FEATURES AND BENEFITS OF CELLI POWER HARROWS
15° Rotor timing >> To reduce the horsepower
Fully welded gearbed >> This gives greater rigidity
demand and reduce fuel consumption. Also gives a finer seedbed
and ensure the gears run “true at all times”
One piece rotorshafts >> Forged and heat treated to give greater durability. To ensure perfect sealing the shafts are also hardened where it is in contact with the oil seals
>>
>>
Wide hardened gears For long life. The wider gears allow the torque loadings to spread more evenly. The heat treatment of the teeth gives added resistance to wearing. Double lipped oil seals To ensure a complete seal is achieved. Also featuring an external groove that prevents dirt putting pressure on the seals
Greaseable top bearings >> To ensure they have adequate lubrication at all times, rather than relying only on oil splash from the lower gears
>>
>>
>>
Boron steel blades >> For longer life
High resistant side plates >> The Celli side plates are made out of T1 steel for high resistance to wear and can also cope with large amounts of soil.
Wide spaced apart rotor bearings To give maximum support of the rotorshafts
“We’ve tried all other brands and the Celli has the best side plate system in the world.”
2 year factory warranty To give total peace of mind!
Recent comment from a large NZ Grower
Levelling bars Made of thick rectangular steel beams complete with shock absorbers. Height adjustment by threaded handles.
>> Top bearings fitted with grease nipples for added lubrication >> Rigid one piece welded box section gearbed for greater rigidity
>> Rotor shaft bearings spaced well apart for greater support
>> Heavy 6mm thick steel plate construction on Ranger models. 8mm on Laser, Energy and Maxi models >> Machined one piece rotor shafts
>> Strong locking nuts
>> Efficient stone protector (shaped steel plate) (optional extra)
>> Hardened wide gears
Double sealing system >> + external protecting groove
Heavy bottom counter >> flanges gives greater hold of tynes
SECTION VIEW OF THE CELLI POWER HARROW MODELS
>> 280mm x 12mm on Ranger models. 300mm x 15mm on Laser and Energy models. 330 x 18mm on Maxi models. Blades made from special boron steel optimised a for low horsepower requirement
HORSEPOWER RATINGS
SIZES AVAILABLE
110HP Single Speed
2m, 2.5m, 3.0m
125HP 4 Speed Gearbox
2m, 2.5m, 3.0m
Laser
150HP
2.5m, 3.0m
Energy
200HP
3.0m, 3.5m, 4.0m
Maxi
250HP
3.0m, 3.5m, 4.0m, 4.5m
Ranger Super Ranger
FOR YOUR NEAREST FA R M G A R D D E A L E R P L E A S E C O N TA C T
NDC : 21 Andrew Baxter Drive Mangere Manukau 2022 PO Box 13-354 Auckland 1643 NZ T. 09 275 5555 // F. 09 256 2220 SDC : 8 Redcastle Road Oamaru 9400 NZ T. 03 437 9000 // F. 03 437 9100
CE37
sales@farmgard.co.nz // farmgard.co.nz
TRUSTED AND PROVEN BRANDS : BERTI // CELLI // STANHAY // FARMGARD RZ RANGE // FIONA // REMAC // PERUZZO BONDIOLI & PAVESI // GRAINSTOR