ÖVERUM P L O U G H S B Y FA R M G A R D
SEMI MOUNTED CONVENTIONAL PLOUGHS DTL
ÖVERUM
Överum DTL Hydraulic Vari-width Conventional Ploughs
> extended frames 115 cm (45”) and high under beam clearance 80 cm (31.5”)
The DTL series has variable ploughing widths ranging from 12” to 20”. The ÖVERUM XL body has a long European low draft moldboard. Less hp, less wear, longer life. The XL is also excellent for both shallow ploughing (4”) and deep ploughing (to 12”). The unique “Mucro” steel treatment, combining a special heat and carbon enrichment process, ensures durability and longer life to wearing parts. Saves you money. Spring cushioned 22” ripple coulters are standard equipment on DTL models. Height adjustment is easily achieved with removal of one bolt, at four adjustment levels. Width of cut is conveniently adjusted from the tractor hydraulics while ploughing.
> mucro treated steel for longer life
> rippled coulter for clean furrow cutting
DTL SEMI MOUNTED CONVENTIONAL PLOUGHS
Ploughing width hydraulically adjustable “on the go” 12” to 20”. This feature also provides for narrow transport during road travel. Adjustable hydraulic trip system is self contained with an accumulator to maintain even trip pressure under varying soil conditions. Cylinder wear surface not exposed to assure longer life. DTL ploughs are equipped with hydraulic steering, providing positive control from the front headstock.
> adjustable trip hydraulics
The front cylinder enables smooth turning of the rear sections of the plough while minimizing wearing points. The oil in the hydraulic system also acts as a cushion during movement. A large diameter rear wheel provides for consistent depth control. Selection of “in furrow” or “on land” positions available. An optional side mounted gauge wheel is also available for maximum stability and depth control.
> hydraulic steering
> in the furrows
> ploughing width control
DTL SEMI MOUNTED CONVENTIONAL PLOUGHS
ÖVERUM
> överum ploughs are designed and built from a legacy of överum plough technology. modern metalurgical and production techniques have resulted in the highest quality, yielding precision, strength and performance
ÖVERUM DTL HYDRAULIC VARI-WIDTH PLOUGHS TECHNICIAL SPECIFICATIONS
DTL4119
DTL5119
DTL6119
DTL7119
DTL8119
4
5
6
7
8
1691/3720
2007/4415
2243/4395
2554/5619
2855/6281
12 - 20
12 - 20
12 - 20
12 - 20
12 - 20
hyd
hyd
hyd
hyd
hyd
Fore and after clearance (cm/inches)
115 / 45
115 / 45
115 / 45
115 / 45
115 / 45
Underbeam clerance (cm/inches)
80 / 31.5
80 / 31.5
80 / 31.5
80 / 31.5
80 / 31.5
n/a
n/a
n/a
n/a
n/a
50 - 110
60 - 120
75- 130
90 - 160
100 - 185
72 - 150
90 - 190
108 - 225
125 - 260
140 - 300
Main frame - 8” x 8” x 7/16”
Weight (kg/lbs) Working width (inches) hyd vari Trip version
Extention Recommended tractor kW Recommended tractor hp
FOR YOUR NEAREST FA R M G A R D D E A L E R P L E A S E C O N TA C T
NDC : 21 Andrew Baxter Drive Mangere Manukau 2022 PO Box 13-354 Auckland 1643 NZ T. 09 275 5555 // F. 09 256 2220 SDC : 8 Redcastle Road Oamaru 9400 NZ T. 03 437 9000 // F. 03 437 9100 sales@farmgard.co.nz farmgard.co.nz
TRUSTED AND PROVEN BRANDS : BERTI // CELLI // STANHAY // FARMGARD RZ RANGE // AB RANGE // ÖVERUM // REMAC PERUZZO // BONDIOLI & PAVESI // GRAINSTOR
OR01
Number of furrows