

www.edwardsfarmmachinery.com

Office: 01584 810713

Rob: 07710 373822

Richard: 07836 363416

July 2019 www.farmersguide.co.uk 115

Vegetables.indd 115

25/06/2019 14:32

Vegetable & Root Crops New kit worth £500,000 installed as factory extension reaches ‘halfway stage’ The expansion of Scotts Precision Manufacturing’s new factory has reached the halfway point with the installation of £500,000 of equipment. The vegetable harvesting equipment manufacturer has this month taken delivery of a new Street 5t overhead crane, a CNC lathe and press brake with a polyurethane casting machine due to be installed next month into its Slate Worx site near Boston. Building work on the 6,500ft2 extension started in January.

Funded in part by the Rural Development Programme for England LEADER Fund, the development will see Scotts double the size of its factory. “It’s fantastic to take delivery of the crane and have the lathe in position and a new press brake,” says director Derek Scot. “2019 has been an exciting and challenging year so far. We’ve been enjoying unprecedented demand for our Evolution separators and Trinity haulm toppers, which is humbling. “The new factory will give us much needed space and the

new equipment will allow us to increase productivity, introduce new services, such as machining and pressing of steel services and will allow us to bring some more of our manufacturing process in-house. “We’re well on course to achieve our ambitions of having a state-ofthe-art production facility which will allow us to cope with the growing interest our machines are receiving, not just from farmers in

the UK but around the world.” In the past two months, Scotts has delivered machines to growers in Belgium, Holland, Norway, Sweden, North America and Canada and recruited two new people to its team as a result of the increase in demand. ■

Extensions to the Scotts factory near Boston reach the half way stage.

Service department keeps machines running to maximum efficiency The new service department for Haith: Josh Finelli, Chris Walsh, Darren Wilcock, Andrew Elmhirst and Chris Haith.

UK manufacturer of vegetable handling and processing machinery, Haith Group has introduced a new service and maintenance department.

Customers taking out a service agreement for Haith machines or needing help to maintain equipment will be supported by a new team, headed by service director, Chris Haith and Darren Wilcock, service team leader, who is celebrating his 36th year at Haith. Newly appointed service technicians Andrew Elmhirst, Josh Finelli and Michael Hampshire will

work alongside long-term service engineers, Karl Smith, Chris Walsh and Jonathan Oliver. “Hundreds of farmers, growers, food producers and processors rely on our machines as part of their operations and ensuring that they are running to maximum efficiency is crucial,” says Chris. “While we make our machines as easy as possible for people to use, they are intricate and sophisticated pieces of engineering which need to be looked after correctly. Our new service team members have undergone extensive

A family run business established in East Anglia for over 40 years

training so they know each of our machines inside and out and are best placed to ensure the optimum performance of our graders, washers, polishers and tipplers.” As well as working to service schedules, Haith’s team will offer a rapid response service for people needing immediate help with their handling machinery. The new team will be based at Haith’s Doncaster head office but will look after customers across the UK. Annual service packages start from £900. ■

www.rneuston.co.uk

Complete Building Construction including...

66222

Steel framed buildings Complete groundworks Mechanical handling equipment Drive on timber floors Building refurbishment For all enquiries

t: 01449 720256 m: 07774 633608 e: m.euston@sky.com

Wilwyn, Flordon Road, Creeting St Mary Ipswich, Suffolk IP6 8NH

116 www.farmersguide.co.uk July 2019

Vegetables.indd 116

23/06/2019 19:49

Use two sprays for

better, bigger beet yields. At this busy time of year, having a clear and simple beet disease control plan can help protect your crop, maximise your yields and improve your return on investment. When used in a two spray programme, Escolta is proven to increase your yields by 13%*1 (on average) giving you an extra £198.33 / ha*2. To discover how Escolta can support your disease control programme, visit cropscience.bayer.co.uk/escolta

BBRO Sugar beet reference book, 2019. *2 Based on a yield of 80 t/ha at the 2019 minimum beet price of £19.07/t.

Escolta contains cyproconazole and trifloxystrobin. Betanal maxxPro contains desmedipham, phenmedipham, ethofumesate and lenacil. Escolta, Betanal and maxxPro are registered Trade Marks of Bayer. Use plant protection products safely. Always read the label and product information before use. Pay attention to the risk indications and follow the safety precautions on the label. For further information, including contact details, visit www.cropscience.bayer.co.uk or call 0808 1969522. © Bayer CropScience Limited 2019

Vegetables.indd 117

21/06/2019 16:32

Vegetable & Root Crops Onion store project completed A 1,700t onion store has been completed by Bennett & Co for JS Means (Terrington). Due to the nature of the marsh soil conditions piled foundations were required before a large reinforced base slab was constructed on top. The drying floor is a hardwood deep bearer timber floor supplied and constructed by Flach & Leroy, designed specifically for this type of application with the large airflows needed in the first stage of onion drying. The floor is constructed from a double bearer and the stability of the bearers is maintained by lateral

struts along the length of the floor giving an overall height of more than 0.5m. Fans are inverter controlled to keep the starting loads to a minimum and enable the airflow to be closely controlled by the Vegtec controller with crop air speed sensors and air duct pressure sensor. It also controls humidity with Farm Electronics air mixing louvres when drying and with the refrigeration when required for pull down and maintenance of crop temperatures during storage. It can be remotely accessed by GSM modem to a mobile phone or computer. Drying air temperature

The new onion store.

is controlled with a Harvest Installations modulating gas burner. For any new storage projects,

Bennett & Co suggests visiting the project planning pages on its website.

articulated trailers in the field, the Power Dolly is robust and reliable and built to withstand all operations and conditions when harvesting carrots, parsnips, silage, cereals or potatoes. With a minimum 150hp tractortowing requirement, operational speeds range from 0.5–12kph from 12-forward and 6-reverse gears, using 540 and 1,000 PTO speeds

through a heavy-duty mechanical transmission. This, together with flotation tyres, selectable 4wd and diff-lock to both axles means the Power Dolly is truly an “anywhere, anytime tool”, says Bye Engineering. There are currently two units available to hire. For more information on hire or buy, contact Richard on 07534948361 or 01394 386008. ■

■

Hired help available at harvest The Power Dolly from Bye Engineering enables tractors to move articulated trailers in the field.

Designed to assist with bulk harvesting operations, Woodbridge, Suffolk based Bye Engineering has been manufacturing the Power Dolly for over 15 years and, new for this season, it is available for short- and long-term hire, says the company. Enabling tractors to move

WEIGH IT. BAG IT. STACK IT

...and give away as little as 5 grams on a 25 Kg bag. Whatever the state of the potato market, rely on David Harrison to have the handling solutions to meet your needs. From simple Prinsen palletisers to the Symach’s ‘all singing, all dancing’ alternatives and from the incredibly accurate Propak weigher baggers to the tough and reliable SFC stitching line, they will keep your packhouse profitable and, with expert backup, fully operational. And when times are tough Harrison have the UK’s largest stock of used and refurbished potato handling systems.

Tel: 01353 740 666 sales@davidharrisons.com

Fax. 01353 741370

www.davidharrisons.com

118 www.farmersguide.co.uk July 2019

Vegetables.indd 118

25/06/2019 16:08

Brick Kiln Lane, Melton, Woodbridge, Suffolk IP12 2PB

Tel: 01394 386008 Mob: 07534 948361 Fax: 01394 382623 66100

Manufacturers of Specialised Potato Equipment

The BE Power Dolly

Designed to assist with bulk harvesting operations in all weather and soil conditions

WO NO ABLE T

AVAIL

HIRE

● Designed to assist with bulk harvesting operations in all weather conditions ● Robust and reliable, built to withstand all operations and conditions ● 540 and 1000 PTO drive through to a transmission with 12 forward and 6 reverse gears ● Operational speed ranges from 0.5mph (0.8kph) to 12mph (19kph) to suit all operations and conditions ● Choice of tyre size with 550mm ﬂotation as standard ● Selectable 4WD and diff-lock to both axles ● Suit low hp tractor to 400+hp ● In-cab pneumatically operated control box Watch our video www.youtube.com/watch?v=JebELlcwL98

For further information and to secure a demonstration contact:

Richard 07534 948361 • email: richard@byeengineering.co.uk • www.byeengineering.co.uk July 2019 www.farmersguide.co.uk 119

Vegetables.indd 119

21/06/2019 16:33

Vegetable & Root Crops

Weed control spanning over four decades In recent years vegetable, allium, herb and nursery specialist crop growers have lost a number of crop protection actives, either as products are revoked or as they go through re-registration and lose crops and uses. But the classic post-emergence herbicide Dow Shield (clopyralid) has been adding crops to its label as well as adding Extension of Authorisation for Minor Uses (EAMUs). Clopyralid has been on the market for over 40 years and continues to be an important herbicide for the specialist grower. Being registered for over four decades, Dow Shield has exceeded all the necessary registration hurdles for today’s market, including five years ago the launch of a new and improved double strength formulation, Dow Shield 400. Throughout this time it has become an important active ingredient for the control of difficult perennial and annual weeds such as creeping thistles, volunteer potatoes, spear thistle, corn marigold, groundsel, mayweeds and smooth sow-thistle. The more concentrated formulation comes in Corteva’s recognised

advanced packaging with self-seal cap technology with no foil to dispose of, making it easy to handle, optimising tank filling operations and minimising the risk of point source contamination. Dow Shield 400 has 20 different crops on its label including swedes; turnips; mangels; bulb onions; broccoli/calabrese; cabbage; cauliflower; fodder beet; forage maize; linseed; grassland; ornamental plant production and Brussels sprouts, as well as most cereals and oilseed rape. It has over 50 EAMUs including asparagus; garlic; shallots; chard; spinach; spinach beet; Chinese cabbage; choi sum; pak choi; kale; collard; outdoor leafy herbs; borage; miscanthus; hops, outdoor leeks and salad onions plus some fruit crops too.

Application For allium growers Dow Shield 400 should be used from 1st March and when these crops have at least 2-true leaves, but before 6 weeks prior to harvest. Make sure the crop has adequate wax layers, points out Corteva.

Dow Shield 400 has recommendations for most allium crops including bulb onions, salad onions, outdoor leeks, garlic and shallots.

Cabbage, cauliflowers and broccoli can also be treated from the 2-true leaf stage or when well established if transplanted up to 6 weeks before harvest ,and Brussels sprouts between the 2-true leaf stage up to 9-true leaves. Its dose rate is 0.25-litres/ha for annual weeds, 0.5-litres/ha for perennials in a single application or up to 0.75-litres/ha total maximum

dose from two applications in a programmed approach. Peas or beans should not be planted in the same year as the treatment with Dow Shield 400. For any EAMU, growers should obtain a copy of the notice of approval via the Chemicals Regulation Division (CRD) website, ADAS offices or NFU, adds the company. ■

120 www.farmersguide.co.uk July 2019

Vegetables.indd 120

23/06/2019 19:51

Varieties that deliver for

RHIZOMANIA

20 20

CONGER

RHIZOMANIA

PUFFIN

for

20 20

LIGHTNING

for

20 20

RHIZOMANIA

VIXEN

for

20 20

RHIZOMANIA

CAYMAN

SESVANDERHAVE varieties continue to deliver on low bolting, adjusted tonnes and disease resistance for UK Beet growers.

ANIA RHIZOM

Fir st 20 liste 11 d

Y L F E R I F

With 4 new varieties; Lightning, Vixen, Puffin and Conger added to proven favourites Cayman, Hornet and Firefly youâ&#x20AC;&#x2122;re spoilt for choice.

RHIZOMANIA

Firs t 201 listed 6

HORNET Fir st 20 liste 14 d

Vegetables.indd 121

21/06/2019 16:35

BRITISH STRENGTH IN COMBINATION WITH DUTCH FINE-TUNING

PROPANE-GLYCOL REFRIGERATION FOR BOX AND BULK STORES

Sustainable refrigeration equipment

Crop storage equipment for potatoes, onions and carrots

Intelligent climate control accessible by mobile devices

Intelligent climate control

Improving your agribusiness in an intelligent way Contact Alex or Adam on 01476 591592 or info@farmelec.co.uk

www.farmelec.co.uk

FANS MAIN AIR TUNNELS LATERALS DRIVE OVER FLOORS GAS BURNERS GRAIN STIRRERS 66010

Pellcroft Engineering Ltd Coningsby, Lincs LN4 4SE Tel: 01526 342466 Fax: 01526 343507 www.pellcroft.com 122 www.farmersguide.co.uk July 2019

Vegetables.indd 122

21/06/2019 16:36

Vegetable & Root Crops Demand increases for suction ventilation in potato stores With some of the newer potato varieties requiring more positive ventilation, there is an increasing demand for suction ventilation systems in potato box stores, says storage specialist Farm Electronics. Until recently this has required a roll out canvas cover over the suction aisles. While this is an effective solution in terms of air movement, it does come with the increased health and safety risk to personnel carrying out crop inspections, inadvertently stepping on canvas and falling into the aisle. As an alternative to the canvas strip, Farm Electronics is now able to offer an Inflatable Air Bag system, which has been used for many years in Holland. This system is combined

Farm Electronics is now able to supply an Inflatable Air Bag system to offer suction ventilation and greater safety to personnel.

with a suction duct built round the refrigeration plant, which has narrow air return doors aligned with the airbags. This forms a 450mm wide suction aisle between two rows of boxes, enabling air to be sucked back to the cooler through slatted sided boxes. This is just one example of how the partnership between Tolsma-Grisnich and Farm Electronics is being utilised – a hybrid system using a mixture of UK and Dutch equipment, points out the company.

“Farm Electronics is now able to offer this system as an option for UK growers,” commented the company’s technical sales engineer Adam Fryer.

“The system offers improved air movement through the potatoes, increased safety and ease of operation,” he adds. ■

the company is looking forward with its in-house manufacture, and with its own 3d CAD design team it can offer “a complete turnkey project”. “We have approved plans for the building of a new factory for housing a training robot and demonstration area,” he explained. “We have already taken on three more full-

time employees in the fabrication department. We provide a complete range of machines from sack presenters, automatic weighers, PIM multi-head weighers, CBC complete bag control stitcher lines, and our Motoman robot palletising systems. All good reliable equipment now and for the future.” ■

Grant funding assists with future plans Pace Mechanical Handling has invested in new machinery with the help of an EU Leader grant.

An EU Leader grant has enabled Pace Mechanical Handling to invest in a new Pressbrake bending machine and Motoman Robot, for its manufacture of potato handling equipment. Nick Cesare of Pace explained that

Order early and save even more

SEAMLESS INTEGRATION ISOBUS is standard, offering control via your own tractor’s terminal.

SAVE TIME High working speed with precise depth control and fast-folding in just 12 seconds.

on MATRIX Beet Drills

SAVE SEED Section Control and high planting accuracy ensure optimal use of seed.

SAVE MONEY – The earlier you order, the more you can save! This is a limited period offer, ACT NOW and register your interest. Contact DAVID WADSLEY, GRIMME Beet Specialist: MOBILE: 07826 664969 E-MAIL: d.wadsley@grimme.co.uk *Early Order Discounts are valid on orders and payment for new machinery from 01/06/2019–31/08/2019. These offers cannot be combined with any other promotion.

INCREASE YIELD GRIMME Clever Planting is standard and reduces seeding distance adjacent to spray tracks.

% % % Jun

Jul

Aug

July 2019 www.farmersguide.co.uk 123

Vegetables.indd 123

23/06/2019 19:52

Future proof potato machinery Cobra * Gentle handling of your crop. * Robust frame, MONOBODY type. * Easily accessible for maintenance and ease of use.

CDVE * V-shaped conveyor: high capacity and potato friendly. * Robust frame, MONOBODY type. * Easy operation. All info on: www.avr.be or contact your local dealer: T 07818 030552 | E stewartb@peck.co.uk

Take the right route with

 

  Hard Hose Drip for processing potatoes

Single Season for packing quality on the right soil type Solid Set Sprinklers for all occasions 66230

t: 01302 771881 e: info@wrootwater.com

w w w. w r o o t w a t e r. c o m

             



 .01778 342642 e.@.

124 www.farmersguide.co.uk July 2019

Vegetables.indd 124

21/06/2019 16:37

Vegetable & Root Crops Finely chopped potato haulm The potato haulm pulveriser from Edwards Farm Machinery overcomes the need for cross conveyors. The machine’s three stationary knives allow the machine to create a very fine chopped haulm. The haulm will then easily drop through the web and haulm rollers of the harvester. The haulm pulveriser is fitted with 5 vee belts transmitting over 100hp to the rotor. The Haulm Pulveriser from Edwards Farm Machinery.

The machine can be fitted with all long flails for flat beds, or shaped flails for ridged beds. It can also be fitted with deflectors to deflect the haulm away from the ridges. Edwards Farm Machinery has been a specialist in agricultural and horticultural machinery since 1984. The family run business imports, manufactures and custom builds machines to suit customer requirements. ■

1,000th vegetable washer sold Vegetable handling equipment specialist Haith group is celebrating selling its 1,000th vegetable washer. The milestone machine rolled off the production line at the end of last month and is destined for Branston’s Lincoln factory. As well as being the 1,000th vegetable washer to be sold since Haith invented the modern barrel washer in 1961, Branston’s machine is the eighth Haith Supa-Wash to be sold since it was introduced in March 2018. Haith’s barrel washers – the spokeless steel washing barrel – were first introduced in the early 1960s. In

the 1970s Haith produced the brush roller bed, which was superseded in the 1980s by the Hydro Flow washer, with its pump which moved the produce from the barrel. At the beginning of this century, Haith launched the Self Clean washer, a machine that is still operating in food packers and processor factories across the world. The latest Supa-Wash is a step forward in another way too says Haith Group managing director, Nigel Haith. “It is packed with technologically advanced features, such as copper split bearings on the top shaft for easy maintenance, and on the main drive

shaft, a SEW energy efficient shaft mounted barrel drive and externally mounted stainless steel bearings for longer life. “The machine is further enhanced by the presence of a gentle air operated vertical rising crop discharge control gate, a laser cut stainless barrel with slots or holes depending on the produce which will be washed, a full pintle rubber lining inside the barrel and HMI touch screen control with intelligent feedback.” ■ Mark Willcox, technical director at Branston looking at the new washer.

Redefining Agriculture At Agrimech, we’re passionate about machinery automation. That’s why we continuously develop and refine our products and service, to help your business grow.

     WWW.AGRIMECH.CO.UK +44 (0) 1354 638 222

BOX ROTATORS & FORWARD TIPPLERS

66400

K53Z Range is built for yearround demanding rotating tasks

K54 – Europe’s best selling agri box rotator for any handler

Broadwater Machinery Ltd

K80 forward tippler – gentle & quick box tipping. Very adaptable & easy to operate

01728 723221

e: broadwatermach@yahoo.co.uk www.broadwaterltd.com

ROTATING AHEAD IN THE FIELD

AlgifolTM Biostimulant 30 year success story

✓ High resistance against cold, drought and heat ✓ More proﬁt for farmers without extra work ✓ Protection from stress due to Follow us on pest attack Facebook ✓ Stronger rooting & larger & Twitter root mass @mjpsupplies ✓ Rich harvest of excellent quality

Tel: 07702 293 727

Email: marcus@mjpsupplies.co.uk

www.mjpsupplies.co.uk

66306

July 2019 www.farmersguide.co.uk 125

Vegetables.indd 125

24/06/2019 14:24

Vegetable & Root Crops

Innovative product to cut food waste ImpacTrack is a monitoring and logging system which records movement and temperature, and is available with a range of shells which match the dimensions of fresh produce, including strawberries, apples, onions, potatoes and eggs.

A British crop quality monitoring specialist has launched a damage prevention device designed to help solve the problem of food waste worldwide. Martin Lishman has designed and developed a shock and temperature monitor which could help the food industry reduce the damage to

fresh produce during handling and transportation. ImpacTrack is a monitoring and logging system which records movement and temperature, and is available with a range of shells which match the dimensions of fresh produce including strawberries, apples, onions, potatoes and eggs.

By recording and reporting on the journey of fresh produce through handling, packing and transport processes, food producers and hauliers will be able to make informed modifications to their processes to reduce the amount of food which is regularly wasted because of damage such as bruising. Dr Gavin Lishman (right), managing director of Martin Lishman, said: “ImpacTrack can be used to monitor any item as it travels down the production line. Results are transmitted in real time using Bluetooth to the ML Sensing iOS/Android app, to help identify damage sources and improve quality control. “Operators can also use the application to record the journey of

fresh produce during shipping.” In a test by the UK based arm of the Greenyard Group, the technical team was able to record the gravity force their avocado crop was subjected to and any potential bruising this could create. The objective of using the ImpacTrack was to reduce potential wastage created during the grading process and improve material utilisation. Greenyard Fresh UK’s technical manager, Sebastian Janik, said: “Following the results of the ImpacTrack tests we were able to implement modifications to the grading and packing equipment which has reduced the g-force impact to the fruit. “Prior to the implementation of the ImpacTrack, the grading and handling processes were creating levels of wastage. However, with a number of straight forward modifications to the equipment our fruit utilisation has increased with negligible wastage levels.” ■

EXPERTS IN PROVIDING THE PERFECT COOLING SYSTEM FOR YOUR PRODUCE

JD Cooling

JD Industrial Cooling

JD Industrial Controls

JD Power Systems

SWIFTLIFT

Elevators & Conveyors

The UK’s leading independent supplier of bespoke cooling Product Cooling • Field heat removal • In-field solutions • Rapid cooling & hydrocooling • Blast chilling / freezing

TODD

Product Storage • Long to short-term crop storage • Heat recovery • Ultra-stable temperature & humidity control

Sugar Beet Cleaner Loaders

Service support available throughout the UK 24/7, 365 days a year.

01406 422 286

T: 01553 767446

E: info@jdcooling.com

www.jdcooling.com 66009

sales@terryjohnsonltd.co.uk Cranmore Lane, Holbeach, Lincs PE12 7HT www.terryjohnsonltd.co.uk

126 www.farmersguide.co.uk July 2019

Vegetables.indd 126

23/06/2019 19:54

BENNETT

ENGINEERING CROP STORAGE

Advice Design Installation Maintenance Project Management

For ALL Your Crop Drying, Handling & Storage Requirements, from Small Upgrades to Complete Projects

Call Mike on

e : mike@bennettcropstorage.co.uk w : www.bennettcropstorage.co.uk

01760 725990

JONES BROTHERS Pre-Stressed Concrete Wall Panels Inspired by the latest technology in Pre-stressed Concrete Wall Panels, and with the desire to continue in meeting our customers' requirements regarding Quality, Design, Volume & Delivery...

66046

...we have opened a new & improved manufacturing facility in Greenfield, Flintshire, North Wales

Palletising with Pace We Provide Performance | Accuracy | Commitment | Efficiency

• Brand new precision built moulds & tooling • Larger range of sizes & loadbearing options (95, 145, 200 & new 240, 280mm) • Selection of Concrete Lego Blocks • Increased capacity • Made to measure • Shorter lead-times • Established Quality Assured products at competitive prices • Design & Bespoke Project capability

MECHANICAL HANDLING LTD 66236

t: 01352 719182 or 01352 716648 • f: 01352 837690 e: tracey@jonesbrothersconcrete.co.uk www. jonesbrothersconcretepanels.co.uk

01775 630 900 sales@robotpalletizing.co.uk www.robotpalletizing.co.uk PACE Mechanical Handling Ltd, Wensor Farm, Main Road Hop Pole, Deeping St Nicholas Spalding, Lincs PE11 3HL

NEW ARRIVAL TO UK FROM

66266

The Award-Winning

KEILER Potato Harvester

www.ctmrootcropsystems.co.uk Available for demonstration, call Karl at CTM Root Crop Systems on 07919 916918 July 2019 www.farmersguide.co.uk 127

Vegetables.indd 127

24/06/2019 11:34

Tel: 01455 891929 • Fax: 01455 891974 Sapcote Road Industrial Estate • Burbage • Hinckley • Leicestershire • LE10 2AU

www.multiindustrialdoors.co.uk multidoors@hotmail.co.uk • Plastisol Colour Coated Roller Shutters • Insulated Roller Shutters • Sectional Overhead Doors • Steel 10 Point Locking Security/Personnel Doors

• Steel Fire Exit Doors • Fast Acting High Speed Doors • Dock Leveller/Loading Bay Installations • PVC Strip Curtains • and many more products

Nationwide Service

INDUSTRIAL DOOR Specialists

66315

• Galvanised Roller Shutters

RACKENBUR engineering Ltd

Suppliers of new and secondhand grading/handling machinery for potato and vegetable growers, packers and processors

The leading UK The leading UK manufacturer of manufacturer of rubber grading rubber grading screens for screens for all types of all grading equipment. types of grading equipment. •Rubber grading screens • Rubber •Rubber web coversgrading screens •Sample •riddles Rubber web covers •Perforated washer belts

• Sample riddles • Perforated washer belts Contact AGRI-WEB Ltd Tel: +44 (0) 2891275913 Web: www.agri-web.co.uk Email: info@agri-web.co.uk

Contact AGRI-WEB Ltd Tel: 02891275913 www.agri-web.co.uk Email: info@agri-web.co.uk

FOR SALE... 2010 Tong 7/6’ hopper & 6 row Evolution cleaner 3 phase IMMACULATE MUST BE SEEN

Used Tong-Peal Tong(8’) “Maxi” 2400mm full Easy Fill twin spec Caretaker, box filler & feed elevator including Scott’s 4 row Evolution 3 phase cleaner, vgc, hardly used 3 phase, must be seen

65744

For more stock please visit: www.brackenburyeng.com Please contact David Brackenbury T: 01526 341252/341635 • M: 07837 226740 • F: 01526 323182 E: davidbrackenbury@btconnect.com

The Suffolk Trailer... Robust: Our trailers are designed to meet the challenges of modern agriculture with optimum strength to weight ratio.

PROVEN IN THE FIELD Reliable: Constant attention to detail and build quality gives you a product you can rely on.

Reputation: We have over 50 years’ experience building trailers and a reputation we are proud of.

richard-western.co.uk

Richard Western Ltd., D’Urbans, Framlingham, Suffolk, IP13 9RP t: 01728 723224

f: 01728 724291

e: sales@richard-western.co.uk

128 www.farmersguide.co.uk July 2019

Vegetables.indd 128

21/06/2019 16:39

Vegetable & Root Crops Joining forces in mechanical weed control equipment German company Zürn Harvesting GmbH & Co. KG, has acquired a substantial stake in Garford Farm Machinery Ltd, a move which will strengthen the position of the UKbased manufacturer of technological mechanical weed control solutions. Zürn Harvesting develops, produces and markets technology for agriculture, mainly cutting platforms for combine harvesters and forage harvesters as well as plot combine harvesters, which are used in plant breeding and research. Garford products cover a number of categories for mechanical weed control under the Robocrop brand. Robocrop precision guided inter-row hoes use cameras to detect the crop rows and then accurately guide the hoe shares in such a way that weeds are removed but the crop is protected. The Robocrop InRow Weeder makes it possible to hoe between rows but also within rows, between the plants. The intelligent camera technology recognises individual plants as the weeder passes and controls special hoeing elements to cut the weeds precisely around the crop without damaging it. For chemical crop protection, Garford also offers the Robocrop Spot

The Robocrop InRow Weeder.

Spraying technology, in which the chemicals are applied specifically and precisely to the weed or crop plants to be treated. Machines for targeted weed control are in ever-increasing demand from farmers around the world, points out Garford. The main areas of application are in organic farming and vegetable growing, but there is also an increasing

in the main European and North American markets. The development and production site in Peterborough will remain the company’s headquarters and will continue to be managed independently by Philip and Janet Garford. The company says that it is currently hiring additional personnel to meet the growing demand. ■

interest in conventional farming, especially for row crops such as maize and sugar beet. The Garford and Zürn families will co-operate closely in the future which will be advantageous for both sides, particularly in terms of sales and production, says Garford. The existing Garford distribution channels will remain mostly unchanged, especially

Rapid chiller ensures tip-top condition In readiness for the forthcoming asparagus season, the Specialist Installation Division of TNS installed a refrigeration system on the east coast of Suffolk. The system incorporates a ‘Rapid Chill’ pod for two pallets and a humidifier to maintain a high humidity. The twin pod allows the operator to ensure a pallet of 50 trays of asparagus can be chilled quickly to remove the field heat. An auxiliary fan on the pod is run either on an operator set timer or based on crop temperature. The pallet is then taken

01284 812060 sid@tnsgroup.co.uk

off the pod and stored in the general area of the cold store. The operators “love it” according to the farm owner, who is contemplating an additional pod for another unit. The whole system has provided much better temperature control, improved shelf life and ensured the crop is delivered to the market in tip-top condition, he says. The business is very confident that the system will handle the crop as ambient temperatures rise and demand increases, he adds. ■

The twin pod allows the operator to ensure a pallet of 50 trays of asparagus can be chilled quickly to remove the field heat.

Thurlow Nunn Standen Ltd Specialist Installations Division

See how the Specialist Installations Division can help you with your crop quality solutions.

“Leaders in every field”

Call us to discuss cooling solutions for your agricultural crops including asparagus, onions, lettuce, soft fruit, top fruit and stoned fruit. www.tnsgroup.co.uk July 2019 www.farmersguide.co.uk 129

Vegetables.indd 129

23/06/2019 19:56

ROOT

THE

Conveyor Webs Made In The UK

LARGEST RANGE OF WEBS, ROLLERS AND DRIVES IN THE UK

www.pananglia.com

66438

66435

01787 242757

• Spapperi Single Row Inter Plate Weeder with hydraulic weeder head position control and front and rear depth adjustment

ds o Di n L st td S rib is in pap uto the th p r E e eri fo xc UK r lu s

iv e

• Designed to weed between and around plants grown in rows such as pumpkins • First Spapperi Inter Plant Weeder in the UK • Option of manual weeder head position control

Call James on 07803 765440 • email james@jfhudson.co.uk • www.jfhudson.co.uk

£5,800 + VAT & Delivery

Graders, washers, tipplers and fillers - trust Haith to handle it. t +44 (0) 1302 831911 e sales@haith.co.uk Haith Advert Templates ART.indd 1

www.haith.co.uk 29/11/2018 10:14

130 www.farmersguide.co.uk July 2019

Vegetables.indd 130

21/06/2019 16:40

Vegetable & Root Crops Energy-efficient cooling system

JDI customer Albert Bartlett required full design, installation and commissioning of a complete energy-efficient ammonia/glycol (HFC-free) cooling system to enable the business to meet the demands of its new chilled potato products.

Industrial refrigeration specialist JD Industrial Cooling (JDI) has designed and installed an energy-efficient cooling system to enable potato farmer Albert Bartlett to meet demands for its new chilled potato products. Supplying over 20 per cent of the UK’s fresh potatoes, including to major retailers, Albert Bartlett has invested in its Airdrie production site including tasking JDI to provide a new central temperature control system for the whole process factory including refrigeration plant room, storage facilities and packing areas. JDI’s solution features a Sabroe low temperature screw compressor at 1,000–3,600rpm, three Sabroe (extended maintenance hours) high temperature reciprocating compressors with a speed range of 500-1,500rpm, hybrid condenser, two spiral freezers to deliver mash potato in sealed trays, 16 glycol air coolers

and three end suction glycol pumps, each with a flow rate of 242m3/hr. Rejected heat from the drive systems in the refrigeration switch room needed to be managed, with another glycol air cooler sized at 20kW installed to ensure that a room temperature of 20–25ºC is maintained. Equipment capable of operating at very low temperatures was a key consideration of the brief as well as hygiene associated with food production. In collaboration with JD Cooling Group’s other business units, the automation system consisting of two network protocols: Ethernet and Profibus, was designed and installed by JDI Controls. As JDI standard, the electrical automation system has been designed with no single point of failure and has specific software that helps to optimise the running conditions of the complete system. ■

Brassica demonstration open day Following the success of the first open day last year, Hutchinsons’ Brassica Demonstration Site Day will be held at Bayholme Farm Old Leake, Boston, on 11th July in conjunction with the Allium & Brassica Centre, by kind permission of F Daubney & Sons. Visitors will have the opportunity to view how new near-market brassica-related herbicides, insecticides, and fungicides are performing and compare them with current commercial practise, explains Hutchinsons vegetable technical support Peter Waldock. “For example, many of the new fungicides coming on the market are predominantly protectant rather than having a knock-down effect, so applications have to be better targeted to optimise efficacy,” he says. “There will also be plots looking at biostimulants, crop elicitors and foliar nutrition products,” he says. “Our trials explore maximising

efficacy in kale and Brussels sprouts, and the knowledge gained can then be related to all brassica crops,” he adds. In addition, work on better understanding of soil management will be highlighted, and the Healthy Soils team will be present to discuss how to get the most from soil. This will be accompanied by demonstrations of strip tilling and Omnia Precision Agronomy, providing an exciting insight into the ways farm yields can be improved through agronomy. Also on display at the Old Leake site will be Hutchinsons TerraMap, the first high definition soil scanning system in the UK (see p26 for more info). Visitors will also have the opportunity to discuss their needs with the Hutchinsons’ team and also the leading manufacturers involved in the vegetable sector, including Bayer, BASF, Syngenta, Certis, Corteva, Adama, Belchim and FMC. ■

Hutchinsons will be hosting a brassica demonstration day in early July.

Hutchinsons’ Demonstration Site Day FACTS When: Where: Open: More info:

11 July 2019 Bayholme Farm, Old Leake, Boston 12.00–16.00 (catering will be provided) For more info/ reserve a place, email: bookings@hlhltd.co.uk

Transfer trailer added to product portfolio Vegetable handling equipment specialist Tong Engineering has been appointed UK distributor for the Hawe-Kuw 2000 root crop transfer trailer from German manufacturer Hawe Wester. The announcement comes as Tong continues to develop its range of handling equipment to offer the complete handling solution from post-harvest to pack. “Manufactured with up to a 30m3 holding capacity, the transfer trailer runs alongside the harvester, receiving crop directly from the harvester for cleaning and loading at the field side; keeping tractors and soil off the road, while reducing crop

mileage,” explains Tong Engineering sales manager, Richard Knighton. Featuring heavy-duty construction with a mounted steel hopper and integrated rolling floor, the Hawe-Kuw 2000 is suitable for use on multiple root crops including potatoes, carrots, onions, beetroot, parsnips and bulbs. At the outfeed, the transfer trailer is fitted with an adjustable coil cleaning unit for effective removal of soil from crop, feeding a 1,200mm wide folding elevator, which allows crop to be gently transferred to bulker lorries at the side of the field, at capacities up to 120t per hour. “With a transfer height of 4.1m, the

trailer ensures very gentle handling while a waste bunker to the underside of the cleaning unit ensures all soil and debris can be emptied back into the field,” commented Richard. “The trailer is the ideal option for growers who want to clean crop and bulk-load in the field,” he added. “While the coil cleaning unit within the transfer trailer is proven to be very effective, we are already working with Hawe Wester to offer growers the option of Tong’s Easy Clean separator as the specified cleaning unit, which will bring even greater flexibility and unrivalled cleaning results on all crops, in all conditions,” concluded Mr ■ Knighton.

The Hawe-Kuw 2000 field trailer is now available from Tong Engingeering.

July 2019 www.farmersguide.co.uk 131

Vegetables.indd 131

23/06/2019 19:58

66413

Offering a range of equipment for the grower... Celebrating 40 years of manufacturing, the Dutch forklift specialist Prins decided to open a UK Division to improve the supply of their range of machines for the Horticultural, Growing and Farming industries in 2016. Exactly 12 months into the first year of trading, Prins Forklifts UK Ltd based in Lympne has secured the Toyota manufactured Cesab product dealership. A much sought-after complete product range of warehouse and conventional forklift equipment manufactured by Toyota, the Cesab product offers a range of LPG, diesel and electric counterbalance machines up to 3.5T and the full warehouse range, along with a national dealership network to offer full UK service support. Whilst the Prins Tiger & Boxer machines continue to dominate the semi rough terrain orchard and poly tunnel applications, the Cesab conventional forklift range is ideally suited to pack houses, C A stores, garden centres and glasshouse applications. The robust electric pallet truck range also seems to be on the increase with garden centres and nurseries, especially those selling heavy compost and animal feeds. Companies with dock levellers are also benefitting. With a stock of brand new machines available for immediate delivery, Prins can offer not only a very competitive price, but also immediate delivery on common models, saving a 12-14 week wait

For all your forklift requirements... ✔ new or used ✔ traditional, warehouse or agricultural ✔ sale, rental, hire ✔ maintenance, service, repair, estimate ✔ thorough inspection

Setting

s d r a d n a t NEW S

Regardless of location, Prins UK can support your growing needs

Call: 01303 237122 / 07704 779045 Email: sales@prinsforklifts.co.uk www.prinsforklifts.co.uk

Jacobsens GFM

You

.. . w o n k e know, w

Dominator 310 Teleflex

Duplex Euro 800

Boxer

Contact: Symon Jacobsen Tel 01561 361 340 • Mob 07973 542 142 • Email: symon@jacobsens-gfm.co.uk • www.jacobsens-gfm.co.uk 66316

Untitled-1 132

QUALITY... INNOVATION... EXCELLENCE 21/06/2019 16:43

Fruit & Viticulture

Novel approach to moth control delivers benefits in apple orchards Pheromones are becoming a mainstream method of controlling important lepidoptera pests in dessert apple orchards across the country. This season, Agrovista’s fruit agronomy team has been supporting the use of the novel pheromone system called RAK 3+4 across dessert apple orchards at risk of codling and tortrix moth attack. After a successful run of trials and commercial use over the past few years, many growers were keen to use the system again in their orchards or to try it for the first time, says Agrovista fruit technical manager Alex Radu. “RAK 3+4 provides control by disrupting mating behaviour, blanketing the orchard with artificial female pheromone released by ampules that hang in the trees. “This masks natural pheromones given off by female moths so males can no longer find them and mate, preventing females from laying viable eggs.” Trials have shown the system has consistently saved three or four rounds of insecticide for first generation codling control and has prevented potentially difficult-tocontrol and highly damaging second generation flights from occurring. “This has potential economic and environmental benefits, and helps growers meet tightening retailer protocols,” says Mr Radu. Each RAK ampule has two compartments, one containing artificial codling moth pheromone and the other summer fruit and fruit tree tortrix moth pheromone. Ampules are placed in the top third of trees in late April or early May before the first flights begin, at a rate

Jim Burston, farm manager at Herefordshire-based Tillington Top Fruit has been trialling RAK 3+4 for the past three years. Mr Burston manages 350ha of apples and cherries from his base at Upper House Farm, Tillington. Key varieties include Red Prince, Junami, Gala, Red Windsor and Spartan destined for Morrisons and other major retailers. Overall dessert apple output is around 2,500t of fruit a year from 75ha. Codling moth pressure is very high and summer tortrix moth can also be troublesome, partly due to climate and topography but also because a lot of the farm is planted with cider orchards. “It is not economic to control codling in established classic cider orchards. They are basically high-rise flats for moths, but we can’t always keep cider and dessert orchards well apart as we plant the later-flowering cider trees in frost pockets spread across the farms,” says Mr Burston. Codling moth counts in dessert apple orchards regularly exceed threshold, with 30–40 males per week being caught in pheromone traps at some sites season after season. The chemical treatment threshold is just 5 males per week. Second-generation thresholds are also breached, typically in three years out of five. Until two years ago, three or four insecticide treatments for first

generation control was the norm. In 2017 he tried RAK 3+4 on 10ha of dessert apples. No chemical applications were used to control codling or tortrix moths in these orchards and fruit yields and quality were maintained, with no grade-out due to damage. In 2018, he raised the RAK area to 15ha. The same results were achieved, despite some test orchards being closer to cider orchards, which can reduce the efficacy of RAK 3+4. This is because they harbour high populations of moths and mating readily occurs. Female moths are not affected by the artificial female pheromone, so they can fly into adjacent RAK-treated orchards and lay eggs. “As well as helping us in terms of marketing, reducing pesticide use also has obvious environmental benefits and is good for beneficials that help keep moths and other pests at bay,” says Mr Burston. “The RAK system is also very reliable, offering as good control of the first generation as we were achieving with chemicals, but with a lot less management. We don’t have to worry about getting our timings just right, and it takes the worry out of second-generation control, which can be difficult due to harvest interval limitations. “It also reduces the amount of paperwork and removes any concerns over harvest intervals and residues on fruit.” Purchase costs are similar to firstgeneration chemical control, and the system costs about £65/ha to install each season. “Given the advantages and the level of control, that’s a cost I’m willing to bear,” Mr Burston adds. “In seasons when a second

shoes prevent gouging and protect the deck, increasing toughness and durability,” he added. “The machine is also equipped with features that ease maintenance, including grease fittings that are easy to reach and a smooth, sloped deck that’s free of components for easy clean-up and grease-able quick-change blade pins. Rounded wings that slice through brush and a curved leading edge that easily manoeuvers close to trees and poles deliver optimum performance and the calculated positioning of welded baffles optimizes airflow for even cutting and superior distribution.” ■

Woods Batwing Rotary cutter.

of 500/ha in a grid formation that provides season-long coverage.

Tough test

Jim Burston with a RAK ampule.

generation occurs, we’d clearly be better off.”

Increasing pressure This season RAK 3+4 will be used in some dessert orchards adjacent to cider orchards at Tillington to provide an even tougher test. Mr Radu hopes the results will reflect those at a Cambridgeshire high-risk site in 2015, where only one or two fruits per 1,000 suffered codling moth damage in RAK 3+4 treated areas, compared with 60-70 in untreated areas. As before, manufacturer BASF is supplying product for part of the work. “They are as keen as Agrovista is to see how well the system copes under increasing pressure,” says Mr Radu. “We as a company strongly support integrated pest management to help growers reduce pesticide use and its effect on nontarget species. “We believe that through effective monitoring, the use of RAK 3+4 and our GCI pest and disease warning service we can help growers meet these aims while greatly simplifying control programmes for no extra cost.” ■

Rotary cutters on view Machinery supplier Simon Richard was at this year’s Royal Highland Show with three Woods Batwing Rotary Cutter models the BW12, BW15 and BW 15.60 with Multi-kit on display. “The BW15.50 flex-wing cutter is the flagship product sold into the agricultural market with a range of features combining to make it the most durable in the field,” said Simon. “Steel tubes surround the perimeter to absorb shock and chain shielding integrated within the frame prevents damage. The machine’s beefy, heavy-duty skid

July 2019 www.farmersguide.co.uk 133

132-228 July.indd 133

24/06/2019 16:17

Latest vineyard, fruit and orchard tractors at new event A new event for vineyard owners and managers will provide a showcase for the latest Landini specialist narrow tractors. Viti-Culture 2019 is thought to be the first event to encapsulate all soil-to-cellar aspects of the wine trade and bring together a range of viticulture, wine-making and business solutions under one roof. This free to attend show will be held on 11th July 2019 at Plumpton College, East Sussex and is organised by Pitchfork Events, part of The Ramsak Group, a business originally set up as a co-operative to help farmers share resources such as machinery, but which is now a broader enterprise operating within the rural south-east of England. Machinery dealer Horsepower UK, based at Selling near Faversham, Kent, supplies specialist equipment such as Wanner sprayers, Humus mowing and pulverising machinery, SALF orchard and vineyard access equipment, Weidemann wheel loaders and Ilmer handling equipment. The company is also one of the UK’s leading dealers for Landini

132-228 July.indd 134

Rex 4 Series specialist fruit tractors, which are available in different configurations to suit a wide range of growing systems for grapes, soft fruit, top fruit and hops – any situation, in fact, where space for machinery is limited. Vineyard versions of the Rex 4 can be configured to no more than 1m wide, for example; plus a choice of power outputs from 70–102hp – and up to 112hp for the orchard/ soft fruit models. The latest-generation Rex 4 Series tractors come with a number of new and improved features designed to increase productivity and make operating the machines easier and more comfortable.

Transmissions Among an expanded choice of transmissions, three-speed powershift is available for the first time, enabling operators to quickly change ground speed when towing or working soil-engaging implements without losing momentum. Fingertip power shuttle shifting between forward and reverse also makes life easier and more

The Landini Rex 4 Series packs new and additional features into specialist tractors for orchards, vineyards and hop gardens.

comfortable for the operator – as does the front axle suspension developed to cushion the front end of the tractor as it passes over humps and hollows. The front linkage and PTO options add versatility and added productivity potential to the Rex 4 line-up, while new Eco PTO gearing and Eco 40kph transmission options reduce fuel consumption by lowering engine speeds in work and during transport. Landini manufacturer Argo Tractors has catered for

all weathers with a choice of open platform or new flat floor cab – a design that is more comfortable than sitting astride the transmission tunnel. It also offers a version of the cab with additional seals and a filtration system for incoming air that can be switched between regular and carbon filters to provide the maximum Category 4 rating for operator protection from exposure to pesticides at lower cost and greater convenience than other solutions. ■

Viti-Culture 2019 FACTS When: 11th July 2019 (0830–1700) Where: Plumpton College, East Sussex BN7 3AE Info and tickets: Registration is free at www.viti-culture.com.

25/06/2019 16:12

Fruit & Viticulture Crop protection solutions for grapevines The phenomenal growth in the area under vines in the UK over the past five years is even having an effect on land values. Strutt & Parker’s Farmland Market Review shows arable land prices flat-lining while land suitable for grapevines can gain a £2,000/ha premium. Industry body, WineGB, has recently confirmed that around 3 million vines were planted this year – equating to an additional 690ha of vineyards and a 24 per cent increase in the overall land under vine. This means the UK now has an estimated 3,500ha of vineyards, says crop protection company Certis. And so how do growers get the best from their vineyard to justify the very high investment costs of a crop which takes three years until the first harvest? Those making sparkling wine (69 per cent of the wines produced now are sparkling) are facing another two years before they have a single bottle to sell. As crop protection specialists, Certis adds that consistent productivity is difficult to achieve with the British weather being so variable and, according to viticultural consultant Duncan McNeil, English sparkling wine yields need to hit a

132-228 July.indd 135

long term average of 8t/ha, while only currently achieving 3t/ha. After taking into account the importance of choosing the right site, successful planting and establishment of young vines (and escaping late spring frosts), keeping the vines healthy is the next vital step to making a success of producing quality grapes, says Certis. Despite all the enthusiasm for this new crop the UK is still small on a global scale – Champagne has around 34,000ha of vines planted for example – but the recent growth reflects the industry’s confidence especially after the near perfect growing year and harvest of 2018. A reflection of this is the limited availability of crop protection solutions for grapevine growers in the UK. Recognising this, Certis has developed a wide range of conventional and biorational crop solutions to help develop innovative IPM strategies, vital for sustainable production. The aim behind the 20-page Certis ‘Vine Growers Product Guide’ is to provide both sound cultural advice and a comprehensive guide to what to look out for throughout

the vine growing year, says the company. For instance, growers should consider nutrient status of plants and the general health status of the vineyard; manage vineyard trellising and airflow to minimise leaf wetness; plus reduce leaf litter left on the ground as this can be a source of inoculum. The product guide demonstrates that Certis has a unique vine portfolio of products, some with organic growing approval as well, offering suggestions and solutions to problems from bud burst to leaf fall.

Limited choice Certis IPM manager, Selchuk (Semo) Kurtev (right) says that unlike arable crops, which have always attracted investment in R&D for full on-label approval, vines in the UK are considered a niche crop so growers only have a limited list of crop protection products. “Certis Europe has recognised that we can help

UK vine growers because we can bring our experience of working in France where vines are a major crop by supporting a number of our products with an on-label approval. A good example is Cuprokylt which is a protectant fungicide containing (50% w/w) copper oxychloride for the control of downy mildew, anthracnose and bacterial diseases of grape vines.” He also points out that the loss of actives has emphasised the need for more biorational crop solutions and Certis has a number including Finalsan, a non-selective bio-herbicide with full label approval for use against annual and perennial weeds, mosses and algae. “We want to bring sustainable solutions to UK vine growers while recognising that no single company can work on its own,” he concludes. To request a free copy of The Vine Growers Product Guide, email Certis at infocertisuk@certiseurope. com. ■

24/06/2019 16:28

17 JULY 2019 KENT

UK’S LEADING FRUIT FARMING EVENT ! REG

FOR T ISTER ICKET FRUIT S FOCU S.C O.UK

INNOVATION & TECH THEATRE HOSTED BY AGRI-TECH EAST

RASPBERRY WET CENTRE

CONCEPT PEAR ORCHARD

RESEARCH VINEYARD & VITICULTURE PROGRAMME

120 LEADING SUPPLIERS

2000 GROWERS

SPONSORED BY

@FruitFocus #FruitFocus19

Flails to give you the cutting edge

ING

N PRU

Orchard and vineyard machinery to suit every requirement

• Front - rear - side or offset for tractors 10hp - 400hp • Mulchsysteme gives proven control of pests and weeds while stimulating healthy crop and pasture growth

ING W MO

ING

AY SPR

01531 632171

www.slopemower.co.uk Simon Richard Ltd, Crown Tailrig, Bonchester Bridge, Hawick, TD9 8RA Tel: 01450 860774 Fax: 01450 860772 mail@simon-richard.co.uk www.simon-richard.co.uk

www.agrimec-ledbury.co.uk

136 www.farmersguide.co.uk July 2019

Untitled-1 136

21/06/2019 16:44

Fruit & Viticulture Collect free CPD points at Fruit Focus 2019

BASIS and NRoSO members can collect CPD points from attending Fruit Focus.

More than 130 fruit industry suppliers will be attending Fruit Focus in 2019. The event is not only a great opportunity for learning and networking, but also will help those committed to continuous learning by offering CPD points. BASIS members heading to Fruit Focus will have the opportunity to collect up to six BASIS CPD points. Members should head to stand 804 with their BASIS membership card for scanning and collect two points for attending the event. Pick up a stamp card to gain further points throughout the day. A total of four extra points can be collected by attending any of the Fruit Forums or Research Tours, with one point gained per activity. Stamp cards should be handed in at the BASIS

stand before leaving the event. NRoSO is offering members two points for attending Fruit Focus. Visit the Organisers Office and present your membership card or complete the register to be awarded your points. CPD stands for Continuing Professional Development. It refers to the process of tracking and documenting the skills, knowledge and experience gained both formally and informally alongside work, beyond any initial training. Attending Fruit Focus 2019 is an effective way of keeping up with the latest developments and innovations in the fruit growing industry. ■

Fruit Focus 2019 FACTS When: Where: Tickets: Info:

A full list of exhibitors at this year’s Fruit Focus can be found on the website.

Weds 17th July 9am to 5pm East Malling Research Centre, New Road, East Malling, Kent, ME19 6BJ (near junctions 4 & 5 of the M20) £10 each, available online in advance or on entry; Parking is free www.fruitfocus.co.uk

Orchard and vineyard machinery specialists Ledbury based Agrimec is an agricultural engineering firm which started as a distributor of Lamborghini Tractors and Hardi sprayers. The business has always been involved with niche markets and continues to do so today. It no longer has the Lamborghini tractor franchise but did keep the Hardi sprayer franchise selling crop sprayers and mist blowers for orchards and vineyards. The company also has the SFM Technology fruit machinery franchise selling fruit harvesting equipment, Perfect specialist mowers for large arable areas and orchards and

vineyards and Florida mist blowers for orchards and vineyards. In addition to these it also sells Pellenc battery powered pruning equipment, which has been enthusiastically received by customers. The company has a fully equipped workshop with two engineers undertaking maintenance and repair work on all kinds of agricultural and horticultural machinery. It also takes on design and build work mainly for specialist horticultural businesses where there are different requirements to the standard machines on offer. Included in these

AT THE FOREFRONT OF VINEYARD SPRAYING - est 1895 -

Agrimec stocks the range of Hardi crop sprayers and mist blowers for orchards and vineyards.

types of machines are cider apple washers and cleaners, top fruit mist blowers and sprayers for strawberry

Increase productivity

tunnels and other soft fruit. Agrimec also stocks hundreds of spare parts in its stores. ■

Targeted application

Reduce time, fuel & wastage Berthoud have developed a range of spraying solutions that provide outstanding application quality and have been designed for easy use and maintenance, saving you time and money.

WIN’AIR with ‘AB Most’ boom

01553 774997 | www.berthoud.co.uk July 2019 www.farmersguide.co.uk 137

132-228 July.indd 137

24/06/2019 16:42

For All Your Drainage & Pipeline Needs For more than 45 years JDP has offered first class customer service, expert knowledge and advice, and high performance products customers have come to know, trust and rely on.

Free ry e Deliv ic

Restr

app tions

Underground Drainage

Flood Management

Land Drain & Twinwall

Ducting & Chambers

MDPE & Irrigation

Soil & Waste

Channel Drainage

Rainwater Harvesting

Buy online or from 26 branches nationwide. Free technical support & legislation advice.

Contact JDP ďż˝ 0800 195 1212 ďż˝ sales@jdpipes.co.uk GLOBE www.jdpipes.co.uk

TIME TO CHANGE? New rules and regulations mean many septic tanks and treatment plants are illegal Our services include supplying and installing septic tanks and treatment plants Contact us for more details

. c o.

01469 531229 sales@tanksrus.co.uk

Tanks R Us, Main Street, Thornton Curtis, North Lincolnshire, DN39 6XW

www.ta n k s

66454

138 www.farmersguide.co.uk July 2019

Untitled-1 138

21/06/2019 16:46

Septic Tanks

Don’t pooh-pooh septic tank regs as deadline approaches Anyone using a septic tank to discharge sewage from the home or business premises in England and Wales, needs to be aware that the final deadline for regulation introduced in 2015 is coming into force at the end of the year. Dominic Kilburn gets to grips with the new regs. As from 1st January 2020, just 5 months away, all septic tank operations need to comply with the Environment Agency’s GBR ‘General Binding Rules’, which were first introduced in 2015 for new installations from that date. In simple terms it means that any existing septic tank that currently discharges directly to surface water, however long it has been in situ, must cease from doing so by that date, and an alternative system sought. The Environment Agency stresses that it will only grant a permit for a discharge from a septic tank directly to a watercourse in exceptional circumstances. It’s also worth noting that even where properties with tanks that discharge directly to surface water are sold prior to that date, responsibility for the replacement or upgrade of the existing treatment system should be addressed between the buyer and seller as a condition of sale. According to an Environment Agency spokesperson answering questions put by Farmers Guide, January 2020 is the target date for compliance with GBR as five years (2015–2020) was considered a reasonable timescale for operators to meet the requirements and make the necessary improvements or changes to their discharge arrangements. And while the Agency says that it will give people and businesses sufficient time to comply with any changes that are required, it will take enforcement action if absolutely necessary where advice and guidance has failed.

What are the options? Clearly, if you are an operator of a septic tank that discharges direct into surface water you are going to have to act very quickly if nothing has been done to date. The easiest solution would be to connect direct to the mains sewer, although this is unlikely to be an option for remotely located farmhouses and businesses and the reason why a septic tank was installed in the first place.

Farmers and businesses with septic tanks that currently discharge into a watercourse will have to upgrade their sewage system by 1st January 2020.

A field drainage system can operate with a septic tank or sewage treatment plant.

A second option is to replace the septic tank with a small sewage treatment plant – a more sophisticated unit than a septic tank which usually does both primary and secondary treatment, and which requires an electricity supply used to artificially introduce air to the treatment plant. It is this oxygen transfer through the sewage that enables the growth of aerobic bacteria which are more effective in the breakdown of sewage than the bacteria present in a septic tank. Install this kind of operation and discharge can continue to be direct to surface water (providing it meets the required Standard BS EN 12566), or it can drain to a field drainage system (see below). In addition, the Agency points out that if you’re discharging more than 5m3 (5,000 litres) per day into surface water using a treatment plant, a permit must be applied for.

As from 1st January 2020 septic tanks will not be allowed to discharge into a watercourse unless the Environment Agency grants a permit in “exceptional circumstances”.

A quick guide to septic tank regs • • • • • •

Your septic tank will currently drain into either a watercourse/ditch or a drainage field If it discharges into a watercourse, new legislation means you must replace or upgrade your system by 1st January 2020 You can replace a septic tank with a sewage treatment plant and continue to discharge into a watercourse, or you can connect the existing septic tank to a drainage field, providing the septic tank is in good working order A sewage treatment plant can discharge into surface water or a field drainage system If you are selling your property before that date you must replace or upgrade the system beforehand Go to: www.gov.uk and search ‘General Binding Rules’ for the full set of guidelines to the new legislation

The third option is to keep the existing septic tank (provided it is in working order) and discharge into a drainage field consisting of a network of perforated or slotted pipes which provide secondary treatment of waste. Again, there are limitations and for a field drainage system there is a 2,000-litre daily discharge

capacity before a permit is required. This treatment system must be to BS 6297:2007. It should be said that, if a septic tank that currently discharges to ground is operating correctly and is compliant with GBR, there is no requirement to upgrade or replace it continued over...

July 2019 www.farmersguide.co.uk 139

132-228 July.indd 139

24/06/2019 16:43

Market Leaders in Solving Septic Tank Problems & Illegal Overflows Standing the test of time for over 30 years, Mantair Limited is one of the UK’s leading independent septic 66382

tank and sewage treatment plant specialists. Providing a professional service in the field of wastewater treatment products, including design and installation of septic tanks, septic tank conversions and sewage treatment plants for both commercial and domestic customers.

Our Services Include:

• • •

Septic tank regulatory compliance Septic tank upgrades and conversions Septic tank insurance claims

SAVE MONEY!

• •

Sewage treatment plant installations Drainage field installations

• SAVE TIME! • SAVE MESS!

Why replace your septic tank when you can convert it! The Mantair septic tank conversion unit is a sewage treatment system specifically designed to fit within an existing septic tank or cesspool, effectively converting the existing tank into a small sewage treatment plant, producing a ‘treated’ effluent suitable for discharge direct to a natural watercourse. We obtain a permit to discharge from the Environment Agency for every conversion unit installation, and once issued, the system is fully compliant with the 2020 general binding rules.

Are you Compliant? If you’re unsure whether your sewage treatment system is compliant with the new 2020 rules and need advice, give us a call and we will be happy to help!

Tel 01255 853890 email sales@mantair.com Untitled-1 140

MANTAIR 21/06/2019 16:48

News

Septic Tanks This ‘E-range’ sewage treatment plant supplied by JDP is a more sophisticated unit than a septic tank which usually does both primary and secondary treatment, and is an option for those needing to upgrade their septic tank in light of fastapproaching regulation changes.

...from previous page

solely owing to the age of the system. However, if you are located in or near designated sensitive areas where a higher level of protection is needed, small sewage discharges will continue to require permits as necessary. Constructed wetlands or reed beds, or other systems are not able to operate under GBRs and their operators should apply for a permit or consider if they need or wish to amend their drainage arrangements.

Having started out in agriculture 45 years ago, Carlisle based JDP Ltd is a company offering expertise in civils and drainage on a nationwide basis. Technical support supervisor, Tom House stresses that anyone with sewage discharge needing to comply with the General Binding Rules by 1st January 2020 should seek professional

Anyone involved in crop spraying should be vigilant about protecting themselves by ensuring their vehicle cab is fully-sealed and insulated with an effective HVAC system, SPAL Automotive has advised. Matthew Morris, UK managing director of SPAL Automotive believes that manufacturers need to start thinking about reducing farmers’ exposure to these chemicals as a duty of care. A key application for SPAL blowers is maintaining cab air quality, particularly in the summer. SPAL’s contribution to HVAC solutions cool the air and filter out dust to ensure a comfortable and healthy space for the vehicle operator. In 2009, SPAL UK opened its Worcester warehouse, which carries over £500,000 of stock available for overnight delivery for main engine cooling, hydraulic cooling, HVAC, seed blowing and hedge cutting equipment. The comprehensive range is extremely adaptable with just 27 core SPAL products covering over 1,000 applications in agriculture. With

The SPAL Automotive HVAC system helps ensure a comfortable and healthy working environment for vehicle operators.

an extensive cross reference library covering the agricultural sector, including A Quick Guide to Blowers and Fans for Agriculture to summarise the top 20 most specified service replacement parts, SPAL UK can also provide a full technical support service. In 2019, SPAL UK is celebrating 10 years as the sales and warehousing arm of SPAL Automotive which itself is notching up 60 years of innovation in the design and manufacture of thermal cooling solutions. ■

Busy event for new Honda dealer

Online calculator On the Gov.UK website there is a calculator to help you work out how much sewage you discharge. You can use this calculator tool to work out the daily discharge volume from a septic tank or package treatment plant which is connected to one or more houses. This will help you decide whether you need to comply with the General Binding Rules or if you need to apply for a permit. Whichever treatment system selected, they must meet the relevant British Standard: BS EN 12566 for small sewage treatment plants and BS 6297:2007 for drainage fields.

Septic tank conversion 2020 For homeowners with septic tanks that discharge into ditches, streams and other watercourses, the Mantair septic tank conversion unit provides an economical alternative to the complete replacement of existing tanks and ensures regulatory compliance. The Mantair conversion unit is a sewage treatment system specifically designed to fit within an existing septic tank or cesspool, effectively converting the existing tank into a small sewage treatment plant, producing a treated effluent suitable for discharge direct to a natural watercourse. For every conversion unit installation it is necessary to obtain a Permit to Discharge from the Environment Agency, and once

issued, the system is fully compliant with the 2020 General Binding Rules. As the Mantair conversion unit fits within the existing tank structure this reduces the cost and inconvenience normally associated with sewage treatment plant installations, while upgrading the existing tank into a full functioning sewage treatment system. Although every conversion unit works in the same way they are all custom built to suit the existing tank dimensions. It is therefore necessary for a site visit to determine the dimensions of the existing tank and suitability for conversion. The Mantair conversion unit is available for installation throughout most of England and Wales. ■

MKM Agriculture Ltd was recently appointed as the Honda ATV and UTV dealer for Suffolk and enjoyed a busy Suffolk Show at the end of May. Pictured inspecting a Honda Pioneer 700 UTV are Battisford, Suffolk farmers Lucy and Tim Durrant with their children Ollie and Oscar. MKM Agriculture sales manager Keith Collins (second right) explains features and benefits.

07977 395704 Work Undertaken Includes: • Dutch Barns • Corn Bins • Aeroplane Hangars • Tarmac Plants • Wood Work • Factory Walls & Roofs • House Walls & Roofs • Commercial & Domestic • Repair Work

• Re-cladding • Airless Spray • High Powered Pressure Washing • Plasproof Compound • Sandtex Paint • Barn Paint • Bitumen • Creosote

66402

66382

Professional advice

advice. “It’s very important to comply with the legislation but it’s not a straightforward case of simply selecting a sewage treatment plant and getting the work carried out,” he comments. “Use of a drainage field for example is probably the easiest and least expensive option to ensure septic tanks that are currently discharging into water can comply, but there’s a lot of building regulations and issues with environmentally sensitive sites to consider before a system like that can be implemented. “And a sewage treatment plant needs careful consideration too, if they are the preferred option for compliance. For example their cost to purchase and install, and then running costs per annum, can vary considerably,” says Mr House. “Farmers should seek expert advice on the way forward for what is a complicated process to comply with the legislation, and JDP’s technical support department can provide free support for this,” he concludes. ■

Ensuring a healthy working environment

Orwell House, Cowley Road, Cambridge CB4 0PP email: moorescontractors@hotmail.co.uk Company Number: 7424736

Vat Reg. No. 970736106

July 2019 www.farmersguide.co.uk 141

132-228 July.indd 141

24/06/2019 15:18

Livestock

Royal Cornwall Show The Royal Cornwall show in mid May experienced extremes of weather across the three days, but that didn’t put off its loyal Cornish following. Report and pictures by Anthony Mosley. The 2019 Royal Cornwall Show brought a whole new meaning to the phrase ‘climate change’. The three day show, which took place on its showground close to the Atlantic coast of North Cornwall at Wadebridge, opened under blue skies and beautiful warm sunshine, which then turned to torrential rain and a biting chilly wind, forcing

the Grand Parade to be cancelled on the second day and had visitors struggling to get out of the car parks. None of this deterred the loyal following of the Cornish, however, when it comes to Royal Cornwall. Since 1793, generations of the agricultural community in this part of the country have supported their county show and it is viewed as not

Whitesbridge Farm • Margaretting • Ingatestone • Essex • CM4 9JT

AGRICULTURAL LIVESTOCK EQUINE EQUIPMENT & ACCESSORIES

Opening Times Mon–Fri 8:30am–5pm Sat 8:30am–1pm www.facebook.com/ dissupplies/

We are suppliers of Shearwell Tags

Animal Health Products Ear-Tags • Electric Fencing Wooden & Galvanised Gates Stock Fencing • Barbed Wire & Posts Drinking Troughs • Pipe Fittings Clothing & Footwear Kids Farm Toys

di@dissupplies.co.uk

66370

01277 356881

Livestock entries Entries of livestock across all breeds and species were once again very strong. The Supreme Interbreed Beef Championship went to the Alford family from Cullompton, Devon for its Limousin heifer Foxhillfarm Naomi. There seems to be no stopping Mike and Melanie Alford who, together with their daughter Charlotte, picked up at least four major championships at the show this year, including the British Blue Breed Champion and the Interbreed Sheep Championship with their Charollais shearling ewe. The Reserve Sheep Championship went to PH & GA Cornelius from Camelford, Cornwall for their very smart Scotch Black-Faced shearling ewe. The Interbreed Dairy Championship went to the Ley family from Holsworthy, Devon for its 4th calved Holstein cow Thuborough Freda 520. Standing a very close Reserve were the Ravenhill-Whites from Umberleigh, North Devon with their 2nd calved Jersey cow Whitenhill Rileys Coleus. For the first time ever, the Royal Cornwall Show hosted a

competition for ‘Teams of Five Cattle for both Dairy and Beef exhibitors’. This is to be the grand spectacle of future cattle competitions, but unfortunately it was somewhat marred this year by the difficult weather conditions. The British Blues won the Beef Teams challenge and the Holsteins triumphed in the Dairy section. As always there were some excellent entries of pigs, the Supreme Interbreed Championship going to PG Snell & Sons from Yeovil, Somerset for their Large Black sow Sock Doreen 209. The show hosted a short visit from the new Minister of Agriculture, Robert Goodwill, who met and talked to local farmers and industry leaders.

The Reserve Interbreed Sheep Champion, PH & GA Cornelius’ Scotch Black-Faced shearling ewe.

The winning Interbreed Beef Team of Five, the British Blues.

A fine line-up of Limousins in the ring.

Tel:

only playing a major role in farming life, but also as an important part of Cornish culture.

www.dissupplies.co.uk

ROTOR BALANCING & VIBRATION ANALYSIS

No need to remove rotors or shaft! Reducing labour & down time!!

For further information and a competitive price, call us on

01205 480460

Head Office: Medlam Yard, Medlam Lane, Carrington, Boston, Lincs. PE22 7LU. England Tel: 01205 480460 Fax: 01205 481394 63269

Southern Lincs Depot: Wigtoft Road, Sutterton, Boston, Lincs. PE20 2EL Tel: 01205 460600 Fax: 01205 461268

www.irelandsfarmmachinery.co.uk

142 www.farmersguide.co.uk July 2019

132-228 July.indd 142

24/06/2019 16:43

July 2019 www.farmersguide.co.uk 143

Untitled-1 143

21/06/2019 16:49

Heathbrow Important is interbreed beef champion at Suffolk Show Beef interbreed champion Heathbrow Important, owned by DA & LA Sapsed.

Hertfordshire breeders David and Lesley Sapsed were visibly delighted when their two-year-old bull Heathbrow Important was tapped out as interbreed beef champion at this year’s Suffolk Show. “I’ve been showing Simmentals since 1998 and it’s still a great feeling to win,” David told Farmers Guide. “He is a lovely bull with great locomotion and a super temperament,” he added. He will also be shown at this year’s Royal Norfolk Show which

will be hosting the National Simmental Show classes before heading to the Great Yorkshire Show. The couple also hope to show him at the breed society’s 50th anniversary show in Carlisle next year. Judge Mrs Pat Stanley from Leicestershire described Important as ‘a tremendously strong young bull’. “He showed wonderful balance, wonderful locomotion – what’s to fault?” Mrs Stanley chose Charolais heifer Balbithan Nancy as her reserve interbreed champion. The heifer from Darren Knox’s Nayland-based Drumshane herd has ‘massive potential’ she said. “I’m looking for balance, an animal that’s easy on the eye, that moves well with functionality. She had femininity – a super package.” Two Suffolk breeders scooped the native interbreed championship and reserve. Taking the top spot was Nick Reid with Aberdeen Angus champion Overbury Hall Passiflora. The five-year-old cow is home bred and due to calve again in September. The Overbury Hall herd was established on Mr Reid’s farm near Hadleigh in 2010. Reserve native interbreed honours went to the Lincoln Red breed champion Yarnhill Hannah from Natasha and Richard Mann from Iken. The two-year-old heifer was sired by Beverly Regal. In the dairy lines judge James Hudson chose the ‘absolutely Holly Dyer with Dairy interbreed champion Onco Art Mandy in the Grand Parade.

exceptional’ Onco Art Mandy from Kentbased Holly Dyer as his interbreed champion. He said the Holstein second-calver was “balanced throughout with tremendous depth and angularity”. Mandy was sired by Mr Aubrey Observer Art, out of Onco Autopilot Mandy. His reserve was Holstein fifth calver Wigboro Altarush Show president, Stephen Miles presenting the Durose from Smith Farms Withersfield Perpetual Trophy to Teresa Cook, owner of at Clacton. Durose calved the supreme champion pedigree pig. twin heifers in December and yields approximately 60-litres ewe lamb bred from the same ewe. per day, said John Smith who The family has around 120 Suffolk manages the herd. “She has good ewes on their Northamptonshire butterfat and is a great herd cow,” farm plus around 70 Texels and 40 he added. “She is not the biggest Charollais sheep. cow but has so much balance and The ram lamb was popular at I think that is why she does well.” home, Mr Pinny senior told Farmers The Smith family’s show team will Guide. “Out in the field he stands also be heading for Royal Norfolk, and looks at you down his nose. Edenbridge and Telford this season. He has got that bit of swank about him.” The judge said she was Blue Texel ewe delighted to be able to place a Top honours in the sheep rings Suffolk sheep in her interbreed line went to a Blue Texel ewe from up. “He is a great example with the Beckbred Livestock. makings of being a very good ram.” “She is stunning – very wellTop honours in the pig showbalanced and walked beautifully. ring went to Teresa Cook for She handled correctly throughout,” her Large White boar Millfields said judge Mrs Jakeman. Champion Turk. The SeptemberShe chose a Suffolk ram lamb born boar had “great shape, great from Merrick and Julie Pinny as her conformation and is a beautiful reserve interbreed champion. The meat pig,” said judge Mr Matthews. January born lamb was handled Reserve went to Berkshire in the ring by the couple’s son sow Tentrees Suzanne from Eykes Andrew. It was first time out for the Herd. This one was described by home-bred lamb but the family the judge as having “really good have had show-ring success over conformation, a cracking underline the years having won Suffolk breed and really good on her feet”. ■ champion two years ago with a

New conveyor for feeder wagon Strautmann has introduced a new design of discharge conveyor for its Verti-Mix feeder wagons. Specifically adapted to dispense feed over a feed barrier or into a trough, the new V conveyor has been simplified to reduce the number of moving parts to help extend belt longevity, therefore reducing ownership costs. The V Conveyor has one continuous PVC unloading belt which, in addition to being able to discharge to both left and right, can be set by the operator to increase discharge height by up to 55cm, as well as providing a side shift of approximately 25cm.

Twin hydraulic motors provide drive for the conveyor, and pivoting deflectors at each end ensure material is channelled in the correct direction. These swing into place automatically when the belt changes direction and do not require an additional hydraulic or electric function to operate. All Strautmann Verti-Mix diet mixers feature the Vario2 stepped auger which tumbles the constituents, producing a fluffy homogenous mix faster. ■ The new simplified design of the Strautmann ‘V’ Conveyor has fewer moving parts to reduce ownership costs.

144 www.farmersguide.co.uk July 2019

132-228 July.indd 144

24/06/2019 15:19

Livestock

Royal Bath & West Show

The Aberdeen Angus Breed Championship went to Temple Farm (Chedzoy) Ltd, Bridgwater, Somerset for its lovely homebred five-year-old cow Temple Lollipop.

Controlling docks between silage cuts Grassland farmers may need to tackle dock infestations in silage fields in the next few weeks, as the early spring led to first cuts being taken before these tough perennial weeds could be treated. Where docks are present, weed control is a small cost relative to the gain in extra grass and silage produced. “After last year’s forage shortage it is understandable that farmers were keen to get started on their silage, but this gave little chance for any weed control early on,” says, weed biology specialist with Corteva Agriscience weed biology specialist Dr Nicola Perry. “But it is not too late. Spraying with a modern translocated herbicide, like DoxtarPro (fluroxypyr + triclopyr), two to three weeks after first cut, will catch the weeds with rosettes of fresh green leaves and when they are all of a similar dinner-plate size, which will ensure good spray coverage. “There will also be less grass growth around the weeds, so it will be easier to hit the target plants when spraying. DoxstarPro should be applied at a rate of 2-litres/ha in 300–400 litres of water, unless low drift nozzles are used, when water

Spraying docks in silage leys three weeks after cutting means they are at the perfect stage for treatment.

rates can be reduced to 200-litres/ha,” she explains. “Many livestock farmers now employ contractors to carry out spray operations, as they will be fully certified to do the job and have the latest machinery. This means the farmer needs to plan ahead to the next silage cut and work back to the date he needs the contractor, and book him in.” If the silage field has a wider spectrum of weeds growing in it, the Pas Tor Agronomy Pack (fluroxypyr + clopyralid + triclopyr) offers a good solution. It gives excellent control of thistles and nettles, as well as docks, adds Corteva. ■

PROTECH MACHINERY

EVO1 120o slew extending track Stand 921

The Interbreed Sheep Championship was won by this Charollais ewe from Gerald Burrough of Honiton, Devon.

Centre post frame

Wire unroller with drop down hinge

Front post frame • 300kg hammer • 75mm dia rock spike and extractor kit • 1m tele mast extension, max working height under cap 3950mm • 500mm sideshift • 2 way mast tilt • Transport position • 48hp Yanmar engine • Poclain transmission • Hydraulic mast leg • 1.6m outside track width • 400mm wide tracks • 500mm track extn so 2.1m outside track width • Foot stand and tow bar • 60 or 120 deg slew

tow bar

• Ignition • High & low speed tracking • Full rear controls • Electric throttle switch • Servo tracking controls OTHER FEATURES INCLUDE... • Post driver controls • Lowered rear idler for increased contact area, • Park brake and emergency cut off sealed bearings in all undercarriage running gear • Auger drive with auto drill function • Wire unroller with drop down hinge for easier loading of larger rolls • Auger sizes up to 250mm dia

Caroline Wheatley-Hubbard from Boyton Farm Ltd, Warminster, Wiltshire won the Interbreed Pig Championship with her Tamworth gilt. Pictured here (l-r) are Show President Earl Bathurst, Judge Ann Uglow, Caroline Wheatley-Hubbard and sponsor Ben Carter from Old Mill.

Andrew 07971 079751•Steve 07974 956716 PROTECH MACHINERY LTD

Vis it o fu ur w ll p e rod bsi uc te t tr os an ee ge ou r

FOR PROTECH SALES PLEASE CALL

Woolridge Farm, Gloucester Road, Hartpury, Gloucestershire GL19 3BG British Built at Unbeatable Prices

e-mail: sales@protechmachinery.co.uk www.protechmachinery.co.uk

63597

July 2019 www.farmersguide.co.uk 145

132-228 July.indd 145

24/06/2019 16:44

A. DOWNING

Specialist Agricultural Spraying Contractor

AGRICULTURAL ENGINEERS & MACHINERY TRANSPORT

66322

FOR ALL YOUR SPRAYING REQUIREMENTS Suspension Fertiliser & Avadex application available now To discuss the above please contact

Philip Clarke 01728 688360 or 07850 710996

Carlton Farm, Cattle Dyke, Gorefield, Wisbech, Cambridgeshire PE13 4NR UK NATIONWIDE EUROPEAN Tel: 01945 410099 • 07850 731409 www.adowningengineers.co.uk LOW LOADER SERVICES

EC Farm Contractors Mobile Concrete

Crop Spraying Specialists

Crushing

Established for 25 years

or e-mail: Plunkettsb@aol.com

65232

GM Plant

Gary Moores 13 ton excavator/operator All machine work undertaken

Gary.Mooresmoores@btinternet.com

65204

07889 570 210 01832 281 578

65762

JAMES P DIXON Ltd

Grassland Services Arable Services Hay, Straw and Haylage Bought and Sold South Essex based

loading services available please call for a quote

07823 555210 RS

• Solid Digestate • Lime/Limex • Vegetable Waste • and many more...

R FA

Contact Matthew on 07971 484710 Based in mid Norfolk

John Deere 6155R tractor with front linkage and GreenStar Kuhn combi drill 3m Fertiliser spreading 24 and 36m Ploughing Cultivation with Kuhn Cultimer 3m

A YE 30

High capacity disc spreader running low ground pressure tyres, John Deere Autosteer GPS and accurate weighing equipment for precision application of all products, with the option of variable rate application based on a predefined map

• All Farm Yard Manures • All Poultry Litters • Sewage Cake • Compost

Loading and spreading service to apply:

Aylsham Norfolk

M. P. HARROLD

L Farmer R Warren & Son and Contractor

66357

Bale Wrapping – round or square

65650

www.greencropforage.co.uk

based near Peterborough

65831

www.ecfcfarms.com

Nationwide Bulk Haulage & Machinery Haulage

Hay and Haylage Making – 80x47cm 'Euro' baler

07811 125312

AGRICULTURAL WORK DITCHING PONDS HEDGE FLAILING www.Gmplant.co.uk

ewcrocker@aol.com

Office: 01728 627788

Simon Oliver mobile: 07860 207166 www.crushertrucks.co.uk Agricultural Contractors & Forage Merchants

Great Dunmow Essex CM6 1WN

66418

Unique self-contained, self-loading machine working in Suffolk/Essex/Norfolk

07768 383797

Edward Crocker

Recycling your waste concrete on your farm/site to give you a valuable end product. No minimum quantity

66215

Call Andrew on 07980 155042

146 www.farmersguide.co.uk July 2019

132-228 July.indd 146

25/06/2019 11:50

Contractors 66417

Established since 1956 - based in Cambridgeshire

G C DIXON AND SON

www.gcdixonandson.co.uk

Facebook: G C Dixon and Son

AGRICULTRAL CONTRAC TORS Covering all arable operations, including: n Heavy / light cultivations n Mole draining n Drilling n Rape drilling n Spraying n 24m Avadex application n Rape swathing n Combining n Mowing / tedding / raking n Baling and chasing n Hedge cutting o n 360 digger work Wheat, barley and rape straw wanted in the swath

For more information on our stubble to stubble and full farm contract options, please contact: DAN 07831761157 or NOEL 07702341374 EMAIL: info@gcdixonandson.co.uk

WASTE TYRES John Warne FARMER/CONTRACTOR

Farms, Agricultural Contractors, Plant Hire & Earthmover

TRACTOR & DRIVER FOR HIRE

25 years’ experience in used tyre disposal Registered Environment Agency Waste carrier/collector National bulk collections in articulated trailers Mixed tyres accepted Forklift and plant tracks accepted Competitive prices • Excellent service

Ring now for this season’s work Claas Quadrant 5300 – new for this season 120 x 90 x 250cm bales Carted if required Big Bale Transtacker 6072 bale chaser

For free estimate and quote contact

Chris Ingram – Intowaste Ltd

07860 670 201

John

Call on 01284 828240 or 07986 548621

email chris@intowaste.co.uk www.intowaste.co.uk

Bury St Edmunds, Suffolk

66419

J. C. Contracts

66545

Agricultural Contractor Contact: Peter 07944 272 762 peterbowers6@gmail.com

65225

P. BOWERS

of Removal

360º Digger work • Specialising in Ditching & Coppicing (shear & grab) Cuts & holds 14” diameter wood Hedge Cutting

ION

• C T E S O L I TAL • BINS & S

OLIT M E D r ings fo d l i u B m

N P ME R A R O C C S • • E RES • SITE CLEARANC O T S N I A GR AGE

es All Typ

of Far

T N A • SALV D E T N E R U C D N O C • RE MOVAL • OS RE T S E B S A •

65768

Office:

01379 855005

A W Rusling

Email: jrcally@aol.com

Mobile:

07771 706077

65773

Agricultural Contractor

MAN WITH HIS OWN TRACTOR

New Holland c/w front linkage & PTO, RTK guidance, wide tyres & a set of row crops 18 years experience in... • veg crop harvesting • cereal drilling • potato planting • land preparation • cultivating • trailer work • hedgecutting • harvesting

Call Andy

Enhancing your environment... ...exceeding your expectations www.cgmltd.co.uk

0800 160 1199

66412

01366 388738

• Flailing & Hedge Trimming on river banks, reservoirs fields & margins • Circular Saw Attachment available • Control of In-Channel Weed and River System weed cutting and clearance • Identification and Control of Invasive Species • Supply of Waste Containers and Skips • 360o Earth Moving & Clearance with long reach & tree shear capabilities • Tree Felling & Maintenance & stump clearance • Haulage of Equipment & Machinery with Hiab capability

COMPETITIVE RATES

07768 435505

Reed House • Karoo Close • Bexwell Business Park • Downham Market • Norfolk • PE38 9GA

July 2019 www.farmersguide.co.uk 147

132-228 July.indd 147

25/06/2019 11:51

66325

A.E. Kiddy & Son

65764

• LGP 12/24m spraying & liquid fertiliser application with GPS • Claydon drilling – all combinable crops, cover crops, forage crops, etc • Grassland operations/paddock maintenance • Telehandler with operator • Tractor with operator – 160hp, wide tyres, GPS steering Please phone Edward to discuss

AGRICULTURAL SERVICES across East Anglia including…

07767 167821

Covering Halesworth and surrounding areas

Hill House Farm, Bath Road, West Dereham, King's Lynn, Norfolk PE33 9TP

John H. Howlett

66321

Agricultural Contractor

■ Full farm contracts ■ 24m spraying & 24m fertiliser spreading ■ Muck, Limex 45 & 70 and lime spreading ■ Set aside topping ■ Combining and all cultivations

• Hedge and woodland coppicing with excavator and tree shear/grab • Poplar and large tree dismantling with high reach material handler and grapple saw • Timber extraction and purchasing • BSL registered supplier of dried and screened virgin woodchip • Wood fuel chipping to G30, G50 and CHP specs

rs D ving• wGild bird cove ling a e W l l s i il zeroants • cover crop gar beet dr e u b s o l a Rt ng from OS conventiovner maize drillit if required n / o e l c l game iliser placem min ti fert ith

both w

66323

www.collinsfarmingandforestry.co.uk

G N I L DRIL

L or e

Andrew 07860 262196 Hill Farm, Wissett, Halesworth

66290

lor y a T n Steve9 047288 079387 21035u0k 017 farm.co.

gers ex jht@ro Suffolk/Ess

66415

Collins Farming & Forestry Services Ltd

07798 708843/07771 568754

www.gloveragriculture.co.uk

Contractors

T. M. Matthews

STRAW WANTED Norfolk & Suffolk

65775

PROMPT CLEARANCE & PAYMENT ALL SIZED BALERS AVAILABLE FOR CONTRACT WORK PROUD TO SUPPLY LIVESTOCK FARMERS

07850 988 808 01728 660 271 info@collinsfarmingandforestry.co.uk

Cherry Tree Farm, Cherry Tree Road, Tibenham, Norfolk, NR16 1PJ

Tel: 01953 861361 | 07860 865435 Harry 07734 858878 | Claire 07778 703010

www.timmatthews.co.uk

Valley Farm, Saxmundham, Suffolk IP17 2LR

D. E. KEEBLE T. G. ASKEW Agricultural Contractors

Suppliers of the finest hay & straw: Big Hesston, Mini Hesston & Conventional Bales

Brundish Road, Wilby, Eye, Suffolk IP21 5LR

www.tgaskew.co.uk

01235 850678•07825 176567

philipthacker1@gmail.com

Lime Spreading Fibrophos Variable rate fertiliser GPS mapping Oxon • Berks • Bucks • Hants • Wilts

PHILIP BAUMBER Agricultural Contractor For high quality results and prompt service

Scopwick, Lincolnshire 01526 322654 and 07976 550635

Baling, Stacking & Delivery Service

Sugar Beet Drilling Combi Drilling Muck Spreader Hire New Bunning Mk4 180 24m Spraying Set-aside Topping General Farm Contracting

65221

BEHIND COMBINE

Straw Spreading for Winter Carrot Cover Muck & Sludge Spreading Hedge Cutting / Flail & Saw

Tel: (Snape) 01728 688688 Mobile: 07889 642096

email: lindakeeble@btconnect.com

www.dekeeble.co.uk

66324

Bulk Haulage • Aggregate • Road Planings Stock Feed • Equestrian Rubber Chip & Silica Sand, Bark & Energy Chip • Farm Track Repairs For further information please contact us on Tel: 01379 388156 • Fax: 01379 388109 Email: chris@tgaskew.co.uk 65211

148 www.farmersguide.co.uk July 2019

132-228 July.indd 148

25/06/2019 11:52

News

Top apprentices graduate A total of 31 young service technicians have formally graduated from the latest John Deere Ag Tech and Turf Tech advanced apprenticeship programmes, which are run in partnership with national training provider ProVQ at the purpose-built John Deere Apprentice Training Centre in Radcliffe-on-Trent, Nottinghamshire. Apprentice of the Year for 2018 was Henry Smith of Cornthwaite Agricultural in Ormskirk, who received a crystal plaque, winner’s certificate and a John Deere tool kit worth £500. The runners-up were Martyn Burnett of HRN Tractors, Insch and William Storr of Rea Valley Tractors, Sudbury, who each received a certificate and high street vouchers worth £250. The annual apprentice graduation ceremony was held at the East Midlands Conference Centre. These awards are based on the trainees’ consistently high standards of work, both at their dealerships and at the training centre, over the three years of the apprenticeship. In addition, all central government

John Deere’s latest qualified Ag Tech and Turf Tech apprentices, with training centre manager Allan Cochran and managing director Jonathan Henry, at the 2018 graduation year presentation ceremony in Nottingham.

approved apprenticeships in England now require an end-point assessment, over and above the log of work progress that was kept for each apprentice before last year. The majority of the 2018 graduates were therefore the first John Deere technicians to qualify under the new EPA rules. “With the new EPA tests, which were held at Langar in April, both John Deere and our dealers are now able to quantify more effectively the skills of the apprentices we are training,” said John Deere training centre manager Allan Cochran. “An EPA pass mark of above 90 per cent was required to earn a distinction and well over half the apprentices we tested achieved this, which was well above our initial expectations, so we have got off to a great start with these new assessments.” John Deere’s three-year Ag

Tech and Turf Tech and two-year Parts Tech apprenticeships involve students being trained in engineering, electronics, hydraulics, diagnostics, communication skills, computing, sales and marketing. The programmes lead to IMI Level 2 & 3 Diplomas in Landbased Engineering and Vehicle Parts Competence, and registration at LTA Intermediate level in the industry’s Landbased Training Accreditation scheme. In subsequent years qualified technicians undergo further

education and adult training within the John Deere University programme, on a career path that can ultimately lead to the highest possible LTA Master Technician accreditation. New student intakes are in September each year. Apprentices need to be resident in the UK, sponsored by a John Deere dealer and aged 16 or over. The standard programmes include on-the-job training and assessment as well as eight weeks each year at the John Deere Apprentice Training Centre. ■

New forager makes its show debut John Deere’s new 8600 selfpropelled forage harvester with three-in-one HarvestLab constituent sensing for use on the forager, in the clamp or with a slurry tanker made its Royal Highland Show debut at the Ingliston showground. Launched together with the new high-capacity 9000 Series range for the 2019 season, the updated John Deere 8600 self-propelled

forage harvester tops the company’s range of standard crop channel models from the 8100 to 8500. Its introduction has been driven by the market demand for more power, more efficiency and more productivity in self-propelled foragers with a transport width of less than 3m. ■ The new 8600 self-propelled forage harvester.

PART OF YOUR INTEGRATED STRATEGY FOR BLACK GRASS CONTROL

DIRECT DRILL ESTABLISHMENT USING LOW-DISTURBANCE JOHN DEERE 750A DRILL We’ll establish your autumn and spring crops including Avadex application Call Kris Grzelak on 07932 107631 July 2019 www.farmersguide.co.uk 149

132-228 July.indd 149

25/06/2019 16:13

Henry Brown’s Vintage Diary

Farmers Guide 25 Years Ago

The BMB President British Motor Boats Ltd, originally based in London and later at Crossens near Southport, was importing the Simplicity HoeMate, Cult-Mate and Plow-Mate two-wheeled garden tractors from America in the 1930s. Brockhouse Engineering bought British Motor Boats in the mid-1940s and the first British-built pedestrian-controlled BMB tractors were made at Crossens in 1947. The three models; the 1hp Hoe-Mate, 3hp Cult-Mate and the 6hp Plow-Mate were made until the mid-1950s. Farm Facilities at Slough used the BMB Plow-Mate engine and transmission for the threewheeled ride-on Gunsmith tractor it introduced in 1948. The 4-wheel BMB President, launched in 1950, had an 8/10hp Morris 4-cylinder petrol engine which could be converted to run on TVO. The specification included electric starting, a 3-forward and 1-reverse gearbox with a top speed of 8mph, independent rear wheel

brakes and adjustable track width. The President had a £239 price tag but PTO, belt pulley and hydraulic linkage or a hand lift tool bar were optional extras. Sales literature sang the praises of the President’s wasp waist which gave excellent visibility for rowcrop work, however the six month warranty period excluded hiring out, racing or speed testing! The last BMB Presidents were made in 1956 but the similar Stockhold President, with a twin-cylinder, 14hp Petter engine, made by HJ Stockhold of London, appeared at the 1957 Royal Smithfield Show. ■

The BMB President, first seen at the 1950 Royal Show, was made for six years.

Vintage tractor collection to go under the hammer Vintage tractor collector Bob Parke is selling his extensive collection including some rare examples. One of the more notable items is a dual Massey-Harris 55D. This particular dual conversion was performed by an agricultural engineer in the town of Geraldine in Montana. The tractor itself is unique in the UK and is one of just 19 conversions that were carried out in total. It is unclear how many of the original conversions have survived. The rare dual Massey-Harris

55D will be for sale as well as more than 50 other vintage tractors and combines from Mr Parke’s collection along with vintage implements, stationary engines, mowers, spares and workshop tools in Norfolk on 7th September. There is also an extensive collection of scale Massey-Harris models and memorabilia, and Massey-Harris literature that will be for sale online from the 24th August. Brown & Co of Norwich will be running both sales. ■

Items from Bob Parke’s vintage collection including the rare dual Massey-Harris 55D.

150 www.farmersguide.co.uk July 2019

132-228 July.indd 150

24/06/2019 15:22

July 1994 Farmers Guide included an article on recent developments in satellite systems for farm tractors. Accurate results had been achieved with combine and harvester yield mapping systems over a period of 10 years and the next stage, using a yield map to vary application rates in different parts of a field with a sprayer or fertiliser distributor, had been achieved by Massey Ferguson. Ernest Cozens reported that Eastern Counties Farmers plc, once the largest farmers’ co-operative in the UK with 1,200 members in its heyday, had called in the receivers and shareholders were unlikely to receive any payment. With a growing interest in biodiesel fuel for farm tractors, United Oilseeds was looking for farmers to grow oilseed rape for its planned biodiesel fuel plant. Organisers of the East of England Show announced they were going back to basics with an innovative agricultural trade area for those involved in the farming industry. The area would concentrate on

management and computer systems, grain sales and combinable seeds including set-aside crops. On the machinery lines Merlo, a recent newcomer to the UK, planned to exhibit three new telescopic handlers, there would be special offers on Belarus tractors and GT Bunning was adding a new model to its Lowlander range of muck spreaders. The 1994 Suffolk Show had enjoyed sizzling heat and a record attendance. It was the last show organised by the Association’s retiring secretary John Hargreaves, and Len Tuckwell celebrated 40 years in the farm machinery business. His first sale in 1954 was a second hand Ferguson TE20 tractor and plough for £30. At the forthcoming Royal Show, four of the five main UK tractor makers including the returning Case IH would be exhibiting, JCB was launching a new telescopic handler and a new 170hp Fastrac, and Gregoire Besson was showing a range of 2–14f ploughs. In Machinery News, Overum was, for a limited period, offering a Flymo lawn mower, a dishwasher or a Husqvarna chain saw with the purchase of a 3–7f reversible plough. Lemken UK had merged with Howard GB to form Lemken Tri-Ag and would market Lemken Howard and Nordsten products in the UK. Amazone announced a 6m linkage-mounted grain drill with an all-up weight of 5.5t and a £59,000 price tag. Claas introduced two new self-propelled forage harvesters with 414 and 503hp engines, and Massey Ferguson dealer Thurlow Nunn Standen had increased its trading area with the take-over of two Cowies dealerships. ■

13–14 July Cheshire – Steam Fair at Daresbury, Warrington WA4 4AG. www.outdoorshows.co.uk/cheshire-steam-fair/ 13-14 July West Sussex – Wiston Steam rally at Wiston Park, Steyning BN44 3DZ. www.sussexsteamrally.co.uk 19-21 July Suffolk – Weeting Steam Engine Rally and Country Show at Fengate Farm, Weeting IP27 0QF. www.weetingrally.co.uk 20 July Cambridgeshire – Cheffins Vintage Sale at Sutton, near Ely CB6 2QT. www.cheffins.co.uk 26-28 July Worcestershire – Welland Steam & Country Rally at Woodside Farm, Welland WR13 6NG. Auction on Friday. www.wellandsteamrally.com. 28 July Suffolk – The Kettle Autojumble at Church Farm Kettleburgh, near Woodbridge IP13 7LF. Tel 01728 724858 before 9.30pm.

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

Farmers Guide Place your

FREE advert

ONLINE or in the MAGAZINE

farmads.co.uk

Through www. To Fax or Post, see coupon on Page 226

Deadline for inclusion in the August 2019 issue is 18th July 2019

Buy and sell online — www.farmads.co.uk

www.ibbetts.co.uk 01480 473452

S N O I T O M O R P L A I PRE HARVEST SPEC

All prices ex VAT

ex-demo, 170hp, powershift transmission 30F/15R gears, 50kph, front axle suspension, fitted with front PTO/linkage, loader ready, 2018 68 plate, 145hrs ex stock

Kubota DM2028

plain disc rear side mounted mower, 2.8m cutting width, 8 discs with 3 quick change blades, fitted RH swath board, nonstop breakaway, 35o working angle, up & down slopes, 540 PTO drive shaft, headland lift as standard, ex demo machine

£88,800 Please call Graham

Kubota M5111

110hp, 2/4wd, fitted quick release front loader, new stock

£6,995

Garrick Kubota Specialist 07739 091366 agsales@ibbetts.co.uk

£44,000

Arthur Ibbett Ltd • River Lane • Great Paxton • St Neots • Cambridgeshire • PE19 6RD

66517

Kubota M7172

PETER JOHNSON AGRICULTURAL ENGINEERS LTD

01379 384488 Ashfield Green • Stradbroke • Eye • Suffolk • IP21 5NL

SCHÄFFER

66513

Main stockist for the South East with 25 years experience in Schäffer machines supplying...

DEMONSTRATIONS

NEW MACHINES

SERVICING

PARTS

July 2019 www.farmads.co.uk 151

fg_class_july_19.indd 151

27/06/2019 10:40

FORTHCOMING AGRICULTURAL SALES

FORTHCOMING AUCTION

Monday 8th July 2019

CAMBRIDGE MACHINERY SALES Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

The Saleground, Sutton, Ely, Cambs, CB6 2QT

Tuesday 6th July at 10.30 am

Dispersal Sale of Tractors, Farm Machinery & Equipment

Categories Include: • Tractors • Telescopic Handlers • Excavators • Digger Loaders • Vehicles • Cultivators • Ploughs

• Hay Making Machinery • Balers • Combine Harvesters • Forage Harvesters • Livestock Requisites • Trailers

• Small Plant & Tools • Generators & Electrical Items • ATVs • Horticultural Machinery • Wheels & Tyres • Spares

Further Entries Invited For further information please contact our auction team.

cheffins.co.uk

machinery@cheffins.co.uk

01353 777767

At North Green Farm, Stoven, Beccles, NR34 8DG On instructions from The Executors of Mr S Thompson Deceased and Others 19 Tractors: 12 Tractors from the Estate MF 6290 (4WD) (01), MF 698 (82), MF 298 (86), MF 590 (77), 2x MF 135’s, MF 35X (63), John Deere 2120 (69), Muir Hill (74), Nuffield 10/60, Fordson Major E27N P6, Fordson Super Major. Together with: MF 50B Digger (76), NH 8060 Combine (81), Salev Forklift (77), Richard Western 14T Grain Trailers. Plus further trailers, cultivation equipment and sundries. Also an Austin A70 Hereford (52). From included vendors: 7 Tractors: MF 135 (77), Case 500 (55), Fordson EIA Major (53), International BTD8 (60’s) International B250 (56), International B450 (64), Fordson Super Major (62), Together with: Hesston 4900 Big Baler, Claas Dominator 85 Combine (79), Tecnoma Mounted Sprayer, etc.

Catalogue Available Online Enquiries to: nicholas.rudge@durrants.com or scott.parke@durrants.com T: 01502 470427 66427

www.durrants.com

THAME FARMERS AUCTION MART LTD SHEARWELL THAME SUMMER SHEEP FAIR 2019

YORK MACHINERY SALE APPROX 5000 LOTS

ENGLANDS LARGEST BREEDING SHEEP SALE THURSDAY 1ST & FRIDAY 2ND AUGUST 26,000 PLUS HEAD: EWES, SHEARLINGS, LAMBS & RAMS CATALOGUS AVAILABLE FROM 17TH JULY

14th VINTAGE & BYGONE SALE

IMPORTANT FARM DISPERSAL SALES

Entries close: Monday 29 July

THURSDAY 22ND AUGUST – VINTAGE FARM MACHINERY, DUNSTABLE THURSDAY 19TH SEPTEMBER – ARABLE & LIVESTOCK MACHINERY, WHEATLEY THURSDAY 26TH SEPTEMBER – ARABLE & LIVESTOCK MACHINERY, HOOK NORTON

TRACTORS; TELEHANDLERS; FORKLIFTS; DIGGERS; LOADING SHOVELS; DUMPERS; PLANT QUADS & ATVS; 4x4 VEHICLES; AGRICULTURAL MACHINERY; GROUNDCARE & HORTICULTURAL

FOR MORE INFORMATION & ENTRY FORMS PLEASE CONTACT THE MARKET OFFICE

www.thame-market.co.uk

01844 217437

NEXT SALE:

WEDNESDAY 7 AUGUST with main section for

Bid and follow the auction online Register at www.i-bidder.com

66372

Murton – York – YO19 5GF Tel: 01904 489731 Fax: 01904 489782

152 www.farmads.co.uk July 2019

fg_class_july_19.indd 152

27/06/2019 14:15

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

TOMLINSON

PAPWORTH

01284 771344

VEHICLE AIR CONDITIONING

www.mkmagri.com

GROUNDCARE

63709

03-66336

AIR CONDITIONING

Gator Main Dealer

SALESSERVICESPARES

The ATV & UTV Specialists

Tel: 01522 246 522 James Richard 07764 511257 07860 575155

We stock:

01-66294

R134A .................................. POA Air conditioning service equipment •leak detectors •vac pumps •recovery machines AIR CONDITIONING PARTS FOR ALL FARM & CONSTRUCTION VEHICLES AT DISCOUNT PRICES We accept all major credit cards

Tomlin tractor mounted 2 wheel, 2m, hay rake .....£750 no VAT Tomlin tractor mounted 1m drum mower .....£1,400 no VAT

01449 736060

2017 JCB 8018 CTS mini excavator, 598hrs, 1742kg, expanding tracks, twin speed tracking, hammer lines, blade with exts, orange & green beacons, w/lights, 75% tracks, 3 buckets, quick hitch, serviced £12,000

2017 JCB 8018 CTS mini excavator, 583hrs, 1742kg, expanding tracks, twin speed tracking, hammer lines, blade with exts, orange & green beacons, worklights, 75% tracks, 3 buckets, quick hitch, serviced £12,000

Groundhog GP360 towable anti vandal welfare unit, fitted with 6kva diesel generator, canteen/kitchen, toilet, hot water, heaters, plug sockets, lights £6,750

2015 Ingersoll Rand 7/41 140 CFM 2 tool compressor, 471hrs, Yanmar engine, fast tow £4,250

2015 Ingersoll Rand 7/20 compressor, 65 CFM, 2 outlets, Kubota engine, fast tow, lights £3,000

2014 SMC TL-90 tower light, 2804hrs, 9m hydraulic mast, 4x1000 watt lamps, x2 110v sockets, Kubota engine, fast tow, lights, serviced £2,800

2012 SMC TL-90 tower light, 2890hrs, 9m hydraulic mast, 4x1000 watt lamps, x2 110v sockets, Kubota engine, fast tow, lights, serviced £2,650

Buxhall, Stowmarket, Suffolk IP14 3DL

www.tomlinsongroundcare.co.uk 03-66428

Tel: 01954 267215

T Underwood & Refrigeration) Ltd

MONTHLY MACHINERY SALES

01-65972

ATVs/UTVs

01234 768889

www.mkmagri.com

The ATV & UTV Specialists

SPARES & SERVICE

Manor Farm • Ixworth Thorpe Bury St Edmunds • Suffolk • IP31 1QH

HONDA TRX500FA quad bike, red, full auto, 2012, back box ﬁtted, good nobble tyres, vgc, used for soil sampling in East Anglia, photo on request. £3,500 inc VAT. C Long Tel 01502 561657 (Norfolk)

NEED PARTS?

www.thequadcentre.com info@thequadcentre.com

01271 320727 03-66377

every 2nd Tuesday

Largest weekly horticultural sale in UK Largest sale of produce in UK Roy Waller 07774 995969

www.ashleywaller.co.uk

BALERS & BALE HANDLING INTERNATIONAL B45 baler, stored under cover, from small farm, hasn't been used for a few years. D Felkus-Upton Tel 07813 553629 (Suffolk) LAWRENCE Edwards round bale squeezer, twin roller type, Euro brackets, good condition. £495+VAT. I Senior Tel 07887 543683/01494 482228 (Bucks) LISTER bale elevator, Briggs & Stratton engine, stored undercover. No sensible offer refused. J Turner Tel 07801 419504/01494 862348 (Bucks)

03-66429

FOR ALL

PARTS

SPARES & SERVICE

Sun Valley Works • Wood End Marston Moretaine • Bedford • MK43 0NJ

POLARIS Ranger 570 EFI, 2 seater, windscreen, doors, towbar, only been used for light duties. £6,500 no VAT. G Flux Tel 07879 413422 (Suffolk)

uide

G Farmers

o.uk

rmads.c

www.fa

RECYCLED AGGREGATES

MATERIALS AVAILABLE TODAY!

BIG Bale grab, 5 rows of tines,

JCB headstock. £400. T Carr Tel 07514 015654 (Essex)

COMPETITIVE RATES

COLLECTION OR DELIVERY

FOR SALE

Andy White RAND Mark James ALREWAS Kevin Lunney THATCHAM

FOR ORDERS OR ENQUIRIES CALL

07795 378562 07785 515308 07798 585067

andrew.white@tarmac.com mark.james@tarmac.com kevin.lunney@tarmac.com

NATIONAL ROAD PLANING LTD

64575

63803

ur For all yoIED TRADE CLASSIFISING contact... e.co.uk ADVERT • samantha@farmers3gu6id94455

SON 0147 ide.co.uk SAM WIL mersgu 6 nicki@far • S R E 73 69445 T A 4 1 W 0 I K C I or N

nationalroadplaning.co.uk

ROAD PLANINGS

www.thequadcentre.com info@thequadcentre.com

01271 320727

Please see website for more stock

www.richardbetts4x4.co.uk

Buy and sell online — www.farmads.co.uk

Cheshire SK11 9DU

ANT AGRICULTURAL PL G IN N IO IT AIR COND S SERVICE & REPAIR

07767 Ely8, Ca5mb4rid4ge6sh4ire

AUCTIONS

04-66511

charliepapworth@gmail.com

(Engineering

2018 JCB 535-95 telehandler, 1284hrs, 9.5m reach, 3.5t lift, joystick control, a/c, p/shift, 3rd service for grab etc, 4ws/2ws/crab steer, keypad, orange & green beacon, 90% tyres, balance of 2yr/4000hr warranty £39,500

HIREPARTSREPAIRS Over 30 years’ experience

BALE wrapper twin satellite

engine driven bale wrapper, please call for more info. £5,000+VAT. F Hardy Tel 07957 855180 (Notts)

Lexion & Dominator We supply the following new parts combine hire CONCAVES RASP BARS BELTS Fabrication & repairs KNIVES CHAINS FINGERS Breaking 100s of machines FILTER KITS

01926 614345

and many other wear parts

JMT Engineering (Ladbroke) Ltd

email: jmtengineering@btconnect.com • www.jmtcombinehire.co.uk July 2019 www.farmads.co.uk 153

fg_class_july_19.indd 153

27/06/2019 15:15

RUSSELL 56 bale squeezer, good tyres, barn stored, not been used for 2yrs. £500+VAT. T Thorne Tel 07703 541746/01525 221400 (Beds)

Now dealers for

Swineshead, Lincs

Economise Without Compromise BALERS & BALE HANDLING (cont)

HEATH QM Chaser 2007,

good condition for year, BKT Road Max tyres 60%m, head for 4x4 bales, good tidy machine. £34,500+VAT ono. A Worboys Tel 07801 122014/07785 572330 (Beds)

COOKS ﬂat 8 windrower bale sledge. £300+VAT. J Staight Tel 07761 631549 (Essex)

BROWNS big bale grab, Q ﬁt brackets. £995. H Brown Tel 07764 477766 (Cambs)

NH575 conventional baler, 1996, wide pickup, only done 60,000 bales, 1 owner, 100% genuine, barn stored, Worcs/Glos border. £5,500+VAT. W Cook Tel 01684 772688/07532 458044 (Glos)

BALE transtacker, Armstrong & Holmes, tandem axle, currently set up for ﬂat 10s, 13 high, (originally 15 high), might easily adapt to larger bale sizes, use hyds direct from tractor or has own independent pump, etc, gc. GDO Howell Tel 07903 089391 & 01728 723683(T) (Suffolk) CLAAS Rollant 625 round baler, barn stored, ready to go, good condition, c/w instruction manuals, net wrap & string, free wrapper to purchaser of baler. £1,800 ono. R King Tel 01277 899200 (after 8pm) (Essex) JOHN Deere 550 round baler, string & net wrap, absolutely immaculate. £3,000+VAT. K Wheatley Tel 07786 748957 (Suffolk)

2000, wide pick up, net wrap & string, 47082 bales, Bale Master control box, very good condition & ready to work, barn stored, more photos available on request. £5,000+VAT ono. M Osenton Tel 07956 102993/01634 250859 (Kent)

2013/14 (one owner) Master Cut 13 knives camless pickup 2.25m flotation tyres BC controls bale count 22450 serviced ready for work

£14,750 01354 694701 Nick 07802 850212 www.gledhillaccessories.co.uk

CLAAS 2100 square baler, 80x70, 2003, good order for age of baler. £8,500. A Lane Tel 07843 556790 (Glos)

FARMHAND 8 bale grab. £400+VAT. G Kemp & Partners Tel 01379 783608 (Suffolk)

POA

2017, 8871 bales, bale stop, LED lights

Call Paddy 353910 P J Reed 07768 FLAT eight bale grab with Euro hitch, stored under cover. £200+VAT. G Butt Tel 07885 407137 (Essex)

gledhillaccessories@gmail.com

COOKS Flat 8 bale sledge.

MAJOR ﬂat eight bale sledge, stored under cover. £200+VAT. G Butt Tel 07885 407137 (Essex)

£350 no VAT. R Burt Tel 07801 862062 (Northants)

New JM round baler soft handlers

£1,150

HEATH trailed 10 Hesston bale

chaser trailer, on twin axle 22.5 tyres, very genuine & ready to go, can deliver. £16,000+VAT. R Lane Tel 07831 615912 (Cambs)

TIMIK Transtacker, will pick

COOK ﬂat 10 bale accumulator (automatic), type F10A, side wings fold over for narrow transport, gc. GDO Howell Tel 07903 089391 & 01728 723683(T) (Suffolk)

NEW Holland Hayliner 370, small bales, vgc. £3,000+VAT. D Steele Tel 07872 837410/01775 630256 (Lincs)

JCB Q Fit brackets

IN STOCK www.jmurrell.co.uk Tel : 01493 750999

up & transport any size pre stacked big bales, eg 18 mini Hesstons or ﬂat ten/ﬁfteen small bales, c/w fast tow tyres & heavy duty swivel ring hitch, gwo. £2,750+VAT. P Forman Tel 07971 167795/01507 343669 (Lincs)

JOHN Deere 590 round baler,

FARMHAND ﬂat 8 bale grab, JCB brackets, plus Cooks Flat 8 windrow sledge, 56 bale carrier, available separately or together. R Loades Tel 07769 552541/01986 798264 (Suffolk) BROWNS Flat 8 bale grab, Tanco brackets, could be changed. £375+VAT. J Turner Tel 07801 419504/01494 862348 (Bucks) HOWARD Big Baler bale squeezer Farmhand F12 brackets. £250+VAT. J Turner Tel 07801 419504/01494 862348 (Bucks)

5 Bale Accumulator

twin spool satellite trailed round bale wrapper, 2006, c/w electronic joystick control & operator's manual, has been used this year. £3,250+VAT. N Osborn Tel 07885 625416/01444 461976 (W Sussex)

COOK ﬂat 10 bale grab, opposing tines model, type FG10DA, Sanderson brackets - easily change, gc. GDO Howell Tel 07903 089391 & 01728 723683(T) (Suffolk)

Contact Chris 07805 871984

ParkLand 455

VICON BW1800 high speed

NEW Holland BB940 Cropcutter, tandem axle, nice tidy baler. £15,500. J Dennis Tel 01647 245535/07967 442373 (Devon)

20,000 bales, v good condition, c/w remote control kit

05-66540

01205 821313|07769 353826 cloverfarmservs@aol.com cloverfarmservices.co.uk

TAARUP Westmac swath chopper, 2m working width, good working order, heavy duty machine. £450+VAT. P Riddleston Tel 07470 063643/01787 210732 (Suffolk)

05-66383

SALES SERVICE REPAIRS MACHINERY TRAILERS POTATO EQUIPMENT

GLEDHILL ACCESSORIES

Welger RP245 baler

05-66606

05-66430

60328

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

in Lincolnshire

Tanco 1400 EH Autowrap 2015

CASEIH LB333 baler, 80x90

bale size, 2009, very low bale count, vgc, auto lube, hyd bale eject & chute, knotter fans. £26,500. L Rich Tel 07774 112211 (Glos)

WELGER RP520 Master round baler, can be seen working. £4,500. B Clarke Tel 07799 881727/01953 857406 (Norfolk)

KV Taarup Pro 7664 wrapper,

wraps any square & round bales, vgc, owner driver from new, always barn stored, great, fast machine. £12,500. L Rich Tel 07774 112211 (Glos)

154 www.farmads.co.uk July 2019

fg_class_july_19.indd 154

27/06/2019 15:25

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

G & J Peck Ltd SPALDING – TEL 01775 724343 ELY (HEAD OFFICE) – TEL 01353 664515 RAMSEY St MARY’S – TEL 01733 844642

2017 CX8.70 FS COMBINE NOW £172,000

63840

Finance available on 1 + 2 annual payments at 0% 21025354 – 2016 New Holland T7.210 PC, FPS 29x12, creep gearbox, 40kph, Classic spec, 4 mech spools, Terraglide susp front axle/links, 8 LED worklights, 2 beacons .................................£59,850

Choice of 5 2016 T7.210 Power Command tractors, 50k with creep, hours from 3500...................................POA

NEW 2019 NEW HOLLAND COMPACT BOOMERS VARIOUS SPECS & MODELS READY TO TAKE HOME TODAY

PRICING STARTS AT £12,725 CONTACT STEWART BARNETT ON 07818 030552 FOR FURTHER INFORMATION

51023031 – Used Amazone ZA-M3001 superior spreader, c/w OM 24–36 discs .....................£5,450

41023849 – Ex demo Amazone Cirrus 6m trailed disc drill, grain only, Twin Tech+, Cat 3, serrated disc, elec half side shut off, tyre & roller scrapers, crush board, emergence markers, twin terminal Amatron 3 ..................................................£58,950

11024941 – Ex demo Amazone Cayron plough, 200v-100 (290hp), 5+1, S35 boards, rear disc, skimmers, Cat 3 bar, combi wheel, hyd vari width ....................................................................£24,500

EX DEMO SULKY 3M ZEOS PRO EVO DRILL NOW ONLY £29,900

Choice of 5 2016 T7.230 Power Command tractors, 50k with creep & front linkage, hours from 3500 ..........POA

41024437 – disc coulters, elec balance, cranked level tines, power harrow kit, pre-emergence markers, wheel scrapers, packer roller, level board, vert fold markers, pair eradicators

41023850 – Ex demo Amazone Cayros XMS 5-950 plough, 5 furrow, WXL 430 bodies, Cat 3 with balls, manure skimmers, transport wheel, hyd furrow, 500mm rear disc ........................................£11,950

NEW & EX DEMO

RABE ALBATROS 140 & CONDOR 150 Choice of 2 2016 T7.315 HD tractors, 50k Auto Command with full GPS, hours from 4500 .......................POA

AVAILABLE FOR IMMEDIATE DELIVERY

in furrow system, rated up to 300hp/350hp, 5+1/6+1 build, 93cm/90cm point to point, hyd front furrow, under beam clearance 80cm, mouldboard extn, vfd182b vari ﬁx skimmers, rear disc, d30m, combi wheel, 13.0/55x16 .............................................. Prices from £16,500

41022531 – 2016 Claydon 6m Terrastar stubble cultivator, c/w toolbars ...............................£11,950

51025356 – 2010 Amazone UF18M mounted sprayer, Proﬁfold 1, 210L/min pump, Amatron & GPS switch, completed 1600 hectares .......£11,000

Buy and sell online — www.farmads.co.uk

41024577 – Ex demo New Holland T6.175 DCT, 50kph, Terraglide axle, Dynamic Command gearbox, rear/auto PTO, AGR ready, hyd pump, 520/85R38 & 16.9x28 tyres, 319hrs ................POA

on up to £100,000 balance to ﬁnance* 9500L grain tank, yield & moisture monitor, Intellisteer GPS, Intelliview IV touchscreen, a/c, 6 row straw chopper/chaff spreader, 25' Gen II vari-feed header, RH side knife, tandem axle trolley, 800/70R32 & 500/80R28 tyres *G & J Peck Ltd is authorised and regulated by the Financial Conduct Authority to act as credit broker and will introduce ﬁnance, in relation to this offer, to CNH Industrial Capital Europe Ltd

31024993 – 2014 Amazone Pantera 4502, 4500L tank, 40m Super l boom, Proﬁfold II, 520/85R38 wheels, distance control, GPS switch/receiver, ﬁlters, beacons, reversing camera, front linkage ..................................................................£120,000

NEW OUT OF SEASON SPECIAL SULKY X40+ SPREADER 21025004 – 2012 Sulky/Brevi 220/XEOS Mek Farmer 220 power harrow with 550mm packer rollers c/w 4m XEOS disc drill (2013)........£14,500

41024434 – Hyd shut off fertiliser spreader EV2436 vanes, hopper extension to 600L, hopper cover with manual winder, left hand rear ladder, rubber mudguard ext, overlap kit, tribord kit.......... £8,500

21026247 – 2014 Amazone UF1801 24m sprayer, sus boom recirculation ...............................£18,000

FOR MORE INFORMATION PLEASE CONTACT STEWART BARNETT ON 07818 030552 OR VISIT OUR WEBSITE WWW.PECK.CO.UK July 2019 www.farmads.co.uk 155

fg_class_july_19.indd 155

27/06/2019 10:41

Ex demo Deutz Fahr 6165RC

165hp, RCshift, iMonitor, auto steer ready, top spec

£57,000+VAT

£76,000+VAT

140hp 4 cylinder, electric spools, front linkage

£9,875+VAT

Ex demo Deutz Fahr 6130

Eves: Daytime: 07831 or 07766

66480

Agricultural Machinery For Sale Cambridgeshire

158848 107610

Ex demo Deutz Fahr 6140

£59,000+VAT

Fiat 80-90 4wd excellent condition, 4950hrs, suit collector/user, K reg

John Deere 2720 4wd compact 119hrs only, as new, 61 reg, hydro

Massey Ferguson 135 2wd c/w loader, power steering, PUH, straight axle, tidy

Kubota RTV Gator power steering, hyd tipping back, full cab, road kit

New Holland LM430 telehandler Ag spec, air con, 6000hrs, arable use

Claas Dominator 86 combine tidy for age, chopper, 15’ cut, air con

Bateman HiLo 24m sprayer tidy for age, Deutz turbo engine, air con

John Deere 459 conventional baler 1997, very clean condition

McCauley low loader sprung drawbar, very tidy, one local owner

Ex demo Branson compact tractor 28hp, hydrostatic, turf tyres

FM2, power steering, manual gear shift

£4,500

Ex demo Honda Foreman 500

Renault horse box 1995 3 stalls plus living, 7.5 tonne

t: 01295 680711 m: 07860 809708

bruce@brucehopkins.co.uk • www.brucehopkins.co.uk

66422

130hp 4 cylinder, front loader

£5,900+VAT

Please see website for more pictures:

www.srhaylock.co.uk

Ofﬁce 01787 211701 Luke 07915 669007 sales@lbgmachinery.com

JCB 536-60 AGRI TELEHANDLER DEUTZ AGROTRON M620 4WD NEW HOLLAND T6.150 4WD TRACTOR MASSEY FERGUSON 5465 4WD JCB 520-50 FARM SPECIAL LOADALL 2014, 2634hrs TRACTOR 2015, 3710hrs, 50K TRACTOR 1998, 2675hrs .................................................£37,500 2010, 5900hrs, 50K........................ POA Electro Command .....................£37,500 2004, 3271hrs ..........................£22,500 .................................................£12,500

KRM BOGBALLE M2 TWIN DISC FERT HAY MOWERS AVAILABLE – LELY HIBISCUS 485T 4.85M SINGLE MAJOR 9’ GDX TWIN ROTOR TOPPER SPEARHEAD EXCEL 686 VFR 3PL SPREADER LELY SPLENDIMO, 320L, 280M, KUHN ROTOR HAY RAKE 2009, others available, HEDGE CUTTER 2003, hyd shut off.......................£2,250 GMD 55 .......................................... POA 2006...........................................£4,200 ﬂail & rotary ................................£1,850 2003, 6.8m reach, T-ﬂails ...........£5,750

FLEMING END TOW 4M FLAT ROLL AS MARSTON LYNX 14T HYD TIP EASTERBY 12T HYD TIP TRAILER TRIFFITT 14T HYD TIP TRAILER KUBOTA 1140 4X4 DIESEL RTV sprung drawbar, 10 stud 2012, 937hrs 2016 TRAILER sprung drawbar ...................................................£3,500 sprung drawbar...........................£5,950 ...................................................£5,750 commercial axles ........................£7,250 ...................................................£9,500

www.lbgmachinery.co.uk

63813

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Bruce Hopkins Ltd S.R.01799Haylock 584626

All prices + VAT Boxford Suffolk UK

156 www.farmads.co.uk July 2019

fg_class_july_19.indd 156

27/06/2019 12:15

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

Buy and sell online — www.farmads.co.uk July 2019 www.farmads.co.uk 157

fg_class_july_19.indd 157

27/06/2019 10:42

t: 01243 575333 • m: Joe 07540 013587 e: mail@ hjknight.co.uk • www.hjknight.co.uk

PUNCTURES?

64906

Our tyre sealants prevent up to 95% of all tread punctures No more costly downtime!

www.air-sealproducts.com

01823 674411

info@air-sealproducts.com

Agricultural building roof sheeting & cladding, new roofs re-roofs & repairs, guttering supply and fix or fix only COVERING EAST ANGLIAN AREA

Chris Wiseman

07917 509070 01603 464710 APPROX 1200 handmade red clay roof tiles, single nib, 10.5" x 6.5", ideal for restoring tudor or similar type roofs. 50p each. E Calcott Tel 01827 62265 (Staffs)

G, & forPhone a free FIN ING N brochur e O O D O R AD ATI ry cto L a L L C SU IA ime/F IN ATER /Non Pbrle files ents M l Prime availated Proequirem r ul ds ga • F econ orru own s x/C our y o • B ut to •C

PETER WRAGGE SUPPLIES Tel: (01449) 737192 Fax: (01449) 736666

08-63530

All prices + VAT

66243

at en A se M As LAM

www.peterwraggesupplies.co.uk

BALERS & BALE HANDLING (cont)

BEET EQUIPMENT

YORKSHIRE board, used, about 180 lengths 3m x 100mm x 19mm (10' x 4" x 0.75"), tanalised treated. £1.50/board. B Poulson Tel 07850 594925/01284 828371 (Suffolk) ELECTRICITY poles, ten @45', eleven @32', two @29'. £1/ft. N Ward Tel 07887 882171/01522 751159 (Lincs)

ROOFING MATERIALS galvanised and PVC coated steel corrugated or box profile first and second quality Non asbestos Big Six and Std 3in sheets, fittings and accessories

01622 832666 07939 114023

05-64884

£840 + VAT & Del

Soft Hands Bale Grab, round or square bales, heavy duty, centre ram pivot

01386 49155

PHIBER AC 3104 3 big bale accumulator, good condition. £4,500. B Clarke Tel 07799 881727/01953 857406 (Norfolk) CHOICE of 2 Hesston bale grabs, just came out of work. T Sulman Tel 07968 704497 (Cambs)

ParkLand 453 3 Bale Accumulator

TWO Vicon/Kleine/Garford

sugar beet drill aluminium cell wheels, 5 holes, part number 0553, new. GW Harrold & Partners Tel 07836 751076 (Norfolk)

THYREGOD T5 beet harvester, 2 row. £2,250. G Bett Tel 07903 010771 (Notts)

Buy and sell online

08-64079

02476 659 767

COMBINES & HARVESTERS RAPE sieve, good condition, previously in a MF34, but believe it ﬁts other models, call for details. Offers. L Poulter Tel 01487 841220 (Cambs)

MASSEY Ferguson 750 combine harvester, 1978, 14' Powerﬂow table, straw chopper, Hydro transmission, gwo, our own since 2001, used last harvest, very tidy, always oiled internally & stored under cover. £3,000. T Ashton Tel 07778 048770 (Lincs)

KIT BUILDINGS

Call Paddy 353910 P J Reed 07768

JOHN Deere 9780 Hillmaster, 2004, 25' header, OSR extension, 2450 engine hrs, 1776 drum hrs, immaculate condition. POA. S Robinson Tel 01487 822791/07850 999870 (Cambs)

CLAAS Lexion 750-780 off-side panels, new type aluminium, slightly damaged. GW Harrold & Partners Tel 07836 751076 (Norfolk)

steelwork, eaves beams, purlins & bolts

All sizes available – made to order

www.kitbuildings.co.uk

NEW Holland TF78 4wd Electra Plus, 2000, 2971 drum hrs, c/w 24' header & trolley, also Biso rape extension, in very good condition. £32,000+VAT ono. N Gaunt Tel 07999 855169 (Derbys)

STABLE block comprising

POA

CLAAS 20' rape extension, off 108SL, c/w electric side knife, excellent condition. A Boesen Tel 07770 886222 (Norfolk)

CLAAS Dominator 96/98 unloading spout & auger, small dent, easily ﬁxed. £950+VAT. J Turner Tel 07801 419504/01494 862348 (Bucks)

www.farmads.co.uk

2018, 4743 bales, twin wheels & LED lights

parts, brought for a 7278 will ﬁt other models, collection includes chopper blades, knife sections, sprockets & shaker bushes, email martin@ paddlesworthfarm.co.uk or call for full list. £150+VAT & postage. M Lingham Tel 07801 837785 (Kent)

TEN ex-electricity poles, 25–30' long. £300. K Ollett Tel 01359 270047 (Suffolk)

CRASH barriers, selection of

sizes, packs of 20 W section, 3.4m £16 each; 4.3m £20 each; 5.3m £30 each; box section 4.8m long, packs of 10 £32 each. C Wisson Tel 07776 184394/01480 830224 (Cambs)

COLLECTION of MF combine

Hardy Roofing Supplies www.hardyroofing.co.uk

Bale Grab

05-66384

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Claas Quantum 5800P forage wagon 2011 ...................................... £28,500 Various tedders, mowers & rakes in stock .............................................. CALL New Holland T5060 c/q Q55 59 reg .................................................. £19,995 Claas Quadrant 2100 baler 2009 ....................................................... £16,950 Browns 4.5m folding slitter vgc..............................................................£3,250 Dowdeswell MA140 6 furrow plough choice of 2 ..................... £4,250 each Marshall QM11 trailer 2011 hyd tailgate ..............................................£6,450 Dowdeswell Delta 100S 5 furrow plough .............................cheap @ £1,995 Maschio power harrow c/w Accord drill 3m 2006...............................£4,350 Malone 6’ pasture toppers new in stock & ready to go ............ £1,175 each New pallet carriages ..........................................................................from £450 Lemken Karag 9 2016 immaculate ........................................................£6,250 New LWC buckets & grabs in stock British built .................................... CALL Major 8400 ﬁnishing roller mower, 2002 ..............................................£2,750 New Malone tedders in stock, 5.7m ......................................................£6,250 New Malone post bangers, side & t/l tilt...............................................£2,600 Ranch 14t trailer, 2010, c/w silage sides ...............................................£7,995 Lely Hibiscus 915 rake 2017 ............................................................... £11,250 Warwick 12t trailer only seen grain .......................................................£6,450 Ken Wootton 14t trailer only seen grain ..............................................£6,450 Spearhead 555 Twiga hedger 2015 ......................................................£8,250 Manitou 740 120 Isu 2006 tidy.............................................................. DUE IN

08-65681

M&C CLADDING

08-66184

PORTAL frame building, 160’x60’, clearspan, steelwork only, approx 9,600 sq/ft. £17,000+VAT. W Woods 07860 128693/01279 600103 (Herts).

METAL SHEETS

BUILDINGS & MATERIALS

5 stables (4 stables plus store), Harlow boxes in line all lined, good condition, buyer dismantles & collects. £1,250. J Lynch Tel 07711 091981/01279 771389 (Herts)

SIDE knife, hydraulic, c/w spare blades, 4' cut, good condition. £400+VAT ono. R King Tel 07929 424474 (Notts)

16-FOOT knife for a Massey Ferguson 7345S combine, 2012. £130. R Sinkler Tel 01377 270251 (E Yorks)

158 www.farmads.co.uk July 2019

fg_class_july_19.indd 158

27/06/2019 15:36

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

Kverneland TA4332 LTQ

tractor, DC, 2 spools, 4 worklights, NH Lynx TL740 non self level loader

New Holland T5060 Deluxe

trailed bale wrapper, 2008, approx 38,000 bales

New Holland T4.65 Power Star

2wd, 12x12 power shuttle, clevis drawbar, 2 spools

66257

Crediton 01363 720430

Visit us on and

63791

www.andrewsymons.co.uk

High quality used equipment sourced and sold by experts

Kramer KT356 - £48,280 2311hrs, forks, Kramer head, camera, a/c apuh and trailer brake

CAT 216B, 2014 - £14,250 1324hrs, bucket, solid tyres and third line

Fendt 930 Profi Plus, 2016 – POA 2305hrs, Vario, guidance ready, 4 electric remotes, front suspension and linkage 710/70 R42

Fendt 930 Profi Plus, 2014 - POA 3850hrs, Vario, guidance ready, 4 electric remotes, front suspension and linkage 710/70 R42

John Deere 7290R, 2016 - POA 2156hrs, Autopower, TLS, 4 remotes guidance ready, front linkage, full suspension, Michelin 710/70R42 and 600/70R30

New Holland T7.190, 2018 - POA 528hrs, Range Command, 50 kph Exhaust brake, full suspension, 4 mechanical remotes, LED lights, 650/65 R38 and 540/65 R28

DLL specialises in sourcing and selling quality used equipment to meet your needs. Finance options available.

CAT 313F, 2016 - £53,000 2200hrs, hammer piping, safety valves, hitch and 4 buckets

New Holland T7.270, 2018 - POA 1336hrs, Auto Command, 50 kph Exhaust brake, full suspension, 98” Bar Axle, 4 electronic remotes, Intelisteer guidance (GPS) Intelliview Pro Touch, LED lights, 650/65 R42 and 540/65 R30

Volvo L90G, 2014 - £71,000 6695hrs, new 2.6m GP bucket, hitch, camera, weigh loader and third line

Buy and sell online — www.farmads.co.uk

South Molton 01769 574455

11011979

Kverneland 18t Duo Siloking

diet feeder, twin axle, variable cross conveyor, wide angle PTO

Holsworthy 01409 254040

5 furrow rev plough, No28 boards, auto reset, vari width, hyd front furrow

31012437

2wd with cab, 1 spool, no pick up hitch

Kverneland ES-85/200

106hp, 4wd, extra work lights, 3 speed PTO, air con, vgc

31012335

New Holland TD5.65

fertiliser spreader, Isobus controls, 2 hopper extensions

21011662

McHale 991BC

Kverneland Exacta CL2300 Pro Geo

21012544

Ferguson 4235 2wd only 2800hrs – very tidy runabout ............................................£12,750 Ferguson 3625F 4wd with loader, genuine 1800hrs – superb condition .....................£22,000 McCormick C-MAX85 4wd, turf tyres, 4000hrs, air conditioning – nice.....................£15,000 McCormick TTX230 6100hrs, 230hp, high spec, 50kph/air – excellent .....................£27,000 Case IH 844XL 4wd – very popular tractor – new clutch, tidy throughout ....................£8,750 JCB 530-70 loadall – 4600hrs – this is nice, don’t miss this one ..............................£24,500 Merlo 27.6 compact loader, 1500hrs, joystick full controls........................................£33,500 Artic Cat quad bike – diesel engine – a good powerful bike .........................................£4,750 David Brown 1490 2wd – manual gears – drives & looks well.....................................£3,950 Ruscon 1600gall slurry tanker – straight from work ....................................................£1,850 Rabe Corvus 5m hyd fold power harrow – immaculate condition ..............................£12,750 Portequip beef feeders/calf creeps/ex stock at attractive prices 1990 New Holland TX36 20’ header – this has to be seen ..................................................£18,000 1992 Ferguson 31XP combine, 14’ header/trailer – barn stored & nice.................................£5,750 Opico Heva Sward lifter, 3 legs, discs, Wox packer rings – little used ..........................£3,500 Selection of new & used chain harrows ready for delivery 2016 Bomford Kestrel EVOs – electric controls, Protrim T ﬂails – excellent...........................£7,000 Kockerling cultivation equipment – try these on your farm – amazing results Hayter mowers/Stihl equipment – visit our stores today

11012613

2000 2011 2006 2010 1990 2004 2017 2006 1983

mower conditioner, swivel headstock, Pro-fit blades, spread kit, lights

31012271

New Holland T4.105

McCormick X7.690 Efficient 225hp demo model, full suspension/air brakes, 50kph Autosteer ready, 90hrs only – superb reliability & finance – 3 years’ warranty on your farm for only £927 per month based on £25,000 trade-in & final settlement

11011637

Kuhn 2190 round baler – a really nice example – ready for work ...............................£12,500 Krone V150 – very low bale count – a genuine tidy baler ................................................ POA John Deere 592 round baler – a good cheap outﬁt ......................................................£4,850 Krone Swadro 6 rotor tedder, hyd headland control – as new ......................................£5,750 Pottinger MEX6 forage harvester – ready for grass only ..............................................£3,250 Greenland 3.6m tedder windrower/rake – good working order .....................................£1,350 New & used McHale/Grays/bale grabs/spikes – ex stock New Portequip bale trailers at remarkable prices – now ready for delivery

31012504

2011 2014 2006 2013 1996

Challenger MT775E, 2016 - POA 2170hrs, 762mm Extreme Ag tracks, 2170hrs, 762mm Extreme Ag tracks, guidance ready, weights - 22 front, 16 idler and 18 on track frame

More stock available, contact:

Richard McTurk T: 07711 411 601 E: richard.mcturk@dllgroup.com

usedequipmentsales.dllgroup.com July 2019 www.farmads.co.uk 159

fg_class_july_19.indd 159

27/06/2019 10:42

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

MANNS CLAAS LEXION 760 TT £159,000 2013, 10.5m Vario, 1265 drum hrs

Alastair McCallum, Used Machinery Manager Tel: 01284 777700 Mob: 07717 861815 email: a.mccallum@claas-manns.co.uk

claas-manns.co.uk

CLAAS LEXION 760 TT £190,000 2015, 10.5m Vario, 889 drum hrs

CLAAS LEXION 570+ TT £89,000 2006, 9.0m Vario, 1905 drum hrs

CLAAS LEXION 570 C £100,000 2009, 7.5m Vario, 1900 drum hrs

CL2174

CLAAS LEXION 780 TT T4I £190,000 2014, 12.30m Vario, 1364 drum hrs CL2212

CL2258

CL2308

CL2368

CLAAS LEXION 780 TT T4I £182,000 2014, 12.30m Vario, 1750 drum hrs CL2197

CLAAS MEGA 204 £30,000 1993, 5.10m standard cutterbar, 3291hrs CL2405

CLAAS LEXION 460 £47,500 1997, 7.5m cutterbar, 2552 drum hrs

MASSEY FERGUSON 38 £13,500 1991, 18’ m standard cutterbar, 3792 drum hrs MF0271

VADERSTAD RAPID A800S £16,000 2005, track eradicator tines, pre-em markers VA0006

CLAAS DISCO 3600C £9,250 2015, 3.6m mower conditioner

HORSCH PRONTO 6 DC £39,000 2012, disc coulters, grain only, track erad tines, pre-em markers, 3859ha HO0194

CLAAS VOLTO 1050T 2011, 8 rotor tedder

AMAZONE ZA-TS PROFIS HYDRO £16,950 2014, 4200L hopper, Amaton 3, weigh cell, 8 part section control AM0004

KUHN HR6004 2012, 6m power harrow

HORSCH MAESTRO 12.75 SW £70,000 2015, 16 rows with 75cm spacing, fert & seed on demand, covering discs, section control HO0178

CLAAS DISCO 3150TC 2016, 3m trailed moco

GALUCHO TMR 300 1992, 3m cultivator

CL2369

ZZ2162

BAILEY 16T £14,500 2011, hyd tailgate, sprung drawbar, roll over sheet, grain door, hydraulic brakes ZZ2169

CHALLENGER ROGATOR RG 655B £79,000 2013, 24/36m contractor boom, 4326hrs ZZ2119

CHALLENGER ROGATOR RG655 £125,000 2015, 6000L tank, 40kph, 320R75R42, 2800hrs CA0052

CLAAS ARION 650 £54,000 2015, 50k 184hp, 3500hrs, 540/65R28 fronts, 650/65R38 rears CT1609

CLAAS AXION 820 CIS 50K £48,000 2012, 50k, 230hp, 2630hrs, Michelin 600 fronts, 650 rears CT1662

CLAAS AXION 810 £38,000 2012, 50k, 210hp, 5100hrs

CLAAS ATOS 340 £29,000 2016, 40k, 102hp, 2000hrs, 380/85R24 fronts, 420/85R34 rears CT1649

CASE PUMA 230 CVX £56,500 2013, 50k, 230hp, 2426hrs, 540/65R30 fronts, 650/65R42 rears CI0200

JOHN DEERE 6620 £26,500 2002, 40k, 125hp, 6034hrs, 540/65R24 fronts, 650/75R32 rears JD0352

MASSEY FERGUSON 7624 £38,000 2012, 50k, 240hp, 7069hrs, 600/65R28 fronts, 650/65R42 rears MF0268

MASSEY FERGUSON 6480 DYNA 6 £25,000 2006, 50k, 145hp, 7380hrs, 540/65R28 fronts, 650/65R38 rears MF0269

CL2329

£9,000

CL2434

£9,750 CL2350

£5,500

CT1614

£14,500 KU0015

MATBRO TS270 1996

£9,250 MT0030 63719

160 www.farmads.co.uk July 2019

fg_class_july_19.indd 160

27/06/2019 10:43

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 66426

PROTECH

W&M Agricultural Engineering Oswestry • Shropshire • SY10 7JU

All prices + VAT

(15 reg), boom susp, PUH, 405/7024 (new), 3mnths warranty, full service, Lola certiﬁcate

£22,850

NC 26’ bale trailer 16t, spr d/bar, NC 2250 18t grain silage commercial hi spd axles, 445/45trailer 19.5 tyres, oil brakes with load sensing, 4m 8t alloy ramps, LEDs

in stock, full spec, please call for details

From

hyd folding

hyd side shift, large roller, heavy duty ﬂails

KRM 3m power harrow

£4,500

Concept 2.8/3m front/rear heavy duty ﬂail toppers

£2,850

good main auger, new spread rotor

MetalFach 2.8m plain mowers

£5,250

£4,850

POA Secondhand West 2000 dual spreader

Kverneland Monopil S 8 row beet drill

new tines ﬁtted

1997, excellent condition, well maintained drill

01691 683825 • John Mottram: 07968 715 512 • Mike Worthing: 07709 089 78 • email: john@wm-agrieng.co.uk

MONT

Agrifac Condor III C035249 2015

GUA RAN HS TEE

4000 litre 36/24m boom 4500 hours

trade in

Agrifac Condor III C035055 2013 4000 litre 36/24m boom 9300 hours 90000 hectares

trade in

Holmer T3 2012

Vervaet 617 2007

Agrifac UK Ltd.

Agrifac Premium Proven:

3527 hectares 3888 engine hours KosKo combi topper VR lifter, 45cm/50cm 800 65 R32 front tyres 1050 50 R32 rear tyres

4 Thorby Avenue, March, Cambridgeshire, PE15 0AZ 01354 660552

7500 hours 45/50cm walking share lifter Leaf spreader topper Harvest ready condition

Agrifac Condor IV C045134 2017 5000 litre 36/24m boom 1200 hours 8000 hectares

John Deere R4040i 2015 4000 litre 36/24/18m boom 3800 hours

trade in

Zunhammer SKE18.5PU 2017

18,500 litre tank 12 metre trailing shoe boom 750 tyres LED lights Joystick operation £76,500.00

trade in

Holmer T3 2010

6151 hours, 5562 hectares Leaf spreader topper VR lifter, 45/50cm hydraulically variable from cab 480hp MAN engine Fully refurbished with 12 months warranty

trade in

MONT

GUA RAN HS TEE

MONT

Agrifac Condor II C025108 2012

GUA RAN HS TEE

5000 litre 40/36/24m boom 7500 hours

trade in

Agrifac Condor IV C045307 2018

GUA RAN HS TEE

Buy and sell online — www.farmads.co.uk

NC I SER 14t silage/grain

bed, 5’ beavertail, hyd ramps, hi spd trailer 105kph axles, h/d spr susp, axle, air/hyd brakes, l/s, 215/75R17.5 hardox body, 50o tip, hyd r/door, air/ hyd brakes, l/s, 560 Alliance tyres tyres, LEDs, spr adj d/bar, 2018

Merlo 34.7 Plus 4700hrs, 2015

POA

NC low loader trailer 16t, 20’

POA

4800hrs, boom susp, PUH, a/seat, new 405/70-20 tyres, exc, 40kph, 3mnths warranty, FSH, Lola cert, LEDs, w/lights

£13,600

sides & r/canopy, grain doors, excellent condition (will split)

Merlo 32.6 Plus 2011 (61 reg),

Merlo 26.6SPT

63 reg, 3300hrs, air con, BSS, hitch 8500hrs, 2002, air seat & trailer brakes, air seat, new 20” 20” wheels tyres, fully serviced & Lola certiﬁcate

£10,500 the pair Pair of Richard Western 8t silage/grain trailers full silage

POA

Merlo 32.6 Plus

£12,000

2010, 5700hrs, boom suspension, air seat, 140hp, 40kph

£36,000

£24,850

www.wm-agrieng.co.uk

Merlo 40.7 Turbo Farmer

5000 litre 36/30/24m boom 1300 hours Ex-hire machine

trade in

Holmer TerraVariant 600 2011

8200 hours Factory refurbished in 2017 21m3 Zunhammer slurry tank 9000L/min Vogelsang slurry pump 5.7 meter reach 1050/50 R32 tyres

Holmer T440 2017

2810 engine hours Leaf spreader topper HOLMER EasyLift system Mercedes engine 45cm/50cm V-HR2 Lifter

Want to know more about the Agrifac Premium Proven or Agrifac Trade In program? Contact us via info-uk@agrifac.com or visit our website www.agrifac.co.uk

July 2019 www.farmads.co.uk 161

fg_class_july_19.indd 161

27/06/2019 10:43

CLAAS combine electric side knife for rape. £250. J Suckling Tel 01440 730367/07771 970820 (Suffolk) 66404

PEA lifters (14), telescopic. Offers. L Poulter Tel 01487 841220 (Cambs)

CLAAS Dominator 85, 1979,

Kverneland 4m

power harrow, c/w packer roller & trailer..................................£3,250

Kverneland Taarup 2428

mower, very tidy................£2,250

Case IH 4240 Pro

4wd tractor, 7800hrs .............................. £11,000

Merlo 28.9

telehandler, 9m lift height, Y reg PUH Matbro type carriage with pallet forks ........................ £12,000 All prices + VAT

07973 657609 COMBINES & HARVESTERS (cont) ZURN 24’ header rape extension, with twin side knives, to fit New Holland combine harvester. Call 07831 244269.

chopper, 15' header + trolley, good condition for age, few spares, including belts. £2,500+VAT. R Lane Tel 01234 740241/07703 280255 (Beds)

Worcester

CLAAS Lexion 570, 2004, 2582 eng hrs, V750 header with hydraulic side knife & laser pilot, good condition. £55,000+VAT. P Rix Tel 07766 768705 (Cambs)

MASSEY Ferguson 7272 auto

COMBINES FOR SALE 2011 NH CR9090

CLAAS Dominator 98, 15' cut,

straw chopper, header trolley, side knife & air con, approx 3800hrs, excellent inside & out. £16,000 ono. M Webster Tel 07881 802097 (Suffolk)

concaves to fit 580(+) or 560/760, 6 straw walker combines, can also be used to improve throughput. GW Harrold & Partners Tel 07836 751076 (Norfolk) SPALDINGS side knife, had recent new motor brackets to fit 10 Series John Deere, but could easily be made to fit another combine. £100+VAT. G Beazley Tel 07875 503966 (Shrops)

35’V 2311/1719

2011 NH CR9090

35’V 2494/1734

2012 NH CR9080

30’V 2303/1849

2010 NH CR9080

30’V 2250/1900

2006 NH CR980

30’V 2805/2284

2005 NH CR980

30’XHC 2669/2175

2004 NH CR980

30’XHC 2670/2175

2012 NH CX8080

30’V

2006 NH CX880

30’V 2750/2300

2009 NH CSX7060

1150/950

20’V 1287/1102

1997 NH TX66

20’

3700/3200

2013 CX8070

25”

1984/1526

1995 NH TC56

13’

3601

2017 Claas Tuc 430

SET of used Claas bean

ZURN right hand side knife, only used for 1 season, lightly used, approx 300 acres. £750+VAT. G Haxby Tel 07816 105237 (Lincs)

BISO CX100 20' rape header extension, to fit John Deere 820 header, with 2 hydraulic side knives. £1,250. G Wilson Tel 07966 421906 (Beds) SHELBOURNE Reynolds RS2000 rape swather, 14' cut, in working order, E reg. £4,500+VAT ono. R Nichol Tel 07766 824881/01728 602365 (Suffolk)

CLAAS Consul, 1977, 10' header, Perkins 4236 engine, superb machine in excellent condition, a pleasure to drive & work, used by ourselves harvest 2017, variable speed control, power steering, all hydraulic controls. POA. H Ashton Tel 07831 588318 (Lincs)

CLAAS combine wearing parts – 40 lifters, some new, some used; knife points & sections, all new; complete side knife, as new; pair of long dividers; retractable tines; various spares surplus to requirements. Offers. J Bird Tel 07973 346801 (Leics)

V620

400/200

2011 MF 9280 Delta 30’PF

1130/949

Approximate post-harvest hours

01733 841932

10-66610

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

SHELBOURNE Reynolds hydraulic side knife, good condition. Offers. D Smith Tel 07929 561955 (Herts)

www.aphltd.co.uk

HIRESALESSERVICEPARTS

BISO straw chopper to fit New Holland 8060/8070, c/w drive belts, pulleys, electric engagement clutch pack, chopper subframe, all fittings & books. £280 ono. A Drury Tel 07773 462336 (E Yorks)

level combine, 2003, c/w 22' freeflow header & trolley, 2745 engine/2255 drum hrs, in good condition. POA. N Gaunt Tel 07999 855169 (Derbys)

CLAAS electric side knife, almost new motor, ex Lexion, but will fit other models. £250. E Heading Tel 07949 198637 (Cambs)

SELECTION of spares to fit New Holland 8000/TX Series. A Drury Tel 07773 462336 (E Yorks)

frog mouth sieves, to fit 570/750, 5 straw walker combines, 174cm x 63cm. GW Harrold & Partners Tel 07836 751076 (Norfolk)

INTERNATIONAL Harvester 1440 axial flow combine, 1982, 14' header with trailer, 2690hrs, starts & runs very well, will go straight to work, good condition, no dents. £6,600. P Smith Tel 07761 800512/01427 874644 (Lincs)

17-FOOT oilseed rape extension, to fit New Holland header, manufacturer Rolmako, built 2013. J Evans Tel 07855 746344 (Hereford)

NEW Holland CR9070 combine, 2013, 1460 engine/1150 drum hrs, in excellent condition, on 24" Smartrax, c/w 9.15m Varifeed header, regularly serviced & available now. £136,995+VAT. J Furness Tel 07973 843230 (Glos) MF535 combine, 12' header with trolley, air con cab, monitors, chopper, smooth, quiet running machine, stunning example, well maintained, used last year, no longer growing crops, ready to go. £5,000+VAT. T Dallyn Tel 07527 224638/01837 83377 (Devon) CHAFF spreader, off Claas 108SL, excellent condition. A Boesen Tel 07770 886222 (Norfolk)

PAIR of Claas TM6 adjustable

OLD New Holland combine

lifters, barely used, some worn more than others but still in gc, some not used before (36). GW Harrold & Partners Tel 07836 751076 (Norfolk)

MATROT OSR side knife, hardly used. £550+VAT. M Wheeler Tel 01892 722532/07808 200404 (Kent) TWO preparation pans & 1 frog mouthed top sieve to fit Claas Dominator 118SL with 3D sieves, done one season & in vgc. £900 the lot or will split. J Hare Tel 07790 855867/01799 522197 (Essex)

NEW Holland 8050, 1980, 12' header with trailer, good condition, barn stored. £5,000 ono. A Davies Tel 01686 670831/07748 376840 (Shrops)

162 www.farmads.co.uk July 2019

fg_class_july_19.indd 162

27/06/2019 15:42

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

Reynolds Motors Cromer • Norfolk

M-Trac Ltd

63860

s/beet drills cleaners & trailing tanker harvesters 2 & 3 row

Mob Tel

2006 Bobcat T35-120SL 4900hrs, tyres 40%, tidy machine

2015 Case 321F loader 1800hrs, bucket & pallet forks

Perfect RF300 orchard/solar farm grass mower, hyd swing back head & offset, heavy duty topper £2,740

NEW McCAULEY RANGE 2018 EX-SHOW NHS OF TRAILERS low bed height, 9” feed, anti-block, microchip shallow beavertail, s/d/bar, 19t kit, for quality chip gross 16’ flat 5’ beaver IN STOCK £12,950

£16,950

WANTED 07836 643155 01263 833281

Kubota F3560 4wd out-front mower 72” deck, good working order

£28,500

£3,950 + VAT

£9,500 + VAT

£12,950

Tel 01280

All prices exclude VAT

705353 Fax 01280 702849

email marks.stockwin@m-trac.co.uk For more pictures please visit www.m-trac.co.uk

Call us on

2009 Simba DTX 3000 one pass cultivator c/w 5 front tines, two rows of discs, DD packer

2008 Case CX31B 4500hrs, Q-hitch, 5 buckets, 95% tracks

2012 Kubota GR2120 Kubota 1m rear flail mower 4wd tractor mower, collector heavy duty machine box, striping roller, very £4,250 good condition £4,950 £1,100

See more at

2013 Kongskilde Delta HSF 300 c/w 7 tyres, following discs & 24” crumbler

Brackley, Northants

01763 780440

Ziegler Disc Master Pro 3001 c/w 22 discs, harrow & hydraulic crumbler

2011 Cousins Patriot 3m one pass subsoiler 5 legs, two rows of discs & razor ring packer

£6,950 + VAT

£8,950 + VAT

2008 Sumo Trio 3m one pass subsoiler in good order with half worn wearing parts

£9,750 + VAT

Cousins 4.25m 9 leg V-Form soil loosener packer roller & Stocks rape seeder attachment

Vaderstad TopDown 300 one pass cultivator c/w new wearing parts & discs hardly used

Cousins 30’ Sidewinder Cambridge rolls c/w 24” half worn plain rings

2002 Vaderstad Rexius Twin 450 double row land packer c/w 2 rows of tines

Vaderstad Rexius Twin 630 double row packer c/w 3 rows of tines & hyd levelling board

Cousins Contour 10m vertical folding rolls c/w 22” breaker rings & in good condition

Simba 12m horizontal fold Cambridge rolls c/w 22” plain rings

2008 Cousins Contour 8m articulated rolls c/w 24” breaker rings in nice order

2005 Fendt 716 Vario 4wd tractor 50k, front linkage & PTO, air brakes, 80% tyres

2007 John Deere 6430 Premium 4wd tractor front linkage & passenger seat

£2,950 + VAT

£6,750 + VAT

POA

£7,950 + VAT

£6,500 + VAT

£6,950 + VAT

£11,950 + VAT

POA

Buy and sell online — www.farmads.co.uk

BEET HARVESTERS TIM & THYREGOD 2–3 ROW beet buckets – choice of standard & toe tip BEET CLEANERS – CHOICE OF CTM & TODD precleaner or roller table with picking tables, etc BEET DRILLS – CHOICE OF 6 & 12 ROW Monopill, Monosem, Kleine & Stanhay BEET HOES CHOICE OF 6 & 12 ROW HYD FOLD Standen • Househam• FMA 6 METRE FRONT STEERING PRESS HYD FOLD Edlington 6.5m hyd folding rolls with breaker rings TERRADISC CULTIVATORS 3 & 4M Dutch & combination harrows 3 to 6 metre VADERSTAD ROLLEX 620 6M ROLLS Opico 3m grass topper DOWDESWELL DP100 DELTA 4+1 PLOUGH Krone Optimat 4t muck spreader FLAT LIFTS – SUB SOILERS 2 TO 5 LEG 45’ tri-axle artic trailer on air for straw, etc 8T BUNNINGS DUMP TRAILER rowcrop wheels & tyres – rears 8 stud 14.9R46, fronts 10 stud 14.9R30 12T ECE HIGH TIP GRAIN TRAILER, ROLLSHEET sprung drawbar, hyd tailgate, ﬂoatation tyres 14T GULL AIR & HYD BRAKES/TAILGATE sprung drawbar roll sheet on 10 stud axles 14T MARSTON GRAIN TRAILER MANUAL TAILGATE Choice of low load single axle drill trailers 50’ NEAN COMBINE/MACHINERY TRAILER full MOT wells & outriggers on air with rear lift

66487

£14,250 + VAT

£25,500 + VAT

66398

July 2019 www.farmads.co.uk 163

fg_class_july_19.indd 163

27/06/2019 12:25

62780

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

01302 759969

Unit A7 Lords Wood Road, Harworth, Doncaster, South Yorkshire DN11 8BZ

info@moorefarmservices.com

NEW 2019 KRONE EASYCUT R320CV mower conditioner, parking stands & wide spread plates

NEW KRONE COMPRIMA F125 XC round baler

NEW AMAZONE ZA-TS 4200 fert spreader, ISOBUS, hydraulic hopper cover, up to 54m spreading width

NEW KRONE BALE COLLECT bale accumulator

£12,750

POA

POA ALSO IN STOCK/COMING IN SOON...

2014 KRONE SWADRO 1400 PLUS excellent condition

2014 KUHN 4004 4m power harrow, excellent condition

NEW KRONE KW 5.52 4 rotor tedder

POA

£9,000

£5,900

NEW KRONE F320 CV front moco POA NEW KRONE KW 8.82 8 rotor tedder POA NEW KRONE TC 760 7.6m twin rotor rake POA KRONE BIGPACK 1290 HDP demo machine POA 2011 AMAZONE UF 1801 mtd sprayer, 24m booms, DUS, Proﬁfold 1, Amatron+, NSTS test POA 2002 KVERNELAND ACCORD TS 4m tine drill, new coulter tips £5,550 2013 KVERNELAND TAARUP 2632M mower, good condition £3,250 2012 CENIUS 3002 mounted cultivator, DD packer roller £9,000 2008 AMAZONE ZA-M 2701 CONTROL fertiliser spreader, Amados+ box £2,000 2008 SULKY X36 fertiliser spreader, electronic border system £3,600

www.moorefarmservices.com

All prices plus VAT

www.farol.co.uk

FLAILBOT Covering challenging, steeply inclined terrain. Remotally controlled wirelessy. Flailbot provides ultimate mowing capability. • • • •

Excellent grip characteristics Adjustable working height Hydraulic front hood Engine size: 40hp

IN STO

FOR MORE INFORMATION PLEASE EMAIL SALES@FAROL.CO.UK Rycote Lane Farm Milton Common Thame Oxfordshire OX9 2NZ

01844 278843

Boddington Road Coldridge Copse Byfield Shefford Woodlands Daventy Hungerford Northamptonshire Berkshire NN11 6FL RG17 7BP

01327 264844

01488 648552

London Road Hare Hatch Twyford Berkshire RG10 9EQ

Wharf Farm Coventry Road Hinckley Leicestershire LE10 0NB

Holmbush House Holmbush Ind Est Midhurst West Sussex GU29 9XY

01455 638960

01730 819981 01182 077760

164 www.farmads.co.uk July 2019

fg_class_july_19.indd 164

27/06/2019 10:44

WORKSHOP compressor, 1hp, single phase motor, gwo. £100. E Calcott Tel 01827 62265 (Staffs)

POA Ingersoll Rand Doosan road compressors

CAT 308E, 2017, fully spec'd, twin circuits, reversing camera, Dromone quick hitch, 12", 36" & 6' grading bucket with bolt on reversible blade, A/C, radio, Stell tracks with city clock pads, only 160hrs, EPA sticker. POA. www. mktractors.com. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

Contact James French

07764 873486

jamesfrench328@gmail.com

POA

3 cylinder workshop compressor 2013, 500L tank, as new condition

TM 135 cab link PTO

BACK actor for International Drott B100, JCB type, unused for several years, needs some replacement hydraulic pipes, all rams present, c/w 1 bucket, suitable spares or repair. Open to offers. M Crosby Tel 07876 196476 (Essex) TRACK Marshall 70 bulldozer, good tracks, engine, hydraulics, working order, cab. POA. H Ashton Tel 07831 588318 (Lincs)

Hyundai Robex 60CR-9 2015

www.midlandsagriplant.com

CROP PROTECTION PORTEK Scatterbird Mk2 bird scarer, 2004, c/w gas cylinder, battery & charger. £100. R Sinkler Tel 01377 270251 (E Yorks)

DIGGERS, DOZERS & DUMPERS

Thwaites 3t swivel skip 2003

Cat D4D 60J 1969 cab link

Cat D7E 1965 cab angle blade

01530 229686 or 07831 113316 11-66575

Volvo EB750 skip fill dumper 2003

Cat D6C 1967 cab angle blade

Excavators & Mini Diggers Hitachi ZX130LCN-3 2013 4070hrs JCB 86C 2014 1514hrs

Hitachi ZX29U-3CLR 2014 JCB 8008CTS Micro 2013 850hrs

Miscellaneous

£8,000

HORSCH CO 6 seed drill, blockage sensors, tramlining, cleated tyres, following harrow, new fan motor ﬁtted autumn 18, duet coulters, option of Dutch openers at extra cost, good condition. £7,800. N Graves Tel 07710 835302 (Northants)

drill with reciprocating power harrow, roughly 2000, with a 2013 box drill attached, with Suffolk coulters & control box, hydraulic depth control & mechanical seed rate. £5,000 ono. W Hammond Tel 07879 253722 (Norfolk)

2011 Horsch Pronto 8DC AMBASSADOOR electric roller

sales@oakfields-ag.com

£38,750 8m seed drill c/w electric half width shut off, blockage sensors, rear filling auger, good, tidy drill

15-66539

13-66503

01763 780440

John Deere 3400 Teleporter 2002 7000hrs Ifor Williams plant trailer 66410

KRM 6m air drill, 3 rows of Suffolk coulters, hydraulic folding, excellent condition, purchased to use as min till drill when too hard to plough last autumn. £3,000. D Murrell Tel 07850 724139 (Norfolk)

KRM Pack-XR piggyback grain drill, 4m, Suffolk coulters, hyd markers, electric tramline control box, harrow tines on rear. Offers. S Parrish Tel 07785 502436/01992 572511 (Essex)

AMAZONE 3m combination

POA

Caterpillar 941B tracked loader 1973

Visit our website www.fenlandtractors.co.uk to see our stock machines

DOORS

4 buckets, adjustable tracking, just 1566hrs!

Hyster H7.00XL 1991 S/S Perkins

Suppliers of replacement parts for Caterpillar machines We hold a good stock of D2 new and used parts

HITACHI EX8, 850kg, recent tracks, c/w buckets. £4,250 ono. M Robson Tel 07967 139678 (N Yorks)

shutter door, 10'3" (3.1m) by 15'6" (4.75m), as good as new condition, very little use, can be seen, in full working order, if needed, call for more details. New price for unit is £1,600+VAT. Selling at £695+VAT. P Skinner Tel 07711 405100 (Nor thants)

JCB TLT30D Teletruck 2008

Doosan DX140LCR 2013 2120hrs

New McCauley GP12 dump trailer

Gary Davison Bedfordshire 07831 777666 • 01233 870223

2013 Hyundai Robex 16-9 mini digger

Forklifts & Telehandlers Manitou MLT634-120LSU 2012

Due In

Yanmar V1033-U 2012

with system disc, new drilling discs 2yrs ago, 2000 model, rear auger, excellent condition

JCB 3CX Turbo 4x4 Sitemaster, Extradig, c/w 2 buckets, stored undercover, very good condition. £7,450+VAT. C Frampton Tel 07748 375665 (Somerset)

Bowmag BW120AD-4 roll 2005 1352hrs

For The Collector

Hitachi ZX48U-5 2015 1011hrs ACCORD 6m, following harrow, tramliners, pre em markers, end tow, good working order. £895. H Brown Tel 07764 477766 (Cambs)

Benford Terex 3t swivel skip 2004

www.tvmachinery.com Tel Mike 07764 835562(T)

VADERSTAD Rapid A400S 4m

drill, 2009, excellent condition, 3088ha, system disc, original metal, radar metering, wheel eradicators, Taunton. £23,500+VAT. M Limm Tel 07774 155693/01458 251325 (Somerset)

SIMBA 6m Freeﬂow drill, 2002, electric/radar metering, heavy duty tines, narrow coulters & points, good condition for age. £7,000. C Juhl Tel 07836 735830 (Essex)

Buy and sell online — www.farmads.co.uk

Rednal Pneumatics

Case 921E wheel loader 2008

Cat D4E VHP 1984 link cab weight

15-66613

HYDROVANE compressor, towable, with Ford engine. £950. H Taylor Tel 07763 125574 (Bucks)

Terex 2566C dump truck 1997

Cat D5B VHP 1985 link cab weight

PRIESTMAN Mustang Mk3 digger bucket, only used once in 30yrs, good condition, 6' wide, sold as seen. £850+VAT. J Hurd Tel 01985 840260 (Wilts)

Vaderstad Rapid 8m

www.midlandsagriplant.com

Agricultural Crawlers & Bulldozers

Cat D4D 44H 1977 cab link weight

DRILLS 11-66574

Limited

Station Yard, Postland, Crowland, Peterborough, PE6 0JT Tel: 01406 330386 Fax: 01406 330080 Email: martyn.stanley@fenlandtractors.co.uk

2012–2015, 600–1300hrs, twin tool

01530 229686 or 07831 113316

Fenland Tractors

Roller shutter doors made to measure We also repair all types of industrial doors We can erect or make alterations to steel work for new door openings Call for free site survey

14-66416

COMPRESSORS

ROLLERSHUTTERDOOR SHUTTERDOORINSTALLATION SHUTTERDOOR DOORINSTALLATIONREPAIR INSTALLATIONREPAIR

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

ACCORD CX disc coulters (24), bought as upgrade, including brackets, springs & rubber connectors, new in 2013, had little use, not used last 2 seasons. £2,000+VAT. P Lowrie Tel 07818 233722 (Co Durham) WEAVING 6m Big Disc drill, 2013, 2.5t caddy, slug/fert/OSR applicator, hyd markers, lights, RDS Artemis controller, hyd fan, hyd axle, operator's manual, quantity spares, vgc. £21,750. N Wade Tel 07759 419480 (Lincs)

TION

MEN PLEASE

DE I U G S R E LYING FARM S HEN REP W EMENT S I T R E V TO AD

July 2019 www.farmads.co.uk 165

fg_class_july_19.indd 165

27/06/2019 15:50

KVERNELAND Accord TS 4m tineseeder, 4 row stagger, electronic metering, following harrow, nearly new points, very good condition. £5,900+VAT. C Frampton Tel 07748 375665 (Somerset)

ARABIAN bay gelding of exceptional quality with world class pedigree, super looking animal, rising 4yrs, 15hh, ready to be broken & taken on in any sphere. E Jones Tel 07495 589823/01558 823405 (Carmarthenshire) ACCORD front hopper, 700L hopper, fertiliser/ seed metering, with 8 way distributor head, land wheel drive seed metering. J Brook Tel 07957 846865 (Lincs)

EQUESTRIAN ACCORD 4m spring tine

drill, hopper extension, bout markers, tramline controller, end tow kit. £800 ono. A Little Tel 07803 156024 (Rutland)

MOTORWAY

CRASH BARRIERS

18-64247

RAILWAY

SLEEPERS

07813 182054 01536 771246

HOME-BUILT strip till OSR drill, 8 legs at 50cm spacing, c/w Opico seeder, power req 130hp. £7,000. C Gilbert Tel 07506 055429 (Lincs)

KUHN/ACCORD combi drill, 4m, low loader trailer, power harrow refurbished, 50% tines, ceramic tips, hopper extension. £6,000+VAT ono. L Sutton Tel 07970 658813 (Warks)

CLAYDON Hybrid 6m twin tine kit with low disturbance points, excellent condition. £2,400 ono. W Beers Tel 01604 781494/07712 435168 (Northants)

ACCORD Tandem DL, 6m,

64 coulter, following harrow, electric tramliners, spares, working order. £990+VAT ono. J Browning Tel 07848 460399 (Hants)

FENCING & GATES

Northants

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

CARRIER 4m tine drill, tramline, pre emergence markers, wheel eradicators, off small farm, stored under cover. D Felkus-Upton Tel 07813 553629 (Suffolk)

MOORE Unidrill, 2012, 6m, hydraulic folding, hydraulic brakes, RDS Artemis box, c/w liquid fert kit, very good condition, very little use. £32,000. M Abblitt Tel 07720 839253 (Cambs) KUHN 3m Venta LC302 power harrow/ drill combination, excellent condition (used as a backup drill so low acreage), 3 rows of Suffolk coulters, hyd fan, in cab electronic control for tramlines & markers. £21,500+VAT. J Furness Tel 07973 843230 (Glos)

FOR SALE

DRILLS (cont)

MF corn drill, 3m, 27 coulters,

tramline, wheel eradicators & following zigzag harrows, barn stored, vgc. £1,100+VAT. M Kinahan Tel 01386 552296 (Worcs)

COLLINS type menage rake, very good order, done very little work. £1,200. M Fletcher Tel 01737 821220/07768 931891 (Surrey)

PURE bred Arabian chestnut stallion, by US double national champion Tussardi out of Versace daughter, fabulous temperament, recently broken to ride, 14.3hh, from the home of current World Champion Admiraal. E Jones Tel 07495 589823/01558 823405 (Carmarthenshire) GOOD homes required for retired racehorses, can be seen ridden by young girl, used to living out. M Chapman Tel 07971 940087/01673 843663 (Lincs)

ELECTRIC fencing, in 50m

rolls, qty, for poultry & rabbits, call for more info. I Cowell Tel 07788 985544 (Essex)

ANGLE iron fence posts, 40x40x5mm thick, 2.7m long, ideal poultry/game release pen, tennis court, etc. Offers. P Mann Tel 01480 811969 (Cambs)

JUKO 4m tine drill, c/w

TECHMAGRI Proﬁlab, 2009, 3m, c/w Guttler packer roller, DiscoTwin, Stocks Micrometer & spear wearing parts, superb condition. £6,250. J Warne Tel 07986 548621 (Suffolk)

TULIP 4m Drillmate to ﬁt Accord drill, pigtail tines with levelling board & toothed packer. £1,100+VAT. W Bryce Tel 07894 912341 (Suffolk)

VADERSTAD Rapid RDA

400 system disc drill, 4m, hydraulic folding, new discs & coulters all round, ﬁtted Digitrol Seed Master Plus blockage sensor, immaculate. A Simpson Tel 01738 840111 (Perth & Kinross)

Flexicoil Drillmate, spare drill included for parts, used as farms only drill for 20+ years, brilliant drill in good condition, ready to go, sale due to change in farming policy. £1,950+VAT. P Allen Tel 01328 830348 (Norfolk)

RANSOMES Nordsten mounted 4m drill, been set up for drilling maize, etc, for pheasant cover, good condition for age. £1,200 ono. J Kiddy Tel 07860 452972 (Cambs)

SECURITY barriers/gates, very

RINGFORT foal creep feeder, 4

outlets, legs can be ballasted with sand/water for extra stability, 40kg capacity, nut or pellet feeds. £200+VAT ono. J Nott Tel 07957 146325 (Norfolk)

strong, ideal to make your own, need hinges making for them, approx 10' long x2' tall, 4 of. £75 each no VAT. D Ivens Tel 07969 877834 (Northants)

www.farmads.co.uk

NATIONWIDE HIRE – ALL DELIVERED BY OUR OWN TRANSPORT

66399

e r i h r e d a e r p S k c u M

New for 2019 seaso

Fendt and John Deere tractor hire 35–500hp, long- and short-term hire available

FOR CONTRACTING

FOR HIRE

FOR SALE

Tel: 01206 230662 • Email: phil@livertonltd.co.uk • www.livertonltd.co.uk

Full range of McConnel vegetation management equipment available for hire; 3m–8m side arm flails, quad saws, rotary hedge cutters, Robocuts, mulchers, forestry heads, trenchers, stump grinders

• 30 Harwich Road, Ardleigh, Essex CO7 7LS

166 www.farmads.co.uk July 2019

fg_class_july_19.indd 166

27/06/2019 16:04

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

Startin Startin Tractors Limited Twycross CV9 3PW

Case IH RB455 rotor cutter baler, 2017, demo machine, optional chemical applicator

All prices + VAT

Case IH Axial Flow 9240 c/w 35’ header, side knives & trolley, Redekop chopper, ready for work Case IH Warranty, 0% Finance*

Case IH Axial Flow 7088 c/w 24’ Vario header, side knife & trolley, 636 rotor hrs, Pro 600 screen

Case IH Axial Flow 7230 AFS 25’ header & trolley, 1126 drum hrs, ready for harvest

Case IH Axial Flow 2388 Xclusive AFS c/w 20’ header & trolley, 1870 rotor hrs, yield & moisture meter

Case IH Axial Flow 9230 4wd 2012, 1566 rotor hrs, 35’ header & trolley

Case IH Axial Flow 9230 on tracks 35’ header, trolley & side knives, 891 harvesting hrs, 2014

Case IH Axial Flow 9230 on tracks 35’ header, trolley & side knives, 794 harvesting hrs, 2014, Redekop chopper

Case IH MXM190 Powershift suspension 40kph, 650/65x42 tyres, front weights, creep gears

Buy and sell online — www.farmads.co.uk

Case IH Axial Flow 8240 suspension tracks, 35’ header & trolley, full GPS.2015, 942 rotor hrs, ready for work

Case IH JXU1100 Powershutle, 24x24 Powershift, 4012hrs, 16.9x34 tyres, air conditioned cab, supplied new by us

Case IH MX100c Powershuttle, 16.9x38 Goodyear tyres, lovely straight example sold new by us, 4127hrs

Case IH LB434 large baler, 120x90 bale size, 29367 bales made, 2014 machine

01827 880088 • sales@startintractors.co.uk • Check our website for up to date list & photos:

www.startintractors.co.uk

* Finance offered

subject to terms & conditions 66356

July 2019 www.farmads.co.uk 167

fg_class_july_19.indd 167

27/06/2019 10:45

the force behind the harvest

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

MF 2140 single axle baler, 2012 model Stock No 679, bale count 82,855, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK............................................. £52,000

MF 2270 XD tandem axle baler, 2016 model Stock No 793, ***ﬁrst used 03.06.2017*** bale count approx 25,000, fully serviced c/w hydraulic knotter blower, knotter & chain lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK ......................................... £90,000

MF 2190 tandem axle baler, 2013 model Stock No 808, bale count 41,286, fully serviced hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK............................................. £64,000

MF 2270 tandem axle baler, 2015 model Stock No 820, ***ﬁrst used 24.08.2016*** bale count 22,531, fully serviced c/w hydraulic knotter blower, knotter & chain lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK............................................. £75,000

NH BB9090 single axle baler, 2013 model Stock No 821, bale count TBA, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK............................................. £60,000

MF 2290 single axle baler, 2018 model Stock No 822, bale count 5,452, fully serviced c/w hydraulic knotter blower, knotter & chain lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK............................................. £94,000

NH BB9090 single axle baler, 2010 model Stock No 823, bale count 44,491, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK............................................. £50,000

MF 2170 tandem axle baler, 2013 model Stock No 824, bale count 31,146, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK............................................. £60,000

NH BB9090 single axle baler, 2010 model Stock No 825, approximate bale count 44,000, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK............................................. £46,000

New 2018 model MF 2240 single axle assembled, prepared & delivered, 12mths parts & labour warranty ............... £82,000

New 2018 model MF 2270 XD tandem axle baler assembled, prepared & delivered, 12mths parts & labour warranty ............. £117,000

New 2019 model MF 2290 tandem axle baler assembled, prepared & delivered, 12mths parts & labour warranty ............. £111,000

Tel: 01489 896346 Fax: 01489 892188

All prices plus VAT

www.bigbale.co.uk e-mail: info@bigbale.co.uk 66411

168 www.farmads.co.uk July 2019

fg_class_july_19.indd 168

27/06/2019 10:46

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 66362

R.C.Boreham & Co

Visit our new website www.jfsales.co.uk

Agricultural Engineering

LTD

New & Used Machinery

Specialising in JOHN DEERE’s for over 30 years

For all enquiries call: 01245 231320 £39,000

Deutz 5125

excellent condition, 2017, multiuse tyres (95%), 463hrs, loader ready

£33,000

Sumo Multipress 5m

£2,400

Logic TRM150B16FW topper

3 seater version, outgoing model, cab options available, 0% finance available

£1,950

Fella TS455DN rake

2002, good condition for age, twin axle wheels

£6,950

Polaris Ranger 1000D

2014, screen, roof & rear panel, good condition

Pottinger Terradisc 6m EX DEMO

excellent condition, large diameter disc, pack ring roller

£6,750

JOHN DEERE 6830 £36,650 2008, 5300hrs, 40k, P/Quad, TLS

JOHN DEERE 6620 £27,650 2004, 5800hrs, 40K, P/Quad, TLS

JOHN DEERE 6430 £30,500 2010, 4300hrs, 40k, TLS, P/Quad

JOHN DEERE 6210 £18,650 1998, 5400hrs, P/Quad, with creeper

JOHN DEERE 6210 £19,000 2000, c/w loader, 4000hrs, low proﬁle cab

JOHN DEERE 2650 £7,850 2wd, in very good condition

JJOHN DEERE 5720 £18,650 2006, P/Quad A/C

JOHN DEERE 6320 £20,000 2005, 5500, P/Quad, 40k A/C

DEGENHART LINKS £1,350 from John Deere 6150R

McHale 995LTSR wrapper

2002, good condition, static engine, 18,395 bales

£8,750

Sumo Trio 3

shear pin, 3m, ood condition 66409

2018, Vanguard engine, excellent condition, 1.5m cut

Polaris Ranger 570 full size – NEW

£29,500

Chelmsford, Essex CM3 1HU | rcboreham.co.uk | sales@rcboreham.co.uk

Contacts:

James - 07714 278560 • Richard - 07860 661358

James@jfsales.co.uk • Richard@jfsales.co.uk •

Kings Farm, Milton Keynes, Beds 66242

07768 171085 March • Cambs info@harrisontractors.co.uk

Photos & more at:

www.harrisontractors.co.uk

New and Ex Demo Machinery 0% Finance Pottinger 6030T Synkro, stubble cultivator, 2012, ex demo .........................POA Pottinger 3030, Synkro stubble cultivator, 3m, mixing discs, pack ring roller ...........................................................................................POA

Pottinger Terradisc 3001, 3m, pack ring roller .............................................POA Pottinger FoxD, 4m, pack ring roller ............................................................POA New INO MKS 2.25m verge mower, hammer ﬂails, r/roller ..................... £6,450

Used Machinery John Deere 6190R, 2013, 4100hrs, Autoquad, 40k, TLS, cab susp, Autotrac ready .................................................................................... £51,000 John Deere 6150R, 2015, 4600hrs, 50k, Autopower, TLS, cab susp, 650/65/42, 540/65/30, v/nice ............................................................. £53,000 John Deere 6930, 2010, 7700hrs, 40k, Autopower, TLS, cab susp, 580/65/38 60%, 420/65/28 90% ......................................................... £34,750 John Deere 6830 standard, 2009, 4200hrs, TLS, Powerquad, 40k, 20.8x38, 16.9x28, v/nice .................................................................... £36,750 John Deere 6920s, 2003, 7300hrs, 50k, Autopower, TLS, cab susp, 650x38, 540x28, tidy .......................................................................... £20,000 John Deere 6330, 2011, JD 651 loader, only 2675hrs, Powerquad, 40k, air con, excellent from arable farm ............................................... £36,500 John Deere 6330, 2011, JD 651 loader, only 6800hrs, Powerquad, 40k, air con ........................................................................................ £32,500 John Deere 6330, 2011, only 3900hrs, Powerquad, 40k, TLS, air con, excellent from arable farm ................................................................... £34,500 Fendt 820, 2010, 14000hrs, 55k, f/linkage, 650x42, 540x30, tidy for SOLD the hrs ................................................................................................ £33,000 Case Puma 210, 2008, 9500hrs, 50k, multi controller, f/linkage, 580x42, 540x30, tidy .......................................................................... £25,500 Case Puma 170, 2012, 5000hrs, powershift, 40k, f/susp, 650x38, 540x28, straight & tidy ........................................................................ £39,250 Case Puma 155, 2011, 4500hrs, 50k, f/linkage, 520x38, 480x28, nice £34,500 Case Maxxum 140, 2008, 4300 hrs, Multicontroller, susp, v/nice ......... £27,000 Case MXU 135, 55 reg, 5200hrs, Quicke Q50 loader, f/& cab susp, smart outﬁt ......................................................................................... £26,500 Case MX 135, 2000, powershift,, 40k, f/linkage, 20.8x38, 16.9x28, tidy . £18,750 New Holland T7.210, 2013, 2900 hrs, 50k, Power Command, f/& cab susp, sidewinder, one owner, mint ....................................................... £44,500 New Holland T7040, 2010, 7900hrs, powershift, 40k, full susp ............... due in

New Holland TM 190 Ultra, 2004, 4900hrs, 50k, 580x42, 480x30, mint condition ..................................................................................... £23,750 JCB 530-70 Agri Super, 2004, 6000hrs, Q fit headstock, full spec, from arable farm ................................................................................. £21,500 JCB 530-70 Agri Super, 2004, 6000hrs, pin & cone headstock, full spec, from arable farm ........................................................................ £21,500 JCB 526-56, 57 reg, 6000hrs, joystick, PUH, 17.5x24 50%, tidy ......... £19,250 JCB 528s, 2000, 7000hrs, PUH, 17.5x24 50%, tidy ................................ due in Claas Scorpian 6030, Vario power, 7000hrs, 40k, PUH, 17.5x24, tidy .. £18,000 Pottinger Terrasem C9, 9m drill, 2012, bout marker, pre-ems, double disc coulter ......................................................................................... £44,000 Pottinger Terrasem C6, Artis Plus 6m drill, 2012, bout marker, preems, double disc coulters ....................................................................... due in Pottinger 45S Plus plough, 2013, hyd-vari width, 46w bodies, large depth wheel, as new ........................................................................... £14,000 Pottinger 4030T, 4m trailed stubble cultivator, pack ring roller............... £14,500 Pottinger 6003 Synkro, 6m folding stubble cultivator with sprung legs, wings, depth wheels.............................................................................. £9,950 Pottinger Lion 6000 6m, power harrow, 2013, pack ring roller, quick fit tines, v/nice ........................................................................................ £13,500 Bailey Beeteaper 18t trailer super singles, 2001, s/d/bar, average ........... £7,500 Bailey 14t Root trailer, 1999, s/d/bar, super singles, hyd door ................ £7,950 AS Marston 12t Fenlander root trailers, s/d/bar, super singles, roll over sheet, choice of 2 ................................................................................. £5,750 Cousins 3m Patriot, 2006, 3 leg, discs, razor ring roller ......................... £5,950 John Deere rowcrop wheels, 13.6x48, 12.4x32 or 34, suit JD 6430, 6125R .................................................................................................. £2,950 John Deere 12.4x32 wheels & tyres, for JD 6430 or similar ...................... £650 Rowcrop wheels 13.6x46, 12.4x32 as new to fit Case Maxxum or similar .............................................................................................. £1,750

Buy and sell online — www.farmads.co.uk

3 rows of tines, press paddles, twin row of packer rings

£6,950

July 2019 www.farmads.co.uk 169

fg_class_july_19.indd 169

27/06/2019 12:33

Tel: 01507 466352 Mobile: 0780 134 3023 Fax: 01507 462812 Email: ian@ianhoulgrave.com

Hall Farm, Aldeburgh IP15 5JD MF 2640 4wd tractor very tidy......... £6,250 Nodet 4 row maize drill.................... £1,200 Fordson Power Major for restoration .....POA Vogel & Noot plough 5 furrow ......... £2,500 Various cultivators & subsoiler .............POA McConnel Allwork tractor mounted saw bench ................................... £650 Cousins Sidewinder rib rolls vgc ...... £5,000 Fordson E27N petrol/paraffin 2wd Gem 20m self tracking trailed tractor unfinished project ........... £1,300 sprayer...................................... £1,200 Various grain bucket ............................POA Kongskilde 4m manual fold vibroflex £1,200 Reco Sulky 24m twin disc fert Tim Howard 5 leg subsoiler c/w speader with lights & cover........ £1,000 packer roller .............................. £1,600 All tractors and machinery wanted – dead or alive!

See our new website for more details & photos www.hallfarmmachinery.com

Tom 07872 916363

FORAGE & SILAGE

64365

CLAAS 870 SPFH 2017

Main Agents for

CAD ASPIRATORS OLIVER GRAVITIES

Also�Silos,� Elevators�&�Conveyors,� Driers,�Stirrers,� Fans�&�Accessories

Tel: 01746 762777 www.danagri-3s.com

Roy Edwards 07702 408833 Full engineering, installation & dismantling services

www.grainmachinery.co.uk

KIDD forage wagon, twin

discharge, needs new belts, but functions. Offers. R Reed Tel 07533 997915/01289 387233 (Northumberland)

HEAVY covers for silage clamps – 12' x 14', £125 & 20' x 22', £210. G Swindells Tel 07974 695924/01909 509541 (Notts) 4-FOOT wrapped round bale haylage. W Everett Tel 01263 860112 (Norfolk)

24 knife drum, high vol additive, 300 hd pick up, 919 drum, 1223 engine hrs

Contact Nigel 07956 251466 GENERATORS

JF FCT1060 Pro-Tec forager,

2013, metal detector, wide pickup, electro-hydraulic controls, excellent condition. £14,750+VAT. R Maundrell Tel 07785 568800 (Warks)

SILAGE sides to ﬁt a 20t Bailey trailer, excellent condition, can easily be adapted to ﬁt smaller trailer, picture is with the sides attached. £1,000+VAT. P Wilson Tel 07971 878519/07494 689839 (Warks)

KONGSKILDE grain drying bin, air sweep ﬂoor free. F Howell & Sons Tel 01760 440297/07798 668239 (Norfolk) JCB grain bucket 7'6" wide, vgc. C Brown Tel 07979 632866/01255 870253 (Essex) TWO aeration spears & fans. S Jones Tel 07796 001370 (Norfolk) 22-66247

GENERATORS: diesel & PTO, quality used & new, est 25yrs. JSP UK Ltd. Tel 01432 353050 Mob 07774 742182 (Hereford) DIESEL generator, Cummins engine, 2017, never been used, 150kva, surplus to requirement, as new, fully enclosed, silent running, excellent. POA. R Mansﬁeld Tel 07801 864112 (Bucks)

GRAIN HANDLING/ STORAGE MARTIN Lishman Pile Dry fan. £200. S Jones Tel 07796 001370 (Norfolk) 4.5-INCH auger, 21' long, on trolley, single phase. Offers. P Freeman Tel 07711 145124 (Lincs)

K&J ENGINEERING HAVE A HUGE RANGE OF BURNERS AND SPARES IN STOCK

01621 828689

www.kjengineering.com

24 Hour call out during Harvest

SERVICE, SPARES & REPAIRS ON OIL FIRED BURNERS

KOOLS grain blower, PTO HARVEST automatic humidity

controllers. Offers. H Brown Tel 07764 477766 (Cambs)

driven, everything turns as it should. VAT @20% to be added to ﬁnal selling price. R Taylor Tel 01782 898083 (Staffs)

22-66095

8”,�10”�&�12”�dia.

CLEANER SCREENS available for most makes NEW & SECONDHAND CLEANERS AVAILABLE NEW & SECONDHAND DRYING FANS Carier Elevators Conveyors and Spares Contact Robin on 01472 753936 07710 242015

Danagri High�Capacity Heavy�Duty�Mobile Grain�Augers

OPICO Magna dryer, 12t diesel ﬁred, PTO driven, 1069hrs, gc. £10,000. M Abblitt Tel 07720 839253 (Cambs) FOUR Myson fans, Type 19G2P, 19" diameter, including Woods silencers, 2.45hp, 415 volts. £50 each. H Halgarth Tel 07711 680049 (Lincs)

BLOOMFIELD INSTALLATIONS www.bloomfieldinstallations.co.uk

66094

Ian PLOT FEEDS & CEREAL Houlgrave SEED ENGINEERING

20-66605

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

• Shelbourne Advantage, Mentor & SR 2500H • Hesston 8100, 6500 & 6400 • John Deere • Claas Maxi • Vicon • Stemas • Fortschritt

KONGSKILDE space heater. £125+VAT. F Howell & Sons Tel 07798 668239/01760 440297 (Norfolk)

22-66334

WANTED

RAPE SWATHERS & DRAPER PICK UP HEADERS

Specialising in used & reconditioned stock - Elevators - Grain driers - Dressers - Mill mix equipment - Augers - Grain plants - Installation services

USED EQUIPMENT REQUIRED!

STATIC engine with PTO drive, been running, mobile grain drier, Ford 6 cylinder, PTO engage lever, lifting bracket, starts ﬁrst time. £2,000+VAT. A Doel Tel 01225 752777/07957 820201 (Wilts)

OPICO AND MECMAR driers bought and sold. Genuine parts available nationwide. Morgan Farm Machinery. Tel: 01604 780087 Northants(T) BRICE Baker 4.5" auger on tripod wheels, 21' long, 3 phase motor, in good order, will happily trade for a good bottle of red wine. J Hare Tel 07790 855867/01799 522197 (Essex)

WELVENT automatic constant humidity controller. £300+VAT. F Hardy Tel 07957 855180 (Notts)

40-FOOT 4" Transmatic auger, needs new motor. £100. A Thompson Tel 01953 860353/07884 480302 (Norfolk) PROTIMETER with temp probe, no test. R Dunham Tel 07831 350871 (Beds)

Fabrication General engineering

Visit our website...

Debenham, Suffolk Tel: 01728 861657 Mob: 07771 646075

chriscoe@bloomfieldinstallations.co.uk

FARRELL ‘Trayler Drier’ 15t mobile grain drier (now built by Turbodan), PTO driven fan with diesel burner, uses aerated trailer ﬂoor & vertical augers, automatic cooling, truly mobile, well maintained & kept inside. S Metcalfe Tel 07540 889513 (N Yorks) QUANTITY of grain ducting. R Dunham Tel 07831 350871 (Beds) KONGSKILDE single phase centrifugal fan. £250+VAT. F Howell & Sons Tel 07798 668239/01760 440297 (Norfolk) INDOOR 40t bins, 3/4 dismantled, air ducts; also outdoor 90t bin buyer to dismantle, air ducts. D Felkus-Upton Tel 07813 553629 (Suffolk) SIMPLEX centrifugal fan, removed from drying bin system. Offers. E Clark Tel 07879 698807 (Norfolk)

PARMITER grain elevator/ conveyor, with mounted sweep auger/dust extractor (easily removed if not required), excellent working order, hopper available, forklift available to assist with loading. Buyer to collect, hence only £100. N Madden Tel 07917 221061 (Lincs)

DAG dry air generator, 7.5Kw,

installed new in 1999, always in dry, very good condition & in full working order, no longer required. C Handy Tel 01242 820295 (Glos)

170 www.farmads.co.uk July 2019

fg_class_july_19.indd 170

27/06/2019 16:16

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

Ref H1167614

Ref F1167336

2013 Case AF9230 35’ header, Price £165,000

2014 Case AF9230 40’ header, Price £175,000

Buy and sell online — www.farmads.co.uk

2017 Spearhead 5000 flail mower, Price £17,000

Ref 51157032

Ref 31156322

2008 Case STX535 7350hrs, Price £75,000

Major 1200 mower batwing, Price £1,500

Ref G1162749

2014 Lely PC330S Splendimo Price £8,500

2014 New Holland T7.270AC 7819hrs, Price £54,000

Ref 91167868

Ref C1167246

Ref C1165197

2012 Lely 320M Splendimo Price £4,250

2017 New Holland T7.260PC 1400hrs, Price £88,000

Ref 41167058

2016 New Holland T7.245PCSW 2025hrs, Price £76,000

2015 Case Puma CVX230 4444hrs, Price £62,000 Ref K1166183

Ref J1161039

Ref 81168032

2016 New Holland T6.165 650hrs, Price £46,000

2012 Case Puma CVX160 6300hrs, Price £34,000

Ref 31161934

2015 Case Puma 185HER 4650hrs, Price £56,000

2010 New Holland CR9080 2664hrs, Price £120,000 Ref 51168271

Ref 51169060

Ref 11167089

2016 Case Optum 300CVX 1897hrs, Price £88,000

2018 New Holland CR9.80 294hrs, Price £280,000

Ref 41167454

2014 New Holland CX8090 SL 587hrs, Price £180,000

Ref 11166000

Ref C1165265

Ref G1166107

2016 New Holland CX6090 788hrs, Price £132,000

2010 Case STX535 7203hrs, Price £87,500

For more stock and photos visit our website

www.ernestdoe.com

For further details contact Matt Hart 01245 380311 or 07774 499962 Wayne Middleton 01245 380311 or 07836 201571 Ulting, Maldon, Essex CM9 6QH usedsales@ernestdoe.com

62614

July 2019 www.farmads.co.uk 171

fg_class_july_19.indd 171

27/06/2019 10:47

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

VALUE

GREAT OFFERS ON PRE-REGISTERED TRACTORS PLUS 0% FINANCE OFFER AVAILABLE*

* 1+4 ANNUAL PAYMENTS AT 0% ON 50% OF RETAIL PRICE. SUBECT TO T&C’S AND ACCEPTANCE. T254 VERSU ST

T234 VERSU ST

£97,000 + VAT

£87,000 + VAT

68 REG, 60KPH, CAB & AXLE SUSPENSION, FRONT LINKAGE, WORKED JUST 190 HOURS

68 REG, 50KPH, TRIMBLE GPS, AIR BRAKES, CAB & AXLE SUSPENSION, AUTO GUIDE, FRONT LINKAGE

A114 C/W LOADER

A124 AWD

SPECIAL PRICE:

RRP £64,802

19 REG, EX-DEMO

£52,000 + VAT T174 EA

NOT YET REGISTERED, 50KPH, FRONT LINKAGE, CAB & AXLE SUSPENSION

£82,000 + VAT

  

SPECIAL PRICE:

£50,000 + VAT T214A (68 REG) 50KPH, CAB & AXLE SUSPENSION FRONT LINKAGE, UNUSED £86,000 + VAT T214 VERSU ST (68 REG) 50KPH, FRONT LINKAGE, CAB & AXLE SUSPENSION ONLY WORKED 280 HOURS £87,000 + VAT

ALL WITH 12 MONTHS’ WARRANTY CAN BE EXTENDED AT AN ADDITIONAL COST

CHOICE OF TYRE SIZE OTHER MODELS IN STOCK

Providence Foundry Foxholes Driffield East Yorkshire YO25 3QQ Tel: 01262 470221

Maxwell House, King Rudding Lane Riccall York North Yorkshire YO19 6QL Tel: 01757 249799

w w w.w i l f r e d s c r u t o n . c o . u k

172 www.farmads.co.uk July 2019

fg_class_july_19.indd 172

27/06/2019 10:48

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 66328

01362 699888 Hillside Nurseries, Shipdham Road Toftwood, Dereham, Norfolk NR19 1NP

Agriculture Ltd We know you have choices. We hope we can prove why we’re the right choice for you. Randells and Vaderstad – a 20+ year partnership where people and service matter.

Philip Watkins 8 hyd reset leg trailed subsoiler with DD packer & Opico seeder POA

Kongskilde Vibroﬂex 7.4m with front discs & spring roller packer, 2012 ARRIVING SOON

Vaderstad RDA800S with 3rd row coulter wet weather kit 2006 £25,000

Philip Watkins 9 leg subsoiler with DD & ﬂexicoil packers

Vaderstad NZA800 with RX820 crosskill roller 2001

£12,500

£24,000

Vaderstad Rapid RDA800S drill 2010, refurbished machine approx 5600Ha £43,000

Gregoire Besson Discordon 3m 5 shearbolt legs with tungsten wings, rubber packer, discs 70% £6,500

Sumo Trio mounted 3.5m with 7 auto reset legs, 2015

Dalbo Culti-lift 800 springtine harrow 8m fully mounted, 2013 £12,000

Kverneland Accord Optima 8 row mounted parallel hyd fold maize planter + front hopper £5,000

Vaderstad Rexius Twin RST830 heavy double press 2009, 3 row raptor tines, exceptional £28,500

£13,500

Buy and sell online — www.farmads.co.uk

Vaderstad Rapid RD300S trailed drill, system disc crossboard light, wheel press, 2000 £6,500

GENUINE SAVINGS ON GENUINE PARTS – don’t be fooled into cheap imitations! Call for prices now! 4 year ﬁnance (1+3 annuals) at 1% fpa on NEW Vaderstad machinery (Terms & conditions on request)

07760 772999 Bill Bailey 07887 714430 William Randell SALES

www.randells.net

Viewing is by appointment only due to machines being in various locations

Kuhn FC 314 D FF mower conditioner NEW

65 £3

75 4,

Kuhn Optimer 6m EX DEMO

Used Kuhn Espro 6m new cultivation discs

IN Case Puma 250cvx Pro 700 F-Linkage EX DEMO

Fax: 01767 677451 Fax: 01536 373392

01767 677316 01536 373238

Abbotsley Brigstock

£4

A A

OC ST

,5 £5 Kuhn GF 8702 2010 8 rotor vgc USED

Case IH Maxxum 125

Demo Case IH Puma 165 CVX f/linkage & PTO

Case IH FarmLift 742

£6

A B

Further details of our machinery stock can be found at

07887 524281 Paul Roegele SERVICE

Kuhn TBE 222 VKM & BPR shredders NEW

Kuhn GF502, GA 4321, GA3201 rakes, GA5021& GF 6502 gyro tedder haybob 360 NEW

www.collingsbrothers.co.uk email: jason@collingsbrothers.co.uk

66241

Please visit our website to view our full range of new and used machinery available

July 2019 www.farmads.co.uk 173

fg_class_july_19.indd 173

27/06/2019 11:56

SUPERTECH grain moisture meter, vgc, with recent 2019 calibration certiﬁcate, instructions & case. £140 ono. J Jordan Tel 07535 990066 (Suffolk)

GRAIN HANDLING/ STORAGE (cont) SINGLE phase auger, 11' x 4.5". C Brown Tel 07979 632866/01255 870253 (Essex)

Welvent Mobil

Gas Dryer ISEKI ride on, diesel 13.5hp,

& does an excellent job, currently has Sanderson/Claas brackets ﬁtted, 8' wide. £400. J Mayes Tel 07769 675104 (Essex)

VARIOUS augers. S Jones Tel 07796 001370 (Norfolk) OPICO 380 9t grain dryer, electric motor or PTO drive, gas ﬁred, stored inside. £2,950 ono. W Beers Tel 01604 781494/07712 435168 (Northants) ASTWELL 30' x 6", tripod, 3 phase grain auger & hopper, pneumatic tyres. £100+VAT. T Thorne Tel 07703 541746/01525 221400 (Beds) FYSON 40' rubber belt 3 phase grain elevator. £500 ono. P Hinch Tel 07866 604132 (Leics) MECMAR grain dryer, 20t, fully automatic with all cleaning system, electric drive, diesel burner, 2016, only done 79hrs from new, never been outside, immaculate. POA. R Mansﬁeld Tel 07801 864112 (Bucks)

Over 40 years’

experience specialising within the agricultural 01621 828689 industry www.kjengineering.com Grain store power including LED/ACCS lighting

POA Grain store (Humidifier) Model: Welvent GA-110-E complete with RH Sensor, Excellent Condition For further information please call Rob on

07702 520447

rob@cadwaladr.co.uk

2010, grass collector, 360hrs, call for more info. £2,450. I Cowell Tel 07788 985544 (Essex)

VOTEX mower, 8', average condition. £300. N Bailey Tel 01206 230511 (Essex)

TRANSMATIC 30' hydraulic grain auger, 6". C Brown Tel 07979 632866/01255 870253 (Essex)

Bespoke control panels or modification of existing panel

LANDMEC Swathwilter, good

working order. A Simpson Tel 01738 840111 (Perth & Kinross)

Control panel fault finding New installation wiring or rewiring

Testing & Certification of installations for insurance purposes Testing & Certification for periodic or tenancy renewals

HARVEST automatic constant

All work carried out to

18th Edition

22-66497

humidity controller. £600+VAT. F Hardy Tel 07957 855180 (Notts)

HOMEMADE grain pusher, pin & cone ﬁttings. £400 ono. P Hinch Tel 07866 604132 (Leics)

GRASS MACHINERY

BOMFORD tri-wing topper,

RECO Ferri 2.7m ﬂail, new blades, c/w rear roller & wheels, hydraulic operated rear door. £2,250 ono. S Bartle Tel 07884 238552 (Notts) HOWARD Harvester grain

ﬂow drier, lived inside, 2 drying decks, 1 cooling, 12tph, diesel. S Elwess Tel 07825 446321 (Lincs) KONGSKILDE SUCT 300, blower pipes, bends, loading stand, etc, from small farm. D Felkus-Upton Tel 07813 553629 (Suffolk)

blower. Offers. R Reed Tel 07533 997915/01289 387233 (Northumberland)

JOHN Deere 540X ride on mower, power steering, hydraulic lift deck, fuel gauge, EdgeXTRA 42" cutting system, low running hours, good order. £2,995 ono. R Hopkinson Tel 07976 424263 (Lincs)

• Fans – New & Reconditioned • Grain Stirrers • Air Tunnels • Laterals • Drive On Floors • Gas Burners • Controllers & ACCS Equipment Coningsby, Lincoln t: 01526 342466 f: 343507 e: sales@pellcroft.com

www.pellcroft.com

GRAIN ventilation ducting,

FIFTY-FOOT 6" belt with 5.5" cups, for a grain elevator. £100. R Sinkler Tel 01377 270251 (E Yorks)

SIX wooden grain partitions,

8' length, 8' height. Offers. J Suckling Tel 01440 730367/07771 970820 (Suffolk)

ZAGAVOLTER 3m hay turner, 2002, done very little work, some spare tines, good condition. £500+VAT ono. J Nott Tel 07957 146325 (Norfolk)

VICON Athlete (5 wheel Acrobat) swathe turner, good condition. £200+VAT. M Seabrook (BD Seabrook & Son) Tel 07754 165841/01621 860382 (Essex)

POTTINGER Novacat 305H

mower conditioner, very good mower, new lift ram & curtain last year. £2,800. L Wilderspin Tel 07938 565851 (Cambs)

Pellcroft Engineering Ltd

strong perforated plastic pipe, 250mm dia 9.6mm thick, 5 x 6m 6 x 3m, couplers included; also 10 x 3m solid twin wall same size, for ends. £850. P Crudge Tel 07889 328299/01608 658133 (Oxon)

CLAAS Liner 470S rake, swivel headstock, vgc, good tines & tyres. £3,950. L Rich Tel 07774 112211 (Glos)

Security lighting

TW4600, 4.6m, 2005. GW Harrold & Partners Tel 07836 751076 (Norfolk)

BENTALL Simplex continuous

SPEARHEAD 9' wide topper, triple blade hubs, spare set of new blades, tidy machine. £1,100+VAT. Pears & Son Tel 07770 382563 (Lincs)

22-66501

GRAIN pusher, old but straight

extension, 3 phase, wide hopper, recent service, oil change & ﬁlter. £2,250+VAT. R Lane Tel 01234 740241/07703 280255 (Beds)

22-66099

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

FYSON elevator, 33' with

NAUD mounted heavy duty grass/scrub cutter/mulcher, heavy rotor ﬂails, in good order, 4m wide with 4 swivel depth wheels. £2,900+VAT. R Lane Tel 07831 615912 (Cambs)

LOGIC ﬂail mower, self propelled, for use with quad bike, straight condition. £1,750+VAT ono. S Parrish Tel 07785 502436/01992 572511 (Essex)

VICON Acrobat hay turner, gwo. £100 no VAT. B Steel Tel 07835 518533/01206 211419 (Essex) VOGEL & Noot 1.8m rear ﬂail, hydraulic off setting, owned from new, barn stored, ideal for smaller tractor. £1,500+VAT. WR Kerfoot & Partners Tel 07539 933777 (Lincs) LELY Splendimo mower conditioner, 2.8m, spares or repair. £600. B Clarke Tel 07799 881727/01953 857406 (Norfolk)

BAMFORD Wufﬂer, used

condition, used last season, great for haymaking, only a couple tines broken, but comes with spares, PTO shaft included, grab a bargain & get the haymaking done while we still have the sunshine. F Johnson Tel 01507450203 (Lincs)

BAMFORD Wufﬂer, broken down to a pallet of spares, including tines, belt, wheels, doors & so on. Sensible offers. F Johnson Tel 01507 450203 (Lincs)

S GUID FARMER PLEASE MENTION TO ADVERTISEMENTS WHEN REPLYING

174 www.farmads.co.uk July 2019

fg_class_july_19.indd 174

27/06/2019 16:20

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

Rodney Cowle Machinery

Over 25 combines in stock – see our website for details

We can supply New Parts for your Combine • CONCAVES • RASP BARS • BELTS • KNIVES 2006 Claas Lexion 550 Montana 2010 Claas Lexion 560 Terra Trac 6 walker machine, V750 Vario header, with V660 header, chopper, chaff • CLEAN GRAIN, RETURN & 1400/2000hrs, 3D sieves, chopper/ spreader, 1100/1600hrs FRONT ELEVATOR CHAINS chaff spreader, very nice machine • IMPELLOR PLATES • RETRACTABLE FINGERS • FILTER KITS and many other wearing parts in stock MAIL ORDER

2009 Claas Lexion 570+

V600 Vario 3D sieves chopper/chaff spreader auto contour, yield/ moisture 1000/1300hrs

V750 header, 900/32 tyres, chopper/ chaff spreader, 900/1200 hrs, in very nice condition

2010 New Holland CX 8070

2014 Claas Lexion 630 V600 vario 2015 New Holland TC 5.80 3D sieves, chopper chaff spreader, only 500hrs, in like new condition

16’ varifeed, smart sieves, chopper, chaff spreader, only 400hrs, like new.

1998 New Holland TX63

2005 New Holland TX66

2009 Claas Tucano 430

2015 Claas Lexion 620

2010 Claas Lexion 520 choice of two, one with V600 Vario & one with C600, both 3D sieves, chopper & chaff spreader – ring for full details & hrs

24ft, varifeed, 1250/1500hrs SL Sieves, chopper/chaff spreader

SL sieves 20’ laterial ﬂoat chopper/ chaff spreader only 1200/1400hrs 1 owner from new

Rodney

07831 178271 Steve

07786 391816

Great Punchardon Farm Winkleigh Devon EX19 8DJ

£95,000 2016, MF7345S (MCS) 18ft Freeflow header, lifters, dividers, Shelbourne Trolley, Extra worklights, wide angle mirrors, 800/65R32 & 540/65R24, 300 Engine / 175 Drum Hours. Call Andrew Whiteley: 07774 296382

£80,000 2016, JCB4220 Front Linkage, Field Pack, 600/60R30 Tyres Good Condition 3752 Hours. Call Ian Hopper: 07774 296379

£80,000

Sl sieves 20’ cut auto ﬂoat, chopper 1900/2300hrs, nice tidy machine

1200/1500hrs, V600 vario, 3D sieves, chopper/chaff spreader

with C560 auto contour, 3D sieves, chopper, chaff spreader, only 160 eng hrs, from retired farmer like new

email: sales@rodneycowlemachinery.co.uk

£39,500

•

www.rodneycowlemachinery.co.uk

£32,000

£68,500

66406

£23,900

2015, MERLO 42.7 Turbo Farmer Loadall C/w 405/70R24 tyres, Good Condition 3027 Hours

2014, 741 ELITE CRC, Air Con, 40kph, 460/70R24 5000 Hours

2017, JCB 535/95 AGP New Q Fit Carriage & Tines, LED Lights, 500/70R24 Tyres Excellent Condition 1334 Hours

2011, JCB 514/40 C/w Compact Tool carrier & forks Good Condition 2773 Hours

Call Matthew Ashton: 07827 341048

Call Rob Law: 07740 781688

Call Dennis Hart: 07824 016116

£86,500

£65,000

2017, VALTRA T214D Sub Metre Autoguide with C3000 Screen, CVT, 4 Spools, Front Linkage, Evo Seat, Auto Cab Suspension, 160L/ min Hydraulics, 600/75R38 & 600/65R28. 1338 Hours Call Max Pinney: 07795 128281

2016, MF7718 EX D6 No Front Linkage or Guidance, 480/70R28 & 580/70R38 Tyres, Balance of 5 Year 3000 hour Maufacturers Warranty 1488 Hours Call Ian Hopper: 07774 296379

2016, MF5612 EF D4 540/540E/1000 PTO, Quadlink Front Axle & Twin Beacons. Dyna 4 - 40kph 340/85R28 & 420/85R38 5721 Hours Call Ian Hopper: 07774 296379

2014, CHALLENGER MT765D 30” Tracks, 8 Idler Weights, Debris Deflectors, Agi 4 Guidance Very Good Condition 6369 Hours Call Matthew Ashton: 07827 341048

Search Through More Used Tractors And Machinery Online At:

£62,000

£69,000

£75,000

£43,000

Buy and sell online — www.farmads.co.uk

01837 83645

2010 Claas Lexion 520

2010, CHALLENGER MT765C 30” Belts, Wide Drivers and Mid Wheels, 8 Idler Weights, Good Condition. 5506 Engine Hours

2015, FT828 S4 Variogrip, VF600/70R30 & IF710/70R42 Good Condition 5986 Hours

2011, RG645A 32M Chafer Boom, 5200L Tank, 380/90R46 Rowcrop wheels, 620/70R42 5030 Hours

Call Clive Parker: 07717 990778

Call Adam Clubley: 07771 843080

Call Marcus Bourne: 07774 296390

Peacock.co.uk

PEACOCK & BINNINGTON

All prices exclude VAT | E&OE

Brigg: 01652 600200 | Corringham: 01427 838696 | Halsham: 01964 614233 | Louth: 01507 353500 | Selby: 01757 700699 Quality Used Machinery At Affordable Prices! Sales, Service & Parts Depots Across Lincolnshire & Yorkshire

July 2019 www.farmads.co.uk 175

fg_class_july_19.indd 175

27/06/2019 16:23

East Anglia’s ﬁrst choice for new & used tractors

Valtra T194D 2017 2652hrs gc 21047265

Valtra T163V 2014 2722hrs vgc 61046335

Fendt 724 2015 5891hrs 21047409

Fendt 716 2015 5275hrs gc 51046789

Fendt 516 ex demo 2018 162hrs 51044878

Challenger RG655C 2015, 5500hrs, good condition 41046608

MF 2290 2014 51136 bales 51047439

£6 8,0 00 £2 9,9 50 £9 9,5 00

MF 5465 2010 2988hrs vgc 51047256

Fendt 720 2018 vgc 1452hrs 41047512

£7 3,0 00

£4 1,5 00 £7 2,5 00

Fendt 724 2016 4400hrs excellent 31047528

MF 7720 2016 1271hrs vgc with warranty 51044552

Valtra T234V 2016 gc 4000hrs 21045725

£6 0,0 00

£8 8,5 00

£1 15 ,00 0 £5 1,0 00 £8 7,5 00

MF 7616 2013 4800hrs gc 51047204

£9 3,5 00

£1 18 ,25 0 Fendt 718 ex demo 2018 1125hrs 61044703

MF 7720S ex demo 2018 93hrs 61044596

£6 2,0 00

Fendt 720 2016 vgc 3847hrs 61045102

Fendt 828 2014 vgc 4000hrs 31047266

£4 6,5 00

£8 7,5 00

Fendt 828 2016 4557hrs excellent 51046161

MF 7620 2014 4750hrs vg 31047405

£7 4,9 50

£1 10 ,00 0 £9 4,0 00 MF 7720 ex demo 2018 10hrs 31044861

MF 7726S ex demo 2018 575hrs 61044420

£1 29 ,00 0

£1 16 ,00 0

MF 7718 2016 2100hrs vgc 41046564

MT775E 2014 good condition 61047588

£8 7,0 00

£1 25 ,00 0 £6 0,0 00

MT765E 2013 2301hrs vgc 31047434

£7 4,0 00

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Call 07798 585624 • jamesclark@tnsgroup.co.uk

MF 2190 baler 2013 gc 31045503

See our full range at www.tnsgroup.co.uk

66366

Prices do not include VAT or shipping

176 www.farmads.co.uk July 2019

fg_class_july_19.indd 176

27/06/2019 10:49

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

LELY Lotus Stabilo 600, great

for hire

HAYTER topper, in working order, PTO driven, c/w second topper for spares, buyer to collect. H Osborne Tel 07917 353595 (Suffolk)

23-65600

FELLA 6 wheel tedder, full set of tines, ready for use. R Garner Tel 07768 821476 (Cambs)

machine, 4 rotas, with Lely hooked tine, tedder & rake, c/w gates, has had plenty of use, seen the welder a few years back, good tyres, was main tedder till this season. £1,100+VAT. J Hatton Tel 07803 721236 (Essex)

SUMO

SPEARHEAD Quadsaw LRS2001, in excellent condition, four 500mm saw blades, can cut tree limbs up to 150mm diameter, used once since purchased. £1,700+VAT. P Wilson Tel 07494 689839 (Warks)

grassland subsoiler

• improves structure and drainage • relieves compaction for

better yields and extended turnout 120+hp tractor needed or • one supplied with driver

P Ward 01986 785343

Mobile 07860 893058 North Suffolk area

EVEN Creep Mini MkI market garden irrigator, auto hose pulling, 3 wheel rain gun, c/w hoses & electric pump, has been used off garden well, may be seen on farm at Somerleyton. £350 the lot (trailer not included). G Richmond Tel 01502 730387 (Suffolk)

Serving farmers across the South of England For all your irrigation requirements

Mobile UV treatment units

Briggs Irrigation main distributor

01243 792323

BOMFORD B577 hedge

cutter, electric controller, tidy condition. £2,500. S Parrish Tel 07785 502436/01992 572511 (Essex)

BROWNS 4.5m Slitmaster, little use, stored inside, ideal for pasture & marsh meadow rejuvenation, hardly any wear on the blades, extra wing weights, double acting hydraulics, nice tidy machine, minimal sward surface damage. £2,950 ono. I Skinner Tel 07813 132073/01508 498986 (Norfolk)

DUUN ST2440 log deck, 4yrs old, bought new, hydraulic feed, very good condition, added 2 extra intermediate rails for handling shorter timber, used alongside Posch 360 machine, can be seen working, upgraded hence sale. £1,400. C McCracken Tel 07899 951240/01206 230136 (Essex)

CUB Cadet, Model 1223, c/w 50 cutting deck, 183hrs, gwo. POA. M Robson Tel 07967 139678 (N Yorks)

BRIGGS Mk2 irrigator + plastic pipe. £1,000+VAT. J Staight Tel 07761 631549 (Essex)

TWELVE genuine McConnel

FLAT roll, 8' working width,

JOHN Deere GX355 diesel

ride on mower, 1016hrs, new engine 20hrs ago, hydrostatic gearbox, power steering, 48" cutting deck, c/w mulching kit or collector box, good condition. £2,250. D Smith Tel 07929 561955 (Herts) MCCONNEL rear ﬂail, 2.2m, hydraulic off setting, very tidy, barn stored, gwo. £1,200+VAT. WR Kerfoot & Partners Tel 07539 933777 (Lincs)

32" diameter, concrete ﬁlled. £500. N Osborn Tel 07885 625416/01444 461976 (W Sussex) KUHN GA 4121 GM Masterdrive rake, good condition. £1,800. B Clarke Tel 07799 881727/01953 857406 (Norfolk)

hedge cutter ﬂails, Part No 21904.01. GW Harrold & Partners Tel 07836 751076 (Norfolk)

£975. M Robson Tel 07967 139678 (N Yorks)

LAND/PROPERTY

FORDWELL saw bench,

2016 Bomford 6.5 EVO 6.5m

working order, blade & belt included. J Crooks Tel 07711 137195/07747 771769 (Suffolk) BOMFORD B435 3pt linkage, side arm hedge cutter, ideal for 50–100hp tractor, gwo, barn stored. £1,400+VAT. WR Kerfoot & Partners Tel 07539 933777 (Lincs)

HEDGING & FORESTRY

IRRIGATION/ DRAINAGE

ELITE Major 4S, 55mm intake, as new. £1,475. M Robson Tel 07967 139678 (N Yorks)

hedgecutter, c/w variable forward reach arm, 5’ Pro Cut head, electric controls, very tidy

24-66541

POA SISIS Tilth n' Seed seeder, gwo.

PERROT 100/400 reel, good pipe, no rain gun, ideal header main or to feed a boom, 3 available. £1,600 ono. G Blandford Tel 07973 424473 (Hereford)

Buy and sell online — www.farmads.co.uk

REYTEC KA550 variable forward reach hedge cutter, 5.5m reach, electric proportional controls, head ﬂoat, 2015 model but didn’t work until 2016, great machine, but just need a bit more reach for new contract. M Lake Tel 07767 265716 (Herts) POSCH 30t Splitmaster log splitter, 2013 model, very good quality, 2/4-way split on hydraulic up & down, hydraulic log loading, will take just over 1m log, 540 PTO, pictures provided on request, no time wasters please. £4,250+VAT. A Miller Tel 07709 228392 (Essex) SPEARHEAD Twiga 655T, very little work, ex demo machine, 400hrs max, factory refurbished head, 2017, hydraulic proportional controls, reversible rotor. £12,500 no VAT. P Bowers Tel 07920 113451 (Essex) MCCONNEL PA93 hedge cutter, full working order, good clean condition, 1.2m head, cable controls, on farm from new. £4,995+VAT. N Cowell Tel 07887 480579 (Essex) NEW Oxdale TM400 hydraulic log splitter. POA. www.mktractors. com. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

GRASS MACHINERY (cont)

www.tvmachinery.com Tel Mike 07764 835562(T)

ALUMINIUM irrigation pipes, forty 4" x 30' long, plus twenty 3" x 35' long. £1,800 the lot. R Edwards Tel 01432 820158 (Hereford) WRIGHT Rain irrigation pipes & various couplings, approx ﬁfty 5", in good condition. £30 each to take the lot. D Murrell Tel 07850 724139 (Norfolk)

20-ACRES or more sought, with barn & ideally outbuildings, for grazing in Suffolk, long term lease required, excellent references, moving due to land development. J Turner Tel 07747 755556 (Suffolk)

July 2019 www.farmads.co.uk 177

fg_class_july_19.indd 177

27/06/2019 16:35

U S 20 A NIT TO 18 VA S C IL N K A O BL W E

www.cfsukltd.co.uk

Chris: 07808 703325 Adam: 07802 776113 High Quality, Low Houred, Used Agricultural Machines. WARRANTY ON ALL TRACTORS.

email:sales@cfsukltd.co.uk

UK Ltd

New Holland T7.210

£68,500

£64,500

2018, Range Command, Side Winder, Front Links & PTO, Mid Mount Valve, GPS Ready, 1043 Hrs,

New Holland T7.190 2018, Range Command, 50KPH, 1266 Hrs,

£56,500

New Holland T7.190

New Holland T7.210

New Holland LM7.42

£62,500

£58,500

£57,500

New Holland T6030

New Holland Boomer 3050

New Holland T3040

£28,500

£17,950

£16,950

2018, Power Command, 888 Hrs, Front Linkage

2018, Range Command, 1129 Hrs, Front Links & PTO, GPS Ready

Case Maxxum 150 Multi Controller

£52,750

66 Reg, 1480 Hrs, 50KPH, Air Brakes, Quicke Q55 Loader

2010, Electro Command, 40KPH, 3470 Hrs

2018, 778 Hrs, 6 Speed Auto Shift, PUH

2018, Range Command, 50KPH, 1261 Hrs

Easy Drive, 2016, 662 Hrs

2016, 1240 Hrs, 54HP, Air Con

CFS TRACTOR HIRE, LONG & SHORT TERM HIRE AVAILABLE, PLEASE RING NOW FOR DETAILS ON 01865 880866! MANY OTHER NEW HOLLAND MODELS AVAILABLE – CALL FOR DETAILS

SPREADERS TRAILERS & TANKERS

The Independent Spreader Trailer & Tanker Specialists Specialists

Specialists

ECE

Specialists

SPREADER, TRAILER & TANKER HIRE

2018 BROUGHAN Mega High Speed trailer BUNNING

2013 MAJOR 3500 gallon tanker

BROUGHAN 34’ high speed ﬂat trailer

TRAILERS

2009 LOWLANDER WIDE BODY 230, twin vert auger spreader with twin axles 2009 LOWLANDER 150HD MK2 580/70 x 38 radials, wide body vertical augers, 20mm chains, guill. door, close spacing ﬂoor bars, vgc 2005 LOWLANDER 90 Mk4 twin vertical auger spreader, 18.4x34,14 ply tyres, hyd brakes & lights, vgc

TANKERS NEW HISPEC 4000 gallon vacuum tanker, BKT 560/60x22.5 radial ﬂotation, high speed spec, etc, etc JOSKIN 5.6m r/disc injector unit with mascerator 2013 MAJOR 3500 gallon, non recessed, twin commercial axles & inverted bogey multi-leaf susp, 650/50Rx22.5 ﬂotation radials, air/hyd brakes, galv, r/worklights, beacon, mudguards, s/d/bar, 11000L PTO pump, front inspection hatch, rear 600mm door etc, etc

2017 STEWART GX18-23S silage trailer

NEW STEWART GX18-23S grain trailer

NEW 2019 BROUGHAN 34’ h/duty, full hi speed spec, flat trailer EX HIRE 2018 BROUGHAN 18t HD mono grain, 22’x8’2”x5’, 23cu/m, all full comm hi speed spec, air brakes with ABS & LSV, hyd door with auto locking, rollover cover assy, f/gantry access platform, BKT 560/60x22.5 flotation radials, s/d/bar, full LED lighting with extra lights, crash bars, arched full width f/window, mudflaps all round, etc, 6 weeks grain hire only 2007 BUNNING 14/18 18t mono tipping trailer, 22’x5’ body, full comm high speed axles & tandem parabolic spr susp, air/hyd brakes, ABS & LSV c/w parking brake, Michelin 600/50x22.5 radial flotation tyres, hyd t/door with grain chute, s/d/bar, mudguards, full LED lighting, rollover cover, 60o tip, single chromed tipping ram, vgc 2009 JPM SPECIAL 19t twin axle low loader with wells for large wheels, wide body, hyd ramps, etc

2019 HISPEC 4000 gallon tanker

Silage Sides Kits to ﬁt STEWART GX18-23S trailer

WANTED – TRAILERS & ALL Visit our MODELS BUNNING SPREADERS Contact Alan 01263 861500 • 07887 722978

2012 STEWART GX 15 15t ﬂat trailer with options

2013 STEWART GX20-24S 20t, full high speed spec, 560/60x22.5 radials, rollover cover, silage sides, etc NEW 2018 STEWART GX18-23S 18t, full high speed spec, with ABS, BKT 560/60x22.5 tyres, 22’x8’x5’, s/d/ bar, arched front window, rollover cover, silages, etc 2017 STEWART GX18-23S 18t, full high speed spec, air brakes with ABS & LSV, 560/60x22.5 radials, silage sides, rollover cover, arched window, etc, ex hire, vgc 2012 STEWART GX15 15t flat trailer 28’x8’4” c/w hardwood floor, twin comm axles & 4 leaf parabolic susp, as new 385/55x22.5 comm s/singles, hyd brakes, removable canopy frame with alloy roof, r/hyd pusher unit, s/d/bar, vgc 2006 STEWART GX15 FT 32’ 15t flat, hardwood floor, hyd brakes & h/brake, lights, twin comm axles & susp, 385/65x22.5 comm tyres, fixed headboard c/w f/& r/ hay ladders, vgc 2011 STEWART 15t low loader, 435/50R19.5 radial tyres, air/hyd brakes with ABS & LSV

2009 JPM Special low loader 19t with wells for large wheel machines

2006 STEWART 32’ livestock float & trailer unit, full hi speed spec, 435/50R19.5 radials, excellent STEWART TRAILER SILAGE SIDES KITS (new current style) with reversible blowboard to fit GX18–23S models WIEWIADOW CAR Transporter 13’ x 6’ with twin axles, brakes & h/brake, lights, flat boarded floor, ramps, steel frame with shaped fitted yellow canopy cover with opening sides with mesh under, a very good all rounder for various tasks, vgc

OTHER 1996 ECE 10t Lowline, twin vert augers, 18.4x34 14 ply tyres, inner controlling door, previous major overhaul & repaint, vgc 2007 GYRAX 12t twin vert auger spreader, 23.1R26 wheels, single axle, s/d/bar, guill door, v clean & in gwo 2004 K TWO 1200 12t, 580/70x38 radials, guill door, rear d/bar, ﬂared body, lights, hyd brakes, very clean & in vgc

2009 BUNNING Lowlander Widebody 230

website for further photos and details email: sasspreaders@gmail.com

2006 STEWART 32’ ﬂoat & trailer unit, HI SPEED

2007 BUNNING 14/18t high speed trailer

OTHER SPREADERS & TRAILERS

COMING IN – Contact us for details

66245

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

01865 880866

For more pics and info visit our website

web: www.sasspreaders.co.uk

178 www.farmads.co.uk July 2019

fg_class_july_19.indd 178

27/06/2019 10:53

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

JOHN DEERE 5100M 2014,3814 hours, 16/16 synchromesh, 40K, Front Loader H260, Air seat, Hydraulic Brakes, Tool Box, Bonnet guard, work lights, belt line lights, quick release loader bracket, 3 SCV’S, hitch Window #31007834

£29,995

#21008972

£38,500

#11007875

£47,495

JOHN DEERE 6150R 2014, 2169 Hours, Direct Drive, 50K, TLS with front brakes, Turnable Fenders, Cab Suspension, AutoTrac, GreenStar, ISOBUS, Passenger seat, Premium Heated Air Seat, Rear Fender Lights, Belt Line Lights, Twin Flashing Beacons, 3 ESCV’s

#11008620

£64,995

#21008612

JOHN DEERE 5100GF 24x12 power reverser transmission, 380/70/28 rear tyres, 280/70/20 front tyres, Hydraulic trailer brakes, Additional fuel tank, Turnable front fenders, Rear pick up hitch

CHALLENGER ROWGATOR RG645 2011, self propelled, 4100 hours, 5000L Tank, 30m Boom, 40k, TopCon Guidance & section control, Norac Boom levelling 5 sensor, centrifugal pump, boom lights, 5 way nozzle body on air, variable geometry

JOHN DEERE 732 SPRAYER 2013, 24m boom, 3200L capacity, 420/85R38, steering draw bar

#31009244

#21008081

#21005484

£19,995

£24,000

£65,000

JOHN DEERE 6210R 2014, 2795 hours, AutoQuad, 50K, TLS, Turnable Fenders, Rear Fender Lights, Belt Line Lights, premium seat, passenger seat, 3 SVC’s #21007912

FRUIT

NEW TYRES JOHN DEERE 8360R 2012, 5331hrs, 50K, IVT, ILS, MFWD, 5 x ESCV’s, 540/540E/1000, PTO, drawbar, PUH, hydraulic and air brakes, iTec, AutoTrac ready, air seat, passenger seat, air con, electric heated mirrors, rear wheel weights (205KG) #31007514 £89,995

£85,000

JOHN DEERE 6110R 2017, 550 Hours, AutoQuad plus, 50K, Four Wheel Drive,Pick Up Hitch, Drawbar, 3 SCV’s, passenger seat, 420/85R24, 460/85R38

Buy and sell online — www.farmads.co.uk

JOHN DEERE 6115M 2013, 2277 hours, Front linkage and PTO Hydraulic top link, 520/70R38 50%, 420/70R24 50% 540/540E 1000 PTO Air seat, Autoquad 40K

JOHN DEERE 5100M 2017, 664 Hours, 16/16 synchromesh, 40K, Front Loader 543R,3 SCV’s, Belt line lights, Twin Beacons, Passenger seat, Air seat, Michelin 13.6R24 95%, Michelin 18.4R34 95%.

£69,995

FRUIT JOHN DEERE 5100GF 24x12 power reverser transmission, 380/70/28 rear tyres, 280/70/20 front tyres, Hydraulic trailer brakes, Additional fuel tank, Turnable front fenders, Rear pick up hitch

#21005486

£19,995

JOHN DEERE 5430I 2012, 4029hrs, 40K, boom 30/15m, multiple functions hydro handle, hydrostatic 4 speed ranges, air seat, passenger seat, hand wash tank, rinse tank 400L, 4000l tank capacity, solutions command panel #31007352

£85,000

Stockbury: 01795 843250 | Framﬁeld: 01825 891111 | Ivychurch: 01233 225775 Call Harry Durrant 01795 502744

www.burdenbrosagri.co.uk July 2019 www.farmads.co.uk 179

fg_class_july_19.indd 179

27/06/2019 10:59

BEN Nevis egg grader. £150 ono. A Shackleton Tel 07971 552879 (Berks)

ARABLE land required to rent/ contract farm, by small family business, any acreage considered, please call to discuss. N Finbow Tel 01728 602115/07825 925580 (Suffolk)

LIVESTOCK COLLIE puppies, short haired, black & white, from well bred working parents, both parents are good natured & can be seen with the pups, will be ready at 8 weeks – 13th July, no papers as pregnancy unplanned due to extra curricular activities at lambing time. Hence price of £350 each. Contact Fiona Shaw on 07860 485823. Hertfordshire.

Anglia Quality Meat

ArmAdillo Arc LAMB creep feeder. £200 ono.

A Parris Tel 07712 176358 (Essex)

PEDIGREE Limousin bull, 2.75yrs, TB4 area, easy calving, calves can be seen, closed herd, halter trained, good shape. P Mann Tel 01480 811969 (Cambs) SIMMENTAL pedigree bull, 16 months old, well grown & ready for work, good feet & temperament, IBR & Johnes accredited, BVD vaccinated. S Evans Tel 07754 416826 (Northants)

WANTED Registered Angus Finished Cattle

TEAGLE Tomahawk 4040 straw giraffe, hydraulic ﬂap, only used for straw, stored inside. A Simpson Tel 01738 840111 (Perth & Kinross)

PEDIGREE Llanwenog yearling ewes (5), ready to tup this autumn, can be seen S Wilts. M Brain Tel 01794 884355 (Wilts) STARLYNE universal feed blocks, suitable for cattle & sheep, expires 14/09/2019. 20 blocks for £200 or £10 each. A Dockerill Tel 01223 835029 (Cambs) PEDIGREE polled Hereford bulls, 18 months old, TB4 area, good pedigrees & calving ease ﬁgures. J Speirs Tel 07979 463480 (Beds)

Premiums paid Contact: Tim Leigh

01763 241222

 insulated twin skin  increased yield  Flip up plastic fender

TWIN track chain feeder with approx 600' of chain, trough & ﬂoor legs, single phase motor, full working order; also single track unit. Will split. £250 the lot. K Munton Tel 07815 559485 (Notts)

contentedproducts.co.uk

01353 862 044 SHEEP equipment, hurdles, lamb weigher, turnover crate, footbath race, creep feeders & hay racks. P Hinch Tel 07866 604132 (Leics)

Rotogrind

from

Weekly Prime cattle, sheep & store cattle sales Weekly Poultry sales Pedigree Livestock Sales Farm Sales and Valuations Fortnightly sale of Pigs Annual rare breed sale Deadweight Cattle sales Straw and Fodder Sales

FOUR Aberdeen Angus X heifers, 27 months old, ready for bulling. £900 each. C Coe Tel 01268 545628/07759 978699 (Essex)

SIXTY red chicken bell drinkers,

clean, chicken free for 1 year, c/w approx 300' piping & valves. £150. K Munton Tel 07815 559485 (Notts)

COMMODORE sheep turnover crate, used, but tidy. £150 ono. A Parris Tel 07712 176358 (Essex) CHAROLAIS bulls, excellent pedigrees, good temperaments & halter trained, ready to work, visitors welcome by appointment. (Wissington Charolais). J Rix Tel 07850 796057/07500 904462 (Suffolk)

28-66579

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

LOOKING for 100 acres of land to rent, must have water supply or be willing for us to supply a borehole & be suitable for livestock. Please contact Daniel & Jake Munson on 07939 929943 or 07802 658623, JD Livestock.

28-66512

28-65544

LAND/PROPERTY (cont)

SPIUMATRICI Quick 11 dry turkey plucker, only used for 1 season (750 birds), so as new, includes gantry. £2,000+VAT. A Parris Tel 07712 176358 (Essex)

£75. G Spence Tel 07778 975515 (Lincs)

pedigree bulls & females, quiet & easily handled, all bulls halter trained & guaranteed under Hereford Society rules, TB4 area. DC Smith & Sons Tel 07971 694912/07885 594143 (Suffolk)

PEDIGREE Hereford cows & heifers from our top quality polled herd, in calf to a selection of prize winning bulls, www. bitternherefords.co.uk. C Blaxell Tel 07768 171979 (Norfolk)

TEAGLE Tomahawk 8100 straw spreader, with swivel chute, bluetooth control, extension on back door, extension on chute, bought in 2017, very good condition, like new. £10,000+VAT ono. R King Tel 07929 424474 (Notts)

Buy and sell online

www.farmads.co.uk

01664 562971

www.meltonmowbraymarket.co.uk

THREE pedigree Beef Shorthorn heifers, 14–15 months, sired by Tofts Winner, Elite Health Status, TB4, all enquiries welcome. I Rickatson Tel 07789 691474 (Beds)

BUTLEY Herefords registered COW crush with wooden ﬂoor.

Scalford Road, Melton Mowbray, Leicestershire, LE13 1JY

KUHN 850 diet feeder, old but good. £1,000 ono. A Little Tel 07803 156024 (Rutland)

NEW Zealand Romneys, ﬂock reduction of breeding ﬂock, 100 gimmers that have lambed, some older ewes & rams, all home bred. J Kiddy Tel 07860 452972 (Cambs) SIMMENTAL X Blue bull, well bred, TB4 area. R Hopkinson Tel 07976 424263 (Lincs) SIXTY used plastic water troughs, 240cm x 24cm, good condition, collection only from Thetford, Norfolk. POA. J Bucher Tel 07968 106549 (Norfolk) SUFFOLK shearling rams, well bred with good growth & conformation, select early & have choice, can be collected when needed or can be delivered. R Woolway Tel 07971 575532 (Cambs)

£18,500 + VAT

mills straw, grain, roots, suitable for animal feed, biogas, green waste, etc,10–20tph throughput

01789 205132

www.enegis.co.uk

NORTH Country Mule shearlings (70), bought from NEMSA sale at Skipton in September 2018, all Heptavac P, wormed & cliked, etc, please contact for further information. P Shipp Tel 07788 131508 (Norfolk)

KUHN Primor 3570M straw spreader & big bale silage feeder, 2015, swivel chute, hydraulic back door, as new condition. £7,950+VAT ono. W Varnam Tel 07871 432440/07975 855514 (Warks)

SHEEP plastic foot bath, approx 10', used. £50. A Parris Tel 07712 176358 (Essex)

LOGIC Multifeeder, 2017. £750 ono. P Hinch Tel 07866 604132 (Leics)

PEDIGREE Hereford bulls, top quality sires from our High Health CHeCS accredited herd, polled genetics from our prize winning easy calving bulls, 4yr TB testing area, www.bitternherefords. co.uk. C Blaxell Tel 07768 171979 (Norfolk)

LEICESTER Longwool sheep.

6 ewes, 2 x 6yrs, 3 x 6ys, 1 x 3yrs, 10 lambs as of 27.5.2019, average age 12 weeks, location Colchester, Essex, for sale due to retirement. £950 ono. R Moss Tel 07860 774729 (Essex)

180 www.farmads.co.uk July 2019

fg_class_july_19.indd 180

27/06/2019 16:44

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 62825

RC SETCHFIELD LTD Grantham 01476 560784

Staveley 01246 475315 All prices subject to VAT

JCB 536-60 PLUS 15 reg, 4911hrs,new tyres, Manitou or JCB head

JCB Teletruk TLT30D 14 reg, 4063hrs, new tyres

JCB 535-95 Super 16 reg, 3790hrs, new tyres

JCB TM320S 16 reg, 3914hrs,Q-fit carriage, new tyres

Claas Scorpion 7045 Plus 60 reg, 6999hrs, PUH, Manitou head, new tyres

JCB 531-70 Super 65 reg, 3436hrs, 145hp engine, tyres 80%

Merlo P40-7CS 64 reg, 4653hrs, air con, r/hitch, tyres 80%, Sanderson carriage

A & W 14t trailer, hyd rear door, air brakes, s/singles, grain chute

New West 14t monocoque grain trailer, s/d/bar, hyd door, grain chute, s/singles

Ranch 10t trailer complete with grain chute

POA

For more pictures and more stock visit

£5,975

POA

£12,975

POA

£2,975

www.setchfield.co.uk

Current Used Machinery For all used machinery enquiries please call Nunzio Rio on: 07970 248113

Contact Nunzio Rio on 07970 248113 CHALLENGER MT775E

CHALLENGER MT775E

£97,500 + VAT

£135,500 + VAT

2014, Approx.4900hrs, Comfort pack, 16 idler weights, 5 spool valves, Deluxe vrs leather seat, 30” ext ag tracks 60%,

2016, 2300hrs, 30” Extreme Ag Tracks @ 65%, Guidance Ready, Comfort Pack, Weights: 22 x Front, 16 x Idlers & 18 x Track Frame.

WARRANTY REMAINING

FENDT 936 PROFI PLUS

FENDT 828 PROFI PLUS

£134,500 + VAT

£95,500 + VAT

www.rwcrawford.co.uk

CLAAS 75E

FENDT 939 PROFI PLUS

£29,500 + VAT

£129,500 +VAT

£115,500 + VAT

2015, Approx 3350hrs, Front and Cab Suspension, Front Linkage, Air Brakes, Weights Not Included.

2001, 9040hrs, Tracks @ 35%, No Linkage

2015, 2682hrs, Cab Suspension, Front Axle Suspension, Guidance Ready, Vario Grip, Air Brakes, Air Suspended Seat

WARRANTY REMAINING

FENDT 724 PROFI PLUS

MASSEY FERGUSON 7726 DYNA 6

MASSEY FERGUSON 7718 DYNA VT

£73,500 + VAT

2017, Approx.1840hrs, Front and Cab Suspension, Guidance Ready, Air Brakes, Air Con, 10.4” Vario Terminal

2015, Approx 4200hrs, Front and Cab Suspension, Front Linkage, Front PTO, Air Brakes, Weights Not Included.

2014, Approx.4600hrs, 4 x Rear ESCV, Comfort Front Linkage, Cab Suspension & Front Axle Suspension.

WARRANTY WARRANTYREMAINING REMAINING

WARRANTY REMAINING

£73,500 +VAT

2016, Approx.3220hrs, Front Linkage, Air Brakes, Multipad Joystick, Air Brakes, Electric Mirrors, Topcon ISO RTK Kit, Weights not included.

WARRANTY REMAINING

Buy and sell online — www.farmads.co.uk

POA

£81,500 +VAT

2016, Approx.850hrs, Front Linkage, Front PTO, Front Spool, Climate Control, Guidance Ready.

WARRANTY REMAINING

July 2019 www.farmads.co.uk 181

fg_class_july_19.indd 181

27/06/2019 11:01

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

01223 870016

CAMBRIDGE

FARM MACHINERY

www.cambridgefarmmachinery.co.uk

RDA 400S RDA 600S

RST 830 RDA 800S

CR 650CB CR 500CB

Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Opico Rapidlift Rapidlift Rapidlift Cousins Köckerling Sumo He-Va He-Va Amazone Claydon Simba

RS 1020

RD 400F Drill 2001 RD 600F Drill System Disc or System Tine RD 800P Set of System Discs to fit RD 600F drill RDA 400S Drill 2010 RDA 400S Drill 2015 Choice RDA 600S Drill 2002 RDA 600S Drill 2004 RDA 600S Drill 2008 Refurbished RDA 600S Drill Ex Demo RDA 600S Drill 2010 RDA 600S Drill 2015 RDA 800S Drill 2002 RDA 800S Drill 2004 RDA 800S Drill 2013 c/w 3 rows Drilling Coulters RDA 800S Drill 2013 choice RDA 800S Drill 2018 RST 330 Twin Press RST 450 Twin Press RST 550 Twin Press RST 630 Twin Press Ex Demo RST 630 Twin Press RST 830 Twin Press TopDown TD300 TopDown TD400 Ex Demo TopDown TD400 TopDown TD500 TopDown TD600 TopDown TD700 NZA600 6m Cultivator Ex Demo RS1020 Roller Rear Drawbar to fit Top Down Carrier CR500 CB Carrier CR500 Carrier Tines & Crossboard to fit CR500 Carrier CR650CB Carrier CR820 Variocast Electronic RRP £7,122 our price £5,300 RL400 Cultivating Solutions RL 600 to fit a Väderstad 6m Drill Demo Unit RL 600 to fit a Väderstad 6m Drill Second Hand Sidewinder 12.3m Rolls Allrounder 6m Ex Demo Trio 3m 2012 c/w Hyd Trip Legs 8.2m rolls 24" Cambridge & Breakers c/w Crossboard Combi Disc Roller Contour RRP £43,000 Special Offer £33,250 6001-C Combination Drill 2013 6m Hybrid Drill Solo SL400

66240

RST 330 Church Road, Hauxton, Cambridge CB22 5HS

cfm.sales@cambridgefarmmachinery.co.uk

Main Dealer & Service Centre

Refurbished VÄDERSTAD Machinery Available

182 www.farmads.co.uk July 2019

fg_class_july_19.indd 182

27/06/2019 11:09

GATERIDGE Aberdeen Angus,

SAC Health Scheme, closed herd South Northants, andy@ gateridge.co.uk. A Thompson Tel 07836 246392 (Northants)

SUFFOLK shearling rams from accredited pedigree ﬂock, well grown, fully vaccinated, choice of 12. D Wolton Tel 07920 772862/01206 298844 (Suffolk)

28-66506

• Japanese • Italian • Mexican Speckled • Bob White • Tennessee Red • English White • Tuxedo Available throughout the season, aged day old to adult, table or laying strains. Day old butlers - £90 per 100 Day old Coturnix Japonica - £80 per 100 Subject to your order placement or ex stock Eggs by the hundred or 1000 trade prices

07719CM4584889 0JY

INDIAN Blue peacock chicks,

ready in approx 4wks, unsexed. £25 each; also one white chick. £30. R Hopkinson Tel 07976 424263 (Lincs)

Barry Horne 28-64400

Two 12t & three 17t Collinson Collinson 18t side discharge

07879 402246 01948 710662 KERRY Hill ﬂock being dispersed, all MV Accredited & Society registered. R Woolway Tel 07971 575532 (Cambs)

29-64410 Norfolk Mobile 07775 741720

MACHINERY

TAARUP straw chopper in

excellent condition, tractor mounted, hardly used, go straight to work. L Stones Tel 07968 090662/01757 270268 (N Yorks)

FOR SALE

LLEYN RAMS registered & unregistered shearlings, 2-shear & stock rams from MV Accredited flock, extensively reared, EBVs in top 25% & above Range of prices • choice of 30 tel Richard Evans

28-66425

WANTED & FOR SALE

FGM

01953 717258 07836 253021

email stonehouse.office@gmail.com

www.stonehousefarm.org

Fleming 9’ topper 2017..............................£1,850 Arrow 2m HD flail/ collector, 2017 ..............£4,950 Set of Parmiter discs, 8’ ..£450

Also Machinery and Implements: Spares, Wheels, Tyres, Loaders, Cabs and Hitches

ATKIN

MATBRO TR250 Powershift, joystick controls, PUH, clean tidy machine. A Simpson Tel 01738 840111 (Perth & Kinross)

Norwich Road, Dereham

FORKLIFT/ TELEHANDLER MAN CAGE

FARM MACHINERY

01362 692104/637332 www.atkin-farm-machinery.co.uk

Quantock 2m slitter/ aerator ..........................£2,360

31-65667

Norfolk paddock subsoiler 10” deep, inc mole, as new...........................£1,250 Standen FM2 front mounted potato tops, flail topper, c/w cross conveyor .......£1,500 Micron 6m tractor mounted weedwipers for sale or hire .....from £3,719 Micron & Edlington weedwiper spares in stock

All + VAT unless otherwise stated

LUCAS Raptor straw spreader,

2010, good working condition, call for more info. R Brown Tel 07814 451463/07975 504420 (Essex)

£575+VAT

Bolt-on brackets additional

01531 820545

www.euroquip.net • sales@euroquip.net

Breaking

head yoke, vet access, sliding rear door, head scoop, hoof trimming kit, a few repairs, but in good working order. £1,500 ono. A Little Tel 07803 156024 (Rutland)

RITCHIE lamb weigher, as new. £500 ono. A Parris Tel 07712 176358 (Essex)

MATERIALS HANDLERS

Good used Secondhand Tractors of most makes always for sale

PORTEQUIP cattle crush, auto

Seed drills

ELTEX LPG gas brooder

chicken shed heaters (4), the 3 pictured together are approx 5yrs old, other one was used as a spare as it's older, capacity approx 2500 birds each. £150. K Munton Tel 07815 559485 (Notts)

PEDIGREE Hereford bulls to suit most budgets - dairy, suckler & pedigree farmers, the bull pictured is for sale, TB4 area, SAC Premium Cattle Health Scheme Elite Herd health status. www.pulhamherefords. co.uk. P Vincent Tel 07771 697866 (Norfolk)

SUTON road sweeper, 2.5m

wide, new brush, PTO, 3 point linkage. £650. I Cowell Tel 07788 985544 (Essex)

G. BROWN

USED MACHINERY SALES IH 584 2wd tractor, std box, clean & tidy, starts & works OK, T reg .....£3,400 IH 584 2wd tractor, c/w Quicke 3260 loader power bucket ...................£4,500 Bomford Sabre 9’ pasture topper, vgo ............................................£1,350 Spearhead 9’ pasture topper, gwo ...........................................£1,100 SOLD Votex 12’ pasture topper c/w end tow kit ....................................£875 Quicke loaders to fit IH 674-784 tractors .................................from £750 Set of 16’ chain harrows, 4x 4’ sections c/w pole, vgo ..................£395 Set of 10 IH weights, Pt No 383392RI, c/w frame ...........£400 Front end loader to fit MF 35-135 tractors, c/w power bucket & valves ...........................................£450 29-64236 All prices plus VAT

Tel: 01945 700142 or 07774 676440

Accord • Amazone Sulky • KRM • Vicon Coulters, Metering Units, A frames Etc •KRM R306 6m air drill coulters as new

£1,200+VAT

•MF 510 8m air drill £850+VAT •Pottinger Mex 6 forager £1,500+VAT used this season std pick up •Joskin 6m dribble bar hyd folding to fit tanker 29-66523

SUFFTEX & Texel rams, excellent muscling & good skin, MV accredited & vaccinated, choose now & we will keep until you need them. C Grundy Tel 01406 330205 (Lincs) LIMOUSIN bull 2yr old by Wilodge Cerberus, very quiet, smart well ﬂeshed young bull, ready to work. C Clements Tel 07970 792367/01284 828839 (Suffolk)

admin@agrimec-ledbury.co.uk www.agrimec-ledbury.co.uk

£850+VAT

Call Craig on

07977 208205 (T)

BOMFORD C3618 drive in

power loader, piped third service, c/w pallet fork attachment & subframes (brackets), removed from Case IH 4230 4wd, also ﬁts Case IH 85 & 95 Series 4 cylinder tractors. £2,500+VAT. N Osborn Tel 07885 625416/01444 461976 (W Sussex)

Buy and sell online — www.farmads.co.uk

BULK FEEDERS FEED UK BINS

MACHINERY

KUHN Primor straw spreader, trailed, will take a big Hesston or 2 round bales, straw or silage, self loading rear door, hydraulic bale lift holds second bale off ﬂoor while ﬁrst one is spread, gwo. £4,795+VAT ono. J Brook Tel 07957 846865 (Lincs)

Your Fruit Machinery Specialists 01531 632171

29-66573

QUAILS

THREE 15' metal barriers & deep mangers, galvanised, good for feeder wagon, strongly made. £500+VAT each; also one 12' barrier & shallow manger, strongly built, galvanised. £300+VAT. V Covill Tel 01636 813240/07854 428989 (Notts)

29-66375

LIVESTOCK (cont)

Blue Bridge Group

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

VADERSTAD Carrier 650,

3yrs old with system discs & crossboard, excellent condition. £25,000 ono. S Micklethwait Tel 07790 982702 (Worcs)

ELEVATOR. £1,200+VAT. F

Hardy Tel 07957 855180 (Notts)

July 2019 www.farmads.co.uk 183

fg_class_july_19.indd 183

28/06/2019 09:43

MATERIALS HANDLERS (cont)

For all your DE ADVERTISING contact... S on 01473 694456 ER AT CLASSIFIED TRA W I K IC N or k 455 N on 01473.u6k94 SAM WILSO farmersguide.co

de.co.u

nicki@farmersgui

Farmers Guide

samantha@ JCB 536-70, 2007, 3900hrs, Q-ﬁt pallet forks included, arable farm entire life, very tidy. £27,500. H Barnes Tel 07887 943932 (Glos)

160HP Crawler

Startin Tractors Limited

880088 Startin 01827 sales@startintractors.co.uk MATBRO Teleram 40 inner boom. £250; also Matbro Teleram 3 (TR250) inner boom. £500. GW Harrold & Partners Tel 07836 751076 (Norfolk)

.co.uk

www.farmads

Caterpillar D6D

31-66353

only 4750hrs, hydraulic cone & pin, PUH, vgc, drives very well. £22,500. L Rich Tel 07774 112211 (Glos)

£24,500+VAT c/w linkage, A/C & v good tracks!

Used Weidemann T4512

JCB 526 Farm Special, 2000, 5600hrs, pallet forks included, Q-ﬁt, very tidy. £15,750. H Barnes Tel 07887 943932 (Glos)

CLAAS 7030 Varipower, 2008,

01763 780440

31-66502

rear trailer hitch & hyd, pin & cone with hyd locking, Weidemann warranty

MILL & MIX

Weidemann T4512 telescopic handler

COBO SC95/M98 seat, Canto

fabric, good condition. £350 M Rufﬂes Tel 07887 773727 (Norfolk)

telescopic handler, 2015, 40hp, 2240hrs, hydrostatic transmission, lift height 4.5m, lift capacity 1200kg, new tyres, pallet tines, serviced, vgo

compact dimensions, 4.5m lift, choice of new & used

£21,500

David Grundy 07879 698473

GRUNDY AGRICULTURAL

JCB526-55S Farm Special, 9000hrs, new tyres, Q-ﬁt headstock, used every day, any trial, vgc for year, call for more info. £11,000+VAT ono. I Bowler Tel 07957 956529/01509 263447 (Leics)

Startin Tractors Limited

880088 Startin 01827 sales@startintractors.co.uk

MANITOU MLT627 Turbo,

Agricultural spec, 2005, good condition, very good machine, only 1 owner from new, very good tyres 90%, engine runs perfect, just had a brand new battery, had the ram reconditioned, done around 6000hrs. £15,995+VAT. J Masiha Tel 07707 713345 (Essex)

Bag Lifter

KONGSKILDE hammer mill,

5.5kw single phase (motor could be replaced with 3 phase), with some piping, for pig & poultry feed. £350. J Bristow Tel 01363 772965 (Devon)

STAINLESS steel meat

trays, various sizes. From £8–£15+VAT. A Dockerill Tel 01223 835029 (Cambs)

APPROX 10 tons of feed beans for sale, can deliver locally. Spot price on the day. N Finbow Tel 07825 925580/01728 602115 (Suffolk)

MISCELLANEOUS MANITOU MLT 630, 2004,

hydraulic cone & pin, good tyres, PUH, bucket & pallet tines. £14,500. L Rich Tel 07774 112211 (Glos)

Hydramex Limited GENERAL FARM AND AGRICULTURAL SUPPLIERS OF TRACTOR & WEARING PARTS, HARDWARE, CLOTHING ETC. FOR FARMERS GUIDE READERS

UNTRY STO

31-64882

CASE 1840 Uniloader, 1999,

owned from new, approx 3000hrs, used for clearing poultry buildings, always washed down after use, maintained regardless of cost, nearly new tyres, seat & cab lowered, call for more details. £6,000+VAT. M Garwood Tel 07767 780527/01621 779507 (Essex)

31-66355

sales@oakfields-ag.com

31-66389

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Weidemann T6027 telescopic handler

CO ALL IN ONE

£640 + VAT & Del

33-63465

Tel: 01280 705202 Fax: 01280 704163

Safe lifting of seed/fertiliser bags and unloading trucks, will handle up to 4 x 600Kg bags

Email: hydramex@hotmail.com Field Farm, Charlton Road, Evenley, Brackley, Northants, NN13 5GH

01386 49155

Weidemann T4080 telescopic handler

GRAM stainless steel freezer, LED digital display & 7 strong wire shelves, height 199cm, width 69cm & depth 86cm, has wheels for easy moving. £500+VAT. A Dockerill Tel 01223 835029 (Cambs)

MUCK & SLURRY

31-66354

CONVEYOR. £500+VAT. F Hardy Tel 07957 855180 (Notts)

pin & cone headstock c/w hyd service, Weidemann warranty Startin Tractors Limited

880088 Startin 01827 sales@startintractors.co.uk

MANITOU implement bracket,

c/w bolts. £50+VAT ono. J Nott Tel 07957 146325 (Norfolk)

SAFETY ladder, good condition,

overall height 3700mm, with 12 steps. £50 no VAT. D Ivens Tel 07969 877834 (Northants)

www.farmads.co.uk

MUCK fork, 8’ wide, to ﬁt JCB, one broken tine. £400+VAT. V & R Waspe & Sons Tel 01449 612607 (Suffolk) RITCHIE galvanised muck scraper. £300+VAT. J Staight Tel 07761 631549 (Essex) KEENAN Orbital 12t muck spreader. Offers. S Parrish Tel 07785 502436/01992 572511 (Essex)

184 www.farmads.co.uk July 2019

fg_class_july_19.indd 184

28/06/2019 10:01

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 65584

KVERNELAND TAM3232MN 3.2m mower conditioner, 2015, c/w plastic conditioner ﬁngers Stk No 21049329

£7,500

VADERSTAD CR650 2014, System disc Aggresive, c/board, 470mm Tru Cut disc, unbraked, steel runner, towing eye 50mm Stk No 11051643 £27,500

LELY SPLENDIMO PC 330 2015, trailed mower conditioner c/w quick change knives Stk No 11050778 £9,000

JOHN DEERE 5115M 2018, 884hrs, p/rev 16/16 40K, 600/65R34 90%, 480/65R24 90%, 3 man SCV, loader ready Stk No 11052451 £43,000

JCB JS130LC +T4F 2018, 918hrs, long u/c, monoboom, 3m dipper, hyd quick hitch, 24”, 48” & 72” DM buckets Stk No 61053340 £65,000

A JOHN DEERE 5115M 2018, 413hrs, power reverser 16/16 40K, 600/65R34 90% - 480/65R24 90%, 3 manual SCV, loader ready Stk No 11052450 £43,000

VADERSTAD RDA600S 2004, air drill, 6m width, disc cultivation, radar metering, pre emergence, disc coulter Stk No 11039124 £22,250

POLARIS BRUTUS 2016, 432hrs, 3 cyl Yanmar diesel engine, 4wd, hydrostatic transmission, power steering Stk No 61052417 £7,500

JOHN DEERE 5115M 2018, 807hrs, power reverser 16/16 40K, 600/65R34 90% - 480/65R24 90%, 3 manual SCV, loader ready Stk No 11052448 £43,000

VADERSTAD RDA800S 2014, disc coulters, Fenix metering device, pre-em & bout markers Stk No 21048808 £65,000

JOHN DEERE 962i 2014, 6000L tank, 12 section, 36/24m boom, 380/90R46 tyres, full 900 i package Stk No 11051486 £38,000

VADERSTAD RDA800S 2009, disc coulters, radar metering, pre-emergence markers, bout markers Stk No 11052086 £35,000

Prices do not include VAT

HIRE 01728 628325 Mark Debenham 07710 148420

MAULDEN 01525 405848 Gary Buckle 07712 556387

CROMER 01438 861257 Robert Vigus 07712 556389

GROUNDCARE 01206 230283 James Tuckwell 07932 107618

SUDBURY 01787 374100 Paul Coffey 07766 225174

Buy and sell online — www.farmads.co.uk

JOHN DEERE 6150R 2014, 2821hrs Direct Drive 40kph, 600/60R28, 710/60R38, cab & front susp, autotrac ready Stk No 11048238 £62,000

VADERSTAD RDA400 2001, disc coulters, cultivation discs, mechanical metering, bout markers Stk No 11051826 £14,000

www.tuckwell.co.uk

RAYLEIGH 01268 783311 Tim Thornton 07557 922965

DUNMOW 01371 875751 Tom Pine 07741 628089

WORLINGWORTH 01728 628325 Tom Mason 07957 844986

ARDLEIGH 01206 230283 Mark Debenham 07710 148420

July 2019 www.farmads.co.uk 185

fg_class_july_19.indd 185

27/06/2019 11:10

MUCK & SLURRY (cont)

35-64254

BEST PRICES GRAIN FUMIGATION GRAIN STORE TREATMENTS full coverage GRAIN MONITORING and RODENT CONTROL

VOGEL & Noot Euromat

M920 4f, straight & good condition. £1,200. D Pike Tel 07789 927662 (Norfolk)

Call

COMMAND PEST CONTROL

01787 248049

www.commandpestcontrol.co.uk

PLOUGHS

tanker, 2017, only ever been used once, as new condition, upgraded to 13500L/min, air & hydraulic brakes, Centivac 360deg slurry gun system, inverted rear spreader plates, mud ﬂaps & spotlights. £22,000+VAT. M Fisher Tel 07976 622090 (Norfolk)

DOWDESWELL 4 furrow reversible DP8A plough, good straight plough, good metal, ready for work, surplus to requirements. £950. J Mayes Tel 07769 675104 (Essex)

trailed, on single axle super single new tyres, new 7" pipes & star sludgigator ﬁtted for side rain gun spread, used for water recently. £3,500+VAT. R Lane Tel 07831 615912 (Cambs)

KTWO duo spreaders (2), 12t capacity, on large 710 tyres, slurry door, good wearing metal, 2008–2005, excellent condition. POA. R Mansﬁeld Tel 07801 864112 (Bucks)

PEST CONTROL

KUHN Manager 6f wagon plough, straight & tidy, auto reset, good wearing metal. £5,000. G Blandford Tel 07973 424473 (Hereford)

bike. £100+VAT. R Brown Tel 07802 397258 (Bucks)

UK agents for Pro-Pak weighing equipment, Oldenhuis & Prinsen & Symach palletisers

hydraulic ﬁttings, to ﬁt LB plough. £50+VAT ono. J Nott Tel 07957 146325 (Norfolk)

DOWDESWELL 5 furrow DP7D2. £400. N Cobbold Tel 07776 210237/01473 823167 (Suffolk)

UR CHECK OUT OTE NEW WEBSI

reversible, includes press arm, trash boards & skimmers, excellent metal, 5th furrow also available. £950. R Eyre Tel 07760 102929 (Norfolk) RABE Eagle 140, slatted 5 furrow (4+1), 90% new metal, good straight condition. J Spink Tel 07889 415028 (Suffolk) DOWDESWELL 4 furrow DP7. £250. N Cobbold Tel 07776 210237/01473 823167 (Suffolk)

sales@davidharrisons.com www.davidharrisons.com

01353 740666

MASCHIO Ploughs

The MASCHIO plough range is now available from Writtle Farm Machinery. Please call for more information or to arrange a demo. www.writtlefarmmachinery.co.uk

DOWDESWELL furrow press, 80" wide, 50% rings. £600. D Pike Tel 07789 927662 (Norfolk)

STANDEN/PEARSON T2 potato

VOGEL & Noot M950 4 furrow

plough. £1,200. T Ashton Tel 07508 238635 (Norfolk)

07748 004794 01245 442224(T)

DOWDESWELL plough DP7D2,

STOCKS slug pelleter to ﬁt quad

KVERNELAND 5+1f, 2014, No28 mouldboards, skimmers, rear discs, good metal, no welding, very good straight plough. £10,500+VAT. H Saunders Tel 07748 140502 (Beds)

• Tong Midi EasyFill 2017 machine full spec machine, exdemonstration • Swift Lift Euro 200X Elevator 600mm x 19m c/w thrower • Downs centre pivot box tipper 3 phase • New Oldenhuis & Prinsen Palletiser • Miedema 106/70 Telescopic Elevator • Morray 425 Bagger/Weigher • 3M V-Track Conveyor c/w stitcher and automater • Herbert Dry Brusher 900mm wide with picking table • Tong No20 Bulk Hopper with high sides • New Tong Midi Box Fillers with doorstop belt and variable speed available from stock. • Morray 550 Electronic Weigher c/w stc stitcher system ex stock

DOWDESWELL 4 furrow

KV press arm bracket with

STAR 10000L vacuum tanker,

USED & REBUILT

KVERNELAND LO85/300 6 furrow on land/in furrow, high clearance, 28 boards, hydraulic press arm, Variwidth, hydraulic depth wheel, cutting disc, c/w pallet of spares. £10,500+VAT ono. L Sutton Tel 07970 658813 (Warks)

DOWDESWELL furrow press, suit 6 furrow plough, stored inside. £800 ono. W Beers Tel 01604 781494/07712 435168 (Northants)

ABBEY 3000 gallon slurry

POTATO EQUIPMENT

37-66098

twin outlet, hydraulic folding boom, 360 Swizel Storz connection, on trailing swivel bar, twin detachable splash plates, independent side shut off, ﬂow meter not working, gc. £845+VAT ono. J Brook Tel 07957 846865 (Lincs)

DEPTH wheel, ﬁts Overum 5–6 furrow ploughs, as new. £350 ono. P Buckenham Tel 07770 797846 (Essex)

3+1 furrow + Claydon Furrow Cracker. £1,500. J Suckling Tel 01440 730367/07771 970820 (Suffolk)

harvester, 2009, with picking table, double multi-sep, wheel drive, low acreage, very good condition. £28,500+VAT ono. S Oliver Tel 07979 705250/01790 752584 (Lincs)

Kverneland Underhaug 2600 potato harvester

KVERNELAND LB85 4 furrow reversible with hydraulic variwidth, knock on new points, all new No28 mouldboards, etc, ready to plough. £4,750+VAT. R Lane Tel 07831 615912 (Cambs)

FISKARS match plough body with 2 points. £600. D Grifﬁths Tel 01437 751212 (Pembrokeshire)

OVERUM Xcelsior DX 5 furrow, all new metal, variable width, good condition. £4,500. B Clarke Tel 07799 881727/01953 857406 (Norfolk)

£5,000 ono+VAT

ready to work, used 2018 trouble free, 1998/1999, owned from almost new, averaged 40 acres/yr, main & second web, Dahlman & haulm rollers all gc, spare parts available, good genuine machine well maintained

37-66434

SLURRYKAT umbilical spreader,

36-66477

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

for

RABE Eagle 140C 4+1 furrow reversible plough & press, slatted mouldboards, hydraulic release arm, 1995, no cracks or welds, some spares, good condition. £1,950+VAT. R Maundrell Tel 07785 568800 (Warks)

james@jfhudson.co.uk

07803 765440

186 www.farmads.co.uk July 2019

fg_class_july_19.indd 186

28/06/2019 10:38

fg_class_july_19.indd 187

28/06/2019 10:24

And this one...

Farmers Guide

www.FarmAds.co.uk

And so did this one.

This little piggy went to market.

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

£12,800

£10,600

£12,800

£26,800

£6,800

£7,800

£12,800

£5,800

£4,800

£10,800

£6,800

£12,800

£8,800

£5,800

£14,400

ASK ABOUT OUR PAY AS YOU FARM PLANS CALL 01386

49155 OR VISIT WEAVINGMACHINERY.NET

188 www.farmads.co.uk July 2019

fg_class_july_19.indd 188

27/06/2019 11:10

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 TRIMBLE TDL450L radio/repeater, new. £900. S Bartle Tel 07884 238552 (Notts)

POTATO EQUIPMENT (cont)

STANDEN Vision potato

harvester, wheel drive, 45mm web, 2001, in good condition, lifted 120 acres last year. J Wilson Tel 07710 427348 (N Yorks)

TONG receiving hopper,

£1,500+VAT. F Hardy Tel 07957 855180 (Notts)

PACEPACKER F1 palletiser,

USED MACHINERY Walthambury 720M Weigher good clean condition

Manter 25/6 Weigher

HERBERT 2400 Spira-clean, 8' hopper, 8 adjustable steel spiral rollers (gap & speed), dipping cross belt, continental waste conveyor (removable) + waste belt, canopy & lights, very good condition. £20,000. M Latta Tel 07970 699693/01487 842036 (Cambs)

Herbert 8ft Receiving Hopper with coils, evolution & grading module as an option as is or rebuilt

Evolution Cleaner and screen module 8ft, inc all hydraulic pumps, screens & waste belts Manter SAB Sewing System

REDUCE HARVESTING DAMAGE WITH RUBBER WEB COVERS QUICKSPLICE WEB JOINERS RUBBER GRADING SCREENS PERFORATED RUBBER WASHER BELTS

TITAN Palletising System

Tel: 028 9127 5913 Email: info@agri-web.co.uk

REEKIE front bed tiller, with spike rotor, vgc. R Moore Tel 07799 767170 (Norfolk) GRIMME GZ DL1 potato

BAG STITCHER SYSTEMS WEIGHING & PALLETISING EQUIPMENT GRADING & HANDLING EQUIPMENT PLC PROGRAMMING SERVICE & REPAIRS

01354 638222

info@agrimech.co.uk www.agrimech.co.uk

STANDEN Pearson Gen2 declodder, 2011, excellent condition all round. R Moore Tel 07799 767170 (Norfolk)

STANDEN 2 row haulm topper,

with side delivery conveyor, blades proﬁled to ridges, depth wheels, gc. £995+VAT ono. J Brook Tel 07957 846865 (Lincs)

TOPCON X30 screen, 2 available. £2,500 each; Topcon AGI 3 RTK receiver, 2 available. £2,500; Topcon base station. £4,500; Topcon RTK clip in radio. £950. M Latta Tel 07970 699693 (Cambs)

GRIMME GT170M potato

harvester, 2006, vgc, double multi-sep, wheel drive, windrower, picking off table also available. £24,500 ono. G Blandford Tel 07973 424473 (Hereford)

BOX rotator 360 degree,

Matbro brackets, as new. A Simpson Tel 01738 840111 (Perth & Kinross) CRAMER potato planter, old but still good for small plots. £200 ono. G Charity Tel 07889 316853/01778 346224 (Lincs)

PLEASE

THOMPSON two by 1t box

transporter, little used, stored inside. A Simpson Tel 01738 840111 (Perth & Kinross)

MENTIO

DE ERS GUI

FARM LYING HEN REP

W NTS RTISEME TO ADVE

We bring the personal touch back into farm finance. For the personal touch ring Dean Pollen on 07902 645650 or apply on line at www.abfltd.co.uk

REPAIRS, SERVICING & MAINTENANCE

PRECISION FARMING

harvester, gwo, wheel drive, dolman rollers, windrow kit. £1,950 ono. W Varnam Tel 07871 432440/07975 855514 (Warks)

TONG/PEAL 2509 tank weigher, with weigh cells, digital display & control, excellent condition. £3,000+VAT. S Oliver Tel 07979 705250/01790 752584 (Lincs)

harvester with powered wheel & diablos, 45mm main web, lifted 120 acres/yr, in good condition. J Wilson Tel 07710 427348 (N Yorks)

37-62363

STANDEN Powavator 150/70, 2008, on speed blades, with Jumbo ridger, excellent all round machine. R Moore Tel 07799 767170 (Norfolk)

STANDEN Vision potato

Equipment • Livestock • Feed Fertiliser • Seed • Cash Flow Diversification Projects Building • Debt Consolidation

AGRICULTURAL MACHINERY MAINTENANCE ENGINEER

42-66507

www.machinerywanted.co.uk

00-66518

Herbert 4ft Grader Hopper stars & sizer, picking belt, as is or rebuilt

City & Guilds of London Institute Certificates of Competance 25 years experience with Eastern Block machinery Skandinavian agricultural/ forestry products and West German engineering based machinery Competitive labour rates subject to customer acceptance of company working policy

07824 600667 Chelmsford

SEED

PG GRASS SEEDS (Sinclair McGill)

EZ Steer system to ﬁt EZ Guide

500 motor that clamps to the steering column, control unit & cables only, not the whole system, good condition, had little use, just not needed anymore. £1,000+VAT. E Coles Tel 07773 335534 (Cornwall)

Agricultural, equestrian, landscaping and sports grass seed mixtures Game cover seeds Drilling service available

44-65969

Call Lukasz on

07512 821421 or visit our website

PROFESSIONAL SERVICES

Buy and sell online — www.farmads.co.uk

• Screen & lift roller graders • Hopper cleaners, brushes, elevators, tank weighers, box & big bag ﬁllers/tippers, etc • Onion toppers & windrowers • Vegetable transplanters, drills, top lifters, toppers, etc • Grimme DL1500 harvesters • Hook tine cultivators

JOHN Deere Universal Steering Kit 200, c/w ﬁttings, harness, etc. £500+VAT ono. J Nott Tel 07957 146325 (Norfolk)

Blue Bridge Engineering Ltd

By Teo Marian Teodorczyk

high output, precise stacking, reliable machine. £23,000+VAT ono. S Oliver Tel 07979 705250/01790 752584 (Lincs)

37-63414

37-63518

WANTED FOR EXPORT

GRIMME Allrounder 2 row bagger potato harvester, c/w 3 way airbagger/weigher, stored dry, vgc. K Hodgson Tel 07721 562849/01507 568329 (Lincs) STANDEN Pearson Jumbo ridger with hydraulic markers & subsoiler legs, vgc. R Moore Tel 07799 767170 (Norfolk) APPROXIMATELY 60t of chitting trays. T Few Tel 07821 445336/07768 827729 (Cambs)

Tel: 01832 710814 Mobile: 07802 620138

July 2019 www.farmads.co.uk 189

fg_class_july_19.indd 189

28/06/2019 10:47

Email julian@midlandsagriplant.com Office 01530

Mobile 07831

229686 113316 www.suffagri.co.uk We are now members of the National Testing Scheme and can test your sprayers and granular applicators

BAC 6.3cu/m high tip bucket 2012, new cutting edge, JCB/ Volvo backplate

Agriweld 2000kg front linkage weight block 2014, with toolboxes

Case Maxxum 110 2010, 7410hrs, tyres 60%, very tidy tractor

Black Stocks dual wheels Trelleborg 710/75x42 85%, 6 clamps per wheel

Cousins 6.4m vertical folding rolls 2010, plain 30” rings, steering drawbar

Cousins 12.4m horizontal fold rolls 2014, 24” rings with breakers, as new condition

Krone R320CV front and rear mowers, in good condition ................................................................................ the pair £15,000 Amazone ZA-V3200 Profis Tronic fertiliser spreader, 2017..... £8,730 Amazone XS 5-950 variwidth Cayros, 260hp headstock..............POA Amazone ZA-M1500 fertiliser spreader ........................................ £1,950 KRM D2 Trend fertiliser spreader...................................................... £1,500

NEW! We are now full McCormick Dealers Full range of Tractors in stock • BOOK A DEMO

Hi-Spec 3000 gallon vacuum tanker 2015, Trelleborg flotation wheels, had little use

JCB 435S Agri loading shovel 2015, 1830hrs, 750/65x26 tyres 75%, excellent condition

Main Amazone dealers for Suffolk

We are main dealers for Suffolk

sprayers, spreaders, drills & cultivation 63870

Great Plains SLD 420 cultivator 2013, 90% metal, rape seeder, demo condition

Genuine JCB Service and Parts available Pakenham, Bury St Edmunds, Suffolk IP31 2JS

01359 232155 • After Hours: 07768 007528 • E-mail: office@suffagri.co.uk

Keeble cultivator tines, subsoiler & press, very heavy duty, 95% metal

Krone 1400 Plus 4 rotor rowing up rake 2014, excellent condition

J. T. FRISKNEY LTD

Kuhn GA 8731 2 rotor rowing up rake 2014, working width up to 8.6m, low acreage

17-29 West Street, Horncastle, Lincs LN9 5JE

www.friskneys.co.uk HI-SPEC Dealer for Lincolnshire

Tel: 01507 523233 Mob: 07715 324301 63740

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Finance & Part Ex Available

MANITOU Dealers for Mid Lincs Kuhn HR 4004 power harrow 2008, Maxipacker, 90% tines, excellent condition

Bailey 12t Contract dump trailer 2013, air/hyd brakes, spr d/ bar, 445/65x22.5 wheels

Weaving 5m Shortdisc cultivator 2017, 2 rows of 22” discs & press, 300 acres only

AS Marston 14t Ace grain trailer 2009, hyd tailgate, spr d/bar, 550/60x22.5 flotation tyres

Western Abbi fast tow diesel bowser 2017, 2000L, 12v pump & flow meter

Mobile bunded site bowser 7670L, diesel engine pump, 50mm discharge nozzle

West 3000 gallon dual spreader 2012, 650/65x30.5 wheels, excellent condition

Dragone grass topper Stocks Black dual wheels 2016, 3m, suitable for front or for combine rear linkage, 650/65x38 to fit 800/65x32 on 1st class condition combine

WANTED

See website for more pictures & more stock

66449

High Quality Combines, Self Propelled Forage Harvesters, Ag Loading Shovels, Machinery & Plant

Deutz 6165.4 RC-Shift c/w 4yr warranty & 0% finance........................... Deutz 7250 TTV (2014) 2300hrs very good condition, front/linkage Rich spec............................................................................................ Manitou MLT 634 TLSU 120PS (2012) very good condition, flow control ......................................................................................... Manitou 8’ wide powergrab ................................................................... Manitou used 7’6” manure fork, good condition ..................................... Manitou carriage c/w pallet tines ............................................................ JCB carriage for Manitou c/w pallet tines ................................................ JCB pallet tines 40 & 50mm bore ........................................................... Teagle 5050 bale chopper ...................................................................... A400 disc drill p/h mount, following harrow, very good condition new discs ........................................................................................... Vogel & Noot 2 furrow match plough excellent condition ........................ Stocks 16.9x28 dual rims ...................................................................... New Dromone PUH for 5 Series Deutz ................................................... 2007 Ford Transit van (100T 350) good condition ................................. Honda TRX 420 FE1 (2012) very good condition low hrs ....................... Mountfield 4125M c/w new 95cm Multiclip deck ................................... Used 5000L mains bunded fuel tank c/w auto nozzle, flowmeter, Watchman...........................................................................................

£69,995 £61,500 £34,000 £2,100 £400 £1,000 £1,000 POA £1,250 £5,450 £2,750 £150 £1,000 POA £3,250 £1,400 £1,500

Datatag Security ﬁtting service available All prices ex Horncastle plus VAT at current rate

www.midlandsagriplant.com 190 www.farmads.co.uk July 2019

fg_class_july_19.indd 190

27/06/2019 11:12

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

IRELAND’S FARM MACHINERY LTD

BOSTON • LINCOLNSHIRE NEW, USED & HIRE MACHINERY Carrington (Head Office) 01205 480460 Sutterton

01205 460600

Market Rasen 01673 842222

1609

www.irelandsfarmmachinery.co.uk

2601

KUBOTA M7171 PREMIUM TRACTOR EX HIRE c/w 170HP, remaining warranty approx: 2 years/1260hrs £54,500 + VAT

10734

KUBOTA M125GX III C/W QUICKE X46 LOADER c/w 133HP engine, remaining warranty approx: 4 years/1840hrs £49,500+VAT

10624

BAILEY 12T MONO TRAILER (1993) c/w sprung drawbar, rocking beam axle, hydraulic door, grain chute, road lights (JI)

9972

12T BAILEY AGRI DUMP TRAILER BAILEY 14T ROOT TRAILER (2002) (1991) c/w hydraulic brakes, rocking beam c/w rocking beam axle, std draw bar, axles, sprung drawbar, rollover sheet road lights, hydraulic brakes (BF) (BF)

9987

10216

BAILEY 18T BEETEAPER TRAILER EX HIRE (2017) commercial axles, sprung drawbar, hyd. door, grain chute, rollover sheet (SG))

SPECIAL OFFER

9426

VADERSTAD RAPID 800S 8M DRILL (2010) sharmuller ring hitch type, 2 rows of discs, levelling boards. £30,000+VAT (JI)

BAILEY 11T MONO TRAILER 1995 c/w 11 tonne capacity, roll over sheet, front window, manual tipping door, grain chute with handle, hyd. brakes (TM)

10000

BAILEY 14T ROOT TRAILER EX HIRE (2016) c/w commercial axles, sprung drawbar, hyd. door, grain chute, arched full front window (SG)

SPECIAL OFFER

8591

10681

T&F 12T TRAILER (1985) C/w Hydraulic brakes, Road lights, Hydraulic tip, Manual tipping tail door, 6 stud axles (BF)

9726

KVERNELAND ACCORD 4M TS TINE DRILL (2002) c/w 4m working width, depth wheels, side markers, following harrow £6,750+VAT (BF)

HORSCH PRONTO 6 DC DRILL (2011) Cultivation and Turbo Coulter Discs 80-90% Good, Grain Only £34,950+VAT (BF)

604

10125

NRH 12.3 M HYDRAULIC FOLDING ROLLS Cambridge rolls and breaker rings available. £22,500+VAT (JP)

PELICAN PLANTER C/w 5 Planting Modules, Markers, Pipe Work For Liquid Fert (BF)

SPECIAL OFFER

629

9034

10574

EX DEMO KUBOTA BV5160 BALER

SWIFTLIFT 900 EXTENDO c/w 2.2m pick up, Large intake ELEVATOR (EX SHOW) chamber, 14 knife blades in throat, c/w 3 phase electrics, variable speed, drop floor £25,500+VAT (PS) auto slewing platform, circular hopper, drawbar (JI)

10544

9056

KVERNELAND TAARUP 4236CT TRAILED MOWER c/w link arm mounting, 3.6m cutting width, 9 discs with 2 blades per disc, £7,000+VAT (JI)

MCCONNEL MAGNUM ELITE c/w 3 point linkage mounting, hydraulic offset, rear roller, hammer flails, front metal flaps, 540 PTO, 2.7m cut (JI)

8838

8538

8487

KVERNELAND FHP 200 MOWER

C/w new belts, new PTO, 26 hammer blades, self cleaning rear roller (JI)

2.8M REAR MOUNT MOWER c/w hammer Flails 20% Good, rear roller, hydraulic offset (BF)

Ben Ford (BF): 07469 853763 Paul Stubbs (PS): 07825 914111

KUBOTA TE6060 TEDDER c/w 3 Point linkage mounting, 6.05m working width, Oscilation dampers, hyd. folding (JP)

BIG CUTTER 2.8M FRONT AND REAR FLAIL hyd. offset, rear roller, shear bolt, PTO, heavy duty mower (JI)

10573

10648

KUBOTA DMC 6032N MOWER CONDITIONER

3.2 Metre working width, 3 Point linkage mounting, Break back system, Vertical transport (JP)

1414 EX HIRE SMi 200 BIG CUTTER FLAIL MOWER c/w Hammer flails, Righthand offset, wide angle PTO both ends, shear bolt protection (JI)

BIG CUTTER 2.8M FRONT AND REAR FLAIL (EX HIRE) c/w hydraulic side shift, large rear roller, new flails (SG)

8211

2119

SMI 260 FLAIL MOWER c/w 3 point linkage, hyd. offset, 50 degree bank cut, 90 degree upright cut, wide angle PTO (JP)

SPEARHEAD MULTI CUT 460 (EX HIRE) c/w hyd folding, hyd depth control, 6 blades per rotor £12,950+VAT

Tom Mack (TM): 07387 023444

C/w 3 meter working width, hydraulic offset, front metal protection flaps, rear roller (TM)

2050

Stuart Gosling (SG): 07824 317357

KUHN VKM 305 REAR MOUNTED FLAIL MOWER (2009)

Buy and sell online — www.farmads.co.uk

10346

JCB 531-70 AGRI SUPER c/w 145hp, 460/70r24 50%, 6 speed 40kph powershift, 3890hrs approx, Q fit carriage, hyd locking pin, reversing fan, data tag (SG)

10658 VOLKSWAGEN GOLF GT 2.0 TDI BLUEMOTION (2016) 72,554 miles, 6 speed manual gearbox, £11,995 (JI)

Josh Pennell (JP): 07469 850502 Jonathan Ireland (JI): 07778 372606

July 2019 www.farmads.co.uk 191

fg_class_july_19.indd 191

27/06/2019 11:13

2019 800E Silent Power 48v

DGM 907 micro loaders

HZM 908 – new model

812 articulated loader

loaders lifts 800 kg one year’s parts warranty excellent build quality £12,995+VAT

700kg lift genuine Perkins 2 year parts warranty c/w bucket, pallet forks £12,950+VAT

800kg lift 4 cylinder diesel pivot steer loader one year’s parts warranty £11,495+VAT

ﬁrst in the country new style 1.2t lift quick hitch diesel cabin heater £14,995+VAT

HZM 2.5t 825 loader

2019 T580 Yunnei

Self loading 4t cabbed dumpers

DGM 916 articulated loader

new style full vision cab quick hitch 16/70×20 tyre diesel cab heater £19,950+VAT

4102 engine, max 28kph max load 1500kg on highest position £24,995+VAT

ﬁrst in the country, with swivel skip absolute bargain £11,950+VAT

1.6t with quick hitch 2m reversible edge bucket, 2 year parts warranty £17,995

2019 h/d 3t triple mast forklifts

Yanmar engines full spec

Self loading 4t cabbed dumpers

Rhino 800kg micro diggers

ﬁrst in the country, with swivel skip absolute bargain £11,950+VAT

piped for hammer c/w quick hitch log grab 300mm digging & 600 levelling £5,500+VAT

250cc Jinyi Extreme off road

2019 VSM 40’ ﬂat trailers

NORTH NORFOLK Tel: 01263 861197 Mobile: 07810 561230 Email: ivan@nnvs.co.uk

Sole UK importer of Heracles Construction Equipment and Loaders brand new container spec with side shift £10,995+VAT

Utility carts/quads 200cc

supplied with 3 buckets, 1 year’s parts warranty

£14,995+VAT

Children’s 110cc tractors

www.facebook.com/NNVSUK

Marriot Way Industrial Estate, Melton Constable, Norfolk NR224 2BT 65133

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

VEHICLE SOLUTIONS

www.nnvs.co.uk

can be road legal, rain cover/screen

£2,495

tyres@farol.co.uk

HUGE RANGE

IN STOCK AT GREAT PRICES

CALL US TODAY Thame, Oxfordshire

01844 277699

Hungerford, Berkshire

01488 649150

delivered unassembled

brand new steel susp steel ﬂoor single cylinder water cooled all £950 INC VAT round 4 forward & reverse g/box twist locks twin 1200 tyres drum fully assembled & palletised del brakes h/d springs £10,495+VAT INC VAT £1,150 INC VAT £2,250 DELIVERY CAN BE ARRANGED

Telehandler Tyres

Visit www.farol.co.uk for more stock

Duraforce Utility 460/70R24

R8000 Utility 460/70R24

£385

each Ex. VAT

XMCL 460/70R24

£525

each Ex. VAT

Hinckley, Leicestershire

01455 638970

£430

each Ex. VAT

Bibload 460/70R24

£575

each Ex. VAT

Midhurst, West Sussex

01730 819989

192 www.farmads.co.uk July 2019

fg_class_july_19.indd 192

27/06/2019 16:24

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

Grain & Precision Drills Balers & Wrappers Sprayers & Fertiliser Spreaders

FLAILS DIRECT .CO.UK

QUALITY FLAILS

GM-R 4000 24m ex 2018 show model full GPS & section control

Tel: 01427 718561 Fax: 01427 718016

Diet Feeder Weighing Systems

David King Electronics

Tel: 01789 731365

MASCHIO ribbed rubber roller/ packer, 4m, c/w scrapers. Open to offers. S Bartle Tel 07884 238552 (Notts)

46-66096

www.dkelectronics.co.uk

Also flail mowers for tractors and excavators from 15 to 200HP (Flails direct is a division of Engineering and Hire Ltd)

McConnel (Kellands) Multidrive 6195 with Bredal K85 spreader 2012 two sets wheels

Graham Mitchell-Rowlands 07860 618903 01449 737482 graham@gm-rsprayers.co.uk Marek Technical Support: 07496 294201 Sue Admin: 01449 736300

Tel: 01379 588286

Househam Chafer 3000 24m 1995 two sets wheels good all round .................... £9,000 to clear ck today Order your new Knapsa 12, 16 & 20L models

on farm or at our test centre, all makes

More sprayers on our website:

www.gm-rsprayers.co.uk

SUMO leg protectors (31). £5/ each; also Sumo point wings. Open to offers. S Bartle Tel 07884 238552 (Notts)

HYDRAULIC ram, in very good condition, 2140 hole centres, 40mm pin holes. £75 no VAT. D Ivens Tel 07969 877834 (Northants)

SIMBA Prolift standard points (3), heavy duty points (6), shins (9). Open to offers. S Bartle Tel 07884 238552 (Notts) STOCKS Wizard seeder ground seed radar, new. £300. S Bartle Tel 07884 238552 (Notts) HARDI sprayer mudguard, came off Commander 2800. Open to offers. S Bartle Tel 07884 238552 (Notts)

Holly Bush Farm, Buxhall, Stowmarket, Suffolk IP14 3DP For your new self-propelled, trailed or mounted crop sprayer, to go

www.gm-rsprayers.co.uk

ﬁts 20 & 30 Series, Part No L200787, supplied with ﬁxings & instructions. £200+VAT ono. J Nott Tel 07957 146325 (Norfolk)

HYDRAULIC drop arm for IH895/4230. £130. D Grifﬁths Tel 01437 751212 (Pembrokeshire)

SMALL collection of Villiers Mk10 engines, one ﬁtted with Simplite Mk4 sludge pump, one ﬁtted with 2" dia cent water pump and one with reduction gearbox & sprocket. £150 the lot. G Richmond Tel 01502 730387 (Suffolk)

For all your CLASSIFIED TRADE ADVERTISING contact...

HYDRAULIC HOSE ASSEMBLIES MADE WHILE YOU WAIT AGRIKEL CROP SPRAYERS

01953 450279 info@agrikel.com Norfolk

www.agrikel.com

Berthoud trailed 2000L, 12m, hydraulic booms, electric controls, vgc ........................................POA Contact Richard Dix

07770 331587

BOSTON 01205 722 240 WISBECH 01945 461 181 BEDFORD 01525 841 923

www.bostoncropsprayersltd.co.uk

BATEMAN Hi Lo, 1991, 24m, 8740hrs on 14/06/19, 2000L, single line, RDS Delta 34, 2 sets of wheels, good condition for age. £9,000 ono R Wright Tel 07730 309730 (Suffolk)

SPRAYTEC LTD

Email: sales@landquip.co.uk

Sprayer Specialist in the Eastern & Southern Counties New and used sprayers and parts stocked for: Berthoud • Househam Chafer • Agrifac and most other makes

Hypro • Teejet • Lechler Altek • RDS • Dual Pumps Enduramaxx • Stocks Fan Jet

KNIGHT mounted Laser sprayer, 1999, 24m, boom recirculation, tested Oct 2018, 4 section shut off, manual spraying only, no auto pressure/speed. £4,800+VAT. E Pridgeon & Son Tel 07775 515368/01507 450241 (Lincs)

GEM 800 slimline sprayer, 12 or 15m boom. £650+VAT. I Roberts (A Roberts & Sons) Tel 07803 922216 (Rutland) HARDI 600L sprayer, 12m, manual fold & height adjustment, working order. £295+VAT. J Turner Tel 07801 419504/01494 862348 (Bucks)

SAM WILSON

NICKI WATERS

01473 694455 or

01473 694456

samantha@farmersguide.co.uk

Hardi Commander 3200L 24m HPZ Force Boom, 2010, vgc ..........................£12,500+VAT

Sprayer Specialists in the Eastern & Southern Counties Crop & Amenity Sprayer Specialist

SPRAYER TESTING on site to National Standards

USED STOCK

Berthoud Tenor 5500L 40m DP Tronic, vgc, 2009, boom could be resized if required ...£22,500+VAT

www.landquip.co.uk

LELY Autolite self propelled sprayer, 20m, gc. £1,000+VAT. G Kemp & Partners Tel 01379 783608 (Suffolk)

BOOK YOUR TEST N JOHN Deere offside rear fender,

TEAMHYPROTEEJETRDS ENDURAMAXXDUAL PUMPS K RAYERS IN STOC NEW & USED SP

**Ex-Demo Trailed** Available Aug '19 InTrac 6000/36 Electrac 3000/24 Spraymarc 2500/24 Used Sprayers LQ Self Propelled 2500/24m c/w 2 sets wheels Hardi Mounted 1200/24 Used Trailed LQ Gladiator 5500/36 LQ Electrac 3500/28 LQ Electrac 3500/24 LQ Spraymarc 3500/24 J/D 732 3200/24m NSTS Testing Agroco Fertiliser Nozzles

Gem 1000L 20m Diamond 1996 NSTS

47-66385

46-66369

www.timik.co.uk 01489 896 626

twin line, 2200L tank, with 200L clean water, ﬂow meter 5 section, 7600hrs, available August. £10,000. J Makey Tel 07989 585723 (Rutland)

Crop Sprayers

GM-R Fieldcruiser FR-30-180i 3000L 24m two sets wheels GPS auto

All offered subject to remaining unsold

Perkins & Ford engines, new/reman, Dyno tested, engine blocks & parts available New JCB 444 engine stock

SPRAYER & SLUG APPLICATOR NSTS TESTING AT OUR LOCATIONS OR ON SITE FULL ON FARM SERVICE & REPAIR Main Agents for

HOUSEHAM Sprint 1996, 24m,

Landquip

McConnel (Kellands) Multidrive 6195 4000L 24m

NSTS SPRAYER SLUG PELLET & GRANULAR APPLICATOR TESTING

ENGINES & SPARES

Agricultural Application Machinery Specialists

nicki@farmersguide.co.uk

SPRAYER, SLUG PELLET AND GRANULAR APPLICATOR TESTING

Buy and sell online — www.farmads.co.uk

E-mail: sales@flailsdirect.co.uk Website: www.flailsdirect.co.uk

incorporating

VASSGRO S P R A Y E R S

Com

2016 Agribuggy A280 2200hrs fully serviced tank 2700L 12/24m aluminium boom Teejet Field-Pilot auto steer with 9 section GPS auto section control 9.5x44 rowcrops 560/60R22.5 flotation wheels

To suit most flail mowers and hedge cutters at competitive prices

Mowers & Foragers

The Specialist Sprayer

47-63548

Material Handler Joysticks & SLI's

46-63475

Tractor & Combine Controls

TX36 combine bean kit for augers. K Stone Tel 07471 902001/01953 498148 (Norfolk)

GM-R SprayerspanLtdy

47-64441

ELECTRONIC CONTROLS REPAIRED

Boston Crop Sprayers Ltd

SPRAYERS

47-66516

SALES, parts & service for Bonhill/Fortschritt muck spreaders, combines, etc. Contact Ian Leech, BonhillLeech, 07860 206348 (Norfolk)

47-65674

SPARE PARTS

Contacts: Robert Webb: 07860 801322 Anthony Williams: 07711 947189 Phil Ramsey: 07934 799628 Andy Gemmill: 07802 336880

01279 812727 spraytecltd@btinternet.com

www.spraytecltd.co.uk BATEMAN RB26, 36m, Avadex applicator, c/w 2 Horstine Twin Air applicators, will do any width up to 36m, vgc. R Wright Tel 07768 954466 (Lincs) RAU 12m sprayer, no test. R Dunham Tel 07831 350871 (Beds)

uide

G Farmers

.uk

mads.co

www.far

July 2019 www.farmads.co.uk 193

fg_class_july_19.indd 193

28/06/2019 10:59

SANDS self propelled sprayer, breaking for spares, most parts available including good DB skid unit. Phone for details. B Poulson Tel 07850 594925/01284 828371 (Suffolk)

AGRI SPRAY

Horstine TMA4 12m 48-66560

SPRAYERS (cont)

AGRICULTURAL SPRAYERS SALES SERVICE SPARES

47-62341

01284 724455

2001 Bateman RB25, VG

CHAFER Mirage, 2500L, 24m self propelled sprayer, 4wd, 4ws, hydrostatic drive, triple nozzles, 3 sets of wheels, rowcrop 270/95-36, intermediate 380/85-30, ďŹ&#x201A;otation wheels 700/5026.5, 6900hrs, 10mth NSTS. ÂŁ10,950 ono. J Wagstaff Tel 07714 960604 (W Yorks)

TEAM sprayer, 12m, hydraulic folding arms. ÂŁ1,000. N Cobbold Tel 07776 210237/01473 823167 (Suffolk)

2015 Chafer Sentry 6000e

KNIGHT EUA 3800L, 24m, Muller controller, joystick, auto section control c/w receiver, nozzles selection from cab, auto steering axle, air suspension, compressor, pressure washer, 420-R38 tyres as new, very good condition. ÂŁ19,450+VAT. C Frampton Tel 07748 375665 (Somerset)

12/24/36m, 7140hrs, Topcon 6 section control, Norac boom levelling, 2 sets wheels & demount stand. ÂŁ27,000+VAT. J Sheppard Tel 07787 408656 (Cambs)

1998 Househam Knight

2010 Knight 1835

24m, air suspension, 4102hrs, hyd track adj Muller controls, 4wd, 2/4 wheel steer, 174hp, 6 cylinder Perkins engine with tyres: 380/85R28, 600/60R28

ÂŁ39,750

Bedfordshire

07971 930545

www.henryparrishmachinery.co.uk

KV Exacta-H fertiliser spreader,

www.tvmachinery.com Tel Mike 07764 835562(T)

2010, vgc. ÂŁ2,300 ono. G Blandford Tel 07973 424473 (Hereford)

SPRAYRANGER SP sprayer,

trailed sprayer, 6000L tank, axle steering, 40m/36m boom, GPS control & auto shut off, tidy condition

47-66538

ALLMAN 2000L tank, extension boom, 24m, MOT March 2020. ÂŁ1,999+VAT. D Steele Tel 07872 837410/01775 630256 (Lincs)

ÂŁ3,250+VAT

electric metering, PTO fan, hyd folding booms, Horstine Wizard controller

ÂŁ15,950

Sprint self propelled sprayer c/w 2500L tank, RDS Delta, 2 sets of wheels, 6200hrs, good, tidy sprayer

47-66424

www.tvmachinery.com Tel Mike 07764 835562(T)

BATEMAN RB16, 2000, 11500hrs, 3000L tank, contour boom 12/18/24m, 6 cylinder pump, prime & purge, Bateman twin foam marker, tested till 4/2020, jack legs, 2 sets of wheels, very reliable sprayer. S Dudley Tel 07860 599377 (Essex)

rebuilt in 2013, with new chassis, booms, pump, pipework, wheels & paintwork, 1600L tank, 4ws & 4wd, variable rate controller, immaculate condition, must be seen, excellent lightweight machine. ÂŁ26,000+VAT. J Sills Tel 07398 716782 (Suffolk)

Hardi LHY1000 18m boom

sections with air shut off, RDS Delta 34 rate controller, Patchwork auto section control, wash down kit, triple nozzle bodies, two sets of wheels. R Bradshaw Tel 07976 674931 (Staffs)

Tel: 01778 560111 Mob: 07860 336044

stamfordtractors@btconnect.com

ÂŁ800 Ind hopper, In cab box

stainless steel tank & induction hopper, 24m alloy booms, triple nozzles, 2 sets of wheels, 4ws, auto transmission. ÂŁ12,750. J Dennis Tel 01647 245535/07967 442373 (Devon)

KRM Bredal B6 fertiliser spreader, ďŹ&#x201A;otation & tramline tyres, very good condition throughout. Best offers please. D Eaton Tel 01386 443102 (Worcs)

SPREADERS HOUSEHAM 24m boom, 8

STAMFORD TRACTORS

AGRIBUGGY Stealth, 2000L

KUHN 40.2 M-EMC fertiliser spreader, c/w 24m discs, in immaculate condition, bought new in 2017, so just 2 seasons use, hydraulic control border spread, Quantron R controller. Bargain at ÂŁ13,250+VAT. J Furness Tel 07973 843230 (Glos)

USED Stocks slug pellet applicator for ATV/RTV, c/w frame, manual shut off, 12m spread. ÂŁ100+VAT ono. J Nott Tel 07957 146325 (Norfolk)

www.jmurrell.co.uk

01493 750999

47-66531

Trade advertising â&#x20AC;&#x201D; Tel: 01473 694455 Email: classified@farmersguide.co.uk

47-66542

SANDS Vision 4000, 28/30m,

2012, available Oct 2019, NSTS May 2020, approx 3700hrs Oct 2019, twin lines, Agleader Versa Dual ride 400LPM dual speed pump, 2" hydraulic fast ďŹ ll pump, headland control 14.9x34 rowcrop & 680/55-R26.5 ďŹ&#x201A;otation. R Hinchliffe Tel 07590 227438 (E Yorks)

SANDS 2000L Lowline sprayer, spares or repair, all working, new wheel motor, only 200hrs use. A Watson Tel 07939 056255/01262 468279 (E Yorks)

BATEMAN RB16 self propelled

24m sprayer, 2005, Ag Leader GPS, 8685hrs, 3000L tank, 10 sect auto shut offs, twin pump, triple nozzles, nearly new 540/65/24 tyres & rowcrops, 2 owners from new, regularly serviced. POA. A Doel Tel 07957 820201/01225 752777 (Wilts)

KNIGHT 1836 SP, 2006, 6800hrs, 3600L tank, 24m booms, 400L/min pump, quad nozzles, air susp, Smart Drive, hill descent, traction control, MOT until Feb 2020, reversing camera, wheels 14.9R28 & 700/50R26.5, available 1 August 2019. ÂŁ32,000+VAT. W Finn-Kelcey Tel 07769 664940 (Bucks)

KUBOTA spreader, used for

3 years, bought from new, 1800L capacity, basic, controlled with hydraulics, spread width can be adjusted. ÂŁ2,400+VAT. G Haxby Tel 07816 105237 (Lincs)

TWO pairs of Sulky fertiliser vanes, as new. ÂŁ100+VAT. G Kemp & Partners Tel 01379 783608 (Suffolk)

EVANS & Pearce Broadcaster, 12v, manual shut off. Offers. D Smith Tel 07929 561955 (Herts)

PLEASE

MENTIO

UIDE ERS G ING FARM Y L P S HEN RE W NT RTISEME TO ADVE

194 www.farmads.co.uk July 2019

fg_class_july_19.indd 194

28/06/2019 11:08

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 OVER 50 YEARS EXPERIENCE

LARGE SELECTION OF QUALITY USED MACHINERY

Telephone 01371 830353 Email info@jbrockandsons.com Visit www.jbrockandsons.com

66421

HORSCH Sprinter 6 ST SIMBA GREAT PLAINS 4.6m Cultipress BATEMAN RB15 MF 690 2wd tractor SPEARHEAD Trident 6m folding flail mower 2006 c/w Drill Manager, blockage sensors, 2012 c/w Pro-active tines, levelling paddles, 24m, 1996 c/w 12700hrs, 1986, 3 lever transmission, on farm since 2017, front/rear mounted, centre flail can be Duett coulters ..................................£22,750 hyd brakes ......................................£17,500 2 sets of wheels ..............................£14,850 new, due in............................................ POA used separately, grass flails ...............£9,750

MAIDWELL single leg trailed moledrainer KVERNELAND RG100 8f in-furrow plough KUHN VM 180 6 furrow (5+1) plough AS MARSTON ACE 14t grain trailer WEAVING 4m tine drill 2012 c/w leading disc, c/w hyd variwidth, hyd front furrow, 2004 c/w hyd auto-reset, hyd variwidth, hyd 1997 c/w 550 flotations, hyd door, sprung 2004 c/w track eradicators, following harrow due in.................................................... POA No28 bodies, due in .............................. POA front furrow, H4 bodies ......................£7,500 axles, sprung drawbar .......................£7,250 (Weaving 6m also in stock) ...............£5,650

KUHN 4003/Accord combi drill THOMPSON 14t dump trailer PERFECT KT-270 2.7m flail mower SUMO 4m Trio SPALDINGS 3.5m 7 leg Flatlift 2003 c/w Q-fit tines, CX disc coulters, 1998 c/w tailgate ..............................£4,500 2005 c/w hyd side shift .....................£2,950 2012 c/w auto reset legs, straight front discs, c/w swivel legs, leading discs, Guttler packer, following harrow, pre-em ....................... POA due in.................................................... POA new points & wings ...........................£8,950

SIMBA 4m Toptilth II rigid trailed springtine CULTIVATING SOLUTIONS Rapid Start SIMBA 5m SL BROCK 6.5m Cross Consolidator, VADERSTAD 3m Topdown 1997 c/w front levelling board, 4 rows of RS1000 linkage mounted 1000L liquid ferti 2008, due in.......................................... POA 2015, suits trailing behind cultivator, option 2008, just arrived .................................. POA tines, mid & rear tooth packers ..........£3,850 tank ex Case Quadtrac, will adapt .......... POA for 8.5m, see video ...........................£8,950

Buy and sell online — www.farmads.co.uk

SIMBA 4.6m Unipress VADERSTAD 5m Carrier COUSINS 12.3m Contour rolls SUMO 4m DTS 2013 c/w 5” coulters, RDS rate TWOSE 10’ flat roll ............................£1,450 2006 c/w Pro-Active tines, hyd levelling c/w 2 rows of discs, cast rings ........£10,750 2000 c/w 24” breaker rings ...............£9,950 controller, new ripping legs, hopper & r/view paddles, 700mm DD rings ..................... POA cameras, 875ha, on farm in Kent ........ £24,500

FARMFORCE Ringleader 4.6m double press TWB single leg trailed mole KVERNELAND CTC 5m, 2008 c/w front depth HORSTINE Twin Air seeder KVERNELAND LD85-300 6 furrow plough c/w front board, leading tines, levelling 2013 c/w trash knife ............................. POA wheels, f/discs, auto-reset tines, tungsten 2015 c/w hydraulic fan, manual vari-width, on original bodies ..... POA paddles, done little work ....................£5,450 points, r/discs, racker packer.............£9,750 radar metering ...................................£4,500

FARMET Softer Short Disc, 560mm discs, FARMET Fantom 470 NS 4.7m mounted FARMET Verso 6m springtine, 2018 c/w front FARMET Kompaktomat 6m, 2018 c/w hyd FARMET Fantom Pro 8.5m, 2018 c/w front soil or ring packers, 3m & 8m in stock, 6m stubble cultivator c/w SDR steel ring packer, & rear levellers, double erads, 7m, 8m & 9m levellers, hyd tine depth control, r/tooth levellers, 190mm tine spacing, 6.5m & 12.5m due in, enquire for demo ........................ POA due in, enquire for demo ..................£17,450 also in stock, enquire for demo ........£25,000 packer, see video, enquire for demo ..£29,350 also due in, enquire for demo ..........£58,850

W NE T UC OD PR FARMET Triton 450PS 4.5m primary cultivator BROCK 24.4m rolls 2016 c/w optional hyd BROCK 6m 9 leg Sub-V trailed subsoiler BROCK Campaign 900S 9m G+F tine drill BROCK Sub-Partner 300 3m 6 leg subsoiler 2017 c/w 560mm f/discs, auto-reset tines, levellers, 24” breaker rings, available for sale 2018, done 2500 acres, can be used with 2017 c/w Avadex & slug pellets, Topcon tool bar, 2019 c/w low disturbance legs, 300-375hp, enquire for demo ............£39,500 or demo, see video ................................ POA packer raised ..................................£25,750 section control, for sale or demo ........... POA pictured on Farmet 3m Softer ............£4,250

Woodhams Farm, Cutlers Green, Thaxted, Essex CM6 2RH July 2019 www.farmads.co.uk 195

fg_class_july_19.indd 195

27/06/2019 11:17

“Anything Agricultural”

MILESTONE SPRAYERS Protecting Your Crops And The Environment

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

07850 144244 (mobile 24hrs) • rory@milestonesprayers.com

2015 BAILEY 20T BEETEAPER air brakes, road tyres, arch window, sprung drawbar

2013 BAILEY 10T 26’ LONG BALE/PALLET TRAILER super singles

2009 AS MARSTON 16T GRAIN TRAILER sprung d/bar, roll sheet, chute, floatation tyres

Case TS2600L 12/24m boom, RDS rate control, multi trak drawbar v clean & tidy, all usual Case extras

Case SP3000 3000L 12/24m boom, TeeJet 844 rate control, boom inclination, 2/4 wheel steer, 2 sets of wheels

Case/Gem Sapphire 3000L 12/24m boom, RDS rate control, ind boom inclination, 2 sets of wheels, v well looked after

Knight 3000L Series 4 boom, steering draw bar, ideal liquid fertiliser machine, paser fast ﬁll pump, cheap sprayer POA

Knight/Cleanacres ES3000L Self traking draw bar, RDS Delta 34 rate control, ind 12 & 24m fold, ind attitude, well looked after

Knight ES2000L 20/21m boom, self traking draw bar, clean machine, only 2 owners from new

Knight ES2500L 12/24m boom, auto section ready, self traking draw bar, total refurb 4 yrs ago, chassis stripped/ sandbalsted & painted POA

Case TS3000L 20/21m boom, new RDS delta 32i rate control, boom re-circulation system, multi trak draw bar

Amazone UF 1200 20/21m c/w Muller control, 1200L tank, elec boom tilt, triplet nozzles 6cyl Comet pump, serviced, rinse tank, wheel kit, 1 owner, v tidy POA

POA

SET OF 4 NEW MICHELIN CARGOXBIB heavy duty 560/60x22.5 floatation tyres on 10 stud rims

3000 GALLON VACUUM TANKER 10 stud axles, air brakes, hyd drive pump, full door

2014 BAILEY 15T TANDEM AXLE BEAVERTAIL LOW LOADER 435/50x19.5 wheels

2002 NEW HOLLAND TS90 2WD TRACTOR air con, 2 spools

POA

NEW BAILEY 4T DUMP TRAILER

POA

FRASER M9 BRUISER ROLLER MILL linkage mounted, PTO drive, hopper

POA

Call us for details or see our website for more www.milestonesprayers.com

2003 MASCHIO DM4000 4m power harrow, spare set of new blades

1992 MANITOU MANIREACH 2600 TURBO 9735hrs, tyres 40%, bucket not included

2014 JD 6170R TRACTOR TLS, 50K, autotrac ready, Starfire 3000, touch screen Command centre, 650x42 & 540x30

66405

RICHARD TAYLORvel Tra Machinery Traders, Farmers, Agricultural Contractors & Coach Hire for all Occasions

OVER 100 MACHINES IN STOCK NEW BAILEY 14T X10.2M FLAT BALE/PALLET TRAILER air brakes, sprung d/bar

KONGSKILDE VIBRO BETA 12 row, rear mounted, hydraulic folding inter row cultivator

NEW BAILEY PEOPLE CARRIER weather cover, disabled access

SET OF 4 STOCKS DUALS 340/85x48 & 270/95x36, as new, used once, c/w clamps

SUMO TRIO 2009 3M MOUNTED CULTIVATOR Multipacker, removable discs, new metal ﬁtted £11,950

HORSCH JOKER 3 CT STEEL MASCHIO ROTOTILLER UMI DISC PACKER mono TG bar 3m, completely re-metalled LD point hyd depth adj, hyd packer, as new £17,950 £3,950

SIMBA 6.6M ROLLS c/w breaker rings, lights, excellent condition

GRIFFITHS GRAIN TRAILER 14t, hyd tailgate, full spec – commercial axles

£9,950

CLAYDON HYBRID DRILL 2011 4.8m, immaculate condition

£25,950

2005 GRIFFITHS GHS140 14T TRAILER hyd door, sprung drawbar, chute, good tyres 63729

email: dasservices@btconnect.com website: dasanythingagricultural.co.uk

TRAILERS

t: 01462 442409 Daniel: 07734 328994 Ben: 07850 474511 e: rtaylor2004@tiscali.co.uk

SANDERSON 625 TELEPORTER Solo control, pallet forks on frame, trailer hitch

SEE WEBSITE FOR MORE PICTURES & OTHER STOCK

Main Dealer for

St Ibbs Farm • St Ippolyts Hitchin • Herts • SG4 7NL

SELECTION OF BAILEY SILAGE TRAILERS all on floatation wheels

£4,950

SIDE KNIFE (ELECTRIC) 2014 MF 7620 DYNA-6 TRACTOR removed from New Holland CX860 front & cab suspension, 50kph, air combine brakes, good tyres

66331

Dean: 07836 680004 Peter Scott: 07584 066866 Office: 01522 754733

CLAYDON TERRASTAR 2017 new machine – never been used, c/w harrow option

QUIVOGNE TINEMASTER 4M hyd folding, 2008, r/d/bar & hyd services, lights, £14,950 immaculate £9,950

www.richardtaylortravel.co.uk

Selling 2nd

FREELANDER TD4 SPORT PREMIUM 2005, diesel, leather interior, excellent condition, MOT Jan 2020 £3,500

y in 1st class hand machiner

order!

PART EXCHANGE WELCOME Ex works • All prices + VAT

196 www.farmads.co.uk July 2019

fg_class_july_19.indd 196

27/06/2019 11:19

0% finance

All prices subject to VAT

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

JD 6120R ‘17, 837 hrs, TLS+, AutoQuad+ 40k, 3 E-SCVs, AutoTrac, ex-hire £61,500

JD 7710 ‘02, 10468 hrs, PowrQuad 40k, TLS, 3 SCVs, PUH, radio £28,000

JD 6175R ‘15, 5500 hrs, 10” display, AutoPowr 50k, 4 E-SCVs, AutoTrac £66,500

JD 6210R ‘13, 3199 hrs, TLS, DirectDrive 40k, 3 SCVs, HCS, command centre £59,950

JD 8370RT 2017, 698 hrs, ex-hire, E23 40k, prem Commandview III Cab, 5 SCVs, SF6000 - SF1, 10” command centre display, CAT 4 drawbar, 30” Durabuilt 6500 tracks, PowerGard £190,000

E Massey Ferguson 6480 ‘06, 7800 hrs, Dyna 6 40k, BKT tyres, 3 M-SCVs £26,000

E Fendt 716 Vario ‘05, 8625 hrs, 50k, 4 spools, air con, front linkage £34,500

E Challenger MT775E ‘16, 3394 hrs, Powershift, 4 E-SCVs, Trimble, 30” tracks £122,000

Manitou MLT 741 V+ Prem ‘17, 1503 hrs, vario+ hydro, hyd locking, d/a PUH £56,750

Manitou MLT 960 Elite ‘16, 7470 hrs, JSM joystick, hyd locking, fixed forks £35,000

Hitachi Zaxis 19U ‘15, manual hitch, hammer circuit, 3 buckets, blade £12,000

Hitachi Zaxis 130LCN-5 ‘13, 4995 hrs, hammer circuit, hyd hitch, 3 buckets £45,000

JCB JSL160 ‘01, 15075 hrs, 3 buckets, hyd quick hitch, steel tracks £13,500

JD T560i ‘12, 891 drum hrs, 620R header, AutoTrac, Zurn rape extension £102,000

JD T660i ‘09, 1292 drum hrs, 625R header, rape side knife, AutoTrac, SF1 £87,000

0% finance

N JCB 540-140 HIVIS ‘18, 355 hrs, Powershift, pallet tines, self levelling £57,000

B JD 7230R ‘12, 3279 hrs, CommandQuad 40k, PUH, TLS+, 4 E-SCVs £57,950

JD S790i ‘18, 536 hrs, 640X header, 2 side knives, 4600 display £338,000

JD S690i ‘13, 1798 hrs, 635X header, 2630 display, ITC receiver £135,000

JD 9780i CTS ‘05, 2186 drum hrs, chopper, 625R header, Zurn extension £63,000

Massey Ferguson 9280 ‘12, 650 drum hrs, 30ft power flow header, side knife £55,000

N John Deere 592 ‘07, 2.2m wide pick up, RotoFlow, compressor roller £13,000

A Lely 725CD Hibiscus Rake ‘09, twin rotor, hyd folding, road lights £5,500

McConnel PA8000TT ‘05, 1.2m head, front flap& skid kit, JD 7930 brackets £8,250

McConnel Topper 9 ‘18, 2.75m cutting width, twin rotor, PTO drive, ex-demo £3,750

B Claas Lexion 570+TT 2006, 2000 drum hrs, Hydrostatic 30k, straw chopper, chaff spreader, V900 30ft header, grain loss monitor, 500/65R24 Goodyear 60%, 25″ tracks 80% £77,500

B Grimme GT170S ‘12, dbl multi-sep, auto levelling, centre share, terra control, box filing chute £80,000

C JD 840i ‘15, 36/24m boom, BoomTrac, SF3000, 2630 display, hill kit £39,500

N Sands 2000 Lowline ‘97, 5420 hrs, 18m booms, SAM air control, tyres 70% £11,000

Grimme Varitron 220 ‘13, ctr Kuhn HR4003 Power Harrow share, hyd intake, cameras, ‘01, packer roller, marker 45/40/35 80mm/8mm 34″, boards, tines 80% canopy £225,000 £4,250

Kuhn Multi Leader ‘17, ex-demo, 7 furrow, LPO 66D wide furrow bodies, ZXL skimmers £24,500

N Kuhn Axis 40.2HEMC ‘15, S6 discs, XL1800 extension, hopper cover £15,000

C Kuhn Axis 40.1 W ‘12, 3200L hopper, hopper cover £4,750

B JD XUV855M ‘17, 310 hrs, ex-demo, Maxxis Bighorn tyres, Datatag, manual lift, bucket seats £13,350

Buy and sell online — www.farmads.co.uk

N Bunning MSL120MK4TVA ‘18, ex-hire, screw jack, spinner deck, wide angle PTO, hyd brakes £30,000

Over 800 used items at www.benburgess.co.uk | Please contact your local depot on: (A) AYLSHAM 01263 734311 | (B) BEESTON 01328 701347 | (C) COATES 01733 840777 (E) ELLINGTON 01480 890990 | (NM) NEWMARKET 01638 577877 | (N) NORWICH 01603 628251 or contact Charlie Oldfield on 07825 932 221 July 2019 www.farmads.co.uk 197

fg_class_july_19.indd 197

27/06/2019 11:21

A DOWNING WORKING DEMO & OPEN DAY

65 reg McCormick X60-40 110hp, front weights, a/c, 4wd, 40kph, aux hyd tank, passenger seat 790hrs

POA

June 2018 McCormick X6-430 & MC100 loader 121hp boosts to 130, 4wd, luxury a/c cab

£57,295

Ovlac FF 4+1 plough hydraulic furrow width, hydraulic front furrow, rear disc & depth wheel

£17,845.20

NEW McCormick X4-40M tractor, 4wd, 75hp engine, 12x12 speed transmission, spacious easy clean cab 0% Finance £29,995

NEW McCormick X4-440 2wd 75hp, 16x16 speed transmission, spacious easy clean air con cab, PUH, full warranty (library picture) POA

Pegoraro 3m power harrow packer roller, adjustable clod board, tine wheel eradicators

£9,500

Friday 27th September 10am – 8pm

2019

h, Dyke, Goreﬁeld, Wisbec at Carlton Farm, Cattle R Cambridgeshire PE13 4N

eld with the We will be working in ﬁ e McCormick tractor rang Ovlac NC, KRM, Pegoraro and implements REFRESHMENTS WILL BE

AVAILABLE

Due to continued growth

New NC 16t tandem axle beaver tail with sprung New NC 1850-14 14t I Series grain trailer ramps, plant low loader, hyd brakes & sprung dual air/hyd brakes, load sensing, r/over sheet, drawbar 560x60x22.5 tyres, hyd taildoor, g/chute & s/d/ £10,450 bar, Hardox ﬂoor £18,900

SKILLED AGRICULTUERDAL UmIR Q E R R E E ENGIN tea d to join our dedicate TOP RATE OF PAY • NEW

VAN • PENSION SCHEME

64347

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

AGRICULTURAL ENGINEERS & MACHINERY TRANSPORT

Pegoraro W5000 heavy duty folding power harrow eradicator tines, 500ml packer roller, 250hp gearbox, adj clod boards, slip clutch, PTO

McCormick X8 available for demo now up to 310hp

OTHER MACHINERY McCormick X7-660 Efficient ex hire, 50kph, creep speed, air brakes, from 288hrs ........... £69,500 Pegoraro D3000 3m p/harrow, h/d, packer roller, eradicator tines, slip clutch, PTO ............. £9,500 Pegoraro D4000 4m p/harrow h/d, split packer roller, eradicator tines, slip clutch, PTO .... £10,500 Pegoraro W5000 folding power harrow, 250hp gearbox, fluo system floating beds, wheel track eradicators, packer rollers, adjustable clod board, in stock ............................. £19,500 Tomlin 4’, 5’, 6’ & 8’ mowers........................................................................................ from £875

Carlton Farm, Cattle Dyke, Goreﬁeld, Wisbech, Cambridgeshire PE13 4NR

Tomlin/Kubota 6’ chain harrow, ex demo, as new.................................................................. £395 3t tipping trailer ........................................................................................................... from £490 New Ovlac 3m chisel cultivator .......................................................................................... £5,500 Bomford Bandit 2.5m flail mower, new flails, good working order ....................................... £1,400 Downing 2.5m spring tine paddock harrow ........................................................................ £1,295 2 x 6’ finishing mowers ......................................................................................prices from £575 All prices plus VAT unless otherwise stated

Tel: 01945 410099•07850 731409 www.adowningengineers.co.uk 198 www.farmads.co.uk July 2019

fg_class_july_19.indd 198

27/06/2019 12:07

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 MOBILE water bowser, 100 gallons. £140. R Sinkler Tel 01377 270251 (E Yorks)

FOR SALE

PLASTIC ex juice container, 1000L. S Jones Tel 07796 001370 (Norfolk)

& WANTED COLLECTION & DELIVERY arranged

MF38 cultivator, c/w transporter, extra legs available if required. A Simpson Tel 01738 840111 (Perth & Kinross)

Remote tank monitoring system

49-66335

RAPE, WHEAT & BARLEY STRAW STRAW IN THE SWATH WANTED for home market & export

BEST PRICES PAID

01284 810751 07768 353910

EVANS & Pearce Electro

Broadcaster, plastic hopper, new motor ﬁtted last year, good used condition. £100 ono. S Entwistle Tel 07940 102304 (Northants)

QUANTITY of wheat, oat & rape straw available, in 80x70 quadrants, barn stored. A Thompson Tel 01953 860353/07884 480302 (Norfolk)

50-66272

pad500r@hotmail.co.uk

Diesel or AdBlue

07870 916 888 info@i-levelapp.com www.i-levelapp.com

STEEL

S SCOTT & SONS Ltd Steel Stockholders

Galvanised roofing sheets, box profile and corrugated Delivery service

01359 269378

SPRING barley straw round bales, dry stored, net wrapped. £12/ bale. K Ollett Tel 01359 270047 (Suffolk) HAY available, 2019, small or big bales, collected ex ﬁeld. Tamworth. E Calcott Tel 01827 62265 (Staffs)

ABBOTT & CO (Wessex) LTD Are buyers & sellers of

HAY & STRAW

4-FOOT round hay bales, wrapped, cattle feed, 70 bales, Ipswich. £20 each. Can deliver if needed. L Johnston Tel 07713 241440/01473 652185 (Suffolk)

49-65623

HAY For Harvest 2019 willing to take off field prefer big bales please call

Andrew Lloyd 07787 551081

ROUND barley straw bales. M Beckett Tel 01206 679865 (Essex)

WHEAT straw, 4’ x 3’, six string. POA. J Rogers Tel 07971 234126/01432 870216 (Hereford) BARLEY straw 80x70 quadrants (120), barn stored. A Thompson Tel 01953 860353/07884 480302 (Norfolk) QUANTITY of good quality wheat & barley straw, in small conventional bales, from 2018 harvest, barn stored, no outside bales, ideal for stable, good loading & access. R Mansﬁeld Tel 07719 717101 (Oxon)

TANKS BUNDED fuel tank, 11000L. £1,000. K Ollett Tel 01359 270047 (Suffolk) 600-GALLON steel diesel tank, on stand, with ﬁller hose. S Jones Tel 07796 001370 (Norfolk)

440l

Ex VAT

£499

TELEPHONE: 01604 686216 MOBILE: 07973 265378

HANKINS ENGINEERING www.maidwellmoler.co.uk

£595 01353 862044

STORAGE TANKS SALE & HIRE 1,000–15,000 gal mild steel, stainless steel, bunded & glass lined

LARGE STOCKS COMPETITIVE PRICES

MCCONNEL Shakaerator 5 leg with rear hydraulic linkage & top link, as new metal, good paint. £2,500. R Eyre Tel 07760 102929 (Norfolk)

Visit our new website www.thekinggroup.co.uk/tanks

01638 712328 Suffolk 01992 451629 Herts/Essex USED Harlequin 5400 BND bunded fuel tank. £895+VAT. H Carr Tel 07831 659787 (Lincs)

01603 870903 07860 475964

STRAW & HAY

WANTED

squashing those big rows of straw under your tractor. £1,000+VAT. R King Tel 07929 424474 (Notts)

TILLAGE TACKLE SIX 24” Cambridge roll rings.

GW Harrold & Partners Tel 07836 751076 (Norfolk)

10,000L steel bunded DERV

LELY power harrow, 3m, good tines, works well, PTO needs attention. £400 ono. N Bailey Tel 01206 230511 (Essex)

diesel tank, c/w electric pump with 6 vehicle recorder. £1,000 ono. P Hinch Tel 07866 604132 (Leics) 50-63492

Posts for grain walling and silage clamps

00-60677

All types of steel available new and secondhand

FRONT straw press, ideal for

220l

50-63480

working order, new UJ on PTO. £200. L Wilderspin Tel 07938 565851 (Cambs)

49-65636

VICON wagtail spreader, good

STEEL fuel tank, 600 gallon. C Brown Tel 07979 632866/01255 870253 (Essex)

Ex VAT

Well proven design Single and twin and three legged machines available Mounted and trailed

Buy and sell online — www.farmads.co.uk

• Check liquid levels from anywhere in the world using your mobile phone • Keeps farmers informed so that they do not run out of fuel or liquid fertiliser • Helps manage stocks and buy efficiently

66,000-LITRE tank, 2" banjo couplings, 4 legs, currently in use, available end of June. £7,500+VAT ono. L Sutton Tel 07970 658813 (Warks)

MAIDWELL MOLER

51-66153

P J Reed

SPREADERS (cont)

REGAL TANKS INDUSTRIAL STORAGE TANKS HIRE • NEW • USED

01502 710100 Fully searchable database at...

www.regaltanks.co.uk

BASELIER rotavator, strong, well made with very good metal, 2.1m working width, rotary hook tine cultivator. £800. J Mayes Tel 07769 675104 (Essex)

SET of trailed Cambridge rolls, 22" rings. £800. R Andrews Tel 01223 207300 (Herts)

www.farmads.co.uk

KONGSKILDE 3m front Terra

discs, in vgc, stored inside, hydraulic angle adjust. £3,500+VAT. W Bryce Tel 07894 912341 (Suffolk)

July 2019 www.farmads.co.uk 199

fg_class_july_19.indd 199

28/06/2019 11:23

200 www.farmads.co.uk July 2019

fg_class_july_19.indd 200

27/06/2019 11:29

Trade advertising â&#x20AC;&#x201D; Tel: 01473 694455 Email: classified@farmersguide.co.uk

Buy and sell online â&#x20AC;&#x201D; www.farmads.co.uk July 2019 www.farmads.co.uk 201

fg_class_july_19.indd 201

27/06/2019 11:29

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Over 220 quality used machines at www.reavalleytractors.com 21018742

11018464

21016840

31018035

41019527

31019460

JOHN DEERE S680 2014 COMBINE engine 1210hrs, 2WD, Prodrive, Harvest Smart, 6.9m auger, autotrac. £POA

JOHN DEERE S685i 2015 COMBINE 4WD, engine 1632hrs, Auto Trac i-Pack, Pro Drive Harvest Smart, 630X header. £POA

JOHN DEERE W540 2011 618R 18ft header with side knife, Hours 844/1099, Straw chopper. £POA

CLAAS 870 SPFH, 2017 24 knife drum, high vol additive, 300 HD pick up, 919 drum, 1123 engine hrs. £175,000

2010 JOHN DEERE 7450I SPFH ProDrive 40kph, Harvest Lab,Integrated AS, 5123hrs engine, 3120hrs drum. £70,000

NEW HOLLAND FX58 SPFH 2001 Excellent condition, Engine 4875hrs, Drum 3489hrs. £29,000

21014271

11019871

11018925

11019624

31017726

11019590

JOHN DEERE 7310R 2017 AP 50K, AutoTrac Ready, Front Linkage+ PTO, TLS, 5 ESCV, LEDs, 2387hrs. £131,500

JOHN DEERE 6215R 2016 AP 50K Front linkage AutoTrac ready, GEN 4 Autotrac Activation, 4663 hrs. £81,000

JOHN DEERE 6210R 2014 AP 50K, Cab Susp., TLS+Brakes, Autotrac ready, 4ESCV, front links, PTO, 4914 hrs. £70,000

JOHN DEERE 2017 6195R 50K, 2202Hrs, TLS + CAT Suspension, Air Con, AQ, Sun Roof, Passenger Seat. £POA

JOHN DEERE 6195R 2017 AQ+ 50K, 20/20, 7” Command Centre Display, 4100 processor, TLS+brakes, 600hrs. £90,000

JOHN DEERE 6190R 2014 AP A/P 50K, 8073hrs, Front linkage and PTO, TLS, Cab suspension. £47,000

11018653

41019549

41019870

21014774

11018847

JOHN DEERE 6130R 2017 EX HIRE TRACTOR 6130R, AQ 40K, TLS + 1879HRS,Cab suspension, front loader. £65,000

JOHN DEERE 6170R & H360 LOADER 2014 AP 50K, TLS, Air Con, Sun roof, new front tyres, 6842hrs. £60,000

JOHN DEERE 5100M & LOADER 2017 543R Loader, Power Reverser HiLo 32/16, 3SCV, 4WD Front Axle, 204hrs. £63,500

JOHN DEERE 5125R 2017 40K, with 603R Front Loader, Euro Head Stock, Air Con, Passenger Seat, Sun Roof 983 hrs. £52,000

JCB 527-58 2014 Air Con, Varispeed, Pin & Cone headstock, PUH, LED boom lights, 2431 hours. £34,000

JCB 526-56 AGRI, 2015 Qfit headstock & tines, tyres:460/70 R24 rear 20% front 10%, 3455 hrs. £33,000

11018460

11019138

31019957

41019336

41019335

11016172

MERLO 40.7, 2014 Pin & Cone Headstock, 4630 hrs.

JOHN DEERE C440R COMBINATION BALER 2015 2m Pick up, 1000 RPM Gear Box, 4163 bales, 185 hrs £POA

TANCO 1400 EH AUTOWRAP 2015 20,000 bales. Very good condition c/w remote control kit. £10,000

JOHN DEERE 331 MOWER CONDITIONER 2011

JOHN DEERE 131 MOWER CONDITIONER 2011

KUHN FC 303 YGL TRAILED MOWER CONDITIONER 2002

£6,750

21014283

EX HIRE

£30,000 21019417

41015925

21016916

xx 11016247

11019920

JOHN DEERE 328A 2007 MOWER CONDITIONER Rear mounted single mower conditioner £POA

KUHN 283 MOWER CONDITIONER, 2012 With lift control.

NEW MCCONNEL MAGNUM PROFI MEGA 270 TOPPER 2018 cutting through vegetation up to 100mm thick £7,500

JOHN DEERE 855D GATOR, 2012 Doors, bucket seats, 30-40% tyres 1202 hours. £POA

JOHN DEERE GATOR 855D S4 2017 Electric tip, bucket front seats, bench bar, Detachable windscreen +roof. £9,500

£6,000

£POA

ISUZU UTAH PICK UP TRUCK 2018 Huntsman 1.9

Manual, Gun draws, Under guard protection, Alloys, 26,000 miles. £27,000+VAT

All prices ex VAT

Rea Valley Tractors Ltd NEWPORT

SHREWSBURY

enquiries@reavalleytractors.com

Call: 01743 289104 SUDBURY

WELSHPOOL

www.reavalleytractors.com

202 www.farmads.co.uk July 2019

fg_class_july_19.indd 202

27/06/2019 11:31

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 SIMBA 3.8m Cultipress, with leading tines, good rings & transport wheels, very good condition & ready for work. K Potter Tel 01223 290349 (Cambs)

TILLAGE TACKLE (cont)

Väderstad Rexius Twin

RST 630

More photos and full spec at www.writtlefarmmachinery.co.uk

07748 004794 01245 442224(T)

d New & Usees ar p S e in h Mac & Repairs

Andy Guest 01636 700608 07860 637654

TWOSE 6.4m vertical fold ring

rolls with breakers, rings still sharp. £3,300+VAT. R Brown Tel 07802 397258 (Bucks)

6.2-METRE hydraulic folding

POWER

rolls. £1,600+VAT. F Hardy Tel 07957 855180 (Notts)

HARROW

BREAKERS els KRM 3m front steering press,

AMAZONE Catros, 3m, factory

ﬁtted seeder mounting platform, steps & seed outlet bar, following harrow, Advantage 3 leg subsoiler bar, excellent condition. £10,000+VAT. P Rix Tel 07766 768705 (Cambs)

weight 1500kg, water ballast weight 750kg, total weight with water 2250kg, had very little use, more pics on FG FarmAds website. £3,950+VAT ono. P Appleby Tel 07850 317403 (Co Durham)

od Many makes & m spares new & used

R M Dove

01759 302279 07779 245466 www.powerharrowspares.co.uk SIMBA Series 2B discs, trailed, not folding, average condition. £2,200+VAT. V & R Waspe & Sons Tel 01449 612607 (Suffolk)

SIMBA 3m disc harrows, Series 2B with depth control adjustment & tow bar, good condition, buyer to collect. £3,400. S Snowden Tel 07779 140120 (N Yorks)

OSR Coulter

e: info@andrewguest.co.uk

WEAVING stubble rake, 6m hydraulic folding, 5 rows of tines, c/w LED lights, done very little work since recent tine change, paintwork good. S Metcalfe Tel 07540 889513 (N Yorks)

SIMBA 9.2m (30') trailed pigtail tined cultivator, in good solid condition, ready to go straight to work. £4,295+VAT. J Furness Tel 07973 843230 (Glos) SIMBA Series 3B disc harrows, 3.8m wide, with rear drawbar & hydraulic services, new blades ﬁtted, ready for work. K Potter Tel 01223 290349 (Cambs)

KNIGHT Xact, 5m wide,

2013, selling due to change in farming policy, little used, self-reset close spaced tines, followed by discs, 2 types of packer available, trailed version of Knight Raven, nice machine. £18,000. P Seabrook Tel 07831 834068 (Cambs)

SET of straight tine harrows (4), 11', good condition, both with a stretcher, buyer collects. £60 each ono no VAT. K Butters Tel 01507 466436 (Lincs)

GRANGEWARDS (THE HARROW KING)

Pan Busters & spirals ALL BLENCH SPARES 454 Herne Road, 51-63455 Ramsey St Mary’s, Huntingdon, Cambs.

01733 844590 (24hrs)

HORSCH Terrano 6m FM

with hydraulic traction assist 550mm double packer, c/w 4 rows of terragrip legs, 2016, excellent order. £36,000+VAT. M Fisher Tel 07976 622090 (Norfolk)

Double Disc Assembly, adjustable rubber depth wheel, tension spring & scrapers, ideal for rape planting with subsoiler

01386 49155

KV crumbler roller, 4m, off PHB

power harrow, c/w bearings. £200+VAT ono. J Nott Tel 07957 146325 (Norfolk)

MASCHIO New power harrows New rotary cultivators New flail mowers New spare parts Direct from an importer

TR Smith Ltd

01362 668286

KONGSKILDE Germinator

SP 6000, trailed, 1990, 3 available, varying ages. GW Harrold & Partners Tel 07836 751076 (Norfolk)

KONGSKILDE Vibroﬂex 4m manual fold stubble cultivator, vgc, all straight with new bolts where needed, recent new depth wheel & depth control handle, 8 new spare points & 4 spare legs with top springs. £950 ono. J Jordan Tel 07535 990066 (Suffolk) BROWNS single leg subsoiler, good condition. £350. B Clarke Tel 07799 881727/01953 857406 (Norfolk)

trsmith120@aol.co.uk www.trsmithagmachinery.com

FOUR genuine Cousins 24” breaker rings. GW Harrold & Partners Tel 07836 751076 (Norfolk)

SET of seed harrows, 9', good condition, with a stretcher, buyer collects. £40 ono no VAT. K Butters Tel 01507 466436 (Lincs)

5-LEG rake ripper cultivator.

GW Harrold & Partners Tel 07836 751076 (Norfolk)

COUSINS 4m Giant 36" press, with transport kit, very little work, rings still sharp like new, nice condition. £1,500 ono. K Potter Tel 01223 290349 (Cambs)

New HE-VA rolls in stock

available for immediate delivery, 22"-24" rings, horizontal folding, contour following

51-66476

SUMO Trio, shearbolt legs, good condition, c/w a new set of feet (not in photo). J Rogers Tel 07971 234126/01432 870216 (Hereford)

£198 + VAT & Del

KNIGHT Triple press, 4m folding, leading tines, knock on points, levelling boards, double press & rear drawbar, good condition. £4,000+VAT. P Rix Tel 07766 768705 (Cambs)

51-65696

SIMBA Solo 3.3m ST with DD packer & depth loosening legs, in very good order. £8,500+VAT. M Fisher Tel 07976 622090 (Norfolk)

51-64883

www.andrewguest.co.uk

Buy and sell online — www.farmads.co.uk

Kuhn Power Harrows Drills & Accord

MCCONNEL Shakaerator, 3m, 7 leg, Giant packer, 2009, c/w pallet of spares. L Sutton Tel 07970 658813 (Warks)

SPRINGTINE harrow, 8', with spare points. £100. N Bailey Tel 01206 230511 (Essex)

51-63445

COUSINS Contour 6.4m rolls, 2010, 24" rings c/w breakers, hydraulic folding, vgc. £6,000. M Abblitt Tel 07720 839253 (Cambs)

HAYLOCK Triple Task progressive mounted heavy cultivator, 3 & 4m with packers, winged sweeper & subsoiler tines, will go straight to work, can remove tines to required number. £3,500+VAT. R Lane Tel 07831 615912 (Cambs)

51-66478

2010, a nice example with good rings, still the best heavy land press available

51-66475

£26,850

more photos and full spec at www.writtlefarmmachinery.co.uk

07748 004794 01245 442224(T)

July 2019 www.farmads.co.uk 203

fg_class_july_19.indd 203

28/06/2019 11:31

OLD RIDES FARM EASTCHURCH KENT, ME12 4BD

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

TEL: 01795 880224

PARTS AND DISMANTLING

COMBINES: JOHN DEERE: T670i, W540, 9580 WTS, 2066, 2264, 2258, 2058, 1188, 1177, 1166, 1085, 1075, 1065, 985, 975, 965, 955, 952, 950, 630, 530, 8820. CLAAS: Lexion 600, 580T, 570T, 480, 460, 440, 430, 218, 118, 116, 115, 114CS, 108, 106, 105, 98, 96, 85, 76, 70 NEW HOLLAND: CR9080, CR980, TX66, TX68, TX36, TX34, TX32, TF78, TF46, TF44, TF42, 8080, 8050, 8040, 1500’s, 133 MASSEY FERGUSON: 7278, 40RS 38, 34, 31, 29, 27, 865, 760, 750, 665, 504. DEUTZ FAHR: 6090, 4090, 4080,4075, M3630, M3610, M2780, M2680, M1002.LAVERDA: 152, M120. CASE: 1660, 2188, 1460, 1680 JOHN DEERE TRACTORS 8520, 8400, 8200T, 7800, 7530, 7430, 6930, 6900, 6800, 6430, 6110, 3650, 3130, 2140, 2040, 1640 FORKLIFTS: JCB: 531-70, 530-70, 525-58, 520-4, 414, 926.CLAAS: Targo C50, K50 Ranger. MATBRO: Telestar, Teleshift, 280, 270, 250 MANITOU: 2600, MLT 633.MERLO: 40.7, 30.6 Multifarmer, 28.7, 26.6. JOHN DEERE: 3800, 3420, 3415, 3200. MASSEY FERGUSON: 8295.TEREX: 250 BALERS: NEW HOLLAND: 1210, 1010S, D1000, BB940, 841, 835, 7070, 750, 740, 654, 650, 644, 640, 648 JOHN DEERE: 680, 644, 592, 590, 582, 578, 575, 550, 342, CASE: RBX435.CLAAS: Quadrant 2200,1200, Rollant 255, 280, 180, 46, 44, Vari, Hesston 4900, 4800, 4750. VICON: LB12000, LB8200, MP800, RV1602 WELGER: D6000, D4000, 520, 435.VICON: LB12000, LB8200, MP800, 1601, RV1602, MASSEY FERGUSON: No.5, 2190, 2170, 2160, 190, 187, 185.SUPERTINO: 60-120 MOWERS: KUHN: Alterna 500, FC283, FC313. JOHN DEERE: 328, 228, 131, 1360. POTTINGER: Novacat, Eurocat. KRONE: AM20, 32P, AMT 4000CV, Easycut 32CV, Easycut 2800CV. LELY: Optima 240C, Splendimo 280FC. MAJOR: Toppers. FORAGER HARVESTERS: CLAAS: 930, 695, 690, 75

FOR PARTS CALL DAVE 07770814967

TRACTORS

WWW.BURDENBROSMACHINERY.CO.UK

New Holland 575 Baler 2007, Hydraulic Pickup, Very Good Condition

Claas Nexos 230F - 2011, 40K, A/C, Air Seat, 4 x SCV, Radio, PUH, 6793 Hours

CAT TH330B – 2005, 7.2m Reach, 3.2Ton Lift, 40K, A/C, PUH, Air Seat, 6293 Hrs, Very Good Condition Extensions, AMADOS III-D Control, Road Lighting

Massey Ferguson 7272 – 2004, 20ft Powerflow Header, Chopper & Chaff, AutoLevel

Landini Rex 70V – 2001, 2 x SCV, 2 x Midmount SCV, A/C, Radio, 36km/h, 118cm Wide

Welger AP730 – 2014, Hyd Pickup, Hyd Drawbar, Good Condition

For more info call James Bowring on 07500 786742 or head office on 01623 847171

Fendt 828 2016

Fendt 824 2012

Profi plus, Vario, Front linkage, 4 rear spools & 1 front, Hydraulic top link, Full suspension, Wheel weights, 650 & 600 tyres, 4883 hours

30022105 £64,000 F

10022232 £82,000 W

Profi plus, Trimble RTK but can be removed, Warranty available, 60kph road speed, 5 rear spools & 1 front, Evo seat, Wheel weights, IF710 & IF600 tyres with 90% tread left, 850 hours

10022117 £79,000 W

10020472 £163,000 W

MF 7715 2017

MF 7726 2015

MF 5612 2016

MF 8690 2010

Dyna VT, 50kph, Full suspension, Climate control, 4 rear spools, Datatronic screen, 800 & 600 tyres with 50% tread left, 3498 hours

Dyna 4, 40kph road speed, MF955 loader, Autohitch, Low profile cab, Air con, Air seat, Large mirrors, 2 rear spools, 420 & 340 tyres with 30% tread left, 5365 hours

20021514 £61,500 T

30021530 £68,750 F

30022217 £35,750 F

10021899 £54,950 W

20021846 £22,000 T

Profi Plus, Vario, Loader ready only, Full suspension, Front linkage, 4 rear spools & 1 front, Air, 650 & 540 tyres, 8692 hours

Dyna 6, 50kph, Joystick, 4 rear spools, Full suspension, Air & hydraulic brakes, Superluxe air seat, 650 & 540 tyres with 70% tread left, 1018 hours.

Profi Plus, Vario, 60kph, Vario grip, Warranty until 6000 hours or August 2020, Wheel weights, 5 rear spools & 1 front, Hydraulic top link, IF710 & IF600 tyres, 5244 hours

Dyna 6, 50kph, Air & Hydraulic brakes, Full suspension, 4 rear spools & 1 front, Front linkage, Warranty remaining, Large mirrors, 650 & 600 tyres with 50% tread left, 2420 hours

Dyna 4, Efficient spec, Autodrive 40kph, 100 l/min pump, 4 rear spools with two of them fingertip, Cab suspension, Auto air seat, Air con, 18.4 & 14.9 tyres with 50% tread left, 2384 hours

Fendt 939 2018

Challenger MT775E 2015

Fendt7202014

Powershift, 405hp, 4 rear spools, 3 position drawbar, 223 l/min hydraulic pump, 16 Idler weights & 18 track frame weights, Auto guide ready, 30” tracks, Comfort pack, 1600 hours .

10021722 £138,000 W

MF 5445 2009

204 www.farmads.co.uk July 2019

fg_class_july_19.indd 204

27/06/2019 11:57

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 TILLAGE TACKLE (cont)

MF137 folding springtine harrow, gc. C Brown Tel 07979 632866/01255 870253 (Essex)

SIMBA Flatliner 500 legs & points (7), plus spare points, vgc. £500 for the set. W Beers Tel 01604 781494/07712 435168 (Northants)

coil with star wheels, then rings. £650. C Juhl Tel 07836 735830 (Essex)

LEMKEN crosskill press, 2.5m,

in good working order. GW Harrold & Partners Tel 07836 751076 (Norfolk)

KONGSKILDE Vibromaster

5.4m c/w rear harrow, depth wheels, very good condition. £1,400+VAT ono. E Clark Tel 07879 698807 (Norfolk)

JONSERED RT5 garden/ horticultural rotovator, 5hp petrol wheel driven engine, forward & reverse, runs very well, can be seen working, cash on collection. £300. C Giblin Tel 01245 464905 (Essex)

LEMKEN S110 WDP-70 furrow

WILDER 4.8m pressure harrow,

4 section, with rear rollers. £550, C Juhl Tel 07836 735830 (Essex)

press, 27 ring at 45deg, 2014, machine is unused, able to be used on 3pt linkage as well as conventional press arm. £7,000+VAT. M Fisher Tel 07976 622090 (Norfolk)

BLENCH 3m pigtail cultivator, with 3 rows of tines & depth wheels. £900. R Hanton Tel 07860 792976 (Norfolk)

TRACTORS

CASE Puma 230 CVX Vario, 230hp, 270hp PTO, 5 electric spools, front links, 650/65R42 new, 540/65R30 30%, 3900hrs, Trimble 750 RTK EZ-Pilot available. £52,000. E Waters Tel 07825 641904 (Kent)

MF 7624 Dyna 6 Exclusive

TRACKS SIMBA 2B 12’6” folding disc harrows, c/w rear drawbar & hydraulics, hydraulic folding & front gang angle, rear scalloped discs 22–23”, front plain discs 20–21”, good tyres, good condition. £2,500+VAT ono. J Nott Tel 07957 146325 (Norfolk)

KONGSKILDE Vibro Flex VF2011, 3m, 11 tine, front or rear mounted, vgc. £1,500+VAT. G Wilson Tel 07966 421906 (Beds) DOWDESWELL twin row cast wheel furrow press, to suit 5 furrow plough, average condition. £495+VAT. J Brook Tel 07957 846865 (Lincs)

CAMBRIDGE triple gang rolls, SIMBA double press. £1,200+VAT. F Hardy Tel 07957 855180 (Notts)

9', + two 5' pups, good condition, buyer collects. £800 ono no VAT. K Butters Tel 01507 466436 (Lincs)

SUPERIOR AgriTraxx® Polyurethane Midrollers to fit various tracked tractors.

Keith Davies Agricultural Ltd

Call Trevor 07976 735441

CONCEPT 4m Speed Till, 2 rows pigtail tines & packer roller, then another 2 rows of tines & second packer. £1,700+VAT. P Freeman Tel 07711 145124 (Lincs)

LEMKEN Smaragd 9,

6m mounted, with twin crumbler, in very good order. £4,500+VAT. M Fisher Tel 07976 622090 (Norfolk)

MILES mole drainer, single leg, trailed, good leg & foot, ﬁxed drawbar, single acting hydraulics. £1,950 ono. W Campbell Tel 07738 955496 (Cambs)

HE-VA King roller, 12m, Saturn

system, 24” breaker rings, comes with StocksAg Pro 130 Fan Jet fully ﬁtted, LED beacon & lights, excellent condition. £13,000+VAT. M Houldcroft Tel 07496 387714 (Rutland)

• Longest Wear Life – provides up to 4 times more wear life than most OEM replacement wheels. • No Bond Failures Guaranteed. • Extend Rubber Track Life – lower operating temperatures, reduce rubber track deterioration. European Distributor:

RANSOMES trailed disc harrows, spares or repair. Offers. F Howell & Sons Tel 01760 440297/07798 668239 (Norfolk) MOUNTED mole drainer, 3pt linkage. £700. M Abblitt Tel 07720 839253 (Cambs)

52-66463

AMAZONE Catros 4001 4m

compact mounted folding disc cultivator, with wedge ring packer roller, always barn stored, superb condition. £7,895+VAT ono. L Smith Tel 01489 896785/07836 252598 (Hants)

2013, 3500hrs, 50k full suspension, 710 tyres

DUCK foot tine harrows,

11', good condition, with a stretcher, buyer collects. £60 ono no VAT. K Butters Tel 01507 466436 (Lincs)

DOWDESWELL ﬂexicoil 45deg press rings (2), nearly new. £100/ pair. M Lister Tel 07761 322027 (Norfolk)

SPRING tine harrows, 9',

includes full set of points & spare set of points, one tine missing but 4 spare springs included, good condition, buyer collects. £400 ono no VAT. K Butters Tel 01507 466436 (Lincs)

Tel: 01263 711474 sales@eurotrackltd.com www.eurotrackltd.com

ur For all yoIED TRADE CLASSIFISING contact... ADVERT

ILSONersguide.co.uk SAM W @farm a h samant 4455 6 01473 9

MF7624 Dyna 6, 240hp, 2014,

Buy and sell online — www.farmads.co.uk

PARMITER Super Utah 12` hydraulic folding discs, scalloped discs at front plain at rear, little wear, rear towbar, plus hydraulic service. Photos available. £1,750+VAT ono. W Bryce Tel 07894 912341 (Suffolk)

MICHAEL Moore 4m trailed press, hyd fold, leading tines, hyd level paddles, cast rings double row, worn. £2,500+VAT. V & R Waspe & Sons Tel 01449 612607 (Suffolk) SUTON rolls, 24' manual folding, good condition for age. £1,500 ono. J Kiddy Tel 07860 452972 (Cambs) NUMBER of points & wearing parts for a Kverneland CTS, most with tungsten, on shelf since selling cultivator. Deal to be done. J Speirs Tel 07979 463480 (Beds)

trailed, hydraulic folding, vibroﬂex type tines, with rear packer. £6,000+VAT ono. E Clark Tel 07879 698807 (Norfolk)

TRACKS to ﬁt Case 9380 Quadtrac, used but in excellent condition, at least 70 & tracks left, lugs in good order, c/w 2 idler wheels. £4,500+VAT. P Wilson Tel 07971 878519/07494 689839 (Warks)

53-66485

FLEXICOIL 1.5m front press,

FARMFORCE 6m stubble buster,

£48,950+VAT

SIMBA Flatlift. £1,700+VAT. F Hardy Tel 07957 855180 (Notts)

2250hrs, Efﬁcient spec, 40kph box, owned since new, full dealer service history, low hours for year, 650 backs + 600 front tyres 60% worn, genuine reason for sale. Price reduced. £49,000+VAT. J Sills Tel 07398 716782 (Suffolk)

KUBOTA STV32, loader, low hours, rear 3 point linkage & PTO, turf tyres. £12,750+VAT. www. mktractors.com. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

WATERS nicki@fa 4456 01473 69

I uide.co.uk or NICKrm ersg uide

G Farmers

s.co.uk

armad

www.f

July 2019 www.farmads.co.uk 205

fg_class_july_19.indd 205

28/06/2019 12:02

B W M ACK (Machinery) LTD.

2012 New Holland CX6090 6 straw walker, smart sieve, yield monitor, chopper & chaff spreader, 800/65R32, 460/70R24 20’ Varifeed header c/w 1 side knife, hdr trailer, eng hrs 1,246 & threshing hrs 955

2015 NH CR9080 Elevation, 24” tracks, chopper & chaff spreader, Smart Steer, 30’ varifeed with trolley and side knives, engine hrs 1,176 & threshing hrs 984

Used Equipment

Demo 2018 NH T7.315 Auto Command, 50kph, Intellisteer, 650/60R34 & 710/75R42 Michelin, 0% finance & warranty, blue power, weight block not included, hrs 125

2011 NH CSX7080 20’ Varifeed header, c/w 2 knives, 710 tyres, straw chopper & chaff spreader, hrs 1,146

2018 NH T7.260 Auto Command, 50kph f/link, 2 mid & 4 r/spools, hi cap hyd pump, c/ control, e/mirrors LEDs, 600/65R28 & 650/75R38 Trelleborg, Intellisteer, 0% finance & warranty, hrs 625

2016 NH T7.200 Range Command, 50kph, Sidewinder II, large touch screen, Lynx front linkage, 480/70R28 & 580/70R38, hrs 4,809

2010 JF 955 trailed forage harvester, 1.8m pick up reel, hydraulic trailer hitch

2013 NH T4.95 tractor, Dual Command, power shuttle, electro link, 4wd, 2 spool valves, std PUH, passenger seat, hook ends hrs 4,250

CLAAS Axos CX 330 & loader hrs 2013, good condition ................................................................ £27,950 MERLO P40.7 telehandler, 2014, c/w 4t/7m, air con, boom suspension, air seat PUH ................... £32,000 SUTON ELCS 80 rehandling bucket, Merlo brackets ........................................................................... £975 SUTON EHDG 2300 muck fork & grab, Merlo brackets .................................................................... £1,500 AS 14t grain trailer, c/w sprung drawbar, hydraulic tailgate, rollover sheet, super single wheels, grain chute, good condition......................................................................................................... £7,300 KONGSKILDE 3m Delta cultivator, 7 leg, levelling discs, large crumbler roller, good condition .......... £3,250 HARDI Commander 3200L sprayer, c/w 24m booms, triplet nozzles, steering drawbar .................... £8,500 HARDI NK 600L sprayer, 8 or 6m boom, triplet nozzles, electric on/off, foam blob markers, very little used ........................................................................................................................... £2,350 COUSINS 5m double row Landpacker, good condition..................................................................... £6,500 COUSINS 2 leg heavy duty subsoiler, c/w depth wheels ................................................................. £1,200 KUHN DC401 4 leg subsoiler 3m with rear mounting brackets to fit rotary cultivator, good condition .. £4,000 BOMFORD Kestrel reach mower, 5m, Pro Trim head, good condition ............................................... £6,500 SPEARHEAD Twiga Pro 600 VFR reach mower, c/w new 1.6m head 6m reach with variable forward reach, good condition .................................................................................................. £16,000 VICON ROXL 2800 EDW weigh cell fertiliser spreader, Trimflow border speading, 12–48m spread width, good condition.................................................................................................................. £6,750 SULKY X36 fertiliser spreader, c/w Tribord 3D border spreading, 12–28m spread, good condition... £3,500 12 ROW liquid fertiliser to fit precision drill c/w Techneat 1000L front tank ........................................ £750 EX DEMO EINBOCK Vibrostar 4m spring tine cultivator,c/w levelling board, front roller, twin rear roller, hydraulic folding, very good condition ................................................................. £5,950 DOWDESWELL 90 rotavator ............................................................................................................ £2,400 VOGEL & NOOT 3m Terramix cultivator, c/w ring packer ................................................................... £3,900 KW Chopper feeder bucket c/w Merlo brackets ............................................................................... £3,250

Sales contacts

Paul Warner 07795 845308

0% FINANCE available on selected items • Finance is subject to Terms & Conditions

Contact Charles Moorman Office 01777 870111 www.plattsharris.co.uk or email us at: sales@plattsharris.co.uk

07970 805351

63820

2007 NH CX8060 SL straw chopper, 800/65R32 & 500/85R24, 20’ varifeed header & trailer, engine hrs 1,595 & threshing hrs 1,463

63850

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

New Machines

CLAAS Arion 650 CIS+ 50kph, Proactive front axle, air brakes ............................................................POA CLAAS Scorpion 741 Vari Power telehandler, 4.1t, 7m, demonstrator ...................................................POA JPM low loader trailer, 24’ long, loading skids, sprung drawbar, air & hydraulic brakes .................. £10,950 ALPEGO TR 46-280 front/rear, 2.8m flail mower, hydraulic offset headstock .................................... £6,500 ALPEGO TL 33-250 verge mower, 2.25m, hydraulic offset, wide angle PTO ..................................... £6,500 ALPEGO TL 33-200 verge mower, 2m, hydraulic offset, wide angle PTO .......................................... £6,200 ALPEGO RK 300 Rapido 3m power harrow c/w Twin Force quick fit tines packer roller, 3yr Driveline warranty...........................................................................................................................................POA ALPEGO/MORO Warrior 200 5 furrow (4+1) hyd variwidth plough hydraulic transport system ex demo.................................................................................................................................... £17,250 VICON RO-XL EDW 2800 weigh cell disc spreader ...............................................................................POA VICON RO-XL 2800 fertiliser spreader c/w Trimflow border spreading 12m to 48m spread width......... POA

Brian Cornwell 07899 965066

Barroway Drove, Downham Market, Norfolk PE38 0AL

Tel: 01366 324256/324311 Fax: 01366 324431 Out of hours: 07795 845308 • www.bwmack.co.uk

LANDPOWER

www.oliverlandpower.co.uk

AGRICULTURAL MACHINERY | EVENT VEHICLE HIRE | GROUNDCARE MACHINERY | COMMERCIAL VEHICLES | COUNTRY STORE Kings Langley Tel: 01923 265211 kingslangley@oliverlandpower.co.uk

McHALE R3100 MOWER CONDITIONER 2019, ex demo, 10 acres

£11,250

KUHN AXIS 40.1 2012, 30m, S6 vanes, 3000L hopper, weigh cells , PTO drive, Quantom control box

£5,500

Luton Tel: 01582 727111 luton@oliverlandpower.co.uk

Tingewick Tel: 01280 848494 tingewick@oliverlandpower.co.uk

McHALE 991BE TRAILED ROUND BALE WRAPPER 2014, auto RDS control box, 3 fill holders, auto cut & tie, 20,000 bales

NEW JCB 526-56 AGRI PLUS 40kph, trailer brakes, pick up hitch, 24” tyres, LED lights

NEW JCB 560-80 2018, Q-fit carriage, SRS, air seat, 460/80R26 tyres

NEW CHIEFTAIN 960L FUEL BOWSER UN approved, ADR approved, 100L Adblue, auto shut off nozzles, filters

BAILEY DUMP TRAILER 2014, 14.5t, Super Singles

NEW McCONNEL CONSOLIDATOR horizontal folding, 6.4m working width, 22” Cambridge breaker rings, 3 section

£7,950

£5,100

POA

£8,750

POA

Special Offer £9,950

All prices plus VAT 66244

206 www.farmads.co.uk July 2019

fg_class_july_19.indd 206

27/06/2019 11:37

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

LATEST USED STOCK www.chandlersfe.co.uk

KUBOTA 4WD DIESEL UTILITY VEHICLE

2015 SUMMER CASHBACK CAMPAIGN ON

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900 KUBO TA

KUBOTA DIESEL TRACTOR

£135,000.00

RG655C Sprayer

2015 SUMMER CASHBACK CAMPAIGN ON

KUBO TA

£105,000.00

£60,000.00

Bi speed turn for tight turns and minimal damage to surfaces

FROM

Twin wet-type disc brakes 2 speed rear PTO & 1 speed mid PTO Upto 34km/h travel speed- Fastest travel speed in it’s class

2013, 1500 Hrs, 175 HP Speed: 50Km/h B2050/B2350/B2650/B3150 Tyre size: 380/90R46 NEW 80% front tread 80% rear tread Easy to access bonnet and headlights for night-work Available with a panoramic, spacious factory fitted air-conditioned cab

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

FROM

KUBO TA

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

MT765C

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes

2009, 8033 Hrs, 360 HP Speed: 40Km/h B2050/B2350/B2650/B3150 Track width: 30 Track %: 60 PTO Speed:NEW 1000

Easy to access bonnet and headlights for night-work

KUBOTA 4WD DIESEL UTILITY VEHICLE

LESS THAN

HOURS

£285,000.00

KATANA 65 FORAGE FROM

716

TA KUBO

Bi speed turn for tight turns and minimal damage to surfaces

FROM

828

TA KUBO

2 speed rear PTO & 1 speed mid PTO Upto 34km/h travel speed- Fastest travel speed in it’s class

Bi speed turn for tight turns and minimal damage to surfaces

FROM

KUBOTA DIESEL TRACTOR

£120,000.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

939

TA KUBO

Twin wet-type disc brakes 2 speed rear PTO & 1 speed mid PTO Upto 34km/h travel speed- Fastest travel speed in it’s class

Bi speed turn for tight turns and minimal damage to surfaces

FROM

KUBO TA

Bi speed turn for tight turns and minimal damage to surfaces 2 speed rear PTO & 1 speed mid PTO

Available with a panoramic, spacious factory fitted air-conditioned cab

FROM

KUBO TA

FROM

KUBOTA 4WD DIESEL UTILITY VEHICLE

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40 TA KUBO

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

2018, 168 HP Front tyre size: 540/65R24 B2050/B2350/B2650/B3150 Rear tyre size: 460/70R24 NEW 95% front tread 95% rear tread

MF 1532H

FROM

KUBO TA

FROM

HOURS

Upto 34km/h travel speed- Fastest travel speed in it’s class

Easy to access bonnet and headlights for night-work

Available with a panoramic, spacious factory fitted air-conditioned cab

2017, 32 HP Front tyre size: 26 X 12.00-12 Turf B2050/B2350/B2650/B3150 Turf Rear tyre size: 13.6-16 NEW 100% front tread 100% rear tread

Bring more comfort and luxury to any task Powerful Kubota E-TVCS diesel engines: 21HP- 31HP Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

HOURS

£73,000.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP HST transmission

FROM

KUBO TA

Bring more comfort and luxury to any task Powerful Kubota E-TVCS diesel engines: 21HP- 31HP Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

2 speed rear PTO & 1 speed mid PTO

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

HST transmission

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP HST transmission

T150

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes 2 speed rear PTO & 1 speed mid PTO

HOURS

£28,500.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP HST transmission

TA KUBO

2 speed rear PTO & 1 speed mid PTO

2017, 1375 Hrs, 185 HP Front tyre size: 540/65R28 B2050/B2350/B2650/B3150 Rear tyre size: 650/60R38 80% front tread 80%NEW rear tread

FROM

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP HST transmission

2 speed rear PTO & 1 speed mid PTO

2017, 1100 Hrs, 185 HP Front tyre size: 540/65R28 B2050/B2350/B2650/B3150 Rear tyre size: 650/65R38 85% front tread 90%NEW rear tread

Easy to access bonnet and headlights for night-work

Available with a panoramic, spacious factory fitted air-conditioned cab

£23,950.00

Bring more comfort and luxury to any task

FROM

KUBO TA

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP Choices of Manual or HST transmissions Selectable 4WD Bi speed turn for tight turns and minimal damage to surfaces Mechanical/independent PTO, available with ROPS protection Easy to access bonnet and headlights for night-work Available with a panoramic, spacious factory fitted air-conditioned cab Fuel efficient, with noise and vibration kept to a minimum One piece hood for easy maintenance

£39,500.00

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task

FROM

KUBO TA

£55,000.00

Powerful Kubota Diesel Engine VHT PLUS2 (Variable Hydro Transmission) Responsive Hydrostatic Power Steering Independent Front & Semi-Independent Rear Suspension New Reinforced Steel Front Guard High Intensity Frame Structure Rollover Protective Structure (ROPS) Reliable Wet-type Disc Brake Optional Alloy Wheels Hydraulic Utility Valve Hydraulic Dumping Cargo Bed

FROM

£85,000.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP HST transmission

TA KUBO

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes 2 speed rear PTO & 1 speed mid PTO

Upto 34km/h travel speed- Fastest travel speed in it’s class

2016, 1918 Hrs, 245 HP Front tyre size: 480/70R30 B2050/B2350/B2650/B3150 Rear tyre size: 620/70R42 50% front tread 50%NEW rear tread

Easy to access bonnet and headlights for night-work

KUBO TA

Upto 34km/h travel speed- Fastest travel speed in it’s class

Available with a panoramic, spacious factory fitted air-conditioned cab

KUBOTA DIESEL TRACTOR

Easy to access bonnet and headlights for night-work Available with a panoramic, spacious factory fitted air-conditioned cab

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task

FROM

KUBO TA

Bring more comfort and luxury to any task

FROM

£42,500.00

KUBO TA

£62,750.00

CAT TH220B

CAT TH406C

CAT TH408D

MANITOU MLT735

MF TH.7038

2009, MA5 Premium Spec, Single (Consign A) Battery, Std Fan, 460/70R24, 5700 Hrs

2016, 3700Kg Lift,124HP, 6 Speed Powershift Transmission, 40KPH, 4WD, 460/70R24 (50%)

2017, 4000Kg Lift,145HP, AG Exclusive, 6 Speed Powershift Transmission, 40KPH, 4WD, 500/70R24

2012, 3500Kg Lift,120HP, 40KPH, 2200 Hours, Hydraulic Pinlock Headstock, Air Con, Boom Suspension

2018, 3800Kg Lift,130HP, Hydrostatic Transmission, Air Con, Boom Suspension, 40KPH, 4WD

£28,490.00 2018 (18) 3.2 TDCi WILDTRAK Auto Double Cab 4WD 4DR 8,849 Miles

£17,990.00

MITSUBISHI L200

2016 (16) 2.4 DI-D BARBARIAN Manual Double Cab 4WD 4DR 33,900 Miles

£21,490.00

NIAAN NAVARA

2016 (66) 2.3 DCi TEKNA Manual Double Cab 4WD 2Dr 13,000 Miles

Exceptional reliability, efficient performance

NEW

T234V

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes

Easy to access bonnet and headlights for night-work

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

£89,000.00

TA KUBO

Upto 34km/h travel speed- Fastest travel speed in it’s class

2006, 6369 Hrs, 160 HP Front tyre size: 420/85R28 B2050/B2350/B2650/B3150 Rear tyre size: 520/85R38 50% front tread 50%NEW rear tread

KUBO TA

Get ready for a whole new RTV experience.

NEW

FROM

Exceptional reliability, efficient performance

NEW

Available with a panoramic, spacious factory fitted air-conditioned cab

KUBOTA 4WD DIESEL UTILITY VEHICLE

KUBO TA

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

Upto 34km/h travel speed- Fastest travel speed in it’s class Easy to access bonnet and headlights for night-work

RTV-X900 Powerful Kubota Diesel Engine VHT PLUS2 (Variable Hydro Transmission) Responsive Hydrostatic Power Steering Independent Front & Semi-Independent Rear Suspension New Reinforced Steel Front Guard High Intensity Frame Structure Rollover Protective Structure (ROPS) Reliable Wet-type Disc Brake Optional Alloy Wheels Hydraulic Utility Valve Hydraulic Dumping Cargo Bed

NEW

FROM

T174EA

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes

Upto 34km/h travel speed- Fastest travel speed in it’s class

FROM

Get ready for a whole new RTV experience.

Exceptional reliability, efficient performance

FROM

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

KUBOTA 4WD DIESEL UTILITY VEHICLE

KUBO TA

LESS THAN

NEW

Bring more comfort and luxury to any task

Bi speed turn for tight turns and minimal damage to surfaces Mechanical/independent PTO, available with ROPS protection Easy to access bonnet and headlights for night-work Available with a panoramic, spacious factory fitted air-conditioned cab Fuel efficient, with noise and vibration kept to a minimum One piece hood for easy maintenance

1500

STW34/STW37/STW40

£77,000.00

KUBO TA

RTV-X900

NEW

KUBOTA DIESEL TRACTOR

TA KUBO

FROM

Exceptional reliability, efficient performance

FROM

Bring more comfort and luxury to any task

Get ready for a whole new RTV experience.

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40 NEW

KUBO TA

KUBOTA 4WD DIESEL UTILITY VEHICLE

Bring more comfort and luxury to any task

FORD RANGER

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

KUBOTA DIESEL TRACTOR

Available with a panoramic, spacious factory fitted air-conditioned cab

KUBOTA DIESEL TRACTOR

Exceptional reliability, efficient performance

Bi speed turn for tight turns and minimal damage to surfaces

2016, 1931 Hrs, 375 HP Front tyre size: 600/65R34 B2050/B2350/B2650/B3150 Rear tyre size: 710/75R42 50% front tread 60% rear treadNEW

KUBOTA DIESEL TRACTOR

RTV-X900 KUBO TA

Upto 34km/h travel speed- Fastest travel speed in it’s class

KUBO TA

FROM

Get ready for a whole new RTV experience.

NEW

FROM

2013, 3350 Hrs, 250 HP Front tyre size: 480/70R30 B2050/B2350/B2650/B3150 Rear tyre size: 620/70R42 NEW 70% front tread 80% rear tread

KUBOTA DIESEL TRACTOR

N174V

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes

FROM

2015, 3586 Hrs, 200 HP Front tyre size: 540/65R30 B2050/B2350/B2650/B3150 Rear tyre size: 650/65R42 50% front tread 50% rear treadNEW

KUBOTA DIESEL TRACTOR

2018, 239 Hrs, 165 HP Front tyre size: 480/70R28 B2050/B2350/B2650/B3150 Rear tyre size: 580/70R38 95% front tread 95%NEW rear tread

£107,500.00

TA KUBO

Twin wet-type disc brakes

Upto 34km/h travel speed- Fastest travel speed in it’s class Easy to access bonnet and headlights for night-work

Exceptional reliability, efficient performance

FROM

2 speed rear PTO & 1 speed mid PTO

Upto 34km/h travel speed- Fastest travel speed in it’s class Easy to access bonnet and headlights for night-work

LESS THAN

N154EV

NEW

MF 8737

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes

KUBOTA 4WD DIESEL UTILITY VEHICLE

TA KUBO

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

2 speed rear PTO & 1 speed mid PTO

1500

NEW

STW34/STW37/STW40 Exceptional reliability, efficient performance HST transmission

TA KUBO

Twin wet-type disc brakes

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

MF 7624

FROM

2 speed rear PTO & 1 speed mid PTO

RTV-X900

LESS THAN

£53,850.00

NEW

Bi speed turn for tight turns and minimal damage to surfaces

Twin wet-type disc brakes

Get ready for a whole new RTV experience.

KUBO TA

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

KUBO TA

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40 Exceptional reliability, efficient performance HST transmission

TA KUBO

NEW

FROM

2 speed rear PTO & 1 speed mid PTO

KUBOTA 4WD DIESEL UTILITY VEHICLE

1000 500

MF 7620

FROM

Get ready for a whole new RTV experience.

Twin wet-type disc brakes

RTV-X900

NEW

£56,750.00

NEW

Bi speed turn for tight turns and minimal damage to surfaces

FROM

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

KUBO TA

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40 Exceptional reliability, efficient performance HST transmission

TA KUBO

NEW

FROM

2 speed rear PTO & 1 speed mid PTO

KUBOTA DIESEL TRACTOR

2015 SUMMER CASHBACK CAMPAIGN ON

£13,950.00

NEW

Bi speed turn for tight turns and minimal damage to surfaces

RTV-X900 Get ready for a whole new RTV experience.

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40 Exceptional reliability, efficient performance HST transmission

MF 7370 BETA FROM

KUBO TA

£25,990.00

SSANGYON MUSSO 2018 (18) 2.1 RHINO Auto Double Cab 4WD 4DR 2,557 Miles

Ag ; Graham Peall: 07970 121109 Andrew Elms: 07860 464753 Pickup’s ; Richard Young / Adam Swales: 01476 590077

USED VALTRA

£ P.O.A

NEW

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900

NEW

FROM

Get ready for a whole new RTV experience.

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

£16,990.00

TOYOTA HILUX

2015 (65) 3.0 D-4D INVINCIBLE Auto Double Cab 4WD 4DR 55,945 Miles

TELEHANDLERS

HOURS

KUBO TA

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900

NEW

FROM

Get ready for a whole new RTV experience.

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

Available with a panoramic, spacious factory fitted air-conditioned cab

Bring more comfort and luxury to any task

USED PICK-UPS

LESS THAN

KUBO TA

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900 KUBO TA

FROM

Get ready for a whole new RTV experience.

NEW

FROM

Bring more comfort and luxury to any task

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900

1000 500

KUBO TA

Easy to access bonnet and headlights for night-work

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

Upto 34km/h travel speed- Fastest travel speed in it’s class

USED MASSEY

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

2015 SUMMER CASHBACK CAMPAIGN ON

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task

Twin wet-type disc brakes

2017, 175 Hrs, 650 HP 2018, 650 Hrs, 170 HP 2016, 2712 Hrs, 280 HP 2014, 5620 Hrs, 365 HP 2016, 4850 Hrs, 400 HP Front tyre size: 710/70R38 Front tyre size: 480/65R28 Front tyre size: 600/70R30 Front tyre size: 480/70R34 Front tyre size: 650/65R34 Rear tyre size: 600/65R28B2050/B2350/B2650/B3150 Rear tyre size: 520/70R38B2050/B2350/B2650/B3150 Rear tyre size: 710/70R42B2050/B2350/B2650/B3150 Rear tyre size: 620/70R42B2050/B2350/B2650/B3150 Rear tyre size: 710/75R42B2050/B2350/B2650/B3150 NEW front tread 95% rear tread NEW front tread 60% rear tread NEW front tread 70% rear tread NEW front tread 50% rear tread NEW 95% front tread 95% rear tread 90% 60% 70% 40% Easy to access bonnet and headlights for night-work

Bring more comfort and luxury to any task

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

2 speed rear PTO & 1 speed mid PTO Upto 34km/h travel speed- Fastest travel speed in it’s class

Easy to access bonnet and headlights for night-work

KUBOTA DIESEL TRACTOR

KUBO TA

HST transmission

TA KUBO

Twin wet-type disc brakes

Easy to access bonnet and headlights for night-work

KUBOTA DIESEL TRACTOR

NEW

Exceptional reliability, efficient performance

NEW

HST transmission

Easy to access bonnet and headlights for night-work

KUBOTA DIESEL TRACTOR

Easy to access bonnet and headlights for night-work Available with a panoramic, spacious factory fitted air-conditioned cab

Get ready for a whole new RTV experience.

NEW

FROM

Exceptional reliability, efficient performance

NEW FROM

Upto 34km/h travel speed- Fastest travel speed in it’s class

STW34/STW37/STW40

£96,000.00

Bi speed turn for tight turns and minimal damage to surfaces

Twin wet-type disc brakes 2 speed rear PTO & 1 speed mid PTO

KUBOTA 4WD DIESEL UTILITY VEHICLE

KUBOTA DIESEL TRACTOR

936

TA KUBO

2 speed rear PTO & 1 speed mid PTO Upto 34km/h travel speed- Fastest travel speed in it’s class

HST transmission Bi speed turn for tight turns and minimal damage to surfaces

FROM

RTV-X900 KUBO TA

STW34/STW37/STW40

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

Twin wet-type disc brakes

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

Get ready for a whole new RTV experience.

NEW

HST transmission

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

Exceptional reliability, efficient performance

NEW

Exceptional reliability, efficient performance

B2050/B2350/B2650/B3150

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

FROM

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

HST transmission

TA KUBO

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task

KUBO TA

KUBOTA 4WD DIESEL UTILITY VEHICLE

£115,500.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

Twin wet-type disc brakes

KUBOTA DIESEL TRACTOR

RTV-X900 KUBO TA

Exceptional reliability, efficient performance

NEW

Upto 34km/h travel speed- Fastest travel speed in it’s class Easy to access bonnet and headlights for night-work

NEW

FROM

Twin wet-type disc brakes 2 speed rear PTO & 1 speed mid PTO

2015, 3750 Hrs, 439 HP Speed: 40Km/h B2050/B2350/B2650/B3150 Track width: 25 Track %: 90 PTO Speed:NEW 1000

Get ready for a whole new RTV experience.

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

Bi speed turn for tight turns and minimal damage to surfaces

NEW

HST transmission

MT775E

FROM

STW34/STW37/STW40

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

TA KUBO

Available with a panoramic, spacious factory fitted air-conditioned cab

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

KUBOTA 4WD DIESEL UTILITY VEHICLE

KUBO TA

£111,500.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP HST transmission

KUBO TA

RTV-X900

NEW

FROM

Exceptional reliability, efficient performance

NEW

FROM

KUBO TA

Buy and sell online — www.farmads.co.uk

1500 1000

KUBOTA DIESEL TRACTOR

2015, 4969 Hrs, 439 HP Speed: 40Km/h B2050/B2350/B2650/B3150 Track width: 25 Track %: 90 PTO Speed:NEW 1000

Get ready for a whole new RTV experience.

STW34/STW37/STW40

Upto 34km/h travel speed- Fastest travel speed in it’s class

RTV-X900 KUBO TA

Twin wet-type disc brakes

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

FROM

Get ready for a whole new RTV experience.

NEW

FROM

KUBOTA DIESEL TRACTOR

£129,750.00

Exceptional reliability, efficient performance

NEW

2 speed rear PTO & 1 speed mid PTO

Bring more comfort and luxury to any task

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

Get ready for a whole new RTV experience.

NEW

FROM

MT775E

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task

KUBO TA

STW34/STW37/STW40

HST transmission Bi speed turn for tight turns and minimal damage to surfaces

Available with a panoramic, spacious factory fitted air-conditioned cab

KUBOTA DIESEL TRACTOR

KUBO TA

KUBOTA DIESEL TRACTOR

£122,750.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

TA KUBO

Easy to access bonnet and headlights for night-work

Available with a panoramic, spacious factory fitted air-conditioned cab

RTV-X900

FROM

2 speed rear PTO & 1 speed mid PTO Upto 34km/h travel speed- Fastest travel speed in it’s class

NEW

FROM

Exceptional reliability, efficient performance

NEW

HST transmission

TA KUBO

FROM

Get ready for a whole new RTV experience.

STW34/STW37/STW40

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

NEW

HST transmission

RG365

KUBO TA

Exceptional reliability, efficient performance

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

TA KUBO

NEW

FROM

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

Exceptional reliability, efficient performance

NEW

RTV-X900

Get ready for a whole new RTV experience.

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

FROM

2014, 4200 Hrs Air Con, Air Seat, 36m Booms Tyre size: 710/60R38 70% front tread 70% rear tread

NEW

FROM

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900

Get ready for a whole new RTV experience.

2015 SUMMER CASHBACK CAMPAIGN ON

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900

Get ready for a whole new RTV experience.

NEW

FROM

2015 SUMMER CASHBACK CAMPAIGN ON

USED CHALLENGER

2015 SUMMER CASHBACK CAMPAIGN ON

USED FENDT

2015 SUMMER CASHBACK CAMPAIGN ON

Errors and omissions excepted. All prices +VAT

July 2019 www.farmads.co.uk 207

fg_class_july_19.indd 207

27/06/2019 11:39

2012 John Deere 6150R Tractor

ISEKI TM3265 compact tractor,

2017, 85hrs, MX C2 loader & bucket on joystick, front weights, transport box, mid mount mower, rear PTO, 3 spools, drawbar, fully heated cab, awesome machine from a large private house, may part-ex. C Johnson Tel 07979 851995 (W Yorks)

strong 100hp 4wd, tyres round just low on tread, it all works in a fashion, brakes need attention, suspect leak in slave cylinder, cab has all the glass bar one. £5,000+VAT. J Hatton Tel 07803 721236 (Essex)

NEW STAINLESS STEEL EXHAUST SYSTEMS

WHEEL GUARD VARIWEIGHT

1000kg centre weight with large central toolbox, optional vari-pods either side from 100kgs to 500kgs

longer lasting & reduced noise levels

4963hrs, 4 spool valves, front weights, 45% tracks, 25" tracks, air conditioning, in excellent condition. £24,000. S Garford Tel 07921 777239 (Cambs)

MF 7716

01263 711474 sales@eurotrackltd.com www.eurotrackltd.com

01377 259140 www.agriweld.co.uk

JOHN Deere 6320 front linkage & PTO, had little use, vgc. £1,750. M Lister Tel 07761 322027 (Norfolk) Feb 2017, Dyna VT, 1930hrs, 50kph, f/linkage, f/& cab susp, a/brakes, multi control lever, Data 4, 4 spools, mid mt for f/linkage, autoguide ready, 600/65/38 & 480/65/28 Trelleborg tyres, 100% tread (on rowcrops since new) immaculate condition

53-62690

53-66509

BENNETT Engineering pick up hitch, from Fendt 724 (2012) tractor, was exported & they didn't want hitch, so all in gwo. GW Harrold & Partners Tel 07836 751076 (Norfolk)

£1,300+carriage+VAT

sales@agriweld.co.uk

FENDT reversing camera, only for models pre-2008, to work with the old style screens. GW Harrold & Partners Tel 07836 751076 (Norfolk)

TM70, was in good condition, unfortunately someone helped themselves to the manifold, starter & lift pump, tracks very good & steering, ﬁtted cab, PTO & spool valve, spares or repairs. £1,000. A Kerfoot Tel 07539 933777 (Lincs)

to ﬁt AGCO Challenger MT700 A/B Series & Cat/Claas Challenger 35-95

1999 Claas Challenger 55,

NEW Holland front weights, 18 x 45kg wafer weight block, to suit New Holland curved weight holder. T Golding Tel 07708 244506 (Essex)

53-66536

www.tvmachinery.com Tel Mike 07764 835562(T)

RENAULT 103.14, 10k hrs,

JCB front weight. GW Harrold & Partners Tel 07836 751076 (Norfolk)

y an r er le M the ng ilab o lle a a v Chrts a pa

Claas Axion 950 tractor 2015

NH T6.175 c/w Q66 loader,

2014, 6000hrs, 50kph, front & cab suspension, 3 spools. £37,500. L Rich Tel 07774 112211 (Glos)

LLANSILIN TRACTORS LTD AGRICULTURAL ENGINEERS

01691 791460 JOHN Deere front weight

2011 Challenger MT765C,

4035hrs on the clock, tracks replaced Autumn 2017 & are still 90% good, 4 spools & 3pt linkage, guidance ready & in overall very good condition. £85,000. S Entwistle Tel 07940 102304 (Northants)

CASE Magnum 310, 2008, 40k box, front axle suspension, front weights, also has PUH ﬁtted, 5228hrs, in very good condition. £43,000+VAT ono. N Gaunt Tel 07999 855169 (Derbys)

CASE Magnum Cat 3 top link, hook end, brand new GW Harrold & Partners Tel 07836 751076 (Norfolk)

www.lfmachinery.co.uk

07790 023538 MF7715 Dyna 6, 50k, 2016,

NEW Holland 810kg front weight, 18x45kg wafer weights, ﬁt tractor front weight frame. £750. T Carr Tel 07514 015654 (Essex)

NEW Holland T7-200 4wd tractor, 2014, Auto Command 50kph gearbox, 3100hrs, Michelin 650/65-R38 60%, 540/65-R28 55%, fully loaded with extras, in superb condition, owned from new, supplied & serviced by TH White. £49,995+VAT. J Furness Tel 07973 843230 (Glos)

£79,500 50k, 410hp, CVT, RTK GPS steering, 4250hrs

extension frame/box, ﬁts 20 & 30 Series, c/w bolts & spacers. £350+VAT ono. J Nott Tel 07957 146325 (Norfolk)

53-66551

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

POA Powerquad, 40kph, 650x38 rears, 540x28 fronts, 4700hrs, tidy tractor

JOHN Deere 7530 Premium, 2011, 8075hrs, Autopower, 50k, auto steer ready, f/linkage & PTO, 710/70-38 @70% 540/65-30 @70% pass seat, climate control, EGR valve, injectors, turbo replaced, 4 new spools, v well maintained/ serviced. £38,750. D Skelton Tel 01476 530249/07810 646660 (Lincs)

53-66461

TRACTORS (cont)

front axle & cab suspension, air brakes, 2 electric & 1 manual spools, front weights, 650/65R38 rears, 540/65R38 fronts, 1150hrs, just had 1200hr service, excellent condition, 2yrs warranty left. £56,500. C Allen Tel 07850 359747 (Cambs)

JOHN Deere front weight block, 110kg, vgc. £50+VAT ono. J Nott Tel 07957 146325 (Norfolk)

JD6175R 50k Autopower, f/ links & PTO, autotrac with dome & activation, 10” display, 4600 processor, 4 electric spools, very high spec tractor with a full John Deere service history, 3230hrs, registered 01.09.2015, 65 plate. POA. www.mktractors.com. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

FENDT 820 rear lift arm rams

(2), c/w all bushes. £120 the pair. M Hitchcock Tel 07900 264044 (Suffolk)

CONCRETE tractor weight for T20 or MF35, used in connection with loader, sold as seen. £120+VAT. J Hurd Tel 01985 840260 (Wilts)

KIOTI CK35 Hydro, turf tyres, roll bar, 1060hrs. £7,450+VAT. www. mktractors.com. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

CASE 895XL Super 4wd, pick up hitch, 2 double acting spools, 540 & 1000 PTO speeds, air conditioning, 5150hrs, genuine throughout, call for more info. £10,250 no VAT. A English Tel 07722 009505 (Norfolk)

208 www.farmads.co.uk July 2019

fg_class_july_19.indd 208

28/06/2019 12:11

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

MACHINERY SUMMER SALE SPECIAL £23,750

41050361 MERLO P40.7 2011, 4789hrs, Hydro, 40K, boom sus, air seat, 405/70/24 20%, forks, A/C, 3rd service

11042845 FARM GEP 2600 2004, 2600Ltr, trailed sprayer, 24metre 4 sections, 250lpm piston pump, Triplet nozzle SPARES OR REPAIR

£1,495

11054060 IFOR DP120G 12’ cattle trailer with sheep decks, twin axle

£5,950

31055173 LOW LOADER 25’ low loader, hyd ramps, oil brakes, wooden floor, converted lorry body

£7,250

31048577 HORSTINE TMA4 2016, 12mtr, trailed, Avadex/ slug applicator, petrol engine, 380ltr tank, electric controls

£8,950

11053336 BAILEY19T 19T Gross Low loader (will take 15T load) Air/hyd brakes, hyd ramps, sprung drawbar, 435/55/19.5 tyres, 10 stud

£5,950

31055174 WESTERN 11T 2007, 11T grain trailer, silage sides, hyd rear door, hyd brakes (fitted with air brakes not currently working), rear

£114,950

51045541 JD 7780i 2014, 1421/2301hrs, 4WD, harvest monitor, ProDrive, 40K, AHC, autolube, Kernelstar, 800/65R32, 630C grass head-

£11,950

£7,950

11047685 KEENAN EC56 2015, Feeder wagon, single axle, 17M3, Pacer weigh system

11050331 DALBO TRIMAX 2018, EX DEMO, 3mtr stubble cultivator, 3 rows tines, rear packer

£62,450

£5,750

41054454 JD 750A 2016, 6mtr direct drill, ISOBUS, markers, Gutler wheels, recent new metal

11056258 CHERRY CATTLE 21’ cattle trailer, hyd ramp, twin axle, 2002, metal floor

£15,950

11055465 KANE 20T Hydraulic rear door, 11.5m cubic metre capacity, sprung draw bar, air & hydraulic brakes, hardox body, leaf

01844 278843 sales@farol.co.uk www.farol.co.uk

£37,950

21054682 BATEMAN RB55 2006, 5000ltr, 12/24/36mtr, 8256hrs, 710R30, 420/85R30, A/C, X20 + receiver, hydro, 4 wheel steer, twin line

Buy and sell online — www.farmads.co.uk

£2,950

£74,950

41048347 JD 7750 2012, 2221/3707 hrs, ProDrive, 40K, Greenstar, 630C header, KP

£24,495

31048408 ROLLAND RF 5514 NEW V21 ESP, muck spreader, slurry door, 620 75R26 mud guards, de mount slats

Our Milton Common OX9 2NZ Yard Weights NOT included. Prices each,exclude VAT ex yard. Whilst stocks last. Correct 13/6/19. E & OE

July 2019 www.farmads.co.uk 209

fg_class_july_19.indd 209

27/06/2019 11:42

GRUNDY

Five Mile Lane, Washingborough, Lincs 01522 790720

AGRICULTURAL

Visit our new website for up-to-date in-stock machinery for sale

wwww.stalhameng.co.uk NEW CASE TRACTORS IN STOCK

Used Weidemann T4512 telescopic handler, 2015, 40hp, 2240hrs, hydrostatic transmission, lift height 4.5m, lift capacity 1200kg, new tyres, pallet tines, serviced, vgo

New Weidemann T6027 Telescopic handler, 75hp, 30K, hydrostatic transmission, 3 position steering, lift height 6m, lift capacity 2700kg, pallet tines, 3yr warranty

New Weidemann T5522 Telescopic handler, 50hp, 30K, hydrostatic transmission, 3 position, steering, lift height 5.5m, lift capacity 2200, pallet tines, 3yrs warranty

Deutz 7250 TTV Warrior 2015 (65 plate), 263hp 4165hrs, Vario, 50k, f/links, air cab, air brakes, auto steer ready, Isobus, iMonitor, 5 spools, 650/65R42 50%, 540/65R34 25%

Used Amazone ZA M 2200 spreader, 2004, 24/36m discs, L/H border limiter, hopper cover, lights

Ex demo Dieci Agri Plus 40.7 VS 2018, 148hrs, 152hp, FPT engine, 4000kg lift capacity, 7m lift height, 40k, vario transmission, air con, pick up hitch, 0% ﬁnance, 2yrs warranty

£21,500

CASE Maxxum 150hp CASE Puma 165hp CVX transmission CASE Puma 175hp CVX transmission CASE Puma 200hp CVX transmission Demos available on various models 2018 CASE Puma 175hp CVX tractor, front linkage, front PTO, GPS ready, tyres 650/68R42 – 600/65R38, 520hrs, 3yr warranty 3,000hrs, 0% ﬁnance ...........................£88,000

NEW & SECONDHAND JCB 4000 Series FASTRACS available for DEMO & IN STOCK JCB Fastracs available Ex-demo & Ex-stock 4220

POA

£1,650

POA

£59,995

All prices + VAT

Sold with service and warranty agreements

We are delighted to announce our appointment as

USED JCB FASTRACS – FASTRAC SPECIALISTS FOR 26 YEARS 2014 JCB 2170 Fastrac, 4 wheel steer, 540/65R30 tyres ........................................................£48,000 2010 JCB 3230 Fastrac, front linkage, recon transmission, 540/65/34 tyres............................£48,000 2013 JCB 3230 Fastrac, front linkage, 540/65/34 tyres ...........................................................£45,000 2014 JCB 4220 Fastrac, front linkage, 600/70R30 tyres new ..................................................£75,000 2016 JCB 4220 Fastrac, front 540/65R30 rear 600/65R30 .....................................................£80,000 2017 JCB 8330 Fastrac, front linkage, 710 tyres, 860hrs ......................................................£138,000

We source low hour ex-demo Fastracs & Loadalls with warranty, backed by genuine JCB parts & service

David Grundy 07879 698473

Karl Gladding 07500 448243

66391

dealers for Mid Lincolnshire

SECONDHAND LOADALLS

LLANSILIN TRACTORS LTD

2013 JCB 541-70 Agri Super, 40k, PUH, 500/24 tyres ............................................................£35,000 2014 JCB 541-70 Agri Super, 40k, PUH, 500/24 tyres ............................................................£42,000 2016 JCB 541-70 Agri Super, 40k, PUH, 500/24 tyres ............................................................£52,000 2018 JCB 541-70 Agri Super, 40k, PUH, 500/70R24 tyres, 650hrs .........................................£69,000 2017 JCB 536-70 Agri Super, 40k, PUH, 460/70R24 tyres, 842hrs .........................................£60,000 All machines fully serviced and sold with warranty

AGRICULTURAL ENGINEERS

01691 791460

Full range of McHale machines in stock

• Front & rear mowers • Round balers • Fusion bale wrapper • Orbital trailed round bale wrapper • Trailed & mounted round bale wrappers • Demo machines available

New Case IH large square balers • Model LB434XL 120x90 bales – in stock Sold with warranty & ﬁnance 1+2@0% 50% retail price

SECONDHAND ROUND & SQUARE BALERS 2017 New Holland 1290 Plus, tandem axle, operated package, LED lights, bale ejector, bale count 5,554...............................................POA 2010 New Holland BB90-80 baler, single axle, 710/40/22.5 new tyres, bale count approx 56,000. ..............................................£28,500 2015 McHale V660 round baler, ﬁtted chopping device, braked axle, serviced ready for work ...........................................................£24,000 2015 McHale V660 round baler, ﬁtted chopping device, braked axle ......................................................................................£18,500 Lely/Welger RP545 round baler, checked over, vgc ..........................£16,000 Welger RP445 round baler, good order ............................................£14,500

MF 7718S Dyna VT, 2019, 50hrs, front linkage, full susp, 4 spools, Data 4

MF 6499 2006, Tier 3, 5500hrs, 50kph, front & cab susp, front links

MF 6714S 2017, 1100hrs, Dyna 6, 50kph, air brakes, front links, front susp, CCLS

MF 6497 2007, Tier 3, 5200hrs, 50kph, front & cab susp, front links

MF 7716 2017, Dyna VT, 50kph, front links, air brakes, 4 spools, autoguide ready MF 7620 2013, Dyna 6, Exclusive, 50kph, 4100hrs MF 6616 2013, Dyna VT, Exclusive, 2600hrs, front linkage

BAILEY

TRAILERS

Telephone: 01692 580513 MOBILES: TONY NICHOLSON 07770 811950 DAVID NICHOLSON 07885 269499 KEVIN CHUBBOCK 07887 478530 EMAIL: agsales@stalhameng.co.uk

63877

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

The Green, Stalham, Norwich NR12 9QG

MF 6280 2003, 6600hrs, Dynashift, air con, very nice condition MF 6480 2007, 4700hrs, front & cab susp, CCLS, Data 3 MF 6480 2005, Dynashift, 5300hrs, front & cab susp, CCLS, 90% tyres MF 6480 2005, Dyna 6, 8000hrs, front & cab susp, CCLS, 3 spools

MF 5712 SL MF 6485 2016, 1500hrs, front susp, 540/38 & 2006, Dynashift, full susp, tidy 440/28 tyres condition MF 5455 MF 5475 2008, 2200hrs, Privilege spec, Dyna 4, 2010, 6500hrs, front susp, snoopy bonnet CCLS MF 7626 2013, 4400hrs, 50kph, front & cab susp, air brakes, front links

Case MXM 175 2004 18 Speed, cab susp, front linkage, 7700hrs, excellent condition

MF 8690 JCB 2150 Fastrac 2012, 3200hrs, front linkage, 50kph, 2001, Smoothshift, 7400hrs, 70% tyres, excellent condition good tyres 62674

email: llansilintractors@hotmail.co.uk

For a full list of our stock please go to www.llansilintractors.co.uk

210 www.farmads.co.uk July 2019

fg_class_july_19.indd 210

27/06/2019 11:46

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

Renault 113 12 4x2

NEW Holland T8-390, 4wd, 50kph powershift gearbox, cab & front suspension, 4 electronic spools, RTK GPS guidance, climate control, leather seat, 2800hrs, in excellent condition, tyres 800/70R38 50%, 600/70-R30 45%. £62,750+VAT. J Furness Tel 07973 843230 (Glos)

2014 John Deere 6150M Tractor

£3,800+VAT

TWO 1t Fendt 900 Series rear

wheel weights, surplus to requirements. GW Harrold & Partners Tel 07836 751076 (Norfolk)

53-66432

1982, 120hp, 2 owners been on farm for 9 years

Andrew H Gemmill 07767 891328 01702 202930

HUNTON Legg 14t grain trailer,

POA

2013 Case LRZ100

WEIGHT block, 3pt linkage ﬁt, ideal for a loader tractor. £140. R Sinkler Tel 01377 270251 (E Yorks)

53-66535

Powerquad, 40kph, TLS, 650x38 rears, 540x28 fronts, weights, 2593hrs, excellent condition

www.tvmachinery.com Tel Mike 07764 835562(T)

LEGG tandem axle dump trailer, carry 10t? front lower corners been repaired - ideal muck, beet, soil etc. GDO Howell Tel 07903 089391 & 01728 723683(T) (Suffolk)

FORD 6640 2wd, 6450hrs,

FRONT weight box made around crawler front weight, will ﬁt front linkage, around 2t with hinged lid, Fendt grey. £1,500+VAT ono. E Clark Tel 07879 698807 (Norfolk) JOHN Deere 7930, 2011, 40k Autoquad, front linkage, 710/42r 600/30f 90% Michelin tyres, only 2650hrs, Greenstar ready, immaculate condition. POA. R Mansﬁeld Tel 07801 864112 (Bucks)

Dynashift, 2003, 6600hrs, CCLS, 90% tyres, excellent condition

LLANSILIN TRACTORS LTD AGRICULTURAL ENGINEERS

01691 791460

good tyres, PUH & drawbar, f/w Bomford B577 ﬂail hedger, electric control. Tractor only £7,500 or complete outﬁt £9,950. S Parrish Tel 07785 502436/01992 572511 (Essex)

JOHN Deere 6150M, 2016, Autoquad, 40K, John Deere 643R loader, TLS, full JD service history, 1050hrs. POA. R Parris Tel 07702 501272 (Devon)

50kph, Autopower, full spec, 4600 screen, Autotrac, cab/ front suspension, leather, passenger seat, 4ECVs, PUH, Cat 4 linkage, 650/60R34 front tyres, 900/60R42 rear, Axiobibs all round, rear wheel weights. £105,000+VAT. M Houldcroft Tel 07496 387714 (Rutland)

www.jmurrell.co.uk

Tel : 01493 750999

STRAW trailer, 35' single axle artic, with bogie, good ﬂoor. £1,000. D Murrell Tel 07850 724139 (Norfolk)

Bailey Drop Deck 8t Low Loader

POA 2018, c/w rear steer axle, 19’ x 8’ chequerplate floor, loading ramps, LED lights, demo model

6455hrs, Michelin tyres 710 80%+, front linkage, mostly used on rowcrops, excellent condition. POA. A Pepper Tel 07831 119402/01353 722324 (Cambs)

Clive Dibden 07831 484365 Hampshire JCB 900kg front linkage weight

block, with top link bracket. £950. L Baker Tel 07989 985270 (Northants)

with GPS Autosteer, 1980hrs, fronts BKT 600/70R30 100%, rears Goodyear Optitrac 710/R42 50%, 5 spools, air brakes, 50K gearbox, standard drawbar, cab, c/w all leather seats, excellent condition. £68,000. S Micklethwait Tel 07790 982702 (Worcs)

SMALL plant trailer, 6’ x 10’ bed (1.8 x 3.1m), tow eye. £350+VAT. H Pearce Tel 07947 344310 (Essex)

BAILEY 8t corn/root trailer, c/w corn chute, vgc. K Hodgson Tel 07721 562849/01507 568329 (Lincs) FLAT trailer, with ramps, single axle, ring hitch. £400. N Bailey Tel 01206 230511 (Essex)

trailers, excellent condition, hydraulic tailboard, sprung drawbar, super single tyres, can be sold separately. £15,750+VAT. N Cowell Tel 07887 480579 (Essex)

MONTRACON step frame trailer, surplus to requirements. £1,895+VAT ono. R Hopkinson Tel 07976 424263 (Lincs) ARTIC trailer with dolly, good wooden ﬂoor, hydraulic brakes, lights, 40' long. £1,200. J Bird Tel 07973 346801/0116 259 6819 (Leics)

TRAILERS

315 Magnum Case IH, 2012,

JOHN Deere 6920S, 7171hrs, 40k, front suspension. £28,000. C Gilbert Tel 07506 055429 (Lincs)

WILCOX tipper bulker, 2010, in incredible condition, barely been used, worth a look, digital weigher Serial No. 10W10355/Model No FSUF. SA. GW Harrold & Partners Tel 07836 751076 (Norfolk)

PAIR of AS Marston 14t grain

FENDT 718 TMS, 57 reg,

JOHN Deere 8370R, 3107hrs,

Commercial axle, super singles, VGC

54-66495

www.jmurrell.co.uk Tel : 01493 750999

53-62691

53-66533

fore end loader boom, Euro head

Bunning 6t tipping trailer

£1,600 No VAT

MF 6280 £2,000

PETTIT 3t tipping trailer, wooden ﬂoor & sides. £375+VAT. F Howell & Sons Tel 01760 440297/07798 668239 (Norfolk)

Buy and sell online — www.farmads.co.uk

KUBOTA STV32HST compact tractor, turf tyres, hydro, with cab & loader. £11,950+VAT. www. mktractors.com. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

JOHN Deere 7930, 2009, 50k Autopower, 6500hrs 650/85/38r 600/30f all 50%, front linkage, Greenstar ready, excellent condition. POA. R Mansﬁeld Tel 07801 864112 (Bucks) FRONT weight frame, takes IH weights. £65 ono. G Richmond Tel 01502 730387 (Suffolk)

excellent condition, ﬂotations 90%, rollover sheet, hyd tailgate, piped for oil & air brakes, front window, really smart strong trailer. £12,495 ono. P Watson Tel 07889 081476 (Suffolk)

54-66537

TRACTORS (cont)

AS Marston 10t dropside grain trailer. £4,000. L Taylor Tel 01945 772549/07780 664119 (Cambs)

RICHARD Western SF12 grain trailer, 2010, roll sheet, sprung drawbar, hydraulic rear door, c/w grain hatch, hyd brakes, mudguards, on 10 stud commercial axles & super singles, only ever used for grain & in vgc. £10,250+VAT ono. M Fisher Tel 07970 894244 (Cambs)

12-TON low loader trailer with hydraulic folding & 10t winch, 25' long, 8' wide & 3' high, nice solid trailer, everything works well & is ready to go to work. £4,995. J Masiha Tel 07707 713345 (Essex)

July 2019 www.farmads.co.uk 211

fg_class_july_19.indd 211

28/06/2019 12:24

Hallmark Tractors HALLMARK Russells (Kirbymoorside) Ltd TRACTORS

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

TRACTORS

NEW HOLLAND T7.315 HD, 2018, 50kph Auto Command, 1000hrs, f/linkage c/w MMV, 710/70R42 600/70R30, RTK receiver & nav controller, f/PTO fitted ............................. £103,000 NEW HOLLAND T7.315 HD, 2017, 50kph, air brakes, Auto Command, 710/70R42 600/70R30, full suspension, 4 spools, 3yr 3000hr Platinum cover, electric mirrors .......... £95,000 NEW HOLLAND T7.270 Auto Command Blue Power, 2018, 710/75 R38 600/65R28, 2 mid mount valves, f/links, PTO, 4 spools, Isobus & Power Beyond, 1500hrs, 16 LEDs ......... £95,000 NEW HOLLAND T7.270 Auto Command Blue Power, 2018, 50kph Eco, 200amp alternator, exhaust brake, Class 4R axle, 170L pump, ISO Power Beyond, joystick, 3MMV, 4 remotes, 110mm cyl, f/links & PTO, Cab Pack 3, Climate Pack 2, high headlamps, 16 LED, elec mirrors, 710/70R38 600/65R28 Trelle, ext air line, 1500hrs ............................. £95,000 NEW HOLLAND T7.245 Auto Command, 1250hrs, f/linkage, 2 MMV, 2017, 650/65R42 Michelin, Trimble 750 steering GPS ................................................................................. £87,950 NEW HOLLAND T7.270 Auto Command Blue Power, 2016, 2800hrs, f/linkage & PTO with MMV, leather heated seat, 710/70R38 600/65R28 .................................................... £79,000 NEW HOLLAND T7.225, Auto Command, 2018, 710/70R38 600/65R28, AG ready, 2 mid mounts, f/links & PTO, cab pack 2, climate control, electric mirrors, 1500hrs ............. £78,000 NEW HOLLAND T7.225 Auto Command, 2018, 650/65R42540/65R30, 2 mid mounts, f/links & PTO, AG ready, Cab Pack 2, 16 LEDs, approx 1500hrs, ISOBUS, Power Beyond.................................................................. £77,000 NEW HOLLAND T7.225 Auto Command, 2018, 650/65R42540/65R30, 2 mid mounts, f/links& PTO, AG ready, Cab Pack 2, 16LEDs, approx 1500hrs, Isobus, Power Beyond ............................................................................ £77,000 NEW HOLLAND T7.225 Auto Command, 2018, 650/65R42540/65R30, 2 mid mounts, f/links& PTO, AG ready, cab pack 2, 16 LEDs, approx 1500hrs, Isobus, Power Beyond.................................................................. £77,000 NEW HOLLAND T7.210 A/C, 50kph, 2018, 2100hrs, exhaust brake, fully suspended with f/brakes, AG ready fast steer, f/linkage, joystick, 2 MMV with f/services, 4 r/remotes, 100mm lift rams + hyd top link dynamic seat, leather steering wheel, carpet, HTS2, high mount headlamps, 12 LEDs elec mirrors, twin beacons, 650/65R38 540/65R28 Michelin, Isobus Class 3 .................................................. £72,000 NEW HOLLAND T7.210 Auto Command, 2017, 50kph, 1170hrs, f/linkage, 650/65R38 Trelleborg ......................... £69,950 NEW HOLLAND T7.225 Auto Command, 2017, f/links & PTO, 12 LEDs, cab pack 2, Isobus, Power Beyond slice, 160Lpm hyd pump, 650/65R42 540/65R30 @85%, approx 2850hrs ............................................................... £67,500 NEW HOLLAND T7.225, 2016, Auto Command, f/links & PTO, cab pack 2, Isobus, Power Beyond, 160Lpm, hyd pump, 650/65R42540/65R30 @85%, approx 2250hrs .... £67,500 NEW HOLLAND T6.180, 2018, Electro Command, 50kph, AGR, CCLS, f/linkage, leather steering wheel, carpet, Intelliview IV, high mounted headlamps, 12LEDs, 2 beacons, 600/65R38 480/65R28 .................................................... £67,000 NEW HOLLAND T7.210 Range Command, 2018, Classic, 50kph, 1500hrs, loader ready with 2 mid mounts, f/links, 4 spools, 12 LED, Power Beyond, Cab Pack 2 ..................... £64,000 NEW HOLLAND T7.210 Range Command, 2018, Classic, 50kph, 1500hrs, f/links, 4 spools, Power Beyond, Cab Pack 2, 12 LEDs, 650/65R38 540/65R28 ................................. £62,500 NEW HOLLAND T7.210 Range Command, 2018, Classic, 50kph, 1500hrs, f/links, 4 spools, Power Beyond, Cab Pack 2, 12 LEDs, 650/65R38 540/65R28 ................................. £62,500 NEW HOLLAND T7.210 Range Command, 2018, Classic, 50kph, 1500hrs, f/links, 4 spools, Power Beyond, Cab Pack 2, 12 LEDs, 650/65R38 540/65R28 ................................. £62,500 NEW HOLLAND T7.210 R/C, 2017, f/links, 4 aux valves, Classic arm rest, Cab Pack 2, 12 LEDs, 50kph, air brakes, full suspension, 650/65R38 540/65R28 @ 85%, approx 2459hrs ........................................................................... £59,000 NEW HOLLAND T7.250 PC, Sidewinder, 50kph, 2011, 2970hrs, 4 elec remotes, Megaflow pump, f/linkage, joystick, 650/65R42 540/65R30. ..................................... £54,000 NEW HOLLAND T7.225 Auto Command, 2016, f/links & PTO, very good order, tyres @ 50%, approx 4584hrs ....... £53,500 NEW HOLLAND T6.140, 2016, 16x16 Electro Command, 40kph, 3 speed PTO, fully suspended, CCLS 113L pump, 520/70R38 420/70R28 Michelin ...................................... £52,500 NEW HOLLAND T7.210 Power Command, 2014, 50kph, Power Command, Classic spec, air brakes, mechanical spools, f/links, 580/70R42 & 480/70R30 @ 50%, 2400hrs ........................................................................... £50,000 NEW HOLLAND T7.200, 2015, 3250hrs, Range Command, 50kph cab & f/suspension, 4 spools, f/PTO, f/linkage, load sensing couplings, twin beacons on 650/65 R38 & 540/65 R28 ................................................................................ £49,000 T7.260, 2012................................................................... £45,000 CASE Puma 160, 2012, 50kph, full powershift transmission, 5250hrs, 650/65 R38 &, 2014, 540/65 R28@50% .......... £44,500 NEW HOLLAND T7.200 Range Command, 50kph, classic, 4 spools, f/linkage with service, EPM, auto PTO, 710/60R38 @30% 600/60R28 @30%............................................... £43,000 NEW HOLLAND T7.210, Power Command 50kph, f/links & PTO, Classic spec, 4 spools, 520 R42 r/16.9 R30 fronts @50%, 5200hrs .............................................................. £42,000 NEW HOLLAND T6.140, Electro Command, Low Profile Cab, 420/85R38 340/85R28, c/w Trima 3.0+ loader with euro headstock, 2904hrs ......................................................... £40,000

MACHINERY FOR SALE 41030281 61028043 91029141

91029142 41027120 41029731 91029143

91029146

91029147

91029148

41029640 61029720

21025692 21025420

11027211 91029150 91029149 91029151 91029152

21025696 21028472 21025688 31027796

61030223

41029626 31030453 11026732 21029773 21030443 11030920

NEW HOLLAND T6.160, Electro Command, 2013, 4000hrs, f/links & PTO, c/w Quicke Q56 loader with electric control, 600/65 R38 @ 50% & 480/65 R28 @40% ...................... £39,950 NEW HOLLAND T6090 Power Command, 50kph, F/linkage, approx 4600hrs, 580x70x38 rear, 480x70x28 fronts ......... £39,500 NEW HOLLAND T6.165 cab suspension, 600 tyres@ 20%, Dual Command, 3 spools, hyd hitch, air con, air seat, MX U309 loader, 5800hrs, 2015............................................. £37,000 CASE Maxxum 110, 3134hrs, 40kph, std f/axle, cab suspension, 16x16 transmission, 3 spools, air con, 480/70R38 380/70R28, Trima +4.1P loader, euro/SMS headstock, 3rd service, hyd locking.................................. £36,000 NEW HOLLAND T6070 Range Command, 2011, 50kph, f/linkage, 6700hrs, 4 spool valves, on 520/70x38 60%420/70x28 20% ........................................................ £34,500 MASSEY Ferguson 6480 Dyna 6, 2007, 6832hrs, mechanical spools, f/links, air brakes, air con, cab suspension, 460/85R38 & 380/85R28, c/w Quicke Q60 loader, mechanical locking, euro headstock, 3rd service ... £34,000 NEW HOLLAND TD5.95, 12x12 with shuttle, 3 spools, air seat, air con, 16.9 R34 tyres, only 600hrs ........................ £32,000 NEW HOLLAND T7030, 2008, Power Command, c/w manual spool valves, cab suspension, f/axle suspension, 50kph, f/linkage, 1 ﬂashing beacon, 540/1000 PTO on 650/65R38 rears & 540/65 R28 ....................................... £29,500 NEW HOLLAND TS125A, 2004, Electro Command 40kph transmission, cab suspension, 4 manual spools, air cond, 14 10 series weights, f/fenders, on 520/70R38 & 420/70R28 ...................................................................... £28,000 NEW HOLLAND T7050, Intelliview 3, f/links, 5 electric spools, joystick, 7200hrs, 50kph, air brakes, 650/70R38 @ 40%, 600/70R28 @ 35%................................................. £27,000 CASE MAXXUM 110, 2010 c/w MX loader with Chilton headstock, power shuttle, 4235hrs, 16x16, air con, 2010 . £24,000 NEW HOLLAND TS135A Electro Command, 2004, 8100hrs ........................................................................... £21,500 NEW HOLLAND TM190, 7500hrs, 4 electric spools, f/links .............................................................................. £18,000 CASE JX90 4WD, 2008, Syncro transmission, f/w a MX U8 loader, approx 5800hrs ......................................... £16,750 DAVID BROWN 1390, 2wd, runs & drives .......................... £1,500 SET of 22 fan weights & carrier c/w 3pt linkage frame. ....... £1,395

31028874 21030806 21029562

61030246 41030133

61030222 21029688

51030151

61030737 61030191 31030213 61030068 41030965 91030660 21026166 11019256 91030491 21025951 61027445 41025881 31025958 21030000

CLAAS 2013 Lexion 760 Montana, hrs: 959/608, 900/60R32, 600/65R28 3D sieve system, dust extraction system for f/ elevator, header brake air compressor, straw chopper/chaff spreader c/w power spreader Quantimeter yield meter & moisture meter with printer LH & RH laser pilots (steering), 9m Vario cutterbar with rape kit Sn.71621123, 2014, LH & H hyd vertical knives, 4 wheel turntable style header transporter....POA NEW HOLLAND CR8080, 2012, 24” Trax, 30’ 760 VF header ..POA NEW HOLLAND CR980, 2006, 30’ Biso Cropranger header & trailer, 2135 engine/1662 threshing hrs, chopper & chaff spreaders, smart steer, 900/60R32 540/65R30 .......................POA NEW HOLLAND TX 66 SL, 1993, 20’ Autoﬂoat, chopper, chaff, 650/75 R32s 4950 engine hrs .......................................POA

41029373 31030140 41026649 41030229 61029437 41029115 41028306 11025985 41029402 41029777 11031014

BOBCAT E80 excavator, 2012, hitch & buckets included, tracks 50%....................................................................... £33,500 TAKEUCHI TB228, 2014, 12” 24” 48” buckets c/w dummy pins & manual quick hitch, 1555hrs ..................... £18,500 TAKEUCHI TB216 mini excavator, needs tracks, 2016 ...... £14,000 DAEWOO Solar 55 excavator, 2005, 5.5t, 4340hrs, c/w blade, quick hitch, 4 buckets 12” 24” 36” & 60”............... £13,000 SH60 Sumo Tomo digger 6t, 6000hrs, rubber tracks, f/ blade, 5’ ditching, 4’ digging, 3’ digging, 1’ digging, manual quick hitch ............................................................. £9,500 BUCKETS – 12” & 24” digging, 60” ditching, to ﬁt TakeuchiTB260 ..................................................................... £550

FORAGE HARVESTERS & PICK UP WAGONS

21026470 91029930 21030772 91027932

31025383 11030774 21027641 21030426 21026427 31030179 61029706 11030186 31027595 31027455 51028026 31027636

11030543 21028265 61029965 61030252 71028756 91029382 21030153 61026897

FERTILISER SPREADERS

91030073 91029908 21030679 21028279

41029059 21030517

EXCAVATORS

61029823

21029376 11026291 41026382

TAYLOR 500mm wrapper, c/w Honda petrol hyd power pack .................................................................................. £2,000 11028228 PARMITER TR66 Round Bale Wrapper, 750mm ﬁlm, hyd control£95041030650 NEW HOLLAND RB150SF, 2016, approx 6500 bales......... £21,000 NEW HOLLAND RB150 SF round baler, 2016 ................... £20,000 NEW HOLLAND RB150 Superfeed, 2015, 20000 bales approx ............................................................................. £19,750 MCHALE V660 round baler c/w hyd brakes, chopper, 4 9000 bales, 2013............................................................. £16,000 NEW HOLLAND BR7060 Super Feed II, 2012, c/w wide tyres, rotor feed, approx 30000 bales ............................... £13,000 NEW HOLLAND BR7060, 2012, 25000 bales ................... £12,500 JOHN DEERE 592 round baler, 2009, wide pickup, 19,000 bales.................................................................... £11,950 CLAAS Variant 280 round baler, 380/55 R17 tyres, net wrap ............................................................................ £9,750 WELGER RP535 round baler, 2008, wide pick up, std control box ................................................................... £8,950 NEW HOLLAND BR7060, hyd reverser, 2009 ...................... £8,500 NEW HOLLAND BR750A round baler, 2006, Super Feed, c/w 480/45-17 tyres .......................................................... £7,950 JOHN DEERE 680 square baler, 1997 ................................. £7,000

HAYBUSTER H1000 Tub Grinder, 2014............................. £24,950 TEAGLE Tomahawk 9500, 2018 c/w swivel chute, wide angle PTO, tailgate extension ............................................ £14,950 STRAUTMANN 17 twin tub, 2011, c/w f/conveyor & r/door £9,500 TEAGLE 8500 Tomahawk, 2015, trailed straw chopper, electric controls ................................................................. £8,950 KVERNELAND 853 Pro, trailed, side discharge, swivel chute, hyd back door, road lights .................................................. £8,250 KUHN 1070 diet feeder, 2007, c/w side elevator ................. £7,950 KING SD6E straw bedder, 2008 c/w top/swivel chute, side chute, electric controls, 11.5/80 - 15.3 wheels, ................. £7,950 TEAGLE Tomahawk 8500, 2012, trailed straw/silage bedder c/w swivel spout ................................................................ £6,500 REDROCK 16FD diet feeder, 2008 ...................................... £4,950 KUHN 3560 Primor trailed straw & silage beeder/feeder, 2007, electric controls, top & side chute............................. £4,750 TEAGLE Tomahawk 808 c/w swivel spout, 2007................. £4,250

TEAGLE SX3000, 2010, 1900L capacity, folding hopper cover, working width 6–24m, Centrelift border spreader, road lights.......................................................................... £2,950 SULKY DPX Prima, 2011, MA1500L c/w folding cover........ £2,950 SULKY DPX Expert, 2800L, hyd shut off, no cover .............. £1,975 VICON Rotaﬂow, 2008, twin disc, hyd shut off, RS-C model, good vanes, working order ................................................. £1,300 SULKY DPX Expert, 1500c/w hopper cover ........................ £1,200

BALE WRAPPERS

BALERS & HANDLERS

BEDDERS & FEEDERS

11030881 61022637 41029479 41022198 61030602

COMBINES 51030463

ATV/RTV UTILITY VEHICLES

KUBOTA RTV900 MR, 2011, roof, windscreen, road reg, approx1689hrs .......................................................................POA KUBOTA RTV-X900TR camo, c/w full cab kit, heavy spring upgrade, bed liner, heater, radio, tow ball & worklamp kit .. £11,950 KUBOTA RTV-X900TR, 2016, full cab, worklights, heater, bed liner, radio, tow ball, radial big horn tyres @ 50%, approx 1350hrs, very good cond ...................................... £11,850 KUBOTA RTVX900TR windscreen, 2016, wiper, load liner, tow hitch.......................................................................... £10,950 NEW HOLLAND Rustler 120, 4x4 c/w a fully glazed cab, 2013, very little use from new. ........................................... £8,500 KUBOTA RTV900MR, 2015 ................................................ £9,500 KUBOTA RTV900 camo, drop down doors, tow ball ............ £8,750 POLARIS Ranger, diesel, full cage & heater, road legal, wide tyres, 2/4wd, 2015 ............................................................ £8,500 HONDA TRX500ES, 2015................................................... £4,950 HONDA TRX500, 2015, road legal kit with cargo box .......... £4,750 HONDA TRX420 FE, 2012, 4668km, 245hrs, electric shift, tow ball .............................................................................. £4,750 HONDA TRX500FE1, 2015, electic shift transmission, 1380hrs, average tyres, .................................................... £4,500 HONDA TRX420 FM2, 2015 4wd, manual, power steering, tow ball .............................................................................. £4,350 HONDA TRX250 FMATV ..................................................... £4,300 HONDA TRX420 FM, 2010, tow ball, as new ...................... £4,250 HONDA TRX500 FPA, 2012, auto/esp, power steering, new tyres, hydro model, good bike, approx 2860hrs .................. £4,250 HONDA TRX500 FM, 2013, tow ball, seat covers, road registered, manual.............................................................. £3,750 HONDA TRX420FA6, 2015, IRS suspension, good tyres, electric shift & auto. ........................................................... £2,950 HONDA CRF150, 2014, junior motocross bike, manual gears, 4 stroke ................................................................... £2,950

NEW HOLLAND BR750 round baler, crop cutter, 2003, bale count 35679, 480/45xR17 wheels .............................. £5,950 NEW HOLLAND 378 conventional baler, wide pick up ......... £2,500 BROWNS Flat 8 sledge.......................................................... £595 BROWNS Flat 8 grab, c/w Euro brackets ............................... £350 FLAT 8 Model 1421............................................................... £450

61028752 21020329 11029563 21026409 31029850

MENGELE SH40N trailed forage harvester, 2001 ................. £8,950 41028230 POTTINGER MEX 6 trailed forager ..................................... £5,750 21030143

GARDEN MOWERS & GROUNDCARE

TORO 3300 Workman truck ....................................................POA TORO 3100, 2000...................................................................POA RANSOMES Highway triple mower c/w 4 knife cylinders .........POA KUBOTA W821R pedestrian mower .........................................POA TORO 3420 Triflex hybrid mower, 2012, cutting units needs attention........................................................................... £10,000 RANSOMES Highway 3 triple mower, 2010 ........................ £8,000 TORO MDE ....................................................................... £7,200 NEW HOLLAND G6035 Industrial ride on mower, 2013, c/w f/mower ...................................................................... £6,500 FERRIS IS700Z 52 zero turn mower, 2018 ......................... £6,500 FERRIS IS700Z 52 zero turn mower, 2018 ......................... £6,500 TORO RM6500 mower, 4wd, 8 blade DPA heads, r/roller scraper kit, Mauser cab, noise reduction kit, window washer kit, MVP filter kit ..................................................... £5,995 HAYTER LT324 triple mower............................................... £5,000 TORO RM3100-D mower ................................................... £5,000 KUBOTA GR2100 Mk2, diesel ride on mower with collector, 2006, only 340hrs ............................................................. £4,250 DENNIS Razor Ultra cylinder mower c/w tungsten groomer & T bar handle (D140T)...................................................... £4,000 WESSEX CRX240 roller mower, 2017 c/w rollers f/& rear ... £3,750 WESSEX RMX180 roller mower, 2017 ................................ £3,450 HAYTER LT324, 2005......................................................... £3,000 HAYTER LT322................................................................... £2,500 TORO 2110 Workman, 2003, good cond, electric bed lift, approx 1300hrs ................................................................. £2,000 ALLETT TR34 rotary mower 2016 ...................................... £1,750 10” Heads to fit Toro LT range ........................................... £1,500 TM4749 trailed gang unit ................................................... £1,500 TORO Turfmaster walk behind mower c/w 76cm cutting width ................................................................................. £1,000 STIGA 3084H Estate, 2014, 84cm cutting deck ..................... £995

81030855 71028156 71029984 71025215 71022846 71025863 71023340 41027043 71030278 71030279 71026789 71026761 71016000 41030632 71029691 71030860 81030835 71023457 71023455 71030874 71029756 71021409 71020586 51024388 41023335

Plus loads more stock – please view our websites www.hallmarktractors.com & www.russells.uk.com 212 www.farmads.co.uk July 2019

fg_class_july_19.indd 212

27/06/2019 11:48

Hallmark Tractors Russells (Kirbymoorside) Ltd 66472

MACHINERY FOR SALE DENNIS Autorake Mk4 ....................................................... £1,250 KUBOTA TRC140 rotavator, 2015, 1.4m ............................. £1,200 DENNIS D054/6 Sorrel roller cassette ................................ £1,000 AMAZONE + S 750 spreader ............................................. £1,000 LLOYDS 5 gang mower, steel wheels, towing frame, 10” cylinders with 6 blades....................................................... £1,000 GREENTEX vibrating rollers, to ﬁt JD2500 Greens mower....... £750 RANSOMES Supergreen cylinder mower ............................... £600 DENNIS Turfman................................................................... £600 RYETEC Topper ..................................................................... £500 STIHL Multi Tool......................................................................POA

71029695 61030629 71027859 71030859 71024468 81029072 71029694 71029693 71030124 71030621

HEDGECUTTERS

41030219 61030633 51030651 41030742 51029921 21030809 31029837 41030218 51030889 61028170 11020774 51029032 41024375 31030315 51029918 41030636 41029475

HANDLERS & ATTACHMENTS

MANITOU MLT737-130 PS, 2017, Elite, CRC, air con, Powershift, 1663hrs......................................................... £54,000 MANITOU MLT741T LSU 120PS Elite, 3000hrs, c/w hyd locking, Manitou headstock, PUH, new set of tyres, CRC, A/C 2016 ......................................................................... £48,000 MANITOU MLT735 PS, 2015, 3605hrs, new tyres ............ £45,000 MANITOU MLT741PS, 2014 c/w hyd locking, CRC, air con, pickup hitch, boom lights & tool box, 460/70xR24 new tyres, warranty up to 3000hrs, approx 2438hrs, new tyres ......................................................................... £42,500 MANITOU MLT627T EV 24, 2014, c/w CRC, air seat, 2700hrs, tyres 30%.......................................................... £39,950 MANITOU MLT735 Elite, 2014 LSU 120 powershift, CRC suspension, PUH, hyd locking, Manitou headstock, air OCN, air seat, new set of 24” tyres, approx 4325hrs.................. £39,500 MANITOU MLT634T LSU 120PS, 2015 Elite, c/w hyd locking ............................................................................. £35,950 MANITOU MLT735T, 2014, 120 LSU PS Premium c/w CRC, hyd locking, Mercedes engine, PUH, new 460/70R24 tyres, approx 3230hrs.................................... £32,500 MANITOU MLT735T 120PS, 2012, 3300hrs, 120 LSU PS, air seat, boom work lights, air con, trailer braking, new tyres ......................................................................... £29,500 MANITOU MLT634T 120PS, 120 LSU PS, CRC, JSM joystick, air seat, boom work lights, air con, hyd locking, very tidy machine, tyres @ 15%, approx 3700hrs ............ £28,500 MANITOU MLT625T, 2012................................................ £28,500 MANITOU MLT735T, 2012, LSU 120 PS, Elite c/w hyd locking, new tyres ............................................................ £27,500 MANITOU MLT627T, 2008, Mono Ultra, 24” c/w p/tines, tyres 20%, v tidy, approx 4500hrs .................................... £26,000 MANITOU MLT627T, 2008................................................ £25,000 MANITOU MLT627T EV 24, 2007, approx 4700hrs, hyd locking, air seat, air con, Evo joystick, RDS Weighlog 200 £24,500 MANITOU MLT741T, 120 LSU PS, air seat, boom lights, extra beacons, 50% tyres, approx 7000hrs ....................... £22,500 MANITOU MLT741T, 2011, 120 LSU PS, air seat, boom lights, extra beacons, 50% tyres, approx 7000hrs ............. £22,500 CAT TH330B telehandler 6100hrs, c/w 7’6” Strimech bucket, 7’ muck grab, pallet forks, air con, smooth ride, cone & pin headstock, hyd locking, boom lights ............... £18,500 MANITOU MLT626, 400/70 R20, 4420hrs ........................ £14,500 JCB patch planer to fit skid steer, 2016............................... £6,500 VOLVO patch planer to fit skid steer, 2012 .......................... £6,500 VOLVO snow plough to fit skid steer, 2012.......................... £1,650 CHERRY 7’, 10 tines on fork, 6 tines on grab, on New Holland brackets......................................................... £1,600 ALO 230SE Silocut sheargrab, 2009 c/w Manitou brackets . £1,500 ALO Flexgrip 160, 2014, c/w pipes & JCB brackets................ £850 GENERAL purpose bucket, very little use, good blade, euro brackets................................................................................ £700

61030076 61027754 61029690

11024219 21029609 61022638 31030165 11027297 11027613 21023157 31030224 31027876 21025928 31027746 91030095 21023310 21023309 21030155 11030894 41030642 41030643 41030644 61025441 41028290 21030784 61022632

41030640 41030645 41030641 11025593

MOWERS & HAY MACHINERY

MCHALE R68-78 rake, 2018, 6.8m-7.8m hyd width, flotation, spare wheel, tandem wheels on rotors................ £16,000 POTTINGER TOP 762C, 2014, 6.7–7.5m working width, trailed twin rotor rake, hyd working width adj, 5 wheels under rotor, swath curtain, ag tread tyres .......................... £12,750 CLAAS Liner 3100 twin rotor rake..................................... £12,000 MCHALE F3100, 2017, conditioner .................................. £11,750 MCHALE R3100, 2018, conditioner .................................. £12,250 TORO STX-26 stump grinder, 26hp ................................... £11,440 MCHALE R3100 r/mounted mower conditioner................... £8,500 KVERNELAND TA4232 LT mower conditioner c/w spreading head & swivel hitch ............................................................ £5,500 KUHN GA6501, 3 wheels under rotors, road lights .............. £5,500 LELY 510CD Rotonde, tedder rake 2010 ............................. £5,350 FELLA TH800 tedder, 2006................................................. £4,950 POTTINGER Catnova 206 trailed mower conditioner, 2003.. £4,500 KUHN GMD700 mounted mower, 2014 .............................. £4,500 GIRAFFA 210 offset flail topper, 2014 ................................. £4,500 MCCONNEL Magnum 230 Euro flail mower, 2015 .............. £4,250 CLAAS 3050C Disco r/mounted mower conditioner 2004 ... £3,950 VOTEX 260 topper, very little use, good working order ........ £2,250 MAJOR 8000 roller mower, 2011 ....................................... £1,950 MCCONNEL Topper 9, 2004, new blades............................ £1,750 MCCONNEL PT9 Topper .................................................... £1,600 HAYBOB 300 ..................................................................... £1,400 FLEMING 6’ rotary topper, 2018 ............................................ £885

21030707 91028184 31027620 91030348 91030349 71030727 61030883 11030882 91028236 41029870 21027338 61029566 41029890 21027443 31027045 51029771 21027482 21030708 41027449 21026443 91029698 41029972

OTHER MACHINERY

GROUNDHOG Welfare Unit, 2014, c/w generator, kitchen, seating & toilet ................................................................... £8,950 ATLAS Copco 60KVA, 2010, Perkins engine ....................... £6,950 GROUNDHOG Welfare Unit, 2005, c/w generator, kitchen, seating & toilet ................................................................... £4,500 LOGIC MSP120WT sweeper/collector, as new .................... £3,300 OPICO 6m hyd folding grass harrow, 2010 c/w 8mm tines . £2,500 KIDD PTO driven saw bench, blade sharp & good cond ......... £925 SWALEDALE ATV feeder, 2018, electric controls & counter .... £900 SUTON 6’ brush.................................................................... £450 FAN JET Mini Broadcaster, variable speed & feed, 110 control, large & small rollers & spacers ................................. £750 SWALEDALE ATV feeder manual slider, 90% tyres.................. £600

41030639 21028243 41030638 41027760 41029974 41027817 91030661 41023927 31030570 31029408

PLOUGH & PRESSES

LEMKEN Europal 8, 6 furrow plough, shearbolt protection, 2004 c/w slatted mould boards & a Claydon Furrow Cracker ............................................................................ £10,500 51030325 SIMBA Unipress 4.6m folding press, f/tines, D ring press, road lights........................................................................ £10,000 61030914 SIMBA hyd folding press c/w 2 row trailed & leading tines.. £3,500 41027995 DOWDESWELL DP120S, 1996, 6 furrow ............................ £1,750 41019740 NRH 3M, 2007, f/rigid press c/w f/manual adj cultivator tines£3,000 41028145 WATKINS f/press, 3m D ring press, steering, 2 rows f/tines £2,750 61030912 DOWDESWELL DP100S, 5 furrow, shearbolt protection, r/ discs, depth wheel, with spares .......................................... £1,500 41022344 MICHAEL MOORE 4.5m trailed press ................................. £1,950 41025577 DOWDESWELL DP7 4 furrow reversible ............................. £1,600 61028889 1.5M F/press c/w spring tine bar ........................................ £1,350 11029572 RITCHIE 1.5m f/tyre press .................................................... £995 No Number RITCHIE f/tyre press, 1989 ................................................... £950 11025433

ROLLS

TWOSE end tow roller, 12’, 2012........................................ £4,250 TWOSE 6.3m, 1994, horizontal folding rolls c/w 24” rings .. £4,150 WALTER WATSON 10’x 36” ballast roll ,c/w end tow kit, 2015.................................................................................. £3,950 EDLINGTON 6m Cambridge roll, vertical fold, plain rings .... £2,250 TWOSE 14’ roller ............................................................... £1,200

21027501 61030910 41030635 11030667 11028852 21024120 11030927 21026760 41029634 41029452 41028144 41029735 21030735 31029847

SPRAYERS

KELLANDS 2700 Agribuggy, 2012, 24m boom, auto steer, on 560/60R22.5 tyres & 12.4x36 rowcrops...................... £59,950 41029614 HARDI Commander HPZ, 2014, 4500L, axle steering, HC9500 controller, suspension, prime ﬂow, auto wash/ auto ﬁll, auto height, 18.4 tyres ........................................ £28,500 61030382

TANKERS & MUCK SPREADERS

SHELBOURNE 2200 Powerspread, 2009, Pro model, wide angle PTO, reverse auger drive, manual anti bridge ........... £10,500 HI SPEC 2300 recessed tanker .......................................... £6,850 RICHARD WESTERN SD 20 dual spreader on 650/75R32 wheels 80%, 2009 ............................................................. £6,950 MAJOR LGP2400 tanker, 2400 gal, s/d/bar, 30.5 tyres, top ﬁll ................................................................................ £5,500 TULLOW 2000 dual spreader.............................................. £2,500 HI SPEC 800 barrel spreader, 2015, c/w on new 385x65xR22.5 ................................................................... £3,500 WOOTTON 8000L single axle tanker, 50cm r/service hatch . £3,900 HI SPEC 800 barrel spreader, 2014 .................................... £3,500 FLEMMING MS700 muck spreader, 2013........................... £2,750 HI SPEC 1000 barrel spreader, new rotor, big tyres ............. £2,000

91029445 41029349 41030900 21030156 41025371 51025839 11030367 41028513 31029440 91029699

TILLAGE

NEW CULTIVATING SOLUTIONS RLM400 linkage mounted Rapidlift, telescopic c/w electro diverter valve, clevis hitch & depth wheels.................................................................... £12,300 41021307 GREGOIRE BESSON Combimix auto reset, 2013 stubble cultivators .......................................................................... £8,000 41022283 OPICO He-Va 3m disc roller c/w 3m combilift..................... £7,500 41019714

TRAILERS

31030569

RICHARD WESTERN SF14HS silage trailer, 2017, air brakes, hyd r/door, s/d/bar on 560/60R22.5tyres .......................... £15,950 RICHARD WESTERN SF16HS silage trailer, 2017, air brakes, hyd r/door, s/d/bar on 560/60R22.5 tyres ......................... £16,950 MARSHALL QM12 silage trailer, 2017, flotation tyres ........ £13,950 RICHARD WESTERN SF12 12t, 2011, c/w silage sides, hyd r/door, 10 stud axle, & 560 Vredestein tyres...................... £11,950 EASTERBY ET12 grain trailer, 2003, low root, super singles, hyd r/door, fixed drawbar ................................................... £8,500 HENTON 14t, 2008, Brabazon grain trailer c/w super singles, grain chute, sprung axles & r/over sheet ................ £7,950 MARSHALL 14t trailer, 2000, air brakes, oil brakes, hyd r/ door, s/d/bar, on super singles 385/65R22.5 wheels........... £7,500 MARSHALL QM12 trailer, flotation tyres, std r/door with grain chute, r/over sheet, 2008 ........................................... £6,500 TRIFFITT 10–11t trailer, hyd r/door..................................... £5,150 EASTERBY ET12 trailer....................................................... £5,000 FRASER 16t tandem axle, monocoque trailer, r/over sheet .. £5,000 WEST 10t silage trailer, 2003, s/d/bar................................. £4,950 IFOR WILLIAMS DP120 livestock trailer, 2011, demount .... £3,750 IFOR WILLIAMS 12’ livestock trailer, 12’x6’6”, tri axle, alloy floor, sprung axle, sheep decks, cattle gate, 186/60R12C wheels, 2006 ..................................................................... £3,750 FRASER 8t, twin axle, fixed sides, std r/door, road lights ..... £3,500 IFOR WILLIAMS TA510G 12’ livestock trailer, 2012, twin axle, no decks 90% tyres, very tidy..................................... £2,950 NUGENT LS126 livestock trailer ......................................... £2,950 MARSHALL MS8, 8t, twin 6 stud axle, lights up &over mesh door solid axles (ideal horse muck trailer) ........................... £2,750 GRAHAM Edwards 12’ cattle trailer, 2008 c/w sheep deck sand triple axle & 19.5/53 R10 tyres .................................. £2,350 PENDER feed trailer for 35 cows, 11.5/80-15, 3 wheels, steel construction .............................................................. £2,100 IFOR WILLIAMS LM126G, 12’ flatbed, c/w sides, ladder rack, ramps, recent tyres.................................................... £1,800 6-TON single axle tipping trailer, solid steel sides hinged mesh tail gate (ideal horse muck trailer) ............................. £1,650 IFOR WILLIAMS 12’ cattle trailer ........................................ £1,500 IFOR WILLIAMS tandem axle trailer, 1989, 10’x5’3”, steel/ wood ramps, 2600kg capacity, 155/70x12 tyres, 1989 ...... £1,350 HUDSON 13” flat bed trailer with sides ............................... £1,300 INDESPENSION plant trailer, 8x4, twin axle, mesh floor, full width tail door, lights ............................................................. £995

51030326

380/85R28 460/85R38 30% .............................................. £1,350 21029834

POWER HARROW & SEED DRILLS/SYSTEM DRILLS VADERSTAD RDA600S seed drill, 2011, approx 1800 ha, IDC, std control station, pre-em markers, track erads, spare wheel, will have new discs fitted all round......................... £42,000 VADERSTAD RDA400S seed drill, 2015, approx 3796ha, 2015, interactive depth control, system disc aggressive, .. £38,000 KVERNELAND TS EVOEX, tined seeder, 2016, 6m TS Evo, ocus 2 monitor, track erads, levelling board, following harrow, additional shut offs, pre-em mkrs, hyd fan drive, press wheels, half width shut off, 500L hopper ext, electric metering, 1400acres ........................................................ £25,000 SULKY XEOS Pro 3m, 2013, Sulky Cultiline fit kit, pre-em markers, hopper work lights wheel scrapers (20), c/w Sulky HR3000 p/harrow (packer roller version) done approx 1000 acres ............................................................................... £24,500 VADERSTAD RDA600S, 2005, cleated tyres offset, 4239ha @ 13th Dec, rigid track erads, system disc ...................... £19,950 VADERSTAD RDA400S 5028 ha, 2006, system disc, no pivot packer ..................................................................... £17,000 VADERSTAD RDA 400S c/w f/packer, rigid track erads, System disc, levelling board, following harrow, pre-em markers, approx 19k acres .............................................. £15,000 KVERNELAND TS6000 EV 2010, 5 rows tines, steps, following harrow, 1.25t capacity, lights, track erads .......... £14,950 GASPARDO 300, 2013, 6 row maize drill c/w microgranular kit ....................................................... £12,950 KUHN HR3003 c/w fast fit tines, 2008, Maxipacker roller, LC302 drill with side markers, 3 row coulters, steps & following harrow Hector 3000 control box, good cond ...... £11,950 KRM 4m drill c/w Lemken Zirkon 10-400 p/harrow, notched rubber ring packer, track erads, clod bar, 3 or 4 tramliner, bout markers, variable rate adj, half width shut off, following harrow ............................................................................. £10,000 AMAZONE RP 402 p/harrow c/w AD-P 402 4m drill with disc coulters ...................................................................... £9,750

VADERSTAD Rapid 400F system disc, in-line cleated wheels, following harrow, pre-em markers, bout markers, track erads ......................................................................... £7,500 KUHN HR3004D p/harrow, 3m, r/packer c/scrapers, marker lights, done 1000 acres...................................................... £7,000 KUHN HR3004D p/harrow 2014, Levelling Bar, Fast Fit 2 Tines, Maxi Packer. ............................................................ £6,950 AMAZON AD 403 Superbox drill, 2 row suffolk coulters, following harrow, c/w Amazone 4m p/harrow, levelling board, packer roller ............................................................ £5,000 AMAZON AD302 p/harrow drill combi, No tramline, disc coulters ............................................................................. £4,000 KRM TI305 drill combination, c/w 4m KRM Drillmate, hyd folding, suffolk coulters, following harrow .......................... £3,500 KRM H.94 p/harrow, 3m, crumbler roller ............................ £2,100 RABE PKE 300 packer roller, bolt on tines........................... £2,500 ACCORD 6m tandem air drill ................................................ £975

91028528 31028347

11030206

61030909 11029053 31027688 11018848 11020311 51029826 41027541

41029897 41029898 41029896 41027892 31027592 41030547 41029225 21029816 11030837 61029576 71030420 41027308 61030662

Buy and sell online — www.farmads.co.uk

MCCONNEL PA6570T, 2017, 3pt linkage mounted h/cutter c/w 1.5m head revolution controls ................................... £18,500 MCCONNEL PA6577T h/cutter, 2015, T flails, Revolution controls .......................................................... £14,750 MCCONNEL PA5860 h/cutter, 2016, c/w motion control, 1.2m Multicut flail head c/w F10 flails & road lighting kit ........................................................................ £13,500 SHELBOURNE REYNOLDS HD767 VFR, h/cutter, 1.5m belt drive flail head, axle frame & A frame attachments, hyd roller, 2400hrs, 2012........................................................ £11,250 SPEARHEAD Twiga 655T h/cutter, 2012 c/w 1.2m flail head, joystick control, 3pt linkage mounted, & LH cut ................ £11,000 SHELBOURNE REYNOLDS HD60T, 2011, 1.2m head, elec controls, approx 3000hrs ................................................... £9,950 MCCONNEL PA58 h/cutter, 2011, cable control, 1.2m Multicut head, f/& r/flaps .................................................... £9,500 MCCONNEL PA5360, 2014 c/w F10 flails 1.2m Multicut head & switch controls....................................................... £8,850 MCCONNEL PA60E h/cutter c/w joystick control, 1.5m Multicut flail head LH cut & 3pt linkage mounted ................. £8,000 BOMFORD Kestrel, 2012, Evo, cable controls..................... £7,350 FERRI h/cutter c/w electric control & 1.3m head, 2002.................................................................................. £6,750 MCCONNEL PA59E, 2003, c/w joystick controls, 1.2m flail head, 3pt linkage mounted & LH cut ................................... £6,500 MCCONNEL PA93 h/cutter, 3pt mounted, cable controls c/w 1.2m head ......................................................................... £3,500 MCCONNEL PA48 h/cutter, cable control, stabilised 3pt linkage, F91 flails ......................................................... £3,500 MCCONNEL PA2060 h/cutter, 1992 axle bracket mounting, 1.6m flail head with competition flails, LH cut, switch box controls, mid cut ditch cleaner & TI hyds ............................ £3,500 BOMFORD Bushmaster 580 h/cutter c/w boot flails, 1.2m head LH cut works from tractor spools s/n 1211K .............. £2,500 MCCONNEL PA34 h/cutter, 3pt mounted, cable control, 1.2m head c/w t flails ......................................................... £1,950

JCB bucket to fit skid steer c/w brackets, 2014 ..................... £495 JCB pallet forks to fit skid steer c/w bkts 2014 s/n 2034013.. £495 JCB Pallet Forks to fit skid steer c/w brackets, 2015 .............. £495 SINGLE Bale Spike, 2018, 3pt linkage ................................... £370

11030698 11029933 11030884 41028160 41029643 41029893 41027133 91030384 41029644 41030902 11030786 61029989 21030625

WHEELS & TYRES

Please call Jim Nash on 07734 550400 or David Hirst on 07792 927432 or email jim@hallmarktractors.com July 2019 www.farmads.co.uk 213

fg_class_july_19.indd 213

27/06/2019 11:48

BAILEY 18t Beeteaper, air brakes, sheet, chute, front window, extra lights, rear towing loops, mud guards & ﬂaps. POA. www. mktractors.com. MK Tractors Tel 07768 553833/01462 813390(T) (Beds) LEGG tandem axle bulk trailer, 18,500kg MGW, 1984, hold c16t wheat. GDO Howell Tel 07903 089391 & 01728 723683(T) (Suffolk)

ARTIC bale 40' trailer, c/w dolly, hydraulic brakes, gwo. £995+VAT ono. W Varnam Tel 07871 432440/07975 855514 (Warks)

STRONG 32' trailer ﬁfth wheel dolly. £1,000+VAT. J Staight Tel 07761 631549 (Essex) 4-WHEEL trailer with raves, holds just over 100 small bales. £300. R Howard Tel 01353 740485 (Cambs) SINGLE axle, steel bottomed, low loader, 5th wheel. POA. H Ashton Tel 07831 588318 (Lincs) ARTIC trailer, 25' long, needs new ﬂoor, no dolly. £500. J Kiddy Tel 07860 452972 (Cambs) TWO shoot trailers, 10' & 12' long. £900 each. J Kiddy Tel 07860 452972 (Cambs) RITCHIE 56 bale trailer. £250+VAT. J Staight Tel 07761 631549 (Essex)

BAILEY 25' ﬂat trailer, ﬂat steel

MICHELIN 250/95 R44

rowcrow tyres, plus solid 6 stud centres, 80% tread. £450+VAT. C Cornish Tel 07880 976137 (Suffolk)

RICHARD Western 12t tandem axle grain trailer, sprung drawbar & sprung axles, c/w Michelin XML 445x65x22.5R tyres, manual tailgate c/w grain hatch & sock, ﬁtted rollover sheet, used for grain only, always barn stored, exc condition. £6,250+VAT. R Lintott Tel 07799 473374/01728 663476 (Suffolk)

very good condition, hydraulic tailboard. J Crooks Tel 07711 137195/07747 771769 (Suffolk)

IFOR Williams 12' livestock trailer, c/w decks & partition gate, wheels on side. £900 ono. P Hinch Tel 07866 604132 (Leics)

IN AGRI

TYRES

55-62377

SPECIALISTS

•ROWCROP WHEEL ASSEMBLIES

•STOCK DUAL WHEELS NEW/USED

•WHEELS AND CENTRE DISKS

•WHEEL MODIFICATIONS •SECOND HAND & PART USED

•PART EXCHANGE CONSIDERED

ct C Conta

olin S

ims

05008801 8 1 3 07801205 460els.com Tel

COMPLETE set of wheels for JD6175-6215 or Fendt 7 Series, 20.8x42 Trelleborg rears 60%, 16.9x30 Trelleborg fronts 50%, very good condition, new in 2017. £3,200+VAT. E Clark Tel 07879 698807 (Norfolk)

Mitas SFT 800/70R32

and wheel problems

TYRES & WHEELS www.bwt.uk.com info@bwt.uk.com

Wheel barrow to Combine we have the answer! OVER 40 YEARS EXPERIENCE

DISCOUNTS FROM 25%

All makes sold

£3,500 100%, take off (pair of) www.lfmachinery.co.uk

07790 023538

Part exchange welcome

Call Stuart on:

01328 862 332 077362 71058 SET of wide wheels & tyres, rears 800/653/32 50%, fronts 540/65/28 95%, came off JD7810. £1,800. D Pike Tel 07789 927662 (Norfolk)

At BWT we specialise in new and used wheel solutions for Rowcrop, Standard, Dual Wheel & Flotation applications.

FRASER L25T bale trailer, c/w sprung axles, hydraulic brakes & storage box, in very good condition, call for more details. £4,250+VAT. N Gaunt Tel 07999 855169 (Derbys)

AS Marston 10t grain trailer, 1985, manual tailgate, grain hatch, hyd tip & brakes. £2,950+VAT. T Golding Tel 07708 244506 (Essex)

APPLICATIONS

•FLOATATION

YOUR Agri Tyre

with mechanical opening tailgate & spare wheel. £2,750. J Suckling Tel 01440 730367/07771 970820 (Suffolk)

tipping trailer, 2011, vgc, 12.5/80-15.3 tyres, 80% good. £3,500+VAT. S Parrish Tel 07785 502436/01992 572511 (Essex)

MARKET LEADERS

Let us solve MARSTON 10t grain trailer

MARSTON D56 7.5t dropside

•SPECIALISED WHEEL

e andwh m ltyres els.co cultura resandwhe ri g a sales@ riculturalty g www.a BOSTON

GRAIN trailer, barn stored,

PAIR of Michelin Spraybib

rowcrops, 380/90/46, 10 stud centres, removed from trailed sprayer, 95% tyres, as new, will ﬁt rear of Fendt 7 Series or JD 6000 Series. £1,600+VAT. E Clark Tel 07879 698807 (Norfolk)

ﬂoor, rope hooks, 385/65x22.5 tyres, hydraulic brakes, front fold up splash board, gc. J Brook Tel 07957 846865 (Lincs)

KTWO Rodeo 14t grain/silage trailer with full silage kit, 2006, hyd door, air/hyd brakes, 560 tyres, excellent condition. POA. R Mansﬁeld Tel 07801 864112 (Bucks) WEEKS 5t grain trailer, stored under cover. £800+VAT. G Butt Tel 07885 407137 (Essex)

MITAS 570/70/28 tyres, 90%. £700/pair. W Fake Tel 07770 815357 (Norfolk)

55-66550

LOW loader trailer, brakes & lights. Offers. R Reed Tel 07533 997915/01289 387233 (Northumberland)

ROLLAND 125 10-12t, hydraulic tailgate, low ﬂoatation tyres super singles, front 95%, backs 30%, full LED light package including LED ﬂasher, been used for carting OSR, wheat & muck, greedy boards also available. £4,995 ono. A Warren Tel 07809 396804/07860 290605 (Bucks)

HERBST 10t low loader, new, LED lights, toolbox, sprung ramps, chequerplate ﬂoor, 18' long, beavertail, Herbst red. £6,750+VAT. www.mktractors. com. MK Tractors Tel 07768 553833/01462 813390(T) (Beds) LEGG 7t high lift trailer, gc. £1,550+VAT. F Howell & Sons Tel 01760 440297/07798 668239 (Norfolk) RICHARD Western 14t grain trailer, 2012, hyd door, air/hyd brakes, 560 tyres, LED lights, excellent condition. POA. R Mansﬁeld Tel 07801 864112 (Bucks)

AGRICULTURAL TYRES & WHEELS

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

TRAILERS (cont)

Call us now with your requirements

01371 832310

STOCKS Dual wheels, 18.4R38 Michelin tyres ﬁtted, 20% tread & perished but hold air, clamps & eyes included, rims have been sandblasted & resprayed, no use for them anymore. £350+VAT. E Coles Tel 07773 335534 (Cornwall) 15.5/80-24 12 ply new tyre & tube, ﬁtted to JCB Loadall wheel. £350. R Lloyd Tel 07538 064839 (Worcs)

TITAN complete wheels & 12 ply diamond turf type tyre, in new condition, 23.1x26, off Kioti golf tractor, also on Hesston baler. £1,250+VAT. R Lane Tel 07831 615912 (Cambs)

10-22.5 tyres on 8 stud wheels (4). £280+VAT. P Freeman Tel 07711 145124 (Lincs)

214 www.farmads.co.uk July 2019

fg_class_july_19.indd 214

28/06/2019 12:35

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226

Tel: 0333 6000 670 sales@doubledaygroup.co.uk www.doubledaygroup.co.uk

The Doubleday Group Your local dealer for

2014 John Deere 6150R AQ 50k, TLS, 3SCV, air con, air seat, p/ seat, air brakes, Continental 20.8R42 16.9R30, 3317hrs ...................£55,000

2012 Massey Ferguson 7618 Dyna-6, front susp, cab susp, f/linkage, receiver, 20.8x38, 16.8x28 70%, 2039hrs ...................................£52,000

2014 Gregoire Besson Sturm Vogel 6m hyd folding, levelling boards, track eradicators, spring tines, crosskill packer ........................................£5,500

Bailey 15t TB trailer c/w hyd taildoor, grain chute, mudguards, reversing lights, s/d/bar and 560/60x22.5 wheels ........£16,500

2015 John Deere 6175R AP Command Arm 40k, TLS, cab susp, AT ready, 4ESCV, f/linkage & PTO, hyd top link, Michelin 710/70R42 600/60R30, 4759hrs ..............£66,750

2014 John Deere 6210R AP Command Arm 40k, TLS, cab susp, AT ready, 4ESCV, D63C a/seat, p/seat, a/c, touch display, f/linkage & PTO, t/fenders, 620/70R42 480/70R30, f/weight not inc, 4952hrs .£55,000

2018 Case Puma 165 50k, front & cab susp, air seat, air con, air brakes, 4ESV, joystick, Michelin 650/65R38 85% - 540/65R28 85%, weight block, 458hrs ...............£65,500

2013 Case Puma 145 PS 50k, f/& cab susp, a/brakes, 4ESCV, Multicontroller, air con, air seat, p/seat, f/linkage, Michelin 600/65R38 70% 480/65R28 70%, 2516hrs ......£43,500

2015 Rabe Carry Bret 416 4m hyd folding cultivator, discs, auto reset tines, 750mm rear packer ......................................£19,750

2012 Merlo P32.6 4ws, air con, pallet tines, 3901hrs ...................................£27,750

2017 Kawasaki Mule Pro DX power steering, tipping rear buck, road registered, full cab, 4wd, tow bar, 1274hrs .....................................£8,950

2014 Alpego DX600 hyd folding power harrow, clodboard, packer roller, lights ..................£14,000

2012 Vaderstad RDA400S system disc (new discs), front tyre packer, track eradicators, pre emerge markers, 2319 hectares ..........£37,500

2018 John Deere 6215R AQ 40k, TLS, cab susp, E-ICV joystick, AT ready, iTec, t/fenders, air seat, p/ seat, 7” display, Mitas 650/65R42 90% - 540/65R30 90%, 594hrs .....£95,000

2010 Vaderstad RD300S Rapid drill, system disc, front tyre packer, on move seed rate adjustment, 635 hectares only....................£21,000

2011 John Deere 6230 PQ 40k, 2SCV, air con, p/seat, 2771hrs, 1 owner from new....£29,750

2014 Gregoire Besson Helios subsoiler, 3m 5 leg auto reset with rear crumbler .....................£5,000

2015 Bailey 16t trailer silage kit, air brakes, s/d/bar, f/window, ladder, sprung axles, hyd taildoor, grain chute, mudflaps, mudguards, 560/60x22.5 Michelin tyres ...£16,250

Buy and sell online — www.farmads.co.uk

2014 Kuhn Megant 480 tine seeder, track eradicators, pre emerge markers, ladder, lights, hyd fan, Quantron S-2 control, 762 hectares ...........................£14,750

2013 Amazone ZA-M Profis Hydro SBS, ladder, wide fill extension, 24/36 discs, cover, lights, Amatron 3 control .....................£6,500

66281

Holbeach Tel: 01406 540 261 Fax: 01406 540 262

Kings Lynn Tel: 01553 617 666 Fax: 01553 617 673

Swineshead Tel: 01205 822 440 Fax: 01205 822 441

Holbeach St. John, Lincolnshire PE12 8SQ

Kings Lynn, Norfolk PE34 3EU

Station Road, Swineshead, Lincolnshire PE20 3PN

Vi sit ou m for r w ac m e hi or bs ne e ite ry

July 2019 www.farmads.co.uk 215

fg_class_july_19.indd 215

27/06/2019 11:49

J Murrell

01493 750999 info@jamesmurrell.co.uk

2013 MAN TGL 7.150 BOX VAN 7.5t, 359391kms, MOT 30/11/19

£6,500

Contract Farm Services

CLAAS 840 AXION CEBIS 66 reg, 927hrs, RTK & steering, warranty

£76,500

Agricultural Machinery Dealers

2015 LEMKEN RUBIN 12 DISC TILLAGE TRAIN double packer, vgc

ROTARY TRUCK/COMMERCIAL 2015 MARSHALL 32’ 15T VEHICLE LIFT air, load sensing, 10 stud & portable lift posts, rated at 28.8t ﬂotations £28,000 total £9,800 £5,000

2010 MASSEY FERGUSON 6485 2014 K TWO ROADEO 1400, DYNA 6 commercial axles, hyd gate, 2400hrs, f/links, mint r/o sheet

2014 JOHN DEERE 6190R 40K AUTOPOWER 3983hrs, 95% tyres

VADERSTAD REXIUS HD 10.2M Cambridge breaker rolls, twin axle, nice

FENDT TRELLEBORG 520/85R42 & 480/70R30 84” track

DISCOVERY 4 HSE late 2012, 140k, serviced every 5000, excellent

2012 JOHN DEERE 6190R 50K AUTOPOWER f/links, 6473hrs, 95% tyres

NEW HOLLAND M100 4171 genuine hrs, 40k, air con, weights

2007 THWAITES 1T SKIP LOADER 1950hrs

2012 DYNAPAC CC1200 490hrs, 2800kg, 1.2m

NEW JPM 20T DUMP hyd gate, air, load sensing 10 stud, 560 ﬂotations

NEW JPM 16T DUMP magic rear door, 10 stud, air

£40,500

£4,500

£11,000

£14,000

£5,800

£10,500

£55,000

£49,500

£15,200

NEW JPM 26’ 11T BALE TRAILERS ﬂotations, hyd brakes, spr d/bar, £8,800 LED lights £8,000

AS MARSTON ACE 10T DUMP TRAILER 80” wheel track, tailgate c/e grain £15,500 chute, hyd brakes £3,500

£13,100

2013 CAT 308E2 CR air con, twin circuit, 4 buckets, 3969hrs

£27,000

NEW 24’ JPM 19TLL hyd brakes, 900 wide ramps

NEW JPM 26’ 11TLL NEW JPM 19TLL NEW STRIMECH PRO-AG SUZUKI 700 KING QUAD BALE TRAILERS air/hyd brakes, load sensing, MUCK FORK GRABS 106hrs, 751hrs from new ﬂotations, hyd brakes, spr d/bar, commercial axles & full range of buckets £9,330 LED lights £11,230 in stock £4,000 £8,000

For more pictures and further details of our stock visit our website www.jmurrell.co.uk

We are JPM Trailers’ East Anglia Dealer J Murrell • Willow Farm • Norwich Road • South Burlingham • Norwich • Norfolk NR13 4EZ

07770 692891

All prices + VAT

63830

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Norfolk Farmers

216 www.farmads.co.uk July 2019

fg_class_july_19.indd 216

27/06/2019 11:51

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 FOUR 375/70R20 tyres, off teleporter, not much tread, cases sound. Offers. D Hurley Tel 07714 293450/01234 781405 (Beds) FLOTATION front tyres 38/20/16.1, on 8 stud rims. £200. W Beers Tel 01604 781494/07712 435168 (Northants)

WEBB 6 row front mounted steerage hoe, vgc. H Epton Tel 07867 638287/01205 480935 (Lincs)

VEHICLES

2003 Defender TD5 bespoke full rebuild

PAIR of 8.3R44 Standen

TERRA tyres & wheels,

Goodyear 66x43/25, gc. £995+VAT. J Brook Tel 07957 846865 (Lincs)

BRAND new set of Fendt 700 Series Bridgestone VT Trac tyres, on genuine Fendt rims, 540/65R30 Bridgestone VT Trac 650/65R42 Bridgestone VT Trac tyres, brand new, rims approx 4/5yrs old, in perfect condition. £7,000+VAT. GW Harrold & Partners Tel 07836 751076 (Norfolk)

John Deere 6320 Row crop wheels

£800 270/95R44 & 11.2R28

www.jmurrell.co.uk

01493 750999

55-66534

6 stud centres, 95% tread. £700+VAT. C Cornish Tel 07880 976137 (Suffolk)

TWO rowcrop wheels, Avon CONTINENTAL 600/65R30

70% tyre & rim for front wheel on Fendt 900 Series, one Continental 480/70R34 70% tyre & rim for front wheel for Fendt 900 Series one 270x95R36 Kleber rowcrop, Sands sprayer (4) 75% heavy duty adjustable wheels. £1,000+VAT. GW Harrold & Partners Tel 07836 751076 (Norfolk)

ROWCROP Taurus Soil Saver RC95 270/95R42 (4) 50%, Nokia Tractor Forest 18.4-38 tyres (2) 20%. £100+VAT each; also Michelin XMCL 500x70R24 (195LR24) (4) 10%. £100+VAT each; one 14.9 R28 Kleber (35%), pair of 600/70R30 Kleber Super 15 (25%). GW Harrold & Partners Tel 07836 751076 (Norfolk) MOLECON 12x38 dual wheels, ﬁve star. C Brown Tel 07979 632866/01255 870253 (Essex) STOCKS Duals, 20.8/42 tyres & rims, will run beside modern 710/70/38 or 650/75/38 as have 38" band ﬁtted, made like this from new, c/w clamps. £900+VAT. E Clark Tel 07879 698807 (Norfolk) MITAS 580/70/38 tyres, 90%. £1,500/pair. W Fake Tel 07770 815357 (Norfolk) ROWCROP tyre & tube, 9.5x48, casing good, tread about 20%, useful spare. £20. T Rix Tel 07713 470297 (Cambs)

8.3x44, 30% tread, 8ply, adjustable centres to ﬁt John Deere. £200+VAT ono. N Lindsey Tel 07885 205680 (Cambs)

NEW set of 4 BKT 460/70-R24 tyres, to ﬁt JCB. £350+VAT each. A Thompson Tel 01953 860353/07884 480302 (Norfolk)

OPICO dual wheels, 18.4-R38 BIBX, 30% tread. Offers. S Parrish Tel 07785 502436/01992 572511 (Essex) STOCKS dual wheels, 20.8R38, silver rim, Goodyear tyres 30%, few cuts but sound tread, c/w clamps. £500 no VAT. S Bloomﬁeld Tel 07884 115091 (Norfolk) STANDEN rowcrops, 8.3-44/9.5R28, MF centres. C Brown Tel 07979 632866/01255 870253 (Essex) NARROW wheels 6.00x19, Ford centres, 6.50x48 Ford centres. D Felkus-Upton Tel 07813 553629 (Suffolk) STOCKS dual wheels, 16.9R38, black rim, Goodyear tyres 30%, few cuts but sound tread, c/w clamps. £400 no VAT. S Bloomﬁeld Tel 07884 115091 (Norfolk)

01493 750999 Norwich, Norfolk

www.jmurrell.co.uk

BKT 900/60/32 tyre, as new

condition, was ﬁtted on combine for 3 weeks, then removed as combine sold. £2,000+VAT. R Ford Tel 07771 640503 (Norfolk)

TOYOTA Landcruiser, 2005, 187000 miles, full MOT, drives well. £6,250. M Robson Tel 07967 139678 (N Yorks)

8-STUD wheel rim, to suit

500/50/17, came off a Massey Ferguson baler, but may ﬁt others. £45+VAT. N Gaunt Tel 07999 855169 (Derbys)

245-65-17 new Open Country MICHELIN 19.5 LR24X M27

set of 4 wheels, came off a Manitou MLA628, 2009. GW Harrold & Partners Tel 07836 751076 (Norfolk)

tyres (4). £200. P Buckenham Tel 07770 797846 (Essex)

FOUR Agri Master 385/65R22.5 tyres on 10 stud rims, off Easterby root trailer, good as new. J Hipperson Tel 07933 766036/01953 602232 (Norfolk)

VEGETABLE EQUIPMENT

PAIR of Trelleborg ﬂotation

wheels, Twin 414 700/5534, off Massey Ferguson 6150, very good tread 90%. £1,500+VAT for the pair. R Brown Tel 07802 397258 (Bucks)

CAR SHOW QUALITY

tyres on 10 stud rims, to ﬁt JCB Fastrac, tyres are VF 600/60R30 with 80% tread remaining, good condition, looking to go narrower. E Coles Tel 07773 335534 (Cornwall)

GOODYEAR ﬂotation wheels,

38x20-16, off MF 6150 2wd, 8 stud. £100+VAT for the pair. R Brown Tel 07802 397258 (Bucks)

£28,000+VAT

FOUR Michelin Xeobib

TWO part worn Alliance trailer

tyres, ﬂotation 328 500/6022.5 16PR, good condition. £250+VAT ono. J Nott Tel 07957 146325 (Norfolk)

SIMON trailed 2 row top lift tanker, carrot/parsnip/red beet harvester PTO/hydraulic, with cab electric controls, new lift belts, good condition. Offers over £3,000+VAT. R Lane Tel 07831 615912 (Cambs)

LAND Rover Discovery Sport SE Tech 2.0TD4 auto, 4x4, 2016, 42,000mls, 7 seats, towbar (never used), keyless entry, climate control, parking sensors, sat nav, full Land Rover service history, excellent condition, one owner. £22,000. D Smith Tel 07929 561955 (Herts)

TOYOTA 2014 Hilux HL2 diesel 4 door double cab pickup, grey, 2.494cc, towbar, bed liner, genuine 23,000miles, owned from new, seats covered from new, MOT 'til March 2020. £11,250+VAT. R Tarver Tel 07484 823124/01386 462707 (Worcs)

Buy and sell online — www.farmads.co.uk

MICHELIN 13.6-R36, with

rowcrop wheels, centres & rims good, tyres perished. J Crooks Tel 07711 137195/ 07747 771769 (Suffolk)

57-66530

TYRES & WHEELS (cont)

LAND Rover Defender 90 Hard Top 2.4 Tdci, 2010, smart looking in metallic Galway green, excellent condition, 42,000miles, Exterior Pack, towball & drop plate, Comfort Pack, rear boot mat, well maintained & serviced, full year's MOT. £17,800+VAT. P Seabrook Tel 07831 834068 (Cambs)

July 2019 www.farmads.co.uk 217

fg_class_july_19.indd 217

28/06/2019 12:43

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

CLAAS EASTERN

Tim Smith

Tel: Mob: E-mail:

01529 303093 07730 780510 t.smith@claas-eastern.co.uk

claas-eastern.co.uk

KVERNELAND LO85-300 £12,995 2013 6+1 N28 bodies, maize skimmers, mechanical width adj, on land/in furrow KV0073

JCB 415 £11,500 1991 18450 engine hrs, hyd locking, JCB loading shovel, industrial tyres JC0281

CLAAS LEXION 760 TT £129,500 2012 1983 engine hrs, 1631 drum hrs, LH laser, power spreader, V930 cutterbar CL8717

KVERNELAND KKRW-100 £29,995 2013 6f front, LB 100 4f rear, centre 3pt linkage, contour following, ploughs as 6 or 10f, hyd Variwidth KV0083

BAILEY £9,500 2009 potato box trailer, hydraulic box squeezer, hydraulic fold up walkways ZZ1718

CLAAS ARION 510 £31,000 2011 120hp, 3200 engine hrs, 14.9 (380/85) R28 fronts, 18.4 (460/85) R38 rears, 3 spools, Eco PTO CT2551

LEMKEN EURO 8 2014 5+1 N90, BS40

LEMKEN SOLITAIR 8 2008 combination drill

LK0726

CLAAS QUADRANT 5300 FINE CUT TA £96,000 2017 120x90 CL8974

LK0723

CLAAS LEXION 760 TERRA TRAC £275,000 2017 10.8m Vario header, 40kph, 327E/261D hrs, yield mapping, air compressor, power spreader CL9053

HORSCH JOKER 8RT £39,600 2015 DD packer roller 55cm, side limit plate, hyd depth adj, hyd leveling boards, 400/60 15.5 wheels HO0096

CLAAS J970 £145,000 2013 28 blade cylinder, 3386 engine hrs, 2354 cylinder hrs, auto shearbar, auto lube CL9128

VADERSTAD RDA 800 S £18,000 2006 System disc 60–70%, rear ﬁll auger, track erad tines, 4 pre em markers (36m), bout markers VA0010

LELY SPLENDIMO 280 FC £5,100 2011 front mounted, nylon conditioner LE0059

CLAAS ARION 410 CIS £39,500 2014 40kph, 110hp, 2919 engine hrs, 13.6 R28 fronts, 420/85 R34 rears, 3 spools, Claas loader CT2546

£16,500

£13,950

66289

63310

Horsch Terrano 6 FG very good condition, late type triple row following harrow, good wearing metal Stock No FG11414 £14,500

Simba X-Press 3m good on new points, good discs, very good packer, well looked after, very genuine Stock No FG11434 £11,950

Vaderstad Swift SW560 excellent machine, 2012, auto reset tines, hydraulic folding Stock No FG11455 £19,950

Kongskilde Vibroﬂex 7400 7.4m trailed, very good genine machine for livening up some sad seed beds! Stock No FG11683 £9,950

Kverneland CLC 9 leg, good cultivator, auto reset legs, c/w new points Stock No FG11728 £3,250

Vaderstad NZA 600 very good machine, new points & harrow tines, very good condition Stock No FG11799 £15,950

Lemken K600A Kompaktor excellent, very sought after machine, spring tines, hydraulic fold Stock No FG11837 £11,950

Vaderstad CR650 Carrier very tidy machine, 2013, c/w cross boards Stock No FG11858 £33,950

Sumo Trio 3m auto-reset, good condition, late type legs, good packer roller Stock No FG11548 £13,950

Vaderstad TopDown 4m very good, on hydraulic reset late type legs, good steel ring packer, good discs Stock No FG11779 £34,500

Simba DTX 3m 2010 good machine, good discs & packer

Great Plains TL300 3m very nice machine, new points, wings & shins, 2014 Stock No FG11609 £8,950

Stock No FG11897 £10,950

This is a small selection of our machinery... we have over 300 machines in stock 218 www.farmads.co.uk July 2019

fg_class_july_19.indd 218

27/06/2019 12:00

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 66379

£1 8, 00 0

2015 Case Magnum 315 CVX

2008 Massey Ferguson 7485 Tier 3

2015 New Holland T7.200 Power Command

Find the most desirable stock at

£2 2, 00 0

VALTRA: 2014 T183 Direct, 7850hrs, 50kph, f/linkage & PTO, Power Beyond, 70% tyres, immaculate ...............POA Track Marshall 120, year unknown, hrs unknown, Ford engine, r/PTO, 60-70% undercarriage ................................................ £7,000

DUE IN:

£3 8, 50 0

TRACK MARSHALL:

2015 New Holland T7.200 Range Command

2014 New Holland T7.200 c/w Q66 loader

2013 New Holland T7.210 Power Command

2014 New Holland T6.160

2014 John Deere 7290R

PO A

ENGINES: New CNH engines to fit Tier 3, Maxxum 115 & TSA 115 TYRES: PRICES YOU WILL NEVER GET ANYWHERE ELSE! 440/65x28 Continental (2), 480/65x28 Continental (9), 420/70x24 Continental (20), 380/70x24 Trelleborg (28), 380/70x24 Firestone (12), 320/85x24 Continental (5), 340/85x24 Firestone (6), 13.6x24 Pirelli (12), 14.9x24 Pirelli (8), 540/65x30 Continental (4), 480/70x34 Continental (8), 540/65x30 Firestone (6), 340/85x38 Firestone (4), 650/65x42 Nokian road tyres (4), 520/70x34 Continental (18), 480/70x34 Continental (15), 460/85x30 Firestone (6), 20.8/46 (5), 480/95x50 (1), 650/75x38 (2) Continental, 650/65x42 Continental, 600/65x38 (1) Continental, 520/70x38 (1) Continental, 480/70x34 (18) Continental, 420/85x34 (2), 710/70x38 (1), 650/65x38 (2), 600/65x38 (1), 480/80x42 (1)

PO A

NOW IN:

We are expecting more tractors to arrive in our yard shortly – Keep an eye on the website!

2012 New Holland T7.200

2003 New Holland TM130 c/w Q65 loader NEW

2014 John Deere 6190R

£5 8, 00 0

£7 0, 00 0

2017 Case Puma 240 CVX

2012 T7.200, 7009hrs, 200hp, 50kph, a/brakes, f/ axle & cab susp, f/linkage, full p/shift, Power Command, Sidewinder, f/tyres 540/65x30 90%, r/tyres 650/65x42 15%, been on hire no problems ..................................................... £32,000 2015 T7.200 Power Command, 5198hrs, 200hp, 50kph, a/brakes, f/axle & cab susp, f/linkage & PTO, full p/shift, mid mount valves, creep box, Power Beyond, 600/60x28 30% Michelin, r/ tyres 710/60x38 35% Michelin..................... £43,500 2013 T7.210 Power Command, 6918hrs, 50kph, a/ brakes, f/axle & cab susp, f/linkage & PTO, hyd top link, Power Beyond, Guidance ready, 3 spd PTO, c/control, mid mount valves, exhaust brake, f/tyres 540/65x30 25% Goodyear. r/tyres 650/65x42 40% Goodyear ........................... £38,500 2014 T6.160, 4442hrs, 160hp, 40kph, f/axle & cab susp, f/linkage, semi p/shift 16x16 trans, f/ tyres 480/65x28 60% r/tyres 600/65x38 70% Michelin Original, immaculate....................... £37,500 2013 T7.235 Power Command, 5604hrs, 235hp, 50kph, a/brakes, f/axle & cab susp, f/linkage, full p/shift, exhaust brake, mid mount valves, f/tyres 540/65x30 30% Continental, r/tyres 650/65x42 50% Continental ......................... £39,500

2013 New Holland T7.235 Power Command

2014 7290R, 7672hrs, 290hp, 50kph, a/brakes, f/axle & cab susp, f/linkage, continuously variable, leather trim, 5 spool valves, LED work lights, 2 f/spool valves, f/tyres 600/70x30 45% Michelin, r/tyres 650/85x38 50% Michelin ...........POA 2014 6190R, 6036hrs, 190hp, 40kph, f/axle & cab susp, f/linkage & PTO, continuously variable, c/ control, GreenStar ready, f/tyres 16.9x30 20% Continental, r/tyres 20.8x42 30% Continental ........POA 2015 7270R, 6519hrs, 270hp, 50kph, a/brakes, f/weights, f/axle & cab susp, continuously variable, Isobus, GreenStar ready, electric mirrors, f/tyres 600/70x30 70% Michelin, r/ tyres 650/85x38 60% Michelin..................... £58,000

2015 John Deere 7270R

£7 ,0 00

PO A

2014 Case Puma 160 CVX

NEW HOLLAND:

£3 2, 00 0

£3 7, 00 0

2018 Case Puma 185 c/w Case LRZ160 loader

2008 7485 Tier 3, 13309hrs, 170hp, 50kph, f/axle & cab susp, a/seat, f/linkage & PTO, a/brakes, Isobus ready, Data Vision, 4 finger tip spools, c/control, f/tyres 420/85x34 40% Michelin, r/ tyres 480/80x52 10% Michelin..................... £18,000

£4 3, 50 0

£7 6, 00 0

MASSEY FERGUSON:

JOHN DEERE:

£3 8, 50 0

2013 Case Puma 215

2003 TM130 Range Command, Quicke Q65 loader (as new), hrs unknown, 130hp, 40kph, cab susp, semi p/shift, new Dromone PUH, f/ tyres 480/65x28 1 70% 1 20% BKT, r/tyres 600/65x38 30% BKT, some rust on bonnet otherwise v tidy ........................................... £22,000 2015 T7.200 Range Command, 6615hrs, 200hp, 50kph, a/brakes, f/axle & cab susp, f/linkage & PTO, semi p/shift, mid mount valves, Power Beyond, f/tyres 540/65x38 25% BKT, r/tyres 650/65x38 25% Michelin ............................. £38,500

Buy and sell online — www.farmads.co.uk

£3 7, 00 0

2014 Case Magnum 340

2014 Magnum 340, 2728hrs, 340hp, 50kph, a/brakes, f/wts, f/axle & cab susp, a/seat, full p/shift, Accuguide, 5 r/spools, Power Beyond, f/tyres 600/70x30 60% r/tyres 800/70x38 35% Michelin..POA 2013 Puma 215, 6650hrs, 215hp, 50kph, a/brakes, f/weights, f/axle & cab susp, full p/shift, 4 spd PTO, f/weight block, f/tyres 540/65x28 80% BKT, 650/65x42 90% BKT ............................ £37,000 2018 Puma 185 with Case LRZ160 loader, 1461hrs, 185hp, 50kph, a/brakes, f/axle & cab susp, f/ linkage, full p/shift, ABS, full guidance, mid mount valves, mechanical spool valves, f/tyres 540/65x30 80% 650/65x42 85% Michelin.... £76,000 2014 Puma 160 CVX, 5382hrs, 160hp, 50kph, a/brakes, f/axle & cab susp, f/linkage, continuously variable, mid mount valves, Power Beyond, f/tyres 480/70x30 0% r/tyres 580/70x42 0% Trelleborg ............................. £37,000 2017 Puma 240 CVX, 3730hrs, 240hp, 50kph, a/ brakes, f/axle & cab susp, f/linkage & PTO, continuously variable, Accuguide ready, mid mount valves, deluxe seat, spool valve fender control, c/control, f/tyres 600/65x28 1 tyre 50% 1 tyre 30% r/tyres 650/75x38 70% Michelin ........POA 2015 Magnum 315 CVX, 3332hrs, 315hp, 50kph, a/brakes, f/axle susp, f/linkage & PTO, continuously variable, full Accuguide, PUH, f/tyres 600/70x38 80% Michelin, r/tyres 710/70x42 60% Michelin ............................. £70,000

£3 7, 50 0

PO A

CASE:

£3 9, 50 0

Tel: 01580 291271 • Mob: 07836 723944 • sales@markhellier.co.uk

Track Marshall 120 year unknown

www.markhellier.co.uk July 2019 www.farmads.co.uk 219

fg_class_july_19.indd 219

27/06/2019 12:02

Chris

66446

A.T. HOUGHTON

07795 113312

Gilly

Agricultural Engineers

07809 406040

Saddington Road, Nr SHEARSBY, Leics LE17 6PX

BALE GRAB available brackets, JCB Q-fit, compact, Manitou, Merlo, Matbro, Euro 8, Bobcat, Trima, Cat, blank £600

WOODCHIPPER AT145KZ hydraulic driven, twin feed towable mower, 22hp engine, roller, suitable for 30–110hp cast iron flails, electric start tractor £2,125 £1,750

New machinery in stock Deutz 5125 demonstrator, c/w Stoll loader Deutz 6165 powershift demonstrator Deutz 6215 TTV demo unit Kverneland 2832 mower 3.2m Kverneland 3332 mounted mower conditioner 3.2m Kverneland TAT 8452 4 rotor tedder Kverneland TAT 8576 6 rotor tedder Kverneland TAR 9580 C twin rotor rake Kverneland 5 furrow LB Variwidth 300hp headstock Kverneland 2832 mounted mower Kverneland FRO flail grass topper Redrock 5’10” silage block cutter Redrock 20t industrial dump trailer Redrock 24t tri-axle low-loading trailer McHale V6600 round baler, new in stock, braked axle McHale 991EB bale wrapper, fully auto McHale round bale handlers Opico 6m hyd folding grass harrows Teagle Tomahawk 8500SC feeder bedder Walter Watson 8.3m Cambridge rollers c/w breaker rings & paddles Walter Watson flat rolls 1- 12’x36”x14mm, 2- 10’x36”x14mm Walter Watson hydraulic rotating 12’ end tow flat roll Walter Watson bull beef feeders Moulton FY4 yard scraper Tanco round bale shear Kawasaki Mule Pro DX Kawasaki Mule Pro MX Kawasaki 750cc quad bike

AT120 AG200 EFGCH175/195 towable mower front & rear mower, hydraulic hydraulic side shift 15hp engine, cast iron flails, side shift, 540/1000rpm electric start £1,300 £2,000 from £1,500

EF175 light duty flail mower, suitable for 35-65hp tractors

£1,000

from £1,500

AGF 220 VERGE MOWER goes upright 90°, tilts 45°, suit 80-150hp

from £3,500

FREE DELIVERY INCLUDED ON SOME MODELS TO MOST PARTS OF THE MAINLAND UK The Woodpeckers • Gadds Lane • Wisbech • PE13 4TJ

KP Tractors 16 reg 05 reg 06 reg P reg 13 reg 08 reg 08 reg 04 reg 07 reg 05 reg 08 reg 07 reg 04 reg 11 reg 03 reg W reg 08 reg 11 reg 09 reg 05 reg M reg N reg N reg 09 reg 18 reg 15 reg D reg 08 reg L reg R reg N reg A reg J reg

Used machinery in stock Deutz 5110 & stoll loader 2015 Deutz 6180, 2014 Massey Ferguson 6499 Dynashift 2006 JD 2850 2wd Fendt 308 LSA Welger 220 Mastercut round baler Welger 435 2008 Claas Rollant 460, 1995, net wrap Bomford 3m heavy duty shaft drive topper Twyman 10’ ﬂail mower Einbock 6m grass harrows Lely Roterra 4m power harrow Dowdeswell 5 furrow reversible plough Kuhn 700G11 disc mower Kuhn MDS1141 QL fertiliser spreader Teagle 40/40 tub feeder/bedder Shelbourne Reynolds block cutter with JCB brackets Conor 12m feeder mixer Graham Edwards 14’ tri axle cattle trailer Polaris Prostar quad bike c/w roll bar road legal Twose 6.3m Cambridge rolls c/w paddles

01162 478 999

2015 11 reg 63781

Sales: Dave Grifﬁn – mobile 07712 509869 www.athoughton.co.uk

EFGC175/195 heavy duty flail mower, solid cast iron hammers

Tel 01652 Kevin mob 07796 Michael mob 07850

655777 957735 828639

Fountain House, 111 Scawby Road, Scawby Brook, Brigg, N Lincs DN20 9JX

MF 7718 4x4 Dyna 6 50K 280hrs MF 8480 4x4 FS CS Dyna VT 50K 5800hrs MF 8480 4x4 Dyna VT 6800hrs MF 8140 4x4 Dynashift 5500hrs MF 7618 4x4 Dyna 6 50K CS FS FL 2200hrs MF 6499 4x4 FS CS 50K 7950hrs MF 6499 4x4 FS CS 6800hrs new shape MF 6499 4x4 FS CS Dynashift 8100hrs MF 6495 4x4 FS CS 50K MF 6490 4x4 5000hrs MF 6490 4x4 CS 2600hrs mint condition MF 6490 4x4 FS CS 7000hrs MF 6490 4x4 Dyna 4 7000hrs MF 6475 4x4 CS 5000hrs MF 6290 4x4 FL PTO 8000hrs MF 6255 4x4 new MX loader 5800hrs MF 5460 2x4 MF 5480 4x4 FS CS 2600hrs MF 5475 4x4 CS Dyna 4 5800hrs MF 5455 4x4 6000hrs MF 3075 4x4 Dynashift with Trima loader 8500hrs MF 390 4x4 12-12 creep box 8000hrs Cat Challenger 35 10,000hrs Case 95 JXU 4x4 with power loader 4 in 1 5900hrs JCB 535/95 telehandler 4x4 joystick AC 922hrs 2yr JCB warranty JCB 541/70 4x4 joystick AC 4950hrs JCB 3CX digger 4 in 1 bucket 5800hrs Claas 816R Ares 4x4 6500hrs Case 7130 Magnum 4x4 8000hrs Ford TS100 4x4 8500hrs Ford 7840 SLE 4x4 8000hrs Ford 5610 2x4 Ford 5610 AP cab 2x4 3500hrs Generation 3 Genie lift 16m JPM 15t dump trailer DF404 Landlegend 4x4 loader 255hrs Set of John Deere wheels 700/55/34, 500/60/26.5

64378

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

All prices + VAT

email: kptractors1@outlook.com fax: 01652 651476 www.kptractors.co.uk

220 www.farmads.co.uk July 2019

fg_class_july_19.indd 220

27/06/2019 12:04

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 226 IFOR Williams pickup canopy, with hinged mesh tailgate, 2.13m long, 1.4m wide, good condition. £110+VAT. R Tarver Tel 07484 823124/01386 462707 (Worcs)

VEHICLES (cont)

MITSUBISHI L200 Raging Bull pickup, 112,000mls, 2009, 12mths MOT, 5 speed manual, tow bar, lockable cover, factory fitted alarm & hands free kit. M Devonshire Tel 07711 764249 (Beds)

COUNTRY VEHICLES

IFOR Williams canopy for Toyota Hi-Lux Active. £225. G Swindells Tel 07974 695924/01909 509541 (Notts)

LWB, 16 reg, 2L, metallic grey, electric windows, bluetooth, rear park, detachable tow bar, alloy wheels, ply lined. £12,995+VAT. R Hopkinson Tel 07976 424263 (Lincs)

Land Rover Defender 110

1996 Carryall Club Car buggy,

TOYOTA Hilux Invincible, 2015, 49000mls, leather seats, sat nav, climate control, new tyres, full MOT. £14,500+VAT. E Clark Tel 07879 698807 (Norfolk)

200 TDI, 86C ............. £3,495 Land Rover Defender 110 hard-top, 91J, 65,000 miles, blue ........................... £4,995

Dave Smith:

mobile 07973 139483 home/fax 0115 965 2204

TOYOTA Hilux 3.0 D-4D Invincible double cab pickup, black with black leather, auto, only 57,172mls with FSH, 12mths MOT, sat nav, reversing camera, E/W, E/M, top spec vehicle in excellent condition, meticulously maintained. £15,750+VAT. P Skinner Tel 07711 405100 (Northants)

VW Transporter van, T-LN,

LAND Rover Discovery 3

Black high spec HSE, MOT in May, in daily use, uprated tow hitch, had an oil change, new brakes, LED lights, chipped performance, rebushed, file of invoices, no dents, a few scratches, incl some key marks. £6,000 no VAT. J Hatton Tel 07803 721236 (Essex)

2015 Toyota Hilux double cab,

only 7800 miles, usual Active spec, air con, tow bar, electric socket, load liner & central locking, in as new condition for the price of a second hand truck, new MOT & drives very well. £13,000+VAT. B Robinson Tel 07740 683113 (Glos)

RENAULT Master, 61 reg,

LL35DCI 125 diesel, chassis, cab, FWB, engine needs attention/replacing – timing chain broken, would take horsebox, coldroom or camper van, chassis 13', 2290cc, MOT 29Oct19, sold as seen, vgc except eng, hence £2,500+VAT ono. J Hurd Tel 01985 840260 (Wilts)

NISSAN Navara Tekna, 2010

(60 reg) 2.5DCi, double cab pickup, silver, black leather, r/snug top, load liner, 107K miles, vgc, had Nissan recall new r/chassis, 17" alloys, more photos on request, used for soil sampling in East Anglia. £7,500 inc VAT. C Long Tel 01502 561657 (Norfolk)

2008, 56000mls, full service history, MOT till January, very tidy Land Rover, aluminium top to fit. £12,000+VAT ono. G Beazley Tel 07875 503966 (Shrops)

LOW mileage Land Rover Discovery 2 Landmark, 85,123 mls, lovely to drive, black, 2.5 Tdi 5, manual transmission, electric mirrors & windows, heated passenger seats, 7 seater, cream leather, Grabber tyres, electric tow bar, twin sunroofs. S Moore Tel 07720 221704 (Glamorgan)

LAND Rover Discovery 4,

2.7TD V6 GS 5dr silver, manual, full service history, 2 keys, tow bar, CD player, serviced & MOT, new rear brake discs, 4 General Grabber AT3 tyres put on 2018, 2 owners, 2009 (59 reg), 131,560 miles. £6,750. E Streeter Tel 07425 795403 (Essex)

LAND Rover Discovery 3 Commercial XS, with rear seats, 2007 57 reg, 110k miles, metallic silver, climate control, cruise control, bluetooth, heated screen, towbar, good condition. £7,000+VAT. L Hull Tel 07908 861993 (Essex)

FORD Ranger Thunder double

cab, 57 plate, 118000 miles, nearly new all terrain tyres, 12mths MOT. £4,000. J Wood Tel 07743 242193 (Northants)

51,000 miles, FLRSH, 2 owners from new, full leather, 7 seater, h/duty towing pack, privacy glass, immaculate condition, 1yr extended LR warranty (new buyer to continue payments). £29,995 ovno. W Mallon Tel 07771 972092/01362 687260 (Norfolk)

CARRYBOY hard top canopy,

LAND Rover Defender 08, LWB,

71K, full service history, front winch, full roof rack, work lights & beacons, tow bar, inside racking, inverter, 1st class condition. R Hopkinson Tel 07976 424263 (Lincs)

VINTAGE & CLASSIC FORDSON Major, tidy tractor. £2,650 ono. Hunt Bros Tel 07702 734715(T) LATE Victorian/early Edwardian stable stall, dismantled, out of a country house. £1,000. E Calcott Tel 01827 62265 (Staffs) PTO pulley for 135. £40. D Griffiths Tel 01437 751212 (Pembrokeshire) LISTER single row tedder. C Brown Tel 07979 632866/01255 870253 (Essex) MASSEY Ferguson 65 Mk2 Multipower, fire damaged, but complete, seized, stored undercover in Hertfordshire. Offers. M Gardner Tel 07772 170938 (Suffolk)

CHERISHED personal number plate, A403 KAY, on retention 10yrs, assignment fee £80 paid, ready to go straight on to a vehicle. £1,000. E Calcott Tel 01827 62265 (Staffs)

2015 Discovery 4 SE Tech,

DEFENDER 90 DTCi 2.4 pickup,

petrol engine, c/w manual, vgc. £1,725. M Robson Tel 07967 139678 (N Yorks)

74'' long x 60'' wide, fits Mitsubishi L200 4Work Club cab Dl-D, black with sliding clear window at front & black tinted, locking rear window, good condition. £250. M Ruffles Tel 07887 773727 (Norfolk)

www.farmads.co.uk

DAVID Brown 885 with loader, very good tyres all round, mudguards are homemade but very strong, good little tractor, got bonnet for it as well. L Wilderspin Tel 07938 565851 (Cambs)

MARSHALL 502, Trima loader, A reg, needs engine. £2,650 ono. Hunt Bros Tel 07702 734715(T)

Buy and sell online — www.farmads.co.uk

1997 Land Rover Defender 90 Hard Top. S Hill Tel 07881 786690/01603 759536 (Norfolk)

TOYOTA Hilux Invincible, manual, 2013, FSH, 1 previous owner, 101k, just been serviced & MOTd. B Scott Tel 07780 546127 (Norfolk)

57-65531

FORD Ranger, 2004 reg, 159000 mls, MOT October 2019, 4 door model, Ifor Williams rear canopy, towbar, good condition for age. £1,750 ono. B Handley Tel 07821 273987 (Lincs)

DAVID Brown VAK2, petrol/ paraffin, 1948, non runner, good tyres, need to replace rear rims & petrol tank. M Gardner Tel 07772 170938 (Suffolk)

RANSOMES TS82 plough, 2 furrow reversible, good working order, good metal & no cracks or welds. £400 ono. A Kerfoot Tel 07539 933777 (Lincs) FOSTER threshing drum, believed to be November 1939, c/w Ogle straw elevator. £2,000. C Sheldon Tel 07836 277899 (Notts)

July 2019 www.farmads.co.uk 221

fg_class_july_19.indd 221

28/06/2019 12:49

VINTAGE & CLASSIC (cont)

PLEASE

EPLY WHEN R ISEMENTS T R E V D A TO

1970 Ford Force 3000 Tractor FORDSON, 1940, petrol/

original working condition, 3700 genuine hrs, PAS/PUH, 4 new tyres, V5, road reg, barn stored, no VAT

IH475 hydraulic pump, less than 10hrs use, as new. £175+VAT ono. J Nott Tel 07957 146325 (Norfolk)

HYDRAULIC drop arm for IH895/4230. £130. D Grifﬁths Tel 07790 982029/01437 751212 (Pembrokeshire)

Clive Dibden 07831 484365 Hampshire

length 5000mm, width 1250mm, height 870mm, top is 8mm thick plate, adjustable bolts in feet. £200 no VAT. D Ivens Tel 07969 877834 (Northants)

EMPTEEZY oil drip tray, 1230 x 1500mm, good condition. £125 no VAT. D Ivens Tel 07969 877834 (Northants)

4yrs, needs restoration, been on farm for 50yrs. Offers. A Davis Tel 07759 914875 (Essex)

Portable Rotary

FERGUSON TEF20 diesel, very

commercial vehicle lift

original, in good working order, c/w roll bar, has original V5 document, reluctant sale, registration: ORM 415. £2,750. K Bristow Tel 01363 772965 (Devon)

DIGITAL scales, non printing, in good working order, max weight 15kg, min weight 0.10kg. £75+VAT. A Dockerill Tel 01223 835029 (Cambs) TRAILED Martin cultivator.

J Crooks Tel 07711 137195/07747 771769 (Suffolk)

MASSEY Ferguson spring tines, 14', Aldham. £300. N Cobbold Tel 07776 219237/01473 823167 (Suffolk)

WALTHAMBURY auto weigher. R Dunham Tel 07831 350871 (Beds)

WORKSHOP EQUIPMENT

PLASTIC storage bins, W

£5,000

Lifts 28.8 tonne, 3 phase

01493 750999

100t capacity, requires hydraulic power pack, or tractor to operate

62-66576

trailer, circa late 1950s, free to good home, collection only from Devizes, Wiltshire. C Hoddinott Tel 01380 722016/07711 290481 (Wilts)

MASSEY Ferguson 40 industrial loader (based on 135), original condition, owned by same family for 28 years. £2,150 no VAT. D Hastings Tel 07704 000718/01953 798944 (Norfolk)

TRACK Marshall 70 & 55, barn stored for 25yrs, TM55 tracks & steering clutches as new, runs & drives perfect, cab & spool valves ﬁtted, paint work all original. £1,500. A Kerfoot Tel 07539 933777 (Lincs)

PROFILE table, manual control,

CABLE drum stand, good strong frame, 6 available. £40 each no VAT. D Ivens Tel 07969 877834 (Northants)

01530 229686 or 07831 113316

WOODEN based ﬂat bed tractor

MILLING machine, upright, ﬂoor standing. R Galletly Tel 07726 856243 (E Sussex)

OXFORD oil cooled arc welder, 400amp. R Galletly Tel 07726 856243 (E Sussex)

ALLIS Chalmers B, 3 speed, 4 cylinder petrol engine. £1,100. P Starsmore Tel 07753 936466 (Northants) FOWLER VF crawler, 1956, been in family since new, running 18 months ago, stored in Hertfordshire. M Gardner Tel 07772 170938 (Suffolk)

200mm, L 280mm, D 140mm, large quantity available. £1 each no VAT. D Ivens Tel 07969 877834 (Northants)

www.jmurrell.co.uk

Heavy duty POA workshop press

THATCHING ladder, sack lifter & barn scales. S Jones Tel 07796 001370 (Norfolk) WINDOW screen glass in frame for Fitzmeier cab. S Bane Tel 07826 306935 (Norfolk) PTO pulley for IH 434. £40. D Grifﬁths Tel 07790 982029/01437 751212 (Pembrokeshire) FERGUSON 3t tipping trailer, complete, in as used condition. £375+VAT. M Seabrook (BD Seabrook & Son) Tel 07754 165841/01621 860382 (Essex)

WORKBENCH, good condition,

WEIGHING EQUIPMENT CATERPILLAR D2, not run for

RANSOMES 801 combine, with Perkins engine 4/107, for parts. £250. D Grifﬁths Tel 07790 982029/01437 751212 (Pembrokeshire)

ARCGEN fast tow mobile welder, 3cyl Kubota engine, max current 250amp, auto idle, two 110v outlets, c/w welding leads. £1,400. A Lee Tel 07836 773893/01440 820954 (Suffolk)

62-66543

POA

parafﬁn, in rally condition, but block cracked due to frost. G Warman Tel 01473 830308 (Suffolk)

58-66604

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

MENTIO

E S GUID ING FARMER

www.midlandsagriplant.com

COLCHESTER lathe 4"/5" hole, bed gap 2'. R Galletly Tel 07726 856243 (E Sussex) SEALEY wheel changer, castor wheels, rollers to rotate wheel, ideal for lorry or trailer wheels, will ﬁt into back of truck or van without dismantling. £80 ono. R Jones Tel 07785 583192 (Norfolk)

2 gas torches so can cut 2 pieces at the same time if required, c/w benches to hold the steel to be cut, no longer needed & I need the space. £390 ono. B Poulson Tel 07850 594925/01284 828371 (Suffolk)

Buy and sell online

www.farmads.co.uk

STEEL plate rack, heavy duty. £100 no VAT. D Ivens Tel 07969 877834 (Northants)

222 www.farmads.co.uk July 2019

fg_class_july_19.indd 222

28/06/2019 13:01

FARMERS - Advertise your â&#x20AC;&#x2DC;for saleâ&#x20AC;&#x2122; and â&#x20AC;&#x2DC;wantedâ&#x20AC;&#x2122; on-farm machinery for free. See coupon on page 226

WANTED

59-63505

HAY turner to do our 5 acre paddock, doesn't need to be anything fancy, just in working order, can collect, based in Essex. C McCracken Tel 07899 951240/01206 230136 (Essex)

59-64430

rgb4x4.co.uk

01277 822001 ASALIFT onion hoover with rotating bar & paddle. D Brown Tel 07710 316205/01487 822280 (Cambs)

Norfolk farmer & contractor wants good quality Fendt Tractors

WANTED

JCB 3XC 4x4 Sitemaster or similar

Email your machine to

farm@murrell1.plus.com or call

07766 216100 Norwich, Norfolk

www.jmurrell.co.uk

POINTS for Cooper Topsoiler subsoiler (type held on by countersunk hex socket screws). G Howell Tel 07903 089391/01728 723683 (Suffolk)

59-66527

07770 692891 www.jmurrell.co.uk

TELEHANDLER/LOADER required, up to ÂŁ8k. P Brewer Tel 07540 567063 (Essex) ROLLERS, 12m folding, must be 24â&#x20AC;? rings & good condition. H Brown Tel 07764 477766 (Cambs) FRONT press, 1.5m wide. H Taylor Tel 07763 125574 (Bucks)

WE are Kent beekeepers, we currently have a few hives in Kent & W Sussex & are looking for more locations to house some bees. We are part of a coop working together to cultivate bees with the aim of creating products, inc honey, mead, candles, etc. S Dore-Boize Tel 07921 585968 (Kent)

WANTED 1965â&#x20AC;&#x201C;2012

Covering East Anglia

Tel: 077859 37779 or 01953 454462

SANDERSON Teleporter 622 cab glass, for door & front side, side window, plus front guard to cover battery. J Bunning Tel 07931 331953 (Cambs) FORDSON Super Major pick up hitch. M Crosby Tel 07876 196476 (Essex) TRIMBLE Ezsteer 500 + Ezboom or similar, for sprayer section control. D Treharne Tel 07719 697455 (Northants) CLAAS combine, 15/17' cut, in good condition. Around ÂŁ15,000. P Beales Tel 07584 189359/01284 828360 (Suffolk)

iron wheel in the following measurements: rim 2.5" wide, outside diameter 28.5". C Parker Tel 07860 802389 (Essex)

STEERAGE hoe, 4 row, good condition preferably. P Mount Tel 07530 676354/0116 269 2526 (Leics) SMYTHE drill wheels, wooden, must be sound â&#x20AC;&#x201C; no rot or worm. M Fordham Tel 01799 530252/07871 986858 (Essex)

WANTED Used diet feeders any size, any make

Gerry Conlon

JCB TELESCOPICS 1998â&#x20AC;&#x201C;2012 BUNNING SPREADERS ROUND BALERS - MCHALE, CLASS, KRONE & WELGER

SCRAP METAL All types of scrap combines, sugar beet harvesters, tractors & machinery

WOODEN potato chitting trays, ideally Cambridgeshire & surrounding areas. R Butcher Tel 07834 039826 (Cambs)

FORD/NEW HOLLAND TRACTORS

S Gray Recycling

AM in need of one cast Email details to farm@murrell1.plus.com

www.ground-control.co.uk

JOHN DEERE TRACTORS 4050 THROUGH TO 4955 sales@robertwraightltd.com

07836 540559

59-65015

FRONT/REAR ďŹ&#x201A;ail mower, 2.35m wide, Ortolan preferred. J Doe Tel 07860 314240 (Suffolk) RUBBER ďŹ&#x201A;ails for Ransomes potato shaw pulveriser or similar. W Jack Tel 07976 662725/01294 832566 (Ayrshire)

Farmer & contractor requires 12â&#x20AC;&#x201C;20t agri dump trailers

Email details to farm@murrell1.plus.com

Call James 07770 692891 www.jmurrell.co.uk MOUNTED sprayer, 20/21m, with rate controller, in good working order. P Beales Tel 07584 189359/01284 828360 (Suffolk) AMAZONE 3m steel toothed packer roller, to ďŹ t KE Series power harrow. R Hanton Tel 07860 792976 (Norfolk) VADERSTAD TopDown, 4m wide, in good order. D Brown Tel 07710 316205/01487 822280 (Cambs) 6D 6 cylinder engine to ďŹ t Fordson Major in gwo. S Hill Tel 07881 786690/01603 759536 (Norfolk) RING rolls, 6m, hydraulic folding. H Taylor Tel 07763 125574 (Bucks) SIMBA 4m SL or SLD, in good order. D Brown Tel 07710 316205/01487 822280 (Cambs) 24-METRE trailed sprayer, min 3300L tank, up to ÂŁ5,000 value. S Hill Tel 07881 786690/01603 759536 (Norfolk)

07721 442979 gconlon@enegis.co.uk

ALLMAN area/speedometer which drives off front wheel of tractor. I Steel Tel 07768 724901 (Essex) LOG grab with JCB ďŹ ttings for 8t digger. P Maddever Tel 07778 156663 (Suffolk) CAMBRIDGE roll. J Doe Tel 07860 314240 (Suffolk) BATEMAN Hi-Lo, with JD engine, or RB15, must be in good condition. P Oliver Tel 07733 228720 (Suffolk) LARGE back wheels & bonnet for Fordson Major. S Hill Tel 07881 786690/01603 759536 (Norfolk) MASCHIO 4m power harrow with toothed packer, or just the toothed packer & scrapers. S Bartle Tel 07884 238552 (Notts) 34X11.75-14 farm trailer tyres, ex aircraft type. M Crosby Tel 07876 196476 (Essex)

WANTED

Used Tractors and Good Clean Farm Equipment

ATKIN FARM MACHINERY

NORWICH ROAD DEREHAM

Tel: Dereham (01362) 692104/637332

www.atkin-farm-machinery.co.uk

KVERNELAND 5 furrow plough, hyd variwidth, in good condition. P Beales Tel 07584 189359/01284 828360 (Suffolk) TREE shear for 3t digger. J Doe Tel 07860 314240 (Suffolk) FERTILISER spinner, 12â&#x20AC;&#x201C;24m spread, no electrics, older, simpler machine, but must be in useable condition. H Taylor Tel 07763 125574 (Bucks) JOHN Deere Gator 855 passenger side door. H Brown Tel 07764 477766 (Cambs) SECONDHAND rooďŹ ng sheets. S Hall Tel 01473 743702 (Suffolk)

Buy and sell online â&#x20AC;&#x201D; www.farmads.co.uk

01353 861694 07968 661115

Do you have a TRACTOR or TELEPORTER? Can you help with SNOW CLEARANCE? Local sites to you - FAST PAYMENT

www.farmads.co.uk

David Smith

0845 180 1272

Caring for our Environment

59-65552

Top Cash Paid+VAT

snow@ground-control.co.uk

59-66376

â?&#x161; Combines â?&#x161; Sugar Beet Harvesters â?&#x161; Tractors â?&#x161; Trailers â?&#x161; Cars â?&#x161; Vans â?&#x161; Lorries â?&#x161; Trucks

59-62248

59-66528

WANTED

59-66526

SCRAP

OPICO 9t mobile dryer, must be in good working order, Yorks, Humberside, Lincs areas. D Jackson Tel 07889 956744 (N Yorks) OLD York stone for patio. D Brown Tel 07710 316205/01487 822280 (Cambs)

59-63321

SMALL Vicon Varispreader, for grass seed, etc, must be good condition. D Murrell Tel 07850 724139 (Norfolk)

July 2019 www.farmads.co.uk 223

fg_class_july_19.indd 223

27/06/2019 14:55

RECRUITMENT and About People Tel: 01473 691888 email: classified@farmersguide.co.uk www.farmersguide.co.uk/situations-vacant

66622

www.wilfredscruton.co.uk

Experienced Agricultural Service Technician – Yorkshire

We're a long-established, family-run agricultural machinery dealer based in North Yorkshire, employing around 60 talented individuals. We’re looking to recruit a meticulous and self-motivated Service Technician to join us at our Riccall depot (between York and Selby). Daily duties include servicing, repairing, fault-�nding and diagnostics both from our well-equipped workshop and on site. The successful applicant will preferably have more than 4 years of technical experience working with agricultural machinery. We also welcome applications from technicians who have worked on similar equipment with transferable skills, providing the applicant is able to deliver quality workmanship and adaptable enough to learn. So if you don't currently have agricultural experience but have a thorough understanding of engines, hydraulics and other mechanical applications we'd love to hear from you.

Essential Skills, Duties & Quali�cations:

• Perform pre-delivery set up on new or used equipment • Support Manufacturers’ Service Specialists when required • Ability to mentor apprentices • Ability to use standard computer applications and internet functions • Ability to operate vehicles and equipment used for diagnostic purposes • Excellent communication skills at all levels • Ability to work both individually and in a team environment • Full UK driving licence • Ability to work extended hours (seasonal) and weekends • Ability to complete online & classroom-based training

• The ability to perform repairs and required maintenance using special tools and equipment following approved technical procedures • Complete all reports and administration required to a high standard and in a timely manner • Maintain a clean work station and assist with overall workshop organization • Follow all safety rules and regulations in performing work assignments • Participate in online and classroom-based training required for the development of skills and knowledge • Perform diagnostics and repairs in the �eld as required

In return we o�er a competitive rate of pay which will be determined by experience along with additional bene�ts including a workplace pension and access to childcare vouchers*. * Eligibility to join scheme will depend on personal circumstances, but we are happy to facilitate wherever possible.

If you're interested in becoming part of our team, please email your CV to laura@wilfredscruton.co.uk along with a brief covering letter or email stating your interest in the role and why you feel that you'd be suitable.

Need to fill a vacancy?

Find Staff – Find a Job! www.4xtrahands.com 62808

Tractor Drivers, Sprayer Operators, Fencers, Livestock Workers and all Rural Staff

01284 747292 admin@4xtrahands.com

Need to advertise it before our next issue?

NOT A PROBLEM! 62814

Recruitment and About People Email: classified@farmersguide.co.uk

Farmers Guide

Our new Situations Vacant page on the Farmers Guide website is continually updated allowing you to advertise for the right person at the right time for you. To see the current jobs online go to www.farmersguide.co.uk and click the link on the side bar. Just contact our Sales Team to advertise your position with us. You can, of course, still advertise on these pages in the usual way, with the added bonus that your ad will now also appear on the website. Ads posted on the website will run until the deadline stated (or for one calendar month from date of upload where no application deadline is specified)

224 www.farmads.co.uk July 2019

Recruitment pages.indd 224

27/06/2019 15:04

About People FMC strengthens commercial team

Alex Smith has been appointed Maschio service manager and UK technical support to cover Opico, HeVa, Sky, Strautmann and Maschio brands in East Anglia, Hertfordshire and Bedfordshire. Having a farming background led Alex to an agricultural engineering qualification, which was followed by a couple of years doing on-farm apprenticeships

FMC has further strengthened its commercial team following the appointment of Simon Francis as its new commercial technical manager in Scotland and the North of England. Simon brings over 20 years of technical expertise and agronomy knowledge. He joins FMC from UPL where he was commercial and technical manager. The company has also added to the commercial team with the appointments of Alison Casey and Karl Geary as key account managers. Alison has a proven track record with extensive commercial

where he gained a valuable insight into practical farming. For more than 20 years Alex has worked for a well-known supplier of agricultural parts, working in most functions from sales and demonstrations to most recently being responsible for product development. “Joining Opico is a new and exciting challenge for me. It has given me a shift in focus from my years working primarily with parts, to resolving issues with complete machines,” said Alex.

After-sales and design appointments Manufacturer Claydon Drills has announced two key appointments to its after-sales and design departments. After-sales manager Robert Culbert is responsible for all aspects of aftersales service and training. Robert has spent most of his career in the automotive trade and worked all over the world including Saudi Arabia, Kuwait, Beirut and Malta. Returning to the UK, Robert joined agricultural machinery dealer Oliver Landpower in Luton and spent three years with the company before returning to Malta to join a dealership specialising in Fiat Group brands. John Long (above right) has taken on the newly created role of

design engineer and compliance coordinator, to ensure that the company’s products meet the legal and technical requirements in markets around the world. John is also a design engineer, assists the company’s design and manufacturing director Oliver Claydon and is responsible for integrating all aspects of production. John’s career started in the RAF, where over 15 years he trained as an engineer and was involved in weapons technology. Later he worked for manufacturers in design roles before becoming operations director for a manufacturer. Before joining Claydon John was involved in design contract work, for companies in Cambridgeshire and Hertfordshire.

Product marketing specialist David Redman has recently taken on the role of product marketing specialist for high horsepower

tractors at New Holland Agriculture, after over 20 years (11 of which within the CNH Industrial group) spent in the agriculture industry as area sales manager for the south east of England.

Movers and shakers Do you know of someone who is on the move in the agricultural industry? Whether they are starting a completely new role, a promotion within a business or perhaps a retirement after many years of dedicated service, let us know and we will do our best to include it on our popular ‘About People’ pages. Send in no more than 150 words and a (head and shoulders) picture of the person in question to (email) dominic@ farmersguide.co.uk.

and technical experience having worked as an agronomist for Agrovista for over 10 years and subsequently a business development manager for Arysta LifeScience. Karl joins FMC from BASF where he was a key account manager and brings with him considerable experience working in the crop protection, fertiliser, seed treatment and bio-pesticide sectors. “Strengthening the UK team through employing talented people with first class commercial and technical experience, demonstrates FMC’s commitment to UK agriculture and our customers,” says FMC UK/IE country leader Simon McMunn. “These appointments, alongside the current team, the current portfolio and the excellent pipeline, play a large part in helping secure further successful progression of FMC in the UK and Ireland,” he adds.

Marketing management role for Tarek Manitou UK has announced the appointment of Tarek Husain as marketing manager for the UK and Republic of Ireland. “With 25 years marketing experience in both B2B and B2C marketing, excellent communication, branding and relationship building skills, Tarek’s experience will help with our

continued growth and raise the profile and awareness for the Manitou and Gehl brands in the UK and ROI,” said Manitou managing director Mark Ormond. Prior to joining Manitou, Tarek worked for a large global engineering company that manufactures market leading spray painting and fluid handling equipment to Tier One automotive manufacturers, high end boat building, Formula 1 and other industries.

Advice role for Rose Rose Riby has been appointed to AHDB’s arable knowledge exchange team to work across the County Durham, Northumberland and Yorkshire region. She previously worked for plant breeder KWS UK in regional sales, covering the North and Scotland. In that role, Rose provided regional growing advice to merchants, agronomists and farmers. She is currently working towards her BASIS qualification having already completed her Foundation Award

in Agronomy and Certificate in Crop Protection IPM (Seed Sellers). AHDB Knowledge Exchange provides the first point of contact for growers and others involved in the industry looking to access levy-funded services. As well as events, resources and campaigns it also provides expertise on areas such as soils, rotations, benchmarking and integrated pest management. Rose joins the cereals and oilseeds side of the team and will run key initiatives, such as the Monitor Farm programme, as well as events in the North East region.

Recruitment and About People — www.farmersguide.co.uk/situations-vacant

New service manager and technical support

www.farmads.co.uk July 2019 www.farmads.co.uk 225

Recruitment pages.indd 225

27/06/2019 15:05

F fo A RE rf D E ar S m er s

Farmers Guide Something to sell or something you need?

Sell and source your used machinery and other requirements here. Include a picture free of charge with your ad* (usual cost ÂŁ14.40). The next issue of Farmers Guide will appear online at www.farmersguide.co.uk To guarantee your FarmAd appears in the August 2019 issue, we need to receive your advert by the 18th July 2019.

Ads are best submitted online at www.farmads.co.uk Or use this form and fax to 01473 691886 or post to: Farmers Guide, Parkside, London Road, Ipswich, IP2 0SS

FREE picture ads for farmers

This form must be signed

I certify that in placing this advertisement I am acting in a private capacity and not offering items purchased for the purpose of re-sale and not in contravention of the 1977 Business Disclosure Order.

Signed:........................................................................................................................................................................................ Address:................................................................................................................................................................................................................................................................................................................................ ...........................................................................................................................................................................................................................................................................................................................................................................................

County:............................................................................................................................................................................

Postcode:............................................................................................................Name (in caps):............................................................................................................................................................................................................................................................................................................................................................. Tel No/s:............................................................................................................................................................................................................................................................................... Email:....................................................................................................................................................................................................................................................

Please print clearly and take care with phone numbers Any comments or suggestions?

Tell us what you like best or what you would change in Farmers Guide.

Please circle how many people read your copy of Farmers Guide:

Other (

)

* For a limited period, all picture ads submitted will appear in the magazine free of charge (at our discretion), subject to space availability. FarmAds suspected of being non genuine or from individuals or companies we believe to be trading commercially will not be published.

FarmAd Coupon 2019.indd 1

28/06/2019 10:14

ÂŠ BAD Photography

The part you need when you want it!

l High performance axial fans and centrifugal blowers. l Engine cooling, hydraulics cooling, cab cooling. l Long life, reliable, robust. l No minimum order. l Next day delivery.

sales@spalautomotive.co.uk www.spalautomotive.co.uk tel: 01905 613 714 Untitled-1 227

21/06/2019 16:50

KL FROM

£3,150*

Superior and unique cutting action

FROM £1,560*

FROM £5,900*

FROM £5,700*

ASK ABOUT OUR PAY AS YOU FARM PLANS CALL 01386

49155 OR VISIT WEAVINGMACHINERY.NET

*PRICES EXCLUDE VAT

Untitled-1 228

21/06/2019 16:51