Farmers Guide June 2020

Page 1

June 2020 • Issue 490

FREE for farmers

Farmers Guide

Farmers Guide The Best of British Farming

Issue 490 June 2020

G N I L A B W A R T S R O

F 0%

! E L B A L I VA A E C N A IN

F P H T S E INTER

www.farmersguide.co.uk

0% Interest Hire Purchase available over 3 years on selected KRONE Square Balers ordered by 31st July 2020. KRONE UK Ltd are authorised and regulated by the Financial Conduct Authority. KRONE UK Ltd are a credit broker and JCB Finance Ltd are its preferred supplier finance. JCB Finance Ltd are authorised and regulated by the Financial Conduct Authority. Finance is restricted to business users only in the United Kingdom, subject to acceptance by JCB Finance Ltd. Terms apply. Visit www.krone-uk.com for full details.

1-2 front covers.indd 1

18/05/2020 12:32


A potato haulm desiccant for all varieties of seed and ware

USE PLANT PROTECTION PRODUCTS SAFELY. ALWAYS READ THE LABEL AND PRODUCT INFORMATION BEFORE USE. For further information on product hazard warnings, risk and safety phrases, consult the Belchim Crop Protection Ltd website. Gozai® contains pyraflufen-ethyl and is a registered trademark of Belchim Crop Protection

Technical enquiries: 01480 403333 | www.belchim.co.uk

Gozai-UK_ID603_v2.indd 1-2 front covers.indd 2 1

21/05/2019 11:14:49 15/05/2020 11:38


Contents Out & About..................................................................................................................................4 Comment: British dairy: How can we weather the storm? ......................................7 Grain & Fertiliser Advice...........................................................................................................9 News in Brief..............................................................................................................................10

34

Arable:

Understanding soil biology to build future farming resilience.....................13 Accurate weather data can improve farm and crop management............15 Dress for success................................................................................................................16 New seed treatment option for barley....................................................................20 Could farm saved seed work for you?......................................................................24 OSR Management: Securing the greatest returns at the least risk..............26 Early applied oilseed rape desiccant protects yield...........................................29 For the right variety, look at the whole package.................................................30 Agronomic research highlights flea beetle battling strategy........................32 New sugar beet varieties demonstrate breeder improvements..................34 Sugar beet genetics come to the fore.....................................................................36 Increased yield potential...............................................................................................38 Five ways Chilean sugar beet growing differs from the UK............................39 Plenty to consider for winter cereal varieties........................................................42 How to improve risk management in wheat........................................................45 Nozzle choice key for complete ear coverage......................................................46 Seed mix keeps conservation options open.........................................................48

New sugar beet varieties demonstrate important breeder improvements

53

Machinery:

Improving biodiversity on the farm..........................................................................22 Fuel for thought.................................................................................................................23 No need to check out competition as farm remains loyal to brand...........53 Dealer profile: Serving farmers for almost 200 years........................................57 Non-genuine parts blamed for poor initial drill performance......................64 Online, on-site farm sale is a first................................................................................66 Farm sale: Nottinghamshire auction sale draws the crowds.........................91 Cultivator shines on both shallow and deeper work........................................99 Upgrades improve penetration, mixing and chopping................................ 105

Cereals Showcase:

Event promises to deliver key features virtually..................................................69

Drainage & Irrigation:

No need to check out competition as farm remains loyal to brand

Power on the Land........................................................................................................ 113

Livestock: Maximising returns from autumn reseeds......................................................... 121 Mix consistency key to feed performance.......................................................... 124 New seed treatment gives brassicas a flying start........................................... 125 Agricultural contractors..................................................................................................... 126 Henry Brown’s Vintage Page............................................................................................ 130 Classified................................................................................................................................... 131 Recruitment, including About People......................................................................... 193

125

For FarmAds and general enquiries call 01473 691888 Published by Early Bird Farming Publications Ltd from its office at Parkside, London Road, Ipswich, Suffolk IP2 0SS. Tel: 01473 691888. Full contact details for staff can be found at www.farmersguide.co.uk. Original articles and advertisements created by Farmers Guide are copyright and are not to be reproduced in any form without the written permission of the Editor. No responsibility can be accepted by Farmers Guide for the opinions expressed by its contributors.

ISSN: 2053-5414

New seed treatment gives brassicas a flying start

NE

W

INTEGRATED BALER WRAPPER

Finance* & Special Offers Available

* Offer Available in Mainland U.K. Only. Terms and Conditions Apply. For Full Details Contact McHale.

For the Best Deals : Contact Kieran at 07850 373 145 June 2020 www.farmersguide.co.uk

3 Contents.indd 3

3

19/05/2020 14:30


With Farmers Guide editor Rachel Hicks and the team

1 Machinery editor David

Welcome to the June issue of Farmers Guide.

We’ve made it through another month in Williams has been practising social distancing lockdown, and hope all our readers are whilst out and about – this still keeping safe and well. month he was on-farm to At least the weather is being kind to us. In fact, report on the long-term after such a wet and miserable winter, this testing of a Claas Arion 440, which you'll be able to read has been a particularly warm and dry spring, which makes our about in our July issue. Drainage & Irrigation feature all the more timely – see page 113.

You may not be able to physically visit the Cereals Event this year, but the organisers say you won’t miss out on any of the content as all the key features will be delivered in a virtual sense, says event director Alli McEntyre. “These are challenging times and it’s really important to us that we deliver all of the content we had lined up for visitors so they can keep up-todate with the latest information, products and innovations in the arable sector. Farmers are rightly being celebrated for the key role they play, and we are committed to supporting the 3 Visit the Farmers Guide industry by bringing everyone together,” she comments. Facebook page to take part in our Lockdown Quiz Show You’ll find our Cereals Showcase starting on page 67. While farmers are out on the land all hours of the day – don't forget to let us know how you get on. right now, plenty of workers in other industries are currently furloughed, and they are being urged to help get the harvest 4 The Farmers Guide team in amid ongoing concerns about a labour shortfall. Farmers has been keeping in touch via regular Zoom meetings, and agricultural recruiters can now advertise their vacancies to ensure we continue to on the government’s Pick for Britain website – which brings the bring you the best content locations and details of jobs and recruiters into one place under possible – both in the the banner ‘Come help pick for Britain to feed the nation!’ magazine and online. The government has confirmed that those who have been 5 If you're struggling to find furloughed and are contractually allowed to work for another additional labour to assist with the fruit and vegetable employer can take on seasonal work and still be paid 80 per cent harvest, visit www. of their usual salary under the furlough scheme. pickforbritain.org.uk. In April, skilled workers were flown to the UK from Romania to pick fruit on various farms which hadn’t been able to recruit skilled workers in the UK, but more hands are still needed. If you need any harvest labour on your farm, check out the government website to see if it will help you. 2 This year's Cereals Event will be delivered in an entirely virtual way only, for the first time ever, in response to Covid-19 restrictions. Visit www.cerealsevent. co.uk to register your online attendance for free – the event will take place on 10th and 11th June.

69321

And finally... A farm manager had spent a week completing a pile of forms ready to send back to Defra. He emerged from his office and stood near the shredder, looking thoughtful. His secretary walked past, and took the wad of forms from him, saying: “Let me do that for you,” placing them in the shredder and flicking on the switch. To which he replied: “Thank you – I also need two copies please!”

SUPPLY INSTALLATION MAINTENANCE REPAIR

Covering East Anglia and the home counties

Reliable professional support 24/7 4

While government initiatives like this are welcome, one particular topic recently caused total dismay in the farming community. Despite the government’s commitment to protect British farming and food standards, MPs voted to reject an amendment to the Agriculture Bill, which would have prevented lower-standard food imports. Numerous farming and environmental bodies have expressed serious concerns that hormone-fed beef and chlorinewashed chicken could be allowed in Britain under new postBrexit trade deals. Set to be the biggest reform of British farming since 1945, with various farming groups campaigning tirelessly for a number of important amendments, the Bill was put before the House of Commons for its report stage and subsequent third reading on 13th May. It is likely that the Ag Bill will go to the Lords in the first week of June, then back to the Commons in early July. We’ll be bringing you more on this in the near future, and as always will be supporting British farming in any way we can. On a lighter note, it’s a busy time for farmers in the field, but for those with a bit of extra time on their hands once home, virtual quizzes seem to be the order of the day. Our marketing manager K.M Sharp along with designer Katherine Robinson have created the Farmers Guide Lockdown Quiz Show, which you’ll find on our official Facebook page – why not test your knowledge, versus your colleagues and family? Stay safe, stay alert (whatever that means!) and enjoy the magazine and the sunshine.

t: 01206 625675

01473 487616 m: 07803 875617

Specialists in agricultural doors Roller shutter doors Sectional overhead doors Folding shutter doors Sliding doors Steel doors e: sales@essexdoorsandshutters.co.uk

www.essexdoorsandshutters.co.uk

www.farmersguide.co.uk June 2020

4-5 out and about June.indd 4

19/05/2020 14:31


fendt.co.uk | Fendt is a worldwide brand of AGCO.

Fendt L & C Series Combines. The Fendt Straw Walker Combine range provides a wide choice of options to suit all your combine needs. ParaLevel (slope compensation) Yield and moisture monitoring Driver comfort and efďŹ ciency Ergonomic cab design The Combine choice for Mixed and Arable Farmers for excellent straw quality and outstanding grain sample. Contact your Fendt Dealer to ďŹ nd out more.

It's Fendt.

Because we understand agriculture. June 2020 www.farmersguide.co.uk

4-5 out and about June.indd 5

5

19/05/2020 10:01


INVEST IN THE BEST MLA

With 360 degrees visibility night and day, the Manitou JSM on a floating armrest, the M -Vario Plus transmission, the Easy Connect system and a robust design performed to last‌ you wouldn’t want to be without your Manitou

Manitou, the smart choice for your working day

For more information please visit www.manitou.com or call 01202 810400

11420 Invest In the Best Ad A4 MLA.indd 1 6-7 Comment.indd 6

01/04/2020 10:27 10:40 15/05/2020


0 10:40

Comment

British dairy: How can we weather the storm? There’s no denying that the dairy sector, and indeed many other sectors, are facing difficult times ahead. But farming is well known for its ability to withstand challenges, so what support is currently available? Sarah Kidby investigates.

Covid-19, unknown to us just a few short months ago, has now completely changed our way of life – and the closure of cafes and restaurants has hit livestock farmers hard, with some forced to dump thousands of litres of milk, while others suffer price cuts or delayed payments. To get the doom and gloom bit out of the way, at the time of writing, figures from the RABDF showed that 1.15million litres of milk had not been collected up to 11th May, while 17.3m litres had reduced value, and production was reduced by 2.85m litres. Staffordshire appears to have been most affected, with farmers in the region having discarded 3.55m litres of milk, followed by Dorset (2.85m), Kent (1.5m) and County Antrim (1.2m). Non-bovine milk producers have suffered serious consequences as consumers switch from luxuries to staples. It is estimated that the loss of the food service sector has resulted in 5,200 farmers being affected by milk price reductions of 0.5–4p/litre, or even higher for some, according to AHDB, which estimates that 75 per cent of British farmers have seen some kind of impact, with a quarter of these experiencing high or medium impact. While the figures present a picture of gloom,

support is increasingly becoming available and it is important to consider all the options for your business, and seek advice on how to proceed. In May, the government announced financial support of up to £10,000 for dairy farmers who lost more than 25 per cent of their income in April and May, covering 70 per cent of their lost income. The move was broadly welcomed by farming groups, but some warned that further support may well be needed. The government also relaxed competition laws and joined the dairy sector in launching a £1.2million campaign to promote the importance of sharing hot milky drinks with friends and family – even if it is just remotely. The situation has also seen a number of businesses, including several of the major supermarkets, publicly promote and support the hard work of British farmers.

Seeking expert advice RABDF is running a series of webinars for dairy farmers, starting with rural business advisor Simon Haley, who notes that money has never been at a lower rate to borrow and speaks about the range of funding available and how to apply – from the latest round of Countryside Stewardship Grants,

Countryside Productivity Scheme and funds such as the Henry Plumb Foundation. In a recent AHDB podcast for dairy farmers, SAB advisory director Neil Wilson offered tips for managing cash flow problems. Summing up, his three key messages were: focus on your costs and quickly cut as much non-essential expenditure as possible; look at your cash flow and work out a budget for the next 6–12 months to help you make informed choices; and talk to people – whether it be the AHDB, a consultant, your vet, feed company, or other farmers – to help you gather information and reach a decision. It may be worth considering areas of your business you can liquidate without affecting the day-to-day running of your main business, to generate cash and cut costs, he says. You could also take advantage of extra time to make payments if your creditor’s terms allow 21- or 30-day payment, for example – whilst considering the long-term impacts. For those with hire purchase agreements, Neil suggests finding out if you could take a payment holiday and perhaps even renegotiate to add time to the end of the payment scheme. When approaching banks for support, he says a proactive approach is always appreciated. Tell them your situation, what you have already done to try and mitigate it and ask them if there is anything that they need you to include on the business plan you submit. While it may be tempting to make knee-jerk decisions in the current climate, it is also important to think about how your business will be affected in the long term, Neil adds, so discuss options with your vet and/or farm business consultant.

Further information The AHDB website (www.ahdb.org.uk/coronavirus) offers a range of podcasts, webinars and advice for farmers struggling as a result of Covid-19. RABDF is also asking farmers to complete its dairy survey to help gather information on the evolving situation (www.rabdf.co.uk/survey). Meanwhile, if you need financial or mental health support during these difficult times, you can contact the Farming Community Network on 03000 111 999, RABI on 0808 281 9490, or RSABI in Scotland on 0300 111 4166. FG

June 2020 www.farmersguide.co.uk

6-7 Comment.indd 7

7

15/05/2020 15:41


WIN!

nimized n a i Y A raphe Autog pped Wra hest Toolc o.uk

www.sealey.co.uk

aley.c ww.seses 31st May 2020. w t a r lo Ente etition c Comp HURRY!

230Amp Professional MIG Welder with Binzel® Euro Torch

FREE

Mild Steel MIG Welding Wire • Model No. MIG/777706 • List Price £40.95

• Model No. SUPERMIG230 • List Price £879.95

£519.95 EXC. VAT £623.94 INC. VAT 20V Oscillating Multi-Tool Kit 2 Batteries

• Model No. CP20VMTKIT • List Price £189.95

VALID UNTIL 30TH JUNE 2020

£119.95 EXC. VAT £143.94 INC. VAT

Underbody Coating/ Wax Injector Kit with Disposable Heads • Model No. SG14D • List Price £32.95

Super Grip Knitted Gloves Latex Palm - Packs of 6 Pairs

• Model No. TSP121L/6 • List Price £8.95

£19.95 EXC. VAT £23.94 INC. VAT 61pc Hammer-Thru Screwdriver, Bit & Nut Driver Set

£6.45 EXC. VAT £7.74 INC. VAT 5pc Air Accessory Kit • Kit it Contains: Gravity Feed Spray Gun, Tyre Inflator with Gauge, Paraffin Spray Gun, Air Blow Gun, Coiled Air Hose. • Model odel No. SA33G • List ist Price £48.45

• Model No. S01153 • List Price £76.95

£42.95 EXC. VAT £51.54 INC. VAT

8-9 Openfield Comment.indd 8 37164_Farmers Guide One Page BDS20 June Issue Advert.indd 1

£29.95 EXC. VAT £35.94 INC. VAT *Please refer to www.sealey.co.uk/guarantee for more information on guarantees. TRX-STAR, TRX-TS and TRX-P tools are suitable for driving TORX® and TORX PLUS® fasteners respectively. TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties, LLC.

18/05/2020 16:24 30/04/2020 15:21:39


21:39

Grain & Fertiliser Advice

Suppliers are coping well under Covid-19 pressure but markets are uncertain After a much busier spring than was expected in the current circumstances, new season fertiliser campaigns are on the horizon while the wheat markets are looking a little more tricky. As the weeks tick down towards harvest 2020, markets are entering into the ‘uncertain’ phase, writes Openfield’s head of compliance, shipping and research, Cecilia Pryce (right). It happens annually, but the current environment and uncertainties seem to be pushing consumers and farmers apart, like two similar polled magnets. The reasons are varied, consumers are trying to second guess the demand for their products – more beer in cans, less in barrels, bagged domestic flour versus commercially bagged flour or bioethanol demand versus less driven miles. The deciphering of headlines becomes more painful by the day – but harvest will happen and fields will get drilled ready for harvest 2021, because that’s farming. The reliance that the public and government put on farmers and the agricultural industry to ‘carry on producing what they want, how they want it and when they want it’ is immense. With the latest airing of the UK Agriculture Bill along with the ongoing Brexit trade talks and US trade negotiations, I wonder how many people stop to consider the daily uncertainty that UK agriculture faces when making decisions. Wheat drilled this autumn for marketing in November 2021 already faces a £14/mt discount from

November 2020, but farmers have little choice but to plant a crop and trust that someone will want it at a price that covers the cost of production and allows them to make a living. Negotiators nationally and internationally need to remember that real people farm our countryside and that, although the industry may be flexible, both can still be broken if pushed too far.

Fertiliser matters Following what has been a much busier spring than expected, fertiliser purchasing is now beginning to slow as we would anticipate for the time of year, with little requirements left to cover for the current arable crops, says Openfield’s fertiliser manager, Lucy Hassall (right). Suppliers and hauliers have coped well under the added pressure

of Covid-19 restrictions and social distancing measures that are currently in place. We experienced some haulage companies needing to temporarily take their fleet off the road due to staff having to self-isolate, which added to spring delivery pressure with high volumes to move to farm. To date, we have not seen any restrictions on imported products coming into the UK following these measures. The after-cut market is keeping the market at a steady flow, with competitive offers on blends and compounds as some suppliers look to shift this season’s stocks. Focus has now very much turned to planning for the upcoming new season fertiliser campaigns. This follows a recent survey carried out across the regions most affected by the weather and planting, which indicated there is a carry-over of fertiliser stocks on farm of between 10 and 15 per cent. This is a lower number than we anticipated, and we expect the new season campaign will run well should the terms be favourable to the grower.

At present, we are expecting the UK N fertiliser campaign will commence in early June and, as every year, we are uncertain how the offer will look from a delivery month point of view. In the past, we have seen later delivery months being available on the first offer which could feature again. At the beginning of May, new season Urea offers began to emerge with a range of delivery options running from July through until November, with attractive pricing which led to some uptake. There has been a mixed response to early Urea purchasing and for those that were not ready to commit at that point were mostly due to the preference of a new season AN price being available for comparison. Current markets remain volatile, with many factors that could affect pricing. New season offers are usually available for a very short period of time – knowing your requirements in advance will help to ensure you can take advantage of any early purchasing where the price is often at the lowest level for the season. Keeping in touch with your on-farm representative is key to keeping up to date with market information, offers and campaigns helping you to manage risk. FG

Grain price indicator (Nov 2020)

£158-164/t £120-126/t £POA/t

Feed wheat Feed barley Oilseed rape

*Prices quoted are from Openfield, predicted at 18th May 2020

June 2020 www.farmersguide.co.uk

8-9 Openfield Comment.indd 9

9

20/05/2020 08:52


Sulky restarts production Sulky Burel has re-started production of its fertiliser spreaders and seed drills at its French factories, after a threeweek shutdown due to Covid-19 restrictions. The restart will ensure current and new orders can be fulfilled. Modifications have been made throughout the sites to factory workstations, personnel movements, catering areas and changing rooms, plus the provision of personal protective equipment and cleaning products to enable staff to go back to work safely. Sulky UK managing director, Rob Thurkettle (pictured above), says: “Most of the orders for new machines were delivered before the factory shutdown and we anticipate the lead-time for delivery of new machines to return to normal in the near future.” There has been no interruption to parts supply to UK farmers during the busy spring season, and the UK team continues to be able to fulfil parts requests.

Upgrades for Kramer telehandlers

The Kramer brand is upgrading a huge model range to level 5 engines, as well as adding new features for increased comfort and an optimal driving experience for operators. The models, including KT407, will be equipped with the Deutz TCD 3.6 level 5 engine with 100kW power. The exhaust after-treatment

but still manoeuvred with the front axle – convenient in tight spaces or when driving along the silo wall. The KL55.8T telescopic wheel loader is also driven by a 100kW Deutz TCD 3.6 level 5 engine, with the Deutz TCD 4.1 offering 115kW as an option. The telescopic wheel loader is equipped with the ‘Smart Handling’ overload system. It prevents the vehicle from tipping over in the longitudinal direction. All-wheel, crab and frontwheel steering are available as standard. It‘s equipped with a telescopic loader unit which gives the wheel loader the advantages of a telehandler.

Muntons leads the way in sustainability

Finance service launched for members Fram Farmers has developed a service which assists with access to finance, helping farming businesses overcome the inevitable capital demands and spikes in cash flow that occur throughout the year. Following approval from the Financial Conduct Authority (FCA), the initiative has now been launched to members. Fram Farmers‘ financial controller, Nick Hindle, says: “Securing access to finance is a major issue for many businesses and is likely to become even more critical for those in the farming sector, as Brexit impact begins to take effect and financial institutions may tighten their lending criteria, as well as the potential difficulties faced by farming businesses due to the Covid-19 pandemic.” The service has been developed in conjunction with Flexi-Funding – a Leeds-based and FCA-authorised credit broker – and Hitachi Capital Business Finance – one of the UK’s leading asset finance lenders. Nick Hindle adds: “As a large, well-known and trusted business-to-business lender with excellent understanding of the farming and food sector, Hitachi Capital Business Finance is an obvious choice to enhance the service we offer our members. “We are delighted to be able to offer this service and are confident this will be of great benefit.”

with DOC and SCR will be supplemented with a DPF as standard. For optimal visibility, the compact models from the KT306 to the KT407 are optionally available with a raised cabin. To increase safety and comfort, entry has been improved via a recess in the cabin floor. In addition, the models starting with the KT306, 3,000kg payload and up have a fourth steering mode – manual crab steering – where the wheel position of the rear tyres can be fixed,

Muntons – the malt and malted ingredient manufacturer based in Stowmarket, Suffolk – is proud to be the first maltster to commit to the Food Waste Reduction Roadmap coordinated in the UK by WRAP – a not-for-profit organisation and IGD research and training charity. Muntons‘ director of technical and sustainability, Dr Nigel Davies, says:

“Muntons is pleased to promote the Food Waste Reduction Roadmap as a proactive focus with measurable outcomes. We are proud to continue to take the lead in the malting supply chain in adopting a practical sustainability ethos described here as: Target, Measure, Act.” WRAP director, Peter Maddox, said: “The link between food waste and climate change is something we can no longer ignore. Globally, around a third of all food is wasted and the IPCC estimated that food waste contributed

nearly 10 per cent of all man-made greenhouse gas emissions, between 2010 and 2016. Having the support of companies like Muntons is crucial in helping to mitigate against this problem through their own actions, and by engaging with their customer base. We are delighted that Muntons is supporting the UK Food Waste Reduction Roadmap in this way and will work with its clients to influence change. We would encourage others to follow its lead.”

DOOR SERVICES LTD Industrial Door Specialists

• Installation • Repairs • Planned Maintenance Specialists in Building & Perimeter Security 72240

Tel/Fax: 01245 600235 Mobile: 07887 806603 e-mail: info@landjdoorservicesltd.co.uk

www.landjdoorservicesltd.co.uk

Agricultural doors Steel roller shutters – galvanised and powder coated Insulated roller shutters for cold stores Pass door and steel hinged door sets High speed rapid roll doors Insulated sectional doors

24hr call out

• • • • • •

10 www.farmersguide.co.uk June 2020

10-11 NiBs.indd 10

20/05/2020 09:02


News in brief

Strong first-quarter sales for manufacturer At a time of unprecedented uncertainty and challenges for businesses throughout the world, family-owned UK agricultural machinery manufacturer, Claydon, has reported strong sales for the first quarter of 2020. The Suffolk-based company, which employs 47 staff at its design, manufacturing, distribution and service centre in Wickhambrook near Newmarket, Claydon continues to experience high demand for its products from customers throughout the UK and overseas, with approximately 80 per cent of production being exported

to 35 different countries. With support from its network of dealers, the Claydon factory is currently operating at capacity to meet demand for the company’s range of tractor-mounted and trailed Hybrid seed drills, straw harrows, TerraStar light rotary cultivators and TerraBlade inter-row hoes. These are marketed and sold by the company’s commercial team, headed by commercial director Spencer Claydon. Jeff Claydon, the company’s founder and chief executive, states: “We have focused on designing and producing machinery which enables farmers to establish crops

more quickly, profitably and reliably for more than 18 years. Never has that been more important than now, because whilst governments can seemingly ‘print’ limitless supplies of money just by pressing a computer key they cannot create food in the same way. “Farming is a longterm, weather-driven business and crops must be planted up to 10 months ahead of when they will be harvested. A lot can go wrong in that time, making it essential that this vital work continues uninterrupted so that consumers continue to have access to safe, affordable food. Despite the considerable challenges which farmers have faced this season they are working hard to achieve that, and we and our dealers continue to support them.”

Three farmers win use of New Holland machines The three winners of the ’Up to Speed’ scheme run by New Holland and The Prince’s Countryside Fund have been announced. Donald MacSween, Rob David, and Abbi Mason have each won the use of a New Holland machine for a year – a Telehandler, a T6 tractor, and a Boomer 40 compact tractor.

The scheme provides cutting-edge machinery to young people, new entrants, or those who will make a difference in their local community but would otherwise not have access to this type of farm machinery. The Prince’s Countryside Fund, a charity set up in 2010 to improve the prospects for those living and working in farming and rural communities, entered into a partnership with New Holland, a major British tractor manufacturer with a large-scale production facility for T6 and T7 tractors in Basildon, in early 2020.

The first year of the ’Up to Speed’ scheme saw nearly 50 farmers apply from all across the UK. The Prince’s Countryside Fund executive director, Claire Saunders, says: “We are delighted to be working in partnership with New Holland, to provide these three inspiring farmers – Donald, Rob and Abbi – with such tremendous machines, which I have no doubt will help get their businesses ‘Up to Speed’.” The Fund and New Holland plan to run the Up to Speed scheme again in early 2021.

Nozzle system integrates pulse width modulation directly Horsch has announced it will be making its new PrecisionSpray pulse nozzle system available on all new Leeb PT self-propelled, Leeb LT and GS trailed sprayers from 2020. “Although pulse width modulation (PWM) has been available for some time from various manufacturers, PrecisionSpray is one of the first to integrate the technology completely into our own Horsch sprayer software without requiring third-party controllers, making it easier to use,” explains Horsch UK general manager, Stephen Burcham. PrecisionSpray uses the latest generation pulse width modulation nozzle controls to ensure spray volumes are consistent across the field, despite variations in sprayer speed or changes in boom speed when turning. As a sprayer turns, the speed of the boom across the ground is dramatically faster on the outside than the inside, and this effect increases as the boom widths get greater. PrecisionSpray’s curve compensation alters the spray volume proportionally across the boom length to ensure the same volume of spray per sq. m from the inside to the outside of the turn.

Progressive resumption of manufacturing operations

At the time of going to press, over two thirds of the CNH Industrial production sites around the world are operational – albeit at a reduced rate – and the vast majority are expected to reopen by the time this issue of Farmers Guide arrives on your doorstep. CNH Industrial says that the resumption of manufacturing operations is proceeding according to plan, and follows all Covid-19 health and safety protocols on a global basis. Central to this process is employee health and safety and agreements with trade unions, to ensure full engagement with the resumption of activities. Priority was given to agricultural and powertrain manufacturing, considered essential industries by governments, and in response to local market demands. From the beginning of the pandemic, the company has continuously maintained support and assistance to its sales networks and global spare parts and components supply. End customers, together with the dealer network, have been fully supported by CNH Industrial Aftermarket Solutions, and today, almost all of its 45 logistics hubs are operational – the majority of which are running at full capacity.

Equipment - Livestock - Feed - Fertiliser - Seed - Cash Flow Diversification Projects - Building - Debt Consolidation • Finance from £15k to £2m • Excellent rates • 6 Month to 5 year terms • Tax Efficient • Simple, quick phone application

• Decision within 24 hours • Bad credit history, large debts – No problem! • High street banks unsupportive • Tenant farmers welcome

We bring the personal touch back into farm finance. For the personal touch ring Dean Pollen on 07902 645650 or apply on line at www.abfltd.co.uk

72067

June 2020 www.farmersguide.co.uk 11

10-11 NiBs.indd 11

20/05/2020 09:03


Our day to day challenges on-farm are increasing and with so many varieties to choose from...

How can I choose the right one to maximise my farm’s potential? Find out the answer now! Point your phone camera at the QR code to be transported to our SPP webpage and video

SOWING4PEAK PERFORMANCE Every farm is unique and every farm business has differing goals, meaning that variety choice can be a very personal topic. But it’s a simple truth that up to 80% of your crops potential is in-built in the seed that you choose to drill. Of course, you can influence the final outcome by good crop management but fundamentally, your outcome in terms of workload scheduling, yield and end quality are locked in when you make that variety decision. In a world of change, where the old rules and patterns change so frequently, that uncertainty becomes the new normal, the principles of SPP were created by KWS to try and make sense of all the information and factors that can affect crop performance on your farm. SPP will help you consider the unique factors affecting variety performance on your farm to ensure you choose the right genetics to maximize your return on investment. Sowing for Peak Performance from KWS – helping to build the foundations of your future crop success

www.kws-uk.com

12-19 Arable.indd 12

18/05/2020 12:57


Arable communities of all three types of microbe between the cultivation and cover cropping treatments. These were clearly associated with changes in organic matter level, highlighting the importance of this soil parameter (Figure 1).

Cultivation effect

Understanding soil biology to build future farming resilience State-of-the-art DNA analysis is highlighting valuable differences in soil biology under different soil management regimes, offering the opportunity to secure real and lasting improvements in both crop and environmental health. As part of the Achieving Sustainable Agricultural Systems (ASSIST) programme, researchers from Agrii and UK Centre for Ecology & Hydrology (CEH) are working to achieve a far better understanding of soil biology to inform future agricultural and environmental policy and practice. “It’s quite clear many arable soils need particular attention to maintain their productive ability and biological health in the face of our changing and more extreme climate,” observed CEH’s Professor Richard Pywell (right). “Not least in the face of the Government’s growing desire for delivery of ‘public goods’ and increasing restrictions on agrochemical and fertiliser use. “Under the banner of soil health improvement, though, farmers are being encouraged to do all sorts of things – at considerable cost, in many cases – on little more than anecdotal evidence. If we really want to improve things in a sustained way, we simply have to get more science behind our efforts. “We know that soil biology in general and micro-biology in particular is a major determinant of soil health. But we need to understand exactly what constitutes a healthy soil; what healthy soils really contribute to crop performance as well as other key ecosystem services like carbon storage, water infiltration and greenhouse gas emission reductions; and, most importantly, what we can do to most reliably improve their abilities to deliver in all these respects.”

Rob Griffiths, Tim Goodall and Melanie Armbruster, from the CEH molecular ecology team, have made a determined start to address these and other crucial questions over the past two years, using Agrii’s Stow Longa technology centre as their key testbed; taking advantage of the site’s field-scale trials exploring a wide range of different cultivation and cover cropping regimes side-byside under typical heavy arable land conditions. Extracting DNA from soil samples taken across the trials has enabled them to characterise the microbial communities under each in considerable detail. This, in turn, has highlighted marked differences in soil bacterial, fungal and other microbe communities between the various management regimes.

In the DNA DNA barcoding has further allowed the team to track specific bacteria, fungi and eukaryotes, identifying marked differences in the balance of potentially beneficial and harmful microbes under different cultivation and cover cropping practices. “Altogether, our micro-biologists identified an impressive 62,000 different bacteria, 2,000 different fungi and 4,000 different eukaryotes in the Stow Longa microbiome,” reported Professor Pywell. “Irrespective of the marker genes they used, they recorded large differences in the

Figure 1: Distinctive bacterial and fungal communities are associated with higher levels of organic matter, less disturbance and cover cropping at Stow Longa.

“The degree of cultivation also appeared to be a factor, with the communities under a straw raking regime being similar to those under the various cover crops and distinctly different from those under either shallow or deep tillage. “Our studies showed noticeable improvements in organic matter with both reduced cultivations and cover cropping,” he added. “Interestingly, over the three years of the Stow trials so far, less cultivation gave a greater improvement than the cover crops.” “Even more interestingly perhaps, we saw increases in organic matter and decreases in soil disturbance leading to higher populations of our potentially beneficial micro-organism indicators together with lower populations of those considered to be harmful (Figure 2).” Professor Pywell stresses it is very early days yet, given the number of species involved and the complexity of their interactions to understand. However, he has no doubt that the definite shifts in microbial populations after three years of soil management trials at Stow Longa highlighted in these studies are moving the understanding of soil biology and health under arable systems forward in a very positive way.

Practical management He and Agrii project co-ordinator, Andrew Richards (below left), accept that, by their nature, arable soils are unlikely to ever match the level of microbial diversity and stability of those under old meadows. However, they are convinced much can be done to encourage more stable communities with a better balance of beneficial to harmful microbes by employing practices which both reduce physical disruption and increase organic matter content of the soil. “This work is giving us solid scientific evidence of the way we can alter the vital microbiology of our soils with practical management changes,” Mr Richards pointed out. “We don’t yet know whether the microbial indicators being used initially are the right ones, or what levels are significant. Nor do we know what, if any, implications the changes in soil communities we’ve seen may have for plant health or other environmental factors. “However, our studies confirm that regularly disrupting microbial populations with cultivation or failing to provide them with sufficient organic matter to feed on will lead to less desirable soil communities. These are also likely to be less stable, more prone to domination by coloniser species and potentially more vulnerable to environmental change. “Having said that, well-targeted subsoiling may have a positive effect on soil biology by aerating otherwise anaerobic soils while having a negative effect in other environments. continued over…

June 2020 www.farmersguide.co.uk 13

12-19 Arable.indd 13

18/05/2020 12:57


Arable

Black Oat & Radisn

White Mustard

OR

Phacelia

No cover crop / conventional plough

Cover crop + min tillage

Effect on crop

Soil Organic Matter

?

Potential Pathogens

Possible beneficial microorganisms

Widest possible range To do just this, Agrii and CEH have extended their study to include around 400 fields across the south of the country from this season to explore the extent to which the patterns identified at Stow Longa are replicated under the widest possible range of cultivation regimes, soil types, rotations and climatic conditions. By marrying detailed information from field records, Rhiza soil analyses, hyper-local weather statistics and crop yields with organic matter analysis and microbial DNA characterisation,

Straw rake + natural fallow

Karat (shallow)

That’s why we need to build a much better understanding of the key components of the microbiome and how they respond to soil management practices.”

Karat (deep)

Reduced tillage – no cover crop

…from previous page

Bradyrhizobium

N fixing

Verrucomicrobia

N fixing

Metarhizium

Takeall decline

Phytomyxea

Club root

Plasmodiophora

Cabbage club root

Pythium A, B & C

Root rot – beneficial subspecies?

Pythium D

Figure 2: Changes in microbial populations under different regimes at Stow Longa. Key: Arrows indicate direction of change with number of arrows indicating magnitude of differences.

they aim to develop an industry-leading database of soil biology interactions to support science-based improvement efforts. “With the widest dataset, we can begin to build a reliable model to help growers and industry advisers plan their soil management for the most costeffective results,” suggested Professor Pywell. “At the same time, we can drill down deeper into the microbiology of the most promising sites to identify what

really sets them apart from the rest and why. “We are at the start of what we believe will be a step-change in our understanding of the mechanisms underpinning soil health; the sort of change that will be essential if we are to reliably improve the functioning of our most important farming and environmental resource, let alone achieve the ‘cleaner, carbon-neutral farming’ that has to be our ultimate aim.” FG

EXTENDED GRIMME WARRANTY – FOR ADDED PEACE OF MIND NEW for 2020, TWO YEARS WARRANTY is standard on all new GRIMME machines – leaving you free to focus on your business without worrying about the cost of an unexpected breakdown. GRIMME PROTECT enables you to extend your original GRIMME warranty on a new machine for up to a total of 5 years* and it is available on used GRIMME machines too.

GRIMME UK Ltd.

www.grimme.co.uk

Find out more about GRIMME PROTECT talk to your local GRIMME Partner today.

*Terms apply

14 www.farmersguide.co.uk June 2020

12-19 Arable.indd 14

18/05/2020 13:00


Accurate weather data can improve farm and crop management Until recently, access to real-time and historical site-specific climatic data was regarded a luxury by many farms, but that situation is changing. David Williams reports. Access to accurate, site-specific weather information can assist farm decision making and management, particularly for activities such as fertiliser and pesticide applications, harvesting and drilling, and crop irrigation. Accurate historical weather records improve ability to compare farm performance year to year, allowing fact-based decisions to be made regarding cultivations, crop types and varieties. Weather station and network provider Sencrop entered the UK market last year having already built a network of more than 15,000 users across mainland Europe. A major attraction of Sencrop’s system is its simplicity. Users purchase one or more of the company’s range of connected weather stations, and select one of three subscription levels to suit their situation. Professional-grade stations accurately measuring rainfall, humidity and temperature are available from just £349.99 and are easily installed at any location. A long-life integral battery provides the power and, as soon as the station is turned on, a built-in geolocation sensor logs its position, and the unit connects to Sencrop’s cloud-based data store. Unreliable mobile phone networks aren’t an issue, as Sencrop uses Sigfox for successful data transmission from almost anywhere in the UK. Weather information can be accessed from anywhere with a data connection through the dedicated app. This simplifies crop monitoring, especially for farms with land remote from the main base as users can see real-time weather conditions from stations at any location. Depending on the subscriptions level, as well as accessing data from their own stations, users can view information from any two additional Sencrop weather stations across Europe. A map showing available stations can be viewed through the app, and the station of interest is added to the ‘dashboard’. ‘Basic’ subscription allows up to two weather stations to be viewed with up to three users having access to the data, and costs £79 per year making it a cost-

effective option for smaller farms where a single station can be shared between neighbours. ‘Advanced’ costs £229 per year and allows up to 10 stations to be viewed and up to five data users. Additional stations and users can be added for £40 each.

 Sencrop offers a range of professional weather stations for farmers, all connected through a Europe-wide network.

Long-term test Farmers Guide is working with a large Suffolk arable farm this year, trialling Sencrop’s system. The farm operates across several locations and having quick access to real-time weather data is proving an advantage, reducing time spent travelling between sites to check conditions. FG

COMING SOON! Everything you liked about our Gusto pellets in a ferric phosphate formulation. ®

• High quality, persistent, palatable bait • Excellent spreading and ballistic characteristics • Made with Desidro technology

For more information visit:

www.adama.com/uk Always read the label and product information before use. For further product information, including warning phrases and symbols, refer to www.adama.com/uk or call The Technical Helpline on 01635 876 622. ADAMA Agricultural Solutions UK Ltd. Third Floor East, 1410 Arlington Business Park, Theale, Reading RG7 4SA. Telephone 01635 860 555. UKenquiries@adama.com.

0421_ADAMA_Farmers Guide_ADAFe3 Ad_142x189.indd 1

12-19 Arable.indd 15

29/04/2020 08:29

June 2020 www.farmersguide.co.uk 15

18/05/2020 13:01


Arable  Crops emerging after 10th October are far less at risk of BYDV than those emerging earlier in the season, says Yorkshire adviser Andrew Fisher.

Dress for success This coming autumn will be the second without the use of Deter, and Dominic Kilburn looks at the implications for crops in terms of key soil- and seed-borne pests and diseases, and the importance of maintaining the use of seed treatments in wheat and barley. Following the extraordinary autumn and winter weather experienced by many growers at the start of this season, and the devastating effect it had on winter cereal plantings in some areas, it’s clear that one of the greatest challenges come this autumn will be in persuading growers to delay drilling as part of their usual cultural control strategies. Many will already have over-year seed on farm ready and waiting and, understandably, they will be keen to get drilling to avoid any kind of repetition of last autumn’s difficulties. While delayed drilling plays a key part in reducing black-grass populations, it can also be a useful strategy in tackling BYDV (barley yellow dwarf virus). By delaying drilling the crop emerges into cooler conditions when the pressure and spread of the virus from aphids is generally lower than at higher temperatures. Autumn 2020 is the second season that growers will face without the use of banned neonicotinoid seed treatment Deter (clothianidin), but Yorkshire Arable Advice agronomist Andrew Fisher (top right) says that, by default, almost all drilling was delayed last autumn which seems to have avoided problems with BYDV. “That said, we only got about 20 per cent of the winter cereal acreage in anyway, and we have seen more gout fly than BYDV this season,” he says. “I am mindful of the fact that holding back growers from drilling early is going to be difficult this autumn, but it’s important to point out that we have noticed that crops emerging after 10th October are far less at risk of BYDV than those emerging earlier in the season.” Where aphid pressure was high last autumn, his growers were geared up with some of the “better quality” pyrethroids which he says still have a reasonable effect in reducing aphid populations in the crop. “One application per crop is advisable so as not to select for resistant strains,” he adds.

Mr Fisher points to other cultural controls for BYDV in the growers’ armoury including removal of the green bridge between harvest and drilling, as well as selecting tolerant varieties. “If the need is to drill earlier, then BYDVtolerant winter barley varieties such as KWS Amistar and Limagrain’s Rafaela are options, while a Candidate wheat variety is coming through the system. “Now that the trait is discovered, I expect more BYDV-tolerant material to come through the breeders’ pipelines,” says Mr Fisher.

Wheat bulb fly larvae in

the stem of wheat.

Mr Adamson points out that, following the loss of Deter and recently banned Austral Plus (tefluthrin + fludioxonil), an insecticide seed treatment for wheat bulb fly and wireworm, this autumn growers will be reliant on Signal 300 ES (cypermethrin) – the only option available for both wireworm and wheat bulb fly control in autumn sown wheat and barley. According to UPL, Signal can deliver a boost to autumn establishment plant count by as much as 40 per cent where wireworm pressure is high, similar to control levels provided by Austral Plus, but much higher than the 20 per cent seen from Deter. “Wireworm damage can happen in the spring when wheat crop vigour can suffer from grazing and a loss of tillers, but it’s the autumn that is the real concern where whole plants are lost,” says Mr Adamson.

Wireworm concern Another concern following the loss of Deter, aside from the threat of BYDV, is the potential for an increase in wireworm pressure in arable rotations. Although not usually purchased with this pest in mind, Deter did provide a reduction in damage against wireworm even if the label didn’t offer complete control of the pest. Wireworm is often associated as a problem for growers in the west, where there is an abundance of grassland, but with the loss of Deter it’s something arable growers more widely need to be aware of, suggests UPL technical lead for seed treatments and herbicides, Rob Adamson (left). “There is an increasing amount of grass grown in rotations in the east now and, as many growers have regularly used Deter for BYDV, which was certainly doing something in terms of wireworm control, wireworm will not have been an issue as the Deter buffered against damage from the pest, disguising the issue,” he says. “As well as grass leys, we should also consider wireworms appearing in grassy cover crops, of which there is known to be an increase in area following the well documented establishment difficulties of last autumn/winter,” he adds.

 The ‘dead heart’ symptom seen in the field in spring.

Wheat bulb fly UPL’s business development manager David Ramdhian (below) points out that wheat bulb fly will take advantage of fallow land this year. “It occurs in hotspots, making assessing the pressure very challenging,” he comments. “Though it can appear anywhere, the pest is particularly notable in a belt stretching from midSuffolk, through east Lincolnshire and up into Yorkshire. “The pest is most likely to be predominant after peas or potatoes, as these are harvested early, leaving bare soil for the fly to lay its eggs. Fallow fields this year are therefore of particular concern, as they provide the perfect environment to lay eggs.” continued over…

16 www.farmersguide.co.uk June 2020

12-19 Arable.indd 16

20/05/2020 08:55


Arable

12-19 Arable.indd 17

18/05/2020 16:54


Arable  Adult wheat bulb fly.

No cut backs

…from previous page

If the target is wheat bulb fly, Mr Ramdhian recommends using the AHDB thresholds when considering the need for Signal. “The requirement for a bulb fly seed treatment is lower when drilling earlier as crops have more time to tiller and are more able to withstand attack. To get the most out of Signal during the main hatching period, which begins in mid-February, it’s best to use it on crops drilled in late October onwards. “If the target is wireworm however, the value of Signal in the autumn is not drilling date dependent, and where this pest is a concern Signal should be considered irrespective of when the crop is established,” he adds.

Seed treatment additions Changes to UPL’s seed treatment line up included the addition last autumn of frit fly control to Signal’s label. Although little talked about, frit fly can cause serious damage to wheat at establishment, and pressure can be particularly high where wheat follows oats – a crop that has significantly increased its area this season. Also, the company’s broad-spectrum fungicide seed treatment Rancona i-MIX (ipconazole + imazalil), for protection against seed-borne diseases in wheat and barley, has regained its spring-use registration from 2021 which will be especially important for key spring barley growing areas such as Scotland, says UPL. As well as the reinstatement of spring use to the Rancona i-MIX label, UPL has also included ergot suppression to the label. A fungus which is also hosted by black-grass, and can lead to grain rejection, Rancona i-MIX will suppress the germination of ergot particles in seed, reducing the spread of fungal spores in the following season.

Certis key account manager Tim Eaton (pictured below left), urges growers not to cut back on fungicide seed treatments on winter cereal crops this autumn, if pressure from seed- and soil-borne diseases is to be avoided. “Farmers will be looking at input costs later this year and will want to save money, understandably, but they shouldn’t compromise on single purpose dressings like Fountain (fludioxonil + tebuconazole) or Difend Extra (fludioxonil + difenoconazole), which control seed-borne diseases such as bunt. The reason that many growers have not seen bunt is because the seed treatments they have always used, which are relatively cheap products, have kept it at bay. “Don’t let it back in,” he stresses. As well as Fountain and Difend Extra, which are dual action SPDs for winter cereals, providing enhanced protection against bunt and fusarium, Certis also offers take-all seed treatment Latitude (silthiofam) in its crop protection portfolio. “Latitude is pigeonholed as a seed treatment to protect second and third wheats against takeall, but the disease can also affect first wheats following fallow or a spring cereal such as barley – both of which have found their way into many rotations this season.

Latitude is pigeonholed as a seed treatment to protect second and third wheats against take-all.

Barley is always sown early in the autumn and people should think about it as a second cereal. “It’s also relevant to winter barley, especially the hybrid varieties, where Latitude has been proven to protect yield and gross margins,” says Mr Eaton. “The yield potential of modern barley varieties is so much greater than in the past that the investment in Latitude to protect against take-all is now very worthwhile.

As well as second and thir d wheats, take-all can affect first wheats followin g fallow or a spring cereal such as barley.

“Barley is always sown early in the autumn and people should think about it as a second cereal,” he adds. “Many growers will consider drilling cereals earlier this autumn and Latitude will be useful in enabling growers to do this, as it is the only chemical solution in what should be an integrated approach to tackling the yield robbing disease take-all,” he concludes. FG

Variable picture for seed stocks on farm Agrii national arable seed products manager, Barry Barker (pictured below), says that it is a very variable picture in terms of the tonnage of undrilled winter wheat seed that remains on farm, suggesting that in some of last autumn and winter’s worst hit areas – such as the East Midlands and Yorkshire – on average, about 20 per cent of original seed stocks remain undrilled. “It’s interesting to note that spring barley seed sales were up by about 75 per cent in those areas, which tells a story itself in terms of the failure to get winter crops successfully established,” he says. In addition, Mr Barker points out that NIAB seed certification statistics show that the number of winter wheat seed multiplication contracts in the ground is 10–15 per cent less than usual, and so supplies of popular new varieties such as KWS Extase, in particular, could be compromised this autumn.

Yield this season will also affect supply, he suggests. “When processing seed stocks for farm, Agrii typically works on the basis of achieving an average of 7.5t/ha of cleaned winter wheat seed, but this year it’s going to be nearer 6.5t/ha. “Seed supply is not just dependent on whether a sufficient area of crops was drilled but also the effect on yield of some of the very late drilling last autumn and the poor conditions over winter.” Mr Barker says that seed treatments applied to seed for drilling last autumn, but which remained in the shed, should be suitable for protecting the seed when drilled this autumn but it is imperative that growers get a germination test booked anyway. “Contact your seed supplier and get the test booked in as soon as possible as his service will be in high demand in the run-up to the autumn,” he advises. FG

18 www.farmersguide.co.uk June 2020

12-19 Arable.indd 18

20/05/2020 08:55


FULLY LOADED

HYBRIDS RLM7 Phoma Resistance TuYV Resistance Pod Shatter Resistance

ARTEMIS

Good spring and autumn vigour @LGSeedsUK lgseeds.co.uk/artemis

Tel: 01472 371471 lgseeds.co.uk enquiries@limagrain.co.uk

12-19 Arable.indd 19

18/05/2020 17:00


Arable

New seed treatment option for barley A new fungicide seed treatment option for barley that not only controls a number of key seed-borne diseases but which has also been shown to boost crop establishment, root growth and yield is being launched for use starting this autumn.

Improved establishment of hybrid winter barley from Vibrance Duo + ipconazole (right) versus standard seed treatment (left) in a wet autumn.

wet soils – because roots become lazy as they don’t have to grow far to reach moisture. “In plot trials looking at establishment of hybrid barley in last year’s wet autumn, Vibrance Duo boosted plant stand to 246 plants per sq. m compared with 216 plants per sq. m from a standard seed treatment. It also boosted early ground cover from 8.5 per cent to 11 per cent. Glasshouse tests have also shown better barley establishment with Vibrance Duo in normal and drought conditions. “We have also seen clear improvements in spring barley establishment, and spring barley yield across 24 sites over three seasons was boosted by an average of 0.11t/ha compared with a standard seed treatment.”

Disease control Vibrance Duo, from Syngenta, has been available for use on winter wheat seed since 2017. In winter wheat it has become well-recognised for not only fulfilling the traditional role of a fungicide seed treatment – controlling key diseases that threaten crop emergence – but also for other important advantages, says Syngenta seedcare marketing manager, Gillian Colman (pictured right). Among these are improved rooting, more vigorous establishment – especially in more challenging growing conditions – and improved yield. “From this autumn onwards, the benefits of Vibrance Duo will also now be available for growers of winter and spring barley,” confirms Mrs Colman. “Better root structures provide a key foundation for yield and are associated

with improved access to water and nutrients and improved crop resilience. “Importantly, as well as seeing benefits in trials from Vibrance Duo in conventional barley, we have also seen benefits in hybrid barley, which is already known to be a vigorous crop.”

Clear improvements Syngenta field technical manager, Dr Jonathan Ronksley (right), who has been evaluating Vibrance Duo in barley, says independent results have shown a 32 per cent improvement in the growth of primary roots in treated winter barley seed compared with untreated seed, as well as clear improvements in the number and length of lateral roots. “Improved rooting becomes all the more important in difficult growing conditions,” comments Dr Ronksley. “Surprisingly, these include

Dr Ronksley says clearly the core reason for using a fungicide seed treatment is disease control. In barley, he says some of the key yield-reducing diseases that need to be targeted include leaf stripe; seedling blights such as microdochium nivale, which cause poor establishment especially in poor seedbeds and with late drilling; and covered smut. “Vibrance Duo has label approval against all these diseases. However, whenever it is used on barley seed we are recommending that it is always co-applied with the seed treatment ipconazole, not least for added control of the disease loose smut, which is an increasing problem. “Many of our trials have focused on this Vibrance Duo + ipconazole combination. It is highly cost-effective, has given excellent control of loose

smut and, importantly, still maintains the other benefits of Vibrance Duo, including rooting and yield,” Dr Ronksley explains. The active ingredients in Vibrance Duo include the specialist SDHI, sedaxane, and fludioxonil, which is also contained in the well-known fungicide seed treatment, Beret Gold. Crops that Vibrance Duo can now be used in include winter wheat, winter triticale, winter rye, spring oats and winter and spring barley.

Winter wheat Recent seasons have produced highly contrasting weather patterns to challenge winter wheat crops, says Mrs Colman. “The 2017/18 season saw a cold and wet February and March, with the Beast from the East, followed by very hot, dry weather and drought-stressed plants. By contrast, the 2018/19 season saw a kind autumn, followed by very little drought stress during spring and summer, and then heavy rain in June. “Despite these very different weather scenarios, field comparisons over substantial numbers of sites showed Vibrance Duo still delivered an average of around a 16 per cent improvement in plant establishment and a 30 per cent increase in rooting in each of these two seasons over standard seed treatments used. More importantly, it also averaged 0.3t/ha extra yield in the 2017/18 season and 0.1t/ha extra yield the year after. “Establishment is a critical phase in the crop’s life cycle, and at the time of planting you don’t know what the weather over the rest of the season will bring. Based on these results, it is clear that Vibrance Duo can boost winter wheat establishment and yield in easier seasons and harder ones, in terms of weather,” Mrs Colman adds. FG

- Positively Metered • 24m Application • Positive Displacement Metering • GPS Speed Control • 250l Hopper • Twin Disc System • Full Rate Control

echneat 20 www.farmersguide.co.uk June 2020

20-21 Arable.indd 20

18/05/2020 17:02


DON’T LET

ESTABLISHMENT BECOME A DRAIN ON YOUR BUSINESS

Stop pouring money down the drain...

Take a look at our establishment system Proving to be the most reliable establishment method, the Mzuri system produces perfect seed to soil contact. With better establishment, direct into residue, soil structure and organic matter is improved to support vigorous root growth – all resulting in a significant and consistent uplift in yield.

With Mzuri you could benefit from: ESTABLISHMENT

SYSTEM SAVINGS* on average

£107/ha

SEEDBED FERTILISER SAVINGS*

£36/ha with band placement

LABOUR SAVINGS* on average

81 mins/ha

* Based on our 2019 customer survey of users converting from conventional plough based systems.

Call us today for a no obligation chat about the future of farming.

tel: 01905

841123

UK MADE

web: www.mzuri.eu

Mzuri Limited, Peopleton, Worcestershire, WR10 2BF

20-21 Arable.indd 21

FUTURE PROOF FARMING

18/05/2020 17:04


Arable

Improving biodiversity on the farm

This priority habitat has plants sown deliberately to provide food and cover for pollinators, birds and other farmland wildlife to thrive. The Major Cyclone mower doubles up as a grass topper and crop shredder, saving farming businesses time and resources. Peter and Sian Wombwell of Wombwell Farms use a 4.2m Cyclone (pictured) to stay on top of stubble clearance, grass maintenance and margin control on some 3,000 acres bordering south Cambridgeshire and north Essex.

any material is cut cleanly and evenly spread. Cut-and-collect machinery is beneficial on field margins that require removal of substantial clippings. This is particularly useful in wildflower meadows. Scotscraig Golf Club in Scotland has been using the 1.8m Major Green Bee to keep gorse, broom and brush from creeping onto its fairways. “There’s around 7–8ha of heavily infested rough which we use the Major Green Bee to bring back into a manageable and more usable

We run under the HLS scheme and are very conscious of being environmentally responsible.

With growing emphasis on environmental stewardship, farmers and landowners discuss how they are using Major Equipment machines to encourage farm wildlife to thrive. As society increasingly looks to tackle climate change and reverse the threats to wildlife, there is growing pressure and incentive for farmers, as custodians of the environment, to encourage wildlife to flourish on the farm. With 72 per cent of Britain comprised of farmland, taking steps

to improve local ecosystems presents an opportunity for farmers to connect with their local communities and display clearly to the public what farmers are doing to help the planet. Field margins are increasingly seen as conservation areas for biodiversity improvement in arable farming.

“We run under the HLS scheme and are very conscious of being environmentally responsible,” commented Peter Wombwell. “We’ve used the Cyclone on maize stubble, cover crop, grassland, and one particularly difficult application down the tramlines in oilseed rape – it just whizzed over that!” The folding wing topper has six rotors spaced just over 2ft apart, doubling the number of heads found in batwing mowers to ensure

PREMIUM Thinking of a flail? SLURRY HANDLING THINk AGAIN! SOLUTIONS and the low Major emission Cyclone application bridges theunits gap between 9 Capacities from topper and 1150 to 4000 gallons in a variety of mulcher

status,” comments Scotscraig course manager, Chris Barnard. This mid-sized flail collector mows, chops, collects and rolls in one pass. Chris adds: “By not using sprays and chemicals, we have seen a significant increase in wild flowers, insects and wild birds around the course.” Major Equipment is happy to discuss the ways you could improve biodiversity on your farm or property – visit www.major-equipment.com for contact information. FG

VVis isit ituosuaRt LaM wM ebas2it0e20 ! sftoaRnsdpe 17C.6 s6&0 VHia dLeLo1s7!

configurations 9 Range of 7.5m 9 eight models in working retro-fit low emission dribble bar widths from 2m to 6.3m and trailing ‘double shoe 9 patented chop’ spreading units. rotary blade system

Call 01524 850501 or visit www.major-equipment.com 22 www.farmersguide.co.uk June 2020

22-25 Arable.indd 22

18/05/2020 17:05


Fuel for thought Ben Knight, farm manager at Springfield Farms, discusses how adopting a one-pass system could help to protect farms from any future rises in red diesel fuel duty. For the agricultural industry, March began with concerns over the upcoming Chancellor’s Budget, with speculation surrounding the future of the lower fuel duty on red diesel. In the end, effective lobbying by our industry saw the idea binned, but it acted as a reminder of how exposed growers can be to yet another factor outside of our control. But just how exposed? The Chancellor’s Budget also made me appreciate how using the one-pass Mzuri system has helped our farm reduce its exposure to oil price volatility by significantly lowering our fuel consumption for establishment. Prior to adopting the Mzuri system, we would undergo several passes to achieve a seedbed, even before the drill entered the field. Heavy cultivations including ploughing and power harrowing were not only time consuming but were burning significant amounts of diesel in addition to the associated wearing parts and tractor maintenance. Even on a relatively small farm like Springfield sitting at 450 acres, the diesel soon adds up. If you stopped to pause about what effect still being on a draining system like that and having the risk of losing the lower fuel duty would have to us, it would be simply unimaginable. As a ring-fenced farm, the majority of our fuel use is in the field working, but for growers who

have to travel to get to pockets of land, the effects would be felt even further. I understand that the requirement to travel isn’t something that can be changed for these growers, but the number of trips to the field can be – with the help of a one-pass system.

Take Control of your Nitrogen Use Efficiency with YaraBela AXAN TM

• Added sulphur for optimum yields Now, using the Mzuri ProTil, we consolidate seedbed cultivations, fertilising, seeding and reconsolidating into a single, targeted manner, awarding benefits to both soil health and establishment – and, importantly, minimising our fuel consumption. Of course, we’ve also achieved significant savings in labour, wearing metal and repairs, something that was so significant even in the first year, our farm accountant pointed out what he believed to be a mistake in the farm office bookkeeping. Fortunately, there was no mistake and in fact, it turned out to be the best change the farm has ever made. FG

• Accurate and even spreading up to 54m • Ammonia emissions are half that of urea plus inhibitor* * DEFRA, NT2605

Yara AtFarm now available on Yara Rewards Exchange your rewards points today

@Yara_UK Yara UK

www

www.yara.co.uk

agronomy.uk@yara.com June 2020 www.farmersguide.co.uk 23

22-25 Arable.indd 23

18/05/2020 17:06


Arable  An NAAC mobile seed processor in action.

do, but if doing so it will be vital to avoid problems with blackgrass and BYDV. We no longer have seed treatments to control BYDV, so growers will have to spray to control the aphid vectors of BYDV if aphid thresholds are exceeded in the field. Mobile seed processors can still treat seed to give a useful level of control of wheat bulb fly and wireworm.

Could farm saved seed work for you? NAAC mobile seed processors have reported their busiest spring workload since 2013, helping to avoid a big shortfall in UK spring seed supply. They have also saved farmers a huge amount of money – typically £50–100/t of seed compared to buying in certified seed, the company claims. Modern mobile seed processors have sophisticated cleaning and treatment machinery, so farm saved seed quality compares favourably with other seed options. “Even if a grower doesn’t use farm saved seed in his or her business, what it offers UK farmers is choice – and when it comes to keeping things competitive and service levels high, the customer always needs choice,” comments NAAC seed section chairman, Rob White (pictured above). Looking ahead to the autumn season, mobile seed processors expect to be busy again as farmers look to keep their costs under tight control.

Top tips for farm-saving seed in autumn 2020:

Supplies of certified seed of some varieties may be limited following the wet autumn in 2019, keeping prices high. Many farmers have some seed still in the barn from last autumn, and it’s recommended that farmers get their over-yeared seed tested for germination and possibly vigour – NAAC mobile seed contractors offer a germination testing service. Treated seed requires a full germination test, so it’s best to get samples sent off 4–6 weeks in advance of drilling. Over-yeared treated seed is normally okay to sow, but can lose some germination and vigour – so it's best to allow for this when setting seed rates and try to plant this seed in the earlier drilling slot if you can, according to NAAC. Following the wet autumn in 2019, many farmers may be tempted to start autumn 2020 drilling a bit earlier. This may be the right thing to

• Remember to ask for seed testing well in advance of drilling. Select bold seed from your best fields if possible. • Remember to store 20–25 per cent more as grown seed than you need, to allow for screening losses. • Get your mobile processor to use a gravity selector/separator to boost seed germination and vigour. • Use a standard seed treatment plus additional seed treatment where wheat bulb fly, wireworm or take-all is a concern. A seed treatment containing Sedaxane may help establishment, especially when sowing late into cold wet seedbeds. • Consider using a nutritional seed treatment such as manganese +/- a phosphite/amino acid based product to help improve rooting and plant vigour and help plants to resist disease during establishment. FG

Mobile Seed Processors Qualified • Professional Experienced NAAC mobile seed processors offer a personal and professional service to farmers throughout the UK. Quality Seed Sourced from your farm Processed to your standard Ready when you are

National Association of Agricultural Contractors

Farm Saved Seed Putting You First

ASSURED LAND-BASED

CONTRACTOR

Find your nearest mobile processor at naac.co.uk

ASSURED LAND-BASED

CONTRACTOR

01780 784631

ASSURED LAND-BASED

naac.co.uk

NATIONAL ASSOCIATION OF AGRICULTURAL CONTRACTORS

CONTRACTOR

ALBC

NATIONAL ASSOCIATION OF AGRICULTURAL CONTRACTORS

24 www.farmersguide.co.uk June 2020

22-25 Arable.indd 24

20/05/2020 09:03


EXCLUSIVELY AVAILABLE FROM

ANYTHING BUT

CONVENTIONAL Good spring and autumn vigour Strong resistance to Ligh Leaf Spot Short and stiff Exceptional oil content Resilient and adaptable variety

AARDVARK

Consistent performer across all regions @LGSeedsUK lgseeds.co.uk/aardvark

Tel: 01472 371471 lgseeds.co.uk enquiries@limagrain.co.uk

22-25 Arable.indd 25

June 2020 www.farmersguide.co.uk 25

18/05/2020 17:06


Arable

Securing the greatest returns at the least risk Managing the harvest is the next key OSR challenge coming under Bayer commercial technical manager, Ella Crawford’s spotlight in the third instalment of our special series. The ability that hybrid oilseed rapes, in particular, have to compensate has amazed us once again; especially so in such a challenging season. The much more extended flowering stage hasn’t made sclerotinia management any easier, though. And it will make the best management of crops in the run-up to and at harvest more important than ever, if we are to get the greatest returns we can from them. As well as struggling to shake off the effects of the wet winter and sizeable burdens of flea beetle larvae, many crops were hampered by poor nitrogen availability in the bone-dry April. On the plus side, providing we get sufficient early summer rain, this will mean more N for filling what

has been an encouragingly good pod set. However, generally thin crops with far more late-branching also means these pods will be wellspread throughout the canopy and widely spread in their maturity. Later nitrogen uptake, thicker stems and flowering sprays like Aviator (bixafen + prothioconazole), with their valuable staygreen benefits will, of course, all add to the challenges we face in both desiccation and combining. If we are to achieve the most profitable combination of yield and oil content with the least red seed, patience is the one thing we’re going to need, above all; not least because, rather than bringing combining forward, spraying before the seed moisture drops below

30 per cent just means crops take longer to dry down. Alongside seed number, all the ADAS Oilseeds YEN work confirms that the length of time between flowering and desiccation is the factor most closely related to crop performance. This isn’t surprising since we know each day of seed filling lost typically reduces the average yield by 1–2 per cent. So, by holding off on desiccation for a week, we could add an extra 0.5t/ha to our crops. And, with most oil accumulated towards the end of seed fill, a markedly higher oil content, too. Not going in too early with the pre-harvest Roundup will be crucial this season, with many crops carrying more of their yield lower down the canopy, in pods that can be 7–10 days later in their maturity than those near the top. Holding off on desiccation until the lower pods are ready, of course, carries the risk of increased seed shedding from the earlier-ripening upper pods; something we must also avoid if we are to capture as much of the yield as we can and minimise future volunteer burdens. The highest risk here comes with conventionally-bred varieties, as they do not carry the genetic pod shatter resistance introduced in the Ogura hybridisation system. A very careful balance between risk and reward in getting the most from variable crops will be equally vital with the many hybrids not bred for the best shatter resistance. In contrast, the trait pioneered by Dekalb and standard across all its modern hybrids allows us to reap the full rewards of patience. Indeed, independent trials have shown an average yield advantage of 6 per cent over non-resistant varieties with a one-week delay in harvest, rising to nearly 10 per cent with a two-week delay.

SHORT OF STORAGE SPACE? 02476 459000

Bury St Edmunds-based Bayer commercial technical manager, Ella Crawford is responsible for supporting growers, agronomists and distributors across Suffolk with the most up-to-date crop protection information and advice.

Competitive prices for all your agricultural & industrial requirements

72310

CONTACT US NOW!

BOWIE LOCKWOOD sales@bowielockwood.co.uk

We can only do this, however, if we time and manage our pre-harvest spraying as well as possible. Because there’s no reliable way of judging the optimum timing even from pod colour, we have to get into the crop and check a representative sample of pods for that tell-tale change in seed colour from green to brown. And, difficult though it may be, this has to be beyond the tramlines. For the most reliable activity with heavily-waxed, senescing canopies – not to mention weather uncertainty – there’s nothing to beat a modern Roundup formulation for proven activity in hot, dry weather, rain-fastness and drift minimisation. All the more so with the markedly poorer performance we’ve seen from many alternative glyphosate formulations replacing the withdrawn Ethoxylated Tallow Amines (ETAs). The right rates and first-class spraying practice are important, too. While valuable in hard water areas, we must appreciate that no amount of adjuvant can make up for insufficient glyphosate. Equally, we have to gear water volumes, pressures and boom and nozzle settings for thorough canopy coverage and penetration; keeping our spraying speed down; and, spray early in the day for the most consistent uptake. And after this we need to have enough patience to wait until the stems as well as pods are fully fit before combining, recognising that this may be up to three weeks after spraying under some conditions. FG

RIDBA

Rural & Industrial Design & Building Association

*prices subject to site survey & location All prices subject to VAT

26 www.farmersguide.co.uk June 2020

26-33 Arable.indd 26

20/05/2020 09:04

HP11


HP1101415_DK_OSR20_UK_PRINT AD_PRODUCT - EXSTAR A4V v04.indd 1 26-33 Arable.indd 27

07.05.2020 18/05/2020 16:43 14:48


O S R Impressive brassica weed control. • Excellent volunteer and broad-leaved weed control • Rapid establishment • Wide range of high-performing hybrids

Clearfield® - The only complete OSR system. Ask your agronomist today or visit agricentre.basf.co.uk/Clearfield

Clearfield is a registered Trade Mark of BASF. Always use plant protection products safely. Always read the label and product information before use. For further information including warning phrases and symbols refer to www.agricentre.basf.co.uk

26-33 Arable.indd 28

18/05/2020 16:41


Arable

Early applied oilseed rape desiccant protects yield With pressure on UK oilseed rape growers to cut costs, the emphasis has to be about protecting yields and margins. From the very moment of drilling, the crop is nurtured and protected against a host of potential damaging and yield-robbing scenarios, right up until the combine enters the field. Coupled with weather and lateseason disease, harvest losses can be significant and mean the difference between profit and loss – especially if yields are marginal. That’s the message being advocated by Sussex-based ProCam agronomist, Mike Thornton (pictured far right). Advising on oilseed rape crops on mainly light soils across the south coast, he believes that to lose yield in the final stages of the crop’s life, through poor desiccation, harvesting or bad weather, is something that can be mitigated

and has been successful in preventing seed shedding by using a pod sealant.

Desiccation timing Uneven crops that ripen at different stages can add to the problems, and the dilemma that many agronomists face is when to time the desiccation process. “Whether the crop has suffered through flea beetle damage at establishment, or winter pigeon grazing, the unevenness at desiccation can have a big influence on how the crop performs overall,” explains Mr Thornton. “Quite often, for whatever reason, 50 per cent of the crop might be ready to desiccate, with 25 per cent too far gone and another 25 per cent not ready at all.

LOCK IN YOUR PROFIT To find out more, talk to your advisor or call De Sangosse on

01223 811215 or visit

desangosse.co.uk

That’s the dilemma we often face and, historically, it’s a case of going with the majority of the field.” Mesh – a latex-based co-polymer from De Sangosse – can be applied up to eight weeks prior to any glyphosate application. It works by tacking and protecting the pod seam, reducing its natural tendency to split while allowing the pod to expand, contract and mature normally. This affords 12 weeks protection after application, safeguarding the crop through to harvest. Mesh should be applied once pods have reached full size (growth stage 80–82) when they are green and still pliable but no later than growth stage 89, when pods are ripe. At the later desiccant growth stages, crop yields within the tramline can be reduced as much as 30 per cent through wheeling damage.

Reduced yield loss Mr Thornton has been impressed by the way the product has reduced yield loss across a whole range of oilseed rape crops and conditions – although getting growers to go through the crop twice at that stage can be a challenge. “This is where our job as agronomists is critical,” he explains.

“To get the maximum benefit from Mesh, early enough application is crucial. Yes, there is an increased application cost, but if the pods are sealed and protected in advance of desiccation, then tramline losses can be significantly reduced even at 36m. Once growers have seen the benefits of doing this, then they don’t need asking a second time. The proof of the pudding is definitely in the stubble after harvest. Up to 300– 500kg/ha of seed can be saved using a well-timed sealant, depending on the variety.” Mr Thornton says Mesh is best applied at a rate of 1-litre/ha in 100–250 litres of water as a medium quality spray. And, if mixing with a partner, the partner’s water volume recommendation should take priority. It can also be co-applied with a variety of desiccants. If coapplying, always follow the desiccant label, he says. It should be added to the spray tank as the last component in the mixture. FG

Secure your crop yields with an application of De Sangosse Pod Sealants, a simple and cost-effective solution that will significantly reduce yield loss and increase profit. DE SANGOSSE POD SEALANTS BRING A SIGNIFICANT PAYBACK Average yield saved in De Sangosse trials – 10% Typical UK Yield 4t/ha

Lower Yielding scenario 2t/ha

OSR prices 300t/ha – Worth 0.4t/ha (£120ha)

OSR prices 300t/ha – Worth 0.2t/ha (£60ha)

12-1 Payback

6-1 Payback

2020 CAN STILL BE REWARDING June 2020 www.farmersguide.co.uk 29

26-33 Arable.indd 29

20/05/2020 09:05


Arable by the AICC in West Wittering, Sussex, showed that there was at least a 0.4–0.5t/ha yield advantage from varieties with TuYV resistance against those without. “Aspire particularly stood out in this trial, yielding 6.7t/ha – that’s a massive bonus over the 6.1t/ha from Django or 6t/ha from Campus,” explains AICC’s Peter Cowlrick. “In a second trial in West Sussex, the trend was the same, with TuYVresistant varieties leading the pack.” While growers often associate hybrid types for their high yield potential, Aspire balances performance with some of the easier management aspects that conventional varieties glean, adds Will. He continues: “Hybrids are normally the focus for breeders and growers, but we wanted to provide this level of performance for growers who prefer to grow conventional OSR.”

For the right variety, look at the whole package The key to success with oilseed rape is choosing a variety that will work in your particular situation, according to one seed specialist. Nickerson Seeds’ seed specialist, Jonathan Payne (right), works closely with breeders and growers, helping ensure farmers have access to the traits that will work best for them. “With the continued loss of conventional crop protection chemicals, genetic traits are playing an increasingly important role,” he says. “When choosing a variety it is crucial to consider the individual merits of each particular variety to suit a particular situation to maximise the crop’s genetics to achieve the best results.” For example, he points out that turnip yellows virus (TuYV) is becoming increasingly challenging to control, as the main vector – the peach potato aphid – has developed resistance to pyrethroids, and the disease becomes more widespread across the British Isles. Since 2016, Limagrain UK – along with industry partners Agrii, Openfield and the AICC – have been monitoring levels of TuYV in crops across the UK. Sampling is carried out twice during the growing season, with an initial small-scale survey conducted in Oct/Nov, followed by extensive testing carried out in early spring. “TuYV incidence reached its highest level ever last season, with 84 per cent of non-TuYV resistant UK crops infected in early spring 2019. Almost all sites had an infection rate between 81–100 per cent,” explains Limagrain’s European oilseed rape portfolio manager, Dr Vasilis Gegas (left). “Whilst incidence was highest in East Anglia and south east England, sites in Scotland and the south west now also show very high levels of infection,” he points out. “Infection usually occurs in September/October when aphids are still flying – the earlier a crop is infected, the less seeds per pod develop, so the harsher the yield penalty,” he adds. “This means that early drilled crops that are more open, corresponding with mild autumnal conditions, are at the highest risk. Once an aphid picks up the virus, it’s infected for life –

if an uninfected aphid feeds on an infected plant, the aphid becomes infected and so the cycle continues.” Limagrain was the first to introduce a commercially available TuYV resistant variety back in 2014 – Amalie. However, the variety was lower yielding than others and was recommended as a special category. Over the past few years, there’s been a huge genetic improvement in breeding for TuYV resistance, meaning that Limagrain’s resistant varieties have moved from the bottom of the yield pile to the top by quite a margin – and today, TuYV resistant varieties sit amongst the highest yielding varieties on the 2020/21 AHDB Recommended List. “Yielding 106 per cent over control, Aspire is one of these varieties, and the only conventional variety on the RL that carries the TuYV resistant gene,” says William Charlton, Limagrain’s UK arable marketing manager. Aspire has been very successful in both official and on-farm trials and, when it was recommended, it was the highest yielding OSR variety on the RL, he adds. “Year-on-year it’s proved to be a very robust variety across the board which has attracted growers and Aspire often sells itself through its performance in on-farm trials.” Last year’s harvest results from trials conducted Gross Output

Symptoms of TuYV in OSR

.

And it’s not just a top performer in terms of TuYV. Aspire also scores a 7 for light leaf spot, and 6 for stem canker. “It’s probably the cleanest conventional variety I’ve ever seen,” adds Jonathan Payne. “Aspire is short and stiff-stemmed and therefore easier to manage which we know is one of the key reasons growers opt for conventional varieties.” Also positioning it as better suited to early drilling, Jonathan reckons a lot of growers will be looking to target that initial sowing window this coming season. “I think this year growers will be looking back over the past few years and will see the early drilling slot is often the go-to, to avoid catchy weather patterns, and Aspire‘s TuYV trait will be crucial when aphid pressure is higher.” FG

Aspire

Ballad

UK

106

105

Elgar 100

East / West

106

105

101

North

105

102

98

Agronomics Resistance to lodging

8

8

8

Stem stiffness

9

8

8

Shortness of stem

7

7

6

Earliness of flowering

7

7

6

5

4

6

Height (cm)

Earliness of maturity

147

150

154

Oil content (%)

45.7

45.8

45.1

Table: On the 1–9 scales, high figures indicate that a variety shows the character to a high degree (e.g. high resistance). Data from the AHDB Recommended List 2020/21.

30 www.farmersguide.co.uk June 2020

26-33 Arable.indd 30

20/05/2020 09:06


Arable

Enriching British Farming

26-33 Arable.indd 31

21/05/2020 08:56


Arable Good ground covering

Agronomic research highlights flea beetle battling strategies Extensive research across the country over the past 11 years shows that, like black-grass, a jigsaw of cultural controls can really help beat the beetle. In the same way as black-grass, though, these controls need to be applied alongside one another with careful planning that is firmly based on the degree of field risk, starts with the rotation, and has sufficient flexibility to cater for different conditions – especially soil moisture, says Agrii, who conducted the research. “It’s vital to appreciate that insufficient moisture or excessive pressure from the pest at establishment means we are likely to be fighting a losing battle, whatever we do,” stresses trials manager, Steve Corbett (above). “So, we need to have a wide enough rotation to restrict the

build-up of local pressure and, dare I suggest it, avoid the sort of block cropping that really concentrates flea beetle populations. And, of course, we shouldn’t even consider sowing rape unless and until we have sufficient moisture in the ground. “Just like black-grass with wheat, the rotational flexibility not to sow OSR when the risk is too high is fundamental. As is having the right crop ahead of it. Mainly because, time and again, all our work in high CSFB pressure areas of the country highlights the overwhelming importance of presenting a barrier to the beetle which minimises the ‘green on brown’ attractiveness of the young rape crop.”

Average shot holes per plant

6 5 4 3 2 1 0 Low stubble

High stubble

Figure 1: Adult flea beetle damage in AgriiFocus Trials 2019. Source: Agrii

Agrii’s field-scale trials at Chiseldon in Wiltshire last season, indeed showed average shot-holing damage in a crop grown on bare ground was twice that on ground with a good covering of winter barley debris. At Langley in Essex in 2018, there was a more than threefold difference in leaf damage between a young crop in bare soil and one with decent straw and chaff coverage. And, averaged across varieties and other treatments in 2019, the difference in damage between a crop sown into high (12in) and low (3in) stubbles was almost as substantial at the AgriiFocus technology centre (Figure 1). “Across a 70-acre field at Eyeworth in Bedfordshire last season, we saw massive differences in damage where areas of the preceding wheat crop had been sprayed-off for black-grass,” adds Agrii head of agronomy, Colin Lloyd (above). “In marked contrast to the evenly established crop with almost no shot-holing in the bulk of the field, the sprayed-off areas without any straw cover were devastated, with hardly any surviving plants.”

Companion crops Where a preceding fallow, spring barley or straw crop baled for sale means little, if any, decent cover, Steve Corbett suggests a nurse or companion crop could offer a valuable alternative CSFB barrier. However, his experience underlines the need to plan and manage these options very carefully as well as the extent to which the weather can defeat the best laid plans. As nurse crops, buckwheat and, to a lesser extent, fenugreek, sown in late July into reasonable moisture conditions last year noticeably reduced flea beetle damage in OSR sown three weeks later in his trials at Saxby Cliffe in Lincolnshire. However, at Throws Farm, buckwheat nurse crops sown in early July into much drier soils resulted in poor establishment and relatively high levels of damage to OSR sowings two weeks later – up to 37 per cent on bare soils and 20 per cent with decent stubbles. As a companion crop, buckwheat drilled at the same rate with the

OSR did a much better job, keeping average CSFB damage down to 3.5 per cent against the 24 per cent average of the nurse crop plots. “In other trials, we’ve seen a buckwheat companion crop do as well in reducing shot-holing as some promising new seed treatments we’ve been investigating,” points out Steve. “In this case, as a nurse crop lack of moisture meant it couldn’t get away and provided far too little cover. In contrast, the companion plots were sown into more moisture. “Having said that, we’ve also found nurse crops can grow far too well, shielding the rape planted into them but, at the same time, compromising their establishment. And we’ve seen companion crops be a waste of time and effort when they haven’t had enough moisture. “Like the crop itself, sufficient moisture is the critical factor. Equally important with companion cropping in particular, our work has shown is using the right variety of buckwheat at the right rate and sowing it at the right depth. “The two varieties we’ve been studying are like chalk and cheese. Common buckwheat is far thinner, more spindly and runs to flower too rapidly to give a decently sustained cover, while the alternative establishes a much better canopy and gives more extended protection to the young rape. At the same time, the size and shape of the common buckwheat seeds means they separate out more from the OSR in single hopper drills, leading to less even crop cover. “It’s a jigsaw of agronomic support we have to put together here – including minimal soil disturbance at drilling, fastdeveloping varieties, good seedbed nutrition and timely early insecticide spraying as well as long stubbles, good soil cover and/or effective nurse or companion cropping,” he insists. “It’s a complicated business, getting all the pieces in the right place.”

Putting the pieces together Agrii regional technical adviser, David Felce (above) who farms at St Neots, agrees that putting it all together is by no means easy. However, he has no doubt of the value it offers.

32 www.farmersguide.co.uk June 2020

26-33 Arable.indd 32

20/05/2020 08:56


P value = <0.001, LSD = 2.45(%), cv = 29.8%

30.0

CSFB Damage (%)

25.0 20.0 15.0 10.0 5.0 0.0

Trt1

Trt2

Trt3

“A good seedbed with sufficient moisture is crucial,” he insists. “Otherwise it really isn’t worth bothering with OSR these days. Spreading slurry or digestate can really help get the crop away. But these need to be incorporated and we know it’s important to minimise soil disturbance for the least ‘green on brown’ flea beetle attractiveness. So, there’s a clear dilemma here. “Whether it’s a hybrid or pure line, a fast-developing variety is important too. This is crystal clear in our trials and in the field. However, we’ve found no value in increasing seed rates as a defence. This only leads to thinner-stemmed crops less able both to tolerate larvae and to branch away from them in the spring. “Our work shows the value of protected phosphate together with a balance of nitrate and ammonia N and immediately available boron in the seedbed as a specialist starter fertiliser. It also underlines the contribution lambda-cyhalothrin can make when used at the best time – crop emergence.” Putting these elements together, Colin points to results from the latest Throws Farm trials with one of the fastest developing OSR varieties available (DK Expedient) sown at two seed rates with 12 different establishment programmes and three sets of drilling conditions. Averaged across the cultivation methods and seed rates, the recorded damage levels clearly demonstrate the value of stacking the controls in exactly the same way as black-grass management. As the package is built from a relatively poor nurse treatment crop at one end of the scale to a decent companion crop plus specialist starter fertiliser and early pyrethroid spray programme at the other, so flea beetle damage declined from an

Trt4

Trt5

Trt6

Trt7

Trt8

Trt9

Trt10

Trt12

average of almost 25 per cent to virtually zero (Figure 2). “This says it all,” he concludes. “Unless you are faced with too little moisture or your recent crop experience suggests the pest pressure is likely to be too high – in which case you shouldn’t be sowing OSR – you can beat the beetle. And you can do so very economically, too. But only if you are willing and able to give it enough care and attention with the right pieces of the cultural control jigsaw for your own conditions.” FG

Electrifying performance DSV VOLTAGE is the Number 1 National Candidate for both Gross Output AND Seed Yield. • Highest Gross Output – 108.1 (East and West Region), plus high Oil Content – 45.5% • Strong vigour and excellent standing power • TuYV protection and the highest Light Leaf Spot score – 7.3 Source: AHDB Candidate List 2020/21

Phone 01949 851335 www.dsv-uk.co.uk

26924 SA DSV Voltage Farmers Guide Mini Page Advert.indd 1

26-33 Arable.indd 33

Trt11

 Figure 2: Throws Farm CSFB Establishment Trial 2019 Damage by Programme (averaged across cultivation method and seed rate). Source: Agrii

12/05/2020 12:41

June 2020 www.farmersguide.co.uk 33

18/05/2020 16:38


Arable

BTS 1915 sugar beet, new to the BBRO RL for 2021.

New sugar beet varieties demonstrate important breeder improvements Despite the heavy rain at the end of 2019, seven new varieties joined the BBRO sugar beet Recommended List for 2021. Rachel Hicks writes. In a difficult trial season, growers will be happy to see significant additions to the sugar beet list. These are BTS1915 from Limagrain UK Ltd; Evalotta KWS, Catriona KWS, Eldorana KWS, Sancha KWS and Smart Rivetta KWS, all from KWS UK Ltd; and Lacewing from SESVanderHave UK Ltd. BTS 1915 was the highest yielding of all varieties on the list, at 108.1 above the control with a reasonable sugar content of 17.7 per cent. Bred by Betaseed and marketed by Limagrain UK, BTS 1915 leads the RL by a considerable amount – 5 per cent over any other variety. According to Limagrain sugar beet product manager, Ron Granger (right): “We normally expect to see year on year yield advances of 1–2 per cent in yields – so BTS 1915 is something quite special – and this is at a time when many other arable crop yields have plateaued.” Nor is it all about the yields, he continues. “BTS 1915 has excellent agronomic characteristics that make it a very useful variety onfarm. We recognise that varieties also

need to establish well, have good bolting tolerance and robust disease resistances to succeed. “However, when BTS 1915 is sown in the normal sowing window from mid-March onwards, it has shown an excellent bolting tolerance, recording no bolters. This result has been consistent over the last three years, including data from 2019, which we know was a high year for bolting. “But, it should also be recognised that when BTS 1915 is sown early, the variety might show excessive bolting as the Early Sown Bolter trials, conducted as part of the Recommended List trial series, demonstrate. “The variety has the highest brown rust disease resistance rating on the Recommended List of 8.7, thus making it the first choice for late lifting where brown rust is potentially the key disease to control,” he concludes. Lacewing is a new BCN variety. “With BCN increasing within the UK beet crop, as well as the rising threat from soil pests generally

since the loss of neonicotinoid seed treatments, this is a timely addition to the RL,” says SESVanderHave UK’s Ian Munnery (left). With an adjusted yield of 100.4 per cent, Lacewing provides growers with yields comparable to the top non-BCN varieties, but with the added benefit of BCN tolerance. It’s also one of only three BCN recommended varieties on the list, thus offering growers alternative choice when it comes to genetics. Whilst the three-year early sown bolting data have resulted in Lacewing being recommended for sowing after mid-March, Mr Munnery says it is worth noting that, in 2019, Lacewing’s early sown bolting score was only 3,732/ha compared to 6,096/ha for Daphna and 7,035/ha for Cantona. He therefore stresses the importance of looking at data for individual years. Lightning – another SESVanderHave UK variety launched last year – is now classed as suitable for early sowing on the new RL.

“Early sowing is an important trait,” says Mr Munnery. “It enables the crop to reach 12 true leaves at the earliest opportunity and so mitigate the threat from Virus Yellows.” Three other SESVanderHave UK varieties – Vixen, Puffin and Conger – progress to PR2 on the newly published list. Smart Rivetta KWS is the second ALS herbicide tolerant variety to join the list, whilst Evalotta KWS, Catriona KWS, Eldorana KWS and Sancha KWS produced no bolters in three years of normal sown RL trials. Chairman of the RL Board, Mike May (above right), comments: “No season is easy, but harvesting in the very wet autumn of 2019 was particularly difficult and all credit must go to the harvesting team and trial operators for getting sufficient trials harvested and analysed to allow this RL to be completed. It was good to see that the control varieties achieved a mean yield of 118 adjusted tonnes per hectare (it was 112 last year), with new varieties offering up to a greater than 8 per cent yield increase above the controls. “In addition, it is also good to see that the herbicides are now in place, so that growers will be able to grow ALS herbicide-tolerant varieties. Whilst these herbicidetolerant varieties yielded less than the controls, the RL trials are treated with conventional herbicides and it is expected that the ALS tolerant ones will produce higher yields when used with the SmartConviso herbicides. The breeder will have more information on how best to use these varieties in practice,” Mr May continues. The 2021 list shows how successful breeders have been, with 10 out of the 22 varieties on the list recording no bolters in the 20 RL yield trials, which were sown from mid-March onwards, and make up the database used for the 2021 RL. “Before ordering any of the special varieties bred for BCN, AYPR or ALS herbicide tolerance, growers should discuss options with the BBRO and breeders who will have more information on their performance and use in the presence of the specific problem,” advises Mr May. FG

34 www.farmersguide.co.uk June 2020

34-37 Arable.indd 34

20/05/2020 15:55

346-0


GENETIC DIVERSITY FOR A SUCCESSFUL HARVEST.

BTS 1915

NEW

SIGNIFICANTLY DIFFERENT Highest yielding variety available High consistency of performance Very good disease tolerance

BTS 1140 PROVEN ON FARM

BTS 3325 THE EARLY STARTER

BTS 4100 THE SWEETEST THING

BETASEED. SIMPLY DIFFERENT.

Limagrain UK Ltd

www.betaseed.uk

Distributed by

Rothwell, Market Rasen, Lincolnshire, LN7 6DT Tel : 01472 371471 Fax : 01472 371386 Enquiries@limagrain.co.uk www.lgseeds.co.uk/sugarbeet

346-001720_Anzeige_A4_UK_RZ.indd 1 34-37 Arable.indd 35

26.03.20 17:16 18/05/2020 14:44


Arable Sugar beet at Dyson Beeswax.

explains Ben. “We trialled a third of our crop using just digestate last year, so no manufactured fertiliser was used – instead opting for a mixture of homeproduced solid and liquid digestate, applied pre-drilling in the seedbed. “The digestate is high in potassium, which is needed by the sugar beet, so it’s a perfect solution. Yield results from this crop were very good, averaging 96t/ha.” “There’s no doubt the condition of the soil has a big influence on late season campaigning, he adds. “In the right conditions, crops can put on a lot of yield in late season – if you have the resilience in the soil to manage later lifting, then you can take advantage of this and I think we certainly saw the benefits of this, this year with the later lifting of some crops. “Looking ahead we shall have to see what happens with pricing of course – we are trying some new varieties, BTS 4100, Kortessa and Advena, as well as sticking with BTS 1140 and BTS 3325. “We also have the challenges of loss of chemistry to contend with; it’s going to be difficult to find an effective replacement with the loss of desmedipham for weed control,” concludes Ben. FG

Sugar beet genetics come to the fore Yield along with key agronomic characteristics are essential in a sugar beet variety, and we spoke to one agronomist to find out more. Responsible for the agronomy of 13,000ha of arable cropping across three sites in Lincolnshire, Oxfordshire and Gloucestershire, Beeswax Dyson Farming Ltd agronomist Ben Abell (pictured) points out that, on the Lincolnshire farms, sugar beet remains a key break crop – adding much needed diversity to the rotation. “High yields, sugar content and good all-round agronomics such as bolting resistance and robust disease resistance, are important for a variety to be successful on farm; it’s the combination of characteristics that really matters,” he acknowledges. “Last year, we grew BTS 1140 and BTS 3325 – both of which meet these criteria and, considering the difficulties with getting the crop out of the ground, we were very pleased with the yields. Our average adjusted yield was 87–96t/ha across the sites, giving us an overall average of 93t/ha. “We aim to get the beet drilled by the end of March; drilling starts as soon as conditions and soil temperatures are favourable from the beginning of March. It’s really important to plant varieties according to their most appropriate drilling date, so we always grow several varieties at one time. “Varieties more suited to the early slot such as BTS 3325 are drilled first, and we then move onto varieties such as BTS 1140, which are better suited for the normal drilling slot from midMarch onwards.”

Important factors Limagrain’s sugar beet product manager, Ron Granger, agrees with Ben’s approach – pointing out that, whilst yield and sugar content are the top criteria for choosing a new

sugar beet variety, factors such as establishment and bolting tolerance are also very important – particularly when deciding which variety is best suited for a certain situation. Ron notes that sugar beet breeding is in the fortunate position where breeders are still able to push yields without compromising the sugar content – and this is at a time when many other arable crop yields have plateaued. “This is why growers are able to access varieties such as BTS 1140 that are high yielding but also offer a high sugar content,” says Ron. “Based on this, BTS 1140 continues to be one of the leading tried and tested varieties on the 2020/21 BBRO RL, and there is no reason to think that this will change, due to its proven performance on farm.”

Getting beet up and away Cultivations for sugar beet at Dyson Beeswax are focused around ploughing in early autumn, leaving the soils to weather over the winter, followed in the spring by one pass with the cultivator in front of the drill. “The sugar beet is drilled at 1.2 units/ha which, working on 80 per cent establishment, gives us about 100,000 plants, depending on the field or site.” Ben’s aim is to get the sugar beet established and up to the 12-leaf stage as soon as possible, as this gives it the best chance against flea beetle and virus yellows damage. “So early nutrition is important,” he says. “This spring, as the soils were wetter and colder, at establishment we applied phosphate in the form of DAP into the seedbed – promoting crucial early root and shoot development.

“We also keep a keen eye on trace elements, topping up whatever is deficient. “So far we have not seen too many aphids but will continue to monitor this – we want to avoid spraying if we can. At least we have the fall back of Biscaya or Tepeki if we need. “We have found organic manures applied in the late summer to autumn are important to help make the soils more resilient, which definitely paid off in last year’s very wet conditions,”

UK’sming Li . o N 1roduct on p recti or for cof soil ity acid

For ultimate performance Optimises soil pH Increases available calcium Fast acting and long lasting Provides valuable nutrients Improves soil structure Flexible service options

Helpdesk 0800 090 2376 limex@britishsugar.com limex.co.uk

LimeX is a business of British Sugar plc

36 www.farmersguide.co.uk June 2020

34-37 Arable.indd 36

20/05/2020 15:56

J0065


Arable

Use two sprays for

better, bigger beet yields. At this busy time of year, having a clear and simple beet disease control plan can help protect your crop, maximise your yields and improve your return on investment. When used in a two spray programme, Escolta is proved to increase your yield by 13%*1 (on average) giving you an extra £191/ha.*2

To discover how Escolta can support your disease control programme, visit cropscience.bayer.co.uk/escolta

*1

BBRO Sugar beet reference book, 2019. *2 Based on an untreated yield of 70 t/ha at the 2020 minimum crowned beet price of £20.99/t.

Escolta contains cyproconazole and trifloxystrobin. Betanal maxxPro contains desmedipham, phenmedipham, ethofumesate and lenacil. Escolta, Betanal and maxxPro are registered Trade Marks of Bayer. Use plant protection products safely. Always read the label and product information before use. Pay attention to the risk indications and follow the safety precautions on the label. For further information, including contact details, visit www.cropscience.bayer.co.uk or call 0808 1969522. © Bayer CropScience Limited 2020.

34-37 Arable.indd 37 J006549_Escolta_2020_Farmers_Guide_210x297_AW.indd 1

18/05/2020 07/04/2020 14:49 10:38


Arable

Increased yield potential One company explains how its Xbeet seed treatments have raised the bar in terms of evolving the science in crop emergence, early crop development and plant health. Germains Seed Technology has been applying breakthrough bioscience to support the British sugar beet industry from the ground up for more than 50 years. The company is well-placed geographically, based in King’s Lynn, Norfolk, which is at the heart of the British sugar beet industry and surrounded by a rich history of the crop and innovation. Over the years, Germains has developed unique processes to help manage yield fluctuations

caused by pests and diseases – helping growers to achieve consistent returns from their sugar beet crops. According to Germains, Xbeet enrich 100, with its natural formula, improves plant vitality with the introduction of a natural elicitor that stimulates the plants’ own natural defence mechanisms. Now, Xbeet enrich 100 has progressed into the new

and improved Xbeet enrich 200, incorporating a coating of bio-stimulants derived from natural plant extracts. This treatment, combined with the Xbeet priming and elicitor treatment, not only delivers increased yield potential, but also assists the crop to reach the critical 12-leaf stage and mature plant resistance. Independent trials for the new Xbeet enrich 200 have been carried out in collaboration with the BBRO, and independent trial specialists and have shown an average yield benefit of 1.4 per cent from Xbeet enrich 200 over Xbeet enrich 100 during three years of trials. The independent verification of the trial results by NIAB have shown the results are significant to the 95 per cent confidence level. Further commercial scale strip trials in 2018 and 2019 have shown an average of 2.5 per cent increase in yield across three trial sites in the UK. Commercial scale strip trials replicate commercial practice and give an indication of the results growers can expect from farm scale use of a product. “We are excited to be bringing our Xbeet enrich 200 treatment to market,” says Germains’ EU commercial manager, Richard Nicholls (left). “It addresses many of the establishment concerns of UK sugar beet growers. Our trial results have shown a significant yield increase and we look forward to growers seeing the benefits and, ultimately, the additional income.” FG

38 www.farmersguide.co.uk June 2020

38-41 Arable.indd 38

20/05/2020 09:08


Five ways Chilean sugar beet growing differs from the UK Field yields of over 150t/ha suggest Chile’s growers know more than a little about growing the crop. Bayer’s Beet150 competition winners visited to find out more. Soils with organic matter that would be the envy of the majority in the UK, phenomenal levels of solar radiation and seemingly unlimited amounts of water make Chile among the best places to grow sugar beet. And that is more than backed up by the fact the world record for sugar beet of 196.7t/ha was grown by Barbara Becker from the Santa Fe region, around 330 miles south of the capital city, Santiago. But UK sugar beet growers Mark Means (pictured below right), along with fellow winner James Fretwell (pictured below left) undertook a study tour of Chile, after winning Bayer’s Beet150

grown under central pivot systems. The water is cheap, its use is not heavily regulated and the climate during the growing sugar beet yield competition, during which they season is dry, so Mr Means says it is likely that found some interesting differences between beet growers don’t want the canopy to wilt and growing in the two countries – and not all of them check yield development. were in favour of the Latin American country. But with water availability being an increasing issue globally, he wonders whether, in Chile, water use will Yield potential be more controlled in future. Not surprisingly, the farms One Chilean beet grower said the two winners visited The spade is good, this season had been drier than highlighted the yield usual, with only 600mm rain potential in Chile, with and you don’t want to rather than the usual 1,000mm. beautiful-looking crops rely solely on probes, but Further north, out of the sugar basking in intense sunshine. beet growing area, the drought Average yields have at least quantify why was even more severe. reached 110t/ha, with some you’re irrigating. “Will that drive greater use growers regularly achieving of technology to use it more field yields in excess of 150t/ precisely?” wonders Mr Means. ha. The goal is to break the Currently, on sugar beet 200t/ha barrier. farms the spade is the main tool used for judging “To reach those yields, they get the canopy as when to irrigate, rather than soil moisture probes, big as possible, as quickly as possible to intercept and, while variable application is possible, it is not as much sunlight and then pour buckets of water widely used, if at all. “The spade is good, and you on all the time,” says Mr Means. “They have a lot of don’t want to rely solely on probes, but at least opportunity with the soils, water and sunlight, and quantify why you’re irrigating,” he suggests. they are utilising the same genetics as us, and a processor which is wanting as much sugar beet and sugar per hectare as possible to meet demand.” Higher N One crop drilled on 20th September had met The norm in Chile is to apply 150–230kg N/ha, across the rows in just 50 days – well ahead of the split across three or four applications through 90–100 days it usually takes a crop in the UK. With the season – far higher than the 100–120kg N/ha around double the solar radiation of the UK, the applied by growers in England. extra climatic resources give Chile’s beet growers “We use less, but our crops have less water as an enviable advantage. we don’t have the irrigation. Their canopies look fantastic – very green – but do they need to be that lush? Irrigation “In Europe, the more lush it is can sometimes Irrigation is key to the higher yields achieved, mean lower sugar contents,” says Mr Means. along with the Mediterranean climate enjoyed Typically, sugar content in Chilean beet is in the central region where sugar beet is grown. lower than in the UK. “In Chile, it’s usually around Most growers put on 700–1,000mm of water during the growing season, with a lot of the crop continued over…

June 2020 www.farmersguide.co.uk 39

38-41 Arable.indd 39

19/05/2020 14:46


Arable Mark Means (centre) and James Fretwell (right) discuss sugar beet production in Chile with Karl Munzeumayers, farm manager, Terrandes, Chillan.

season, explains Ramiro Paillalef, who manages the research and development programme for Chilean sugar beet processor IANSA. “We’ve now changed strategy to do our first application in January, and repeat applications every 21 days.” Together with improved genetic resistance, that has helped reduce spray numbers to three or four applications. Greater use of fungicides and a higher weed burden mean that for many growers, input costs are higher than in the UK. While Barbera Becker’s world-record yield is impressive, she reckons her break-even yield is 80–90t/ha (adjusted). FG

Those include rhizoctonia and weed 17 per cent, but almost a miracle for it to be over beet. The former is being addressed through breeding, while weed 18 per cent. But if you have beet – driven by the all this sunlight, the warmth, close rotation rather the moisture so you’re We’ve now changed than bolters – has led to always photosynthesising strategy to do our first the herbicide-tolerant and making carbohydrate system Conviso Smart and then sugar, why can’t it application in January, being hailed as a be higher?” he ponders. and repeat applications potential solution to To continue increasing bring it back under yields, it might be something every 21 days. control. that Chile’s growers could “It’s a tool that will investigate further, Mr Means help them, but they will need to be careful suggests. they don’t break it,” Mr Means warns. …from previous page

Sustainability vs commercial reality

Chile is a country of extremes, and to some extent that is mirrored in their sugar beet industry. For some, long-term thinking is central, while others are more swayed by short-term commercial realities of high land rents and the need to maximise their most profitable crop. The latter has driven some to adopt rotations of one-in-two, which is already throwing up agronomic challenges that could potentially threaten the longer-term sustainability of the crop on these farms, believes Mr Means.

Disease pressure Cercospora – not rust or mildew – is the main disease threat in Chile, and it drives higher use of fungicides. Typically, pressure from the disease starts in January and increases during February and March. Advice up until two seasons ago was to start applying fungicides from first observation of the disease, which could be as early as November, with continual irrigation. That could mean six or seven applications in a

Chilean sugar industry

• • • • •

One processor (IANSA), two factories in Bio Bio region (around 300 miles south of Santiago) About 13,000ha of sugar beet grown in Chile Average yields around 110t/ha Irrigation typically 800mm/ha/year Delivered price $46,000/t Chilean peso (c. £44/t)

40 www.farmersguide.co.uk June 2020

38-41 Arable.indd 40

19/05/2020 15:49


Arable

Illuminate your wheat with a touch of magic!

KWS FIREFLY n

The UK’s highest yielding Group 3

n

Great disease package, including 7.0 for Septoria and OWBM resistance

n

The joint stiffest variety on the Recommended List

KWS UK LTD, 56 Church Street, Thriplow, Nr Royston, Hertfordshire, SG8 7RE Tel: +44 (0) 1763 207300 / Fax: +44 (0) 1763 207310 / Email: info@kws-uk.com

www.kws-uk.com

38-41 Arable.indd 41

20/05/2020 08:59


Arable

Plenty to consider for winter cereal varieties The winter wheat and barley additions in the 2020/21 RL were limited in number, but it’s the new candidates hoping to make the list which really show promise. Only four new winter wheat varieties made the 2020/21 RL; three hard Group 4s and one soft Group 4. According to NIAB cereal varieties specialist Clare Leaman (pictured below right), speaking to Farmers Guide: “RGT Saki is a strong addition with good yield potential in both treated and untreated situations and therefore limited risk. It is a soft feed variety with good all-round disease resistance plus OWBM resistance, and although relatively late to mature has a lot to offer growers. “SY Insitor and KWS Kinetic are hard feeds topping this group in terms of treated yield. SY Insitor has moderate straw strength so needs to be sited away from any high risk fields and given a good PGR programme. It has shown some rust susceptibility, but has good septoria resistance. “KWS Kinetic is a shorter, stiffer type, but has very mediocre disease resistance and will need a robust fungicide programme to perform to its best. Both varieties offer OWBM resistance. “Theodore – another hard feed – has a lower treated yield but good untreated yield due to excellent resistance to both yellow rust and septoria. Growers requiring a very low risk option, for example on hard to access fields, may find this a useful choice but do need to weigh up the low specific weight.”

Potential game changer According to DSV’s UK wheat breeder Dr Matt Kerton, the headline features of Theodore could potentially make it a real game changer. “Theodore joined the 2020/21 RL last year with an 8.2 score for Septoria resistance, a 9 for yellow rust and a 7 for brown rust – combined with a height of 82cm, that gives it good resistance to lodging. “The DSV UK breeding station is located in North Oxfordshire where septoria pressure is high and disease resistance has always been a high priority for the breeding programme.

“But it is only recently, with the removal of chemistry and changes in pathogen virulences, that resistance is being taken even more seriously.” Theodore has performed very well in the trials network over the last three years with high treated and untreated yields, he says. “More and more farmers are sensibly looking at the economics of a variety rather than just its potential yield. Theodore is very much a variety for today and a great choice for the conscientious grower. “Its combination of disease resistance and agronomic properties points the way to genuinely lower cost wheat production in the future.”

New candidates Moving on to new candidates hoping to join the List later this year, Clare Leaman comments: “There are plenty of new wheat candidates. LG Seeker is being tested for breadmaking qualities and offers excellent eyespot resistance, which is hard to find currently. “Six varieties are under test for group 3 qualities, with LG Prince giving the highest treated yield whilst LG Illuminate and LG Astronomer give the best untreated yields – LG Astronomer also offering a high specific weight. All the varieties in this group currently look to have good resistance to rusts, with LG Illuminate, LG Astronomer and Merit also offering good septoria resistance. “The 10 feed candidates are split four soft and six hard, and yield wise none of them took a step forward. RGT Quicksilver offers good disease resistance but a poor specific weight and Astound offers a high untreated yield. “RGT Wolverine is notable as it has claimed resistance to BYDV and evidence suggests that this variety consistently shows lower levels of virus when compared to susceptible varieties, which of course offers a cost benefit to the grower and is bound to be of interest, and rightly so. Another year’s data will hopefully add clarity to this large group of candidates.”

Dr Matt Kerton in a field of Theodore.

Winter barley Minor changes feature on the winter barley Recommended List, with no new recommendations for malting. According to Clare: “The AHDB winter barley Recommended List see two new two-row feed varieties – KWS Hawking and Jordan. Both offer high yields, with them both performing particularly well in the east of the country. “Seven two-row feed candidates look to be offering very high yields, with Bordeaux topping this list – although limited data suggests it may require good straw management. The remaining varieties are very close in yield and all are worth keeping an eye on as another year of data is added in at harvest. “Two six-row hybrids are also in the candidate group – SY Thunderbolt offering high yields and a good specific weight although the straw looks to need good management, and SY Armadillo offering good disease resistance. Finally, Chester is under test as a malting candidate.” FG  Bastiaan Brak of AHDB demonstrating the RL varieties tool.

Easier navigation of AHDB RL AHDB has also launched a variety selection tool for winter wheat, spring barley and winter barley. The tool provides a powerful way to navigate RL data, make comparisons and identify the most promising varieties for your unique situation. Updated following the release of the AHDB RL each year, it’s expected to be extended to winter oats and winter OSR this month (June).

42 www.farmersguide.co.uk June 2020

42-45 Arable.indd 42

18/05/2020 17:08


LG MOUNTAIN

STRENGTH IN ALL EXTREMES

LG MOUNTAIN

Consistently high yielding winter barley, in contrasting seasons & regions @LGSeedsUK lgseeds.co.uk/lg-mountain

Tel: 01472 371471 lgseeds.co.uk enquiries@limagrain.co.uk

42-45 Arable.indd 43

June 2020 www.farmersguide.co.uk 43

18/05/2020 17:08


MAKING IT EASY

WITH CLOUD TECH* AS STANDARD ON AXION 800 Your next 200+hp tractor – the AXION 800 range extending from 205 to 295 horsepower. *With full fleet integration from Dataconnect – the first direct cloud-to-cloud solution for your machinery fleet, with just one system providing all your machine data. Every AXION 800 comes with extended warranty (based on hours per year) and a highly competitive monthly payment plan. Terms and Conditions apply.

The AXION 800 range complete with – EASY technology, EASY back-up, EASY finance; it’s an EASY decision.

0% 42-45 Arable.indd 44

Special finance offer now available. Contact your local salesman today for full details on this limited period offer. claas.co.uk

18/05/2020 12:49


Arable

How to improve risk management in wheat Increasingly variable growing conditions brought into sharp focus by 2019’s wet autumn drilling season are forcing many growers to think more carefully about their future wheat strategies. Adapting basic management practices and choosing varieties to suit individual growing situations more closely could do much to introduce better risk management into the crop’s production, KWS’ Dr Kirsty Richards (right) believes. “The impact of last autumn is still fresh in everybody’s mind but, in reality, this is a continuation of increasingly variable growing conditions experienced in recent years. “Unpredictable drilling periods, cold springs typified by the ‘Beast from the East’ and late harvests are all making wheat production harder than ever. “Add in reduced windows of opportunity for field operations, ongoing agrochemical revocation and a need to use inputs more wisely, and you get a good picture of the challenges many growers now face.” With this year’s new crops now being planned, growers should not be panicked into drilling early, she stresses.

“Early drilling presents the risk of additional disease pressures such as septoria which can have consequences later in the season, not to mention black-grass and BYDV, so you must try to stick to your usual drilling dates. If you usually start drilling in early October then aim for that. “But where you can reduce potential risks is to focus on drilling resilient varieties – always growing at least three of these and matching them to their optimum sowing slots.” If you are worried about the weather, think carefully about drilling logistics too, advises the company’s John Miles (pictured above right). “You already know which blocks of land you can start on maybe a little bit earlier and those that have a black-grass problem, so play the varieties in their strongest position. “Your first variety should be one with good early-drilled performance – stiff strawed, early harvest types like KWS Parkin or KWS Firefly suit this slot perfectly. You can then

use following varieties strategically depending on the biggest threats you face. “A variety like KWS Extase in the second slot, with its septoria resistance score of 8.1 and untreated yield of 10.6t/ha in the 2020/21 RL, can be used as a tool to protect against septorial load and reduce the risk of the disease pressure on your farm, significantly.” This has the added bonus of giving growers a variety that gets away quickly in the spring and holds this lead to harvest, but it also enables them to take advantage of some of the highest yielders for the later drilling spots, he points out. “If you don’t grow a top yielding Group 4 such as KWS Kerrin, you’re potentially missing out on the highest yield performance. “If you want a milling wheat in this position, especially in the second wheat slot, then KWS Zyatt would be a good choice. It’s got a strong septoria resistance which is useful for mitigating risks.” Performance of these later-drilled varieties is also important with regard to weed control, he says. “The best thing you can do to combat black-grass and stay reasonably profitable is to delay your drilling, but you also need to choose varieties that optimise this through an ability to establish well when sown late and cover the ground quickly so no room is left for weed growth.” Adding a greater range of varieties will also help with day-today management and workloads, John suggests. “Fewer available spray days due

to more variable weather conditions means most growers generally aim to get all their wheat sprayed in 2–3 days. “If you have a large area of just one variety with a specific window for certain applications, that puts a lot of pressure on. “More varieties should mean a better spread of growth stages, which mean you can manage your workload much better and sequencing your inputs in an optimal manner has got to be one of the most effective ways to maximise profitability.” It’s the same later in the year, he points out. Sequencing the drilling correctly also helps plan the harvesting. “With a range of varieties reaching maturity at different times, you can spread your combining more evenly so just as you're finishing one block, the next one is ready.

Extase establishment.

“As well as reducing the chance that all your crop becomes ready at the same time, it’s a much better approach than having to chase all over the place trying to find crops that are fit before you might lose optimum quality and yield.” FG

Grain protection you can trust

Contact the Bayer Pest Solutions team for more information at pestsolutions@bayer.com or on 00800 1214 9451

Visit our new Twitter feed for all of the latest news

@BayerPestUK

June 2020 www.farmersguide.co.uk 45

42-45 Arable.indd 45

19/05/2020 14:49


Arable which provide the route to infection and it is these that need to be coated with the fungicide to help to reduce the level of infection.”

(pyraclostrobin) and Toledo (tebuconazole) depending on risk and variety. The decision comes down to brown rust risk.

Spraying a wheat ear is a different proposition to spraying a leaf, where you’re looking at treating one side of a reasonably horizontal target.

Nozzle choice key for complete ear coverage How successfully wheat ears get protected by T3 fungicide applications could be impacted by nozzle choice, according to recent research. Although fusarium severity is highly variable from one season to another, the risk to milling wheat premiums is always there. The key driver for infection is showery weather around flowering. In previous seasons the disease has been absent in the spring only to erupt when humid and stormy weather strikes later. It means a potential yield hit, or worse, a possible mycotoxin contamination. Any chink in the T3 armoury can lead to a possible infection, which is why application and product choice is important. With the support of Silsoe Spray Applications Unit (SSAU) and Fera, Bayer has been investigating nozzle and fungicide best practice – the importance of which is being recognised by an increasing number of growers. The latest research findings from SSAU revealed that low drift nozzles such as Guardian Air can have a two-fold plus benefit in spray deposited on the ear compared to flat fan nozzles. Bayer’s Jennie Watson (pictured above), who commissioned the

research, was a little surprised by the findings. “I thought there would be a difference, but the extent did fascinate me,” she says. Research undertaken by Fera also highlighted the importance of nozzle selection. They tested angled nozzles against vertical flat fans and saw a consistent improvement in fusarium control where angled nozzles were used with Proline (prothioconazole), Folicur (tebuconazole) or Prosaro (prothioconazole + tebuconazole). But another factor is the ear itself. The SSAU trial included the winter wheat variety Skyfall. Its ear structure appears to have made it a more efficient collector of spray droplets. “With its awns it has an increased surface area and this had the highest total deposited volume of any variety,” says Mrs Watson. “The architecture of wheat ears can vary dramatically depending on the variety, which is why consideration needs to be given to effective coverage of the ear, and anthers. Ultimately it is the anthers

One farmer who feels nozzle choice is important is Kent farmer Richard Budd (pictured below right). He only grows premium wheats, with Zyatt, Skyfall, Trinity, Lili and Basset being popular choices. He prefers the forward- and backward-facing Defy 3D 0.5 nozzle. “Spraying a wheat ear is a different proposition to spraying a leaf, where you’re looking at treating one side of a reasonably horizontal target. An ear is upright and you need to treat all sides of it.” Water volume is also increased to 150-litre/ha to increase droplet size and improve ear coverage. The attention to detail is worth it in his view. “If you add up the potential loss from not hitting milling spec and the yield penalty it can be £400/ha in a worst case scenario. For us, a T3 is typically around 5 per cent of crop input expenditure. It is little in the overall scheme of things,” says Mr Budd. His agronomist, Tristan Gibbs (pictured below), says timing is also important, which is where it went wrong for some last season. “It’s a short window for T3 sprays and if you miss it there’s no curative option for fusarium. You have to go

“Prothioconazole is there for fusarium, microdochium and septoria top-up. Tebuconazole, pyraclostrobin or fluoxastrobin boost brown rust protection if needed. Tebuconazole is active against the fusarium species but offers no control against microdochium.” Both believe the importance of a T3 spray might be overlooked outside the premium wheat sector. “Fusarium is a great robber of specific weight through shrivelled grains and grain site abortion. Losses can be significant in high pressure seasons,” reckons Mr Budd. Another advocate for the Defy 3D nozzle or the Guardian Air set at an angle is Steve Gaiger, of Collyer Farm Services, Hampshire. For him, it is common sense to attack vertical targets from sideways on. “Look down on the ear and it’s a small target, not dissimilar to a blackgrass stem. It’s also not a flat target, it has grains down the side. It stands to reason that spray angled to come in on the side axis will protect spikelets better,” Mr Gaiger comments. While he believes angled nozzles are best, a similar result can be achieved without them, he says.

It’s a short window for T3 sprays and if you miss it there’s no curative option for fusarium.

when the anthers start to emerge, leave it until they are all fully out and it’s too late. If you have a big area to cover, I would suggest to go a little early. We also have to remember there’s no curative option for septoria either.” Product choice varies between Proline and Firefly (prothioconazole + fluoxastrobin), with Comet

“For those with standard flat fan nozzles, it can be done by fitting different caps to give an angled spray. Another option is to alter the angle of air sleeves if fitted, or the boom tube itself. Whilst that won’t match the performance of an angled nozzle, it is better than applying a fungicide from above,” he suggests. FG

46 www.farmersguide.co.uk June 2020

46-49 Arable.indd 46

19/05/2020 09:01


Free access to new Climate tool

The latest exciting development to Hutchinsons Omnia Precision platform, a Climate monitoring and prediction module, has been launched to UK growers with a free-to-try offer.

Climate screenshot.

Omnia’s Climate module claims to revolutionise the way in which users can access current and historical weather data to make more accurate crop management decisions. For anyone wanting to access the Climate module who does not already have Omnia, this will be possible with a free-to-access offer which allows users to create customised farm maps and access weather data for their required fields or locations. Just follow a very simple sign up process which only takes a few minutes at www. omniaprecision.co.uk, explains Hutchinsons precision technology specialist Nick Strelczuk. Omnia’s Climate module uses virtual weather stations which can be pinpointed at any location, providing weather data accurate to 1km2 of that station for a 10-day period. “This means that, on a holding that’s spread out, you can have multiple weather stations across the ground to give you more accurate information,” says Nick. Measurements provided within the module include the standard units for rainfall, temperature, windspeed and solar hours – but also, soil moisture. It is also possible to access historic and soil weather data for that site for the last 10 or 20 years. This data is generated through Iteris – the global leader in weather data – through both satellite and ground-based stations. The concept behind the Climate module comes from the Predict & Justify project at Hutchinsons national Helix farm in Northamptonshire, explains David Howard, head of integrated crop management at Hutchinsons.

“The premise of the project is to look at how data from the field can be turned into agronomical knowledge, so this means looking beyond data collection, and taking it a step further into interpreting the data to develop better and more accurate modelling to support better informed decision making on farm. “The Climate module brings together weather modelling and monitoring data and combines it with Artificial Intelligence (AI) and machine learning. This has allowed us to develop models which help to improve risk prediction on farm. “Improving the accuracy of crop modelling lends itself to proactive decision making and more accurate agronomic advice which is the cornerstone of integrated crop management,” David says. Based on this, Hutchinsons has developed three prediction models within the Climate module – crop growth, pest, disease and blight prediction modelling. The Climate module can be used for a wide range of agronomic decisions, that help to substantiate and evidence agronomic practices, points out David. “A real life example from the Helix farm last year played out when we had low rainfall during the peak growing season and a decision had to be made on reducing or cutting out the final nitrogen dressing. “However, the weather data in the Climate module showed that rain was predicted and that particular fields had adequate moisture to achieve yield potential – and in fact this crop yielded 10t/ha, which wouldn’t have been possible without the additional nitrogen.” FG

Free Your Data Is your farm data stuck in a clunky or difficult to use mapping system? Why not try Omnia Access for free to see how our powerful, yet easy to use mapping and precision farming system can benefit you.

SIGN UP FOR FREE!

Get farm-specific 5-day weather forecasts for free Go to omniaprecision.co.uk for more details and sign up for free now

Crop growth screenshot.

June 2020 www.farmersguide.co.uk 47

46-49 Arable.indd 47

20/05/2020 09:08


Arable Jack Russell seed mixture in full flower.

Seed mix keeps conservation options open A wild bird seed mixture from Limagrain is proving popular, as farmers and growers are looking more towards sowing a multi-purpose game cover crop which also meets conservation needs. According to Limagrain’s Martin Titley, the Jack Russell mixture comprising spring triticale, millets, oilseed radish, grain sorghum and sunflower is attracting a lot of interest this season. “The uncertainty surrounding shooting this year is putting some growers off relying too much on game maize, and many want a crop that is better for conservation and meets the specifications if they are on the Countryside Stewardship Scheme (CSS). “This wild bird seed mixture can offer it all. It is suitable for CSS options AB9 and OP2, attracts farmland birds and also offers game bird cover.” James Grantham (pictured right), based in south Lincolnshire, agrees. An Agrii agronomist, he also helps to run his family’s arable unit and small family shoot and grows Jack Russell in blocks on the farm. “This crop isn’t used just for a cover crop for game birds, but also because it’s a useful crop for feeding game and wild birds. It also suits some of the environmental schemes that we’re in,” he explains. “Jack Russell is suitable for the CSS option AB9 and, because it attracts and supports farmland birds and insects, it helps us to meet both Entry Level and Higher Level Scheme requirements. And my clients who also grow the mixture for game cover would agree that it also helps them to tick the environmental scheme boxes. “It’s a multi-tasker – that’s just one reason why it’s an attractive option for growers. It offers three

things – game cover, wild bird feed and CSS compliance.” James has a client who switched from growing maize as a game cover crop to Jack Russell because he had a large population of deer on his farm. “In dry conditions, like those we’re experiencing at the moment, food can be scarce for deer and newly emerging maize shoots are very inviting. Deer love this crop and will graze it hard. “But they don’t seem to like sorghum, which is a key component in this mixture. And I have a client who has grown it in place of maize for the past two years and it gives plenty of game cover, plus the other environment benefits of growing a more diverse crop.” He adds that for commercial shoots – with or without a deer problem – Jack Russell is an attractive option for game cover, simply because it ticks more boxes. “Around 75 per cent of my clients would be growing Jack Russell as game cover and the remaining 25 per cent to meet CSS requirements.” James grows the crop in blocks, rather than field margins, sowing in May once there’s been sufficient rain. “There has to be moisture in the light sandy Lincolnshire soils to ensure germination. And sorghum doesn’t like cold soil, so I’m looking for temperatures above 10ºC.” The mixture of species in Jack Russell brings multiple benefits. Sunflowers offer a very colourful crop, and the triticale and millet offer a seed source at variable heights. The inclusion of grain sorghum gives

structure and promotes the mixture’s winter hardiness, with millet seed shed from early autumn and oilseed radish providing later feed. The standing power of this grain sorghum provides cover for many birds and is particularly popular with shoots because of its ability to provide driving cover. “Shoots can tick all the boxes without taking too much land out of commercial use – this is a multi-tasker,” adds James. Another attraction is the lack of kale in the mix. “Some game crop and environmental mixtures include kale. Jack Russell doesn’t. Growers like this – particularly in Lincolnshire – because kale can attract flea beetle which is a UK-wide problem and it’s certainly a serious issue for OSR growers in Lincolnshire.

“You can spray for flea beetle but, again, spraying an environmental crop with an insecticide is as daft as it sounds. Growers don’t want to be doing that – it’s time consuming and expensive.” He does think that some potential growers are also put off because the mix contains several species and is more difficult to ‘keep clean’ with a herbicide, but Stomp Aqua is an option if necessary. “That’s why some prefer to stick with maize, despite it not helping with CSS or wild bird and insect populations. They want a weed-free crop with a clear ‘bottom’ to allow birds to move around more easily. “But I have some clients who have switched to Jack Russell this year due to uncertainly around Covid-19 restrictions. They’re looking to tick other boxes this year, rather than simply focusing on game birds. “They’re thinking in broader terms about the environment and looking improve biodiversity on their farms. Mixtures that are very good for the environment – that attract and support insects and wild birds – are great options.”

Sunflowers at RSPB Fram

pton.

SEED MIXTURE ADDS VALUE AT RSPB FRAMPTON The value of growing Jack Russell as an environmental crop for attracting wild birds was demonstrated at the RSPB reserve at Frampton Marsh, near Boston in Lincolnshire, where three acres were grown in 2019. “We were pleased with how the mixture performed,” says RSPB Frampton’s warden Toby Collett. “The sunflowers are the obvious feature and attract bees and other pollinators, including hoverflies and butterflies, during the summer.” As the heads mature and

produce seed, the insects are replaced by seed-eating birds. “At Frampton this means particularly large flocks of declining house sparrows, but also good numbers of greenfinches.” He adds that the other species in the mixture provide feed for pheasants, partridges, finches and buntings. “The plants seed at different heights to suit different species and they shed seed from early autumn and through until Christmas,” he says, confirming that, due to its success, Jack Russell is being used again in 2020. FG

48 www.farmersguide.co.uk June 2020

46-49 Arable.indd 48

19/05/2020 09:03


Arable

TOGETHER.

Even in this exceptional situation, BKT is always by the farmers’ side, who have shown great passion and responsibility while they have been doing their job in the fields – incessantly. It is thanks to farmers that the companies in the agro-food chain are able to continue their business activities and that all families have enough fruits of the earth to put on the table. Together, we will never stop.

IMPORTER FOR THE UK

46-49 Arable.indd 49

Tel: +44 0151 728 4171 bkt_enquiries@kirkbytyres.co.uk www.kirkbytyres.co.uk

19/05/2020 09:04


DO YOU FARM IN OR AROUND THIS AREA OF THE ESSEX/SUFFOLK BORDER?

If so, we’d like to buy your straw in the swath!

50-51 News.indd 50

CONTRACTING SERVICES AVAILABLE • 120x90 high density baling • bale chasing and stacking in 120x90 and 120x130 bale sizes • bale wrapping • 300hp man and tractor • 250hp man and tractor • grain/silage trailer hire

PREMIUM QUALITY ROYALSTAR WHITE FLAKE DUST EXTRACTED WOOD SHAVINGS ALWAYS AVAILABLE • soft small flake virgin wood shavings • affordable pricing • delivery available in the area above • bulk order discounts available

HAY AND STRAW ALSO BOUGHT IN THE STACK ALL YEAR-ROUND AT COMPETITIVE PRICES

71553

Based in Toppesfield, Essex, we are a small contracting company specialising in straw baling, supplying the renewable energy, animal bedding and export markets We are currently looking for a further 800 to 1000 acres of cereal straw and 600 to 800 acres of OSR straw for the coming harvest Using up to date machinery to minimise down time, low ground pressure tyres to minimise compaction and only operating in a small geographic area, we can offer you a timely and professional service including: • rapid baling and clearance of bales from the field • immediate stack clearance during harvest (no waste bales or tops!) • immediate payment • reliable and friendly service • all crop types wanted - wheat, rye, barley, oats, OSR •50 bonuswww.farmersguide.co.uk paid for OSR and rye straw June 2020

Please call or email Will Murphy for more information and straw pricing on

07704 246108 – will@wrmagri.co.uk 19/05/2020 10:31


News

Sugar beet harvester range pushes forward The Vervaet Q-Series sugar beet harvester range was first launched over three years ago. Since then the Q-616 has established itself as the worthy successor of the legendary Beet Eater 617, although the latter still remains the UK’s most prolific sugar beet harvester. Vervaet’s ongoing policy of continuing development has resulted in some updates to the specification of new machines for the 2020/21 season. These include a new touchscreen inside the cab, for control and monitoring of functions; a new traction control system; an improved levelling system for working on hillsides; and a new

automatic tank filling system using ultrasonic sensors. “As the replacement for the 617, the Q-Series had big shoes to fill,” notes Jeremy Riley, managing director of sole UK importers, J Riley Beet Harvesters (UK) Ltd. “But over the last three years, it’s constantly proven itself as a market leader. Despite contractors in some areas having only just finished lifting after an extremely arduous campaign, we’ve had a very good response from our customers, with eight new Q-Series machines ordered so far for the 2020/21 campaign.” The company reports no issues whilst continuing to comply with the government’s latest Covid-19 advice. Parts availability has not been affected with everything in stock as usual. In the Netherlands, Vervaet’s state-ofthe-art production facility is still operating at full capacity. FG

New range of mounted ploughs unveiled Family-owned company Ovlac recently launched a new range of mounted ploughs, Xperience, onto the UK market. The new XP range of highperformance ploughs are living up to their name, says UK importer Halse. The combined retailed machines are already out ploughing – clocking up well over 10,000 acres to date – and have been extremely well received by end users, with feedback indicating fuel savings of up to 1.5-litres/hr. Xperience ploughs use much of the technology from the 160–300 series, with beam design now enhanced with a parallelogram system that links headstock to frame, providing a powerful precise control of the front furrow.

Jacobsens-GFM

Other unique features include the new-design mouldboard legs to further improve trash flow; neat damage-free passage of hydraulic pipes though the centre of headstock; and hydraulic pressure gauge mounted on headstock with permanent coupling to tractor, which allows pressure to be altered on the move, if required. There is also an easy mounting choice of depth wheel – be it at the beam end, or advanced for the ability to plough tight to field boundaries. Ovlac’s complete range of ploughs extends to over 400 versions and has become one of the largest plough configurations available in Europe. This range has been steadily increased over the last 84 years to cater for the vastly different soil types and evolving tractor power and innovations. FG

Contact: Symon Jacobsen Tel 01561 361 340 • Mob 07973 542 142 Email: symon@jacobsens-gfm.co.uk www.jacobsens-gfm.co.uk

6R’s Linkages & PTOs available ex stock

FP-PACK WEIGHT • 800 or 1000kg main block

• 400 or 600kg slide in base

• 2.7 ton – 5.0 ton lift capacity • loader compatible • fixed, floating or folded positions of lift • PTO can be retrofitted at any time

• Save fuel , time and increase productivity? • Come and have a chat and see what we can offer you

k

Available in 6”, 8” or 10” widths

71334

71553

Steinbauer Tuning Modules

Available for  Case  Claas  Deutz  John Deere  Landini  Massey Ferguson  McCormick  New Holland  Steyr  Zetor

June 2020 www.farmersguide.co.uk 51

50-51 News.indd 51

19/05/2020 14:32


INDUSTRIAL DOORS & STEEL BUILDINGS

(NORFOLK)

69655

INDUSTRIAL DOORS & STEEL BUILDINGS

We specialise in the supply, installation and repair of all types of industrial and agricultural doors including • roller shutters • sliding doors t: 01508 813553 m: 07935 117752 • steel security doors www.sclnorfolk.co.uk • high speed doors e: john@sclnorfolk.co.uk • folding shutters Summer Cottage, Station Road, Forncett St Peters, Norwich NR16 1HZ • PVC curtains he y 40s in t dustr ar in ye tter u sh

STEEL ROLLER

SHUTTER

HD FLAIL SHREDDERS

DOORS We offer a made-to-measure solution to secure workshops and grain stores • Steel roller shutters can be operated by hand chain or electric using 3 phase or single phase motors • Standard finish is galvanised with colour options of Plastisol or Powder Coating • Access doors built into the shutter or positioned in the existing walls are also available • Shutters can be made up to 8m wide with wind anchors standard over 4.5m • With 40 years experience in the roller shutter industry call us anytime for a competitive price.

t: 01353 725 151 e: david@russellmillarltd.co.uk

3D FLEX HEADSTOCK • Trailed suspension; adjustable groud pressure relief • 3D levelling; mower 100% flat when tractor drives in the furrow • Super-offset to cover the working range of a reversible 5-share plough • Working width up to 3.20 m, heavy duty frame + driveline

PERFECT-Van Wamel (Netherlands) | +31 (0)487 59 29 44

www.vanwamel.nl

52 www.farmersguide.co.uk June 2020

Merlo.indd 52

15/05/2020 14:36


Machinery

No need to check out competition as farm remains loyal to brand When Essex arable farming business JR Crayston & Sons Ltd updated its telehandler last year, the brand chosen was the same as its previous two machines. David Williams visited to find out why it appeals. As on many other UK farms, the Craystons' materials handler is one of the most frequently used machines, working most days. The farm’s first telehandler – a Sanderson Teleporter – was bought in the 1990s and, in 2002, this was replaced by a Merlo P33.7. A Merlo P38.10 followed in 2009 and last year an ex-demonstration TF50.8170 became the third of the brand to be owned by the family. The Craystons farm approximately 1,000ha across two main sites, including heavy land at Pebmarsh, near Halstead and slightly lighter medium soils at Feering, near Colchester, Essex.

“My great-grandfather moved to north Essex in the early 1900s and our family has farmed in the area ever since,” explained farmer Steve Crayston. “My father moved to Pebmarsh in 1956, and in 2015 we bought Hunts Hall, which is now our main base.” Crops are predominantly wheat with focus on Group 3s, oilseed

We are always busy, and our materials handler has a role in most aspects of our business.

rape, spring barley, spring oats, sugar beet, borage, echium and maize, with 20ha let annually to a local potato grower. Fruit used to feature in the cropping including blackcurrants, and the family continues propagating blackcurrant root stock for Ribena’s contracted growers.

Diversification Diversification activities include a busy livery yard, letting of redundant buildings for industrial use, and there is a large fishing lake used by a fishing club. Until January 2020, there was also a poultry enterprise with layer-breeders produced under contract, but this arrangement finished earlier this year and a new business (Tall Elms Storage), has been set up offering specialist storage in the empty sheds. Another recent project is Woodchests Glamping – a glamping site which opened last year. “We are always busy, and our materials handler has a role in most aspects of our business,” explained Steve. “Our sites are eight miles apart, but narrow roads mean the journey takes 20 minutes by car and The Turbofarmer HD T50.8-170 CVT with a 3.0m3 grain bucket allows rapid loading of lorries.

Steve Crayston is pictured with his Merlo loader.

30 minutes in the handler.” Steve farms with his father Jim, who lives at Pebmarsh, and his uncle Robert who is based at Feering and all were involved in the handler buying decision. “Options included running two older machines – one at each site, or investing in a single new machine with increased capacity and which would be better on the road.”

Main activities The handler performs a wide variety of general lifting and transport tasks, but its main activities include pushing up and loading grain, handling and transporting seed and granular fertiliser in 1t bags, and farm track construction and maintenance. A recent major task was creating vehicle access to the new glamping site’s rural location, and a purpose-built track laying implement was made for the rear of a tractor. “It makes the job easier,” explained Steve, “but there was a lot continued over…

June 2020 www.farmersguide.co.uk 53

Merlo.indd 53

15/05/2020 14:37


Machinery …from previous page

of material for the handler to load and transport.”

Loyal to brand and dealer

Steve Crayston says the cab’s full suspension provides better ride comfort than the farm’s tractors.

The Craystons decided that replacing the current machine with a single, newer model better suited to road work would be the best option and, having got on so well with the two previous Merlo handlers and local dealer RC Boreham & Co, they didn’t look elsewhere. A demonstration Merlo Turbofarmer HD T50.8-170 CVT was trialled as a logical upgrade from the farm’s P38.10. “We don’t handle bales so lift height wasn’t an issue, but loading lorries quickly and safely was a key requirement. Since we bought our previous machine all new handlers have additional safety features to help prevent overloading, and we opted to go up a size to ensure we remained well within the handler’s working capabilities. The T50.8-170 has Merlo’s Dynamic Load Control system, and lifts over a tonne more, but to 8m rather than 10m. It’s also 170hp, whereas our previous machine was only 140hp.” “We’ve represented Merlo for

The main control joystick includes a forward/reverse shuttle switch and there are selectable operating modes. There is a comprehensive information display which can also count loading cycles, but as the Craystons weigh all produce in and out of the yard this feature isn’t used currently.

comfortable and full suspension gives a better ride than our tractors – it’s brilliant.” Steve said the cab design is generally improved, and a big advantage is while working with attachments at height the curved front screen allows a clear view whereas previously this was obscured by the front section of

The latest cab is more comfortable and full suspension gives a better ride than our tractors – it’s brilliant.

The cab is described as excellent. The curved screen provides a clear view of the attachment when working at height.

A camera has been added to provide a view of the trailer hitch which was black on arrival but has since been painted orange.

more than 20 years,” explained RC Boreham director, Matt Boreham. “It’s a great brand to offer – reliable and popular with users and with models to suit all farm types from livestock to larger arable units, and we also supply industrial users and construction sites. “Users appreciate the great manoeuvrability and visibility making them easier to operate in confined areas, and the cabs are spacious and comfortable. Compared to competitor models with similar lift height and capacity, Merlo machines tend to feel easier to use and more compact, and of course they are very reliable.”

All-round improvements

The Craystons’ Merlo will work approximately 500 hours per year, carrying out a wide variety of tasks including handling aggregate for track construction and maintenance.

The demonstration Merlo proved popular with Steve and his team, and a deal was agreed to trade in the farm’s 38.10. “The 170hp engine and more efficient CVT transmission mean loaded trailers are handled more easily,” he commented. “It’s a lot better on the road, and high travel speeds are maintained on slopes where the previous handler struggled. The latest cab is more

the cab roof. He said visibility to the right over the boom is also better, probably because the cab is slightly higher due to the suspension. The new cab layout is preferred, including better controls. The main joystick includes new functions. Previously, forward or reverse was selected by a steering column-mounted lever, but now a switch on the joystick is quicker and more convenient. On the road the previous turn-indicator switch was an annoyance as it was pushed forward or back to select left or right. This confused less familiar operators, and the new handler’s conventional stalk-type control is preferred. Selfcancelling is not included which Steve finds frustrating, commenting that it’s standard now on most modern farm machinery. The heater and air conditioning are improved, and LED work lights are described as excellent, although the road lights are less effective.

Using the performance A complication of upgrading the machine was a different attachment mount with three locking pins,

54 www.farmersguide.co.uk June 2020

52-55 Merlo.indd 54

20/05/2020 09:17


rather than one previously. A new 3m3 bucket was ordered to make the most of the lift capacity, and other attachments including the bag lift and grain pusher were modified to suit. A new sweeper-collector has been ordered, and Steve explained that its arrival will make it easier to keep the site tidy – a priority as more industrial and retail companies utilise the redundant farm buildings. With its infinitely variable CVT transmission and flexible hydraulics, the new handler will be ideal allowing engine speed and hydraulic flow to be set to maintain constant brush speed, while the foot pedal controls rate of travel.

Efficient loading Steve said the extra power and more efficient transmission have made a big difference to operating efficiency, and the higher specification also includes various operating modes to suit different applications. As well as having more lift capacity, cycle times are improved. “We store grain in 180t bins and on the floor, but we always load from the floor as it’s quicker than relying on elderly augers and conveyors,” explained Steve. “When grain is sold, we try to load 5–10 lorries in a single day rather than wasting time waiting for just one or two to turn up. We re-handle a lot of grain moving it from bins to the floor stores ready for loading, but this allows us to load fleets of lorries very quickly so it’s quite efficient.” Steve said the new Merlo’s higher work rate isn’t only due to its higher load capacity, but also because the hydraulics are much quicker. “I particularly like the auto revving joystick mode, which senses hydraulic flow demand

T50.8-170 specs Max lift capacity Max height Max reach Engine Transmission Max speed Hydraulic flow

5.0t 7.8m 4.2m FPT-170hp CVTronic 40kph 150 litres/min

NO PAIN MORE GRAIN

and increases or decreases the engine speed to achieve the supply needed. The foot pedal effectively becomes the drive control, and travel speed is independent of the engine and hydraulics. As the proportional joystick is pushed further in any direction for faster boom or attachment movement, the engine and hydraulics respond accordingly. When the joystick is released, the engine speed reduces – saving fuel and allowing quieter operation.”

Practical and safe Asked whether Merlo’s latest overload protection system complicates the handler’s use, Steve said it hasn’t proved an issue. “Even with its extra capacity over the previous machine, we can overload it – particularly handling aggregate or soil. When it’s over-loaded, the boom and attachment movement freezes, then the operator simply retracts the boom until stability is achieved, and full operation returns. It’s safer for users. I also like the clear load charts which are attached to the right-hand window for quick reference. Similar charts were included with the previous machine but, because they were tucked away in a compartment below the dashboard, they were far less likely to be used.”

MOVE MORE WITH OUR TURBOFARMER RANGE The heavy duty Turbofarmer range offers two models designed for the toughest of tasks. The TF45.11 and TF50.8 give a lift capacity from 4.5 to 5 tonne with 11 and 8 meters lift height. The 170hp engine is combined with the choice of two transmissions, hydrostatic or CVTronic giving smooth acceleration from 0 to 40kph without interrupting torque. Both models are available with cab suspension to further enhance cab comfort.

Verdict

Steve Crayston says the load charts, on the right-hand cab window, are easy to check at a glance.

Steve confirmed that he has no doubts that the right machine was selected. “All the operators like it. It’s got plenty of power, it performs superbly on the road towing 8t of feriliser to the fields, and it’s really comfortable. For time-sensitive tasks such as loading lorries it’s very quick, which is due to its ability to easily handle the large grain bucket and the fast cycle times. “The service from RC Boreham remains as good as ever, and when we did have a minor issue early on, it was sorted quickly. We are happy that we made the right decision regarding the brand and moving up a size, and would probably choose the same again,” he concluded. FG

TONNE

Record breaking ergonomic cab designs

Patented frame leveling on selected models

up to 5 tonne lifting capacity

Unique CVTronic transmission on selected models

ADVANCED TECHNOLOGY

www.merlo.co.uk June 2020 www.farmersguide.co.uk 55

52-55 Merlo.indd 55

20/05/2020 09:35


OLIVERS – Supporting your business every day

To discuss efficient machinery solutions, contact us to arrange your consultation. OLIVERS Luton Tel: 01582 727111

OLIVERS Petworth Tel: 01798 343660

OLIVERS Reading Tel: 01189 723741

OLIVERS Tingewick Tel: 01280 848494

OLIVERS Winchester Tel: 01962 774590

www.oliveragriculture.co.uk /Oliveragri @Oliveragri @Oliversagri

Spread-a-Bale

56-59 Olivers Dealer profile.indd 56

®

18/05/2020 11:30


Machinery Claas Axion 800-series tractors are proving especially popular with Olivers’ customers.

Serving farmers for almost 200 years A large increase to a long-established agricultural dealer’s trading area has unlocked customer access to an even wider range of quality franchises – and even better service. David Williams reports. ‘Olivers’ started serving Bedfordshire farmers in 1823, when steam ploughing and threshing contractor James Oliver set up his business. It later became AT Oliver & Sons and was the UK’s first independent Claas dealership in 1947, when it was appointed by importer J Mann & Son. The dealer remains family owned, and supplies and services the brand through its Oliver Agriculture depots at Luton, Beds; Tingewick, Bucks; Reading, Berks; Winchester, Hampshire and Petworth, Sussex; while sister company Oliver Landpower represents key brands JCB and Amazone along with complementary franchises through its groundcare division, including Toro, Husqvarna and Isuzu, from depots at Kings Langley, Herts; Luton and Tingewick.

Recent expansion The area served by Oliver Agriculture has expanded since 2015 when it acquired its Reading depot – formerly part of the Claas Southern Harvesters group. In 2018, two additional depots were acquired including Olivers Petworth – also formerly part of Claas Southern, and Olivers Winchester – formerly part of Claas Western. The acquisition included each dealer’s franchises as well as transfer of all sales, service and parts staff – ensuring superb continuity of service for customers. Currently, the group employs 136 staff – many in customer service. Through its acquisitions, Oliver Agriculture expanded from three to five branches – and business growth has created additional

jobs at Winchester and Petworth, including apprentice parts advisors and service engineers through the Claas Apprenticeship scheme. These are in addition to increased staff at the Luton head office and sales/ demonstrator positions in both the north and south of the territory.

Sales and service Counties served through the five branches include Bedfordshire, Hertfordshire, Buckinghamshire, Oxfordshire, Berkshire, Surrey, Hampshire, Sussex, and the Isle of Wight in collaboration with service agent M Rickard Agri Services Ltd. Previous Petworth and Winchester branch customers have benefitted since Olivers’ acquisition, through many additional franchises.

As well as industry-leading service and support for Claas products, these depots now also represent Horsch drills, sprayers and cultivation equipment; Abbey tankers and feeders; Dal-Bo rolls and seedbed cultivators; Maschio flail mowers, power harrows and ploughs; and Gaspardo maize drills. Other brands include Grange Machinery lowdisturbance subsoilers; Bunning manure spreaders; KRM Bredal spreaders and Bogballe fertiliser spreaders; Richard Western trailers; Samson slurry tankers; Spread-a-Bale straw spreaders; Spearhead Flex-Wing and Reach mowers; and Tanco wrappers. Rapid business growth meant the new Petworth depot has already been expanded to include an additional fourth workshop bay. This is used mainly for tractor servicing, and the new building also provides parts storage for the additional brands.

Professional service At all five sites, Oliver Agriculture engineers have access to fully equipped service vans, and continuous investment in manufacturer-led training ensures rapid fault diagnosis and minimum machine downtime, especially during harvest. Efficient parts supply is crucial and, as well as having direct access to manufacturers’ inventories, Olivers holds fast-moving and seasonal parts on its shelves. Despite the challenging start to this year caused by inclement weather, Olivers has reported a busy spring with buoyant new and used equipment sales. continued over…

n.

Olivers apprentices recently graduated from the Claas Engineering Apprenticeship scheme at Reaseheath College. (l-r) William Rogers (Olivers Reading) Henry Walsh (Olivers Winchester) and Steven Jackson (Olivers Luton) attained Level 3 Extended Diplomas in Land Based Technology.

At Luton, senior engineer John Thompson mentors new recruits passing on over 48 years of expertise. He is pictured (centre) with apprentices Matthew Savill (left) and March Chisholm-Renals.

John Thompson is pictured with Cambridgeshire farmer Mike Tebbit of Green Track Farming while servicing the farm’s Lexion 770TT ready for the 2020 harvest.

June 2020 www.farmersguide.co.uk 57

56-59 Olivers Dealer profile.indd 57

19/05/2020 10:46


approximately 20 per cent of the dealer’s annual turnover.

held in stock across all five branches for immediate availability.

Claas

In demand

Attracting a lot of interest this season are the latest Claas 7000and 8000-series Lexion combines and Jaguar forage harvesters. Tractors across the series are also updated around the introduction of latest engines meeting Stage 5 emissions standards.

A number of products from Olivers’ extensive portfolio have been in especially high demand. “We are having a very successful year for harvesters,” reported William. “Combine sales have been excellent, including the latest Lexions with new, larger threshing and separation systems for superb performance in all crops and conditions. Tucano models are also selling well following successful demonstrations last harvest. The latest Jaguar forage harvesters have also proved popular, especially from our Petworth and Winchester depots where their efficiency and performance are valued by professional users. Crop throughput up to 380t/hr is impressive and sales have been to both current Claas owners and to users of competitor brands.” Tractor sales are also increasing, including to farmers moving from other manufacturers. “The Axion 800-series has the 200–300hp market covered, offering outstanding operator comfort and ease of operation. They are light enough for top work but have the power and ballasting capability for primary cultivations too, and the technology level assures compatibility with the most demanding implements.” Claas balers are also in demand, he added. “Reliability and durability are essential which is why the Rollant 540RC fixed chamber baler was introduced. It makes 1.22 x 1.25m bales and was developed in the UK and Ireland for exceptional performance in challenging working conditions.”

Horsch  This Lexion 650 with a V770 cutterbar was sold by Luton depot-based field sales manager Rex Hedges. When photographed, it was awaiting delivery to a customer who has run six previous sixwalker Lexions, all supplied by Olivers.  Olivers has put in procedures to ensure excellent service continues while customers and staff are protected during the Covid-19 pandemic. Each depot has created safe parts collection areas. …from previous page

Covid-19 contingency “Despite the current challenges posed by Coronavirus, we have still been trading well with good resilience in our systems to facilitate remote working for our administration department and continued aftersales support to our core agricultural customers, with service and parts departments functioning to capacity. The sales team has always had inherent autonomy to be able to function independently and with the wide use of technology including video meetings and web-based systems,” explained managing director David Jarman. “This has enabled us to maintain running of our seasonal business to a highly satisfactory level, and is a credit to our staff who have gone above and beyond at this time.” Olivers sales representatives continue to see customers by appointment while maintaining social distancing guidelines although, where possible, customers are

asked to make contact by phone or email. If demonstrations are required immediately then special arrangements are accommodated, but where possible these are being delayed until restrictions are relaxed.

Best product offering Sales director for Olivers’ northern trading area William Helliwell explained that part of the reason for the dealer’s continuing strong sales is its range of quality franchises. Horsch drills remain popular, with the Sprinter’s versatility and ability to operate in wide ranging conditions making it a firm favourite with many customers in the trading area. The Avatar single disc drill is an excellent choice for those adopting no-till systems, while the Pronto cultivator disc drill can be used within conventional establishment regimes, or as a no-till disc drill without its front cultivation elements, when conditions allow. William commented that sales growth of Horsch products means the brand now accounts for

The biggest news from Horsch this year are new Leeb self-propelled sprayers. These have 6,000- or 8,000-litre tanks, a new operator station and improved boom performance in conjunction with an entirely new ComfortDrive chassis featuring hydro-pneumatic individual wheel suspension with active level control providing superb comfort on the road and in the field. Horsch has also introduced its Hybrid Farming system – including four new products combining the best practices of organic and conventional farming, for weed control without glyphosate.

KRM Carre Mechanical Inter-row Hoe – the Carre inter-row weeder is generating interest from many of the dealer’s customers for its ability to reduce chemical inputs. Camera and GPS guidance systems are available, and optional features include section control with tillage units lifted or lowered automatically.

New brand Spearhead Machinery was taken on in late 2018. Products including Flex-Wing mowers and hedge cutters have been very popular, with features appealing to farmers and contractors. Machines and parts are

Spearhead is a new franchise to Olive rs and available through all branches.

Sales support/demonstrator Will Burman is pictured checking the performance of a new Horsch Pronto 6DC drill while social distancing, on a Bedfordshire farm.

Other brand highlights Bunning Lowlander Mk2 150 HBD, Lowlander Mk2 175 HBD & Lowlander Widebody 230 HBD muck spreaders have proved especially popular and a record number were sold last year, while sales for 2020 to date are similar. KRM Bogballe M35W fertiliser spreaders – these feature simple settings and adjustments, wash deflectors and hinged guards for easy cleaning, flexi-coat paint for long lasting protection, and Dynamic Section Control which automatically adjusts working width, application rate and spread pattern. “We don’t

58 www.farmersguide.co.uk June 2020

56-59 Olivers Dealer profile.indd 58

18/05/2020 14:35


Machinery Pictured on its first day of work with owner ACS Ltd, this Jaguar 950PW forage harvester had been sold by field sales manager Gavin Elliott and was installed with the customer by sales support/ demonstrator Charlie Tibble, while ‘social distancing’.

Looking ahead

believe there is a better spreader available,” confirmed William. Dal-Bo rolls offer unrivalled performance and durability, he continued, adding that the PowerRoll Limited ‘Black edition’, celebrating 10 years of Dal-Bo’s availability in the UK, has proved a success. The five-section roller is available in 10.3–18.3m working widths and comes with a six-year warranty. Grange Machinery’s LDT Low Disturbance Toolbar is also proving popular. With leading cutter discs followed by deep cultivation legs, it mounts direct to the tractor and incorporates three-point hydraulic linkage for implements and drills.

Abbey and Samson slurry tankers and applicators provide an ideal solution for Olivers’ customers. “There are many larger livestock units and anaerobic digester plants in the south-east and our professional specification slurry tankers can only be described as ideal for slurry and digestate applications,” said sales director for the south of Olivers' area, Russell Hallam, who joined from Claas Southern at the time of the acquisition. “With movement away from splash-plates to systems which are more environmentally friendly and make better use of the available nutrients, we expect continuing demand.”

Olivers’ sales teams are expecting a busy autumn, based on the growing number of demonstration requests. “The latest Liebherrmanufactured Claas Scorpion handlers have proved a real success and their performance and ease of use has encouraged many farms to move from competitor brands,” continued Russell. “Recent sales include Scorpion 736, 741 and 756 models and features including the Smart Loading automatic return bucket system, automatic load weighing, plus superb visibility and manoeuvrability mean we expect their popularity to continue. “The Grange 6m LDL (low disturbance loosener) was launched at Lamma and is the widest version to date. With a mounted seed hopper and distributor, it will suit larger farms for oilseed rape and cover crop establishment.”

Russell said that the Avatar drill will be a Horsch range highlight this autumn, offering opportunities to improve soil structure, reduce costs and help in the fight against black-grass.

Successful strategy David Jarman summarises the Olivers ethos; to provide excellent customer care by offering a consultative process where we recognise our customers’ challenges and work with them to find the most effective whole-life solution to their machinery needs. Olivers has always been a service-focused business and prides itself on employing staff who care about agriculture and who will always go the extra mile to get the job done. “We have always been successful in nurturing apprentices, and despite the Covid-19 pandemic we have taken on four new recruits for the 2020 intake. Currently we are also recruiting experienced service engineers to ensure we provide the very best service as our business grows, and are keen to hear from anyone interested in joining our enthusiastic team,” he confirmed. FG

Maximum efficiency – we’ve got it covered.

CLAAS EASTERN Please contact your local CLAAS Eastern branch or call EASTERN Sleaford (Head Office) on Tel: 01529 303093

Please contact OLIVERS Samson Specialist: Rex Hedges 07595 195038 or call OLIVERS Luton (Head Office) on Tel: 01582 727111

Efficiency – Durability – Reliability

56-59 Olivers Dealer profile.indd 59

18/05/2020 14:35


KRAMER TELEHANDLERS TO THE NEXT LEVEL

KRAMER

NEW

Kramer Telehandlers with Stage V The telehandlers will also get some new features besides the stage V engines: • A perfect all-round visibility • Two optional cabin heights • Manual crab steering as fourth steering mode These are only three of many innovations of the telehandlers. Convince yourself! Contact your local dealer: www.kramer.de/dealerlocator 20200318_EN_KA_EMENA_AD_FarmersGuide_210x148_3_Mai.indd 1

30.04.2020 16:21:25

Crop Baling Products

CLAAS Big Baler Twine QUODOTEX 3400, QUODOTEX 3200, BALETEX 130 XL Long

CLAAS Netwrap ROLLATEX PRO 4500, ROLLATEX 3800 & ROLLATEX Classic 3000

CLAAS Silage Stretchfilm WRAPEX Classic XL 1650 & WRAPEX 1500

60 www.farmersguide.co.uk June 2020

60-63 News.indd 60

15/05/2020 14:58


S

21:25

News

New main dealers boost service and support

(Left to right) John Forrest, Susan Metcalf, Raymond Metcalf and Dave Bennet.

Lancashire and Essex-based companies say they are proud to represent Krone in their areas as the firm announces new dealers. contractor John Forrest (Fez) to Krone UK has appointed Lancashireboost our existing sales team. based Metcalf Ag Engineers and “We were Lely dealers until the Essex-based Adcock Agri Ltd as company was bought by Agco, which main dealers, to strengthen its left a gap in our portfolio,” he says. distribution and support network. “We are very excited by the Krone “We pride ourselves on appointment and proud to represent manufacturing forage equipment such a quality brand in the area.” at the cutting edge of technology and we are delighted to appoint two dealers who share our dedication to providing the highest level of service and maintenance support and back-up,” says Krone UK’s managing director Marcus Oliver. Metcalf Ag Engineers has a dedicated and experienced team of engineers able to provide excellent back-up and service Adcock Agri Ltd managing director, Tim Adcock. on the full range of Krone equipment. The family business has over 40 years’ Adcock Agri Ltd managing experience in the sale and repair of director Tim Adcock says that his agricultural tractors and machinery, company is perfectly placed to supplying to farmers, contractors provide Essex grass and forage and local authorities. farmers with arguably the top brand of forage and grassland equipment in the UK, from self-propelled We are very excited forage harvesters to the smallest by the Krone appointment tedder. This is backed up with an experienced sales team and four and proud to represent service back-up technicians. such a quality brand “We are very pleased to be covering Essex as Krone’s new dealer. in the area. The brand fits well within our existing franchise portfolio, which includes “The Krone brand is already well McCormick, Dieci, NC Trailers and established in the north west,” says Bomford Turner,” he says. “The Krone managing director Raymond Metcalf. brand is well established in our area, “This opportunity represents a new but there is a great opportunity to chapter for our family business, build market share with both new and to improve our service we have and our existing customers.” FG appointed well-respected local

June 2020 www.farmersguide.co.uk 61

60-63 News.indd 61

19/05/2020 09:05


72048

EXCLUSIVE UK IMPORTER

THE ZOCON GREENSEEDER C ATC H C R O P S Y S T E M

PELLCROFT

www.pellcroft.com sales@pellcroft.com 01526 342466

GOOD FOR THE SOIL.

INCREASE SLURRY / DIGESTATE APPLICATION DAYS. thegreenseeder@btinternet.com A PA R T N E R S H I P O F

Kevin Mowbray: 07810 011918 & Paul Roe: 07831 335697

71995

Manufacturers of centrifugal, low volume and portable fans, air tunnels, drive over floors, grain stirrers and gas burners

62 www.farmersguide.co.uk June 2020

60-63 News.indd 62

15/05/2020 14:59


News

Precision farming company expands portfolio SoilEssentials has been announced as the Scottish dealer for Garford Farm Machinery – a move that supports its desire to provide customers with leading precision farming solutions. Angus-based pioneer of precision farming solutions, SoilEssentials has announced it is the newlyappointed dealer for Garford Farm Machinery Ltd in Scotland. Customers can now take full advantage of Garford farm products, recognised as world-leading, with their range of precision-guided hoes, inter-row weeders and row crop equipment, including new machinery and spares. Developed and manufactured to make farming more efficient, the Garford range of products fit neatly into the existing SoilEssentials product and service portfolio – further enhancing and supporting the company’s desire to be synonymous with innovation in agritech and provide customers with leading-edge precision farming solutions. Garford Farm Machinery Ltd is a development, manufacturing and distribution company supplying

high-quality products to the UK and world agricultural market. The Robocrop range of products uses video cameras and image analysis computers to locate crop position and then guide the hoes quickly and accurately. This appointment adds to SoilEssentials’ existing portfolio, as it is currently the authorised dealer for Trimble Agriculture products and services for Scotland and the

north of England. Rod Armour of SoilEssentials commented on the new appointment: “Garford prides itself on listening to the farmers and identifying their needs, so we’re really pleased to be appointed as its Scottish dealers. Garford was an obvious choice to represent as a brand, being the market leader in inter-row weeding technology, and one we’re extremely pleased to have in our portfolio. SoilEssentials has always been at the forefront of agritech solutions and Garford will slot in and complement our other solutions available to growers.” Harry Coppin of Garford said: “Garford Farm Machinery is very pleased to announce SoilEssentials as being allocated the Scotland territory for supporting the Garford product. This being with parts, service and sales of machines, Garford prides itself on customer support and providing advanced technology for progressive farmers worldwide. With the everincreasing demand for the need to mechanically weed or targetapplicate, Garford Farm Machinery

has been allocating dealers across the country, to aid in product support in the field.” He continued: “SoilEssentials has a great team, motivated and enthusiastic to support the product within the Scotland markets; we feel this has been a good decision. Garford Farm Machinery direct support is still available with training being given to dealers to support them as best as possible.” FG

June 2020 www.farmersguide.co.uk 63

60-63 News.indd 63

20/05/2020 09:19


malting, while the spring wheat goes for feed and the oilseed rape HEAR crop is sold to Croda for use in plastics as a slipping agent. Mr Ling focuses on producing a stale seed bed and achieving a quality establishment using a low disturbance sub-soiler (RLM) followed by a 5m Vaderstad Carrier in a one-pass system prior to drilling.

his new drill had covered about 200ha that issues with the discs and coulters became apparent. Disc stall was causing an irregular seed placement issue, so he decided to move the coulters up on the discs. This then raised a few other issues. He says that the coulters were not consistent and had clearly not been welded correctly.

Until something breaks or needs replacing, it is almost impossible to tell genuine from non-genuine spare parts.

Non-genuine parts blamed for poor initial drill performance More drilling output was needed on a Suffolk arable farm, to optimise establishment and keep the weed burden to a minimum by targeting well-timed pre-emergence herbicides. But more output meant a bigger drill – and that potentially meant higher capital outlay. Richard Ling (pictured) of Rookery Farm, Wortham near Diss, decided it was time to trade in his existing 4m Vaderstad Rapid for a high-quality, low-hectare, second-hand 6m Rapid. Selecting the right drill is key to getting crops off to a good start and, for that to happen, Mr Ling needs a drill up to the job. For him the Rapid is ideal, due to its precision and consistency of seed placement. Soil types on the farm are variable and abrasive, which is an issue for him, but the hydraulic control on the Rapid drill allows him to adjust the cultivation systems on the move. The RDA 600 is Mr Ling’s fourth Vaderstad drill. It has the standard configuration of two rows of System Disc Aggressive followed by levelling board and two rows of coulter discs, then the packer and finally the following harrow.

“We can lift up and down the front discs and levelling boards,” he says. “This means on the heavier soils we can lower the discs deeper into the soil. Travelling at a forward speed of 12–13kph, helps to move the soil more effectively.” On a good day, Mr Ling says he can drill about 50ha – but he has achieved in excess of 80ha/day when under pressure. The farming and contracting business extends to 400ha. Winter wheat and barley, spring barley and oilseed rape make up the rotation currently across sandy loam to sandy clay loam soils. These abrasive soils are tough on wearing machinery parts. First wheat is grown for seed and can produce respectable yields of 10.2t/ha and a premium of £18/t over feed. The spring barley is sold for

The Carrier has two rows of 470mm ‘TrueCut’ discs with some of the discs removed so that it is compatible with the RLM. He says about 5 per cent of the arable land is under the plough. Most of the straw is removed and cattle/chicken muck is applied in the autumn. After cultivating the land, his aim is to leave autumn fields for at least 6–8 weeks to encourage weeds to grow. Any spring fields are established with a catch crop to help protect the soils. After both approaches, Mr Ling aims to spray glyphosate. “To keep on top of weeds, we are aiming to push our rotation out to six years by including spring oats and winter beans,” he says. “The key to establishment is the timing and, with the 6m Vaderstad Rapid, it gives us much greater flexibility. When we ran a 4m Rapid we often had to drill when conditions were marginal and in order to beat the autumn weather, it meant starting earlier. Neither situation was ideal so getting the bigger drill has made all the difference.” Pre-emergence herbicides go on six hours after the drill has been in the field. They are key to establishment because they are the only chemicals that really keep the grassweeds under control. Mr Ling explains it was not until

The discs were still stalling, at which point he realised that they were warped too, and it was discovered that the main cultivation components were non-genuine parts – all rectifiable problems, but still an inconvenience at the time. “Until something breaks or needs replacing, it is almost impossible to tell genuine from non-genuine spare parts,” says Mr Ling. “In the process of changing the discs, we discovered that some of them wobbled and assumed that the bearings had failed – again, something which is unusual for a Rapid. “Trash was bulldozing and this just caused more disc stall, which was very uncharacteristic for Vaderstad but it makes you wonder how many other farmers out there have been having similar problems caused by non-genuine spare parts and not realised it.” It turns out that the non-genuine discs do not nip the outside edge of the bearing to hold it firm in the hub. The result of this is that the bearing then wobbles in the housing requiring the replacement of both parts – hub and bearing. Mr Ling says it was a costly and time-consuming job to sort the drill out, but on the positive side, he now has a drill with genuine parts which performs perfectly in the field. FG

Richard Ling says there is a definite difference between genuine and non-genuine spare parts.

64 www.farmersguide.co.uk June 2020

64-66 Vaderstad and Cheffins.indd 64

20/05/2020 09:22


ADR UK | TYREMART Agricultural Running Gear Specialists Professional and knowledgeable staff committed to excellent customer service. Vast stock of all types of running gear to suit many applications. 3URYHQ DQG WHVWHG high quality products. &RPSUHKHQVLYH VWRFN RI JHQXLQH $'5 spares with next day delivery on most items. 7HFKQLFDO VXSSRUW IURP the world leader LQ WKH manufacture of agricultural running gear.

www.tyremartagri.co.uk

© ADR UK | TYREMART - ADR GROUP | 2015

$[OHV 6WXE D[OHV 6WHHULQJ D[OHV 7DQGHP DQd WULGHP %RJLHV +\GUDXOLF SQHXPDWLF VXVSHQVLRQV :KHHOV DQG W\UHV 6SDUH SDUWV DQG DFFHVVRULHV

ADR UK - TYREMART AGRICULTURAL LTD

Main Road, Long Bennington, Newark, Notts, NG235DJ GREAT BRITAIN Tel. +44 1400 283820 - Fax +44 1400 283137 email : info@tyremartagri.co.uk | www.tyremartagri.co.uk

FOR HIRE MT 765C•95E•85E•75E•55•45&35 all models in stock and available

Available with... GPS Guidance Creep Speed Transmissions Front Linkages Hydraulic Pick Up Hitches

THE LARGEST FLEET OF CHALLENGER TRACKED TRACTORS IN EUROPE all covered by our 24/7 backup service

Hire by the hour, week, month or year – it's your choice

Ian Houlgrave

71330

Tel: 01507 466352 Mobile: 0780 134 3023 Fax: 01507 462812 Email: ian@ianhoulgrave.com June 2020 www.farmersguide.co.uk 65

64-66 Vaderstad and Cheffins.indd 65

14/05/2020 12:55


Machinery

Online, on-site farm sale is a first A mid-June machinery dispersal sale will take bids online only, to ensure full compliance with Covid-19 social distancing requirements. The sale at Lodge Farm, Great Raveley, Cambs, is on behalf of W & JC Edwards and results from a change in farming policy. Cheffins is organising the timed online auction, for which bids can be placed from the 8th to the 15th June. It’s the company’s first on-site online farm auction for which bids can only be placed online, although potential buyers can attend viewing days on 9th and 10th June by timed appointment only to regulate numbers on site. “We have a reliable and wellestablished online bidding system which we know is popular with users,” explained Cheffins auctioneer Oliver

Godfrey. “This sale catalogue contains a superb selection of well-maintained, modern machinery, much of which has always been stored indoors and with very low hours. The tractors will appeal to farmers and contractors, but we also expect a lot of interest from trade buyers in the UK and overseas. Smaller lots expected to attract competitive bidding include workshop tools, spare parts, wheels and tyres, and many older collectors' items including some superb genuine 1945 War Department jerry cans.” The catalogue can be viewed at www.cheffins.co.uk. FG

} e l a s m {far

This dispersal sale is ideally timed for selling a quality modern combine and this 2009 New Holland CX8080 comes with a 24ft header and trailer, straw chopper, Smartsteer, two side knives, and an oilseed rape header kit. Tyres are Michelin MegaXBib 900/60R32 fronts – with 80 per cent tread and a few stone scuffs, and Trelleborg TM800 540/65R30 rears – with approximately 90 per cent tread. It was supplied by local main dealer G&J Peck to the farm new, and has always been serviced by the dealer. Overall condition is superb, having only recorded 1,626 engine, and 1,432 drum hours.

In excellent condition, this 2014 Dowdeswell 170-series MA 10-furrow on-land reversible plough has worked only 350ha from new.

This superb 2013 Case IH Quadtrac 450 is likely to attract competitive bidding. With rear linkage and PTO, it’s RTK-ready with a Case 372 receiver. Good Year tracks are fitted, with approximately 70 per cent tread remaining and only light stone damage. The crawler has worked only 2,247hrs and carries local main dealer Pecks Agritrac stickers.

What will the items fetch? Farmers Guide will feature several lots during the sale days on its social media accounts, allowing those who wish to take part to guess the final buying prices, then check to see how close they were as winning bids are announced. Take part on the Farmers Guide Twitter or Facebook accounts or follow the links from www.farmersguide.co.uk.

Registered on a ’10-plate’ and carrying its original Anker of Coates dealer stickers, this John Deere 7930 with AutoPowr 40kph transmission is in exceptional condition. It’s on Michelin MachXBib 650/85R38 rear tyres with 80 per cent remaining tread and 600/70R30 fronts with 70 per cent tread. The tractor has front suspension, an Active Seat and is GreenStar-ready. It’s been on the farm from new and has worked 1,900 hours, but its appearance is as good as many dealers’ demonstrators.

This 1977 JCB 413 4wd loading shovel is one of the more unusual lots. It’s on sound 17.5–25 wheels and tyres, is registered with a ‘W’-suffix and has clocked up only 3,575hrs since it arrived on the farm new.

Auctioneer Oliver Godfrey expects competitive bidding for the attractive lots on offer.

* MAXIMIZE YOUR PRODUCTIVITY

Contact: martin.holden@sip.si @SIPSlovenia www.sip.si

Robust grass harvesting

2020-02-17-SIP_Farmers_guide 03-2020_190_65_en.indd 1

66 www.farmersguide.co.uk June 2020

64-66 Vaderstad and Cheffins.indd 66

* More at www.sip.si

2/17/2020 4:22:40 PM

18/05/2020 11:38


Farmers Guide

Cereals Showcase Explore our world...

360

CEREALS 360 Experience a virtual crop tour across all of our key varieties of barley, hybrid rye, oilseed rape and wheat! Cereals 360 is accessible, wherever, whenever, from the comfort of your own home across computers, or out in the field on tablets and mobile.

www.cereals360.com June 2020 www.farmersguide.co.uk 67

67 Cereals.indd 67

15/05/2020 12:07


67-69 Cereals.indd 68

18/05/2020 09:44


Cereals Showcase

Event promises to deliver key features virtually Elizabeth Warham, agri-tech lead at the Department for International Trade (DIT). “In the UK, academia and research centres work closely with agri-tech companies using scientific breakthroughs in nutrition, genetics, remote sensing, engineering, robotics and meteorology to develop and commercialise innovative technologies, with the potential to transform traditional agricultural practices.” Seminar sessions will demonstrate how these cutting-edge developments are revolutionising modern farming.

The Cereals Event is taking place solely online for the first time ever to support the industry during the Covid-19 pandemic, with free registration for the two-day event on 10–11th June 2020. Producers may not be able to physically visit the Cereals Event this year, but they won’t miss out on any of the content as all the key features will be delivered in a virtual sense, says event director Alli McEntyre (right). “These are challenging times, and it’s really important to us that we deliver all of the content we had lined up for visitors so they can keep up-to-date with the latest information, products and innovations in the arable sector. Farmers are rightly being celebrated for the key role they play, and we are committed to supporting the industry by bringing everyone together.” The seminar sessions will be run as video-based webinars, enabling attendees to collect BASIS and NRoSO points. Up to six BASIS points are up for grabs, and they will be running a Knowledge Trail. “Farmers will be able to hear from top speakers covering a range of subjects, from the impact of coronavirus on trade, to new plant breeding technologies, adapting to

climate change, digital innovation and agricultural career options,” says Ms McEntyre. Accessing the event via an interactive map on the Cereals website, producers can ‘visit’ exhibitors and watch machinery demonstrations, with live chats making for a fully interactive experience. There is a full range of exhibitor-led content on offer, including video from crop plots, sprays and sprayers and working demonstrations, as well as exhibitors’ own video content and new product launches.

New technologies Innovation is key to agricultural efficiencies and productivity, and the DIT Innovation & Technology Theatre will be focusing on how the latest developments and advice can help producers to create more from less – boosting productivity with the most cutting-edge equipment and advice. Agri-tech can help farmers produce more in a sustainable way, with less impact on the environment, explains

Fresh ideas for efficiency As farmers strive to become more efficient and sustainable, getting the most from natural resources, crop varieties and inputs is gaining traction – something Cereals LIVE is exploring in depth. “Agriculture must continually adapt as it faces new and evolving challenges, whether that’s reduced access to effective chemistry, changing public pressures or new government policy,” says Ms McEntyre. “However, these challenges all pose opportunities for farmers to embrace new ways of thinking about what they do and how they operate. The AHDB Theatre at Cereals LIVE aims to present growers with fresh ideas and innovative ways to tackle obstacles head on.” Further sessions will look at how farmers can adjust to the new opportunities presented by the Government’s Agriculture Bill and ELMs, and what impact coronavirus will have now and in the future for UK farmers, food security and global trade.

Spray tech advancements Farmers will be able to see a wide range of spraying innovations in action at Cereals LIVE. From reducing inputs to maximising efficacy and improving gross margins, the reasons

for optimising spraying are many – so whether operators are looking for trailed, self-propelled or even robotic sprayers, the online event has it covered. “Though farmers won’t be able to stand on the side of a ring and physically watch the demos this year, they can still access the Syngenta Sprays & Sprayers Arena at the online event, with exhibitors presenting their technology through working demonstration videos,” explains Ms McEntyre. Despite the Covid-19 outbreak, the prestigious FSOOTY award will go ahead as planned, with the six finalists judged remotely using video conferencing technology. The winner will be announced at 12.30pm on Wednesday 10th June 2020.

Future farmers From developing skills for the future to adapting to climate change, there is always something new to learn – and Cereals LIVE is delivering a full range of seminars with expert advice for forward-thinking farmers. “Farming is as much about looking to the future as it is optimising the now; meaning that improving soil health and opening doors for the next generation should be part of every arable business,” says Ms McEntyre. “The Young Farmers & Sustainability Theatre at Cereals LIVE aims to provide farmers with the key information required to improve the sustainability of both their farm and their business.” George Baxter, agri-chairman at the National Federation of Young Farmers’ Clubs, adds: “NFYFC is delighted to be involved with Cereals LIVE this year, where young farmers can take part in online seminars and activities, from technical to business skills, networking, innovation and career opportunities.” FG

Keeping your business rolling Join us online at AGRI SERVICES

To find out more call 01670 789 020 or visit www.woxagriservices.co.uk

woxagriservices

woxagri

woxagri

June 2020 www.farmersguide.co.uk 69

67-69 Cereals.indd 69

15/05/2020 12:10


Cereals Showcase

New trailers added to substantial line-up Larrington Trailers has extended its range for the 2020 season, with two more trailers being added to its already impressive line-up. It is introducing a new longer, lower-sided root crop trailer in the ‘harvester’ range, and a combination flat bed/cattle box trailer. The company’s new ‘harvester root’ trailer is 26ft (7.9m) long with only 4ft (1.2m) sides and the distinctive high arch/full width ‘eye’shaped front grill giving the driver unmatched visibility into the trailer. According to Larrington, this makes it perfect for root crops such as carrots and potatoes. The trailer also features a sprung drawbar, hydraulic taildoor and a single tipping ram as standard. Larrington’s harvester range has become increasingly popular

with farmers in the UK and overseas since its introduction. Its modern half-pipe design and lighter weight construction make it stand out for all the right reasons, the company says. The smooth inside body has no cross welds to skin potatoes and helps further reduce the tipping height needed when emptying in low buildings. The company has also worked in partnership with AW Trailers of Herefordshire to supply one of its customers with a top-of-the-

range combination flat deck/cattle transporter. With each company focusing on its area of expertise, this trailer consists of a heavy-duty flat deck trailer with front and rear bale racks, air and ABS brakes, a sprung drawbar and, importantly, underslung suspension – keeping the deck low for stability while carrying bales and reducing the angle of the loading ramp when using the cattle box. An aluminium framework/clad cattle box with fully welded tread plate floor for easy cleaning, is clamped and bolted down to the flat deck when required to transport livestock. With two slam latch internal division gates, internal LED lighting, and a sprung assisted steel loading ramp and inspection door

as standard, this trailer can be made to any length required (subject to public highway laws) and, with optional sheep decks, vents, underfloor tank and hydraulic deck ramps available, it is ideal for anyone looking for a strong and versatile cattle, pig and sheep transporter. Commenting on the impact of Covid-19 on the business, Richard Larrington said: “The circumstances required some operational changes, but we have not seen any slump in demand. Our farmers are still working just as hard to keep the food supply chain going, and we are here to support them every step of the way. We have actually taken on more staff and are still taking orders for this season.” FG

Sole UK importer

Ziegler’s Disc Master and Field Profi cultivators offer quick, effective cultivations. Robustly built; easy to use; simple to maintain – use top quality German engineering on your farm. Profi ‘Practical Test’

report available

Ziegler four-wheel-steer header trailers take tight corners with ease, making harvest quicker, safer and simpler.

Arrange a demonstration Phone 01799 543208 Abrey Agricultural Ltd, Pond House, Pamphillions Farm, Debden, Saffron Walden, Essex CB11 3JT 72228

70 www.farmersguide.co.uk June 2020

70-71 Cereals.indd 70

15/05/2020 12:12


Fentons of Bourne Ltd

MyKUHN

Kate’s Bridge, Thurlby, Bourne, Lincs PE10 0EN

‘Click and collect’ service

Homburg Dynamic Drive 1.0

71584

Better control with HDD while flushing your drains

Tel 01778 560466 or 01778 560425 Mob 07767 816555 www.fentonsofbourne.co.uk

GRASS-MANAGER Grassland Weeder

SALES SERVICE HIRE

REPLACEMENT PARTS WHEN YOU NEED THEM MOST

PNEUMATICSTAR Grassland seeder

KUHN Parts Easy access via mykuhn.kuhn.com PNEUMATICSTAR-STI Grassland Seeder

PNEUMATICSTAR-PRO Grassland Seeder

• Order parts on-line from your KUHN dealer • Access our interactive parts catalogue • Check out your operator’s manual

HARROWS & SEEDERS ON STOCK. CONTACT US FOR YOUR LOCAL DEALER www.kuhn.com

MyKuhn-Grass-FarmGuide-270x93-05-20.indd 1

70-71 Cereals.indd 71

June 2020 www.farmersguide.co.uk 71

06/05/2020 09:27

15/05/2020 12:16


Cereals Showcase

Unlocking the cereal industry’s potential in lockdown

With straw shortages forecast, it has never been more important to operate efficiently over harvest. P J Reed explains how its innovative system can tackle wet-wasted straw. At the point in March when pasta, flour and toilet rolls were being stripped from supermarket shelves, farmers were being warned not to panic-buy straw. It wasn’t so much the worry that straw bales would become rarer than a family-sized pack of Andrex, but more the

concern of rising straw prices in anticipation of a smaller harvest this year. So, whilst shortages of straw are forecast, operating more efficiently over harvest could well help maximise what stocks are available over the next 12 months, to both

agriculture and the renewables industry alike. Maintaining the quality and the quantity of straw from this year’s harvest is perhaps never likely to be more crucial. Stored uncovered in the open, it will be left vulnerable to the unpredictable British weather. It’s estimated that between 10–15 per cent of straw produced in the UK annually is wasted by rainwater damage. It was that very issue of wetwasted straw which led Suffolk farmers Paddy and Will Reed to design a unique mechanised sheetcover application system for straw stacks five years ago. They launched their new innovation, ProStraw Systems, to great acclaim at the Cereals Event in 2016. With the constant advances in technology and machinery, industry events like Cereals provide important opportunities for not only getting hands-on with the latest bits of kit, but also meeting up with colleagues, friends and industry peers. This year has had to take a different direction though. Whilst many agricultural shows and

events have been cancelled, Cereals has taken its annual two-day show online instead, and that’s important. Cereals LIVE 2020 Virtual Event will still allow the cereals industry to connect and debate through webinars, and for businesses to showcase their innovations to potential customers. For a sector under numerous pressures, this is most welcome. Whilst it’s always a great opportunity to see industryspecific tech and machinery all in one place, the opportunity to network and learn more about the current key issues provides a fantastic opportunity whilst we’re still unable to meet face-to-face. ProStraw Systems will be exhibiting at the Cereals Virtual Event via it's own microsite. Here, you will be able to view exclusive content and videos, whilst discovering more about the Parkland Bale Accumulator range and ProStraw Systems stack sheet covers. Video conferencing will allow you to communicate directly with ProStraw and receive advice on how you can make the most of your straw stocks this harvest. FG

STRAW WANTED Suffolk-based Straw Merchant PJ Reed is actively seeking farmers to supply straw in the swath this harvest. Wheat, barley, oat and rape straw can be cleared from your fields using the latest baling equipment coupled with a Parkland Bale Accumulator for a complete controlled traffic environment. For those with smaller-headed combines we can also deploy our Claas Liner 40 foot rake to bring three rows of straw into one meaning it speeds up the baling and clearing process whilst reducing traffic even further on your fields.

We offer a prompt service and payment, so call Paddy Reed now on 07768 353910

PJ Reed

Straw Procurement 72463

Contact us today Paddy 07768 353910 or Will 07828 730712

Office 01284 810751 • Email admin@prostrawsystems.co.uk • Grove Farm, Barrow, Bury St Edmunds, Suffolk IP29 5BE SEE OUR WEBSITE FOR MORE INFORMATION ON OUR UNBELIEVABLE DEALS www.prostrawsystems.co.uk

72-73 Cereals.indd 72

15/05/2020 12:20


t

GET HARVEST DONE The Parkland Agro-Master range of three and five bale Accumulators are perfectly tailored to get your harvest done They all offer the solution of controlled-traffic, reducing compaction, and halving the time it takes to collect your bales New and used Parkland Bale Accumulators are available to buy now

UK

l•S e u F Save • e m i Save T

e Money v a S • r abou ave L

Visit us at the Cereals LIVE Virtual Event on Wednesday 10th and Thursday 11th June. Find our ProStraw Systems micro-site to see exclusive video content and the chance to talk with us directly and have your questions answered.

www .cerea lseven t.co.uk Straw is going to be in short supply this year, so it’s going

HAS IT COVERED W to O N r e Ord

to be crucial to get your assets covered ProStraw Systems stack cover sheets can help eliminate the waste of water damaged straw, protecting your valuable stocks and ensuring your investment is repaid in the first 12 months

tment later n i o p p disa avoid

Ensure your straw and hay is in a safe condition to store, and avoid expensive rejections of your valuable stock with the Martin Lishman Balemaster Protimeter moisture probe and electronic handset Available to purchase now 72415

Contact us today Paddy 07768 353910 or Will 07828 730712 Office 01284 810751 • Email admin@prostrawsystems.co.uk • Grove Farm, Barrow, Bury St Edmunds, Suffolk IP29 5BE June 2020 www.farmersguide.co.uk 73 SEE OUR WEBSITE FOR MORE INFORMATION ON OUR UNBELIEVABLE DEALS www.prostrawsystems.co.uk

72-73 Cereals.indd 73

15/05/2020 12:20


The UK’s most established supplier of precision farming products, offering best option advice, installation and ongoing support.

Your Partner In Precision Agriculture 01480 861824 | www.vantage-ag.uk

Vantage England & Wales | 4 Grovemere Court, Bicton Industrial Estate, Kimbolton, Cambs, PE28 0EY

www.aminoa.co.uk Farmers Guide 210(H) 74-77 Cereals.indd 74x148(W)mm – Proof 1_Artwork.indd 1

04/05/2020 12:22 16:29 15/05/2020


Cereals Showcase

Independent trial results confirm efficacy improvements Direct drilled Fido Triticale treated with AminoA, completely smothering black-grass

Impressive yield returns and efficacy improvements on crops treated with biological crop stimulants from AminoA have been demonstrated in independent trials. The first quarter of 2020 has brought many challenges, from waterlogging to near drought, followed by cold dry winds and then returning rain. “Through extremes and changeable conditions, many crops

will show serious effects of stress,” explains AminoA managing director, Richard Phillips (pictured left). “During prolonged periods with no rainfall, for example, crops are unable to take up badly needed nitrogen which is

2018 and March 2019 respectively, saw yield increase responses of 0.50t/ ha and 0.74t/ha. During the drought year of 2018, independent Eurofins trials in North Yorkshire showed winter wheat treated at T1 and T2 returning a yield increase of more than 1.2t/ha. AminoA FLO is now used worldwide, and has been beneficially applied to all crops – everything from pineapples and bananas to grassland. FG

still lying on the ground. “However, applying AminoA FLO with dissolved urea (6–8kg/ha) will give the crop a nutrition boost and help it recover until rainfall arrives.” The effectiveness of AminoA biological crop stimulants on yields and efficacy has been demonstrated through independent trials, conducted over the contrasting conditions of 2018 and 2019. NIAB trials in 2019 saw 0.73t/ha grain yield increases of winter wheat, returning 10.18t/ha over the control 9.45t/ha. Two applications were made at T0 and T1, with 1.5-litres/ha, in a low fungicide situation. This complements similar trials from Eurofins. Two separate Seventh continuous winter wheat on chalk applications on two land, treated with AminoA FLO. winter wheat plots, applied in November

2

Unique Induction Bowl

The new conical, 60 litre induction bowl with anti-splash lip and a 200 l/min drawout speed, takes 25 kg bags of powder straight in dry and in seconds.

Amazone sprayers More than just the best boom ride

The operator has full control over the pressure in the rinse ring and the can wash as well as having the handy neck wash nozzle for better cleaning of the chemical cans. Hand wash and soap dispenser are handily placed as is the clothing storage for gauntlets and mask, etc. Don’t get left behind; spraying technology is changing and Amazone is leading the way in intelligent crop protection. Contact your local dealer or phone us on 01302 755 725.

www.amazone.co.uk 16:29

74-77 Cereals.indd 75

15/05/2020 12:24


Cereals Showcase

The new Leader 4-Series 36 from Team Sprayers.

Optimising seed-to-soil contact Guttler Master and Magnum Trailed rollers range from 6.4–12.4m wide, with the USP of full pendular movement on all of the gangs. This allows superb weight transfer and consolidation for optimum seed-to-soil contact, along with the USP of the Prisma Ring profile, says importer Wox Agri. This achieves optimum seed-to-soil contact, whilst also offering the ability to achieve optimum milling and grinding of any unwanted lumps. At the same time, users avoid smearing the soil during the rolling process, or when doing headland turns. Options to fit tined units with three rows of tines at spacings of

7.5–17.5 cm allows the machine to be used as a formidable tool for stubble chitting, straw spreading and incorporation, along with rolling for black-grass and volunteer cereal chitting. Levelling paddles can also be fitted, allowing soil working in both ploughed and non-inversion situations to be realised. A range of seeders can be fitted, allowing grass seeds, stubble turnips and cover crops to be applied. Weights start at 3,500kg for the smallest Master 6.4m wide model, through to 8,250kg for the Magnum rollers with tined units on. FG

Wider boom width for best-selling sprayer Team Sprayers has started production of its Leader 4-Series 36, offering a wider boom width on its best-selling Leader 4 trailed sprayer. The new 36m model will still incorporate a low-folding boom design which, along with the profiled tank, gives the sprayer a low centre of gravity and maximises machine stability both in the field and on the road. All Series 36 machines are supplied with the Mueller Track Guide 3 control system, giving GPS field mapping, GPS boom section control, automatic boom height and contour levelling, and precise axle steering. A valve control interface gives operators complete control of all spray and cleaning functions without leaving the cab – with an additional

machine-mounted panel to control all mixing and tank fill functions from the machine workstation. Other important features include a maximum tank capacity of up to 5,000 litres and an electro-hydraulic control system enabling boom folding combinations, while self-levelling tilt and anti-yaw mechanisms give maximum boom stability and application accuracy. Farmer John Carroll said: “I’ve run Leader 3 sprayers for a number of years and always been very happy with the performance. It’s an excellent sprayer but I wanted a bigger tank and boom, so I have ordered a Leader 4-Series 36. I’ve been very impressed with what I have seen so far of the Team Leader range.” FG

NEW

TEAM LEADER 4 - SERIES 36 NOW WITH 36M BOOM

team-sprayers.com • 01353 661211

76 www.farmersguide.co.uk June 2020

74-77 Cereals.indd 76

20/05/2020 09:23


HARVEST HARVEST INSTALLATIONS INSTALLATIONS DRYING SPECIALISTS

CROP

HaRvESt COnStant HUmIdIty COntROllER

We manufacture, supply & build...

Gives you guaranteed drying conditions, 24/7. Efficient and economic with thousands of units in use on all combinable crops and onion stores nationwide.

• Cubicle Buildings • Lambing Sheds • Dairy Units • Workshops • Grain Stores • Industrial Units • Bespoke Design

• Internal Stables • Stable Blocks • Indoor Arenas • Hay & Straw Stores

01606 738 738 | sales@flgb.co.uk | www.flgb.co.uk

CALL: 01795 533903

Main Office: Unit 2/3 Oaklands Park, Rougham Hill, Bury St Edmunds, Suffolk, IP33 2RW. info@harvestinstallations.co.uk

www.harvestinstallations.co.uk

Martin Lishman With you through every step!

1 Drilling

2 Spraying

Demount Trailed ATV Mounted Tractor Mounted

Bourgault Tillage Tools

Barn Owl Wireless

5 Control

4 Cooling

Automatic control and monitoring

Pile-Dry Pedestals Pile-Dry Fans FloorVent Pedestals StoreVent Extraction Fans

6 Storage Crop Quality Equipment

www.martinlishman.com

7 Hot-Spots Trouble-Dry Hot Spot Spears Urgent spot drying

3 Harvest

Protimeter Moisture Meters

Visit us

at

VE I L s l a e Cer 0 202

Stand:

929

01778 426600 /martinlishmanltd @Martin_Lishman June 2020 www.farmersguide.co.uk 77

74-77 Cereals.indd 77

15/05/2020 12:26


Crop drying, ventilation and storage systems specialists. Flach & Le-Roy Ltd is an industry leader in designing and delivering high performance drying, ventilation & storage systems.

We have been supplying top quality drive-on and box store drying and storage installations to the arable farming industry globally for over 27 years and our business is continuing to grow. Drive-on Floor Systems • Letter Box Duct Systems • Control Systems Centrifugal & Axial-Flow Fans • Gas Burners • Walling Systems

35 years experience in the industry

78-81 Cereals.indd 78

10 year Guarantee Manufactured in England

“Drive on Drive off ” systems

Flach & Le-Roy Ltd

Telephone: 01480 495956 Mobile: 07774 141512 Email: enquiries@flruk.com Website: www.flr-cropdrying.com

13/05/2020 11:12


Cereals Showcase

Cultivator shines in season-long trial

German machinery manufacturer Ziegler’s Disc Master Pro should feature on any farmer’s list of potential new cultivators, according to a leading practical test organisation, which has published a full review of a season-long trial. Ziegler’s sole UK importer, Abrey Agricultural, says the review of the 4.5m Disc Master Pro praised its performance across a full working season and in all conditions. It highlighted how the 87cm underbeam clearance and 90cm gap between disc gangs helped to Spald-FmGuid-0219-210x148-Ultra achieve efficient soil/trash flow and good working speeds. Copies of the

full report are available from Abrey. While the test was completed on a 4.5m model, the full range includes models from 3–7m, all fitted with 56cm diameter, 5mm thick cultivating discs mounted on maintenancefree, permanently lubricated SKF bearings, which maintain consistent 9/1/20 15:46 Page 1 cultivation depth and excellent contour following, Abrey says. Rubber

damping enables discs to trip clear of obstructions and automatically reset to the desired working depth. Six designs of rear roller are available, enabling the machine to work across all soil types, with an optional harrow and seeding kit also being available. Ziegler also offers the Field Profi cultivator – available in 3m and 4m widths – which can work from 8–38cm deep (3–12in). It typically requires 125–160hp tractor power. Cultivating tines are set on bars 80cm apart and at 34cm lateral spacings, with under-frame clearance of 86cm ensuring excellent trash flow and enabling the machine to handle high trash volumes and growing vegetation. Tines are protected by a shear bolt, with an auto-reset spring as an option, with a range of different points and wings being available. Changing between them is quick and simple. Six different rear rollers are available, and a rear harrow and seeding kit are offered. Hundreds of British farmers are now using Ziegler’s header trailers to move combine headers between fields, says Abrey.

Toby Abrey believes the trailers offer important practical and agronomic benefits: “Users report that the trailers are very stable and easily handle both dual carriageways and smaller rural roads. “Removing the need for a second staff member to help move the combine could release staff and machines for other tasks, which could be crucial during a busy harvest. “The trailers’ manoeuvrability might enable some farmers to invest in bigger combines or wider headers than they could otherwise. That could increase harvesting capacity and speed, and reduce both labour costs and the risk of weather disruption.” FG

Innovation in the field – ask your local SPALDINGS representative for the full SPLULTRA story

LEADING

PARTS SPECIALIST

HIGH PERFORMANCE NEW WEARING PARTS RANGE Unique parts re-designed for longer working life

BY D E V E LO P E D S G IN D L A

SP

With SPLULTRA parts you can take advantage of enhanced performance in the field; meaning cultivation operations can be carried out more cost effectively with the benefit of efficient tillage and reduced downtime. PARTS THAT MAKE A DIFFERENCE!

SPLULTRA Heavy duty cast point To fit SIMBA, GREAT PLAINS – Prolift, Flatliner 500, Solo, DTX

visit: www.spaldings.co.uk/SPLULTRA to access our full range online Call: 01522 507600 • Email: agsales@spaldings.co.uk facebook.com/spaldings.ltd | twitter.com/Spaldings Spaldings par ts are designed and manufactured for Spaldings to exacting quality standards and are supplied to fit machines indicated and are not sold as genuine par ts.

78-81 Cereals.indd 79

20/05/2020 09:23


Cereals Showcase Versatile opener system ‘a game changer’ Min-till or no-till crop establishment has sparked the interest of many who desire more sustainable farming practices with reduced input costs. Bourgault Tillage Tools’ Versatile Opener System (VOS) has been designed to meet these objectives, offering minimal soil disturbance and reduced wear rates, at a lower cost per hectare. Introduced to the market four years ago by Bourgault importer Martin Lishman Ltd, VOS users have reacted positively to the system, seeing more even crop establishment, increased moisture retention and time savings, the company says. After adopting VOS, Leigh Donger from Peacock Farm shares his views: “In 2018 we changed to VOS and

it was a real game changer! We thought that the knock-on points we were using previously created low disturbance, but the VOS single shoot is something else. I had to check that the field had been drilled, and even questioned the operator to make sure he had done the job!” Leigh made the move to VOS to gain better control of the fertiliser element: “The main reason we changed was because of how VOS distributes the fertiliser; alternative openers just spray the fertiliser on the soil after the coulter. I wanted the fertiliser to be under the seed or at least under the soil. VOS does just this, plus I can go straight from rape seed to beans without changing anything on the drill leg.” FG

Graham Heath Construction will be taking part in the two-day virtual Cereals event and offering some of their very best prices on steel frame buildings.

Offers on steel frame buildings at virtual event With the sad news that all summer trade shows have had to be cancelled due to the Covid-19 pandemic, Graham Heath Construction, one of the UK’s leading suppliers of steel framed buildings, says it was thrilled when it heard that the Cereals Event was to be taken online to create Cereals LIVE 2020. Graham Heath Construction is delighted to be taking part as an exhibitor in this virtual event which takes place for the very first time on 10–11th June 2020 (Stand 129). While the company unfortunately won’t be able to meet with farmers face to face, it is an innovative alternative

Leigh Donger’s 6m Horsch Sprinter fitted with VOS coulters leaves minimal impact while drilling.

to the traditional event and a fantastic way for Graham Heath Construction to still reach farmers over these two days. Farmers will be able to discuss their building requirements and take advantage of some fantastic offers that Graham Heath Construction currently has running. “Our British farmers are essential in keeping the nation going. They work tirelessly throughout the year and are currently facing very challenging times,” commented Graham Heath Group Ltd general manager, Paul Hanson. “We wanted to thank them and show our support and appreciation by offering some of our very best prices on steel frame buildings.” FG

CREATING THE PERFECT GRAIN STORAGE SOLUTION

JOIN US AT

www.cerealsevent.co.uk

it

ured B Ass

Qual

10th & 11th June 2020

Stand: 129

g ldin s ui

y

Thanking our essential farmers with 5% off orders*

*T&C’s apply..

ONE OF THE UK’s LEADING MANUFACTURERS OF STEEL FRAME BUILDINGS GRAIN STORE 1,500T 120’ x 60’ x 23’

From £55,500* Including concrete panels to 3.5m Optional extras:

100’ Partition £4,800 20’ x 20’ Fan House £6,000

GRAIN STORE 1,000T

WORKSHOP OFFER

From £36,000* Including panels

From

80’ x 60’ x 20’

60 x 30 x 12

100 x 40 x 15

From £18,000* Including panels

£11,995* *

LIVESTOCK OFFER

Ex Works

Made in Britain 15 years’ Experience Nationwide Delivery Bespoke Buildings 5* Customer Service

MENTION ‘FARMERS GUIDE’!

CALL US TODAY FOR YOUR BESPOKE QUOTE & SPECIAL OFFERS 01270 781158 or email: info@gh-construction.co.uk @GrahamHeathConstructionLtd

@GrahamHeath Construction

@GHConstruction

www.gh-construction.co.uk

80 www.farmersguide.co.uk June 2020

78-81 Cereals.indd 80

15/05/2020 12:43


First class seats for every journey 10% off RRPs – call for details

Residue Management, Soil Conservation, No-Till.

Is at the heart of Tillso

Advantage Sabre Tines

Targeted restructuring without soil inversion

Rake& Roll Riteway Harrow

Residue management Fast and cost-effective

Sabre Tines & parts are now marketed & distributed through Spaldings Ltd

All genuine parts are stamped

TEK Seating, the UK’s biggest independent vehicle seating distributor for the OEM and aftermarket, offers a wide range of competitively priced, quality agricultural seats and spares from leading suppliers such as KAB Seating, Grammer, United Seats, Isringhausen and Sears.

SCIOX Super

XH2/U4

T600

Sabre Tines

Rancher

Maximo Professional

70185

01892 515028 Tel: 01733 270 135

www.tillso.co.uk

sales@tekseating.co.uk |www.tekseating.co.uk

Branches: Tunbridge Wells, Kent and Rearsby, Leics

VOS

(Versatile Opener System)

Imported by: Martin Lishman

Low Disturbance

Maximum moisture retention, improved soil structure

Versatility

Holders and tips available to suit seed only or seed and fetilizer paired row

Visit us

202

Stand:

Carbide Placement

Durability with consistent application

www.martinlishman.com

at

LIVE s l a e r Ce 0

• Very low disturbance • Consistent sowing depth • Precise fertiliser placement • Self-sharpen during wear • Multiple options for seeds and pulses

929

01778 426600 @BourgaultVos sales@martinlishman.com June 2020 www.farmersguide.co.uk 81

78-81 Cereals.indd 81

13/05/2020 11:34


NEW for 2020

Leeb PT

We can’t meet you at Cereals but you can still see our latest innovations. www.horsch.com/en/news/virtual-stand We’re sorry we won’t meet you at the Cereals Event this year but that doesn’t stop you seeing the latest HORSCH machinery at our virtual stand. The Leeb 6.300 PT self-propelled sprayer would have had its UK première. Also on show, the updated Joker RT cultivator and 12m Avatar SD direct drill bring greater productivity to your farm. Our new Hybrid Farming System combines the best practices of organic farming and conventional farming, and includes the new Transformer VF hoeing tool and Cultro TC double knife roller. Visit our virtual stand to discover more about all our Cereals 2020 machines, speak to your local HORSCH dealer or call 01733 667895.

82-85 Cereals.indd 82

POWERED BY

19/05/2020 09:35


Cereals Showcase

New generation trailed compact disc harrow Horsch has announced the new generation of Joker RT trailed compact disc harrow, with a new design for increased flexibility. Available in 5m and 6m working widths, the Joker RT features the DiscSystem with 52cm discs as before, but their arrangement has been changed for improved operation. The discs are serrated for aggressive working and a good penetration of the soil, and their position has been optimised to improve working quality. The discs are arranged in pairs on the suspension, providing a large clearance for harvest residues and

are equipped with a maintenancefree, well-proven and solid bearing. The soil adaption and the stone protection of the Joker RT are carried out via the well-proven rubber bearing. Customers can choose additional tools in front of the discs, such as a knife roller or a crossbar. The Joker RT can also now be equipped with a wide range of single or double packers. The transport chassis is located behind the packer and allows for a safe road transport, Horsch says, while the design also guarantees smooth running of the machine in the field. FG

Innovative addition to direct drill coulter Following the success and popularity of its low disturbance 12mm tungsten carbide direct drill coulter, J.J. Metcalfe & Son has introduced an innovative new tip to fit the same system. The much-requested development comes in the form of a winged tip, which is interchangeable with its predecessor, providing cost effective versatility. Easily changed with a roll pin, the new tip enables the seed to be spread into a 100mm band. It has been specifically designed with a tungsten carbide point and wings to cut through the soil, leaving a level surface – which not only deters slugs, but helps with follow-on operations. The wings are purposefully shaped to encourage the soil to flow back in behind them. This pioneering design means that the soil closes the slot, trapping the seed and providing excellent seed-to soil-contact. The new 100mm band coulter is available now to retro-fit Horsch CO and Sprinter series drills, Seedhawk and Amazone Cayena drills with tube options suitable to use liquid or granular fertiliser. FG

COUSINS at

Cousins Crop Check™ Crimper Roller

HZ rolls

Top Disc™

Cousin's new crimper roller with helical blades to roll, break and bruise cover crops ahead of drilling. Rolled down in the direction of planting, cover crop forms a dense weed suppressing mat on the soil while allowing successful crop establishment. Suitable for front mounting or trailed, can also be retrofitted to rolls.

V Form Folding Patriot combination cultivator

Built in Britain for British farmers & contractors For more information please call the sales office on 01945 584600 or visit our website: www.cousinsofemneth.co.uk 71586

June 2020 www.farmersguide.co.uk 83

82-85 Cereals.indd 83

20/05/2020 09:24


Cereals Showcase ‘Intelligent’ sprayer offers new possibilities

Drainage at the forefront of future plans So far 2020 has presented UK growers with significant challenges, including the long, extremely wet winter and early spring which gave way to a record-breaking sunny April; changes to BPS; the fallout from Covid-19; and significant Brexit uncertainty. However, agriculture is a resilient and dynamic industry which has weathered many changes before. Land drainage contractor William Morfoot Ltd has seen a robust response from many farms. Director Justin Morfoot comments: “We have seen an ongoing and increasing appetite from many of our farming clients to invest in better land drainage systems on their farms as a direct response to managing the risks which are out of their direct control.” With the previous autumn and

winter seasons having created a hugely challenging time for arable operations, drained land has performed unquestionably better in the catchy weather windows which have been available – often making the difference between arable operations happening or not. Mr Morfoot continues: “Land drainage provides a long-term and well-documented benefit to arable land and this results in farms being able to ensure that even in the more difficult seasons, they are able to do the work they do in a timely way.” William Morfoot Ltd offers a comprehensive and precision-based scheme design and installation service for new land drainage schemes, as well as ditch restoration and water course management. FG

New intelligent features on the Hardi Navigator take the sprayer to the next level, offering more than just reliability and efficiency in the field, Hardi says. Navigator intelligent sprayers are equipped with the Hardi SmartCom electronic platform and offer the end user a full Isobus experience, meaning easy connection to tractors and controllers. The faster processor offers a more accurate and responsive liquid regulation system, while the operator gains a more precise application, with control of individual nozzles among the many possibilities. The Hardi AutoNozzleControl system controls the application per individual nozzle. With sections down to 0.5m, an exact application with minimum overlapping leads to chemical savings up to 10 per cent. Stepper motors of the PrimeFlow system are placed at each nozzle body. Combined with new AutoNozzleControl software, the highest precision level is reached, Hardi reckons.

Featuring ‘IntelliTrack’ and DynamicFluid4, the Navigator demonstrates a high level of control both with track-steering and chemical regulation. IntelliTrack is a high-end steering drawbar concept combining the advantages of an excellently designed chassis with the use of advanced electronics. Easy to connect and operate, IntelliTrack ensures the safest tracking in even the most difficult field conditions. Meanwhile, DynamicFluid4 calculates the consequences of the increased RPM and regulates instantly. The Hardi Navigator is offered with tank sizes of 3,000-, 4,000-, 5,000- and 6,000-litres, and boom widths from 18–39m. FG

innovative new tip > 100MM BAND SEEDING > LEAVES A LEVEL SURFACE > TUNGSTEN CARBIDE TIP AND WINGS > SIDE PROTECTION STRIP > INTERCHANGEABLE WITH 12MM TIP > LIQUID AND GRANULAR FERTILISER TUBE OPTIONS

JOIN US ON TWITTER @JJMANDSON

specialists in performance parts for agriculture 84 www.farmersguide.co.uk June 2020

82-85 Cereals.indd 84

15/05/2020 12:49


Get ready for harvest! We have all the stock you need for 2020. Order now.

01621 868 138

agricultural@gibbonsgroup.co.uk www.gibbonsgroup.co.uk

£2,821 H T R DE WO A R G P U FREE 020 on

une 2 l 9th J

nti Valid u

tor and

Naviga

odels

der m mman

Co

l with Save up to 10 % chemica

only

AutoNozzleControl

To minimize environmental impact by minimizing your spray fluid consumption by up to 10%, we have developed HARDI AutoNozzleControl for opening and closing individual nozzles.

Field

The Intelligent choice

AutoSectionControl

NAVIGATOR

AutoNozzleControl

3000 / 4000 / 5000 / 6000

Double sprayed area

Headland

Upgrade and benefit from intelligent features: Ì AutoFill - makes filling easier and prevents overfilling Ì AutoWash - easier, safer and more efficient washing process

Normal RRP: £2,821

18-39 m

3000, 4000, 5000, 6000 l

HC 8600, HC 9600, ISOBUS

TurboFiller

464 pump 294-322 l/min

IntelliTrack (Option)

AutoFill

AutoWash

AutoNozzleControl (Option)

HARDI UK 4 Thorby Avenue, March, Cambridgeshire, PE15 0AZ Peter Wiles: 07901 856734 · Steve Dunning: 07785 707746

June 2020 www.farmersguide.co.uk 85

82-85 Cereals.indd 85

13/05/2020 12:53


New compact disc harrow makes online debut

Updated design for next generation self-propelled sprayer A new generation of Condor selfpropelled sprayers introduced by Agrifac has an updated design, in line with the Condor Endurance II, with another major update being the Stage 5 Cummins engine built into the heart of the machine. A number of improvements were also made in line with the company’s ‘4 e for growers’ concept. The patented StabiloPlus chassis provides ‘unparalleled’ stability in comparison to any other sprayer in the world, Agrifac says. The GreenFlowPlus ensures continuous pressure using the specially designed pump, so that there is no difference in spraying at any point during operation, and no residual liquid left in the tank. Its comfortable cab features the EcoTronicPlus control system, which

is easy to understand and operate. With options that give a wider track width (WideTrackPlus) and higher ground clearance (ClearancePlus), the Condor concept can also be used in specific circumstances and the most diverse crops. In addition to various possible options and versions, the Condor is ready to spray on plant level, ensuring each individual plant receives the required dosage specific to its exact needs, thanks to Agrifac innovations such as AiCPlus (location-specific spraying using camera technology) and DynamicDosePlus (individual dosage per nozzle). Previously only available on the Endurance II, these innovations are now available on the Condor V, which is available with 4,000- or 5,000-litre tank options, and booms of up to 48m. FG

When it comes to cultivation, the trend for using cover crops provides the flexibility to both establish that cover crop, and handle more organic matter when it comes to sowing the cash crop afterwards. With this in mind, compact disc harrow design is changing, says Amazone. The manufacturer’s new CatrosXL 03-2TS, available in 4, 5 and 6m working widths, and CatrosXL 03-2TX in 7 and 8m working widths, will make their debut at Cereals LIVE. The two-row disc harrow features a 610mm diameter disc that can be coarse or fine serrated; the aggressive impact angle provides the optimum soil movement and perfect mix; and the oil-immersed bearings are lubricated for life and have

increased dimensions to stand the extra load. A choice of systems can be specified, such as the knife roller to crush cover crops ahead of the discs; a straw harrow to help distribute the chaff, volunteers and straw left behind the combine before cultivating; or a crushboard for working after the plough. The three-model line fits in between the Catros+ and the Certos. For perfect reconsolidation and maximising volunteer germination following the CatrosXL, there is a choice of 11 different packer rollers with soil-on-soil or disc rollers, and the strip-wise consolidation potential of the wedge ring roller. The CatrosXL can also be equipped with the Isobus GreenDrill 501 small seed applicator. FG

"StrictHeightPlus on the Agrifac Condor is much more superior than any other machines’ boom control we have previously run on the farm." Find out more about the ‘Brilliant Simple’ features of the Agrifac Condor today. Book an on-farm demonstration and experience the latest Agrifac technology for yourself. Contact us now! Southern region - Julian Arrowsmith: 07825 261853 Northern region - Chris Potter: 07741 312197 Email: info-uk@agrifac.com

www.agrifac.co.uk

86 www.farmersguide.co.uk June 2020

86-89 Cereals.indd 86

20/05/2020 09:25


Cereals Showcase

New trailed sprayer built for flexibility The new Bargam Spraymax trailed sprayer is designed to be market leading, boasting the latest technology and a substantial spec list. But it can also be tailored to suit a wide range of budgets and requirements, says Merse Agriculture. New for 2020, the Bargam Spraymax trailed sprayer has been brought to the UK market, having been in development for some time. Due to be unveiled at the now-postponed Cereals event, the machine replaces the Fox and Compact machine and offers tank sizes of 2,500–6,500 litres and 18–36m booms. This sprayer offers the latest technology and a substantial spec list as standard, including in-cab controls of filling valves, spraying system and cleaning system. It boasts a new agitation system which pre-selects nozzles inside the main tank electronically, depending on tank volume, to get the best agitation possible without foaming the product. Among many other features, the sprayer has an internal tank washing system, extending hose for external washing and 35-litre induction bowl. It also comes with hydraulic folding

Designed to meet the needs of all prospective clients, the sprayer comes with an impressive spec for top-end budgets, but it can also be tailored to suit smaller budgets.

seven-section booms, and variable geometric folding which allows the boom sections to change relative angles to follow ground contours. Adjustable wheel track is available on the 4,500-, 5,500- and 6,500-litre models. The pump is a 380-litre AR pump as standard, with hydraulic drive to eliminate PTO shaft fouling when turning and this also supports 3in plumbing for fast filling and boom recirculation, for even distribution throughout the boom. Individual nozzle control also comes as standard with the Arags Sele-tron system, which can be upgraded for independent nozzle selection in the cab for additional output in the field, without having to leave the tractor seat. The Spraymax is Isobus compatible as standard but Merse says it can supply a range of controllers and GPS systems

to control the sprayer functions, hydraulics, steering axles and auto height functions as necessary. The Isobus screen allows users to programme the machine for the required function, whether that be cleaning out, spraying or taking on water.

Designed to meet the needs of all prospective clients, the sprayer comes with an impressive spec for top-end budgets, but it can also be tailored to suit smaller budgets and requirements, for those who require a simpler system or cannot justify the purchase of a high-end machine. FG

Main dealer for BARGAM Agriculture Machinery Main Dealer for BARGAM Agriculture Machinery

Merse Agriculture can supply new and used equipment, servicing and spare parts for all types of sprayers

Why choose MERSE Agriculture? UP DATE D G RI M P E UR J R WeNEW provide sprayers, servicing and spares Check out the website for more information and the rest of the range

www.bargam.co.uk

Quality • Performance • Precision

01361 408532 www.bargam.co.uk 86-89 Cereals.indd 87

Quality • Performance • Precision

01361 408532 www.bargam.co.uk June 2020 www.farmersguide.co.uk 87

15/05/2020 12:53


Cereals Showcase Virtual exhibition to showcase grain storage equipment Gibbons Agricultural is set to host a virtual exhibition on YouTube, showcasing some of its range of Plug&Cool grain storage equipment after the postponement of the Cereals Event 2020. The video will feature Gibbons’ best-selling grain fans, durable pedestals and user-friendly Airspears, as well as the Multi-Zone Control Panel, which the company says is already proving popular. It allows users the independent control of any number of grain fans in up to four zones of their grain heap. This results in huge amounts of saved time and energy, as the panel will automatically turn on fans in hotter areas of the heap, leaving those in cooler zones switched off.

Unlike costly modular systems, users only need to purchase a single panel. It can be easily set up, with no need for an electrician, and it is even completely mobile – allowing users to move it between grain stores as needed over the years. In order to make the exhibition as useful as possible for visitors, the company is asking viewers to email questions to marketing@ gibbonsgroup.co.uk so they can be included in the final video. The company is sending freebies to those who send in a video of themselves asking a question. The exhibition will be available to view at www.youtube.com/ GibbonsGroup. FG

Hybrid cultivator extends application range Lemken is introducing the Koralin hybrid cultivator for ultra-flat stubble working, which promises reliable control of weeds, even in large areas or where straw has not been removed. Symmetrical forward-running discs attached to secure leaf springs have already proved their worth as they are fitted to the Heliodor compact disc harrow, the company says. With a 510mm diameter, the disc generates an abrasive sub-soil profile, which prevents the share forming a layer of compacted soil below. Discs can be used systematically to perforate the soil at the bottom of the shares and promote drainage of surface water. In average to heavy soil conditions, the discs improve the

crumb structure of the soil during seedbed preparation. Tines with duckfoot sweep shares are secured to the main frame by a spring overload device, so that the shares can work over the whole surface for sustained periods. At working depths of 2–10cm, the duckfoot sweep shares cut the roots of the weeds or cover crop horizontally like a knife. Shares are available with hard metal tips, which increase life expectancy, reduce costs and reduce machine downtime to a minimum. The depth guidance system operates accurately by means of stabilisers within the device, so the roller can be replaced by a multirow harrow for more effective weed control. FG

TWO BRANDS – ONE FAMILY

THE EXPERTS FOR SUSTAINABLE CROP CARE

t your Contac dealer! N LEMKE

LEMKEN: Precision fertilizing and spraying solutions

STEKETEE: Precision weeding solutions

For every requirement the right spreader or fieldsprayer: With and without ISOBUS, mounted, trailed or selfpropelled, we support you with reliable, user-friendly and highly efficient fertilizing and spraying technology.

Space to grow for your crop: From camera-steering to hoeing tools, we support you with customized, easy-to-use and intelligent weeding technology for fatigue-free farming.

88 www.farmersguide.co.uk June 2020

86-89 Cereals.indd 88

15/05/2020 12:54


NORAC Boom Height Control Systems available for select manufacturers The Benefits of Boom Height Control

Reduce Operator Stress • Operators no longer have to continuously look at the boom • Allows operator to focus on drive path • Operator can go faster Cover More Acres • Work day and night – sensors do not need light to “see” • Take advantage of low wind conditions at night • Spray faster – no manual boom adjustments Other Benefits/Features • Boom height control systems may offer other features such as Headlands Assist so that the boom can be automatically lifted and lowered at the end of the field • Satisfaction guaranteed Derek Johnston +44 (0) 1228 580372 sales@precise-solutions.co.uk

Cote House, Wetheral Carlise, Cumbria CA4 8HZ

Maintain Proper Spray Tip Height • Increase application efficiency – get the most from your spray • Too low = Streaking • Too High = Drift Issues • Ensures chemical application is not wasted due to improper boom height Protect Sprayer From Damage • Accurate control • Avoid ground strikes • Prevents downtime from repairing bent booms and broken spray nozzels Hybrid Mode™ • An advanced crop sensing feature for in-crop spraying that eliminates the need for the operator to take manual Patented control of the boom in a row crops or adverse situations such as lodged, thin and uneven crop

Precise Solutions www.precise-solutions.co.uk

Time for a Re-Think ? Last year’s wet Autumn highlighted the risks of both later drilling dates and climate change, resulting in many farmers re-thinking their approach to drilling. KRM Sola “all weather” tine drills ensure your crop can be sown in the wettest seedbed to the hardest, dry conditions, with the benefits of less weight on the seedbed, less horsepower and and less fuel used. Choose your tine: Elite – for conventional or min-till PT - narrow carbide tip for low disturbance min-till or ploughed SM - H.duty for direct and low disturbance min-till or ploughed Tel : 01423 324221 E mail: info @krm-ltd.co.uk

New model with pressurised hopper and ISObus controlled electric metering

Re-thinking ? . . Find out more at www.krm-ltd.co.uk June 2020 www.farmersguide.co.uk 89

86-89 Cereals.indd 89

19/05/2020 09:44


STORAGE

Poundfield Products Ltd is a Suffolk based manufacturer of precast concrete. Whether you are looking to reconfigure your existing storage or build new facilities we have the right solution for you!

CALL NOW 01449 723150 www.poundfield.com

REBELL -classic- T The powerful disc harrow

For shallow soil cultivation after harvesting.

Contact in the UK- Steve Berry Phone: 01256 - 384208 Mobile: 07860 - 663104 | www.koeckerling.de

90 www.farmersguide.co.uk June 2020

Farm sale.indd 90

18/05/2020 11:59


Machinery

Nottinghamshire auction sale draws the crowds One of the very last auction sales to take place before ‘lockdown’ offered a large selection of items to bid for – from modern farm machinery to older classics, and a wide variety of farm and workshop sundries. The sale at Penniment House Farm, Mansfield, was organised by Bagshaws auctioneers which has offices in Staffordshire, Derbyshire and Nottinghamshire. Much of the machinery was being sold on behalf of the Bates family. John and Andrew Bates, and John’s son Richard, have farmed Penniment House Farm for many decades and are well known in the area. The sale resulted from a change in farming policy by the family which has given up active potato growing to concentrate on livestock, along with successful butchery and shop enterprises. ‘Included’ lots were from the family of the late Bill Wildgoose, who farmed at Glapwell, Derbyshire. The combined offering created a very attractive event for potential buyers, including a mix of modern high-quality farm machinery and collectibles such as vintage tractor parts and workshop equipment – many of which were available for purchase without VAT.

Wide appeal “There was a very good attendance,” said Bagshaws partner and auctioneer Mark Elliott, who sold the lots with fellow auctioneers Meg Elliott and Alastair Sneddon. “We had buyers from local farms and from further afield – including Northern Ireland, Eire, Scotland, Devon and Norfolk – and the week before the sale, there were many phone enquiries regarding some of the lots. “The Manitou handler was probably the best I have sold in more than 30 years in the trade. It was

exceptional inside and out – it drove as though it was new, and the rear hitch was unmarked having never been used. An elderly John Deere tractor made excellent money too – again, it was one of the best examples of its age I have ever seen and attracted interest from across the UK and abroad. Among the potato handling equipment on offer, a Terry Johnson Swift-Lift Extenda 15m cleated belt elevator with 2m Safe Down, remote control, and powered drive and slew made £7,050. Mark said the weather on the sale day was good, encouraging lively bidding. “We were unbelievably lucky as it rained during the week prior to the sale, stayed dry during bidding, then rained again as soon as the sale had finished.”

Sundry highlights Sale highlights among sundry items included an anvil which made an impressive £290, MF 100-series front wafer weights which made £260 for a set of 10, and T-bar pick-up hitches which made up to £200 each. Ninehole Ferguson drawbars sold for up to £28 each, but there were bargains too, including a set of Ferguson side panels for a 35 or 65 model at £18. “Having lots from the two farms proved mutually beneficial to both parties, adding considerably to the level of interest and sale attendance,” confirmed Mark. “Both families were very pleased with the results achieved, and those who attended, whether they succeeded in buying something or not, enjoyed the day.” FG

{farm sale

}

Bagshaws partner and auctioneer Mark Elliott is pictured taking bids for a Massey Ferguson 6150 at a mid-March Mansfield, Derbyshire dispersal sale.

A Massey Ferguson 6150 4wd Datatronic with Dynashift 40kph transmission had been converted to electronic shuttle and was equipped with three spools and twin rear linkage assister rams. On 420/85R38 rear, and 13.6R28 front tyres it was registered with a 1996 P-plate, had recorded only 5,490 hours and sold to a trade buyer for a very impressive £11,400.

JCB loader backhoes are always in demand and this 3CX 4wd Turbo with Extradig, shuttle transmission, a six-in-one bucket and on 18.4-26 rear tyres was registered on an F-plate and achieved £8,300.

June 2020 www.farmersguide.co.uk 91

Farm sale.indd 91

18/05/2020 12:00


Machinery

 This Manitou MLT629 handler was in exceptional condition for its age, despite having worked more than 2,200 hours. It was one of the ‘included’ lots and was registered on a ’63-plate’. It was sold with pellet tines and equipped with four-wheel steering, a JSM joystick, air conditioning and an air seat. It also had hydraulic-operated attachment locking pins. The handler had been owned from new since being supplied by local dealer B&B Tractors. It achieved a very impressive winning bid of £29,200 from a trade buyer, and its condition was described by auctioneer Mark Elliott as an ‘absolute credit’ to the Wildgoose family.

This grey and gold Massey Ferguson 35 4-cylinder diesel tractor came with a Ferguson 735 front loader and forks, a safety frame and new tyres all around. It was in very good condition having been recently refurbished and it sold to a farmer for £3,620.

This older Massey Ferguson 35 with a 3-cylinder diesel engine was on 12.4/11-28 rear tyres and had no roll bar. It was equipped with a pick-up hitch and the tinwork was generally good with some recently replaced. The engine had been rebuilt and the winning bid was £2,750.

This 10.6t Norton grain trailer was one of the sale highlights. With tandem sprung axles and 13.5/75-430.9 tyres, it had twin tipping rams, a manual rear door with a grain chute, hydraulic brakes and lights. The winning bid was from a farmer who paid £4,500. “It was in good condition and achieved a very good price,” explained Mark Elliott. “The under-bidder commented after the sale that he had tried to buy the same trailer 10 years earlier when it was bought at auction by the Wildgoose family. He said that he stopped bidding this time at approximately £1,000 more than when it sold before, so clearly it has served the family well for 10 years and still made them a profit.”

A highlight among the trailers sold at the event was this Marshall MB10 tandem axle monocoque body 10t grain trailer. It had rocking beam axles, a manual rear door with a grain chute, and a roll-over sheet. Wheels and tyres were 385/65R22.5 and the trailer had hydraulic brakes and LED lights. In good condition it sold for £3,100.  Another ‘included lot’ was this John Deere 6610 4wd. It had been owned from new and sported its original Sharmans dealer stickers. It carried a 2000 W-prefix registration and had worked 4,948 hours but remained in superb condition. The specification included air conditioning, PowrQuad 40kph transmission, plus three hydraulic spools and an extending hitch. It was on Michelin 18.4R38 rear, and 16.9R24 front tyres and sold for £30,000 to a Yorkshire collector, having attracted pre-sale interest from potential bidders across the UK.  Demand in recent years for smaller potato planters has declined, and this elderly but tidy Reekie RMP2 twin-row mounted model with a top-mounted pellet applicator achieved £300

Potato handling machinery included this Peal three-phase Belt/Brusher unit with a 3ft end-drive roller table . It made £1,700.

£4,200 was the winning bid for this tidy 2003-manufactured Spearhead XL605 flail hedgecutter. The Excel model came with an electronic joystick providing proportional control and 540rpm PTO drive.

92 www.farmersguide.co.uk June 2020

Farm sale.indd 92

18/05/2020 12:00


The Pioneers in Sleeper Accommodation The UK’s Largest Hire Fleet

JUNIOR DELUXE SLEEPER

SINGLE UNIT

TWIN UNIT

Visit the Bunkabin website to see our full range of sleeper units

• • • • •

Can accommodate one, two, or three people Thermostatic controlled heating High-spec en-suite bathroom Plenty of storage space Tilt-&-turn window with integral blind

FS 26786

Nationwide Hire Desk 0345 456 7899

SEMS 557447

Bunkabin_Farmers Guide - Half Page Advert - 190x133mm deep.indd 1

06/02/2020 16:42

GENUINE BALING PERFORMANCE FOR GENUINE FARMERS

June 2020 www.farmersguide.co.uk 93

Farm sale.indd 93

18/05/2020 12:03


B

Y

RACKENBUR engineering Ltd

Suppliers of new and secondhand grading/handling machinery for potato and vegetable growers, packers and processors

FOR SALE...

72204

RURAL AFFAIRS Practical advice tailored to your individual circumstances

New 2 x 10m x 900mm SwiftLift Interstore conveyors with inverter drives & road wheels, 3 phase, ex stock for immediate delivery

New rubber lined Big Bag Fillers from stock for immediate delivery

New Easy Tip centre pivot box tipper 3 phase, hand pendant up/down from stock for immediate delivery

New all stainless steel fully pintle lined Sample Washer with basket, 3 phase, from stock for immediate delivery

For more stock please visit: www.brackenburyeng.com Please contact David Brackenbury T: 01526 341252/341635 • M: 07837 226740 • F: 01526 323182 E: davidbrackenbury@btconnect.com

SUFFOLK TRAILER LARGE CAPACITY, ROBUST AND DURABLE • Heavy duty monocoque �pping trailers with a world-wide reputa�on for strength and durability. • Designed and engineered to maximise efficiency op�mising the strength to weight ra�o and enabling you to deliver full payloads with a low unladen weight. • Available in 11 to 24 tonne models with an impressive array of standard features and a wide choice of op�ons, you can build the Suffolk trailer to your exact requirements. Suitable for grain, silage and general purpose haulage.

           

Land and property transactions Farm business tenancies and grazing licences Creation of easements Planning Disputes Employment matters Options, overage agreements and conditional contracts Inheritance tax planning and succession issues Business advice Health and safety issues Farm accidents Financial planning

01473 230033 enquiries@ellisonssolicitors.com

www.ellisonssolicitors.com Ellisons Solicitors is authorised and regulated by the Solicitors Regulation Authority. SRA Number 49336.

BALE TRAILERS STRONG AND VERSATILE FLATBED TRAILERS • A range of tandem and tri-axle, flatbed trailers designed with an integrated pla�orm and chassis to provide maximum strength and reduce twis�ng. • All trailers have a 4.5mm steel chequered plate pla�orm, an integrated strap storage box on the kerb side, and sockets front and rear for headboard and ladders. • A removable 2� headboard is standard and comes with sockets for a front bale ladder. • Available in 20 tonne model, you can customise the flatbed trailer to meet your needs. • Trailers fi�ed with 445/45R19.5 wheels are available with a low rider pla�orm. • The reduced pla�orm height is ideal for maximising pay-loads or moun�ng livestock containers.

SRT STONE & RUBBLE TRAILER HEAVY-DUTY TRAILERS FOR TOUGH JOBS • Heavy-duty trailers with reinforced 6mm sides and 8mm floor. • Ideal for moving stone and rubble. • The strong body prevents damage and protects against debris and foreign objects. • Available in 20 tonne model. • Designed for use with high speed tractors. • Fi�ed with commercial axles on 420mm x 180mm brakes.

CLAAS WESTERN Please contact your local CLAAS Western branch or call WESTERN Cirencester (Head Office) on Tel: 01285 863190

Please contact your local OLIVERS branch or call OLIVERS Luton (Head Office) on Tel: 01582 727111

PROVEN IN THE FIELD 94-97 News.indd 94

18/05/2020 10:56


News

Agri law firms announce merger Ellisons Solicitors has merged with one of Suffolk’s leading agricultural law firms, Blocks Solicitors – a move which unites the firm’s existing rural specialists with the experienced agricultural team at Blocks. As a result of the merger, which took place on 1st April, the firm says it can now offer unrivalled legal advice to Suffolk’s farming businesses and landowners. Blocks Solicitors will remain at its offices on Arcade Street in Ipswich town centre, carrying the new name, Ellisons Solicitors incorporating Blocks. Current equity partners at Blocks, Andrew Fleming and Frances Barker, will continue on as partners. Frances specialises in employment law and has experience in a wide range of environments, including agriculture. Meanwhile, Andrew is a highly experienced practitioner, advising agricultural clients on cases involving anaerobic digestion plants, as well as

Simple solutions for safe, reliable machinery

his specialism of corporate and commercial law. Ellisons’ managing partner, Guy Longhurst, says: “We’re delighted to have merged with Blocks Solicitors, which perfectly reflects Ellisons’ ethos of providing our clients with the highest possible standard of service. This is of course an extremely challenging time for everybody, but Ellisons has helped its clients and colleagues through various crises during its 250-year history, and now look forward to supporting the clients, colleagues and contacts of Blocks.” FG (l-r) Ellisons solicitors Tim Logan, Guy Longhurst and Seamus Clifford.

Small margins and costly machinery repairs have always been a concern, but in these troubled times, reliable, fit-forpurpose machinery has never been more important. Smart Farmer developer and farm manager, Marc Skivington, says farmers are increasingly looking to benefit from the system’s simple solutions to logging machinery checks and maintenance and servicing. “The uptake in this new development has blown me away,” he says. “I knew it was missing from the sector but never expected this amount of interest in the first quarter since its launch at Lamma. I initially developed the app to aid my management of my machinery.”

Farmers and other users of the system can view the status of each machine at a glance, with the easy-to-use traffic light system; and view any ongoing raised and resolved issues, adding a photo to make a raised issue easier to identify. The previous user can also be identified and you can log the daily operational hours of the machine. Setting a service notification means you never miss a service on a machine with multiple users. The option to print service reports has recently been added, as well as a swipe function. The system can be used by unlimited users and machines and with the sector becoming increasingly aware of farm safety, it can be used as a tool for planned preventative maintenance (PPM). FG

72241

Tel: 01569 750498 • Mob: 07860 928665 Email: marc@smart-farmer.co.uk www.smart-farmer.co.uk

A Cloud Based Software System and App for Farmers Recording Pre Start Checks of Farm Vehicles and Machinery Utilising an Easy to Use Traffic Light System for Logging Routine Maintenance Management June 2020 www.farmersguide.co.uk 95

94-97 News.indd 95

15/05/2020 16:56


News

New machinery range hits the UK market An exciting new brand, named after the Roman goddess of agriculture, Ceres, symbolising nourishment and food, is set to launch its first range of products. After years of experience designing and building farm machinery for other distributors, or for online sales, the Ceres team is unveiling its own branded range. The Ceres range was due to be launched at this year’s cancelled Cereals event, and will comprise a broad range of machinery including the Ceres Barn-Stormer grain pusher, which is available from 1st June.

According to the company, the Barn-Stormer is the ideal solution for grain handling, with its 2.5m wide head shaped to propel cereals quickly and evenly; and a low maintenance, hard-wearing rubbernylon replaceable wear strip suitable for concrete, vented or slatted floors. It is easy to use and designed with no grain traps, the development team says. The large centrally-mounted

tube, which is substantially braced back to the headstock brackets, allows for increased visibility and manoeuvrability around vents, ducts and beams. It is available in a large variety of lengths, from 3.5–16m, and built to order to suit your telehandler or loading shovel, whatever bracket configuration you may have. The company aims to release a new product every month, from an extensive range comprising materials handling equipment, including a grain bucket, telehandler buckets, digger buckets, headstocks/ converters, muck grabs, bale spikes and telehandler machine movers – as well as a big bag lifter due for launch in August. New cultivation equipment will include grass harrows, subsoilers, aerators and a mole drainer due to make its debut on 1st July; while the maintenance range includes pipelayer, graders, ballast roll, and a post-knocker and log splitter due for release later in the year. Commenting on the new range, company founder Martin Johnson says: “We feel that now is the right time to start releasing a dependable range of products that have been in

development for a number of years. All our machinery is designed and fabricated at our two manufacturing facilities in the United Kingdom. “Some of our machinery has been tried and tested through well-known, reputable brands to ensure quality and reliability, so we can produce implements built to the highest standard which our customers can trust.”

While Ceres may be the youngest agricultural brand on the market, its brand manager has over 25 years of experience in the development and application of agricultural machinery in some of the world’s harshest environments. FG

01223 613246

info@ceresmachinery.com www.ceresmachinery.com

THE NEW CERES BARN-STORMER Available from 3.5 to 16 metres 6 metre in picture

BUY ONCE. BUY RIGHT . BUY BRITISH.

96 www.farmersguide.co.uk June 2020

94-97 News.indd 96

18/05/2020 14:36


Innovative Tillage Technology

Reversible Mounted Ploughs

www.halse.co.uk

85 YEARS (1936-2021) www.ovlac.com

Ovlac build ploughs to suit your conditions and available tractor power. With over 400 versions we are sure to have a plough to suit your requirements.

Robust 1 Piece Turnover Shaft

The oscillating headstock saves time with plough set up. As the plough is always perfectly aligned, fuel usage and traction are optimised. Hardox steel is used throughout construction which provides incredible strength whilst reducing weight. Excellent inversion from well proven mouldboard design which accommodates up to 710 tyres.

Self-Aligning Headstock

Parallelogram System

Rear or Advanced Combi Wheel

Hardox Legs New Design Improved Trash Flow

QUALITY EXPERIENCE EXPERIENCE QUALITY Tramspread Half Page FMJ 132x188.qxp_Layout 1 25/03/2020 14:27 Page 1

3-6 Furrows Mounted Shearbolt or Hydraulic trip safety protection Manual or Hydraulic vari width Choice of well proven 8mm mouldboards/or slatted version Front furrow width gauge when specified with powerful hydraulic first furrow Contact us or one of our expanding network dealers for more information on Ploughing Ahead with Ovlac. Join us in turning more furrows and invest with confidence with a free 3 year warranty on beam & Lorem ipsum headstock. (T&C’s apply).

FLEXIBILITY FLEXIBILITY

UK Sales Nick Clark Mobile 07768 602670 Email nick@halse.co.uk

For over 30 years Tramspread have supplied and manufactured slurry equipment. Our products have been rigorously tested by our contracting division and we trust them to do the job every time. RECK SLURRY MIXERS

TANKER APPLICATORS

SLURRY STORAGE

ENGINE PUMP UNITS

TRAMSPREAD UMBILICAL SYSTEMS

For help and advice adapting your farm to meet DEFRA’s Clean Air Strategy.

CONTACT US TODAY SLURRY STORE COVERS

HOSE AND COUPLINGS

DIGESTATE AND SLURRY MANAGEMENT

STALLKAMP SEPARATORS

Call: +44 (0)1449 766133 Email: info@tramspread.co.uk Visit: www.tramspread.co.uk

LOW EMISSION APPLICATORS

June 2020 www.farmersguide.co.uk 97

94-97 News.indd 97

15/05/2020 16:59


CAN YOU HANDLE ZERO INTEREST? Turbofarmer range now available on 0% interest free finance Contact us for more details rcboreham.co.uk 01245 231320

Now Kuhn Dealers for Essex

LEMKEN & CLAAS EASTERN

Contact your local EASTERN branch for more information today.

EASTERN Brigg 01652 651810 EASTERN Catfoss 01964 545300

EASTERN Markham Moor 01777 838888 EASTERN Sinderby 01845 567407

www.claas-eastern.co.uk

EASTERN Sleaford 01529 303093 EASTERN Ulceby Cross 01507 462288

EASTERN Wilberfoss 01759 388811 A WOODS 01406 426108

facebook.com/CLAASEastern

CLAAS EASTERN 98-99 Lemken.indd 98

18/05/2020 11:50


Machinery

Cultivator shines on both shallow and deeper work A tined cultivator is proving highly versatile at Turnstone Farms, near Kings Lynn in Norfolk, where wheat, winter and spring barley, potatoes, sugar beet and energy maize are grown on land ranging from sand and flint, to silts. The joint venture business, which is run by three partners, covers some 2,000ha, and manager Adrian Howell explains that a 6m Lemken Karat 9 tined cultivator has been an important part of the fleet for eight years. “The Karat covers some 400ha per year, working shallow to incorporate cover crops or organic manures on the light land, or deeper to create a seedbed in a single pass,” Mr Howell says. “It’s easy to adjust the working depth hydraulically as you go into

the field, working as shallow as 5cm or as deep as 25cm.” Designed to offer cultivation across the full surface, the Karat features three rows of tines at 28cm spacings, with 70cm clearance between the rows. This is followed by a row of concave discs and a packer roller. Hydraulic weight transfer from the cultivator to the rear tractor axle gives increased traction and reduces fuel consumption. Mr Howell comments that, while the autumn of 2019 was too wet to

Adrian Howell in the field with his Lemken Karat 9 cultivator in Norfolk.

use the Karat on the heavier silt land, it could still make a seedbed after the potato harvest or behind oilseed rape on the lighter land. Swapping the points helps to adapt to different conditions, with narrow points favoured for heavier land in a very dry autumn when the wider feet could bring up hard clods. Similarly, the narrow points are utilised on heavy land in the spring to avoid the possibility of smearing and bringing up unweathered soil from beneath the surface. “As the Karat has plenty of clearance between the tines, it copes really well with trash, and the discs chop and mix residues so there are no blockages. It also produces a good finish to drill into with its rear packer roller,” he points out. “You

2630

can achieve thorough incorporation and also consolidation by using it to create a seedbed.” When the Karat is used for primary tillage, it is possible to go straight in afterwards with a cultivator drill. Soils on the silt farms are relatively kind, so points don’t wear too much – although specific hardening materials are used to prolong point life on the lighter soils, observes Mr Howell, adding that the Karat has the typical Lemken strong build, with no major issues in eight years’ use. At Turnstone, the 6m cultivator is pulled by either a Fendt 936 or a Quadtrac. “It’s a very flexible implement which gets plenty of work but has stood the test of time,” he concludes. FG

SMALL BUT MIGHTY Our most agile compact loader combines a high-pressure drive with an electronicallycontrolled autodrive for high torque and efficiency. Compact, powerful and comfortable, the 2630 is top of its class.

SCHAFFER.UK.COM June 2020 www.farmersguide.co.uk 99

98-99 Lemken.indd 99

18/05/2020 11:50


News

Business set to pass to next generation

New flatbed/bale trailer introduced Manufacturer Harry West (Prees) Ltd has recently introduced the West flatbed/bale trailer to complement its existing trailer line up. Two models are available – the FB26 and the FB32 – which are 26ft and 32ft long respectively and both have a 14t capacity. The use of 250 x 150 box section in the construction and full commercial parabolic springs with ADR hubs, give the trailers a very strong and durable construction, the company says. A similar construction was used in the West C27 trailers, which are made up of 14t and 16t capacity grain trailers and silage trailers. With a short compact design, these trailers give good manoeuvrability. Both the FB and C27 ranges

have numerous options with tyre choice, air brakes, ABS systems and the ESP information unit, which is incorporated in the ABS control block and gives operators an accurate record of miles/km travelled, speeds travelled and weights carried. This can give contractors simple details when costing work is carried out. There is also still the option of a ‘classic’ built trailer in the 10t and 12t capacity grain/utility and silage trailers, which run on the rocking beam design. They are both road friendly but come into their own when used on undulating fields and heavily rutted lanes and gateways, Harry West says. The units are available with spring system axles. FG

Harry West

Pressure washing service T Workshop Equipment is looking to the future, as owner Tim Bradford (right) thanks his loyal customer base and plans for the next step in the business. Q. How did the business start? A. I started the business in 1989, having been in the industry since 1970, firstly with Martin J Storey Ltd, who was just starting to produce the TW brand of power washers in Ipswich. We covered the whole country, mainly selling to the farming industry, and later expanding. Gradually we enlarged the business, incorporating rental as well as sales, moving into compressors and workshop heaters.

Q. What does your product range include? A. We are a main dealer for the Ehrle range of high-pressure washers and also sell the Kranzle range. We produced a diesel engine range of our own, and added a heavy-duty range of air compressors from AIE. Q. What are your future plans? A. My son Paul (pictured below left) joined the company 15 years ago. He is now conversant with all aspects of the business and is due to take over on my retirement. Paul will continue to offer a full service and sales programme, while updating office procedures and the website. I will still be available to offer advice and support when necessary. I would like to say a big thank you to all our faithful customers, both big and small, who have contributed to the success of T Workshop Equipment over the last 31 years. FG

Rear Discharge

72194

LED lights

The West Maelstrom Rear Discharge Range from 8m3 to 18m3 Standard features Wide angle PTO with clutch protection anchor chain with padless connection on every bar LED lights

adjuster

Options Electric in cab bed control Slurry door with light protection Mud guards

floor

Harry West (Prees) Ltd • office 01948 840465 • fax 01948 841055 • email sales@harrywest.co.uk • web www.harrywest.co.uk 100 www.farmersguide.co.uk June 2020

100-103 News.indd 100

18/05/2020 11:17

2721


A Lynx-equipped tractor is ready for anything... (well almost)

Take the capability of your tractor into new territory with Lynx. Our accessories can equip any make or model for virtually any challenge.

^ Front Loaders ^ Front Linkages ^ Front PTOs ^ Weights

^ Rubber Tracks ^ Front Presses ^ Pick Up Hitches

For further details about the Lynx range, call Lynx Engineering today on ENGINEERING

01327 843215 or visit

www.lynx-engineering.co.uk

More ways to add more productivity

15/03/2019 10:52

HOT DEALS FROM

Parker Hydraulics & Pneumatics Limited Mobile Hose Crimpers

MCX20

MC 1001 air operated

MC 1001 manual

72088

2721 Lynx Trolltunga ad FG.indd 1

Wash Lane, Mendlesham, Stowmarket, Suffolk IP14 5TD Tel: 01449 766157 Fax: 01449 767894

A SUPERB RANGE OF PRESSURE WASHERS AVAILABLE FROM T WORKSHOP Kranzle K 2160 TST • 10.5 ltr/min • 135 Bar (150 max) • 240 volt • low pressure detergent • Dirtkiller lance • hose drum, inc 15m hose

Kranzle K 1152 TST No-skive spiral hose up to 1”

• 10 ltr/min • 130 Bar (150 max) • 240 volt • low pressure detergent • Dirtkiller lance • hose drum, inc 15m hose

Wire-braid hose up to 1”

In the field, every minute counts. In today’s environment, equipment, whether it be agricultural, construction or mining, simply cannot afford unnecessary downtime. That’s why Gates has developed a range of small, portable and easy to use crimpers specifially designed for end-users on site. Since these simple, lightweight machines are designed as a part of the Gates Integrated System, end-users are assured of factory quality no-skive assemblies – even in the field.

Ashbourne Estate, Mile Cross Lane, Norwich, Norfolk NR6 6RY Tel: 01603 403190 Fax: 01603 485337 Email: sales@parkerhydraulics.co.uk

Ehrle HD 828 Etronic II • mobile 240 volt hot water machine • for professional use • total stop/start system • leakage recognition • 24 volt safety circuit • low water & fuel cut-offs • flame failure sensor • hours counter • steam stage

Ehrle HD 623 Etronic I • mobile 240 volt hot water machine • for professional use • total stop/start system • leakage recognition • 24 volt safety circuit

SPACE WATCH THe IS Economy New Ehrl Model HD523

N

O COMING SO

GREAT DEALS AVAILABLE ON SALES AND SERVICING

www.twltd.co.uk FREE ADVICE ON THE BEST PRESSURE WASHER TO SUIT YOUR NEEDS

For details or a demonstration ring Tim Bradford now on

01449 766157 or fax 01449 767894 June 2020 www.farmersguide.co.uk 101

100-103 News.indd 101

18/05/2020 10:45


News

Renewable energy production hits record levels Hay and straw baling made easier Hay making is upon us – all the machinery is serviced and ready for work, but no matter how much money is put into the latest tedders and balers, if the hay is too wet to bale it will produce poor quality forage. The most cost-effective weather insurance is Baler’s Choice hay preservative, according to Profitable Farming Company (PFC). It allows the moisture window to be increased from 0–15 per cent, up to 30 per cent moisture, with no need for single-use plastic.

Baler’s Choice is the strongest hay preservative on the market, from as little as 1.9-litre/t up to 22 per cent moisture on round bales and 20 per cent on large square bales. It has been proven and tested in all grass and straw types, PFC says. For hay and straw up to 30 per cent moisture, it is applied using the latest application technology. For users who do not want to commit to the fully automatic applicator, PFC offers the PFC Forage Solutions applicator – a digital control unit with a 12-litre/ min acid compatible gear pump. Setting the dose per tonne and the machine’s output, the system will apply product reliably. All balers can have the precision moisture meter installed. Once the crop is baled, tarpaulins are the final quality storage solution when shed space is at a premium. FG

The windy start to 2020 followed by the sunniest spring for years has meant record-breaking renewable energy outputs, with some owners reporting jumps of up to 20 per cent compared to the same period in 2019. This is according to Ivor Thomson, managing director of Natural Generation Ltd, which focuses on the operation and maintenance of over 500 UK wind turbines and dozens of solar power installations. Commenting on the effects of Covid-19, Ivor says all staff who can work from home are doing so and the head office and workshop has been split up to give separate areas their own entrance. Mobile wind technicians

have also been able to manage the new rules very well. A camper van has been bought for the team in more remote areas of Scotland and, though they can’t reach the islands when the ferry isn’t running, overall the impact has been minimal. “We’re working more efficiently than ever, allowing us to offer some competitive new deals, we’re still hiring, and we’re still opening a new 2,500sq. ft workshop in Scotland. Our staff have been incredibly adaptable and the number of hours our technicians worked in April in the field and in the workshop were actually 15 per cent up on last year, which is amazing considering the situation.” FG

• • • •

Approved for all livestock

102 www.farmersguide.co.uk June 2020

100-103 News.indd 102

18/05/2020 10:16


BEMA SWEEPERS UK & IRELAND

Tel: 01159630011 Mob: 07436272292 www.bemasweepers.co.uk info@bemasweepers.co.uk

JONES BROTHERS Pre-Stressed Concrete Wall Panels Inspired by the latest technology in Pre-stressed Concrete Wall Panels, and with the desire to continue in meeting our customers' requirements regarding Quality, Design, Volume & Delivery...

...we have opened a new & improved manufacturing facility in Greenfield, Flintshire, North Wales

FOR ALL YOUR BULK GRAIN HANDLING NEEDS ... ALL THE QUALITY YOU DEMAND, WITH NO COMPROMISE. Our Carier range is available from 10TPH to 150 TPH and with a 4 week lead time, to ensure you meet the demands of harvest 2020.

• Brand new precision built moulds & tooling • Larger range of sizes & loadbearing options (95, 145, 200 & new 240, 280mm) • Selection of Concrete Lego Blocks • Increased capacity • Made to measure • Shorter lead-times • Established Quality Assured products at competitive prices • Design & Bespoke Project capability 72130

www.guttridge.co.uk 01775 765300

t: 01352 719182 or 01352 716648 • f: 01352 837690 e: tracey@jonesbrothersconcrete.co.uk www. jonesbrothersconcretepanels.co.uk June 2020 www.farmersguide.co.uk 103

100-103 News.indd 103

18/05/2020 11:12


72294

MOULTON BALE GRAB RANGE BBG2 • F8BB • F10BB BBG2

BTC – THE OPTIMUM DISC HARROW

Designed to handle 3 smaller high density bales up to 900mm wide, or 2 larger 1200mm bales. Bales may be handled in both directions relative to the back frame. 2,600mm overall length, 2,400mm wide (excluding gathering bar), 800mm high at back frame.

F8BB A flat 8 sized bale grab of very heavy duty construction, fitted with larger claws. Suitable for handling flat 8 packs of conventional bales or up to 2 high density bales, 2m length, 1.6m width.

F10BB

BTC Disc Harrows available in 5 & 6-metre working widths

A flat 10 bale grab of very heavy duty construction, fitted with larger claws. Suitable for handling flat 10 packs of conventional bales, it has 5 rows of claws, this gives full cover on 2 high density bales, 2.5m length, 1.7m wide.

Prices start from

£21,995 plus vat

Smisby Road, Ashby de la Zouch, Leicestershire LE65 2UE

Office: 01684 310112 Nigel : 07850 825980 Ross : 07815 110529 email: info@bullocktillage.co.uk

www.moultonfarmmachinery.co.uk Phone 01530

Email

Bullock Tillage • Danemoor Farm • Malvern • Worcestershire WR13 6NL

Demonstrations Available

567040

info@moultonfm.co.uk

72190

Track Tractor Wheels Re-covering John Deere Case Quadtrac New Holland Challenger Claas CALL OR EMAIL US +44 (0) 1480 FOR A QUOTE NOW! 49 61 61

SALES SERVICE PARTS REPAIRS FABRICATION RESTORATION 01353 648078 I info@youngs-as.co.uk I youngs-as.co.uk The Workshop, Stowbridge Farm, Green End, Stretham, Ely, Cambs, CB6 3LF

www.cliftonrubber.co.uk sales@cliftonrubber.co.uk 72454

104 www.farmersguide.co.uk June 2020

104-105 Kockerling.indd 104

19/05/2020 14:25


Machinery

Upgrades improve penetration, mixing and chopping Kockerling importer Samagri has announced updates to its popular Rebell Classic T series cultivators. The Rebell Classic T is a versatile compact disc cultivator capable of deep cultivation direct into stubbles, but also achieves superb seedbed preparation after ploughing. Two rows of individually mounted and sprung 510mm discs achieve thorough mixing of trash and cover crops before drilling. Standard leaf springs maintain working pressure and ensure penetration on hard ground. Working depth is adjustable between 2–12cm. A choice of packers is available, but standard equipment includes Kockerling’s double STS roller consisting of rings with an open

outer U profile which fills with soil to keep the roller turning in sticky, wet conditions and ensures effective consolidation. New options this year include coil spring disc suspension as an upgrade from the standard leaf springs. Benefits include more aggressive disc engagement with the ground for improved mixing, and at higher working speeds the coil springs react faster on uneven ground so that even tilling depth is maintained. A front knife roller is another new option. The 360mm roller has six coiled knives and is described by the

manufacturer as ideal for chopping oilseed rape stubble residues and cover crops, ahead of mixing and incorporation by the following discs. On machines specified with coil spring disc suspension – hydraulic depth control is standard, allowing adjustment on the move from the cab. For accurate seedbed creation, a hydraulically adjustable levelboard is available. Mounted behind the discs and ahead of the rear packer, this helps evenly distribute loose material to achieve a level surface before consolidation. The levelboard is adjusted from the cab making it easy to compensate for variable conditions. For all Classic T models, a rear following spring tine harrow can be added. Tine working angle is

Upgrading from standard leaf springs to coil springs for each disc improves cutting and mixing performance, especially at high working speeds.

adjustable, allowing the user to set the level of aggression needed to achieve optimal levelling. Rebell Classic T models are available in 5m, 6m and 8m working widths and all are trailed and fold to 3m for transport. Hampshire-based Samagri believes the new upgrade options will increase the appeal of the Rebell Classic T to UK farms, and demonstrations of a 6m machine are available this autumn. FG

Designed to Work... Built to Last • Livestock housing • Feed storage • Crop storage • Equestrian • Leisure • Industrial • Bio mass storage

Lowlander ® Manure Spreaders 3 Year Warranty | Details available upon request

Twin Vertical Auger TVA | 6 – 40 tonnes

Horizontal Beater & Spinning Disc HBD | 8 – 40 tonnes Tel: + 44 (0) 1362 860352

72337

www.gtbunning.co.uk

bunning spreaders

marked

Browns of Wem Ltd, Four Lane Ends, Wem, Shropshire, SY4 5UQ Tel: 01939 232 382 www.BrownsofWem.com info@BrownsofWem.com June 2020 www.farmersguide.co.uk 105

104-105 Kockerling.indd 105

15/05/2020 12:59


News

Reducing food waste through good storage As we face challenging times, reducing food waste on farms has never been more important. Specialist equipment manufacturer Martin Lishman says simply promoting best storage practices offers huge potential. Cereals account for 30 per cent of annual food waste on UK farms, with a value of £26million for wheat alone, according to the charity WRAP (Waste & Resources Action Programme). Coupled with unexpected events such as extreme winter flooding and panic buying as a result of the coronavirus pandemic, it is ever-more vital to

ensure the flexibility and security of our food supply systems. There is huge potential to reduce the amount of waste on farms by simply promoting best storage practice, Martin Lishman says. The company’s Barn Owl Wireless systems help farmers to optimise crop storage conditions, drastically reducing waste and retaining higher-quality yield.

PRE HARVEST GRAIN STORE TREATMENTS

Sales director Ian Clayton-Bailey said: “Insect Infestations can wreak havoc in a grain heap if not properly handled; grain temperatures can rise unexpectedly, resulting in a drastic loss in quality. Having the ability to drive grain temperatures down quickly and efficiently to an acceptable level with the use of a reliable system such as Barn Owl Wireless, significantly reduces the risk of quality loss.” The systems use wireless temperature sensors, installed in many different configurations to suit any shape and size of grain silo or flat floor store, to transmit temperature data to the user via the mobile phone network and a cloud-based server. Store managers can then log on to the Barn Owl Wireless web page on any internetenabled device, check temperature and humidity readings for all their stores and manage the cooling fans according to the data shown on screen. Fans can be controlled automatically to cool or dry the grain without the need to travel unnecessarily to visit

the store which, during the current nationwide lockdown, is key to helping farmers keep the essential work going. Barn Owl Wireless cools efficiently, using only ambient air that is colder than the crop. This, combined with the precision of zonal cooling, enables the system to only cool the sections of the crop store that require it. The result is significantly reduced energy costs over conventional cooling methods; in most cases at least 40 per cent less energy is used. The crop temperature monitoring data received is stored, collated and displayed either graphically or in downloadable tables, which can act as supporting evidence of grain storage history when dealing with grain merchants and quality assurance assessors. FG

BEDEC

ACRYLIC BARN PAINT THE SAFE ALTERNATIVE TO TAR VARNISH, BITUMEN AND CREOSOTE EASY TO APPLY EXCELLENT COLOUR RETENTION MULTI-SURFACE APPLICATION FLEXIBLE - NO CRACKING OR FLAKING LONG LASTING FINISH

from our bases in Suffolk & Yorkshire

Ideal for workshops sheds, garages etc. One can does it all!

AVAILABLE NATIONWIDE THROUGH TRAVIS PERKINS, ERNEST DOE & SONS LTD, RIDGEONS, BREWER & SONS & DULUX DECORATOR CENTRES

71328

72260

info@alphafumigation.co.uk www.alphafumigation.co.uk

01473 623001

106 www.farmersguide.co.uk June 2020

106-111 News.indd 106

18/05/2020 09:06


72255

FUEL TANK STORAGE AND PUMP DISPENSING SERVICES

THE NATION’S CHOICE FOR A SECURE SITE

Specialising within the agricultural & haulage industry by qualified OFTEC engineers with over 25 years experience FUEL TANK REPAIRS & FUEL MANAGEMENT INSTALLATIONS FUEL FILTERS TANK INTERNALS & BUND CLEANING FAME – SLUDGE – CROSS OVER DELIVERY CONTAMINATION UPLIFTS & BUY BACK DISPOSAL SERVICE OIL SPILLS – TEMPORARY TANKS – HIRE TANKS NEW FUEL TANKS SUPPLIED ANNUAL SERVICE

SLIDING GATE FROM

£6,800*

• 6, 8, 10 & 12M OPENINGS • MOBILE PHONE OPERATED • CANTILEVER GATE - NO TRACKING

24/7 Emergency: 07974 495362

THE GROWING BUSINESS

01386 49155

ASK ABOUT OUR PAY AS YOU FARM PLANS

T: 01284 386538 - E: info@cargateweb.co.uk

*PRICES EXCLUDE VAT AND DELIVERY

www.cargate-engineering.co.uk

C B

R A D I O

WEAVINGMACHINERY.NET

S E E D

D R I L L S

I

C U L T I V A T O R S

I

F L A I L S

I

H E D G E C U T T E R S

11/05/2020 Freephone 0800 328 5492 Email sales@allertonuk.com

30872_e Weaving Gates Ad 93x133.indd 1

10:14

Call us NOW 01604 402403

www.allertonuk.com

ENCE NO LIC ED R REQUI

T-2000

em Specialists

t Treatment Syst

en Sewage & Efflu

In rural areas without a mains drainage system, and where septic tanks will no longer reach environmental standards,

Allerton can provide the ideal solution...

Trading since 1974, we pride ourselves on our individual problem-solving approach to finding alternatives for treating and disposing of raw sewage

The Allerton ConSept converts your existing septic tank or cesspit into a fully functioning Sewage Treatment Plant The Diamond Sewage Treatment Range is suitable for either individual homes or small population applications When gravity drainage is not possible, choose Allerton Pumping Stations for sewage or dirty water We provide Servicing & Maintenance on a wide range of sewage treatment plants and pump stations by BRITISH WATER ACCREDITED ENGINEERS

For the complete range of ALL CB Radios & Accessories visit

www.THUNDERPOLE.co.uk

£59.99

T-2000 Premium CB Radio with Advanced Features

The Dependable Choice in Drainage

71587

CB Radios

From

June 2020 www.farmersguide.co.uk 107

106-111 News.indd 107

18/05/2020 09:09


Users reap benefits from remote support A European online press briefing by John Deere explained how Connected Support is offering advantages during the current Coronavirus restrictions. Connected Support is John Deere’s answer to digitalisation, and more than 50,000 of its machines are now equipped with JD Link telematics. This allows remote machine monitoring and fault diagnosis by the manufacturer and dealers when access is authorised by the owner. Dealers featured during the event explained that faults can be diagnosed and replacement parts can be ordered while machines are still working. This helps avoid breakdowns

and allows updates and repairs to be scheduled when convenient. Expert Alerts was added in 2017 and uses information regarding faults which have occurred across all connected machines, then compares the use and performance data with that of similar models. Trends are spotted by the system and where faults are predicted, owners can be notified and arrangements made to replace suspected causal parts before failure. Additional benefits of remote support highlighted by a UK dealer include RDA (Remote Display Access) assisting unfamiliar users with machine set-up. “We are often asked to assist with tractor settings at the point of delivery of a new machine,” explained Thomas Sherriff & Co Ltd – group service manager, Neil Hardie (pictured). “From anywhere with a data connection, we can link to the user’s in-cab display and demonstrate how to make the changes required without visiting the farm. This saves time and cost and, for this year, an extra advantage is not having to work around social distancing restrictions.” FG

1.5m Range: 1.5m 3m & 4.8 to 6m

Stubble management made easy Farmers could benefit from a more cost-effective method of getting a chit this season, according to Remac UK. Business owner Howard advises delaying cultivation until after inspecting the stubble to see if it has been chopped well, and whether there are green patches that need spot spraying. Keep all residue as close to the surface as possible by applying a light roller or using a topper. “The warmth of the soil after harvest, combined with surface residues keeping this environment humid, are ideal for creating the perfect chit,” he says. “Alternatively, a good cover crop putting down roots will pull out excess moisture, and capture any remaining nutrient. Some farmers gain further advantages by grazing covers off with sheep

to do the final clear up before spring sowing. “This is cheaper and more effective in the long run compared with incorporating. Soil structure is important, as good drainage encourages crop competition and at the same time discourages black-grass – this being a weed that thrives in marshy conditions.” The RemacSystem Soil Loosener allows farmers to sow a cover crop at the same time in one pass, then follow up with a roll when conditions are right, so soil starts to benefit from a more aggregated, and drier, load -bearing structure. It can be used just on compacted headlands, if the main parts of the field are in good condition. Remac’s STS packer helps to prevent soil from slumping during winter. FG

with or without seeder

info@remac.org RemacSystem.com

07860 496618

of rts rs pa lie T pp NI su A w R No ity G al qu

AGRICULTURAL ENGINEERS

ISHED VES, A RTS – CONACDERS, etc A P R S E T S E V AR PRE COMBINE HES, SIEVES, CHAFF S IV N K RAPE MODELS ur own L MAKES & facturing o Now manu T Y CONCAVES – ALtails... l HEAVY DUORDER see website fokr /cdeoncaves_user_story.htm O .u T MADE mbinefabrications.co All Enquiries Welcome o d REFURB

71332

NEW an pecialists in

www.c

Hilltop Farm, Danethorpe Hill, Newark, Notts NG24 2PD

01636 702524 07976 696712

sales@combinefabs.co.uk

108 www.farmersguide.co.uk June 2020

106-111 News.indd 108

18/05/2020 09:15


News

Manufacturers’ partnership “a game changer” Two of the most respected and well-known agricultural machinery manufacturers have announced a strategic collaboration for the UK and Ireland. Haith Group, which manufactures vegetable handling equipment, is joining forces with in-field root crop and vegetable machinery specialist Grimme, which is best known for its planting and harvesting innovations, to increase both companies’ respective product offerings. The new relationship is designed to benefit UK and Irish farmers, who will now be able to buy complete solutions from either company’s sales team. The agreement will

see the sales teams of both companies being trained on the other’s product range and will give customers of both companies easy access to their innovative solutions. Grimme customers may, for example, wish to add a Haith SupaWash washer or market leading Rota-Tip box tippler into a Grimme finance and service plan, whereas a Haith customer could take advantage of having a Grimme Cleanloader to work alongside a Haith mobile washer.

“Today’s announcement is a game-changer for UK and Irish farmers,” says Haith sales director Duane Hill (pictured below left). “The strategic collaboration sees two of the biggest manufacturers in the sector coming together to offer the most comprehensive product range available. We’ve never been in competition with Grimme, rather their product range complements ours and makes this arrangement a perfect fit.” Grimme managing director Patrick Graf Grote (pictured above right) adds: “Before now, farmers looking for a complete solution to their needs would have to talk to more than one different company. Now, they can talk to Haith’s team or ours and have access to the full spectrum of root crop and vegetable harvesting and handling machinery. We believe this agreement with Haith Group means we are now able to offer the most comprehensive range of machinery in the UK and Ireland.” Discussions about a closer working relationship began at the

British Potato Industry Event last year, after Duane and Patrick realised that both companies had similar goals and the same desire to give their UK and Irish customers the very best products and service in the potato and vegetable handling sector. Haith and Grimme are now developing plans to tour the partnership around the UK and Ireland with roadshows taking place in the South West, East Midlands and Cheshire, hopefully in the autumn, ahead of a joint presence at Lamma 2021. FG

Graders, washers, tipplers and fillers - trust Haith to handle it. t +44 (0) 1302 831911 e sales@haith.co.uk Haith Advert Templates ART.indd 1

www.haith.co.uk 26/11/2018 13:48

June 2020 www.farmersguide.co.uk 109

106-111 News.indd 109

19/05/2020 16:33


FREE 508 PAGE

- NOR STONEW OP T EN HA RE IN MP G TO SO N ON !

INDUSTRIAL AIR COMPRESSORS

Top quality belt driven air compressors for industrial & commercial users inc; garages, factories, workshops and farms. 10 bar/150psi max FROM ONLY HEADER working pressure £ .00

425EXC.VAT .00 FOOTERINC.VAT 510

£

MODEL

65SUPERSTORES NATIONWIDE

CATALOGUE GET YOUR FREE COPY!

IN-STORE PHONE 0844 880 1265 ONLINE www.machinemart.co.uk

WHERE QUALITY COSTS LESS MIG WELDERS XEV16/100 †V-Twin *230V AIR DISP. MOTOR AIR EXC. INC MODEL cfm (HP) RECEIVER VAT .VAT XEV16/100†* 14 3 100ltr £425.00 £510.00 XEV16/150†* 14 3 150ltr £459.00 £550.80 XEV16/200(OL)†* 14 3 200ltr £525.00 £630.00 XEV16/150(400V)†14 3 150ltr £535.00 £642.00 XE18/200 (OL)* 18 4 200ltr £579.00 £694.80 XET19/200 (OL)* 18 4 200ltr £619.00 £742.80 XEV26/200† 23 5.5 200ltr £739.00 £886.80 XE37/270 (OL)* 36 2x 4 270ltr £1169.00 £1402.80

TURBO AIR COMPRESSORS

Quality machines from Britain’s leading supplier See online for included accessories

.98 89EXC.VAT £ .98 107INC.VAT £

Superb range ideal for DIY, hobby & semi -professional use MODEL MOTOR 8/260 NEW 2HP 7/250 2 HP 11/260 NEW 2.5HP 8/550 NEW 2HP 7/510# 2HP 11/550 NEW 2.5HP 16/550* NEW 3HP 16/1050* NEW 3HP

8/260 *’V’ Twin Pump #Oil free CFM TANK EXC.VAT INC.VAT 7.5 24ltr £89.98 £107.98 7 24ltr £94.99 £113.99 9.5 24ltr £109.98 £131.98 7.5 50ltr £119.98 £143.98 7 50ltr £119.98 £143.98 9.5 50ltr £139.98 £167.98 14.5 50ltr £199.98 £239.98 14.5 100ltr £249.98 £299.98

Great for fast easy hole boring - ideal for fence/ gate posts

FROM ONLY

.00 149EX.VAT £ .80 178INC.VAT £

EXTENSION AUGER PIECES FOR ED160A IN STOCK

MODEL

MAX AUGER EXC. INC.VAT VAT DEPTH / WIDTH CEA150 Electric 560mm / £149.00 £178.80 150mm ED160A Petrol up to 1.6m £349.00 £418.80 / 250mm

FARM JACKS • Min. height: 100mm • Max working height: 1090mm

CFJ48

.99 54EXC.VAT £ .99 65INC.VAT £

BEST

SELLER

18V BRUSHLESS CIR18LIC 1/2" IMPACT 450NM WRENCHES 3 forward and reverse gears

FROM ONLY

.99 114EX.VAT .99 137INC.VAT

£ £

MODEL DESC. CIR18LIC 2x 2.0Ah Li-Ion CIR18LI 2x 4.0Ah Li-Ion

EXC.VAT INC.VAT £114.99 £137.99 £169.98 £203.98

IDEAL ALL-WEATHER PROTECTION

.99 135TE 194EX.VAT .99 233INC.VAT

£ £

MODEL MIN-MAX AMPS EXC.VAT PRO90 24-90 £194.99 110E 30-100 £229.98 135TE Turbo 30-130 £249.98 151TE Turbo 30-150 £289.00 175TECM Turbo 30-170 £449.00 205TE Turbo 30-185 £489.00

WORKSHOP AIR TOOLS

INC.VAT £233.99 £275.98 £299.98 £346.80 £538.80 £586.80

26EXC.VAT .39 FOOTER 32 INC.VAT

64EXC.VAT £ .99 FOOTER 77 INC.VAT

PGF14

BEST

SELLER

HUGE CHOICE IN-STORE/ONLINE

GENERATORS

FROM ONLY

99EX.VAT £ .98 119INC.VAT £

PG3800

.98

Honda engine models available

MODEL G720 G1200 PG2500 PG3800 PG3800DV PG6500DVES

KVA 0.7 1.1 2.2 3 3 5.5

HP 6.5 7 7 13

EXC.VAT INC.VAT £99.98 £119.98 £159.98 £191.98 £179.98 £215.98 £239.98 £287.98 £269.00 £322.80 £499.00 £598.80

DRILL PRESSES

• Range of precision bench & floor presses for enthusiast, engineering & industrial applications B = Bench mounted F CDP152B = Floor standing MOTOR (W) EXC. INC. MODEL SPEEDS VAT VAT CDP5EB 350 / 5 £69.98 £83.98 CDP102B 350 / 5 £79.98 £95.98 FROM ONLY .98 CDP152B 450 / 12 £149.98 £179.98 £69EXC.VAT CDP202B 450 / 16 £189.00 £226.80 £ .98 83 INC.VAT CDP10B 370 / 12 £199.98 £239.98 CDP352F 550 / 16 £229.00 £274.80 CDP452B 550 / 16 £239.00 £286.80 CDP502F 1100 / 12 £569.00 £682.80

5 TONNE FORKLIFT/TRACTOR JACK - CFT5B ONLY

.98 LOW HIGH 169EX.VAT LIFTS LIFTS £ .98 FROM UPTO 203INC.VAT 70mm 730mm £

HUGE RANGE OF JACKS IN STOCK

BRIGHT WHITE LENGTH INTERIOR UP TO 24'

Ideal for use as a garage/workshop Extra tough triple layer weatherproof cover Heavy duty powder coated steel tubing Ratchet tight tensioning

ZIP CLOSE DOOR

£

CAT131

£ HEADER .99

MODEL CIG81015 CIG81020 CIG81216 CIG81220 CIG81224

SIZE (LxWxH) 4.5 x 3 x 2.4M 6.1 x 3 x 2.4M 4.8 x 3.7 x 2.5M 6.1 x 3.7 x 2.5M 7.3 x 3.7 x 2.5M

EXC.VAT £229.00 £279.00 £279.00 £349.00 £419.00

INC.VAT £274.80 £334.80 £334.80 £418.80 £502.80

BC210C

FROM ONLY Ammeter £ .99 Multi-position 64EX.VAT charge regulator £ .99 Overload protection 77INC.VAT on charging cycle MODEL MAX AMPS CHARGE/BOOST EXC.VAT BC130C 15/120 £64.99 BC190 38/180 £94.99 BC210C 25/200 £119.98 BC410E 35/400 £139.98 WBC180 35/180 £139.98 WBC240 45/240 £154.98 BC205N 30/200 £179.98 WBC400 60/350 £199.00 BC520P 50/510 £219.00

MICRO JUMP STARTS

Ideal for starting cars, charging phones, etc.

FROM ONLY

.98 49EX.VAT .98 59INC.VAT

£ £

MODEL

JSM200 JSM300 JSM350

JSM200 START PEAK BOOST BOOST 200A 400A 300A 500A 350A 500A

INC.VAT £77.99 £113.99 £143.98 £167.98 £167.98 £185.98 £215.98 £238.80 £262.80

EXC.VAT £49.98 £64.99 £84.99

INC.VAT £59.98 £77.99 £101.99

INVERTER GENERATORS

IG1200B MODEL IG950B IG1700F IG1200B IG3500F IG2000B IG2200

PLS195A FROM ONLY

FROM ONLY

£ .00 INC.VAT £ .00 229EXC.VAT .80 £142.80 119EXC.VAT £ £ .80 274 INC.VAT £179.98 142INC.VAT PRESSURE ENGINE EXC. INC. £238.80 BAR/PSI HP VAT VAT £190.80 HIGH OUTPUT MODEL £238.80 FANS FOR Tiger1800 110/1595 2.6 £229.00 £274.80 £250.80 FAST COOLING Tiger2600 170/2465 4 £289.00 £346.80 £238.80 *110V Tiger3000 200/2900 6.5 £349.00 £418.80 PLS195A NEW 182/2640 5.5 £439.00 £526.80 JUMP STARTS PLS265A NEW 225/3263 13 £669.00 £802.80 Provides essential home, garage and roadside assistance Integral work light 910 /JS1100C include air compressor DIESEL Long life battery

MODEL SIZE EXC.VAT CAM24 24" £119.00 CAM30 30" £149.98 CAM36 36" £199.00 CAM5002 24" £159.00 CAM6000 30" £199.00 CAM110* 30" £209.00 CAM36 36" £199.00

WASHER

145 Bar

FROM ONLY

.99 64EX.VAT .99 77INC.VAT

2103 psi

£

HARRY HOTWASH Ideal for effective cleaning of vehicles with a hot jet of up to 80°C

£

EXTRA LONG 1m LEADS STARTING MODEL BOOST 900 400 JS1100 500 910 400 JS1100C 500 4000 700 JS12/24 1000 JS12/24Li 600

BATTERY CHARGERS/ ENGINE STARTERS

Delivery & Suction hose in stock

PEAK AMPS 900 1100 900 1100 1500 2000 1200

EXC. VAT £64.99 £69.98 £72.99 £79.98 £139.98 £159.98 £179.98

INC. VAT £77.99 £83.98 £87.59 £95.98 £167.98 £191.98 £215.98

PETROL/DIESEL WATER PUMPS

FROM ONLY

.98 149EXC.VAT .98 179INC.VAT

£ £

†Diesel *Can pump solids up to 15mm dia. #Can pump solids up to DW50 28mm dia. MODEL MAX MAX OUTLET EXC. INC. FLOW HEAD SIZE VAT VAT PW50A 550L/min 30.6m 2" £149.98 £179.98 PW80A 1100L/min 28m 3" £199.00 £238.80 PW3 800L/min 30m 3" £199.98 £239.98 PS75* 750L/min 23m 3" £239.98 £287.98 PF75# 1300L/min 28m 3" £319.00 £382.80 DW50† 450L/min 27m 2" £359.00 £430.80 DW75† 750L/min 30m 3" £439.00 £526.80

• Auto ON/OFF float switch

SUBMERSIBLE WATER PUMPS CAT117

PRICE CUT HEADER

.00 479EXC.VAT £ .80 574 INC.VAT WAS FOOTER £598.80 inc.VAT £

AMAZING INC. CONTAINER FOR DETERGENT LOW PRICE! JET9500

JETSTAR £FROM ONLY .98 PRESSURE £59EX.VAT .98 WASHERS 71INC.VAT

Makes easy work for washing vehicles, patios, stonework, etc. JET7500, 8500 & 9500 210 Bar include hose reel 3045 psi * was £149.99 inc.VAT MODEL MOTOR MAX. PRESSURE EXC.VAT JS1850 1400W 1523psi £59.98 JS1950 1600W 2030psi £89.98 Jet 7500* 1600W 2030psi £119.98 Jet8500 2100W 2610psi £149.98 Jet9500 2400W 3045psi £179.98

INC.VAT £71.98 £107.98 £143.98 £179.98 £215.98

20SPS12 FROM ONLY

£ .99 84EXC.VAT .99 101INC.VAT

£

MODEL CAPACITY EXC.VAT 20SPS12 907kg £84.99 35SPS12 1588kg £129.98 800SS12 3936kg £349.00

INC.VAT UP TO £101.99 7938KG £155.98 CAPACITY £418.80 IN STOCK

PSV1A Produces sine wave & stable power, essential FROM ONLY CON1500RDV £ .98 for computers & 49EXC.VAT sensitive equipment £ .98 ROTARY 59INC.VAT Low noise Fuel HAMMER Efficient Eco Throttle HUGE DRILLS 12V battery charging CHOICE INC. FROM ONLY Powerful heavy duty facility Up to 7 BOOSTER £ .98 SDS professional drill FROM ONLY 39 EXC.VAT hours run time PUMPS IN + £ .98 ideal for trade use £ .98 4 3 STOCK NOW on /4 load 179EXC.VAT 47INC.VAT INC 13MM KEYED DRILL stroke engine £ .98 *Pumps solids up to *was £65.99 inc. VAT 215INC.VAT CHUCK, 2X CHISELS, HSEC650A #was £101.99 inc. VAT 3X SDS+ DRILL BITS & MAX WEIGHT EXC. INC. 30mm diameter #Pumps solids CARRY CASE MODEL POWER CAP OUTPUT KG VAT VAT up to 35mm diameter †Sewage cutter pump (W) (MM) EXC.VAT INC.VAT MODEL MAX FLOW LPM MAX HEAD EXC. VAT INC. VAT 800W 9.3 £179.98 £215.98 £39.98 £47.98 PSV1A* 140 5.8m £49.98 £59.98 CON400RHD 400 10-30 1700W 22 £199.00 £238.80 1100 13-40 £49.98 £59.98 HIPPO 2 (230V) 85 6.0m £54.99 £65.99 CRD1100* 1100W 12.4 £249.98 £299.98 £65.99 £79.19 PVP11A# 258 11.0m £79.98 £95.98 CON1200RD 1200 13-40 3400W 35 £329.00 £394.80 £79.98 £95.98 PSP125B 116 7m £69.98 £83.98 CON720RHD# 720 13-40 1800W 19.4 £329.00 £394.80 £89.98 £107.98 HSEC650A† 290 9.5m £199.98 £239.98 CON1500RDV 1500 13-40 2200W 26.6 £379.00 £454.80

VISIT YOUR LOCAL SUPERSTORE

BARNSLEY Pontefract Rd, Barnsley, S71 1EZ 01226 732297 B’HAM GREAT BARR 4 Birmingham Rd. 0121 358 7977 B’HAM HAY MILLS 1152 Coventry Rd, Hay Mills 0121 7713433 BOLTON 1 Thynne St. BL3 6BD 01204 365799 BRADFORD 105-107 Manningham Lane. BD1 3BN 01274 390962 BRIGHTON 123 Lewes Rd, BN2 3QB 01273 915999 BRISTOL 1-3 Church Rd, Lawrence Hill. BS5 9JJ 0117 935 1060 BURTON UPON TRENT 12a Lichfield St. DE14 3QZ 01283 564 708 CAMBRIDGE 181-183 Histon Road, Cambridge. CB4 3HL 01223 322675 CARDIFF 44-46 City Rd. CF24 3DN 029 2046 5424 CARLISLE 85 London Rd. CA1 2LG 01228 591666 CHELTENHAM 84 Fairview Road. GL52 2EH 01242 514 402 CHESTER 43-45 St. James Street. CH1 3EY 01244 311258 COLCHESTER 4 North Station Rd. CO1 1RE 01206 762831 COVENTRY Bishop St. CV1 1HT 024 7622 4227 CROYDON 423-427 Brighton Rd, Sth Croydon 020 8763 0640 DARLINGTON 214 Northgate. DL1 1RB 01325 380 841 DEAL (KENT) 182-186 High St. CT14 6BQ 01304 373 434 DERBY Derwent St. DE1 2ED 01332 290 931 DONCASTER Wheatley Hall Road 01302 245 999 DUNDEE 24-26 Trades Lane. DD1 3ET 01382 225 140 EDINBURGH 163-171 Piersfield Terrace 0131 659 5919

HEAVY DUTY PETROL POWER WASHERS

CAN DRAW OWN WATER

NEW UP TO 36" IN SIZE

FROM ONLY

V

29944

Honda & Diesel engine models in stock

GAS, TIPS, SHROUDS & WIRE IN STOCK

CHECK FRAME TYPE WHEN ORDERING

ELECTRIC/ PETROL EARTH BORERS

229EXC.VAT .80 FOOTERINC.VAT 274 .00

£

£ HEADER .99

FROM ONLY

GIANT DRUM FANS

GARAGES/WORKSHOPS

FROM ONLY HEADER

£

EXETER 16 Trusham Rd. EX2 8QG 01392 256 744 GATESHEAD 50 Lobley Hill Rd. NE8 4YJ 0191 493 2520 GLASGOW 280 Gt Western Rd. G4 9EJ 0141 332 9231 GLOUCESTER 221A Barton St. GL1 4HY 01452 417 948 GRIMSBY ELLIS WAY, DN32 9BD 01472 354435 HULL 8-10 Holderness Rd. HU9 1EG 01482 223161 ILFORD 746-748 Eastern Ave. IG2 7HU 0208 518 4286 IPSWICH Unit 1 Ipswich Trade Centre, Commercial Road 01473 221253 LEEDS 227-229 Kirkstall Rd. LS4 2AS 0113 231 0400 LEICESTER 69 Melton Rd. LE4 6PN 0116 261 0688 LINCOLN Unit 5. The Pelham Centre. LN5 8HG 01522 543 036 LIVERPOOL 80-88 London Rd. L3 5NF 0151 709 4484 LONDON CATFORD 289/291 Southend Lane SE6 3RS 0208 695 5684 LONDON 6 Kendal Parade, Edmonton N18 020 8803 0861 LONDON 503-507 Lea Bridge Rd. Leyton, E10 020 8558 8284 LUTON Unit 1, 326 Dunstable Rd, Luton LU4 8JS 01582 728 063 MAIDSTONE 57 Upper Stone St. ME15 6HE 01622 769 572 MANCHESTER ALTRINCHAM 71 Manchester Rd. Altrincham 0161 9412 666 MANCHESTER CENTRAL 209 Bury New Road M8 8DU 0161 241 1851 MANCHESTER OPENSHAW Unit 5, Tower Mill, Ashton Old Rd 0161 223 8376 MANSFIELD 169 Chesterfield Rd. South 01623 622160 MIDDLESBROUGH Mandale Triangle, Thornaby 01642 677881

OPEN MON-FRI 8.30-6.00, SAT 8.30-5.30, SUN 10.00-4.00

NORWICH 282a Heigham St. NR2 4LZ NORTHAMPTON 4B, Beckett Retail Park NN5 5JW NOTTINGHAM 211 Lower Parliament St. PETERBOROUGH 417 Lincoln Rd. Millfield PLYMOUTH 58-64 Embankment Rd. PL4 9HY POOLE 137-139 Bournemouth Rd. Parkstone PORTSMOUTH 277-283 Copnor Rd. Copnor PRESTON 53 Blackpool Rd. PR2 6BU SHEFFIELD 453 London Rd. Heeley. S2 4HJ SIDCUP 13 Blackfen Parade, Blackfen Rd SOUTHAMPTON 516-518 Portswood Rd. SOUTHEND 1139-1141 London Rd. Leigh on Sea STOKE-ON-TRENT 382-396 Waterloo Rd. Hanley SUNDERLAND 13-15 Ryhope Rd. Grangetown SWANSEA 7 Samlet Rd. Llansamlet. SA7 9AG SWINDON 21 Victoria Rd. SN1 3AW TWICKENHAM 83-85 Heath Rd.TW1 4AW WARRINGTON Unit 3, Hawley’s Trade Pk. WIGAN 2 Harrison Street, WN5 9AU WOLVERHAMPTON Parkfield Rd. Bilston WORCESTER 48a Upper Tything. WR1 1JZ

01603 766402 01604 267840 0115 956 1811 01733 311770 01752 254050 01202 717913 023 9265 4777 01772 703263 0114 258 0831 0208 3042069 023 8055 7788 01702 483 742 01782 287321 0191 510 8773 01792 792969 01793 491717 020 8892 9117 01925 630 937 01942 323 785 01902 494186 01905 723451

5 EASY WAYS TO BUY... SUPERSTORES NATIONWIDE

ONLINE www.machinemart.co.uk TELESALES 0115 956 5555

CLICK & COLLECT

OVER 10,500 LOCATIONS

CALL & COLLECT AT STORES TODAY

Calls to the catalogue request number above (0844 880 1265) cost 7p per minute plus your telephone company’s network access charge. For security reasons, calls may be monitored. All prices correct at time of going to press. We reserve the right to change products and prices at any time. All offers subject to availability, E&OE. Terms & conditions apply see machinemart.co.uk/finance for more details

29944 (64) FARM (full).indd 1 106-111 News.indd 110

*

07/05/2020 09:21 16:23 18/05/2020


News we can help even just one person at a time of need it will have been worth it.” The company is also supporting the Max Hunter Fund within the Mintridge Foundation. Max, who had a background in agriculture, sadly died by suicide in August last year aged 28. The fund was created to encourage people to acknowledge their feelings and seek help. A fundraising event, 28 NOT OUT, was due to take place over 28 hours from 8pm on 9th July but due to Covid-19 it is likely the event will now involve solo challenges to raise money.

TY OL ER RS

SH e les

VAT

VAT AT

AT 98 98 98 98 98

Y

9

C.VAT

9

C.VAT

G TY K

R

duty l se

RILL S, S&

VAT .98 .98 .19 .98 .98

..

k

T

S

'Spread the Load' campaign to support mental health

To support the campaign directly, you can text SPREADTHELOAD to 70085 to donate £5 – texts cost £5 plus the standard message rate and all donations go directly to the Max Hunter Fund. For more information on Ktwo’s campaign go to: www.ktwo.co.uk/spreadtheload. FG

Manufacturer Ktwo has launched a new campaign, Spread the Load, to raise awareness of mental health in farming and provide support for those who need it. One of the biggest British manufacturers of agricultural muck spreaders and trailers, Ktwo, has launched a campaign to encourage individuals who are feeling overwhelmed to share their feelings and seek help. “There are many pressures in life and the farming industry, and we want to use our platforms to raise awareness and share the support networks available,” explained managing director Robbie Polson. “This is a topic close to many of our hearts and an especially difficult time with the Covid-19 pandemic, so we wanted to launch the campaign as quickly as we could.” To kick off the campaign, Ktwo launched a dedicated page on its website for farmers and their families to find support and advice in difficult times. CEO of the Royal Scottish Agricultural Benevolent Institution, Nina Clancy, who is partnering the campaign, said: “I applaud the Ktwo Spread the Load initiative; the more widely the Farming Help charities are known and what support they can give people in agriculture, the better.” Ktwo plans to further develop the campaign across its networks in the coming months and hopes to run a roadshow across the UK in the future. “We want to do our best with our own networks to help support mental health in agriculture and give people access to the services available to them,” Robbie adds. “If

SPECIALISTS IN SPRAY INSULATION

WEATHERPROOFING

Before...

WARMER IN WINTER COOLER IN SUMMER STRUCTURAL STABILISATION IMPROVES ENERGY COSTS BY HALF CLASS 1 FIRE RATED PRODUCT

Helping Britain’s Farm & Livestock buildings work better.

After...

NATIONWIDE SERVICE Suitable for Storage Units, Warehouses, Stables, Offices and more...

Call now to arrange a FREE survey.

71303

NC. AT 80 80 80 80 80

If we can help even just one person at a time of need it will have been worth it.

RIVA Commercial No9 Office Suite, Epsilon House, Ipswich, Suffolk IP3 9FJ T: 01473 599143 M: 07866 834191 E: mark.mann@rivasurveyors.co.uk June 2020 www.farmersguide.co.uk 111

16:23

106-111 News.indd 111

20/05/2020 09:27


COVENBROOK

Sales Direct

Approved

WE OFFER A WIDE RANGE OF QUALITY BUILT PRODUCTS DELIVERED NATIONWIDE DIRECT TO OUR CUSTOMERS We also undertake all agricultural engineering, fabricating, machining and welding, including reconditioning and modifications to existing machinery, blasting and paintshop facilities. For further information please ring John on 07860 417643

HD Access Platforms from stock

Rigid Hyd Bag Lifters

Fork Carriage

HD Muck Grabs

HD Bale Spikes – available in all sizes

Adaptor Plates

e: covenbrookfabrications@gmail.com • www.covenbrookfabrications.co.uk Mole Drainers (low horse power requirement)

t:

Grain Pushers – available in all lengths

John on 07860 417643

70024

Covenbrook Hall Farm, Stisted, Braintree, Essex CM77 8AJ

112 www.farmersguide.co.uk June 2020

Power on the Land - D&I.indd 112

18/05/2020 12:05


Drainage & Irrigation

Power on the land

Drainage and irrigation is the topic of this month’s Power on the Land, brought to you as always by Mike Williams. The long, wet winter, followed by unusually dry weather in April, has provided a reminder of the importance of water management for farmers, with efficient drainage and irrigation helping to compensate for unpredictable weather patterns. Land drainage is an important part of the Hugh Pearl company’s extensive agricultural activities, which also

include establishing lagoons, lakes and reservoirs for irrigation and amenity purposes as well as land reclamation work following mineral or aggregate extraction. Providing storage capacity for slurry from livestock units is another of their services. They also plan and install new farm water supplies and extend existing systems, and they deal with gas extraction following landfill

activities. Maintaining and improving drainage ditches is also part of the Hugh Pearl land drainage service. The Hugh Pearl company is based in Essex and its services are available over much of the eastern and southeastern counties, backed by more than 65 years of experience. Land drainage provides important benefits, but routine maintenance is essential to keep the system working efficiently. The biggest problem is often a reduction in the flow of water when the pipes are obstructed by a build-up of soil plus plant roots which can be removed by using water jetting to clear the pipes. Lincolnshire-based Fentons of Bourne is the UK distributor for Homburg jetters, available in a threemodel range using piston diaphragm pumps to produce a water jet with a 115-litres/min flow rate. The cleaning water is jetted through each land drain, using a special nozzle on a 300m pipe, and up to 500m pipe length is available as an option.

Fentons of Bourne markets the jetters on a nationwide basis, and Glen Bellamy – the company’s owner – says some of the customers are contractors, but many of their sales are to forwardthinking farmers who understand the importance of keeping their land drains working efficiently. The Austrian-based Bauer company began developing irrigation equipment in 1930, and since then they have produced an impressive list of technical innovations. These have included developing the original lever operated pipe coupling system which first appeared in 1947, their first hosereel system was available in 1970 and in 1999 they offered the Centerliner system with advanced electronic controls to provide fully automatic operation. Bauer’s irrigation equipment includes a comprehensive range of pipes, fittings and couplings as well as application equipment such as booms plus pivot and linear application systems. They also offer one of the largest choices of pump units available with Iveco and John Deere diesel continued over…

P C BROUGHTON DRAINAGE W R Suckling & Sons021557 Land Drainage Specialist

OVER 50 YEARS' EXPERIENCE

LAND DRAINAGE SPECIALISTS 7733ars aken & AGRICULTURAL e: e0r 80 yuenderdt l i b v n CONTRACTORS Mo . for od and ler a ed

IRRIGATION TRENCHING DITCH IMPROVEMENT DITCH ELIMINATION

DRAIN YOUR LAND – NOT YOUR POCKET

Tel: 01754 810332 Mob: 07774 954068

72142

A Homburg drain jetter distributed by Fentons of Bourne.

IMPROVE YOUR CROPS WITH LAND DRAINAGE

Camven Jarley Youngers Lane Burgh Le Marsh Skegness, Lincs PE24 5JQ

72304

Ancient House Chapel Street Steeple Bumpstead Nr Haverhill Suffolk CB9 7DQ

16ess esrtepare a crawugh install 7 0 73 usin s p ith plo ins

h

ep l e T

:

e on

0 mily b hemening wmoleer manancepipe 4 4 01 Fa e sc drai iled wat nte tic s tra und mai pla f h o o r rg Ditc liers de n pp U Su

ag le ain Mo r D

72312

Bulldozer Hire | Specialist Long Reach Equipment Wetlands | Lakes | Ponds | Irrigation Reservoirs | Dredging | Nature Reserves | Piling | Embankment Protection

For All Enquires O1945 860318

GROUP

www.thefengroup.co.uk

An environmental approach to water & land management

Fen Group, Needham Bank, Friday Bridge, Wisbech, Cambridgeshire PE14 0LH

June 2020 www.farmersguide.co.uk 113

Power on the Land - D&I.indd 113

18/05/2020 12:15


Drainage & Irrigation A tractor-mounted lay-flat hose recoiler from the Jones Engineering irrigation equipment range.

…from previous page

engine options. The entry-level pump unit is the DP70 model with a 450-litre fuel tank and either a 60hp Iveco diesel or a 48hp John Deere engine, and the power choices for the range-topping

DP300 model with 600-litre fuel capacity are a 163hp Iveco engine or 166hp for the John Deere version. As well as the irrigation equipment, Bauer also makes other machinery including a range of slurry handling equipment for livestock farms. The equipment list for the mobile pump units made by Yorkshire-based Jones Engineering includes JCB diesel engines and the pumps are from the Caprari range. The specification for all

Land drainage, earthworks, groundworks and construction contractor

FULL LAND DRAINAGE SERVICE

including sportsfields, amenity and irrigation systems using Mastenbroek trenchers

models includes an acoustic canopy to reduce engine noise, levelling jacks provided front and rear, an engine protection system and a telephone link to provide remote control is an option. Pumping equipment operating unattended in remote parts of the farm can be a tempting target for theft, and the drawbar on Jones pumps is detachable to make the pump more difficult to steal. Three-point linkage mounted lay-flat hose recoilers are also included in the irrigation equipment range from Jones Engineering. Hose capacities are up to 1,000m of either 100mm or 125mm hose, and the specification includes a fully galvanised drum with a heavy-duty retraction motor, and road lighting is included. A special feature on the newest addition to the recoiler range is a drum that is easily removable. The Euromacchine range is a recent arrival in the UK, but the company has been making irrigation equipment in Italy for 40 years, with a long list of export markets including most of mainland Europe. A special feature of the range is the comprehensive list of diesel-powered pump units with

Caprari, Cornell and Rovatti pump options providing flow rates from 20–600mc/hr and powered by Iveco, John Deere and Deutz engines with outputs from 31–250hp. There is also a smaller capacity pump series suitable for special applications including the amenity and horticultural sectors, and these have Lombardini engines in the 7.5–40hp range. Ed Whitehead, who is establishing Euromacchine products in the UK, says the pump units include a number of innovative features such as the patented Supertank Primer to cool the engine, avoiding the need for a radiator and offering reduced noise and fuel consumption levels. Another product in the Euromacchine range is the Riverscreen filter that prevents suction filter blockages while also protecting the fish population. FG

Euromacchine pump unit with a 100hp Iveco engine, Caprari pump, Supertank Primer and remote control via texting.

For all enquiries call Harvey on 01233 860404 or 07770 867625 www.fgspilcher.co.uk

Hugh Pearl Land Drainage

BUY BRITISH MANUFACTURED IRRIGATORS

72152

with 60 years experience of contracting can supply all your drainage and trenching requirements from design to construction

ALL PUMPS UNITS USE: FUEL EFFICIENT JCB ENGINES. CAPRARI CENTRIFUGAL MULTI-STAGE PUMPS.

Hugh Pearl (Land Drainage) Ltd New Farm, Bobbingworth, Ongar, Essex CM5 0DJ

01277 890274 Fax: 01277 890322

ALL IRRIGATORS ARE: OPERATOR FRIENDLY AND COME WITH A 2 YEAR WARRANTY

New design re-coiler with removable drums 93 AKEFERRY ROAD. WESTWOODSIDE. DONCASTER. DN9 2DX . TEL: 01427 752171 FAX: 01427 753673 E-MAIL: sales@jonesengineering.co.uk

www.hughpearl.co.uk

114 www.farmersguide.co.uk June 2020

Power on the Land - D&I.indd 114

18/05/2020 12:20


INNOVATIVE WATER PUMPING SOLUTIONS

Reducing the risk of flooding, land drainage and irrigation issues, together with livestock water supply concerns

SUPER TANK Priming System

Water supply cut off! – Is there a contingency plan such as storage and a pumping system? These are common everyday issues for the farming community

Stuart Pumps are here to help you With the majority pumps and ancillary plant readily available from stock we are in an ideal position to fulfil your needs either planned or during an emergency

NO RADIATOR Pump Unit

Benefits

• Large range of both new and used pumps including self-priming, borehole, fully submersible • Option of power source such as diesel/petrol/electric • Over 35 years experience serving the farming community and the water industry • Very competitive prices • Most pumps and ancillary plant available ex stock • Options for sale or rental • Maintenance service agreements available • Technical and spares support available

SELF CLEANING FILTER

72173

on-line: www.stuartgroup.ltd.uk/pumps email: pumpsales@stuartgroup.info • For further info call 01953 458988

Mail us: e.whitehead@euromacchine.com Call us: 07934 720239 – www.euromacchine.com

SWA

SW ATTWOOD & PARTNERS

S W ATTWOOD & PARTNERS LAND DRAINAGE

• FIELD MAPPING • DRAINAGE SURVEYING • DESIGN • DRAINAGE FOR FURTHER INFORMATION PLEASE CONTACT JAMES OR VISIT OUR WEBSITE James: 01795 880441 or 07884 664035 email: james@swattwood.com 72132

www.swjfattwood.com June 2020 www.farmersguide.co.uk 115

Power on the Land - D&I.indd 115

18/05/2020 12:22


Drainage & Irrigation A loyal customer base for 30 years Sean Jackman Agricultural Services offers a full land drainage and ditching service, and prides itself on its loyal customer base – many of whom have been with the company since it first opened its doors. The company, which is based in Dunton, Buckinghamshire, was started 30 years ago by Sean Jackman himself in his late teens. Beginning as a muck-spreading

business, it now offers a full range of drainage and ditching services – foul and waste; surface; concrete laying; pipework/twin wall, and ducting. After the severe flooding in autumn and winter last year, drainage will be the company’s main job for the next three months. Sean Jackman works on small-scale drainage, carrying out those jobs that are too small or too expensive for the larger companies to take on. Business manager Matt Wright says that, while there is currently a lot more demand for drainage work coming in from farmers, first they will be trying to get on top of ditching to make sure they are running free – as it may not then be necessary to put in so many drains. Throughout the year, the company will work with its loyal existing customers as well as taking on new work, first spreading their muck then carrying out any additional work needed, from putting track in or concreting, to ditching and drainage. FG

New control systems for engine pump sets Manufacturer Greencrop has studied ways to use water more efficiently in order to develop a new range of control systems for its engine pump sets. Changes introduced include a digital electronic protection and pulse flow control to monitor low, no flow and high flow shutdown if a pipe bursts. The GSM panel, as well as text starting and stopping, will give information on m3/hr used per run, while the target pressure can be also be adjusted between 2.5–6 bar in 0.5 bar increments. On start-up, the engine revs up to approximately 1,500rpm to help lift non-return valve then idle back once satisfactory flow rate is achieved for line fill.

If panels shut down on fault, all previous settings are retained when the panel is recycled. In the event of pump shut down, the operator can attempt to restart without having to return to the panel three times before locking out, requiring a reset. Greencrop also introduced the new super-fast electric pressure side vacuum primer. The Iveco 4-cylinder 125hp turbo engine unit has proved to be a very good choice with good engine torque and fuel efficiency, Greencrop says. The latest Elite ranges, the 730 and 735 series, offer hose diameters from 100–140mm and hose length options up to 580m long, while the newest range, Elite 800, is now available with hose lengths up to 800m. FG

72252

Sean Jackman AGRICULTURAL SERVICES

land drainage & ditching Concrete Crushing Concrete Laying Pipework / Twin Wall Manure Spreading Sean Jackman North Farm House, Littlecote, Dunton, Bucks MK18 3LN t: 07971 952015 or 07770 991150 e: seanmavbobcat@gmail.com 116 www.farmersguide.co.uk June 2020

116-119 Drainage and Irrigation.indd 116

15/05/2020 14:12


Reservoir project aids major grower The Fen Group recently took on a project to reduce water charges for a Lincolnshire grower who supplies two major supermarket chains. The business had increased output in terms of plants for the second year running, expanding the new-style polytunnel with vented sides, joining several single spans together to form 10 acres of growing capacity. This created two problems – water required for irrigation and what to do with the water running off 10 acres of roofing. Fen installed a network of underground pipe work to get the water off the roof direct from large gullies in large quantities. This was fed into 600mm pipes across the back of the building; the water then flowed by gravity direct into one of three

reservoirs joined together. Each of the reservoirs was controlled by penstocks to enable the water to be recycled back to the greenhouses during the main growing season. This has subsequently had a dramatic effect on the cost of irrigation to the unit. The construction was not an easy build, Fen says, as the material was largely sand-based and ground water was relatively high. Calculating the correct levels to reduce the need for pumping was a challenge, but successful. The field drainage was removed from the site and a key trench formed, compaction of both the key trench and the bunds during construction played an important element of the build. FG

Helping you plan ahead Covid-19 has given us a salutary lesson in the structure of supply chains – even for toilet rolls – but the weather has always challenged farmers to plan ahead for extreme conditions, says irrigation equipment manufacturer Briggs Irrigation. The virus and the weather may now conspire to make delivery of some farm supplies and machinery less predictable, but Briggs says it is always ready to work with growers to help them plan ahead. Managing director Adrian Colwill comments: “Our factory in Corby has continued to operate over the last few months and we still have stocks of pumps, hosereels and hosereel mounted

booms. But with such a long, dry spring, demand has been very strong – both in the UK and for our export trade. Orders for some models therefore stretch well into the summer. “Over the last few years we seem to be experiencing this type of more extreme weather and we are always happy to assist farmers in forward planning so they can be fully prepared, even if they are not ready to place an order.” From the outset of Covid-19 restrictions, the company changed its processes to ensure adequate social distancing within its offices and across production lines. Delivery procedures have also been modified to protect customers. FG

Aluminium Fittings & Parts

the perfect fit for irrigation solutions

Wright Rain UK 2018, a quality name, providing a quality product. We are now based in Doncaster, ideally placed to serve our dealers across the whole of the UK with our full range of aluminium pipes, fittings and parts available from stock. Our new catalogue is now available which will make it easier for users and dealers to view what we offer and select the items needed. Contact John or Chris for your local Wright Rain dealer and a copy of our new brochure

WATER WHEN & HOW YOUR CROPS NEED IT •

Booms for lane widths 10 - 96 metres

Exactly the right hosereel for your farm

Advanced, JCB-engined, silenced pumpsets

Systems for dirty water and digestate

Raindancer remote monitoring and control

Water-saving tied ridger

Fixtures, fittings, pipework and more... visit our website: briggsirrigation.co.uk call us on 01536 260338 or email: enquiries@briggsirrigation.co.uk

Wright Rain UK 2018 Bawtry Road, Tickhill Doncaster DN11 9EX

Tel: +44 (0)1302 756000

June 2020 www.farmersguide.co.uk 117

116-119 Drainage and Irrigation.indd 117

15/05/2020 14:14


Growers urged to plan ahead for investments

New building division from water services company Philip Millington Water Services Ltd has built three new pump sheds over the past few months since introducing a new Millington building division, with work carried out by Simon Millington Builders. The pump sheds are made from 4in concrete blocks with PVC double-access doors, PVC fascia/guttering and batten/ felt tiled roof. These are completely maintenance-free and work out cheaper than a steel building, the company says. It has been another busy year for the business, installing underground irrigation mains and reservoirs as well as pump sheds. Grant-aided work is now slowly coming to an end, so Philip Millington Water says it needs to keep its five excavators and

Mastenbroek trencher busy. When considering your next project, the company says to bear in mind that it varies out its own thrust bores up to 8in in diameter and 14m in length, while its staff hold the Streetwork certificates which must be present when carrying out these works. All of its fittings are made from 5mm steel and then hot-dipped galvanised – even the pipework in the pump sheds is fabricated on site, dismantled and then hotdipped galvanised. With the season already upon us, Philip Millington Water reminds farmers that it is the local Briggs Irrigation agents and keeps large quantities of spares in its Catfield workshop near Great Yarmouth. FG

Those looking to invest in new irrigators for next year should start making plans over the next couple of months, according to Bauer. With high demand across Europe and further afield, plus just-in-time manufacturing and assembly processes, the order season for Bauer irrigators now typically ends in October. Thanks to special measures and Bauer’s status as a supplier of essential equipment to farmers, its factory in Voitsberg, Austria, has continued to operate despite coronavirus. “There has been no discernible effect on deliveries of new Rainstar irrigation reels or replacement parts,” says Bauer UK & Ireland sales manager, Adrian Tindall. “Here in the UK we’ve been in lockdown, of course, except for making

emergency repairs to essential equipment in support of our dealers and their customers.” Bauer’s latest machines are operated through cuttingedge electronic control and monitoring systems, including the Ecostar 4300 and 6000 on-board controllers, and Bauer’s SmartRain online irrigation management system, which provides immediate access to the progress of irrigation sessions on an office computer or the app. “One of the key benefits of SmartRain is that reel moves can be anticipated, scheduled and handled in a timely manner, and alerts received if any problems arise,” notes Adrian. “Remedial action can then be taken promptly to minimise downtime and disruption to irrigation schedules.” FG

Bauer Rainstar irrigation reels ready to be deployed.

Mobile irrigation management system

• Land Drainage • Pumps - Diesel or Electric • Ditching • Underground mains laid using our trencher • Drain Jetting • Tracked excavators or wheeled digger • Design of complete irrigation systems • Thrust boring with our own certified staff • Reservoirs • Briggs Irrigation agents • Boreholes • Mini digger for fast response to burst mains • Irrigator and pump repairs - any make • Aluminium pipes and fittings

• • • • • •

Monitoring of Rainstar operation Optimize your irrigation management Automatic Error messages Irrigation control via mobile devices Team management Automatic reports

72296

Contact Richard on 07787 552384

Based at Catfield, near Stalham

www.millingtonwater.co.uk 118 www.farmersguide.co.uk June 2020

116-119 Drainage and Irrigation.indd 118

Röhren- und Pumpenwerk BAUER Ges.m.b.H. 8570 Voitsberg, Austria +43 3142 200-0, sales@bauer-at.com, www.bauer-at.com

BAU_016_05 IN SmartRain 93x133.indd 1

02.05.16 08:30

15/05/2020 14:18


crops to thrive, not only in the wet but also tolerating dry spells better. Drainage by its very nature is long term, with correctly designed and installed schemes expected to last 50 years or more. Improvements to soil structure and health are felt immediately when the land drains start to work. Allan Collyer is a family-owned and run business operating from a base near Bungay in Suffolk. It operates mainly in Norfolk, Suffolk and Essex. For advice on land drainage or water storage, contact the company now. FG

With an exceptionally wet finish to 2019 and the equally wet start to 2020, some crops either didn’t get drilled or suffered from being waterlogged for long periods of time. This is especially prevalent on land with poor drainage and, although we have had a dry spring which has enabled field work to catch up, some of the winter crops are now suffering from poor root structure and drought stress, notes land drainage contractor Allan Collyer & Sons Ltd. Good drainage allows for earlier entry onto the land and promotes good root structure, encouraging

ALLAN COLLYER & SONS LTD land drainage contractors

An excellent year for mole draining After two poor moling seasons and six months’ wet weather, 2020 is a ‘catch up’ year for mole draining, says Hankins Engineering Ltd. Ideally, it should be done in clay soils when the ground is drying out but moist enough at depth to form and maintain the mole. The aim is to run excess water above a pipe drainage system, back-filled with gravel or into an open ditch. It is important to check the depth of the drainage system before moling by digging down and/or checking the drainage maps. Moling will enhance the effectiveness of a land drainage system in a wet or dry season by helping to improve soil structure and crop yield. Well-drained

soils will aid root development and root depth. In poorer crops, consider moling in the crop while conditions are good to save time later. It could be an ideal time to take advantage of the current lower fuel price. Hankins manufactures the Maidwell Moler, which is available in single, twin and three leg models; mounted or trailed; for purchase or hire, and a contract moling service is also available. Maidwell Molers are a robustly built beam construction with high ground clearance and unique screw-adjusting double ended leg, incorporating a shear bolt device, which acts as a safety mechanism. They will withstand the largest tractors and crawlers on the market, Hankins says. FG

MAIDWELL MOLERS Benefit from improved soil structure, better drainage and higher yields

gned Desi ilt by & bu Specialists in contract moling & hire

Hankins Engineering

STRONGEST & BEST MOLERS

Draining Norfolk & Suffolk for 40 years

Precision farming requires precision drainage (with RTK GPS mapping and machine control)

Cost effective land drainage

71311

Poor drainage causes some winter crops to suffer

Drainage & Irrigation

Most modern equipment

Excavations & precision levelling

Contact Chris or Colin 01986 781404 High Street, Ilketshall St Margaret, Bungay, Suffolk NR35 1NA

www.collyerdrainage.co.uk 72087

✔ Profit from our 30 plus years of experience and join 100's of satisfied users over 1000's of acres ✔ Robustly built with a unique pitch adjuster, incorporating a shearbolt for leg protection ✔ Well proven design built to withstand large tractors and crawlers ✔ Copes extremely well in trashy conditions due to large swivelling disc ✔ Single, twin and three leg machines available, mounted and trailed ✔ Spares for most molers and subsoilers at competitive prices Contact Ron Hankins ✔ Discounts for winter orders telephone 01604 686216

for further information

mobile 07973 265378

www.maidwellmoler.co.uk

June 2020 www.farmersguide.co.uk 119

116-119 Drainage and Irrigation.indd 119

20/05/2020 09:28


After 100 years we still remain #ImpressiveInTheField

Call 01506 894822 for all your seed requirements enquiries@oliver-seeds.co.uk 120-125 Livestock.indd 120

www.oliver-seeds.co.uk 19/05/2020 09:08


Livestock

Grass reseeding in Devon.

Maximising returns from autumn reseeds With forage stocks low this year after the long, wet winter, it could be the ideal time to boost grassland productivity by putting in a new reseed. Sara Gregson investigates. Less than three per cent of UK grassland is reseeded, which means many farmers are missing out on the higher yields and better nutritional qualities of new grass varieties introduced by grass breeding companies every year. And it is not as if sward composition remains static. In fact, feed quality in fields is an evermoving feast and declines over time. Ten years after reseeding with a 100 per cent perennial ryegrass mixture, just 25 per cent of the sown species may remain. The rest will be made up of much poorer performing weed grasses. Trials in Ireland have shown that 100 per cent perennial ryegrass swards grew 2.7t DM/ha more grass than a 15 per cent perennial ryegrass sward and gave a far better return on nitrogen applications. Most of the difference occurs in the spring up to mid-May. With regular reseeding the grass growth capacity of a farm can be increased significantly and the annual return on investment can be large – as much as £500/ha/year over five years, in terms of increased cow performance.

Reseeding can:

• Increase the overall productivity • • • • • •

of the farm Increase carrying capacity Allow higher animal output Increase grass quality Increase response to fertiliser Increase grass utilisation Introduce new, better performing grass and clovers.

From Pocket Manual for Reseeding, Moorepark.

k

Operation

Reseeding £/ha

Desiccation (inc. application)

Overseeding/Renovation £/ha

36.00

Weed control (pre-seeding) Plough

50.00 75.00

Furrow press

6.90

One-pass tillage

61.00

Ring rolling (2 passes)

26.00

Grass harrowing (2 passes)

42.00

Grass seed with harrow

30.90

Ring rolling (1 pass)

13.00

30.90 19.80

Seed cost

155.00

100.00

Fertiliser (20:10:10) 300kg/ha £230/t blend

69.00

Fertiliser (0:20:30) 125kg/ha £260/t

32.50

Lime (2t inc. application) (£27/t D&S)

67.00

Slug pellets (inc. application)

27.00

27.00

566.80

369.20

Total £/ha

67.00

Table 1: Costs of a full grassland reseed compared to overseeding. Costs from January 2020.

Time of sowing

First steps

Reseeding in England and Wales tends to be carried out in autumn as this is a more reliable time of year for weather. On the Oliver Seeds trials farm near Cheltenham, 30-year rainfall measurements show August to be the wettest month and warm, moist soils are the most conducive to rapid grass establishment. The ley then has the chance to bed in through winter and is ready for rapid growth the following spring. A spring reseed can also be successful, but all grasses apart from westerwolds need a winter to vernalise. “Reseeding needs careful planning,” says John Harris, a BASIS-registered seed adviser with Oliver Seeds (pictured overleaf ). “At £369/ha for overseeding and up to more than £566/ha for a full reseed, farmers should regard this as an investment for the future, rather than just as an added cost. This could be anything from a one year in five to a one year in 10 operation, so it is worth getting it right.” (See Table 1)

John Harris suggests that grassland farmers should be renewing up to 20 per cent of their farmed land each year. “The first step is to decide which field needs reseeding. Ideally these should be the lowest performing fields. Farmers who regularly measure their grass will know which are the worst. Counting the number of silage trailers coming from each field can also act as a rough guide to the tonnages being grown. “If a farmer does not have these figures, he should walk the fields regularly to assess how many sown species are still growing and the level of broad-leaved weed infestations. Are there any compaction or drainage issues that need rectifying before reseeding? “Taking a soil test is essential and applying P and K to bring the soil index up to 3 if needed. The minimum pH is 6.5. If it is lower than this, lime should be added.” continued over…

June 2020 www.farmersguide.co.uk 121

120-125 Livestock.indd 121

20/05/2020 09:00


Livestock  Sowing grass seed in Wales.

Cultivation choice will depend on soil type and structure and machinery availability. Crucially, a fine, firm and level seedbed is required as grass and clover seeds are very small. Rolling once before sowing is advisable as it stops seeds going too deep. Rolling two more times post sowing will ensure good soil-to-seed contact.

Farmers should challenge their seed adviser to provide a mixture for the specific field and make sure the varieties are on the Recommended Grass and Clover List.

…from previous page

Mr Harris continues: “The next step is to decide precisely what the new ley will be for. Will it be grazed or conserved or both? What is the soil type and rainfall and what is the fertiliser regime? “Farmers should challenge their seed adviser to provide a mixture for the specific field and make sure the varieties are on the Recommended Grass and Clover List. For example, Oliver Seeds has a wide range of mixtures, from Tornado – a catch crop

ryegrass for cutting or grazing producing 21t DM/ha; to Megabite – a high-quality grazing mixture for intensive cattle grazing systems; to Landmark Extreme – a highly productive and persistent mixture for cutting and grazing on adverse sites.”

Preparation and sowing The target turnaround in which to get a reseed back into production should be 60 days. This time out can be minimised by cultivating 7–10 days after spraying off the old grass.

“Keep a close eye on the field as the grass seed germinates and check for slugs and broad-leaved weed seedlings. It is much more cost effective to spray baby docks and thistles in the autumn, than waiting until the spring when they will be more established. A light grazing before winter will encourage tillering and a denser sward. “Do not ignore a young reseed; continue to monitor performance and ensure nutrients are in balance and weeds controlled for best and long-lasting results.” FG

Award Winning Residue Management

VERSATILE HIGH SPECIFICATION • CUT SLUG HABITATS AND ACTIVITY • PREPARE STALE SEEDBEDS PRE-DRILLING • REINVIGORATE GRASSLAND T: +44 (0)1905 347347 E: info@razorbackuk.com W: www.razorbackuk.com

122 www.farmersguide.co.uk June 2020

120-125 Livestock.indd 122

19/05/2020 09:18


POWERSWING POST DRIVERS

72385

WRAG

PROTECH MACHINERY

EVO1 120o slew extending track

Flexibility, Versatility Second to None

Centre post frame

MAXIMUM HEIGHT =

Perfect for Deer Fencing MAXIMUM IMPACT including the strainers !

Wire unroller with drop down hinge

Front post frame • 300kg hammer • 75mm dia rock spike and extractor kit • 1m tele mast extension, max working height under cap 3950mm • 500mm sideshift • 2 way mast tilt • Transport position • 48hp Yanmar engine • Poclain transmission • Hydraulic mast leg • 1.6m outside track width • 400mm wide tracks • 500mm track extn so 2.1m outside track width • Foot stand and tow bar • 60 or 120 deg slew

tow bar

• Ignition • High & low speed tracking • Full rear controls • Electric throttle switch • Servo tracking controls OTHER FEATURES INCLUDE... • Post driver controls • Lowered rear idler for increased contact area, • Park brake and emergency cut off sealed bearings in all undercarriage running gear • Auger drive with auto drill function • Wire unroller with drop down hinge for easier loading of larger rolls • Auger sizes up to 250mm dia

Telephone: WRAG 01889 590275 Email: sales@wrag.co.uk BvL 2020 half page .qxp_LayoutWeb: 1 04/05/2020 11:23 Page 1 www.wrag.co.uk

FOR PROTECH SALES PLEASE CALL

Andrew 07971 079751•Steve 07974 956716 PROTECH MACHINERY LTD

Vis it o fu ur w ll p e rod bsi uc te t tr os an ee ge ou r

A Model to Suit Every Application

Woolridge Farm, Gloucester Road, Hartpury, Gloucestershire GL19 3BG British Built at Unbeatable Prices

e-mail: sales@protechmachinery.co.uk www.protechmachinery.co.uk

72239

Quality mixer ... Quality mix ... Quality assured

BvL - German engineering at its best. Capacities from 5m3 up to 46m3 with a wide range of specifications and options, including unique options to suit all your livestock TMR needs. North: Paul McUrich - 07810 040100 / paulmcurich@gmail.com South: John Molton - 07947 719985 / john.molton@bvl-group.de www.bvl-group.de 120-125 Livestock.indd 123

40 years of Vmix development 19/05/2020 09:24


 BvL's V-Mix series covers a wide range.

Mix consistency ‘the key to feed performance’ Consistency is the key to a good ration mix, and manufacturer BvL believes this is the main reason it has seen a considerable increase in demonstrations and sales of its high capacity twin and triple auger mixers over the past year. integral hydraulic clutch. This allows the V-Mix to be started in a low gear and for PTO speed to be increased under load up to full mixing speed, so reducing strain on the complete drive train. Options include features such as doors on both the left- and righthand side of the feeder for feeding flexibility and even simultaneous discharge to both sides. Additional discharge door options are available, as is a discharge conveyor.

BvL’s V-Mix series of diet feeders covers a wide range of machines, available in single, twin and triple augers variants, and in capacity from 3.5m3 up to 46m3. Large diet feeders can be particularly hard on tractor drive trains, especially when starting and during the early stages of the mix. To reduce load on the tractor and make the V-Mix easier to drive, BvL offers a Powershift gearbox which incorporates a reduction gear with

Complete

All machines are also suitable for Compact TMR, which is attracting considerable interest due to its milk yield benefits. Compact TMR involves the soaking and pre-mixing of the dry components of the ration with water. This is then left to soak overnight after which the rest of the ration mix is then added. The benefit of this is that it makes it impossible for the dry components of the forage to be separated out from the rest of the

mix, either during the feeding out process or by the cow pre-sorting. As a result, every cow is fed a far more consistent ration, resulting in a yield improvement of up to 2 litres per cow, in addition to potential improvements in milk quality. In place of the standard mixing augers, the Compact TMR augers fitted in the mixer are not as tall, but are wider and have extended mixing blades, plus an additional auger blade for more intensive mixing. The mixing augers are made using a V2A rust-proof stainless-steel surfacing for durability. Due to the need to leave the wet mix in the mixer overnight and the extended mixing time, to protect the mixer body this is also faced with V2A rustproof stainless-steel and the augers are fitted with a seal to avoid water ingress to the inside of the auger cone. Unique to BvL is the availability of special coatings and hardened components for use with more abrasive, higher dry matter rations, making this option particularly suited for beef cattle rations and large dairy herds. FG

40

YEARS EXPERIENCE

Grasscare

IN GRASSCARE

• EXTENSIVE RANGE

In-line or fully offset, belt or shaft driven - we have a topper for your horticultural or agricultural application.

CAPACITY UP TO

1350 LTR DYNAMO UP TO

12M

INTER-ROW MOWER MEDIUM DUTY - EKR

THE LAND

XPRO

NEW Hydraulic Side Shift Front or Rear Mounted

3cm diam. cut

Front or Rear Mounted

CALL OUR SALES DESK: 01872 560592

8cm diam. cut

Auto Belt Tensioning System

WWW.TEAGLE.CO.UK

10cm diam. cut

Front & Rear Mounted

#KEEPINGFARMERSFARMING

124 www.farmersguide.co.uk June 2020

120-125 Livestock.indd 124

20/05/2020 09:29


Livestock

New seed treatment gives brassicas a flying start Start-uP seed treatment offers increased vigour and early rooting in brassica crops, according to a Limagrain trial on forage rape and kale hybrid brassicas, and stubble turnip crops. Limagrain has introduced a new seed treatment for brassicas that promotes early growth and even establishment. Rich in soluble nutrients and bioactive compounds, Start-uP, which is manufactured by British-based company Ilex Envirosciences, can achieve increased vigour and early rooting in brassica crops. It includes phosphite, the highly mobile form of phosphorus that can be transported through the plant much faster than conventional fertiliser phosphate. It also contains a package of essential amino acids and natural compounds from seaweed that are readily taken up by the young roots. Limagrain has trialled Start-uP on forage rape and kale hybrid brassicas and stubble turnip crops at its site in Lincolnshire during six weeks in spring 2019.

“We found an increase in leaf length of 9.8 per cent, and 28.6 per cent on root length, on crops grown from seed treated with Start-uP compared with the control,” says Limagrain’s forage crop director Martin Titley. “And, in the six-week period, root mass was 5.9 per cent more in the Start-uP treated crop, indicating that this seed treatment offered crops a significant growth advantage in the early stages.” Forage rape, kale, stubble turnips and brassica hybrids are sown between May and August and provide a high feed value forage for cattle and sheep in just 12–14 weeks. “Treating seed with Start-uP gives growers an insurance at the crop’s most vulnerable time,” adds Mr Titley. “This helps to guarantee a high yielding fresh forage with good feed value.”

 Beef cattle grazing Bombardier kale.

Brassicas and stubble turnips are increasingly popular as a break crop, sown after first-cut silage as part of the grass ley rotation or after cereal harvest. This flexibility, their low growing costs and their fast growth bring benefits to mixed and livestock farming systems. “During the past few years many of the effective seed treatments have lost their registration and there are very few alternatives available,” Mr Titley explains. “Start-uP has proven to be a highly effective option for these crops.” FG

Interval rape kale hybrid: (right) treated with Start-uP; (left) untrea ted, control.

NO FIREARMS PERMIT REQUIRED SUITABLE FOR FARM ANIMALS OF ALL SIZES

01635 253344 sales@raytradeuk.co.uk www.raytradeuk.co.uk

71279

Tackling a difficult shearing season

As the coronavirus pandemic prevents overseas shearers coming to the UK, the National Association of Agricultural Contractors (NAAC) is warning of a longer, harder season ahead. It will also be vitally important for farmers and contractors to take steps to ensure social distancing is observed during shearing, to protect themselves and shearers who will be travelling from farm to farm. Farmers are advised to contact their usual shearer to work out the logistics this year. As UK shearers step up to the plate, the NAAC has launched a matchmaking service to help link up shearing

contractors and shearers. It has also led the development of social distancing guidelines for farmers and contractors to ensure shearing is done safely. NAAC technical consultant Jill Hewitt says we are likely to be significantly down on shearers this year, though at the time of writing it is said to be legal for shearers to travel to the UK without quarantine, and there is news of flights becoming available. Nevertheless, the shortage of skilled workers is likely to present a challenge for the industry. Jill advises farmers to ensure sheep are ready and wellpresented when they know shearers are due to arrive, to limit the amount of time they spend on the farm. Both the matchmaking service and the coronavirus checklist can be found at www.naac.co.uk. FG

•AGRICULTURAL • LIVESTOCK • EQUINE NE EQUIPMENT & ACCESSORIES

Tel

01277 356881 Address

Whitesbridge Farm m Margaretting Ingatestone Essex CM4 9JT Opening Times

Mon–Fri m 8:30am–5pm Sat m 8:30am–1pm

We are suppliers of

Shearwell Tags

Animal Health Products Ear-Tags • Electric Fencing Wooden & Galvanised Gates Stock Fencing • Barbed Wire & Posts Drinking Troughs • Pipe Fittings Clothing & Footwear ys Kids Farm Toys

di@dissupplies.co.uk li k

www.dissupplies.co.uk di li k

www.facebook.com/dissupplies/ 72353

June 2020 www.farmersguide.co.uk 125

120-125 Livestock.indd 125

19/05/2020 09:26


All operations carried out with GPS

Phone Edward to discuss

07767 167821 Covering Halesworth and surrounding areas

John H. Howlett ■ Full farm contracts ■ 24m spraying & 24m fertiliser spreading ■ Muck, Limex 45 & 70 and lime spreading ■ Set aside topping ■ Combining and all cultivations

Grassland Services Arable Services Hay, Straw and Haylage Bought and Sold

07811 125312

Agricultural Contractor

360º Digger work Specialising in Ditching & Coppicing (shear & grab) Cuts & holds 14” diameter wood

• ash and poplar dismantling and purchase • hedge and woodland coppicing • site clearance • felling licence applications • contract chipping • supplier of dried and screened woodchip

m: 07850 988808 e: info@collinsfarmingandforestry.co.uk w: www.collinsfarmingandforestry.co.uk

T. G. ASKEW

South Essex based

Hedge Cutting

Contact Peter 07944 272 762

peterbowers6@gmail.com

72360

Hill Farm, Wissett, Halesworth

Bale Wrapping – round or square

Don’t let timber quality deteriorate Safely harvest while it has value!

71386

Andrew 07860 262196

Hay and Haylage Making – 80x47cm 'Euro' baler

P. BOWERS

TURN POPLAR & ASH INTO CASH

Agricultural Contractor

Agricultural Contractors & Forage Merchants

71955

Services Ltd

www.greencropforage.co.uk

• 12/24m spraying and Liquid fertiliser application • Claydon drilling • Claydon Terrastar (also for hire) • Grassland operations/paddock maintenance • Tractor/Telehandler with operator

71383

A.E. Kiddy & Son

Collins Farming & Forestry

71380

71389

Sibton Abbey Contracting www.sibtonabbeycontracting.co.uk T: 07500 010510 Wood Farm, Sibton, Suffolk, IP17 2ND

Brundish Road, Wilby, Eye, Suffolk IP21 5LR

www.tgaskew.co.uk

• Biomass chipping G30 & G50 • Excavator mounted tree shearing • Tree & hedge coppicing • Pond dredging • General digger work & ditching

• Fixed tooth forestry mulching • Site clearance • Felling & extraction • Woodland management

Bulk Haulage • Aggregate • Road Planings Stock Feed • Equestrian Rubber Chip & Silica Sand, Bark & Energy Chip • Farm Track Repairs For further information please contact us on Tel: 01379 388156 • Fax: 01379 388109 Email: chris@tgaskew.co.uk 71378

Specialist Agricultural Spraying Contractor

FOR ALL YOUR SPRAYING REQUIREMENTS

BASED NEAR RIPON, NORTH YORKSHIRE

With over 35 years experience in both farming and the use of machinery, we can provide the best agricultural contracting services at competitive prices. ALL AGRICULTURAL WORKS UNDERTAKEN

Suspension Fertiliser & Avadex application available now

SPRING SPECIALS

Fertiliser Spreading • Silaging • Baling • Topping • Grass Mowing • Bale Wrapping E: adrianmrr@aol.com/chris.adrianmorrisonandson@yahoo.co.uk T: Adrian 07778 912088/Chris 07917 114767

www.adrianmorrison.co.uk

71872

To discuss the above please contact

Philip Clarke 01728 688360 or 07850 710996 or e-mail: Plunkettsb@aol.com

71381

126 www.farmersguide.co.uk June 2020

126-129 contractors & FG team.indd 126

19/05/2020 11:58


Contractors 69809

G C DIXON AND SON

Established since 1956 - based in Cambridgeshire

www.gcdixonandson.co.uk

Facebook: G C Dixon and Son

AGRICULTRAL CONTRAC TORS Covering all arable operations, including:  Heavy / light cultivations  Mole draining  Drilling  Rape drilling  Spraying  24m Avadex application  Rape swathing  Combining  Mowing / tedding / raking  Baling and chasing  Hedge cutting o  360 digger work Wheat, barley and rape straw wanted in the swath

For more information on our stubble to stubble and full farm contract options, please contact: DAN 07831761157 or NOEL 07702341374 EMAIL: info@gcdixonandson.co.uk

P. BOWERS

PHILIP BAUMBER Agricultural Contractor

Construction

SUGAR BEET DRILLING

18 row mulch drill with GPS guidance, tramlining, variable seeding, swath control & liquid fertiliser application SUGAR HOEING 12 & 18 row • WEED WIPING

WHOLE FARM CONTRACTS • CROP SPRAYING DIRECT DRILLING & COMBI DRILLING inc GPS guidance & fertiliser application

For all your building needs...

Please call for a chat – we are happy to help where we can

MUCK SPREADER HIRE –

15t Bunnings with flotation tyres & wide spreading rotors

360o EXCAVATOR HIRE – ROAD GRADING & CONSTRUCTION

71379 71390

From livestock, grain stores, straw sheds and workshops (industrial and agricultural) All groundworks undertaken, from drainage to concreting! Lagoons and water holding/sewage treatment plants, etc, also carried out

For high quality results and prompt service call

01526 322654 and 07976 550635 mail@philipbaumber.co.uk

07944 272 762 • peterbowers6@gmail.com

Scopwick, Lincolnshire

A. DOWNING

A W SMITH & SONS ORDERS NOW BEING TAKEN FOR MOLE DRAINING

AGRICULTURAL ENGINEERS & MACHINERY TRANSPORT

71385

COMPETITIVE RATES OTHER CULTIVATIONS & HEDGECUTTING UNDERTAKEN Ipswich, Suffolk 72243

FOR A QUOTE CALL:

07712 652267 or 07712 593105

Carlton Farm, Cattle Dyke, Gorefield, Wisbech, Cambridgeshire PE13 4NR UK NATIONWIDE EUROPEAN Tel: 01945 410099 • 07850 731409 www.adowningengineers.co.uk LOW LOADER SERVICES

Enhancing your environment... ...exceeding your expectations www.cgmltd.co.uk

0800 160 1199

01366 388738

• Flailing & Hedge Trimming on river banks, reservoirs fields & margins • Circular Saw Attachment available • Control of In-Channel Weed and River System weed cutting and clearance • Identification and Control of Invasive Species • Supply of Waste Containers and Skips • 360o Earth Moving & Clearance with long reach & tree shear capabilities • Tree Felling & Maintenance & stump clearance • Haulage of Equipment & Machinery with Hiab capability

71382

John Warne FARMER/CONTRACTOR

TRACTOR & DRIVER FOR HIRE Ring now for this season’s work Claas Quadrant 5300 120 x 90 x 250cm bales Carted if required Big Bale Transtacker 6072 bale chaser

John

Call on 01284 828240 or 07986 548621 Reed House • Karoo Close • Bexwell Business Park • Downham Market • Norfolk • PE38 9GA

Bury St Edmunds, Suffolk

71708

June 2020 www.farmersguide.co.uk 127

126-129 contractors & FG team.indd 127

19/05/2020 14:33


Contractors

David Cook

72489

Drainage & Ancillary Works

D. E. KEEBLE Agricultural Contractors

Owner Driver Specialists in... • Ditch maintenance & improvement • Land drainage & outfall pipe repairs • Culvert construction • Landscaping • Land/site clearance • All other excavation work

Suppliers of the finest hay & straw: Big Hesston, Mini Hesston & Conventional Bales Baling, Stacking & Delivery Service Straw Spreading for Winter Carrot Cover Muck & Sludge Spreading Hedge Cutting / Flail & Saw

WASTE TYRES & OTHER WASTE

71384

of Removal

Farms, Agricultural Contractors, Plant Hire & Earthmover

email: lindakeeble@btconnect.com

www.dekeeble.co.uk

Ltd JAMES P DIXON

Nationwide Bulk Haulage & Machinery Haulage

25 years’ experience in used tyre disposal Registered Environment Agency Waste carrier/collector National bulk collections in articulated trailers Mixed tyres accepted Forklift and plant tracks accepted Competitive prices • Excellent service

For free estimate and quote contact

loading services available please call for a quote

Chris Ingram – Intowaste Ltd

07860 670 201 email chris@intowaste.co.uk www.intowaste.co.uk

Tel: (Snape) 01728 688688 Mobile: 07889 642096

07771 665720

www.ditchmaintenancesuffolk.co.uk

71387

01359 258034 07823 555210

72295

www.livertonltd.co.uk

30 Harwich Road • Ardleigh Essex • CO7 7LS

t: 01206 230662 m: 07850 888002 e: phil@livertonltd.co.uk

GROUNDWORKS DITCHING SITE CLEARANCE VEGETATION MANAGEMENT Agricultural & Landscaping Throughout East Anglia

Contact Peter 07966 184580 • 01787 277710 email peter@pcrawfordltd.co.uk 72307

T M Matthews & Sons STRAW WANTED BEHIND COMBINE

www.pcrawfordltd.co.uk

72351

Specialist Machinery Hire Robocut – Mulcher, Forestry, Trencher Muck Spreader Hire Hedgecutting – Flail & Saw Low Loader Transport

YourFab LTD WELDING & FABRICATION

Norfolk & Suffolk Prompt Clearance and Payment Balers available for contract work

PROUD TO SUPPLY LIVESTOCK FARMERS Cherry Tree Farm, Tibenham, Norfolk NR16 1PJ

Harry: 07734 858878 Claire: 07778 703010 01953 861361/07860 865435

www.timmatthews.co.uk

‰ˆ „Š Š ‰ † ‡ˆ

„…† † † ‡ˆ

‹ ˆ ‡„Œ ‰ Ž

Ž Š„ Š ‰ † ‡ˆ

 Â? Â?Â?Â? Â?  ­Â€ ‚ ‚ ƒ ‚Â? Â?  ­Â€ ‚ ‚ ƒ

72345

(wheat, barley, oats, rye, rape)

71813

128 www.farmersguide.co.uk May 2020

126-129 contractors & FG team.indd 128

19/05/2020 14:34


A1 Installations ALUMINIUM GUT TERING SPECIALISTS

LEAKING GUTTERING?

GUIDE TEAM

EDITORIAL Editor Rachel Hicks rachel.hicks@farmersguide.co.uk 01473 694459 Production editor Sarah Kidby sarah.kidby@farmersguide.co.uk 01473 694450 Machinery editor David Williams david@farmersguide.co.uk

THE FARMERS

ADVERTISING Sales manager Greg Goulding greg@farmersguide.co.uk 01473 694454

t: 01787 474217 m: 07900 920023

Seamless aluminium guttering and gutter linings for all concrete, asbestos and metaI valley gutters. Ideal for Atcost, Crendan and Tyler type barns.

e: a1dave@hotmail.co.uk 72200

WE OPERATE NATIONWIDE

The material has a life expectancy in excess of 30 years. Please call or email for a free quote.

www.a1installations.co.uk STAR STILE HOUSE, COLNE ENGAINE ROAD, HALSTEAD, ESSEX CO9 2RP

DOMESTIC • INDUSTRIAL • NEW BUILD • AGRICULTURAL

ANGLIAN WILLOW SERVICE LTD WANTED...

69378

Managing director Julie Goulding julie@farmersguide.co.uk

■ We are looking to Purchase Cricket Bat Willow Trees ■ Minimum of 5 trees – Excellent prices paid! ■ Extraction & clearance is all included ■ Free re-planting of replacement young trees Call Geoff Watling on:

Senior sales executive Jana Moyes jana@farmersguide.co.uk 01473 694457

01245 349811 or 07974 575431 Email: gwatling@anglianwillow.co.uk

5 GENERATIONS OF EXPERTISE

Senior sales executive Joanna Blower joanna@farmersguide.co.uk 01473 694452 Sales executive Chloe Fulcher chloe@farmersguide.co.uk 01473 694451 Sales executive Sophie Brough sophie.brough@farmersguide.co.uk 01473 794444

01473 327596 or email: enquiries@collins-skiphire.co.uk

72052

Sales executive Sarah Aylward sarah.aylward@farmersguide.co.uk 01473 694451 Classified sales executive Nicki Waters nicki@farmersguide.co.uk 01473 694456 Classified sales executive Samantha Wilson samantha@farmersguide.co.uk 01473 694455

June 2020 www.farmersguide.co.uk 129

126-129 contractors & FG team.indd 129

19/05/2020 12:00


Farmers Guide 25 Years Ago The Royal Norfolk, the Suffolk and the Lincolnshire County Shows, together with the Cereals ’95 event, were all covered in the Farmers Guide in June 1995. The latest Case IH 2100 series Axial Flow combines, Taarup’s latest drum and disc mowers, and a special Coke of Norfolk exhibition were highlights at the Royal Norfolk Show. Princess Margaret, who was to present a number of long service awards, was the Royal Visitor at the Suffolk Show, where new equipment included the Fendt Xylon tractor, the latest Amac potato harvester and the one-pass Kverneland Packomat seeder. The latest generation of Renault Ceres tractors would also be at the Suffolk Show – the top-of-the-range four-wheel drive Ceres 95X had a £29,714 price tag. The ‘One Hundred Years of Harvest’ pageant was the main grand ring attraction at the 112th Lincolnshire Show. Machines at this show included the latest 15ft cut Opico Bush Hog set-aside mower for tractors over 100hp, and CTM Harpley – at the show for the first time – displayed their range of 2–6t/hour sugar beet cleaner loaders. The National Cereals & Combinable Crops event was moving to Shuttleworth at Biggleswade in Bedfordshire. Quivogne would be demonstrating their range of rolls and cultivation machinery and John Deere would be there with their new no-till drill. John Deere explained that the drill was virtually maintenance-free and had only one 50-hour grease nipple. The two-day Sprays & Sprayers event at the end of the month was also featured in the June 1995 Farmers Guide. As well as seeing a wide range of sprayers on the demonstration plots, visitors would be able to inspect previously sprayed plots. A comprehensive range of machines at Sprays & Sprayers included the latest Gem 2,000-litre selfpropelled sprayer, examples of Knight machines with the Degania air-sleeve system and Air-Jet twin fluid nozzles, and the latest self-propelled Houseman Super Sprint sprayer with hydraulically-

adjusted wheel tracks. In Farm Machinery News, Stanhay Webbs’ Singulaire vacuum feed precision seed drill had been awarded a Queen’s Award for Technology, Danagri introduced a high-speed square bale wrapper, and Reekie had launched a new soil separator for potato seedbeds. A potato bed former with four subsoiling legs was the latest innovation from Dowdeswell, and Yorkshire-based Farm Force claimed that consolidating land with a

front-mounted press could increase work rates with a power harrow drill combination by up to half an acre per hour. And finally... Described as a Fastrac nut, Suffolk farmer John Howlett was organising a Fastrac Rally at the local Wissett Treacle Fair, where competitions included picking up a football with a gadget on the Fastrac three-point linkage and undertaking an obstacle course with a glass of water balanced on the Fastrac bonnet. FG

Gunsmith light tractors The first three-wheeled Gunsmith light tractor, made by Farm Facilities at Maidenhead in 1948, was advertised as a machine that would do its work as well as any big tractor, often more precisely and always more cheaply. The Gunsmith took its name from the designer, Harold Smith, and Norman Gunn – both directors of Farm Facilities. Priced at £178, the first Mk I Gunsmiths had engines, gearboxes and rear axle units supplied by Brockhouse Engineering – manufacturers of the twowheel BMB Plowmate garden tractor. Drive from the JAP 6/7hp air-cooled engine was by flat belt to the two forward and one reverse gearbox. Some early Gunsmiths had a Briggs & Stratton power unit. Drive was engaged with a pedal-operated jockey pulley clutch, which tensioned the belt drive to the gearbox. The single front wheel was steered with a handle bar, assisted by pedal-operated differential brakes. Equipment for the Gunsmith included front, middle and rear tool bars, power take-off and optional belt pulley. The usual cultivation implements were available, together with a trailer, sprayer, air compressor and a pneumatic hedge trimmer. Launched at the 1957 Smithfield Show, the Mark II Gunsmith, with a £197 10s 0d price tag, had a steering wheel instead of the handlebars

used on the Mk I tractor. The Mk II was slightly wider, longer and higher than the earlier model and optional four-groove vee-belt pulleys on the engine and gearbox gave additional gears. An adjustable wheel track with axle extensions gave track widths from 30–58in and equipment included a side-mounted cutter bar and a double tandem disc harrow. A sliding mesh gearbox with four forward and two reverse gears was the main improvement on the later Mk III Gunsmith. There was also a four-wheel version of the tractor – probably made by Garden Machinery Ltd, who had previously purchased the Gunsmith business from Farm Facilities. About 300 Gunsmiths had been built when the last one was made in 1955.

In an advertisement for the Gunsmith light tractor, a happy owner described it as a wonderful machine that would do five hours' work in one hour while he sat in an armchair – his description of the tractor seat.

OLD 20 Parts Company

Most Part for Most Tractors Vintage, Classic & Modern T: 01332 792698 | www.old20.com

Mon - Fri 9am - 5pm | Worldwide Delivery Available | 130 www.farmersguide.co.uk June 2020

Henry Brown.indd 130

15/05/2020 14:27


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

Farmers Guide Place your

FREE advert

ONLINE or in the MAGAZINE

farmads.co.uk

Through www. To fax or post, see coupon on page 196

Deadlinefor forinclusion inclusionin inthe theMay July 2020 issue is 16th 18th April June 2020 Deadline

Richard Betts 4x4 Ltd • Lincolnshire Based • Please see website for more stock • All prices +VAT

2017 JCB TM320S 1881hrs, 145hp, 40kph Smoothride, hyd locking pins, constant flow hyd, limited slip diff, A/C, pin & cone, 50% tyres POA

2015 JCB 535-95 TELEHANDLER 9.5m reach, 3.5t lift, 4078hrs, 110hp, joystick control, A/C, PUH, selectable 4wd, reverse fan, sway control, 75% tyres £29,500

2003 JCB 530-70 TELEHANDLER 7m reach, 3t lift, powershift, 4ws/2ws/crab steer, Perkins engine, 50% tyres

NEW BAILEY FD 15T FLAT DECK LOW LOADER 10m (32’10”) length, hard wood floor, air & oil brakes, sprung drawbar, r/prop stands, £14,750 aluminium ramp, for hire/sale POA

2005 JCB 527-55 AGRI 2758hrs, 2.7t lift, 5.5m reach, hyd locking pins, PUH, joystick control, 4ws/2ws/crab steer, new tyres

2016 BAILEY BEETEAPER 20T TRAILER sprung drawbar, air & oil brakes, hyd door, grain chute, 10 stud commercial axles, 650/50x26.5 £18,500 CT Nokian, r/steering axle £17,950

2004 JCB 533-105 TELEHANDLER 10.5m reach, 3.3t lift, jack legs, powershift, 4ws/2ws/crab steer, perkins engine, 50% tyres

2016 TEREX TA3SH 3T SWIVEL DUMPER 1101hrs, hydrostatic, roll bar, seat belt, beacon, Kubota engine, road kit

2016 BOBCAT E10 MICRO DIGGER 640hrs, expanding tracks, hammer lines, twin speed tracking, servo controls, folding roll bar, 75% tracks, 3 buckets £9,500

2017 TRANSIT 290 TREND MEDIUM WHEEL BASE medium roof, 130ps, 6 speed, f/wheel drive, impact blue, phone, cruise control, £11,750 ply lined, 57,678 miles £11,200

2004 MERLO P33.7 TURBO FARMER 7m reach, 3.3t lift, 6577hrs, 110hp, PUH, hyd locking pins, joystick control, new tyres all £16,750 round, Manitou headstock £16,500

2008 BOMAG BW 80 ADH-2 TWIN VIBRATING DRUM ROLLER 136 recorded hrs, roll bar, seat belt, beacon, water, Kubota engine

£5,500

2008 BOMAG BW 80 ADH-2 TWIN 2014 SMC TL90 LIGHTING TOWER 2014 SMC TL90 LIGHTING TOWER 2014 SMC TL90 LIGHTING TOWER TRAILER ENGINEERING 1000L VIBRATING DRUM ROLLER 2855hrs, hyd mast, Kubota engine, 3079hrs, hyd mast, Kubota engine, 5752hrs, hyd mast, Kubota engine, WATER BOWSER 1897 recorded hrs, roll bar, seat belt, 2 x 110 volt plugs, fast tow, lights 2 x 110 volt plugs, fast tow, lights 2 x 110 volt plugs, fast tow, lights 2 outlets, good tyres beacon, water, Kubota engine

£5,500

£2,750

£2,750

2017 CASE MAXXUM 150 150hp boosts to 180hp, 1260hrs, 50kph, air brakes, f/linkage, weight block, f/susp, cab susp, warranty £750 May 2021, for hire/sale POA

£2,500

Buy and sell online — www.farmads.co.uk

T: 01522 246522 or 07764 511257 www.richardbetts4x4.co.uk

N ST O O 2 W C 01 AV K U 9 A N IL IT A S BL E

69155

New Holland T7.270 2019, 1150 Hrs, Front Links & PTO Mid Mount Valve, GPS Ready 1 Available

For more pics and info visit our website

www.cfsukltd.co.uk

01865 880866

Chris: 07808 703325 Adam: 07802 776113 High Quality, Low Houred, Used Agricultural Machines. WARRANTY ON ALL TRACTORS.

email:sales@cfsukltd.co.uk

UK Ltd New Holland T7.225 Auto Command, Front Linkage, Mid Mount Valve, 796 Hrs, 2019

New Holland T7.245 Power Command 50kph, 2019, 1254 Hrs, Front Linkage

£88,500

4 Available

£72,500

1 Available

£72,000

New Holland T7.210 Sept 2019, 745 Hrs, Range Command, 50kph, Air Brakes, Exhaust Brake, Front Weight. 5 Available

New Holland T6.145 20 Reg, 42 Hrs, 50kph, Full Suspension

£63,500

1 Available

£58,500

CFS TRACTOR HIRE, LONG & SHORT TERM HIRE AVAILABLE, PLEASE RING NOW FOR DETAILS ON 01865 880866! MANY OTHER NEW HOLLAND MODELS AVAILABLE – CALL FOR DETAILS June 2020 www.farmads.co.uk 131

fg_class_june_20.indd 131

20/05/2020 14:44


Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

On instructions from W&JC Edwards due to a change in farming policy

LODGE FARM, GREAT RAVELEY, HUNTINGDON, CAMBS, PE28 2QZ TIMED ONLINE AUCTION SALE OF LOW HOURED AGRICULTURAL TRACTORS, COMBINE HARVESTER, SELF-PROPELLED SPRAYER, LOADERS, IMPLEMENTS AND MACHINERY

Tractors: 2013 Case IH 450 Quadtrac (2,247hrs), 2010 John Deere 7930 (1,912hrs), 2002 John Deere 6920S (3,202hrs). Self-Propelled Sprayer: 2015 Househam AR3500 24m (1,516hrs). Combine Harvester: 2009 New Holland CX8080 24ft cut (1,626hrs). Loaders: 1977 JCB 413, Kubota KX251 midi-digger. Machinery: 2010 Simba Horsch Sprinter 6ST drill 6m, 2011 Vaderstad Carrier 925 cultivator press 9.25m, 2011 Simba SL500 min-till cultivator 5m, 2014 Dowdeswell 170 Series MA 10f on-land plough, 2016 McConnel PA6565T hedgecutter, 2006 AS Marston ACE14 trailers (2), 2011 Amazone ZA-M 1501 fert. spreader, 1999 Simba Cambridge Rolls 12.2m, Simba Pigtail cultivator 12.4m, 2010 TWB 5leg subsoiler. Also: cultivators, trailers, rolls, workshop equipment and spares.

COMMENCES: MONDAY 8TH JUNE 2020 AT 9.00AM FINISHES: MONDAY 15TH JUNE 2020 AT 12.00 NOON On instructions from Cambridge Drainage Co. due to retirement

DRIFTWOOD FARM, BOURN, CAMBS, CB23 2TB TIMED ONLINE AUCTION OF LAND DRAINAGE CONTRACTORS EQUIPMENT

On instructions from WJ Kendall & Sons and Thomas Banks and Partners due to a change in farming policy

EYEWORTH, SANDY, BEDS, SG19 2HH HARLTON, CAMBS, CB23 1EY TIMED ONLINE AUCTION SALE OF AGRICULTURAL TRACTORS, COMBINE HARVESTERS, SELF-PROPELLED SPRAYERS, MACHINERY AND EQUIPMENT

8no. Tractors: ‘16 Case IH 500 Quadtrac (2,262hrs), ‘14 Fendt 939 (3,363hrs), John Deere; ‘12 8360RT, ‘10/’08 6830 (2), ‘11 5100M, Case IH; ‘16 Puma 240 (3,048hrs), ‘09 Puma 140. Combine Harvesters: ‘13 Claas Lexion 770TT 35ft cut, ‘10 Case IH 9120 Axial Flow 35ft cut. Self-Propelled Sprayers: ‘11 Challenger RoGator RG655 36m, ‘09 John Deere 5430i 32m. Plant: ‘96 JCB 3CX Sitemaster. Machinery: Vaderstad A800S drill 8m, New Holland BB9090 baler, Heath Superchaser, Simba CultiPress 6.6m, Simba SL400 min-till cultivator 4m, Kverneland LO85 7f plough, KRM M3W fertiliser spreader, Dowdeswell 800S p/h 8m, FlexiCoil rolls 12m, Monopill SE 12row s/b drill, Simba TopTilth 8m, Cousins Contour rolls 12.3m, Quivogne TineMaster 4m, Dowdeswell 7f plough, Micron Varidome band sprayer, Vicon Andex 353 tedder. Also: cultivators, weight packs, guidance systems and spares. Included: Bateman; ‘10 RB26 24m, ‘03 RB25 24m, ‘10 JCB 541-70, ‘08 Land Rover Defender 110, ‘10 Chafer Sentry 6000 30m, Ifor Williams 14ft livestock trailer, Bomford 3000 topper

COMMENCES: MONDAY 15TH JUNE 2020 AT 9.00AM FINISHES: MONDAY 22ND JUNE 2020 AT 12.00 NOON

CAMBRIDGE MACHINERY SALES The Saleground, Sutton, Ely, Cambs, CB6 2QT

CONSIGNING NOW Drainage Trencher: ‘84 Mastenbroek 26/15 Tractors: ‘03 New Holland TM120, ‘92 JCB Fastrac 145, ‘84 Ford 7610. Plant: ‘99 JCB TM270, ‘96 JCB 409, ‘97 FiatHitachi FH130.3 Tracked Gravelers: 5no. company built machines (Morooka and Yanmar). Vehicles: ‘04 Volvo FM12 4x2, MAC SF3-44 tri-axle, Yanmar, FE280H (714hrs), ‘12/’06 VW Transporter (2), ‘08 Honda TRX250 Also: trailers, stone buriers, toppers, digging buckets and drainage requisites.

COMMENCES: WEDNESDAY 17TH JUNE 2020 AT 9.00AM FINISHES: TUESDAY 23RD JUNE 2020 AT 12.00 NOON

• Tractors • Telescopic Handlers • Excavators • Digger Loaders • Vehicles • Cultivators • Ploughs

• Hay Making Machinery • Balers • Combine Harvesters • Forage Harvesters • Livestock Requisites • Trailers

• Small Plant & Tools • Generators & Electrical Items • ATVs • Horticultural Machinery • Wheels & Tyres • Spares

FOR MORE DETAILS, PLEASE CONTACT THE DEDICATED AUCTION TEAM ON 01353 77767

Property | Land | Fine Art | Farm Machinery

cheffins.co.uk

AUCTIONS AND VALUATIONS UNDERTAKEN NATIONWIDE

01353 777767

132 www.farmads.co.uk June 2020

fg_class_june_20.indd 132

21/05/2020 15:47


FORTHCOMING AGRICULTURAL SALES

Buy and sell online — www.farmads.co.uk June 2020 www.farmads.co.uk 133

fg_class_june_20.indd 133

21/05/2020 15:49


FORTHCOMING AGRICULTURAL SALES

SALE BY ONLINE TIMED AUCTION

Brook Farm, Pertenhall Road, Swineshead, Bedford MK44 2AD Of Farm Machinery and Equipment Commencing at 7am Friday 26th June 2020 and closing at 12Noon Friday 3rd July 2020

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

VIEWING IS STRICTLY BY APPOINTMENT ONLY

Forthcoming Online Timed Farm Auctions Lowesmoor Farm, Cherington, Tetbury, Gloucestershire GENUINE DISPERSAL AUCTION OF FARM MACHINERY & EQUIPMENT

Ending Wednesday, 17th June

Including: Combine Harvester: Case IH Axial Flow 7120 (10), Crawler & Tractors: CAT Challenger M7755B (08), John Deere 6210R (13), John Deere 6920S (05), JCB Fastrac 2170 (11) with Knight D Mount 24m Sprayer (11), Ford 8210 (83); Material Handlers: JCB TM320S Agri (10) with various attachments; Vehicles: Ford Ranger 4wd pick up (05), Suzuki KingQuad (16); Trailers: 2No Bailey 14t grain (14), Easterby 14t grain, Truckspec 10t grain, Salop 6.5t general; Cultivation Equipment & Implements: Dowdeswell 155 8f rev plough, Dowdeswell 6f rev plough, Kuhn 4m powerharrow, Kverneland TS Evo 6m drill, Kverneland 9m springtine, McConnel Discaerator 3m, McConnel Shakerator 3m, Simba Cultipress 6.6m, Simba Cambridge rolls 6.6m, Cousins Cambridge rolls 12.8m, McConnel 270 mower, McConnel PA6500T hedgecutter; Miscellaneous: Various tools and workshop equipment etc. Further entries: John Deere 1450 WTS combine harvester (05), Case Maxxum 110 (12), Fiat 880DT 5 (84), Truckspec 12t grain trailer, Master Grain Drier 12t diesel fired, Maidwell mole plough, Cousins 6m OSR drill. FOR A FULL DETAILED LOT LIST AND PHOTOGRAPHS VISIT BROWN-CO.COM Viewing: strictly by appointment only on Wednesday 24th June and Thursday 25th June 10am – 4pm. Contact St Neots Office: 01480 213811 george.watchorn@brown-co.com jon.clampin@brown-co.com

Pink Lane Farm, Charlton, Malmesbury, Wiltshire GENUINE DISPERSAL AUCTION OF FARM MACHINERY & EQUIPMENT

Ending Wednesday, 24th June

For further information, please see website or contact: Emma Buse: 01285 648115 · 07342 997909 farmsales@mooreallen.co.uk

mooreallen.co.uk

Wreningham, Norfolk

130 Acres of arable land

For sale as a whole or in up to 4 lots Guide Price: £1 million Rachael Hipperson

07795 604 672

twgaze.co.uk

134 www.farmads.co.uk June 2020

fg_class_june_20.indd 134

22/05/2020 08:39


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

SP EC IA LP RI CE

71112

Pecks AgriTrac H – 41027176 – ex demo Case Puma CVX240M 4 elec rear remotes, 2 elec mid mount valves, 2 x110mm rear lift rams, power beyond, AFS connect ..................................................... POA

H – 31025775 – ex demo Case Maxxum 145 MC Multicontroller, 3 elec rear remotes, 540mm dyn front fenders, 24x24 50kph Active Drive 8 cab suspension ............................. POA

H – 41025757 – pre reg Case Puma 165 Multicontroller, full powershift, 19x6, 50kph, pneumatic brakes, 4wd axle, heated telescopic mirrors.................................................£79,800

H – 41027478 – 2014 Case Magnum 315 Powershift, 50kph, air brakes, AFS700 screen, guidance ready, joystick, 5 rear DA electric spools...................................................£69,500

J – 41025980 – ex demo Krone Big Pack 1290 HDP baler, c/w CCI 1200 in cab terminal, Starter Aid Big Pack, remaining base wty + 2 years extended Krone wty ................£115,000

J – 51025538 – used Krone Comprima V180 done 23,987 bales approx .............................................................£17,500

S – 41024434 – new shop-soiled Sulky X40+ spreader shut off fertiliser spreader, EV24-36 vanes, hopper extension to 600L, hopper cover manual winder ....................................... £7,950

J – 11024631 – new Teagle Park 160 20-50hp, rear mounted, up to 2cm cut, L hammer flails

J – 41025693 – new Krone R200 Activemo mower with RH swath plate

............................................................... £1,950

............................................................... £6,250

J – 11026990 – new Krone Swadro 42 single rotor rake, 3-point linkage, work width 42200mm, swath width approx 800–1500mm, rotor dia 3300mm .................................... POA

J – 31026493 – 2013 JCB 3230-65 T4i Xtra 540/65-R34 tyres, 4 spools, front linkage, 12 months/500hrs Driveline cover .............................................................£56,500

J – 21026589 – new Teagle TAP/S 200 LH 200cm cut width verge mower left hand, outboard gearbox, 6 spline wide angle PTO shaft ....................................................... £7,950

J – 11026571 – used JCB 541-70 AGS Agri Super,145hp, Q fit, 460/70R24 tyres

J – 41025843 – new Teagle TAP/S 250 right hand cut, outboard gearbox, 2m cut, fully hydraulic offset head adjustment, wide angle PTO ....................................................... £9,250

W – 21025873 – used Amazone ZA-M Ultra Profis Hydro 4200 spreader c/w 24–48m discs + Amatron 3 screen GPS switch licence .............................................................. £9,500

W – 31026915 – new Amazone ZA-V3200 Super Profis, c/w V-set 3 discs, (24m–36m), headland limiter V+, manual hopper cover, road lights, guard tube .........................£14,200

J – 51026184 – 2017 JCB 4220 540/65-R30 Nokian road tyres or 540/65-R34 ag tyres, 4 spools, 12 months/1000hrs Driveline cover ....................................................£79,500

J – 51026744 – used JCB 531-70 AGS 460/70 R24 tyres, Q fit carriage, A/C, Smoothride .............................................................£29,000

J – 21026607 – 2011 JCB 535-95 AGS 130hp, Q fit, 12 months/500hrs Driveline cover

J – 41026406 – 2013 JCB 531-70 AGS Agri Super, 145hp, Q fit, 460/70-R24 tyres

.............................................................£34,500

.............................................................£36,950

J – 51027043 – 2014 JCB 541-70 AGS Q-fit c/w hyd pin lock, 460/70-R24 Michelin 90% front 50% rear, SRS .............................................................£43,000

J – 11026572 – used JCB 541-70 AGS Agri Super 15.5-R25 tyres, 145hp, Q fit, 6 months/500hrs Driveline cover .............................................................£38,000

J – 51026696 – 2013 JCB 536-60 AGS Agri Super, 125hp, Q fit, 460/70-R24 tyres

J – 51025474 – 2017 JCB 525-60 AG+ Agri Plus, compact tool carrier, air conditioning, 12.5/80-18 tyres .............................................................£36,500

J – 21026233 – ex demo JCB 8330, 710/70-R38 rear & 600/70-R34 front tyres, 4 rear & 1 front spools, high flow, front free flow return, front linkage ................................................£145,000

.............................................................£41,000

.............................................................£39,500

Buy and sell online — www.farmads.co.uk

H – 11027002 – ex demo Case Puma CVX175 50kph, 4 elec rear remotes, 4wd, pneu brakes, 2 flashing beacons, radar with elec slip control .................................................................. POA

FOR MORE INFORMATION PLEASE CONTACT • H – HARVEY SHERWIN ON 07393 148299 • W – WAYNE COTTAM ON 07795 600043 • J – JON WAREING ON 07818 030561 • S – STEWART BARNETT 07818 030552 • OR VISIT OUR WEBSITE WWW.PECK.CO.UK

ELY – TEL 01353 664515 SPALDING – TEL 01775 712310 MAREHAM-LE-FEN – TEL 01507 568484

RAMSEY – TEL 01733 844642 DEREHAM – TEL 01362 698698 June 2020 www.farmads.co.uk 135

fg_class_june_20.indd 135

20/05/2020 14:44


136 www.farmads.co.uk June 2020

fg_class_june_20.indd 136

20/05/2020 14:48

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

Buy and sell online — www.farmads.co.uk June 2020 www.farmads.co.uk 137

fg_class_june_20.indd 137

20/05/2020 14:49


ATV Spares Specialists

AIR CONDITIONING

BALERS & BALE HANDLING

PAPWORTH

SALES SPARES TYRES SERVICE All parts available by mail order ORDER ONLINE TODAY!

VEHICLE AIR CONDITIONING

01284 771344

www.mkmagri.com

The ATV & UTV Specialists

01-66305

R134A .................................. POA Air conditioning service equipment •leak detectors •vac pumps •recovery machines AIR CONDITIONING PARTS FOR ALL FARM & CONSTRUCTION VEHICLES AT DISCOUNT PRICES We accept all major credit cards

www.thequadcentre.com • info@thequadcentre.com

SWATHERS & DRAPER PICK UP HEADERS WANTED RAPE

72118

Ian Houlgrave

ATVs/UTVs

01234 768889

www.mkmagri.com

The ATV & UTV Specialists

tractor....................................£3,950

SPARES & SERVICE

Manor Farm • Ixworth Thorpe Bury St Edmunds • Suffolk • IP31 1QH

Tel: 01507 466352 Mobile: 0780 134 3023 Fax: 01507 462812 Email: ian@ianhoulgrave.com

72452

Ford 3910 2wd

JF Z675 Pro

6 rotor tedder......................£2,750

SPARES & SERVICE

Sun Valley Works • Wood End Marston Moretaine • Bedford • MK43 0NJ

CARRYALL-1 Club Car golf buggy, petrol engine, c/w manual, vgc. £1,275. M Robson Tel 07967 139678 (N Yorks)

KAWASAKI Mule, diesel, power steering, 1500hrs, road registered, 13 plate, all good. £6,500+VAT. R Hopkinson Tel 07976 424263 (Lincs)

03-71426

TOMLINSON GROUNDCARE

Gator Main Dealer

SALESSERVICESPARES Vicon CM2400

mounted mower, 2011 .......................................£2,250

Welger RP245 Baler

Simba 12C discs

4.9m, hyd folding, pipes to rear drawbar.................................£5,750

07973 657609

All prices + VAT

Worcester

Hall Farm, Aldeburgh IP15 5JD MF 2640 4wd tractor very tidy......... £6,250 Gregoire Besson 5 furrow manual variwidth plough .............................POA John Deere 1085 combine c/w chopper..................................... £6,500 Case 956 XL 4wd tractor c/w front linkage ...................................... £8,500 Spearhead verge mower very good Various cultivators & subsoiler .............POA condition ........................................POA R&R 12t grain trailer c/w hydraulic Kuhn flail mower model VKM 280, tailgate ...................................... £3,750 2004 c/w side shift ........................POA Norton 8t dropside grain trailer ........ £2,500 Various grain buckets ...........................POA 20’ small bale trailer ........................... £750 MF 8160 4wd tractor............................POA Hardi Mega mounted sprayer................POA All tractors and machinery wanted – dead or alive!

See our new website for more details & photos www.hallfarmmachinery.com

Tom 07872 916363

70614

John Deere 1445 out front rotary 31hp diesel engine 1176hrs, 4wd hydro transmission, 62” Fastback RD deck .....£8,000+VAT 2018 John Deere TH 6x4 Gator 6 wheel, 4wd, tip kit, turf tyres, ex demo, 160hrs .....£10,750+VAT Buxhall, Stowmarket, Suffolk IP14 3DL

N

DE ERS GUI

FARM LYING HEN REP

W NTS RTISEME TO ADVE

£13,750 silage wrap/ twine/net wrap in stock!

01354 694701 07802 850212

www.gledhillaccessories.co.uk

gledhillaccessories@gmail.com

KVERNELAND 7551 static bale wrapper, takes 750mm wrap, reason for sale – upgraded to bigger machine 2yrs ago, kept it for standby, good order. £1,500+VAT. M Sands Tel 01945 440702 (Lincs) JOHN DEERE 359 conventional baler, 1990, 1.52 m/60” wide pick up, as last used 2019, tidy condition, £4,250+VAT. GDO Howell Tel 07903 089391 & 01728 723683(T) (Suffolk)

NH648 net wrap baler, wide pick up, in good working condition, used last year on our silage, hay & straw, can be run up. £3,150. R Morris Tel 01794 368191/07831 674522 (Hants)

www.tomlinsongroundcare.co.uk

MENTIO

2013, camless 2.5m pickup, 13 chopper knives, drop floor hyd, bale ejection, floatation tyres, serviced/ ready for work, stored inside, one owner, super Nick condition

KAWASAKI Mule Pro DTX, diesel, 2016, full cab, heater, radio, only 650hrs. £8,950. L Rich Tel 07774 112211 (Glos)

01449 736060 PLEASE

GLEDHILL ACCESSORIES

• Shelbourne Advantage, Mentor & SR 2500H • Hesston 8100, 6500 & 6400 • John Deere • Claas Maxi • Vicon • Stemas • Fortschritt

charliepapworth@gmail.com

Tel: 01954 267215

03-72430

Foxhunters Garage, West Down, Ilfracombe, N Devon EX34 8NU

ANDERSON Prochop 150 round bale feeder & chopper, new machine, easy to use control box with 2 cameras, no warranty. £6,500+VAT & delivery. J Clifford Tel 07889 007261/07812 940498 (Notts)

05-72526

71757

01271 320727

03-72429

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

We stock:

ETON Viper 90cc, electric start/ kickstart, working brakes, front & rear lights, current non runner due to a carb issue, turns over fine. £350+VAT. R Kerr Tel 07531 574681 (Essex)

NEW Holland pick up baler, wide pickup, barn stored, ties knots when it should! H Ashton Tel 07831 588318 (Lincs) COOKS bale sledge windrower. £250+VAT. J Kerley Tel 07967 819294 (Cambs)

138 www.farmads.co.uk June 2020

fg_class_june_20.indd 138

21/05/2020 16:10


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

All prices plus VAT

Louth • Lincolnshire • LN11 0HH

KRONE KW7.82 TEDDER 2020, 6 rotor, 7.8m working width

CASE IH PUMA 150 as new, 50k semi-powershift, 4 mechanical spools, 650/65R38 – 540/65R28

CASE IH PUMA 175CVX 2017, 1900hrs, 650/65R38 – 540/65R28, 4 remote valves

CASE IH PUMA 220CVX 2018, as new, 650/65R42 – 540/65R30, f/linkage with PTO, 4 remote valves

New K-Two Rodeo curve trailers choice of new 12 / 16t available New Sumo trio 3m mounted choice of auto reset or shear bolt breakback

Contact Philip Stephenson: 07715 077924

01302 759969

DEMO MCCORMICK X7.690 POWER PLUS font linkage & PTO, air brakes, cab & front suspension

£97,000

MASCHIO GIRAFFONA 230/260 flail mowers now in stock, phone for details

www.louthtractors.co.uk

Unit A7 Lords Wood Road, Harworth, Doncaster, South Yorkshire DN11 8BZ

2020 KRONE SWADRO TC 760 PLUS TWIN ROTOR RAKE electric height adjustment, individual rotor lift

£17,800

Ex-Demo Sumo Vaxio 6m cultivator year 2019 KRM Bogballe fertiliser spreaders phone to discuss your requirements

72519

CASE IH PUMA 230CVX 2014, 5100hrs, guidance ready 540/65R28 – 650/65R38 Michelins

SUMO MIXIDISC 6M 2019/ex-demo, 800mm multipacka roller

New Maschio Alitalia combi drill 3m, single disc coulter

info@moorefarmservices.com

NEW 2020 KRONE SWADRO TC 640 TWIN ROTOR RAKE central swath curtain and steering

£14,000

Buy and sell online — www.farmads.co.uk

A selection of machines available from our current stock, phone for details

NEW AMAZONE ZA-V 3200 PROFIS TRONIC PTO drive, weigh cell, Isobus, hopper cover, parking wheels £12,500 also ZA-V 3200 SUPERIOR £8,500 ALSO IN STOCK/COMING IN SOON...

2013 AMAZONE AD-P SPECIAL 3m combination drill with KE3000 super p/harrow, excellent £15,000 2008 AMAZONE ZA-M 2200 spreader

£1,200

2000 CASE MS1200 24M mounted sprayer with 1000L Gem front tank

£5,500

2009 CLAAS 2900 LINER electric controls, hydraulic width adjustment

£12,500

2020 KRONE KW 6.72 6 rotor tedder

£9,000

71755

2020 EASYCUT R280 plain mower

NEW 2020 KRONE EASYCUT F320CV FRONT MOWER CONDITIONER

DEMO AMAZONE 4M CEUS CULTIVATOR front discs, tines & double D roller

NEW 2019 KRONE EASYCUT R320 CV MOWER CONDITIONER with parking stands

£14,000

£47,000

£12,750

All prices plus VAT

£9,000

2020 KRONE KW 8.82 8 rotor tedder

£8,000

2019 KRONE BALE COLLECT bale accumulator

£17,000

2013 KVERNELAND TAARUP 2632 3.2m mower

£3,250

2015 McHALE ROUND BALE CHOPPER

£9,000 KUHN AXERA FERTILISER SPREADER ideal for spares or repair £1,000

www.moorefarmservices.com June 2020 www.farmads.co.uk 139

fg_class_june_20.indd 139

21/05/2020 12:59


Tel: 01580 291271 • Mob: 07836 723944 • sales@markhellier.co.uk

£4 2, 50 0

2017 Case Puma 220 Powershift c/w Case LRZ160 loader

£4 8, 00 0

2014 Case Puma 230 CVX 5295hrs

2017 MF 7718 Dyna 6 Exclusive 1250hrs WARRANTY until Jan 2021

2017 Case Puma 220 power shift with Case LRZ160 loader, 4042hrs, 220hp, 50kph, air brakes, front axle suspension, cab suspension, front linkage, full power shift, guidance ready& screen, Power Beyond, LED work lights, climate control, deluxe seat, 4 speed PTO, front tyres 600/70x28 30% Michelin, rear tyres 650/75x38 50% Michelin ................................................. POA 2014 Case Puma 230 CVX, 5295hrs, 50kph, front linkage, guidance ready, 1 front service, front tyres 600/60x30 30%, rear tyres 710/60x42 40%, if preferred this tractor can be fitted with front tyres 540/65x30 50% & rear tyres 650/65x42 50% rear tyres .................................. £42,500 2017 Case Puma 165 CVX, choice of 3, 2 with loaders, 3500–3800hrs .......................... POA

MASSEY FERGUSON: 2017 Massey Ferguson 7718 Dyna 6 exclusive (1st reg Jan 2017) 4671hrs, front linkage, Datavision hydraulic top link, air brakes, 4 spool valves, front tyres (not a pair) 540/65x28 40%, rear tyres 650/65x38 70%, 1250hrs warranty until January 2021 ................................................ £48,000 2015 Massey Ferguson 7720 Dyna 6 exclusive, 6850hrs, 50kph, front linkage, air brakes, hydraulic top link, climate control, evolution seat, front tyres 540/65x30 40%, rear tyres 650/65x42 60% ............. POA

CLAAS: 2015 Claas Arion 650, 5800hrs, front linkage, mechanical spool valves, 90% tyres . £34,500

FENDT:

2014 Fendt 828 Profi Plus 6971hrs

2014 Fendt 828 Profi Plus, 6971hrs, 280hp, 60kph, air brakes, front axle suspension, cab suspension, air seat, front linkage& PTO, continuously variable, evo seat, 1 front hydraulic service, 5 rear spool valves, rear wheel weights, front tyres 600/65x30 25% Michelin, rear tyres 710/85x38 25% Michelin .................. £57,000

£5 2, 00 0

NEW HOLLAND: 2013 New Holland T7.210 Power Command, 6918hrs, 50kph, air brakes, front axle suspension, cab suspension, front linkage & PTO, hydraulic top link, Power Beyond, guidance ready, 3 speed PTO, climate control, mid mount valves, exhaust brake, front tyres 540/65x30 25% Goodyear, rear tyres 650/65x42 40% Goodyear ....... £36,000 2014 New Holland T7.200 Range Command, 4812hrs, 50kph, air brakes, front axle suspension, cab suspension, front linkage, semi power shift, 4 manual valves, 3 speed PTO, front tyres 16.9x30 10%, rear tyres 20.8x42 10% tidy tractor other than some rust on rear wheels, re-advertised due to time waster....... £34,500

2016 Fendt 716 Profi S4 6890hrs IMMACULATE

£5 6, 00 0

2018 Case Puma 185 with Case LRZ160 loader, 1461hrs, 185hp, 50kph, air brakes, front axle suspension, cab suspension, front linkage, full power shift, ABS, full guidance, mid mount valves, mechanical spool valves, front tyres 540/65x30 80% Michelin, rear tyres 650/65x42 85% Michelin, re-advertised due to time waster .............................................. £72,500

2012 Fendt 936, 9683hrs, one owner, immaculate ...................................... £56,500

2012 Fendt 936, 9683hrs one owner, IMMACULATE

VALTRA: 2018 Valtra S394, 2108hrs, 400hp, 50kph, air brakes, front axle suspension, cab suspension, front linkage, continuously variable, full Trimble guidance, 6 rear spool valves& 2 front, front tyres 650/60x34 80% Trelleborg, rear tyres 710/75x42 85% Trelleborg................ £95,000 2015 Valtra T234, 7273hrs, 50kph, front & cab suspension, front PTO, one front service, Power Beyond, front tyres 540/65x30 (1 30% - 1 40%) Michelin, rear tyres 650/65x42 50% Michelin, the transmission clutch packs have been overhauled ....................................... £45,000

£3 6, 00 0

1999 Case International CX90 MFD, 5918hrs, 90hp, air conditioning, deluxe cab, very tidy, front tyres 12.4x24 20% Goodyear original, rear tyres 13.6x38 50% Goodyear original ................................... POA

2016 Fendt 716 Profi S4, 6890hrs, Isobus ready, front tyres 420/90x30 40%, rear tyres 480/80x46 10%, immaculate ... £52,500

2013 New Holland T7.210 Power Command, 6918hrs

A DYNAMOMETER READING IS AVAILABLE ON ALL TRACTORS

NOW IN:

£3 4, 50 0

PO A

2018 Case Puma 185 c/w Case LRZ160 loader, 1461hrs

2015 Case Magnum 315 CVX, 3332hrs, 315hp, 50kph, air brakes, front axle suspension, front linkage& PTO, continuously variable, full Accuguide, PUH, front tyres 600/70x38 80% Michelin, rear tyres 710/70x42 60% Michelin .................. £70,000

2004 Fendt 716 TMS, 12500hrs, front PTO, 20% tyres, average ........................... £21,000

2014 New Holland T7.200 Range Command, 4812hrs

ENGINES: NEW CNH ENGINES to fit Tier 3, Maxxum 115 & TSA 115, Case Puma, plus New Holland T6 & T7 TYRES: PRICES YOU WILL NEVER GET ANYWHERE ELSE! 440/65x28 Continental (2), 480/65x28 Continental (9), 420/70x24 Continental (20), 380/70x24 Trelleborg (28), 380/70x24 Firestone (12), 320/85x24 Continental (5), 340/85x24 Firestone (6), 13.6x24 Pirelli (12), 14.9x24 Pirelli (8), 540/65x30 Continental (4), 480/70x34 Continental (8), 540/65x30 Firestone (6), 340/85x38 Firestone (4), 650/65x42 Nokian road tyres (4), 520/70x34 Continental (18), 480/70x34 Continental (15), 460/85x30 Firestone (6), 20.8/46 (5), 480/95x50 (1), 650/75x38 (2) Continental, 650/65x42 Continental, 600/65x38 (1) Continental, 520/70x38 (1) Continental, 480/70x34 (18) Continental, 420/85x34 (2), 710/70x38 (1), 650/65x38 (2), 600/65x38 (1), 480/80x42 (1)

£9 5, 00 0

£7 2, 50 0

2015 Case Magnum 315 CVX 3332hrs

2014 Case Puma 160 CVX, 5382hrs, 160hp, 50kph, air brakes, front axle suspension, cab suspension, front linkage, continuously variable, mid mount valves, Power Beyond, front tyres 480/70x30 0% Trelleborg, rear tyres 580/70x42 0% Trelleborg ......................................... £37,000

2018 Valtra S394 2108hrs, 400hp

£4 5, 00 0

£7 0, 00 0

CASE:

£5 7, 00 0

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

71357

2015 Valtra T234 7273hrs

We are expecting more tractors to arrive in our yard shortly – Keep an eye on the website! Find the most desirable stock at

www.markhellier.co.uk

140 www.farmads.co.uk June 2020

fg_class_june_20.indd 140

20/05/2020 14:52


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

Mettron Weighbridges Beware of Imitations

72468

John Deere 5100M 2018, 941hrs, PR 32/32, A/C, dual rear SCV, 420s, 340s, hyd trailer brakes, PUH ....................................... £37,000

John Deere 3420 2004, approx 8000hrs, 4spd Synchro trans, 17/5LR24, A/C, PUH, boom susp, pin & cone headstock ..................... £21,000

New Holland LM50-30 2013, 2495hrs, Only 7’ high, 405/70R24, Manitou headstock

John Deere 582 2010, 20359 bales, round baler

We have a great selection of used Gators Available please contact Richard Gill on 07415 115620

Price includes new indicator/printing system, delivery, installation and legal certification for trade use. 72366

John Deere 6145R 2017, 2908hrs, DD 40k, 3 e-SCV, TLS, 650s, 540s, Isobus/Greenstar ready ....................................... £66,500

£79pw 16m - steel platform with ramps - £16,000 + VAT £89pw 18m - steel platform with ramps - £18,000 + VAT

Visit our website www.masonskings.co.uk to see more tractors and other machinery available E: stuart.vanstone@masonskings.co.uk Masons Kings in Somerset Exebridge Industrial Estate, Exebridge, Near Dulverton, Somerset TA22 9BL T +44 (0) 1398 322140

Masons Kings in Cornwall Masons Kings in Devon Unit A, Higher Trevornick Rixey Park, Kingsteignton Road, Business Park Winnards Perch, Chudleigh, Devon St Columb Cornwall TR9 6DH TQ13 0BY T +44 (0) 1637 881814 T +44 (0) 1626 852140

Call 01782 816730 or email mettronweighing@aol.com to discuss options and to arrange your site visit

Mettron Weighing 71345

07768 171085 March • Cambs info@harrisontractors.co.uk

Photos & more at:

John Deere 6210R 2011, 5800hrs, Autopower, 50k, f/linkage, Trelleborg 650/85/38, 600/85/28 90%, v nice £54,500

John Deere 2250 1999, 7000hrs, grass tyres, tidy tractor

JCB 541-70 Agri Super 2016, 3300hrs, full spec, 17.5x24 70%, v nice

John Deere 6190R 2013, 4400hrs, Powerquad, 40k, TLS, cab suspension, 520/85/30, 480/85/28 80%, v nice £49,750

New Holland T7.260 2014, 4900hrs, 50k, Power Command, f/linkage, mid mount joystick, £6,950 580/70/38, 480/70/28 £39,250

JCB 531-70 Agri 2014, 5000hrs, Powershift, PUH, hyd locking, 17.5x24 70% £45,000 £28,750

John Deere 6150R 2015, 2013, Autoquad, 50k, 3100hrs, 6600hrs, nice tractors from £44,500

John Deere 6830 2011, 9700hrs, Powerquad, 40k, TLS, a/brakes, 520/8538, 420/85/28, 60%, v tidy for hrs £28,500

John Deere 6330 2008, 6400hrs, JD 633 loader, 40k, air con, tidy outfit £28,500

Case Puma 160 Massey Ferguson 8460 Dyna VT Massey Ferguson 6480 4700hrs, 50k, Power Command, air 50k, front linkage, 620/70/42, 2005, 6400hrs, Dyna 4, 40k, brakes, 650/65/38, 540/65/28, 490/70/30, cheap horsepower 20.8x38 16.9x28 tidy £34,500 £29,500 £19,500

McCormick MTX 150 2012, 5600hrs, front linkage & PTO, suspension, 600/65/38 480/65/28, tidy £25,500

Manitou 735-120 LSU 2012, 6000hrs, Powershift, Manitou headstock, 17.5x24 50%, tidy £23,500

John Deere 6930 2008, Autopower, 40k, TLS, front linkage & PTO, 520/85/38, 420/85/28, nice tractor £32,500

www.harrisontractors.co.uk

Pottinger Lion 6000 Pottinger Terrasem C6 6m power harrow, quick fit tines, 6m drill, full spec, packer roller, new, used 2010 & 2012 & ex demo available POA

Buy and sell online — www.farmads.co.uk

....................................... £27,500 ......................................... £9,975 All prices +VAT

Richard Western 16t trailer, hyd door, sprung drawbar, roll over sheet, 560/60/22.5 POA floatations, v tidy £10,500

June 2020 www.farmads.co.uk 141

fg_class_june_20.indd 141

20/05/2020 14:54


Blackwater Agri Services Ltd

CLAAS Markant 55 conventional baler, good order, always stored in the dry, used last year with no problems. £3,400+VAT. D Raven Tel 07825 151798 (Suffolk)

BALERS & BALE HANDLING (cont)

Farm Waste Collection Service

BROWNS Flat 8 bale grab & old bale sledge. R Rayner Tel 07808 066655 (Cambs)

Efficient and reliable free of charge collection service for all recyclable materials.

Technology based waste management service, providing duty of care to retrieve records & trace your waste for 100% transparency.

NEW Holland small square conventional baler, 1989, used last year. £1,500. A Warren Tel 07809 396804 (Bucks) Ex demo McHale V660 round baler

No fuss or disruption with one annual collection required.

Sudbury, Suffolk T: 01787 960000 E: farmwaste@certified-sustainable.co.uk www.certified-sustainable.co.uk

JOHN Deere 590 round baler, used last season, always dry stored, twine only & good belts. £2,150. J Ramsey Tel 01653 628366 (N Yorks) BROWNS bale grab, strengthened to handle big bales, good working order. J Howard Tel 01994 419472 (Pembrokeshire) RUSSELL bale transporter. £300 ono. R Baldwyn Tel 07970 184954 (Glos)

72319

BROWNS flat 8 bale accumulator, 2002, excellent condition. £600. RF & PN Gosling Tel 07798 808710 (Warks) CLAAS Rollant 625 round baler, barn stored, ready to go, good condition, c/w instruction manuals, net wrap or string, free wrapper to purchaser of baler. £1,600 ono. R King Tel 01277 899200 (after 8.30pm) (Essex)

3 belt bale chamber, chopper, hydraulic brakes 0% Finance £29,000+VAT

David: 07879 698473 Karl: 07500 448243 Washingborough, Lincs T: 01522 790720

GRUNDY AGRICULTURAL

Teagle TBM250 flail, immaculate, 2015 ................................................£4,150 Claas Arion 420, 65 plate, 6500hrs, f/l ............................................... £23,750 Bomford Hawk 6.5t telescopic hedger, 2010.......................................£8,950 Marshall 6cu/m muck spreader, immaculate, 2018.............................£3,850 Fleming 10cu/m muck spreader, wide tyres, 2014 .............................£3,750 Kubota 008 digger, c/w 3 buckets, 2005 ..............................................£4,150 Landini Vision 105 c/w loader power shuttle 2009 vgc ................... £17,950 Case 4240XL c/w Quicke loader P reg............................................... £10,450 Vaderstad Rollex 620 c/w hyd shatter boards ......................................£2,950 Teagle Tomakawk 4040 chopper ...........................................................£1,500 Twose 520 hedger cable control ...............................................................POA Three weigh celled Amazone spreaders .................................... from £2,995 Ford Transit 2008 100k miles LWB high top .........................................£2,995 Vaderstad Rapid A400S 4m drill 2007 new genuine discs.............. £15,950 Gull 2000L twin axle fuel bowser ...........................................................£1,450 Claas Quantum 5800P forage wagon 2011 ...................................... £28,500 Various tedders, mowers & rakes in stock .............................................. CALL Malone 6’ pasture toppers new in stock & ready to go ............ £1,175 each New pallet carriages ..........................................................................from £450 New LWC buckets & grabs in stock British built .................................... CALL Major 8400 finishing roller mower, 2002 ..............................................£2,750 New Malone tedders in stock, 5.7m ......................................................£6,250 New Malone post bangers, side & t/l tilt...............................................£2,600 Barford SX6000 dumper 2006 ...............................................................£4,750 Reco Ferri hedgecutter ...........................................................................£2,995 Marshall 55 spreader 2005 .....................................................................£2,750 Rolland 10T trailer hyd tailgate 2000 ....................................................£3,850 Muthing SE250 offset verge topper 2006 ............................................£3,250 Muthing Pro250 front rear flail 2006 .....................................................£3,150

NEW Holland 276 for spares or repair, north Essex. Offers. T Wells Tel 07855 165018 (Essex) RITCHIE 56 bale transporter, gwo. £600+VAT. J Kerley Tel 07967 819294 (Cambs) BALE elevator on wheels, single phase electric, 2 stages, adjustable height & pitch. Open to offers. J Rice Tel 07759 650475 (Suffolk)

All prices + VAT

70640

05-72476

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

• Dependable pre-harvest clear-out • Total waste management on farm waste materials • Total visibility and control over the fate of your waste

ALBUTT Bale King Model F650HX, will grab & hold 3 Hesston bales, 3 round bales or 4 midi bales, Hardox tines, will load into curtainsider lorries, only loaded 15 lorries, excellent condition, paint still on points! JCB brackets. £3,000+VAT. A Maddever Tel 07899 665180 (Suffolk)

t: 01243 575333 • m: Joe 07540 013587 e: mail@ hjknight.co.uk • www.hjknight.co.uk

BALER International B47, good working order, stored in barn, can be seen working. £450 no VAT. C Elmy Tel 01728 648680/07784 787762 (Suffolk)

2013 Massey Ferguson 2170XD, excellent condition, only 33k bales, c/w bale weigher. £55,000. R Deane Tel 07889 780572/01785 851926 (Staffs) CHERRY Products big bale grab, good working order. J Howard Tel 01994 419472 (Pembrokeshire)

BALE carrier, 56 bales, very usable, tyres OK, ready to go to work. £650+VAT. P Crudge Tel 07889 328299 (Oxon)

FARMHAND bale grab & 56 bale carrier, also Cooks 8 bale accumulator. £850 the lot. G Kemp & Partners Tel 01379 783608 (Suffolk)

ENGINES & SPARES timikenginerecon

CLAAS 3200 RF, 2010, low bales – only 32500, dealer maintained, one careful owner from new, auto lube, 120x70 bale size, barn stored. £32,000. L Rich Tel 07774 112211 (Glos)

LELY Welger AP360 pick up baler, 2002, hydraulic pick up reel, 1 owner/operator, excellent condition. £5,500. RF & PN Gosling Tel 07798 808710 (Warks)

LELY Welger AP830, 2009, low bale count, barn stored, serviced annually, immaculate. Offers over £10,000+VAT. J Kerley Tel 07967 819294 (Cambs)

BEET EQUIPMENT WEBB 6 row front mounted sugar beet hoe. £550+VAT. P Freeman Tel 07711 145124 (Lincs)

Perkins & Ford/New Holland engines

www.timik.co.uk

01489 896 626

sales@timik.co.uk

72234

New/Reman, Dyno tested, engine blocks & parts available New JCB 444 engine stock! Tier 2 & 3 engines – 55kW, 63kW, 68kW, 74kW, 85kW, 97kW and 108kW available

MOUNTED bale wrapper, can only be described as in excellent condition, 500mm film, counter, cable controls. J Pesterfield Tel 07745 974651/01347 889299 (N Yorks)

ABT round silage bale squeeze, removable sleeves so can be used as a bale spike too. £275+VAT; bolt on Manitou bracket available separately. D Coe Tel 07867 578854 (Suffolk)

KONGSKILDE Vibrocrop inter row beet cultivator, 6 units. J Savory Tel 07584 308120 (Norfolk)

142 www.farmads.co.uk June 2020

fg_class_june_20.indd 142

21/05/2020 16:17


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

A DOWNING AGRICULTURAL ENGINEERS & MACHINERY TRANSPORT

unce We are pleased to anno we are now dealers for

NEW McCormick X4-440 2wd 75hp, 16x16 speed transmission, spacious easy clean air con cab, PUH, full warranty

New Holland 940 baler No VAT

£28,995 selling on behalf of private customer

£3,250

Kioti K9 utility vehicle with heater,

65 reg McCormick X60-40 110hp, front weights, a/c, 4wd, 40kph, aux hyd tank, passenger seat 1000hrs

£29,995

Tomlin 6’ grass topper

New NC 16t tandem axle beaver tail with sprung ramps, plant low loader, hyd brakes & sprung drawbar

£10,450

Available for demo Kioti K9 Contract Hire £339/month

tic Kioti CK3310 HST hydrosta r cto tra t ac mp co on ssi transmi y, ear warrant ROPS, full road lighting, 5-y turf or ag tyres

Available for demo

Pegoraro 3m power harrow Kioti CK3310 HST 2010 McCormick MC130 packer roller, adj clod board, quick fit tines, brand mid PTO for cutter deck, hydrostatic transmission, f/w MX loader, 5760hrs new rear up & over linkage for drill, r/PTO drive 33hp £1,350 shaft, only 2yrs work, little used £4,999 £12,999

New Pegoraro 5m folding power harrow heavy duty, packer roller, adjustable clod board, wheel track erradicators, lights

International Harvester B275 full engine overhaul, brakes, good tyres, receipts to warrant price, £8,995 selling on behalf of customer

International B434 full engine overhaul, great little tractor, work or play, £3,600 selling on behalf of customer

£3,400

71007

£19,500

Pegoraro 3m power harrow packer roller, adjustable clod board, tine wheel eradicators

POA

McCormick X8 available for demo now up to 310hp

Hyundai generator 110v & 240v, electric start, diesel engine, silenced, 7KVA

McCormick X2.35 51hp 4wd, Rops, front weights, ag tyres

Ovlac 4f plough 2019, ex demo, reversible

£18,750

Ovlac 4m disc 2019, ex demo model

£9,995

McCormick X7. 460VT Massey Ferguson FE35 4 cylinder 2019 (69 reg),165hp boosts to 175hp, VT drive, 50k, air brakes, precision steering ready, POA 4yr warranty, 0% finance POA

Buy and sell online — www.farmads.co.uk

28hp, diesel engine, full cab tipping body, 4wd, half tonne hydraulic ranty war ear 2-y kit, of bit cracking

£23,995

Ferguson FE35 4 cylinder new tyres, recent paint

£1,500

£3,500

OTHER MACHINERY New McCormick X7-460 VT RTK guidance, front linkage, PTO, 50k, 175hp, air brakes, available for demo ...... POA Pegoraro D3000 3m p/harrow, h/d, packer roller, eradicator tines, slip clutch, PTO ...................................... £8,995 Pegoraro W5000 fldg p/harrow, 250hp g/box, fluo system floating beds, track erads, packer rollers, adj clod board, in stock ............................................................................................................................. £19,500 Tomlin 4’, 5’, 6’ & 8’ mowers.................................................................................................................from £875

Carlton Farm, Cattle Dyke, Gorefield, Wisbech, Cambridgeshire PE13 4NR

Bomford Bandit 2.5m flail mower, new flails, good working order ................................................................ £1,400 Downing 2.5m spring tine paddock harrow ................................................................................................. £1,295 2 x 6’ finishing mowers ...............................................................................................................prices from £575 Selection of 2 and 4 wheel drive rough terrain forklifts .................................................................. Cheap to clear All prices plus VAT unless otherwise stated

Tel: 01945 410099•07850 731409 www.adowningengineers.co.uk June 2020 www.farmads.co.uk 143

fg_class_june_20.indd 143

20/05/2020 14:55


LOW RIDE TRAILER

Peter Wragge

Supplies Ltd

TWO heavy H section girders, previously used to bridge river, 30' (9.25m) in length, 15" x 6" (38mm x 150mm) x 10mm thick. £400 each, no VAT. Collection from Hampshire. R Morris Tel 01794 368191/07831 674522 (Hants)

Air 32’ tri axle

Email: whiteheadmachineryltd@gmail.com Call George: 07968 098410 Ashford

BEET EQUIPMENT (cont)

Multiple available

BUILDINGS & MATERIALS OAK beam, 16'. £300. G Meadows Tel 07951 111182/01728 660577 (Suffolk)

t: 01449 737192

e: rob@peterwraggesupplies.co.uk www.peterwraggesupplies.co.uk

OAK floor boards, 20mm thick, 150mm wide, tongue & groove, 200m available; also OG skirting board & ledge brace door. £48 per sq/m. J Hatton Tel 07803 721236 (Essex) 08-68944

06-72253

FOR INDUSTRIAL AGRICULTURAL & DOMESTIC USE We also supply... composite panels, fibre cement sheeting, accessories, fixings, fillers, mastics & can deliver to almost anywhere in the UK

ROOFING MATERIALS 2018 CTM 9053XL high volume spiral roller unit extraction unit PRECLEANER, slew, powered wheels multi-functional radio control

For Cleaner Loaders Contact: Nigel Mountain Mob: 07785 972510 or Email: nigelm@ctmrcs.co.uk

TIMBER, sectional, insulated building, 48' long, 20' wide & 8' to ridge, dismantled. £1,000. H Brown Tel 07764 477766 (Cambs) PAVING slabs (14), 3' x 2'. Offers. N Ward Tel 01733 210366 (Lincs)

galvanised and PVC coated steel corrugated or box profile first and second quality Non asbestos Big Six and Std 3in sheets, fittings and accessories

01622 832666 07939 114023

Hardy Roofing Supplies www.hardyroofing.co.uk

2015 ROPA Tiger 5 Usual ROPA top specification, 45/50 with allround topper 40km/h CVR & auto stability

2008 Vervaet 617 Beet Eater now in refurbishment, many new parts 45/50 with low hours, ready to harvest

For all harvester details Contact: Simon Peacock Mob: 07717 416178 or Email: simonp@ctmrcs.co.uk

LARGE plastic twin wall culvert, 12m long x 3m wide internal, ideal for large fen drain crossing, delivery can be arranged. £2,500+VAT. C Wisson Tel 01480 830224 (Cambs) BROADWATER concrete mixer, 1cu/m, forklift or tractor mounted, hydraulic drive, only used on once. £1,850+VAT. I Cowell Tel 07788 985544 (Essex) WILLERBY 4 berth caravan & scrap metal. Free to collect. N Ward Tel 01733 210366 (Lincs) LARGE quantity of crushed hardcore & tarmac road planings for sale in Bedfordshire area. M Elliott Tel 07801 903211 (Beds)

STANDING portal framed farm building, 100' x 40' in five 20' bays, 14' to eaves, box profile cladding on roof & gable ends, buyer to dismantle. £3,000. F Cook Tel 01986 788043/07917 097938 (Norfolk) 08-70327

02476 659 767

STEEL trusses (6), 40' span, approx 25 degree pitch, c/w 15' wooden purlins, all dismantled & on the ground, buyer to arrange transport. £1,000+VAT ono. O Martin Tel 07703 846296 (Herts)

Zurn 20’, Biso 20’ & Cheval 30’ Rape Extensions

COMBINES & HARVESTERS OSR HEADER EXTENSIONS to fit New Holland combines, 20’ & 24’. POA. A W Slatter Tel 07831 244269 (Warwickshire)

Rodney Cowle Machinery

07786 391816

COMBINES FOR SALE 2011 NH CR9090

35’V 2494/1734

2012 NH CR9080

30’V 2712/2182

2012 NH CR9080

30’V 2303/1849

2010 NH CR9080

30’V 2483/1995

2008 NH CR9080

30’V 3110/2356

2006 NH CR980

30’V 2805/2284

2005 NH CR980

30’XHC 2669/2175

2004 NH CR980

30’XHC 2670/2175

2004 NH CR980

30’V 2821/2265

2013 NH CX8070

25’

1984/1526

2016 NH CX8.80

30’V

600/500

2006 NH CX880

30’V 2861/2350

2001 NH TX68

24’

4400/3600

1998 NH TX68

24’

3700/2900

2019 Claas Lex 780TT V1280

180/30

2014 Claas Lex 780TT V1280

1306/722

2011 MF 9280 Delta 30’PF

1130/949

2015 CR9090

Approximate hours pre-harvest some machines will be hired for 2020 Harvest

01733 841932

www.aphltd.co.uk

HIRESALESSERVICEPARTS

steelwork, eaves beams, purlins & bolts

All sizes available – made to order

www.kitbuildings.co.uk

BOILER PLANT, HEATING & OVENS GRANT Vortex Pro external 15/26 central heating boiler, kero, 88700 BTUs, 4yrs old, perfect condition, with 1200L plastic fuel tank, this is an outside boiler. £1,560. P Scales Tel 07840 319819/01279 730168 (Essex)

1995 Claas Dominator Mega 208, 3700hrs, hydrostatic trans, air con cab, chopper & chaff spreader. 20' header with trolley, detachable rape extension, 3 electric side knives, box of spares & accessories, barn stored & serviced annually. £32,500+VAT. S Skinner Tel 07790 987130 (Northants)

35’V 1420/1178

KIT BUILDINGS

MONOSEM Meca 3 beet drill, 2004, 12 row, hydraulic folding, applicator, tungsten coulters, only 75ha since testing & maintenance by Ben Burgess, excellent condition. £10,250+VAT. A Maddever Tel 07899 665180 (Suffolk)

POA

to fit new Holland TX/CX

10-71759

£5,500 + VAT

NEW Holland TX32 combine, self levelling sieves, 13' header with trailer, on farm since new & owner driven, G reg 1990, 4087hrs, maintained to high standard & in very good order. £12,500 ono. More photos/videos on request. R Copley Tel 07814 499124 (Notts)

ROOFING, CLADDING & INSULATION MATERIAL

08-71433

19” mini singles

METAL SHEETS

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Recently converted

10-72504

CONCRETE panels for sale, second hand, approx 60 L-shaped, 8' high, 3' wide. B Beesley Tel 07803 266361 (Leics)

MASSEY Ferguson F 7244 Activa combine, 55 reg, 18' conventional header & trailer, FM small farm only done 664hrs, vgc. £41,000. A Dunham Tel 07767 248412 (Cambs)

APPROX 300 house bricks. Offers. N Ward Tel 01733 210366 (Lincs)

USED galvanised corrugated iron, 10’ x 2’ cover, plus 2 x 6’ galvanised ridge covers. P Waspe Tel 07462 472289 (Suffolk) CONCRETE blocks (40), 9" approx. Offers. N Ward Tel 01733 210366 (Lincs) APPROX 1200 handmade red clay roof tiles, single nib, 10.5" x 6.5", ideal for restoring tudor or similar type roofs. 50p each. E Calcott Tel 01827 62265 (Staffs)

WOODEN railway sleepers, can load our end but unable to deliver, approx 75, happy to sell in multiples or in one lot. £12 each. J Heath Tel 07770 996502 (Staffs)

ZURN mechanical side knife, drives off main knife, no motors to go wrong, will fit John Deere 600 Series header, good working order. £450+VAT. R Kerr Tel 07531 574681 (Essex)

CLAAS Senator 60, 10' cut, 1980 W reg, 1900 engine hrs, straw chopper, excellent condition. £4,000 ono. M Mendham Tel 07759 892707 (Norfolk) 16-FOOT knife for a Massey Ferguson 7345S combine, 2012. £150. R Sinkler Tel 01377 270251 (E Yorks)

144 www.farmads.co.uk June 2020

fg_class_june_20.indd 144

21/05/2020 16:30


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196 72474

Please contact William Randell

07887 714430 william@randells.net

Agriculture Ltd

Kongskilde Vibroflex 7.4m 2012 with front discs & rear steelflex packer £12,000

Horsch Tiger 8MT 2012 primary cultivator in excellent condition not to be missed £42,500

JCB Fastrac 8330 Pro (335hp) 2017, 70kmh, front linkage, 710 rears, 6000hrs, immaculate £95,000

Nissan Navara 2017 top spec Tekna model with rear matching canopy, red, 65,000 miles, FSH £18,000

Sumo Trio 3m mounted shear pin legs, headstock upgraded to Cat 4

Choice of 400 and 500 Vaderstad TopDowns

535-95 JCB Telehandler 2001, in excellent working order, 7000hrs

£8,000

POA

£15,000

Vaderstad Rapid RDA800S choice of machines reconditioned, one with 3rd row coulters POA

Further details of our machinery stock can be found at

www.randells.net

Viewing is by appointment only due to machines being in various locations

OSG Agri Hire Ltd is a family run business based on the Hertfordshire/Essex border, providing trailer hire, tractor hire, contract bale chasing and other agricultural services Get in touch with us today to discuss your requirements and discover the advantages of working with OSG Agri Hire Ltd JCB 4220 FASTRAC HIRE

- Available with or without an Operator - Available on Short Term or Long Term Hire DISCOUNTED PRICE FOR JUNE & JULY PERIOD

TRAILER HIRE

OSG CONTRACT BALE CHASING CONTRACTING WORK

- 18t/16t Grain & Silage - Experienced Contract Bale Trailers Chasing Service operating - 18t Dump Trailers across East Anglia - Flatbed Trailers - Using 2 QM Extra Heath DISCOUNTED PRICE bale chasers & 2 JCB Fastracs - Bale sizes: 3 x 4 FOR JUNE & JULY - Priced on a per bale basis PERIOD

Buy and sell online — www.farmads.co.uk

Philip Watkins 4m 8 leg trailed combination subsoiler on Simba legs with Opico seeder excellent £22,500

Vaderstad RD500P with system rigid tine, requires minor attention, set to 4.8m for 24m tramlines £4,000

- Hedgecutting Services (7.5m reach hedgecutter inc 1.6m head & verge cutting equipment) - Slurry Tanking - Trailer Work - Land Work Applications

Please contact OSG Agri Hire for more information 07804 823484 • 01279 815319 • e: ollie@osgagrihire.co.uk • www.osgagrihire.co.uk

72491

June 2020 www.farmads.co.uk 145

fg_class_june_20.indd 145

21/05/2020 13:12


71410

1986 JCB 3CX 4WD

COMPRESSORS

01763 780440

email: jmtengineering@btconnect.com • www.jmtcombinehire.co.uk

13-72601

and many other wear parts

JMT Engineering (Ladbroke) Ltd

£9,750+VAT c/w 4 in 1 bucket, pallet tynes & Extradig

sales@oakfields-ag.com

Simon Smith Plant Repairs Ltd Agricultural & Plant Repairs Leicestershire based 07730 009965 Mobile Breakdown & Repairs Servicing & Maintenance of all types of plant Air Conditioning Service & Repairs Hydraulic Overhauls Welding Repairs & Fabrication Full Workshop Facilities

Contact James French

07764 873486

jamesfrench328@gmail.com

DRILLS

72419

ROAD compressor, owned & used for last 8yrs on poultry houses/ machinery, Deutz air cooled engine, gwo. R Pilch Tel 07876 336041 (Norfolk)

TRACTOR earth scoop, as new. £375. M Robson Tel 07967 139678 (N Yorks)

COMBINES & HARVESTERS (cont)

CROP PROTECTION

JOHN Deere 9780 CTS 625 combine header parts – knife sections, chopper blades, finger sections, lifters, retractable auger fingers, chains belts, few filters – some new & some used. £500+VAT + postage. R Kerr Tel 07531 574681 (Essex)

NEW Holland CR9070, 2013, on 24" Smartrax, in superb condition, 1150 drum hrs, 1450 eng hrs, 30' Varifeed header, auto steer & hyd side knives. £126,950+VAT. J Furness Tel 07973 843230 (Glos)

PORTEK Scatterbird Mk2 bird scarer, c/w gas cylinder, battery & charger. £120. R Sinkler Tel 01377 270251 (E Yorks)

NH TX34, 1991, Ford engine, 2655hrs, 17’ header, header trailer, air con, straw chopper, chaff spreader & side knife, stored in barn, owner driven, highly maintained, only on small farm, excellent condition, genuine. £16,000. K Cook Tel 01953 681201 (Norfolk)

Please call for more information

www.writtlefarmmachinery.co.uk

50HX 4WD DIGGER LOADER

POA c/w 4 in 1 bucket, Extradig & 3 rear buckets

MATROT electric rape side knives (2), good condition. £450 each or £800 for both. J Bloomfield Tel 07787 402329 (Suffolk) SHELBOURNE Reynolds rape swath machine, needs TLC. POA. D Leigh Tel 07502 661861 (Northants)

www.farmads.co.uk

07748 004794 01245 442224(T)

1986 MASSEY FERGUSON

sales@oakfields-ag.com

HYMAC 270 Ford backhoe digger, registered 16 Sept 1974, c/w buckets, pallet forks & pallet fork bag lift extension, running order, barn stored, good condition. £4,950+VAT. P Skinner Tel 07711 405100 (Northants)

The Sky EasyDrill Available from Writtle Farm Machinery

Versatile no-till & conventional disc drill with low power requirement

DIGGERS, DOZERS & DUMPERS

01763 780440

BISO 12V side knife, less than one season's use, very powerful. £495. M Collins Tel 07850 988808 (Suffolk)

TAKEUCHI digger, 2.5t steel tracks, ditching bucket & 18" digging bucket, starts & runs well, very strong, not sure of hours, no longer needed. £5,000. G Ulley Tel 07798 872221/01724 710718 (S Yorks)

15-72448

DOOSAN 2012 7/20 compressor, 2 tool, 480hrs, c/w pipe & hand lance, vgc. £2,450+VAT. R Chapman Tel 06860 401855 (Lincs)

COMBINE header side guard, slight damage, 1050 Vario. Open to offers. J Spinks Tel 07970 549009 (Norfolk)

MASSEY Ferguson 38 20' freeflow header with trailer, very tidy, always stored inside. £1,750 ono. R Hawtin Tel 07710 553842/01327 830614 (Northants)

KVERNELAND Accord TS 6m tineseeder, 2008, pre-em markers, steps, track eradicators, following harrow, very good condition. £13,000+VAT. R Chapman Tel 07860 401855 (Lincs)

13-72600

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

01926 614345

NEW Holland TF46 header, with 3.2m wide Shelbourne Reynolds pick up. £150. J Abbott Tel 07946 344324 (Lincs)

Roller shutter doors made to measure We also repair all types of industrial doors We can erect or make alterations to steel work for new door openings Call for free site survey

14-71439

Over 30 years’ experience

ROLLERSHUTTERDOOR SHUTTERDOORINSTALLATION SHUTTERDOOR DOORINSTALLATIONREPAIR INSTALLATIONREPAIR

HIREPARTSREPAIRS Lexion & Dominator We supply the following new parts combine hire CONCAVES RASP BARS BELTS Fabrication & repairs KNIVES CHAINS FINGERS Breaking 100s of machines FILTER KITS

DOORS

SITEMASTER DIGGER LOADER

MINI dumper, unused, excellent new condition, 250kgs, Call for details. £1,175. M Robson Tel 07967 139678 (N Yorks) MF50B digger buckets, digging buckets and ditching buckets. POA. D Leigh Tel 07502 661861 (Nor thants) DAEWOO Solar 130 excavator, 1999, 80% tracks approx, 9126hrs, A/C, quick hitch. £11,500. S Bartle Tel 07884 238552 (Notts)

JS160L 2001, very good condition, just serviced, runs very well, hydraulic quick hitch, also comes with 4 buckets, 2 digging buckets, 1 large volume bucket & a ditching bucket. Only £14,950+VAT. A Robinson Tel 07876 711477 (Beds)

VADERSTAD TopDown extension arm for Biodrill, c/w hydraulic pipes & electrics to fit TopDown, set of distributor seed heads. £450 ovno. D Wakefield Tel 07889 756705 (Cambs)

VADERSTAD Rapid 600S, 2012, 4850ha, centre tyre press, radar, offset rear packer wheels, rear fill auger, fully refurbished 2017 inc new tyres. £34,500 ono. A Whitehead Tel 07771 507279 (Norfolk)

146 www.farmads.co.uk June 2020

fg_class_june_20.indd 146

21/05/2020 16:41


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

LLANSILIN TRACTORS LTD

Selected

AGRICULTURAL ENGINEERS

01691 791460 MF 7716

01302 755725 www.amazone.co.uk

MF 5445

Dyna VT 2000hrs, 50kph, air brakes, Data 4, guidance ready

MF 7716 Dyna 6, 2017, 2700hrs, 50kph, air brakes, weights

MF 7618 2015, 3200hrs, Exclusive, f/linkage

MF 7618 2015, 2300hrs, f/& cab susp, 650 tyres

MF 6714S 2017, 1700hrs, 50kph, f/& cab susp, air brakes, 650 tyres

MF 6714S 2018, c/w loader, 1900hrs, 50kph, air brakes

MF 7626

MF 7619 2012, Dyna 6, 5800hrs, 50kph, air brakes, 710 & 600 tyres

MF 8690 2013, 4600hrs, f/linkage, 50kph, air brakes, 5 spools

MF 5475 Dyna 4, 2010, 6500hrs, f/susp, CCLS

MF 5445

Catros+ 7003-2TX – 2018

Cayros XMS – 2017

MF 4345

ex. demo, 5F, vari-width, slatted bodies, hyd. front furrow, trash boards, transport wheel, road lights, press arm.

2002, 4300hrs, 2 spools, air con

MF 6499

£44,500

£15,600

2007, Dyna 4, 5200 hrs, f/linkage, 3 spools

ex. demo, 7 m, DW 600 rollers, 510 mm serrated discs, hyd. depth control, front Crushboard, double guide wheels.

2006, 5600hrs, 50kph, Tier 3, f/& cab susp

MF 6497 2007, 9500hrs, 40kph, full susp, exc original cond

MF 6485 2012, 6400hrs, 50kph, transport spec, 4 spools, Data 3

£59,750 Ceus 6000-2TX – 2018

MF 6485 2006, Dynashift, 8000hrs, f/& cab susp, CCLS, 4 spools

MF 8480

ex. demo, 6 m, DW 600 rollers, front 510 mm discs, Super stone release tines, 80 mm C-Mix shares, smooth levelling discs, hyd. depth control.

£54,250 Cirrus 4003-2 – 2018

ex. demo, 4 m, ISOBUS, RoTeC pro coulters, 12.5 cm, front Crushboard, AmaTron 3, pre-emergence markers, LED work lights, TwinTerminal 3.0.

2008, 9800hrs, 50kph, f/linkage, f/& cab susp, very tidy

MF 8260 Xtra 2003, 4700hrs only, f/linkage, exc cond

Claas 640

MF 6499 2010, 4700hrs, f/linkage, 50 kph, air brakes

MF 6480

2010, 8700hrs, 50kph, air brakes, f/linkage

John Deere 6620

£45,500

Autopower, 8500hrs, f/links & PTO, TLS

2010, 4700hrs, 50kph, f/& cab susp

MF 5612 2015, 2400hrs, Dyna 4

Cenius 6003-2TX – 2017

Case MXM 175 2004 18 speed, cab susp, f/linkage, 7700hrs, exc cond

email: llansilintractors@hotmail.co.uk For a full list of our stock please go to www.llansilintractors.co.uk

ex. demo, 6 m, KWM Matrix rollers, Super stone release tines, hyd. depth control, 40 mm points, serrated levelling discs.

£5,950 Groundkeeper GH 1350 - 2018

ex. demo, 1.35 m cutting width, flail mower/collector, standard blades, hyd. hopper emptying, front castor wheels.

71752

The next best thing to a NEW Amazone - a USED one 71747

•Howard Pullen Machinery Ltd• MACHINERY BROKER, VALUATIONS and ADVICE • USED COMBINES WANTED NOW!

2000 CLAAS LEXION 460 6.6m AC header, 3D sieves, Quantimeter, chopper, chaff spreader £35,000

NEW GYRAX 2800 h/d 2.8m mulching topper, unique 6 bladed rotors mulch as they cut, extremely strong £5,950

2019 CLAAS VOLTO 130T 13m tedder,1 season in superb condition

2010 NEW HOLLAND 4050 1998 CLAAS LEXION 450 90hp 4wd vineyard tractor, V600 header, rape kit, A/C, 4200hrs 3500 harvest hrs

£22,000

£12,950

2008 CLAAS LEXION 550 2017 AMAZONE CAYENA 6001 7.5m Vario header, 3D, single tank, f/discs, f/harrow, Cemos, 1257 harvest hrs, GPS variable rate,1800ha excellent £83,000 POA HUGE SAVING

POA

JSM M9 9’ topper, tidy condition

£1,250

2013 AMAZONE ZAM 2701 24m hydraulic controls, in excellent condition, genuine reason for sale £3,950

2013 CHALLENGER RG645B 30m twin line boom, 3900hrs, 5000L, Topcon controls, hyd track adj, 2 sets wheels £80,000

2014 MAJOR GDX HD 9’ topper, shaft drive, in excellent condition

JOHN DEERE 1085 18’ header, tidy combine, in working order, 3800hrs

£2,250

Buy and sell online — www.farmads.co.uk

Dyna 6, 2014, 4600hrs, f/linkage & PTO, 50kph, air brakes

2012, c/w 946 loader, 3300hrs

£7,500

Billingshurst

07402 031199 CLAAS CORTO 250 3 drum trailed mower, in good working order

£1,250

PZ HAYBOB 300 tedder/swather, good working order

£1,100

e: howardjhpullen@gmail.com

howardpullenmachinery.com

2008 KUHN 7802 6 rotor tedder, in good working order

2015 WEST 3000 GALLON dual spreader, autolube, lid, good tyres, tidy condition, £3,500 choice of 3 £14,950

June 2020 www.farmads.co.uk 147

fg_class_june_20.indd 147

21/05/2020 11:52


71628

PROTECH

W&M Agricultural Engineering Oswestry • Shropshire • SY10 7JU

£1,850

Kuhn BKE 250

2014, 6600hrs, air seat, air con, boom suspension, pick up hitch, trailer brakes

2007, 2.5m flail topper

Vicon RO-C spreader 2 bag disc spinner, good condition

£1,750

£1,500

2012, twin swath discs, quick release blades, instruction book & spare blades, good cond, fully serviced

3yrs warranty, good finance deals

POA

NEW KRM L20 & L15s IN STOCK 0% Finance on 50% RRP

Lely 320M plain disc mower

FULL RANGE OF SIP PRODUCTS AVAILABLE

Merlo 32.6 Plus

POA

4.5m hydraulic folding slitter, good condition, done very little work

£4,300

£2,650

Browns

POA

£3,250

£1,650

WATSON SPIRAL BLADE AERATOR FOR HIRE

Browns 5.5m hydraulic folding New Holland 940 spring tine harrows conventional baler

NC 14T SILAGE TRAILER FULL SPEC IN STOCK

POA

Merlo 34.7 Plus

2011, as new condition, manual left/ 4700hrs, 2015 (15 reg), boom right border control, 6 arms per rotor, susp, PUH, 405/70-24 (new), fully 4.6m working width serviced, Lola certificate

2.4 m working width, 4 leg, 4 grass slitting discs, rear smooth roller

£18,750

Krone KW 4.62 4 rotor tedder

2.4m grassland subsoiler

POA

£3,950

£2,890

www.wm-agrieng.co.uk

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

All prices + VAT

8’ Merlo muck fork

KV tines, Merlo brackets, 2017, excellent order

01691 683825 • John Mottram: 07968 715 512 • Mike Worthing: 07709 089 78 • email: john@wm-agrieng.co.uk

For more info call Colin Blood on 07800 885075 or head office on 01623 847171

2013 MF 8670

2017 MF 7718

3667 hrs, 50 KPH, Dyna 6, Datatronic, 4x CCLS Spools, Hyd/air brakes, Cab and front suspension, Front PTO and linkage on joystick control, 540/65x28/650/65x38 all 40%, Multipad control, Extra lights, Phone on parrot, ISOBUS.

10021910 £49,750 W

10022177 £58,500 W

2080hrs, Dyna 6 transmission, 50kph road speed, 3.2t front linkage, 4 rear spools & 1 front, Hydraulic trailer brakes, Front and cab suspension, 650/65 R38 rear tyres with 60% tread left, 540/65 R28 front tyres with 60% tread left Air seat and Air con Radio, MP3, Bluetooth.

3011 hrs, Vario transmission, 4 rear spool valves, Front linkage with 1 front spool, Front & cab suspension, Air seat & Air conditioning, Air brakes, Radio, IF620/75R30 Michelins with 60% tread left, Guidance ready, Datatronic, Video, Isobus, One 250kg weight each side.

30023544 £56,500 F

30022493 £58,500 F

10023497 £82,000 W

Lely 240

Kuhn GA 4321 GM Single rotar rake

2012 Kuhn GA 4521 GM

Kuhn Rake, 4.5 metre working width, Single rotor, Masterdrive, 13 tine arms.

X Demonstrator, Square and round bale combination, Auto stop film tear, Film roll magazine for 8 rtolls, CCI50 Terminal, Safety Chain & Lighting 19.0/45 R17 wide wheels, little use.

Kuhn Combi 2135 Baler/Wrapper, 18 powertrac rollers, Opticut 14 knives, 2.30 mtr pick up Auto oiler, Bank greasing, Tandem axle on, 500/45x22.5 Tyres, Nett binding, 10x plastic rolls carriers, Done 4 seasons.

30022657 £4,250 F

10021233 £3,500 W

10021578 £32,750 W

30023466 £32,500 F

3988 hrs, Warranty until 11/6/2020 or 5000 Hours, 50 kph, 4 Spools (2 electric fingertip & 2 mechanical), 520/85 R42 Mitas tyres with 95% tread left, 420/85 R30 Mitas tyres with 40% tread left, Front linkage, Data 4 screen, ISOBUS.

New still in the box Lely 240 Mower conditioner.

5071 hrs, Vario transmission, 6 rear spool valves, Front linkage with 2 front spool, 600/65 R34 BKT with 75% tread left, 710/75 R42 Trelleborg with 50% tread left, Front & cab suspension Air seat & Air conditioning.Air brakes.

Master drive system, Cat 2 linkage,Tandem axle, 4.20 working width, 12 arms, 4 tines per arm Farmer use ,not been used for last 2 years, Done less than 200 acre.

20020319 £7,500 F

2017 MF 7718

2016 MF 8730

2015MF7720

Kuhn SW4014 Wrapper

Kuhn Combi 2135

148 www.farmads.co.uk June 2020

fg_class_june_20.indd 148

20/05/2020 15:02


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

KOCKERLING 10m Triathlon/ Jockey, 2013, 6000ha, used as drill or cultivator, 9m or 10m, 4000L hopper, levelling boards, pre-em markers, good packer, drills over 200 acres a day, good condition, more photos can be sent. £40,000 ono. J Speirs Tel 07979 463480 (Beds)

FALCON 32SC seed drill, genuine old drill, but is in gwo, Stafford. £525 ono. J Heath Tel 07770 996502 (Staffs)

VADERSTAD Rapid RDA600S, 2019, reinforced tyres, bout marker, pre em markers Gateway & Isobus, system disc aggressive crossboard, E Control (iPad Air & E keeper), 3 tramline valves *2, hinged top screens, seed eye system seed counting. £79,500 ono. D Wakefield Tel 07889 756705 (Cambs)

EQUESTRIAN

MASTER 120 mobile grain dryer, diesel kerosene burner. P Webster Tel 01704 893162/07900 286419 (Lancs) 22-72436

Similar to the Farmer 80, but the Multi will take taller wire up to 125mm, as well as rabbit netting. With the adjustable arm, other options inc single & double strand barb attachments, re-rolling machine, hoist & loader/ telehandler bracket adaptor. John Brewer 07966 285240 johnquickfencer@yahoo.co.uk

18-71768

LELY 4m piggyback drill, Suffolk coulters power harrow available if required, also a spare drill for parts. £1,250 for drill. J Headland Tel 07980 983620 (Notts)

MULTI 125

METAL gate, 16'. Offers. N Ward Tel 01733 210366 (Lincs)

DRILLS (cont)

www.quickfencer.com

OAK gates (2), one 3' & one 10'. Offers. N Ward Tel 01733 210366 (Lincs)

TRAFALGAR PC500H swivel paddock cleaner, ball hitch, jockey wheel, tips to unload, ideal for horse paddocks, Alpacas, leaves, etc, excellent condition & good working order, cost over £3k new, bargain. £1,250. S March Tel 07860 835995 (Essex)

Alvan Blanch|Allmet|Carrier| Svegma|Farrell|Bentall|Wilder| Vertec|Turner|Tornum|Turbodan|

FOR SALE

& RAILWAY SLEEPERS

HATZENBICHLER seeder, mounted to an 8.3m roller, with pipes & distributer plates, control box, bought with roll, buyer to dismantle. Open to offers. P Gibbs Tel 07967 626527 (Worcs)

Northants

07813 182054 01536 771246

for bushel weight improvement

OLIVER GRAVITIES CRASH barriers, selection of sizes, W section 3.4m @£16 each, 4.3m @£20 each, 5.3m @£30 each & box section 4.8m long @£32 each, all +VAT. C Wisson Tel 01480 830224 (Cambs)

FORAGE & SILAGE

GENERATORS

TECHNEAT Terracast V2 seeder, electric fan & 5 pipe manifold. £1,500+VAT. W Gilman Tel 07736 361376 (Rutland)

Main Agents for

CAD ASPIRATORS

WHEAT straw in 3x4 Hesstons, heavy & good feed quality. R Lane Tel 07831 615912 (Cambs)

FOUR galvanised cattle yard gates, 14'6" in length with some corrosion on bottom rail. £25 each. T Crosby Tel 01245 320242 (Essex) AS new 12' wooden farmyard gate with all bright steel fittings, vgc. £120. Could deliver. J Fox Tel 07732 593378 (Suffolk) DEER netting, 1.8 x 100m, 50 x 50mm holes, new unused. £80+VAT. P Carr Tel 07773 753920 (Essex)

SEED & CEREAL ENGINEERING

www.usedcrashbarriers.co.uk

PLASTIC show jump cups with pins attached, various colours, new & unused. £4/pair. S March Tel 07860 835995 (Essex)

ELECTRIC fencing, including Hotline Gemini 40 dual-power energiser, 80 x 3' posts, orange polywire, power tester, bungee gate, insulators, etc, used once. £175. T Rix Tel 07713 470297 (Cambs)

FREESTANDING steel grain walling, 15' x 3' x 6' sheets & 30 base units, enough to form an L or T shape, all nuts, bolts & straining bars included, good condition. £600+VAT ono. J Cargill Tel 07754 793725/07745 457085 (Essex)

PLOT FEEDS 18-69868

VADERSTAD Rapid 4m system disc drill, recent new system discs & coulter discs. £8,000. P Adcock Tel 07770 602127 (Suffolk)

RINGFORT foal creep food feeder, 4 outlets, legs can be ballasted with sand/water for extra stability, nut or pellet feeds, 40kg capacity. £150+VAT ono. J Nott Tel 07957 146325 (Norfolk)

SHEEP hurdles (19), 6' long, hot dipped galvanised. £16 each. C Elmy Tel 01728 648680/07784 787762 (Suffolk)

MASSEY Ferguson 30 3m 23 row drill, 12/24m tramlines, eradicators, hydraulic markers, end tow kit & small seeds rollers, grain use only, various spares including tramliner rams. £1,250+VAT ono. A Hagues Tel 01482 875282/07413 770063 (E Yorks)

SERVICE, SPARES & REPAIRS ON OIL FIRED BURNERS

GALVANISED metal posts, approx 50, between 2m & 2.7m long. £4 each. T Rix Tel 07713 470297 (Cambs)

MOTORWAY

FENCING & GATES

KVERNELAND TS tine drill, 4.8m or 5m, 2014, on the farm from new, hopper extension, hydraulic fan, Isobus, pre-em markers, new points, brilliant drill, only selling due to change in farm policy. £14,000. O Gray Tel 07950 574653 (Lincs)

24 Hour call out during Harvest

CRASH BARRIERS

KUHN Megant tine drill, 2008, excellent condition, pre em markers, following harrow, half drill shut off, stored inside, handbooks & some spares. £10,000+VAT ono. S Russell Tel 07771 806831 (Lincs) WEAVING 6m tine drill, new type markers, PTO, fan in good working order, owned from new. F Johnson Tel 07840 215098/01767 654137 (Cambs)

01621 828689

www.kjengineering.com

GENERATORS: diesel & PTO, quality used & new, est 25yrs. JSP UK Ltd. Tel 01432 353050 Mob 07774 742182 (Hereford)

GRAIN HANDLING/ STORAGE FIFTY-FOOT 6” belt with 5.5” cups, for a grain elevator. £140. R Sinkler Tel 01377 270251 (E Yorks) AUGER 52’ x 6”, 3 phase, gwo. £950. S Bartle Tel 07884 238552 (Notts) KONGSKILDE for spares, no motor (3 phase 20t/hr, 63A 4 pin plug) 2m wide, on a trolley, cell wheel drive, standard with switch gear. R Rayner Tel 07808 066655 (Cambs)

NEW & SECONDHAND CLEANERS AVAILABLE CLEANER SCREENS available for most makes NEW & SECONDHAND DRYING FANS Carier Elevators Conveyors and Spares

sruption to UK Currently no di rted Equipment po Im or g in ad Tr

Contact Robin on 01472 753936 07710 242015

22-69858

SIMBA 3m Freeflow in good condition, used as OSR drill & strip till drill with option of fert/seed/slug pellets, but could be put back to original form, no welds/cracks, plenty of pics, price depending on what comes with it, very versatile drill. J Headland Tel 07980 983620 (Notts)

K&J ENGINEERING HAVE A HUGE RANGE OF BURNERS AND SPARES IN STOCK

Buy and sell online — www.farmads.co.uk

2019 4.8m Claydon Hybrid drill, with remainder of warranty, c/w pre-em markers seed harrows, winter/spring bean & cereal coulters, only drilled 110ha. A Wylie Tel 07870 928422 (Worcs)

WEAVING Sabre Tine, 6m, 2013, factory refurb 2016 when it had updated markers & front depth control wheels, new tines last autumn, 2170ha, pre em markers, Artemis Lite controls, GPS metering, £17,500+VAT. G Nichols Tel 07879 472607/07905 298223 (Cambs)

Roy Edwards 07702 408833 Full engineering, installation & dismantling services

www.grainmachinery.co.uk CHERRY Products 1t grain bucket, good working order. J Howard Tel 01994 419472 (Pembrokeshire) BENTHAM Simplex PTO fan. £225. J Ramsey Tel 01653 628366 (N Yorks) CRITTAL grain panels, 10’ long, vgc, 200 available. £30 each. We have corner post if required. S Hall Tel 07702 259355 (E Yorks) LISTER grain cleaner/dresser, 25t/hr dresser, inc dust & chaff extractor, 1t/hr gravity separator, can be seen working. R Rayner Tel 07808 066655 (Cambs)

June 2020 www.farmads.co.uk 149

fg_class_june_20.indd 149

21/05/2020 16:49


RUSSELL GROUP t: 07734 550 400 | 07792 927 432 sales@russells.uk.com

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

RUSSELL GROUP

Special offers weekly on FACEBOOK: #russellgroupuk

HUNDREDS OF ITEMS IN STOCK, VISIT OUR WEBSITE:

russells.uk.com | tractors.co.uk

New Holland T7.270

SN:41034481

£85,000

New Holland T7.270 Auto Command, 2019, 1170 Hours, Front Linkage and PTO with 2 MMV, 650/65R42 540/65R30 Michelin, AGR, Subsidised finance available.

New Holland T6.155

New Holland T7.270 T4B

SN:21031135

£75,000

2016, 2900 Hours, 50kph, CL4 Axle, 170L Pump, Joystick, 2xMMV, Front Links and Couplers, Climate Control, Cab Pack 2, 16 LED’s, Elec Mirrors, 710/70R38 600/65R28, AGR, ISOBUS Level

Case Puma 165

SN:91032711

£64,500

Case Puma 165 Classic spec, 2019, Range Command, 260 hours, 50 kph, front links,650/65 R38 Michelin 540/65 R28Michelin @ 95%, LED worklights

New Holland T7.210

SN:41031924

£57,500

New Holland T7.210 ,2016, Classic, T4B, Cab pack 2, 12LEDs ,f/links & PTO with services,3500 Hours, 650/65R38 @50%, 540/65R28@50% 50kph, full suspension YX66 FZF

New Holland T6070 Plus

New Holland CR9080 2009 c/w 30ft VF,trailer

SN:41031921

SN:11034303

£46,500

New Holland T6.155, 2016, Electro Command, 40kph, 3 remote valves, dynamic front fenders,passenger seat, carpet, twin LED beacons , standard rear fenders, cab suspension and front linkage 520/70 R38 80% 1900

£POA

New Holland T6070 Plus, 2009, 40kph, plus spec ,only 2450 hours, tyre at 80% 480/65 r28 and 600/65 r38 90mm lift rams no front axle suspension, cab suspension

SN:11034101

New Holland TD5020

New Holland BB890PC

Claas 3200

SN:11034158

SN:41034026

SN:41032551

£17,950

£75,000

£35,000

Krone Comprima

£32,000

SN:41034499

£13,500

New Holland TD5020, 2010, only 1000 Hours, Very tidy, tyres good c/w front linkage

New Holland BB890PC, 2017,packer cutter, tandem steering axle, air brakes, 560/45R22 service lights, elec bale length 11000 bale count

Claas 3200, 2009, tandem axle, electric bale length, moisture,hydraulic tailgate, rotor feeder

Welger RP535

JF FCT955

McConnel PA5565

Pottinger Novacat

SN:51034472

SN:21032922

SN:31027595

£8,950

Welger RP535 round baler, 2008, wide pick up, standard control box

SN:21031472

£9,950

JF FCT955 Trailed Forage Harvester, 2011 c/w rear hitch, spout

DEPOTS AT: YO17 | DL6 | YO51 | DN14 | DL8 | DE6 | NN14

£11,500

McConnel PA5565, 2016, 1.2m Head, Motion Controls

Krone Comprima F125XC Fixed Chamber Baler, 2011, 15,000 bales, drop floor, 17 Knife Chopper.

£10,950

Pottinger Novacat 307TED 3m Mower Conditioner, 2011, 3m working width, semimounted side pull, mower condtioner,wear skids.

RUSSELL GROUP & HALLMARK TRACTORS

150 www.farmads.co.uk June 2020

fg_class_june_20.indd 150

20/05/2020 15:04


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196 72375

John Deere S670i HM 2013

John Deere S685 HM 2014

John Deere S690i 2009

John Deere T670 LL 2013

John Deere T670 LL 2017

John Deere W330 2015

John Deere 9780 CTS 2008

John Deere 9780 LL 2007

John Deere 7300 SPFH 2003

Bailey 16T Silage trailer

John Deere 5430i 2013

John Deere XUV 855D 2013

JCB 4220 2017

JCB 4220 2017

JCB 531-70 Ag super 2017

Merlo TF42.7 2017

JCB 8014 CTS 2014

JCB TM320 2016

John Deere 6130R & loader 2016

Reco Sulky X36 spreader 2009

Cherry folding rolls

Dalbo rolls 6.3m 2008

JCB 541-70 2017

CAT TH336 2007

935/1442hrs, JD 625R 25’ header & trolley, 2630 screen, AT ready, SF3000, Prodrive, 500/85R24 & 680/85R32 £116,750

1379/925hrs, JD 630R 30’, header & trolley, AT ready, 2168/2805hrs, JD 630 30’ header & trolley, Prodrive, SF3000 & 2630, extra fine cut chop, extra large wire AT ready, ITC receiver & activation, harvest smart, concaves, 750/55R26 & 800/70R32 Michelin £139,750 harvest monitor, 800/70R38 & 620/75R26 £79,750

3450/2615hrs c/w 630A grass header, 650/75x32 & 480/80x26 £29,750

5’ sides, 2’6” silage sides, arched front window, extra 4638hrs, 32-18m booms, 2600 c/w AT acti & rear door lights, air brakes, mudguards, front flaps, SF3000, singleline 5 nozzles, pass seat, boom track, 560/60x22.5 - £17,950 380/90R46 £69,750

2796hrs, 4WS, F/linkage & PTO, air brakes, 1 Fr & 4 Rr 3579hrs, 60kph, 4 x scvs, road performance pack, Spools, PUH, beacons, road perf pack, field pro pack, hill hold & traction control, PUH & drawbar, twin BKT 540/65R34 £89,950 beacons, BKT 600/70R30 £79,750

only 1757hrs, canopy, 2 x buckets, blade, piped, Q hitch £7,995

7m, 24” plain rings POA

1928/2776hrs, JD 625R 25’ header & trolley, harvest monitor £62,750

4714hrs, hyd locking, Pin & Cone headstock c/w tines, twin aux, SRS, PUH, A/C, reverse camera, brand new Mich XMCL 460/70R24 £46,750

horizontal folding, 60cm dia rings with breakers, 11.5/80 x 15.3 tyres £5,750

40kph, 145hp, A/C, PUH, hyd Locking Q-Fit headstock & tines, SRS, 1 x AUX, brand new 460/70R24 tyres, JCB premier cover to 17/07/2020 or 3000hrs £51,750

1897/2411hrs, AT ready, premium chopper, 625 25’ premium flow header, side knives, trolley, 800/70R32 & 500/85R24 DUE IN

1645hrs, green/yellow, bull bar, glass doors, full cab, steel wheels, beacon, rear tow bar £8,950

2291hrs, turbo farmer, 40hp, cab & boom suspension, 40kph, PUH, Manitou carriage c/w tines, hyd locking, 2 Fr aux, A/C, brand new 460/70R24 £44,950

Buy and sell online — www.farmads.co.uk

456/645hrs, JD 625R 25’ header & trolley, AT & acti, 2630 265/396hrs, JD 314R 14’ header & trailer, HD straw & SF6000, harvest monitor, extra fine cut chopper & hyd chopper, 750/65 R26 & 420/65 R20 £64,750 chaff spreader, 800/70 R32 & 520/80R26 £169,750

1144/1565hrs, JD 625R 25’ header & trolley, AT ready, chopper & chaff, harvest monitor, 800/65R32 & 480/80R26 £109,750

Only 761hrs, 40K AQ, TLS, A/C, F/linkage & PTO, 4 x Tidy machine, 24-36m discs, c/w screen, Tribord scvs, cw JD 623R loader, Euro headstock, 114L/min limiter £4,500 pump, 4100 display, 650/60R38 & 520/60R28 £64,750

3448hrs, 145hp engine, 40kph, SRS, single AUX, Q-fit hyd lock, headstock c/w tines, PUH, A/C, brand new 460/70R24 £51,750

2410hrs, A/C, PUH, hyd locking, pin & cone headstock c/w tines, 1 AUX on boom, 460/70R24 £34,750

June 2020 www.farmads.co.uk 151

fg_class_june_20.indd 151

20/05/2020 15:05


Over 40 years’

GRAIN HANDLING/ STORAGE (cont)

experience specialising within the agricultural 01621 828689 industry www.kjengineering.com

MASTER Dryer 160D, all electric with quiet diesel burner, 1120hrs, 16t capacity, set up indoors since new, electric or gravity discharge, used once since serviced by Master. ÂŁ10,000+VAT. T Perry Tel 07814 936102/07812 179002 (Glos)

Grain store power including LED/ACCS lighting

RANSOMES R2250 Plus cylinder mower, 2009 model, approx 8' cutting width, showing 3500hrs, in very good order, ready to work. ÂŁ4,850+VAT ono. J Woodward Tel 07930 548933/01455 221112 (Leics)

Control panel fault finding New installation wiring or rewiring Security lighting

GRAIN tunnel, 30m, with above ground grain laterals for 30m x 9m oor, Lister diesel powered fan also available, good condition, can be dismantled into sections for transport. POA. M Sills Tel 07587 142844 (Suffolk)

Testing & Certification of installations for insurance purposes Testing & Certification for periodic or tenancy renewals

FARM King 6" auger, 11' long, Kohler petrol engine. Open to offers. A Dunham Tel 07767 248412 (Cambs)

All work carried out to

18th Edition

22-72120

• Fans – New & Reconditioned • Grain Stirrers • Air Tunnels • Laterals • Drive On Floors • Gas Burners • Controllers & ACCS Equipment

Pellcroft Engineering Ltd

Coningsby, Lincoln t: 01526 342466 f: 343507 e: sales@pellcroft.com

VICON RC300 hay turner, good working order. ÂŁ250+VAT. C Elmy Tel 01728 648680/07784 787762 (Suffolk)

GRASS MACHINERY LAINCHBURY Proctor grain dresser, been used to supply a 12tph continuous drier, c/w with screens for a variety of crops, 3 phase, North Lincolnshire. M Pilkington Tel 07973 730169/01427 752229 (Lincs) OPICO AND MECMAR driers bought and sold. Genuine parts available nationwide. Morgan Farm Machinery. Tel: 01604 780087 Northants(T)

CLAAS Liner 470, 2004, only raked 100 acres per year, always stored undercover, this machine is straight & correct in all ways, can be seen working. ÂŁ3,750+VAT. Delivery can be arranged. P Smith Tel 07801 674091/01908 569238 (Northants) MCCONNEL Rhino SP15 batwing topper, good condition. ÂŁ4,250+VAT. P Gibbs Tel 07967 626527 (Worcs)

HARVEST constant humidity controller, fan & electric box in gwo, missing sensor, needs some TLC but with a service would work ďŹ ne. ÂŁ500 ono. J Heath Tel 07770 996502 (Staffs)

KONGSKILDE grain silos (2). ÂŁ790+VAT. M Hodgetts Tel 07946 146395 (Worcs) MASTER grain dryer, 20t capacity, PTO driven, diesel ďŹ red, good working order. ÂŁ14,000. R Davy Tel 07762 164552 (Northants)

LARGE quantity of grain laterals, surplus to requirements, 3', 4' & 5' lengths available. From ÂŁ2 each. W Needham Tel 01234 711777/07768 721154 (Bucks)

RW Tomlin roller topper mower, 2.4m, 1st class condition. ÂŁ1,200+VAT. R Hopkinson Tel 07976 424263 (Lincs)

RECO Ferri 2.7m ail, recently had new blades, full width roller & rear wheels, hydraulic rear door. £2,250 ono. S Bartle Tel 07884 238552 (Notts)

VICON 2401 TC mower conditioner, untidy skirt, cut our grass last season, machine can be run up. ÂŁ2,450. R Morris Tel 01794 368191/07831 674522 (Hants) VICON Acrobat hay turner. ÂŁ75. T Rix Tel 07713 470297 (Cambs)

BRICE Baker 210t grain silos (2), one with stirrers & ďŹ xed sweep auger, & one with mobile sweep auger, 30hp Rekord fan, 2 Skandia conveyors, all in good order, dismantled ready for collection. ÂŁ8,000 ono. D Ellerbeck Tel 07759 744969 (Cambs)

LAWNFLITE Mini Rider ES model, powered by 190cc Briggs & Stratton engine, 1 lady owner, hardly used & in very good condition. ÂŁ775. M Robson Tel 07967 139678 (N Yorks)

www.pellcroft.com

ENTRECON disc & rope elevator – ideal for small sized animal meal. R Rayner Tel 07808 066655 (Cambs)

PERRY 60tph curved conveyor section, was used to incline a level conveyor 15 degrees to follow roof pitch. Offers. C Frampton Tel 07748 375665 (Somerset)

VICON Olympus 240 trailed mower for spares, all parts available, cheap. Offers please. R Hawtin Tel 07710 553842/01327 830614 (Northants)

PLASTIC hopper to ďŹ t end of an auger, etc. ÂŁ100. A Dunham Tel 07767 248412 (Cambs)

22-72437

22-72123

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Bespoke control panels or modification of existing panel

LELY Splendimo 320 centre pull mower conditioner, 2008, excellent condition. ÂŁ6,000+VAT. M Scrivener Tel 07921 921849/01525 240479 (Bucks)

TEAGLE Super Ted 160, good condition, always barn stored, rear door extension, castor wheels. ÂŁ1,200+VAT. D Coe Tel 07867 578854 (Suffolk)

LELY Spendimo 320, 3.2m mower, 2011, in good working order, new blades, used last season, very clean. ÂŁ3,850 ono. F Holohan Tel 07496 734212 (Cambs)

COUNTAX C600 H ride on lawnmower, 2010, 295hrs, hydrostatic 42� cutting deck with removable mulching plate, Honda V twin engine, powered grass collector/roller, owned from new, recent new blades & full service. A Bentley Tel 07957 553028/01603 879709 (Norfolk)

FERRI TP51 ail mower, 2005, gwo. £3,150+VAT. A Dunham Tel 07767 248412 (Cambs) VICON Haybob 300 hay turner, all gates good working order. £800 no VAT. J Almond Tel 07876 652079/01508 520879 (Norfolk)

KUHN GRS 25N tedder/rake, good overall condition, last used to rake up straw this summer, some spare tines included, low annual usage. ÂŁ1,100+VAT. R Kerr Tel 07531 574681 (Essex) ACROBAT PZ twin drum hay mower, PTO driven. R Rayner Tel 07808 066655 (Cambs)

McCONNEL pasture topper, good working order. ÂŁ550. A Campling Tel 07976 925715 (Lincs) CLAAS Volto 1320T tedder, trailed, 10 rotor, 13.2m working width, new tyres. ÂŁ11,500. L Rich Tel 07774 112211 (Glos)

FRANSGARD Westmac RV300 tedder. ÂŁ475+VAT. A Hawtin Tel 07738 951502/01327 350477 (Northants)

FLEMING at roll, has only done 50 acres from new. £3,300+VAT. P Burdett Tel 07976 525029 (Rutland)

152 www.farmads.co.uk June 2020

fg_class_june_20.indd 152

21/05/2020 16:57


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

Fenland Tractors

72416

Email julian@midlandsagriplant.com Office 01530

Mobile 07831

229686 113316

Finance & Part Ex Available

Limited

Station Yard, Postland, Crowland, Peterborough PE6 0JT Tel: 01406 330386 Fax: 01406 330080 Email: martyn.stanley@fenlandtractors.co.uk

Cat D6C 82A direct drive direct start 1967

Cat D4D 44H 1977, good UC tidy

Western 1100L Mobile Pressure Washer 2017, Yanmar diesel engine, had little use

TWB Terminator Cultivator 2014, 3m trailed, subsoiler legs, 2 rows discs, 850mm press

MF 8735 Efficient Tractor 66 reg, 825hrs, Dyna-VT, 5 year warranty, part-ex

Major 1700 Gallon Vacuum Tanker 2013, slurry or water for dust suppression, flotation wheels

Keeble Cultivator tines, subsoiler & press, very heavy duty, 95% metal

Barford Twin Axle Low Loader 2018, 19t, as new

Twose Grassland Subsoiler 2015, 2.5m wide, 3 leg, shearbolt legs, new metal

Western 2000L Bunded Diesel Bowser 2017, 12v pump, demo condition

Marshall 12t Heavy Duty Dump Trailer 2009, 385/65 x 22.5 90%, sprung drawbar

Dowdeswell DP 145 Plough 2013, 8 furrow, DDS bodies, new mouldboards ,Cat 4 headstock

New Maschio 2.5m Rotovator 2018, 540 PTO, mint condition

Ingersoll Rand/Doosan twin tool road compressors, 2011 – 2015, 839 to 1529hrs

Weaving Sub-Disc cultivator rape drill, 2011, 4m wide, guttler press, simple rape seeders

Cousins Type 28 Cultipress 2010, 4.6 m, new metal, 1st class condition

HeVa Hydraulic Folding Front Press 2016, 4m wide, mint condition

TWB 6m Surface Cultivator, Ideal to control black-grass, 2015, super condition

Spaldings 3.5m 7 leg Flatlift subsoiler, all new metal, excellent condition

Folding 14’ Silage Forks 2011 to 2020, choice of 5 units, from £4,400

BKT Flotation Wheels 2 x 900/60 x 42 98%, suit Fendt 900 series, MF 8000 series, as new

Complete Spreadwise Umbilical Slurry System little use, barn stored, suit new contractor starting up

Kverneland 4m Drill Combination 2014, Suffolk coulters, 800 acres from new

Kubota KX101-3 A3 2014, 1915hrs

Volvo ECR25D 2015, 1833hrs

McCauley A2GP12 dump trailer with HD ramps, new unused

Doosan DX85R-3 2014, 4831hrs

Volvo ECR28 2013, 2703hrs

Hitachi ZX130LCN-3 2013, 4072hrs

Buy and sell online — www.farmads.co.uk

Cat 312C 2005, 4137hrs, UC 70% very original & tidy

Suppliers of replacement parts for all Caterpillar machines DUE IN – Hyundai R60-9, Doosan DX63, Hitachi ZX50

Visit our website www.fenlandtractors.co.uk to see our stock machines

R.C.Boreham & Co New & Used Machinery

For all enquiries call: 01245 231320

ex demo, boom suspension, air con, air seat

Polaris Ranger Diesel

SPECIAL DEAL

2018, in good condition, full cab with tip out screen & heater, good tyres

£10,950

£42,000

Pottinger Novacat 301 Alpha Motion

NEW -conditioner, 3m 0% Finance

£8,750

Polaris Ranger Crew

diesel, 2015, 750hrs, 6350 miles, good condition, 6 seater, full cab with doors

Merlo TF33.7

2017, in good condition, air con, boom suspension

£1,100

Ritchie Aerator 2

2m grass slitter

£11,950

Pottinger TOP612C rake

NEW – steering axle, Multitast wheel, floatation tyres 0% Finance

£3,500

Sisis Powaspread top dresser

excellent condition, very little use, PTO drive

£2,100

Suire FT2700 flail

2.7m flail, heavy duty, front & rear mount

WANTED

High Quality Combines, Self Propelled Forage Harvesters, Ag Loading Shovels, Machinery & Plant

See website for more pictures & more stock Chelmsford, Essex CM3 1HU | rcboreham.co.uk | sales@rcboreham.co.uk

72483

Merlo TF42.7 telehandler

£10,500

72376

POA

www.midlandsagriplant.com June 2020 www.farmads.co.uk 153

fg_class_june_20.indd 153

21/05/2020 13:05


GRASS MACHINERY (cont)

HEDGING & FORESTRY

JF GMS 2800 mower conditioner, vgc, plastic tines, had little use, always barn stored. £4,500. L Rich Tel 07774 112211 (Glos)

STIHL MS230 16" bar & chain, never used or started, equivalent model today approx £500. To sell at £350. C Bigley Tel 01406 540505/07909 910005 (Lincs) BOMFORD B54MP hedge cutter, ring for details. £1,750. A Soames Tel 07970 505050 (Bucks)

LOW GRADE LAND REQUIRED for use as dog field for fenced in free run, agility, training, etc. Area required subject to price – Surrey, Surrey/Sussex or Surrey/ Kent border. Percentage of any income goes to rescue charity. No building permission sought. Contact Stephen Betts 07933 088808, email smjbetts@gmail.com (Surrey) LIGHT land required for free range pigs, 35–50 acre blocks, can fit into a crop rotation, good rates paid, North Norfolk & surrounding areas. S Walls Tel 07778 564989 (Norfolk)

CUB Cadet GT1223 with 50" cutting deck, 123hrs, Kohler engine, gwo. Call for info. £1,275. M Robson Tel 07967 139678 (N Yorks)

LIVESTOCK

TWOSE TF500, 2010, 5m reach, slewing reverse rotor, cable controls, good condition. £5,500. R Worboys Tel 01284 789241 (Suffolk) TWYMAN Clipper 300 flail topper, hydraulic sideshift, rear roller, 3m wide, good flails. £2,500+VAT. Grendon House Farm Tel 07970 658813 (Warks) VICON Acrobat. £100. J Ramsey Tel 01653 628366 (N Yorks)

RUNNER ducklings, 7 available, couple of weeks old, will be off heat, sold unsexed. £6.50 each. S Ramsey Tel 01653 628366 (N Yorks)

ECON gearbox pump for HM2 hedge cutter. POA. D Leigh Tel 07502 661861 (Northants)

THREE pedigree Limousin bulls, easy calving, quiet temperament, from a closed herd. K Knight Tel 07810 553957 (Norfolk)

IAE calf creep, heavy duty, in very good unmolested condition with little use, has 3 point linkage & fork slots. £500. S Flack Tel 07725 201086 (Suffolk) PEDIGREE Limousin bulls, 2yrs old, quiet, closed herd, choice of 3, ready for work. J Styles Tel 07884 198642/01508 531049 (Norfolk)

IRRIGATION/ DRAINAGE

Concrete Gullies & Lids OPICO 5m grass harrow, needs a few new tines & two wing pivot pins, also needs some weld on two of the tine holders. £1,850+VAT. Grendon House Farm Tel 07970 658813 (Warks)

FARM-TEC 1.25m flail mower, only used twice, as new condition, 540rpm 6 spline PTO, Cat 1 linkage, suits compact tractor, ideal for equestrian/smallholding. £850 ono. P McCann Tel 07970 516771 (Essex) JOHN Deere 160 ride on lawn mower, 42" cut, petrol, gwo. D Leigh Tel 07502 661861 (Northants)

RECO Ferri 2m flail mower, left hand offset, working order, headstock & gearbox good, but hood in poor condition. £250. G Grant Tel 07919 811809/07836 799801 (Lincs)

LELY Splendimo 3.2m straight mower, 2008, one farmer owner since new, barn stored, 2 swath wheels, skirt in good condition, new blades, good condition & ready to mow. £3,500 ovno. A Westaway Tel 07977 575825 (Devon)

KUBOTA F2880 4x4 ride on mower, 2009, 60" side discharge cutting deck, in very good working order, just had full service including new blades, road registered, can be seen working. £5,000 ono. F Holohan Tel 07496 734212 (Cambs)

£120+VAT each x10 available

Andrew H Gemmill 07767 891328 01702 202930

BUTLEY Herefords registered pedigree bulls & females, quiet & easily handled, all bulls halter trained & guaranteed under Hereford Society rules, TB4 area. www.butleyherefords.co.uk. DC Smith & Sons Tel 07971 694912/07885 594143 (Suffolk)

GATERIDGE Aberdeen Angus bulls for sale, Farm Assured – SAC Health scheme, closed herd, ready to go to work. A Thompson Tel 07836 246392 (Northants)

26-72471

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

PZ CM170 drum mower, good working order, can be seen working, barn stored. £750+VAT. C Elmy Tel 01728 648680/07784 787762 (Suffolk)

LAND/PROPERTY

SHELBOURNE Reynolds 13cu/m Powermix Pro diet feeder, excellent condition. £6,750. H Bullock Tel 07543 264975/07900 652633 (Suffolk) POTTINGER Eurohit 54N, in very good condition, always stored under cover out of season, owned from new, I have never replaced a tine. £3,000+VAT. N Ridley Tel 01233 770435/07802 695311 (Kent)

PZ CM170 mower, good working condition, last used 2018, slight damage to plastic guard, instruction manual & box of new blades included, always stored undercover, Landbeach. £1,200 ono. P Hatley Tel 07763 351439 (Cambs)

SPEARHEAD Q2500 HD flail mower, 2.5m cut, good working order. £1,800+VAT. I Cowell Tel 07788 985544 (Essex)

PRIME irrigation reel. £ 9,000. P Adcock Tel 07770 602127 (Suffolk) NURTINGER piglet rescue unit. £100. B Brown Tel 07768 038369 (Cambs)

KASKAD Irrigator 90/370, in good working order but it needs a bit of work doing on it, the pipe needs retiming, all parts are with it, pipe is in good condition, 90mm pipe, 370m long, not been used for a while, no frost damage. £3,850+VAT. A Lyle Tel 07889 303809 (Lincs)

WRIGHT Rain irrigator 110/420, in good working order, very little wear on pipe, gearbox has been resealed, 110mm pipe, 420m length, no frost damage. £4,750+VAT. A Lyle Tel 07889 303809 (Lincs)

GLOUCESTER Old Spot X Tamworth weaners, 10wks old, good strong pigs, outdoor reared. £30 each. N How Tel 07714 240064 (Northants) SUFFOLK shearling rams from accredited flock, all fully vaccinated, wormed, etc, good strong animals, Suffolk/Essex border. J Wolton Tel 07920 772862 (Essex) NINE quality equipment Jetmix pig feeders, excellent condition, clean, looking like new. £100 each. J Rice Tel 07759 650475 (Suffolk) LARGE White X Duroc boar & Pietrain sow for sale, sow 3 months in pig to 5th litter. £300 for all; fat pigs 70–80kg, progeny of above. £1.20/kg LW. R Cosgrove Tel 07841 372169 (Suffolk) EIGHT Texel X Lleyn shearling ewes & 2 Texel X 4yr rams. R Lees Tel 07748 336040 (Essex)

TWO 9' galvanised feed troughs, suitable for cattle/sheep/goats, in very good condition. £40 each. T Crosby Tel 01245 320242 (Essex) SMALL pig or chicken hoppers. £5 each. G Meadows Tel 07951 111182/01728 660577 (Suffolk)

PORTEQUIP calf creep feeder. £450+VAT. P Burdett Tel 07976 525029 (Rutland)

POLLED pedigree Hereford bull, quiet, great length, dark bull with good shape, 17mths old, ready for work, lovely looking bull, good pedigree, great sire & milky dam; also 2 other 16mth old bulls available, BVD accredited free & TB4. J Speirs Tel 07979 463480 (Beds)

154 www.farmads.co.uk June 2020

fg_class_june_20.indd 154

22/05/2020 08:49


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

M.S. JOHNSON ENGINEERING

Cultivating The World

L T D

AGRICULTURAL SALES, RESTORATION, FABRICATION & REPAIR

S

RE CE

S

R CE ES

ES

0789 9870 821 martin@msjohnsonengineering.co.uk www.msjohnsonengineering.co.uk

BUY ONLINE DELIVERY AVAILABLE SAFE HANDOVER

Buy and sell online — www.farmads.co.uk

All prices are excluding VAT and shipping.

R CE

ES

ES

Based in Cambridge

RE CE

S

RE CE

R CE

R CE

M.S. Johnson Engineering Ltd is the main agent for TAFE Tractors and a dealer for Ceres machinery in East Anglia.

Tractors

Visit us online today at

farolmowers.co.uk June 2020 www.farmads.co.uk 155

fg_class_june_20.indd 155

20/05/2020 15:08


01767 677316 01536 373238

Fax: 01767 677451 Fax: 01536 373392

A PO

A TBE VKM BP flail mowers IN STOCK NEW

Kuhn GMD 240 NEW

NEW

NEW

EX DEMO

2, £2 PO A

75 £1

4,

25 4, £2

£2

5,

00

Kioti CK2810H c/w loader

Kuhn Optimer 6m

NEW

NEW

,7

£1

£2

4,

PO A

80

50

0

Case IH MXM 190 Pro 2007, 50kph, 5425hrs USED

Case IH 2188 1996, 20’ header OSR ext USED

0

Kuhn LSB 1290 iD baler

0

Kuhn GA6501 rake

0

Kuhn GF 502

Case IH 2188 1997, 20’ header, OSR ext USED

00

A PO

A PO

PO

A

0

NEW

A

PO

Kuhn 40.2 50.2 S6 NEW AVAILABLE FROM STOCK

PO

A PO Kuhn GA 4321

PO

A

85 4, £1

Case IH Farmlift 742 2019 EX DEMO

A

40.2 H-EMC 2016 & 2017 NEW

PO Claydon 4m Hybrid drill EX DEMO

Abbotsley Brigstock

2

00 ,0 68 £1 Case 8240 2015, 35’ header, 690 rotor hrs USED

PO A

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

A B

Kuhn Performer 4m

Kuhn Performer 6m

Bomford kestral EVO 5.7 S

Bomford 270 twin Blade

NEW

EX DEMO

NEW

NEW

www.collingsbrothers.co.uk email: jason@collingsbrothers.co.uk

70426

Please visit our website to view our full range of new and used machinery available

156 www.farmads.co.uk June 2020

fg_class_june_20.indd 156

20/05/2020 15:09


S.R. Haylock Eves: 01799 Daytime: 07831 or 07766

Agricultural Machinery For Sale Cambridgeshire

72525

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

584626 158848 107610

John Deere 6210 4wd, A/C, Powerquad, 8000hrs, 02 reg, vgc

Claas Dominator 86 combine tidy condition, A/C, chopper, 15’ cut

Manitou 629 loadall Farm spec, 2004, very good tyres, tidy

AS Marston 8t Ace grain trailer hyd back door, tidy for age

International 685XL 2wd, tidy for age, 7500hrs, T/A working

Claas 945 pivot steer loadall Perkins engine, PUH, good tyres

McConnel 4.6m trailed batwing mower tidy condition, lights

NEW BAILEY 20T TRI-AXLE BAILEY TB14 SILAGE TRAILER BEAVERTAIL LOW LOADER 5’ sides, sprung d/bar, 560/60x22.5 air brakes, 435 tyres, hyd ramps wheels, oil brakes, rear d/bar

2014 JD 6170R TRACTOR TLS, 50K, autotrac ready, Starfire 3000, touch screen Command centre, 650x42 & 540x30

2009 AS MARSTON ACMT 16T TRAILER 550/45x22.5 wheels, g/chute, sprung d/bar, sheet

NEW SETS OF CEAT WHEELS 500/45x22.5, 560/45x22.5, 560/60x22.5, 8/10 stud

NEW BAILEY 15T FLAT DECK LOW LOADER air brakes, 435 tyres, aluminium ramps

2014 KUBOTA L4100 HST 4WD TRACTOR 900hrs, turf tyres, roll frame, front weights

2018 BAILEY 14T AG DUMP s/drawbar, S. singles, as new, used 6 times

2015 BAILEY 18T BEETEAPER air brakes, 560/60x22.5 floatations, rollover sheet

2016 BAILEY TB16 SILAGE TRAILER air brakes, 560/60x22.5 wheels, full spec, very nice

2010 MAJOR 8000L VACUUM TANKER PTO pump, floatation tyres, pipes

NEW BAILEY TB24 24 T TRI-AXLE SILAGE TRAILER full spec, air, 560/60x22.5 wheels, ex stock

Please see website for more pictures:

www.srhaylock.co.uk

Reynolds Motors Cromer • Norfolk

70996

BEET CLEANERS – CHOICE OF CTM & TODD Precleaner or roller table with picking tables, etc BEET DRILLS – CHOICE OF 6 & 12 ROW Monopill, Monosem, Kleine & Stanhay BEET HOES CHOICE OF 6 & 12 ROW HYD FOLD Standen • Househam• FMA 6 METRE FRONT STEERING PRESS HYD FOLD Edlington 6.5m hyd folding rolls with breaker rings TERRADISC CULTIVATORS 3 & 4M Dutch & combination harrows 3 to 6 metre + 3m germinator KV LD85/300-9-HD PLOUGH 5+1 VARI WIDTH Opico 3m grass topper KEEBLE 6M HYD FOLD CULTIVATOR/SUBSOILER 16 h/d cultivator & 9 subsoiler legs hyd levelling tines & hyd packer roll KUHN AXIS 40.1W S6 3000L HC FERT SPREADER Claas 105 combine 17’ Merc/Hydro & chopper barn stored v tidy FLAT LIFTS – SUBSOILERS 2 TO 5 LEG 45’ tri-axle artic trailer on air for straw, etc 8T BULK BLOWER TRAILER PTO DRIVEN 10t flat trailers, 25’ twin axle 10T BUNNINGS MUCK SPREADER WITH R/DISCS Tipping trailer 3/4t with steel grain body 10T MARSHALL 25’ FLAT TRAILER HYD BRAKES Choice of low load single axle drill trailers 14T RICHARD WESTERN ROOT CROP TRAILER Air/hyd brakes sprung drawbar hyd tailgate roll sheet 50’ NEAN COMBINE/MACHINERY TRAILER full MOT wells & outriggers on air with rear lift

WANTED s/beet drills cleaners & trailing tanker harvesters 2 & 3 row

Mob Tel

07836 643155 01263 833281

2016 CASE PUMA 150 3350hrs, 50k, air, front & cab susp, balance of 5yr, 3000hr warranty

NEW BAILEY 14T X 28’ BALE/ BOMFORD RS18 ROTARY TOPPER PALLET TRAILER 540 PTO, very little used sprung d/bar, air brakes, s/singles

NEW BAILEY 16T SILAGE TRAILER air brakes, 560/60x22.5 wheels, full spec

2016 BAILEY 18T BEETEAPER air brakes, 560/60x22.5 wheels, arch window

2012 JCB 515/40 COMPACT FORKLIFT 2700hrs, A/C

NEW & USED TYRES & WHEELS in stock at all times, ring with your requirements

FENDT 456DN FORMER SINGLE ROTOR RAKE hardly used, demo condition

NEW BAILEY 4T CONTRACT DUMP TRAILER

SEE WEBSITE FOR MORE PICTURES & OTHER STOCK

Buy and sell online — www.farmads.co.uk

Massey Ferguson 240 2wd, 3900hrs, tidy for age, PUH

Case 895 XL 2wd. c/w Trima loader, 6500hrs, A/C, very tidy

“Anything Agricultural”

70444

email: dasservices@btconnect.com website: dasanythingagricultural.co.uk

Main Dealer for TRAILERS

Dean: 07836 680004 Peter Scott: 07584 066866 Office: 01522 754733 June 2020 www.farmads.co.uk 157

fg_class_june_20.indd 157

21/05/2020 14:10


Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

71758

M

A

W

KVERNELAND TAT8576 6 ROTOR MOUNTED TEDDER

Stk No 81051223

£8,500

JD 451M BALER KVERNELAND 9032 SINGLE 2018 – 4536 bales, 2.20m pickup, ROTOR MOUNTED RAKE compressor shield, 500/50-17, net only, straight hitch w/ball joint, discharge ramp Stk No11049172 £25,000 Stk No 31049429 £3,675

A

W CASE 9230 AXIAL FLOW COMBINE 2013, 1864 eng/1449 drum hrs tracks 50%, r/wheels 600/65R28 80%, Egnos integrated steering system, folding spout, AFS system, self lev sieve, changeable concaves, 35’ header, 2 side knives varifeed (2014) Stk No 21054218 £130,000

W

R

CAT MT845B 2006, 8264hrs, Powershift, 50% track condition, 4 electric SCVs Stk No 41056691

£50,000

W

GREGOIRE-BESSON RB6 6 FURROW (5+1) PLOUGH 2017, No6 bodies, mixed skimmers, rear disc, depth/ transport wheel Stk No 81046236 £12,995

Stk No 21056739

Stk No 21047220

JOHN DEERE 6145R 2019, 795hrs, Direct Drive 50kph, Premium cab with Command Arm, 650/65R42 - 540/65R30, autotrac ready, 4 electrical SCVs Stk No 81052184 £90,000

JCB 535-95 2016, 1326hrs, 6 speed 40K, 500/70R24, Q-fit carriage, boom suspension

Stk No 11054924

Stk No 21055899

Stk No 11056180

£56,000

MAZZOTTI 3180 2019, 85hrs, 3200L tank, 12/24m boom, individual nozzle on/off, hydrostatic 50 kph trans, 4wd, 4 wheel susp, 340/85R46 & 600/60R34 Stk No 11052190 £180,000

H

HIRE 01728 628325 Mark Debenham 07710 148420

M

MAULDEN 01525 405848 Gary Buckle 07712 556387

C

CROMER 01438 861257 Robert Vigus 07712 556389

G

GROUNDCARE 01206 230283 James Tuckwell 07932 107618

S

SUDBURY 01787 374100 Paul Coffey 07766 225174

R

CAT MT765D 2013, 3750hrs, Powershift, 50% track condition, 5 electric SCVs, Trimble guidance Stk No 41056692

£70,000

W

MANITOU MLT627 2009, 4500hrs, Manitou hydraulic locking carriage, trailer brakes, air conditioning, air suspension seat, wheels 17.5R25 Stk No 11054921 £20,500

Prices do not include VAT

£16,500

R

W

JCB 531-70 2017, 4791hrs, 40kph limited slip differential front axle, 460/70R24, Q fit carriage

£42,500

£24,000

W

MANITOU MLT735-120 2012, 2875hrs, Powershift 40kph, 460/70R24, Manitou hydraulic locking, carriage, boom suspension, PUH

£27,750

KVERNELAND LD85 - 300 6 FURROW (5+1) PLOUGH 2018, skimmers, rear disc, depth wheel

W

A

M

VADERSTAD RST630 2012, 3 row raptor tines, levelling board and cast press wheels

C

HOUSEHAM 2006, 6560hrs, 3000L tank, 4 section 24m boom, 4 wheel steer, 600/60R28 Stk No 11055665 £25,000

D

MANITOU MLT735-120 2010, 3900hrs, 6 speed 40K, 460/70R24, Q-fit carriage, boom suspension, PUH, trailer brakes, air con & air seat Stk No 11055682

£29,000

www.tuckwell.co.uk

RAYLEIGH 01268 783311 Tim Thornton 07557 922965

D

DUNMOW 01371 875751 Olwyn Poulson 07710 135644

W

WORLINGWORTH 01728 628325 Tom Mason 07957 844986

A

ARDLEIGH 01206 230283 Mark Debenham 07710 148420

158 www.farmads.co.uk June 2020

fg_class_june_20.indd 158

20/05/2020 15:11


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196 OAT flakes, oat flour or cheap bulk chaff, can deliver oat chaff in bulk, Huntingdon. R Rayner Tel 07808 066655 (Cambs)

LIVESTOCK (cont)

ARMADILLO ARC PEDIGREE Simmental bulls for sale, TB4 area & SAC Elite clear tested. C Clarke Tel 07711 404371 (Suffolk)

28-69423

Insulated twin skin Increased yield Flip up plastic fender

www.contentedproducts.co.uk

01353 862 044

GERMAN SHEPHERD X pups for sale, ready from 23/5/20, wormed regularly, mother & father are on farm, photos & videos can be emailed on request so social distancing can be observed, ideal yard/guard dogs. L Burton Tel 07885 676171/07710 336416 or email laflint2@btinternet. com (Cambs).

PR NE OD W UC T

PTO TUB GRINDER

GALEBREAKER bayscreen 4m wide by 1.5m high (12), 4.6m wide by 1.5m high (3), 4.6m wide by 2m high (1), 4.6m wide by 1m high (4), very good condition, only used for 2 winters. £2,000+VAT ono. R King Tel 07929 424474 (Notts)

28-72297

THREE castrated billy kids, 3 months old Boer X. £200 for the 3 ono. S Barker Tel 01953 860959 (Norfolk)

Anglia Quality Meat GALVANISED calf creep feeder. £450+VAT. P Burdett Tel 07976 525029 (Rutland)

WANTED Finished Cattle

PEDIGREE polled Hereford maiden heifers, 14–17 months, good breeding, 20 to choose from. J Speirs Tel 07979 463480 (Beds)

HORNER Rambo sheep shears, 12v. £250+VAT. W Gilman Tel 07736 361376 (Rutland)

Transactions fully insured Contact: Tim Leigh

01763 241222 Process your straw with the

Straw Buster F1050

For the perfect chop length

01400 272475

Tel Email welmacuk@btconnect.com

www.welmacuk.co.uk

CHAROLAIS bulls for sale - excellent pedigrees & temperaments, halter trained & ready to work now, Wissington Charolais. J & J Rix Tel 07850 796057/07500 904462/01206 262133 (Essex)

STAINLESS steel water troughs with ball valve compartment, excellent condition, size is 90mm deep, 140mm wide, these troughs range from 1900mm to 2200mm in size & some bigger, 28 troughs in total. £220+VAT each. R King Tel 07929 424474 (Notts) IRONWORK sheep turnover crate, only used once, like new. £700 ono. R Baldwyn Tel 07970 184954 (Glos)

Barry Horne

BULK FEEDERS FEED UK SILOS 28-71444

BRITISH Lop pedigree boar, Larkrise General line out of sire Liskeard General 20 & dam Penllwyn Lulu 63, 2yrs old, proven, litters 10+, genuine reason for sale. £230. D Hammond Tel 07961 881946 (Lincs)

SEVEN weaners born 22/4/20, ready at 8 weeks (17 June), from Piertrain X sow & Hampshire boar. £50 each. D Hammond Tel 07961 881946 (Lincs) WE have a few Suffolk shearling ewes as we need to keep our numbers down, all accredited & fully vaccinated, would make a nice starter flock. J Wolton Tel 07920 772862 (Essex) FULLWOOD ice bank unit bulk tank, 7500L, in good working order, ceased milk production. C Lane Tel 07768 533767 (Oxon)

1 x 12t fibreglass silos 3 x 12t Roxell

POLLED pedigree Charolais bull for sale, 2yrs, from JordanCastle herd with 30+ years of polled breeding, quiet temperament, well grown & ready for work. Please contact Sydney Carr for more information or view our website www.pollcharolais.com. POA. S Carr Tel 01623 861088/07885 433429 (Notts) EX-LAYING hens, still laying well. £1 each. J Rice Tel 07759 650475 (Suffolk)

PEDIGREE Hereford polled bulls, ready to work, 12 to 15 months, great temperament & conformation, High Health status. R Fowell Tel 07947 126053/01263 587285 (Norfolk)

FEEDER bin 14t. £200. G Meadows Tel 07951 111182/01728 660577 (Suffolk)

GALEBREAKER Windbreaks (8), 15’ x 10’, to suit standard bays; also 14 heavy duty galvanised sheeted gates, 4’ x 14’, to suit 15’ bays. Will split, Nottingham based. POA. S Blant Tel 07801 986504/0115 963 2595 (Notts)

WANTED & FOR SALE

07879 402246 01948 710662

KUHN Primor 3570 M straw blower, 2018 model, done very little work, c/w control box, as good as new. £10,500+VAT. S Walks Tel 07778 564979 (Norfolk)

REGISTERED pedigree Blonde bull, 5ys old, we have had some great calves from him, we are only selling as we now need new blood lines, calm temperament, TB4, call for more info. £2,000. A Wombwell Tel 07975 504420/07814 451463 (Essex)

MACHINERY

HOMEBRED Stabiliser & British Blue steers & heifers, March/April 2019 born, out of good quality beef cows, named sire on passport, Farm Assured, TB4 area, Panacur Bolus wormed, heifers would make good suckler cows, but equally good for finishing. H Rutter Tel 07729 315750 (Lincs) ABERDEEN Angus X & Limousin X calves, between 4–6mths, all sourced for rearing off High Health farm, Angus have named sire steers & heifers, been dehorned, growing really well, would be ideal to turn out on grass, all TB4, call for details. A Youngman Tel 07732 042213 (Suffolk) TEN single ewe troughs for pens. £5 each. R Sinkler Tel 01377 270251 (E Yorks)

TEAGLE Tomahawk 8100 straw spreader, with swivel chute, bluetooth control, extension on back door, extension on chute, bought in 2017, very good condition, like new. £8,950+VAT ono. R King Tel 07929 424474 (Notts)

Buy and sell online — www.farmads.co.uk

STRAW BUSTER F1050

28-70865

GOSLINGS SA organic, hatching now, please call for details. M De Roy Tel 07849 647405/07999 863861 (Essex) INDIAN blue peacock & peahen (related), 2019, Buff or Pington ducks, White Runner ducks & drakes, Spalding. C Grundy Tel 01406 330205 (Lincs)

TWO nanny goats, 15 months old, 1 Anglo Nubian X Sanaan, 1 Anglo Nubian X British Alpine. £160 each or £300 for the two. S Barker Tel 01953 860959 (Norfolk)

EIGHT Space Ray gas brooders, no longer needed, free to a good home, useful for spares parts. M Binder Tel 07788 648187/01986 781351 (Suffolk)

SHEEP dressing stand, brand new, prepare your prize stock for the upcoming show season in comfort instead of being bent double all day, spring assisted so no heavy lifting. £320 no VAT. No text pls. E Ritson Tel 07711 407029 (Co Down) PEDIGREE Shorthorn bulls, good temperaments, selection, 16mths. R Cade Tel 07909 116704 (Cambs)

Implement Mover 01223 613246

info@ceresmachinery.com www.ceresmachinery.com

June 2020 www.farmads.co.uk 159

fg_class_june_20.indd 159

22/05/2020 08:55


2018 Case Puma 165MC

c/w full electric controls & trailer hitch, has full dealer winter service, in super order

10 Heliodor 9 cultivator, 80X notched concave discs, soil/ soil double roller, 550/45-22.5 wheels, excellent

2009 John Deere 582

Premium round baler, c/w roto feed & cover edge net wrapping, 34000 bales, in good condition

72506

POA

2004 JF FCT 900 trailed forage harvester

2017 Lemken 10m Gigant

£9,500

c/w 12 ST tines, DD Lite roller (new) & Stocks seeder, very good condition

Stocks applicator, half shut off, 374ha (has optional liquid fertiliser applicator kit), superb

£4,950

£18,750 2011 Simba SL500 5m trailed cultivator

2019 Weaving GD80018m drill

self propelled sprayer, c/w 2500L, 24m, RDS 34i controller, 2 sets of wheels, 6300hrs, good condition

c/w header, laser, APS, 3D, 6 straw walkers, 300hp, ch/ch spreader, only 886 drum hrs, vgc

POA

1998 Knight Househam S Sprint

2010 Claas Tucano 450

POA

12/24/28m boom, 175hp, LH Agro 5000, 2 sets of wheels, v/good

c/w 50k, PUH, cab susp, air, f/suspension, 540 fronts, 650 rears, 3 spools, 7900hrs, very tidy

£11,950

£23,950

2004 Bateman RB25 3000L

2012 Claas Arion 640

c/w 50kph, 4 electric spools, air braking, 1800hrs, good condition

£67,750

12/24m, 125hp, LH Agro 5000, only 2185hrs, 320X38 narrow, 680X26.5 floatation wheels, excellent condition

£23,750

2011 Bateman RB17 3000L

07764 835562

£52,750

POA

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Thames Valley Machinery

Abingdon • Oxon

1994 Claas Dominator 118 SL

Maxi combine c/w 20’ header, trolley, chopper, 4400hrs

ONE OF THE UK’s PREMIER FARM MACHINERY REGISTERS Please contact Mike for more information on these and many other machines

www.tvmachinery.com

Rodney Cowle Machinery

Over 25 combines in stock – see our website for details

We can supply New Parts for your Combine • CONCAVES • RASP BARS • BELTS • KNIVES 2000 New Holland TC56 Hydro 1991 New Holland TX32 2010 New Holland CX 8070 2015 New Holland TC 5.80 Plus choice of 2, rotary separator, 15’ 13’ cut 2900hrs, air con, very straight 24’, varifeed, 1250/1500hrs SL sieves, 16’ varifeed, smart sieves, chopper, • CLEAN GRAIN, RETURN & cut, chopper, chaff spreader 2500 eng tidy machine chopper/chaff spreader chaff spreader, only 400hrs, like new FRONT ELEVATOR CHAINS hrs in immaculate condition (library photo) • IMPELLOR PLATES • RETRACTABLE FINGERS • FILTER KITS and many other wearing parts in stock MAIL ORDER

01837 83645

2005 New Holland TX66

SL sieves, chopper, chaff spreader, 2200/2600hrs, 24’ cut, autofloat, very nice machine

2010 Claas Lexion 570 Terra Trac 30’ Vario, 3D sieves, chopp/

2010 Claas Lexion 520

2006 Claas Lexion 550 Montana

2009 Claas Lexion 570+

2000 New Holland TC56 Hydro Plus 15’ cut, chopper & chaff

2007 Claas Medion 310

chaff, laser, only 1600/1100hrs very nice machine

V600 Vario 3D sieves chopper/chaff spreader auto contour, yield/moisture 1000/1300hrs

with V660 header, chopper, chaff spreader, 1100/1600hrs

Rodney

07831 178271 Steve

07786 391816

Great Punchardon Farm Winkleigh Devon EX19 8DJ

2000 Claas Dominator 98VX Maxi 15’ cut, 3D sieves, 2209hrs, very nice machine

V750 header, 900/32 tyres, chopper/ chaff spreader, 900/1200hrs, in very nice condition

email: sales@rodneycowlemachinery.co.uk

spreader, 2500 eng hrs, very nice condition

choice of 2, one has 950hrs & other 1800, 15’ cut 3D sieves & chopper

www.rodneycowlemachinery.co.uk

72503

160 www.farmads.co.uk June 2020

fg_class_june_20.indd 160

22/05/2020 08:58


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

OLIVERS OLIVERS Luton Tel: 01582 727111

OLIVERS Petworth Tel: 01798 343660

71352

Full listings available at

www.oliveragriculture.co.uk OLIVERS Reading Tel: 01189 723741

OLIVERS Tingewick Tel: 01280 848494

OLIVERS Winchester Tel: 01962 774590

Foragers & Combines – Finance available, please call for details.

CLAAS JAGUAR 950 4WD £88,500 2011, 3M pick up, 20 blade cylinder, 5480/3749hrs, 4wd, R/crop press, auto lube, corn cracker, rear weights, camera kit

CLAAS JAGUAR 870 SP 4WD £92,500 2013, 3M pick up, 24 blade cylinder, 3652/2276hrs, 4wd, R/ crop press, auto shearbar, auto lube, A/C, corn cracker, PUH, weights

CLAAS LEXION 780 TT £183,950 2015, 12.30m M Vario header, 30kph, 2164/1625hrs, LH V knife, RH V knife, LH laser, A/C, Yield/Q Meter, CEMOS, 3D, laser, quantimeter

CLAAS JAGUAR 970 4WD £267,500 2019, 3M pick up, 24 blade cylinder, 425/365hrs, 4wd, R/crop press, auto shearbar, auto lube, A/C, corn cracker, PUH, additive carrier, weights

CLAAS QUADRANT 5300 FINE CUT TA £99,500 2017, approx 18,000 bales, 2.35m PU, double roller crop press, rear steering axle, 51 blades, fine cut, Claas Communicator terminal

CLAAS LINER 3100 £12,750 2012, twin rotor rake, Claas Communicator control box, manual height adjustment, 8.7m to 10m raking width, 14 tine arms per rotor, PROFIX tine arms

CLAAS LINER 3500 £17,500 2013, manual height adjustment rotor, 500/55-20 transport tyres, 4 rotor rake, road lights & board, Operator terminal

CLAAS LINER 3100 £11,950 2016, w/w 8.70-10.0 meter, hyd width adjustment, road lights & markers, rear wheel weights, 14 tines arms per rotor, fully floating rotor susp

CLAAS VOLTO 800 £6,500 2014, 6 rotor tedder, 7.7m working width, teds out 3 x 3m mower swaths, folding park stands, markers & lights

CLAAS VOLTO 870 £7,850 2013, 8 rotor tedder, 8.7m working width, bar stored, headland lift, manual headland curtain

CLAAS VOLTO 1300T £17,500 2016, hydraulic headland lift, hydraulic curtain, 10 rotor, max spread

CLAAS VOLTO 800 £6,250 2016, 6 rotor tedder, mechanical headland curtain

CLAAS VOLTO 770 £4,950 2011, 7.7m, c/w 6 rotors to standard specification

NEW RICHARD WESTERN SF14HS £19,595 silage ext sides, perpex window, grain chute, LED beacon, lights & side markers, float tyres, HS axles, hyd air brakes, sprung drawbar, hyd tailgate

CLAAS LEXION 760 M £165,000 £125,000 2014, 13.5m M Vario header, 30kph, 2012, 9m M Vario header, 30kph, 2368/1676hrs, LH V knife, RH V 2109/1437hrs, LH V knife, LH laser, knife, LH laser, A/C, Yield/Q Meter, A/C, Yield/Q Meter Yield mapping, GPS, CEMOS

CLAAS LEXION 570+ £75,000 2006, 7.5m M Vario header, 25kph, 2595/1605hrs, A/C, Yield/Q Meter, grainmeters, special cut ii with power spreader

CLAAS LEXION 750 T4F £163,000 2016, 9m M auto contour header, 30kph, 877/611hrs, RH V knife, A/C, Yield/Q Meter, c/w rape kit, RH side knife, GPS ready, 3XL auger, 4D

CLAAS LEXION 770 TT £179,950 2015, 12.3m M Vario header, 30kph, 1540/1218hrs, LH V knife, RH V knife, LH laser, Xenon lights, A/C, Yield/Q Meter, Yield mapping, Telematics, 3XL auger

CLAAS LEXION 670TT £199,500 2017, 7.7m M Vario header, 30kph, 677/558 drum hrs, RH V knife, A/C, 3D, returns monitoring, 11,000L grain tank, XXL auger, Telematics ready, LED lights

CLAAS LEXION 650 £159,950 2017, 7.5m M Vario header, 25kph, 532/404hrs, RH V knife, A/C, Yield/Q Meter, AdBlue, 10,000L grain tank, electric seives, auto contour, returns monitor

CLAAS XERION 3800 £59,950 2009, 50kph, 388hp, 7250hrs, f/ linkage, elec hyd, hyd top link, 5 rearm 2 front spools, ISO socket

CLAAS AXION 800 CIS £59,850 2015, 50kph, 205hp, AdBlue appx 2756hrs, 3 Spools, front suspension, Eco PTO, A/C, cab suspension, air brakes, PUH

CLAAS ARION 420 MR £40,975 2018, 40kph, 100hp, appx 350hrs, 2 spools, A/C, trailer brake, air brakes, PUH, 100hp, twin line air brakes, ext warranty May 2022 or 5000hrs

CLAAS SCORPION 7035 VP £46,500 2016, 2311hrs, hyd locking pin & cone, 4wd, A/C, trailer brake, PUH, boom suspension, 3.5t lift, 7m lift, new tyres

CLAAS LEXION 780 TT

CLAAS LEXION 600 TT £98,950 2010, 12m M Vario header, 30kph, 2873/2108hrs, LH V knife, RH V knife, A/C, Yield/Q Meter, Yield mapping, GPS, cruise control, S3 steering with Egnos signal

Telehandlers

Tractors

CLAAS 7035 VP 2016, 4350hrs, 4wd, A/C, PUH, Scorpion headstock, c/w pallet fork carriage & tines ................£39,750 CLAAS SCORPION 7044 VP T4F 2017, 3600hrs, hyd locking Scorpion headsctock, 4wd, c/w pallet fork ..........£49,950 CLAAS SCORPION 7035 VP 2016, 3166hrs, hyd locking pin & cone, 4wd, 3.5t lift, 7m lift, new tyres ...............£42,500 CLAAS SCORPION 6030CP 2014, 3650hrs, Scorpion carriage, 4wd, PUH, boom suspension, 30kph. ...............£36,950

CLAAS ARION 650 2013, 40kph, 184hp, 6066hrs, 4 spools, f/linkage, elec hyd, CEBIS ...........................£33,500 CLAAS ARES 697 ATZ 2007, 40kph, 155hp, 8159hrs, 3 spools, Eco PTO, mech spools ..........................£26,850 CLAAS ARION 620 CIS 2010, 40kph, 5889hrs, 3 spools, f/weight, Eco PTO ............................................£27,950 CLAAS ARION 640 CIS 2011, 50kph, 180hp, 7250hrs, 3 spools, f/weights, cab susp, air brakes, PUH.....£29,500 CLAAS ARION 650 2013, 50kph, 185hp, 5150hrs, 4 spools, f/linkage, elec hyd, PUH, CEBIS ..................£47,500 CLAAS ARION 620 2017, 50kph, 155hp, 2606hrs, 3 spools, f/weights, CIS, air brakes, warranty until 27/07/2022 or 3750hrs .............................................................................................................................£52,950 CLAAS ARION 430 2017, 40kph, 110hp, AdBlue 450hrs, 2 spools, FL100 loader, f/linkage, warranty until 01/10/2022 or 2500hrs ......................................................................................................................£53,850 CLAAS AXION 850 2011, 50kph, 258hp, 7000hrs, 3 spools, f/linkage, CEBIS, elec DA spools, full spec ..£43,500 CLAAS XERION 5000 2010, 50kph, 500hp, AdBlue, 4750hrs, f/linkage, f/weights, GPS steering, R/ weights, 6 rear, 2 front spools ....................................................................................................................£85,000 CLAAS AXION 950 2013, 50kph, AdBlue, 6430hrs, 5 spools, f/linkage, elec hyd, GPS steering S10 ........£53,000

Other Equipment WOOTTON CMT12 2003, 12t, STD drawbar, STD tailgate, hyd brakes, sprung axles, super singles, grain chute ....£5,990 CLAAS UNIFARM CM166 2010, 2 drum mower, 30hp req, only 350kg, Mech break back, extra offset, sprung suspension ...............................................................................................................................................................£1,150 McCONNEL TOPPER 9 1995, 3pt linkage mtd, 9’ wide, depth wheels, new skids & clutch plates gearbox oils changed ...................................................................................................................................................................£1,950 HARVEST SERVICES MAJOR SL601 2006, 3pt linkage mtd, 6’ wide, cuts up to 30mm dia, single gearbox, height adjustable skids. ............................................................................................................................................... £950 FLEMING TOP 4 2000, 4’ rotary topper, good condition. ........................................................................................... £675

Email: sales@oliveragriculture.co.uk

Buy and sell online — www.farmads.co.uk

CLAAS JAGUAR 950 4WD £145,000 2015, 3M pick up, 20 blade cylinder, 2071/1480hrs, 4wd, R/crop press, auto shearbar, auto lube, A/C, corn cracker, weights

www.oliveragriculture.co.uk

June 2020 www.farmads.co.uk 161

fg_class_june_20.indd 161

20/05/2020 15:18


Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

N

NM

0% Finance available JD 5100R ‘17, 964hrs, Command 8 40k, PUH with hook & drawbar, hydraulic trailer brakes, 3 SCV’s £42,500

JD 6110R ‘14, 3317hrs, AutoQuad+ 40k, TLS, air seat, a/c, front linkage & PTO £36,000

A JD 6210R ‘12, 5774hrs, AutoPowr 50k, prem cab, 4 E-SCV’s, TLS, AutoTrac ready, air brakes £54,500

JD 6130R ‘17, 2823hrs, AutoQuad+ 50k, TLS+, 3 prem E-SCV’s, 4100 display, AutoTrac activation £55,500

A JD 6210R ‘12, 5909hrs, AutoQuad 50k, TLS, AutoTrac ready, HCS, 4 E-SCV’s £54,750

JD 6195R ‘19, 509hrs, AutoPowr 50k, 4 E-SCV’s, CommandPro, AutoTrac ready, iTec, E-joystick £114,000

N

A

N

JD 6250R ‘19, 804hrs, AutoPowr 50k, TLS & HCS, AutoTrac ready, front hitch & PTO, hyd top link £139,500

JD 7260R ‘13, 6400hrs, AutoPowr 50k, 5 rear SCV’s, CommandArm, GS3 CommandCentre, TLS+ £55,000

NM

E Claas Lexion 600 TT ‘10, Hydro 30k, 1200 Vario header, straw chopper, auger chaff spreader, 1900 drum hrs £96,000

John Deere 9780 CTS ‘04, 625R header, harvest ready, 80% tyres, 1510 drum hrs £58,000

N JD S685i ‘16, ex-hire, ProDrive 30k, 747 drum hrs, 635 Premium Flow header £205,000

E

JD S690i ‘13, 1814hrs, ProDrive 38k, AutoTrac complete, 635R header, 1168 drum hrs £125,000

N JD 635PF Header ‘12 premium flow, header overhauled ’19 - new belts & wear plates £22,000

Zurn 35ft Rape extension side knives, trailer, good condition £6,000

C Amazone ZA-M Ultra Fertiliser Spreader ‘07, parking stand, very good condition £6,350

C

C Kuhn Axis 40.1 HEMC ‘13, 3654 hrs, S6 VXR discs, 24-36m, ISOBUS only, 1800l hopper ext £4,250

C JD R4040i Sprayer, ‘15, 36/18m. AutoTrac ready, BoomTrac, high flow system 560l £65,000

E Kuhn GA 4321 Rotor Rake ‘20, 4.3m working width £5,750

N N

N

JD 6175R ‘18, 1031hrs, AutoPowr 50k, AT ready, 4100 display, 3 E-SCV’s, remaining PowerGard March ‘22/2250 hrs £112,000

JD 6190R ‘11, 2050hrs, AutoQuad+ 40k, TLS, HCS, PUH, 3 E-SCV’s, Q7S Quicke front loader £74,000

0% Finance available

JD 6215R ‘17, 1960hrs, AutoPowr 50k, TLS+ with brakes, 4 prem E-SCV’s, iTec, PUH, E-joystick £97,750

JD 6215R ‘15, 3924hrs, DirectDrive 50k, CommandArm, TLS, rear PTO, 4 E-SCV’s, PUH £85,000

0% Finance available JD 6215R ‘18, 1720hrs, AutoPowr 50k, prem cab, AutoTrac ready, 3 E-SCV’s, remaining PowerGard Jan ‘22/2250hrs £118,500

O

N JD 8320R ‘17, 511hrs, PowerShift 40k, ILS with brakes, 4 SCV’s, SF6000, PowerGard to 04/21 £141,000

N

A

N

N

E Challenger MT 775E ‘16, 3394hrs, Power Shift 16F 4R, 4 E-SCV’s, new 30” tracks £119,000

JD 6145R ‘19, 1043hrs, AutoQuad+ 50k, TLS+, 3 prem E-SCV’s, PUH, AutoTrac ready £76,500

N

JD 6250R ‘18, 2034hrs, AutoPowr 50k, TLS+, AT ready, 4 E-SCV’s, hyd top link, SF6000, prem front hitch £114,000

JD 9620RX ‘16, 3559hrs, E18 30k, CommandCentre w/ activation, 5 E-SCV’s, 30” tracks 60% £175,000

N

B

JD 8370R ‘14, 3412hrs, AutoPower 50k, CommmandArm, AutoTrac ready, 4 E-SCV’s £97,000

C JD 8370RT ‘17, 2304hrs, AutoPowr 40k, 5 rear SCV’s, 30” tracks, std mid rollers £165,000

N

N

N

John Deere 9780i CTS ‘05, Hydro 30k , chaff spreader, 625R header, AT activation, 2186 drum hrs £60,000

John Deere T560i ‘17, PBS 30k, AutoTrac complete, 625R header, 480 drum hrs, hyd chaff spreader £150,000

MF 7280 Centora ‘12, 8 straw walker, Power Flow header, 737 drum hrs, very good condition £62,000

0% Finance available

E

JD S790i(T) ‘19, ProDrive 40k, 740 Draper header & trolley, 2 yr PowerGard extended warranty £355,000

E JD R9621 Trailed Sprayer ‘14 24/36m, high flow solution spray system, 620/70R42 BKT £43,000

E Kuhn FC 313 Mower Conditioner ‘13, 3.10m working width, disc mower, side lights £6,750

E

N

0% Finance available JD S790i ‘18, ProDrive 38k, 640 header, side knives, 579 drum hours, 1 yr PowerGard extended warranty £298,500

Zurn 400t Header Trolley ‘14, to suit 35ft header, very good condition £4,350

NM Manitou MLT 741 V+ Elite ‘18, 316hrs, Deutz Stage 4 eng, JSM joystick, hyd locking £71,000

E Kuhn Primor 3570M Straw Blower ’19, swivelling chute elec control, fixed chute hyd control, 24 knives £11,835

O

C

Kuhn VKM 280 ‘19, hydraulic sideshift, hammer knives, excellent condition £7,000

Kuhn BPR 280 Flail Mower ‘19, hammer knives, hydraulic sideshift, rear roller £8,000

Please contact your local branch or Charlie Oldfield on 07825 932221

162 www.farmads.co.uk June 2020

fg_class_june_20.indd 162

20/05/2020 15:43


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

NEW MACHINERY IN STOCK www.suffagri.co.uk

Krone R320 CV Mower Conditioner (rear) .....................................................ÂŁ5,000 Krone F320 CV Front Mower Conditioner .....................................................ÂŁ6,000 Amazone Z-AM Fertiliser Spreader ..................................................................ÂŁ3,350 Amazone Pantera Self Propelled Sprayer, 36m ................................................POA

SPECIAL OFFERS ON EX STOCK Amazone Fertiliser Spreaders • Krone Mowers & Rakes Full finance available

McCORMICK TRACTORS AT SPECIAL PRICES Ex our yard

USED MACHINERY IN STOCK

Any make of machinery and tractor taken in part exchange. DEMO TRACTORS AVAILABLE CONTACT US ON 01359 232155 71815

Deutz M620, 2009 Case 5150 c/w loader 1995 JD 2850 2wd McCormick CX105, 2007, low hrs, c/w loader McCormick MC110 c/w loader, 2010, 5000hrs New Holland T5 -115 c/w loader, 2013 2200hrs Welger 245 roller baler, 2012, 14,000 bales, low bale count Bomford 3m heavy duty shaft drive topper Twyman 10’ flail mower Lely Roterra 4m power harrow Kverneland 3m power harrow as new, had very little use Amazone ED452-K 6 row maize drill, 2011 Amazone ZAM300 fertiliser spreader, tested 2020, good condition Dowdeswell 5 furrow reversible plough Kuhn 700G11 disc mower Kuhn MDS1141 QL fertiliser spreader Kuhn GA7501 twin rotor rake, exc condition Kverneland Taarup 9142 single rotor rake Kverneland Taarup 9578C twin rotor rake Kverneland 4032 trailed mower conditioner Lely 4855 single rotor rake, exc condition Teagle 40/40 tub feeder/bedder Teagle 80/80 SC feeder/bedder Conor 12m feeder mixer Graham Edwards 14’ tri axle cattle trailer Ifor Williams 14’ tri axle trailer, exc cond Kawasaki 300 Honda 400 Foreman quad bike Edlington Cambridge rolls, 21’ hyd folding Hi Spec 3000 gallon vacuum tanker, single axle, c/w Bowmac 6.3 trailing shoe (coming in soon) PF 12t heavy duty dump trailer

Pakenham, Bury St Edmunds, Suffolk IP31 2JS

01359 232155 • After Hours: 07768 007528 • E-mail: office@suffagri.co.uk Visit our NEW website:

www.suffagri.co.uk

72423

ancusee 0%thFpain yment pa The ATV & UTV Specialists

3 mon up* Easy online sign

NEW Honda TRX420FM2 From ÂŁ49 per week

NEW Suzuki Kingquad 500XP From ÂŁ65 per week

NEW Yamaha Kodiak 700 From ÂŁ66 per week

NEW Kawasaki Mule PRO DX From £89 per week *Offer valid to July 31st 2020 • All prices subject to VAT

*Finance is available via Arblease. Arblease are a broker and is a trading name of Bond Capital Finance. Bond Capital Finance is authorised and regulated by the Financial Conduct Authority. Finance is for business purposes only and available throughout the UK & Ireland. Quotes and prices are subject to acceptance, terms and conditions.

01234 768889

email: info@mkmagri.com

www.mkmagri.com

Wood End • Marston Moreteyne • Bedfordshire • MK43 0NJ

01284 771344

email: keith@mkmagri.com

Manor Farm • Ixworth Thorpe • Bury St Edmunds • Suffolk • IP31 1QH

Buy and sell online — www.farmads.co.uk

Deutz 5090 demonstrator, c/w Stoll loader Deutz 6165 powershift demonstrator Deutz 6215 TTV demo unit Kverneland 5 furrow LB Variwidth 300hp headstock Kverneland 3332 mounted mower conditioner 3.2m Kverneland FRO flail grass topper Kverneland TAR 9464 twin rotor rake (mounted) Kverneland 8452 4 row hay tedder Kverneland 8576 6 row hay tedder Kverneland 85112C 10 row tedder trailed Redrock 24t tri-axle low-loading trailer McHale 991EB bale wrapper, fully auto McHale round bale handlers McHale 750 belt baler, hyd brakes McHale 991 high speed wrapper Walter Watson 6.3m flat roll Walter Watson hydraulic rotating 12’ end tow flat roll Walter Watson bull beef feeders Opico 6m hydraulic folding grass harrows Moulton FY4 yard scraper Kawasaki Mule Pro DX Kawasaki Mule Pro MX

Agricultural Engineers

Saddington Road Nr SHEARSBY Leics LE17 6PX

01162 478 999

Sales: Dave Griffin – mobile 07712 509869 70466

www.athoughton.co.uk

June 2020 www.farmads.co.uk 163

fg_class_june_20.indd 163

20/05/2020 15:46


MACHINERY (cont)

2016 Doosan G20G

MACHINERY HIRE

FGM

31-72577

29-72431 Norfolk Mobile 07775 741720

30-72492

e, Trailer Hire, Tractor Hir Contract Bale Chasing and other Agricultural Services

07804 823484 01279 815319 e: ollie@osgagrihire.co.uk www.osgagrihire.co.uk

£6,950 (+VAT)

MANITOU MLT 627, 2008, approx 5000hrs, PUH, A/C, very good condition, good tyres. £21,500. L Rich Tel 07774 112211 (Glos)

Free lift triplex mast with sideshift, just 2266hrs, CSE tyres, 2,000kg capacity, lift height 4.71m new LOLER, operator’s manual, more photos available

FORKLIFT/ TELEHANDLER MAN CAGE 31-71763

Also Machinery and Implements: Spares, Wheels, Tyres, Loaders, Cabs and Hitches

ATKIN

MASSEY Ferguson/Bobcat 8925 telehandler, 2005, 7600hrs, 5.6m reach, 2.5t lift, PUH, good 20" tyres, tidy small loader. £12,500. L Rich Tel 07774 112211 (Glos)

£420+VAT 01531 820545 www.euroquip.net • sales@euroquip.net

01362 692104/637332 www.atkin-farm-machinery.co.uk

IH 454 2wd tractor, S reg, std box, low hrs, clean & tidy, gwo ..... £3,750

£26,450 (+VAT) 101hp, Perkins turbo, 3,800hrs, hyd fork positioning, legs, reg May 2012, first 2000hrs in training school, more photos available, popular 10m machine with compact size

Champion Machinery Sales

IH 484 2wd tractor, c/w Tanco loader, power bucket, gwo..... £4,600

S GUIDE

W NTS RTISEME TO ADVE

31-72575

MATBRO forklift cup & cone type bolt on brackets for machine attachments. M Pilkington Tel 07973 730169/01427 752229 (Lincs)

N

MENTIO

ER LYING FARM HEN REP

Manitou MT1030ST

G. BROWN USED MACHINERY SALES

REFURBISHED a few years ago, with new pipes & fittings, nice & square, one slightly bent tine, ready to go to work, pin & cone headstock. £600. P Weston Tel 07947 923845 (Northants)

PLEASE

EURO fit small bucket, good condition, South Lincs. £300. D Matthews Tel 01775 640230/07768 245113 (Lincs)

Norwich Road, Dereham

IH 484 2wd tractor, W reg, std box, clean & tidy, gwo .................. £3,950

www.championmachinerysales.co.uk

JCB 560-80 Agri Super, 2016, approx 4500hrs, 145hp, Manitou headstock, PUH, hyd front pin locking, Lincoln Auto Lube fitted from new, balance of 5yr/5000hr warranty, available early June. £48,500+VAT. A Robinson Tel 07876 711477 (Beds) ATLAS AK 3008 crane, with oil tank & Lombardini engine, complete, hasn't been used for a couple of years. £800+VAT. J Hatton Tel 07803 721237 (Essex) KRAMER 312SE small loading shovel, needs TLC. POA. D Leigh Tel 07502 661861 (Northants)

All prices plus VAT

FOR FARMERS GUIDE READERS

RE

UNTRY STO

CO ALL IN ONE

33-69716

Tel: 01280 705202 Fax: 01280 704163 Email: hydramex@hotmail.com

Field Farm, Charlton Road, Evenley, Brackley, Northants, NN13 5GH

ACCESS ladder, strong steel construction, 12 non slip rungs, overall height 3710. £50 no VAT. D Ivens Tel 07969 877834 (Northants) FAC Daystate Woolverine 22 air rifle HP 60' 16, mint condition, only had 2 mags of pellets fired, Daystate air rifle test sheet, genuine reason for sale, cost £1,400. Sensible offer accepted. Only FHC holders apply please. V Blake Tel 01379 740710 (Norfolk)

(Cheshire) Email : cmsalesltd@aol.com www.championmachinerysales.co.uk

Tanco loader to fit IH 454–484 tractors, c/w power bucket ....... £850

Husqvarna Ride Proflex mower, 20hp, c/w 44” outfront cutting deck, vgc .............................. £1,750

GENERAL FARM AND AGRICULTURAL SUPPLIERS OF TRACTOR & WEARING PARTS, HARDWARE, CLOTHING ETC.

Martin: 07811 200752

Pair 23.1-26 grassland wheels & tyres to fit IH or MF .................. £595

Bomford Sabre 9’ pasture topper, gwo ...................................... £1,350

KONGSKILDE hammer mill, 5.5kw single phase (motor could be replaced with 3 phase), with some piping, for pig & poultry feed. £350. J Bristow Tel 01363 772965 (Devon)

MISCELLANEOUS

PAIR of pallet tines on the bar to match a JCB quick hitch fitting. £200 ono. F Johnson Tel 01507 450203 (Lincs) SANDERSON 50 forklift, on V reg plate, c/w pallet tines. POA. D Leigh Tel 07502 661861 (Northants)

FARM MACHINERY

Mitsubishi MTE 2000D 25hp 4wd compact tractor, low hrs c/w Big-Bee Agric-4 pasture topper & Fleming tipping box .................................POA

(Cheshire) Email : cmsalesltd@aol.com

Hydramex Limited

LISTER powered boring machine (water). H Ashton Tel 07831 588318 (Lincs)

Good used Secondhand Tractors of most makes always for sale

Champion Machinery Sales

Martin: 07811 200752

MATERIALS HANDLERS

All + VAT unless otherwise stated

29-71917

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

MACHINERY

Flemings 9’ meadow topper, 2017, as new.................................. £1,850 Edlington 2m ATV pad type weedwiper c/w brackets & control box ............................. £650 Micron 6m tractor mounted weed wipers, new/ex hire .... from £2,600 Amazone 2m Maxi Mower, flail collector, 2017, tipping hopper ...............£2,950 ono Newage Stamford 3P/L PTO generator, 415/240 volts, 3 phase & single phase ............................ £750 Standen FM2 2 row potato tops pulveriser, c/w cross conveyor, gwo......................................... £950 Massey Ferguson FYM spreader as used .................................... £400 Quantock 2.5m slitter/aerator, new, for sale or hire ..................... £2,360 Reekie 2 row planter, tipping hopper hood, Netagco bed tiller & bedmaker .............................. Offers JJ Wright history books, Ford main dealer ........ £15+P&P no VAT Weedwiper spares in stock + VAT

MILL & MIX

ROOT basket, width 57” x height 31” x depth 30”, suitable for fore end loader, in good working order. P Waspe Tel 07462 472289 (Suffolk)

JCB 524-50, 2006, 2400hrs, PUH. £23,000. H Brown Tel 07977 568811 (Cambs)

29-70652

Tel: 01945 700142 or 07774 676440

STUART manual double clay trap, good working order, c/w a box of clays. £50. S March Tel 07860 835995 (Essex) LUXURY bathroom suite, air bath pedestal basin & toilet, champagne colour, could email photo in situ, now dismantled for collection, South Lincs. C Grundy Tel 01406 330205 (Lincs)

Buy and sell online

www.farmads.co.uk STRIMECH bucket, pin & cone fitting, 1.5cu/m, good condition, South Lincs. £600. D Matthews Tel 01775 640230/07768 245113 (Lincs)

MERLO 42.7 CV-Tronic 140, 290hrs, full spec, c/w pallet tines & two spare tyres, as new condition. £69,000+VAT. Grendon House Farm Tel 07970 658813 (Warks) SANDERSON forklift, good order. £3,200+VAT. C Anderson Tel 07795 113312 (Cambs)

JOHN Deere 3420 loader, clean & tidy, good working order, clock 7269, tyres - front 70%, back 50%, genuine reason for sale. £15,000+VAT. S Muir Tel 01793 710286 (Oxon)

GODIVA fire pump, good condition, c/w hose. £475. M Robson Tel 07967 139678 (N Yorks)

164 www.farmads.co.uk June 2020

fg_class_june_20.indd 164

22/05/2020 09:10


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196 71803

SPREADERS TRAILERS & TANKERS

The Independent Spreader Trailer & Tanker Specialists Specialists

ECE

Specialists

SPREADER, TRAILER & TANKER HIRE

2014 BUNNING Lowlander 150 HD Mk2 with ISOBUS weigh cell system

2016 BUNNING Lowlander 120 Mk4 spreader

2014 BUNNING Lowlander 120 Mk4 HBD

2020 NEW (Demo) HI-SPEC Kompactor K36 trailer

WATKINS WA ATKINS

Ltd

2015 Bunning Lowlander 120 MK4 HBD – weigh cells

2017 TRAMSPREAD 6m dribble bar unit, electronic metering, etc

2013 ECE Fieldmaster 1000 spreader

2016 BAILEY 16 TB high speed trailer

New HI-SPEC 3500 with Volgelsang trailing shoe attach

NEW 2020 HI-SPEC 4000 gallon vacuum tanker – EX STOCK

We’re pleased to announce that SAS Agri Ltd are now official dealers for Norfolk and Suffolk

33’ 18t hydraulic beaver tail trailer

Front weight blocks made to order

4m hydraulic fold incorporator

2013 SAS (MARSTON) 18t/20t Beet King trailer

Buy and sell online — www.farmads.co.uk

Philip

2010 BAILEY 14t high speed trailer

WANelTsEofD All mod BUNNING spreaders

2019 demo HI-SPEC 4000 TD-S tanker

WANTED – TRAILERS & ALL MODELS BUNNING SPREADERS, 4000 GALLON TANKERS

2017 HI-SPEC/STEWART 6000 gallon demountable tri-axle chassis, air susp

2016 HI-SPEC 3500 TD-S tanker

Visit our website for further photos and details

OTHER SPREADERS & TRAILERS COMING IN – Contact us for details

Contact – Office 01263 861500 – Richard 07880 552295 – Alan 07887 722978

www.sas-agri.uk

June 2020 www.farmads.co.uk 165

fg_class_june_20.indd 165

22/05/2020 12:21


Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

MANNS CLAAS AXION 830 CEBIS 50K £62,000 2005, 50kph, 235hp, 4286hrs CT1685

CLAAS AXION 810 2014, 50kph, 5459hrs

CLAAS AXION 840 CEBIS

Alastair McCallum, Used Machinery Manager Tel: 01284 777700 Mob: 07717 861815 email: a.mccallum@claas-manns.co.uk

claas-manns.co.uk

£50,000

CLAAS XERION 3800 £80,000 2011, 50kph, 380hp, 5200hrs

McCORMICK XTX200 £22,000 2008, 40kph, 200hp, 4798hrs

CT1670

CT1717

MK0061

CLAAS ARION 650 CEBIS 50K £53,000 2016, 50kph, 3840hrs CT1665

CLAAS ARION 640 £48,000 2016, 50kph, 177hp, 3670hrs

ZETOR 4WD £13,750 2010, 30kph, 95hp, 7500hrs

CT1802

ZE0012

MASSEY FERGUSON 6485 £19,700 2006, 50kph, 9100hrs MF0275

CLAAS AXION 840 CEBIS 50K £56,500 2016, 50kph, 250hp, 5270hrs CT1767

CLAAS AXION 830 £46,500 2014, 50kph, 235hp, 5289hrs

CLAAS AXION 850 £60,000 2013, 50kph, 250hp, 2500hrs

CT1732

CT1798

CLAAS COMMANDOR 115CS £15,000 1989, 6m cutterbar 4225 EH CL2707

CLAAS LEXION 630 MONTANA £145,000 2017, 6.2m Vario, 886 EH, 702 DH CL2732

CLAAS LEXION 460E £54,500 2003, 7.5m Vario, 3848 EH, 2758 DH

CLAAS TUCANO 450 £99,995 2013, 7.5m Vario, 1242 EH, 896 DH

CLAAS LEXION 520 £45,000 2004, 5.4m Vario, 3294 EH, 2453 DH

CLAAS LEXION 570 £62,000 2004, 7.50m Vario, 3207 EH, 2325 DH

CLAAS LEXION 650 £162,000 2017, 7.7m Vario, 486 EH, 395 DH

CL2806

CL2765

CL2768

CL2778

CL2860

CLAAS LEXION 570+ £75,000 2006, 7.5m standard cutterbar, 2608 EH, 2006 DH CL2849

CLAAS LEXION 740 £89,500 2012, 9m Vario, 1780 EH, 1215 DH

CLAAS DOM 85 £2,250 1983, 4.5m Standard cutterbar, 4078 EH CL2825

GOWEIL G 3020 PROFI £12,000 2009, round & square wrapper

SIMBA ST 330 2007

£6,800

VADERSTAD A800 RAPID £8,250 2001, 8m drill

KNIGHT EUA4000 2012, 24m

SH0019

VA0012

CHALLENGER ROGATOR RG655 £100,000 2015, 2800 hours only! CA0052

2014, 50kph, 250hp, 5400hrs

£54,500 CT1765

CL2862

CLAAS AXION 850 CEBIS 50K £85,400 2017, 50kph, 265hp, 1450hrs CT1488

SUMO TRIO 3 2016, 3m

£10,500

ZZ2217

ZZ2260

£16,950

SPRAYRANGER 120D £18,000 2003, 24m, land rover power, auto box very low hours ZZ2252

KN0005

70605

166 www.farmads.co.uk June 2020

fg_class_june_20.indd 166

22/05/2020 09:12


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

2012 NH CX6090 6 straw walker, Smart sieve, yield monitor, chopper & chaff spreader, 800/65R32 & 460/70R24, 20’ Varifeed header c/w 1 side knife, header trailer, engine hrs 1,246, threshing hrs 955

2015 NH CR9080 Elevation, 24” tracks, chopper + chaff spreader, Smart Steer, 30’ Varifeed c/w trolley & side knives, engine hrs 1,259, threshing hrs 1,042

2013 NH T6.175 16x16, full suspension, 14.9R28 & 18.4R38, 4 spools, hrs 2,950

2019 NH TC5.70 (5 walker), hydro, rotary separator, Smart sieve, straw chopper, 15’ header & trailer, engine hrs 124, threshing hrs 88

2019 Demo NH T7.260 Auto Command 50kph, 600/65R28 & 650/75R38 Michelins, f/linkage & Intellisteer, hrs 175

2013 NH T6.140 Terraglide & Comfort Ride suspension, E/C, 4 spools, 420/70R28 & 520/70R38, hrs 2,950

Kverneland 3m drill combination, NGH 30 power harrow & packer, Accord Drill Pro, Suffolk coulters

New Richard Western Trailers SF14HS & SF16HS high spec trailers available & in stock now

Contact Charles Moorman Office 01777 870111 www.plattsharris.co.uk or email us at: sales@plattsharris.co.uk

71454

07970 805351

RC SETCHFIELD LTD Grantham 01476 560784

JCB 524-50 COMPACT LOADALL 14 reg, c/w 3898hrs, tyres 50%

JCB 560-80 Super 19 reg, 1251hrs

POA

POA

JCB 541-70 SUPER 16 reg , 2875hrs, tyres 80%

MF 630 trailed forage harvester

POA

£3,950

All prices subject to VAT

JCB 926-4 forklift, 15 reg, 4022hrs, full cab, 3 spools, tyres 50%

JCB 541-70 SUPER LOADALL 68 reg, 1674hrs, 145hp, new tyres

JCB 536-60 SUPER 16 reg, 4134hrs, 145hp, tyres 50%

JCB 536-60 SUPER 14 reg, 5358hrs, new tyres

JCB 536-60 SUPER 67 reg, 2700hrs, 145hp, Michelin tyres 50%

JCB 535-95 SUPER 14 reg, 4550hrs, 145hp, new tyres

JCB 531-70 SUPER 66 reg, 145hp engine, 2973hrs, Michelin tyres 45%

JCB 541-70 SUPER 19 reg, 781hrs, 145hp

POA

POA

JCB 531-70 SUPER 15 reg, 3991hrs, 145hp, tyres 40%

NEW SITREX single rotor rake, 4.2m, c/w twin wheels

JCB 15-C1 new mini digger

K-TWO AIRO 225 swath conditioner

£12,950

£3,500

TYM T503 tractor, 2013 reg, 985hrs only

POA

£3,950

POA

POA

For more pictures and more stock visit

POA

POA

£11,800

POA

Buy and sell online — www.farmads.co.uk

2019 Demo NH CR8.90 28.5’ Terraglide tracks, Intellisence, Intellisteer guidance, 30’ Varifeed, 2 knives, engine hrs 83, threshing hrs 49 0% Finance & warranty

POA

SULKY X36 fertiliser spreader with hopper extension & cover

www.setchfield.co.uk

£2,975

70790

June 2020 www.farmads.co.uk 167

fg_class_june_20.indd 167

21/05/2020 11:52


J Murrell

01493 750999 info@jamesmurrell.co.uk

2013 NEW HOLLAND T7.210 Auto Command, 7100hrs, F/L & PTO

Contract Farm Services

1996 NEW HOLLAND TX68 2728 drum hrs, 24’ header

£35,000

Due In

2016 MF7718 DYNA 6 2006 VOLVO BL71 EFFICIENT 5745hrs, 4 buckets, 50k, 2400hrs, mint condition extended warranty £48,000

POA

Agricultural Machinery Dealers

McCORMICK C95 MAX KEENAN KLASSIK 100 2000 BENFORD PT6000 5067hrs, all stationary PTO work, BALE HANDLER/MIXER WAGON DUMPER mint excellent condition new tyres, tight

POA

NEW HIGH SPEED JPM 32’ BALE TRAILERS 560 flotations, top spec

£12,200

POA

NEW HIGH SPEED 30’ JPM 27TLL tri-axle, flip over ramps

£15,800

£4,600

NEW JPM 16T DUMP 10 stud, air, load sensing, hyd gate, LEDs

£12,000

TRI-AXLE STEP FRAME SIMBA 6.6M DOUBLE PRESS 4 POST PORTABLE WORKSHOP NEW JPM FAST TOW 1000L NEW JPM 20T DUMP BULK TIPPER cultivation tines, ROTARY VEHICLE LIFTS BUNDED FAST TOW BOWSERS hyd gate, air, L/S 10 stud, 560 steel suspension, HD bogie, new flotation tyres 28.8t capacity flotations r/o sheet £6,000 £4,500 £3,500 £15,200 £5,500

NEW HIGH SPEED JPM 16T DUMP, magic gate, L/S, air

NEW JPM 16T MULTI PURPOSE 2013 ATLAS COPCO XAS67 FARM FORCE 4M FOLDING JPM 24’ 19TLL ramps, magic tail gate, FAST TOW 130CFM FRONT PRESS air & hyd brakes, L/S top spec COMPRESSOR 45 degree rings, vgc £12,900 £14,000 971hrs £4,000 Reduced to £11,000 £5,500

2012 JOHN DEERE 6190R 50k Autopower, f/links, 6509hrs, 95% tyres

£42,500

STRIMECH PRO-AG MUCK FORK GRABS, BUCKETS & TIP SKIP

In Stock

2003 DEFENDER TD5 BESPOKE FULL REBUILD show car,

£24,000

NEW JPM 28’ 19TLL hyd flip over ramps, 10 stud, air & L/S

£12,980

59 REG BATEMAN RB26 6114hrs, 36m VG booms, refurbished, GPS, mint

For more pictures and further details of our stock visit our website www.jmurrell.co.uk

We are JPM Trailers’ East Anglia Dealer J Murrell • Willow Farm • Norwich Road • South Burlingham • Norwich • Norfolk NR13 4EZ

07770 692891

£65,000

All prices + VAT

71535

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Norfolk Farmers

168 www.farmads.co.uk June 2020

fg_class_june_20.indd 168

20/05/2020 15:51


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

Justin Brason Pest Control

DOWDESWELL ploughs, DP7 4 furrow & DP7D 4 furrow. POA. D Leigh Tel 07502 661861 (Northants)

POTATO EQUIPMENT

Contact Justin for more information on

METAL storage bins, heavy duty construction, 3 with hinged lids, 3 with sliding lids, sloping floor with a removable front panel, 700 x 700 x 1100mm high. £80 each no VAT. D Ivens Tel 07969 877834 (Northants)

35-71845

FREE OF CHARGE

07508 949815 justin.brason@gmail.com Suffolk • Norfolk • Essex • Cambs

PLOUGHS

ANYONE interested in a freezer cabinet amount of wheat/barley agrochemicals, all with current MAFF numbers, following a change in farm policy? If so, please ask for a list, please phone or email John at johnfmcglashan@ gmail.com. J McGlashan Tel 01787 269297 (Suffolk)

RABE Super Albatros 140VI 6f plough, 2012, 5f +1, owned & operated ourselves since new, no welds or cracks, manual variwidth, all metal with plenty of life left, ready for next use. £8,800+VAT. J Sills Tel 07398 716782 (Suffolk)

3ft Herbert Grader with stars, as is or fully refurbished

Pace Stitching Line, Bag Placer and Weigher Walthambury 720 Mechanical Weigher

EW

TITAN Palletising System

MARTIN Lishman Harvester Mister potato harvester water applicator. Offers. J Spinks Tel 07970 549009 (Norfolk)

N

FURROW press towing arm, taken off Dowdeswell plough, but would easily be adapted to fit most ploughs. Reasonable offers around £300. D Wakefield Tel 07889 756705 (Cambs) KVERNELAND furrow press, suitable for 3 or 4 furrow plough. £250+VAT. P Freeman Tel 07711 145124 (Lincs) DOWDESWELL DP7E 6 furrow plough, 14" furrows, dead straight. £1,800. G Meadows Tel 07951 111182/01728 660577 (Suffolk)

GRIMME KSA75 potato topper. P Webster Tel 01704 893162/07900 286419 (Lancs)

USED POTATO MACHINERY

KVERNELAND LO 85/300 6f plough, hydraulic press arm, hydraulic depth wheel, hydraulic variwidth, c/w £700 worth of spares. £9,950+VAT. Grendon House Farm Tel 07970 658813 (Warks)

BAG STITCHER SYSTEMS WEIGHING & PALLETISING EQUIPMENT GRADING & HANDLING EQUIPMENT PLC PROGRAMMING SERVICE & REPAIRS

01354 638222

info@agrimech.co.uk www.agrimech.co.uk

TULLOW 8.5 muck spreader, c/w a hydraulic lid. S Childerhouse Tel 07798 907932 (Norfolk)

LEMKEN DL110 4 furrow plough, in very good condition, needs some new metal, no welds, original condition, bargain. £1,000+VAT ono. P Jewell Tel 07944 782957 (Merseyside)

Machinery Ltd

K53Z Range is built for yearround demanding rotating tasks

PEST CONTROL 35-69789

LEMKEN 4 furrow reversible plough, c/w some spare parts. £600. Email mikedcrisp@ btinternet.com M Crisp Tel 07780 926105/01362 691921 (Norfolk)

BEST PRICES

K53 – Europe’s best selling agri box rotator for any handler

for

GRAIN FUMIGATION GRAIN STORE TREATMENTS full coverage GRAIN MONITORING and RODENT CONTROL Call

COMMAND PEST CONTROL

01787 248049

www.commandpestcontrol.co.uk

RANSOMES SCN plough breasts, right hand only, never used. P Waspe Tel 07462 472289 (Suffolk) OVERUM BV397F 3+1 reversible plough, man variwidth, good straight plough with lots of genuine wearing metal spares & 2LH, 2RH legs & bodies, plus more, option of press arm & Rabewerk press, been back up plough for last 5yrs. £1,100 ono. R Dean Tel 07999 038590 (Cambs)

PLOUGH shares (2), found in storage, believed to be Lemken or possibly Ransomes, wrapped in SKH packaging c/w fixings, Part no: 502, new & hopefully useful to someone, can send more pictures if required. £10. T Manning Tel 07812 525703 (Beds)

K80 forward tippler gentle & quick box tipping very adaptable & easy to operate

BOX ROTATORS & FORWARD TIPPLERS

MUCK grab for JCB compact tool carrier, well used, hence price. £400. H Brown Tel 07764 477766 (Cambs)

Broadwater DOWDESWELL MA140 6 furrow plough, 2010, owned from new, always stored under cover. £5,500+VAT. S Andrews Tel 07778 014792 (Herts)

Standen T2 Harvester (2010) Double Omega, 6 man picking table, hyd web & wheel drive ..............................................£35,000 Standen T2 Harvester (2019) 4 man picking table, Double Omega ......................................£140,000 Standen T2 Harvester (2019) picking table, windrow kit £135,000 Standen T2 Harvester (2019) unmanned, Double Omega ......................................£130,000 Standen Unistar Stone & Clod Separator (2018) ex demo, 10 rows of stars & 36mm underweb.....................£49,800 Standen Unistar Stone & Clod Separator (2008) 10 rows of stars & underweb ...............£13,000 Standen Megastar Stone & Clod Separator (2008) Variflow scrubber web, 2 clod mats ................................... £6,900 Standen Powavator 400/200 (2016) speed blade rotors, 4 convex bodies on parallel linkages.................£24,500 Steketee IC Light Camera Hoe (2017) camera guidance for inter row hoeing, 5 or 6 row ...................£18,500 Baselier Topper 2LKB190 (2007) ........................................................... £3,250 Scanstone Triple Bedtiller (2016) .........................................................£23,500 Finance is available on request prices ex works & +VAT

www.standen.co.uk 01353 661111

37-72605

01728 723221 e: broadwatermach@yahoo.co.uk

JOHNSONS semi mounted single row potato digger. new tyres, working order. £275 ono no VAT. R Smith Tel 07748 682081 (Essex)

HEAD ROTATINGFA LD IE E H IN T

GLB 2 row potato ridger, full set of tines, with 2 hoods. £150+VAT. C Anderson Tel 07795 113312 (Cambs)

37-72467

www.broadwaterltd.com

Buy and sell online — www.farmads.co.uk

MUCK & SLURRY

PRIMEX 2000 gallon slurry tanker, 8000L pump, sprung drawbar, 2004 build, Trelleborg 550 tyres, solid tanker. £3,000 ovno. A Brad Tel 07980 824886 (Derbys)

USED MACHINERY

Manter 10000L Weigher with Elevator and Gantry

KUHN Manager 6 furrow plough, in good order with good metal. £4,000+VAT. G Blandford Tel 07973 424473 (Hereford)

WALTHAMBURY potato bag stitcher, with bag elevator, new stitching head. £2,000+VAT. C Anderson Tel 07795 113312 (Cambs) BASELIER 3.8m hook tine cultivator, c/w applicators & crumbler roller. R Wright Tel 07768 954466 (Lincs)

37-69518

MISCELLANEOUS (cont)

June 2020 www.farmads.co.uk 169

fg_class_june_20.indd 169

22/05/2020 09:20


Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

JOHN DEERE 6195

2017, Hours 3159, AutoTrac ready, Direct Drive 50K Transmission, 4600 Processor, 650/85 R38 50% (near side with cuts), 600/70 R28 20%, Front axle 100% diff lock, Belt line HB3 work lights, Rear fender work lights HB3, Power Beyond,

£ 79,500

21010133

POTTINGER HIT 10.11 T TEDDER 2014, 10 Rotor, 6 Arms Per Rotor, 11m Working Width, 2.9m Transport Width, 2.7m Transport Height, 2450kg Gross Weight, 75hp Power Requirement 11009459

£10,000

JOHN DEERE 5080GF 2015, Hours 4626, 24/12 Hi Lo, Transmission 40K, Turnable front fender, Tiltable steering wheel, Air conditioning, Front tyres 10%, Rear tyres 40% 21010340

£19,950

JOHN DEERE 8310R 2013, 5574 hours,4 ESCV’s, 40K Autopower, 600kg Inner Rear Wheel Weights, Air Conditioning, Front Tyres 45%, Rear Tyres 40%

31009714

£78,000

SPEARHEAD 460 2007, Road Lighting. Good condition

11010411

£6,000

JOHN DEERE 8360R 2012, 6000 Hours, 50K, IVT, ILS, MFWD, 5 x ESCV’s, 540/540E/1000, PTO, drawbar, PUH, hydraulic and air brakes, rear wheel weights 205KG per wheel, 600/70R30 90% 710/70R42 90% 31007514

£ 87,548

JOHN DEERE 5100GF 2016, 2465 Hours, Narrow Cab Fruit Tractor, 24x12 PWR Reverser, 3 Point Linkage, Rear Hitch, Working Lights, PTO, Road Lights, 2 SCV’S

11009679

£25,000

MCCONNEL FLAIL 280 2016, 2.8m wide, front or rear mounted, Hydrulic offset, Very Good Condition

31008616

£4,000

JOHN DEERE W550 2013, 555 Engine Hours, 426 Drum Hours, Deluxe Cab, 3 Speed Mechanical Transmission, immaculate condition, chopper chaff spreader, Power Separator, 618R header 11008866

£98,750

JOHN DEERE T550HM

JOHN DEERE T670

Land Level, 2015,1102 Engine Hours, 831 Drum Hours, AutoTrac complete,2630 display, SF 3000, Speed electric shift, Dual range drum, Electric cleaning shoe, 11000lt tank, 25ft R header,Zurn rape extension

11009331

£140,000

JOHN DEERE 2256 1999, engine hours 2174, drum hours 1732 hr, Harvest monitor, straw chopper, 7000l grain tank, Booster Bar

11010292

£32,500

JOHN DEERE 5090GF 2018, 1288 Hours,24F/12R Transmission, 4WD, 40k, 3 x SCV’s Air Conditioning, Pick Up Hitch,68kg Front Weight, 280/70R20 Mitas Front Tyres - 75%, 380/70R28 Mitas Rear Tyres - 75% 11007841

£POA

JOHN DEERE 732 2013 plate, 24m boom, 3200L capacity, 420/5R38

21008081

£24,000

JOHN DEERE T670I HM Hillmaster, 2014, Engine hours 1773 Drum Hours 1196, Extra fine chopper and chaff spreader, AutoTrac ready, 2630 display and SF 3000, Yield and moisture meters, Prodrive 30K, 11000l tank 11009284

£120,000

JCB 4220 2015, 3780hr, Front Linkage, Good Condition, 3 Electric SCV

11010417

£POA

JOHN DEERE 5080GF Year 2012, Hours 5360, 24/12 Hi Lo Transmission 40K, Turnable front fender, Tiltable steering wheel, Air conditioning, Front tyres 25%, Rear tyres 40% 21010336

£17,000

JOHN DEERE 960 2015, 27446 bales, 500/60R22 tyres, Maxicut pick-up with 13 knives, hydraulic brakes, 1000 PTO on six spline shaft, ISOBUS control, compressor roller on pick-up and rear ramp discharge 21007414

£22,500

SUMO DTS DRILL 2014, Working Width: 6m, Transport Width: 3m, Transport Height: 3.7m/4.1m, Transport Length: 7.4m Tank Capacity: 3600 Litres, Coulters: 18, Coulter Spacing: 32cm Weight: 7800kg BBFDTS

£30,000

2012, 1143 engine hours, 774 drum hours, HillMaster, Electric shift tranmissio, 8000 ltr grain tank, Returns monitor, Harvest monitoring yeild and moisture, 620R 20ft header with twin side knife rape extension

£110,000

31008616

POTTINGER HIT 800NZ TEDDER 6 Rotor, 8m working width, Good Working Order, New Guard Fitted, Ready for work

11009909

£5,000

JOHN DEERE 5080GF 2013,Hours: 5886, 380/70R28 MITAS, 280/70R18 MITAS, Deluxe air suspension seat, air conditioning, Adjustable steering position, 24/24,0.5-40KM transmission, Front linkage 31009618

£18,995

JOHN DEERE 5430I 2012, 4029 Hours, 40k, boom 30/15m, Multiple functions hydro handle, Hydrostatic 4 speed ranges, Air seat, Passenger seat, Rinse tank 400L,4000l tank capacit 31007352

£85,000

JOHN DEERE 6930 PREMIUM 2010, 7137 Hours, AutoQuad Plus, 40K, TLS, Front Linkage, 4 SCV’s, 325L Fuel Tank, Pickup Hitch & Drawbar, AirCon.

31009734

£35,000

JJOHN DEERE 5050E 2018, 395 Hours,4 Wheel Drive, 9 Forward 3 Reverse, 1 Double acting rear SCV

1009767

£17,500

JOHN DEERE 5090GF 2015, 4584 hours, 4 Wheel Drive 3 SCV’s,Air Conditioning,Front Tyres 50%, Rear Tyres 40%

21008983

£20,500

KUHN GF502 TEDDER 2014, GF502, DigiDrive, Genuine Farm Machine, Good working condition

21008186

£3,250

JOHN DEERE 5820 Year: 2008, Hours 8744, Nokian commercial tyres, Rear 440/80 R34, Front 360/80 R24,PowerQuad 40K, Air conditioning, Panoramic roof, Air seat , 2 SCV, Telescopic hitch , Electric fender controls 11009793

£22,500

Stockbury: 01795 843250 | Framfield: 01825 891111 | Ivychurch: 01233 225775

Call Harry Durrant 01795 502744

www.burdenbrosagri.co.uk

170 www.farmads.co.uk June 2020

fg_class_june_20.indd 170

21/05/2020 10:18


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

Leaders in every field

WARRANTY AVAILABLE

2016, 4253hrs, black met, 50kph, air pressure set, f/axle susp, Premium tool kit, 4 valve package, Power Beyond, f/PTO, auto a/c, power socket set, twin beacons, cool box, 650/65R42 F + 540/65R30 Trelleborg 40% 21045725 £73,000

2017, 50kph, 1660hrs, PTO, hyd pump 152L/min, Super Comfort air seat, roof hatch, LEDs, w/lights, radio/CD/MP3, hitch, wheels 540/65R28 142D & 650/65R38 157D Trelleborg, varioguide std Trimble controller 31044297 £90,000

Fendt 716 S4 Power Plus

MF 7718S Dyna 6 Efficient

2018, 500hrs, 40kph, 3 spools, TLS front suspension, air con, 480/70R28 & 580/70R38 Trelleborg 90% tread 31047948

Challenger 775E

2015, 2600hrs, 40kph, radio/CD, 5 spools, powershift transmission, Trimble RTK steering

£73,500 41048908

Merlo TF 35.7 telehandler

2016, 3350hrs, boom work lights, LED lights, boom suspension, Grammer seat, Michelin 460/70R24, air con

£100,000 21046899

£45,000

Buy and sell online — www.farmads.co.uk

WARRANTY AVAILABLE

Valtra T234

WARRANTY AVAILABLE

WARRANTY AVAILABLE

East Anglia’s first choice for new & used agricultural machinery

MF 7720 Dyna 6 Efficient

2017, 2500hrs, 50kph, 4 spools, TLS front suspension, air con, radio, lighting equipment

£66,000 21048810

Lely Welger RP445 baler

2012

£110,000 21048936

MF 7620 Dyna 6 Exclusive

2014, 4750hrs, Power Beyond, front linkage, 50 speed, 4 spools, Mitas front tyre 540/65R30 90%, Michelin rear tyre 650/65R42 50%

POA 31047405

Fendt 724 Vario S4

2015, 6400hrs, c/w front PTO, Profi Plus, roof hatch varioguide, 50kph, Trelleborg tyres f/ 540/65R30 90% r/ 650/65R42 90%

£51,000 31047560

£78,000

WARRANTY AVAILABLE

21048354

Challenger MT 775E

2015, 2,725hrs, 16 idler weights, 40kph, Data 3 screen, ISOBUS ready, GPS ready, CAT 4 linkage, radio/CD, 18 speed transmission

MF 7716 Dyna 6 Efficient

MF 7716 Dyna 6 Efficient

2017, 2565hrs, c/w FL4323 loader 50kph, cab & axle suspension, 3 spools, 600/65R38 70% & 480/65R28 70% 31048823

MF 4709

cab Essential 4wd, 2018, 268hrs, p/shuttle, super creep14:1 (0.2kph) 1000rpm, elect lift with draft control, std with pivoting f/ fenders, Trelleborg tyres r/ 480/70R34 90% f/ 380/70R24 90%, a/c £64,000 31049114 £34,500

WARRANTY AVAILABLE

2017, 2469hrs, 50kph, cab & axle suspension, 10 x 55kg front weights, air & hydraulic brakes, front pivoting fenders, Trelleborg 480/65R28 & 600/65R38 tyres, Telemetry - AG Command 31048583 £57,000

Challenger MT 765E

3344hrs, 2015, 40kph, 4 spools, SMS, deluxe spec, Trimble auto, powershift transmission, air con, lighting equipment, 50% tread 41048822

MF 7726 Dyna VT

2016, 3600hrs, 50kph, air con, radio, 4 spools, front linkage, Michelin tyres front VF600/60R30 70% rear VF710/60R42 80%

£100,000 41048909

Welger RP445 baler

2013, 29,000 bales, variable chamber, LED road lights, auto lubrication, hydraulic floor, chopper, crop press roller, tyres front 500 rear 5000 70% tread 51048540

RG655C Rogator

2015, 5235hrs, 50kph, 420/95R50 60% Spraybib, monitor, 6200L tank, 18/36M Pommier boom, auto steering, AGI 4 Omnistar, C30OO receiver 41046608

£129,500

WARRANTY AVAILABLE

Fendt 826 Vario

2012, gc throughout, 6700hrs, 60kph, 4 spools, 285 weights, Profi Plus CAB, TLS f/ susp, Guidance ready, air con, 600/70R30 Trelleborg 25% tread, 650/85R38 Continental 10% tread 31048458 £60,000

£64,500 51046789

Merlo 42.7 telehandler

2017, 2500hrs, pick up hitch, cab suspension, work lights, tyres 460/70R24 30%

£16,500 51048560

Fendt 716

2015, 5275hrs, Profi cab, 50kph, 4 spools, front linkage, air con, passenger seat, vario transmission, front tyres 540/65R28 TB 40%, rear tyres 650/65R38 TB 70%

Fendt 828

£70,000 51047292

3800hrs, 2017, Profi Plus, 60kph 205L hyd pump, basic Trimble, lighting equipment, air con, BKT tyres front 600/70R30 100% rear 710/70R42 95%

POA 51048599

Fendt 724 Profi Plus

2015, 4685hrs, 50kph, 4 spools, radio/CD, climate control, Power Beyond, twin lights, Michelin tyres front 600/60R30 40% & rear 710/60R42 50%

Krone Comprima V150 XC baler

2015, extra cut model, wide pick up, baler kicker, variable chamber, road lights, 500/50-17 BKT, new belts fitted to slates for 2019, crop press roller, bale count 38000

£98,000 51048682

MF 7718 D6 Efficient

2017, 2000hrs, 50kph, 4 spools, TLS f/susp, Efficient cab, air con, bluetooth radio/CD, 850 weights, Dyna 6 trans, LED lights, auto stabilisers, twin beacons, 540/65R28 & 650/65R38 65% tread £87,000 51048522 £65,000

MF 7715 Efficient Dyna 6

2016, 1975hrs, 50kph, a/c, 4 spools, MP3, f/linkage, guidance ready, Datatronic 4 Isobus, video & dual control, multi function joystick, a/brake, twin beacons, Trelleborg f/ 540/65R28 90% r/ 650/65R38 90% £13,500 31047758 £57,500

Finance options available Prices do not include VAT or shipping

72387

T: 07798 585624 E: jamesclark@tnsgroup.co.uk W: www.tnsgroup.co.uk

June 2020 www.farmads.co.uk 171

fg_class_june_20.indd 171

20/05/2020 15:53


PRECISION FARMING JOHN Deere universal steering wheel kit 200, c/w fittings & harness, etc. £400+VAT ono. J Nott Tel 07957 146325 (Norfolk) TRIMBLE TDL450L radio/repeater, new. £900. S Bartle Tel 07884 238552 (Notts)

SCOTT windrower, 2012, very good condition, Evolution cleaners, self levelling & auto depth, 2 way cross conveyor, camera system, South Lincs. £15,000. D Matthews Tel 01775 640230/07768 245113 (Lincs)

BLACKBURN CHITTING CRATES

REPAIRS, SERVICING & MAINTENANCE

Simon Smith Plant Repairs Ltd

MANUALS als 1000s of manu in stock for all es types of machin

tact Please con info us for more

Agricultural & Plant Repairs

07730 009965 www.sps-parts.co.uk

Coningsby, Lincs

01526 342466

UK agents for Pro-Pak weighing equipment, Oldenhuis & Prinsen & Symach palletisers

07789 793721

Follow us on Facebook & Twitter for the latest new products

37-72119

GRIMME GZ 1700, 1998, wheel drive Multisep, 4 man picking table, Diablo pressure control, 500/6022.5 tyres, 45mm main web new 140 acres ago, 40mm 2nd web new 140 acres ago, Multi sep segments all renewed by Malpas tractors 100 acres ago. B Hurst Tel 07789 902585 (Lancs)

01353 740666

DEER & WILDLIFE MANAGEMENT fully trained, qualified & insured professional hunter services, documents available to prove competence, nationwide services for long or short contracts, discretion assured. Clifton Morris 07737 545024 (Derbys)

Diet Feeder Weighing Systems RANSOMES wearing parts for TS 82/102 slides (swordfish) blades, fronts, skimmers. P Waspe Tel 07462 472289 (Suffolk)

FLAILS DIRECT .CO.UK

STOCKMAN seeking part time work on a self employed basis. A Fairhead Tel 01986 788201 (Norfolk)

QUALITY FLAILS To suit most flail mowers and hedge cutters at competitive prices

37-69564

Suppliers of agricultural hose for: • Crop spraying • Seed drilling • Slurry • Irrigation

01702 460970

½” £0.83 per metre ¾” £1.45 per metre 1” £2.29 per metre

Potato • Onion • Carrot • Parsnip Red Beet • Veg handling equipment Graders (both screen & lift roller) hopper cleaners/graders, brushes, box & big bag fillers/tippers, etc Field equipment Vegetable transplanters, drills, top lifters, toppers, hook tine cultivators Grimme DL/GZ/GT/SE harvesters

Payment prior to collection • Any condition considered Call Lukasz on

07512 821421 or visit our website

www.machinerywanted.co.uk

TOPPER 5’, working order. £550. C Anderson Tel 07795 113312 (Cambs)

46-72122

46-72478

(Flails direct is a division of Engineering and Hire Ltd)

PLASTIC mud guards off a John Deere sprayer, Dunloflex, R51.308, no damage, never been used. Open to offers. J Spinks Tel 07970 549009 (Norfolk)

Perkins 1004/1004.4T

Short Engines

IN STOCK & BUILT TO ORDER

BASELIER 2LKB 190 topper, 2011, good condition, front or rear mounted, South Lincs. £2,750. D Matthews Tel 07768 245113/01775 640230 (Lincs) GLB 4 row potato ridger. £600+VAT. C Anderson Tel 07795 113312 (Cambs) MILL Autoplanter potato planter. £100. J Ramsey Tel 01653 628366 (N Yorks) BREAKING Scanstone, Reekie & Underhaug destoners, various Scanstone 1700 webs available. Call for details. M Anderson Tel 07880 518867 (Norfolk) BASELIER 3.8m inter-row hook tine, in furrow, c/w hood. R Wright Tel 07768 954466 (Lincs)

Also flail mowers for tractors and excavators from 15 to 200HP

SUMO leg protectors, 31 available. £5 each. S Bartle Tel 07884 238552 (Notts)

for agricultural & industrial applications

46-72233

Marian Teodorczyk

CARRIAGE FREE OVER £300 & £10 UNDER

All prices +VAT

FOR EXPORT

SPRAYERS SMALL sprayer (approx 20'), Cat 1 linkage probably, 100gall, bought as part as a job lot, requires a little TLC or tinkering to get to full working order, does hold water & has the PTO pump included. £75 ono. F Johnson Tel 01507 450203 (Lincs)

E-mail: sales@flailsdirect.co.uk Website: www.flailsdirect.co.uk

EUROPE’S BEST SELLING PREMIUM WATER HOSE

WANTED

Tel: 01789 731365

Tel: 01427 718561 Fax: 01427 718016

SALES@LEIGHBAXTER.CO.UK

POTATO spinner spares, Ransomes blade, points, gearbox, depth wheel, Cat 1 & 2. P Waspe Tel 07462 472289 (Suffolk)

David King Electronics www.dkelectronics.co.uk

FLEXIBLE HOSES

Email: info@agri-web.co.uk

Material Handler Joysticks & SLI's

Sprayers & Fertiliser Spreaders

Tel: 028 9127 5913

PEARSON potato quad planter, good condition, South Lincs. £2,000. D Matthews Tel 07768 245113/01775 640230 (Lincs)

Tractor & Combine Controls

Mowers & Foragers

SPARE PARTS REDUCE HARVESTING DAMAGE WITH RUBBER WEB COVERS QUICKSPLICE WEB JOINERS RUBBER GRADING SCREENS PERFORATED RUBBER WASHER BELTS

ELECTRONIC CONTROLS REPAIRED

Balers & Wrappers

SITUATIONS VACANT

sales@davidharrisons.com www.davidharrisons.com

MASSEY Ferguson chisel plough points, some have been hard welded to minimise wear. P Waspe Tel 07462 472289 (Suffolk)

Grain & Precision Drills

Leicestershire based

UR CHECK OUT OTE SI EB W NEW

By Teo

46-72422

Pellcroft Engineering Ltd

Mobile Breakdown & Repairs Servicing & Maintenance of all types of plant Air Conditioning Service & Repairs Hydraulic Overhauls Welding Repairs & Fabrication Full Workshop Facilities

Contact Simon Scott on

42-72420

37-72121

• Prinsen PPM60 Palletiser compact, self-contained capable of up to 9/5tph average at 25kg Ref 6068 • Peal Roller Inspection Table 1.8m long & 600mm wide 3 phase with fixed speed Ref 6131 • Rebuilt Tong Midi Easyfill fully refurbished box filler including new belt Ref 6254 • Rekord ATR60 Elevator with chevron belt, 6m long by 400mm wide, single phase Ref 6321 • Tong 3C Bulker c/w extended 3m hopper & 3m roller inspection table Ref 5838 • Haith Polisher Ref 5452 • Walthambury Weigher 720 Ref 6178 • Walthambury Vee Track Stitcher 3m conveyor, c/w stitcher & automator Ref 4780B

37-69706

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

USED & REBUILT

TRACTOR PARTS & MANUALS

46-69745

POTATO EQUIPMENT (cont)

with oil pump, top & bottom gasket sets & rear & front seals

For engine builds AA, AB, AC, AG, AH, AK, AM Genuine & Aftermarket Perkins blocks & parts available

LEMKEN Terradisc spares, point, front, left & right side soil deflectors. P Waspe Tel 07462 472289 (Suffolk) STOCKS seeder ground radar. £300. S Bartle Tel 07884 238552 (Notts) HYDRAULIC ram 4’ long. £50. G Meadows Tel 07951 111182/01728 660577 (Suffolk)

Agri spec pictured

timikenginerecon

01489 896 626 sales@timik.co.uk

www.timik.co.uk

ROGATOR RG645B, 2012, 36m/24m, 5000L tank, adjustable track width & height, Michelin 710/60R38 (90%) & 380/90R46 (70%), Techneat slug pelleter, 5500hrs, £7,500 boom overhaul, good condition, South Lincs. £77,000. D Matthews Tel 01775 640230/07990 937631/07768 245113 (Lincs) 12-METRE mounted Team sprayer, 750L tank, manual booms, manual on/ off switch, 3 section boom isolators, old but in working order. £480+VAT. J Hatton Tel 07803 721236 (Essex)

172 www.farmads.co.uk June 2020

fg_class_june_20.indd 172

22/05/2020 09:34


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

Hay & Grass Machinery

SUMMER SAVERS

£13,750

41056431 JOHN DEERE 960 2013, Round Baler, 50,800 bales, ISOBUS, AutoGreaser, no knives, side panel damage,

41060443 KRM Pellicano Super 2100 flail, manual brake back, offset, 540PTO, roller, 2.1mtr, 4 belts, 22 flails, 2017

£9,250

11057973 SHELBOURNE HD60T, 6mtr reach, 1.2mtr head, pro cut flails, 3pt linkage, joystick control, 2010

NEW

11059190 JOHN DEERE R950R 2016, Rear mounted Mower/conditioner, 9.5mtr, quick knives, 1000 PTO 6 spline, 2016

£2,950

21060154 TEAGLE Dynamo 8 2019, 8’ rear mounted, rollers fr/rear, hyd sideshift

£6,950

41057377 BOMFORD Falcon 5.5, Forward arm, 1.5mtr head, ICS controls, 3899hrs, boot flails, 2008

£8,950

11059189 JOHN DEERE F310R 2016, Front mounted Mower/conditioner, 3.1mtr quick knives, 1000 PTO 6 spline, 2016

£4,750

£995

11056381 VICON Fanex 763 2008, 6 rotor tedder, rear mounted

11059825 Parmiter Harrows 1995, 16ft manual folding chain link harrows.

£3,850

£495

41058123 BOMFORD B65, 6.5mtr forward arm, axle brackets, electric control box, welding on arm, 1.2mtr head

31056802 BROWNS Flat 8 grab, Matbro/pin cone brackets

MergeMaxx 950 - 4 IN STOCK Capable of gently gathering any kind of forage to retain its maximum feed value. Two independent pick-ups make a total raking width of 7.50 m in single windrow mode and 9.50 m in “central windrow” position.

RRP £72,142 - 2019 PRICE!

FAROL PRICE £52,795

01844 278843 sales@farol.co.uk www.farol.co.uk

USED

Buy and sell online — www.farmads.co.uk

£3,950

£19,950

£46,950

51057330 KUHN 950 2019, MergeMaxx, curtain, 400/55R22.5, control box

Our Milton Common OX9 2NZ Yard Weights NOT included. Prices each,exclude VAT ex yard. Whilst stocks last. Correct 13/5/20 Please check hours and availability. E & OE

June 2020 www.farmads.co.uk 173

fg_class_june_20.indd 173

20/05/2020 15:57


SPRAYERS (cont)

Berthoud Major

GM-R SPRAYERS LTD

47-72584

POA 24m, 3200L, self traking draw bar, Actiflex susp system, auto flow control, air shut off, brand new compressor fitted, Quad nozzle bodies, very tidy sprayer, some welding on boom but of no consequence

SANDS SLC 4000, 24m, 2008 (58 plate), twin lines single & triplet nozzles, 2 sets of wheels 80%, 600R28, 380R30, RDS rate controller, 6100hrs. ÂŁ37,000. W Varnam Tel 07971 432440/01675 481219 (Warks)

MILESTONE SPRAYERS 07850 144244 (mobile 24hrs) rory@milestonesprayers.com www.milestonesprayers.com

HOUSEHAM Sprint 18m self propelled sprayer, 2000L, 5 section rate control function, 2 sets wheels, stored dry & serviced regularly, vgc. K Hodgson Tel 07721 562849/01507 568329 (Lincs)

Boston Crop Sprayers Ltd incorporating

p This month’s star buy Sho ayer soiled GM-R Voyager Spr

VASSGRO S P R A Y E R S

Graham Mitchell-Rowlands 07860 618903 01449 737482 graham@gm-rsprayers.co.uk Marek Technical Support: 07496 294201 Sue Admin: 01449 736300 Holly Bush Farm, Buxhall, Stowmarket, Suffolk IP14 3DP For your new self-propelled, trailed or mounted crop sprayer, to go

Main Agents for

TEAMHYPROTEEJETRDS ENDURAMAXXDUAL PUMPS K

RAYERS IN STOC

NEW & USED SP

USED STOCK Berthoud Tenor 5500L 40m DP Tronic, vgc, 2009, boom could be resized if required ...ÂŁ22,500+VAT Knight 2000L 20m trailed c/w tracking, RDS, 2 sets of wheels 1993, excellent condition .................................ÂŁ6,000+VAT Contact Richard Dix

www.gm-rsprayers.co.uk

47-70065

07770 331587

BOSTON 01205 722 240 WISBECH 01945 461 181 BEDFORD 01525 841 923

www.bostoncropsprayersltd.co.uk

BERTHOUD sprayer, good working order. ÂŁ1,500+VAT. S Goddard Tel 01227 831277 (Kent)

SPRAYTEC LTD Sprayer Specialists in the Eastern & Southern Counties Crop & Amenity Sprayer Specialist Sprayer Specialist in the Eastern & Southern Counties New and used sprayers and parts stocked for:

ATV Hardi sprayer, 12m, Honda 5hp engine, new tyres, all good. ÂŁ2,000+VAT. R Hopkinson Tel 07976 424263 (Lincs)

AGRI SPRAY

SPREADERS LELY Supabowl fertiliser spreader, all in good working order, good working order. J Howard Tel 01994 419472 (Pembrokeshire)

OW

BOOK YOUR TEST N

HYDRAULIC HOSE ASSEMBLIES MADE WHILE YOU WAIT AGRIKEL CROP SPRAYERS

01953 450279 info@agrikel.com Norfolk

www.agrikel.com

Berthoud • Househam Chafer • Agrifac and most other makes Hypro • Teejet • Lechler Altek • RDS • Dual Pumps Enduramaxx • Stocks Fan Jet

SPRAYER, SLUG PELLET AND GRANULAR APPLICATOR TESTING

TEAM Sprayer Sigma, 15m boom, 800L tank, wash down tank, hyd folding, 5 sections, triplet nozzle bodies, 2015, only sprayed 500 acres, like new. ÂŁ8,250+VAT. W Forington Tel 07866 437186 (Lincs)

2004 Househam AR3000 24m sprayer, Trimble CFX 750 screen & EZ Pilot fitted (but not section control), rear camera, rowcrop tyres 90%, LPG tyres 60%, twin nozzles, no potato or fer tiliser work, very tidy for year, photos on request. ÂŁ28,000+VAT ono. S Russell Tel 07771 806831 (Lincs)

47-70043

SPRAYER & SLUG APPLICATOR NSTS TESTING AT OUR LOCATIONS OR ON SITE FULL ON FARM SERVICE & REPAIR

47-69735

ÂŁ42,000+VAT

SPRAYER TESTING on site to National Standards

Agricultural Application Machinery Specialists

4200L 24m, auto steer axle, full GPS guidance, 10 auto section control, NSTS, 12 month warranty!

KNIGHT Trailblazer 24m, 2013, 4200L, Muller comfort terminal & joystick, GPS, 12 air sections, Series 4 booms, 5 nozzle body holders, 340/85-R48 wheels, Pacer fast ďŹ ll pump, pump out valve, test till Dec 20, exc cond, owner driver. ÂŁ35,000. M Parrish Tel 07702 475193 (Beds)

KUHN Aero 24m boom spreader, tested from Nov 2019, micro & fert rollers, all working well, folds as it should, used for OSR auto casting & Avadex, only selling as ordered a new machine, c/w a good range of parts. ÂŁ7,500 ovno. W Needham Tel 01234 711777/07768 721154 (Bucks) HORSTINE Farmery Avadex applicator, 12m boom, mounted on Logic chassis with Honda engine, ball hitch, in good working order. POA. M Hornbuckle Tel 07801 101645 (Leics)

BFS dribble bars (48), purchased in March 2020, only used for one season. T Galloway Tel 07964 669493 (Essex)

Househam AR4000

Contacts: Robert Webb: 07860 801322 Anthony Williams: 07711 947189 Phil Ramsey: 07934 799628 Andy Gemmill: 07802 336880

01279 812727 spraytecltd@btinternet.com

www.spraytecltd.co.uk

LELY 12m spray boom. Offers. N Ward Tel 01733 210366 (Lincs)

ÂŁ37,995 2008, 30m or 36m, 4000L, 7670hrs, IVECO 235hp, auto section control, 3 sets of wheels (Michelins) More photos & full spec at

47-72446

WE ARE NOW CONTINUING WITH NSTS FOR YOUR SPRAYER, GRANULAR APPLICATOR AND SLUG PELLETER DUE TO CURRENT DIFFICULTIES WE ALL FACE, WE ARE OPEN FOR ON FARM OR WORKSHOP SPRAYER REPAIRS WITH 4000 LINES OF SPRAYER SPARES HELD, WE CAN NORMALLY GET YOU UP AND RUNNING QUICKLY OUR OFFICE IS NOT FULLY MANNED AT PRESENT BUT YOU CAN REACH GRAHAM FOR SALES AND SERVICE

47-71765

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

y The Specialist Sprayer Compan

www.writtlefarmmachinery.co.uk

07748 004794 01245 442224(T)

KRM Bogballe M2W fertiliser spreader, Calibrator Uniq controller, 2500kg capacity, good selection of discs, NSTS tested, very good condition. ÂŁ3,500. H Bankes Price Tel 07789 162871/01507 578457 (Lincs)

AGRICULTURAL SPRAYERS SALES SERVICE SPARES

47-69576

01284 724455

HOUSEHAM Super Sprint, 1996, 30m boom, 9341hrs, 2 sets of wheels, reason for sale moving to 36m, has been a good reliable machine. ÂŁ8,750. L Shaw Tel 07949 078781 (Beds) HARDI 4400i sprayer, 2010, 24m, 2 sets of wheels, MOT until January, excellent condition. ÂŁ15,250. J Leigh Tel 07732 599805 (Ches)

SPRAYRANGER SP sprayer, rebuilt in 2013 with new chassis, booms, pump, pipework, wheels & paintwork, 1600L tank, 4 wheel steer & drive, variable rate controller, immaculate condition, must be seen, excellent lightweight machine. ÂŁ22,000+VAT. J Sills Tel 07398 716782 (Suffolk) BERTHOUD Mack 12, mounted, 1200L, 20m, hydraulic levelling, MOT, owner driver. ÂŁ1,200. P Carr Tel 07773 753920 (Essex)

SANDS self propelled sprayer based on DB 995, 24m Landquip aluminium booms, main ďŹ lter, inline ďŹ lters, induction bowl & 4 piston pump, RDS Spraymaster, speed sensor, tyres Michelin 13.6 R36 90%, 11.5â€? fronts, also c/w 24â€? LGP. D Frost Tel 07887 932812 (Norfolk)

KUHN MDS 19.1K spreader, 10–18m spread, hopper extension, Telemat border limiter, had very little use, immaculate condition. £3,400+VAT ono. W Forington Tel 07866 437186 (Lincs)

174 www.farmads.co.uk June 2020

fg_class_june_20.indd 174

22/05/2020 09:43


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

New Machines

CLAAS Arion 650 CIS+ 50kph, Proactive f/axle, air brakes ..................................................................POA CLAAS Scorpion 741 Vari Power telehandler, 4.1t, 7m, demonstrator ...................................................POA JPM low loader trailer, 24’ long, loading skids, sprung drawbar, air & hyd brakes .......................... £10,950 ALPEGO TR 46-280 front/rear, 2.8m flail mower, hyd offset headstock............................................. £6,500 ALPEGO TL 33 -220 verge mower 2.2m working width, hydraulic right hand offset, wide angle PTO ....£6,500 ALPEGO TL 33-200 verge mower, 2m, hyd offset, wide angle PTO ................................................... £6,200 ALPEGO RK 300 Rapido 3m p/harrow c/w Twin Force quick fit tines packer roller 3yr Driveline warranty ..POA ALPEGO/MORO Warrior 200 5f (4+1) hyd variwidth plough hyd transport system ex demo .......... £15,300 ALPEGO TR46 310 front / rear flail mower 3.1 working width, hyd offset, can be set to mulch ......... £7,250 VICON RO-XL GEO 2800 fertiliser spreader, Tellus Go Isobus control box, 2800L hopper, section control, variable rate,Trimflow border spreading ................... (depending on spec required) POA SPEARHEAD Twiga Classic S60 hedge cutter c/w hyd prop controls, 1.2m flail head T or C flail, rotor reverse, arm float. ..................................................................................................................... £17,250

USED Equipment

Brian Cornwell 07899 965066

WE ARE STOCKISTS FOR Deutz Fahr, Krone, Pottinger, Rolland Trailers, Cousins, Honda ATVs and many more

TRACTORS & TELEHANDLERS

15 MF 7620, new tyres, 3200hrs

98 Matbro TS 290, A/C, very tidy

Barroway Drove, Downham Market, Norfolk PE38 0AL

T: 01366 324256/324311 E: pwarner@bwmack.co.uk Out of hours: 07795 845308 • www.bwmack.co.uk

Vicon RV2160 round baler, very tidy

Ancroft Tractors Ltd

New and used farm tractors, combines, farm machinery & forklifts

SPECIALISTS FOR MORE THAN 30 YEARS Claas Rotafeed baler

Amazone Profis-Hydro

ZA-M 3001, SBS, twin disc spreader, Amatron control box, 2013 model, immaculate POA

NEW – old stock MF 7345S, 18’ PF 92 MF 38, 20’, PF, 3000hrs, tidy Claas Variant 180 rotofeed Farmhand 8 bale fork 10 Heath Super Chaser Extra, joystick control Various forks & grapples Krone 870 multi bale 12 Claas 3200 quadrant Vicon RV2160 round baler, very tidy 07 Krone 900 twin rotor rake 13 Krone 1400 twin rotor rake Vicon batwing 9m triple mower Kuhn twin rotor side delivery rake

OTHER EQUIPMENT Dowdeswell DP1 offset 6f Dowdeswell DP7F, 6f, v tidy Dowdeswell DP7F, 7f, v tidy KV LD85 5f & 4f Flat Lift Force – 2 leg HD Buster Lely Hibiscus 855 CD twin rotor rake Pottinger 4m power harrow Pottinger 6m Terrasem drill, ex demo Vaderstad RDA600 Rapid, 6m drill, tidy order Vicon PO-EDW weighcell, vgo Vicon RO-EDW extension hopper Kuhn Axis 30.1 spreader extension hopper Sulky X36 spreader, very tidy Cousins 9.3m Sidewinder

HEDGECUTTERS

Massey Ferguson 7626-EX

Dyna 6, autoguide ready, 64 reg, 4250hrs, 50kph, 4CCLS spools £46,650+VAT

15 MF 7620, new tyres, 3200hrs 96 John Deere 6600, 5145hrs MF 8260 front linkage & PTO 4200hrs Caterpillar 407C telehandler, 7m 3200hrs, tidy 98 Matbro TS 290, A/C, very tidy 03 JCB 540-70, tidy

HARVESTING

71626

Sales contacts

Paul Warner 07795 845308

We supply parts & service for Massey Ferguson Tractors & Combines, Caterpillar Telehandlers plus other makes of Agricultural Machinery

Krone BiG Pack 870 MultiBale

Fella TFS 60 tidy Spearhead Excel 650 hedgecutter Major 2.8 front & rear flail mower

VEHICLES

Massey Ferguson 7618-EF

Dyna 6, 2300hrs, 64 reg, 40kph, 3CCLS spools, suspension, immaculate £47,000+VAT

Fendt 933 Vario

Krone 1400 Plus rake

8100hrs, 09 reg, 5CCLS spools, 60kph, 710/75x42 rear tyres

10 Heath Super Chaser Extra, joystick control

Merlo TF30.9-120

boom suspension, Grammer air seat, 3790hrs, 67 reg, A/C, LED worklights £36,000+VAT

Isuzu 2.5 Dmax Eiger, 15 plate, 54,006 miles Isuzu 1.9 Dmax Yukon, ex demo, Titanium silver Isuzu 2.5 Dmax Utah, 16 plate, Mineral grey, 30304 mileage Isuzu 2.5 Dmax Utah, 17 plate, Titanium silver Isuzu 2.5 Dmax Utah, auto, 13 plate, Mineral grey, 127K mileage Isuzu 2.5 Dmax Blade, auto, 16 plate, Venetian red, 36K mileage Isuzu Dmax Utah, auto, 67 plate, Titanium silver, 36,248 mileage Isuzu 1.9 Dmax Blade, ex demo, Obsidian grey Vauxhall 1.5 Vivaro, 2700LIHI Edition, 69 plate, 13,560 mileage

Merlo TF38.7-120

boom suspension, Grammer air seat, A/C, 3750hrs, 16 reg, PUH £39,950+VAT

Windmill Way West, Ramparts Business Park, Berwick-Upon-Tweed, TD15 1TB

01289 331904 • 07977 916170 72490

Buy and sell online — www.farmads.co.uk

2007 MERLO 34.7 telehandler, 3.4t lift, 7m height, good condition................................................ £18,500 MERLO TF 35.7 telehandler 2016, 3.5t, 1795hrs,7m 40kph boom suspension, pallet tines, A/C, pick up hitch ............................................................................................................................. £39,000 MERLO 34.7 telehandler, 2005 3.4t 7m, high hours, tidy for age & hours ...................................... £10,000 CLAAS Arion 550 Cebis Cmatic, 2016 (66) 795hrs, 155hp, CVT 50kph transmission, f/linkage, 4 spool valves, pro active front axle, cab suspension, excellent condition .................................. £49,500 SUTON ELCS 80 rehandling bucket, Merlo brackets ........................................................................... £975 HARDI Commander 3200L sprayer, c/w 24m booms, triplet nozzles, steering drawbar .................... £8,500 COUSINS 5m double row Landpacker, good condition..................................................................... £6,500 COUSINS 2 leg heavy duty subsoiler, c/w depth wheels ................................................................. £1,200 KONGSKILDE 4m Germinator cultivator, good condition................................................................... £3,000 T&F 8t dropside trailer, hyd brakes, road lights ................................................................................ £1,500 CLAAS Volto 770 Tedder, 6 rotor, 7.7m working width, good ........................................................... £4,500 BOMFORD rear mounted flail mower, 2.8m rear flail mower, hyd sideshift, adjustable rear roller ..... £2,750 FERRI TSE 60 reach mower, 6m reach, 1.2m flail head, rotor reverse, cable controls, 3 point linkage mounted, good condition ..................................................................................... £4,000 SUIRE 9’ topper, 9’ three rotor topper ............................................................................................. £1,150 TORO 216 mower, triple gang cylinder mower, 3 wheel, petrol engine ................................................ £525 SUTON ELCS 70 grain / rehandling bucket with Claas brackets fitted, ex demo, 7’6” wide, very good condition..................................................................................................................................... £1,350 TREMME digging bucket, 7’6” digging bucket with digging teeth, Merlo brackets, good condition...... £975 STRIMECH X Form B27-80 grain bucket, 8’ wide, Merlo brackets, good condition ........................... £1,000 MASCHIO 3m power harrow, 3m working width, complete with packer roller, hyd lifting drill linkage ... £4,000 MASCHIO HM4000 3m power harrow, complete with crumbler roller, hydraulic lift drill linkage ....... £2,500

Mark Weatherhead

72380

B W M ACK (Machinery) LTD.

tom@ancroft-tractors.co.uk • www.ancroft-tractors.co.uk also at Kelso and Macmerry

07885 202005 01954 210355 Hardwick, Cambridge

www.markweatherhead.co.uk

June 2020 www.farmads.co.uk 175

fg_class_june_20.indd 175

21/05/2020 11:53


Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

CLAAS EASTERN

CHALLENGER ROGATOR RG635 £69,500 2011, 2800hrs, 600/65R38 & 380/65R46, 16-30m / 16-24m chafer twin fold steel booms, 3500L tank ZZ1724

CLAAS LEXION 570+ M £93,000 2010, Hillside combine 7.5m vario header, 1586 eng hrs, 1022 drum hrs

AMAZONE UG 3000 SUPER £28,000 2014, GPS receive, auto boom levelling, 420/85R38 @ 1.8m track

CASE/IH TS3000 £9,500 2002, 300/95R46 50%, 6 section shut off, 3000L, quad bodies

AM0352

CI0256

KEITH RENNIE MACHINERY L2 £2,500 2009, 2250L hopper, 24m vanes

VADERSTAD RDA 400S £12,000 2002, system disc, RDS metering

KR1168

VA0016

CLAAS ARION 630 CIS 50K £50,950 2015, 50kph, 160hp, 3300 eng hrs, 540/65R28 fronts, 650/65R38 rears, 3 spools CT2674

CLAAS LINER 4000 HH £51,950 2018, Profix 20 spline heavy duty tine arms, Communicator control box

Tim Smith

Tel: 01529 303093 Mob: 07730 780510

SEE ALL OUR MACHINES FOR SALE VISIT OUR NEW WEBSITE:

www.claas-eastern.co.uk

LEMKEN JUWEL 8 V6 N100 £19,000 2013, CS50 DuraMax bodies, hyd depth wheel, D500 rear disc, hyd front furrow, hydraulic vari width, flexpack press LK0784

CLAAS XERION 3800 VC £76,500 2013, 380hp, 11060 eng hrs, 800/70R38, 5 spools, Xerion 3800 VC, c/w SGT tanker & front fill unit

NEW HOLLAND BR6090 ROUND BALER £9,850 2012, 7621 bales, 2m pickup, 1.2/1.25m bale height

CT2663

NH0356

CHAFER GUARDIAN GUARDEN 3500 £22,000 2011, 420/85R38 wheels, steering axle, load sensing pump, Top Con X20 controller ZZ1742

KNIGHT EUA21AB £10,000 2011, 600/65R34 + 270/95R48, air bag, Quin nozzles, section control

NEW HOLLAND CR9080 ELEVATION 4WD £95,000 2009, 9.00m NH varifeed cutterbar header, 2717 eng hrs, 2170 drum hrs

KN0007

NH0362

AMAZONE AD-P 403 SPECIAL DISC DRILL £8,950 2005, disc coulters, quick release tines, rubber ring packer, clod board, pre-mergence markers, road lights, hydraulic pressure control AM0356

CLAAS 470 £48,000 2003, 7.5m vario header, 3969 eng hrs, 2177 drum hrs

CLAAS ARION 620 CIS 50K £53,500 2016, 50kph, 155hp, 2742 eng hrs, 420/85/R28 fronts, 520/85/R38 rears, 3 spools, front suspension CT2647

CLAAS LEXION 600 TT 4WD £85,000 2008, 9m vario header, 3761 eng hrs, 2348 drum hrs, 4wd CL0016

CLAAS VOLTO 1100 £10,150 2015, 4x 3m swaths or 5x 2.6m, new type max spread system

CL9964

MERLO P32.6 PLUS £27,000 2010, 3464 eng hrs, 400/70/24 MERLO carriage, PUH, pallet fork, hyd locking MO0019

VADERSTAD 400P £7,250 1999, 4m folding, tines levelling boards, pre emergence markers, following harrow, disc coulters VA0019

KUHN HR4003D/ACCORD DAS DRILL £9,500 2006-1998, 4m powerharrow, packer roller, new following harrow tines, 5t hydraulic lift trailer KU0146

CLAAS LINER 2900 £14,500 2017, individual rotor lift, 6 wheel rotor boggies | CL0060

CLAAS LINER 2900 (MANUAL CONTROL) £15,500 2016, twin rotor, 7.4 to 8.2m

JOHN DEERE 12’ DISCS £1,000 12’ discs, pitch adjustment manual

CL0076

JD0409

HORSCH PRONTO 6DC £28,500 2008, levelling board, upgraded packer tyres to 10 ply, new type coulter arms upgraded, seed blockage sensors HO0142

ACCORD DA £500 1998, drill only, rigid 4m, marker arms, following harrow, Suffolk coulters AC0008

LELY HIBISCUS 455 S 2012, single rotor rake

£4,500

CLAAS SCORPION 7030 £23,000 2008, 7100 eng hrs, 460/70R24, Sanderson carriage, air con

LE0068

CL0095

HORSCH TERRANO 6 FG £15,000 2008, 19 sprung mulching tines, rear harrow, rear drawbar with x 2 services, good metal HO0163

CL9736

CL9863

CL0064

72374

176 www.farmads.co.uk June 2020

fg_class_june_20.indd 176

20/05/2020 16:06


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

GRUNDY

Five Mile Lane, Washingborough, Lincs 01522 790720

AGRICULTURAL

2017 2017 2011 2016 2007 1984 2015 2013 1994 2002

McCormick X7.440 Premium with loader, 2600hrs – a really good buy .....................£45,000 McCormick X6.460 (6 cylinder) 143hp, 4000hrs – genuine bargain ..........................£28,000 McCormick MC130/Quicke loader – this is nice – fully serviced ................................£26,500 McCormick X6-430 (130hp) 3900 – new clutch packs – checked & ready................£36,500 McCormick CX95 4wd synchro – a very nice runabout – 95hp .................................£13,850 Case 844XL 4wd – basic & reliable – a good spare tractor..........................................£8,500 Deutz 5090 4wd with loader – super outfit, 88hp – excellent value ............................£19,750 Deutz 7250 TTV – new transmission, 245hp, sold with warranty – superb ................£69,500 Matbro 250 – exceptional for year – drives extremely well.............................cheap at £8,750 Merlo 28.7 – a very reliable & cared for loadall – priced right ....................................£15,500 Outstanding deals on Deutz & McCormick tractors – view in our yard new & demo models – excellent finance & warranty

Ex demo Deutz 6215 RC Shift 226hp, unregd, 178hrs, 50k, 5 ranges, 6spd p/shift & creep, manual, semi auto & fully auto gears, autosteer ready, air cab, air brakes, f/axle braking, Isobus, iMonitor, 5 spools, f/links, Comfort pack, 650/65 R42 & 540/65 R34 tyres 0% finance POA

Demo Dieci Agri Plus 40.7 VS 252hrs, 152hp FPT engine, 4000kg lift capacity, 7m lift height, 40k, vario transmission, air con, pickup hitch

New Bomford Turbo Elite 2700 flail 2.7m, hydraulic offset, skids, roller

Used Teagle Dynamo 245 finishing mower 2016, 2.5m cutting width, very good condition

Weidemann T5522 handler 2016, 2755hrs, 50hp, 30k hydrostatic transmission, lift height 5.5m, lift capacity 2200kg, 425/5018 tyres – all new, very good order

£4,500

Demo McHale V660 round baler with knives – high density high output – extremely reliable – attractive price

Used Weaving Agrimaster XB180 S compact flail 2018, 1.8m cut, manual offset, rear roller very little use

Visit our showroom for Hayter/Stihl/Stiga – all at keen prices

£1,350

0% Finance

£1,250

Ex demo McHale V660 round baler bale size 0.6 – 1.68m (2’4” – 5’6”) 3 belt bale chamber, chopper, hydraulic brakes

£29,000

0% Finance

£59,000

POA

Ex demo Amazone 5002-TS 5m Catros+ shallow stubble cultivator DW roller, hydraulic depth adjustment 0% Finance

£29,750

Visit us on and

Tractors 20 reg 17 reg 16 reg 06 reg 05 reg 13 reg 64 reg 12 reg 04 reg 11 reg 62 reg 05 reg 08 reg 07 reg 04 reg 06 reg 04 reg 11 reg 04 reg 09 reg 09 reg 03 reg A reg 03 reg 04 reg B reg E reg A reg J reg 2015

655777 957735 828639

David Grundy 07879 698473

Karl Gladding 07500 448243

RICHARD TAYLORvel Tra

72614

Machinery Traders, Farmers, Agricultural Contractors & Coach Hire for all Occasions

Selling 2nd hand machinery in 1st class order!

OVER 100 MACHINES IN STOCK

Fountain House, 111 Scawby Road, Scawby Brook, Brigg, N Lincs DN20 9JX

Manitou 73 115 LSU Premium new MF 7718 4x4 Dyna 6 Efficient 50K front linkage 1600hrs MF 7718 4x4 Dyna 6 50K air brakes 900hrs MF 8480 4x4 Dyna VT 5100hrs FL MF 8480 4x4 FS CS Dyna VT 50K 5800hrs MF 7618 4x4 Dyna 6 50K CS FS FL 2200hrs MF 7618 4x4 FS CS FL 5800hrs MF 6499 4x4 Dyna 6 50K FL 5700 FS CS MF 6499 4x4 FS CS Dynashift 8100hrs MF 6495 4x4 FS CS FL 6900hrs Dyna 6 MF 6490 FS CS 4200hrs MF 6490 4x4 5300hrs MF 6490 4x4 CS 2800hrs mint condition MF 6490 4x4 FS CS 7400hrs MF 6490 4x4 Dyna 4 7000hrs MF 6480 4x4 FS CS 4800hrs MF 6480 4x4 CS 7250hrs MF 6475 4x4 CS 5000hrs MF 6460 4x4 CS 5400hrs MF 5480 4x4 FS push out hitch Dyna 4 6500hrs MF 5475 4x4 CS Dyna 4 5800hrs MF 4345 2x4 6400hrs MF 698 4x4 Multipower 5000hrs JCB 2135 Fastrac 4ws 5000hrs Manitou 741/120 4x4, 4400hrs Ford 7710 4x4 8300hrs Ford 7610 SQ 4x4 with Quicke loader Ford 5610 2x4 Ford 5610 AP cab 2x4 350hrs Generation 3 Bailey 14t trailer JPM 15t dump trailer

email: kptractors1@outlook.com fax: 01652 651476 www.kptractors.co.uk

STUNNING MODERNIZED ATLAS SHERWOOD SUPER HOME 2 bedrooms, 2 bathrooms, 2 showers, c/heating, double glazing £17,000

HORSCH JOKER 3 CT 2017 STEEL DISC PACKER mono TG bar, LD point, hyd depth adj, 5 acres from new £17,500

VICON FANEX 604 mounted 6 star hyd folding rotary tedder 2013, very little use, excellent condition £5,950

BALING CONTRACTORS 120x90 XD bales

£5/bale

KUHN VKM280 heavy duty flail mower 2013, hyd offset, demo condition

Competitive, fast & reliable service £4,450

FORD TRANSIT MINIBUS 2008, 17-seater, tow bar on the rear, new MOT, very good condition

71527

KP

Tel 01652 Kevin mob 07796 Michael mob 07850

71807

72475

All prices + VAT

Buy and sell online — www.farmads.co.uk

2006 John Deere 592 round baler – good popular model – only..........................................£4,850 2011 Kuhn 2190 round baler – overhauled & serviced – ready for work .............................£12,500 Krone 461 single rotor rake – internal rebuild, 4.6m work width ..................................£3,000 Demo Portequip 30’ bale trailer, 15t, super singles......................................................£7,500 Kongskilde SUCT700, PTO drive grain blower – remarkable condition .........................£6,750 2017 Orsi 609 6m hedger, full electric controls, 3 point fit – nice .........................................£8,000 Tyrer 4t hi-lift trailer – still very useful – only ..................................................................£975 2014 Major 3500gall vacuum tanker – steering axles – super condition .............................£16,000 Maschio 2.8m flail mower, hydraulic side shift – a nice example .................................£3,750 2014 Teagle 9’ topper – shaft drive – this is very good & priced right ...................................£1,400 Countax 18/50 diesel ride on mower – fully serviced ..................................................£2,250 1996 Pottinger MEX6 forage harvester – auto hitch – very tidy.............................................£3,250 Demo Fransgard TI5000 – combination rake/tedder ....................................................£5,950 Wide selection of chain harrows/transport boxes – ex stock Portequip beef feeders/calf creep feeders at knockout prices Teagle fertiliser spreaders – fully rebuilt & ready .................................................from £3,000

Ex demo Deutz 7250 TTV Warrior 246hp, 70hrs, 50k, Vario trans, autosteer, air cab, air brakes, f/axle braking, Isobus, iMonitor, 5 spools, f/links, f/PTO, Comfort pack, 650/65R 42 & 540/65 R34 tyres POA 0% Finance

Hay & Straw Sales STRAW WANTED IN THE SWATH

GRIFFITHS GRAIN TRAILER 14t, hyd tailgate, full spec – commercial axles

McCONNEL DISCAERATOR 3m, 5 leg, auto reset, new scrapers excellent condition

£10,500

2013 VICON ROTAFLOW RD-XL FERTILISER SPREADER excellent condition, maximum capacity £6,950

£5,950 £9,250 t: 01462 442409 • Daniel: 07734 328994 • Ben: 07850 474511 • e: rtaylor2004@tiscali.co.uk St Ibbs Farm • St Ippolyts • Hitchin • Herts • SG4 7NL

PART EXCHANGE WELCOME

www.richardtaylortravel.co.uk

Ex works • All prices + VAT

June 2020 www.farmads.co.uk 177

fg_class_june_20.indd 177

21/05/2020 12:53


STEEL bunded 2500 gallon storage tank with pump, has been used for DERV storage. £1,450+VAT. K Ollett Tel 01359 270047/07753 859881 (Suffolk)

S SCOTT & SONS Ltd All types of steel available new and secondhand 00-66977

Posts for grain walling and silage clamps

Galvanised roofing sheets, box profile and corrugated

01359 269378

49-71820

STRAW & HAY

Very good prices paid promptly

P J Reed

07977 268113 (T)

Call Jeff on

SMALL bales of seed hay, suitable for horses. £4/bale. D Habgood Tel 01327 260620 (Northants)

FOR SALE & WANTED

tines, levelling board, double press, ex-demo, 2019

WANTED off the field & throughout the winter

www.thekinggroup.co.uk/tanks 01638 712328 Suffolk 01992 451629 Herts/Essex SMALL metal tank, no rust. £20. G Meadows Tel 07951 111182/01728 660577 (Suffolk) TWO diesel tanks, one 3000L & other 5000L, with electric pumps & gauges. £500 each ono. R Hopkinson Tel 07976 424263 (Lincs)

www.louthtractors.co.uk Philip Stephenson

VADERSTAD TopDown TD500, 2019, 470mm Truecut discs, shin with 50-80mm points, single steel runner, cultivator tines, hydraulic stone release, ball towing eye 71mm, done one season – around 600ha. £49,500 ovno. D Wakefield Tel 07889 756705 (Cambs)

07715 077924

GALUCHO 6m Toptilth, trailed heavy land seedbed cultivator, heavy duty levelling board, 2 rows pigtail tines, packer roller, 2 rows pigtail tines. £6,250. P Adcock Tel 07770 602127 (Suffolk)

Used 20,000 litre 4400 gallon GRP ex Winery Storage Tank

01284 810751 07768 353910

£1,500

WANTED 49-72256

pad500r@hotmail.co.uk

HAY, good 2nd cut seeds, 120x90 bales, seeds hay 80x90 bales & meadow hay 80x90 bales, all made June 2019. L Rich Tel 07774 112211 (Glos)

For more information:

sales@tanksandvessels.com

01302 867328 ARTIC tanker trailer, 3600 gallon, 2 compartments, has been used for gas oil storage. £1,250+VAT. K Ollett Tel 01359 270047/07753 859881 (Suffolk)

Kuhn Power Harrows Drills & Accord d New & Usees par Machine Sep & R airs

01636 700608 07860 637654

Call Andrew Lloyd

07787 551081

e: info@andrewguest.co.uk

www.andrewguest.co.uk

ABBOTT & CO (Wessex) LTD

NRH 4m front press, good condition, chain scrapers, recent tidy up, c/w a tow frame, so it can be used as a trailed single press also. P Weston Tel 07947 923845 (Northants)

VERY heavy duty robust tank & stand, last used for molasses, 4" gate valves. £500. J Gibson Tel 07931 930369 (Notts)

HAYLAGE, good quality, triple wrapped, 4' round bales, can load. £20/bale. F Ivens Tel 07969 877834 (Northants)

FARMFORCE 4m double press, very good condition, folding, minimal wear, good transport wheels. P Weston Tel 07947 923844 (Northants)

TANKS 50-69994

01603 870903 07860 475964

COUSINS Packa-Rolla press, 4m folding, leading tines, had little use since recent overhaul, road lights, can be trailed behind 4m machinery. £4,500. P Adcock Tel 07770 602127 (Suffolk)

COUSINS 12' 5 row dutch harrow, c/w crumbler roller.£350+VAT. P Freeman Tel 07711 145124 (Lincs)

Are buyers & sellers of

HAY & STRAW

CHEVAL 6m hydraulic folding zig zag harrows with brand new 10" tines, owned from new & had very little use, hence reason for sale, as good as new condition, also includes spare set of new tines costing £960. £4,750+VAT. P Skinner Tel 07711 405100 (Northants)

Andy Guest

prefer big bales SMALL bales wheat straw, approx 900 bales, barn stored. £2/bale. M Hodgetts Tel 07946 146395 (Worcs)

HEVA 4m combi lift & disc roller, 2010, 7 shearbolt legs, hyd lift discs, hyd depth legs, soilmatt, 600mm packer, lower link drawbar. £12,500+VAT. G Nichols Tel 07879 472607/07905 298223 (Cambs) 51-69984

BEST PRICES PAID

50-72072

49-69802

RAPE, WHEAT & BARLEY STRAW STRAW IN THE SWATH WANTED for home market & export

COLLECTION & DELIVERY arranged

Sumo MultiPress Cultivator

POA

22,730 litre bunded tanks 17’L plus cabinet x 9’2”W x 8’H gauge & battery alarm

WHEAT, BARLEY & RAPE STRAW also SOFT MEADOW HAY

Delivery service

RUBBER ribbed packer 4m, c/w scrapers & bearings off a Maschio power harrow, good condition. £700. S Bartle Tel 07884 238552 (Notts)

51,000 litre horiz/cyl dished ends 27’6”L x 9’W x 10’H & cradles 1 x twin & 2 x single compart

HAYLAGE good quality, in round McHale Fusion bales, 6 layers of wrap. £20/bale. S Gadsby Tel 07866 245615/01246 278985 (Derbys)

49-70055

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Steel Stockholders

50-70005

TILLAGE TACKLE

51-72520

STEEL

REGAL TANKS INDUSTRIAL STORAGE TANKS HIRE • NEW • USED FIFTY 4' round bales of good quality hay, viewing welcome & local delivery possible. £20/ bale. P Skinner Tel 07711 405100 (Northants)

01502 710100 Fully searchable database at...

www.regaltanks.co.uk

FAST tow Bundie Bowser, 2000L electric pump, good tyres, surplus to requirements. £1,750 ono. A Whitehead Tel 07771 507279 (Norfolk) THREE diesel tanks, 250L, plus hoses. Offers. N Ward Tel 01733 210366 (Lincs)

COUSINS Packa Rolla, 6m, cast rings, leading tines, will go straight to work. £5,000. H Brown Tel 07977 568812 (Cambs) BLENCH pigtail cultivator, 13 tines, hydraulic folding steel wheels, good condition. £1,500+VAT. S Andrews Tel 07778 014792 (Herts)

MASCHIO 4m power harrow, stuffed gearbox, bed has useful parts on it, crumbler. £250. J Hatton Tel 07803 721236 (Essex)

178 www.farmads.co.uk June 2020

fg_class_june_20.indd 178

22/05/2020 09:51


Massey Ferguson 2270XD tandem axle baler new & unused 2018 model in stock

MF 2240 single axle baler new & unused 2018 model in stock

MF 2240 single axle baler, 2012 model, Stock No 679 bale count 88,063, fully serviced, c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one seasons warranty in mainland UK .................................

MF 2160 single axle baler, 2013 model, Stock No 800 bale count 92,338, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one seasons warranty in mainland UK .................................

MF 2190 tandem axle baler, 2013 model, Stock No 808 bale count 48,244, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one seasons warranty in mainland UK .................................

MF 2190 single axle baler, 2008 model, Stock No 826 bale count 70,613, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one seasons warranty in mainland UK .................................

NH BB9090 single axle baler, 2013 model, Stock No 821 bale count 36,904, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one seasons warranty in mainland UK .................................

NH BB9090 single axle baler, 2010 model, Stock No 823 bale count 44,491, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one seasons warranty in mainland UK .................................

NH BB9090 single axle baler, 2010 model, Stock No 825 bale count 58,587, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one seasons warranty in mainland UK .................................

Transtacker 6072, 2015 model, Stock No T60 bale count 54,427, fully serviced, delivered with one seasons warranty in mainland UK ........................................................

MF 2270 XD tandem axle baler, 2015 model Stock No 833, approximate bale count 38,000, fully serviced, c/w hydraulic knotter blower, knotter & chain lubrication, ejector, roller chute, delivered with one seasons warranty in mainland UK ..................................... £70,000

Transtacker 4100, 2019 model, Stock No T66 bale count approximately 12,000, fully serviced & updated to 2020 spec, delivered with one seasons warranty in mainland UK..... £84,000

Buy and sell online — www.farmads.co.uk

the force behind the harvest

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

MF 2290 single axle baler, 2015 model Stock No 835, bale count TBA, fully serviced, c/w hydraulic knotter blower, knotter & chain lubrication, ejector, roller chute, delivered with one seasons warranty in mainland UK ........................................................................... £60,000

Transtacker 6072, 2012 model Stock No T69, bale count TBA fully serviced, delivered with one seasons warranty in mainland UK ................ £45,000

All prices plus VAT

Tel: 01489 896346 Fax: 01489 892188

www.bigbale.co.uk e-mail: info@bigbale.co.uk 72450

June 2020 www.farmads.co.uk 179

fg_class_june_20.indd 179

20/05/2020 16:08


CAMBRIDGE

FARM MACHINERY

www.cambridgefarmmachinery.co.uk

Väderstad RDA400S Drill Refurbished Väderstad RDA600S Drill Refurbished

Väderstad RDA800S drill Refurbished Väderstad Carrier CR650CB Ex Demo

Väderstad Topdown TD500 Refurbished Väderstad RST 630 Twin Press Ex Demo

Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Vaderstad Väderstad Väderstad Väderstad Väderstad Väderstad Opico Rapidlift Rapidlift Rapidlift Rapidlift He-Va He-Va Köckerling Köckerling Köckerling Köckerling

Köckerling Vector 6.2m Ex Demo

RD 400F Drill 2001 RD 600F Drill System Disc or System Tine Set of System Discs to fit RD 600F drill RDA 400S Drill 2003 RDA 400S Drill 2014 RDA 400S Drill 2010 RDA 400S Drill 2015 Refurbished RDA 600S Drill 2002 RDA 600S Drill 2019 Ex Demo RDA 600S Drill 2012 RDA 800S Drill 2002 RDA 800S Drill 2004 RDA 800S Drill 2013 Refurbished RDA 800S Drill 2018 RDA 800S Drill 2019 RST 450 Twin Press RST 630 Twin Press Ex Demo RST 630 Twin Press RST 830 Twin Press TopDown TD300 TopDown TD500 TopDown TD600 TopDown TD700 NZA 600 6m Cultivator NZA Extensions to fit 7m & 8m Cultivators Rear Drawbar to fit TopDown Carrier CR500 CB Carrier Tines & Crossboard to fit CR500 Carrier CR650CB Ex Demo Carrier CR650CB 2018 Variocast Electronic RRP £7,122 our price £4,750 RL 400 Cultivating Solutions RL 600 to fit a Väderstad 6m Drill Demo Unit RL 600 to fit a Väderstad 6m Drill Second Hand RL 800 to fit a Väderstad 8m drill Combi Disc Roller Contour RRP £43,000 Special Offer £30,000 King Roller 16.3m 24" diameter Allrounder 6m Cultivator Ex Demo Jockey 6m Drill Vario 7.5m Cultivator Vetor 6.2m Cultivator Ex Demo

HE-VA Disc Roller Contour 650 Twin Roller Ex Demo

71023

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

01223 870016

Church Road, Hauxton, Cambridge CB22 5HS

cfm.sales@cambridgefarmmachinery.co.uk

Main Dealer & Service Centre

Refurbished VÄDERSTAD Machinery Available

180 www.farmads.co.uk June 2020

fg_class_june_20.indd 180

20/05/2020 16:09


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

Holtractors Ltd 2012 JD 6125R c/w JD H340 Loader 3600hrs, 50K, air brakes, TLS f/axle & cab susp, 125hp boosts to 145hp, r/tyres 65/70%, f/tyres 50%, p/seat, our own tractor in

2016 JD 6120R Autoquad 500hrs, 120hp boosts to 140hp, TLS f/axle/cab susp, 50K, Starfire 3000, autotrac ready, beltline & loader lighting, JD623R loader, Command

JD 6830 2011 3583hrs, very good condition

2015 CX5080 c/w 6m header & trolley 1 owner/driver, straw/chaff spreader, immaculate condition, 480 engine hrs, 390 drum hrs, side knife

2019 Spearhead 460 topper as new, c/w mulching kit

| 30+ tractors: Ford • NH • MF • JD • IH • Case | 30+ balers always in stock: Welger • NH • JD • IH • Claas • Hesston • Gallignani • Bamford • Deutz-Fahr | 20+ mowers in stock: Lely • Pottinger • Vicon • Kverneland • Taarup • JD • MF • IH • Ransomes • Deutz-Fahr • Tallis | 30+ tedders, turners, rakes, mowers, toppers, forage wagons | 15+ hay grabs, accumulators, transporters | 30+ trailers 3t–30t: agricultural, commercial, construction, dump, hay, general purpose, grain, silage, livestock, horsebox, dual purpose, plant, tippers | 30+ toppers, flail mowers, etc | 15+ ploughs | 50+ discs, cultivators, drills | 10+ 360o excavators/dumpers • Volvo • JCB • Hyundai • Hitachi • Benford

500+ items in stock – please look at our website for full descriptions and photos Breaking Mowers – Tedders – Rakes – Balers

Evenings 01323 840077 • Mobile 07850 851941 • info@holtractors.co.uk

SPECIAL OFFER Visit farol.co.uk/tyres for more stock We can supply leading brands such as:

FREE CHAINSAW WITH EVERY PAIR!

Buy and sell online — www.farmads.co.uk

2019 NHT5-105 c/w MX 406 Loader c/w Euro h/stock, 67hrs, 4wd tyres 99% 480/70-R34, 380/60-R24, in as new condition, NH Warranty up to December 2021

www.holtractors.co.uk

72459

VX-Tractor 650/65R42

£1524

each Ex. VAT

Only applies to Bridgestone VX-Tractor tyres in 650/65R42 size, rims sold separately. Free chainsaw will be a STIHL MS 171 while stocks last, no cash alternative. Offer valid until 31st July 2020. Thame, Oxfordshire

01844 277699

Hungerford, Berkshire

01488 649150

Midhurst, West Sussex

01730 819989

tyres@farol.co.uk June 2020 www.farmads.co.uk 181

fg_class_june_20.indd 181

20/05/2020 16:11


TILLAGE TACKLE (cont)

TRACKS

OVERUM discs, 15' hydraulic folding. R Rayner Tel 07808 066655 (Cambs) LELY Culterra, 4m, missing rear packer. Open to offers. S Bartle Tel 07884 238552 (Notts)

RIB rolls, one 10’ & two 8’, can be put together to make a triple set, will sell separately. P Waspe Tel 07462 472289 (Suffolk)

New power harrows New rotary cultivators New flail mowers New spare parts Direct from an importer

more photos and full spec at www.writtlefarmmachinery.co.uk

new/unused, 2018, rear packer roller

51-72521

£10,995

CAMBRIDGE triple gang rollers. £375. J Ramsey Tel 01653 628366 (N Yorks)

www.louthtractors.co.uk Philip Stephenson

Tracks feature: ✔ Fully molded lugs for

TR Smith Ltd

2019 Vaderstad Carrier CRXL 9.25, done one season, excellent condition. £57,500+VAT. H Forsyth Tel 01926 691296/07968 789971 (Warks)

01362 668286

trsmith120@aol.co.uk www.trsmithagmachinery.com

unsurpassed durability and longevity. ✔ Exclusive patented galvanized cables for superior corrosion resistance. ✔ 50% more wires per inch meaning our track is more durable and longer lasting than the competition. For more information contact

52-72547

07715 077924

Eurotrack is pleased to offer Continental Trackman replacement tracks to fit most tractor makes and models. Also available to fit Lexion TerraTrac

MASCHIO

Alpego RK-400 Power Harrow

07748 004794 01245 442224(T)

COUSINS-STYLE heavy duty subsoiler with 5 Tillso Lite legs, front depth wheels & razor ring packer. £5,000. W Gilman Tel 07736 361376 (Rutland)

COUSINS Type 28 Cultipress, 5m width, 2010, very good condition, double DD heavy press rings, leading tines, hydraulic levelling boards. £12,000+VAT. J Sills Tel 07398 716782 (Suffolk)

HARROW

FRONT or rear mounted 19" Cambridge roll with breaker rings, 4.2m wide, good condition, South Lincs. £750. D Matthews Tel 07768 245113/01775 640230 (Lincs)

BREAKERS els od Many makes &spmares new & used

R M Dove

01759 302279 07779 245466 www.powerharrowspares.co.uk

MASCHIO 3m power harrow, 1998, good condition for age, coil roller, owned & operated since new. £2,300+VAT. J Sills Tel 07398 716782 (Suffolk)

RUBBER ribbed packer, 4m, c/w scrapers & bearings, off a Maschio power harrow, 2 ribbed sections missing. £300. S Bartle Tel 07884 238552 (Notts) SIMBA Cultipress 4.6m, 2000, good condition, new DD rings, tine points 50%, hydraulic levelling board, hydraulic rear drawbar & electrics. J Nott Tel 07957 146325 (Norfolk)

FARM FORCE 3.4m trailed double press, c/w Pro-Active leading spring tines, vgc, £2,850 +VAT ono. 07976 794383 (Shropshire).

(THE HARROW KING)

Pan Busters & spirals ALL BLENCH SPARES 454 Herne Road, Ramsey St Mary’s, Huntingdon, Cambs.

51-69817

WIBERG 6m spring tine, twin levelling boards, 3 rows of adjustable tines, good condition. £1,750+VAT. R Chapman Tel 07860 401855 (Lincs)

• Longest Wear Life – provides up to 4 times more wear life than most OEM replacement wheels. • No Bond Failures Guaranteed. • Extend Rubber Track Life – lower operating temperatures, reduce rubber track deterioration.

51-72444

more photos and full spec at www.writtlefarmmachinery.co.uk

SPALDINGS trash cutting discs (5), never been used. £450+VAT. W Gilman Tel 07736 361376 (Rutland)

Tel: 01263 711474 sales@eurotrackltd.com www.eurotrackltd.com

TRACTORS KRM 3m front steering press, weight 1500kg, water ballast weight 750kg, total weight with water 2250kg, had very little use, more pics on FG FarmAds website. £2,995+VAT. P Appleby Tel 07850 317403 (Co Durham)

£25,950

07748 004794 01245 442224(T)

GRANGEWARDS

European Distributor:

VÄDERSTAD Carrier CR500

2014 Cousins 9.3m, 24" plain rings, lights, excellent condition. £9,500+VAT. J Sheppard Tel 07787 408656 (Cambs)

VADERSTAD 6m NZE, levelling board & drawbar, vgc. R Wright Tel 07768 954466 (Lincs)

01733 844590 (24hrs)

GRANGE Farm 2017, 4m fully mounted low disturbance toolbar, 8 legs & front cutting discs, Cat 4 drawbar at rear, c/w rear lighting & hyd connections, used as combi with Vaderstad drill for OSR, exc cond, done less than 1000 acres. £12,000. P Adcock Tel 07770 602127 (Suffolk)

2018, 470mm TrueCut discs, steel packer

MASCHIO Aquilla Rapido 6m power harrow, in good order, little used, 2014. L Munter Tel 07771 626230 (Suffolk)

SUPERIOR AgriTraxx® Polyurethane Midrollers to fit various tracked tractors.

52-72548

POWER

KUHN 3m power harrow, 1000 PTO, gearbox rated to 200hp, 540 & 1000 speed PTO shaft yokes included, packer roller, good tines & condition. £3,000+VAT ono. A Hagues Tel 01482 875282/07413 770063 (E Yorks)

Tel: 01263 711474 sales@eurotrackltd.com www.eurotrackltd.com

CONCEPT 4m Speed Till, 2 rows of pigtail tines & packer, then another 2 rows of tines & second packer. £1,400+VAT. P Freeman Tel 07711 145124 (Lincs)

www.farmads.co.uk

MF 7626

Dyna 6 Exclusive, 2014, 4600hrs, f/linkage & PTO, 50Kph, f/axle & cab susp, air brakes, guidance ready data 4, 4 x 250kg wheel weights, 650/75/38 & 540/65/30 Kleber tyres at 70% good, immaculate

LLANSILIN TRACTORS LTD AGRICULTURAL ENGINEERS

01691 791460

53-71753

51-72556

2014, c/w Crossboard, 510mm TrueCut discs, a nice example

KEEBLE Progressive, 2013, 6m, Tillso mono wing s/soil legs, DD packer, discs, Toptilth spring tines or original c/sweep tines. £17,500. A Whitehead Tel 07771 507279 (Norfolk)

51-70059

£27,995

51-72507

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

VÄDERSTAD Carrier L 525

Trackman Rubber Tracks

182 www.farmads.co.uk June 2020

fg_class_june_20.indd 182

22/05/2020 09:58


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

Peacock & Binnington’s Quality Used

Machinery

Brigg - Corringham - Halsham - Louth - Selby £55,000

£74,500

£132,000

2017, MF7726 D6 EX

2017, FT939

Ian Hopper: 07774 296379

£46,900

2018, JCB 527/58

2015, MF5612 D4 ES

2015, MF9380

50kph, 150l/Min Hyd Pump, 4 Electric Rear Spools, 4t Front Linkage, Hyd & Air Trailer Brakes, 600/65R28 & 710/70R38. Top Con Gps Unlocked To RTK. 2382 Hours.

Cab Suspension, MF956 Loader, Full Service History, 540/65R38 & 440/65R28 Excellent Condition 3762 Hours.

30ft Powerflow Table, Side Knife, Yield & Moisture Meter, 900/55r32 & 600/55-26.5, 1083 Engine & 569 Rotor Hours, Excellent Condition 1136 Hours.

Adam Clubley: 07771 843080

Marcus Bourne: 07774 296390

Andrew Whiteley: 07774 296382

£85,000

710/70R42 & 650/65R34, Full Spec, Balance Of Warranty Remaining To 5500 Hours Or June 2022 Whichever Is Soonest Excellent Condition Throughout. 4180 Hours.

£105,000

£76,000

2015, FT724

Comfort Front Links, 5 Dudk Spools, Front Spool, F&R Free Flow Returns, 152l Pump, Abs Socket, Power Beyond, Cmft Cab Suspension, 2 Beacons, Steer Ready No GPS, No Front Or Wheel Weights, 600/65R28 & 710/70R38. 4686 Hours Richard Cross: 07860 429947

£29,000

2011, JCB 531/70

£119,950

2016, JCB4220

2016, QUADTRAC 580

Front Linkage, Trimble Field Pro Pack, Full Spec, 600/70R30, Excellent Condition. 5511 Hours

30” Tracks, 6 x spools, PTO, LED Lights, Trimble RTK with Radio, Excellent Condition. 5000 Hours

Ian Hopper: 07774 296379

Andrew Walker: 07827 773605

£43,000

2012, JCB 536/70

£29,000

Buy and sell online — www.farmads.co.uk

2015, MF7618 D6 EF

2 Fingertip & 2 Manual Spool Valves, Hydraulic Cab Suspension, Auto Linkage Stabilisers, 3.2t Frt Linkage, Wide Pivot Front Fenders, 540/65r28 & 650/65R38 Tyres, Super Deluxe Air Seat, Bluetooth CD Player. 2127 Hours. Richard Cross: 07860 429947

£37,000

2004, RB25

Low cab, Q Fit Carriage, Air Con, Smoothride, 380/75R20 Tyres Excellent Condition. 590 Hours.

Q Fit Carriage & Tines, 460/70R24 Very Good Condition. 5640 Hours.

Q Fit Carriage, SRS, 460/70R24 Tyres, 40kph, Air Con Good Condition. 4533 Hours.

Bateman RB25 Sprayer C/w 2 x Sets of Wheels, 24M Boom Good Condition. 7700 Hours.

Adam Clubley: 07771 843080

Max Pinney: 07795 128281

Andrew Walker: 07827 773605

Max Pinney: 07795 128281

See A Larger Selection Of Used Machinery Online At: Peacock.co.uk June 2020 www.farmads.co.uk 183

fg_class_june_20.indd 183

20/05/2020 16:12


TRACTORS (cont)

NEW Holland T6080, 2010, 7600hrs, 50kph, full suspension, f/links, good tyres, weight block, 4 spools, low bonnet, great tractor. £28,950. L Rich Tel 07774 112211 (Glos)

Herbst 26' Low Loader

MF7624 Dyna 6, 240hp, 2014, 2550hrs, Efficient spec, 40kph box, owned since new, full dealer service history, low hrs for year, 650 backs & 600 front tyres 50% worn, genuine reason for sale, pictures available on request. £45,000+VAT ono. J Sills Tel 07398 716782 (Suffolk)

MF 8690

to fit AGCO Challenger MT700 A/B Series & Cat/Claas Challenger 35-95

longer lasting & reduced noise levels

LLANSILIN TRACTORS LTD AGRICULTURAL ENGINEERS

01691 791460

CLAAS ARION 650, 2017, 50kph, 184hp, 4068 eng hrs, 540/65R28 fronts, 650/65R38 rears, 4 spools. £53,000. CT2718 Contact Tim Smith 07730 780510

AS 2000L tractor-tow bunded fuel bowser, lights & brakes, vgc. £2,100. A Dunham Tel 07767 248412 (Cambs)

53-72546

JOHN Deere filters, brought for a 7530 but will fit other models, AL221066, hydraulic transmission RE504836 - engine oil RE522878 X2 - RH fuel filter AL169573 X3 hydraulic oil. £300+VAT & postage. R Kerr Tel 07531 574681 (Essex) CLAAS AXOS 340 CX £19,952 2013, 40kph, 104hp, 3244 eng hrs, 440/65R24 fronts, 540/65R34 rears, 2 spools, front weights CT2706 Contact Tim Smith 07730 780510

FENDT 828 Profi Plus, 2015, 2985hrs, dealer serviced, 1 owner, front PTO, Michelin tyres, auto steer ready, excellent condition, genuine reason for sale. £93,000 ono. L Shaw Tel 07949 078781 (Beds)

MARSHALL QM16, excellent condition, just had a full respray/ refurb, inc new electrics/lights, air & oil braking, extra heavy duty thick walled tyres, available end May/early June. £9,950+VAT. A Robinson Tel 07876 711477 (Beds)

WEIGHT block, 3pt linkage fit, ideal for a loader tractor. £130. R Sinkler Tel 01377 270251 (E Yorks)

LOW loader trailer, 16' bed, hydraulic raise/lower, hydraulic brakes, lights. £2,900+VAT. J Browning Tel 07848 460399 (Hants)

Zetor Major 80

£33,495+VAT 53-72603

c/w ZL Loader, brand new, finance available

07748 004794 01245 442224(T)

BALE trailer 25', new steel floor, super single tyres, hyd brakes, lights, strap box. £3,200+VAT. FV Smith & Sons Tel 07973 139483 (Notts)

FRONT weight, 3pt linkage, approx 650kg, with toolbox. £500. G Meadows Tel 07951 111182/01728 660577 (Suffolk)

JCB Fastrac 2170, 2013 reg, 4020hrs, new tyres all round, 2 wheel steer, owned from new. £45,000 ono. I Bleloch Tel 07770 866564 (Warks)

2019, tri-axle, 27 Tonnes, 215/75R17.5, toolbox, excellent. More photos and full spec at: www.writtlefarmmachinery.co.uk

53-71754

£1,300+carriage+VAT

2013, 4700hrs, f/linkage, 50kph, air brakes, f/axle & cab susp, 5 spools, auto guide ready, Data 4, 710/75/42 & 600/65/34 Trelleborg tyres @ 60% good, full MF service history from new, excellent condition

£10,950 54-72447

NEW STAINLESS STEEL EXHAUST SYSTEMS

01263 711474 sales@eurotrackltd.com www.eurotrackltd.com

GULL 8t tandem axle trailer on springs, automatic tailboard & grain chute, 12.5/80-15.3 wheels, good condition for age. £3,100. A Dunham Tel 07767 248412 (Cambs)

JOHN Deere 6170R, 2014, Powerquad, 40k, front & cab suspension, Michelin tyres 700 rear & 600 front 50%, 2900hrs, excellent condition. £49,950. W Beers Tel 01604 781494/07712 435168 (Northants)

FRONT linkage Flexicoil to suit JD 6cyl 6000 Series, brackets, ram, linkage & A frame with JD base weight, no leaks on ram. £400 no VAT. J Almond Tel 07876 652079/01508 520879 (Norfolk)

y an r er le M the ng ilab o lle a a v Chrts a pa

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

FORD 3600 2wd tractor, good condition. £4,100. C Anderson Tel 07795 113312 (Cambs)

TRAILERS

CLAAS ARION 630 CEBIS, 2015, 50kph, 165hp, 5365 eng hrs, 420/85R28 fronts, 520/85R38 rears, 4 spools, front suspension, front linkage, front weights, Eco PTO. £42,000. CT2719 Contact Tim Smith 07730 780510

JCB Fastrac 1000kg rear weight, fastenings included. £300 ono. D Wakefield Tel 07889 756705 (Cambs)

JOHN Deere front weight, bolts on in front of fuel tank. P Waspe Tel 07462 472289 (Suffolk)

WESTERN 10t dump trailer, sprung drawbar, lights & hydraulic brakes, in average condition, heavy duty floor, high tip height. P Gibbs Tel 07967 626527 (Worcs)

Tel: 01360 661001 or 07801 052007

www.gordonagri.co.uk

1000KG Case IH front weight, ex demo condition, c/w clamps to fit Puma & 3p/l fittings to go on front links, front towing eye & pin. £900 ono. R Dean Tel 07999 038590 (Cambs) NEW Holland T8-390, 2012, excellent condition, for sale due to retirement, full RTK GPS guidance, 50kph powershift gearbox, 2650hrs, f/linkage, wheel weights, top spec tractor. £58,500+VAT. J Furness Tel 07973 843230 (Glos)

LORRY conversion 18' long, steel floor, no sides, tandem axle, lights & brakes. C Bigley Tel 01406 540505/07909 910005 (Lincs)

FORD 6410, October 90 reg, 6500hrs, 540/1000, shiftable PTO, good tyres all round & good condition, front weights included. A Hagues Tel 01482 875282/07413 70063 (E Yorks)

JOHN Deere 6135M, 2016, 2100hrs, 1yr Powergard remaining on this JD serviced tractor, on rowcrops presently which are available at extra cost if required, 520/70/38 & 420/70/28s 90% plus, immaculate. £49,000+VAT. R Gates Tel 07801 567027 (Beds)

RICHARD Western 11t tipping trailer with silage sides, hydraulic door & fixed drawbar, 2003, good order, genuine reason for sale. £5,000+VAT. S Muir Tel 01793 710286 (Oxon) HERBST 16t, 20’ low loader, NEW, side tool box. POA. www.mktractors.com. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

STEEL bottomed low-loader 12t, dolly available if required. H Ashton Tel 07831 588318 (Lincs)

WEEKS tipping trailer, tyres OK, screw jack, ideal muck trailer for farm or equestrian use. £600 ono. P McCann Tel 07970 516771 (Essex)

184 www.farmads.co.uk June 2020

fg_class_june_20.indd 184

22/05/2020 10:28


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196 72473

MILESTONE SPRAYERS Protecting Your Crops And The Environment

07850 144244 (mobile 24hrs) • rory@milestonesprayers.com

2005 Berthoud Major 24m trailed 3200L, self tracking draw bar, ACTi flex suspension system, auto flow control, air shut off, quad nozzle bodies, very tidy sprayer, some welding on boom but of no consequence POA

Case SP3000 self-propelled 2000, only 5600hrs, HD boom 12/24m, TeeJet 844 rate control, 2 sets of wheels, boom recirculation, lovely clean sprayer

Amazone UF1200 24m rear fold boom, individual side folding, independent attitude with negative attitude, hull electro hyd, Muller rate control, has been beautifully maintained & cared for POA

Sands 3000L trailed sprayer mint condition, 12/24 alloy boom, no welds, steering axel, 6 section ball valve boom, RDS Delta 34 rate control, quite a rare machine, perfect in every way & ready for work, you will not find nicer POA

Knight ES 3000L sprayer Self Trak drawbar, clean water wash tank, wash down kit, s/steel spray lines, Triplet nozzle bodies, boom re circulation system, Delta 34 rate controller, immaculate, one owner from new POA

2007 Sands SLC3000 s/p 24m boom, Muller controller/ auto boom height control/headland assist, 2/4ws, electronic anti-slip, dual ride susp, 4sp hyd drive, booms blasted & re painted, air over hyd functions, vgc POA

2011 Knight Anglia 3000L very simple to set up & use, Muller controller, 12/24m h/d boom, air shut off, 6 section boom, air bag susp, Self Trak drawbar, been on same farm from new, got to be seen POA

Case TS 3000L 12/24m boom, 4 section, boom recirculation, Multi Trak drawbar switchable from cab, new type 5-way plumbing, clean water rinse system, a real minter POA 72479

Krone EasyCut R280 CV (2011)

POA

Krone EasyCut F32 CV Float (2011)

£6,900

Vigolo MX250 Rear Roller (2020) All prices +VAT

£7,495

Esma ES150T (2018)

£6,000

£33,500

BOOK YOUR KRONE COMPRIMA OR BiG PACK DEMO NOW! www.agprowseltd.co.uk Lower Tolcarne, St Allen, Truro TR4 9QX

www.jbrockandsons.com

FARMET Triton 450PS 4.5m cultivator, 2017 c/w 560mm discs, auto-reset tines, hyd adjust rear levelling discs, steel ring packer with hyd depth control, tine spacing 420mm, working depth 100 - 350mm (bolt-on shares available), 300-375 hp requirement, ex demo ......................... £34,500

Krone Comprima F155XC (2012) POA

POA

Call us for details or see our website for more www.milestonesprayers.com

01371 830353

Krone Swadro 38 (2020)

Woodhams Farm, Cutlers Green, Thaxted, Essex CM6 2RH

FARMET Fantom FX 470 NS 4.7m mounted folding stubble cultivator, 2019 c/w 3 rows of auto-reset tines at 215mm spacing, SDR steel ring packer, tungsten points, mixing shins, 40–150mm working depth, 200–300hp requirement, available for sale or demo .............£17,500

BROCK Super Disc 600 6m Disc/Press, 2020 c/w 600mm discs, mid-mounted turning wheels, hydraulic levelling paddles, double packer, front depth wheels, hydraulic brakes, new & in stock, see video of 6.6m model working .................................................£43,500

BROCK Sub-V 520F 5.2m 9 leg hydraulic folding mounted subsoiler, 2020 c/w 700mm steel ring packer with swivelling scraper bar, 577mm leg spacing, shearbolt leg protection, Cat 3/4 linkage, integral toolbox, available to order ..............................................£18,450

CLAAS Challenger 55, 2000 c/w 9300hrs, 4SCVs, 2 owners, 7/10

McCORMICK MC135, 2007, 3300hrs, JOHN DEERE 8200, 1999, 11800hrs, MASSEY FERGUSON 135, ex own Michelin XM108s, weights, due in 3SCVs, 2 owners, 7/10 use since approx 1 year old

HORSCH 6m Sprinter G+F, 2013, full width front packer, due in

KVERNELAND EG85-300 6f autoreset, 2010, No28s, hyd vari-width

SIMBA 4m SL Disc-Tine-Disc, 2010, wide spaced packer, due in

KUHN 6m Megant tine drill, 2008 c/w SIMBA 6.6m Cultipress, 2012, rigid KEEBLE 4.5m Delta 7 leg subsoiler, hyd levellers, due in tines, hyd levellers, done v.little, 9/10 2013, hyd f/tines, done 600 acres

COUSINS 3.6m Patriot, 2014, 6 legs, hyd discs, Razor rings, done 800 acres

72372

GREGOIRE BESSON 4m Discordon, 2009, 7 tines, rear DD packer, 8/10

Buy and sell online — www.farmads.co.uk

Case TS 3000L 20/21m boom, 5 section boom, Multi tracking d/bar, boom recirc system, clean water rinse, brand new RDS Delta 34i controller, super clean sprayer, one owner from new POA

AMAZONE KG3000 Combi, 2011, disc VADERSTAD RX620 6.2m rolls, 2011 TWB single leg trailed mole, 2020, coulters, low acreage, 599ha, 8/10 c/w 480mm breakers, 9/10 .. £5,950 trash plow, ceramic expander, due in

SUMO Four-1 stubble cultivator, f/discs, reset tines, 800mm packer

COUSINS 5m V-Form, 2004, 9 legs, VADERSTAD 5m TopDown, 2009, 470mm tooth packers, re-furbed ..... £10,500 discs, BROCK 700mm packers, 8/10

June 2020 www.farmads.co.uk 185

fg_class_june_20.indd 185

20/05/2020 16:14


MARSHALL 10t grain trailer, very tidy, sprung drawbar, roll over sheet, wide tyres, used for grain only, hyd rear door + chute. £6,000. R Hawtin Tel 07710 553842/01327 830614 (Northants)

ROWCROP wheels to fit Claas 520 or similar, front hub 220mm, 8 stud holes, 21mm at 275mm centre to centre, rear hub 150mm, 8 stud holes 19mm at 203mm centre to centre, exc condition, rear 320/90R42, front 320/85R28, no cracks or damage. £1,500 ono. R Copley Tel 07814 499124 (Notts)

55-69778

NUGENT P3116H, 3140L x 1616W x 282 fixed sides, rear ramp/door, to carry 3.5t plant or vintage tractor, new 2019, unused, vgc. £2,600. A Towns Tel 07751 917839 (Lincs)

20’ flat trailer

IFOR Williams livestock trailer. 12', twin axle, centre gate, larger wheels. £1,500. E Knight Tel 07968 111310 (Lincs)

FLAT trailer, 28', new floor, no lights, on commercial axles & springs. £1,200+VAT. R King Tel 07929 424474 (Notts)

Formerly

MARKET LEADERS

IN AGRI

TYRES

£3,600+VAT never been used

Andrew H Gemmill 07767 891328 01702 202930

WILCOX grain trailer 14t, very strong, grain tight body c/w grain chute, manual tail door, good hyd rams & brakes, good tines & springs, roll over grain sheet. £1,500+VAT. P Onions Tel 01949 850268 (Notts)

AS 10t tandem axle trailer, sprung axles, swinging tailboard, grain chute, 12.5/80-15.3 wheels, FM small farm only used for grain, still has paint on floor, very tidy. £4,500. A Dunham Tel 07767 248412 (Cambs)

Let us solve YOUR Agri Tyre and wheel problems

OVER 40 YEARS EXPERIENCE

Wheel barrow to Combine we have the answer!

DISCOUNTS FROM 25% GULL 10t trailer with auto tailgate, on 12.5/80-15.3 tyres, all good condition, floor is in excellent condition, no leaks in hydraulics. £3,250. A Masters Tel 07771 521796 (Norfolk)

BUNNINGS diesel bowser, 250gall (1135L) bunded diesel tank, towable with ring eye fitting, 12V electric fuel pump with 6m hose, very good condition. £2,000+VAT. J Sills Tel 07398 716782 (Suffolk)

RICHARD Western bale trailer, 10t carry, 27' (8.2m) long, hyd brakes, nearly new tyres (385/55R19.5), c/w front & rear bale ladders, strap box, twin rear LED flashing lights. £4,900+VAT. H Pearce Tel 07947 344310 (Essex)

All makes sold

Part exchange welcome ARTIC flat trailers, 41', been shortened for convenience of tractor use, air brakes, air suspension, all new LED lights (front, back & sides) choice of 4, dolly not included. £1,550. H Catlin Tel 07931 524599 (Lincs)

Call Stuart on:

GRAIN trailer, 14t, alloy sides, steel floor, grain chute, high speed twin axle, super singles, brakes. £2,100. P Weston Tel 07947 923845 (Northants)

01328 862 332 07736 271058

STOCKS box rim rowcrops, off John Deere 6930, 13.6x48 @50%, 11.2x36 @30%, gc. £1,550+VAT. R Chapman Tel 07860 401855 (Lincs)

ROWCROP set, off Claas Arion, 270/95R36 front 10 stud, adjustable to fit 28cm hubs, Alliance tyres, 340/85R48 rear 8 stud, fixed centres, 22cm hubs, Taurus tyres. £1,000 for the set. D Pridgeon Tel 07771 696001/07771 696002 (Lincs)

•SPECIALISED WHEEL APPLICATIONS

55-69605

IFOR Williams twin axle trailer, 8' x 5', 2000kg, dropsides, new floor. £1,495+VAT ono. R Hopkinson Tel 07976 424263 (Lincs)

54-72472

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

BAILEY 15t Root trailer, 2015, first used 2016 & only ever been used on grains, excellent condition, 560 tyres, sheet, chute, air brakes, hi-viz strips, extra rear lights, mud guards & flaps. £16,750+VAT. www.mktractors.com. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

AW livestock trailer, c/w sheep decks, all aluminium chequerplate floor, LED lights, removable top, c/w ladders. £7,400 ono. R Baldwyn Tel 07970 184954 (Glos)

AGRICULTURAL TYRES & WHEELS

TRAILERS (cont)

•FLOATATION

SPECIALISTS

•ROWCROP WHEEL ASSEMBLIES

•STOCK DUAL WHEELS NEW/USED

•WHEELS AND CENTRE DISKS

•WHEEL MODIFICATIONS •SECOND HAND & PART USED

•PART EXCHANGE CONSIDERED

Colin

Sims

0 805000881 1 3 8 07 205 46 .com

ct Conta

Tel 0ra1ltyresandwheeelsls.com

ltu dwhe agricu resan sales@ riculturalty g .a w ww BOSTON

lodgetyre.com

FIVE Land Rover wheels & tyres. £50. M Crisp Tel 07780 926106/01362 691921 (Norfolk) NORTON 10t tandem axle trailer, swinging tailgate, grain chute, 13.5/75-430.9 wheels, only used for grain, FM small farm no road use, good condition. £4,150. A Dunham Tel 07767 248412 (Cambs) BAILEY 14t root trailer, 2007, rollover sheet, vgc. R Wright Tel 07768 954466/01205 870434 (Lincs) 16-TONNE tipping potato/grain trailer with flotation tyres. £3,800+VAT. C Anderson Tel 07795 113312 (Cambs) RDS Liftlog+ hydraulic trailer weighing system (2), 2013, only used each harvest, good condition, can post/ courier if needed. £850 the pair, could split. R Jenness Tel 07825 305363 (Norfolk) CARTWRIGHT 34’ 2 axle flat artic trailer, 2006. £1,500+VAT. K Ollett Tel 01359 270047/07753 859881 (Suffolk)

IFOR Williams 14' flat bed with sides, ladder rack, ramps, LED lights, ideally wants a new floor. £1,250. H Brown Tel 07764 477766 (Cambs) 2002 13.6m tri-axle curtainside trailer, super single tyres. £1,400+VAT. K Ollett Tel 01359 270047/07753 859883 (Suffolk)

TYRES & WHEELS SET of John Deere wheels to fit 68206830, 18.4x38, 20% & 14.9-R28, 80%. R Syrett Tel 01986 788389 (Norfolk) TWO 385-65R22.5 tyres on 8 stud rims, very good condition. £150 each. J Witherow Tel 01954 267979 (Cambs) SET of 18.4-R38 & 14.9-R28 Goodyear tyres (40%), on solid JD rims, ex 6920. £1,100 ono. R Dean Tel 07999 038590 (Cambs)

PAIR of rowcrop wheels, 8.3-36, Massey Ferguson centres. £200 ono. J Rice Tel 07759 650475 (Suffolk)

TAURUS rowcrops Soil Saver RC95 270/95R/42, approx 10% remaining, ex Agribuggy 2000, used condition, no cuts or bulges, collection preferred, can load. £150+VAT. R Kerr Tel 07531 574681 (Essex) 23.1X26, as new, 12 ply Titan tyres & wheels, off Kioti mini tractor, turf tread, or would suit Hesston baler.£1,100+VAT. R Lane Tel 07831 615912 (Cambs) ONE 400/80-24 teleporter tyre, professionally repaired, good condition. £150. J Witherow Tel 01954 267979 (Cambs)

PAIR of Michelins, 460/70R24. £100. D Pridgeon Tel 07771 696001 (Lincs)

186 www.farmads.co.uk June 2020

fg_class_june_20.indd 186

22/05/2020 10:34


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196

Current Machinery Available For all used machinery enquiries please call Nunzio Rio: 07970 248113

rwcrawford.co.uk FENDT 940MT TRACKED TRACTOR REF:21010288

CHALLENGER MT775E

MASSEY FERGUSON 7382 CENTORA REF:11008946

REF:11009314

CHALLENGER ROGATOR RG645C

FENDT KATANA 65 FORAGE HARVESTER

REF:21010266

REF:21009840

£82,500 + VAT

£145,500 + VAT

£137,500 + VAT

£109,500 + VAT

2018, Approx.1032hrs, 40kp/h, Vario, Guidance Ready, LED Worklight Pack, 30” Ext Ag Tracks @ 70%

2014, Approx.4900hrs, Comfort pack, 16 idler weights, 5 spool valves, Deluxe vrs leather seat, 30” ext ag tracks 60%.

415 E/hrs, 210 D/hrs, 25ft PowerFlow Header, Auto Guide Ready, TaskDoc Pro, Yield and Moisture Monitor.

2015, Approx 2,450, 40kph, 18/30 metre Double Fold Pommier Ali Boom, 5000 Litre Tank, c/w 500 Litre Clean Water WARRANTY REMAINING

Approx. 1800 Engine Hrs, 1250 Drum Hrs, Grass Header, Corn Cracker, PUH not included, Rear Axle Suspension. WARRANTY REMAINING

WARRANTY REMAINING EX HIRE MASSEY FERGUSON 7718 S DYNA VT REF:11009042

WARRANTY REMAINING MASSEY FERGUSON 7718 DYNA VT

MASSEY FERGUSON 7718 DYNA 6 REF: 11010415

REF: 11009231

MASSEY FERGUSON 5713 S DYNA 4 REF:11009905

VALTRA T174 EV REF: 21008830

£86,500 + VAT

£79,500 + VAT

£64,500 + VAT

£53,500 + VAT

£54,500 + VAT

2019, Approx.580hrs, Multi-Pad Joystick, Power Control Shuttle, F/Linkage, Front PTO, Front and Cab Suspension, Guidance WARRANTY REMAINING

Front and Cab Suspension, Front Linkage, Front PTO, Front Spool, Climate Control, Guidance Ready, Air Brakes.

2017, Approx.2500hrs, Front PTO, Front Linkage, Front Axle and Cab Suspension, Air Brakes, 4 Spools, Guidance Ready

2018, Approx.800hrs, 40km/h, Autodrive, Multipad, Air/Hyd Brakes, Front Axle Suspension, Mechanical Cab Suspension

2015, Approx. 5000hrs, 30x30 Powershift,Front Axle and Pneumatic Cab Suspension,Air Brakes, F/Linkage,Air Con, Guidance Ready.

WARRANTY REMAINING

WARRANTY REMAINING

WARRANTY REMAINING

OLD RIDES FARM EASTCHURCH KENT, ME12 4BD

TEL:20 01795 880224 HALL / STAND 100

PARTS AND DISMANTLING COMBINES: JOHN DEERE: T670i, W540, 9580 WTS, 2066, 2264, 2258, 2058, 1188, 1177, 1166, 1085, 1075, 1065, 985, 975, 965, 955, 952, 950, 630, 530, 8820.CLAAS: Lexion 600, 580T, 570T, 480, 460, 440, 430, 218, 118, 116, 115, 114CS, 108, 106, 105, 98, 96, 85, 76, 70 NEW HOLLAND: CR9080, CR980, TX66, TX68, TX36, TX34, TX32, TF78, TF46, TF44, TF42, 8080, 8050, 8040, 1500’s, 133 MASSEY FERGUSON: 7278, 40RS 38, 34, 31, 29, 27, 865, 760, 750, 665, 504.DEUTZ FAHR: 6090, 4090, 4080,4075, M3630, M3610, M2780, M2680, M1002.LAVERDA: 152, M120.CASE: 1660 JOHN DEERE TRACTORS 8520, 8400, 8200T, 7800, 7530, 7430, 6930, 6900, 6800, 6430, 6110, 3650, 3130, 2140, 2040, 1640 FORKLIFTS: JCB: 531-70, 530-70, 525-58, 520-4, 414, 926.CLAAS: Targo C50, K50 Ranger.MATBRO: Telestar, Teleshift, 280, 270, 250 MANITOU: 2600, MLT 633.MERLO: 40.7, 30.6 Multifarmer, 28.7, 26.6. JOHN DEERE: 3800, 3420, 3415, 3200, MASSEY FERGUSON: 8295.TEREX: 250 BALERS: NEW HOLLAND: 1210, 1010S, D1000, BB940, 841, 835, 7070, 750, 740, 654, 650, 644, 640.JOHN DEERE: 680, 644, 592, 590, 582, 578, 575, 550, 342, CASE: RBX435.CLAAS: Quadrant 2200,1200, Rollant 255, 280, 180, 46, 44, Vari, Hesston 4900, 4800, 4750. VICON: LB12000, LB8200, MP800, RV1602 WELGER: D6000, D4000, 520, 435.VICON: LB12000, LB8200, MP800, 1601, RV1602, MASSEY FERGUSON: No.5, 2190, 2170, 2160, 190, 187, 185.SUPERTINO: 60-120 MOWERS: KUHN: Alterna 500. JOHN DEERE: 328, 228, 131, 1360. POTTINGER: Novacat, Eurocat. KRONE: AM20, 32P, AMT 4000CV, Easycut 32CV LELY: Optima 240C. MAJOR: Toppers. FORAGER HARVESTERS: CLAAS: 930, 695, 690, 75

FOR PARTS CALL DAVE 07770814967

USED MACHINERY

John Deere 865M Gator Parts - Many different parts available including Body, Engine, Transmission etc

Case 1680 Axial Flow – 1990, 20ft Header, Trolley, Chopper, A/C, 3691 Hours, Good Working Order

John Deere 2254 - 1998, 20ft Header, Chopper, A/C, 24.5-32 Tyres, 3498 Eng, 3049 Drum, Very Good Con

Hardi Alhpa Plus 4100 Self Propelled Sprayer – 2004, 36m Boom, 4100L, Floatation & Row Crops

New Holland TX66 – 1999, 20ft Header, Chopp & Chaff, Lateral Float, SelfLevelling, A/C, 3472 Hours

Claas 98SL – 1990, Hydro, 15ft Header, Trolley, Chopper, Mercedes Engine, A/C, 2910 Engine Hours

Buy and sell online — www.farmads.co.uk

£189,500 + VAT

MACHINERY SALES CALL JOE 07711 162004

WWW.BURDENBROSMACHINERY.CO.UK June 2020 www.farmads.co.uk 187

fg_class_june_20.indd 187

21/05/2020 10:20


Andrew Guest Ltd

Refurbished Kuhn Power Harrow & Accord Seed Drill Specialists

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Giant Packer Rollers

Roller Kit only £1,950

• Heavy duty rollers • 670mm diameter • Heavy duty 60mm bearings • 250kgs/metre • Aggressive teeth • Cat 3 heavy duty top links • Heavy duty scrapers • Kits for Shakaerators • Kits to suit Spaldings, Cousins, Simba etc.

Rollers can be made to fit any type of subsoiler

3.5m Giant Packer Roller Kits to suit Spaldings 3.5m Flat Lift, 3 only

£2,250 per kit

Giant Roller Kit

for Spaldings 90/150 Flat Lift, 5 only left

3.5m Roller Kit £2,250

£1,950

Giant Roller for McConnel Shakaerators complete kit includes side arms, top links & bearings

3m Roller Kit £1,950

2.5m kit £1,750 3m kit £1,950 3.7m kit £2,500

GIANT PACKER ROLLER SALE

72439

OPENING TIMES:

Monday–Friday 8 am–5 pm Saturday: 8 am–12 noon

Maxi Packer Kits to suit Kuhn – ex stock

Tel: 01636 700608 • Andy mobile: 07860 637654 Email: info@andrewguest.co.uk simon@andrewguest.co.uk www.andrewguest.co.uk 188 www.farmads.co.uk June 2020

fg_class_june_20.indd 188

20/05/2020 16:16


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196 NISSAN X Trail, 2004, 150,000 miles, MOT till 3.3.21, fitted 4 new tyres, new battery, new middle exhaust, got a bit of rust coming on rear wheel arches, mechanically good. £1,000 ono no VAT. H Ward Tel 07771 537155/01485 571020 (Norfolk)

TYRES & WHEELS (cont)

COUNTRY VEHICLES

340/85-R46 Michelin tyres on Stocks dual wheels, excellent condition, c/w clamps. G Grant Tel 07919 811809/07836 799801 (Lincs)

K NEW STOCON O COMING S

340/85-R46 Michelin tyres & wheels, excellent condition, extra thick adjustable wheel centres, previously fitted to New Holland TM/John Deere. G Grant Tel 07919 811809/07836 799801 (Lincs)

Dave Smith:

16.9×38 Stocks Dual wheels, tyres 50/60%. £300 ono. B King Tel 07712 334848 (Essex)

www.bwt.uk.com info@bwt.uk.com

57-71761

mobile 07973 139483

home/fax 0115 965 2204

Fendt/Trelleborg

ROWCROPS 380x90R50 & 380x85R34, on adjustable rims, rims new 2019, front tyres 95% & rears 85%, will fit Massey Ferguson 7718 Dyna 6. £3,250+VAT. P Mahony Tel 07909 903391 (Suffolk) BKT 650/65R38 on 8 stud rim, plus 540/65R28 10 stud on solid rims, tyres fitted new last summer, only done 600hrs, no damage or splits, came off MF 7480. £4,250+VAT. D Treharne Tel 07719 697455 (Northants)

£4,500 01493 750999 Norwich, Norfolk

www.jmurrell.co.uk

55-72542

At BWT we specialise in new and used wheel solutions for Rowcrop, Standard, Dual Wheel & Flotation applications.

RANGE Rover Classic engine/ gearbox/transfer box complete, International 2.8 TDI turbo inter cooled, Brazilian manufacture, bought new some years ago for Classic, done less than 35000 miles, vgc, lots of torque, 35(ish) mpg, ready to refit. R Lane Tel 07831 615912 (Cambs) MITSUBISHI L200, 2011, 83K miles, 8mths MOT, nearly new tyres. £3,500 ono. A Whitehead Tel 07771 507279 (Norfolk)

LAND ROVER DISCOVERY 4 TDV6

£11,500

VEGETABLE EQUIPMENT

including VAT

commercial, silver, 92,000 miles, FSH, MOT, new tyres all round, tow bar, winter pack

GUY FREEMAN ISUZU Rodeo, 2011, only 48000 miles, silver, hard top, tow bar & load liner, one owner from new, new MOT, very good condition. £6,500+VAT. A Hurn Tel 07803 153883/01553 772378 (Norfolk)

Call us now with your requirements

01371 832310

JCB 5 stud rims (4), c/w tyres, XL grip (special service for mining & logging), 20 ply rating, 12.00-24. £2,500+VAT. R Hopkinson Tel 07976 424263 (Lincs)

AGRICULTURAL tyre & 6 stud rim, 12.5/80-15/3, almost new. £75 ovno. D Wakefield Tel 07889 756705 (Cambs) PAIR 11x28 Goodyear wheels & tyres, ex MF 30 drill, slight perishing, 70% tread. £175 ono. B Handley Tel 07821 273987 (Lincs)

SINGLE head Tumoba sprout harvester, c/w canopy. H Ashton Tel 07831 588318 (Lincs)

MITSUBISHI L200 single cab pickup, 2477cc diesel, 2009, 126,000mls, MOT till September, hard cover & towbar available at extra cost, genuine reason for sale. £3,950+VAT. S Muir Tel 07979 593872 (Oxon)

TWO JCB Fastrac tractor rims, 16x34, 37cm centre bore, 12 stud, good condition. Offers. C Frampton Tel 07748 375665 (Somerset)

520/70-R38 & 420/70-R28 Pirelli tyres on Stocks dual wheels, good condition, c/w clamps. £1,500. G Grant Tel 07919 811809/07836 799801 (Lincs)

HARDWICK, CAMBS

Mark Weatherhead

ASA-LIFT & onion kit, good working order, hyd lifting bar & paddle, ploughs & discs, rear roller & sledge, 60” web, Boston. £750+VAT. P Harness Tel 07776 167464 (Lincs)

LELY weeder/comb harrow, 6m, hyd folding, tidy & tines very good, Boston. £650+VAT. P Harness Tel 07776 167464 (Lincs)

16.9-R38 & 14.9-R24 Goodyear tyres & Stocks dual wheels, good condition, c/w clamps. £800. G Grant Tel 07919 811809/07836 799801 (Lincs)

07860 714958

VEHICLES CHERISHED personal number plate, A403 KAY, on retention 10yrs, assignment fee £80 paid, ready to go straight on to a vehicle. £1,000. E Calcott Tel 01827 62265 (Staffs)

TOYOTA Hilux Invincible 4x4, D-4D DCB, 2015 65 reg, 5000 genuine miles, full service history, 2 keys, super condition inside & out, any questions give me a call. £14,750+VAT. A Carvill Tel 07971 482999 (Leics)

Buy and sell online — www.farmads.co.uk

520/85R42 & 480/70R30 rowcrops

57-72544

PAIR of TR110 420/85R34, with some wall cracks but good inside, would suit lighter work than hedge cutting. R Worboys Tel 01284 789241 (Suffolk)

VREDESTEIN flotation tyres, on 10 stud rims, 560/60/22.5, 10mm to 15mm of tread. £1,600+VAT. W Chambers Tel 07733 382459 (Cambs)

Land Rover Defender 110 hard top, 91J, 65,000 miles, blue ........................... £4,995

TOYOTA Land Cruiser, 2005, D4D diesel, 186,000 miles, full MOT to Feb 2021, replacement reconditioned engine at 115k miles, first registered March 2005, 2982cc, CO2 emissions: 243g/ km, gwo, tow bar, new cam belt. £4,500. M Robson Tel 07967 139678 (N Yorks)

SNUGTOP to fit Nissan Navara, early 2000, grey. £275+VAT. S Andrews Tel 07778 014792 (Herts)

LAND Rover 110 twin cab, 2008/57, IW canopy, dark green, 28300 miles only, MOT Nov 19, vgc.£17,000+VAT. R Witherow Tel 07756 414456 (Cambs)

VINTAGE & CLASSIC NUFFIELD drawbar & link arms. POA. D Leigh Tel 07502 661861 (Northants)

June 2020 www.farmads.co.uk 189

fg_class_june_20.indd 189

22/05/2020 10:42


Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

VINTAGE & CLASSIC (cont)

LEYLAND 245 with front loader, including bucket, plus rear forklift, good tyres, Perkins 3 cylinder engine, starts first time, runs well. £3,500. M Ward Tel 07946 344323/01945 700541 (Lincs) RANSOMES 2 furrow reversible, manual turn, UCN bodies, for spares or repair. D Gibson Tel 01162 605141 (Leics) MUIR-HILL 2wd loading shovel, needs TLC. POA. D Leigh Tel 07502 661861 (Northants)

INTERNATIONAL B414, was running when stood up 10yrs ago, but is now seized. C Bigley Tel 01406 540505/07909 910005 (Lincs) 58-72505

Spares, Repairs & Restorations

Specialising in the restoration & supply of spare parts for Classic & Vintage Tractors Parts supplied for all makes & models Proud to be stockists of QTP (Quality Tractor Parts)

T: 07557 977591 or 01328 838864 E: norfolktractors@gmail.com @kevinrix_norfolktractors IH444 tractor with loader. POA. D Leigh Tel 07502 661861 (Northants)

FERGUSON potato baulker, type RDE 20, original Ferguson serial plate & number 2548, all mouldboards & points intact & original. £100 no VAT. J Almond Tel 07976 652079/01508 520879 (Norfolk) LISTER woofler, 99% complete, will do a day's work, would look great restored. £100 ono. F Johnson Tel 01507 450203 (Lincs) IH955 2wd c/w Econ HM3E hedge trimmer, needs TLC. POA. D Leigh Tel 07502 661861 (Northants) JOHN Deere 3130, 1979, T reg, c/w Econ HM2 hedge trimmer. D Leigh Tel 07502 661861 (Northants)

MASSEY Ferguson model 718 automatic 2 row potato planter, working order, for restoration, located in Suffolk. £200. A Keeble Tel 07767 478001 (Essex) DAVID Brown 990 tractor with loader. POA. D Leigh Tel 07502 661861 (Northants) MASSEY Ferguson drawbar to fit 135, 165, etc. POA. D Leigh Tel 07502 661861 (Northants) HORSE drawn carts (2), Smythe drill & binder. R Rayner Tel 01223 880304 (Cambs) VINTAGE Farmall Cub tractor with single furrow plough. £1,500 no VAT. K Ollett Tel 01359 270047/07753 859881 (Swansea)

RANSOMES Sims Jeffries threshing drum, barn stored, spares or repair. FOC. A KeitleyWebb Tel 07940 837158 (Suffolk)

FERGUSON TEF20 diesel, very original, in good working order, c/w roll bar, has original V5 document, reluctant sale, registration: ORM 415. £2,750. K Bristow Tel 01363 772965 (Devon)

IH McCormick S6.1 mounted seed drill, 8' wide. Offers. P Partridge Tel 07775 640801 (Suffolk) TRACTOR & Machinery magazines 2001–2019. B Rice Tel 01449 711294/07729 028922 (Suffolk) VINTAGE dreadnoughts (2) + one spare – vertical stone mills 1920s, 20hp motor engines. R Rayner Tel 07808 066655 (Cambs) RARE IHC Drott, based on IHC BTD5 crawler, too good to scrap, B414 tin work, incomplete but rare. H Ashton Tel 07831 588318 (Lincs)

DAVID Brown Cropmaster 25D, 1949, good condition. £2,750 ovno. H Bennett Tel 01531 890717 (Glos)

THREE horse drawn mowers, one Bamlett, one Bamford & one Deering, ideal for renovation or spares. £150 each or £400 for all 3. E Calcott Tel 01827 62265 (Staffs) LATE Victorian/early Edwardian stable stall, dismantled, out of a country house. £1,000. E Calcott Tel 01827 62265 (Staffs) TASKER Tillage Train disc/tines/disc, just under 10' wide, in working order. £2,850. D Leigh Tel 07502 661861 (Northants) BOMFORD chisel plough, MF chisel plough & MF cultivator just under 10' wide. POA. D Leigh Tel 07502 661861 (Northants) JOHN Deere subsoilers, choice of 3, one shopsoiled, to suit John Deere Q hitch, never used. R Smith Tel 07881 621061 (Cambs)

WEIGHING EQUIPMENT

AVERY weighing scales, with weights. P Waspe Tel 07462 472289 (Suffolk)

WORKSHOP EQUIPMENT

INTERNATIONAL Harvester, 1977, c/w Wolseley Swipe with chains, good tyres, 68bhp, been used for vegetation clearing since I bought it 20yrs ago. C Bacon Tel 07836 731821/01473 310682 (Suffolk)

WORK bench, length 2000, width 1000 & 900 high, height overall height 2620, 3 phase fittings + overhead light, 6mm steel top. £250 no VAT. D Ivens Tel 07969 877834 (Northants)

LAND Rover SWB Series 3, hard top with station wagon rear door, 1972 K reg, tax & MOT exempt, one family since new, in original condition, new clutch & battery, perfect Landie project. £9,950. S March Tel 07860 835995 (Essex) LISTER Blackstone tractor hay rake. £150. J Ramsey Tel 01653 628366 (N Yorks) CLAAS Consul combine, 10' cut, no cab, no chopper, only been used on 18 acre fen farm, for sale due to retirement, barn stored, working order. H Ashton Tel 07831 588318 (Lincs)

CAMBRIDGE roll, made by Lammings of Surfleet, Lincs, 7' wide. £220. J Abbott Tel 07946 344324 (Lincs) FOSTER threshing drum, believed to be November 1939, c/w Ogle straw elevator. C Sheldon Tel 07836 277899/07961 437436 (Notts)

STEEL plate rack, heavy duty construction. £100 no VAT. D Ivens Tel 07969 877834 (Northants) WORK bench & vice, approx 100yrs old, 15' long x 4' wide. Offers. N Ward Tel 01733 210366 (Lincs)

DAVID Brown 1490 with Econ HM1 hedge trimmer. POA. D Leigh Tel 07502 661861 (Northants) RANSOMES Super Cavalier, 13', tidy, 6354 motor, barn stored, ready to go. D Gibson Tel 01162 605141 (Leics)

CASE International 1056XL, classic tractor in good working order, good tyres all round, engine starts well, hour clock showing 9680hrs, very tidy machine, cab interior could be improved but OK, very genuine machine. £8,750 ono. J Woodward Tel 07930 548933/01455 221112 (Leics) FORD 4600, 1976, had new short motor in Spring 2018, has been scraper tractor. £3,250. K Dixon Tel 07974 223602 (Lincs) FORD 4000, 1973, needs restoring. £1,500. K Dixon Tel 07974 223602 (Lincs)

DAVID Brown 995, for spares or repair – dropped a valve in the engine. P Partridge Tel 07775 640801 (Suffolk)

190 www.farmads.co.uk June 2020

fg_class_june_20.indd 190

22/05/2020 11:04


FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 196 Office 01787 211701 Luke 07915 669007 sales@lbgmachinery.com

CLAAS ARION 610 CASE MXM190 JOHN DEERE 6430 PREMIUM NEW HOLLAND TM150 CLAAS 697 ATZ 4wd, 2012, 9500hrs, 4wd, 2003, 6804hrs, 40K 4wd, 2008, 9300hrs, 4wd, 2001, 8921hrs, 4wd, 2006, 7340hrs, cab suspension.......................... £22,500 .................................................. £17,500 50K Autopower .......................... £27,500 front & cab suspension .............. £19,000 3xDSV ....................................... £21,000

71412

FENDT FORMER 456 DN MASSEY FERGUSON 1839 KUHN GF8702TGII DIGIDRIVE FELLA TH13010 VICON FANEX 553 hay rake, 4 rotor hay rake, in-line conventional baler, 8 rotor 8.7m trailed hay tedder, 10 rotor 12.7m hay tedder, 2013.......................................... £11,000 2016............................................ £9,000 2013............................................ £8,500 2013............................................ £4,750 2018............................................ £4,500

www.lbgmachinery.co.uk

All prices + VAT Boxford Suffolk UK

See more at Call us on

2012 KONGSKILDE DELTA HSF300 CULTIVATOR 7 sweep tynes, following discs & large crumbler

TIM HOWARD 3.8M 7 LEG MAXI-LIFT SUBSOILER c/w hyd depth wheels & trailing kit

2004 QUIVOGNE RAP 830 HORIZONTAL FOLD ROLLS c/w 24” breaker rings with contour effect

2012 COUSINS HZ 8.3M HORIZONTAL FOLD ROLLS c/w 22” breaker rings, very little used

2009 RECO FELLA TH900 8 ROTOR 2016 CLAAS VOLTO 800 6 ROTOR HAY TEDDER HAY TEDDER In tidy condition for its age, runs well In very nice order, ready to work

£5,950 + VAT

£7,950 + VAT

2000 McCONNEL TOPPER 8 c/w hydraulic slew behind for transport

2007 TRIMAX PEGASUS 493 ROLLER MOWER c/w 9 rotors, new blades, electric cab controls

2007 BOMFORD FALCON 6T BRACKET MOUNTED c/w electric controls & booty flail heads

2007 JOHN DEERE 6830 TLS PREMIUM c/w large front weight & good Trelleborg tyres

2012 JOHN DEERE 6930 PREMIUM 50K AUTOQUAD 1 owner, air brakes, cab suspension, Isobus

2010 JOHN DEERE 7830 AUTOPOWER 50K TRACTOR air, front links, Isobus, Greenstar ready

2017 CASE IH PUMA 200 4WD TRACTOR 1244hrs, 50k, air, front linkage, Trimble

1998 NEW HOLLAND 8670 4WD TRACTOR c/w Supersteer, HeVa front linkage, 5800hrs

£3,250 + VAT

£26,950 + VAT

2013 GREAT PLAINS 3.5M X-PRESS c/w ST bar & new discs

01763 780440

£13,950 + VAT

POA

£6,950 + VAT

£1,250 + VAT

£42,500 + VAT

£6,950 + VAT

POA

POA

£8,950 + VAT

Buy and sell online — www.farmads.co.uk

MANITOU 735-120 ELITE TWOSE TORNADO HD280 JCB 531-70 AGRI PLUS RECO FERRI ZL20L0E MANITOU MLT 728 TURBO 2015, 2900hrs, 40K 2.8m flail mower, 2014, 2013, 4900hrs, PUH 2m verge mower 1998, 6970hrs .................................................. £38,950 front or rear mounted .................. £3,750 .................................................. £30,000 .................................................... £2,500 .................................................. £13,500

£6,500 + VAT

£24,500 + VAT

70540

June 2020 www.farmads.co.uk 191

fg_class_june_20.indd 191

21/05/2020 09:27


LELY WELGER RV 160 2017 near side door, can be slightly damaged, as is common for them to fly open – Fendt/MF equivalent have the same doors! Distance no problem. Holtractors Tel 07850 851 941 (E Sussex)

ANYBODY breaking a Nordsten CLP seed drill, cassette required, willing to travel. R Baker Tel 07801 557640/01953 850238 (Norfolk) AF45 trencher, PTO driven, in working order. B King Tel 07712 334848 (Essex)

SMALL used spreader, for seed/grass/ fertiliser, for use with quad bike, Logic or something very similar, in good working order. P Waspe Tel 07462 472289 (Suffolk)

Norfolk Farmer wants John Deere 00, 10, 20 & 30 Series tractors

WANTED

01493 750999 Norwich, Norfolk

www.jmurrell.co.uk

MOLE plough required. Barker Bros Tel 07768 286758/01379 384589 (Suffolk) TRACTOR rear tyres, 710/60-42, must be 30% plus; also tractor fronts, 600/60-30, must be 30% plus. M Hornbuckle Tel 07801 101645 (Leics) VINTAGE toy tractors & implements. E Hewes Tel 01858 880036 (Leics)

WANTED STANDING thinning clear-fell or coppice All species & grades Payment over weighbridge References supplied or view previous jobs

Most models required

Please email details to

farm@murrell1.plus.com

07770 692891 www.jmurrell.co.uk

Please email your machine to

info@jamesmurrell.co.uk or call

TIMBER

Zetor tractors

SMALL tractor (Grey diesel Fergie of similar), reasonable price please. M Chapman Tel 07971 940087/01673 843663 (Lincs) MASSEY Ferguson No 3 baler V belt pick up drive pulley. R Penn Tel 01508 499082 (Norfolk)

WANTED

FORD/NEW HOLLAND TRACTORS

1965–2012

JCB TELESCOPICS 1998–2012 BUNNING SPREADERS

D J Davison & Sons Ltd

01359 230075 07932 668303 59-72488

MATCO Monocentra SP precision drill, cell wheels, H281 S & ejectors I/S. M Leek Tel 07946 524241 (Lincs) LOOKING for at least 8 black colour seed placement cassettes to go in coulters on a Kuhn Venta LC302 with Suffolk Accura coulters fitted to make up a missing set, Part no K3001220. M Cooper Tel 07702 375906 (Essex)

WANTED

Volvo BL71 wheeled digger

ROUND BALERS – McHALE, CLAAS, KRONE & WELGER JOHN DEERE TRACTORS 4050 THROUGH TO 4955 sales@robertwraightltd.com 59-70782

TRACK chains & plates for International 125B, plates must be good, chains not important. G Enderby Tel 07768 841908 (Lincs) INTERNATIONAL tractor 674 or 574 engine or tractor. A Mayhew Tel 07836 262787 (Suffolk) REAR discharge muck spreader, 3–4t. D Hammond Tel 07961 881946 (Lincs) RM Speedy Rain 401/405 irrigator. C Jackson Tel 07768 755036 (N Yorks) REEKIE Dominant 3000 main web 40/45. P Webster Tel 01704 893162/07900 286419 (Lancs)

other makes also considered Email info@jamesmurrell.co.uk or call James on 01493 750999

Norwich, Norfolk

www.jmurrell.co.uk

59-72541

07836 540559

0845 180 1272

Do you have a TRACTOR or TELEPORTER? Can you help with SNOW CLEARANCE? Local sites to you - FAST PAYMENT

FORD 10 or 40 Series centre wafer weight, with towing jaw. B King Tel 07712 334848 (Essex) PERROT irrigation reel, 100/500 or 110/500. D Brown Tel 07710 316205/01487 822280 (Cambs)

WANTED

Used Tractors and Good Clean Farm Equipment

ATKIN FARM MACHINERY

NORWICH ROAD DEREHAM

Tel: Dereham (01362) 692104/637332

www.atkin-farm-machinery.co.uk

59-71923

BATTERY operated debudder iron. R Penn Tel 01508 499082 (Norfolk) SINGLE or double leg subsoiler, off farm condition, Norfolk area preferred. J Wilson Tel 07969 219411 (Norfolk) MOBILE home (park home type), must be in good condition, please contact with price & details. C Baskerville Tel 01379 668457 (Norfolk) BLENCH or Cousins 3m pigtail tined cultivator, must have wheels. R Haigh Tel 07968 215777 (Notts)

Caring for our Environment

RUBBER floor mat, steering wheel, swinging drawbar, pick up hitch (just the hook bit), some front weights & the exhaust heat shield, all for a Renault 145-14 TX tractor. C Flatters Tel 01775 640112 (Lincs) 59-72540

59-70050

Tel: 07785 937779 or 01953 454462

snow@ground-control.co.uk

LOOKING for a 100hp 4wd tractor, JD 3050/3350/3650 or Case 5130/40/50, preferably with 40k gearbox, Essex/ Suffolk area, cash buyer. A May Tel 07714 028000 (Essex) ACCORD 3m Air drill to fit Kuhn power harrow, ideally in working order. J Ramsey Tel 01653 628366 (N Yorks) THREE-METRE front mounted steering press with leading tines. R Haigh Tel 07968 215777 (Notts) SMALL batches of rearing calves, delivered South Lincs area, TB4 only, no black & whites. F Wapples Tel 01406 330644 (Lincs) JONES Engineering onion hoover & topper. D Brown Tel 07710 316205/01487 822280 (Cambs) PARTS book for a Volvo ST-257 combine harvester. C Flatters Tel 01775 640112 (Lincs) SMALL to medium sized egg incubator, auto turner if possible, cash waiting, Lincs area preferably. F Johnson Tel 01507 450203 (Lincs) SIMBA 3m Freeflow drill, or just drill frame. A Watson Tel 07939 056255/01262 468279 (E Yorks) MILL (Midland Industries) loader manual trip bucket required for fore end loader on Ford 4000 tractor. S Ash Tel 07831 497328 (Norfolk) AERATOR required, suitable for compact tractor. D Hammond Tel 07961 881946 (Lincs) BINDER for cutting oats in Scotland. W Robertson Tel 01343 545058 (Scottish Borders) ROOT mincer blades, does anyone know if & where you could get replacement blades for an ‘Eclipse’ root mincer? Does anyone have a spare set? D Coe Tel 07867 578854 (Suffolk) 16.9-30 front tyre, must be in good condition. R Baker Tel 07801 557640/01953 850238 (Norfolk) SABRE cultivator (forward sloping tine), any condition. P Mount Tel 0116 269 2526/07530 676354 (Leics) UTV-TRAILED fertiliser spreader, capable of holding 600kgs, please ring with details. A Nottage Tel 07788 727176 (Norfolk) ACCORD Kverneland Mini Air for drilling onions. D Brown Tel 07710 316205/01487 822280 (Cambs) MUCK grapple for telehandler, preferably with Merlo fittings. K Minett Tel 07884 420857 (Cambs)

LOOKING for old Catswhiskers CB radio equipment, either dead or alive; also looking for any other Catswhiskers literature or manuals. N Price Tel 07977 508601 (Essex) PEACOCK & peahen, preferably unrelated, Lincs area if possible. F Johnson Tel 01507 450203 (Lincs) TWO 13.6/12-38 tyres for Leyland 272. M Chapman Tel 07971 940087/01673 843663 (Lincs) 900/60R42 Michelin Axiobib tyre set. S Willis Tel 07849 238754 (Berwickshire) LOOKING for a second-hand deer squeeze crush (Red Deer), please ring with details. A Nottage Tel 07788 727176 (Norfolk) SANDERSON teleporter, 726 or similar, must be in good condition, Diss area, please contact with price & details. C Baskerville Tel 01379 668457 (Norfolk) GFT drying floor kit, to hire or buy, any condition. M Burrough Tel 07860 246156 (Somerset)

Norfolk farmer & contractor requires Fendt Tractors

Email details to farm@murrell1.plus.com

01493 750999 www.jmurrell.co.uk

59-72539

SCRAP METAL All types of scrap combines, sugar beet harvesters, tractors & machinery

59-69727

www.ground-control.co.uk

S Gray Recycling

59-72538

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

www.farmads.co.uk

WANTED

DOOR for John Deere Gator. H Brown Tel 07764 477766 (Cambs) CONCRETE bunker walls, free standing. G Enderby Tel 07768 841908 (Lincs) VADERSTAD TopDown, 4m wide. D Brown Tel 07710 316205/01487 822280 (Cambs) MASSEY Ferguson 135, 165 or 175, any condition, but reasonably priced, runner or non runner. A Gregory Tel 07904 988906 (Essex) ROLLER mill, rollers must be in good condition. P Mount Tel 0116 269 2526/07530 676354 (Leics) PAIR of crop dividers for a Ransomes 801 combine harvester. C Flatters Tel 01775 640112 (Lincs) FORD 1200 tractor cylinder head assembly, also same as Shibaura LEK802D, anything considered. J Clark Tel 07841 873629 (Essex)

o.uk

www.FarmAds.c

hinery, Browse used mac estock liv equipment and

online 24/7

TRACTORS

LIVESTOCK

MACHINERY

COMBINES

192 www.farmads.co.uk June 2020

fg_class_june_20.indd 192

22/05/2020 11:06


Farmers Guide

Recruitment and About People — www.farmersguide.co.uk/situations-vacant

RECRUITMENT and About People Tel: 01473 691888 email: classified@farmersguide.co.uk www.farmersguide.co.uk/situations-vacant Exciting new job opportunities, join the team and grow with us. EXPERIENCED SERVICE TECHNICIAN VACANCY Duties will include the building and PDI of new machinery, diagnostic and service work and repairs to machinery. Attractive packages offered based on experience, including a fully fitted company van. The successful applicant would be provided with ongoing franchise training relevant to specific skills. Additional overtime available in busy periods.

SERVICE TECHNICIAN VACANCY

Applicant requirements: • Agricultural knowledge is an advantage • Computer skills are an advantage but not a necessity • Good communication skills • Good customer relations • Transferable skills welcomed

Covering letter and full CV to matt.boreham@rcboreham.co.uk

ARABLE OPERATOR VACANCY Duties will involve carrying out all farm operations between the Team, including cultivations, drilling and fertiliser spreading. Modern, up to date machinery used on the farm. Excellent remuneration package available based on experience. The role offers good career progression with increasing responsibility. Accommodation available (2 bed house).

As main dealers for Deutz-Fahr, Merlo, Polaris and the recently acquired Kuhn Machinery franchise, this is an exciting time to join the RCB Team.

Applicant requirements: • Experience in all field operations, primarily combining and spraying • PA1, PA2 and PA4 certificates are an advantage, but training available for the right candidate • Driven individual • Teamwork • Good communication skills • Ability to work alone

Covering letter and full CV to richard.butler@rcboreham.co.uk

Initial duties will include service work and the building and PDI of new machinery, with progression as skills develop. Attractive packages offered based on experience, including a fully fitted company van. The successful applicant would be provided with ongoing franchise training relevant to specific skills. Additional overtime available in busy periods.

Applicant requirements: • Agricultural knowledge is an advantage • Computer skills are an advantage but not a necessity • Good communication skills • Good customer relations • Transferable skills welcomed

Covering letter and full CV to matt.boreham@rcboreham.co.uk

PARTS SALESPERSON VACANCY Duties will include serving customers and the identifying, picking and ordering of parts, along with some deliveries. This position would suit a reliable and hardworking individual who is able to work on their own initiative and as part of a team. Attractive packages offered based on experience and the successful applicant will be provided with training.

Applicant requirements: • • • • •

Knowledge of agricultural machinery Excellent customer service skills Good communication skills Enjoy working in a busy atmosphere General computer skills and familiarity with email and internet use • Organised • Full driving licence • Ability to multitask and work to deadlines

Covering letter and full CV to stuart.kreetzer@rcboreham.co.uk *all applications will be dealt with in complete confidence

R C Boreham and Co is a 3rd generation, family run Farm and Agricultural Dealership in Essex, with over 55 years of trading in the industry behind us.

We run an established 1800 acre contract farming business. We care for the land of our contracting clients, the way we care for ours – to the highest standard.

rcboreham.co.uk

June 2020 www.farmads.co.uk 193

Recruitment & About People.indd 193

21/05/2020 15:35


About People

Recruitment and About People Email: classified@farmersguide.co.uk

Quality manager for Tong’s growth strategy UK potato and vegetable handling equipment manufacturer, Tong Engineering, has announced the appointment of a new quality manager. Denzil Phillips will oversee the company’s customer-focused quality management system across all departments, ensuring maximum quality and consistency throughout. He joins the company with over 30 years of experience in developing, implementing and managing quality management systems, across a variety of manufacturing industry sectors. With extensive previous experience in overseeing quality

assurance of high-end automotive and engine manufacturing processes, working with clients including JCB, Aston Martin, Jaguar and Volvo, Denzil has developed an innate and meticulous dedication to ensuring total quality management, which he will implement across the complete production process at Tong Engineering. Tong’s appointment of a new quality manager to continuously focus on developing, delivering and maintaining its quality assurance programme comes as part of an exciting programme of expansion. This includes building a new state-of-the-art manufacturing facility, due to be fully operational in mid-2020.

Agri-lawyers join legal hall of fame Two lawyers from law firm Hewitsons’ agriculture and rural property team have been inducted into the Legal 500 Hall of Fame, placing them among an elite group of individuals at the top of their respective practice areas. The Legal 500 Hall of Fame, which launched in the UK in 2018, highlights those who receive ‘constant praise by their clients for continued excellence’ and are at ‘the pinnacle of their profession’. To qualify, individuals must have been recommended by the Legal 500 as ‘leaders’ in their respective practice areas for at least eight of the past 10 years.

Hewitsons partner Denise Wilkinson, who heads up the Cambridge-based agriculture and rural property team; and consultant and long-standing former partner Charles Hewitson from the same team, have both been added to the hall of fame. Managing partner Colin Jones said: “This is a thoroughly deserved achievement, not only for Denise and Charles, who have proven themselves to be among the best in their respective areas of legal practice, but for Hewitsons as a firm. The recognition is particularly meaningful, as it is based on many years of exceptional client feedback.”

Former NFU president joins ORC The Organic Research Centre (ORC) has announced the appointment of Tim Bennett as the new chair of its Council of Management, following the retirement of Mike Turnbull. Tim brings more than 40 years’ experience in the food and farming supply chain. As well as running an organic farm in south Wales, he has served as NFU President, chairman of Defra’s dairy Environmental Task Force and chair of the Food Standards Agency. Currently, he is chair of the Centre for Innovation

and Excellence in Livestock. Tim comments: “It was a great honour to be asked to take over the chair of the ORC. I want to thank Mike Turnbull for his incredible efforts over the last few years on behalf of ORC and particularly over the last year in delivering the farm sale that has created the opportunity to invest funds to create a more sustainable organisation.” ORC will implement a robust strategy recognising the value of building solid partnerships that are focused on carrying out the right research and sharing it with the relevant audiences, he adds.

Former JCB manager becomes IAgrE president Paul Hemingway, who held various management roles at JCB before retiring in 2018, has become the new president of the Institution of Agricultural Engineers (IAgrE). Originally from west Wales, Paul studied Agricultural Engineering at Newcastle University and spent two years in Cornwall working as a branch service manager at Ford and New Holland dealer Fulford Trumps. He later joined the engineering department at Harper Adams. He joined JCB in 1989 as a service manager for what was to become the JCB Fastrac, and then

spent the next three decades in a wide variety of management roles in service, parts, training, sales and product marketing. This included a three-year period working with JCB India as vice president – service, in New Delhi. Paul has now come full circle as a visiting lecturer in engineering at Harper Adams University. IAgrE CEO Ed Hansom said: “I wish Paul the very best of luck for his two-year tenure. He has some great ideas, grounded in practical experience, which will definitely move the Institution forward. His connections with JCB and knowledge of the agricultural engineering industry globally will be invaluable.”

NBA appoints interim CEO Neil Shand has taken up the mantle of interim CEO for the National Beef Association (NBA), with immediate effect, after the departure of Chris Mallon earlier this year. Previously CEO of the British Simmental Cattle Society and an NBA trustee, Neil will carry the organisation through until Beef Expo at Darlington, which is planned for later in the year. Commenting on the appointment, NBA chairman Andrew Laughton said: “Neil has been filling the void left by Mr Mallon’s departure since the end of January. During this

time, he has represented NBA members, and the beef industry in general, in a wide range of industry discussions in influential forums, both at national and at government level. “He has overseen a significant lift in the quality, quantity and scope of material produced, and has been particularly effective in raising our profile and making the voice of our members heard on social media. “A recent presence, both in the agricultural press via podcast interviews and in print, and nationally via interviews on national radio and in the mainstream printed press has resulted in a new lease of life in the organisation.”

New head of Bayer Crop Science business Marion McPherson will be the new head of business for Bayer Crop Science in the UK and Ireland, as well as the Nordic countries. She moves back to the UK after a number of crop science leadership roles in Europe, as well as in Bayer’s UK pharmaceutical division. Commenting on her new role, she said: “I am incredibly excited and proud to lead the UK Crop Science team at this crucial time and I look forward to working with the team and our customers to help shape the

future of farming in the UK.” She replaces Michael Muncey, who is retiring from the company this summer, after 32 years in various roles in Germany, Hungary and France, as well as the UK. Michael comments: “I am immensely proud of my last four years back in the UK and Ireland where we have integrated Monsanto and adjusted the organisation to be fit for the future. It has been an honour and privilege to lead the team. I am convinced that with Marion at the helm, Bayer Crop Science can continue to help farmers towards a successful productive, and sustainable future.”

194 www.farmads.co.uk June 2020

Recruitment & About People.indd 194

21/05/2020 15:37


New head of dairy services for Wynnstay

Andrew Knowles has been appointed CEO of Suffolkbased farming co-operative Fram Farmers, a role he will take up in July. With a degree in agricultural management, he has had a long career in agriculture, initially as a farm consultant working with arable businesses in East Anglia, before heading the technical, knowledge transfer and communication teams for AHDB Pork at a challenging time for the industry amid the Foot and Mouth

Nutrition company Wynnstay has announced David Howard as its new head of dairy services – a role that will see him manage the company’s team of specialists and drive its new strategy for dairy services. David has worked in the UK ruminant feed industry for over 12 years, and studied at Harper Adams University. His previous experience includes working as technical manager for a large mineral and supplement business, as well as a ruminant nutritionist

outbreak. He won the prestigious David Black Award in 2015 and has since been pig marketing director of ForFarmers. Fram Farmers’ chairman Andrew Read said: “As we celebrate 60 years, and as one of the few true farmer-owned inputs, purchasing and crop marketing cooperatives to have reached this milestone, we are confident that Andrew will deliver further progress for our members. We are confident that his leadership qualities and strategic experience will help to further develop what we have achieved over the past six decades.”

within the compound feed and blends sector. He has specialised in key areas such as robotic milking, lameness and transition cow management, and he is a qualified Cow Signals Master Trainer. He comments: “The industry is ever-changing, with farming as a whole at the forefront of consumers’ minds. For dairy businesses, there are challenges to face with milk price uncertainty and production changes but it’s a resilient sector. The Wynnstay dairy specialists and I will remain a constant, to support our customers with services and products which fit their business’ strategy.”

Mike Sheldon reappointed AHDB pork chair of the main AHDB board for another two years, ending 9th April 2022. Mike says: “As the pig industry in the UK continues to adjust to new market environments in the wake of both Brexit and Covid-19, I am proud to be able to continue working with AHDB to deliver a difference to the

Case IH appoints new vice president for Europe Case IH has announced the appointment of Ville Mansikkamäki to the role of vice president for Case IH Europe. He will follow Thierry Panadero, who has taken up the position of head of CNH Industrial’s Agriculture Europe Commercial Operations. Announcing the appointment, Mr Panadero stated: “I am delighted to welcome Ville to our company. His 20 years of solid international experience in various sales, marketing, customer support and spare parts roles will make a valuable contribution to the success and development of Case IH in Europe.” Mr Mansikkamäki graduated from the Rauma Institute of Technology in Finland with a Bachelor of Science (BSc) degree in logistics, materials and supply chain management. He joined Valtra Inc as customer service manager in 2001 and gained

an Executive Master of Business Administration (EMBA) degree from the University of Jyväskylä. After a number of roles within Valtra Inc and its parent, Agco Corporation, he held the post of director of sales, Valtra EAME (Europe, Africa, Middle East), in the seven years prior to joining Case IH. His appointment forms part of a wider re-organisation within CNH Industrial under its ‘Transform 2 Win’ corporate development strategy, which will allow its five operating segments to achieve their full potential and transform the Group’s overall structure. This approach will maximise management focus and flexibility, align investment priorities and incentives, meet the respective business needs of each segment, and optimise CNH Industrial’s cost and capital structure. This will put it in an even stronger position to drive profitable growth through significant investments into its products, technologies, operations, employees and channels.

www.farmads.co.uk

farming sector at this time.” This is a ministerial appointment, made by the Defra secretary of state and ministers in the Scottish and Welsh Governments and the Northern Ireland Executive. AHDB’s sector strategy director for pork, Angela Christison, said:

“We are delighted that Mike has been appointed for a second term. This will ensure continuity in our work to support the reputation of British pork here and overseas. In doing so, we can optimise the value of each part of the pig and so too the returns to producers.”

Find Staff – Find a Job! www.4xtrahands.com

69827

UK ministers have reappointed Mike Sheldon as chair of AHDB’s pork sector board for a second consecutive term. As part of his role, Mike will continue to be a member

Tractor Drivers, Sprayer Operators, Fencers, Livestock Workers and all Rural Staff

01284 747292 admin@4xtrahands.com

Need to fill a vacancy?

Need to advertise it before our next issue?

NOT A PROBLEM!

Our Situations Vacant page on the Farmers Guide website is continually updated allowing you to advertise for the right person at the right time for you. To see the current jobs online go to www.farmersguide.co.uk and click the link on the side bar. Just contact our Sales Team to advertise your position with us.

Recruitment and About People — www.farmersguide.co.uk/situations-vacant

Fram Farmers welcomes new CEO

You can, of course, still advertise on these pages in the usual way, with the added bonus that your ad will now also appear on the website. Ads posted on the website will run until the deadline stated (or for one calendar month from date of upload where no application deadline is specified)

June 2020 www.farmads.co.uk 195

Recruitment & About People.indd 195

21/05/2020 15:39


F fo A RE rf D E ar S m er s

Farmers Guide Something to sell or something you need?

Sell and source your used machinery and other requirements here. Include a picture free of charge with your ad* (usual cost ÂŁ14.40). The next issue of Farmers Guide will appear online at www.farmersguide.co.uk To guarantee your FarmAd appears in the July 2020 issue, we need to receive your advert by the 18th June 2020.

Ads are best submitted online at www.farmads.co.uk Or use this form and fax to 01473 691886 or post to: Farmers Guide, Parkside, London Road, Ipswich, IP2 0SS

FREE picture ads for farmers

This form must be signed

I certify that in placing this advertisement I am acting in a private capacity and not offering items purchased for the purpose of re-sale and not in contravention of the 1977 Business Disclosure Order.

Signed: ....................................................................................................................................................................................... Address: ............................................................................................................................................................................................................................................................................................................................... ...........................................................................................................................................................................................................................................................................................................................................................................................

County: ...........................................................................................................................................................................

Postcode:...........................................................................................................Name (in caps):............................................................................................................................................................................................................................................................................................................................................................ Tel No/s: .............................................................................................................................................................................................................................................................................. Email:...................................................................................................................................................................................................................................................

Please print clearly and take care with phone numbers Any comments or suggestions?

Please tell us what you like best or what you would change in Farmers Guide.

Please circle how many people read your copy of Farmers Guide:

1

2

3

4

5

Other (

)

* For a limited period, all picture ads submitted will appear in the magazine free of charge (at our discretion), subject to space availability. FarmAds suspected of being non genuine or from individuals or companies we believe to be trading commercially will not be published.

fg_class_june_20.indd 196

20/05/2020 16:27


LATEST USED STOCK www.chandlersfe.co.uk

RG635

RG6355C

MT755B

MT765B

MT765D

MT775E

£105,000.00

£132,200.00

£36,750.00

£48,750.00

£75,750.00

£105,000.00

720

828

£83,250.00

£109,500.00

2013, 1500 Hrs, 175 HP Speed: 50Km/h Tyre: 380/90R46 80%

LESS THAN

2014, 3850 Hrs, 220 HP Speed:40Km/h 36m Booms

2006, 11880 Hrs, 320 HP Speed: 40Km/h Track: 25 Track %: 30

LESS THAN

1500 1000

312 & Cargo 4X/75

2015, 950 Hrs, 850 HP Tyres: 900/60R38 (80%) 710/60R30 (80%)

2018, 416 Hrs, 135 HP Tyres: 420/70R24 (90%) 540/65R38 (95%)

£149,500.00

£77,500.00

2015, 5994 Hrs, 439 HP Speed: 40Km/h Track: 25 Track %: 90

1000 500

HOURS

KATANA 85

2013, 4634 Hrs, 380 HP Speed: 40Km/h

LESS THAN

1000 500

HOURS

2008, 6755 Hrs, 380 HP Speed: 40Km/h Track: 30 Track %: 50

HOURS

716

716

£91,750.00

£102,500.00

2018, 2031 Hrs, 170 HP Tyres: 480/70R28 (70%) 520/70R38 (70%)

2018, 434 Hrs, 175 HP Tyres: 480/70R28 (90%) 520/85R38 (95%)

LESS THAN

1500 HOURS

2015, 4405 Hrs, 210 HP Tyres: 540/65R30 (60%) 650/65R42 (70%)

LESS THAN

1000 500 HOURS

2016, 4131 Hrs, 280 HP Tyres: 600/70R30 (90%) 710/70R42 (100%)

LESS THAN

1000 500 HOURS

MF 1532M

MF 7624

MF 7715

MF 7718

MF 7720 S

MF 8740 S

32 HP, Tyres: 26 X 12.0012 Turf 13.6-16 Turf *Can be supplied on Ag tyres*

2013, 5412 Hrs, 245 HP Tyres: 600/65R28 (80%) 650/65R42 (95%)

2017, 1689 Hrs, 170 HP Tyres: 480/70R28 (85%) 580/70R38 (90%)

2016, 3005 Hrs, 190 HP Tyres: 540/65R28 (60%) 650/65R38 (60%)

2019, 239 Hrs, 210 HP Tyres: 600/65R28 WA (95%) 650/65R42 WS (95%)

2019, 253 Hrs, 400 HP Tyres: 620/75R30 (95%) 710/75R42 (95%)

£13,575.00

£47,250.00

£59,950.00

£59,000.00

£84,750.00

£158,000.00

LESS THAN

LESS THAN

1000 500

1000 500

HOURS

HOURS

LESS THAN

LESS THAN

1500

1500

HOURS

HOURS

LESS THAN

1500 1000 HOURS

LESS THAN

1500 1000 HOURS

A134LH

N154EV

N174V

T174EA

T174EA

T254V

£59,950.00

£73,000.00

£73,500.00

£74,500.00

£81,250.00

£107,000.00

2018, 250 Hrs, 145 HP Tyres: 440/65R24 (95%) 540/65R34 (95%)

2018, 239 Hrs, 165 HP Tyres: 480/70R28 (95%) 580/70R38 (95%)

2017, 1470 Hrs, 185 HP Tyres: 540/65R28 (80%) 650/60R38 (80%)

2018, 1146 Hrs, 185 HP Tyres: 540/65R28 (80%) 650/65R38 (90%)

2019, 711 Hrs, 185 HP Tyres: 540/65R28 (85%) 650/65R38 (90%)

2017, 600 Hrs, 260 HP Tyres: 600/65R28 (90%) 650/75R38 (90%)

LESS THAN

1500 1000 HOURS

MANITOU MLT634-120

MANITOU 735-120

MANITOU MLT 741

CAT TH407

MF TH.7038

Year: 2016 Powershift Transmission Tyres: 460/70R24 70%

CAT TH220B

Year: 2007 Tyres: 460/70R24 40% 5000 Hrs

£22,500.00

£23,000.00

£55,000.00

£23,950.00

£26,500.00

£56,000.00

MF DM 306-P DISC MOWER

FENDT SLICER 2460 ISL DISC MOWER

FENDT SLICER 3160 TLXKC MOWER

McCONNEL RM-460 BATWING MOWER

MF RB 4180V ROUND BALER

FENDT 4160V XTRA ROUND BALER

£8,350.00

£5,850.00

£10,750.00

£12,950.00

£34,650.00

£32,450.00

Year: 2010 Hydraulic Locking Carriage 460/70 R24’S 20%

Year: 2020

Year: 2019

Year: 2019 3.1m 6 Disc

Year: 2009 MA5 Premium Spec 460/70R24 30%

Year: 2019 4.6m Cut

Year: 2009 Tyres: 500/70 R24 TRELLEBORGS 75%

Year: 2019 Variable Chamber

Year: 2017, 860 Hrs Tyres: 500/70R24 Micheline 90%

Year: 2019 Variable Chamber

Errors and omissions excepted. All prices +VAT

Ag Enquiries ; Graham Peall: 07970 121109 Andrew Elms: 07860 464753 197-198 Back covers.indd 197

19/05/2020 14:34


THE NATION’S CHOICE FOR GREATER YIELDS AND LOW DISTURBANCE

MOUNTED GD DRILL FROM

£33,600*

,8

* OM 0 0

OM

£8

FR

FR ,8 4 £2

OM

0 ,6 £7

FR

00

0*

*

SHORT DISC

SABRE TINE

LD

THE GROWING BUSINESS

01386 49155

ASK ABOUT OUR PAY AS YOU FARM PLANS

WEAVINGMACHINERY.NET

*PRICES EXCLUDE VAT AND DELIVERY

S E E D

D R I L L S

30872_d Back Weaving GD Ad 210x297.indd 1 197-198 covers.indd 198

I

C U L T I V A T O R S

I

F L A I L S

I

H E D G E C U T T E R S

11/05/2020 14:35 10:12 19/05/2020


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.